Envoy-User-Manual

More documents

Recommendations

Info

ENVOY REMOTE TELEMETRY UNIT QUICK START USER MANUAL TABLE OF CONTENTS 1 Introduction ......................................................................................................................................................... 3 2 ENVOY External Features .................................................................................................................................... 4 2.1 LED Indicators....................................................................................................................................................... 5 2.2 Communications................................................................................................................................................... 5 2.2.1 Direct connection ....................................................................................................................................... 5 2.3 Mounting the ENVOY............................................................................................................................................. 5 2.4 ENVOY Uncovered ................................................................................................................................................ 6 2.4.1 ENVOY DIP Switches .................................................................................................................................. 6 2.5 Available Connections........................................................................................................................................... 7 © Copyright by Pentair International Ltd. 2013 Rev1 – September 2013 02 QUICK START USER MANUAL ENVOY
1 INTRODUCTION Greenspan have developed a custom remote telemetry unit for the monitoring and control of most environmental applications. The ENVOY remote telemetry unit combines materials from high-end suppliers, such as Campbell Scientific Inc and Maxon. Integrated into the one package; the ENVOY is a precision device designed for low-power applications. The OEM Campbell Scientific datalogger includes CPU, analogue inputs, digital outputs, and memory, which are controlled by the operating system in conjunction with the user program. The user program is written in CRBASIC, a programming language that includes data processing and analysis routines and a standard BASIC instruction set. Campbell Scientifics datalogger support software facilitates program generation, editing, data retrieval, and realtime data monitoring. The ENVOY is a multi-meter with memory and timekeeping, and an inbuilt 3G cellular modem. The datalogger board is capable of measuring and controlling a wide range of instruments and devices that may be located at the same location. The range of signal types supported by the ENVOY are: • Analogue voltage • Analogue current (An internal switch connects a 100 Ohm shunt resistor.) • Resistive bridges • Pulse output • Period output • Frequency output • SDI-12 sensors • Vibrating wire sensors (a Campbell AWV200 Interface is required) For more about the data logger features, please refer to the Campbell Scientific CR200/CR200X Operators <strong>Manual</strong> (http://s.campbellsci.com/ documents/us/manuals/cr200.pdf). Please note that not all signal inputs and outputs of the CR200X have been included on the ENVOY. Examples of scenarios where an <strong>Envoy</strong> may be used include: ENVOY to ENVAULT Web-Based SCADA YOUR SENSORS + + ENVOY Telemetry Module ENVAULT Web-Based SCADA ENVOY to onsite SCADA (EnviroSCADA) YOUR SENSORS + + ENVIROSCADA ENVOY Telemetry Module ENVAULT Web-Based SCADA QUICK START USER MANUAL ENVOY GREENSPAN 03
Page 1: ENVOY PENTAIR ENVIRONMENTAL SYSTEMS
Page 5 and 6: 2.2 Communications The ENVOY featur
Page 7 and 8: 2.5 Available Connections Input/Out
Page 9: AUSTRALIA New South Wales - Head Of

Envoy-User-Manual

Create successful ePaper yourself

Delete template?

Save as template?