Single-line Systems for Commercial Vehicles

Single-line Systems for Commercial Vehicles for grease, NLGI grades 000, 00
Fittings and auxiliary equipment
Tubing
��
�
���
�
Steel tubing, galvanized
Minimum bending radius r
bent with bent with
Order No. øda s ødi mandrel grooved disk
WV-RO4x0.7VERZI 4 0.7 2.6 6 –
WV-RO6x0.7VERZI 6 0.7 4.6 22 16
WV-RO8x0.7VERZI 8 0.7 6.6 42 22
WV-RO10x0.7VERZI 10 0.7 8.6 71 27
Diesel injection pipe
DIN73000A2-6ST30AL 6 2.0 2.0 22 16
Plastic tubing WVN715, unplasticized/semi-rigid as per DIN 73 378
Minimum
Perm.
operating Rupture
bending pressure pressure
Order No. øda s ødi radius r (bars) (bars)
WVN715-RO10x1.5+A89
Color: black
10 1.5 7 89 47 141
Plastic tubing WVN716, flexible as per DIN 73 378
Perm.
Minimum operating Rupture
bending pressure pressure
Order No. øda s ødi radius r (bars) (bars)
WVN716-RO4x0.85* 4 0.85 2.3 38 36 108
WVN716-RO6x1.25 6 1.25 3.5 63 35 105
WVN716-RO10x2 10 2 6 60 34 102
*) The WVN716-RO4x0.85 plastic tubing can be supplied in various colors and also filled with grease
NLGI grades 000 or 00.
The following color key information to be added to the order No. applies in this case:
Color key –
Color key tubing filled with grease
A 87 = green AF 1 = natural color
A 88 = red AF 4 = brown
A 89 = black AF 6 = black
A 90 = brown AF 7 = red
without color key: natural color AF 8 = green
Order examples
Plastic tubing WVN716-RO4x0.85, color black, 5 m long:
Order No. WVN716-RO4x0.85+A89, 5 m
Plastic tubing WVN716-RO4x0.85, color green, filled with fluid grease, NLGI grades 000 or 00, 8 m long:
Order No WVN716-RO4x0.85+AF8, 8 m
Note!
For plastic tubing joints, only use unions with reinforcing sockets.
34 1-9420-EN