Apex - Catalogue complet

Industrial Hand Tools

Industrial Tools Built 

To Work As Hard As You 

Apex Tool Group serves Manufacturing, Construction, 

Transportation, Energy, Mining, and other industrial 

markets worldwide with high quality hand tools and 

chain products. We offer a wide selection of marketleading 

brands with products specifically designed to 

meet the diverse needs of professional users. 

To help you find what you are looking for quickly and 

easily, we have organized this catalog by product 

category. Each category section is then grouped by 

brand and a brief overview covering the product scope 

of each featured brand is found at the beginning of 

each section. 

Information included in this catalog can also be found 

online at www.apextoolgroup.com. 

Our goal is to continue to provide our customers not 

only with innovative, high quality products, but also with 

applications expertise, programs to improve safety and 

productivity, and the highest level of customer service. 

We thank you for considering Apex Tool Group for your 

industrial hand tool and chain product needs. 

Warranty – Standard Limited Lifetime 

Apex warrants to each original Customer of Products sold by Apex that such Products 

(excluding carrying cases and storage accessories and the product categories set forth 

below) are, at the time of delivery to the Customer, free of material and workmanship 

defects, provided that no warranty is made with respect to: (a) any Product which has 

been modified, disassembled and/or reassembled or altered in any way or improperly 

installed; (b) any Product which has, in Apex’s judgment, been subject to negligence, misuse, 

abuse, accident, improper storage or damage during shipment; (c) any Product which 

has not been operated and maintained in accordance with normal practice and in conformity 

with recommendations and published specifications of Apex; and (d) any Products 

which have been serviced or repaired by anyone other than an Authorized Repair Center of 

Apex or modified by anyone other than Apex. Normal wear and tear is also excluded. 

Product Exceptions to the Standard Limited Lifetime Warranty: 

· Tool Boxes, Standard Chucks and Accessories, Bits, Bit Sockets Torque Products. 

Soldering and De-Soldering Products are warranted only for one (1) year from date of 

Buyer acceptance. 

· Accuracy standards for calibration on Torque Products are warranted for 90 days from 

date of buyer acceptance. Torque Products in North America must be sent to Angle Repair 

& Calibration Service, Inc., 175 Angle Drive, Beckley, West Virginia 25801 (304) 253- 

5729 at Customer’s cost for evaluation. Product meeting warranty criteria will be repaired 

or replaced subject to Apex’s sole discretion. Torque Product components are subject to 

normal wear through use and replacement thereof is the responsibility of the Customer. 

These warranties set forth herein are the sole warranties applicable to Products and is in 

lieu of all other warranties, whether express, implied or statutory. The implied warranties 

of merchantability and fitness for a particular purpose are specifically excluded. 

Remedies: Customer’s sole and exclusive remedy for breach of this Warranty is, at the 

option of Apex, repair or replacement of the defective product.

T A B L E O F C O N T E N T S 

Master Sets 5 

Tool Storage 57 

Ratchets / Sockets / Drive Tools / Sets 85 

Impact Sockets 423 

Allen ® Hex Keys 525 

Wrenches 575 

Torque Wrenches 783 

Screwdrivers / Nut Drivers 807 

Pliers 867 

Cutting 929 

Files 999 

Measuring Products 1037 

Striking / Struck 1081 

Pry Bars / Demolition 1125 

Clamping / Pulling 1135 

Automotive Specialty 

(Formerly ) 

1151 

Jacobs ® Chuck 1241 

Campbell ® Material Handling 1267 

Alpha and Part Number Index 1413 

19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

The Strengths of Our Brands: 

Many Apex Tool Group brands have a history that extends back more 

than 100 years; others had their beginnings more recently. But the 

common threads that tie all our brands together are innovation, quality, 

and value. 

A heritage of quality, driven by innovation. 

Hand tools that provide the highest productivity, 

through speed, strength and access. 

A heritage of high quality and inherent value 

in a broad range of hand tools for Industrial 

applications since 1890. 

The trusted brand with a 

90 year heritage of material 

handling solutions. 

Durable striking products since 1856, 

engineered for superior quality and balance. 

The most recognized brand of files in the world since 1864, 

manufactured to uncompromising standards of quality. 

“The Original” in hex key 

manufacturing with quality and 

dependable products since 1910.

Innovation, Quality, and Value 

A leader in dependable cutting tools 

to help the professional consistently 

get the job done. 

Tough and accurate measuring products 

built for the professional tradesman. 

High-grade manual, hydraulic, 

and pneumatic cutting tools with 

industry leading durability and cutting 

strength for Heavy Industry Professionals. 

The “Safety Matters” Hand 

Tool and Chain Safety Training 

Program is an outstanding 

example of the added value of 

working with Apex Tool Group. 

A global presence as a recognized 

leader in the design and manufacture 

of precision tool and work holding 

devices for stationary equipment and 

portable power tools.

Government/Military Solutions 

Since 1890 Armstrong has been manufacturing reliable, high quality hand 

tools, made in the USA. Our focus on industrial and military applications 

brings us the know-how to deliver innovative, high quality tools and solutions. 

Our commitment to quality is a foundation to our culture and is part of our 

Apex Business System (ABS) that is well known throughout the industry. We 

have various product and service solutions designed to meet all of the tool 

needs for the government and military. 

• UNIQUE TOOLS FOR MILITARY APPLICATIONS* 

• CUSTOM KITS AND SOLUTIONS* 

*Contact your Armstrong distributor or 

representative for guidelines and more details 

Technical Education Solutions 

Starting a new career can be one of the most nerve racking experiences in 

a person’s life. For a technician, starting out can be especially tough when 

making that initial investment in the tools necessary to make a living in the 

future. GearWrench and our Technical Educational Program (TEP) can help 

ease that anxiety. We work with the leading instructors, institutions, and 

OEM manufacturers to ensure that when a student purchases a GearWrench 

TEP kit from an authorized distributor, they have the right tools for the job 

from day one, all without putting the student into severe debt. The bottom 

line is GearWrench provides students with fully featured products at a 

significant value. 

• Fully Featured Innovative Products 

• Discounted Tool Sets and Tool Storage 

• Free Tools for Students and Schools 

• Free Hats, T-Shirts, Posters, etc. 

Auto Body • HVAC • Electrical • Diesel • Hybrids • Wind Energy

M A S T E R S E T S 

Auto Introductory Set........................ 8 

Career Builder Starter Set................. 9 

Diesel Add-On.................................... 11 

Auto Body Add-On............................. 12 

Career Builder HVAC Add-On............. 13 

Intermediate Auto Set....................... 14 

Intermediate Auto Body Set.............. 16 

Intermediate Diesel Set..................... 18 

Aviation Introductory Set.................. 20 

Intermediate Aviation Set.................. 21 

Ultimate Master Tool Sets................. 23 

1 

Master Tool Sets................................ 30 

Intermediate Tool Sets....................... 44 

Basic Tool Sets................................... 48 

General Mechanics Tool Kits (GMTK) 

........................................................... 54 


5


Master Sets 

The GearWrench Technical Education Program features carefully designed sets to fully equip the Student Technician with the tools 

necessary to conquer the service and repair challenges in today’s Automotive, Heavy Duty/Diesel, Machinery, and Aviation fields. 

Each tool set features innovations in speed, access, and design, hallmarks that have established the 

GearWrench ® brand as a leader in quality, professional hand tools. 

Each Technical Education Set also includes storage for sockets, wrenches, screwdrivers, and other tools 

to help promote efficient tool organization. 

M A S T E R S E T S 1 

6


Master Sets 

The Armstrong Industrial Hand Tools Master Set Program allows professional technicians to choose the set that best meets their unique 

demands. Armstrong offers a complete line of fractional and metric sets including single drive size sets and multiple drive size sets that 

range from 1/4" through 1". Each Master Set is designed to include the most popular sizes and innovative new products such as the 

Armstrong Ratcheting Wrench. Whether it’s the 1,165 piece Ultimate Master Set—the largest set in the industrial market — or a 62 

piece Basic Set, each Armstrong set has been developed to help the professional technician accomplish even the most 

difficult industrial application quickly and effectively. That’s the Armstrong Performance Difference. 

Each Master Set provides the professional technician with the ability to select the tool storage system that fits their demands. Choose 

from Industrial Series tool boxes, Standard Series tool boxes—or you can order only the tools and choose the particular box that best 

suits your needs. Every Armstrong tool box is available, including the largest in the industry—the Triple Bay Industrial Series Tool Box. 

1 


7


■■84-Tooth 1/4" and 3/8" Drive Ratchets 

■■Extensions – 1/4" and 3/8" Drive 

■■Universal Joint – 3/8" Drive 

■■Sockets – 1/4" and 3/8" Drive in SAE and Metric Sizes 

■■Wrenches – Long pattern Combination in SAE and Metric Sizes 

■■Screwdrivers – 6 Pc. Set 

■■Pliers – 3 Pc. Set, Punches and Chisels – 5 Pc. set 

■■ALLEN® Hex Key Set – 13 Pc. SAE 

■■General Purpose Tools – Hammers, Utility Knife, Flashlight, 

Locking Pliers, Safety Glasses 

■■Automotive Specialty Tools – Low Voltage Circuit Tester, Feeler 

Gauge, Gasket Scraper 

Auto Introductory TEP Set 

Cat. No. UPC No. Description 

83090* 099575830907 Auto Introductory TEP Set 

* Please Note: Most tools GearWrench branded. May include other leading Apex Tool Group brands. 


Cat. No. Description Cat. No. Description Cat. No. Description 

129D Low-Voltage Circuit Tester 81663 15/16" Long Pattern Combination Wrench 80132 1/4" Drive 6 Point Standard Metric Socket 10mm 

162D Feeler Gauge 81664 1" Long Pattern Combination Wrench 80133 1/4" Drive 6 Point Standard Metric Socket 11mm 

80001 Dual Material Phillips® Screwdriver #1 x 3" 81665 8mm Long Pattern Combination Wrench 80134 1/4" Drive 6 Point Standard Metric Socket 12mm 

80007 Dual Material Phillips® Screwdriver #2 x 4" 81666 9mm Long Pattern Combination Wrench 80135D 1/4" Drive 6 Point Standard Metric Socket 13mm 

80013 Dual Material Slotted Screwdriver 1/4 x 4" 81667 10mm Long Pattern Combination Wrench 80136 1/4" Drive 6 Point Standard Metric Socket 14mm 

80015 Dual Material Slotted Screwdriver 1/8 x 3" 81668 11mm Long Pattern Combination Wrench 80137 1/4" Drive 6 Point Standard Metric Socket 15mm 

80022 Dual Material Slotted Screwdriver 3/8 x 8" 81669 12mm Long Pattern Combination Wrench 80350 3/8" Drive 6 Point Standard SAE Socket 1/4" 

80023 Dual Material Slotted Screwdriver 5/16 x 6" 81670 13mm Long Pattern Combination Wrench 80351 3/8" Drive 6 Point Standard SAE Socket 5/16" 

82011 9-1/2" Tongue and Groove Pliers 81671 14mm Long Pattern Combination Wrench 80352 3/8" Drive 6 Point Standard SAE Socket 3/8" 

82012 7" Diagonal Cutting Pliers 81672 15mm Long Pattern Combination Wrench 80353 3/8" Drive 6 Point Standard SAE Socket 7/16" 

82013 8" Long Nose Pliers 81673 16mm Long Pattern Combination Wrench 80354 3/8" Drive 6 Point Standard SAE Socket 1/2" 

82251 16 oz Ball Pein Hammer - Fiberglass 81674 17mm Long Pattern Combination Wrench 80355 3/8" Drive 6 Point Standard SAE Socket 9/16" 

82260 12 oz Soft face Hammer, Removable Caps 81675 18mm Long Pattern Combination Wrench 80356 3/8" Drive 6 Point Standard SAE Socket 5/8" 

82264 1/2" x 6" x 3/8" Cold Chisel 81676 19mm Long Pattern Combination Wrench 80357 3/8" Drive 6 Point Standard SAE Socket 11/16" 

82270 3/8" x 5" Center Punch 81677 20mm Long Pattern Combination Wrench 80358 3/8" Drive 6 Point Standard SAE Socket 3/4" 

82273 1/8" x 5" x 5/16" Pin Punch 81678 21mm Long Pattern Combination Wrench 80359 3/8" Drive 6 Point Standard SAE Socket 13/16" 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 81679 22mm Long Pattern Combination Wrench 80360 3/8" Drive 6 Point Standard SAE Socket 7/8" 

82275 3/16" x 5-1/2" x 5/16" Pin Punch 81011F 1/4" Drive Full Polish Teardrop Ratchet 80361 3/8" Drive 6 Point Standard SAE Socket 15/16" 

82881 Folding Utility Knife 81211F 3/8" Drive Full Polish Teardrop Ratchet 80362 3/8" Drive 6 Point Standard SAE Socket 1" 

83132 LED Flashlight with Carry Case 80105 1/4" Drive 6 Point Standard SAE Socket 3/16" 80374 3/8" Drive 6 Point Standard Metric Socket 6mm 

84083 1" Wide Scraper Long 80106 1/4" Drive 6 Point Standard SAE Socket 7/32" 80375 3/8" Drive 6 Point Standard Metric Socket 7mm 

C10CV 10" Curved Jaw Locking Plier With Wire Cutter 80107 1/4" Drive 6 Point Standard SAE Socket 1/4" 80376 3/8" Drive 6 Point Standard Metric Socket 8mm 

- Safety Glasses 80108 1/4" Drive 6 Point Standard SAE Socket 9/32" 80377 3/8" Drive 6 Point Standard Metric Socket 9mm 

56603G 13 Piece Long Arm SAE Hex Key Set 80109 1/4" Drive 6 Point Standard SAE Socket 5/16" 80378 3/8" Drive 6 Point Standard Metric Socket 10mm 

81128 1/4" Socket Driver 80110 1/4" Drive 6 Point Standard SAE Socket 11/32" 80379 3/8" Drive 6 Point Standard Metric Socket 11mm 

81113D 1/4" Drive Standard Extension 3" 80111 1/4" Drive 6 Point Standard SAE Socket 3/8" 80380 3/8" Drive 6 Point Standard Metric Socket 12mm 

81116 1/4" Drive Standard Extension 6" 80112 1/4" Drive 6 Point Standard SAE Socket 7/16" 80381 3/8" Drive 6 Point Standard Metric Socket 13mm 

81241 3/8" Drive Standard Extension 3" 80113D 1/4" Drive 6 Point Standard SAE Socket 1/2" 80382 3/8" Drive 6 Point Standard Metric Socket 14mm 

81242 3/8" Drive Standard Extension 6" 80114D 1/4" Drive 6 Point Standard SAE Socket 9/16" 80383 3/8" Drive 6 Point Standard Metric Socket 15mm 

81656 1/2" Long Pattern Combination Wrench 80125 1/4" Drive 6 Point Standard Metric Socket 4mm 80384 3/8" Drive 6 Point Standard Metric Socket 16mm 


81658 5/8" Long Pattern Combination Wrench 80127 1/4" Drive 6 Point Standard Metric Socket 5.5mm 80386 3/8" Drive 6 Point Standard Metric Socket 18mm 


81660 3/4" Long Pattern Combination Wrench 80129 1/4" Drive 6 Point Standard Metric Socket 7mm 80402 3/8" Drive Spark Plug Socket 5/8" 

81661 13/16" Long Pattern Combination Wrench 80130 1/4" Drive 6 Point Standard Metric Socket 8mm 80403 3/8" Drive Spark Plug Socket 13/16" 

81662 7/8" Long Pattern Combination Wrench 80131D 1/4" Drive 6 Point Standard Metric Socket 9mm 80549 3/8" Drive Universal Joint 

8


■■84-Tooth 1/4", 3/8" and 1/2" Drive Ratchets 

■■Extensions – 1/4", 3/8" and 1/2" Drive 

■■Universal Joint – 1/4", 3/8" and 1/2" Drive 

■■Sockets – 1/4" and 3/8" Drive in Standard and Deep, SAE and 

Metric, 1/2" Drive in Standard Length SAE and Metric 

■■Wrenches – Long pattern Combination in SAE and Metric Sizes 

■■Screwdrivers – 12 Pc. Set, Files – 4 Pc. Set 

■■Pliers – 4 Pc. Set, Punches and Chisels – 12 Pc. set 

■■ALLEN® Hex Key Set – 13 Pc. SAE, 9 Pc. Metric 

■■General Purpose Tools – Pry Bar, Hammers, Utility Knife, 

Flashlight, Locking Pliers, Safety Glasses, Tape Measure 


Gauge, Gasket Scraper, and More 

Career Builder Starter TEP Set 

1 


83091* 099575830914 Career Builder Starter TEP Set 


Cat. No. Description 

129D Low-Voltage Circuit Tester 

162D Feeler Gauge 

2109D 2-1/4" Round Telescoping Mirror 

80965 12” Cushion Grip High Tension Hacksaw Frame 

82011 9-1/2" Tongue and Groove Pliers 

82012 7" Diagonal Cutting Pliers 

82013 8" Long Nose Pliers 

82014 8" Slip Joint Pliers 

82216 16 in. Indexing Pry Bar 

82251 16 oz Ball Pein Hammer - Fiberglass 

82255 3 lb Drilling Hammer 

82259 16 oz Rubber Mallet - Wood Hickory Handle 

82260 12 oz Soft face Hammer, Removable Caps 

82261 1/4" x 4-3/4" x 1/4" Cold Chisel 

82262 3/8" x 5" x 5/16" Cold Chisel 

82264 1/2" x 6" x 3/8" Cold Chisel 

82265 5/8" x 6-1/2" x 3/8" Cold Chisel 

82270 3/8" x 5" Center Punch 

82272 3/32" x 4-3/4" x 5/16" Pin Punch 

82273 1/8" x 5" x 5/16" Pin Punch 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 

82275 3/16" x 5-1/2" x 5/16" Pin Punch 

82278 1/8" x 8" x 3/8" Long Taper Punch 

82283 3/16" x 5" x 3/8" Starter Punch 


82285 1/8" x 4-1/2" x 5/16" Starter 

82822D 8" Flat Bastard File 

82823 8" Round Bastard File 

82824 8" Half Round Bastard File 

82825 8" Triangle Bastard File 

82881 Folding Utility Knife 

83132 LED Flashlight with Carry Case 

84083 1" Wide Scraper Long 

C10CV 10" Curved Jaw Locking Plier With Wire Cutter 

C6NV 6" Long Nose Locking Plier With Wire Cutter 

- Safety Glasses 

PS3316 3/4” x 16' Pro Series 3000 Power Return Tape 

80000 Dual Material Phillips® Screwdriver #0 x 2-1/2" 

80001 Dual Material Phillips® Screwdriver #1 x 3" 





2282D Slotted Screw Starter 

80012D Dual Material Slotted Screwdriver 1/4 x 1-1/2" 

80013 Dual Material Slotted Screwdriver 1/4 x 4" 


80018D Dual Material Slotted Screwdriver 3/16 x 6" 




56612G 13 Piece Long Arm SAE Hex Key Set 

56615G 9 Piece Long Arm Metric Hex Key Set 

81128 1/4" Socket Driver 

81113D 1/4" Drive Standard Extension 3" 

81116 1/4" Drive Standard Extension 6" 





81650 1/4" Long Pattern Combination Wrench 

81651D 9/32" Long Pattern Combination Wrench 














9




81664 1" Long Pattern Combination Wrench 

81665 8mm Long Pattern Combination Wrench 















81011F 1/4" Drive Full Polish Teardrop Ratchet 



80105 1/4" Drive 6 Point Standard SAE Socket 3/16" 








80113D 1/4" Drive 6 Point Standard SAE Socket 1/2" 


80115 1/4" Drive 6 Point Deep SAE Socket 3/16" 

80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 









80125 1/4" Drive 6 Point Standard Metric Socket 4mm 


80127 1/4" Drive 6 Point Standard Metric Socket 5.5mm 




80131D 1/4" Drive 6 Point Standard Metric Socket 9mm 








80138 1/4" Drive 6 Point Deep Metric Socket 4mm 


80140 1/4" Drive 6 Point Deep Metric Socket 5.5mm 






80146D 1/4" Drive 6 Point Deep Metric Socket 11mm 

















80362 3/8" Drive 6 Point Standard SAE Socket 1" 


















































80612 1/2" Drive 6 Point Standard SAE Socket 1-1/16" 















80402 3/8" Drive Spark Plug Socket 5/8" 


80100 1/4" Drive Universal Joint 


80600D 1/2" Drive Universal Joint 

10


■■Sockets – 1/2" Drive in Deep SAE and Metric Sizes 

■■Wrenches – Long Pattern Combination in SAE and Metric Sizes 

■■Flare Nut Wrenches – SAE and Metric 

■■Flex Handle – 1/2" Drive 

■■Heavy-Duty Oil Filter Wrenches 

■■General Purpose Tools – Pry bar, Groove Joint Pliers, 

Adjustable Wrench 

Career Builder Diesel Add-on TEP Set 


83092 099575830921 Career Builder Diesel Add-on TEP Set 


2320D Heavy Duty Oil Filter Wrench (3-3/4" to 4-1/2") 81646 13x14mm Flare Nut Wrench 80617 1/2" Drive 6 Point Deep SAE Socket 11/16" 

2321 Heavy Duty Oil Filter Wrench (4-1/2 to 5-1/4") 81647 15x17mm Flare Nut Wrench 80618 1/2" Drive 6 Point Deep SAE Socket 3/4" 

2322D Heavy Duty Oil Filter Wrench (5-1/4-5-3/4) 81648 16x18mm Flare Nut Wrench 80619 1/2" Drive 6 Point Deep SAE Socket 13/16" 

82020D 12" Groove Joint Pliers with Straight Jaw 81649 19x21mm Flare Nut Wrench 80620 1/2" Drive 6 Point Deep SAE Socket 7/8" 

82220 29 in. Extendable Indexing Pry Bar 81733 1-1/16" Long Pattern Combination Wrench 80621 1/2" Drive 6 Point Deep SAE Socket 15/16" 

81893 12" Adjustable Wrench w/Cushion Grip 81734 1-1/8" Long Pattern Combination Wrench 80637 1/2" Drive 6 Point Deep Metric Socket 10mm 

81307 1/2" Drive Full Polish Flex Handle 15" 81735 1-1/4" Long Pattern Combination Wrench 80638 1/2" Drive 6 Point Deep Metric Socket 11mm 

81680 1/4" x 5/16" Flare Nut Wrench 81741 23mm Long Pattern Combination Wrench 80639 1/2" Drive 6 Point Deep Metric Socket 12mm 




81684 5/8" x 3/4" Flare Nut Wrench 81745D 32mm Long Pattern Combination Wrench 80643 1/2" Drive 6 Point Deep Metric Socket 16mm 

81685 3/4" x 7/8" Flare Nut Wrench 80614 1/2" Drive 6 Point Deep SAE Socket 1/2" 80644 1/2" Drive 6 Point Deep Metric Socket 17mm 

81644 9x11mm Flare Nut Wrench 80615 1/2" Drive 6 Point Deep SAE Socket 9/16" 80645 1/2" Drive 6 Point Deep Metric Socket 18mm 

81645 10x12mm Flare Nut Wrench 80616 1/2" Drive 6 Point Deep SAE Socket 5/8" 80646D 1/2" Drive 6 Point Deep Metric Socket 19mm 

1 


11


■■Hammer and Dolly Set – 7 Pc. 

■■Door Pad & Panel Remover Kit – 4 Pc. 

■■Hook and Pick Set – 7 Pc. 

■■Torx® Bit Socket Set 

■■Specialty Tools – Window Molding, Trim Pad Remover 

Tools, Door Handle Window Lift Remover, Push Pin 

Pliers, Scraper Tool, and More 

Career Builder Auto Body Add-on TEP Set 



83093 099575830938 Career Builder Auto Body Add-on TEP Set 


431D Door Handle and Window Lift Remover 84002D 4" Hose Pick Puller 80172 1/4" Drive TORX® Press Fit Bit Socket, T-10 

2038D Window Molding Remover 84003D 4-1/2" Awl 80173 1/4" Drive TORX® Press Fit Bit Socket, T-15 

2106 All-Purpose Scraper and Sticker Remover 84004D 3-1/8" Mini Full Hook 80174 1/4" Drive TORX® Press Fit Bit Socket, T-20 

2311D Shoe Handle Wire Scratch Brush 84005 3-1/8" 90° Mini Hook 80175 1/4" Drive TORX® Press Fit Bit Socket, T-25 

2425D 1-1/4" Scraper 84006 3-1/8" Straight Mini Hook 80176D 1/4" Drive TORX® Press Fit Bit Socket, T-27 

2426D 3" Scraper 84007 3-1/8" Mini Offset Hook 80177D 1/4" Drive TORX® Press Fit Bit Socket, T-30 

2822D Trim Pad Removing Tool 84051 4" V-Notch Puller 80171 1/4" Drive TORX® Press Fit Bit Socket, T-8 

3722 Toe Dolly 84052 4" Square Notch Puller 80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 

3723 Heel Dolly 84053 4" Scraper 80452 3/8" Drive TORX® Press-Fit Bit Socket, T-45 

3724 General Purpose Dolly 84054D 4" Curved Blade V-Notch Puller 80453 3/8" Drive TORX® Press-Fit Bit Socket, T-47 

3725 Wedge Dolly KDS3718 Smooth Faced Cross Chisel Hammer 80454 3/8" Drive TORX® Press-Fit Bit Socket, T-50 

3729 Push Pin Removal Pliers - 30° KDS3719 Smooth Faced Bumping Hammer W/ Square & Round Face 80455 3/8" Drive TORX® Press-Fit Bit Socket, T-55 

84001D 5" Cotter Pin Puller KDS3720 Crossed Face Shrinking Hammer 80667 1/2" Drive TORX® Press Fit Bit Socket, T-60 

12


■■Flex Flare Nut Wrench Sets – 5 Pc. SAE and 6 Pc. Metric 

■■HVAC QuadBox– 2 Sizes 

■■Adjustable Wrench Set – 3 Pc. 

■■Nut driver Set – 7 Pc. SAE 

■■Wiss® Snips – 3 Pc. Set 

■■Tubing Service Set – Including Tubing Cutter, Deburring Tool, 

Tubing Bender and Flaring Tools 

■■Specialty Tools – Hammer, Pipe Wrench, Manifold Set, Torpedo 

Level, Wire Stripper/Crimper 

Career Builder HVAC Add-on TEP Set 

1 


83094* 099575830945 Career Builder HVAC Add-on TEP Set 



29-426 Vinyl Roll 7 Pockets - 9" Level 81694 Flex Flare Nut Wrench 3/8" x 7/16" 

69-350 Curved Claw Hammer, Fiberglass Handle 20 oz. - A/C Manifold Guage Set 81695 Flex Flare Nut Wrench 1/2" x 9/16" 

2107D Mini Tubing Cutter 66-808 Acetate Hollow Shaft Nutdriver 1/4 x 3" 81696 Flex Flare Nut Wrench 5/8" x 11/16" 

2162D Electrical Wire Stripper and Crimper 66-809 Acetate Hollow Shaft Nutdriver 9/32 x 3" 81697 Flex Flare Nut Wrench 3/4" x 7/8" 

2189D Tubing Bender 66-810 Acetate Hollow Shaft Nutdriver 5/16 x 3" 81686 Flex Flare Nut Wrench 9x11mm 

3457 Tubing Cutter 66-811 Acetate Hollow Shaft Nutdriver 11/32 x 3" 81687 Flex Flare Nut Wrench 10x12mm 

3905D Deburring Tool 66-812 Acetate Hollow Shaft Nutdriver 3/8 x 3" 81688 Flex Flare Nut Wrench 13x14mm 

41594 7 Pc. Flaring Adapter Kit 66-814 Acetate Hollow Shaft Nutdriver 7/16 x 3" 81689 Flex Flare Nut Wrench 15x17mm 

41595 Holding Bar 66-816 Acetate Hollow Shaft Nutdriver 1/2 x 3" 81690 Flex Flare Nut Wrench 16x18mm 

41596 Yoke For Flaring Tool 81890 6" Adjustable Wrench w/Cushion Grip 81692 Flex Flare Nut Wrench 19x21mm 

M1R 9 3/4” Metalmaster® Compound Action Snips, Cuts Straight to Left 81891 8" Adjustable Wrench w/Cushion Grip 73-014 Pipe Wrench 14" 

M2R 

9 3/4” Metalmaster® Compound Action Snips, Cuts Straight to 

Right 

81892 10" Adjustable Wrench w/Cushion Grip 85220D 

HVAC QuadBox 1/4" x 3/16" (Square) & 3/8" x 5/16" 

(Square) 

M3R 9 3/4” Metalmaster® Compound Action Snips, Straight, Left, Right 81693 Flex Flare Nut Wrench 1/4" x 5/16" 85221 HVAC QuadBox 1/4" x 3/16" (Square) & 9/16" x 1/2" (Hex) 


13



■■Extensions – 1/4", 3/8" and 1/2" 

■■Universal Joints – 1/4", 3/8" and 1/2" 

■■Sockets – 1/4" and 3/8" Drive in Standard and Deep, SAE 

and Metric, 1/2" Drive in Standard Length SAE and Metric 

■■Wrenches – Long Pattern Combination in SAE and 

Metric Sizes 


■■Pliers – 7 Pc. Set and Double-X, Punches and Chisels – 

12 Pc. set 


■■General Purpose Tools – Hacksaw, Hammers, Utility Knife, 


■■Automotive Specialty Tools – Low Voltage Circuit Tester, 

Feeler Gauge, Gasket Scraper, Screw Starters, Brake 

Tools, Inspection Tools, and More 

Intermediate Auto TEP Set 



83095* 099575830952 Intermediate Auto TEP Set 









82005D Straight Double-X Pliers 


2162D Electrical Wire Stripper and Crimper 



2593 Pocket Telescoping Magnetic Pickup Tool 


82261 1/4" x 4-3/4" x 1/4" Cold Chisel 

2774D Universal Brake Shoe Retaining Spring Tool 


82262 3/8" x 5" x 5/16" Cold Chisel 

2840D 1-1/4" Round Magnifying Mirror with Pocket Clip 82014 8" Slip Joint Pliers 

82264 1/2" x 6" x 3/8" Cold Chisel 

295D Drum Brake Adjusting Tool 

82020D 12" Groove Joint Pliers with Straight Jaw 

82265 5/8" x 6-1/2" x 3/8" Cold Chisel 

298D Brake Spring Pliers 

82025 8" Lineman Pliers 


3151 Universal Convertible Retaining Ring Pliers, Large 82028 8" End Cutting Nipper Pliers 

82272 3/32" x 4-3/4" x 5/16" Pin Punch 

3163D Disc Brake Piston Tool 


82273 1/8" x 5" x 5/16" Pin Punch 

14



82274 5/32" x 5-1/4" x 5/16" Pin Punch 

82275 3/16" x 5-1/2" x 5/16" Pin Punch 



82285 1/8" x 4-1/2" x 5/16" Starter 









2283 Phillips Screw Starter 

















80172 1/4" Drive TORX® Press Fit Bit Socket, T-10 




80176D 1/4" Drive TORX® Press Fit Bit Socket, T-27 



80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 






81307 1/2" Drive Full Polish Flex Handle 15" 







































































































































































1 


15




■■Universal Joint – 1/4", 3/8" and 1/2" Drive 

■■Sockets – 1/4" and 3/8" Drive in in Standard and Deep, 

SAE and Metric, 1/2" Drive in Standard Length SAE 

and Metric 

■■Wrenches – Long Pattern Combination in SAE and 

Metric Sizes 

■■Screwdrivers – 12 Pc. Set, Master Torx® Bit Socket Set 

■■Pliers – 4 Pc. Set and Double-X, Punches and 

Chisels – 12 Pc. set 


■■General Purpose Tools – Hacksaw, Hammers, Utility Knife, 


■■Automotive Specialty Tools – Low Voltage Circuit Tester, 

Gasket Scraper, Inspection Tools, Body Tools, and More 

Intermediate Auto Body TEP Set 



83097* 099575830976 Intermediate Auto Body TEP Set 


Cat. No. 

129D 

2038D 

Description 

Low-Voltage Circuit Tester 

Window Molding Remover 

2106 All-Purpose Scraper and Sticker Remover 

2162D 

2311D 

2425D 

2426D 

Electrical Wire Stripper and Crimper 

Shoe Handle Wire Scratch Brush 

1-1/4" Scraper 

3" Scraper 


2822D 

2840D 

2979 Scriber 

Trim Pad Removing Tool 

1-1/4" Round Magnifying Mirror with Pocket Clip 

3151 Universal Convertible Retaining Ring Pliers, Large 

3718D 

Smooth Faced Cross Chisel Hammer 

3719 

Smooth Faced Bumping Hammer W/ Square & Round 

Face 

3720 Crossed Face Shrinking Hammer 

3722 Toe Dolly 

3724 General Purpose Dolly 

3725 Wedge Dolly 

3729 Push Pin Removal Pliers - 30° 

431D Door Handle and Window Lift Remover 












82261 1/4" x 4-3/4" x 1/4" Cold Chisel 

82262 3/8" x 5" x 5/16" Cold Chisel 

82264 1/2" x 6" x 3/8" Cold Chisel 

82265 5/8" x 6-1/2" x 3/8" Cold Chisel 


82272 3/32" x 4-3/4" x 5/16" Pin Punch 

82273 1/8" x 5" x 5/16" Pin Punch 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 

82275 3/16" x 5-1/2" x 5/16" Pin Punch 



82285 1/8" x 4-1/2" x 5/16" Starter 

82822D 8" Flat Bastard File 







84001D 5" Cotter Pin Puller 

84002D 4" Hose Pick Puller 

84003D 4-1/2" Awl 

84004D 3-1/8" Mini Full Hook 

84005 3-1/8" 90° Mini Hook 

84006 3-1/8" Straight Mini Hook 

84007 3-1/8" Mini Offset Hook 

84051 4" V-Notch Puller 

84052 4" Square Notch Puller 

84053 4" Scraper 

84054D 4" Curved Blade V-Notch Puller 



C11CCSV 11" Locking C-Clamp With Swivel Pads 


M3R 

9 3/4” Metalmaster® Compound Action Snips, Straight, 

Left, Right 







16



















80416 3/8" Drive Hex Bit Socket, 5/32" 






80422 3/8" Drive Hex Bit Socket, 2mm 

80423 3/8" Drive Hex Bit Socket, 2.5mm 





80428D 3/8" Drive Hex Bit Socket, 7mm 






























































































80187 1/4" Drive External TORX® Sockets, E-5 

80188D 1/4" Drive External TORX® Sockets, E-6 
























































80460 3/8" Drive External TORX® Socket, E-10 




























80669D 1/2" Drive External Torx® Socket, E-18 






1 


17




■■Universal Joints – 1/4", 3/8" and 1/2" Drive 

■■Sockets – 1/4" Drive SAE and Metric, 3/8" Drive and 1/2" Drive 

in in Standard and Deep, SAE and Metric 

■■Wrenches – Long Pattern Combination in SAE and Metric Sizes 

■■Screwdrivers – 12 Pc. Set, Torx® Bit Sockets – 13 Pc. Set 

■■Pliers – 4 Pc. Set and Double-X, Punches and Chisels – 

12 Pc. set 


■■General Purpose Tools – Extendable Pry Bar, Hacksaw, 

Hammers, Utility Knife, Flashlight, Locking Pliers, Safety 

Glasses, Tape Measure 


Gauge Gasket Scraper, Inspection Tools, Wire Stripper/Crimper 

and More 

Intermediate Diesel TEP Set 



83096* 099575830969 Intermediate Diesel TEP Set 





2162D Electrical Wire Stripper and Crimper 


2840D 1-1/4" Round Magnifying Mirror with Pocket Clip 








82220 29 in. Extendable Indexing Pry Bar 






82261 1/4" x 4-3/4" x 1/4" Cold Chisel 

82262 3/8" x 5" x 5/16" Cold Chisel 

82264 1/2" x 6" x 3/8" Cold Chisel 

82265 5/8" x 6-1/2" x 3/8" Cold Chisel 


82272 3/32" x 4-3/4" x 5/16" Pin Punch 

82273 1/8" x 5" x 5/16" Pin Punch 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 

18



82275 3/16" x 5-1/2" x 5/16" Pin Punch 



82285 1/8" x 4-1/2" x 5/16" Starter 

















































































81745D 32mm Long Pattern Combination Wrench 































































































































1 


19


■■84-Tooth 1/4" and 3/8" Drive Ratchets, 3/8" Drive 

Speeder Handle 


■■Universal Joints – 1/4" and 3/8" Drive 

■■Sockets – 1/4" and 3/8" Drive Standard and Deep, SAE Sizes 

■■Wrenches – Long Pattern Combination in SAE Sizes 


■■Pliers – 4 Pc. Set 

■■General Purpose Tools – Hammers, Utility Knife, Flashlight, 

Locking Pliers, Ear Muffs, Safety Glasses, Tool Box with Tote 

■■Specialty Tools – Flexible Pickup Tool, Inspection Tools, Wire 

Stripper/Crimper, Scraper, and More 

Aviation Introductory TEP Set 



83080* 099575830808 Aviation Introductory TEP Set 



2162D Electrical Wire Stripper and Crimper 81654 3/8" Long Pattern Combination Wrench 80227 1/4" Drive 12 Point Deep Socket 7/16" 

2282D Slotted Screw Starter 81655 7/16" Long Pattern Combination Wrench 80228 1/4" Drive 12 Point Deep Socket 1/2" 

2283 Phillips Screw Starter 81656 1/2" Long Pattern Combination Wrench 80229 1/4" Drive 12 Point Deep Socket 9/16" 

2391 Flexible Retrieving Tool 81657 9/16" Long Pattern Combination Wrench 80496 3/8" Drive 12 Point Standard SAE Socket 1/4" 

2425D 1-1/4" Scraper 81658 5/8" Long Pattern Combination Wrench 80497D 3/8" Drive 12 Point Standard SAE Socket 5/16" 

2593 Pocket Telescoping Magnetic Pickup Tool 81659 11/16" Long Pattern Combination Wrench 80498 3/8" Drive 12 Point Standard SAE Socket 3/8" 

2840D 1-1/4" Round Magnifying Mirror with Pocket Clip 81660 3/4" Long Pattern Combination Wrench 80499 3/8" Drive 12 Point Standard SAE Socket 7/16" 

2979 Scriber 81661 13/16" Long Pattern Combination Wrench 80500D 3/8" Drive 12 Point Standard SAE Socket 1/2" 

80001 Dual Material Phillips® Screwdriver #1 x 3" 81662 7/8" Long Pattern Combination Wrench 80501 3/8" Drive 12 Point Standard SAE Socket 9/16" 

80007 Dual Material Phillips® Screwdriver #2 x 4" 81663 15/16" Long Pattern Combination Wrench 80502 3/8" Drive 12 Point Standard SAE Socket 5/8" 

80013 Dual Material Slotted Screwdriver 1/4 x 4" 81664 1" Long Pattern Combination Wrench 80503 3/8" Drive 12 Point Standard SAE Socket 11/16" 

80015 Dual Material Slotted Screwdriver 1/8 x 3" 81011F 1/4" Drive Full Polish Teardrop Ratchet 80504 3/8" Drive 12 Point Standard SAE Socket 3/4" 

80022 Dual Material Slotted Screwdriver 3/8 x 8" 81211F 3/8" Drive Full Polish Teardrop Ratchet 80505 3/8" Drive 12 Point Standard SAE Socket 13/16" 

80023 Dual Material Slotted Screwdriver 5/16 x 6" 80210 1/4" Drive 12 Point Standard SAE Socket 3/16" 80506D 3/8" Drive 12 Point Standard SAE Socket 7/8" 

82011 9-1/2" Tongue and Groove Pliers 80211 1/4" Drive 12 Point Standard SAE Socket 7/32" 80507 3/8" Drive 12 Point Standard SAE Socket 15/16" 

82012 7" Diagonal Cutting Pliers 80212 1/4" Drive 12 Point Standard SAE Socket 1/4" 80508 3/8" Drive 12 Point Standard SAE Socket 1" 

82013 8" Long Nose Pliers 80213 1/4" Drive 12 Point Standard SAE Socket 9/32" 80509 3/8 Drive 12 Point Deep SAE Socket 1/4" 

82014 8" Slip Joint Pliers 80214 1/4" Drive 12 Point Standard SAE Socket 5/16" 80510D 3/8 Drive 12 Point Deep SAE Socket 5/16" 

83130 19" Steel Tote Box - Black 80215D 1/4" Drive 12 Point Standard SAE Socket 11/32" 80511 3/8 Drive 12 Point Deep SAE Socket 3/8" 

- Ear Muffs 80216 1/4" Drive 12 Point Standard SAE Socket 3/8" 80512 3/8 Drive 12 Point Deep SAE Socket 7/16" 

- Safety Glasses 80217 1/4" Drive 12 Point Standard SAE Socket 7/16" 80513 3/8 Drive 12 Point Deep SAE Socket 1/2" 

81128 1/4" Socket Driver 80218 1/4" Drive 12 Point Standard SAE Socket 1/2" 80514 3/8 Drive 12 Point Deep SAE Socket 9/16" 

11-935 3/8" Drive Speeder Handle with Polished Handle 80219 1/4" Drive 12 Point Standard SAE Socket 9/16" 80515D 3/8 Drive 12 Point Deep SAE Socket 5/8" 

81113D 1/4" Drive Standard Extension 3" 80220 1/4" Drive 12 Point Deep Socket 3/16" 80516 3/8 Drive 12 Point Deep SAE Socket 11/16" 

81116 1/4" Drive Standard Extension 6" 80221 1/4" Drive 12 Point Deep Socket 7/32" 80517 3/8 Drive 12 Point Deep SAE Socket 3/4" 

81242 3/8" Drive Standard Extension 6" 80222 1/4" Drive 12 Point Deep Socket 1/4" 80518 3/8 Drive 12 Point Deep SAE Socket 13/16" 

81650 1/4" Long Pattern Combination Wrench 80223D 1/4" Drive 12 Point Deep Socket 9/32" 80519 3/8 Drive 12 Point Deep SAE Socket 7/8" 

81651D 9/32" Long Pattern Combination Wrench 80224 1/4" Drive 12 Point Deep Socket 5/16" 80100 1/4" Drive Universal Joint 

81652D 5/16" Long Pattern Combination Wrench 80225 1/4" Drive 12 Point Deep Socket 11/32" 80549 3/8" Drive Universal Joint 

81653 11/32" Long Pattern Combination Wrench 80226 1/4" Drive 12 Point Deep Socket 3/8" 

20


■■84-Tooth 1/4" and 3/8" Drive Ratchets, 3/8" Drive Speeder 

Handle 


■■Universal Joints – 1/4" and 3/8" Drive 

■■Sockets – 1/4" and 3/8" Drive Standard and Deep, SAE Sizes, 

1/4" Drive Flex Sockets 

■■Wrenches – Long Pattern Combination in SAE Sizes 


■■Pliers – 4 Pc. Set, Files – 4 Pc. Set and 6 Pc. Mini Set 

■■Wiss® Snips – 3 Pc. Set 

■■General Purpose Tools – Adjustable Wrenches, Hacksaw, 

Hammers, Utility Knife, Tape Measure, Flashlight, Locking Pliers, 

Ear Muffs, Safety Glasses 

■■Specialty Tools – Flexible Pick-up Tool, Inspection Tools, Wire 

Stripper/Crimper, Snap Ring Pliers, Feeler Gauge, Screw 

Starters, and More 

Intermediate Aviation TEP Set 

1 


21



83098* 099575830983 Intermediate Aviation TEP Set 



Cat. No. 

162D 

2162D 

2309D 

Description 

Feeler Gauge 


Stainless Steel Brush 

2391 Flexible Retrieving Tool 

2425D 



2840D 

2979 Scriber 


3151 Universal Convertible Retaining Ring Pliers, Large 








82261 1/4" x 4-3/4" x 1/4" Cold Chisel 

82262 3/8" x 5" x 5/16" Cold Chisel 

82264 1/2" x 6" x 3/8" Cold Chisel 

82265 5/8" x 6-1/2" x 3/8" Cold Chisel 


82272 3/32" x 4-3/4" x 5/16" Pin Punch 

82273 1/8" x 5" x 5/16" Pin Punch 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 

82275 3/16" x 5-1/2" x 5/16" Pin Punch 



82285 1/8" x 4-1/2" x 5/16" Starter 

82822D 

8" Flat Bastard File 






C5CV 

5" Curved Jaw Locking Plier With Wire Cutter 

9 3/4” Metalmaster® Compound Action Snips, Cuts 

M1R 

Straight to Left 

9 3/4” Metalmaster® Compound Action Snips, Cuts 

M2R 

Straight to Right 


M3R 

Left, Right 

- 4" Flat Mini File 

- 4" Half Round Mini File 

- 4" Knife Mini File 

- 4" Round Mini File 

- 4" Square Mini File 

- 4" Triangle Mini File 


- Ear Muffs 













11-935 3/8" Drive Speeder Handle with Polished Handle 

81891 8" Adjustable Wrench w/Cushion Grip 


































80220 1/4" Drive 12 Point Deep Socket 3/16" 



80223D 1/4" Drive 12 Point Deep Socket 9/32" 




















80509 3/8 Drive 12 Point Deep SAE Socket 1/4" 

80510D 3/8 Drive 12 Point Deep SAE Socket 5/16" 














80262 1/4" Drive 6 Point Flex Socket 3/16" 

80263D 1/4" Drive 6 Point Flex Socket 1/4" 






22


■■May Order With or Without Tool Storage 

■■Fasteners from 1/8" to 2-3/8" and 2mm to 50mm 

■■1/4", 3/8", 1/2", and 3/4" Drive Sockets and Drive Tools 

■■607 Sockets 

■■280 Wrenches 

■■45 Screwdrivers 

■■25 Pliers and Snips 

■■23 Nutdrivers 

■■185 Additional Tools 

1165 Pc. Ultimate Master Set 

1 


23


Cat. No. UPC No. Description Product Weight 

15-000 781412150001 1165 Pc. Ultimate Master Set with Industrial Series Chest and Cabinet 1985.00 lb 

15-001* 781412150063 1165 Pc. Ultimate Master Set 1135.00 lb 

* Please Note: Most tools Armstrong branded. May include other leading Apex Tool Group brands. 


16-790 74" 19 Drawer Triple Bay Roller Cabinet, Industrial Series - Red 

16-888 54" 12 Drawer Top Chest, Industrial Series - Red 


15-001 1165 Pc. Ultimate Master Set 



10-931 1/4" Drive Locking Adapter 

1140D 6 Pc. 3/8" Drive Impact Driver Set 

16-600 16" Plastic Hand Box - Black 

16-657 Steel Case, 27-1/2 in X 11-1/2 in 

16-831 9" Socket Rail Steel 




16-841 1/4" Drive Socket Clips Steel 



16-847D 3/4" Drive Socket Clips Steel 

2153D Ignition File 

2310D Curved Handle Wire Scratch Brush 

28-406 6" Chrome Finish Adjustable Wrench 





67-069 9-1/4" Lineman's Pliers 

67-101 11-1/8" Long Reach High Leverage Diagonal Pliers 

67-113 8" Diagonal Pliers, Heavy Duty 

67-161 6" Diagonal Pliers 

67-183 4-3/16" Diagonal Pliers with Spring 

67-240 11-9/16" Long Reach Chain Nose Pliers 

67-241 11-3/8" Long Reach Bent Chain Nose Pliers 

67-255 5-9/16" Chain Nose Pliers 

67-307 7-1/8" Chain Nose Pliers with Wire Cutters 

67-331 8-5/16" Chain Nose Pliers with Wire Stripper 

67-357 5-7/16" Needle Nose Pliers, Long Thin 

67-401 6-1/4" Chain Nose Pliers, Bent 

67-410 10" Quick Release Locking Plier with Curved Jaw 

67-436 6" Quick Release Locking Plier with Long Nose 

67-460 10" Quick Release Locking Plier with Straight Jaw 

67-503 8" Duckbill Pliers 

67-535 8-1/2" End Cutting Pliers 

67-667 6" Slip Joint Pliers 



67-779 10" Tongue and Groove Pliers 



67-791 12-3/4" Pipewrench Tongue & Groove Pliers 

67-830 5-1/4" Midget Angle Nose Ignition Pliers 

67-905 8-5/8" Electrician's Stripper/Cutter/Crimper Pliers 

68-079 6 Pc. Internal/External Convertible Pliers Set 

69-009 Soft Face Hammer, Fiberglass Handle 12 oz. 

69-019 Soft Face Hammer, Fiberglass Handle 2 lb. 

69-155 Soft Face Hammer Tip 1-1/2" Tough Green 

69-156 Soft Face Hammer Tip 1-1/2" Med. Hard Cream 

69-158 Soft Face Hammer Tip 1-1/2" Hard Black 

69-165 Soft Face Hammer Tip 2" Tough Green 

69-166 Soft Face Hammer Tip 2" Med. Hard Cream 

69-168 Soft Face Hammer Tip 2" Hard Black 

69-444 Ball Pein Hammer, Hickory Handle 8 oz. 

69-448 Ball Pein Hammer, Hickory Handle 1 lb. 


69-454 Ball Pein Hammer, Hickory Handle 2-1/2 lb. 

69-490 Rubber Mallet, Fiberglass Handle 2 lb. 

69-515 Brass Hammer, Fiberglass Handle 2-1/2 lb. 

69-530 Standard Head One-Piece Dead Blow Hammer 10 oz. 




69-541 Slimline One-Piece Dead Blow Hammer 14 oz. 



69-605 Hand Drilling Hammer, Hickory Handle 3 lb. 

69-625 Cross Pein Hammer, Hickory Handle 3 lb. 

70-000 Punch and Chisel Holder 

70-042 Tool Steel Long Pin Punch 5/32" x 5/16" x 8" 





70-101 Pin Punch 1/16" x 1/4" x 4-1/4" 

70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 

70-105 Pin Punch 1/8" x 5/16" x 5" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-110 Tool Steel Pin Punch 1/16" x 1/4" x 4" 

70-112 Tool Steel Pin Punch 3/32" x 5/16" x 4-1/2" 









70-129 Pin Punch 7/32" x 3/8" x 7" 

70-131 Pin Punch 1/4" x 3/8" x 7" 

70-155 Starting Punch 3/32" x 5/16" x 4-1/2" 

70-157D Starting Punch 1/8" x 5/16" x 4-1/2" 

70-161 Starting Punch 3/16" x 3/8" x 5" 



70-189 Drift Punch 1/8" x 3/8" x 8" 

70-193 Drift Punch 3/16" x 1/2" x 9" 

70-195 Drift Punch 7/32" x 1/2" x 9-1/2" 

70-197 Drift Punch 1/4" x 5/8" x 11" 

70-199 Drift Punch 5/16" x 5/8" x 11" 

70-235 Center Punch 3/8" x 5" 


70-255 Prick Punch 3/8" x 5" 

70-260 Roll Pin Punch 1/16" x 1/4" x 2-3/4" 


70-264 Roll Pin Punch 1/8" x 1/4" x 4" 



70-270 Roll Pin Punch 7/32" x 3/8" x 5" 


70-301 Cold Chisel 1/4" x 1/4" x 5" 

70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-313 Cold Chisel 3/4" x 5/8" x 7" 

70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-317 Cold Chisel 1" x 7/8" x 8" 

70-319 Cold Chisel 1-1/8" x 7/8" x 8" 

70-578 4 Pc. Aligning/Rolling Head Set 

70-579 4 Pc. Pry Bar Set 

Cat. No. 

Description 

70-801 22 Pc. Combination Gauge Set 

70-925 

Inspection Mirror with Telescoping Handle Circular, 

2-1/4" Dia. 

70-929 

Inspection Mirror with Telescoping Handle Rectangular, 

2-1/8" x 3-1/2" Dia. 

70-933 Magnetic Retrieving Tools Chrome Plated, Cushion Grip 

70-950 Screw Extractor 1/8" 





78-408 C-Clamp Deep Throat Pattern, Full Screw, 8" 

80952 10” Heavy Duty Hacksaw Frame 


A9N 12 1/2” Straight Pattern Snips 

M6R 

9 1/4” Metalmaster® Offset Snips, Cuts Straight to Left, 

Red Grips 

M7R 

9 1/4” Metalmaster® Offset Snips, Cuts Straight to 

Right, Green Grips 

PS3425 1” x 25' Pro Series 3000 Power Return Tape 

WEZSNIP EZ Utility snip 

WK8V Retractable Utility Knife, with 3 Blades, Carded 

66-253 Acetate Cabinet Screwdriver 1/8 x 3" 





66-943 5" Nut Starter, Hex Nuts 

66-150 Acetate Phillips® Screwdriver #2 x 1.5" 

66-152 Acetate Phillips® Screwdriver #0 x 2" 







66-524 

Cushion Grip, Round Shank Phillips® Screwdriver #1 

x 3" 

66-527 


x 4" 

66-530 


x 6" 

66-933 5" Screw Starter, Phillips Screws 

66-202 Acetate Slotted Screwdriver 1/8 x 3" 






66-232 Acetate Slotted Screwdriver 1/4 x 1.5" 

66-501 Cushion Grip, Round Shank Slotted Screwdriver 1/4 x 4" 

66-502 

Cushion Grip, Round Shank Slotted Screwdriver 3/16 

x 3" 

66-504 

Cushion Grip, Round Shank Slotted Screwdriver 5/16 

x 6" 



66-924 5" Screw Starter, Slotted Screws 

66-321 Acetate Torx® Screwdriver T10 x 3" 


66-324 Acetate Torx® Screwdriver T15 x 1.250" 


24


Cat. No. 

Description 





66-806 Acetate Hollow Shaft Nutdriver 3/16 x 3" 











66-829 Acetate Hollow Shaft Nutdriver 4 mm x 3" 


66-832 Acetate Hollow Shaft Nutdriver 5-1/2 mm x 3" 









25-508 1/4" Full Polish Flex Combination Wrench 12 Point 











25-600 10 Pc. Midget Combination Wrench Set 

56134 11 Pc. SAE/Metric Ball Plus Cushion Grip T Handle Set 

56192 22 Piece Long Arm SAE/Metric Hex Key Set 

10-938 1/4" Drive T-Handle 5" 

10-943 1/4" Drive Plastic Handle Driver 6" 



11-943 3/8" Drive (Male/Female) Plastic Handle Driver 6" 

64-042 

3/8" Drive Micrometer Torque Wrench (100 in/lb - 1000 

in/lb) 

12-935 1/2" Drive Speeder 19" 

12-938 1/2" Drive T-Handle 

12-948 1/2" Drive Stud Remover, 1/2 - 3/4" Stud Capacity 

64-086 

1/2" Drive Micrometer Torque Wrench (25 ft/lb - 250 

ft/lb) 

64-407 1/2" Drive Dial Torque Wrench, Ratchet Head 

12-892 1/2" Drive Screwdriver Drag Link Socket 7/64" x 15/16" 

12-893 1/2" Drive Screwdriver Drag Link Socket 3/32" x 1-1/4" 

13-938 3/4" Drive T-Handle 20" 

11-951 3/8" Drive Adapter 3/8" F x 1/4" M 



10-745 1/4" Drive Extra Long Hex Driver Socket 5/64" Bit 










37-703 1/4" Drive Standard Length Hex Driver Socket 2mm Bit 


37-704 1/4" Drive Standard Length Hex Driver Socket 2.5mm Bit 





10-821 1/4" Drive Phillips Screwdriver Socket #1 



10-801 1/4" Drive Scredriver Socket 3/16" x 1/32" Tip 


10-870 1/4" Drive Standard Length Torx Driver Socket T10 






11-708 3/8" Drive Standard Length Hex Driver Socket 1/8" Bit 





















38-747 3/8" Drive Extra Long Hex Driver Socket 4mm Bit 










11-802 3/8" Drive Screwdriver Socket 1/4" x 1/32" Tip 






11-878D 3/8" Drive Standard Length Torx Driver Socket T27 













12-754D 1/2" Drive Extra Long Hex Driver Socket 5/16" Bit 






39-711 1/2" Drive Standard Length Hex Driver Socket 6mm 






39-751 1/2" Drive Extra Long Hex Driver Socket 6mm 



















27-510 3/8" 12 Point Full Polish Double Box Ratcheting Wrench 





27-515 

11/16" 12 Point Full Polish Double Box Ratcheting 

Wrench 


54-510 10mm 12 Point Full Polish Double Box Ratcheting Wrench 










10-918 1/4" Drive Breaker Bar 5-3/4" 


12-917 1/2" Drive Breaker Bar 12" 



CW12H 12" Chain Wrench 

11-850 3/8" Drive Crowfoot Wrench 3/8" 









38-850 3/8" Drive Crowfoot Wrench 10mm 











1 


25



Cat. No. 

Description 



12-860 1/2" Drive Crowfoot Wrench 1" 

12-861 1/2" Drive Crowfoot Wrench 1-1/16" 





27-343 

12 Point Full Polish 45° Offset Long Box Wrench 3/8 

x 7/16" 

27-367 


x 9/16" 

27-394 


x 11/16" 

27-424 


x 7/8" 

27-451 


x 1" 

27-466 

12 Point Full Polish 45° Offset Long Box Wrench 1-1/16 

x 1-1/8" 

54-322 12 Point Full Polish 45° Offset Box Wrench 8 x 9mm 









10-921 1/4" Drive Extension 2" 




10-929 1/4" Drive Flex Extension 6" 






11-929 3/8" Drive Flex Extension 7-1/4" 








25-412 

3/8" Full Polish Extra Long Pattern Combination Wrench 

12 Point 

25-414 


12 Point 

25-416 


12 Point 

25-418 


12 Point 

25-420 


12 Point 

25-422 

11/16" Full Polish Extra Long Pattern Combination 

Wrench 12 Point 

25-424 


12 Point 

25-426 



25-428 


12 Point 

25-430 



25-432 

1" Full Polish Extra Long Pattern Combination Wrench 

12 Point 

25-162 3/8" Full Polish Stubby Combination Wrench 12 Point 








52-160 10mm Full Polish Stubby Combination Wrench 12 Point 










11-842 3/8" Drive Flare Nut Crowfoot Wrench 5/8" 






11-848 3/8" Drive Flare Nut Crowfoot Wrench 1" 

11-849 3/8" Drive Flare Nut Crowfoot Wrench 1-1/16" 
















28-130 Full Polish Double Head Flare Nut Wrench 3/8 x 7/16" 



28-145 Full Polish Double Head Flare Nut Wrench 3/4 x 1" 

28-150 Full Polish Double Head Flare Nut Wrench 7/8 x 1-1/8" 

19-608 3/8" Drive 6 Point Impact Socket 1/4" 









19-708 3/8" Drive 6 Point Deep Impact Socket 1/4" 









46-607 3/8" Drive 6 Point Impact Socket 7mm 

















46-707 3/8" Drive 6 Point Deep Impact Socket 7mm 

















20-028D 1/2" Drive 6 Point Impact Socket 7/8" 


20-032 1/2" Drive 6 Point Impact Socket 1" 

20-034D 1/2" Drive 6 Point Impact Socket 1-1/16" 
























47-210D 1/2" Drive 6 Point Deep Impact Socket 10mm 





47-215D 1/2" Drive 6 Point Deep Impact Socket 15mm 









19-947 3/8" Drive Impact Armstrong MAXX Universal Joint 

19-562 

3/8" Drive 6 Point Armstrong MAXX Universal Impact 

Socket 3/8" 

19-564 


Socket 7/16" 

19-566 


Socket 1/2" 

26


Cat. No. 

Description 

19-568 


Socket 9/16" 

19-570 


Socket 5/8" 

19-572 


Socket 11/16" 

19-574 


Socket 3/4" 

20-566 


Socket 1/2" 

20-568 


Socket 9/16" 

20-570 


Socket 5/8" 

20-572 


Socket 11/16" 

20-574 


Socket 3/4" 

20-576 


Socket 13/16" 

20-578 


Socket 7/8" 

20-580 


Socket 15/16" 

20-582 


Socket 1" 

25-208 

1/4" Full Polish Long Pattern Combination Wrench 12 

Point 

25-210 

5/16" Full Polish Long Pattern Combination Wrench 

12 Point 

25-212 


Point 

25-214 


12 Point 

25-216 


Point 

25-218 


12 Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 

25-232 1" Full Polish Long Pattern Combination Wrench 12 Point 

25-234 

1-1/16" Full Polish Long Pattern Combination Wrench 

12 Point 

25-236 


12 Point 

25-240 


12 Point 

25-242 

1-5/16" Satin Chrome Long Pattern Combination Wrench 

12 Point 

25-244 


12 Point 

25-246 


12 Point 

25-248 


12 Point 

25-252 


12 Point 

25-254 

1-11/16" Satin Chrome Long Pattern Combination 


25-256 


12 Point 

25-258 

1-13/16" Satin Chrome Long Pattern Combination 


25-260 


12 Point 

Cat. No. 

25-264 

52-207 

52-208 

52-209 

52-210 

52-211 

52-212 

52-213 

52-214 

52-215 

52-216 

52-217 

52-218 

52-219 

52-220 

52-221 

52-222 

52-223 

52-224 

27-903 

27-907 

27-904 

27-908 

27-909 

27-910 

27-911 

27-812 

27-912 

27-814 

27-816 

27-818 

27-820 

27-822 

27-824 

27-826 

27-828 

27-830 

27-832 

Description 

2" Satin Chrome Long Pattern Combination Wrench 

12 Point 

7mm Full Polish Long Pattern Combination Wrench 12 

Point 


Point 


Point 

10mm Full Polish Long Pattern Combination Wrench 

12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 

13/64" Open End Full Polish 15 and 80° Miniature Angle 

Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 

3/8" Open End Full Polish 15 and 60° Full Polish Angle 

Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 

1" Open End Full Polish 15 and 60° Full Polish Angle 

Wrench 


27-834 

1-1/16" Open End Full Polish 15 and 60° Full Polish 

Angle Wrench 

27-836 

1-1/8" Open End Full Polish 15 and 60° Full Polish Angle 

Wrench 

27-840 


Wrench 

26-022D Full Polish Open End Wrench 1/4 x 5/16" 

26-043 Full Polish Open End Wrench 3/8 x 7/16" 





26-163 Full Polish Open End Wrench 1 x 1-1/8" 

26-169 Full Polish Open End Wrench 1-1/16 x 1-1/4" 

26-187D Full Polish Open End Wrench 1-5/16 x 1-1/2" 


53-016 Full Polish Open End Wrench 6 x 7mm 










73-010 Pipe Wrench 10" 



10-945 1/4" Drive Ratchet Spinner 

10-972 1/4" Drive Teardrop Ratchet 

11-915 3/8" Drive Round Head Ratchet Polished Handle 


11-972 3/8" Drive Teardrop Ratchet Polished Handle 7-3/8" 

11-973 3/8" Drive Long Handle Teardrop Ratchet 

11-974 3/8" Drive Flex Head Teardrop Ratchet 

11-978 3/8" Drive Plastic Handle Teardrop Ratchet 

11-979 3/8" Drive Plastic Handle Teardrop Ratchet 

12-915 1/2" Drive Roundhead Ratchet 10-1/2" 





13-972 3/4" Drive Ratchet 

55-310 10mm Black Oxide Flare Nut Ratcheting Wrench 










25-808 1/4" 12 Point Full Polish Combination Ratcheting Wrench 

25-810 

5/16" 12 Point Full Polish Combination Ratcheting 

Wrench 

25-811 


Wrench 


25-814 


Wrench 


25-818 


Wrench 


25-822 


Wrench 


25-004 1/8" Full Polish Regular Combination Wrench 6 Point 


1 


27






52-004 4mm Full Polish Regular Combination Wrench 6 Point 


52-083 5.5mm Full Polish Regular Combination Wrench 6 Point 



















25-132 1" Full Polish Regular Combination Wrench 12 Point 

10-006D 1/4" Drive 6 Point Standard Socket 3/16" 




10-010 1/4" Drive 6 Point Standard Socket 5/16" 






10-206 1/4" Drive 6 Point Deep Socket 3/16" 










37-004 1/4" Drive 6 Point Standard Socket 4mm 


37-083 1/4" Drive 6 Point Standard Socket 5.5mm 




37-009D 1/4" Drive 6 Point Standard Socket 9mm 






37-204 1/4" Drive 6 Point Deep Socket 4mm 


37-283 1/4" Drive 6 Point Deep Socket 5.5mm 


























11-208D 3/8" Drive 6 Point Deep Socket 1/4" 


































































11-132 3/8" Drive 12 Point Standard Socket 1" 













11-332 3/8" Drive 12 Point Deep Socket 1" 
















































12-032D 1/2" Drive 6 Point Standard Socket 1" 

28



12-034 1/2" Drive 6 Point Standard Socket 1-1/16" 

12-036D 1/2" Drive 6 Point Standard Socket 1-1/8" 


















12-234D 1/2" Drive 6 Point Deep Socket 1-1/16" 



12-240 1/2" Drive 6 Point Deep Socket 1-1/4" 























































































































































40-338D 3/4" Drive 12 Point Deep Socket 38mm 




12-504 1/2" Drive Spark Plug Socket with Rubber Insert 13/16" 

10-947 1/4" Drive Universal Joint 


11-512D 3/8" Drive 12-Point Universal Joint 3/8" 

11-514 3/8" Drive 12-Point Universal Joint 7/16" 








12-516 1/2" Drive 12 Point Universal Socket 1/2" 


12-520D 1/2" Drive 12 Point Universal Socket 5/8" 



1 


29


715 Pc. Master Set 


■■Fasteners from 1/8" to 2-3/8" and 2.5mm to 36mm 









30



15-005 781412150056 715 Pc. Master Set with Industrial Series Cabinet 1250.00 lb 

15-006D* 781412150063 715 Pc. Master Set 400.00 lb 


Cat. No. 

Description 

16-790 74" 19 Drawer Triple Bay Roller Cabinet, Industrial Series - Red 

Cat. No. 

Description 

15-006D 715 Pc. Master Set 


10-931 1/4" Drive Locking Adapter 









67-255 5-9/16" Chain Nose Pliers 













67-830 5-1/4" Midget Angle Nose Ignition Pliers 

68-079 6 Pc. Internal/External Convertible Pliers Set 









69-605 Hand Drilling Hammer, Hickory Handle 3 lb. 


70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 

70-105 Pin Punch 1/8" x 5/16" x 5" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-129 Pin Punch 7/32" x 3/8" x 7" 

70-131 Pin Punch 1/4" x 3/8" x 7" 






70-189 Drift Punch 1/8" x 3/8" x 8" 

70-193 Drift Punch 3/16" x 1/2" x 9" 

70-197 Drift Punch 1/4" x 5/8" x 11" 



70-255 Prick Punch 3/8" x 5" 

70-301 Cold Chisel 1/4" x 1/4" x 5" 

70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-313 Cold Chisel 3/4" x 5/8" x 7" 

70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-317 Cold Chisel 1" x 7/8" x 8" 

70-319 Cold Chisel 1-1/8" x 7/8" x 8" 


Cat. No. 

Description 

70-925 

Inspection Mirror with Telescoping Handle Circular, 

2-1/4" Dia. 










M3R 


Left, Right 









66-943 5" Nut Starter, Hex Nuts 







































56134 11 Pc. SAE/Metric Ball Plus Cushion Grip T Handle Set 


56192 22 Piece Long Arm SAE/Metric Hex Key Set 





11-943 3/8" Drive (Male/Female) Plastic Handle Driver 6" 

12-948 1/2" Drive Stud Remover, 1/2 - 3/4" Stud Capacity 

64-086 


ft/lb) 


13-938 3/4" Drive T-Handle 20" 



















































1 


31



Cat. No. 

Description 



































CW12H 

12" Chain Wrench 






















27-343 


x 7/16" 

27-367 

12 Point Full Polish 45° Offset Long Box Wrench 1/2 x 

9/16" 

27-394 


11/16" 

27-424 


x 7/8" 

27-451 


x 1" 

27-466 


x 1-1/8" 



























25-412 


12 Point 

25-414 


12 Point 

25-416 


12 Point 

25-418 


12 Point 

25-420 


12 Point 

25-422 



25-424 


12 Point 

25-426 



25-428 


12 Point 

25-430 



25-432 

1" Full Polish Extra Long Pattern Combination Wrench 

12 Point 



































28-145 Full Polish Double Head Flare Nut Wrench 3/4 x 1" 

28-150 Full Polish Double Head Flare Nut Wrench 7/8 x 1-1/8" 

























20-028D 1/2" Drive 6 Point Impact Socket 7/8" 


20-032 1/2" Drive 6 Point Impact Socket 1" 











25-208 


Point 

25-210 


Point 

25-212 


Point 

25-214 


Point 

25-216 


Point 

25-218 


Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 


25-234 


12 Point 

32


Cat. No. 

25-236 

25-238 

25-240 

25-242 

25-244 

25-246 

25-248 

25-252 

52-207 

52-208 

52-209 

52-210 

52-211 

52-212 

52-213 

52-214 

52-215 

52-216 

52-217 

52-218 

52-219 

52-220 

52-221 

27-903 

27-907 

27-904 

27-908 

27-909 

27-910 

27-911 

27-812 

27-912 

27-814 

27-816 

27-818 

27-820 

27-822 

27-824 

Description 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


Point 


Point 


Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


Wrench 


27-826 


Wrench 

27-828 


Wrench 

27-830 


Wrench 

27-832 

1" Open End Full Polish 15 and 60° Full Polish Angle 

Wrench 

27-834 

1-1/16" Open End Full Polish 15 and 60° Full Polish 

Angle Wrench 

27-836 


Wrench 

27-840 


Wrench 


























11-915 3/8" Drive Round Head Ratchet Polished Handle 



12-915 1/2" Drive Roundhead Ratchet 10-1/2" 


































25-132 1" Full Polish Regular Combination Wrench 12 Point 


































































1 


33
























































































































































34




■■Fasteners from 1/8" to 2-3/8" and 2.5mm to 26mm 








1 


35




15-011* 781412150117 653 Pc. Master Set 364.00 lb 


Cat. No. 

Description 

16-988 54" 13 Drawer Double Bay Roller Cabinet, Industrial Series - Red 

Cat. No. 

Description 

15-011 653 Pc. Master Set 







28-415D 15" Chrome Finish Adjustable Wrench 

3625 5 Ton Ratcheting Puller 















67-777 6-1/2" Tongue and Groove Pliers 




68-016 12 Pc. Qtr-Turn Convertible Retaining Ring Pliers Set 









70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 

70-105 Pin Punch 1/8" x 5/16" x 5" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-129 Pin Punch 7/32" x 3/8" x 7" 

70-131 Pin Punch 1/4" x 3/8" x 7" 






70-189 Drift Punch 1/8" x 3/8" x 8" 

70-193 Drift Punch 3/16" x 1/2" x 9" 

70-197 Drift Punch 1/4" x 5/8" x 11" 



70-255 Prick Punch 3/8" x 5" 

70-301 Cold Chisel 1/4" x 1/4" x 5" 

70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-313 Cold Chisel 3/4" x 5/8" x 7" 

70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-317 Cold Chisel 1" x 7/8" x 8" 

70-319 Cold Chisel 1-1/8" x 7/8" x 8" 


Cat. No. 

Description 

70-929 


2-1/8" x 3-1/2" Dia. 
















M3R 


Left, Right 












































56193 13 Piece Long Arm SAE Hex Key Set 

56194 9 Piece Long Arm Metric Hex Key Set 

10-935 1/4" Drive Speeder 15-3/4" 







64-086 


ft/lb) 



13-938 3/4" Drive T-Handle 20" 
















































36


Cat. No. 

Description 
































CW12H 


28-212 Full Polish Combination Flare Nut Wrench 3/8" 




























27-343 

27-367 

27-394 

27-424 

27-451 


x 7/16" 


9/16" 


11/16" 


x 7/8" 


x 1" 


27-466 


x 1-1/8" 

27-143 

12 Point Full Polish 45° Offset Short Box Wrench 3/8 

x 7/16" 

27-167 


x 9/16" 

27-194 


x 11/16" 

26-643 12 Point Full Polish 15° Offset Box Wrench 3/8 x 7/16" 





26-751 12 Point Full Polish 15° Offset Box Wrench 15/16 x 1" 

26-766 

12 Point Full Polish 15° Offset Box Wrench 1-1/16 x 

1-1/8" 


























25-210 


Point 

25-212 


Point 

25-214 


Point 

25-216 


Point 

25-218 


Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 


25-234 


12 Point 

25-236 


12 Point 

25-240 


12 Point 

25-242 


12 Point 


25-244 


12 Point 

25-246 


12 Point 

25-248 


12 Point 

52-207 


Point 

52-208 


Point 

52-209 


Point 

52-210 


12 Point 

52-211 


12 Point 

52-212 


12 Point 

52-213 


12 Point 

52-214 


12 Point 

52-215 


12 Point 

52-216 


12 Point 

52-217 


12 Point 

52-218 


12 Point 

52-219 


12 Point 

52-220 


12 Point 

52-221 


12 Point 

52-222 


12 Point 

52-223 


12 Point 

52-224 


12 Point 

27-907 


Wrench 

27-904 


Wrench 

27-908 


Wrench 

27-909 


Wrench 

27-910 


Wrench 

27-911 


Wrench 

27-912 


Wrench 

27-914 


Wrench 

27-916 


Wrench 
















1 


37



















28-312 3/8" Black Oxide Flare Nut Ratcheting Wrench 





































































































































































































38












































1 


39



■■Fasteners from 1/8" to 2-3/8" 

■■1/4", 3/8", 1/2", and 3/4" Drive Sockets 

and Drive Tools 









40



15-015 781412150155 448 Pc. Master Set with Industrial Series Chest and Cabinet 800.00 lb 

15-016 781412150162 448 Pc. Master Set with Professional Series Chest and Cabinet 585.00 lb 

15-017* 781412150179 448 Pc. Master Set 400.00 lb 




16-986D 33" 8 Drawer Single Bay Roller Cabinet, Industrial Series - Red 



16-826 26" 5 Drawer Chest, Standard Series - Red 

16-925 26" 6 Drawer Roller Cabinet, Standard Series - Red 



2425D 1-1/4" Scraper 





















67-777 6-1/2" Tongue and Groove Pliers 




68-016 12 Pc. Qtr-Turn Convertible Retaining Ring Pliers Set 









70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 

70-105 Pin Punch 1/8" x 5/16" x 5" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-129 Pin Punch 7/32" x 3/8" x 7" 

70-131 Pin Punch 1/4" x 3/8" x 7" 






70-189 Drift Punch 1/8" x 3/8" x 8" 

70-193 Drift Punch 3/16" x 1/2" x 9" 

70-197 Drift Punch 1/4" x 5/8" x 11" 



70-255 Prick Punch 3/8" x 5" 

70-301 Cold Chisel 1/4" x 1/4" x 5" 

70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-313 Cold Chisel 3/4" x 5/8" x 7" 

Cat. No. 

Description 

70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-317 Cold Chisel 1" x 7/8" x 8" 

70-319 Cold Chisel 1-1/8" x 7/8" x 8" 


70-929 


2-1/8" x 3-1/2" Dia. 















M3R 


Left, Right 













































10-935 1/4" Drive Speeder 15-3/4" 







64-086 


ft/lb) 



13-938 3/4" Drive T-Handle 20" 








































1 


41



Cat. No. 

Description 
















CW12H 


















27-343 


x 7/16" 

27-367 


x 9/16" 

27-394 


11/16" 

27-424 


x 7/8" 

27-451 


x 1" 

27-466 


x 1-1/8" 

27-143 


x 7/16" 

27-167 


x 9/16" 

27-194 


x 11/16" 















25-210 


12 Point 

25-212 


Point 

25-214 


Point 

25-216 


Point 


25-218 


12 Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 


25-234 


12 Point 

25-236 


12 Point 

25-240 


12 Point 

25-242 


12 Point 

25-244 


12 Point 

25-246 


12 Point 

25-248 


12 Point 

27-907 


Wrench 

27-904 


Wrench 

27-908 


Wrench 

27-909 


Wrench 

27-910 


Wrench 

27-911 


Wrench 

27-912 


Wrench 

27-914 


Wrench 

27-916 


Wrench 



































































































42












































































1 


43



■■Fasteners from 1/4" to 2" 

■■3/8", 1/2", and 3/4" Drive Sockets and Drive Tools 







248 Pc. Intermediate Set 



15-035D 781412150353 248 Pc. Intermediate Set with Industrial Series Cabinet 425.00 lb 

15-036D 781412150360 248 Pc. Intermediate Set with Professional Series Cabinet 375.00 lb 

15-037D* 781412150377 248 Pc. Intermediate Set 225.00 lb 




16-986D 33" 8 Drawer Single Bay Roller Cabinet, Industrial Series - Red 


15-037D 248 Pc. Intermediate Set 

15-037D 248 Pc. Intermediate Set 








67-460 10" Quick Release Locking Plier with Straight Jaw 70-000 Punch and Chisel Holder 



70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 



70-105 Pin Punch 1/8" x 5/16" x 5" 



70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 








67-901 8-1/4" Electrician's Stripper/Cutter/Crimper Pliers 70-161 Starting Punch 3/16" x 3/8" x 5" 


68-016 12 Pc. Qtr-Turn Convertible Retaining Ring Pliers Set 70-235 Center Punch 3/8" x 5" 



70-303 Cold Chisel 1/4" x 1/4" x 5" 



70-307 Cold Chisel 7/16" x 3/8" x 6" 



70-309 Cold Chisel 1/2" x 7/16" x 6" 

44


Cat. No. 

Description 

70-393 Cape Chisel 7/32" x 5/16" x 5-5/8" 

70-421 Diamond Point Chisel 3/16" x 3/8" x 5-1/2" 

70-503 Aligning Pry Bar 5/8 in. x 16 in. 

70-519 Rolling Head Bar 1/2" x 15" 

70-565 12 Pc. Punch and Chisel Set 













84001D 

5" Cotter Pin Puller 


M3R 


Left, Right 


























64-086 


ft/lb) 

13-938 3/4" Drive T-Handle 20" 
















27-515 

11/16" 12 Point Full Polish Double Box Ratcheting 

Wrench 





CW12H 12" Chain Wrench 









27-143 


x 7/16" 

27-167 


x 9/16" 

27-194 


x 11/16" 









25-210 


12 Point 

25-212 


Point 

25-214 


Point 

25-216 


Point 

25-218 


12 Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 


25-234 


12 Point 

25-236 


12 Point 

25-240 


12 Point 

25-242 


12 Point 

25-244 


12 Point 

25-246 


12 Point 

25-248 


12 Point 























































































1 


45



■■Fasteners from 4mm to 26mm 

■■1/4", 3/8" and 1/2" Drive Sockets and Drive Tools 







230 Pc. Metric Intermediate Set 



44-015 781412440157 230 Pc. Metric Intermediate Set with Industrial Series Chest 335.00 lb 

44-016 781412440164 230 Pc. Metric Intermediate Set with Professional Series Chest 312.00 lb 

44-017* 781412440171 230 Pc. Metric Intermediate Set 128.00 lb 






44-017 230 Pc. Metric Intermediate Set 

44-017 230 Pc. Metric Intermediate Set 














67-901 8-1/4" Electrician's Stripper/Cutter/Crimper Pliers 70-235 Center Punch 3/8" x 5" 


68-065D Light Duty Retaining Ring Pliers Set 

70-303 Cold Chisel 1/4" x 1/4" x 5" 



70-307 Cold Chisel 7/16" x 3/8" x 6" 



70-309 Cold Chisel 1/2" x 7/16" x 6" 


69-532 Standard Head One-Piece Dead Blow Hammer 21 oz. 70-393 Cape Chisel 7/32" x 5/16" x 5-5/8" 




67-407 7" Quick Release Locking Plier with Curved Jaw 70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 


67-410 10" Quick Release Locking Plier with Curved Jaw 70-105 Pin Punch 1/8" x 5/16" x 5" 



70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 


46


Cat. No. 

Description 









M3R 


Left, Right 

















66-832 Acetate Hollow Shaft Nutdriver 5-1/2 mm x 3" 




















54-510 

10mm 12 Point Full Polish Double Box Ratcheting 

Wrench 

54-511 


Wrench 

54-512 


Wrench 

54-513 


Wrench 

54-514 


Wrench 

54-515 


Wrench 

54-516 


Wrench 

54-517 


Wrench 

54-518 


Wrench 

54-519 


Wrench 












52-207 


12 Point 

52-208 


12 Point 

52-209 


12 Point 

52-210 


12 Point 

52-211 


12 Point 

52-212 


12 Point 

52-213 


12 Point 

52-214 


12 Point 

52-215 


12 Point 

52-216 


12 Point 

52-217 


12 Point 

52-218 


12 Point 

52-219 


12 Point 

52-220 


12 Point 

52-221 


12 Point 

52-222 


12 Point 

52-223 


12 Point 

52-224 


12 Point 








































































































1 


47



■■Fasteners from 3/16" to 2" 

■■1/4", 3/8", 1/2", and 3/4" Drive Sockets 

and Drive Tools 






166 Pc. Basic Set 


48




15-026D 781412150261 166 Pc. Master Set with Professional Series Cabinet 400.00 lb 

15-027D* 781412150278 166 Pc. Basic Set 150.00 lb 



16-984 30" 8 Drawer Single Bay Roller Cabinet, Industrial Series - Red 

15-027D 166 Pc. Basic Set 



15-027D 166 Pc. Basic Set 

Cat. No. 

Description 


















70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 

70-105 Pin Punch 1/8" x 5/16" x 5" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 





70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-307 Cold Chisel 7/16" x 3/8" x 6" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-393 Cape Chisel 7/32" x 5/16" x 5-5/8" 












84001D 



M3R 

9 3/4” Metalmaster® Compound Action Snips, 

Straight, Left, Right 




















13-938 3/4" Drive T-Handle 20" 













25-210 


12 Point 

25-212 


12 Point 

25-214 


12 Point 

25-216 


12 Point 

25-218 


12 Point 

25-220 


12 Point 

25-222 


12 Point 

25-224 


12 Point 

25-226 


12 Point 

25-228 


12 Point 

25-230 


12 Point 

25-232 

1" Full Polish Long Pattern Combination Wrench 12 

Point 

25-234 


12 Point 

25-236 


12 Point 

25-240 


12 Point 








































































1 


49



■■Fasteners from 3/16" to 1-1/4" 

■■1/4", 3/8" and 1/2" Drive Sockets and Drive Tools 









15-055 781412150551 135 Pc. Basic Set with Industrial Series Chest 298.00 lb 

15-056 781412150568 135 Pc. Basic Set with Professional Series Chest 140.00 lb 

15-057* 781412150575 135 Pc. Basic Set 80.00 lb 




15-057 135 Pc. Basic Set 


16-826 26" 5 Drawer Chest, Standard Series - Red 


50


Cat. No. 

Description 














70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 

70-105 Pin Punch 1/8" x 5/16" x 5" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 





70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-307 Cold Chisel 7/16" x 3/8" x 6" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-393 Cape Chisel 7/32" x 5/16" x 5-5/8" 









84001D 



M3R 


Left, Right 
























25-210 


12 Point 

25-212 


Point 

25-214 


12 Point 

25-216 


Point 

25-218 


12 Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 


25-234 


12 Point 

25-236 


12 Point 

25-240 


12 Point 























































1 


51



■■Fasteners from 7mm to 26mm 

■■1/2" Drive Sockets and Drive Tools 






77 Pc. Metric Basic Set 


44-035 781412440355 77 Pc. Metric Basic Set with Hand Box 50.50 lb 

44-036* 781412440362 77 Pc. Metric Basic Set 40.75 lb 


Cat. No. 

Description 

16-605 20" Steel Hand Box - Red 

Cat. No. 

Description 

44-036 77 Pc. Metric Basic Set 












70-105 Pin Punch 1/8" x 5/16" x 5" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-197 Drift Punch 1/4" x 5/8" x 11" 



70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-313 Cold Chisel 3/4" x 5/8" x 7" 








56070D 7 Piece Metal Fold-up Metric Hex Key Set 




Cat. No. 

Description 

52-207 


12 Point 

52-208 


12 Point 

52-209 


12 Point 

52-210 


12 Point 

52-211 


12 Point 

52-212 


12 Point 

52-213 


12 Point 

52-214 


12 Point 

52-215 


12 Point 

52-216 


12 Point 

52-217 


12 Point 

52-218 


12 Point 

52-219 


12 Point 

52-220 


12 Point 

52-221 


12 Point 






























52



■■Fasteners from 3/8" to 7/8" 

■■3/8" Drive Sockets and Drive Tools 







1 


15-075 781412150759 62 Pc. Basic Set with Hand Box 45.50 lb 

15-076* 781412150766 62 Pc. Basic Set 24.25 lb 



16-605 20" Steel Hand Box - Red 

Cat. No. 

Description 












70-105 Pin Punch 1/8" x 5/16" x 5" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-193 Drift Punch 3/16" x 1/2" x 9" 



70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-313 Cold Chisel 3/4" x 5/8" x 7" 





Cat. No. 

Description 


56066 9 Piece Metal Fold-up Inch Hex Key Set 



25-212 

25-214 

25-216 

25-218 

25-220 

25-222 

25-224 

25-226 

25-228 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 


12 Point 























53


■■GMTK Furnished with Heavy Duty Armstrong Tools 

■■PELICAN Case is Proven to Function in the Hottest Deserts 

and the Coldest Arctic Environments 

■■Removable Drawers with Foam Inserts for Tool Control 

■■Rugged Wheel Construction and a Wide Wheelbase Provide 

Durability and Stability 

■■Impact Resistant - Drop Proof up to 5 feet 

■■Waterproof - up to 1 meter 

General Mechanics Tool Kit (GMTK) 


SGMTK1* 781412100013 General Mechanics Tool Kit (GMTK) 103.00 lb 



Cat. No. 

Description 









67-852 10" Electrical Connector Pliers 

12" Wiretwister, Automatic, Diagonal Nose, Right Hand 

68-178 

Twist 

69-408 Ball Pein Hammer, Fiberglass Handle 1 lb. 


70-105 Pin Punch 1/8" x 5/16" x 5" 

70-131 Pin Punch 1/4" x 3/8" x 7" 

70-133 Pin Punch 5/16" x 7/16" x 7" 


70-291 Brass Drift Punch 3/4" x 8" 

70-292 Brass Taper Punch 1/4" x 4" 


70-313 Cold Chisel 3/4" x 5/8" x 7" 

70-515 18" Polished Rolling Head Pry Bar 

70-790 32 Pc. Feeler Gauge Set 

70-920 Inspection Mirror Oval, 1" x 2", Telescoping Handle 


- 1/4" Drive T15 Torx Plus Bit 

- 1/4" Drive T25 Torx Plus Bit 

- 10" Mill File, Flat, American Pattern 

- 12 Pc. Swiss Pattern Hand File Set 

- 7 Drawer Tool Chest 

- 8" Hand File, Round, American Pattern 

- Adjustable File Handle 

- Electrical Test Meter 

- Jab Saw 

- LED Flashlight 

- 6" Machinist's Rule 

- Multi-Tool 

- Oval Sash Brush 

- Padlock 

- Putty Knife 


- Tape Measure 12 Ft/ 3.5 Meter 

- Tote Bag 

66-400 Dual Material Phillips® Screwdriver #1 x 3" 




66-441 Dual Material Slotted Screwdriver 1/4 x 4" 



66-598 

Offset Ratcheting Screwdriver 1/4" Slotted and #2 

Phillips 

66-580 7 Pc. Ratcheting Screwdriver Set 

27-264 7/16 x 1/2 Obstruction / Half Moon Wrench 

27-268 9/16 x 5/8 Obstruction / Half Moon Wrench 





10-952 1/4" Drive Adapter 1/4" F x 3/8"M 

34-301 Adjustable Hook Spanner Wrench 3/4-2" 











10-926 1/4" Drive Locking Extension 3" 







28-430 Satin Finish Double Head Flare Nut Wrench 3/8X 7/16 

28-435 Satin Finish Double Head Flare Nut Wrench 1/2 X 9/16 



25-210 


12 Point 

25-211 


12 Point 

25-212 


Point 

25-214 


12 Point 

25-216 


Point 


25-218 


12 Point 

25-220 


Point 

25-222 


12 Point 

25-224 


Point 

25-226 


12 Point 

25-228 


Point 

25-230 


12 Point 


52-207 


12 Point 

52-208 


12 Point 

52-209 


12 Point 

52-210 


12 Point 

52-211 


12 Point 

52-212 


12 Point 

52-213 


12 Point 

52-214 


12 Point 

52-215 


12 Point 

52-216 


12 Point 

52-217 


12 Point 

52-218 


12 Point 

52-219 


12 Point 

52-221 


12 Point 

52-222 


12 Point 




54



10-992 1/4" Drive Armstrong MAXX Standard Handle Ratchet 


































































■■USMC GMTK Furnished with Heavy Duty Armstrong Tools 

■■PELICAN Case is Proven to Function in the Hottest Deserts 

and the Coldest Arctic Environments 

■■Removable Drawers with Foam Inserts for Tool Control 

■■Rugged Wheel Construction and a Wide Wheelbase Provide 

Durability and Stability 

■■Impact Resistant - Drop Proof up to 5 feet 

■■Waterproof - up to 1 meter 

General Mechanics Tool Kit, US Marine Corps 

1 


SGMTK2* 781412100020 General Mechanics Tool Kit, US Marine Corps 120.00 lb 




SGMTK1 General Mechanics Tool Kit (GMTK) 

54-815 15mm 12 Point Full Polish Reversible Combination Ratcheting Wrench 





66-440 Dual Material Slotted Screwdriver 1/4 x 2.250" 


28-810 5/16" 12 Point Full Polish Reversible Combination Ratcheting Wrench 






























55


■■General Mechanics Tool Kit (GMTK)/Armstrong Box Integrated 

System - Kit/Box Easily affixes to Top or Bottom of MCAT 

■■Powder Coated 14 gauge Industrial Grade Steel, Welded 

Construction, Built to withstand Harsh Environments 

■■Push Handle can be Mounted on Either Side 

■■Removable Mounting Rails Provide Large Versatile Work Surface 

Area 

■■Large Open Bottom for Multiple Storage Options 

■■8” Semi-Pneumatic Wheels Provide Ease of Mobility and 1,000 

lb. Load Rating 

■■Two Roller Bearing Slide Drawers with 75 lbs. Weight Capacity 

can be Locked with Locking Bar 

Armstrong Military Cart (MCAT) 

Cat. No. UPC No. Product Weight 

MCAT09000 043419943049 155.00 lb 

■■Optional Accessory Tools Tray 

General Mechanics Tool Kit, Accessory Tools Tray 



SGMTKA 781412100006 General Mechanics Tool Kit - Accessory Tray 


























56

T O O L S T O R A G E 

XL Series Roller Cabinets.................. 60 

XL Series Chests................................ 60 

XL Tool Carts..................................... 62 

TEP Series Chests.............................. 63 

TEP Series Roller Cabinets................ 64 

Tool Boxes......................................... 66 

Socket Rails and Clips...................... 67 

Magnetic Storage Trays.................... 68 

Industrial Series Cabinets & Chests. 69 

Professional Series Cabinets & Chests 

........................................................... 74 

2 

Standard Series Cabinets & Chests.. 76 

Tool Boxes ........................................ 80 

Socket Rails and Clips...................... 81 

Tool Rolls........................................... 82 

Steel Cases & Tote Trays ................. 84 


57


Tool Storage 

Professionals have come to expect innovation and increased productivity when using GearWrench ® products; with the XL series 

you can continue to expect the same superior design and construction to make you more productive on the job. Choose XL when 

you need a tool storage system that stands up to your growing demands. Formed with rolled over drawer walls, heavy gauge steel 

bodies, and stamped drawer bottoms, the XL series provides the required strength, durability, and rigidity to withstand your 

professional demands. 

GEARWRENCH XL SERIES 

TOOL STORAGE 

A 9 mm top mat provides 

protection and support on 

all cabinets 

Dual gas shocks on all 

lids offer support and 

easily controlled closure 

Trigger Lock drawer system 

keeps drawers in place and 

opens with a natural pull 

operation 

All drawers feature Auto 

Return, which snaps the 

drawers closed in the final 

inches of operation 

High strength side lift 

handles are integrated 

into the box wall for 

added durability and lift 

capacity 

T O O L S T O R A G E 2 

Formed with rolled over 

drawer walls adding 

strength and rigidity 

Double Ball-Bearing 

construction offers 

exceptional load capacity 

and easy slide action 

All drawers come 

with drawer liners 

Barrel style lock and key 

are unique combination 

for security and durability 

Durable powder-coated 

full-polished lacquer 

coating protects against 

scratches and marring 

One set of locking 

casters on all cabinets 

and carts 

58


Tool Storage 

Armstrong ® tool storage products offer a wide variety of roller cabinets, top chests, and storage options for just about any application. 

Armstrong top chests and roller cabinets are available in three distinct series: the Industrial Series, designed for extreme industrial use 

with the largest capacities; the Professional Series, designed for heavy industrial use; and the Standard Series, designed for regular 

industrial use. All Armstrong tool storage units are made to exacting standards and feature perfectly matched components including 

gauge of steel, heavy-duty casters, ball bearing drawer slides, finish, and lock and latching mechanisms. 

INDUSTRIAL SERIES 

TOOL STORAGE 

Interior walls provide rigidity for slides, drawers 

and weight distribution from top to bottom 

Double wall construction increases the rigidity 

of the exterior walls as it interlocks corner posts 

and eliminates corner cracking and racking 

Fully-recessed drawers 

prevent inadvertent 

collisions 

Full drawer extension allows complete 

access to drawer contents 

L-channels reinforce sides 

for stable drawer support 

Floor panel with U-beam construction 

completes the unibody case. This is 

the foundation of the toolbox. 

2 

16 gauge corner 

posts provide 

weight bearing 

support structure 

for the case 

Heavy-duty ballbearing 

slides 

offer smooth 

operation even 

under extreme 

weight loads 


Industrial scratch-resistant finish 

resists scratches and wear, even 

in the most severe industrial 

environments 

Unibody design - minimum 18 gauge steel 

-maintains squareness and allows for 

extra load strength and mobility 

Heavy duty 6" x 2" 

casters maximize 

mobility and durability 

59


■■Trigger Lock Drawer System Keeps Drawers in Place 

■■Ball Bearing Drawer Slides with Auto Return 

■■Drawer Liners in All Drawers (Black Foam) 

■■Brushed Aluminum Handles and Drawer Pulls 

■■Barrel Style Lock 

■■Heavy-Duty Construction 

■■Top Mat 1/3" (9mm) Thick 

■■Set of Locking Casters 

■■High-Gloss Scratch Resistant Powder Coat Finish 

■■Cabinet Body, Middle, and Large Drawers Made from 20-ga 

Steel. Small Drawers Made from 22-ga Steel. 

53" 9 Drawer Roller Cabinet, XL Series 

Cat. No. UPC No. Color Caster Size Storage Volume Width Depth Height Load Weight Drawer Slides Product Weight 

83158 099575831584 Black/Silver 5 in x 2 in 15,661 cubic in. 53.00 in 19.00 in 39.50 in 1760 lb Ball Bearing 326.00 lb 

Drawer Description Drawer Width Drawer Depth Drawer Height Drawer Load Weight 

Full Width - 1 Drawer 48.00 in 15.50 in 3.75 in 132 lb 

Left - 1 Drawer 29.50 in 15.50 in 8.50 in 88 lb 


Left - 2 Drawers 29.50 in 15.50 in 2.25 in 88 lb 

Right - 1 Drawer 16.00 in 15.50 in 11.50 in 132 lb 

Right - 3 Drawers 16.00 in 15.50 in 2.25 in 88 lb 








■■Top Storage for Quick Access to Tools and Supplies 


■■Lift Handles on Side for Portability 

■■Chest Body Made from 20-ga Steel. Drawers Made from 

22-ga Steel. 

42" 8 Drawer Chest, XL Series 

Cat. No. UPC No. Color Storage Volume Width Depth Height Drawer Slides Top Storage Handled Product Weight 

83156 099575831560 Black/Silver 7,814 cubic in. 41.00 in 18.25 in 20.50 in Ball Bearing Yes Yes 167.50 lb 




60











■■Cabinet Body, Middle and Large Drawers Made from 20-ga 

Steel. Small Drawers Made from 22-ga Steel. 


















■■Lift Handles on Side for Portability. Removable Hand Tool Tray 

■■Chest Body Made from 20-ga Steel. Drawers Made from 

22-ga Steel. 

26" 4 Drawer Chest, XL Series 


83154 099575831546 Black/Silver 4,547 cubic in. 26.00 in 16.00 in 19.00 in Ball Bearing Yes Yes 78.90 lb 


Top Tray 17.00 in 6.75 in 1.75 in 20 lb 

4 Drawers 25.75 in 17.50 in 2.75 in 88 lb 

2 


61











■■Cabinet Body Made from 20-ga Steel. Drawers Made from 

22-ga Steel. 
















■■Bottom Tray for Storage of Large Bulky Items 

■■Cart Body Made of 20-ga Steel. Drawers Made of 22-ga Steel 

4 Drawer Tool Cart, XL Series 

Cat. No. UPC No. Color Caster Size Storage Volume Width Depth Height Load Weight Handled Product Weight 

83153 099575831539 Black/Silver 5 in x 2 in 8,585 cubic in. 31.50 in 20.50 in 41.00 in 880 lb Ergonomic 150.40 lb 




1 Drawer 25.50 in 17.50 in 2.75 in 88 lb 


62










■■Bottom Tray for Storage of Large Bulky Items 

■■Cart Body Made of 20-ga Steel. Drawers Made of 22-ga Steel 

2 Drawer Tool Cart, XL Series 

Cat. No. UPC No. Color Caster Size Storage Volume Width Depth Height Load Weight Handled Product Weight 

83152 099575831522 Black/Silver 4 in x 1 in 4,641 cubic in. 31.50 in 20.50 in 36.00 in 880 lb Ergonomic 110.50 lb 



■■Double-Wall Construction for a Sturdy and Durable Frame 

■■Easy-Open Ball-Bearing Drawer Slides 


■■Non-Slip Drawers 


42" 10 Drawer Chest, TEP Series 

2 


83126BK 099575081262 Black 6,457 cubic in. 40.50 in 17.83 in 18.38 in Ball Bearing Yes No 115.00 lb 

83126BU 099575832604 Blue 6,457 cubic in. 40.50 in 17.83 in 18.38 in Ball Bearing Yes No 115.00 lb 

83126OR 099575830266 Orange 6,457 cubic in. 40.50 in 17.83 in 18.38 in Ball Bearing Yes No 115.00 lb 

83126RD 099575831263 Red 6,457 cubic in. 40.50 in 17.83 in 18.38 in Ball Bearing Yes No 115.00 lb 







63







42" 11 Drawer Roller Cabinet, TEP Series 


83127BK 099575830273 Black 5 in x 2 in 12,328 cubic in. 41.50 in 18.75 in 38.25 in 1100 lb Ball Bearing 172.00 lb 

83127BU 099575081279 Blue 5 in x 2 in 12,328 cubic in. 41.50 in 18.75 in 38.25 in 1100 lb Ball Bearing 172.00 lb 

83127OR 099575812705 Orange 5 in x 2 in 12,328 cubic in. 41.50 in 18.75 in 38.25 in 1100 lb Ball Bearing 172.00 lb 

83127RD 099575831270 Red 5 in x 2 in 12,328 cubic in. 41.50 in 18.75 in 38.25 in 1100 lb Ball Bearing 172.00 lb 

















83124BK 099575081248 Black 5,991 cubic in. 26.00 in 17.825 in 20.50 in Ball Bearing Yes Yes 75.00 lb 

83124BU 099575832048 Blue 5,991 cubic in. 26.00 in 17.825 in 20.50 in Ball Bearing Yes Yes 75.00 lb 

83124RD 099575831249 Red 5,991 cubic in. 26.00 in 17.825 in 20.50 in Ball Bearing Yes Yes 75.00 lb 



64













1 Drawer 23 in 16 in 6.50 in 75 lb 

2 Drawers 23 in 16 in 4 in 75 lb 

4 Drawers 23 in 16 in 2 in 75 lb 







2 


83122BK 099575831201 Black 3,171 cubic in. 26.00 in 12.00 in 14.50 in Ball Bearing Yes Yes 41.00 lb 

83122BU 099575083129 Blue 3,171 cubic in. 26.00 in 12.00 in 14.50 in Ball Bearing Yes Yes 41.00 lb 

83122RD 099575831225 Red 3,171 cubic in. 26.00 in 12.00 in 14.50 in Ball Bearing Yes Yes 41.00 lb 





65
















■■Plastic Hand Box with Comfort Grip Handle 

■■Includes Tote Tray and Two Compartments in Lid 

16-1/2" Plastic Tool Box 

Cat. No. UPC No. Color Width Depth Height Storage Volume Product Weight 

83148 099575831485 Red 16.5 in 7.75 in 8.50 in 1,051 cubic in. 3.70 lb 

■■Dual Latch with Lock Clasps 

■■Includes Tote Tray 

19" Steel Tote Box 


83130 099575831300 Black 19 in 6 in 6.50 in 741 cubic in. 11.61 lb 

66


■■All Weather Durable Tote Bag 

■■Tools Pictured Not Included 

16" Tool Bag 


83147 099575831478 3.79 lb 

■■Portable Tool Box with Ball Bearing Drawer Slides 

■■Keyed Center Lock for Security 

■■Includes Cantilever Tray 

■■Top Compartment 2.5" Height 

■■Drawers 2" Height 

20" 3 Drawer Steel Tool Box 


83151 099575831515 Black 20 in 8.5 in 12.00 in 2,040 cubic in. 20.00 lb 

3 Pc. Socket Rail Set 

■■Patented Sliding Clip System Allows for Clips to Slide Within Rail 

and be Configurable 

■■Drilled at End for Easy Attachment to Wall, Workbench, 

or Drawer 

■■Made of Durable Glass Nylon 

2 

Cat. No. UPC No. Drive Size Color Length Product Weight 

83103 099575831034 1/4 in, 3/8 in, 1/2 in Red 19.13 in 1.04 lb 

Socket Rails 

■■Patented Sliding Clip System Allows for Clips to Slide Within Rail 

and be Configurable 

■■Drilled at End for Easy Attachment to Wall, Workbench, 

or Drawer 

■■Made of Durable Glass Nylon 

Cat. No. UPC No. Drive Size Color Length Product Weight 

83105 099575831058 1/4 in Red 12.00 in 0.23 lb 

83109 099575831096 1/4 in Green 12.00 in 0.23 lb 

83106 099575831065 1/4 in Blue 12.00 in 0.23 lb 

83101 099575831010 3/8 in Red 18.00 in 0.37 lb 

83110 099575831102 3/8 in Green 18.00 in 0.37 lb 

83107 099575831072 3/8 in Blue 18.00 in 0.37 lb 

83102 099575831027 1/2 in Red 18.00 in 0.37 lb 

83111 099575830112 1/2 in Green 18.00 in 0.37 lb 

83108 099575831089 1/2 in Blue 18.00 in 0.37 lb 


67


■■Heavy Duty Black Plastic Clips Hold Sockets Firmly 

■■Quantity of 3 per Shelf Pack 

Socket Rail Clips Sets 

Cat. No. UPC No. Drive Size Color Product Weight 

83112 099575081125 1/4 in Black 0.02 lb 

83113 099575831133 3/8 in Black 0.03 lb 

83114 099575081149 1/2 in Black 0.05 lb 

■■Neatly Stores Sockets, Screwdrivers or Other Tools 

■■Magnetic Rail Can Be Mounted on Wall or in Tool Box Through 

Predrilled Holes 

Mag-Rail Magnetic Tool Holders 

Cat. No. UPC No. Length Product Weight 

3155D 082171031557 17.00 in 0.70 lb 

■■Non-Scratch Magnet 

■■Protective Cover 

Universal Magnetic Parts Tray, Circular 


Cat. No. UPC No. Packaging Product Weight Shelf Pack Qty. 

83104 099575831041 Carded 1.80 lb 1 

■■Non-Scratch Magnet 

■■Protective Cover 

■■Mounts Horizontally or Vertically 

Universal Magnetic Parts Tray, Rectangular 

Cat. No. UPC No. Packaging Length Width Product Weight Shelf Pack Qty. 

83115 099575831157 Carded 9-5/8 in 5-11/16 in 2.55 lb 1 

68


■■Made in the USA - Quality and Availability 

■■Industrial Series is Designed for the Heaviest Industrial Use / 

Largest Capacity 

■■Unibody Design Maintains Squareness and Allows for Extra 

Load Strength 

■■Double Wall Construction with internal “L” Channels for 

Increased Drawer Support 

■■Weight Bearing Corner Post Design with “U” Beam Floor Panel 

for increased Rigidity 

■■Scratch Resistant, Durable Powder Coat Finish 

■■6" X 2" Casters for a Load Rating of 3,600 lb. per Cabinet 

■■Full Extension 75 lb. Rated Ball Bearing Slides 

■■Double Slides on Selected drawers 

■■Includes Drawer Liners with a Thick Rubber Top Mat 

74" 19 Drawer Triple Bay Roller Cabinet, 

Industrial Series 


16-790 781412167900 Red 6 in x 2 in 34,140 cubic in. 73.800 in 24.900 in 42.000 in 3600 lb Ball Bearing - 75 lb 820.00 lb 

Drawer Description Drawer Width Drawer Depth Drawer Height 

Full Width - 1 Drawer 48.093 in 22.906 in 3.906 in 

Left - 1 Drawer 16.843 in 22.906 in 2.906 in 

Left - 3 Drawers 16.843 in 22.906 in 1.906 in 

Center - 2 Drawers 28.625 in 22.906 in 2.906 in 



Right - 1 Drawer 16.843 in 22.906 in 3.906 in 


Right - 3 Drawers 16.843 in 22.906 in 1.906 in 

2 

54" 12 Drawer Top Chest, Industrial Series 





Load Strength 



■■Weight Bearing Corner Post for Increased Rigidity 



■■Includes Drawer Liners and Lid Supports 

Cat. No. UPC No. Color Storage Volume Width Depth Height Drawer Liners Drawer Slides Top Storage Product Weight 

16-888 781412168884 Red 19,361 cubic in. 54.375 in 24.900 in 24.500 in Yes Ball Bearing - 75 lb Yes 430.00 lb 



Top Tray 54.250 in 24.906 in 4.125 in 





69






Load Strength 










54" 13 Drawer Double Bay Roller Cabinet, 


















Load Strength 






■■Includes Drawer Liners and Lid Supports 





1 Drawer 28.593 in 16.718 in 2.906 in 

2 Drawers 28.593 in 16.718 in 1.906 in 


70






Load Strength 






■■Includes Drawer Liners and a Thick Rubber Top Mat 

33" 3 Drawer Intermediate Chest, Industrial Series 

Cat. No. UPC No. Color Storage Volume Width Depth Height Drawer Liners Drawer Slides Top Storage Handled Product Weight 

16-622 781412166224 Red 3,211 cubic in. 33.400 in 18.500 in 12.000 in Yes 

Ball Bearing - 

75 lb 


1 Drawer 28.593 in 16.718 in 2.906 in 


No Yes 103.00 lb 





Load Strength 










33" 8 Drawer Single Bay Roller Cabinet, 





1 Drawer 28.593 in 16.718 in 6.531 in 




2 


71







Load Strength 






■■Includes Drawer Liners and a Thick Rubber Top Mat 


16-874 781412168747 Red 5,500 cubic in. 29.680 in 18.500 in 22.600 in Yes Ball Bearing - 75 lb No 180.00 lb 









Load Strength 










30" 8 Drawer Single Bay Roller Cabinet, 







72


20" 8 Drawer Side Cabinet, Industrial Series 





Load Strength 






■■6" X 2" Casters for a Load Rating of 600 lb. per Cabinet 







1 Drawer 14.625 in 22.906 in 6.031 in 




19" 7 Drawer Side Cabinet, Industrial Series 





Load Strength 






■■6" X 2" Casters for a Load Rating of 600 lb. per Cabinet 







1 Drawer 13.656 in 16.500 in 3.906 in 

1 Drawer 13.656 in 16.500 in 10.906 in 



2 


73


Industrial Series Parts 

Cat. No. UPC No. Description Used with Armstrong Product Product Weight 

16-001 781412160017 22" Ball Bearing Drawer Slides 16-790, 16-988, 16-888, 16-625 1.00 lb 

16-002 781412160024 16" Ball Bearing Drawer Slides 16-986, 16-984, 16-876, 16-874, 16-622, 16-626 0.75 lb 

16-005 781412160055 6" x 2" Swivel Casters 16-790, 16-988, 16-986, 16-984 1.50 lb 

16-006 781412160062 6" x 2" Stationary Casters 16-790, 16-988, 16-986, 16-984 1.50 lb 

16-091 781412160918 Large Side Handle 16-790, 16-988 1.00 lb 

16-092 781412160925 Small Side Handle 16-986, 16-984 1.00 lb 

16-093 781412160932 Lock and Key Set 

16-790, 16-988, 16-986, 16-984, 16-888, 16-876, 16-874, 16-622, 

16-625, 16-626 

0.20 lb 

■■Professional Series is Designed for Heavy Industrial Use / Heavy 

Capacity 

■■Full Extension 75 lb Rated Ball Bearing Slides 

■■Rugged Sidewall Design Reinforced with Internal Channels for 

Extra Rigidity 

■■Positive Latch System Assures Drawers Latch Securely 

■■Includes Drawer Liners 

■■Smooth Operating Gas Struts on Top Chest 

52" 8 Drawer Chest, Professional Series 












74



Capacity 

■■6" X 2" Casters for a Load Rating of Over 3,200 lb per Cabinet 


■■Double Slides on Select Drawers 





52" 11 Drawer Roller Cabinet, Professional Series 












Capacity 





■■Includes Drawer Liners 

■■Smooth Operating Gas Struts on Top Chest 

41" 8 Drawer Chest, Professional Series 











2 


75


■■Professional Series is Designed for Heavy Industrial Use / 

Heavy Capacity 

■■6" X 2" Casters for a Load Rating of Over 3,200 lb per Cabinet 







41" 11 Drawer Roller Cabinet, Professional Series 












■■Standard Series is Designed for Regular Industrial Use / 

Standard Capacity 


■■Rugged Internal Sidewall for Strength and Durability 

■■Lid Supports on Top Chest 

41" 8 Drawer Chest, Standard Series 


16-820 781412168204 Red 8,015 cubic in. 40.500 in 16.000 in 20.000 in No Ball Bearing - 50 lb Yes 138.00 lb 








76




■■5" x 2" Casters for Load Ratings of Over 1,100 lb per Cabinet 




■■Includes MDF Top on Roller Cabinet 

41" 11 Drawer Roller Cabinet, Standard Series 

















2 





1 Drawer 26.000 in 10.700 in 2.900 in 




77







26" 2 Drawer Intermediate Chest, Standard Series 

Cat. No. UPC No. Color Storage Volume Width Depth Height Drawer Liners Drawer Slides Handled Product Weight 

16-609 781412166095 Red 1,888 cubic in. 26.000 in 16.000 in 19.700 in No Ball Bearing - 50 lb No 72.00 lb 














1 Drawer 22.300 in 16.400 in 4.100 in 



78





















2 

Cat. No. UPC No. Color Storage Volume Width Depth Height Load Weight Drawer Slides Drawer Liners Product Weight 

16-926 781412169263 Red 8,521 cubic in. 26.500 in 18.000 in 34.500 in 1100 lb Ball Bearing - 50 lb No 109.00 lb 


1 Drawer 22.300 in 16.400 in 5.100 in 




79


■■Designed for Industrial Use 

■■High Impact Plastic Portable Chest with Steel Drawers 

■■Full Extension 25 lb Rated Friction Slides 

■■Comfortable Handle Tucks into the Lid Providing a Flush Surface 

23" 3 Drawer Plastic Portable Chest 


16-603 781412166033 Black 23.000 in 10.500 in 13.500 in 1,788 cubic in. 15.00 lb 




■■Dual Latch with Lock Clasps 


20" Steel Hand Box 




16" Steel Hand Box 

■■Keyed Center Lock for Security 



16-607 781412166071 Black 16.000 in 7.000 in 7.500 in 822 cubic in. 5.50 lb 

80


16" Plastic Hand Box 

■■Molded From Heavy-Duty Polypropylene 

■■Will Not Dent or Rust 

■■Three Levels of Storage 

■■Organizes Hand Tools and Supplies 

■■V Groove in Lid That Holds Pipe, Dowels, and Similar Items 

in Place for Sawing 





Middle Tray 16.000 in 7.375 in 3.00 in 

Bottom Tray 16.000 in 7.375 in 7.00 in 


■■Heavy Duty Plastic 

■■Clips Sold in Standard Package of 15 Pieces Only 

Plastic Socket Rails and Clips 

2 

Cat. No. UPC No. Packaging Description Drive Size Color Length Product Weight Shelf Pack Qty. 

16-836 781412168365 Bagged 10" Socket Rail Red Plastic - Red 10.000 in 0.08 lb 1 

16-837 781412168372 Bagged 10" Socket Rail Blue Plastic - Blue 10.000 in 0.08 lb 1 

16-838 781412168389 Bagged 15" Socket Rail Red Plastic - Red 15.000 in 0.12 lb 1 

16-839 781412168396 Bagged 15" Socket Rail Blue Plastic - Blue 15.000 in 0.12 lb 1 

16-844 781412168440 Bagged 1/4" Drive Socket Clip 1/4 in Black - 0.05 lb 15 




81



■■Heavy Gauge Steel and Bright Plated 

■■Clips Sold in Standard Package of 10 Pieces Only 

Metal Socket Rails and Clips 

Cat. No. UPC No. Packaging Description Drive Size Color Length Product Weight Shelf Pack Qty. 

16-831 781412168310 Bagged 9" Socket Rail Steel - Chrome 9.000 in 0.12 lb 5 




16-841 781412168419 Bagged 1/4" Drive Socket Clips Steel 1/4 in Chrome 0.500 in 0.14 lb 10 




Tool Rolls 

■■Durable Vinyl Roll Pouch Used with Armstrong Sets 

■■For Wrench, Punch/Chisel and Screwdriver/Nutdriver Sets 


Cat. No. UPC No. Height Width Number of Pockets Used On Used with Armstrong Product Product Weight 

29-402 781412294026 14.000 in 29.000 in 19 Punch and Chisel Sets 70-567 0.42 lb 



29-405 781412294057 11.250 in 17.750 in 10 Punch and Chisel Sets 70-552, 70-563 0.21 lb 

29-407 781412294071 12.000 in 7.260 in 5 Punch and Chisel Sets 

70-556, 70-559, 70-560, 

70-564 

29-410 781412294101 17.000 in 11.000 in 4 Screw Drivers and Nut Driver Sets 66-610, 66-618, 66-639 0.10 lb 

29-411 781412294118 13.000 in 15.000 in 5 Screw Drivers and Nut Driver Sets 66-611, 66-615 0.22 lb 

29-412 781412294125 20.000 in 15.000 in 6 Screw Drivers and Nut Driver Sets 

66-606, 66-608, 66-611, 

66-619, 66-640 

29-413 781412294132 13.250 in 20.500 in 7 Screw Drivers and Nut Driver Sets 66-614 0.30 lb 

29-414 781412294149 20.000 in 16.500 in 7 Screw Drivers and Nut Driver Sets 66-626 0.38 lb 

29-415 781412294156 17.000 in 25.250 in 8 Screw Drivers and Nut Driver Sets 

29-416 781412294163 13.000 in 8.250 in 4 Wrench Sets 

66-604, 66-611, 66-612, 

66-620 

25-692, 27-768, 26-730, 

26-700 

29-418 781412294187 8.500 in 7.000 in 5 Wrench Sets 27-939, 70-970 0.08 lb 

0.10 lb 

1.00 lb 

0.44 lb 

0.13 lb 

82


Cat. No. UPC No. Height Width Number of Pockets Used On Used with Armstrong Product Product Weight 


27-635, 53-841, 29-273, 

30-973, 53-700, 26-730, 

28-155, 55-387 

29-421 781412294217 17.500 in 9.375 in 5 Wrench Sets 26-849 0.19 lb 



29-426 781412294262 10.500 in 18.500 in 7 

Wrench Sets, Screw Drivers, and 

Nut Driver Sets 

0.18 lb 

66-843, 28-386 0.23 lb 


29-430 781412294309 8.000 in 11.750 in 7 Wrench Sets 25-609, 25-605, 30-609 0.12 lb 


25-671, 25-631, 25-677, 

30-631, 25-694, 27-609, 

27-708, 53-843 












25-637, 25-680, 25-626, 

52-671, 52-631, 52-623, 

52-677, 27-708, 54-609, 

53-273 


29-456 781412294569 10.250 in 29.000 in 11 



0.25 lb 

0.38 lb 

66-845, 66-848 0.00 lb 







25-657, 25-642, 25-689, 

25-681, 30-644, 52-634, 

52-632, 52-684, 52-682, 

52-628 


29-472 781412294729 11.500 in 6.500 in 3 



0.50 lb 

28-153 0.09 lb 



2 


83



■■Store Tools in Classic Steel Case 

■■Handle on Top for Portability 

■■Dual Latched for Secure Closing and Locking 

Steel Cases and Tote Trays 


Cat. No. UPC No. Depth Width Height Handled Used with Armstrong Product Product Weight 

16-601 781412166019 3.500 in 6.500 in 1.250 in Yes 15-225, 15-230, 15-235, 44-210 0.86 lb 

16-604 781412166040 5.625 in 10.000 in 1.500 in Yes 15-210, 15-215, 15-220, 44-205 1.96 lb 

16-649 781412166491 4.000 in 11.000 in 1.500 in Yes 15-345, 15-350, 44-325 1.39 lb 

16-621 781412166217 5.750 in 14.000 in 3.000 in Yes 15-335, 44-320 4.05 lb 

16-691 781412166910 1.7500 in 14.250 in 3.500 in Yes - 0.97 lb 

16-606 781412166064 5.625 in 17.000 in 1.250 in Yes 15-200, 44-200 2.61 lb 

16-613 781412166132 5.250 in 17.000 in 3.000 in Yes 15-205, 15-320, 15-325, 15-330, 15-340, 44-310, 44-315 4.60 lb 

16-623 781412166231 3.250 in 17.500 in 2.125 in Yes 15-540, 44-525 2.59 lb 

16-695 781412166958 2.250 in 19.000 in 2.250 in Yes - 1.10 lb 

16-615 781412166156 5.625 in 21.500 in 3.125 in Yes 15-310, 44-300 6.21 lb 

16-653 781412166538 8.500 in 22.500 in 3.000 in Yes - 2.97 lb 

16-651 781412166514 8.625 in 22.750 in 8.375 in Yes - 15.21 lb 

16-629 781412166293 7.500 in 23.000 in 4.125 in Yes 

15-510, 15-515, 15-520, 15-525, 15-530, 15-535, 44-510, 44-515, 

44-520 

16-635 781412166354 7.500 in 23.000 in 4.125 in Yes - 7.76 lb 

16-657 781412166576 11.500 in 27.500 in 5.500 in Yes 15-700, 15-705, 44-700, 44-705 19.59 lb 

16-641 781412166415 8.000 in 31.250 in 5.000 in Yes 15-710, 15-715, 44-710, 15-810 18.52 lb 

16-659 781412166590 11.500 in 35.000 in 5.500 in Yes 15-800, 15-805 24.94 lb 

7.61 lb 

84

RATCHETS / SOCKETS / DRIVE TOOLS / SETS 

Multidrive Sets................................... 90 

1/4" Drive Sets.................................. 129 

1/4" Drive Open Stock....................... 144 

3/8" Drive Sets.................................. 196 


1/2" Drive Sets.................................. 300 


3/4" Drive Sets.................................. 386 


XL Pass-Thru Ratchet System.......... 413 

Multidrive Sets................................... 119 

1/4" Drive Sets.................................. 161 


3/8" Drive Sets.................................. 241 


1/2" Drive Sets.................................. 328 


3/4" Drive Sets.................................. 389 


1" Drive Sets...................................... 406 

1" Drive Open Stock.......................... 408 

1-1/2" Drive Open Stock................... 412 

3 


Mechanic’s Tool Sets....................125, 404 

85


Ratchets, Sockets, 

Drive Tools 

GearWrench ® has been the leader in ratchet innovation since its introduction. What started with the patented “NGR” (Next 

Generation Ratchet) has evolved into the 120XP – the new 120 position ratchet that has quickly become the industry leader 

in performance, providing speed, strength and access. 

GearWrench ® offers a complete line of ratchets, sockets, and drive tools available individually or in sets. All are made of only the 

finest materials for a long productive life. 

Teardrop low profile head and 

flush mounted on/off switch allow 

better access in tight spaces 

FULL POLISH 

RATCHETS 

COMPETITION GEARWRENCH 

Lower profile head provides better access 

Enclosed head design for extreme 

resistance to dirt infiltration 

Full Polish, 

Balanced Handle 

RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 

Head Rotates 180 

Degrees 

• Double-stacked pawls engage a 60-tooth gear providing 

exceptional strength, exceeding ASME specifications. 

• 120 positions, 3° ratcheting arc. 

• The gear is alternately engaged by the double-stacked 

pawls which give a 3° swing arc for faster work. 

CUSHION GRIP 

RATCHETS 

Flush Mounted Lever 

ROTO 

RATCHETS 

Fine Tooth 

72 Teeth 

Longer reach handle 

to access hard to 

reach fasteners 

Longer than most ratchets 

for added leverage 

Dual Material 

Cushion Grip 

Less Than 5 Degree Swing Arc 

for Greater Access 

86


SOCKETS 

AVAILABLE IN: 

• Standard 

• Deep 

• Spark Plug 

• Flex 

Entry angle 

guides fastener 

Serration depth 

as deep as the 

fastener 

Large hard-stamped 

identification 

Ordinary Ordinary Socket 

Socket 

Surface Surface Drive Drive® 

Technology 

® Technology ® Technology 

Double Line (SAE) & 

Knurled Line (MM) to 

easily identify Standard 

vs. Metric Sockets 

3 

MAGNETIC 

DRIVE TOOLS 

Knurled grip provides 

non-slip surface 

Magnetic tip keeps the 

fastener in the sockets 

Strong magnetic tips allow for 

contact through the base of the 

socket to hold nuts and bolts in 

place during use. 


87


Ratchets, Sockets, 

Drive Tools 

Armstrong ® Sockets & Drive Tools offer a wide variety of professional products for just about any application. All Armstrong Sockets 

& Drive Tools are manufactured to exacting standards with Aerospace, ASME, and Federal Spec callouts where applicable. They 

also incorporate professional quality features. Available in drive sizes ranging from 1⁄4" thru 1"; openings from 1/8" thru 3-1/2" and 

4mm thru 60mm; and point configurations in 4Pt, 6Pt, 8Pt, and 12 Pt. Armstrong even has a 1-1/2" ratchet that can be used with 

1-1/2" impact sockets in the most extreme industrial environment of large fasteners. 

Few industries demand quality to the degree required by the aerospace industry. Armstrong now has dedicated aerospace products 

for this industry as well as any user requiring the highest in quality and reliability. Look for the “AS” symbol stamped on the product. 

All tools are manufactured from high alloy steel using the most up-to-date manufacturing processes (including cold forming on many 

sizes) and heat treat to optimize strength and durability. Available individually or in a selection of sets, these precision-made sockets 

and accessories can handle just about any fastening application. 

Low profile head 

design permits 

use in confined areas 

Recessed reversing 

lever has On/Off markings 

New design combines strength of a tear drop 

with a tight ratcheting arc: 1/4" Dr. 4° 88 tooth 

3/8" Dr. 4° 88 tooth 

1/2" Dr. 6° 60 tooth 

FULL POLISH 

RATCHETS 

Improved modified hour-glass handle 

conforms to the shape of the hand for 

maximum comfort and minimal fatigue 

RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 

Unique enclosed head 

(no screws) with two 

O-rings resists contaminants 

for extreme 

strength and long life 

Seal locks out 

contaminants 

Maximum contact 

with ratchet wheel 

Torque Wrap design reduces stress on the gear and pawl teeth by 

transferring loads to the ratchet head for greater strength and durability 

SOCKETS 

Cold Form Ball Recess 

• Replaces 4 sided detents 

• More consistent depth 

and location 

• Consistent secure retention 

• No lost sockets 

Radius corner design 

provides 15%-20% more 

torque, extends fastener 

life and reduces slippage. 

Manufactured to industrial 

specifications assuring a thin 

wall design with precise nut 

end dimensions. 

Laser etched markings optimize 

size identification, and provide 

SAE / Metric differentiation, even 

in low light conditions. 

Specifically heat treated 

for the correct balance of 

strength and durability. 

9-position locking flex head 

maximizes safety and maintains 

position regardless of load 

88


ACCESSORIES 

Broached hex with 

set screw allows 

higher torque 

loads; convenient 

replacement 

Full length 

hex provides 

longer life 

Patented modified ear design 

prevents lock-up at extreme 

angles, allowing for smooth, 

continuous operation. 

Laser etched markings optimize 


SAE / Metric differentiation, even 

in low light conditions. 

SOCKET 

SETS 

New packaging is available in 

1/4", 3/8", and 1/2" drive sets 

in both SAE and Metric 

When possible, sockets lay 

down to show Armstrong 

identification 

Socket sizes are also laser cut 

into the foam for additional 

size identification 

Roller Cabinet/Tool Box Storage 

& Tool Control 

• Foam insert can be removed and 

placed in any tool box drawer 

• Lid can be removed and blow 

mold base and foam insert placed 

in any tool box drawer 

Durable, long lasting blow 

mold case with secure latches 

Foam inserts in the case hold sockets, 

ratchets, and accessories securely 

Foam color is black with a blue 

underlayment for easy identification 

when a tool is missing 

3 


89


■■Includes 3-Drawer Storage Box 

■■Full Polish Chrome Sockets With Large Hard Stamp 

Size Markings 

■■Full Polish Chrome Combination Wrenches Feature Offset Box 

End and Surface Drive® Technology To Reduce 

Fastener Rounding 

■■45 Tooth Full Polish Chrome Quick-Release Ratchets 

■■The Original ALLEN® Brand Hex Keys 

■■Knurled Full Polish Chrome Extensions 

■■Magnetic Bit Driver With Ergonomic Dual Material Handle 

■■Sockets Feature Surface Drive® Technology To Reduce 


■■Meets or Exceeds ASME B107.1, B107.5M, B107.10, B107.6 

239 Pc. 1/4", 3/8", and 1/2" Drive 6 and 12 Point 

SAE/Metric Mechanics Tool Set 


3 MULTIDRIVE 


80934 099575809347 Boxed 43.00 lb 1 

Catalog No. Description 


81014 1/4" Drive Teardrop Quick Release Ratchet 




81309 1/2" Drive Quick Release Tear Drop Ratchet 


82783 Magnetic Bit Holding Screwdriver 1/4" 




































90




































































































MULTIDRIVE 3 


91



3 MULTIDRIVE 




























































- #1 Phillips Bit 



- 4mm Slotted Bit 



- T-40 Torx® Bit 



- 3/16" Nutdriver Bit 







- 5mm Nutdriver Bit 







92


■■Includes Storage Case 


Size Markings 














80933 099575809330 Boxed 15.00 lb 1 















80480 1/4" Bit Adapter 1/4" Drive 












































MULTIDRIVE 3 


93



3 MULTIDRIVE 



































































































94
















































MULTIDRIVE 3 


95




Size Markings 













3 MULTIDRIVE 


80932 099575809323 Boxed 23.54 lb 1 

























































96




































































































MULTIDRIVE 3 


97



3 MULTIDRIVE 
















































98




Size Markings 














80931 099575809316 Boxed 20.33 lb 1 













81799 3/8" x7/16" Full Polish Open End Wrench 


81801 1/2"x 9/16" Full Polish Open End Wrench 


81794D 10x12mm Full Polish Open End Wrench 


81796 12x14mm Full Polish Open End Wrench 






































MULTIDRIVE 3 


99



3 MULTIDRIVE 
















































































100




Size Markings 

■■84 Tooth Full Polish Chrome Thin Profile Ratchets 


■■Magnetic 1/4 Bit Driver With Ergonomic Dual Material Handle 







83001D 099575830013 Boxed 18.72 lb 1 







80471 Insert Bit T-10 Tamper Proof Torx® Bit 






80180 1/4" Drive TORX® Tamper-Proof Bit Socket, T-10 





81119 1/4" Drive Wobble Extension 2" 











































MULTIDRIVE 3 


101



3 MULTIDRIVE 































































102




Size Markings 

■■Full Polish Chrome Double Open End Wrenches Surface Drive® 

Technology To Reduce Fastener Rounding 



■■Knurled Full Polish Chrome Extension 





88 Pc. 1/4" and 3/8" Drive 6 and 12 Point SAE/ 

Metric Mechanics Tool Set 


80930 099575809309 Boxed 8.91 lb 1 

Cat. No. Description Cat. No. Description 

81218 3/8" Drive Teardrop Quick Release Ratchet 80135D 1/4" Drive 6 Point Standard Metric Socket 13mm 

56603G 13 Piece Long Arm SAE Hex Key Set 80136 1/4" Drive 6 Point Standard Metric Socket 14mm 

81128 1/4" Socket Driver 80496 3/8" Drive 12 Point Standard SAE Socket 1/4" 

80480 1/4" Bit Adapter 1/4" Drive 80497D 3/8" Drive 12 Point Standard SAE Socket 5/16" 

81277 3/8" Drive 3/8" F x 1/4" M Adapter 80498 3/8" Drive 12 Point Standard SAE Socket 3/8" 

81799 3/8" x7/16" Full Polish Open End Wrench 80499 3/8" Drive 12 Point Standard SAE Socket 7/16" 

81801 1/2"x 9/16" Full Polish Open End Wrench 80500D 3/8" Drive 12 Point Standard SAE Socket 1/2" 

81794D 10x12mm Full Polish Open End Wrench 80501 3/8" Drive 12 Point Standard SAE Socket 9/16" 

81796 12x14mm Full Polish Open End Wrench 80502 3/8" Drive 12 Point Standard SAE Socket 5/8" 

81241 3/8" Drive Standard Extension 3" 80503 3/8" Drive 12 Point Standard SAE Socket 11/16" 

80104D 1/4" Drive 6 Point Standard SAE Socket 5/32" 80504 3/8" Drive 12 Point Standard SAE Socket 3/4" 

80105 1/4" Drive 6 Point Standard SAE Socket 3/16" 80505 3/8" Drive 12 Point Standard SAE Socket 13/16" 

80106 1/4" Drive 6 Point Standard SAE Socket 7/32" 80506D 3/8" Drive 12 Point Standard SAE Socket 7/8" 

80107 1/4" Drive 6 Point Standard SAE Socket 1/4" 80485 3/8" Drive 12 Point Standard Metric Socket 9mm 






80113D 1/4" Drive 6 Point Standard SAE Socket 1/2" 80491 3/8" Drive 12 Point Standard Metric Socket 15mm 


80125 1/4" Drive 6 Point Standard Metric Socket 4mm 80493 3/8" Drive 12 Point Standard Metric Socket 17mm 


80127 1/4" Drive 6 Point Standard Metric Socket 5.5mm 80495 3/8" Drive 12 Point Standard Metric Socket 19mm 

80128 1/4" Drive 6 Point Standard Metric Socket 6mm 80402 3/8" Drive Spark Plug Socket 5/8" 

80129 1/4" Drive 6 Point Standard Metric Socket 7mm - #1 Phillips Bit 

80130 1/4" Drive 6 Point Standard Metric Socket 8mm - #2 Phillips Bit 

80131D 1/4" Drive 6 Point Standard Metric Socket 9mm - #3 Phillips Bit 

80132 1/4" Drive 6 Point Standard Metric Socket 10mm - 4mm Slotted Bit 

80133 1/4" Drive 6 Point Standard Metric Socket 11mm - 5mm Slotted Bit 

80134 1/4" Drive 6 Point Standard Metric Socket 12mm - 6mm Nutdriver Bit 

MULTIDRIVE 3 


103




Size Markings 



■■Meets or Exceeds ASME B107.1, B107.5M, B107.10 




83000 099575830006 Boxed 9.90 lb 1 


3 MULTIDRIVE 


81011F 1/4" Drive Full Polish Teardrop Ratchet 80198 1/4" Drive 12 Point Standard Socket 5mm 

81211F 3/8" Drive Full Polish Teardrop Ratchet 80200 1/4" Drive 12 Point Standard Socket 6mm 

81101 1/4" Drive Standard Extension 2" 80201 1/4" Drive 12 Point Standard Socket 7mm 




80115 1/4" Drive 6 Point Deep SAE Socket 3/16" 80205 1/4" Drive 12 Point Standard Socket 11mm 

80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 80206 1/4" Drive 12 Point Standard Socket 12mm 

80117 1/4" Drive 6 Point Deep SAE Socket 1/4" 80365 3/8" Drive 6 Point Deep SAE Socket 3/8" 



80120D 1/4" Drive 6 Point Deep SAE Socket 11/32" 80368 3/8" Drive 6 Point Deep SAE Socket 9/16" 


80122D 1/4" Drive 6 Point Deep SAE Socket 7/16" 80370D 3/8" Drive 6 Point Deep SAE Socket 11/16" 


80141 1/4" Drive 6 Point Deep Metric Socket 6mm 80372 3/8" Drive 6 Point Deep SAE Socket 13/16" 

80142 1/4" Drive 6 Point Deep Metric Socket 7mm 80498 3/8" Drive 12 Point Standard SAE Socket 3/8" 


80144 1/4" Drive 6 Point Deep Metric Socket 9mm 80500D 3/8" Drive 12 Point Standard SAE Socket 1/2" 


80146D 1/4" Drive 6 Point Deep Metric Socket 11mm 80502 3/8" Drive 12 Point Standard SAE Socket 5/8" 













80197 1/4" Drive 12 Point Standard Socket 4mm 80493 3/8" Drive 12 Point Standard Metric Socket 17mm 

104




Size Markings 

■■45 Tooth Full Polish Chrome Quick-Release Ratchet 


■■Sockets Feature Surface Drive® Technology To Reduce Fastener 

Rounding 





80929 099575809293 Boxed 3.70 lb 1 


81218 3/8" Drive Teardrop Quick Release Ratchet 80131D 1/4" Drive 6 Point Standard Metric Socket 9mm 

81277 3/8" Drive 3/8" F x 1/4" M Adapter 80132 1/4" Drive 6 Point Standard Metric Socket 10mm 



















MULTIDRIVE 3 


105


■■84 Tooth Gear gives a 4.3° swing arc for easy access 

■■Flush Mounted On-Off Lever 

■■Teardrop Shaped Head 

■■Full Polish Chrome Handle 

■■Bright Chrome Finish 

■■Meets or Exceeds ASME B107.10 

4 Pc. 1/4", 3/8", and 1/2" Drive Full Polish Flex 

Handle Ratchet Set 

Cat. No. UPC No. Packaging Tooth Count Product Weight Shelf Pack Qty. 

81230F 099575800023 Tray 84 3.121 lb 1 


81012F 1/4" Drive Full Polish Flex Head Ratchet 81215F 3/8" Drive Full Polish Flex Head Ratchet 

81212F 3/8" Drive Stubby Flex Head Ratchet - Full Polish 81306F 1/2" Drive Full Polish Flex Head Ratchet 


3 MULTIDRIVE 







2 Pc. 1/4" and 3/8" Drive Full Polish Flex Handle 

Ratchet Set 


81216F 099575861116 Tray 84 2.184 lb 1 


81012F 1/4" Drive Full Polish Flex Head Ratchet 81215F 3/8" Drive Full Polish Flex Head Ratchet 







3 Pc. 1/4", 3/8", and 1/2" Drive Full Polish 

Teardrop Ratchet Set 


81206F 099575811067 Tray 84 2.646 lb 1 


81011F 1/4" Drive Full Polish Teardrop Ratchet 81304F 1/2" Drive Full Polish Teardrop Ratchet 


106


■■120 Positions, 3° Ratcheting Arc 

■■The Gear is Alternately Engaged by the Double-Stacked Pawls 

which give a 3° Swing Arc for Faster Work 

■■Highly Visible On/Off Markings on the Head 

■■Enclosed Head Design for Extreme Resistance to Dirt Infiltration 

■■Double-Stacked Pawls Engage a 60-tooth Gear Providing 

Exceptional Strength, Exceeding ASME Specifications 

■■Teardrop Low Profile Head and Flush Mounted On/Off Switch 

Allow Better Access in Tight Spaces 

■■Longer Reach Handle to Access Hard to Reach Fasteners 



3 Pc. 1/4", 3/8" and 1/2" Drive 

120XP Full Polish Ratchet Set 

Cat. No. UPC No. Packaging No. of Positions Product Weight Shelf Pack Qty. 

81206P 099575816024 EVA Foam Tray 120 3.20 lb 1 


81011P 1/4" Drive 120XP Full Polish Teardrop Ratchet 81304P 1/2" Drive 120XP Full Polish Teardrop Ratchet 

81211P 

3/8" Drive 120XP Full Polish Teardrop Ratchet 

■■Quick-Release Drive Tool Retention 





3 Pc. 1/4", 3/8", and 1/2" Drive Quick-Release 



81310 099575813108 Carded 45 2.73 lb 1 


81014 1/4" Drive Teardrop Quick Release Ratchet 81309 1/2" Drive Quick Release Tear Drop Ratchet 


MULTIDRIVE 3 


107


■■84 Tooth Gear gives a 4.3° Swing Arc for Easy Access 



■■Dual Material Cushion Grip Handle 



3 Pc. 1/4", 3/8", and 1/2" Drive Cushion Grip 



81207F 099575820700 Carded 84 2.87 lb 1 


81007F 1/4" Drive Ratchet w/Cushion Grip 81303F 1/2" Drive Ratchet w/Cushion Grip 

81208F 3/8" Drive Ratchet w/Cushion Grip 


3 MULTIDRIVE 







3 Pc. 1/4" and 3/8" Drive Cushion Grip Mixed 

Teardrop Set 


81203F 099575811036 Carded 84 2.22 lb 1 


81007F 1/4" Drive Ratchet w/Cushion Grip 81210F 3/8" Drive Flex Ratchet w/Cushion Grip 

81208F 3/8" Drive Ratchet w/Cushion Grip 







2 Pc. 1/4" and 3/8" Drive Cushion Grip Flex 

Teardrop Set 


81204F 099575811043 Carded 84 1.763 lb 1 


81009F 1/4" Drive Flex Ratchet w/Cushion Grip 81210F 3/8" Drive Flex Ratchet w/Cushion Grip 

108


■■72 tooth gear gives a 5° swing arc for easy access 

■■Head rotates 180° 

■■Dual material cushion grip for comfort 

■■Bright chrome finish 

■■Meets or Exceeds ASME B107.10M 

2 Pc. 1/4" and 3/8" Drive Cushion Grip Roto 

Ratchet Set 


81223 099575812231 Carded 72 1.26 lb 1 


81224 1/4" Drive Roto Ratchet - Cushion Grip 81225 3/8" Drive Roto ratchet - Cushion Grip 

■■72 Tooth Gear for 5 Degree Ratchet Angle 

■■Reversing Lever 

■■Contoured Handle for Maximum Grip Force 

2 Pc. 1/4" and 3/8" Drive Thumbwheel 

Ratchet Set 


81222 099575812224 Carded 72 0.40 lb 1 


81008 1/4" Drive Thumbwheel Ratchet 81226 3/8" Drive Thumbwheel Ratchet 

■■Includes Universal Joints, Impact Universal Joints, and Adapters 

10 Pc. 1/4", 3/8", and 1/2" Drive Universal 

Adapter Set 


81205 099575812057 Blow Mold Case 2.09 lb 1 


80100 1/4" Drive Universal Joint 81127 1/4" Drive 1/4" F x 3/8" M Adapter 

80549 3/8" Drive Universal Joint 81277 3/8" Drive 3/8" F x 1/4" M Adapter 

80101 1/4" Drive Impact Universal Joint 81278 3/8" Drive 3/8" F x 1/2" M Adapter 



MULTIDRIVE 3 


109


■■Full Polish Chrome Finish 

■■Includes Socket Clip 

4 Pc. 1/4", 3/8", and 1/2" Drive Adapter Set on 

Socket Rail 


81217 099575812170 Carded 0.32 lb 1 


81127 1/4" Drive 1/4" F x 3/8" M Adapter 81278 3/8" Drive 3/8" F x 1/2" M Adapter 

81277 3/8" Drive 3/8" F x 1/4" M Adapter 81354 1/2" Drive 1/2" F x 3/8" M Adapter 


3 MULTIDRIVE 


■■Magnetic Tips Keep the Fastener in the Socket 

■■Magnetic Tip Keeps the Fastener in the Sockets 


9 Pc. 1/4", 3/8", and 1/2" Drive Magnetic Drive 

Tool Set 


81235 099575812354 Carded 2.00 lb 1 


81258 1/4" Drive 1/4" F x 3/8" M Adapter, Magnetic 81263 1/2" Drive Magnetic Extension 6" 

81259 3/8" Drive 3/8" F x 1/4" M Adapter, Magnetic 81255 1/4" Drive Magnetic Universal Joint 

81260 3/8" Drive 3/8" F x 1/2" M Adapter, Magnetic 81256 3/8" Drive Magnetic Universal Joint 

81261 1/4" Drive Magnetic Extension 6" 81257 1/2" Drive Magnetic Universal Joint 

81262 3/8" Drive Magnetic Extension 6" 

3 Pc. 1/4", 3/8", and 1/2" Drive Magnetic 

Universal Joint Set 


81236D 099575812361 Carded 0.64 lb 1 


81255 1/4" Drive Magnetic Universal Joint 81257 1/2" Drive Magnetic Universal Joint 

81256 3/8" Drive Magnetic Universal Joint 

110


■■Magnetic Tip Keeps the Fastener in the Socket 



Adapter Set 


81237 099575812378 Carded 0.29 lb 1 


81258 1/4" Drive 1/4" F x 3/8" M Adapter, Magnetic 81260 3/8" Drive 3/8" F x 1/2" M Adapter, Magnetic 

81259 3/8" Drive 3/8" F x 1/4" M Adapter, Magnetic 

■■Knurled Grip Provides Non-Slip Surface 


■■Magnetic Tip Keeps the Fastener in the Socket 


Extension Bar Set 


81238 099575812385 Carded 1.14 lb 1 


81261 1/4" Drive Magnetic Extension 6" 81263 1/2" Drive Magnetic Extension 6" 

81262 3/8" Drive Magnetic Extension 6" 

MULTIDRIVE 3 


111


■■Heat Treated Socket Bases for Durability and Serviceability 

■■Professional, Full Polish Chrome 

■■Meets or Exceeds ASME B107.1, B107.5M 

36 Pc. 1/4", 3/8", and 1/2" Drive SAE/Metric Hex 

and Torx® Bit Socket Set 




3 MULTIDRIVE 


80172 1/4" Drive TORX® Press Fit Bit Socket, T-10 80463 3/8" Drive External TORX® Socket, E-16 

80173 1/4" Drive TORX® Press Fit Bit Socket, T-15 80416 3/8" Drive Hex Bit Socket, 5/32" 



80176D 1/4" Drive TORX® Press Fit Bit Socket, T-27 80419 3/8" Drive Hex Bit Socket, 1/4" 

80177D 1/4" Drive TORX® Press Fit Bit Socket, T-30 80420 3/8" Drive Hex Bit Socket, 5/16" 

80187 1/4" Drive External TORX® Sockets, E-5 80421 3/8" Drive Hex Bit Socket, 3/8" 

80188D 1/4" Drive External TORX® Sockets, E-6 80422 3/8" Drive Hex Bit Socket, 2mm 

80189 1/4" Drive External TORX® Sockets, E-7 80423 3/8" Drive Hex Bit Socket, 2.5mm 

80190 1/4" Drive External TORX® Sockets, E-8 80424 3/8" Drive Hex Bit Socket, 3mm 

80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 80425 3/8" Drive Hex Bit Socket, 4mm 



80454 3/8" Drive TORX® Press-Fit Bit Socket, T-50 80428D 3/8" Drive Hex Bit Socket, 7mm 


80460 3/8" Drive External TORX® Socket, E-10 80430 3/8" Drive Hex Bit Socket, 9mm 

80461 3/8" Drive External TORX® Socket, E-12 80431 3/8" Drive Hex Bit Socket, 10mm 

80462 3/8" Drive External TORX® Socket, E-14 80669D 1/2" Drive External Torx® Socket, E-18 

112




36 Pc. 1/4", 3/8", and 1/2" Drive Torx® Bit 

Socket Set 




80171 1/4" Drive TORX® Press Fit Bit Socket, T-8 80189 1/4" Drive External TORX® Sockets, E-7 

80172 1/4" Drive TORX® Press Fit Bit Socket, T-10 80190 1/4" Drive External TORX® Sockets, E-8 

80173 1/4" Drive TORX® Press Fit Bit Socket, T-15 80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 



80176D 1/4" Drive TORX® Press Fit Bit Socket, T-27 80454 3/8" Drive TORX® Press-Fit Bit Socket, T-50 


80178 1/4" Drive TORX® Tamper-Proof Bit Socket, T-7 80456D 3/8" Drive TORX® Tamper-Proof Bit Socket, T-40 

80179 1/4" Drive TORX® Tamper-Proof Bit Socket, T-8 80457 3/8" Drive TORX® Tamper-Proof Bit Socket, T-45 



80182 1/4" Drive TORX® Tamper-Proof Bit Socket, T-20 80460 3/8" Drive External TORX® Socket, E-10 




80186 1/4" Drive External TORX® Sockets, E-4 80669D 1/2" Drive External Torx® Socket, E-18 

80187 1/4" Drive External TORX® Sockets, E-5 80670 1/2" Drive External Torx® Socket, E-20 

80188D 1/4" Drive External TORX® Sockets, E-6 80667 1/2" Drive TORX® Press Fit Bit Socket, T-60 

MULTIDRIVE 3 


113




■■Includes Socket Rail 

13 Pc. 1/4", 3/8", and 1/2" Drive Torx® Bit 

Socket Set 


80723 099575807237 Carded 1.32 lb 1 







80176D 1/4" Drive TORX® Press Fit Bit Socket, T-27 80667 1/2" Drive TORX® Press Fit Bit Socket, T-60 



3 MULTIDRIVE 




13 Pc. 1/4", 3/8", and 1/2" Drive Torx® Tamper 

Proof Bit Socket Set 


80725 099575807251 Carded 1.38 lb 1 



80179 1/4" Drive TORX® Tamper-Proof Bit Socket, T-8 80456D 3/8" Drive TORX® Tamper-Proof Bit Socket, T-40 




80183 1/4" Drive TORX® Tamper-Proof Bit Socket, T-25 80668 1/2" Drive TORX® Tamper-Proof Bit Sockets, T-60 


114




13 Pc. 1/4", 3/8", and 1/2" Drive External Torx® 

Socket Set 


80583 099575805837 Carded 2.08 lb 1 


80186 1/4" Drive External TORX® Sockets, E-4 80462 3/8" Drive External TORX® Socket, E-14 


80188D 1/4" Drive External TORX® Sockets, E-6 80669D 1/2" Drive External Torx® Socket, E-18 

80189 1/4" Drive External TORX® Sockets, E-7 80670 1/2" Drive External Torx® Socket, E-20 

80190 1/4" Drive External TORX® Sockets, E-8 80672 1/2" Drive External Torx Socket, E-22 

80460 3/8" Drive External TORX® Socket, E-10 80673 1/2" Drive External Torx Socket, E-24 





11 Pc. 3/8" Drive Torx® Tamper Proof Bit 

Socket Set 


80724 099575807244 Carded 0.37 lb 1 


80480 1/4" Bit Adapter 1/4" Drive 80475 Insert Bit T-27 Tamper Proof Torx® Bit 

80481 5/16" Bit Adapter 3/8" Drive 80476 Insert Bit T-30 Tamper Proof Torx® Bit 

80471 Insert Bit T-10 Tamper Proof Torx® Bit 80477 Insert Bit T-40 Tamper Proof Internal Torx® Bit 

80472 Insert Bit T-15 Tamper Proof Torx® Bit 80478 Insert Bit T-45 Tamper Proof Internal Torx® Bit 

80473 Insert Bit T-20 Tamper Proof Torx® Bit 80479D Insert Bit T-50 Tamper Proof Internal Torx® Bit 


MULTIDRIVE 3 


115





10 Pc. 1/4" and 3/8" Drive Torx® Bit Socket Set 


80722 099575807220 Carded 0.98 lb 1 


80172 1/4" Drive TORX® Press Fit Bit Socket, T-10 80177D 1/4" Drive TORX® Press Fit Bit Socket, T-30 






3 MULTIDRIVE 




■■All Bit Sockets 6" Long 

10 Pc. 1/4" and 3/8" Drive Long Torx® Bit 

Socket Set 


80588 099575805882 Carded 1.65 lb 1 


82510 1/4" Drive Long TORX® Bit Socket, T-8 82515 1/4" Drive Long TORX® Bit Socket, T-27 





116




10 Pc. 1/4", 3/8", and 1/2" Drive External Torx® 

Socket Set 


80582 099575805820 Carded 1.59 lb 1 




80188D 1/4" Drive External TORX® Sockets, E-6 80462 3/8" Drive External TORX® Socket, E-14 


80190 1/4" Drive External TORX® Sockets, E-8 80669D 1/2" Drive External Torx® Socket, E-18 





10 Pc. 3/8" and 1/2" Drive SAE Hex Bit Socket Set 


80579 099575805790 Carded 1.99 lb 1 


80414 3/8" Drive Hex Bit Socket, 1/8" 80420 3/8" Drive Hex Bit Socket, 5/16" 





MULTIDRIVE 3 


117






10 Pc. 3/8" and 1/2" Drive Metric Hex Bit 

Socket Set 


80578 099575805783 Carded 1.89 lb 1 


80425 3/8" Drive Hex Bit Socket, 4mm 80430 3/8" Drive Hex Bit Socket, 9mm 



80428D 3/8" Drive Hex Bit Socket, 7mm 80662 1/2" Drive Hex Bit Socket, 14mm 



3 MULTIDRIVE 





4 Pc. 3/8" and 1/2" Drive Metric Triple Square Bit 

Socket Set 


80572 099575805721 Carded 0.46 lb 1 


80449 3/8" Drive Triple Square Bit Socket, 6mm 80665 1/2" Drive Triple Square Bit Socket, 10mm 


118


■■All Tools are Made in the USA - Quality and Availability 

■■Hard Stamp Only, No EYE-D Markings 

107 Pc. 1/4" and 3/8" Drive 6 and 12 Point SAE/Metric 

Mechanics Tool Set 


15-524A 781412155242 Blow Mold Case 17.30 lb 1 


10-915A 1/4" Drive Roundhead Ratchet Knurled Handle 

11-915A 3/8" Drive Round Head Ratchet Knurled Handle 

10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 


10-922A 1/4" Drive Extension 3-1/2" No Knurling 

11-922A 3/8" Drive Extension 3" No Knurling 


10-005A 1/4" Drive 6 Point Standard Socket 5/32" 










10-206A 1/4" Drive 6 Point Deep Socket 3/16" 







37-004A 1/4" Drive 6 Point Standard Socket 4mm 











37-204A 1/4" Drive 6 Point Deep Socket 4mm 








11-112A 3/8 Drive 12 Point Standard Socket 3/8" 














MULTIDRIVE 

3 


119




































RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 MULTIDRIVE 

120






15-323A 781412153231 Blow Mold Case 6.45 lb 1 


11-967A 3/8" Drive Teardrop Quick Release Ratchet Knurled Handle 7-1/2" 37-010A 1/4" Drive 6 Point Standard Socket 10mm 

57010 5/64" Short Arm L Hex Key 37-011A 1/4" Drive 6 Point Standard Socket 11mm 

57012 3/32" Short Arm L Hex Key 37-012A 1/4" Drive 6 Point Standard Socket 12mm 

57014D 1/8" Short Arm L Hex Key 37-013A 1/4" Drive 6 Point Standard Socket 13mm 

57020D 5/32" Short Arm L Hex Key 11-112A 3/8 Drive 12 Point Standard Socket 3/8" 

57022 3/16" Short Arm L Hex Key 11-114A 3/8 Drive 12 Point Standard Socket 7/16" 

57024 7/32" Short Arm L Hex Key 11-116A 3/8 Drive 12 Point Standard Socket 1/2" 

57026D 1/4" Short Arm L Hex Key 11-118A 3/8 Drive 12 Point Standard Socket 9/16" 

10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 11-120A 3/8 Drive 12 Point Standard Socket 5/8" 

11-951 3/8" Drive Adapter 3/8" F x 1/4" M 11-122A 3/8 Drive 12 Point Standard Socket 11/16" 

10-919A 1/4" Drive Extension 1-1/2" 11-124A 3/8 Drive 12 Point Standard Socket 3/4" 

11-922A 3/8" Drive Extension 3" No Knurling 11-126A 3/8 Drive 12 Point Standard Socket 13/16" 

11-923A 3/8" Drive Extension 6" No Knurling 11-312A 3/8" Drive 12 Point Deep Socket 3/8" 

10-005A 1/4" Drive 6 Point Standard Socket 5/32" 11-314A 3/8" Drive 12 Point Deep Socket 7/16" 




10-009A 1/4" Drive 6 Point Standard Socket 9/32" 38-109A 3/8" Drive 12 Point Standard Socket 9mm 

10-010 1/4" Drive 6 Point Standard Socket 5/16" 38-110A 3/8" Drive 12 Point Standard Socket 10mm 

10-011 1/4" Drive 6 Point Standard Socket 11/32" 38-111A 3/8" Drive 12 Point Standard Socket 11mm 




37-004A 1/4" Drive 6 Point Standard Socket 4mm 38-115A 3/8" Drive 12 Point Standard Socket 15mm 




37-008A 1/4" Drive 6 Point Standard Socket 8mm 11-501 3/8" Drive Spark Plug Socket with Rubber Insert 5/8" 


MULTIDRIVE 

3 


121



■■Durable, long lasting blow molded case will not dent, will not 

rust, even under the harshest conditions -Two piece latches 

securely hold the box closed. 

■■Foam inserts securely hold all tools in place - Black Top Foam 

with Blue Foam underneath for easy identification of a missing 

tool 

■■The bottom half of the case with the foam insert or the foam 

insert itself can be removed and placed in a tool storage drawer 

for organization 

■■EYE-D markings on the sockets optimize size visibility, also 

providing SAE / metric differentiation - Socket sizes are also cut 

into the foam 

■■Ratchet has a compact head design, recessed reversing lever 

with On/Off markings, Unique "Hour Glass" handle design, as 

well as the "Torque Wrap" design incorporating a 10 degree 

ratcheting arc 

■■Meets or Exceeds ASME B107.1-2002, B107.10M and US Federal 

Spec. GGG-W-641E 

22 Pc. 1/4" and 3/8" Drive 6 and 12 Point SAE 



15-335 781412153354 Blow Mold Case 9.89 lb 1 



11-972 3/8" Drive Teardrop Ratchet Polished Handle 7-3/8" 10-012 1/4" Drive 6 Point Standard Socket 3/8" 

10-943 1/4" Drive Plastic Handle Driver 6" 11-014D 3/8" Drive 6 Point Standard Socket 7/16" 

11-951 3/8" Drive Adapter 3/8" F x 1/4" M 11-016D 3/8" Drive 6 Point Standard Socket 1/2" 

11-922 3/8" Drive Extension 3" 11-018D 3/8" Drive 6 Point Standard Socket 9/16" 


10-006D 1/4" Drive 6 Point Standard Socket 3/16" 11-022 3/8" Drive 6 Point Standard Socket 11/16" 


10-008D 1/4" Drive 6 Point Standard Socket 1/4" 11-026D 3/8" Drive 6 Point Standard Socket 13/16" 


10-010 1/4" Drive 6 Point Standard Socket 5/16" 11-030 3/8" Drive 6 Point Standard Socket 15/16" 

10-011 1/4" Drive 6 Point Standard Socket 11/32" 11-032D 3/8" Drive 6 Point Standard Socket 1" 

122



■■Bits are Manufactured to the Highest Tolerances and 

Specifications for Straightness, Concentricity, and Precise Tip Fit 

to the Fastener 

■■Bits are Manufactured From High Alloy Steel Using the Most 

Up-To-Date Manufacturing Process and Heat Treat to Prevent 

Shattering and Premature Bit Wear 

■■Bits are Retained in the Bit Holder By a Set Screw That Locks 

Securely Into a Groove on the Bit for Positive Bit Retention As 

Well As Simple, Easy Bit Replacement 

■■Broached Hex in the Bit Holder Allows Higher Torque Loads 

■■EYE-D Markings Optimize Size Visibility 


in Case 




11-708 3/8" Drive Standard Length Hex Driver Socket 1/8" Bit 11-714 3/8" Drive Standard Length Hex Driver Socket 5/16" Bit 





MULTIDRIVE 















15-435 781412154351 Boxed 2.80 lb 1 


16-831 9" Socket Rail Steel 11-713 3/8" Drive Standard Length Hex Driver Socket 1/4" Bit 

16-843 3/8" Drive Socket Clips Steel 11-714 3/8" Drive Standard Length Hex Driver Socket 5/16" Bit 






3 


123














10 Pc. 3/8" and 1/2" Drive Metric Hex Bit Socket Set 

in Case 





38-707 3/8" Drive Standard Length Hex Driver Socket 4mm Bit 38-714 3/8" Drive Standard Length Hex Driver Socket 9mm Bit 


38-711 3/8" Drive Standard Length Hex Driver Socket 6mm Bit 39-717 1/2" Drive Standard Length Hex Driver Socket 12mm 



124


■■Carefully selected assortment of Crescent® brand hand tools 

■■Set contains all the tools needed for most industrial applications, 

including 1/4", 3/8", and 1/2" quick-release ratcheting drives, with 

a wide selection of standard and deep sockets in the most common 

SAE and metric sizes 

■■All tools in this industrial-quality tool set meet stringent new 

ANSI and ASME specifications and come with a full satisfaction 

guarantee 

■■CTK170CMP same as CTK170MP but case is closed 


SAE/Metric Mechanics Tool Set (Open Case 

or Closed) 

Cat. No. UPC No. Product Weight Shelf Pack Qty. 

CTK170CMP 037103221377 20.20 lb 1 

CTK170MP 037103221360 36.25 lb 1 

Cat. No. Description Qty. Cat. No. Description Qty. 

- 1/4" Drive, 72-Tooth Quick-release Ratchet Drive 1 - 1/2" Drive, 5" Extension 1 

- 1/4" Drive, 3" Extension 1 - 

1/2" Drive, 6-Point Sockets: 1/2", 9/16", 5/8", 3/4", 7/8", 

15mm, 17mm, 18mm 19mm, 21mm 

10 

- 

1/4" Drive, 6-Point Sockets: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 

11/32", 3/8", 7/16", 1/2", 9/16", 4mm, 5mm, 5.5mm, 6mm, 7mm, 

8mm, 9mm, 10mm, 11mm, 12mm, 13mm 

22 - 

Combination Wrenches: 5/16", 3/8", 7/16", 1/2", 9/16", 

5/8", 8mm, 10mm, 12mm, 13mm, 14mm, 15mm 

- 3/8" Drive, 72-Tooth Quick-release Ratchet Drive 1 - Pliers: 8" Long Nose Cutting and 10" Tongue & Groove 2 

- 3/8" Drive, 3" Extension 1 - Wrench: 8" Adjustable 1 


Magnetic Screwdrivers: 1/4" x 4" Slotted, 3/16" x 3" 

Slotted, #2 x 4" Phillips®, #1 x 3" Phillips® 

4 

- 3/8" Drive, 3/8" (Female) to 1/4" (Male) Adapter 1 - Dura-Driver Magnetic Bit Driver 1 

- 3/8" Drive, Spark Plug Sockets: 5/8", 13/16" 2 - 

1" Driver Bits with Holders: Phillips®, Slotted, Torx®, and 

Hex 

44 

- 


9/16", 5/8", 11/16", 3/4", 7/8", 6mm, 7mm, 8mm, 9mm, 10mm, 25 - SAE Hex Keys with Holder 13 

12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm 

- 

3/8" Drive, 6-Point Deep Sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 

11/16", 3/4", 12mm, 13mm, 14mm, 16mm, 17mm 

10 - Metric Hex Keys with Holder 13 

- 1/2" Drive, 72-Tooth Quick-release Ratchet Drive 1 - Storage Case 1 

12 

MULTIDRIVE 

3 


125







■■All tools in this industrial-quality tool set meet stringent new 

ANSI and ASME specifications and come with a full satisfaction 

guarantee 




CTK148MP 037103200525 15.80 lb 2 



- 1/4" Drive, 72-Tooth Quick-release Ratchet Drive 1 - 1/2" Drive, 72-Tooth Quick-release Ratchet Drive 1 

- 1/4" Drive, 3" Extension 1 - 1/2" Drive, 5" Extension 1 

- 


11/32", 3/8", 7/16, 1/2", 9/16", 4mm, 5mm, 6mm, 7mm, 8mm, 

9mm, 10mm, 11mm, 12mm, 13mm 

16 - 


15mm, 17mm, 18mm, 19mm, 21mm 

- 3/8" Drive, 72-Tooth Quick-release Ratchet Drive 1 - 

Combination Wrenches: 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 

8mm, 10mm, 12mm, 13mm, 14mm, 15mm 

12 

- 3/8" Drive, 3" Extension 1 - Pliers: 8" Long Nose Cutting and 6" Diagonal Cutting 2 


Magnetic Screwdrivers: 1/4" x 4" Slotted, 3/16" x 3" Slotted, 

#2 x 4" Phillips®, #1 x 3" Phillips® 

4 

- 3/8" Drive, 3/8" (Female) to 1/4" (Male) Adapter 1 - Dura-Driver Magnetic Bit Driver 1 

- 3/8" Drive, Spark Plug Sockets: 5/8", 13/16" 2 - 1" Driver Bits with Holders: Phillips®, Slotted, Torx®, and Hex 44 

- 


11/16", 3/4", 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 16 - SAE Hex Keys with Holder 18 

19mm 

- 

3/8" Drive, 6-Point Deep Sockets: 7/16", 1/2", 9/16", 11/16", 3/4", 

12mm, 13mm, 14mm, 15mm, 17mm 

10 - Storage Case 1 

10 

126







■■All tools are industrial-quality, meeting stringent new ANSI and 

ASME specifications, and come with a full satisfaction guarantee 




CTK140CMP 037103255167 24.30 lb 1 


- 1/4" Drive Ratchet 1 - 

3/8" Drive 12-Point Metric Sockets: 9mm, 10mm, 11mm, 12mm, 

13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm 

11 

- 1/4" Drive 3" Extension Bar 1 - 

3/8" Drive 6-Point Deep SAE Sockets: 3/8", 7/16", 1/2", 9/16", 

5/8", 11/16", 3/4", 13/16", 7/8" 

9 


3/8” Drive 6-Point Deep Metric Sockets: 9mm, 10mm, 11mm, 

12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm 

11 

- 

1/4" Drive 6-Point SAE Sockets: 5/32", 3/16", 7/32", 1/4", 

9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 

11 - 3/8" Drive Torx Socket Bits: T-30, T-40, T-45 3 

- 

1/4" Drive 6-Point Metric Sockets: 4mm, 5mm, 5.5mm, 

6mm,7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm 

12 - 

3/8” Drive Screwdriver Socket Bits: 7/32" Slotted, 9/32" Slotted, 

3/8" Slotted, No. 1 Phillips, No. 2 Phillips, No. 3 Phillips, No. 4 

Phillips 

- 1/4" Drive Hex Socket Bits: 3/16", 7/32", 1/4", 5/16", 3/8" 5 - 1/2" Drive Ratchet 1 

- 1/4" Drive Torx® Socket Bits: T-15, T-20, T-25 3 - 1/2" Drive 3" Extension Bar 1 

- 

1/4" Drive Screwdriver Socket Bits: 7/32" Slotted, 1/4" Slotted, 

No. 1 Phillips®, No. 2 Phillips 

4 - 1/2" Drive 6" Extension Bar 1 

- 3/8" Drive Ratchet 1 - 

1/2" Drive 6-Point SAE Sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 

11/16", 3/4", 13/16", 7/8" 

9 

- 3/8" Drive 1-1/2" Extension Bar 1 - 

1/2" Drive 6-Point Metric Sockets: 9mm, 10mm, 11mm, 12mm, 

13mm, 14mm, 15mm, 16mm, 17mm, 18mm 

10 


Combination Wrenches, SAE: 1/4", 5/16", 11/32", 3/8", 7/16", 

1/2", 9/16", 5/8", 11/16", 3/4" 

10 


Combination Wrenches, Metric: 6mm, 7mm, 8mm, 9mm, 10mm, 

11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 14 

19mm 

- 

3/8" Drive 12-Point SAE Sockets: 5/16", 3/8", 7/16", 1/2", 

9/16", 5/8", 11/16", 3/4", 13/16", 7/8" 

10 - Durable Carrying Case 1 

7 

MULTIDRIVE 

3 


127



■■Set contains 1/4" and 3/8" quick-release ratcheting drives, 

32 SAE and metric sockets, 12 SAE and metric combination 

wrenches, plus 24 other tools, this is one of the most versatile 

tool selections ever assembled 

■■All tools are industrial-quality, meeting stringent new ANSI and 

ASME specifications, and come with a full satisfaction guarantee 




CTK70MP 037103211101 7.25 lb 1 



- 1/4" Drive, 72-Tooth Quick-release Ratchet Drive 1 - 3/8" (Female) to 1/4" (Male) Adapter 1 


Combination Wrenches: 3/8", 7/16", 1/2", 9/16", 5/8", 

11/16", 10mm, 12mm, 13mm, 14mm, 15mm, 17mm 

12 

- 


3/8", 7/16, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm 

16 - SAE Hex Keys with Holder 8 

- 3/8" Drive, 72-Tooth Quick-release Ratchet Drive 1 - Dura-Driver Magnetic Bit Driver 1 

- 3/8" Drive, 3" Extension 1 - 1" Driver Bits: Phillips®, Slotted, Torx®, and Hex 12 

- 

3/8" Drive, 12-Point Sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 

13/16" 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm 

16 

128


■■120 Position, 3° ratcheting arc ratchet with teardrop low profile 

head and flush mounted on/off switch for improved access 

■■Full Polish Chrome Sockets With Large Hard Stamp Size 

Markings 

■■Knurled Full Polish Extensions 


Rounding 


■■Includes storage case 

51 Pc. 1/4" Drive 6 Point SAE/Metric 

Standard and Deep Mechanics Tool Set 


80300P 099575830105 Boxed 4.75 lb 1 


81011P 1/4" Drive 120XP Full Polish Teardrop Ratchet 80127 1/4" Drive 6 Point Standard Metric Socket 5.5mm 

81008 1/4" Drive Thumbwheel Ratchet 80128 1/4" Drive 6 Point Standard Metric Socket 6mm 

81101 1/4" Drive Standard Extension 2" 80129 1/4" Drive 6 Point Standard Metric Socket 7mm 


80105 1/4" Drive 6 Point Standard SAE Socket 3/16" 80131D 1/4" Drive 6 Point Standard Metric Socket 9mm 







80112 1/4" Drive 6 Point Standard SAE Socket 7/16" 80138 1/4" Drive 6 Point Deep Metric Socket 4mm 

80113D 1/4" Drive 6 Point Standard SAE Socket 1/2" 80139 1/4" Drive 6 Point Deep Metric Socket 5mm 

80114D 1/4" Drive 6 Point Standard SAE Socket 9/16" 80140 1/4" Drive 6 Point Deep Metric Socket 5.5mm 

80115 1/4" Drive 6 Point Deep SAE Socket 3/16" 80141 1/4" Drive 6 Point Deep Metric Socket 6mm 

80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 80142 1/4" Drive 6 Point Deep Metric Socket 7mm 




80120D 1/4" Drive 6 Point Deep SAE Socket 11/32" 80146D 1/4" Drive 6 Point Deep Metric Socket 11mm 





80125 1/4" Drive 6 Point Standard Metric Socket 4mm 80100 1/4" Drive Universal Joint 


1/4" 

3 


129



Markings 


■■84 Tooth Full Polish Chrome Thin Profile Ratchet 


■■Sockets Feature Surface Drive® Technology to Reduce 


54 Pc. 1/4" Drive 6 Point Metric Standard and 

Deep Mechanics Tool Set 


80315 099575803154 Boxed 4.85 lb 1 

RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 1/4" 


81011F 1/4" Drive Full Polish Teardrop Ratchet 80143 1/4" Drive 6 Point Deep Metric Socket 8mm 

81008 1/4" Drive Thumbwheel Ratchet 80144 1/4" Drive 6 Point Deep Metric Socket 9mm 

81127 1/4" Drive 1/4" F x 3/8" M Adapter 80145 1/4" Drive 6 Point Deep Metric Socket 10mm 

81277 3/8" Drive 3/8" F x 1/4" M Adapter 80146D 1/4" Drive 6 Point Deep Metric Socket 11mm 

80167 1/4" Drive Triple Square Bit Socket, 4mm 80147 1/4" Drive 6 Point Deep Metric Socket 12mm 



80170D 1/4" Drive Triple Square Bit Socket, 8mm 80150 1/4" Drive 6 Point Deep Metric Socket 15mm 

81101 1/4" Drive Standard Extension 2" 80100 1/4" Drive Universal Joint 

81116 1/4" Drive Standard Extension 6" 80250 1/4" Drive 6 Point Flex Socket 5mm 

80125 1/4" Drive 6 Point Standard Metric Socket 4mm 80251D 1/4" Drive 6 Point Flex Socket 5.5mm 

80126 1/4" Drive 6 Point Standard Metric Socket 5mm 80252 1/4" Drive 6 Point Flex Socket 6mm 

80127 1/4" Drive 6 Point Standard Metric Socket 5.5mm 80253 1/4" Drive 6 Point Flex Socket 7mm 




80131D 1/4" Drive 6 Point Standard Metric Socket 9mm 80257 1/4" Drive 6 Point Flex Socket 11mm 




80135D 1/4" Drive 6 Point Standard Metric Socket 13mm 80261 1/4" Drive 6 Point Flex Socket 15mm 

80136 1/4" Drive 6 Point Standard Metric Socket 14mm 80191 1/4" Drive Deep External TORX® Socket, E-4 

80137 1/4" Drive 6 Point Standard Metric Socket 15mm 80192 1/4" Drive Deep External TORX® Socket, E-5 

80138 1/4" Drive 6 Point Deep Metric Socket 4mm 80193 1/4" Drive Deep External TORX® Socket, E-6 


80140 1/4" Drive 6 Point Deep Metric Socket 5.5mm 80195 1/4" Drive Deep External TORX® Socket, E-8 



130



Size Markings 




■■Included Thumbwheel Ratchet for Access in Tight Spaces 

■■Sockets Feature Surface Drive® Technology to Reduce Fastener 

Rounding 


51 Pc. 1/4" Drive 6 Point SAE/Metric Standard 

and Deep Mechanics Tool Set 


80300 099575803000 Boxed 4.85 lb 1 


81011F 1/4" Drive Full Polish Teardrop Ratchet 80127 1/4" Drive 6 Point Standard Metric Socket 5.5mm 

81008 1/4" Drive Thumbwheel Ratchet 80128 1/4" Drive 6 Point Standard Metric Socket 6mm 












80114D 1/4" Drive 6 Point Standard SAE Socket 9/16" 80140 1/4" Drive 6 Point Deep Metric Socket 5.5mm 













1/4" 

3 


131



Size Markings 




■■Sockets Feature Surface Drive® Technology Reduces Fastener 

Rounding 

■■Included Thumbwheel Ratchet for Access in Tight Spaces 





80301 099575803017 Boxed 4.85 lb 1 



81011F 1/4" Drive Full Polish Teardrop Ratchet 80199 1/4" Drive 12 Point Standard Socket 5.5mm 

81008 1/4" Drive Thumbwheel Ratchet 80200 1/4" Drive 12 Point Standard Socket 6mm 



80210 1/4" Drive 12 Point Standard SAE Socket 3/16" 80203 1/4" Drive 12 Point Standard Socket 9mm 





80215D 1/4" Drive 12 Point Standard SAE Socket 11/32" 80208 1/4" Drive 12 Point Standard Socket 14mm 


80217 1/4" Drive 12 Point Standard SAE Socket 7/16" 80230 1/4" Drive 12 Point Deep Socket 4mm 

80218 1/4" Drive 12 Point Standard SAE Socket 1/2" 80231 1/4" Drive 12 Point Deep Socket 5mm 

80219 1/4" Drive 12 Point Standard SAE Socket 9/16" 80232 1/4" Drive 12 Point Deep Socket 5.5mm 

80220 1/4" Drive 12 Point Deep Socket 3/16" 80233 1/4" Drive 12 Point Deep Socket 6mm 



80223D 1/4" Drive 12 Point Deep Socket 9/32" 80236 1/4" Drive 12 Point Deep Socket 9mm 



80226 1/4" Drive 12 Point Deep Socket 3/8" 80239D 1/4" Drive 12 Point Deep Socket 12mm 




80197 1/4" Drive 12 Point Standard Socket 4mm 80100 1/4" Drive Universal Joint 

80198 1/4" Drive 12 Point Standard Socket 5mm 

132



Size Markings 




■■1/4" Socket Driver With Ergonomic Dual Material Handle 




26 Pc. 1/4" Drive 6 Point SAE Standard and Deep 



80312DD 099575803123 Boxed 2.95 lb 1 


81011F 1/4" Drive Full Polish Teardrop Ratchet 80113D 1/4" Drive 6 Point Standard SAE Socket 1/2" 

81128 1/4" Socket Driver 80114D 1/4" Drive 6 Point Standard SAE Socket 9/16" 

81113D 1/4" Drive Standard Extension 3" 80115 1/4" Drive 6 Point Deep SAE Socket 3/16" 

81116 1/4" Drive Standard Extension 6" 80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 

80104D 1/4" Drive 6 Point Standard SAE Socket 5/32" 80117 1/4" Drive 6 Point Deep SAE Socket 1/4" 

80105 1/4" Drive 6 Point Standard SAE Socket 3/16" 80118 1/4" Drive 6 Point Deep SAE Socket 9/32" 


80107 1/4" Drive 6 Point Standard SAE Socket 1/4" 80120D 1/4" Drive 6 Point Deep SAE Socket 11/32" 





80112 1/4" Drive 6 Point Standard SAE Socket 7/16" 80100 1/4" Drive Universal Joint 

1/4" 

3 


133



Size Markings 







■■Meets or Exceeds ASME B107.1, B107.10 




80313 099575803130 Boxed 2.89 lb 1 



81011F 1/4" Drive Full Polish Teardrop Ratchet 80218 1/4" Drive 12 Point Standard SAE Socket 1/2" 


81113D 1/4" Drive Standard Extension 3" 80220 1/4" Drive 12 Point Deep Socket 3/16" 

81116 1/4" Drive Standard Extension 6" 80221 1/4" Drive 12 Point Deep Socket 7/32" 

80290 1/4" Drive 12 Point Standard SAE Socket 5/32" 80222 1/4" Drive 12 Point Deep Socket 1/4" 

80210 1/4" Drive 12 Point Standard SAE Socket 3/16" 80223D 1/4" Drive 12 Point Deep Socket 9/32" 





80215D 1/4" Drive 12 Point Standard SAE Socket 11/32" 80228 1/4" Drive 12 Point Deep Socket 1/2" 



134



Size Markings 








22 Pc. 1/4" Drive 6 and 12 Point SAE Standard 



80325 099575803253 Boxed 2.86 lb 1 


81011F 1/4" Drive Full Polish Teardrop Ratchet 80122D 1/4" Drive 6 Point Deep SAE Socket 7/16" 

81128 1/4" Socket Driver 80123 1/4" Drive 6 Point Deep SAE Socket 1/2" 



80115 1/4" Drive 6 Point Deep SAE Socket 3/16" 80212 1/4" Drive 12 Point Standard SAE Socket 1/4" 

80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 80213 1/4" Drive 12 Point Standard SAE Socket 9/32" 


80118 1/4" Drive 6 Point Deep SAE Socket 9/32" 80215D 1/4" Drive 12 Point Standard SAE Socket 11/32" 




1/4" 

3 


135




Size Markings 






■■Meets or Exceeds ASME B107.5M, B107.10 

22 Pc. 1/4" Drive 6 and 12 Point Metric Standard 



80327 099575803277 Boxed 3.04 lb 1 



81011F 1/4" Drive Full Polish Teardrop Ratchet 80148 1/4" Drive 6 Point Deep Metric Socket 13mm 

81128 1/4" Socket Driver 80149 1/4" Drive 6 Point Deep Metric Socket 14mm 



80141 1/4" Drive 6 Point Deep Metric Socket 6mm 80200 1/4" Drive 12 Point Standard Socket 6mm 





80146D 1/4" Drive 6 Point Deep Metric Socket 11mm 80205 1/4" Drive 12 Point Standard Socket 11mm 


136



Size Markings 








13 Pc. 1/4" Drive 6 Point SAE Mechanics Tool Set 


80324 099575803246 Boxed 1.17 lb 1 










Size Markings 








14 Pc. 1/4" Drive 6 Point Metric Mechanics 

Tool Set 


80326 099575803260 Boxed 1.74 lb 1 


81011F 1/4" Drive Full Polish Teardrop Ratchet 80129 1/4" Drive 6 Point Standard Metric Socket 7mm 

81128 1/4" Socket Driver 80130 1/4" Drive 6 Point Standard Metric Socket 8mm 

81101 1/4" Drive Standard Extension 2" 80131D 1/4" Drive 6 Point Standard Metric Socket 9mm 




80128 1/4" Drive 6 Point Standard Metric Socket 6mm 80135D 1/4" Drive 6 Point Standard Metric Socket 13mm 

1/4" 

3 


137


■■Surface Drive® Technology Reduces Fastener Rounding 

■■Chamfered Opening to Guide Fastener Into Socket 

■■Large Hard-Stamped Size Identification 

■■Double Line (SAE) and Knurled (Metric) Ring to Easily Identify 

Standard vs. Metric Sockets 

■■Full Polish Chrome Finish Cleans Easily and Resists Corrosion 



and Deep Socket Set 

Cat. No. UPC No. Packaging Drive Type Product Weight Shelf Pack Qty. 

80314D 099575803147 Boxed 6 Point 3.61 lb 1 















80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 80140 1/4" Drive 6 Point Deep Metric Socket 5.5mm 









80125 1/4" Drive 6 Point Standard Metric Socket 4mm 80149 1/4" Drive 6 Point Deep Metric Socket 14mm 



138









10 Pc. 1/4" Drive 6 Point SAE Standard Socket Set 


80303 099575803031 Carded 6 Point 0.55 lb 1 







■■Mid Length Design for Access to Difficult Fasteners 








10 Pc. 1/4" Drive 6 Point SAE Mid Length 

Socket Set 


80305S 099575833052 Carded 6 Point 0.59 lb 1 


80115S 1/4" Drive 6 Point Mid Length SAE Socket 3/16" 80120S 1/4" Drive 6 Point Mid Length SAE Socket 11/32" 





1/4" 

3 


139



■■Chamfered Opening to Guides Fastener Into Socket 






10 Pc. 1/4" Drive 12 Point SAE Standard 

Socket Set 


80307D 099575803079 Carded 12 Point 0.55 lb 1 















10 Pc. 1/4" Drive 6 Point SAE Deep Socket Set 




80115 1/4" Drive 6 Point Deep SAE Socket 3/16" 80120D 1/4" Drive 6 Point Deep SAE Socket 11/32" 

80116D 1/4" Drive 6 Point Deep SAE Socket 7/32" 80121 1/4" Drive 6 Point Deep SAE Socket 3/8" 




140













80220 1/4" Drive 12 Point Deep Socket 3/16" 80225 1/4" Drive 12 Point Deep Socket 11/32" 



80223D 1/4" Drive 12 Point Deep Socket 9/32" 80228 1/4" Drive 12 Point Deep Socket 1/2" 









13 Pc. 1/4" Drive 6 Point Metric Standard 

Socket Set 











1/4" 

3 


141










13 Pc. 1/4" Drive 6 Point Metric Mid Length 

Socket Set 




80138S 1/4" Drive 6 Point Mid Length Metric Socket 4mm 80145S 1/4" Drive 6 Point Mid Length Metric Socket 10mm 


80140S 1/4" Drive 6 Point Mid Length Metric Socket 5.5mm 80147S 1/4" Drive 6 Point Mid Length Metric Socket 12mm 




80144S 1/4" Drive 6 Point Mid Length Metric Socket 9mm 










Socket Set 




80197 1/4" Drive 12 Point Standard Socket 4mm 80204 1/4" Drive 12 Point Standard Socket 10mm 


80199 1/4" Drive 12 Point Standard Socket 5.5mm 80206 1/4" Drive 12 Point Standard Socket 12mm 




80203 1/4" Drive 12 Point Standard Socket 9mm 

142









13 Pc. 1/4" Drive 6 Point Metric Deep Socket Set 




80138 1/4" Drive 6 Point Deep Metric Socket 4mm 80145 1/4" Drive 6 Point Deep Metric Socket 10mm 

80139 1/4" Drive 6 Point Deep Metric Socket 5mm 80146D 1/4" Drive 6 Point Deep Metric Socket 11mm 

80140 1/4" Drive 6 Point Deep Metric Socket 5.5mm 80147 1/4" Drive 6 Point Deep Metric Socket 12mm 
















80230 1/4" Drive 12 Point Deep Socket 4mm 80237 1/4" Drive 12 Point Deep Socket 10mm 


80232 1/4" Drive 12 Point Deep Socket 5.5mm 80239D 1/4" Drive 12 Point Deep Socket 12mm 




80236 1/4" Drive 12 Point Deep Socket 9mm 

1/4" 

3 


143


■■Large Hard-Stamped Identification 

■■Entry Angle Guides Fastener 


7 Pc. 1/4" Drive 6 Point SAE Flex Socket Set 


80310D 099575803109 Carded 1.20 lb 1 


80262 1/4" Drive 6 Point Flex Socket 3/16" 80266 1/4" Drive 6 Point Flex Socket 7/16" 

80263D 1/4" Drive 6 Point Flex Socket 1/4" 80267 1/4" Drive 6 Point Flex Socket 1/2" 






12 Pc. 1/4" Drive 6 Point Metric Flex Socket Set 



80311 099575803116 Carded 2.50 lb 1 


80250 1/4" Drive 6 Point Flex Socket 5mm 80256 1/4" Drive 6 Point Flex Socket 10mm 

80251D 1/4" Drive 6 Point Flex Socket 5.5mm 80257 1/4" Drive 6 Point Flex Socket 11mm 

















1/4" Drive 120XP Teardrop Ratchet 

Cat. No. UPC No. Overall Length No. of Positions Product Weight Shelf Pack Qty. 

81011P 099575810176 5.118 in 120 0.29 lb 1 

144







1/4" Drive Full Polish Teardrop Ratchet 

Cat. No. UPC No. Packaging Overall Length Head Width Head Thickness Tooth Count Repair Kit Product Weight Shelf Pack Qty. 

81011F 099575811111 Carded 5.130 in 0.98 in 0.35 in 84 81099F 0.27 lb 1 






1/4" Drive Full Polish Flex Teardrop Ratchet 








1/4" Drive Quick Release Teardrop Ratchet 

1/4" 

Cat. No. UPC No. Packaging Overall Length Head Width Head Thickness Tooth Count Product Weight Shelf Pack Qty. 

81014 099575810145 Carded 5.630 in 1.00 in 0.47 in 45 0.30 lb 1 

3 



■■Dual Material Comfort Grip Handle 



1/4" Drive Cushion Grip Teardrop Ratchet 








1/4" Drive Cushion Grip Flex Teardrop Ratchet 




145


■■360 Degree Rotating Head for Speed and Access 

■■Round Shaped Head 




1/4" Drive Cushion Grip Roto Ratchet 



■■For Non-Quick Release and Non-Roto Ratchets 

1/4" Drive Ratchet Repair Kits 


Cat. No. UPC No. Packaging Description Fits Product Number 

81099F 099575811999 Bagged 

81099P 099575891991 Bagged 

■■72 - Tooth Gear for 5 Degree Ratchet Angle 



■■Professional, Full Polish Finish 

■■Spinner Handle Designed for Ultra Fast Action 

1/4" Drive Non-Quick Release Ratchet 

Repair Kit 84 Tooth 

1/4" Drive Non-Quick Release Ratchet 

Repair Kit Dual Pawl 120XP 

81011, 81012, 81007, 81009, 

81011F, 81012F, 81007F, 81009F 

1/4" Drive Spinner Handle 

Cat. No. UPC No. Packaging Length Product Weight Shelf Pack Qty. 

81128 099575811289 Carded 15.75 in 0.30 lb 1 

Tooth 

Count 

1/4" Drive Thumbwheel Ratchet 

No. of 

Positions 

1/4" Drive Flex Handle / Breaker Bar 

Product 

Weight 

Shelf Pack 

Qty. 

84 - 0.04 lb 1 

81011P - 120 0.06 lb 1 


81008 099575810084 Boxed 72 0.31 lb 1 

Cat. No. UPC No. Packaging Overall Length Product Weight Shelf Pack Qty. 

81013 099575810138 Carded 5.40 0.26 lb 1 

146


■■Universal Joint Allows for Greater Access 


1/4" Drive Universal Joint 

Cat. No. UPC No. Packaging Overall Length Female Drive Size Male Drive Size Product Weight Shelf Pack Qty. 

80100 099575801006 Carded 1.375 in 1/4" 1/4" 0.04 lb 1 

■■Strong Magnetic Tips Allow for Contact Through the Base of the 

Socket to Hold Nuts and Bolts in Place During Use 


1/4" Drive Magnetic Universal Joint 


81255 099575812552 Carded 1.75 in 1/4" 1/4" 0.20 lb 1 

1/4" 


1/4" Drive Adapter 

3 

Cat. No. UPC No. Packaging Description Overall Length Female Drive Size 

Male Drive 

Size Product Weight Shelf Pack Qty. 

81127 099575811272 Carded 1/4" Drive 1/4" F x 3/8" M Adapter 1.00 in 1/4" 3/8" 0.04 lb 1 



1/4" Drive Magnetic Adapter 

Cat. No. UPC No. Packaging Description Female Drive Size Male Drive Size Product Weight Shelf Pack Qty. 

81258 099575812583 Carded 1/4" Drive 1/4" F x 3/8" M Adapter, Magnetic 1/4" 3/8" 0.20 lb 1 


147




5 Pc. 1/4" Drive Standard Extension Set 


81002D 099575810022 Carded 0.99 lb 1 


81101 1/4" Drive Standard Extension 2" 81116 1/4" Drive Standard Extension 6" 

81113D 1/4" Drive Standard Extension 3" 81118 1/4" Drive Standard Extension 14" 




1/4" Drive Standard Extensions 


Cat. No. UPC No. Packaging Length Wobble Product Weight Shelf Pack Qty. 

81101 099575811012 Carded 2 in No 0.04 lb 1 

81113D 099575811135 Carded 3 in No 0.07 lb 1 


81116 099575811166 Carded 6 in No 0.15 lb 1 


81118 099575811180 Carded 14 in No 0.31 lb 1 





1/4" Drive Magnetic Extension 


81261 099575812613 Carded 6 in No 0.70 lb 1 

■■Use as either Standard Extension when Fully Inserted in Socket 

or as a Wobble Extension when Partially Inserted 


■■Full Polish Chome Finish 

4 Pc. 1/4" Drive Wobble Extension Set 


81004D 099575810046 Carded 0.83 lb 1 


81119 1/4" Drive Wobble Extension 2" 81121 1/4" Drive Wobble Extension 6" 


148



or as a Wobble Extention when Partially Inserted 



1/4" Drive Wobble Extensions 


81119 099575811197 Carded 2 in Yes 0.04 lb 1 






3 Pc. 1/4" Drive Locking Extension Set 


81003 099575810039 Carded 0.35 lb 1 


81123 1/4" Drive Locking Extension 2" 81126 1/4" Drive Locking Extension 6" 

81124 1/4" Drive Locking Extension 3" 

1/4" 



1/4" Drive Locking Extensions 


81123 099575811234 Carded 2 in No 0.04 lb 1 

81124 099575811241 Carded 3 in No 0.09 lb 1 

81125 099575811258 Carded 4 in No 0.15 lb 1 

81126 099575811265 Carded 6 in No 0.20 lb 1 

3 


149








■■Meets or Exceeds ASME B107.1 and US Federal Spec. 

GGG-W-641 E 

1/4" Drive 6 and 12 Point SAE Standard 

Length Sockets 


Cat. No. UPC No. Packaging 

Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80104D 099575801044 Carded 6 Point 5/32 in 0.465 in 0.272 in 0.965 in 0.134 in 0.295 in 0.453 in 0.02 lb 1 

80105 099575801051 Carded 6 Point 3/16 in 0.465 in 0.307 in 0.965 in 0.157 in 0.315 in 0.453 in 0.02 lb 1 





















Product 

Weight 

Shelf 

Pack Qty. 

150









1/4" Drive 6 and 12 Point Metric Standard 


Cat. No. UPC No. Packaging Drive Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80125 099575801259 Carded 6 Point 4 mm 0.465 in 0.264 in 0.965 in 0.134 in 0.315 in 0.453 in 0.01 lb 1 


80127 099575801273 Carded 6 Point 5.5 mm 0.465 in 0.339 in 0.965 in 0.157 in 0.315 in 0.453 in 0.02 lb 1 




80131D 099575801310 Carded 6 Point 9 mm 0.516 in 0.516 in 0.965 in 0.220 in 0.413 in 0.453 in 0.02 lb 1 




















Product 

Weight 

Shelf Pack 

Qty. 

1/4" 

3 


151


■■Surface Drive ® Technology Reduces Fastener Rounding 

■■Chamfered Opening To Guides Fastener Into Socket 


■■Double Line (SAE) and Knurled (Metric) Ring To Easily Identify 




1/4" Drive 6 Point SAE Mid Length Sockets 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80115S 099575851155 Carded 6 Point 3/16 in 0.46 in 0.30 in 1.25 in 0.12 in 0.31 in 0.64 in 0.03 lb 1 




80119S 099575831195 Carded 6 Point 5/16 in 0.46 in 0.46 in 1.25 in 0.20 in 0.53 in - 0.03 lb 1 






■■Surface Drive ® Technology Reduces Fastener Rounding 

■■Chamfered Opening To Guides Fastener Into Socket 


■■Double Line (SAE) and Knurled (Metric) Ring To Easily Identify 





Drive 

Type 

Product 

Weight 

1/4" Drive 6 Point Metric Mid Length Sockets 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80138S 099575821387 Carded 6 Point 4 mm 0.46 in 0.27 in 1.25 in 0.08 in 0.31 in 0.76 in 0.03 lb 1 


80140S 099575821400 Carded 6 Point 5.5 mm 0.46 in 0.34 in 1.25 in 0.14 in 0.47 in 0.76 in 0.03 lb 1 



80143S 099575821431 Carded 6 Point 8 mm 0.46 in 0.46 in 1.25 in 0.24 in 0.53 in - 0.03 lb 1 








Product 

Weight 

Shelf 

Pack Qty. 

Shelf 

Pack Qty. 

152









GGG-W-641 E 

1/4" Drive 6 and 12 Point SAE Deep 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





















Product 

Weight 

Shelf 

Pack Qty. 

1/4" 

3 


153









1/4" Drive 6 and 12 Point Metric Deep Length 

Sockets 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 



























Product 

Weight 

Shelf 

Pack Qty. 

154


■■Large Hard Stamped Identification 



1/4" Drive 6 Point SAE Flex Sockets 

Cat. No. UPC No. Packaging Fastener Size 

Dim. A: Drive 

End 

Dim. B: 

Wrench End 

Dim. C: Overall 

Length 

Dim. E: 

Wrench Depth 

80262 099575802621 Carded 3/16 in 0.551 in 0.378 in 1.378 in 0.240 in 0.04 lb 1 

80263D 099575802638 Carded 1/4 in 0.551 in 0.378 in 1.378 in 0.270 in 0.04 lb 1 






Product 

Weight 

Shelf Pack 

Qty. 




1/4" Drive 6 Point Metric Flex Sockets 

1/4" 

3 


Dim. A: Drive 

End 

Dim. B: 

Wrench End 


Length 

Dim. E: 

Wrench Depth 

80250 099575802508 Carded 5 mm 0.551 in 0.337 in 1.378 in 0.270 in 0.04 lb 1 

80251D 099575802515 Carded 5.5 mm 0.551 in 0.378 in 1.378 in 0.290 in 0.04 lb 1 











Product 

Weight 

Shelf Pack 

Qty. 


155






10 Pc. 1/4" Drive SAE Hex Bit Socket Set 


80323 099575803239 Carded 0.67 lb 1 


80151D 1/4" Drive Hex Bit Socket, 1/16" 80156 1/4" Drive Hex Bit Socket, 9/64" 










6 Pc. 1/4" Drive Metric Hex Bit Socket Set 


80321 099575803215 Carded 0.43 lb 1 



80162 1/4" Drive Hex Bit Socket, 2.5mm 80165 1/4" Drive Hex Bit Socket, 5mm 





6 Pc. 1/4" Drive External Torx® Deep Socket Set 


80322 099575803222 Carded 0.46 lb 1 


80191 1/4" Drive Deep External TORX® Socket, E-4 80194 1/4" Drive Deep External TORX® Socket, E-7 



156






4 Pc. 1/4" Drive Metric Triple Square Bit 

Socket Set 


80320 099575803208 Carded 0.37 lb 1 



80168 1/4" Drive Triple Square Bit Socket, 5mm 80170D 1/4" Drive Triple Square Bit Socket, 8mm 




1/4" Drive SAE/Metric Hex Bit Sockets 

1/4" 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 

80151D 099575801518 Carded 1/16 in 0.508 in 0.508 in 1.530 in 0.984 in 0.655 0.05 lb 1 

80152 099575801525 Carded 5/64 in 0.508 in 0.508 in 1.530 in 0.984 in 0.656 0.05 lb 1 









80161 099575801617 Carded 2 mm 0.508 in 0.508 in 1.530 in 0.984 in 0.665 0.05 lb 1 

80162 099575801624 Carded 2.5 mm 0.508 in 0.508 in 1.530 in 0.984 in 0.666 0.05 lb 1 





Product 

Weight 

Shelf Pack 

Qty. 

3 


157





1/4" Drive Metric Triple Square Bit Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 


Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 




80170D 099575801709 Carded 8 mm 0.508 in 0.508 in 1.290 in 0.748 in 0.415 0.06 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 



1/4" Drive Torx® Bit Sockets 






Fastener 

Size 

Fastener 

Size 

Dim. A: 

Drive End 

1/4" Drive Torx® Tamper Proof Bit Sockets 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. B: Nose 

Diameter 


Length 


Length 

Dim. D: Bit 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 

80171 099575801716 Carded T8 0.508 in 0.508 in 1.530 in 0.984 in 0.688 0.05 lb 1 





80176D 099575801761 Carded T27 0.508 in 0.508 in 1.530 in 0.984 in 0.688 0.05 lb 1 


Exposed Bit 

Length 









Product 

Weight 

Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

158




1/4" Drive Torx® Long Bit Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 








Product 

Weight 

Shelf Pack 

Qty. 

1/4" 

■■Black Oxide Finish 

1/4" Drive External Torx® Sockets 

3 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Bolt Depth 

Dim. F: 

Length to 

Shoulder 

80186 099575801860 Carded E4 0.508 in 0.251 in 0.984 in 0.078 in 0.137 in 0.044 in 0.13 lb 1 


80188D 099575801884 Carded E6 0.508 in 0.322 in 0.984 in 0.11 in 0.255 in 0.046 in 0.13 lb 1 



Product 

Weight 

Shelf Pack 

Qty. 


159




1/4" Drive External Torx® Deep Sockets 


Dim. A: Drive 

End 

Dim. B: Nose 

Diameter 


Length Product Weight Shelf Pack Qty. 

80191 099575801914 Carded E4 0.470 in 0.224 in 1.968 in 0.20 lb 1 






80243 099575802430 Carded E11 0.470 in - 1.968 in 0.25 lb 1 




■■For use with Tamper-Proof Torx® Exchangeable Bits 

1/4" Drive Bit Adapter 

Cat. No. UPC No. Packaging Dim. A: Drive End Dim. B: Nose Diameter Dim. C: Overall Length Product Weight Shelf Pack Qty. 

80480 099575804809 Carded 0.508 in 0.251 in 0.984 in 0.04 lb 1 


1/4" Drive Tamper-Proof Torx® 

Exchangeable Bits 

Dim. A: Drive 

End 

Dim. B: Nose 

Diameter 


Length 

Dim. D: Bit 

Length 

80471 099575804717 Carded T10 0.508 in 0.508 in 0.984 in 0.984 in 0.01 lb 1 






Product 

Weight 

Shelf Pack 

Qty. 

160



■■Durable, Long Lasting Blow Molded Case Will Not Dent, Will Not 

Rust, Even Under the Harshest Conditions -Two Piece Latches 

Securely Hold the Box Closed 

■■Bottom Half of the Case Can Be Removed and Placed in a Tool 

Storage Drawer for Organization 

■■EYE-D Markings on The Sockets Optimize Size Visibility, Also 

Providing SAE / Metric Differentiation - Socket Sizes are Also 

Marked in Blow Mold 

■■Ratchet has a Compact Head Design, Recessed Reversing Lever 

With On/Off Markings, Unique Hour Glass Handle Design, as 

Well as The "Torque Wrap" Design Incorporating a 10 Degree 

Ratcheting Arc 

■■Sockets Incorporate A Radius Corner Design that Engages the 

Flats of Tthe Fastener as Well as a Unique Retention Method, 

Cold Form Ball Recess, Which Provides Consistent Secure 

Retention of the Socket to the Drive Tool 

■■Knurling on the Extension Shaft Provides a Non-Slip Grip to 

Quickly Run Down / Remove Fasteners 

■■All Tools are Manufactured From High Alloy Steel Using the Most 

Up-To-Date Manufacturing Process and Heat Treat for Greater 

Strength and Durability 

■■Meets Or Exceeds ASME B107.1-2002, B107.10M and US Federal 


50 Pc. 1/4" Drive 6 Point SAE/Metric Mechanics 

Tool Set 




10-992 1/4" Drive Armstrong MAXX Standard Handle Ratchet 37-083 1/4" Drive 6 Point Standard Socket 5.5mm 

10-921 1/4" Drive Extension 2" 37-006 1/4" Drive 6 Point Standard Socket 6mm 


10-006D 1/4" Drive 6 Point Standard Socket 3/16" 37-008 1/4" Drive 6 Point Standard Socket 8mm 

10-007D 1/4" Drive 6 Point Standard Socket 7/32" 37-009D 1/4" Drive 6 Point Standard Socket 9mm 



10-010 1/4" Drive 6 Point Standard Socket 5/16" 37-012D 1/4" Drive 6 Point Standard Socket 12mm 

10-011 1/4" Drive 6 Point Standard Socket 11/32" 37-013 1/4" Drive 6 Point Standard Socket 13mm 



10-016D 1/4" Drive 6 Point Standard Socket 1/2" 37-204 1/4" Drive 6 Point Deep Socket 4mm 

10-018D 1/4" Drive 6 Point Standard Socket 9/16" 37-205 1/4" Drive 6 Point Deep Socket 5mm 

10-206 1/4" Drive 6 Point Deep Socket 3/16" 37-283 1/4" Drive 6 Point Deep Socket 5.5mm 

10-207 1/4" Drive 6 Point Deep Socket 7/32" 37-206 1/4" Drive 6 Point Deep Socket 6mm 









37-004 1/4" Drive 6 Point Standard Socket 4mm 37-215 1/4" Drive 6 Point Deep Socket 15mm 

37-005 1/4" Drive 6 Point Standard Socket 5mm 10-947 1/4" Drive Universal Joint 

1/4" 

3 


161








tool 






into the foam 







37 Pc. 1/4" Drive 6 and 8 Point SAE Standard and 






10-972 1/4" Drive Teardrop Ratchet 10-012 1/4" Drive 6 Point Standard Socket 3/8" 

10-938 1/4" Drive T-Handle 5" 10-014 1/4" Drive 6 Point Standard Socket 7/16" 

10-943 1/4" Drive Plastic Handle Driver 6" 10-016D 1/4" Drive 6 Point Standard Socket 1/2" 

10-821 1/4" Drive Phillips Screwdriver Socket #1 10-018D 1/4" Drive 6 Point Standard Socket 9/16" 

10-822 1/4" Drive Phillips Screwdriver Socket #2 10-206 1/4" Drive 6 Point Deep Socket 3/16" 

10-823 1/4" Drive Phillips Screwdriver Socket #3 10-207 1/4" Drive 6 Point Deep Socket 7/32" 

10-801 1/4" Drive Scredriver Socket 3/16" x 1/32" Tip 10-208 1/4" Drive 6 Point Deep Socket 1/4" 

10-802 1/4" Drive Scredriver Socket 1/4" x 1/32" Tip 10-209 1/4" Drive 6 Point Deep Socket 9/32" 

10-918 1/4" Drive Breaker Bar 5-3/4" 10-210 1/4" Drive 6 Point Deep Socket 5/16" 

10-921 1/4" Drive Extension 2" 10-211 1/4" Drive 6 Point Deep Socket 11/32" 



10-929 1/4" Drive Flex Extension 6" 10-216 1/4" Drive 6 Point Deep Socket 1/2" 

10-006D 1/4" Drive 6 Point Standard Socket 3/16" 10-218 1/4" Drive 6 Point Deep Socket 9/16" 




10-010 1/4" Drive 6 Point Standard Socket 5/16" 10-947 1/4" Drive Universal Joint 


162








tool 






into the foam 





■■Meets or Exceeds ASME B107.5M-2002, B107.10M 

29 Pc. 1/4" Drive 6 Point Metric Standard and Deep 



44-205D 781412442052 Blow Mold Case 4.07 lb 1 


10-972 1/4" Drive Teardrop Ratchet 37-014D 1/4" Drive 6 Point Standard Socket 14mm 

10-943 1/4" Drive Plastic Handle Driver 6" 37-204 1/4" Drive 6 Point Deep Socket 4mm 

10-921 1/4" Drive Extension 2" 37-205 1/4" Drive 6 Point Deep Socket 5mm 

10-923 1/4" Drive Extension 6" 37-283 1/4" Drive 6 Point Deep Socket 5.5mm 



37-083 1/4" Drive 6 Point Standard Socket 5.5mm 37-208 1/4" Drive 6 Point Deep Socket 8mm 




37-009D 1/4" Drive 6 Point Standard Socket 9mm 37-212 1/4" Drive 6 Point Deep Socket 12mm 



37-012D 1/4" Drive 6 Point Standard Socket 12mm 10-947 1/4" Drive Universal Joint 


1/4" 

3 


163








tool 






into the foam 













10-972 1/4" Drive Teardrop Ratchet 10-018D 1/4" Drive 6 Point Standard Socket 9/16" 

10-943 1/4" Drive Plastic Handle Driver 6" 10-206 1/4" Drive 6 Point Deep Socket 3/16" 







10-010 1/4" Drive 6 Point Standard Socket 5/16" 10-214 1/4" Drive 6 Point Deep Socket 7/16" 





164








tool 






into the foam 













10-943 1/4" Drive Plastic Handle Driver 6" 10-306 1/4" Drive 12 Point Deep Socket 3/16" 












1/4" 

3 


165







15-248A 781412152487 Metal Box 3.05 lb 1 



10-967A 1/4" Drive Teardrop Quick Release Ratchet Knurled Handle 5-1/2" 10-206A 1/4" Drive 6 Point Deep Socket 3/16" 

10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 10-207A 1/4" Drive 6 Point Deep Socket 7/32" 

10-919A 1/4" Drive Extension 1-1/2" 10-208A 1/4" Drive 6 Point Deep Socket 1/4" 




10-010 1/4" Drive 6 Point Standard Socket 5/16" 10-212A 1/4" Drive 6 Point Deep Socket 3/8" 



10-014A 1/4" Drive 6 Point Standard Socket 7/16" 10-947 1/4" Drive Universal Joint 







44-321A 781412443219 Metal Box 3.03 lb 1 


10-967A 1/4" Drive Teardrop Quick Release Ratchet Knurled Handle 5-1/2" 37-011A 1/4" Drive 6 Point Standard Socket 11mm 

10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 37-012A 1/4" Drive 6 Point Standard Socket 12mm 

10-919A 1/4" Drive Extension 1-1/2" 37-206A 1/4" Drive 6 Point Deep Socket 6mm 

10-923A 1/4" Drive Extension 6" No Knurling 37-207A 1/4" Drive 6 Point Deep Socket 7mm 

37-004A 1/4" Drive 6 Point Standard Socket 4mm 37-208A 1/4" Drive 6 Point Deep Socket 8mm 





37-009A 1/4" Drive 6 Point Standard Socket 9mm 10-947 1/4" Drive Universal Joint 


166








tool 






into the foam 







19 Pc. 1/4" Drive 6 and 8 Point SAE Mechanics 

Tool Set 





10-943 1/4" Drive Plastic Handle Driver 6" 10-012 1/4" Drive 6 Point Standard Socket 3/8" 

10-918 1/4" Drive Breaker Bar 5-3/4" 10-014 1/4" Drive 6 Point Standard Socket 7/16" 






10-009D 1/4" Drive 6 Point Standard Socket 9/32" 10-947 1/4" Drive Universal Joint 


1/4" 

3 


167








tool 






into the foam 






17 Pc. 1/4" Drive 6 Point Metric Mechanics Tool Set 


44-210D 781412442106 Blow Mold Case 2.28 lb 1 



10-972 1/4" Drive Teardrop Ratchet 37-008 1/4" Drive 6 Point Standard Socket 8mm 

10-943 1/4" Drive Plastic Handle Driver 6" 37-009D 1/4" Drive 6 Point Standard Socket 9mm 



37-004 1/4" Drive 6 Point Standard Socket 4mm 37-012D 1/4" Drive 6 Point Standard Socket 12mm 

37-005 1/4" Drive 6 Point Standard Socket 5mm 37-013 1/4" Drive 6 Point Standard Socket 13mm 

37-083 1/4" Drive 6 Point Standard Socket 5.5mm 37-014D 1/4" Drive 6 Point Standard Socket 14mm 



168








tool 






into the foam 











10-947 1/4" Drive Universal Joint 10-009D 1/4" Drive 6 Point Standard Socket 9/32" 


10-921 1/4" Drive Extension 2" 10-011 1/4" Drive 6 Point Standard Socket 11/32" 






1/4" 

3 




with Round Head Ratchet 


44-323A 781412443233 Metal Box 1.42 lb 1 


10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 37-007A 1/4" Drive 6 Point Standard Socket 7mm 

10-919A 1/4" Drive Extension 1-1/2" 37-008A 1/4" Drive 6 Point Standard Socket 8mm 

10-923A 1/4" Drive Extension 6" No Knurling 37-009A 1/4" Drive 6 Point Standard Socket 9mm 

10-915A 1/4" Drive Roundhead Ratchet Knurled Handle 37-010A 1/4" Drive 6 Point Standard Socket 10mm 





169




13 Pc. 1/4" Drive 6 Point SAE Mechanics Tool Set with 

Quick Release Ratchet 


15-246A 781412152463 Metal Box 1.44 lb 1 


10-967A 1/4" Drive Teardrop Quick Release Ratchet Knurled Handle 5-1/2" 10-009A 1/4" Drive 6 Point Standard Socket 9/32" 

10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 10-010 1/4" Drive 6 Point Standard Socket 5/16" 

10-919A 1/4" Drive Extension 1-1/2" 10-011 1/4" Drive 6 Point Standard Socket 11/32" 

10-923A 1/4" Drive Extension 6" No Knurling 10-012A 1/4" Drive 6 Point Standard Socket 3/8" 

10-006A 1/4" Drive 6 Point Standard Socket 3/16" 10-014A 1/4" Drive 6 Point Standard Socket 7/16" 






13 Pc. 1/4" Drive 6 Point SAE Mechanics Tool Set with 

Round Head Ratchet 


15-247A 781412152470 Metal Box 1.42 lb 1 



10-944 1/4" Drive Plastic Handle Driver 6" No Female Drive End 10-010 1/4" Drive 6 Point Standard Socket 5/16" 

10-919A 1/4" Drive Extension 1-1/2" 10-011 1/4" Drive 6 Point Standard Socket 11/32" 

10-915A 1/4" Drive Roundhead Ratchet Knurled Handle 10-012A 1/4" Drive 6 Point Standard Socket 3/8" 




170








tool 






into the foam 

















1/4" 

3 


171








tool 






into the foam 

















10-109 1/4" Drive 12 Point Standard Socket 9/32" 10-118D 1/4" Drive 12 Point Standard Socket 9/16" 


■■Radius Corner Design Engages the Flats of the Fastener, Not 

the Corners, Providing Up to 15% -20% More Torque While 

Reducing Fastener Rounding, Enhancing the Turning of Worn 

Fasteners 

■■EYE-D Markings Optimize Size Visibility, Also Providing SAE / 

Metric Differentiation 

■■Unique Socket Retention Method, Cold Form Ball Recess, 

Provides Consistent Secure Retention of the Socket to the Drive 

Tool Eliminating the Possibility of Either a Loose Fit or Tight Fit 

■■Socket Wall Dimensions are Optimized to Provide Strength While 

Retaining Access to Restricted Fasteners 

■■Meets or Exceeds ASME B107.1-2002 and US Federal Spec. 

GGG-W-641E 

10 Pc. 1/4" Drive 6 Point SAE Socket Set 


15-245 781412152456 Boxed 6 Point 0.66 lb 1 


16-831 9" Socket Rail Steel 10-010 1/4" Drive 6 Point Standard Socket 5/16" 

16-841 1/4" Drive Socket Clips Steel 10-011 1/4" Drive 6 Point Standard Socket 11/32" 





172




GGG-W-641E 


10 Pc. 1/4" Drive 6 Point SAE A Series Socket Set 


15-249A 781412152494 Boxed 6 Point 0.50 lb 1 


10-005A 1/4" Drive 6 Point Standard Socket 5/32" 10-010AD 1/4" Drive 6 Point Standard Socket 5/16" 

10-006A 1/4" Drive 6 Point Standard Socket 3/16" 10-011AD 1/4" Drive 6 Point Standard Socket 11/32" 








Fasteners 









GGG-W-641E 



15-240 781412152401 Boxed 12 Point 0.53 lb 1 


16-831 9" Socket Rail Steel 10-110D 1/4" Drive 12 Point Standard Socket 5/16" 






1/4" 

3 


173






Fasteners 








■■Meets or Exceeds ASME B107.5M-2002 

12 Pc. 1/4" Drive 6 Point Metric Socket Set 


44-215D 781412442151 Boxed 6 Point 2.70 lb 1 



16-831 9" Socket Rail Steel 37-008 1/4" Drive 6 Point Standard Socket 8mm 

16-841 1/4" Drive Socket Clips Steel 37-009D 1/4" Drive 6 Point Standard Socket 9mm 



37-083 1/4" Drive 6 Point Standard Socket 5.5mm 37-012D 1/4" Drive 6 Point Standard Socket 12mm 



10 Pc. 1/4" Drive 6 Point Metric A Series Socket Set 












174






Fasteners 









GGG-W-641E 



15-255 781412152555 Boxed 6 Point 1.04 lb 1 


16-831 9" Socket Rail Steel 10-210 1/4" Drive 6 Point Deep Socket 5/16" 

16-841 1/4" Drive Socket Clips Steel 10-211 1/4" Drive 6 Point Deep Socket 11/32" 

10-206 1/4" Drive 6 Point Deep Socket 3/16" 10-212 1/4" Drive 6 Point Deep Socket 3/8" 




1/4" 





Fasteners 









GGG-W-641E 



15-250 781412152500 Boxed 12 Point 0.87 lb 1 








3 


175






Fasteners 











44-220D 781412442205 Boxed 6 Point 2.75 lb 1 



16-831 9" Socket Rail Steel 37-208 1/4" Drive 6 Point Deep Socket 8mm 

16-841 1/4" Drive Socket Clips Steel 37-209 1/4" Drive 6 Point Deep Socket 9mm 

37-204 1/4" Drive 6 Point Deep Socket 4mm 37-210 1/4" Drive 6 Point Deep Socket 10mm 


37-283 1/4" Drive 6 Point Deep Socket 5.5mm 37-212 1/4" Drive 6 Point Deep Socket 12mm 
















15-265 781412152654 Boxed 0.90 lb 1 









176















44-225 781412442250 Boxed 2.70 lb 1 


16-831 9" Socket Rail Steel 37-705 1/4" Drive Standard Length Hex Driver Socket 3mm Bit 

16-841 1/4" Drive Socket Clips Steel 37-707 1/4" Drive Standard Length Hex Driver Socket 4mm Bit 


37-704 1/4" Drive Standard Length Hex Driver Socket 2.5mm Bit 37-711 1/4" Drive Standard Length Hex Driver Socket 6mm Bit 












10 Pc. 1/4" Drive SAE Extra Long Hex Bit Socket Set 


15-260 781412152609 Boxed 1.10 lb 1 


16-831 9" Socket Rail Steel 10-749 1/4" Drive Extra Long Hex Driver Socket 9/64" Bit 

16-841 1/4" Drive Socket Clips Steel 10-750 1/4" Drive Extra Long Hex Driver Socket 5/32" Bit 

10-745 1/4" Drive Extra Long Hex Driver Socket 5/64" Bit 10-751 1/4" Drive Extra Long Hex Driver Socket 3/16" Bit 




1/4" 

3 


177













6 Pc. 1/4" Drive Torx® Bit Socket Set 


15-270 781412152708 Boxed 2.75 lb 1 


16-831 9" Socket Rail Steel 10-874 1/4" Drive Standard Length Torx Driver Socket T20 

16-841 1/4" Drive Socket Clips Steel 10-876 1/4" Drive Standard Length Torx Driver Socket T25 

10-870 1/4" Drive Standard Length Torx Driver Socket T10 10-878 1/4" Drive Standard Length Torx Driver Socket T27 



1/4" Drive Teardrop Ratchet 


■■Compact Head Design Permits Use in Confined areas. 

■■Torque Wrap Design Reduces Stress on Gear and Pawl Teeth for 

Greater Strength and Durability 

■■Unique "Hour Glass" Handle Design Has a Concave Shape 

Conforming to the Grip of the Hand Which Reduces Fatigue and 

Improved Comfort 

■■Manufactured From High Alloy Steel Using the Most Up-To-Date 

Manufacturing Process and Heat Treat for Greater Strength and 

Durability 

■■Meets or Exceeds ASME B107.10M and US Federal Spec. GGG- 

W-641E 


10-972 781412109726 Bagged 5.281 in 0.875 in 0.969 in 36 10-990 0.27 lb 1 










Durability 


W-641E 

1/4" Drive Black Oxide Teardrop Ratchet 



178


1/4" Drive Maxx Standard Handle Ratchet 


■■Unique Enclosed Head (No Screws) with Two O-Rings Resists 

Contaminants for Extreme Strength and Long Life. 

■■Sleek Tapered Head with a Low Profile Design Permits Access in 

Extremely Confined areas. 



■■Improved Modified "Hour Glass" Handle Design Conforms to the 

Shape of the Hand for Maximum Comfort and Minimal Fatigue. 

■■Meets or Exceeds Aerospace Standards AS4283A-2004, ASME 

B107.10M and US Federal Spec. GGG-W-641E 


10-992 781412109924 Bagged 5.475 in 0.950 in 0.362 in 88 0.23 lb 1 

1/4" Drive Maxx Locking Flex Ratchet 


■■9-Position Locking Flex Head Maximizes Safety and Maintains 

Position Regardless of Load 







■■Meets or Exceeds Aerospace Standards AS4283A-2004, ASME 




1/4" 

3 

1/4" Drive Quick Release Ratchet 


■■Meets or Exceeds ASME B107.10M and US Federal Spec. 

GGG-W-641E 


10-967A 781412109672 Bagged 5.500 in 1.000 in 0.460 in 36 0.28 lb 1 

1/4" Drive Ratchet 



W-641E 




179








Durability 

1/4" Drive Round Head Ratchet 









■■11-Position Locking Indexible Head Maximizes Safety and 

Maintains Position for Multi-Angle, Multi-Application Use 

Regardless of Load 

■■Strip Proof Locking Mechanism Engages with 18 Pins for 

Strength 

■■Locking Mechanism is Easy to Operate – Push Button, Set and 

Release 






Durability 

1/4" Drive Indexible Head Ratchet 




1/4" Drive Ratchet Repair Kit 

Cat. No. UPC No. Packaging Description Fits Product Number Tooth Count Product Weight Shelf Pack Qty. 

10-963 781412109634 Bagged 1/4" Drive Ratchet Repair Kit 10-915 35 0.07 lb 1 

10-982 781412109825 Bagged 1/4" Drive Armstrong MAXX Ratchet Repair Kit 10-992, 10-994 60 0.10 lb 1 

10-983 781412109832 Bagged 1/4" Drive Indexible Ratchet Repair Kit 10-996 72 0.04 lb 1 

10-990 781412109900 Bagged 1/4" Drive Ratchet Repair Kit 10-972, 18-972 36 0.07 lb 1 

180


1/4" Drive Socket Spinner 



Manufacturing Process and Heat Treat for Greater Strength 

and Durability 


10-945 781412109450 Bagged 1.500 in 0.18 lb 1 






GGG-W-641E 

■■10-943 has 1/4" Female Drive in Handle for Driving with Ratchet 

1/4" Drive Plastic Handle Driver 

Cat. No. UPC No. Packaging Length Female Drive Size Product Weight Shelf Pack Qty. 

10-943 781412109436 Bagged 6.00 in 1/4" 0.22 lb 1 

10-944 781412109443 Bagged 6.00 in - 0.15 lb 1 

1/4" 





Improves Comfort 





GGG-W-641E 


10-918 781412109184 Bagged 5.750 in 0.16 lb 1 

1/4" Drive T-Handle 






GGG-W-641E 


10-938 781412109382 Bagged 5.000 in 0.12 lb 1 

3 


181




■■Maximum Operation Angle of 45 Degrees 

■■Unique Modified Ear Design Prevents Lock-Up at Extreme 

Angles, Allowing for Smooth, Continuous Operation 




■■Meets or Exceeds Aerospace Standard AS4283A-2004, ASME 



10-947 781412109474 Bagged 1.500 in 1/4" 1/4" 0.04 lb 1 

1/4" Drive Adapters 






GGG-W-641E 



10-952 781412109528 Bagged 1.138 in 1/4" 3/8" 0.06 lb 1 

10-952A 781412105292 Bagged 1.138 in 1/4" 3/8" 0.03 lb 1 

1/4" Drive Locking Adapter 

Cat. No. UPC No. Packaging Length Female Drive Size Male Drive Size Product Weight 

10-931 781412109313 Bagged 1.625 in 1/4" 1/4" 0.06 lb 

1/4" Drive Speeder Handle 









GGG-W-641E 


10-935 781412109351 Bulk with UPC 15.750 in 0.74 lb 1 

182


1/4" Drive Extensions 


■■Knurling on the Extension Shaft Provides a Non-Slip Grip 

to Quickly Run Down / Remove Fasteners 

■■No Knurling on "A" Suffix Part Numbers 


GGG-W-641E 


10-919A 781412109191 Bagged 1.500 in No 0.03 lb 1 

10-921 781412109214 Bagged 2.000 in No 0.06 lb 1 

10-922 781412109221 Bagged 4.000 in No 0.11 lb 1 


10-923 781412109238 Bagged 6.000 in No 0.14 lb 1 


10-924 781412109245 Bagged 10.000 in No 0.23 lb 1 

10-925 781412109252 Bagged 14.000 in No 0.32 lb 1 



GGG-W-641E 

1/4" Drive Flex Extension 

1/4" 


10-929 781412109290 Bagged 6.000 in No 0.09 lb 1 

3 







10-979 781412109795 Boxed 0.28 lb 1 


10-973 1/4" Drive Wobble Extension 2" 10-975 1/4" Drive Wobble Extension 6" 

10-974 1/4" Drive Wobble Extension 3" 


183








10-973 781412109733 Bagged 2.000 in Yes 0.06 lb 1 






■■Socket is Securely Locked to the Extension and Will Not 

Disengage Until Knurled Sleeve is Pulled, Safety and 

Convenience 



10-920 781412109207 Boxed 0.67 lb 1 



10-926 1/4" Drive Locking Extension 3" 10-928 1/4" Drive Locking Extension 15" 







Convenience 



10-926 781412109269 Bagged 3.000 in No 0.10 lb 1 

10-927 781412109276 Bagged 6.000 in No 0.20 lb 1 

10-928 781412109283 Bagged 15.000 in No 0.36 lb 1 

184






Fasteners 









GGG-W-641 E 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 

10-004D 781412100044 Bagged 6 Point 1/8 in 0.446 in 0.234 in 0.876 in 0.094 in 0.094 in 0.436 in 0.09 lb 1 






10-010 781412100105 Bagged 6 Point 5/16 in 0.463 in 0.463 in 0.876 in 0.208 in 0.290 in - 0.03 lb 1 




10-016D 781412100167 Bagged 6 Point 1/2 in 0.678 in 0.678 in 0.876 in 0.507 in 0.500 in - 0.05 lb 1 


10-106 781412101065 Bagged 12 Point 3/16 in 0.442 in 0.309 in 0.876 in 0.193 in 0.200 in 0.436 in 0.02 lb 1 










Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

1/4" 

3 


185



■■Meets or Exceeds Aerospace Standard AS954E-2004 




Fasteners 

■■Thinner Socket Wall Dimensions Provide Increased Access to 

Restricted Fasteners with No Loss in Socket Strength 

■■Bolt Clearance Holes Have Larger Diameters and Depths to 

Accommodate a Wider Variety of Fasteners 

■■Special Plating Process Prevents Corrosion Under the Harshest 

of Conditions 




1/4" Drive 12 Point SAE AS954 Standard Length 

Aerospace Sockets 


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 











GGG-W-641 E 


Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

1/4" Drive 6 Point SAE A Series Standard 


Dim. F: 

Length to 

Shoulder 

Cat. No. UPC No. Packaging Drive Type Fastener Size Product Weight Shelf Pack Qty. 

10-005A 781412105001 Boxed 6 Point 5/32 in 0.06 lb 5 





10-010AD 781412101003 Boxed 6 Point 5/16 in 0.08 lb 5 

10-011AD 781412111002 Boxed 6 Point 11/32 in 0.10 lb 5 




Shelf 

Pack Qty. 

186






Fasteners 











Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Cat. No. UPC No. 

Drive 

Type 

Fastener 

Size 

Dim. 

D: Bolt 

Product 

Weight 

37-004 781412370041 Bagged 6 Point 4 mm 0.445 in 0.276 in 0.878 in 0.146 in 0.161 in 0.437 in 0.02 lb 1 

37-081 781412370812 Bagged 6 Point 4.5 mm 0.453 in 0.311 in 0.874 in 0.185 in 0.181 in 0.437 in 0.02 lb 1 


37-083 781412370836 Bagged 6 Point 5.5 mm 0.445 in 0.343 in 0.878 in 0.161 in 0.197 in 0.437 in 0.03 lb 1 



37-008 781412370089 Bagged 6 Point 8 mm 0.465 in 0.465 in 0.878 in 0.209 in 0.291 in - 0.03 lb 1 

37-009D 781412370096 Bagged 6 Point 9 mm 0.504 in 0.504 in 0.878 in 0.209 in 0.311 in - 0.03 lb 1 








37-183 781412371833 Bagged 12 Point 5.5 mm 0.445 in 0.362 in 0.878 in 0.193 in 0.201 in - 0.05 lb 1 










Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

1/4" 

3 


187





1/4" Drive 6 Point Metric A Series Standard 




37-004A 781412374001 Bagged 6 Point 4 mm 0.03 lb 5 










188






Fasteners 









GGG-W-641 E 

1/4" Drive 6 and 12 Point SAE Deep Length Sockets 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 























Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

1/4" 

3 


189







Fasteners 






of Conditions 




1/4" Drive 12 Point SAE AS954 Deep Length 


Dim. B: 

Wrench 

End 

Cat. No. UPC No. Drive Type 

Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

36-208 781412362084 12 Point 1/4 in 0.435 in 0.374 in 2 in 0.24 in 0.25 in 0.83 in 0.05 lb 1 

36-210 781412362107 12 Point 5/16 in 0.446 in 0.446 in 2 in 0.28 in 0.65 in - 0.05 lb 1 

36-212 781412362121 12 Point 3/8 in 0.542 in 0.542 in 2 in 0.36 in 0.9 in - 0.07 lb 1 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 




GGG-W-641 E 


1/4" Drive 6 Point SAE A Series Deep Length Sockets 











190






Fasteners 









1/4" Drive 6 Point Metric Deep Length Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

37-204 781412372045 6 Point 4 mm 0.449 in 0.276 in 2.000 in 0.209 in 0.189 in 0.882 in 0.04 lb 1 

37-281 781412372816 6 Point 4.5 mm 0.449 in 0.315 in 2.000 in 0.209 in 0.295 in 0.890 in 0.05 lb 1 


37-283 781412372830 6 Point 5.5 mm 0.449 in 0.350 in 2.000 in 0.209 in 0.295 in 0.890 in 0.00 lb 1 



37-208 781412372083 6 Point 8 mm 0.445 in 0.445 in 2.000 in 0.197 in 0.650 in - 0.05 lb 1 








Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/4" 

3 


191





1/4" Drive 6 Point Metric A Series Deep 























■■10-406, 10-408 are 4 Point, 10-410, 10-412 are 8 Point 


GGG-W-641 E 



Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

10-406 781412104066 4 Point 3/16 in 0.446 in 0.382 in 0.876 in 0.200 in 0.200 in 0.436 in 0.03 lb 1 

10-408 781412104080 8 Point 1/4 in 0.463 in 0.463 in 0.876 in 0.240 in 0.280 in - 0.03 lb 1 



Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

192














Dim. A: 

Drive 

End 

Dim. B: 

Nose 

Diameter 

Dim. C: 

Overall 

Length 


Fastener 

Size 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 

10-703 781412107036 Bagged 0.050 in 0.500 in 0.500 in 1.875 in 1.312 in Yes 94-503 1.000 0.03 lb 1 

10-704 781412107043 Bagged 1/16 in 0.500 in 0.500 in 1.875 in 1.312 in Yes 94-504 1.000 0.04 lb 1 











37-703 781412377033 Bagged 2 mm 0.500 in 0.500 in 1.874 in 1.311 in Yes 94-603 1.000 0.04 lb 1 

37-704 781412377040 Bagged 2.5 mm 0.500 in 0.500 in 1.874 in 1.311 in Yes 94-604 1.000 0.05 lb 1 






Dim. 

D: Bit 

Length 

Exposed 

Bit 

Length 

Shelf 

Pack Qty. 

1/4" 

3 


193













1/4" Drive SAE Extra Long Hex Bit Sockets 


Dim. A: 

Drive 

End 

Dim. B: 

Nose 

Diameter 

Dim. C: 

Overall 

Length 


Fastener 

Size 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 

10-743 781412107432 Bagged 0.050 in 0.500 in 0.500 in 3.312 in 2.750 in Yes 94-543 2.438 0.05 lb 1 












Dim. 

D: Bit 

Length 













Dim. A: 

Drive 

End 

Dim. B: 

Nose 

Diameter 

Dim. C: 

Overall 

Length 

Exposed 

Bit 

Length 

Shelf 

Pack Qty. 


Fastener 

Size 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 

10-868 781412108682 Bagged T8 0.500 in 0.500 in 1.500 in 1.000 in Yes 94-168 0.641 in 0.03 lb 1 







Dim. 

D: Bit 

Length 

Exposed 

Bit 

Length 

Shelf 

Pack 

Qty. 

194













■■Meets or Exceeds US Federal Spec. GGG-W-001222 

1/4" Drive Slotted/Phillips Bit Sockets 

Dim. A: 

Drive 

End 

Dim. B: 

Nose 

Diameter 

Dim. C: 

Overall 

Length 


Fastener 

Size 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 



10-821 781412108217 Bagged Phil. #1 0.500 in 0.500 in 1.900 in 1.400 in Yes 94-121 1.046 0.05 lb 1 



Dim. 

D: Bit 

Length 

Exposed 

Bit 

Length 

Shelf 

Pack Qty. 

1/4" Drive Pear Head Ratchet 

■■Pear-Head Design 

■■72 Tooth Gear System Requires Only 5 Degree Swing 

■■Reversible 

■■Chrome Vanadium for Maximum Strength 

■■Meets ANSI Load Specs 


RD08BK 037103215932 Bagged 0.25 lb 5 

1/4" 

3 


195




Size Markings 









80550 099575805509 Boxed 12.13 lb 1 

RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 3 / 8 " 


81209F 3/8" Drive Stubby Ratchet 80375 3/8" Drive 6 Point Standard Metric Socket 7mm 
















80362 3/8" Drive 6 Point Standard SAE Socket 1" 80391 3/8" Drive 6 Point Deep Metric Socket 9mm 


80364 3/8" Drive 6 Point Deep SAE Socket 5/16" 80393D 3/8" Drive 6 Point Deep Metric Socket 11mm 









80373 3/8" Drive 6 Point Deep SAE Socket 7/8" 80549 3/8" Drive Universal Joint 


196




Size Markings 









80551 099575805516 Boxed 11.55 lb 1 


81209F 3/8" Drive Stubby Ratchet 80483 3/8" Drive 12 Point Standard Metric Socket 7mm 













80505 3/8" Drive 12 Point Standard SAE Socket 13/16" 80520D 3/8 Drive 12 Point Deep Metric Socket 6mm 

80506D 3/8" Drive 12 Point Standard SAE Socket 7/8" 80521 3/8 Drive 12 Point Deep Metric Socket 7mm 

80507 3/8" Drive 12 Point Standard SAE Socket 15/16" 80522 3/8 Drive 12 Point Deep Metric Socket 8mm 

80508 3/8" Drive 12 Point Standard SAE Socket 1" 80523 3/8 Drive 12 Point Deep Metric Socket 9mm 

80509 3/8 Drive 12 Point Deep SAE Socket 1/4" 80524 3/8 Drive 12 Point Deep Metric Socket 10mm 

80510D 3/8 Drive 12 Point Deep SAE Socket 5/16" 80525 3/8 Drive 12 Point Deep Metric Socket 11mm 





80515D 3/8 Drive 12 Point Deep SAE Socket 5/8" 80530 3/8 Drive 12 Point Deep Metric Socket 16mm 




80519 3/8 Drive 12 Point Deep SAE Socket 7/8" 80549 3/8" Drive Universal Joint 


3 / 8 " 

3 


197





Markings 



Rounding 






80550P 099575815508 Boxed 11.25 lb 1 



81211P 3/8" Drive 120XP Full Polish Teardrop Ratchet 80375 3/8" Drive 6 Point Standard Metric Socket 7mm 




























198




Size Markings 



■■Bit Sockets Feature Heat Treated Full Polish Chrome Base 







80567 099575805677 Boxed 10.34 lb 1 



80414 3/8" Drive Hex Bit Socket, 1/8" 80359 3/8" Drive 6 Point Standard SAE Socket 13/16" 



80418 3/8" Drive Hex Bit Socket, 7/32" 80362 3/8" Drive 6 Point Standard SAE Socket 1" 

80419 3/8" Drive Hex Bit Socket, 1/4" 80363 3/8" Drive 6 Point Deep SAE Socket 1/4" 



81221 3/8" Drive Full Polish Flex Handle/Breaker Bar - 12" 80366 3/8" Drive 6 Point Deep SAE Socket 7/16" 

81241 3/8" Drive Standard Extension 3" 80367 3/8" Drive 6 Point Deep SAE Socket 1/2" 







80354 3/8" Drive 6 Point Standard SAE Socket 1/2" 80592 3/8 Drive 6 Point Deep SAE Socket 15/16" 

80355 3/8" Drive 6 Point Standard SAE Socket 9/16" 80593 3/8 Drive 6 Point Deep SAE Socket 1" 



3 / 8 " 

3 


199




Size Markings 



■■Bit Sockets Feature Heat Treated Full Polish Chrome Base 







80566 099575805660 Boxed 10.31 lb 1 






80417 3/8" Drive Hex Bit Socket, 3/16" 80506D 3/8" Drive 12 Point Standard SAE Socket 7/8" 


80419 3/8" Drive Hex Bit Socket, 1/4" 80508 3/8" Drive 12 Point Standard SAE Socket 1" 

80420 3/8" Drive Hex Bit Socket, 5/16" 80509 3/8 Drive 12 Point Deep SAE Socket 1/4" 

80421 3/8" Drive Hex Bit Socket, 3/8" 80510D 3/8 Drive 12 Point Deep SAE Socket 5/16" 

81221 3/8" Drive Full Polish Flex Handle/Breaker Bar - 12" 80511 3/8 Drive 12 Point Deep SAE Socket 3/8" 

81241 3/8" Drive Standard Extension 3" 80512 3/8 Drive 12 Point Deep SAE Socket 7/16" 



80496 3/8" Drive 12 Point Standard SAE Socket 1/4" 80515D 3/8 Drive 12 Point Deep SAE Socket 5/8" 

80497D 3/8" Drive 12 Point Standard SAE Socket 5/16" 80516 3/8 Drive 12 Point Deep SAE Socket 11/16" 






200




Markings 




Rounding 





80569 099575805691 Boxed 2.31 lb 1 


81211F 3/8" Drive Full Polish Teardrop Ratchet 80362 3/8" Drive 6 Point Standard SAE Socket 1" 













80360 3/8" Drive 6 Point Standard SAE Socket 7/8" 80593 3/8 Drive 6 Point Deep SAE Socket 1" 


3 / 8 " 

3 


201




Markings 




Rounding 


30 Pc. 3/8" Drive 12 Point SAE Standard and 



80568 099575805684 Boxed 2.25 lb 1 





81242 3/8" Drive Standard Extension 6" 80510D 3/8 Drive 12 Point Deep SAE Socket 5/16" 





80500D 3/8" Drive 12 Point Standard SAE Socket 1/2" 80515D 3/8 Drive 12 Point Deep SAE Socket 5/8" 






80506D 3/8" Drive 12 Point Standard SAE Socket 7/8" 80595 3/8 Drive 12 Point Deep SAE Socket 1" 


202




Markings 




Rounding 





80559 099575805592 Boxed 5.50 lb 1 





80392 3/8" Drive 6 Point Deep Metric Socket 10mm 80487 3/8" Drive 12 Point Standard Metric Socket 11mm 

80393D 3/8" Drive 6 Point Deep Metric Socket 11mm 80488 3/8" Drive 12 Point Standard Metric Socket 12mm 








3 / 8 " 

3 


203




Markings 




Rounding 


21 Pc. 3/8" Drive 6 and 12 Point SAE Standard 



80557 099575805578 Boxed 5.30 lb 1 



81211F 3/8" Drive Full Polish Teardrop Ratchet 80373 3/8" Drive 6 Point Deep SAE Socket 7/8" 


81242 3/8" Drive Standard Extension 6" 80497D 3/8" Drive 12 Point Standard SAE Socket 5/16" 



80367 3/8" Drive 6 Point Deep SAE Socket 1/2" 80500D 3/8" Drive 12 Point Standard SAE Socket 1/2" 








Markings 




Rounding 



Tool Set 


80591 099575805912 Boxed 3.52 lb 1 












204




Markings 




Rounding 



Tool Set 


80590 099575805905 Boxed 3.49 lb 1 












3 / 8 " 

3 



Markings 




Rounding 




80589 099575805899 Boxed 3.70 lb 1 









80354 3/8" Drive 6 Point Standard SAE Socket 1/2" 80362 3/8" Drive 6 Point Standard SAE Socket 1" 


205




Markings 




Rounding 


16 Pc. 3/8" Drive 12 Point SAE Mechanics 

Tool Set 


80584 099575805844 Boxed 3.62 lb 1 










80500D 3/8" Drive 12 Point Standard SAE Socket 1/2" 80508 3/8" Drive 12 Point Standard SAE Socket 1" 



Markings 




Rounding 



Tool Set 


80558 099575805585 Boxed 2.95 lb 1 









206




Markings 




Rounding 




80556 099575805561 Boxed 3.17 lb 1 








3 / 8 " 

3 


207










and Deep Socket Set 


80718 099575807183 Boxed 6 Point 13.44 lb 1 



























80592 3/8 Drive 6 Point Deep SAE Socket 15/16" 80401 3/8" Drive 6 Point Deep Metric Socket 19mm 

80593 3/8 Drive 6 Point Deep SAE Socket 1" 80406 3/8 Drive 6 Point Deep Metric Socket 20mm 

80374 3/8" Drive 6 Point Standard Metric Socket 6mm 80407 3/8 Drive 6 Point Deep Metric Socket 21mm 






208









Socket Set 


















Socket Set 

3 / 8 " 

3 












209










11 Pc. 3/8" Drive 6 Point SAE Mid Length 

Socket Set 









80368S 3/8" Drive 6 Point Mid Length SAE Socket 9/16" 



















210










Socket Set 




80509 3/8 Drive 12 Point Deep SAE Socket 1/4" 80515D 3/8 Drive 12 Point Deep SAE Socket 5/8" 

80510D 3/8 Drive 12 Point Deep SAE Socket 5/16" 80516 3/8 Drive 12 Point Deep SAE Socket 11/16" 

80511 3/8 Drive 12 Point Deep SAE Socket 3/8" 80517 3/8 Drive 12 Point Deep SAE Socket 3/4" 












Socket Set 











3 / 8 " 

3 


211








■■Meets or Exceeds B107.5M 


Socket Set 




















14 Pc. 3/8" Drive 6 Point Metric Mid Length 

Socket Set 











212


















80393D 3/8" Drive 6 Point Deep Metric Socket 11mm 80400 3/8" Drive 6 Point Deep Metric Socket 18mm 

80394D 3/8" Drive 6 Point Deep Metric Socket 12mm 80401 3/8" Drive 6 Point Deep Metric Socket 19mm 









3 / 8 " 

3 




80520D 3/8 Drive 12 Point Deep Metric Socket 6mm 80527 3/8 Drive 12 Point Deep Metric Socket 13mm 

80521 3/8 Drive 12 Point Deep Metric Socket 7mm 80528 3/8 Drive 12 Point Deep Metric Socket 14mm 







213






80564 099575805646 Boxed 2.20 lb 1 









10 Pc. 3/8" Drive 6 Point Metric Flex Socket Set 


80565 099575805653 Boxed 2.20 lb 1 







214


■■Quickly Ratchet Nuts and Bolts Without Removing the Wrench 

From the Fastener 

■■Exceeds ASME Requirements for Torque Performance 

■■Size Laser Etched on Both Sides of Head for Easy Identification 


11 Pc. 3/8" Drive SAE Ratcheting Crowfoot 

Wrench Set 


89118 099575891182 Boxed 2.20 lb 1 


89120 3/8" Drive Ratcheting Crowfoot Wrench 3/8" 89126 3/8" Drive Ratcheting Crowfoot Wrench 3/4" 




89124 3/8" Drive Ratcheting Crowfoot Wrench 5/8" 89130 3/8" Drive Ratcheting Crowfoot Wrench 1" 

89125 3/8" Drive Ratcheting Crowfoot Wrench 11/16" 






10 Pc. 3/8" Drive Metric Ratcheting Crowfoot 

Wrench Set 


89119 099575891199 Boxed 1.30 lb 1 


89140 3/8" Drive Ratcheting Crowfoot Wrench 10mm 89145 3/8" Drive Ratcheting Crowfoot Wrench 15mm 





3 / 8 " 

3 


215


■■Premium Alloy CV Steel 

■■Includes Blow Mold Tray 

11 Pc. 3/8" Drive SAE Crowfoot Wrench Set 




81603 3/8" Drive Crowfoot Wrench 3/8" 81609 3/8" Drive Crowfoot Wrench 3/4" 


81605 3/8" Drive Crowfoot Wrench 1/2" 81611D 3/8" Drive Crowfoot Wrench 7/8" 


81607 3/8" Drive Crowfoot Wrench 5/8" 81613 3/8" Drive Crowfoot Wrench 1" 

81608 3/8" Drive Crowfoot Wrench 11/16" 




10 Pc. 3/8" Drive Metric Crowfoot Wrench Set 




81614 3/8" Drive Crowfoot Wrench 10mm 81619 3/8" Drive Crowfoot Wrench 15mm 





216







80581 099575805813 Carded 1.44 lb 1 


80410 3/8" Drive Hex Bit Socket, 1/16" 80414 3/8" Drive Hex Bit Socket, 1/8" 80418 3/8" Drive Hex Bit Socket, 7/32" 

80411 3/8" Drive Hex Bit Socket, 5/64" 80415D 3/8" Drive Hex Bit Socket, 9/64" 80419 3/8" Drive Hex Bit Socket, 1/4" 

80412D 3/8" Drive Hex Bit Socket, 3/32" 80416 3/8" Drive Hex Bit Socket, 5/32" 80420 3/8" Drive Hex Bit Socket, 5/16" 






3 / 8 " 


80580 099575805806 Carded 1.68 lb 1 


80422 3/8" Drive Hex Bit Socket, 2mm 80426 3/8" Drive Hex Bit Socket, 5mm 80430 3/8" Drive Hex Bit Socket, 9mm 

80423 3/8" Drive Hex Bit Socket, 2.5mm 80427 3/8" Drive Hex Bit Socket, 6mm 80431 3/8" Drive Hex Bit Socket, 10mm 

80424 3/8" Drive Hex Bit Socket, 3mm 80428D 3/8" Drive Hex Bit Socket, 7mm 80432 3/8" Drive Hex Bit Socket, 11mm 





7 Pc. 3/8" Drive SAE Hex Ball End Bit Socket Set 


80586 099575805868 Carded 1.00 lb 1 


80539 3/8" Drive Ball Hex Bit Socket, 1/8" 80542 3/8" Drive Ball Hex Bit Socket, 7/32" 80545 3/8" Drive Ball Hex Bit Socket, 3/8" 

80540 3/8" Drive Ball Hex Bit Socket, 5/32" 80543 3/8" Drive Ball Hex Bit Socket, 1/4" 

80541 3/8" Drive Ball Hex Bit Socket, 3/16" 80544 3/8" Drive Ball Hex Bit Socket, 5/16" 

3 


217





7 Pc. 3/8" Drive Metric Hex Ball End Bit 

Socket Set 


80587 099575805875 Carded 1.05 lb 1 


82500 3/8" Drive Ball Hex Bit Socket, 4mm 82503 3/8" Drive Ball Hex Bit Socket, 7mm 82506 3/8" Drive Ball Hex Bit Socket, 10mm 

82501 3/8" Drive Ball Hex Bit Socket, 5mm 82504 3/8" Drive Ball Hex Bit Socket, 8mm 

82502 3/8" Drive Ball Hex Bit Socket, 6mm 82505 3/8" Drive Ball Hex Bit Socket, 9mm 






8 Pc. 3/8" Drive Metric Hex Long Ball End Bit 

Socket Set 


80573 099575805738 Carded 1.59 lb 1 


80441 3/8" Drive Long Ball Hex Bit Socket, 3mm 80444 3/8" Drive Long Ball Hex Bit Socket, 6mm 80447 3/8" Drive Long Ball Hex Bit Socket, 9mm 

80442 3/8" Drive Long Ball Hex Bit Socket, 4mm 80445 3/8" Drive Long Ball Hex Bit Socket, 7mm 80448 3/8" Drive Long Ball Hex Bit Socket, 10mm 

80443 3/8" Drive Long Ball Hex Bit Socket, 5mm 80446 3/8" Drive Long Ball Hex Bit Socket, 8mm 





7 Pc. 3/8" Drive SAE Hex Long Ball End Bit 

Socket Set 


80574 099575805745 Carded 1.13 lb 1 


80434 3/8" Drive Long Ball Hex Bit Socket, 1/8" 80437 3/8" Drive Long Ball Hex Bit Socket, 7/32" 80440 3/8" Drive Long Ball Hex Bit Socket, 3/8" 

80435 3/8" Drive Long Ball Hex Bit Socket, 5/32" 80438 3/8" Drive Long Ball Hex Bit Socket, 1/4" 

80436D 3/8" Drive Long Ball Hex Bit Socket, 3/16" 80439 3/8" Drive Long Ball Hex Bit Socket, 5/16" 

218





7 Pc. 3/8" Drive Slotted/Phillips/Pozidriv® Bit 

Socket Set 


80577 099575805776 Carded 0.70 lb 1 


80467 3/8" Drive Screwdriver Bit Socket, #1 Phillips 80464 3/8" Drive Screwdriver Bit Socket, 4mm Slotted 



80470 3/8" Drive Screwdriver Bit Socket, #2 Pozidriv® 




3 Pc. 3/8" Drive Torx® Brake Bit Socket Set 

3 / 8 " 

3 


80571 099575805714 Carded 0.34 lb 1 


80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 80454 3/8" Drive TORX® Press-Fit Bit Socket, T-50 




3 Pc. 3/8" Drive SAE/Metric Hex Bit Socket Set 


80570 099575805707 Carded 0.30 lb 1 


80419 3/8" Drive Hex Bit Socket, 1/4" 80429 3/8" Drive Hex Bit Socket, 8mm 



219







3 Pc. 3/8" Drive Spark Plug Ratchet Set 


81229 099575812293 Carded 84 2.20 lb 1 


81213F 3/8" Drive Cushion Grip Offset Flex Handle Ratchet 80547 13/16" x 6" Swivel Spark Plug Socket 

80546 5/8" x 6" Swivel Spark Plug Socket 















Cat. No. UPC No. Packaging Overall Length No. of Positions Repair Kit Product Weight Shelf Pack Qty. 

81211P 099575822223 Carded 8.386 120 81227P 0.79 lb 1 

■■84 Tooth Flush Mounted On-Off Lever 


■■Full Polish Chrome Handle Ratchet 






■■84 Tooth Full Polish Chrome Handle Ratchet 


■■Teardrop Shaped Head Ratchet 






220







3/8" Drive Full Polish Stubby Teardrop Ratchet 








3/8" Drive Full Polish Stubby Flex 

Teardrop Ratchet 








3/8" Drive Full Polish Offset Flex Teardrop 

Ratchet 








3/8" Drive Quick-Release Teardrop Ratchet 








3/8" Drive Quick-Release Flex Teardrop Ratchet 

3 / 8 " 

3 




221



■■84 Tooth Teardrop Shaped Head 












3/8" Drive Cushion Grip Flex Teardrop Ratchet 









3/8" Drive Cushion Grip Offset Flex Teardrop 

Ratchet 



■■360 Degree Rotating Head for Speed and Access 

■■Round Shaped Head 




3/8" Drive Cushion Grip Roto Ratchet 



■■72 Tooth Gear for 5 Degree Ratchet Angle 



3/8" Drive Thumbwheel Ratchet 


81226 099575812262 Carded 72 0.25 lb 1 

222





81227F 099575822070 Bagged 

81227P 099575821271 Bagged 

3/8" Drive Non-Quick Release 

Ratchet Repair Kit 


Ratchet Repair Kit Dual Pawl 120XP 

81211, 81215, 81209, 81212, 81214, 

81211F, 81215F, 81209F, 81212F, 81214F 

Tooth 

Count 

No. of 

Positions 

Product 

Weight 

Shelf 

Pack Qty. 

84 - 0.08 lb 1 

81211P - 120 0.12 lb 1 


■■Ergonomic Handle 


3/8" Drive Full Polish Flex Handle / Breaker Bar 


81221 099575812217 Carded 12 in 0.85 lb 1 

3 / 8 " 




3 


80549 099575805493 Carded 2 in 3/8" 3/8" 0.15 lb 1 








81256 099575812569 Carded 2.375 in 3/8" 3/8" 0.15 lb 1 

223





81277 099575812774 Carded 1.00 in 3/8" 1/4" 0.40 lb 1 

81278 099575812781 Carded 1.44 in 3/8" 1/2" 0.11 lb 1 



3/8" Drive Magnetic Adapters 


Cat. No. UPC No. Packaging Female Drive Size Male Drive Size Product Weight Shelf Pack Qty. 

81259 099575812590 Carded 3/8" 1/4" 0.25 lb 1 

81260 099575812606 Carded 3/8" 1/2" 0.25 lb 1 

■■Surface Drive® Reduces Fastener Rounding 



3/8" Drive SAE Spark Plug Sockets 

Cat. No. UPC No. Packaging Description Product Weight Shelf Pack Qty. 

80402 099575804021 Carded 3/8" Drive Spark Plug Socket 5/8" 0.22 lb 1 

80403 099575804038 Carded 3/8" Drive Spark Plug Socket 13/16" 0.35 lb 1 

■■Surface Drive® Reduces Fastener Rounding 




3/8" Drive SAE Swivel Magnetic Spark 

Plug Sockets 

Dim. A: Drive End 

Hex Across Flats 

Dim. B: Nose 

Diameter 


Length 

Dim. E: 

Wrench Depth 





Product 

Weight 

Shelf Pack 

Qty. 

224




3/8" Drive Standard Extension 


81240 099575812408 Carded 1.5 in No 0.07 lb 1 

81241 099575812415 Carded 3 in No 0.15 lb 1 

81242 099575812422 Carded 6 in No 0.31 lb 1 

81243 099575812439 Carded 10 in No 0.51 lb 1 

81244 099575812446 Carded 12 in No 0.55 lb 1 


■■Spinner Handle Design for Ultra Fast Action 



81239 099575812392 Carded 16.75 in 1.55 lb 1 

3 / 8 " 



4 Pc. 3/8" Drive Extension Set 

3 


81200D 099575812002 Carded 1.32 lb 1 


81240 3/8" Drive Standard Extension 1.5" 81242 3/8" Drive Standard Extension 6" 









81262 099575812620 Carded 6 in No 0.32 lb 1 

225




3/8" Drive Wobble Extension 


81245 099575812453 Carded 1.5 in Yes 0.07 lb 1 






or as a Wobble Extension when Partially Inserted 






81201 099575812019 Carded 1.32 lb 1 







81250 099575812507 Carded 3 in No 0.15 lb 1 

81251 099575812514 Carded 6 in No 0.31 lb 1 

81272 099575812729 Carded 10 in No 0.51 lb 1 




81202 099575812026 Carded 1.10 lb 1 




226









3/8" Drive 6 and 12 Point SAE Standard Length 

Sockets 


Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 













80362 099575803628 Carded 6 Point 1 in 1.335 in 1.335 in 1.319 in 0.354 in 0.709 in 0.453 in 0.29 lb 1 














Product 

Weight 

Shelf 

Pack Qty. 

3 / 8 " 

3 


227









3/8" Drive 6 and 12 Point Metric Standard Length 

Sockets 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 



































Product 

Weight 

Shelf 

Pack Qty. 

228










3/8" Drive 6 Point SAE Mid Length Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80363S 099575823633 Carded 6 Point 1/4 in 0.66 in 0.39 in 1.81 in 0.18 in 0.35 in 1.02 in 0.07 lb 




80367S 099575823671 Carded 6 Point 1/2 in 0.74 in 0.74 in 1.81 in 0.43 in 0.83 in - 0.12 lb 
















3/8" Drive 6 Point Metric Mid Length Sockets 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80388S 099575823886 Carded 6 Point 6 mm 0.66 in 0.39 in 1.81 in 0.16 in 0.35 in 1.02 in 0.07 lb 






80394S 099575823947 Carded 6 Point 12 mm 0.70 in 0.70 in 1.81 in 0.39 in 0.83 in - 0.11 lb 








Product 

Weight 

Product 

Weight 

3 / 8 " 

3 


229













Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 



























Product 

Weight 

Shelf 

Pack Qty. 

230









3/8" Drive 6 and 12 Point Metric Deep 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

































Product 

Weight 

Shelf 

Pack Qty. 

3 / 8 " 

3 


231







Dim. A: Drive 

End 

Dim. B: 

Wrench End 


Length 

Dim. E: 

Wrench Depth 








Product 

Weight 

Shelf Pack 

Qty. 






3/8" Drive 6 Point Metric Flex Sockets 

Dim. A: Drive 

End 

Dim. B: 

Wrench End 


Length 

Dim. E: 

Wrench Depth 











Product 

Weight 

Shelf Pack 

Qty. 

232







3/8" Drive SAE Ratcheting Crowfoot Wrenches 

Cat. No. UPC No. Packaging Fastener Size End A Width End A Thickness End A Length Product Weight Shelf Pack Qty. 

89120 099575891205 Carded 3/8 in 0.909 in 0.224 in 1.378 in 0.04 lb 1 










89130 099575891304 Carded 1 in 2.087 in 0.476 in 2.441 in 0.32 lb 1 






3/8" Drive Metric Ratcheting Crowfoot Wrenches 


89140 099575891403 Carded 10 mm 0.909 in 0.224 in 1.378 in 0.04 lb 1 










3 / 8 " 

3 


233



3/8" Drive Metric Crowfoot Wrenches 


Cat. No. UPC No. Packaging Fastener Size End A Width 

End A 

Thickness End B Width Overall Length 













3/8" Drive SAE Crowfoot Wrenches 

End A 












81613 099575816130 Carded 1 in 2.203 in 0.393 in 1.337 in 2.518 in 0.29 lb 1 

Product 

Weight 

Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

234






Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 














80423 099575804236 Carded 2.5 mm 0.688 in 0.590 in 1.653 in 0.984 in 0.625 0.09 lb 1 





80428D 099575804281 Carded 7 mm 0.688 in 0.590 in 1.850 in 1.181 in 0.688 0.14 lb 1 






Product 

Weight 

Shelf Pack 

Qty. 

3 / 8 " 

3 


235




3/8" Drive SAE/Metric Ball End Hex Bit Sockets 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 















Product 

Weight 

Shelf Pack 

Qty. 

236




3/8" Drive SAE/Metric Long Ball End Hex 

Bit Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 


Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 



















Product 

Weight 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 



Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

3 / 8 " 

3 


237







Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 














Product 

Weight 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 





Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

238




3/8" Drive Torx® Long Bit Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Exposed Bit 

Length 




Product 

Weight 

Shelf Pack 

Qty. 



3 / 8 " 

3 


Dim. A: Drive 

End 

Dim. B: Nose 

Diameter 


Length 

Dim. D: Bolt 

Clearance 

80460 099575804601 Carded E10 0.750 in 0.750 in 1.240 in 0.196 in 0.12 lb 1 




3/8" Drive Bit Adapter 


■■Use 80481 5/16" Bit Holder Socket with 80477, 80478 and 80479 

Tamper Proof Torx® Bit 

Product 

Weight 

Shelf Pack 

Qty. 



Dim. A: Drive 

End 

Dim. B: Nose 

Diameter 


Length Replacement Bit Product Weight Shelf Pack Qty. 

80481 099575804816 Carded 0.750 in 0.750 in 1.240 in Yes 0.12 lb 1 

239




■■Use 80481 5/16" Bit Holder Socket with 80477, 80478 and 

80479D Tamper Proof Torx® Bits 

3/8" Drive Tamper-Proof Torx® 

Exchangeable Bits 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Replacement Bit 

80477 099575804779 Carded T40 0.688 in 0.590 in 1.181 in 1.181 in No 0.15 lb 1 

80478 099575804786 Carded T45 0.688 in 0.590 in 1.181 in 1.181 in No 0.17 lb 1 

80479D 099575804793 Carded T50 0.688 in 0.590 in 1.181 in 1.181 in No 0.19 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 



3/8" Drive Slotted/Phillips/Pozidriv® Bit Sockets 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed 

Bit Length 

80464 099575804649 Carded Slotted 4 mm 0.688 in 0.590 in 1.653 in 0.984 in 0.591 0.09 lb 1 



80467 099575804670 Carded Phillips® #1 0.688 in 0.590 in 1.653 in 0.984 in 0.591 0.09 lb 1 



80470 099575804700 Carded Pozidriv® #2 0.688 in 0.590 in 1.653 in 0.984 in 0.591 0.09 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

240



■■Molded, durable polypropylene box provides three levels of storage: 

tote, top tray, and tub 


providing SAE / metric differentiation 





■■Sockets incorporate a radius corner design that engages the 

flats of the fastener as well as a unique retention method, cold 

form ball recess, which provides consistent secure retention of 

the socket to the drive tool 




Deep Mechanics Tool Set (Tools Only or with Box) 


15-300 781412153002 16-600 Plastic Hand Box 25.40 lb 1 

15-305 781412153057 Boxed 20.45 lb 1 


16-600 16" Plastic Hand Box - Black 





























































3 / 8 " 

3 


241





































tool 






into the foam 











15-315 781412153156 Boxed 14.20 lb 1 





















242



































































56 Pc. 3/8" Drive 6 Point SAE/Metric Standard and 



15-299 781412152999 10.40 lb 1 

3 / 8 " 

3 






243
















11-032D 3/8" Drive 6 Point Standard Socket 1" 









































244








tool 






into the foam 







Mechanics Tool Set with Box 



44-305 781412443059 Boxed 17.47 lb 1 


11-972 3/8" Drive Teardrop Ratchet Polished Handle 7-3/8" 38-111 3/8" Drive 12 Point Standard Socket 11mm 

11-974 3/8" Drive Flex Head Teardrop Ratchet 38-112 3/8" Drive 12 Point Standard Socket 12mm 

11-935 3/8" Drive Speeder Handle with Polished Handle 38-113 3/8" Drive 12 Point Standard Socket 13mm 

11-938 3/8" Drive T-Handle 7" 38-114 3/8" Drive 12 Point Standard Socket 14mm 

11-943 3/8" Drive (Male/Female) Plastic Handle Driver 6" 38-115 3/8" Drive 12 Point Standard Socket 15mm 

11-952 3/8" Drive Adapter 3/8" F x 1/2" M 38-116 3/8" Drive 12 Point Standard Socket 16mm 

38-707 3/8" Drive Standard Length Hex Driver Socket 4mm Bit 38-117 3/8" Drive 12 Point Standard Socket 17mm 






38-715 3/8" Drive Standard Length Hex Driver Socket 10mm Bit 38-306 3/8" Drive 12 Point Deep Socket 6mm 

11-822 3/8" Drive Phillips Screwdriver Socket #2 38-307 3/8" Drive 12 Point Deep Socket 7mm 



11-802 3/8" Drive Screwdriver Socket 1/4" x 1/32" Tip 38-310 3/8" Drive 12 Point Deep Socket 10mm 

11-918 3/8" Drive Breaker Bar 8-1/2" 38-311 3/8" Drive 12 Point Deep Socket 11mm 




11-929 3/8" Drive Flex Extension 7-1/4" 38-315 3/8" Drive 12 Point Deep Socket 15mm 

11-945 3/8" Drive Ratchet Spinner 38-316 3/8" Drive 12 Point Deep Socket 16mm 






3 / 8 " 

3 


245








tool 






into the foam 



























246








tool 






into the foam 


























3 / 8 " 

3 


247








tool 






into the foam 













11-972 3/8" Drive Teardrop Ratchet Polished Handle 7-3/8" 11-028D 3/8" Drive 6 Point Standard Socket 7/8" 


11-923 3/8" Drive Extension 6" 11-214D 3/8" Drive 6 Point Deep Socket 7/16" 




11-018D 3/8" Drive 6 Point Standard Socket 9/16" 11-222D 3/8" Drive 6 Point Deep Socket 11/16" 





248








tool 






into the foam 












11-972 3/8" Drive Teardrop Ratchet Polished Handle 7-3/8" 11-128 3/8" Drive 12 Point Standard Socket 7/8" 








11-122 3/8" Drive 12 Point Standard Socket 11/16" 11-326D 3/8" Drive 12 Point Deep Socket 13/16" 



3 / 8 " 

3 


249







44-326A 781412443264 Metal Box 5.83 lb 1 



11-967A 3/8" Drive Teardrop Quick Release Ratchet Knurled Handle 7-1/2" 38-019 3/8" Drive 6 Point Standard Socket 19mm 

11-922A 3/8" Drive Extension 3" No Knurling 38-210 3/8" Drive 6 Point Deep Socket 10mm 

11-923A 3/8" Drive Extension 6" No Knurling 38-211 3/8" Drive 6 Point Deep Socket 11mm 







38-016 3/8" Drive 6 Point Standard Socket 16mm 38-319A 3/8" Drive 12 Point Deep Socket 19mm 

38-017 3/8" Drive 6 Point Standard Socket 17mm 11-501 3/8" Drive Spark Plug Socket with Rubber Insert 5/8" 







15-322A 781412153224 Metal Box 5.49 lb 1 


11-967A 3/8" Drive Teardrop Quick Release Ratchet Knurled Handle 7-1/2" 11-124A 3/8 Drive 12 Point Standard Socket 3/4" 



11-112A 3/8 Drive 12 Point Standard Socket 3/8" 11-316A 3/8" Drive 12 Point Deep Socket 1/2" 





11-122A 3/8 Drive 12 Point Standard Socket 11/16" 11-501 3/8" Drive Spark Plug Socket with Rubber Insert 5/8" 

250








tool 






into the foam 










11-935 3/8" Drive Speeder Handle with Polished Handle 38-111 3/8" Drive 12 Point Standard Socket 11mm 

11-918 3/8" Drive Breaker Bar 8-1/2" 38-112 3/8" Drive 12 Point Standard Socket 12mm 









3 / 8 " 

3 


251








tool 






into the foam 



















252








tool 






into the foam 












11-935 3/8" Drive Speeder Handle with Polished Handle 11-120 3/8" Drive 12 Point Standard Socket 5/8" 

11-918 3/8" Drive Breaker Bar 8-1/2" 11-122 3/8" Drive 12 Point Standard Socket 11/16" 






3 / 8 " 

3 


253








tool 






into the foam 


















254








tool 






into the foam 

















3 / 8 " 

3 





15-321A 781412153217 Metal Box 3.77 lb 1 


11-967A 3/8" Drive Teardrop Quick Release Ratchet Knurled Handle 7-1/2" 11-118A 3/8 Drive 12 Point Standard Socket 9/16" 



11-112A 3/8 Drive 12 Point Standard Socket 3/8" 11-124A 3/8 Drive 12 Point Standard Socket 3/4" 


11-116A 3/8 Drive 12 Point Standard Socket 1/2" 11-501 3/8" Drive Spark Plug Socket with Rubber Insert 5/8" 


255






Fasteners 









GGG-W-641E 



15-360 781412153606 Boxed 6 Point 1.97 lb 1 









11-116D 3/8" Drive 12 Point Standard Socket 1/2" 11-132 3/8" Drive 12 Point Standard Socket 1" 






Fasteners 









GGG-W-641E 

13 Pc. 3/8" Drive 6 Point SAE Socket Set with Plastic 

Socket Rail 


15-361 781412153613 Boxed 6 Point 1.90 lb 1 


16-838 15" Socket Rail Red Plastic 11-020D 3/8" Drive 6 Point Standard Socket 5/8" 

16-846 3/8" Drive Socket Clip 11-022 3/8" Drive 6 Point Standard Socket 11/16" 





11-016D 3/8" Drive 6 Point Standard Socket 1/2" 11-032D 3/8" Drive 6 Point Standard Socket 1" 


256






Fasteners 









GGG-W-641E 



15-355 781412153552 Boxed 12 Point 1.91 lb 1 










3 / 8 " 





Fasteners 









GGG-W-641E 



15-370 781412153705 Boxed 6 Point 1.34 lb 1 



16-843 3/8" Drive Socket Clips Steel 11-020D 3/8" Drive 6 Point Standard Socket 5/8" 





3 


257






Fasteners 









GGG-W-641E 



15-365 781412153651 Boxed 12 Point 2.30 lb 1 











GGG-W-641E 











258






Fasteners 








■■Black Oxide Industrial Finish Eliminates Chance of Foreign 

Object Damage and Contamination in Critical Environments 


GGG-W-641E 

13 Pc. 3/8" Drive 12 Point SAE Black Oxide Socket Set 


19-150 781412191509 Boxed 12 Point 3.86 lb 1 


16-834 13" Socket Rail Steel 19-120 3/8" Drive 12 Point Standard Socket 5/8" Black Oxide 

16-843 3/8" Drive Socket Clips Steel 19-122 3/8" Drive 12 Point Standard Socket 11/16" Black Oxide 

19-108 3/8" Drive 12 Point Standard Socket 1/4" Black Oxide 19-124 3/8" Drive 12 Point Standard Socket 3/4" Black Oxide 




19-116 3/8" Drive 12 Point Standard Socket 1/2" Black Oxide 19-132 3/8" Drive 12 Point Standard Socket 1" Black Oxide 

19-118 3/8" Drive 12 Point Standard Socket 9/16" Black Oxide 

3 / 8 " 





Fasteners 









GGG-W-641E 



15-380 781412153804 Boxed 6 Point 4.93 lb 1 



16-843 3/8" Drive Socket Clips Steel 11-222D 3/8" Drive 6 Point Deep Socket 11/16" 

11-208D 3/8" Drive 6 Point Deep Socket 1/4" 11-224 3/8" Drive 6 Point Deep Socket 3/4" 




11-216 3/8" Drive 6 Point Deep Socket 1/2" 11-232 3/8" Drive 6 Point Deep Socket 1" 


3 


259






Fasteners 









GGG-W-641E 



15-375 781412153750 Boxed 12 Point 4.95 lb 1 






11-310 3/8" Drive 12 Point Deep Socket 5/16" 11-326D 3/8" Drive 12 Point Deep Socket 13/16" 



11-316 3/8" Drive 12 Point Deep Socket 1/2" 11-332 3/8" Drive 12 Point Deep Socket 1" 






Fasteners 









GGG-W-641E 



15-390 781412153903 Boxed 6 Point 3.65 lb 1 




11-210D 3/8" Drive 6 Point Deep Socket 5/16" 11-222D 3/8" Drive 6 Point Deep Socket 11/16" 




260






Fasteners 









GGG-W-641E 



15-385 781412153859 Boxed 12 Point 2.26 lb 1 








3 / 8 " 



GGG-W-641E 


9 Pc. 3/8" Drive 12 Point SAE Deep A Series 

Socket Set 




11-312A 3/8" Drive 12 Point Deep Socket 3/8" 11-322A 3/8" Drive 12 Point Deep Socket 11/16" 





3 


261






Fasteners 








Durability 


GGG-W-641E 



15-395 781412153958 Boxed 8 Point 0.94 lb 1 











Fasteners 











44-335 781412443356 Boxed 6 Point 2.64 lb 1 



16-843 3/8" Drive Socket Clips Steel 38-016 3/8" Drive 6 Point Standard Socket 16mm 


38-007D 3/8" Drive 6 Point Standard Socket 7mm 38-018 3/8" Drive 6 Point Standard Socket 18mm 





38-012D 3/8" Drive 6 Point Standard Socket 12mm 38-023D 3/8" Drive 6 Point Standard Socket 23mm 



262






Fasteners 











44-330 781412443301 Boxed 12 Point 2.62 lb 1 













3 / 8 " 

3 

13 Pc. 3/8" Drive 12 Point Metric A Series Socket Set 















263






Fasteners 











44-345 781412443455 Boxed 6 Point 1.42 lb 1 














Fasteners 









12 Pc. 3/8" Drive 6 Point Metric Socket Set with 

Plastic Socket Rail 


44-346 781412443462 Boxed 6 Point 1.30 lb 1 


16-839 15" Socket Rail Blue Plastic 38-013 3/8" Drive 6 Point Standard Socket 13mm 

16-846 3/8" Drive Socket Clip 38-014 3/8" Drive 6 Point Standard Socket 14mm 






264






Fasteners 











44-340 781412443400 Boxed 12 Point 1.30 lb 1 









3 / 8 " 





Fasteners 











44-355 781412443554 Boxed 6 Point 2.12 lb 1 












3 


265






Fasteners 











44-350 781412443509 Boxed 12 Point 2.07 lb 1 

















Fasteners 











44-365 781412443653 Boxed 6 Point 2.12 lb 1 









266






Fasteners 











44-360 781412443608 Boxed 12 Point 2.07 lb 1 









3 / 8 " 



Angles, Allowing for Smooth, Continuous Operation. 




Fasteners 







GGG-W-641 E 



15-400 781412154009 Boxed 1.30 lb 1 


16-831 9" Socket Rail Steel 11-518 3/8" Drive 12-Point Universal Joint 9/16" 

16-843 3/8" Drive Socket Clips Steel 11-520 3/8" Drive 12-Point Universal Joint 5/8" 

11-512D 3/8" Drive 12-Point Universal Joint 3/8" 11-522 3/8" Drive 12-Point Universal Joint 11/16" 

11-514 3/8" Drive 12-Point Universal Joint 7/16" 11-524 3/8" Drive 12-Point Universal Joint 3/4" 


3 


267




■■Crowfoot Wrenches Provide Access to Hard-To-Reach Fasteners 

and Fittings By Attaching Them to a Drive Tool 

■■Open End Crow Foot Wrenches Have a Thinner Head and are 

Used to Grip Hard to Reach Fasteners and Fittings 

■■Full Polish Chrome Finish Provides Smooth Edges with a High 

Luster 



Durability 


GGG-E-1507B 


15-405 781412154054 Boxed 1.26 lb 1 


11-850 3/8" Drive Crowfoot Wrench 3/8" 11-856 3/8" Drive Crowfoot Wrench 3/4" 



11-853 3/8" Drive Crowfoot Wrench 9/16" 16-832 11" Socket Rail Steel 

11-854 3/8" Drive Crowfoot Wrench 5/8" 16-843 3/8" Drive Socket Clips Steel 









Luster 



Durability 



44-370 781412443707 Boxed 1.60 lb 1 


38-850 3/8" Drive Crowfoot Wrench 10mm 38-857 3/8" Drive Crowfoot Wrench 17mm 





38-855 3/8" Drive Crowfoot Wrench 15mm 16-835 17" Socket Rail Steel 

38-856 3/8" Drive Crowfoot Wrench 16mm 16-843 3/8" Drive Socket Clips Steel 

268


8 Pc. 3/8" Drive SAE Flare Nut Crowfoot Wrench Set 




■■Flare Nut Crow Foot Wrenches are Used to Grip Hard to Reach 

Fittings in a Closed System Such As Hydraulic Lines, Fuel Lines, 

or Air Line Applications 


Luster 



Durability 


GGG-E-1507B 


15-415 781412154153 Boxed 1.40 lb 1 


11-842 3/8" Drive Flare Nut Crowfoot Wrench 5/8" 11-847 3/8" Drive Flare Nut Crowfoot Wrench 15/16" 

11-843 3/8" Drive Flare Nut Crowfoot Wrench 11/16" 11-848 3/8" Drive Flare Nut Crowfoot Wrench 1" 

11-844 3/8" Drive Flare Nut Crowfoot Wrench 3/4" 11-849 3/8" Drive Flare Nut Crowfoot Wrench 1-1/16" 

11-845 3/8" Drive Flare Nut Crowfoot Wrench 13/16" 16-832 11" Socket Rail Steel 

11-846 3/8" Drive Flare Nut Crowfoot Wrench 7/8" 16-843 3/8" Drive Socket Clips Steel 















15-440 781412154405 Boxed 0.69 lb 1 







3 / 8 " 

3 


269
















44-385 781412443851 Boxed 1.20 lb 1 


16-831 9" Socket Rail Steel 38-712 3/8" Drive Standard Length Hex Driver Socket 7mm Bit 

16-843 3/8" Drive Socket Clips Steel 38-713 3/8" Drive Standard Length Hex Driver Socket 8mm Bit 



















15-425 781412154252 Boxed 1.03 lb 1 







270














7 Pc. 3/8" Drive Metric Extra Long Hex Bit Socket Set 


44-375 781412443752 Boxed 1.40 lb 1 


16-831 9" Socket Rail Steel 38-751 3/8" Drive Extra Long Hex Driver Socket 6mm Bit 

16-843 3/8" Drive Socket Clips Steel 38-752 3/8" Drive Extra Long Hex Driver Socket 7mm Bit 

38-747 3/8" Drive Extra Long Hex Driver Socket 4mm Bit 38-753 3/8" Drive Extra Long Hex Driver Socket 8mm Bit 

38-749 3/8" Drive Extra Long Hex Driver Socket 5mm Bit 38-755 3/8" Drive Extra Long Hex Driver Socket 10mm Bit 

3 / 8 " 















15-445 781412154450 Boxed 1.15 lb 1 


16-831 9" Socket Rail Steel 11-878D 3/8" Drive Standard Length Torx Driver Socket T27 





3 


271
















15-450 781412154504 Boxed 0.83 lb 1 



16-843 3/8" Drive Socket Clips Steel 11-878D 3/8" Drive Standard Length Torx Driver Socket T27 




7 Pc. 3/8" Drive Slotted/Phillips Bit Socket Set 














15-455 781412154559 Boxed 1.20 lb 1 


16-831 9" Socket Rail Steel 11-828 3/8" Drive Phillips Screwdriver Socket #4 

16-843 3/8" Drive Socket Clips Steel 11-802 3/8" Drive Screwdriver Socket 1/4" x 1/32" Tip 

11-821 3/8" Drive Phillips Screwdriver Socket #1 11-803 3/8" Drive Screwdriver Socket 5/16" x 3/64" Tip 



272





■■Recessed Reversing Lever Has As On/Off Markings for Safety 







W-641E 



3/8" Drive Long Handle Teardrop Ratchet 


■■Longer Handle Generates Additional Torque with Less Effort 







Durability 


W-641E 



3 / 8 " 

3 

3/8" Drive Flex Head Teardrop Ratchet 


■■Flex Head for Multi-Angle, Multi-Application Use 








W-641E 




273


3/8" Drive Plastic Handle Teardrop Ratchets 


■■Plastic Handle for Comfort When a Larger Grip is Required 


■■Recessed Reversing Lever has On/Off Markings for Safety 




W-641E 















W-641E 
















11-992 781412119923 Bagged 7.800 in 1.230 in 0.477 in 88 0.71 lb 1 

274





Position for Multi-Angle, Multi-Application Use Regardless of 

Load 








W-641E 






W-641E 

3 / 8 " 



3 




W-641E 





W-641E 

3/8" Drive Quick Release Teardrop Flex Ratchet 




275








Durability 


Head 

Product Shelf Pack 

Cat. No. UPC No. Packaging Overall Length Head Width Thickness Tooth Count Repair Kit Weight 

Qty. 












Strength 


Release 






Durability 








Durability 


11-945 781412119459 Bagged 1.500 in 0.16 lb 1 

276



3/8" Ratchet Repair Kit 



11-990 781412119909 Bagged 3/8" Drive Ratchet Repair Kit 

11-972, 11-973, 11-978, 

11-979, 19-972 

36 0.16 lb 1 


3/8" Drive (Male/Female) Plastic Handle Driver 




Durability 


W-641E 


11-943 781412119435 Bagged 6.000 in 0.28 lb 1 








Durability 

■■11-918A Has Knurled Handle 


W-641E 


11-918 781412119183 Bagged 8.500 in 0.51 lb 1 

11-918A 781412119817 Bagged 9.500 in 0.77 lb 1 







Durability 


W-641E 

3/8" Drive Black Oxide Flex Handle / Breaker Bar 

3 / 8 " 

3 



19-918 781412199185 Bagged 8.500 in 0.49 lb 1 

277






Durability 


W-641E 


11-938 781412119381 Bagged 7.000 in 0.32 lb 1 








Durability 


B107.10M, AS4283A-2004 and US Federal Spec. GGG-W-641E 



11-947 781412119473 Bagged 2.000 in 3/8" 3/8" 0.13 lb 1 





Durability 


W-641E 


11-951 781412119510 Bagged 1.015 in 3/8" 1/4" 0.06 lb 1 

11-952 781412119527 Bagged 1.375 in 3/8" 1/2" 0.13 lb 1 

11-952A 781412115291 Bagged 1.375 in 3/8" 1/2" 0.09 lb 1 

3/8" Drive Locking Adapter 

■■Permits Socket to be Securely Locked to Drive Tool Square 


W-641e 

Cat. No. UPC No. Packaging Length Female Drive Size Male Drive Size Product Weight Shelf Pack Qty. 

11-931 781412119312 Bagged 2.125 in 3/8" 3/8" 0.08 lb 1 

278









Durability 

■■11-935A Has a Knurled Handle 

■■Meets or Exceeds Aerospace Standard AS4283A-2004 (11-935), 

ASME B107.10M and US Federal Spec. GGG-W-641E 


11-935 781412119350 Bagged 17.500 in 1.10 lb 1 

11-935A 781412113594 Bagged 16.750 in 1.00 lb 1 





■■No Knurling on A Suffix Extensions 


W-641E 


11-921 781412119213 Bagged 1.500 in No 0.08 lb 1 


11-922 781412119220 Bagged 3.000 in No 0.13 lb 1 


11-923 781412119237 Bagged 6.000 in No 0.21 lb 1 


11-925 781412119251 Bagged 8.000 in No 0.35 lb 1 


11-927 781412119275 Bagged 12.000 in No 0.40 lb 1 

11-928 781412119282 Bagged 20.000 in No 0.64 lb 1 

3/8" Drive Flex Extension 



W-641E 


11-929 781412119299 Bagged 7.250 in No 0.23 lb 1 

3 / 8 " 

3 


279








11-959 781412119596 Boxed 3.07 lb 1 


11-953 3/8" Drive Wobble Extension 1-3/4" 11-956 3/8" Drive Wobble Extension 8" 

11-954 3/8" Drive Wobble Extension 3" 11-957 3/8" Drive Wobble Extension 12" 




















Convenience 



11-920 781412119206 Boxed 1.88 lb 1 




280







Convenience 



11-934 781412119343 Bagged 3.000 in No 0.20 lb 1 

11-936 781412119367 Bagged 6.000 in No 0.37 lb 1 

11-937 781412119374 Bagged 8.000 in No 0.49 lb 1 

11-939 781412119398 Bagged 12.000 in No 0.73 lb 1 





Fasteners 









GGG-W-641 E 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 














11-032D 781412110326 Bagged 6 Point 1 in 1.310 in 1.310 in 1.378 in 0.980 in 0.800 in - 0.28 lb 1 






Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

3 / 8 " 

3 


281


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 










11-132 781412111323 Bagged 12 Point 1 in 1.310 in 1.310 in 1.378 in 0.980 in 0.800 in - 0.28 lb 1 

Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 



■■Meets or Exceeds Aerospace Standard ASME AS954E-2004 




Fasteners 






of Conditions 




3/8" Drive 12 Point SAE AS954 Standard Length 


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Product 

Weight 










36-330 781412363302 Bagged 12 Point 15/16 in 1.244 in 1.244 in 1.76 in 1.188 in - 0.24 lb 1 


Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

282




GGG-W-641 E 


3/8" Drive 12 Point SAE A Series Standard 














3 / 8 " 

3 


283






Fasteners 











GGG-W-641 E 

3/8" Drive 12 Point SAE Black Oxide Standard 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 














Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

284






Fasteners 












Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 


38-007D 781412380071 Bagged 6 Point 7 mm 0.657 in 0.413 in 0.937 in 0.169 in 0.165 in 0.437 in 0.04 lb 1 

















38-026 781412380262 Bagged 6 Point 26 mm 1.315 in 1.315 in 1.500 in - 0.701 in - 0.36 lb 1 















Product 

Weight 

Shelf 

Pack Qty. 

3 / 8 " 

3 


285



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 






Product 

Weight 

Shelf 

Pack Qty. 








38-107A 781412381702 Boxed 12 Point 7 mm 0.04 lb 5 














286






Fasteners 









GGG-W-641 E 


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Product 

Weight 





























Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

3 / 8 " 

3 


287



■■Meets or Exceeds Aerospace Standard ASME AS954E-2004 




Fasteners 






of Conditions 









GGG-W-641 E 


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 







36-424 781412364248 Bagged 12 Point 3/4 in 1 in 1 in 2.5 in 0.73 in 1.377 in - 0.24 lb 1 

3/8" Drive 12 Point SAE A Series Deep 



Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 










Shelf 

Pack Qty. 

288






Fasteners 











GGG-W-641 E 

3/8" Drive 12 Point SAE Black Oxide Deep 


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 














Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

3 / 8 " 

3 


289






Fasteners 









3/8" Drive 6 and 12 Point Metric Deep Length Sockets 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 



































Product 

Weight 

Shelf 

Pack Qty. 

290



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





Product 

Weight 

Shelf 

Pack Qty. 




3/8" Drive 12 Point Metric A Series Deep 














3 / 8 " 

3 


291












Durability 


GGG-W-641 E 

3/8" Drive 8 Point SAE Standard Length Sockets 


Dim. A: 

Drive 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 













Durability 

■■Meets or Exceeds US Federal Spec. GGG-W-641 E 

Dim. B: 

Wrench 

End 



Dim. A: Drive End 

Hex Across Flats 

Dim. B: Nose 

Diameter 


Length 

Dim. E: 

Wrench Depth 

Product 

Weight 

Shelf Pack 

Qty. 

11-501 781412115017 Bagged 5/8 in 3/4 in 0.873 in 2.345 in 0.605 in 0.21 lb 1 


Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

292








Fasteners 







GGG-W-641 E 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

11-512D 781412115123 Bagged 3/8 in 0.750 in 0.597 in 1.680 in 0.334 in 0.330 in 0.220 in 0.07 lb 1 

11-514 781412115147 Bagged 7/16 in 0.750 in 0.640 in 1.680 in 0.334 in 0.330 in 0.220 in 0.09 lb 1 






Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

3 / 8 " 







Fasteners 









GGG-W-641 E 

3/8" Drive 12 Point SAE Black Oxide Flex Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 








Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

3 


293






Used to Grip Hard to Reach Fasteners and Fittings. 


Luster 



Durability 

■■Meets or Exceeds ASME B107.21 and US Federal Specification 

GGG-C-1507b 

3/8" Drive SAE Flare Nut Crowfoot Wrenches 



End A 

Fastener 

Size End A Width 

End A 

Thickness End B Width 

End B 

Thickness Slot Width 

Product 

Weight 

Shelf Pack 

Qty. 

11-842 781412118421 Bagged 5/8 in 0.969 in 0.719 in 0.641 in 0.391 in 0.443 in 0.10 lb 1 






11-848 781412118483 Bagged 1 in 1.485 in 0.812 in 0.641 in 0.391 in 0.713 in 0.16 lb 1 

11-849 781412118490 Bagged 1-1/16 in 1.563 in 0.812 in 0.641 in 0.391 in 0.792 in 0.13 lb 1 




■■Open End Crow Foot Wrenches Have a Thinner Head and Are 



Luster 



Durability 

■■Meets or Exceeds ASME B107.21 and US Federal Spec. GGG- 

W-1507b 



End A 

Fastener Size End A Width 

End A 


End B 

Thickness 

Product 

Weight 

Shelf Pack 

Qty. 

11-850 781412118506 Bagged 3/8 in 0.750 in 0.220 in 0.630 in 0.440 in 0.06 lb 1 










11-860 781412118605 Bagged 1 in 2.030 in 0.370 in 0.630 in 0.440 in 0.24 lb 1 

294








Luster 



Durability 



End A 


End A 


End B 

Thickness 

Product 

Weight 

Shelf Pack 

Qty. 

38-850 781412388503 Bagged 10 mm 0.811 in 0.220 in 0.630 in 0.441 in 0.04 lb 1 












3 / 8 " 

3 


295












■■Broached Hex in the Bit Holder Allows Higher Torque Loads. Bits 

Press Fit on "A" Suffix Bit Sockets 

■■EYE-D Markings Optimize Size Visibility - No EYE-D 

Markings on "A" Suffix Bit Sockets 



Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 

11-708 781412117080 Bagged 1/8 in 0.675 in 0.531 in 2.780 in 2.000 in Yes 94-108 0.08 lb 1 








38-705 781412387056 Bagged 3 mm 0.677 in 0.531 in 2.795 in 2.000 in Yes 94-305 0.08 lb 1 








11-708A 781412117806 Bagged 1/8 in - - - - Yes - 0.08 lb 1 

11-709A 781412117905 Bagged 9/64 in - - - - No - 0.08 lb 1 







38-704A 781412387049 Bagged 2.5 mm - - - - No - 0.08 lb 1 

38-705A 781412387506 Bagged 3 mm - - - - No - 0.08 lb 1 






Dim. C: 

Overall 

Length 

Shelf Pack 

Qty. 

296














3/8" Drive SAE/Metric Long Hex Bit Sockets 

Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Replaceable 

Bit? Replacement Bit 

Product 

Weight 















Dim. C: 

Overall 

Length 

Shelf Pack 

Qty. 

3 / 8 " 

3 


297
















Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 

11-870 781412118704 Bagged T10 0.675 in 0.600 in 1.650 in 1.000 in Yes 94-170 0.06 lb 1 




11-878D 781412118780 Bagged T27 0.675 in 0.600 in 1.650 in 1.000 in Yes 94-178 0.09 lb 1 



















Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 




11-821 781412118216 Bagged Phil. #1 0.700 in 0.700 in 2.050 in 1.400 in Yes 94-121 0.12 lb 1 




Dim. C: 

Overall 

Length 

Dim. C: 

Overall 

Length 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

298


■■World Famous Crescent® Brand 

■■Providing Quality Tools Since 1907 

■■Professional Quality, Cr-V Steel 




CTK30SET 037103202673 6.20 lb 


- 3/8" Drive, 72-Tooth Quick-release Ratchet Drive 1 - 3/8" Drive, 13/16" Spark Plug Socket 2 



3/8" Drive, 12-Point Sockets: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 

9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm 

3/8" Drive, 12-Point Deep Sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 12mm, 

13mm, 14mm, 16mm, 17mm 

16 

10 

3 / 8 " 








RD12BK 037103215949 Bagged 0.75 lb 5 

3 


299




Markings 




Rounding 





80700D 099575807008 Boxed 9.09 lb 1 















80611 1/2" Drive 6 Point Standard SAE Socket 1" 80636D 1/2" Drive 6 Point Standard Metric Socket 24mm 

80612 1/2" Drive 6 Point Standard SAE Socket 1-1/16" 80637 1/2" Drive 6 Point Deep Metric Socket 10mm 










80622 1/2" Drive 6 Point Standard Metric Socket 10mm 80600D 1/2" Drive Universal Joint 


300




Markings 




Rounding 





80701 099575807015 Boxed 9.09 lb 1 














80769 1/2" Drive 12 Point Standard SAE Socket 1" 80759 1/2" Drive 12 Point Standard Metric Socket 24mm 













1/2" 

3 


301





Markings 



Rounding 






80700P 099575810701 10.05 lb 



81304P 1/2" Drive 120XP Full Polish Teardrop Ratchet 80624 1/2" Drive 6 Point Standard Metric Socket 12mm 












80611 1/2" Drive 6 Point Standard SAE Socket 1" 80636D 1/2" Drive 6 Point Standard Metric Socket 24mm 













302




Markings 




Rounding 





80715 099575807152 Boxed 8.55 lb 1 


81304F 1/2" Drive Full Polish Teardrop Ratchet 80679 1/2" Drive 6 Point Standard SAE Socket 1-1/2" 

81307 1/2" Drive Full Polish Flex Handle 15" 80684 1/2" Drive 6 Point Deep SAE Socket 7/16" 









80608 1/2" Drive 6 Point Standard SAE Socket 13/16" 80674 1/2" Drive 6 Point Deep SAE Socket 1" 

80609 1/2" Drive 6 Point Standard SAE Socket 7/8" 80675 1/2" Drive 6 Point Deep SAE Socket 1-1/16" 

80610D 1/2" Drive 6 Point Standard SAE Socket 15/16" 80676 1/2" Drive 6 Point Deep SAE Socket 1-1/8" 

80611 1/2" Drive 6 Point Standard SAE Socket 1" 80685 1/2" Drive 6 Point Deep SAE Socket 1-1/4" 

80612 1/2" Drive 6 Point Standard SAE Socket 1-1/16" 80686 1/2" Drive 6 Point Deep SAE Socket 1-1/2" 

80613 1/2" Drive 6 Point Standard SAE Socket 1-1/8" 80600D 1/2" Drive Universal Joint 


1/2" 

3 


303




Markings 




Rounding 





80714D 099575807145 Boxed 6.69 lb 1 



81304F 1/2" Drive Full Polish Teardrop Ratchet 80680 1/2" Drive 12 Point Standard SAE Socket 1-1/2" 

81307 1/2" Drive Full Polish Flex Handle 15" 80772 1/2" Drive 12 Point Deep SAE Socket 7/16" 









80766 1/2" Drive 12 Point Standard SAE Socket 13/16" 80795 1/2" Drive 12 Point Deep SAE Socket 1" 



80769 1/2" Drive 12 Point Standard SAE Socket 1" 80798 1/2" Drive 12 Point Deep Socket 1-1/4" 


80771 1/2" Drive 12 Point Standard SAE Socket 1-1/8" 80600D 1/2" Drive Universal Joint 


304




Markings 




Rounding 





80707 099575807077 Boxed 5.50 lb 1 



81341 1/2" Drive Standard Extension 5" 80612 1/2" Drive 6 Point Standard SAE Socket 1-1/16" 

81343 1/2" Drive Standard Extension 15" 80613 1/2" Drive 6 Point Standard SAE Socket 1-1/8" 










1/2" 

3 


305




Markings 




Rounding 





80709 099575807091 Boxed 6.50 lb 1 












80643 1/2" Drive 6 Point Deep Metric Socket 16mm 80755D 1/2" Drive 12 Point Standard Metric Socket 20mm 





306




Markings 




Rounding 




80717 099575807176 Boxed 3.95 lb 1 



81307 1/2" Drive Full Polish Flex Handle 15" 80609 1/2" Drive 6 Point Standard SAE Socket 7/8" 

81341 1/2" Drive Standard Extension 5" 80610D 1/2" Drive 6 Point Standard SAE Socket 15/16" 


80603 1/2" Drive 6 Point Standard SAE Socket 1/2" 80612 1/2" Drive 6 Point Standard SAE Socket 1-1/16" 




80607D 1/2" Drive 6 Point Standard SAE Socket 3/4" 80600D 1/2" Drive Universal Joint 

1/2" 



Markings 




Rounding 




80716 099575807169 Boxed 3.95 lb 1 



81307 1/2" Drive Full Polish Flex Handle 15" 80767 1/2" Drive 12 Point Standard SAE Socket 7/8" 







80765 1/2" Drive 12 Point Standard SAE Socket 3/4" 80600D 1/2" Drive Universal Joint 

3 


307




Markings 




Rounding 




80706 099575807060 Boxed 5.80 lb 1 



81304F 1/2" Drive Full Polish Teardrop Ratchet 80607D 1/2" Drive 6 Point Standard SAE Socket 3/4" 










Markings 




Rounding 



Tool Set 


80708 099575807084 Boxed 7.97 lb 1 









80626D 1/2" Drive 6 Point Standard Metric Socket 14mm 80635 1/2" Drive 6 Point Standard Metric Socket 23mm 


308










Socket Set 


80729 099575807299 Boxed 6 Point 12.31 lb 1 










80610D 1/2" Drive 6 Point Standard SAE Socket 15/16" 80674 1/2" Drive 6 Point Deep SAE Socket 1" 

80611 1/2" Drive 6 Point Standard SAE Socket 1" 80675 1/2" Drive 6 Point Deep SAE Socket 1-1/16" 





1/2" 

3 


309









37 Pc. 1/2" Drive 12 Point Metric Standard and 

Deep Socket Set 


80730 099575807305 Boxed 12 Point 13.80 lb 1 







80748D 1/2" Drive 12 Point Standard Metric Socket 13mm 80815D 1/2" Drive 12 Point Standard Metric Socket 36mm 







80755D 1/2" Drive 12 Point Standard Metric Socket 20mm 80817D 1/2" Drive 12 Point Deep Metric Socket 20mm 








310











80731 099575807312 Boxed 12 Point 4.98 lb 1 










1/2" 
















80607D 1/2" Drive 6 Point Standard SAE Socket 3/4" 80613 1/2" Drive 6 Point Standard SAE Socket 1-1/8" 


3 


311





























80733 099575807336 Boxed 6 Point 8.74 lb 1 




80615 1/2" Drive 6 Point Deep SAE Socket 9/16" 80674 1/2" Drive 6 Point Deep SAE Socket 1" 

80616 1/2" Drive 6 Point Deep SAE Socket 5/8" 80675 1/2" Drive 6 Point Deep SAE Socket 1-1/16" 




312











80732 099575807329 Boxed 12 Point 8.74 lb 1 




80774 1/2" Drive 12 Point Deep SAE Socket 9/16" 80795 1/2" Drive 12 Point Deep SAE Socket 1" 



80777D 1/2" Drive 12 Point Deep SAE Socket 3/4" 80798 1/2" Drive 12 Point Deep Socket 1-1/4" 

















1/2" 

3 


313































80626D 1/2" Drive 6 Point Standard Metric Socket 14mm 80633 1/2" Drive 6 Point Standard Metric Socket 21mm 





314














80748D 1/2" Drive 12 Point Standard Metric Socket 13mm 80755D 1/2" Drive 12 Point Standard Metric Socket 20mm 














1/2" 

3 








80641 1/2" Drive 6 Point Deep Metric Socket 14mm 80646D 1/2" Drive 6 Point Deep Metric Socket 19mm 


315























80721 099575807213 Carded 2.25 lb 1 









80720 099575807206 Carded 2.30 lb 1 





316















Cat. No. UPC No. Packaging Overall Length No. of Positions Repair Kit Product Weight Shelf Pack Qty. 

81304P 099575830402 Carded 11.024 120 81339P 1.87 lb 1 






















1/2" Drive Quick-Release Teardrop Ratchet 









1/2" 

3 




317





81339F 099575811395 Bagged 

81339P 099575831393 Bagged 

1/2" Drive Non Quick Release 

Ratchet Repair Kit 


Ratchet Repair Kit Dual Pawl 120XP 

81304, 81306, 81303, 81304F, 

81306F, 81303F 

Tooth 

Count 

No. of 

Positions 

Product 

Weight 

Shelf Pack 

Qty. 

84 - 0.20 lb 1 

81304P - 120 0.25 lb 1 

■■T-Handle Slides for Optimum Position 





81311 099575813115 Carded 15 in 0.95 lb 1 




1/2" Drive Full Polish Flex Handle / Breaker Bar 


81307 099575813078 Carded 15 in 1.54 lb 1 

81308D 099575813085 Carded 24 in 2.75 lb 1 


■■Full Polish Chrome finish Cleans Easily and Resists Corrosion 



80600D 099575806001 Carded 2.875 in 1/2" 1/2" 0.33 lb 1 

318







81257 099575812576 Carded 3.25 in 1/2" 1/2" 0.50 lb 1 


1/2" Drive Standard Adapters 


81354 099575813542 Carded 1.38 in 1/2" 3/8" 0.06 lb 1 

81355 099575813559 Carded 1.5 in 1/2" 3/4" 0.28 lb 1 

1/2" 





81340 099575813405 Carded 3 in No 0.27 lb 1 

81341 099575813412 Carded 5 in No 0.44 lb 1 

81342 099575813429 Carded 10 in No 0.86 lb 1 

81343 099575813436 Carded 15 in No 1.30 lb 1 


■■Spinner Handle Design for Ultra Fast Action 



81312 099575813122 Carded 19 in 2.45 lb 1 

3 


319




3 Pc. 1/2" Drive Standard Extension Set 


81300 099575813009 Carded 2.98 lb 1 











81263 099575812637 Carded 6 in No 0.70 lb 1 


or as Wobble Extension when Partially Inserted 


■■Full Polished Chrome Finish 

1/2" Drive Wobble Extension 







or as Wobble Extension when Partially Inserted 


■■Full Polished Chrome Finish 



81301 099575813016 Carded 2.98 lb 1 




320





81348 099575813481 Carded 3 in No 0.29 lb 1 

81349 099575813498 Carded 10 in No 0.44 lb 1 

81350 099575813504 Carded 15 in No 0.86 lb 1 




81302 099575813023 Carded 1.76 lb 1 




1/2" 

3 


321









1/2" Drive 6 and 12 Point SAE Standard Length 

Sockets 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 











80612 099575806124 Carded 6 Point 1-1/16 in 1.413 in 1.413 in 1.575 in 0.472 in 0.886 in 0.748 in 0.38 lb 1 




















Product 

Weight 

Shelf 

Pack Qty. 

322












Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





































Product 

Weight 

Shelf 

Pack Qty. 

1/2" 

3 


323



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





Product 

Weight 

Shelf 

Pack Qty. 












Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





























Product 

Weight 

Shelf 

Pack Qty. 

324









1/2" Drive 6 and 12 Point Metric Deep Length 

Sockets 

Cat. No. 

UPC No. 

Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 




























Product 

Weight 

Shelf 

Pack Qty. 

1/2" 

3 


325







Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 







80657 099575806575 Carded 3/4" 1.102 in 1.102 in 2.480 in 1.490 in 1.097 0.44 lb 1 











Product 

Weight 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 



Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

326






Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 


Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 


Product 

Weight 

Shelf Pack 

Qty. 




1/2" 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Exposed Bit 

Length 





Dim. A: Drive 

End 

Dim. B: Nose 

Diameter 

Product 

Weight 

Shelf Pack 

Qty. 


Length Product Weight Shelf Pack Qty. 

80669D 099575806698 Carded E18 0.944 in 0.944 in 1.500 in 0.30 lb 1 




3 


327



■■Six drawer top chest provides versatile storage 



into the foam 





■■Sockets incorporate a radius corner design that engages the 

flats of the fastener as well as a unique retention method, cold 

form ball recess, which provides consistent secure retention of 

the socket to the drive tool 







15-500 781412155006 16-880 Top Chest 50.00 lb 1 

15-505 781412155051 Boxed 33.38 lb 1 













12-892 1/2" Drive Screwdriver Drag Link Socket 7/64" x 15/16" 12-116D 1/2" Drive 12 Point Standard Socket 1/2" 

12-893 1/2" Drive Screwdriver Drag Link Socket 3/32" x 1-1/4" 12-118D 1/2" Drive 12 Point Standard Socket 9/16" 





12-714 1/2" Drive Standard Length Hex Driver Socket 5/16" Bit 12-122 1/2" Drive 12 Point Standard Socket 11/16" 





























328













































Cat. No. UPC No. Shelf Pack Qty. 

15-399 781412153996 1 


12-992 1/2" Drive Armstrong MAXX Standard Handle Ratchet 39-011 1/2" Drive 6 Point Standard Socket 11mm 

12-947 1/2" Drive Universal Joint 39-012 1/2" Drive 6 Point Standard Socket 12mm 


12-923 1/2" Drive Extension 5" 39-014D 1/2" Drive 6 Point Standard Socket 14mm 










12-032D 1/2" Drive 6 Point Standard Socket 1" 39-024D 1/2" Drive 6 Point Standard Socket 24mm 

1/2" 

3 


329



12-034 1/2" Drive 6 Point Standard Socket 1-1/16" 39-310 1/2" Drive 12 Point Deep Socket 10mm 

12-036D 1/2" Drive 6 Point Standard Socket 1-1/8" 39-311 1/2" Drive 12 Point Deep Socket 11mm 







12-228D 1/2" Drive 6 Point Deep Socket 7/8" 39-318 1/2" Drive 12 Point Deep Socket 18mm 

12-230D 1/2" Drive 6 Point Deep Socket 15/16" 39-319 1/2" Drive 12 Point Deep Socket 19mm 









tool 






into the foam 












12-918 1/2" Drive Breaker Bar 17" 39-123 1/2" Drive 12 Point Standard Socket 23mm 















330








tool 






into the foam 












12-972 1/2" Drive Teardrop Ratchet 12-134 1/2" Drive 12 Point Standard Socket 1-1/16" 

12-918 1/2" Drive Breaker Bar 17" 12-136D 1/2" Drive 12 Point Standard Socket 1-1/8" 

12-923 1/2" Drive Extension 5" 12-140 1/2" Drive 12 Point Standard Socket 1-1/4" 









12-126 1/2" Drive 12 Point Standard Socket 13/16" 12-332 1/2" Drive 12 Point Deep Socket 1" 

12-128 1/2" Drive 12 Point Standard Socket 7/8" 12-334 1/2" Drive 12 Point Deep Socket 1-1/16" 

12-130 1/2" Drive 12 Point Standard Socket 15/16" 12-336 1/2" Drive 12 Point Deep Socket 1-1/8" 

12-132 1/2" Drive 12 Point Standard Socket 1" 12-340 1/2" Drive 12 Point Deep Socket 1-1/4" 

1/2" 

3 


331








tool 






into the foam 












12-918 1/2" Drive Breaker Bar 17" 39-121D 1/2" Drive 12 Point Standard Socket 21mm 












39-118D 1/2" Drive 12 Point Standard Socket 18mm 12-947 1/2" Drive Universal Joint 


332








tool 






into the foam 












12-918 1/2" Drive Breaker Bar 17" 12-122 1/2" Drive 12 Point Standard Socket 11/16" 

12-935 1/2" Drive Speeder 19" 12-124 1/2" Drive 12 Point Standard Socket 3/4" 

12-945 1/2" Drive Ratchet Spinner 12-125 1/2" Drive 12 Point Standard Socket 25/32" 





12-114 1/2" Drive 12 Point Standard Socket 7/16" 12-134 1/2" Drive 12 Point Standard Socket 1-1/16" 

12-116D 1/2" Drive 12 Point Standard Socket 1/2" 12-136D 1/2" Drive 12 Point Standard Socket 1-1/8" 




1/2" 

3 


333







15-517A 781412155174 Metal Box 13.25 lb 1 



12-967A 1/2" Drive Quick Release Teardrop Ratchet 12-132A 1/2" Drive 12 Point Standard Socket 1" 

12-917A 1/2" Drive Breaker Bar 15" Knurled Handle 12-134A 1/2" Drive 12 Point Standard Socket 1-1/16" 

12-923A 1/2" Drive Extension 6" No Knurling 12-136A 1/2" Drive 12 Point Standard Socket 1-1/8" 

12-014 1/2" Drive 6 Point Standard Socket 7/16" 12-140A 1/2" Drive 12 Point Standard Socket 1-1/4" 













44-516A 781412445169 Metal Box 7.20 lb 1 


12-967A 1/2" Drive Quick Release Teardrop Ratchet 39-117A 1/2" Drive 12 Point Standard Socket 17mm 

12-917A 1/2" Drive Breaker Bar 15" Knurled Handle 39-118A 1/2" Drive 12 Point Standard Socket 18mm 











334








tool 






into the foam 











12-918 1/2" Drive Breaker Bar 17" 39-118D 1/2" Drive 12 Point Standard Socket 18mm 










1/2" 

3 


335








tool 






into the foam 


















12-018 1/2" Drive 6 Point Standard Socket 9/16" 12-036D 1/2" Drive 6 Point Standard Socket 1-1/8" 



336








tool 






into the foam 















12-114 1/2" Drive 12 Point Standard Socket 7/16" 12-132 1/2" Drive 12 Point Standard Socket 1" 

12-116D 1/2" Drive 12 Point Standard Socket 1/2" 12-134 1/2" Drive 12 Point Standard Socket 1-1/16" 




1/2" 

3 


337








tool 






into the foam 














12-935 1/2" Drive Speeder 19" 12-124 1/2" Drive 12 Point Standard Socket 3/4" 






338






15-518A 781412155181 Metal Box 9.01 lb 1 


12-967A 1/2" Drive Quick Release Teardrop Ratchet 12-120A 1/2" Drive 12 Point Standard Socket 5/8" 12-132A 1/2" Drive 12 Point Standard Socket 1" 

12-917A 1/2" Drive Breaker Bar 15" Knurled Handle 12-122A 1/2" Drive 12 Point Standard Socket 11/16" 12-134A 

1/2" Drive 12 Point Standard Socket 

1-1/16" 

12-923A 1/2" Drive Extension 6" No Knurling 12-124A 1/2" Drive 12 Point Standard Socket 3/4" 12-136A 1/2" Drive 12 Point Standard Socket 1-1/8" 

12-114A 1/2" Drive 12 Point Standard Socket 7/16" 12-126A 1/2" Drive 12 Point Standard Socket 13/16" 12-140A 1/2" Drive 12 Point Standard Socket 1-1/4" 









tool 






into the foam 


















1/2" 

3 


339








tool 






into the foam 






















15-519A 781412155198 Metal Box 6.50 lb 1 


12-967A 1/2" Drive Quick Release Teardrop Ratchet 12-122A 1/2" Drive 12 Point Standard Socket 11/16" 





12-120A 1/2" Drive 12 Point Standard Socket 5/8" 12-132A 1/2" Drive 12 Point Standard Socket 1" 

340






15-523A 781412155235 Metal Box 6.50 lb 1 


12-916A 1/2" Drive Roundhead Ratchet 7-1/2" Knurled Handle 12-122A 1/2" Drive 12 Point Standard Socket 11/16" 










Fasteners 





Tool Eliminating the Possibility of Either a Loose Fit or Tight Fit. 

Included on Sizes Up to 1 Inch. 




GGG-W-641E 



15-550 781412155501 Boxed 6 Point 8.44 lb 1 




16-845 1/2" Drive Socket Clips Steel 12-032D 1/2" Drive 6 Point Standard Socket 1" 









1/2" 

3 


341






Fasteners 










GGG-W-641E 



15-545 781412155457 Boxed 12 Point 9.00 lb 1 





16-845 1/2" Drive Socket Clips Steel 12-132 1/2" Drive 12 Point Standard Socket 1" 









342






Fasteners 










GGG-W-641E 



15-560 781412155600 Boxed 6 Point 4.56 lb 1 











1/2" 

3 


343






Fasteners 










GGG-W-641E 

15 Pc. 1/2" Drive 6 Point SAE Socket Set with Plastic 

Socket Rail 


15-561 781412155617 Boxed 6 Point 4.34 lb 1 



16-836 10" Socket Rail Red Plastic 12-026 1/2" Drive 6 Point Standard Socket 13/16" 

16-848 1/2" Drive Socket Clip 12-028D 1/2" Drive 6 Point Standard Socket 7/8" 








344






Fasteners 










GGG-W-641E 



15-555 781412155556 Boxed 12 Point 4.39 lb 1 











1/2" 

3 



GGG-W-641E 









12-118A 1/2" Drive 12 Point Standard Socket 9/16" 12-134A 1/2" Drive 12 Point Standard Socket 1-1/16" 






345






Fasteners 










GGG-W-641E 



15-570 781412155709 Boxed 6 Point 5.00 lb 1 



16-831 9" Socket Rail Steel 12-222 1/2" Drive 6 Point Deep Socket 11/16" 12-238D 1/2" Drive 6 Point Deep Socket 1-3/16" 

16-835 17" Socket Rail Steel 12-224 1/2" Drive 6 Point Deep Socket 3/4" 12-240 1/2" Drive 6 Point Deep Socket 1-1/4" 

16-845 1/2" Drive Socket Clips Steel 12-226 1/2" Drive 6 Point Deep Socket 13/16" 12-242 1/2" Drive 6 Point Deep Socket 1-5/16" 

12-212 1/2" Drive 6 Point Deep Socket 3/8" 12-228D 1/2" Drive 6 Point Deep Socket 7/8" 12-244 1/2" Drive 6 Point Deep Socket 1-3/8" 

12-214 1/2" Drive 6 Point Deep Socket 7/16" 12-230D 1/2" Drive 6 Point Deep Socket 15/16" 12-246D 1/2" Drive 6 Point Deep Socket 1-7/16" 

12-216 1/2" Drive 6 Point Deep Socket 1/2" 12-232 1/2" Drive 6 Point Deep Socket 1" 12-248 1/2" Drive 6 Point Deep Socket 1-1/2" 

12-218 1/2" Drive 6 Point Deep Socket 9/16" 12-234D 1/2" Drive 6 Point Deep Socket 1-1/16" 

12-220 1/2" Drive 6 Point Deep Socket 5/8" 12-236D 1/2" Drive 6 Point Deep Socket 1-1/8" 





Fasteners 










GGG-W-641E 



15-565 781412155655 Boxed 12 Point 14.21 lb 1 





12-312 1/2" Drive 12 Point Deep Socket 3/8" 12-328 1/2" Drive 12 Point Deep Socket 7/8" 12-344 1/2" Drive 12 Point Deep Socket 1-3/8" 


12-316 1/2" Drive 12 Point Deep Socket 1/2" 12-332 1/2" Drive 12 Point Deep Socket 1" 12-348 1/2" Drive 12 Point Deep Socket 1-1/2" 

12-318 1/2" Drive 12 Point Deep Socket 9/16" 12-334 1/2" Drive 12 Point Deep Socket 1-1/16" 


346






Fasteners 










GGG-W-641E 



15-580 781412155808 Boxed 6 Point 5.67 lb 1 


16-835 17" Socket Rail Steel 12-220 1/2" Drive 6 Point Deep Socket 5/8" 12-232 1/2" Drive 6 Point Deep Socket 1" 

16-845 1/2" Drive Socket Clips Steel 12-222 1/2" Drive 6 Point Deep Socket 11/16" 12-234D 1/2" Drive 6 Point Deep Socket 1-1/16" 

12-212 1/2" Drive 6 Point Deep Socket 3/8" 12-224 1/2" Drive 6 Point Deep Socket 3/4" 12-236D 1/2" Drive 6 Point Deep Socket 1-1/8" 

12-214 1/2" Drive 6 Point Deep Socket 7/16" 12-226 1/2" Drive 6 Point Deep Socket 13/16" 12-238D 1/2" Drive 6 Point Deep Socket 1-3/16" 

12-216 1/2" Drive 6 Point Deep Socket 1/2" 12-228D 1/2" Drive 6 Point Deep Socket 7/8" 12-240 1/2" Drive 6 Point Deep Socket 1-1/4" 


1/2" 





Fasteners 










GGG-W-641E 



15-575 781412155754 Boxed 12 Point 5.67 lb 1 


16-835 17" Socket Rail Steel 12-320 1/2" Drive 12 Point Deep Socket 5/8" 12-332 1/2" Drive 12 Point Deep Socket 1" 






3 


347




GGG-W-641E 


11 Pc. 1/2" Drive 12 Point SAE Deep A Series 

Socket Set 


15-522A 781412155228 Boxed 4.80 lb 1 




12-320A 1/2" Drive 12 Point Deep Socket 5/8" 12-332A 1/2" Drive 12 Point Deep Socket 1" 

12-322A 1/2" Drive 12 Point Deep Socket 11/16" 12-334A 1/2" Drive 12 Point Deep Socket 1-1/16" 

12-324A 1/2" Drive 12 Point Deep Socket 3/4" 12-336A 1/2" Drive 12 Point Deep Socket 1-1/8" 







Fasteners 









GGG-W-641E 



15-585 781412155853 Boxed 8 Point 3.13 lb 1 








348






Fasteners 












GGG-W-641E 

15 Pc. 1/2" Drive 12 Point SAE Black Oxide Socket Set 


20-650 781412206500 Boxed 12 Point 5.10 lb 1 


16-831 9" Socket Rail Steel 20-124D 1/2" Drive 12 Point Standard Socket 3/4" Black Oxide 

16-832 11" Socket Rail Steel 20-126D 1/2" Drive 12 Point Standard Socket 13/16" Black Oxide 

16-845 1/2" Drive Socket Clips Steel 20-128 1/2" Drive 12 Point Standard Socket 7/8" Black Oxide 

20-112 1/2" Drive 12 Point Standard Socket 3/8" Black Oxide 20-130D 1/2" Drive 12 Point Standard Socket 15/16" Black Oxide 

20-114 1/2" Drive 12 Point Standard Socket 7/16" Black Oxide 20-132 1/2" Drive 12 Point Standard Socket 1" Black Oxide 

20-116 1/2" Drive 12 Point Standard Socket 1/2" Black Oxide 20-134D 1/2" Drive 12 Point Standard Socket 1-1/16" Black Oxide 

20-118 1/2" Drive 12 Point Standard Socket 9/16" Black Oxide 20-136 1/2" Drive 12 Point Standard Socket 1-1/8" Black Oxide 

20-120D 1/2" Drive 12 Point Standard Socket 5/8" Black Oxide 20-140D 1/2" Drive 12 Point Standard Socket 1-1/4" Black Oxide 

20-122D 1/2" Drive 12 Point Standard Socket 11/16" Black Oxide 20-148 1/2" Drive 12 Point Standard Socket 1-1/2" Black Oxide 

1/2" 

3 


349






Fasteners 






Included on Sizes Up to 25mm. 






44-535 781412445350 Boxed 6 Point 7.69 lb 1 



16-834 13" Socket Rail Steel 39-020D 1/2" Drive 6 Point Standard Socket 20mm 













350






Fasteners 






Included on Sizes Up to 25mm. 






44-530 781412445305 Boxed 12 Point 7.69 lb 1 















1/2" 

3 


351






Fasteners 











44-545 781412445459 Boxed 6 Point 3.00 lb 1 



16-835 17" Socket Rail Steel 39-114 1/2" Drive 12 Point Standard Socket 14mm 39-120D 1/2" Drive 12 Point Standard Socket 20mm 

16-845 1/2" Drive Socket Clips Steel 39-115 1/2" Drive 12 Point Standard Socket 15mm 39-121D 1/2" Drive 12 Point Standard Socket 21mm 

39-110D 1/2" Drive 12 Point Standard Socket 10mm 39-116 1/2" Drive 12 Point Standard Socket 16mm 39-122D 1/2" Drive 12 Point Standard Socket 22mm 

39-111 1/2" Drive 12 Point Standard Socket 11mm 39-117 1/2" Drive 12 Point Standard Socket 17mm 39-123 1/2" Drive 12 Point Standard Socket 23mm 

39-112 1/2" Drive 12 Point Standard Socket 12mm 39-118D 1/2" Drive 12 Point Standard Socket 18mm 39-124 1/2" Drive 12 Point Standard Socket 24mm 






Fasteners 









15 Pc. 1/2" Drive 6 Point Metric Socket Set with 



44-546 781412445466 Boxed 6 Point 3.27 lb 1 


16-836 10" Socket Rail Red Plastic 39-014D 1/2" Drive 6 Point Standard Socket 14mm 39-020D 1/2" Drive 6 Point Standard Socket 20mm 

16-848 1/2" Drive Socket Clip 39-015 1/2" Drive 6 Point Standard Socket 15mm 39-021 1/2" Drive 6 Point Standard Socket 21mm 

39-010 1/2" Drive 6 Point Standard Socket 10mm 39-016D 1/2" Drive 6 Point Standard Socket 16mm 39-022D 1/2" Drive 6 Point Standard Socket 22mm 

39-011 1/2" Drive 6 Point Standard Socket 11mm 39-017 1/2" Drive 6 Point Standard Socket 17mm 39-023D 1/2" Drive 6 Point Standard Socket 23mm 

39-012 1/2" Drive 6 Point Standard Socket 12mm 39-018 1/2" Drive 6 Point Standard Socket 18mm 39-024D 1/2" Drive 6 Point Standard Socket 24mm 


352






Fasteners 











44-540 781412445404 Boxed 12 Point 3.16 lb 1 


16-835 17" Socket Rail Steel 39-114 1/2" Drive 12 Point Standard Socket 14mm 39-120D 1/2" Drive 12 Point Standard Socket 20mm 

16-845 1/2" Drive Socket Clips Steel 39-115 1/2" Drive 12 Point Standard Socket 15mm 39-121D 1/2" Drive 12 Point Standard Socket 21mm 

39-110D 1/2" Drive 12 Point Standard Socket 10mm 39-116 1/2" Drive 12 Point Standard Socket 16mm 39-122D 1/2" Drive 12 Point Standard Socket 22mm 

39-111 1/2" Drive 12 Point Standard Socket 11mm 39-117 1/2" Drive 12 Point Standard Socket 17mm 39-123 1/2" Drive 12 Point Standard Socket 23mm 

39-112 1/2" Drive 12 Point Standard Socket 12mm 39-118D 1/2" Drive 12 Point Standard Socket 18mm 39-124 1/2" Drive 12 Point Standard Socket 24mm 


1/2" 





Fasteners 











44-550 781412445503 Boxed 12 Point 11.58 lb 1 


16-834 13" Socket Rail Steel 39-316 1/2" Drive 12 Point Deep Socket 16mm 39-325 1/2" Drive 12 Point Deep Socket 25mm 

16-835 17" Socket Rail Steel 39-317 1/2" Drive 12 Point Deep Socket 17mm 39-326 1/2" Drive 12 Point Deep Socket 26mm 

16-845 1/2" Drive Socket Clips Steel 39-318 1/2" Drive 12 Point Deep Socket 18mm 39-327 1/2" Drive 12 Point Deep Socket 27mm 

39-310 1/2" Drive 12 Point Deep Socket 10mm 39-319 1/2" Drive 12 Point Deep Socket 19mm 39-328 1/2" Drive 12 Point Deep Socket 28mm 






3 


353





Fasteners 











44-555 781412445558 Boxed 12 Point 7.43 lb 1 












354






Fasteners 












GGG-W-641E 

14 Pc. 1/2" Drive 12 Point SAE Deep Black Oxide 

Socket Set 


20-660 781412206609 Boxed 12 Point 7.31 lb 1 


16-835 17" Socket Rail Steel 20-324 1/2" Drive 12 Point Deep Socket 3/4" Black Oxide 

16-845 1/2" Drive Socket Clips Steel 20-326 1/2" Drive 12 Point Deep Socket 13/16" Black Oxide 

20-312 1/2" Drive 12 Point Deep Socket 3/8" Black Oxide 20-328 1/2" Drive 12 Point Deep Socket 7/8" Black Oxide 

20-314 1/2" Drive 12 Point Deep Socket 7/16" Black Oxide 20-330 1/2" Drive 12 Point Deep Socket 15/16" Black Oxide 

20-316D 1/2" Drive 12 Point Deep Socket 1/2" Black Oxide 20-332D 1/2" Drive 12 Point Deep Socket 1" Black Oxide 

20-318 1/2" Drive 12 Point Deep Socket 9/16" Black Oxide 20-334D 1/2" Drive 12 Point Deep Socket 1-1/16" Black Oxide 

20-320 1/2" Drive 12 Point Deep Socket 5/8" Black Oxide 20-336D 1/2" Drive 12 Point Deep Socket 1-1/8" Black Oxide 

20-322 1/2" Drive 12 Point Deep Socket 11/16" Black Oxide 20-340 1/2" Drive 12 Point Deep Socket 1-1/4" Black Oxide 

1/2" 

3 







Fasteners 







GGG-W-641 E 



15-590 781412155907 Boxed 1.50 lb 1 


16-831 9" Socket Rail Steel 12-520D 1/2" Drive 12 Point Universal Socket 5/8" 

16-845 1/2" Drive Socket Clips Steel 12-522 1/2" Drive 12 Point Universal Socket 11/16" 

12-516 1/2" Drive 12 Point Universal Socket 1/2" 12-524 1/2" Drive 12 Point Universal Socket 3/4" 



355









Luster 



Durability 


GGG-E-1507B 


15-595 781412155952 Boxed 3.92 lb 1 


12-859 1/2" Drive Crowfoot Wrench 15/16" 12-866 1/2" Drive Crowfoot Wrench 1-7/16" 

12-860 1/2" Drive Crowfoot Wrench 1" 12-867 1/2" Drive Crowfoot Wrench 1-1/2" 

12-861 1/2" Drive Crowfoot Wrench 1-1/16" 16-835 17" Socket Rail Steel 

12-862 1/2" Drive Crowfoot Wrench 1-1/8" 16-845 1/2" Drive Socket Clips Steel 











Luster 



Durability 


GGG-E-1507B 


15-600 781412156003 Boxed 4.80 lb 1 


12-840 1/2" Drive Flare Nut Crowfoot Wrench 1-1/8" 12-849 1/2" Drive Flare Nut Crowfoot Wrench 1-11/16" 





12-845 1/2" Drive Flare Nut Crowfoot Wrench 1-7/16" 12-854 1/2" Drive Flare Nut Crowfoot Wrench 2" 

12-846 1/2" Drive Flare Nut Crowfoot Wrench 1-1/2" 16-835 17" Socket Rail Steel 

12-847 1/2" Drive Flare Nut Crowfoot Wrench 1-9/16" 16-845 1/2" Drive Socket Clips Steel 


356
















15-610 781412156102 Boxed 2.71 lb 1 





















15-605 781412156058 Boxed 2.67 lb 1 





12-754D 1/2" Drive Extra Long Hex Driver Socket 5/16" Bit 12-759 1/2" Drive Extra Long Hex Driver Socket 5/8" Bit 

1/2" 

3 


357
















44-565 781412445657 Boxed 2.70 lb 1 


16-831 9" Socket Rail Steel 39-715 1/2" Drive Standard Length Hex Driver Socket 10mm 

16-845 1/2" Drive Socket Clips Steel 39-717 1/2" Drive Standard Length Hex Driver Socket 12mm 

39-711 1/2" Drive Standard Length Hex Driver Socket 6mm 39-719 1/2" Drive Standard Length Hex Driver Socket 14mm 

39-713 1/2" Drive Standard Length Hex Driver Socket 8mm 39-722 1/2" Drive Standard Length Hex Driver Socket 17mm 


6 Pc. 1/2" Drive Metric Extra Long Hex Bit Socket Set 














44-560 781412445602 Boxed 3.44 lb 1 


16-831 9" Socket Rail Steel 39-755 1/2" Drive Extra Long Hex Driver Socket 10mm 

16-845 1/2" Drive Socket Clips Steel 39-757 1/2" Drive Extra Long Hex Driver Socket 12mm 

39-751 1/2" Drive Extra Long Hex Driver Socket 6mm 39-759 1/2" Drive Extra Long Hex Driver Socket 14mm 

39-753 1/2" Drive Extra Long Hex Driver Socket 8mm 39-762 1/2" Drive Extra Long Hex Driver Socket 17mm 

358
















15-615 781412156157 Boxed 1.68 lb 1 






7 Pc. 1/2" Drive Slotted/Phillips Bit Socket Set 














15-620 781412156201 Boxed 1.54 lb 1 


16-831 9" Socket Rail Steel 12-828 1/2" Drive Phillips Screwdriver Socket #4 

16-845 1/2" Drive Socket Clips Steel 12-802 1/2" Drive Screwdriver Socket 1/4" x 1/32" Tip 




1/2" 

3 


359












W-641E 





■■Longer Handle Generates Additional Torque with Less Effort 








W-641E 

1/2" Drive Long Handle Teardrop Ratchet 

Head 


Cat. No. UPC No. Packaging Overall Length Head Width Thickness Tooth Count Repair Kit Weight 

Qty. 



■■Flex Head for Multi-Angle, Multi-Application Use 








W-641E 

1/2" Drive Flex Head Teardrop Ratchet 



360












W-641E 


20-972D 781412209723 Bagged 10.500 in 1.625 in 0.875 in 36 12-990 1.70 lb 1 












W-641E 



1/2" 

3 




Position for Multi-Angle, Multi-Application Use Regardless of 

Load 








W-641E 




361





W-641E 





W-641E 





1/2" Drive Teardrop Quick Release Ratchet 



W-641E 



1/2" Drive Teardrop Quick Release Flex Head Ratchet 



W-641E 



362












Durability 




1/2" 






Strength 


Release 






Durability 




3 


363


1/2" Drive Black Oxide Spud Ratchet 


■■Used in Construction Applications, Tapered Handle is Used to 

Align Bolt Holes 



Durability 


W-641E 



1/2" Drive Scaffold Ratchet 


■■Includes Hammer Head for Use in Scaffold Assembly 

■■Socket Length is 2.156 



Durability 


W-641E 



12-988 781412129885 Bagged 11.500 in 1.635 in 0.875 in 36 Non-repairable 2.27 lb 1 





Durability 


12-945 781412129458 Bagged 1.625 in 0.38 lb 1 



Cat. No. UPC No. Packaging Description 

Fits Product 

Number Tooth Count Product Weight Shelf Pack Qty. 

12-963 781412129632 Bagged 1/2" Drive Roundhead Ratchet Repair Kit 12-915 45 0.22 lb 1 


12-983 781412129830 Bagged 1/2" Drive Indexible Ratchet Repair Kit 12-996 72 0.22 lb 1 

12-990 781412129908 Bagged 1/2" Drive Ratchet Repair Kit 

12-972, 12-973, 

20-972 

36 0.35 lb 1 


20-966D 781412209662 Bagged 1/2" Drive Ratchet Repair Kit 12-907 24 0.38 lb 1 

364




■■Knurled Handle on A Suffix Breaker Bars 


W-641E 


12-914A 781412029147 Bagged 9.000 in 1.20 lb 1 

12-917 781412129175 Bagged 12.000 in 1.55 lb 1 

12-917A 781412121797 Bagged 15.000 in 1.51 lb 1 

12-918 781412129182 Bagged 17.000 in 1.97 lb 1 

12-918A 781412128192 Bagged 18.000 in 1.69 lb 1 








Durability 


W-641E 


20-918 781412209181 Bagged 17.000 in 1.86 lb 1 

1/2" 





Durability 


W-641E 


12-938 781412129380 Bagged 15.000 in 0.94 lb 1 








Durability 

■■12-935A has a Knurled Handle 


W-641E 



12-935A 781412129533 Bulk with UPC 19.560 in 2.00 lb 1 

3 


365









Durability 


W-641E 


12-947 781412129472 Bagged 2.688 in 1/2" 1/2" 0.27 lb 1 

12-947A 781412127478 Bagged 2.688 in 1/2" 1/2" 0.27 lb 1 




Durability 

1/2" Drive Stud Remover, 1/2"-3/4" Stud Diameter 



12-948 781412129489 Boxed 0.52 lb 1 





Durability 


W-641E 


12-951 781412129519 Bagged 1.400 in 1/2" 3/8" 0.15 lb 1 

12-951A 781412125191 Bagged 1.400 in 1/2" 3/8" 0.15 lb 1 

12-952 781412129526 Bagged 1.850 in 1/2" 3/4" 0.34 lb 1 





■■No Knurling on A Suffix Extensions 


W-641E 


12-921 781412129212 Bagged 2.000 in No 0.24 lb 1 

12-923 781412129236 Bagged 5.000 in No 0.38 lb 1 


12-924 781412129243 Bagged 10.000 in No 0.67 lb 1 


12-927 781412129274 Bagged 20.000 in No 20.00 lb 1 

366








12-989 781412129892 Boxed 3.49 lb 1 


12-984 1/2" Drive Wobble Extension 2-1/2" 12-986 1/2" Drive Wobble Extension 10" 












1/2" 

3 






Convenience 



12-920 781412129205 Boxed 3.59 lb 1 





367







Convenience 



12-931 781412129311 Bagged 3.000 in No 0.35 lb 1 

12-936 781412129366 Bagged 5.000 in No 0.57 lb 1 

12-937 781412129373 Bagged 10.000 in No 1.05 lb 1 

12-939 781412129397 Bagged 16.000 in No 1.49 lb 1 






Fasteners 






on Socket up to 1 inch. 




GGG-W-641 E 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Product 

Weight 







12-024 781412120240 Bagged 6 Point 3/4 in 1.037 in 1.037 in 1.455 in - 0.800 in - 0.21 lb 1 


12-028D 781412120288 Bagged 6 Point 7/8 in 1.173 in 1.173 in 1.455 in - 0.800 in - 0.35 lb 1 

12-030D 781412120301 Bagged 6 Point 15/16 in 1.256 in 1.256 in 1.496 in - 0.827 in - 0.27 lb 1 

12-032D 781412120325 Bagged 6 Point 1 in 1.307 in 1.307 in 1.614 in - 0.846 in - 0.32 lb 1 

12-034 781412120349 Bagged 6 Point 1-1/16 in 1.410 in 1.410 in 1.614 in - 0.900 in - 0.45 lb 1 

12-036D 781412120363 Bagged 6 Point 1-1/8 in 1.480 in 1.480 in 1.654 in - 1.000 in - 0.52 lb 1 



12-042D 781412120424 Bagged 6 Point 1-5/16 in 1.750 in 1.750 in 2.062 in 1.062 in 0.820 in - 0.89 lb 1 

12-044 781412120448 Bagged 6 Point 1-3/8 in 1.812 in 1.812 in 2.125 in 1.062 in 0.960 in - 0.90 lb 1 


Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

368



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 















12-132 781412121322 Bagged 12 Point 1 in 1.307 in 1.307 in 1.614 in - 0.846 in - 0.41 lb 1 









Product 

Weight 

Shelf Pack 

Qty. 

1/2" 

3 


369




GGG-W-641 E 


1/2" Drive 12 Point SAE A Series Standard Length 

Sockets 













12-132A 781412121230 Boxed 12 Point 1 in 0.36 lb 5 

12-134A 781412121438 Boxed 12 Point 1-1/16 in 0.38 lb 5 




370






Fasteners 






on Socket up to 25 mm. 




1/2" Drive 6 and 12 Point Metric Standard Length 

Sockets 


Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 











39-020D 781412390209 Bagged 6 Point 20 mm 1.075 in 1.075 in 1.457 in - 0.752 in - 0.20 lb 1 






















Product 

Weight 

Shelf 

Pack Qty. 

1/2" 

3 


371



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 
















Product 

Weight 

Shelf 

Pack Qty. 


372































1/2" 

3 


373






Fasteners 












GGG-W-641 E 

1/2" Drive 12 Point SAE Standard Length Black 

Oxide Sockets 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 





20-120D 781412201208 12 Point 5/8 in 0.860 in 0.860 in 1.485 in 0.480 in 0.450 in - 0.13 lb 1 

20-122D 781412201222 12 Point 11/16 in 0.956 in 0.956 in 1.485 in 0.480 in 0.470 in - 0.16 lb 1 

20-124D 781412201246 12 Point 3/4 in 1.037 in 1.037 in 1.485 in - 0.800 in - 0.17 lb 1 


20-128 781412201284 12 Point 7/8 in 1.173 in 1.173 in 1.485 in - 0.800 in - 0.23 lb 1 


20-132 781412201321 12 Point 1 in 1.307 in 1.307 in 1.614 in - 0.846 in - 0.31 lb 1 

20-134D 781412201345 12 Point 1-1/16 in 1.410 in 1.410 in 1.614 in - 0.900 in - 0.37 lb 1 

20-136 781412201369 12 Point 1-1/8 in 1.490 in 1.490 in 1.640 in - 1.000 in - 0.50 lb 1 

20-140D 781412201406 12 Point 1-1/4 in 1.650 in 1.650 in 1.750 in - 1.000 in - 0.55 lb 1 

20-142D 781412201420 12 Point 1-5/16 in 1.750 in 1.750 in 2.125 in 1.062 in 0.850 in - 0.87 lb 1 

20-144 781412201444 12 Point 1-3/8 in 1.812 in 1.812 in 2.125 in 1.062 in 0.875 in - 1.14 lb 1 

20-146D 781412201468 12 Point 1-7/16 in 1.938 in 1.938 in 2.187 in 1.062 in 0.907 in - 1.06 lb 1 

20-148 781412201482 12 Point 1-1/2 in 2.000 in 2.000 in 2.250 in 1.062 in 0.907 in - 1.19 lb 1 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

374






Fasteners 










GGG-W-641 E 



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 


































Product 

Weight 

Shelf 

Pack Qty. 

1/2" 

3 


375



Drive 

Type 

Fastener 

Size 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 






Product 

Weight 

Shelf 

Pack Qty. 







Fasteners 






of Conditions 






Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

36-632 781412366327 Bagged 12 Point 1 in 1.307 in 1.307 in 3.248 in 0.887 in 1 in 0.63 lb 1 

36-634 781412366341 Bagged 12 Point 1-1/16 in 1.405 in 1.405 in 3.248 in 0.99 in 1.511 in 0.70 lb 1 



Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Shelf Pack 

Qty. 

376




GGG-W-641 E 


1/2" Drive 12 Point SAE A Series Deep Length Sockets 










12-332A 781412120233 Boxed 12 Point 1 in 0.65 lb 5 




1/2" 

3 


377






Fasteners 






on Socket up to 25 mm. 






Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 























Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

378






Fasteners 












GGG-W-641 E 

1/2" Drive 12 Point SAE Deep Black Oxide Sockets 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 











20-332D 781412203325 Bagged 12 Point 1 in 1.307 in 1.307 in 3.235 in 0.870 in 1.300 in - 0.62 lb 1 




Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

1/2" 

3 


379












Durability 


GGG-W-641 E 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 
















Durability 

■■Meets or Exceeds US Federal Spec. GGG-W-641 E 

Dim. C: 

Overall 

Length 


Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

Dim. A: Drive End Hex Dim. B: Nose Dim. C: Overall Dim. E: Product Shelf Pack 

Cat. No. UPC No. Packaging Fastener Size Across Flats Diameter Length Wrench Depth Weight 

Qty. 


380








Fasteners 







GGG-W-641 E 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




12-522 781412125221 Bagged 11/16 in 0.940 in 0.940 in 2.500 in 0.500 in 0.468 in - 0.28 lb 1 


Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 







Fasteners 









GGG-W-641 E 

1/2" Drive 12 Point SAE Black Oxide Flex Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 






Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/2" 

3 


381








Luster 



Durability 


GGG-W-641 E 



End A 


End A 


End B 

Thickness 

Product 

Weight 

Shelf Pack 

Qty. 



12-861 781412128611 Bagged 1-1/16 in 2.218 in 0.609 in 1.000 in 0.562 in 0.53 lb 1 













Luster 



Durability 


GGG-W-641 E 


Cat. No. UPC No. Packaging End A Fastener Size End A Width 

End A 


End B 


Product 

Weight 

Shelf Pack 

Qty. 
















382






Durability 

1/2" Drive Drag Link Screwdriver Sockets 

Cat. No. UPC No. Packaging Overall Length Dim. A1: Blade Tip Width Inches Dim. A2: Blade Tip Length Inches Product Weight Shelf Pack Qty. 

12-892 781412128925 Bagged 1.590 in 7/64 in 15/16 in 0.18 lb 1 

12-893 781412128932 Bagged 1.690 in 3/32 in 1-1/4 in 0.35 lb 1 











■■Broached Hex in the Bit Holder Allows Higher Torque Loads. Bits 

Press Fit on A Suffix Bit Sockets 

■■EYE-D Markings Optimize Size Visibility - No EYE-D 

Markings on "A" Suffix Bit Sockets 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 


Length 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 

Shelf Pack 

Qty. 
















12-713A 781412127317 Bagged 1/4 in 0.860 in 0.611 in 3.250 in 2.250 in No - 0.16 lb 1 







1/2" 

3 


383














1/2" Drive SAE/Metric Extra Long Hex Bit Sockets 


Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 


12-754D 781412127546 Bagged 5/16 in 0.860 in 0.709 in 5.000 in 4.000 in Yes 94-254 0.23 lb 1 











Dim. C: 

Overall 

Length 














Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 

Product 

Weight 








Dim. C: 

Overall 

Length 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

384






Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Nose 

Diameter 


Length 

Dim. D: Bit 

Length 

Replaceable 

Bit? 

Replacement 

Bit 








Product 

Weight 

Shelf Pack 

Qty. 







1/2" 

3 


RD16BK 037103215925 Bagged 1.45 lb 5 


385


■■Includes Metal Storage Box 


Markings 



■■Full Polish Chrome Flex Handle With Knurled Grip 


Rounding 


27 Pc. 3/4" Drive 12 Point SAE Mechanics 

Tool Set 


80880 099575808807 Boxed 26.40 lb 1 



81400 3/4" Drive Quick Release Ratchet 80834 3/4" Drive 12 Point Socket 1-1/16" 80856 3/4" Drive 12 Point Socket 1-11/16" 

81404 3/4" Drive Flex Handle/Breaker Bar 19" Long 80835D 3/4" Drive 12 Point Socket 1-1/8" 80857 3/4" Drive 12 Point Socket 1-3/4" 

81401 18" Sliding T Handle 80838 3/4" Drive 12 Point Socket 1-3/16" 80859 3/4" Drive 12 Point Socket 1-13/16" 

81411 3/4" Drive Standard Extension 5" 80839 3/4" Drive 12 Point Socket 1-1/4" 80860 3/4" Drive 12 Point Socket 1-7/8" 

81412 3/4" Drive Standard Extension 8" 80840 3/4" Drive 12 Point Socket 1-5/16" 80861 3/4" Drive 12 Point Socket 2" 

81413 3/4" Drive Standard Extension 16" 80841 3/4" Drive 12 Point Socket 1-3/8" 80862 3/4" Drive 12 Point Socket 2-1/8" 

80830 3/4" Drive 12 Point Socket 7/8" 80852 3/4" Drive 12 Point Socket 1-7/16" 80863 3/4" Drive 12 Point Socket 2-3/16" 

80831 3/4" Drive 12 Point Socket 15/16" 80854 3/4" Drive 12 Point Socket 1-1/2" 80864 3/4" Drive 12 Point Socket 2-1/4"" 

80833 3/4" Drive 12 Point Socket 1" 80855D 3/4" Drive 12 Point Socket 1-5/8" 80865 3/4" Drive 12 Point Socket 2-3/8" 

■■Includes Metal Storage Box 


Markings 




Rounding 




80879 099575808791 Boxed 18.8 lb 1 


81400 3/4" Drive Quick Release Ratchet 80834 3/4" Drive 12 Point Socket 1-1/16" 80841 3/4" Drive 12 Point Socket 1-3/8" 

81412 3/4" Drive Standard Extension 8" 80835D 3/4" Drive 12 Point Socket 1-1/8" 80852 3/4" Drive 12 Point Socket 1-7/16" 

80830 3/4" Drive 12 Point Socket 7/8" 80838 3/4" Drive 12 Point Socket 1-3/16" 80854 3/4" Drive 12 Point Socket 1-1/2" 

80831 3/4" Drive 12 Point Socket 15/16" 80839 3/4" Drive 12 Point Socket 1-1/4" 

80833 3/4" Drive 12 Point Socket 1" 80840 3/4" Drive 12 Point Socket 1-5/16" 

386







Cat. No. UPC No. Packaging Overall Length Head Thickness Tooth Count Product Weight Shelf Pack Qty. 

81400 099575814006 Carded 19.750 in 1.34 in 24 5.20 lb 1 


Cat. No. UPC No. Packaging Description Fits Product Number Tooth Count Shelf Pack Qty. 

81499 099575814990 Bagged 3/4" Drive Ratchet Repair Kit 81400 24 1 



81401 099575814013 3.07 lb 1 

3/4" 






81404 099575814044 Carded 19 in 4.07 lb 1 



81411 099575814112 Carded 5 in No 1.10 lb 1 

81412 099575814129 Carded 8 in No 2.00 lb 1 

81413 099575814136 Carded 16 in No 2.58 lb 1 

3 


387










Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

80830 099575808302 Carded 12 Point 7/8 in 1.417 in 1.268 in 1.969 in 0.551 in 0.866 in 0.462 lb 1 

80831 099575808319 Carded 12 Point 15/16 in 1.417 in 1.346 in 2.008 in 0.630 in 0.866 in 0.484 lb 1 

80833 099575808333 Carded 12 Point 1 in 1.417 in 1.457 in 2.047 in 0.630 in 1.181 in 0.484 lb 1 

80834 099575808340 Carded 12 Point 1-1/16 in 1.417 in 1.496 in 2.047 in 0.866 in 1.181 in 0.484 lb 1 

80835D 099575808357 Carded 12 Point 1-1/8 in 1.496 in 1.575 in 2.047 in 0.866 in 1.181 in 0.550 lb 1 







80855D 099575808555 Carded 12 Point 1-5/8 in 1.772 in 2.205 in 2.520 in 1.181 in 1.575 in 1.166 lb 1 





80861 099575808616 Carded 12 Point 2 in 1.890 in 2.677 in 2.835 in 1.417 in 1.654 in 1.628 lb 1 





Product 

Weight 

Shelf Pack 

Qty. 

388



■■Extra heavy duty gauge metal box with full hinge is specifically 

designed for large drive size socket sets 



into the foam 

■■Ratchet has a compact head design, recessed reversing lever, 

Unique "I-Beam" handle design, as well as the "Torque Wrap" 

design incorporating a 15 degree ratcheting arc 

■■Socket wall dimensions are optimized to provide strength while 

retaining access to restricted fasteners 





44-700 781412447002 Metal Box 80.00 lb 1 


13-972 3/4" Drive Ratchet 40-141 3/4" Drive 12 Point Standard Socket 41mm 
















40-129 3/4" Drive 12 Point Standard Socket 29mm 40-338D 3/4" Drive 12 Point Deep Socket 38mm 






3/4" 

3 


389







into the foam 











15-700 781412157000 Metal Box 90.00 lb 1 



13-972 3/4" Drive Ratchet 13-154D 3/4" Drive 12 Point Standard Socket 1-11/16" 


13-938 3/4" Drive T-Handle 20" 13-158 3/4" Drive 12 Point Standard Socket 1-13/16" 


13-923 3/4" Drive Extension 8" 13-164 3/4" Drive 12 Point Standard Socket 2" 






13-132 3/4" Drive 12 Point Standard Socket 1" 13-330 3/4" Drive 12 Point Deep Socket 15/16" 

13-134 3/4" Drive 12 Point Standard Socket 1-1/16" 13-332 3/4" Drive 12 Point Deep Socket 1" 

13-136 3/4" Drive 12 Point Standard Socket 1-1/8" 13-334 3/4" Drive 12 Point Deep Socket 1-1/16" 






13-148D 3/4" Drive 12 Point Standard Socket 1-1/2" 13-348 3/4" Drive 12 Point Deep Socket 1-1/2" 


13-152 3/4" Drive 12 Point Standard Socket 1-5/8" 13-947 3/4" Drive Universal Joint 

390







into the foam 










15-705 781412157055 Metal Box 70.00 lb 1 


13-972 3/4" Drive Ratchet 13-146 3/4" Drive 12 Point Standard Socket 1-7/16" 




13-923 3/4" Drive Extension 8" 13-154D 3/4" Drive 12 Point Standard Socket 1-11/16" 




13-132 3/4" Drive 12 Point Standard Socket 1" 13-164 3/4" Drive 12 Point Standard Socket 2" 

13-134 3/4" Drive 12 Point Standard Socket 1-1/16" 13-168 3/4" Drive 12 Point Standard Socket 2-1/8" 



13-140 3/4" Drive 12 Point Standard Socket 1-1/4" 13-176D 3/4" Drive 12 Point Standard Socket 2-3/8" 

13-142 3/4" Drive 12 Point Standard Socket 1-5/16" 13-947 3/4" Drive Universal Joint 


3/4" 

3 


391







into the foam 









44-705 781412447057 Metal Box 62.50 lb 1 

















392








into the foam 









15-710 781412157109 Metal Box 40.00 lb 1 



13-918 3/4" Drive Breaker Bar 22" 13-142 3/4" Drive 12 Point Standard Socket 1-5/16" 






13-132 3/4" Drive 12 Point Standard Socket 1" 13-158 3/4" Drive 12 Point Standard Socket 1-13/16" 


13-136 3/4" Drive 12 Point Standard Socket 1-1/8" 13-164 3/4" Drive 12 Point Standard Socket 2" 

3/4" 

3 


393







into the foam 









44-710 781412447101 Metal Box 47.87 lb 1 



















into the foam 









15-715 781412157154 Metal Box 44.21 lb 1 






13-132 3/4" Drive 12 Point Standard Socket 1" 13-146 3/4" Drive 12 Point Standard Socket 1-7/16" 



394






Fasteners 







Durability 




44-715 781412447156 Boxed 12 Point 14.36 lb 1 












3/4" 

3 


395






Fasteners 







Durability 


GGG-W-641E 



15-735 781412157352 Boxed 12 Point 16.02 lb 1 



16-835 17" Socket Rail Steel 13-144 3/4" Drive 12 Point Standard Socket 1-3/8" 

16-847 3/4" Drive Socket Clips Steel 13-146 3/4" Drive 12 Point Standard Socket 1-7/16" 



13-132 3/4" Drive 12 Point Standard Socket 1" 13-154D 3/4" Drive 12 Point Standard Socket 1-11/16" 




13-142 3/4" Drive 12 Point Standard Socket 1-5/16" 13-164 3/4" Drive 12 Point Standard Socket 2" 





Fasteners 







Durability 




44-720 781412447200 Boxed 12 Point 17.69 lb 1 





40-322 3/4" Drive 12 Point Deep Socket 22mm 40-338D 3/4" Drive 12 Point Deep Socket 38mm 




396






Fasteners 







Durability 


GGG-W-641E 



15-740 781412157406 Boxed 12 Point 14.48 lb 1 


16-831 9" Socket Rail Steel 13-336 3/4" Drive 12 Point Deep Socket 1-1/8" 

16-832 11" Socket Rail Steel 13-340 3/4" Drive 12 Point Deep Socket 1-1/4" 

16-847 3/4" Drive Socket Clips Steel 13-342 3/4" Drive 12 Point Deep Socket 1-5/16" 



13-332 3/4" Drive 12 Point Deep Socket 1" 13-348 3/4" Drive 12 Point Deep Socket 1-1/2" 

13-334 3/4" Drive 12 Point Deep Socket 1-1/16" 13-352 3/4" Drive 12 Point Deep Socket 1-5/8" 

3/4" 

3/4" Drive Ratchet 



■■Recessed Reversing for Safety 



■■I-Beam Handle Design for Greater Strength in Industrial 

Environments 


W-641E 


13-972 781412139723 Bulk with UPC 19.000 in 2.500 in 2.000 in 24 13-990 5.05 lb 1 

3/4" Drive Black Oxide Ratchet 







Environments 



Durability 



3 


397





13-972A 781412137293 Bulk with UPC 19.690 in 2.500 in 2.280 in 36 5.20 lb 1 




Durability 


W-641E 




13-918 781412139181 Bagged 22.000 in 4.54 lb 1 




Durability 


W-641E 







13-990 781412139907 Bagged 3/4" Drive Ratchet Repair Kit 13-972, 21-972 24 0.65 lb 1 

398






Durability 


W-641E 










Durability 


W-641E 


13-947 781412139471 Bagged 4.156 in 3/4" 3/4" 1.23 lb 1 

13-947A 781412139747 Bagged 4.156 in 3/4" 3/4" 1.23 lb 1 

3/4" 





Durability 


W-641E 


13-951 781412139518 Bagged 2.093 in 3/4" 1/2" 0.51 lb 1 

13-951A 781412139150 Bagged 2.093 in 3/4" 1/2" 0.45 lb 1 

13-952 781412139525 Bagged 2.550 in 3/4" 1" 0.75 lb 1 




W-641E 


13-922 781412139228 Bagged 5.000 in No 1.10 lb 1 

13-923 781412139235 Bagged 8.000 in No 1.77 lb 1 

13-925 781412139259 Bagged 16.000 in No 3.41 lb 1 

3 


399






Fasteners 







Durability 


GGG-W-641 E 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Product 

Weight 

13-124 781412131246 Bulk 12 Point 3/4 in 1.290 in 1.187 in 1.900 in 0.625 in 0.540 in 0.813 in 0.36 lb 1 

13-126 781412131260 Bulk 12 Point 13/16 in 1.295 in 1.295 in 1.937 in 0.625 in 0.540 in - 0.40 lb 1 



13-132 781412131321 Bulk 12 Point 1 in 1.480 in 1.480 in 2.000 in 0.688 in 0.650 in - 0.50 lb 1 

13-134 781412131345 Bulk 12 Point 1-1/16 in 1.540 in 1.540 in 2.094 in 0.688 in 0.650 in - 0.54 lb 1 

13-136 781412131369 Bulk 12 Point 1-1/8 in 1.540 in 1.640 in 2.125 in 1.062 in 0.750 in 0.625 in 0.69 lb 1 






13-148D 781412131482 Bulk 12 Point 1-1/2 in 1.603 in 2.098 in 2.295 in 1.500 in 1.200 in 1.390 in 1.07 lb 1 







13-164 781412131642 Bulk 12 Point 2 in 1.758 in 2.690 in 2.985 in 2.000 in 1.600 in 1.860 in 2.54 lb 1 







Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

400






Fasteners 







Durability 


3/4" Drive 12 Point Metric Standard Length Sockets 

Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Product 

Weight 

40-119 781412401196 Bulk 12 Point 19 mm 1.291 in 1.185 in 1.937 in 0.563 in 0.598 in 0.815 in 0.34 lb 1 


40-121 781412401219 Bulk 12 Point 21 mm 1.295 in 1.295 in 1.969 in 0.689 in 0.598 in - 0.38 lb 1 






















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

3/4" 

3 


401






Fasteners 







Durability 


GGG-W-641 E 

3/4" Drive 12 Point SAE Deep Length Sockets 


Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 



13-332 781412133325 Bulk 12 Point 1 in 1.480 in 1.480 in 3.375 in 0.880 in 1.150 in - 3.34 lb 1 









Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

402






Fasteners 







Durability 



Dim. A: 

Drive 

End 

Dim. B: 

Wrench 

End 


Drive 

Type 

Fastener 

Size 

Dim. D: Bolt 

Clearance 

Product 

Weight 










40-338D 781412403381 Bulk 12 Point 38 mm 1.874 in 2.000 in 3.500 in 1.299 in 1.126 in 0.752 in 3.53 lb 1 






Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf 

Pack Qty. 

3/4" 

3 


403


■■World famous Crescent brand 

■■Exceeds ANSI specifications 

■■Providing quality tools since 1907 



CTK21SAE 037103223784 Boxed 36.00 lb 1 

3 / 4 " 


- 

3/4" Drive, 24-Tooth Quick-release Ratchet 

Drive with Knurled Handle 

1 - 3/4" Drive, 8" Extension 1 

- 3/4" Drive, Swivel Breaker Bar 1 - 3/4" Drive, 16" Extension 1 


3/4" Drive, 12-Point Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 

1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 3/4", 1 13/16", 1 7/8", 2" 

16 

3 







CTK21ME 037103223791 Boxed 36.00 lb 1 


- 

3/4" Drive, 24-Tooth Quick-release Ratchet Drive 

with Knurled Handle 

1 - 3/4" Drive, 8" Extension 1 

- 3/4" Drive, Swivel Breaker Bar 1 - 3/4" Drive, 16" Extension 1 


3/4" Drive, 6-Point Sockets: 19mm, 21mm, 22mm, 23mm, 24mm, 26mm, 

27mm, 29mm, 30mm, 32mm, 35mm, 36mm, 38mm, 41mm, 46mm, 50mm 

16 

404







CTK14SAE 037103223807 Boxed 26.00 lb 1 


- 3/4" Drive, 24-Tooth Quick-release Ratchet Drive with Knurled Handle 1 - 3/4" Drive, 8" Extension 1 

- 3/4" Drive, Swivel Breaker Bar with Knurled Handle 1 - 

- 3/4" Drive, 4" Extension 1 

3/4" Drive, 12-Point Sockets: 7/8", 15/16", 1", 1 1/8", 1 

1/4", 1 7/16", 1 1/2", 1 5/8", 1 3/4", 2" 

10 





3 / 4 " 


CTK14ME 037103223814 Boxed 11.12 lb 1 


- 3/4" Drive, 24-Tooth Quick-release Ratchet Drive with Knurled Handle 1 - 3/4" Drive, 8" Extension 1 

- 3/4" Drive, Swivel Breaker Bar with Knurled Handle 1 - 

3/4" Drive, 6-Point Sockets: 22mm, 24mm, 27mm, 30mm, 

32mm, 36mm, 38mm, 41mm, 46mm, 50mm 

10 

- 3/4" Drive, 4" Extension 1 

3 RATCHETS / SOCKETS / DRIVE TOOLS / SETS 

405


29 Pc. 1" Drive 12 Point SAE Mechanics Tool Set 









■■All tools are manufactured from high alloy steel using the most 

up-to-date manufacturing process and heat treat for greater 

strength and durability 




15-800 781412158007 Metal Box 169.00 lb 1 

RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 1" 


14-906 1" Drive Ratchet 30" 14-160 1" Drive 12 Point Standard Socket 1-7/8" 

14-918 1" Drive Breaker Bar 27" 14-164D 1" Drive 12 Point Standard Socket 2" 

14-939 1" Drive Sliding Handle 20" 14-168 1" Drive 12 Point Standard Socket 2-1/8" 

14-940 1" Drive Adapter for 14-939 Handle 14-170 1" Drive 12 Point Standard Socket 2-3/16" 

14-924 1" Drive Extension 9" 14-172 1" Drive 12 Point Standard Socket 2-1/4" 


14-134 1" Drive 12 Point Standard Socket 1-1/16" 14-180 1" Drive 12 Point Standard Socket 2-1/2" 

14-136D 1" Drive 12 Point Standard Socket 1-1/8" 14-182 1" Drive 12 Point Standard Socket 2-9/16" 




14-146 1" Drive 12 Point Standard Socket 1-7/16" 14-196 1" Drive 12 Point Standard Socket 3" 



14-158 1" Drive 12 Point Standard Socket 1-13/16" 

406

















15-805 781412158052 Metal Box 90.00 lb 1 



14-918 1" Drive Breaker Bar 27" 14-172 1" Drive 12 Point Standard Socket 2-1/4" 

14-939 1" Drive Sliding Handle 20" 14-176 1" Drive 12 Point Standard Socket 2-3/8" 

14-940 1" Drive Adapter for 14-939 Handle 14-180 1" Drive 12 Point Standard Socket 2-1/2" 





14-158 1" Drive 12 Point Standard Socket 1-13/16" 14-196 1" Drive 12 Point Standard Socket 3" 


14-164D 1" Drive 12 Point Standard Socket 2" 14-212 1" Drive 12 Point Standard Socket 3-1/2" 

1" 

3 


407

















15-810 781412158106 Metal Box 70.00 lb 1 




14-918 1" Drive Breaker Bar 27" 14-148 1" Drive 12 Point Standard Socket 1-1/2" 






14-142 1" Drive 12 Point Standard Socket 1-5/16" 14-164D 1" Drive 12 Point Standard Socket 2" 

14-144 1" Drive 12 Point Standard Socket 1-3/8" 

1" Drive Ratchet 







Environments 


W-641E 



408


1" Drive Black Oxide Ratchet 







Environments 


W-641E 




1" Drive Ratchet Repair Kit 

Fits Product 


Number Tooth Count Product Weight Shelf Pack Qty. 

14-966 781412149661 Bagged 1" Drive Ratchet Repair Kit for 14-906 and 22-906 14-906, 22-906 24 2.98 lb 1 

1" 

1" Drive Flex Handle / Breaker Bar 




Durability 


W-641E 


14-918 781412149180 Bulk 26.250 in 8.90 lb 1 

1" Drive Sliding T-Handle 




Durability 


W-641E 



3 


409


1" Drive Sliding Handle 




Durability 


W-641E 






Durability 


W-641E 

1" Drive Adapter for 14-939 Sliding Handle 



14-940 781412149401 Bagged 2.938 in 3.00 lb 1 

1" Drive Adapter to 3/4" Drive 




Durability 


W-641E 


14-951 781412149517 Bagged 2.625 in 1" 3/4" 0.89 lb 1 

1" Drive Extensions 



W-641E 


14-924 781412149241 Bagged 9.000 in No 9.00 lb 1 

14-926 781412149265 Bagged 18.000 in No 18.00 lb 1 

410






Fasteners 







Durability 


GGG-W-641 E 

1" Drive 12 Point SAE Standard Length Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

14-134 781412141344 Bulk 12 Point 1-1/16 in 1.693 in 1.638 in 2.265 in 1.000 in 0.620 in 0.64 lb 1 

14-136D 781412141368 Bulk 12 Point 1-1/8 in 1.693 in 1.693 in 2.265 in 1.094 in 0.656 in 1.13 lb 1 

14-140D 781412141405 Bulk 12 Point 1-1/4 in 1.823 in 1.823 in 2.265 in 1.219 in 0.750 in 0.82 lb 1 










14-164D 781412141641 Bulk 12 Point 2 in 2.258 in 2.258 in 2.985 in 2.000 in 1.468 in 3.34 lb 1 










14-196 781412141962 Bulk 12 Point 3 in 2.680 in 2.680 in 4.185 in 3.000 in 2.468 in 5.25 lb 1 



Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1" 

3 


411


1-1/2" Drive Black Oxide Ratchet 







Environments 


W-641E 




1-1/2" Drive Ratchet Repair Kit 


23-966 781412239669 Bagged 1-1/2" Drive Ratchet Repair Kit 23-906 24 2.95 lb 1 


412


■■Up to 50% Thinner Head Profile Than Conventional Ratchet 

Systems 

■■11 Locking Head Positions 

■■5 Degree Ratcheting Arc 

■■Up to 40% Stronger Than Traditional Ratchets By Eliminating 

Drive Tang 


■■Pass-Thru® Ratchet & Socket System Eliminates the Need for 

Deep Sockets 

27 Pc. 1/4" Drive 6 Point SAE/Metric Pass-Thru® 

with Locking Flex GearRatchet Mechanics 

Tool Set 




891400 1/4" Drive (13mm) Pass Thru Ratchet XL Locking Flex-Head 522350GR 1/4" Drive (13mm) Vortex Socket 3.5mm 

221060GR 1/4" Vortex Extension 3" 522040GR 1/4" Drive (13mm) Vortex Socket 4mm 

221080GR 1/4" Vortex Extension 6" 522450GR 1/4" Drive (13mm) Vortex Socket 4.5mm 

231061GR 1/4" Drive Pass-Thru® Quick-Release Adapters 522050GR 1/4" Drive (13mm) Vortex Socket 5mm 

122050GR 1/4" Drive (13mm) Vortex Socket 5/32" 522550GR 1/4" Drive (13mm) Vortex Socket 5.5mm 

122060GR 1/4" Drive (13mm) Vortex Socket 3/16" 522060GR 1/4" Drive (13mm) Vortex Socket 6mm 








122180GR 1/4" Drive (13mm) Vortex Socket 9/16" 

XL PASS-THRU 

3 


413



Systems 




Drive Tang 



Deep Sockets 



Tool Set 



RATCHETS / SOCKETS / DRIVE TOOLS / SETS 3 XL PASS-THRU 


893800 3/8" Drive (20mm) Pass Thru Ratchet XL Locking Flex-Head 132280GR 3/8" Vortex Socket 7/8" 

231062GR 3/8" Pass-Thru® Quick-Release Adapters 532100GR 3/8" Vortex Socket 10mm 

231060GR 3/8" Vortex Extension 6" 532110GR 3/8" Vortex Socket 11mm 


132120GR 3/8" Vortex Socket 3/8" 532130GR 3/8" Vortex Socket 13mm 







132260GR 3/8" Vortex Socket 13/16" 

414



Systems 




Drive Tang 



Deep Sockets 



Tool Set 




891200 1/2" Drive (30mm) Pass Thru Ratchet XL Locking Flex-Head Ratchet 542150GR 1/2" Vortex Socket 15mm 

241062GR 1/2" Pass-Thru® Quick-Release Adapters 542160GR 1/2" Vortex Socket 16mm 








142320GR 1/2" Vortex Socket 1" 542270GR 1/2" Vortex Socket 27mm 

142340GR 1/2" Vortex Socket 1-1/16" 542300GR 1/2" Vortex Socket 30mm 

142360GR 1/2" Vortex Socket 1-1/8" 542320GR 1/2" Vortex Socket 32mm 

142380GR 1/2" Vortex Socket 1-1/4" 

XL PASS-THRU 

3 


415


■■Vortex Bit Sockets Are Available in Hex, Torx®, Phillips, and 

Slotted 

■■Vortex Bit Sockets are Broached for Use with 1/4" and 3/8" 

Conventional Square Drive Ratchets 

39 Pc. 1/4" and 3/8" Drive SAE/Metric Vortex 

Bit Socket Set 





89014 1/4" Vortex Bit Socket Hex 1/16" 89013D 1/4" Vortex Bit Socket T30 

89015 1/4" Vortex Bit Socket Hex 5/64" 89027 3/8" Vortex Bit Socket Hex 9/64" 




89019 1/4" Vortex Bit Socket Hex 2mm 89031 3/8" Vortex Bit Socket Hex 1/4" 

89020 1/4" Vortex Bit Socket Hex 2.5mm 89032 3/8" Vortex Bit Socket Hex 5/16" 

89021 1/4" Vortex Bit Socket Hex 3mm 89033 3/8" Vortex Bit Socket Hex 3/8" 

89001D 1/4" Vortex Bit Socket Phillips #1 89034 3/8" Vortex Bit Socket Hex 4mm 

89002D 1/4" Vortex Bit Socket Phillips #2 89035 3/8" Vortex Bit Socket Hex 5mm 

89003 1/4" Vortex Bit Socket Phillips #3 89036 3/8" Vortex Bit Socket Hex 6mm 

89004 1/4" Vortex Bit Socket Slotted 1/8" 89037 3/8" Vortex Bit Socket Hex 7mm 



89007 1/4" Vortex Bit Socket T8 89022 3/8" Vortex Bit Socket T40 


89009 1/4" Vortex Bit Socket T15 89024D 3/8" Vortex Bit Socket T47 

89010 1/4" Vortex Bit Socket T20 89025D 3/8" Vortex Bit Socket T50 


89012 1/4" Vortex Bit Socket T27 

Locking Flex GearRatchet Handles 

Cat. No. UPC No. Packaging Drive Tang Size Overall Length Head Thickness Tooth Count Product Weight Shelf Pack Qty. 

891400 082171891403 Bagged 1/4 in 6.500 in 0.335 in 72 0.28 lb 1 



416


■■Socket System Features the Vortex Drive System That Links 

Drive Tools and Sockets 

■■Pass-Thru® Socket System Eliminates the Need for Deep 

Sockets 

■■Reach Fasteners in Tight Spaces with Ease 

1/4" Drive 6 Point SAE Vortex Sockets 

Cat. No. UPC No. Packaging Fastener Size Length Product Weight Shelf Pack Qty. 

122050GR 082171220500 Carded 5/32 in 0.98 in 0.019 lb 1 













Sockets 


1/4" Drive 6 Point Metric Vortex Sockets 


522350GR 082171552359 Retail Packaging 3.5 mm 0.98 in 0.02 lb 1 

522040GR 082171220401 Retail Packaging 4 mm 0.98 in 0.02 lb 1 












XL PASS-THRU 

3 


417





Sockets 


3/8" Drive 6 Point SAE Vortex Sockets 















Sockets 


3/8" Drive 6 Point Metric Vortex Sockets 


532100GR 082171321009 Carded 10 mm 1.26 in 0.055 lb 1 










418





Sockets 


1/2" Drive 6 Point SAE Vortex® Sockets 








142320GR 082171142000 Carded 1 in 1.65 in 0.209 lb 1 

142340GR 082171144004 Carded 1-1/16 in 1.65 in 0.22 lb 1 






Sockets 


1/2" Drive 6 Point Metric Vortex® Sockets 














XL PASS-THRU 

3 


419


■■Vortex Bit Sockets Are Broached for Use with 1/4" and 3/8" 


■■Available in Hex, Torx®, Phillips, and Slotted 

1/4" Drive SAE/Metric/Torx®/Slotted/Phillips 

Vortex Bit Sockets 


Cat. No. UPC No. Packaging Drive Type Fastener Size Length Product Weight Shelf Pack Qty. 

89001D 082171890017 Carded Phillips® #1 1.34 in 0.033 lb 1 

89002D 082171890024 Carded Phillips® #2 1.34 in 0.033 lb 1 

89003 082171890031 Carded Phillips® #3 1.34 in 0.033 lb 1 

89004 082171890406 Carded Slotted 1/8 in 1.34 in 0.033 lb 1 



89007 082171890079 Carded Torx® T8 1.34 in 0.033 lb 1 






89013D 082171890130 Carded Torx® T30 1.34 in 0.033 lb 1 

89014 082171890413 Carded Hex 1/16 in 1.34 in 0.033 lb 1 





89019 082171890192 Carded Hex 2 mm 1.34 in 0.033 lb 1 

89020 082171890208 Carded Hex 2.5 mm 1.34 in 0.033 lb 1 


420


■■Vortex Bit Sockets Are Broached for Use with 1/4" and 3/8" 


■■Available in Hex, Torx®, Phillips, and Slotted 

3/8" Drive SAE/Metric/Torx® Vortex Bit 

Sockets 

Cat. No. UPC No. Packaging Drive Type Fastener Size Length Product Weight Shelf Pack Qty. 



















■■Adapter Adds Push Button Quick Release Feature 

Pass-Thru® Quick-Release Adapters 

Cat. No. UPC No. Packaging Drive Tang Size Length Product Weight Shelf Pack Qty. 




XL PASS-THRU 

3 


421


■■Pass-Thru® System Eliminates the Need for Deep Sockets 

Vortex Extensions 

Cat. No. UPC No. Packaging Drive Tang Size Length Product Weight Shelf Pack Qty. 

221060GR 082171210600 Carded 1/4 in 3 in 0.08 lb 1 






422

1/4" Drive Sets.................................... 426 

1/4" Drive Open Stock........................ 432 

3/8" Drive Sets................................... 443 


1/2" Drive Sets................................... 468 



1/4" Drive Sets.................................... 437 


3/8" Drive Sets................................... 453 


4 

1/2" Drive Sets................................... 482 


3/4" Drive Sets................................... 504 


1" Drive Open Stock........................... 514 

1-1/2" Drive Open Stock.................... 520 

I M P A C T S O C K E T S 

423


Impact Sockets 

GearWrench® offers a full range of sockets from 1/4" to 3/4" drive. Sockets are made of Chrome Molybdenum (CR-MO) that outlasts 

other alloy steels and provides the durability and hardness required for impact applications. The sockets are coated in Manganese 

Phosphate that gives up to double the protection of standard Black Oxide coatings and are laser and hard stamped with sizes for 

easy identification. Socket sets come in heavy-duty reinforced cases with steel hinges and buckles. 

IMPACT 

SOCKETS 

AVAILABLE IN: 

• 1/4" Drive • Universal Sockets 

• 3/8" Drive • Hex Sockets 

• 1/2" Drive • Adapters & Drive Tools 

• 3/4" Drive 

Reinforced molded 

cases with sizes 

marked for quick 

identification and 

storage 

Reinforced steel hinges 

for added durability 

Steel buckles 

provide security 

and strength 

I M P A C T S O C K E T S 4 

Surface Drive 

technology 

High visability laser 

etched markings 

Additional hard stamping 

(on opposite side) 

424 

Chrome Molyebdenum Alloy Steel 

(CR-MO) for exceptional strength 

and long lasting durability 

Pin hole available for use with pin and 

O-ring for secure socket retention



Armstrong ® offers a wide variety of professional Impact Sockets, Power Sockets and Accessories for just about any application. 

All are made to exacting standards with ASME and Federal Spec callouts where applicable. They are available in drive sizes ranging 

from 1/4 Dr. thru 1-1/2; openings from 3/16" through 5" and 4mm thru 65mm; and point configurations in 4 Pt, 6 Pt, 8 Pt, and 

12 Pt. All Impact Sockets, Power Sockets and Accessories are manufactured from high alloy steel using the most up-to-date 

manufacturing process (including cold forming on many sizes) and heat treat to optimize strength and durability. Available individually 

or in a selection of sets, these precision made sockets and accessories can handle just about any fastening application. 

IMPACT 

SOCKETS 

For use with impact drivers. Use with 

power drivers or hardened fasteners 

may result in excessive, premature 

wear. Approved eye protection must 

always be worn when near power 

equipment in operation. 

markings optimize 


SAE / Metric differentiation 

Socket wall dimensions are optimized to provide 

strength while retaining access to restricted fasteners 

Radius corner design engages the flats of the fastener, not the 

corners, providing up to 15% -20% more torque while reducing 

fastener rounding, enhancing the turning of worn fasteners 

True 360 degree rotation 

of the socket end for 

extended range of motion 

and smooth operation. 

Maximum operation angle 

of 30 degrees 

Manufactured from high alloy steel and most 

up-to-date manufacturing processes and 

heat treat for greater strength and durability 

4 

POWER 

SOCKETS 

For use with power drivers, not with 

impact tools. Approved eye protection 

must always be worn when near 

power equipment in operation. 

Higher hardness is 

designed to reduce 

surface wear when 

used to turn hardened 

fasteners, profile is 

designed for seat 

self-tapping screws 

Socket wall dimensions are optimized 

to provide strength while retaining 

access to restricted fasteners 

Drive end is manufactured from shock 

resistant tool steel for unequalled strength, 

toughness, and durability; higher hardness 

without brittleness 

Unique pinless 

“4 Lug” design 

for strength, 

durability, and 

safety that 

traditional ball 

and pin designs 

cannot offer 

Pin on the square drive provides 

maximum security against 

accidental disengagement of 

the socket 

True 360 degree rotation of the 

socket end for extended range of 

motion and smooth operation. 

Maximum operation angle of 30 

degrees 


425


■■Chrome Molybdenum Alloy Steel (Cr-Mo) for Exceptional 


■■Surface Drive Technology Reduces Fastener Rounding 

■■Manganese Phosphate Coating to Resist Corrosion 

■■High Visibility Laser Etched Markings 

■■Secondary Hard Stamping 

■■Includes Blow Mold Case 

■■Meets or Exceeds ASME B107.2/B107.33M 

71 Pc. 1/4" Drive 6 Point SAE/Metric Std./Deep/ 

Universal Impact Socket Set 


84903 099575849039 Case 8.50 lb 1 

I M P A C T S O C K E T S 4 1/4" 


84100 1/4" Drive 6 Point Standard Impact Socket 3/16" 





84105D 1/4" Drive 6 Point Standard Impact Socket 11/32" 





84126 1/4" Drive 6 Point Deep Impact Socket 3/16" 










84111 1/4" Drive 6 Point Standard Impact Socket 4mm 

84112 1/4" Drive 6 Point Standard Impact Socket 4.5mm 


84114 1/4" Drive 6 Point Standard Impact Socket 5.5mm 












84137 1/4" Drive 6 Point Deep Impact Socket 4mm 

84138 1/4" Drive 6 Point Deep Impact Socket 4.5mm 


84140 1/4" Drive 6 Point Deep Impact Socket 5.5mm 










84150D 1/4" Drive 6 Point Deep Impact Socket 15mm 

84152 1/4" Drive Universal Impact Socket 1/4" 






84159 1/4" Drive Universal Impact Socket 5mm 

84160 1/4" Drive Universal Impact Socket 5.5mm 









426





80101 1/4" Drive Impact Universal Joint 

84176 1/4"F x 3/8"M Impact Adapter 


84172 1/4" Drive Impact Extension 2" 











48 Pc. 1/4" Drive 6 Point SAE/Metric Std./Deep 

Impact Socket Set 


84902 099575849022 Case 2.63 lb 1 


84100 1/4" Drive 6 Point Standard Impact Socket 3/16" 84115 1/4" Drive 6 Point Standard Impact Socket 6mm 





84105D 1/4" Drive 6 Point Standard Impact Socket 11/32" 84120 1/4" Drive 6 Point Standard Impact Socket 11mm 





84126 1/4" Drive 6 Point Deep Impact Socket 3/16" 84137 1/4" Drive 6 Point Deep Impact Socket 4mm 

84127 1/4" Drive 6 Point Deep Impact Socket 7/32" 84138 1/4" Drive 6 Point Deep Impact Socket 4.5mm 


84129 1/4" Drive 6 Point Deep Impact Socket 9/32" 84140 1/4" Drive 6 Point Deep Impact Socket 5.5mm 







84111 1/4" Drive 6 Point Standard Impact Socket 4mm 84147 1/4" Drive 6 Point Deep Impact Socket 12mm 

84112 1/4" Drive 6 Point Standard Impact Socket 4.5mm 84148 1/4" Drive 6 Point Deep Impact Socket 13mm 


84114 1/4" Drive 6 Point Standard Impact Socket 5.5mm 84150D 1/4" Drive 6 Point Deep Impact Socket 15mm 

1/4" 

4 


427










20 Pc. 1/4" Drive 6 Point SAE Std./Deep Impact 

Socket Set 


84900 099575849008 Case 2.25 lb 1 



84100 1/4" Drive 6 Point Standard Impact Socket 3/16" 84126 1/4" Drive 6 Point Deep Impact Socket 3/16" 





84105D 1/4" Drive 6 Point Standard Impact Socket 11/32" 84131 1/4" Drive 6 Point Deep Impact Socket 11/32" 





428










28 Pc. 1/4" Drive 6 Point Metric Std/Deep Impact 

Socket Set 


84901 099575849015 Case 2.88 lb 1 



84112 1/4" Drive 6 Point Standard Impact Socket 4.5mm 84138 1/4" Drive 6 Point Deep Impact Socket 4.5mm 


84114 1/4" Drive 6 Point Standard Impact Socket 5.5mm 84140 1/4" Drive 6 Point Deep Impact Socket 5.5mm 










84124 1/4" Drive 6 Point Standard Impact Socket 15mm 84150D 1/4" Drive 6 Point Deep Impact Socket 15mm 

1/4" 

4 







■■Includes Plastic Socket Rail 


10 Pc. 1/4" Drive 6 Point SAE Impact Socket Set 


84906 099575849060 Carded 1.80 lb 1 


84100 1/4" Drive 6 Point Standard Impact Socket 3/16" 84105D 1/4" Drive 6 Point Standard Impact Socket 11/32" 

84101 1/4" Drive 6 Point Standard Impact Socket 7/32" 84106 1/4" Drive 6 Point Standard Impact Socket 3/8" 





429










14 Pc. 1/4" Drive 6 Point Metric Impact 

Socket Set 


84907 099575849077 Carded 2.30 lb 1 


84111 1/4" Drive 6 Point Standard Impact Socket 4mm 84118 1/4" Drive 6 Point Standard Impact Socket 9mm 

84112 1/4" Drive 6 Point Standard Impact Socket 4.5mm 84119 1/4" Drive 6 Point Standard Impact Socket 10mm 


84114 1/4" Drive 6 Point Standard Impact Socket 5.5mm 84121 1/4" Drive 6 Point Standard Impact Socket 12mm 













10 Pc. 1/4" Drive 6 Point SAE Deep Impact 

Socket Set 


84908 099575849084 Carded 1.15 lb 1 


84126 1/4" Drive 6 Point Deep Impact Socket 3/16" 84131 1/4" Drive 6 Point Deep Impact Socket 11/32" 





430










14 Pc. 1/4" Drive 6 Point Metric Deep Impact 

Socket Set 


84909 099575849091 Carded 1.58 lb 1 


84137 1/4" Drive 6 Point Deep Impact Socket 4mm 84144 1/4" Drive 6 Point Deep Impact Socket 9mm 

84138 1/4" Drive 6 Point Deep Impact Socket 4.5mm 84145 1/4" Drive 6 Point Deep Impact Socket 10mm 


84140 1/4" Drive 6 Point Deep Impact Socket 5.5mm 84147 1/4" Drive 6 Point Deep Impact Socket 12mm 



84143 1/4" Drive 6 Point Deep Impact Socket 8mm 84150D 1/4" Drive 6 Point Deep Impact Socket 15mm 






6 Pc. 1/4" Drive 6 Point SAE Universal Impact 

Socket Set 

1/4" 

4 


84904 099575849046 Carded 1.10 lb 1 


84152 1/4" Drive Universal Impact Socket 1/4" 84155 1/4" Drive Universal Impact Socket 7/16" 




431







12 Pc. 1/4" Drive 6 Point Metric Universal Impact 

Socket Set 


84905 099575849053 Carded 1.43 lb 1 


84159 1/4" Drive Universal Impact Socket 5mm 84165 1/4" Drive Universal Impact Socket 10mm 

84160 1/4" Drive Universal Impact Socket 5.5mm 84166 1/4" Drive Universal Impact Socket 11mm 







Strength and Long Lasting Durability 

■■Pin Hole for Use with Pin and O-Ring for Secure 

Socket Retention 



1/4" Drive Impact Extensions 

Cat. No. UPC No. Packaging Male Drive Size Female Drive Size Overall Length Product Weight Shelf Pack Qty. 

84172 099575841729 Carded 1/4" 1/4" 2 in 0.10 lb 1 

84173 099575841736 Carded 1/4" 1/4" 4 in 0.20 lb 1 

84174 099575841743 Carded 1/4" 1/4" 6 in 0.30 lb 1 






1/4" Drive Impact Drive Adapter 

Female Drive 

Size 

Male Drive Size 

Dim. A: Drive 

End Length Product Weight Shelf Pack Qty. 

84176 099575841767 Carded 1/4" 3/8" 0.626 in 1.000 in 0.15 lb 1 

432






1/4" Drive Impact Universal Joint 


Female Drive 

Size 


Dim. A: Drive 


80101 099575801013 Carded 1/4" 1/4" 0.62 in 1.450 in 0.28 lb 1 








1/4" Drive 6 Point SAE Standard Impact Sockets 

1/4" 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

84100 099575841002 Carded 3/16 in 0.512 in 0.335 in 0.906 in 0.13 in 0.11 in 0.393 in 0.02 lb 1 





84105D 099575841057 Carded 11/32 in 0.512 in 0.543 in 0.906 in 0.203 in 0.17 in 0.905 in 0.05 lb 1 





Product 

Weight 

Shelf Pack 

Qty. 

4 


433









1/4" Drive 6 Point Metric Impact Sockets 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

84111 099575841118 Carded 4 mm 0.512 in 0.335 in 0.906 in 0.11 in 0.11 in 0.393 in 0.03 lb 1 

84112 099575841125 Carded 4.5 mm 0.512 in 0.335 in 0.906 in 0.11 in 0.11 in 0.393 in 0.04 lb 1 





















Product 

Weight 

1/4" Drive 6 Point SAE Deep Impact Sockets 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 











Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

434









1/4" Drive 6 Point Metric Deep Impact Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 














84150D 099575841507 Carded 15 mm 0.512 in 0.827 in 1.968 in 0.407 in 0.295 in 1.968 in 0.19 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

1/4" 

4 








1/4" Drive 6 Point SAE Universal Impact Sockets 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 







Product 

Weight 

Shelf Pack 

Qty. 


435








1/4" Drive 6 Point Metric Universal 




Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 













Product 

Weight 

Shelf Pack 

Qty. 

436




■■Radius Corner Design Engages the Flats of the Fastener, Not the 

Corners, Providing Up to 15%-20% More Torque While Reducing 

Fastener Rounding, Enhancing the Turning of Worn Fasteners 



■■Socket Wall Dimensions Are Optimized to Provide Strength While 





■■Meets or Exceeds ASME Specification B107.2-2002 and US 

Federal Specification GGG-W-660a 


18-890 781412188905 Boxed 0.63 lb 1 


16-831 9" Socket Rail Steel 18-611 1/4" Drive 6 Point Impact Socket 11/32" 

16-841 1/4" Drive Socket Clips Steel 18-612 1/4" Drive 6 Point Impact Socket 3/8" 

18-606 1/4" Drive 6 Point Impact Socket 3/16" 18-614 1/4" Drive 6 Point Impact Socket 7/16" 





1/4" 












■■Meets or Exceeds ASME Specification B107.33M-2002 

12 Pc. 1/4" Drive 6 Point Metric Impact Socket Set 


45-890 781412458909 Boxed 0.73 lb 1 


16-831 9" Socket Rail Steel 45-009 1/4" Drive 6 Point Impact Socket 9mm 

16-841 1/4" Drive Socket Clips Steel 45-010 1/4" Drive 6 Point Impact Socket 10mm 

45-004 1/4" Drive 6 Point Impact Socket 4mm 45-011 1/4" Drive 6 Point Impact Socket 11mm 


45-083 1/4" Drive 6 Point Impact Socket 5.5mm 45-013 1/4" Drive 6 Point Impact Socket 13mm 




4 


437


■■Incorporates a Pin on the Square Drive Providing Maximum 

Security Against Accidental Disengagement of the 

Socket, Safety 

■■Socket is Securely Locked to the Extension and Will 

Not Disengage Until Knurled Sleeve is Pulled, Safety 

and Convenience 




5 Pc. 1/4" Drive Impact Locking Extension Set 

Cat. No. UPC No. Packaging Male Drive Size Female Drive Size Product Weight Shelf Pack Qty. 

18-940 781412189407 Boxed 1/4" 1/4" 0.75 lb 1 


18-935 1/4" Drive Impact Locking Extension 3" 18-938 1/4" Drive Impact Locking Extension 18" 


18-937 1/4" Drive Impact Locking Extension 12" 


1/4" Drive Power Extensions 









18-921 781412189216 Bagged 1/4" 1/4" 2.000 in 0.05 lb 1 

18-923 781412189230 Bagged 1/4" 1/4" 6.000 in 0.15 lb 1 






Not Disengage Until Knurled Sleeve is Pulled, Safety and 

Convenience 




1/4" Drive Locking Impact Extension 


18-935 781412189353 Bagged 1/4" 1/4" 3.000 in 0.10 lb 1 

18-936 781412189360 Bagged 1/4" 1/4" 6.000 in 0.20 lb 1 

18-937 781412189377 Bagged 1/4" 1/4" 12.000 in 0.40 lb 1 

18-938 781412189384 Bagged 1/4" 1/4" 18.000 in 0.57 lb 1 

18-939 781412189391 Bagged 1/4" 1/4" 24.000 in 0.76 lb 1 

438



■■Designed for Use with Electric or Air Driven Power Tools; Not for 

Use with Impact Power Tools 

■■Higher Hardness is Designed to Reduce Surface Wear When 

Used to Turn Hardened Fasteners, Thin Wall Design for Access 

to Restricted Fasteners 






■■Meets or Exceeds ASME B107.3 and US Federal 

Spec. GGG-W-660A 

1/4" Drive 6 Point SAE Thin Wall Power Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 







18-012 781412180121 Bagged 3/8 in 0.555 in 0.555 in 0.820 in - 0.500 in - 0.03 lb 1 



Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/4" 





Used to Turn Hardened Fasteners, Profile with Magnet is 

Designed Retain and Seat Self-Tapping Screws 





Durability 

1/4" Drive 6 Point SAE Magnetic Power Sockets For 

Self-Tapping Screws 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Product 

Weight 



18-080 781412180800 Bagged 5/16 in 0.500 in 0.500 in 1.000 in 0.190 in - 0.03 lb 1 





Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

4 


439






Used to Turn Hardened Fasteners, Thin Wall Design for Access 

to Restricted Fasteners 





Durability 

■■Meets or Exceeds ASME B107.3 and US Federal Spec. GGG-W- 

660A 

1/4" Drive 6 Point SAE Deep Thin Wall Power Sockets 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




18-210D 781412182101 Bagged 5/16 in 0.450 in 0.450 in 1.940 in 0.200 in 0.680 in - 0.06 lb 1 





Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

440












Durability 


GGG-W-660A 

1/4" Drive 6 Point SAE Impact Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 












Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/4" 

4 


441












Durability 




Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

45-004 781412450040 Bagged 4 mm 0.500 in 0.264 in 0.846 in 0.126 in 0.299 in 0.295 in 0.03 lb 1 





45-009 781412450095 Bagged 9 mm 0.531 in 0.531 in 0.874 in 0.240 in 0.374 in - 0.05 lb 1 







45-083 781412450835 Bagged 5.5 mm 0.850 in 0.850 in 1.000 in 0.591 in 0.626 in - 0.03 lb 1 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

442










44 Pc. 3/8" Drive 6 Point SAE/Metric Std./Deep 

Impact Socket Set 


84916 099575849169 Case 10.88 lb 1 





84303 3/8" Drive 6 Point Standard Impact Socket 1/2" 84318D 3/8" Drive 6 Point Standard Impact Socket 17mm 


84305 3/8" Drive 6 Point Standard Impact Socket 5/8" 84320D 3/8" Drive 6 Point Standard Impact Socket 19mm 

84306 3/8" Drive 6 Point Standard Impact Socket 11/16" 84331 3/8" Drive 6 Point Deep Impact Socket 8mm 

84307 3/8" Drive 6 Point Standard Impact Socket 3/4" 84332 3/8" Drive 6 Point Deep Impact Socket 9mm 


84323D 3/8" Drive 6 Point Deep Impact Socket 3/8" 84334 3/8" Drive 6 Point Deep Impact Socket 11mm 










84312 3/8" Drive 6 Point Standard Impact Socket 11mm 84406 3/8" Drive Impact Extension Bar 3" 



3 / 8 " 

4 


443












84910 099575849107 Carded 1.10 lb 1 






3 / 8 " 











Socket Set 


84911 099575849114 Carded 1.60 lb 1 





84312 3/8" Drive 6 Point Standard Impact Socket 11mm 84318D 3/8" Drive 6 Point Standard Impact Socket 17mm 



444











Socket Set 


84915 099575849152 Carded 2.11 lb 1 



84323D 3/8" Drive 6 Point Deep Impact Socket 3/8" 84327 3/8" Drive 6 Point Deep Impact Socket 5/8" 

84324 3/8" Drive 6 Point Deep Impact Socket 7/16" 84328D 3/8" Drive 6 Point Deep Impact Socket 11/16" 

84325D 3/8" Drive 6 Point Deep Impact Socket 1/2" 84329 3/8" Drive 6 Point Deep Impact Socket 3/4" 










Socket Set 

3 / 8 " 

4 


84914 099575849145 Carded 3.58 lb 1 










445











7 Pc. 3/8" Drive SAE Impact Hex Bit Socket Set 


84913 099575849138 Carded 1.50 lb 1 


84397 3/8" Drive Impact Hex Socket 3/16" 84401 3/8" Drive Impact Hex Socket 3/8" 



84400D 3/8" Drive Impact Hex Socket 5/16" 

3 / 8 " 











7 Pc. 3/8" Drive Metric Impact Hex Bit Socket Set 


84912 099575849121 Carded 1.50 lb 1 


84389 3/8" Drive Impact Hex Socket 4mm 84393 3/8" Drive Impact Hex Socket 8mm 



84392 3/8" Drive Impact Hex Socket 7mm 

446







8 Pc. 3/8" Drive 6 Point SAE Impact Universal 

Socket Set 


84917 099575849176 Case 5.40 lb 1 


84345D 3/8" Drive Universal Impact Socket 5/16" 84349 3/8" Drive Universal Impact Socket 9/16" 









15 Pc. 3/8" Drive 6 Point Metric Impact Universal 

Socket Set 

3 / 8 " 

4 


84918 099575849183 Case 8.22 lb 1 











447




■■Pin Hole for Use with Pin and O-Ring for Secure Socket 

Retention 





84406 099575844065 Carded 3/8" 3/8" 3 in 0.18 lb 1 

84407 099575844072 Carded 3/8" 3/8" 6 in 0.34 lb 1 

84405 099575844058 Carded 3/8" 3/8" 10 in 0.53 lb 1 






3 / 8 " 


Female Drive 

Size 


Dim. A: Drive 


84408 099575844089 Carded 3/8" 1/2" 0.87 in 1.500 in 0.13 lb 1 








Female Drive 

Size 


Dim. A: Drive 


80548 099575805486 Carded 3/8" 3/8" 0.95 in 2.090 in 0.22 lb 1 

448











Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 









Product 

Weight 

Shelf Pack 

Qty. 










Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 













Product 

Weight 

Shelf Pack 

Qty. 

3 / 8 " 

4 


449











Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 









Product 

Weight 

Shelf Pack 

Qty. 

3 / 8 " 











Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 














Product 

Weight 

Shelf Pack 

Qty. 

450





Retention 





3/8" Drive SAE Impact Hex Bit Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Dim. E: 

Length to 

Shoulder 

84397 099575843976 Carded 3/16 in 0.83 in 0.19 in 1.97 in 0.22 in 0.59 in 0.14 lb 1 



84400D 099575844003 Carded 5/16 in 0.83 in 0.31 in 1.97 in 0.36 in 0.59 in 0.16 lb 1 




Product 

Weight 

Shelf Pack 

Qty. 




Retention 





3/8" Drive Metric Impact Hex Bit Sockets 

3 / 8 " 

4 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Dim. E: 

Length to 

Shoulder 

84389 099575843891 Carded 4 mm 0.83 in 0.16 in 1.97 in 0.18 in 0.57 in 0.14 lb 1 







Product 

Weight 

Shelf Pack 

Qty. 


451










Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 









Product 

Weight 

Shelf Pack 

Qty. 

3 / 8 " 









3/8" Drive 6 Point Metric Impact 

Universal Sockets 

Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 
















Product 

Weight 

Shelf Pack 

Qty. 

452

















19-890 781412198904 Boxed 1.00 lb 1 








3 / 8 " 

9 Pc. 3/8" Drive 6 Point SAE Deep Impact Socket Set 















19-895 781412198959 Boxed 1.25 lb 1 


16-831 9" Socket Rail Steel 19-716 3/8" Drive 6 Point Deep Impact Socket 1/2" 

16-843 3/8" Drive Socket Clips Steel 19-718 3/8" Drive 6 Point Deep Impact Socket 9/16" 

19-708 3/8" Drive 6 Point Deep Impact Socket 1/4" 19-720 3/8" Drive 6 Point Deep Impact Socket 5/8" 




4 


453



■■Unique Pinless "4 Lug" Design for Strength, Durability, 

and Safety 

■■True 360 Degree Rotation of the Socket End for Extended Range 

of Motion and Smooth Operation 

■■Reversed Ball Design Allows for A Smaller Socket End for 

Access to Restricted Fasteners 















Socket Set 


19-894 781412198942 Boxed 2.00 lb 1 

3 / 8 " 



16-831 9" Socket Rail Steel 19-568 3/8" Drive 6 Point Armstrong MAXX Universal Impact Socket 9/16" 

16-843 3/8" Drive Socket Clips Steel 19-570 3/8" Drive 6 Point Armstrong MAXX Universal Impact Socket 5/8" 

19-562 3/8" Drive 6 Point Armstrong MAXX Universal Impact Socket 3/8" 19-572 3/8" Drive 6 Point Armstrong MAXX Universal Impact Socket 11/16" 


19-566 3/8" Drive 6 Point Armstrong MAXX Universal Impact Socket 1/2" 

454












Durability 




46-891 781412468915 Boxed 1.60 lb 1 











3 / 8 " 















46-890 781412468908 Boxed 0.09 lb 1 









4 


455















Socket Set 


46-898 781412468984 Boxed 2.92 lb 1 


3 / 8 " 


16-831 9" Socket Rail Steel 46-712 3/8" Drive 6 Point Deep Impact Socket 12mm 

16-843 3/8" Drive Socket Clips Steel 46-713 3/8" Drive 6 Point Deep Impact Socket 13mm 

46-707 3/8" Drive 6 Point Deep Impact Socket 7mm 46-714 3/8" Drive 6 Point Deep Impact Socket 14mm 





456




and Safety 


















Socket Set 


46-910 781412469103 Boxed 2.70 lb 1 


16-831 9" Socket Rail Steel 46-114 3/8" Drive 6 Point MAXX Impact Universal Socket 14mm 

16-843 3/8" Drive Socket Clips Steel 46-115 3/8" Drive 6 Point MAXX Impact Universal Socket 15mm 

46-110 3/8" Drive 6 Point MAXX Impact Universal Socket 10mm 46-116 3/8" Drive 6 Point MAXX Impact Universal Socket 16mm 




3 / 8 " 

4 


■■Incorporates A Pin on the Square Drive Providing Maximum 





Convenience 




3 Pc. 3/8" Drive Locking Impact Extension Set 


19-940 781412199406 Boxed 3/8" 3/8" 13.30 lb 1 



19-936 3/8" Drive Impact Locking Extension 6" 


457











Spec. GGG-W-660A6 


19-922 781412199222 Bagged 3/8" 3/8" 3.000 in 0.18 lb 1 

19-923 781412199239 Bagged 3/8" 3/8" 6.000 in 1.00 lb 1 

3 / 8 " 












3/8" Drive Locking Impact Extensions 


19-935 781412199352 Bagged 3/8" 3/8" 3.000 in 0.25 lb 1 

19-936 781412199369 Bagged 3/8" 3/8" 6.000 in 0.40 lb 1 

19-937 781412199376 Bagged 3/8" 3/8" 12.000 in 0.73 lb 1 



and Safety 














3/8" Drive Maxx Impact Universal Joint 


Female Drive 

Size 


Dim. A: Drive 


19-947 781412199475 Bagged 3/8" 3/8" 0.383 in 1.938 in 0.20 lb 1 

458













Female Drive 

Size 


Dim. A: Drive 


19-952 781412199529 Bagged 3/8" 1/2" 0.383 in 1.375 in 1.38 lb 1 

19-952A 781412195293 Bagged 3/8" 1/2" - 0.625 in 1.30 lb 1 














3 / 8 " 

4 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Product 

Weight 






Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 


459












Durability 


GGG-W-660A 


3 / 8 " 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 














19-632 781412196320 Bagged 1 in 1.438 in 1.438 in 1.250 in 0.672 in 0.625 in - 0.38 lb 1 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

460












Durability 


GGG-W-660A 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 
















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

3 / 8 " 

4 


461











GGG-W-660A 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





Product 

Weight 

Shelf Pack 

Qty. 

3 / 8 " 














GGG-W-660A 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 













Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

462




and Safety 

















GGG-W-660A 

3/8" Drive 6 Point SAE Maxx Impact Universal 

Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Dim. D: Bolt 

Clearance 

Product 

Weight 








Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Shelf Pack 

Qty. 

3 / 8 " 

4 


463















3 / 8 " 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

464















Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

3 / 8 " 

4 


465















3 / 8 " 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

46-308D 781412463088 Bagged 8 mm 0.693 in 0.516 in 1.102 in 0.256 in 0.197 in 0.433 in 0.07 lb 1 



46-311D 781412463118 Bagged 11 mm 0.693 in 0.693 in 1.102 in 0.335 in 0.236 in - 0.70 lb 1 












Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

466




and Safety 

















3/8" Drive 6 Point Metric Maxx Impact 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Dim. D: Bolt 

Clearance 

Product 

Weight 

46-110 781412461107 Bagged 10 mm 0.969 in 0.610 in 2.189 in 0.500 in 0.500 in 4.00 lb 1 










Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Shelf Pack 

Qty. 

3 / 8 " 

4 


467












84932 099575849329 Case 10.24 lb 1 

1/2" 


84500D 1/2" Drive 6 Point Standard Impact Socket 3/8" 84510D 1/2" Drive 6 Point Standard Impact Socket 1" 

84501 1/2" Drive 6 Point Standard Impact Socket 7/16" 84511D 1/2" Drive 6 Point Standard Impact Socket 1-1/16" 



84504D 1/2" Drive 6 Point Standard Impact Socket 5/8" 84514D 1/2" Drive 6 Point Standard Impact Socket 1-1/4" 





84509D 1/2" Drive 6 Point Standard Impact Socket 15/16" 












84931 099575849312 Case 3.88 lb 1 


84500D 1/2" Drive 6 Point Standard Impact Socket 3/8" 84506D 1/2" Drive 6 Point Standard Impact Socket 3/4" 




84504D 1/2" Drive 6 Point Standard Impact Socket 5/8" 84510D 1/2" Drive 6 Point Standard Impact Socket 1" 


468











Socket Set 


84933 099575849336 Case 11.14 lb 1 



84521D 1/2" Drive 6 Point Standard Impact Socket 9mm 84534 1/2" Drive 6 Point Standard Impact Socket 22mm 












1/2" 

4 










Socket Set 


84930 099575849305 Case 2.98 lb 1 



84521D 1/2" Drive 6 Point Standard Impact Socket 9mm 84527D 1/2" Drive 6 Point Standard Impact Socket 15mm 






469











Socket Set 


84934 099575849343 Case 14.91 lb 1 

1/2" 


84546 1/2" Drive 6 Point Deep Impact Socket 3/8" 84556 1/2" Drive 6 Point Deep Impact Socket 1" 

84547 1/2" Drive 6 Point Deep Impact Socket 7/16" 84557 1/2" Drive 6 Point Deep Impact Socket 1-1/16" 





84552D 1/2" Drive 6 Point Deep Impact Socket 3/4" 84563 1/2" Drive 6 Point Deep Impact Socket 1-7/16" 


84554D 1/2" Drive 6 Point Deep Impact Socket 7/8" 84559 1/2" Drive 6 Point Deep Impact Socket 1-13/16" 

84555D 1/2" Drive 6 Point Deep Impact Socket 15/16" 











Socket Set 


84942 099575849428 Case 7.92 lb 1 






84550 1/2" Drive 6 Point Deep Impact Socket 5/8" 84556 1/2" Drive 6 Point Deep Impact Socket 1" 


470











Socket Set 


84935 099575849350 Case 20.56 lb 1 











84575D 1/2" Drive 6 Point Deep Impact Socket 17mm 84590D 1/2" Drive 6 Point Deep Impact Socket 32mm 

84576D 1/2" Drive 6 Point Deep Impact Socket 18mm 84591 1/2" Drive 6 Point Deep Impact Socket 33mm 





1/2" 

4 


471











Socket Set 


84944 099575849442 Case 6.00 lb 1 

1/2" 












Retention 








84941 099575849411 Carded 2.07 lb 1 





84637 1/2" Drive Impact Hex Socket 9/16" 

472











7 Pc. 1/2" Drive Metric Impact Hex Bit Socket Set 


84940 099575849404 Carded 1.87 lb 1 





84629 1/2" Drive Impact Hex Socket 12mm 








Socket Set 

1/2" 

4 


84938 099575849381 Case 7.90 lb 1 


84596D 1/2" Drive Impact Universal Socket 1/2" 84603 1/2" Drive Impact Universal Socket 15/16" 

84597 1/2" Drive Impact Universal Socket 9/16" 84604 1/2" Drive Impact Universal Socket 1" 

84598 1/2" Drive Impact Universal Socket 5/8" 84605 1/2" Drive Impact Universal Socket 1-1/16" 




84602 1/2" Drive Impact Universal Socket 7/8" 


473









Socket Set 


84939 099575849398 Case 7.85 lb 1 

1/2" 


84610 1/2" Drive Impact Universal Socket 10mm 84618 1/2" Drive Impact Universal Socket 18mm 







84617 1/2" Drive Impact Universal Socket 17mm 










84645 099575846458 Carded 1/2" 1/2" 3 in 0.33 lb 1 

84646 099575846465 Carded 1/2" 1/2" 5 in 0.45 lb 1 

84644 099575846441 Carded 1/2" 1/2" 10 in 0.90 lb 1 







Female Drive 

Size 


Dim. A: Drive 


84643 099575846434 Carded 1/2" 3/8" 1.00 in 1.500 in 0.16 lb 1 

474








Female Drive 

Size 


Dim. A: Drive 


80671 099575806711 Carded 1/2" 1/2" 1.08 in 2.530 in 0.33 lb 1 









1/2" 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 











84510D 099575845109 Carded 1 in 1.417 in 1.417 in 1.496 in 0.656 in 0.49 in 1.496 in 0.41 lb 1 

84511D 099575845116 Carded 1-1/16 in 1.496 in 1.496 in 1.575 in 0.687 in 0.49 in 1.574 in 0.46 lb 1 






84517D 099575845178 Carded 1-7/16 in 1.496 in 1.890 in 1.693 in 1 in 0.748 in 1.692 in 0.75 lb 1 


Product 

Weight 

Shelf Pack 

Qty. 

4 


475










1/2" 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 


























Product 

Weight 

Shelf Pack 

Qty. 

476











Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 











84556 099575845567 Carded 1 in 1.417 in 1.417 in 3.071 in 0.656 in 0.49 in 3.07 in 0.85 lb 1 

84557 099575845574 Carded 1-1/16 in 1.496 in 1.496 in 3.071 in 0.687 in 0.49 in 3.07 in 0.92 lb 1 





84563 099575845635 Carded 1-7/16 in 1.496 in 1.890 in 3.071 in 1 in 0.748 in 3.07 in 1.24 lb 1 



Product 

Weight 

Shelf Pack 

Qty. 

1/2" 

4 


477










1/2" 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 






























Product 

Weight 

Shelf Pack 

Qty. 

478





Retention 





1/2" Drive SAE Impact Hex Bit Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Dim. E: 

Length to 

Shoulder 








Product 

Weight 

Shelf Pack 

Qty. 




Retention 






1/2" 

4 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: Nose 

Diameter 

Dim. C: 

Overall 

Length 

Dim. D: Bit 

Length 

Dim. E: 

Length to 

Shoulder 








Product 

Weight 

Shelf Pack 

Qty. 


479










1/2" 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 














Product 

Weight 

Shelf Pack 

Qty. 


480









1/2" Drive 6 Point Metric Universal 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 
















Product 

Weight 

Shelf Pack 

Qty. 

1/2" 

4 


481

















20-889 781412208894 Boxed 1.54 lb 1 






1/2" 

















20-897D 781412208979 Boxed 2.70 lb 1 


16-831 9" Socket Rail Steel 20-222 1/2" Drive 6 Point Deep Impact Socket 11/16" 

16-845 1/2" Drive Socket Clips Steel 20-224 1/2" Drive 6 Point Deep Impact Socket 3/4" 




482




and Safety 



















Socket Set 


20-899D 781412208993 Boxed 0.64 lb 1 


16-834 13" Socket Rail Steel 20-574 1/2" Drive 6 Point Armstrong MAXX Universal Impact Socket 3/4" 

16-845 1/2" Drive Socket Clips Steel 20-576 1/2" Drive 6 Point Armstrong MAXX Universal Impact Socket 13/16" 



20-570 1/2" Drive 6 Point Armstrong MAXX Universal Impact Socket 5/8" 20-582 1/2" Drive 6 Point Armstrong MAXX Universal Impact Socket 1" 

20-572 1/2" Drive 6 Point Armstrong MAXX Universal Impact Socket 11/16" 

1/2" 

4 


483

















20-893 781412208931 Boxed 22.90 lb 1 

1/2" 



16-845 1/2" Drive Socket Clips Steel 20-028D 1/2" Drive 6 Point Impact Socket 7/8" 


20-018 1/2" Drive 6 Point Impact Socket 9/16" 20-032 1/2" Drive 6 Point Impact Socket 1" 

20-020 1/2" Drive 6 Point Impact Socket 5/8" 20-034D 1/2" Drive 6 Point Impact Socket 1-1/16" 

















11 Pc. 1/2" Drive 6 Point SAE Impact Socket Set with 



20-894 781412208948 Boxed 5.10 lb 1 


16-838 15" Socket Rail Red Plastic 20-026 1/2" Drive 6 Point Impact Socket 13/16" 

16-848 1/2" Drive Socket Clip 20-028D 1/2" Drive 6 Point Impact Socket 7/8" 


20-018 1/2" Drive 6 Point Impact Socket 9/16" 20-032 1/2" Drive 6 Point Impact Socket 1" 




484





20-891A 781412208917 Boxed 5.42 lb 1 


20-012A 1/2" Drive 6 Point Impact Socket 3/8" 20-026A 1/2" Drive 6 Point Impact Socket 13/16" 



20-018A 1/2" Drive 6 Point Impact Socket 9/16" 20-032A 1/2" Drive 6 Point Impact Socket 1" 

20-020A 1/2" Drive 6 Point Impact Socket 5/8" 20-034A 1/2" Drive 6 Point Impact Socket 1-1/16" 





1/2" 

4 


20-895A 781412208955 Boxed 7.53 lb 1 


20-212A 1/2" Drive 6 Point Deep Impact Socket 3/8" 20-226A 1/2" Drive 6 Point Deep Impact Socket 13/16" 



20-218A 1/2" Drive 6 Point Deep Impact Socket 9/16" 20-232A 1/2" Drive 6 Point Deep Impact Socket 1" 

20-220A 1/2" Drive 6 Point Deep Impact Socket 5/8" 20-234A 1/2" Drive 6 Point Deep Impact Socket 1-1/16" 




485
















47-893 781412478938 Boxed 4.20 lb 1 








1/2" 















Socket Set 


47-897 781412478976 Boxed 8.30 lb 1 


16-835 17" Socket Rail Steel 47-216 1/2" Drive 6 Point Deep Impact Socket 16mm 

16-845 1/2" Drive Socket Clips Steel 47-217 1/2" Drive 6 Point Deep Impact Socket 17mm 

47-210D 1/2" Drive 6 Point Deep Impact Socket 10mm 47-218 1/2" Drive 6 Point Deep Impact Socket 18mm 





47-215D 1/2" Drive 6 Point Deep Impact Socket 15mm 47-224 1/2" Drive 6 Point Deep Impact Socket 24mm 

486




and Safety 


















Socket Set 


47-913 781412479133 Boxed 6.10 lb 1 








47-114D 1/2" Drive 6 Point MAXX Impact Universal Socket 14mm 47-124 1/2" Drive 6 Point MAXX Impact Universal Socket 24mm 

47-115D 1/2" Drive 6 Point MAXX Impact Universal Socket 15mm 

1/2" 

4 











3 Pc. 1/2" Drive Locking Impact Extension Set 


20-940 781412209402 Boxed 1/2" 1/2" 2.05 lb 1 



20-935D 1/2" Drive Impact Locking Extension 3" 20-937D 1/2" Drive Impact Locking Extension 10" 

20-936D 1/2" Drive Impact Locking Extension 5" 

487













20-922A 781412202298 Bagged 1/2" 1/2" 3.000 in 0.34 lb 1 

20-923D 781412209235 Bagged 1/2" 1/2" 5.000 in 0.97 lb 1 

20-923A 781412209327 Bagged 1/2" 1/2" 6.000 in 1.00 lb 1 

20-924D 781412209242 Bagged 1/2" 1/2" 10.000 in 1.52 lb 1 

1/2" 












1/2" Drive Locking Impact Extensions 


20-935D 781412209358 Bagged 1/2" 1/2" 3.000 in 0.35 lb 1 

20-936D 781412209365 Bagged 1/2" 1/2" 5.000 in 0.57 lb 1 

20-937D 781412209372 Bagged 1/2" 1/2" 10.000 in 1.05 lb 1 



and Safety 














1/2" Drive Maxx Impact Universal Joint 


Female Drive 

Size 


Dim. A: Drive 


20-947D 781412209471 Bagged 1/2" 1/2" 0.511 in 2.594 in 0.42 lb 1 

488




Security Against Accidental Disengagement of the Socket for 

Increased Safety 






1/2" Drive Impact Drive Adapters 


Female Drive 

Size Male Drive Size 

Dim. A: Drive 


20-951A 781412205190 Bagged 1/2" 3/8" - - 0.15 lb 1 


20-952A 781412205299 Bagged 1/2" 3/4" - - 0.28 lb 1 








1/2" Drive Power Hex Square Shank 

Cat. No. UPC No. Packaging Male Drive Size Dim. A: Drive End Length Product Weight Shelf Pack Qty. 

20-959D 781412209594 Bagged 1/2" 0.511 in 2.750 in 0.18 lb 1 

1/2" 

4 















Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Product 

Weight 





Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 


489












Durability 


GGG-W-660A 


1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 












20-034D 781412200348 Bagged 1-1/16 in 1.490 in 1.490 in 1.752 in 0.813 in 0.600 in - 0.50 lb 1 


20-038 781412200386 Bagged 1-3/16 in 1.640 in 1.640 in 2.032 in 0.781 in 0.820 in - 0.70 lb 1 






Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

490












Durability 


GGG-W-660A 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/2" 

4 


491











GGG-W-660A 


1/2" 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 














Product 

Weight 

Shelf Pack 

Qty. 











GGG-W-660A 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 











Product 

Weight 

Shelf Pack 

Qty. 

492












Durability 


GGG-W-660A 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/2" 

4 


493












Durability 


GGG-W-660A 


1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

494



■■Unique Pinless "4 Lug" Design for Strength, Durability, and 

Safety 















Durability 


GGG-W-660A 

1/2" Drive 6 Point SAE Maxx Impact Universal 

Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Dim. D: Bolt 

Clearance 

Product 

Weight 

20-564D 781412205640 Bagged 7/16 in 0.969 in 0.700 in 2.812 in 0.984 in 0.984 in 0.27 lb 1 










Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Shelf Pack 

Qty. 

1/2" 

4 


495












Durability 



1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 





























Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

496












Durability 



Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 




























Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/2" 

4 


497












Durability 



1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 


















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

498




and Safety 

















1/2" Drive 6 Point Metric Maxx Impact 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench End 

Dim. D: Bolt 

Clearance 

Product 

Weight 





47-114D 781412471144 Bagged 14 mm 0.969 in 0.827 in 2.811 in 0.984 in 0.984 in 0.36 lb 1 

47-115D 781412471151 Bagged 15 mm 0.969 in 0.874 in 2.811 in 0.984 in 0.984 in 0.37 lb 1 








Dim. C: 

Overall 

Length 

Dim. E: 

Wrench 

Depth 

Shelf Pack 

Qty. 

1/2" 

4 


499










84885 099575848858 Carded 3/4" 3/4" 6 in 1.84 lb 1 

84886 099575848865 Carded 3/4" 3/4" 10 in 2.65 lb 1 







Female Drive 

Size 


Dim. A: Drive 


84888D 099575848889 Carded 3/4" 1/2" 1.5 in 2.126 in 0.83 lb 1 

84887 099575848872 Carded 3/4" 1" 1.5 in 2.626 in 1.30 lb 1 


500











Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





























Product 

Weight 

Shelf Pack 

Qty. 

4 


501












Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

































Product 

Weight 

Shelf Pack 

Qty. 

502











Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 
















84878 099575848780 Carded 1-11/16 1.732 in 2.441 in 2.441 in 1.187 in 0.97 in 3.543 in 2.25 lb 1 






Product 

Weight 

Shelf Pack 

Qty. 

4 


503














■■Meets or Exceeds ASME Specification B107.2-2002 and 

US Federal Specification GGG-W-660a 


21-893 781412218930 Boxed 15.10 lb 1 

1/2" 


16-835 17" Socket Rail Steel 21-036 3/4" Drive 6 Point Impact Socket 1-1/8" 

16-847 3/4" Drive Socket Clips Steel 21-038D 3/4" Drive 6 Point Impact Socket 1-3/16" 

21-024D 3/4" Drive 6 Point Impact Socket 3/4" 21-040 3/4" Drive 6 Point Impact Socket 1-1/4" 


21-028 3/4" Drive 6 Point Impact Socket 7/8" 21-044 3/4" Drive 6 Point Impact Socket 1-3/8" 

21-030D 3/4" Drive 6 Point Impact Socket 15/16" 21-046 3/4" Drive 6 Point Impact Socket 1-7/16" 

21-032 3/4" Drive 6 Point Impact Socket 1" 21-048 3/4" Drive 6 Point Impact Socket 1-1/2" 

21-034 3/4" Drive 6 Point Impact Socket 1-1/16" 21-052 3/4" Drive 6 Point Impact Socket 1-5/8" 





■■Two Piece Design Allows Bits to Be Easily Replaced for Like New 

Operation; Not Possible with One Piece Designs 






21-899 781412218992 Boxed 4.66 lb 1 


16-831 9" Socket Rail Steel 21-721 3/4" Drive Impact Hex Bit Socket 3/4" 

16-847 3/4" Drive Socket Clips Steel 21-723 3/4" Drive Impact Hex Bit Socket 7/8" 

21-718 3/4" Drive Impact Hex Bit Socket 9/16" 21-725 3/4" Drive Impact Hex Bit Socket 1" 

21-719 3/4" Drive Impact Hex Bit Socket 5/8" 

504
















48-893 781412488937 Boxed 23.00 lb 1 











■■Incorporates A Through Hole on the Square Drive for Use with 

Retaining Rings / Pins 







21-923 781412219234 Bagged 3/4" 3/4" 7.000 in 1.59 lb 1 

21-924 781412219241 Bagged 3/4" 3/4" 10.000 in 2.10 lb 1 

21-925 781412219258 Bagged 3/4" 3/4" 13.000 in 2.95 lb 1 











1/2" 

4 


Cat. No. UPC No. Packaging Female Drive Size Male Drive Size Dim. A: Drive End Length Product Weight Shelf Pack Qty. 

21-947 781412219470 Bagged 3/4" 3/4" 0.758 in 3.313 in 1.29 lb 1 

505












Cat. No. UPC No. Packaging Female Drive Size Male Drive Size Dim. A: Drive End Length Product Weight Shelf Pack Qty. 

21-951 781412219517 Bagged 3/4" 1/2" 0.758 in 2.094 in 0.62 lb 1 

21-952 781412219524 Bagged 3/4" 1" 0.758 in 2.500 in 0.82 lb 1 

21-953 781412219531 Bagged 3/4" 5/8" - 2.125 in 0.49 lb 1 

1/2" 


3/4" Drive Ret Rings 


■■The Ret Ring® is A Tool Accessory Used to Attached Large 

Impact Sockets to the Square Drive Anvil on High Speed Impact 

Wrenches. 

■■One Piece Designed Replaces Separate Pins and O-Rings 

■■Molded in Polyurethane Plastic with A Hardened Resin Insert 

That Securely Holds the Socket in Place When Operating Impact 

Wrenches That Can Reach Free Speeds in Excess of 5000 RPM. 

Cat. No. UPC No. Packaging Used with Armstrong Product 

Product 

Weight 

Shelf Pack 

Qty. 

21-964 781412219647 Bagged 

21-016 through 21-038, 21-218 through 21-238, 21-420 through 21-432, 21-718 through 21-719, 

48-019 through 48-030, 48-221 through 48-230, 48-719 through 48-722, 21-923 through 21-953 

0.02 lb 1 

21-965 781412219654 Bagged 

21-040 through 21-048, 21-240 through 21-254, 21-434 through 21-466, 21-505, 48-032 

through 48-036, 48-232 through 48-241, 48-724 through 48-725, 21-721 through 21-723 

0.02 lb 1 

21-967 781412219678 Bagged 21-052 through 21-064, 21-256 through 21-264, 48-041 through 48-050, 48-726, 21-725 0.03 lb 1 

3/4" Drive O-Ring 

Cat. No. UPC No. Packaging Used with Armstrong Product Product Weight Shelf Pack Qty. 

21-962 781412219623 Bagged 1-7/16 " Diameter O-Ring 0.01 lb 5 


3/4" Drive Retainer Pin 


21-963 781412219630 Bagged 1-1/2" Long Retainer Pin 3/16 Diameter 0.03 lb 5 

506













■■Meets or Exceeds ASME B107.2-2002 and US Federal 



Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 












21-038D 781412210385 Bagged 1-3/16 in 1.750 in 1.875 in 2.125 in 1.062 in 0.750 in 1.425 in 1.00 lb 1 

21-040 781412210408 Bagged 1-1/4 in 1.750 in 2.000 in 2.125 in 1.125 in 0.750 in 1.425 in 1.11 lb 1 





21-050 781412210507 Bagged - 1.750 in 2.375 in 2.313 in 1.125 in 1.000 in 1.613 in 1.65 lb 1 







21-064 781412210644 Bagged 2 in 1.875 in 2.840 in 2.750 in 1.437 in 1.188 in 2.050 in 2.06 lb 1 






Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/2" 

4 


507
















1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

























Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

508














Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 














Product 

Weight 

Shelf Pack 

Qty. 

1/2" 

4 


509












Durability 


GGG-W-660A 


1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 
























21-164D 781412211641 Bagged 2 in 1.875 in 2.840 in 2.875 in 1.440 in 1.188 in 0.688 in 2.27 lb 1 






Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

510









Durability 


GGG-W-660A 

3/4" Drive 6 Point SAE Budd Wheel Socket 

Dim. B: 

Wrench 

End 

Dim. A: 

Product 

Cat. No. UPC No. Packaging Opening Size Drive End 

Weight 

21-505 781412215052 Bagged 1-1/2" x 13/16" 1.750 in 2.250 in 4.000 in 1.062 in 0.656 in 3.250 in 2.87 lb 1 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 








Durability 

3/4" Drive Impact SAE Hex Bit Sockets 

1/2" 

4 

Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Dim. E: Length 

to Shoulder Rplc. Part 

Product 

Weight 

21-718 781412217186 Bagged 9/16 in 1.050 in 1.125 in 3.937 in 2.312 in 1.062 in Bit: 94-518 0.71 lb 1 




21-725 781412217254 Bagged 1 in 2.200 in 1.750 in 4.625 in 2.750 in 1.375 in Bit: 94-525 0.93 lb 1 

Dim. C: 

Overall 

Length 

Shelf Pack 

Qty. 


511












Durability 



1/2" 


Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 


























Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

512












Durability 



Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 
















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1/2" 

4 








Durability 


Dim. B: 

Nose 

Diameter 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. D: Bit 

Length 

Rplc. Part 

Product 

Weight 

48-719 781412487190 Bagged 14 mm 1.626 in 1.126 in 3.937 in 2.311 in 1.063 in Bit: 94-619 1.34 lb 1 





Dim. C: 

Overall 

Length 

Dim. E: 

Length to 

Shoulder 

Shelf Pack 

Qty. 


513


1" Drive Impact Extensions 










22-923 781412229233 Bulk 1" 1" 7.000 in 3.52 lb 1 

22-925 781412229257 Bulk 1" 1" 13.000 in 6.04 lb 1 








1" Drive Impact Universal Joint 

1" 


Female Drive 

Size 


Dim. A: Drive 


22-947 781412229479 Bulk 1" 1" 1.009 in 4.438 in 2.83 lb 1 


1" Drive Impact Drive Adapter 










Female Drive 

Size 


Dim. A: Drive 


22-951 781412229516 Bulk 1" 3/4" 1.009 in 2.630 in 1.76 lb 1 

22-952 781412229523 Bulk 1" 1-1/2" 1.009 in 3.563 in 2.72 lb 1 

1" Drive Ret Rings 




Wrenches. 






22-964 781412229646 Bagged 22-024 through 22-042, 22-228 through 22-242, 22-424 through 22-432, 22-954 0.03 lb 1 

22-965 781412229653 Bagged 22-044 through 22-116, 22-244 through 22-276, 22-436, 22-505 22-923 through 22-952 2.55 lb 1 

514


1" Drive O-Ring 




1" Drive Retainer Pin 











Durability 


GGG-W-660A 

1" Drive 6 Point SAE Impact Sockets 

1" 

4 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

22-024D 781412220247 Bulk 3/4 in 2.125 in 0.763 in 2.250 in 0.546 in 0.500 in 0.812 in 1.38 lb 1 

22-026 781412220261 Bulk 13/16 in 2.125 in 0.826 in 2.250 in 0.609 in 0.531 in 0.875 in 1.38 lb 1 



22-032D 781412220322 Bulk 1 in 2.125 in 1.015 in 2.375 in 0.671 in 0.656 in 0.875 in 1.48 lb 1 

22-034 781412220346 Bulk 1-1/16 in 2.125 in 1.077 in 2.375 in 0.703 in 0.656 in 0.875 in 1.50 lb 1 

22-036D 781412220360 Bulk 1-1/8 in 2.125 in 1.133 in 2.438 in 0.796 in 0.687 in 0.875 in 1.56 lb 1 



22-042 781412220421 Bulk 1-5/16 in 2.125 in 2.125 in 2.562 in 0.953 in 0.843 in - 1.68 lb 1 







Product 

Weight 

Shelf Pack 

Qty. 


515


1" 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 





22-064 781412220643 Bulk 2 in 2.250 in 3.000 in 2.937 in 1.390 in 1.093 in 2.062 in 3.00 lb 1 























22-120D 781412221206 Bulk 4 in 3.248 in 5.243 in 5.360 in 2.870 in 2.510 in 3.900 in 14.90 lb 1 




Product 

Weight 

Shelf Pack 

Qty. 

516










Durability 


GGG-W-660A 

1" Drive 6 Point SAE Deep Impact Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 








22-242D 781412222425 Bulk 1-5/16 in 2.125 in 2.125 in 3.500 in 0.953 in 0.843 in - 2.30 lb 1 


22-246D 781412222463 Bulk 1-7/16 in 2.250 in 2.250 in 3.500 in 1.015 in 0.843 in - 2.50 lb 1 


















Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

1" 

4 


517










1" Drive 4 Point SAE Impact Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 




22-430 781412224306 Bulk 15/16 in 2.125 in 2.125 in 2.500 in 0.672 in 0.594 in - 1.69 lb 1 

22-432 781412224320 Bulk 1 in 2.125 in 2.125 in 2.500 in 0.671 in 0.593 in - 1.71 lb 1 


Product 

Weight 

Shelf Pack 

Qty. 

1" 














1" Drive 6 Point Metric Impact Sockets 

Dim. B: 

Wrench 

End 


Fastener 

Size 

Dim. A: 

Drive End 

Product 

Weight 

49-019 781412490190 Bulk 19 mm 2.004 in 1.437 in 2.236 in 0.752 in 0.500 in 0.657 in 1.10 lb 1 





49-030 781412490305 Bulk 30 mm 2.067 in 2.067 in 2.669 in 1.000 in 0.752 in - 1.50 lb 1 










Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Shelf Pack 

Qty. 

518







Durability 


GGG-W-660A 

1" Drive 6 Point SAE Budd Wheel Socket 


22-505 781412225051 Bulk 

Opening 

Size 

1-1/2 x 

13/16 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 

Product 

Weight 

Shelf Pack 

Qty. 

2.250 in 2.312 in 4.000 in 0.750 in 0.291 in 3.313 in 3.16 lb 1 

1" 

4 


519


1-1/2" Drive Impact Extensions 








GGG-W-660A6 


23-924 781412239249 Bulk 1-1/2" 1-1/2" 8.000 in 8.70 lb 1 

23-928 781412239287 Bulk 1-1/2" 1-1/2" 15.000 in 15.11 lb 1 

1-1/2" 










GGG-W-660A6 


1-1/2" Drive Impact Universal Joint 

Female Drive 

Size 


Dim. A: Drive 


23-947 781412239478 Bulk 1-1/2" 1-1/2" 1.500 in 6.000 in 9.34 lb 1 








GGG-W-660A6 


1-1/2" Drive Impact Drive Adapter 

Female Drive 

Size 


Dim. A: Drive 


23-951 781412239515 Bulk 1-1/2" 1" 1.500 in 3.437 in 5.35 lb 1 

1-1/2" Drive Ret Rings 




Wrenches. 






23-964 781412239645 Bagged 23-044 through 23-160, 23-924 through 23-951 0.04 lb 1 

520


1-1/2" Drive O-Ring 




1-1/2" Drive Retainer Pin 











Durability 


GGG-W-660A 

1-1/2" Drive 6 Point SAE Impact Sockets 

1-1/2" 

4 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 


















Product 

Weight 

Shelf Pack 

Qty. 


521


1-1/2" 



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 






































Product 

Weight 

Shelf Pack 

Qty. 

522










Durability 


GGG-W-660A 

1-1/2" Drive 6 Point SAE Deep Impact Sockets 


Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 









23-264 781412232646 Bulk 2 in 3.270 in 3.270 in 5.655 in 1.600 in 1.260 in - 10.00 lb 1 



























Product 

Weight 

Shelf Pack 

Qty. 

1-1/2" 

4 


523



Fastener 

Size 

Dim. A: 

Drive End 

Dim. B: 

Wrench 

End 

Dim. C: 

Overall 

Length 

Dim. 

D: Bolt 

Clearance 

Dim. E: 

Wrench 

Depth 

Dim. F: 

Length to 

Shoulder 
















Product 

Weight 

Shelf Pack 

Qty. 


1-1/2" 

524

A L L E N H E X K E Y S 

Hex Key Foldups................................ 527 

Short Arm Hex Keys........................... 534 

Long Arm Hex Keys............................ 542 

Ball-Plus Hex Keys........................ 528 

Magnetic Hex Keys............................ 547 

Ball-Plus Cushion Grip T-Handles 558 

5 


525


Hex Keys 

William G. Allen patented a cold drawing process for making hex socket set screws that were stronger than any other at the time. 

These quality fasteners demanded quality tools so it wasn’t long before the Allen hex key wrench was created. As the business grew 

so did Allen’s reputation for uncompromising quality. Today the makers of the number one hex key wrench in the world have put 

nearly a century of experience into a hex wrench product line with the quality durability and value worthy of the name Allen. 

All Allen hex keys are manufactured with heat-treated alloy steel, black finish to precision tolerances, and meet the requirements 

of ASME/ANSI B18.3 and Federal Standard GGG-K-275 AMED 1. 

Rotates to 270 degrees to a firm stop 

for better torqueing and access 

Longer length keys for additional 

leverage and extended reach 

All hex keys are precision 

formed to exact dimensional 

tolerances for precise fit 

Non-interference 

hinged caddy provides 

easy access 

to each key 

Dual material case is color coded for quick 

identification: SAE - Green, Metric - Blue 

Heat treated, tempered alloy steel 

provides high strength and resistance 

to rotational distortion 

Dual Material T-Handle provides 

superior strength and ultimate comfort 

for extra torque and safety 

A L L E N H E X K E Y S 5 

Magnetic head 

provides efficiency in 

holding fasteners in 

tight work areas 

Ball-Plus hex permits an 

entry angle up to 25° to work 

in hard-to-reach areas 

Color coded for 

quick identification: 

SAE - Green, 

Metric - Blue 

T-Thru handle design has a 

long arm with ball end for 

access and a standard hex 

short arm for high torque 

Hex, Ball and Torx® make up the most 

complete line of key configurations available 

526


9-Key Duracast® SAE Hex Key Fold-up Set 


■■From Allen®, the Original Manufacturer of the Hex Key 

■■Heat Treated, Tempered Alloy Steel Provides High Strength and 

Resistance to Rotational Distortion 

■■All Hex Keys Are Precision Formed to Exact Dimensional 

Tolerances for Precise Fit 

■■Rotates to 270 Degrees to a Firm Stop for Better Torqueing and 

Access 

■■Specially Contoured Handle for Better Feel and Control 

■■Rugged Duracast® Case Provides Unmatched Durability 

Cat. No. UPC No. Packaging Number of Keys Key Sizes Product Weight Shelf Pack Qty. 

56346 0095969551205 Carded 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 0.34 lb 3 

56347 0095969551212 Carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 0.57 lb 3 

7-Key Duracast® Metric Hex Key Fold-up Set 







■■Rotates to 270 Degrees to A Firm Stop for Better Torqueing and 

Access 



Cat. No. UPC No. Packaging Number of Keys Key Sizes Handle Length Product Weight Shelf Pack Qty. 

56349 082171563492 Carded 7 1.5, 2, 2.5, 3, 4, 5, 6 3-1/2 in 0.36 lb 3 

5 

7-Key Duracast® Torx® Key Fold-up Set 








Access 




56348 082171563485 Carded 7 T-10, T-15, T-20, T-25, T-27, T-30, T-40 4-1/4 in 0.55 lb 3 


527


9-Key Duracast® SAE Ball-Plus Hex Key Fold-up Set 








Access 




56382 082171563829 Carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 4-1/4 in 0.70 lb 5 

17-Key SAE/Metric Hex Key Fold-up Set 







Access 

■■Dual Material Case is Color Coded for Quick Identification: SAE - 

Green, Metric Blue 



56632G 082171566325 Carded 17 

Inch 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8 


0.71 lb 1 

56624G 9 Piece Dual Material Fold-up Inch Hex Key Set 56628G 8 Piece Dual Material Fold-up Metric Hex Key Set 

9-Key SAE Hex Key Fold-up Set 







Access 




56622G 082171566226 Carded 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 4-1/4 in 0.22 lb 1 

56624G 082171566240 Carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 4-1/4 in 0.22 lb 1 

528


8-Key Metric Hex Key Fold-up Set 







Access 




56628G 082171566288 Carded 8 1.5, 2, 2.5, 3, 4, 5, 6, 8 4-1/4 in 0.37 lb 1 








Access 




56626G 082171566264 Carded 7 1.5, 2, 2.5, 3, 4, 5, 6 4-1/4 in 0.25 lb 1 

5 

8-Key Torx® Key Fold-up Set 







Access 




56634G 082171566349 Carded 8 T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40 4-1/4 in 0.34 lb 1 


529









■■Nickel-Chrome-Moly Alloy Steel Provides Outstanding Torque 

Strength 


56066 082171560668 Bulk 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 3-3/8 in 0.25 lb 10 

56067 082171560675 Bulk 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 3-3/4 in 0.45 lb 10 

56316 082171563164 Carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 3-3/4 in 0.45 lb 3 

56321 082171563218 Carded 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 3-3/8 in 0.20 lb 3 









Strength 


56114 082171561146 Bulk 8 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 3 in 0.25 lb 10 

56314 082171563140 Carded 8 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 3 in 0.18 lb 3 










Strength 


56070D 082171560705 Bulk 7 1.5, 2, 2.5, 3, 4, 5, 6 3-3/4 in 0.29 lb 3 

56360 082171563607 Carded 7 1.5, 2, 2.5, 3, 4, 5, 6 3-3/4 in 0.29 lb 3 

7-Key Torx® Key Fold-up Set 








Strength 



530


9-Key SAE HI-VIS Hex Key Fold-up Set 








Strength 

■■Hi-VIS Color for Easy Identification 


Number of 

Keys Key Sizes Handle Length Product Weight Shelf Pack Qty. 

56073D 082171560736 Bulk 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 3-3/8 in 0.26 lb 10 

56391 082171563911 Carded 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 3-3/8 in 0.27 lb 3 

9-Key SAE HI-VIS Long Hex Key Fold-up Set 








Strength 

■■Longer Length Keys for Extended Reach 



56074 082171560743 Bulk 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 6-3/8 in 0.44 lb 10 









Strength 



56115 082171561153 Bulk 8 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 3 in 0.18 lb 10 








Strength 



56636G 082171566363 Carded 9 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 0.30 lb 1 

56638G 082171566387 Carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 0.34 lb 1 

5 


531


6-Key SAE HI-VIS Long Hex Key Fold-up Set 







Strength 




56642G 082171566424 Carded 6 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 0.80 lb 1 

7-Key Metric HI-VIS Hex Key Fold-up Set 








Strength 



56076 082171560767 Bulk 7 1.5, 2, 2.5, 3, 4, 5, 6 3-3/4 in 0.35 lb 3 

56395 082171563959 Carded 7 1.5, 2, 2.5, 3, 4, 5, 6 3-3/4 in 1.00 lb 3 









Strength 



56640G 082171566400 Carded 7 1.5, 2, 2.5, 3, 4, 5, 6 0.34 lb 1 








Strength 



56644G 082171566448 Carded 6 3, 4, 5, 6, 8, 10 0.79 lb 1 

532


5-Key Metric HI-VIS Long Hex Key Fold-up Set 








Strength 




56077 082171560774 Bulk 5 4, 5, 6, 8, 10 6-3/8 in 1.04 lb 5 

7-Key Torx® Key HI-VIS Fold-up Set 








Strength 




56897 082171568978 Bulk 7 T-10, T-15, T-20, T-25, T-27, T-30, T-40 3-3/4 in 0.44 lb 3 

8-Key Torx® Key HI-VIS Fold-up Set 







Strength 



56648G 082171566486 Carded 8 T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40 0.52 lb 1 

9-Key SAE Long Hex Key Fold-up Set 








Strength 


5 



56318 082171563188 Carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 6-3/8 in 0.76 lb 3 

533


5-Key SAE Long Hex Key Fold-up Set 








Strength 



56320 082171563201 Carded 5 3/16, 7/32, 1/4, 5/16, 3/8 6-3/8 in 1.05 lb 3 

5-Key Metric Long Hex Key Fold-up Set 








Strength 



56072D 082171560729 Bulk 5 4, 5, 6, 8, 10 6-3/8 in 1.04 lb 5 

56362 082171563621 Carded 5 4, 5, 6, 8, 10 6-3/8 in 1.04 lb 5 


20-Key SAE Short Arm Hex Key Set - Pouch 







■■Pouch Conveniently Organizes and Stores Hex Keys 


56011D 082171560118 Pouch 20 

0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 

7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 


4.06 lb 1 

57002D 0.028" Short Arm L Hex Key 57014D 1/8" Short Arm L Hex Key 57030D 3/8" Short Arm L Hex Key 

57004D 0.035" Short Arm L Hex Key 57018 9/64" Short Arm L Hex Key 57031D 7/16" Short Arm L Hex Key 

57006 0.050" Short Arm L Hex Key 57020D 5/32" Short Arm L Hex Key 57032D 1/2" Short Arm L Hex Key 

57008D 1/16" Short Arm L Hex Key 57022 3/16" Short Arm L Hex Key 57034D 9/16" Short Arm L Hex Key 

57010 5/64" Short Arm L Hex Key 57024 7/32" Short Arm L Hex Key 57036 5/8" Short Arm L Hex Key 

57012 3/32" Short Arm L Hex Key 57026D 1/4" Short Arm L Hex Key 57038D 3/4" Short Arm L Hex Key 

57013D 7/64" Short Arm L Hex Key 57028 5/16" Short Arm L Hex Key 

534


18-Key SAE Short Arm Hex Key Set - Metal Box 







■■Metal Box Conveniently Organizes and Stores Hex Keys 


56026 082171560262 Boxed 18 

0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 

3/16, 7/32, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8 


3.45 lb 1 

57002D 0.028" Short Arm L Hex Key 57013D 7/64" Short Arm L Hex Key 57026D 1/4" Short Arm L Hex Key 

57004D 0.035" Short Arm L Hex Key 57014D 1/8" Short Arm L Hex Key 57028 5/16" Short Arm L Hex Key 

57006 0.050" Short Arm L Hex Key 57018 9/64" Short Arm L Hex Key 57030D 3/8" Short Arm L Hex Key 

57008D 1/16" Short Arm L Hex Key 57020D 5/32" Short Arm L Hex Key 57032D 1/2" Short Arm L Hex Key 

57010 5/64" Short Arm L Hex Key 57022 3/16" Short Arm L Hex Key 57034D 9/16" Short Arm L Hex Key 


15-Key SAE Short Arm Hex Key Set 







■■Metal Box or Pouch Conveniently Organizes and Stores Hex 

Keys 

5 


56028D 082171560286 Boxed 15 

56032 082171560323 Pouch 15 

0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 

7/32, 1/4, 5/16, 3/8 

0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 

7/32, 1/4, 5/16, 3/8 


1.06 lb 1 

0.50 lb 10 

57002D 0.028" Short Arm L Hex Key 57012 3/32" Short Arm L Hex Key 57022 3/16" Short Arm L Hex Key 



57008D 1/16" Short Arm L Hex Key 57018 9/64" Short Arm L Hex Key 57028 5/16" Short Arm L Hex Key 



535









■■Color Coded Key Caddy Organizes and Stores Hex Keys 


56080 082171560804 Bulk 13 

0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8 


0.52 lb 1 


57008D 1/16" Short Arm L Hex Key 57018 9/64" Short Arm L Hex Key 57028 5/16" Short Arm L Hex Key 


57012 3/32" Short Arm L Hex Key 57022 3/16" Short Arm L Hex Key 












56108 082171561085 Bulk 12 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 0.35 lb 1 


57006 0.050" Short Arm L Hex Key 57013D 7/64" Short Arm L Hex Key 57022 3/16" Short Arm L Hex Key 

57008D 1/16" Short Arm L Hex Key 57014D 1/8" Short Arm L Hex Key 57024 7/32" Short Arm L Hex Key 


57012 3/32" Short Arm L Hex Key 57020D 5/32" Short Arm L Hex Key 57028 5/16" Short Arm L Hex Key 

536











56030 082171560309 Pouch 11 0.050, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 0.53 lb 10 



57008D 1/16" Short Arm L Hex Key 57020D 5/32" Short Arm L Hex Key 57028 5/16" Short Arm L Hex Key 












56122D 082171561221 Pouch 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 5.75 lb 25 

5 


57010 5/64" Short Arm L Hex Key 57014D 1/8" Short Arm L Hex Key 57022 3/16" Short Arm L Hex Key 


57013D 7/64" Short Arm L Hex Key 57020D 5/32" Short Arm L Hex Key 57026D 1/4" Short Arm L Hex Key 











56004D 082171560040 Pouch 7 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 0.60 lb 3 





537











56100 082171561009 Pouch 6 0.028, 0.035, 0.050, 1/16, 5/64, 3/32 0.35 lb 15 


57002D 0.028" Short Arm L Hex Key 57006 0.050" Short Arm L Hex Key 57010 5/64" Short Arm L Hex Key 


15-Key Metric Short Arm Hex Key Set - Metal Box 









56036D 082171560361 Boxed 15 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 17 3.50 lb 1 



57129 0.70mm Short Arm L Hex Key 57120 2.5mm Short Arm L Hex Key 57130 8mm Short Arm L Hex Key 

57131 0.90mm Short Arm L Hex Key 57122 3mm Short Arm L Hex Key 57132 10mm Short Arm L Hex Key 



57118 2mm Short Arm L Hex Key 57128 6mm Short Arm L Hex Key 57138 17mm Short Arm L Hex Key 

12-Key Metric Short Arm Hex Key Set - Metal Box 









56038 082171560385 Boxed 12 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 5.50 lb 1 



57131 0.90mm Short Arm L Hex Key 57120 2.5mm Short Arm L Hex Key 57128 6mm Short Arm L Hex Key 



538


9-Key Metric Short Arm Hex Key Set 







■■Metal Box or Pouch Conveniently Organizes and Stores Hex 

Keys 


56008D 082171560088 Bulk 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.49 lb 1 

56015D 082171560156 Pouch 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.49 lb 25 



57118 2mm Short Arm L Hex Key 57124 4mm Short Arm L Hex Key 57130 8mm Short Arm L Hex Key 


13-Key Torx® Short Arm Key Set - Pouch 









56901 082171569012 Pouch 13 

T-7, T-8, T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-50, 

T-55 


0.70 lb 10 

57982 T-7 Short Arm L Hex Key 57987 T-20 Short Arm L Torx® Key 57992 T-45 Short Arm L Torx® Key 

57983 T-8 Short Arm L Hex Key 57988 T-25 Short Arm L Torx® Key 57993 T-50 Short Arm L Torx® Key 

57984 T-9 Short Arm L Torx® Key 57989 T-27 Short Arm L Torx® Key 57994 T-55 Short Arm L Torx® Key 

57985 T-10 Short Arm L Torx® Key 57990 T-30 Short Arm L Torx® Key 

57986 T-15 Short Arm L Torx® Key 57991 T-40 Short Arm L Torx® Key 

5 


539


Individual SAE Short Arm Hex Keys 









57002D 082171570025 Bagged 0.028 in 1.218 in 0.01 lb 100 

57004D 082171570049 Bagged 0.035 in 1.218 in 0.01 lb 100 

57006 082171570063 Bagged 0.050 in 1.656 in 0.01 lb 100 

57008D 082171570087 Bagged 1/16 in 1.750 in 0.01 lb 100 

57010 082171570100 Bagged 5/64 in 1.875 in 0.01 lb 100 

57012 082171570124 Bagged 3/32 in 2.000 in 0.01 lb 100 



57018 082171570186 Bagged 9/64 in 2.375 in 0.03 lb 100 


57022 082171570223 Bagged 3/16 in 2.750 in 0.03 lb 100 

57024 082171570247 Bagged 7/32 in 3.000 in 0.03 lb 100 


57028 082171570285 Bagged 5/16 in 3.750 in 0.10 lb 50 





57036 082171570360 Bagged 5/8 in 6.250 in 0.74 lb 10 



57042 082171570421 Bagged 1 in 9.250 in 2.70 lb 5 

57044 082171570445 Bagged 1-1/4 in 11.250 in 5.44 lb 1 

57046 082171570469 Bagged 1-1/2 in 13.250 in 9.20 lb 1 

540


Individual Metric Short Arm Hex Keys 








57129 082171571299 Bagged 0.70 mm 1.700 in 0.01 lb 100 

57131 082171571312 Bagged 0.90 mm 1.723 in 0.01 lb 100 

57135 082171571350 Bagged 1.3 mm 1.733 in 0.01 lb 100 

57116 082171571169 Bagged 1.5 mm 1.733 in 0.01 lb 100 

57118 082171571183 Bagged 2 mm 1.930 in 0.01 lb 100 

57120 082171571206 Bagged 2.5 mm 2.146 in 0.01 lb 100 

57122 082171571220 Bagged 3 mm 2.421 in 0.01 lb 100 

57124 082171571244 Bagged 4 mm 2.677 in 0.01 lb 100 

57126 082171571268 Bagged 5 mm 3.071 in 0.01 lb 100 

57128 082171571282 Bagged 6 mm 3.465 in 0.02 lb 50 

57130 082171571305 Bagged 8 mm 3.839 in 0.08 lb 50 

57132 082171571329 Bagged 10 mm 4.291 in 0.13 lb 25 

57133 082171571336 Bagged 12 mm 4.803 in 0.18 lb 10 

57134 082171571343 Bagged 14 mm 5.374 in 0.18 lb 10 

57138 082171571381 Bagged 17 mm 6.142 in 0.20 lb 1 

57142 082171571428 Bagged 19 mm 6.890 in 0.20 lb 1 

57143 082171571435 Bagged 22 mm 7.677 in 0.21 lb 1 

5 

Individual Torx® Short Arm Keys 








57981 082171579813 Bagged T6 1.660 in 0.01 lb 1 

57982 082171579820 Bagged T7 1.880 in 0.01 lb 1 

57983 082171579837 Bagged T8 1.880 in 0.01 lb 1 

57984 082171579844 Bagged T-9 1.880 in 0.01 lb 1 

57985 082171579851 Bagged T-10 2.000 in 0.05 lb 1 

57986 082171579868 Bagged T-15 2.130 in 0.01 lb 1 

57987 082171579875 Bagged T-20 2.250 in 0.02 lb 1 

57988 082171579882 Bagged T-25 2.380 in 0.03 lb 1 

57989 082171579899 Bagged T-27 2.500 in 0.03 lb 1 

57990 082171579905 Bagged T-30 2.750 in 0.05 lb 1 

57991 082171579912 Bagged T-40 3.000 in 0.08 lb 1 

57992 082171579929 Bagged T-45 3.250 in 0.12 lb 1 

57993 082171579936 Bagged T-50 3.750 in 0.14 lb 1 

57994 082171579943 Bagged T-55 4.250 in 0.16 lb 1 


541


22-Key SAE/Metric Long Arm Hex Key Set 







■■Longer Length Keys for Additional Leverage and Extended 

Reach 



56009D 082171560095 Carded 22 

INCH 0.050, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 

1.50 lb 1 

22-Key SAE/Metric Long Arm Hex Key Set 







Reach 

■■Non-Interference Hinged Caddy Provides Easy Access to Each 

Key 



56609G 082171566097 Carded 22 

INCH 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 

15-Key SAE Long Arm Hex Key Set - Pouch 








Reach 


0.73 lb 1 


56014 082171560149 Pouch 15 

5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 1/2, 

9/16, 5/8, 3/4 

5.70 lb 1 


58002 5/64" Long Arm L Hex Key 58012 5/32" Long Arm L Hex Key 58022 3/8" Long Arm L Hex Key 


58005D 7/64" Long Arm L Hex Key 58016 7/32" Long Arm L Hex Key 58026 9/16" Long Arm L Hex Key 



542


13-Key SAE Long Arm Hex Key Set 








Reach 



56081 082171560811 Carded 13 

0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 

3/8 


0.81 lb 1 

58001D 1/16" Long Arm L Hex Key 58006D 1/8" Long Arm L Hex Key 58018 1/4" Long Arm L Hex Key 

58002 5/64" Long Arm L Hex Key 58010D 9/64" Long Arm L Hex Key 58020 5/16" Long Arm L Hex Key 

58003 0.050" Long Arm L Hex Key 58012 5/32" Long Arm L Hex Key 58022 3/8" Long Arm L Hex Key 

58004 3/32" Long Arm L Hex Key 58014 3/16" Long Arm L Hex Key 

58005D 7/64" Long Arm L Hex Key 58016 7/32" Long Arm L Hex Key 

13-Key SAE Long Arm Hex Key Set - Metal Box 








Reach 


5 


56128D 082171561283 Boxed 13 

1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 

3/8, 1/2 


2.10 lb 1 







543










Reach 



56013D 082171560132 Pouch 13 

0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8 


0.90 lb 10 














Reach 


Key 


56603G 082171566035 Carded 13 

0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8 









Reach 


0.92 lb 1 


56152 082171561528 Carded 12 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 0.50 lb 1 




58003 0.050" Long Arm L Hex Key 58010D 9/64" Long Arm L Hex Key 58018 1/4" Long Arm L Hex Key 


544










Reach 



56150 082171561504 Pouch 11 0.050, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 0.71 lb 10 














Reach 



56148 082171561481 Carded 7 5/64, 3/32, 1/8, 9/64, 5/32, 3/16 0.16 lb 10 



58004 3/32" Long Arm L Hex Key 58010D 9/64" Long Arm L Hex Key 


5 


545


15-Key Metric Long Arm Hex Key Set - Pouch 








Reach 



56083 082171560835 Pouch 15 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 17, 19 5.70 lb 1 


58048 0.09mm Long Arm L Hex Key 58056 3mm Long Arm L Hex Key 58066 10mm Long Arm L Hex Key 



58052 2mm Long Arm L Hex Key 58062 6mm Long Arm L Hex Key 58092 17mm Long Arm L Hex Key 



10-Key Metric Long Arm Hex Key Set - Metal Box 








Reach 



56085 082171560859 Boxed 10 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12 2.05 lb 1 




58054 2.5mm Long Arm L Hex Key 58062 6mm Long Arm L Hex Key 

58056 3mm Long Arm L Hex Key 58064 8mm Long Arm L Hex Key 

9-Key Metric Long Arm Hex Key Set 







Reach 


Key 


56606G 082171566066 Carded 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.80 lb 1 

546


9-Key Metric Long Arm Hex Key Set 








Reach 



56018D 082171560187 Pouch 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.66 lb 10 

56149 082171561498 Carded 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.82 lb 1 





9-Key Torx® Long Arm Key Set 







Reach 


Key 


56620G 082171566202 Carded 9 T-8, T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40 0.40 lb 1 

5 

9-Key Torx® Magnetic Long Arm Key Set 


■■Magnetic Head Provides Efficiency in Holding Fasteners in Tight 

Work Areas 






Reach 


Key 


56605G 082171066030 Carded 9 T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-50 0.73 lb 1 


547


6-Key Torx® Long Arm Key Set 








Reach 



56900 082171569005 Pouch 6 T-10, T-15, T-20, T-25, T-27, T-30 0.20 lb 10 


58926 T-10 Long Arm L Torx® Key 58928 T-20 Long Arm L Torx® Key 58930 T-27 Long Arm L Torx® Key 

58927 T-15 Long Arm L Torx® Key 58929 T-25 Long Arm L Torx® Key 58931 T-30 Long Arm L Torx® Key 

270-Key SAE Hex Key Assortment 








Reach 




56882 082171568824 Boxed 270 

5/64, QTY: 50; 3/32, QTY: 50; 1/8, QTY: 50; 5/32, QTY: 25; 3/16, 

QTY: 25; 7/32, QTY: 25; 1/4, QTY: 25; 5/16, QTY: 10; 3/8, QTY: 10; 


57010 5/64" Short Arm L Hex Key 50 57024 7/32" Short Arm L Hex Key 25 

57012 3/32" Short Arm L Hex Key 50 57026D 1/4" Short Arm L Hex Key 25 

57014D 1/8" Short Arm L Hex Key 50 57028 5/16" Short Arm L Hex Key 10 

57020D 5/32" Short Arm L Hex Key 25 57030D 3/8" Short Arm L Hex Key 10 

57022 3/16" Short Arm L Hex Key 25 

12.55 lb 1 

548


Individual SAE Long Arm Hex Keys 








Reach 



58002 082171580024 Bagged 5/64 in 3.187 in 0.01 lb 100 

58003 082171580031 Bagged 0.050 in 2.843 in 0.01 lb 100 

58004 082171580048 Bagged 3/32 in 3.375 in 0.01 lb 100 



58007 082171580079 Bagged 0.035 in 2.671 in 0.01 lb 100 


58012 082171580123 Bagged 5/32 in 4.125 in 0.03 lb 100 

58014 082171580147 Bagged 3/16 in 4.500 in 0.05 lb 100 

58016 082171580161 Bagged 7/32 in 4.875 in 0.18 lb 50 

58018 082171580185 Bagged 1/4 in 5.250 in 0.10 lb 50 

58020 082171580208 Bagged 5/16 in 6.000 in 0.17 lb 25 

58022 082171580222 Bagged 3/8 in 6.750 in 0.25 lb 25 

58023 082171580239 Bagged 7/16 in 7.500 in 0.43 lb 10 

58024 082171580246 Bagged 1/2 in 8.250 in 0.60 lb 10 

58026 082171580260 Bagged 9/16 in 9.000 in 0.85 lb 10 

58028 082171580284 Bagged 5/8 in 9.750 in 1.10 lb 5 

58030 082171580307 Bagged 3/4 in 11.250 in 1.85 lb 5 

58032 082171580321 Bagged 7/8 in 12.750 in 2.75 lb 2 

58034 082171580345 Bagged 1 in 14.250 in 4.20 lb 2 

5 

9 Pc. SAE 6" Long Arm Hex Key Set 








Reach 



56034 082171560347 Pouch 9 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 0.76 lb 10 



58020 5/16" Long Arm L Hex Key 58074 1/8" Long Arm (6") L Hex Key 58080 7/32" Long Arm (6") L Hex Key 

58070 5/64" Long Arm (6") L Hex Key 58076 5/32" Long Arm (6") L Hex Key 58082 1/4" Long Arm (6") L Hex Key 


549


7 Pc. SAE 12" Long Arm Hex Key Set 








Reach 



56110 082171561108 Pouch 7 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 0.68 lb 1 



58202 3/32" Long Arm (12") L Hex Key 58208 3/16" Long Arm (12") L Hex Key 

58204 1/8" Long Arm (12") L Hex Key 58210 7/32" Long Arm (12") L Hex Key 

Individual SAE 6" Long Arm Hex Keys 








Reach 



58070 082171580703 Bagged 5/64 in 6.000 in 0.02 lb 25 

58072 082171580727 Bagged 3/32 in 6.000 in 0.02 lb 25 

58073 082171580734 Bagged 7/64 in 6.000 in 0.02 lb 25 

58074 082171580741 Bagged 1/8 in 6.000 in 0.04 lb 25 

58075 082171580758 Bagged 9/64 in 6.000 in 0.05 lb 25 

58076 082171580765 Bagged 5/32 in 6.000 in 0.08 lb 25 

58078 082171580789 Bagged 3/16 in 6.000 in 0.08 lb 25 

58080 082171580802 Bagged 7/32 in 6.000 in 0.08 lb 25 

58082 082171580826 Bagged 1/4 in 6.000 in 0.08 lb 25 

58086 082171580864 Bagged 3/8 in 6.000 in 0.08 lb 25 

550


Individual SAE 12" Long Arm Hex Keys 








Reach 


58200 082171582004 Bagged 5/64 in 12.000 in 0.02 lb 25 

58202 082171582028 Bagged 3/32 in 12.000 in 0.03 lb 25 

58204 082171582042 Bagged 1/8 in 12.000 in 0.05 lb 25 

58206 082171582066 Bagged 5/32 in 12.000 in 0.19 lb 25 

58208 082171582080 Bagged 3/16 in 12.000 in 0.19 lb 25 

58210 082171582103 Bagged 7/32 in 12.000 in 0.19 lb 25 

58212 082171582127 Bagged 1/4 in 12.000 in 0.19 lb 25 

Individual Metric Long Arm Hex Keys 








Reach 

5 


58048 082171580482 Bagged 0.09 mm 3.022 in 0.15 lb 100 

58049 082171580499 Bagged 1.3 mm 3.028 in 0.15 lb 100 

58050 082171580505 Bagged 1.5 mm 3.032 in 0.01 lb 100 

58052 082171580529 Bagged 2 mm 3.229 in 0.01 lb 100 

58054 082171580543 Bagged 2.5 mm 3.484 in 0.01 lb 100 

58056 082171580567 Bagged 3 mm 3.878 in 0.02 lb 100 

58058 082171580581 Bagged 4 mm 4.095 in 0.04 lb 100 

58060 082171580604 Bagged 5 mm 4.567 in 0.04 lb 100 

58062 082171580628 Bagged 6 mm 5.433 in 0.09 lb 50 

58063 082171192555 Bagged 7 mm 5.808 in 0.09 lb 50 

58064 082171580642 Bagged 8 mm 6.201 in 0.12 lb 50 

58066 082171580666 Bagged 10 mm 6.575 in 0.20 lb 25 

58068 082171580680 Bagged 12 mm 8.228 in 0.25 lb 10 

58090 082171580901 Bagged 14 mm 9.155 in 0.80 lb 10 

58092 082171580925 Bagged 17 mm 9.686 in 1.35 lb 5 

58094 082171580949 Bagged 19 mm 10.847 in 1.86 lb 5 


551


Individual Torx® Long Arm Keys 








Reach 


58926 082171589263 Bagged T-10 3.380 in 0.02 lb 25 

58927 082171589270 Bagged T-15 3.560 in 0.02 lb 25 

58928 082171589287 Bagged T-20 3.750 in 0.03 lb 25 

58929 082171589294 Bagged T-25 3.940 in 0.04 lb 25 

58930 082171589300 Bagged T-27 4.130 in 0.05 lb 25 

58931 082171589317 Bagged T-30 4.500 in 0.06 lb 25 


31-Key SAE/Metric Ball-Plus Hex and Torx® Magnetic 

Key Set 


■■Ball-Plus Hex Keys Permit An Entry Angle Up to 25° to Work in 

Hard-To-Reach Areas 


Work Areas 






Reach 


Key 


56604G 082171566042 Carded 31 

INCH 0.050, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10; 

Torx® T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-50 

2.46 lb 1 

22-Key SAE/Metric Magnetic Ball-Plus Hex Key Set 





Work Areas 






Reach 


Key 


56602G 082171566028 Carded 22 

INCH 0.050, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 

0.73 lb 1 

552


13-Key SAE Magnetic Ball-Plus Hex Key Set 





Work Areas 






Reach 


Key 


56601G 082171566011 Carded 13 

0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8 

0.90 lb 1 

9-Key Long Arm Metric Ball-Plus Magnetic Hex Key Set 





Work Areas 






Reach 


Key 

5 


56600G 082171566004 Carded 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.90 lb 1 

22-Key SAE/Metric Ball-Plus Hex Key Set 









Reach 


Key 



56618G 082171566189 Carded 22 

INCH 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 

1.69 lb 1 

553


22-Key SAE/Metric Ball-Plus Hex Key Set 










Reach 



56192 082171561924 Carded 22 

INCH 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8; 

MM 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 

1.60 lb 1 



59100 1.5mm Long Arm L Hex Key with Ball-Plus Ball End 59304 5/64" Long Arm L Hex Key with Ball-Plus Ball End 

59102 2mm Long Arm L Hex Key with Ball-Plus Ball End 59306 3/32" Long Arm L Hex Key with Ball-Plus Ball End 

59104 2.5mm Long Arm L Hex Key with Ball-Plus Ball End 59308 7/64" Long Arm L Hex Key with Ball-Plus Ball End 







59300 0.050" Long Arm L Hex Key with Ball-Plus Ball End 59322 5/16" Long Arm L Hex Key with Ball-Plus Ball End 

59302 1/16" Long Arm L Hex Key with Ball-Plus Ball End 59324 3/8" Long Arm L Hex Key with Ball-Plus Ball End 

13-Key SAE Ball-Plus Hex Key Set 










Reach 



56190 082171561900 Carded 13 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 0.80 lb 1 

56193 082171561931 Bulk 13 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 0.89 lb 1 








59312 9/64" Long Arm L Hex Key with Ball-Plus Ball End 

554











Reach 


Key 


56612G 082171566127 Carded 13 

0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 

5/16, 3/8 

0.91 lb 1 











Reach 



56196 082171561962 Carded 12 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 0.51 lb 1 








9-Key Metric Ball-Plus Hex Key Set 









Reach 


Key 


56615G 082171566158 Carded 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.81 lb 1 

5 


555












Reach 



56198 082171561986 Bulk 7 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 0.15 lb 1 





59310 1/8" Long Arm L Hex Key with Ball-Plus Ball End 


9-Key Metric Ball-Plus Hex Key Set 










Reach 



56191 082171561917 Carded 9 1.5, 2, 2.5, 3, 4, 5, 6, 8,10 0.80 lb 1 

56194 082171561948 Bulk 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 0.75 lb 1 


59100 1.5mm Long Arm L Hex Key with Ball-Plus Ball End 59110 5mm Long Arm L Hex Key with Ball-Plus Ball End 

59102 2mm Long Arm L Hex Key with Ball-Plus Ball End 59112 6mm Long Arm L Hex Key with Ball-Plus Ball End 

59104 2.5mm Long Arm L Hex Key with Ball-Plus Ball End 59114 8mm Long Arm L Hex Key with Ball-Plus Ball End 

59106 3mm Long Arm L Hex Key with Ball-Plus Ball End 59116 10mm Long Arm L Hex Key with Ball-Plus Ball End 

59108 4mm Long Arm L Hex Key with Ball-Plus Ball End 

556


Individual SAE Ball-Plus Long Arm Hex Keys 










Reach 


59300 082171593000 Bagged 0.050 in 2.922 in 0.02 lb 10 

59302 082171593024 Bagged 1/16 in 3.000 in 0.02 lb 10 

59304 082171593048 Bagged 5/64 in 3.188 in 0.02 lb 10 

59306 082171593062 Bagged 3/32 in 3.375 in 0.04 lb 10 

59308 082171593086 Bagged 7/64 in 3.563 in 0.06 lb 10 

59310 082171593109 Bagged 1/8 in 3.750 in 0.06 lb 10 

59312 082171593123 Bagged 9/64 in 3.948 in 0.06 lb 10 

59314 082171593147 Bagged 5/32 in 4.170 in 0.06 lb 10 

59316 082171593161 Bagged 3/16 in 4.500 in 0.07 lb 10 

59318 082171593185 Bagged 7/32 in 4.875 in 0.07 lb 10 

59320 082171593208 Bagged 1/4 in 5.250 in 0.09 lb 10 

59322 082171593222 Bagged 5/16 in 6.000 in 0.09 lb 10 

59324 082171593246 Bagged 3/8 in 6.750 in 0.12 lb 10 

59326 082171593260 Bagged 7/16 in 7.500 in 0.16 lb 2 

59328 082171593284 Bagged 1/2 in 8.250 in 0.70 lb 2 

59330 082171593307 Bagged 9/16 in 9.000 in 0.85 lb 1 

59332 082171593321 Bagged 5/8 in 9.750 in 1.11 lb 1 

59334 082171593345 Bagged 3/4 in 11.250 in 1.70 lb 1 

5 


557


Individual Metric Ball-Plus Long Arm Hex Keys 










Reach 



59100 082171591006 Bagged 1.5 mm 3.031 in 0.01 lb 10 

59101 082171591013 Bagged 1.27 mm 2.922 in 0.01 lb 10 

59102 082171591020 Bagged 2 mm 3.228 in 0.01 lb 10 

59104 082171591044 Bagged 2.5 mm 3.484 in 0.03 lb 10 

59106 082171591068 Bagged 3 mm 3.858 in 0.03 lb 10 

59107 082171591075 Bagged 3.5 mm 3.976 in 0.03 lb 10 

59108 082171591082 Bagged 4 mm 4.094 in 0.03 lb 10 

59110 082171591105 Bagged 5 mm 4.567 in 0.06 lb 10 

59112 082171591129 Bagged 6 mm 5.433 in 0.08 lb 10 

59113 082171591136 Bagged 7 mm 5.769 in 0.09 lb 10 

59114 082171591143 Bagged 8 mm 6.181 in 0.12 lb 10 

59115 082171591150 Bagged 9 mm 6.575 in 0.20 lb 10 

59116 082171591167 Bagged 10 mm 6.614 in 0.29 lb 10 

59117 082171591174 Bagged 11 mm 7.421 in 0.58 lb 10 

59118 082171591181 Bagged 12 mm 8.228 in 0.58 lb 2 

59120 082171591204 Bagged 14 mm 9.054 in 0.90 lb 2 

59122 082171591228 Bagged 17 mm 9.685 in 1.20 lb 1 

59124 082171591242 Bagged 19 mm 10.846 in 1.90 lb 1 

10 Pc. SAE Ball-Plus T-Thru Handle Set 


■■Dual Material T-Handle Provides Superior Strength and Ultimate 

Comfort for Extra Torque and Safety 

■■T-Thru Handle Design Has A Long Arm with Ball End for Access 

and A Standard Hex Short Arm for High Torque 

■■Ball-Plus Hex Permits An Entry Angle Up to 25° to Work in 






■■Color Coded for Quick Identification: SAE - Green, Metric Blue 

Cat. No. UPC No. Packaging Key Sizes Product Weight Shelf Pack Qty. 

56656G 082171566561 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 2.96 lb 1 

558


8 Pc. Metric Ball-Plus T-Thru Handle Set 




■■T-Thru Handle Design Has A Long Arm with Ball End for Access 

and A Standard Hex Short Arm for High Torque 









56660G 082171566608 Boxed 2, 2.5, 3, 4, 5, 6, 8, 10 2.74 lb 1 

8 Pc. SAE Dual Material T-Handle Set 










56650G 082171566509 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 1.05 lb 1 

5 

8 Pc. Metric Dual Material T-Handle Set 










56652G 082171566523 Boxed 2, 2.5, 3, 4, 5, 6, 8, 10 1.67 lb 1 


559


10 Pc. SAE 6" Cushion Grip T-Handle Set with Metal Stand 



■■Cushion Grip T-Handle Features A Comfortable Slip-Resistant 

Grip Which Provides Extra Torque and Safety 






56064 082171560644 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 4.40 lb 1 


57300 3/32" Cushion Grip T Handle 6" Length 57310 3/16" Cushion Grip T Handle 6" Length 






10 Pc. SAE 9" Cushion Grip T-Handle Set with Metal Stand 









■■Longer Length Hex Shaft for Extended Reach 


56163 082171561634 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 3.25 lb 1 







560


8 Pc. SAE 6" Cushion Grip T-Handle Set 










56161 082171561610 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 8.50 lb 3 






8 Pc. SAE 9" Cushion Grip T-Handle Set 










5 


56164 082171561641 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/5 1.08 lb 2 







561


5 Pc. Metric 6" Cushion Grip T-Handle Set 










56093 082171560934 Boxed 2.5, 3, 4, 5, 6 0.55 lb 3 


57842 2.5mm Cushion Grip T Handle 6" Length 57848 5mm Cushion Grip T Handle 6" Length 

57844 3mm Cushion Grip T Handle 6" Length 57850 6mm Cushion Grip T Handle 6" Length 

57846 4mm Cushion Grip T Handle 6" Length 


Individual SAE 6" Cushion Grip T-Handles 










57300 082171573002 Bagged 3/32 in 6 in 0.05 lb 10 

57302 082171573026 Bagged 7/64 in 6 in 0.05 lb 10 

57304 082171573040 Bagged 1/8 in 6 in 0.06 lb 10 

57306 082171573064 Bagged 9/64 in 6 in 0.07 lb 10 

57308 082171573088 Bagged 5/32 in 6 in 0.10 lb 10 

57310 082171573101 Bagged 3/16 in 6 in 0.17 lb 10 

57312 082171573125 Bagged 7/32 in 6 in 0.15 lb 10 

57314 082171573149 Bagged 1/4 in 6 in 0.18 lb 10 

57316 082171573163 Bagged 5/16 in 6 in 0.45 lb 5 

57318 082171573187 Bagged 3/8 in 6 in 0.45 lb 5 

562


Individual SAE 9" Cushion Grip T-Handles 











58250 082171582509 Bagged 3/32 in 9 in 0.06 lb 10 

58252 082171582523 Bagged 7/64 in 9 in 0.09 lb 10 

58254 082171582547 Bagged 1/8 in 9 in 0.07 lb 10 

58256 082171582561 Bagged 9/64 in 9 in 0.09 lb 10 

58258 082171582585 Bagged 5/32 in 9 in 0.10 lb 10 

58260 082171582608 Bagged 3/16 in 9 in 0.17 lb 10 

58262 082171582622 Bagged 7/32 in 9 in 0.26 lb 10 

58264 082171582646 Bagged 1/4 in 9 in 0.26 lb 10 

58266 082171582660 Bagged 5/16 in 9 in 0.58 lb 5 

58268 082171582684 Bagged 3/8 in 9 in 0.65 lb 5 

Individual Metric 6" Cushion Grip T-Handles 










57841 082171578410 Bagged 2 mm 6 in 0.65 lb 10 

57842 082171578427 Bagged 2.5 mm 6 in 0.05 lb 10 

57844 082171578441 Bagged 3 mm 6 in 0.06 lb 10 

57846 082171578465 Bagged 4 mm 6 in 0.18 lb 10 

57848 082171578489 Bagged 5 mm 6 in 0.25 lb 10 

57850 082171578502 Bagged 6 mm 6 in 0.25 lb 10 

5 


563


11 Pc. SAE/Metric Ball-Plus Cushion Grip T-Handle Set 












56134 082171561344 Boxed 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 4, 5, 6, 8, 10 5.50 lb 1 


57610 5/32" Cushion Grip T Handle 6" Length with Ball-Plus Ball End 57636 4mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 





57620 3/8" Cushion Grip T Handle 6" Length with Ball-Plus Ball End 


10 Pc. SAE Ball-Plus Cushion Grip T-Handle Set 












56130 082171561306 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 3.00 lb 1 


57602 3/32" Cushion Grip T Handle 57612 3/16" Cushion Grip T Handle 6" Length with Ball-Plus Ball End 

57604 7/64" Cushion Grip T Handle 57614 7/32" Cushion Grip T Handle 6" Length with Ball-Plus Ball End 

57606 1/8" Cushion Grip T Handle 6" Length with Ball-Plus Ball End 57616 1/4" Cushion Grip T Handle 6" Length with Ball-Plus Ball End 



564


6 Pc. SAE Ball-Plus Cushion Grip T-Handle Set 












56131 082171561313 Boxed 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 2.73 lb 1 





7 Pc. Metric Ball-Plus Cushion Grip T-Handle Set 











5 


56132 082171561320 Boxed 2.5, 3, 4, 5, 6, 8, 10 2.90 lb 1 


57632 2.5mm Ball Plus Cushion Grip T Handle 6" Length 57640 6mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 

57634 3mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 57642 8mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 

57636 4mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 57644 10mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 

57638 5mm Cushion Grip T Handle 6" Length with Ball-Plus Ball End 


565


Individual SAE Ball-Plus Cushion Grip T-Handles 












57602 082171576027 Bagged 3/32 in 6 in 0.06 lb 5 

57604 082171576041 Bagged 7/64 in 6 in 0.20 lb 5 

57606 082171576065 Bagged 1/8 in 6 in 0.05 lb 5 

57608 082171576089 Bagged 9/64 in 6 in 0.09 lb 5 

57610 082171576102 Bagged 5/32 in 6 in 0.10 lb 5 

57612 082171576126 Bagged 3/16 in 6 in 0.10 lb 5 

57616 082171576164 Bagged 1/4 in 6 in 0.10 lb 5 


Individual Metric Ball-Plus Cushion Grip T-Handles 












57632 082171576324 Bagged 2.5 mm 6 in 0.10 lb 5 

57634 082171576348 Bagged 3 mm 6 in 0.10 lb 5 

57636 082171576362 Bagged 4 mm 6 in 0.10 lb 5 

57638 082171576386 Bagged 5 mm 6 in 0.10 lb 5 

57640 082171576409 Bagged 6 mm 6 in 0.15 lb 5 

57642 082171576423 Bagged 8 mm 6 in 0.20 lb 2 

57644 082171576447 Bagged 10 mm 6 in 0.20 lb 2 

566


10 Pc. SAE Plas-T-Key® T-Handle Set 



■■Plas-T-Key® T-Handle Features A Plastic Grip Which Provides 

Durability and Extra Torque 





■■Hex Shafts Progress in Length Based on Hex Size 


56112 082171561122 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 2.60 lb 1 


57500 3/32" Plas-T-Key T Handle 57510 3/16" Plas-T-Key T Handle 

57502 7/64" Plas-T-Key T Handle 58412 7/32" Plas-T-Key T Handle 4.5" Length 




Individual SAE Plas-T-Key® T-Handles 











57500 082171575006 Bagged 3/32 in 1.88 in 0.05 lb 10 

57502 082171575020 Bagged 7/64 in 2.13 in 0.06 lb 10 

57504 082171575044 Bagged 1/8 in 2.30 in 0.06 lb 10 

57506 082171575068 Bagged 9/64 in 2.50 in 0.06 lb 10 

57508 082171575082 Bagged 5/32 in 2.70 in 0.07 lb 10 

57510 082171575105 Bagged 3/16 in 3.10 in 0.07 lb 10 

58400 082171584008 Bagged 3/32 in 4.50 in 0.06 lb 10 

58402 082171584022 Bagged 7/64 in 4.50 in 0.07 lb 10 

58404 082171584046 Bagged 1/8 in 4.50 in 0.07 lb 10 

58406 082171584060 Bagged 9/64 in 4.50 in 0.09 lb 10 

58408 082171584084 Bagged 5/32 in 4.50 in 0.09 lb 10 

58410 082171584107 Bagged 3/16 in 4.50 in 0.10 lb 10 

58412 082171584121 Bagged 7/32 in 4.50 in 0.12 lb 10 

58414 082171584145 Bagged 1/4 in 4.50 in 0.20 lb 10 

58416 082171584169 Bagged 5/16 in 4.50 in 0.20 lb 10 

58418 082171584183 Bagged 3/8 in 4.50 in 0.20 lb 10 

5 


567


Individual Metric Plas-T-Key® T-Handles 











57830 082171578304 Bagged 2 mm 4.50 in 0.04 lb 10 

57832 082171578328 Bagged 2.5 mm 4.50 in 0.05 lb 10 

57834 082171578342 Bagged 3 mm 4.50 in 0.06 lb 10 

57836 082171578366 Bagged 4 mm 4.50 in 0.06 lb 10 

57838 082171578380 Bagged 5 mm 4.50 in 0.20 lb 10 

57840 082171578403 Bagged 6 mm 4.50 in 0.20 lb 10 


10-Key SAE 6" Loop Handle Hex Key Set 



■■Loop Handle Hex Keys Offer the Extra Torque of A T-Handle Key 

in An Economical Option 






56255D 082171562556 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 1.59 lb 3 


57320 3/32" One Piece Loop T Handle 6" Length 57325 3/16" One Piece Loop T Handle 6" Length 





568












56257D 082171562570 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 0.68 lb 3 






8-Key Metric 6" Loop Handle Hex Key Set 









5 


56259 082171562594 Boxed 2, 2.5, 3, 4, 5, 6, 8, 10 1.57 lb 3 


57860 2mm One Piece Loop T Handle 6" Length 57864 5mm One Piece Loop T Handle 6" Length 

57861 2.5mm One Piece Loop T Handle 6" Length 57865 6mm One Piece Loop T Handle 6" Length 




569


Individual SAE 6" Loop Handle Hex Keys 










57320 082171573200 Bagged 3/32 in 6 in 0.25 lb 10 

57321 082171573217 Bagged 7/64 in 6 in 0.03 lb 10 

57322 082171573224 Bagged 1/8 in 6 in 0.05 lb 10 

57323 082171573231 Bagged 9/64 in 6 in 0.05 lb 10 

57324 082171573248 Bagged 5/32 in 6 in 0.07 lb 10 

57325 082171573255 Bagged 3/16 in 6 in 0.13 lb 10 

57326 082171573262 Bagged 7/32 in 6 in 0.16 lb 10 

57327 082171573279 Bagged 1/4 in 6 in 0.20 lb 10 

57328 082171573286 Bagged 5/16 in 6 in 0.42 lb 5 

57329 082171573293 Bagged 3/8 in 6 in 0.63 lb 5 


Individual Metric 6" Loop Handle Hex Keys 










57860 082171578601 Bagged 2 mm 6 in 0.02 lb 10 

57861 082171578618 Bagged 2.5 mm 6 in 0.07 lb 10 

57862 082171578625 Bagged 3 mm 6 in 0.08 lb 10 

57863 082171578632 Bagged 4 mm 6 in 0.09 lb 10 

57864 082171578649 Bagged 5 mm 6 in 0.15 lb 10 

57865 082171578656 Bagged 6 mm 6 in 0.20 lb 10 

57866 082171578663 Bagged 8 mm 6 in 0.56 lb 5 

57867 082171578670 Bagged 10 mm 6 in 0.60 lb 5 

570













56256D 082171562563 Boxed 

3/32, 7/64, 1/8, 9/64, 5/32, 

3/16, 7/32, 1/4, 5/16, 3/8 


2.05 lb 3 

















56258 082171562587 Boxed 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 0.89 lb 3 






5 


571


8-Key Metric 9" Loop Handle Hex Key Set 











56260 082171562600 Boxed 2, 2.5, 3, 4, 5, 6, 8, 10 12.00 lb 3 



58281 2.5mm One Piece Loop T Handle 9" Length 58285 6mm One Piece Loop T Handle 9" Length 




Individual SAE 9" Loop Handle Hex Keys 











58270 082171582707 Bagged 3/32 in 9 in 0.07 lb 10 

58271 082171582714 Bagged 7/64 in 9 in 0.07 lb 10 

58272 082171582721 Bagged 1/8 in 9 in 0.11 lb 10 

58273 082171582738 Bagged 9/64 in 9 in 0.25 lb 10 

58274 082171582745 Bagged 5/32 in 9 in 0.30 lb 10 

58275 082171582752 Bagged 3/16 in 9 in 0.35 lb 10 

58276 082171582769 Bagged 7/32 in 9 in 0.35 lb 10 

58277 082171582776 Bagged 1/4 in 9 in 0.35 lb 10 

58278 082171582783 Bagged 5/16 in 9 in 0.45 lb 5 

58279 082171582790 Bagged 3/8 in 9 in 0.55 lb 5 

572


Individual Metric 9" Loop Handle Hex Keys 











58280 082171582806 Bagged 2 mm 9 in 0.11 lb 10 

58281 082171582813 Bagged 2.5 mm 9 in 0.25 lb 10 

58282 082171582820 Bagged 3 mm 9 in 0.30 lb 10 

58283 082171582837 Bagged 4 mm 9 in 0.35 lb 10 

58284 082171582844 Bagged 5 mm 9 in 0.35 lb 10 

58285 082171582851 Bagged 6 mm 9 in 0.35 lb 10 

58286 082171582868 Bagged 8 mm 9 in 0.45 lb 5 

58287 082171582875 Bagged 10 mm 9 in 0.55 lb 5 

Handi-Hex Drivers 







■■Allen Handi-Hex Drivers are Designed General Use and 

Production Assembly Requirements 

■■Allen Handi-Hex Drivers Feature Adjustable, Replaceable Allen 

Hex Bits 

■■Includes a Key for Bit Change and Adjustment 


57400 082171574009 Bagged 0.028 in 3.385 in 0.05 lb 10 

57402 082171574023 Bagged 0.035 in 3.385 in 0.08 lb 10 

57404 082171574047 Bagged 0.050 in 3.385 in 0.08 lb 10 

57406 082171574061 Bagged 1/16 in 3.385 in 0.08 lb 10 

57408 082171574085 Bagged 5/64 in 3.385 in 0.08 lb 10 

57410 082171574108 Bagged 3/32 in 3.385 in 0.08 lb 10 

57412 082171574122 Bagged 7/64 in 3.385 in 0.10 lb 10 

57414 082171574146 Bagged 1/8 in 3.385 in 0.10 lb 10 

57416 082171574160 Bagged 9/64 in 3.385 in 0.10 lb 10 

5 


573


Handi-Hex Driver Bits 







■■For Use with Allen Handi-Hex Drivers 



57900 082171579004 Bagged 0.028 in 2 in 0.01 lb 20 

57902 082171579028 Bagged 0.035 in 2 in 0.01 lb 20 

57904 082171579042 Bagged 0.050 in 3 in 0.01 lb 20 

57906 082171579066 Bagged 1/16 in 3 in 0.01 lb 20 

57908 082171579080 Bagged 1/16 in 6 in 0.01 lb 20 

57910 082171579103 Bagged 5/64 in 3 in 0.13 lb 20 

57912 082171579127 Bagged 5/64 in 6 in 0.25 lb 20 

57914 082171579141 Bagged 3/32 in 3 in 0.01 lb 20 

57197 082171571978 Bagged 3/32 in 5 in 0.02 lb 20 

57918 082171579189 Bagged 3/32 in 6 in 0.02 lb 20 

57920 082171579202 Bagged 7/64 in 3 in 0.01 lb 20 

57199 082171571992 Bagged 7/64 in 5 in 0.35 lb 20 

57926 082171579264 Bagged 1/8 in 3 in 0.01 lb 20 

57201 082171572012 Bagged 1/8 in 5 in 0.04 lb 20 

57203 082171572036 Bagged 9/64 in 5 in 0.55 lb 20 

57205 082171572050 Bagged 5/32 in 5 in 0.04 lb 20 

57942 082171579424 Bagged 5/32 in 6 in 0.01 lb 20 

57207 082171572074 Bagged 3/16 in 6 in 0.05 lb 20 

57209 082171572098 Bagged 7/32 in 6 in 0.07 lb 20 

57211 082171572111 Bagged 1/4 in 6 in 0.09 lb 10 

57213 082171572135 Bagged 5/16 in 7 in 0.15 lb 10 

57215 082171572159 Bagged 3/8 in 7 in 0.22 lb 10 

574

W R E N C H E S 

Ratcheting.......................................... 579 

Non Ratcheting.................................. 648 

Specialty............................................ 710 

Adjustable.......................................... 780 

Ratcheting.......................................... 634 

Non Ratcheting.................................. 662 

Specialty............................................ 722 

Adjustable.......................................... 781 

6 

Specialty............................................ 786 

Adjustable.......................................... 769 


575


Wrenches 

Since being patented in 1996, GearWrench ® has been the leader in ratcheting wrenches with more styles and sizes than any other 

brand. Available in over 25 styles and 450 sizes, GearWrench has a solution for any wrenching problem. 

RATCHETING 

WRENCHES 

Patented award-winning design 

Ratcheting box end needs as little as 

5° to move fasteners versus 30° for 

standard box end wrenches 

Surface Drive ® box 

reduces fastener rounding 

Hex head set screw, 

instead of being pinned 

Flexible Head 

XL X-Beam Flex Ratcheting Wrench ® 

Up to 25% longer to access 

hard-to-reach fasteners 

X-Beam allows you to apply force 

to the flat side of the wrench, 

reducing hand fatigue 

W R E N C H E S 6 

AVAILABLE IN: 

XL Combination 

XL X-Beam 

XL Locking Flex 

XL Spline 

XL GearBox 

Reversible 

Flex 

Subby Flex 

Combination 

Stubby 

QuadBox Double Box Half Moon S-Shape E-Torx ® 

576


XL GearBox 

0° offset and slim profile to access 

the tightest spaces and recessed 

fasteners 

Longer beam increases 

leverage to maximize torque at the 

non-ratcheting end for breaking loose 

stubborn fasteners 




Surface Drive ® box 

reduces fastener rounding 

Allows ratcheting of nuts and bolts without 

removing wrench from fastener, making jobs 

faster and easier 

Ratcheting speed with the 

access of an open end wrench 

Indexing Ratcheting Wrench 

6 




Up to 25% more torque with 

less fastener rounding 

Locking pivot joint 

Wrench pumped by piston motion 


13 locking positions 

allow access to 

hard-to-get places 

Products are covered by one or more of the following patents: 

• US 5,636,557 US 6,629,477 US 6,918,477 US 7,131,356 US 7,000,507 

US 7,165,480 US 6,868,709 US 7,231,851 US 6,840,141 

577


Wrenches 

Armstrong ® wrenches are made to exacting standards with Aerospace, ASME, and Federal Spec callouts where applicable. Wrenches 

are available in a broad range including; ratcheting, combination, box, open end, flare nut, adjustable, pump, construction, slugging, 

spanner, pipe, and chain. Openings are available from 1/4" thru 6" and 6mm thru 80mm in a variety of finishes and configurations. 

Armstrong now has dedicated products for the demanding aerospace industry as well as any user requiring the highest in quality and 

reliability. Look for the “AS” symbol stamped on many combination wrenches and select box end wrenches. All wrenches are manufactured 

from high alloy steel using the most up-to-date manufacturing process and heat treat to optimize strength and durability. 

Available individually or in a selection of sets, these precision made wrenches can handle just about any fastening application. 

AEROSPACE 

WRENCHES 

Box end outer diameter and thickness meet 

aerospace requirements for increased 

access to obstructed fasteners 

Large size stamp on both ends of the 

wrench and both sides of the wrench 

for ease in identification 

Open end has a radius design for greater strength; 

especially when compared to a hex open end 

Special plating processes and 

requirements prevents corrosion 

under the harshest of conditions 

Tighter tolerances and ultimate torque 

and cycle performance meet the 

toughest specs on the market 

The shank to box 

end transition area 

is reinforced for 

greater strength 

Box ends incorporate a 

radius corner design that 

engages the flats of the 

fastener, not the corners, 

providing up to 15-20% 

more torque while reducing 

fastener rounding, 

enhancing the turning of 

worn fasteners 

Aerospace compliant wrenches are 

stamped with the =AS= designation 

Box ends are offset a true 15° for 

clearing obstructions and knuckle 

clearance on flat surfaces 


Wrenches 

Since the introduction of the original Crescent ® wrench in the early 1900s, the Crescent brand name has become synonymous with 

adjustable wrenches. As the flagship product, Crescent has continued to focus on quality and innovation to the adjustable wrench 

category. 

Laser markings on the head for 

both Metric and SAE 

Tension spring stabilizes jaw 

and knurl adjusts easily 

ADJUSTABLE 

WRENCHES 

Plated finish resists rust and corrosion 

Wide capacity jaw allows each tool 

to work with more fastener sizes 

Wider handle provides more comfort 

and less stress on the hand 

578

R A T C H E T I N G W R E N C H E S 

■■Patented, Award Winning Design 

■■X-Beam Design has over 500% More Surface Area, Enabling 

More Force and Less Hand Fatigue 

■■One Piece Forged Beam Design - No Metal Twisting or Weak 

Spots 

■■Up to 25% Longer to Access Hard-to-Reach Fasteners 

■■Surface Drive® on Box End Provides Off-Corner Loading for 

Better Grip and Reduced Fastener Rounding 

12 Pc. 12 Point Metric XL X-Beam Ratcheting 

Combination Wrench Set 


85888 082171858888 Blow Mold Tray 4.12 lb 1 


85808 8mm XL X-Beam Combination Ratcheting Wrench 85814 14mm XL X-Beam Combination Ratcheting Wrench 







■■X-Beam Design has over 500% More Surface Area, Enabling 



Spots 




9 Pc. 12 Point SAE XL X-Beam Ratcheting 


6 




85850 5/16 XL X-Beam Combination Ratcheting Wrench" 85858 9/16 XL X-Beam Combination Ratcheting Wrench" 




85856 1/2 XL X-Beam Combination Ratcheting Wrench" 


579



■■Flexible Head with Hex Head Set Screw, Not Pinned 

■■X-Beam Design Has Over 500% More Surface Area, Enabling 


■■One Piece Forged Beam Design - No Metal Twisting 

or Weak Spots 




12 Pc. 12 Point Metric XL X-Beam Flex 

Combination Ratcheting Wrench Set 




85258 8mm XL X-Beam Flex Head Combination Ratcheting Wrench 85264 14mm XL X-Beam Flex Head Combination Ratcheting Wrench 












or Weak Spots 




9 Pc. 12 Point SAE XL X-Beam Flex 





85270 5/16 XL X-Beam Flex Head Combination Ratcheting Wrench" 85278 9/16 XL X-Beam Flex Head Combination Ratcheting Wrench" 




85276 1/2 XL X-Beam Flex Head Combination Ratcheting Wrench" 

580


■■Patented Award Winning Design 

■■Up to 25% Longer to Access Hard-To-Reach Fasteners 

■■X-Beam Allows You to Apply Force to the Flat Side of the 

Wrench, Reducing Hand Fatigue 




Spots 

12 Pc. 12 Point Metric XL X-Beam Reversible 





85308 8mm Reversible XL X-Beam Combination Ratcheting Wrench 85314 14mm Reversible XL X-Beam Combination Ratcheting Wrench 


85310D 10mm Reversible XL X-Beam Combination Ratcheting Wrench 85316 16mm Reversible XL X-Beam Combination Ratcheting Wrench 


85312D 12mm Reversible XL X-Beam Combination Ratcheting Wrench 85318 18mm Reversible XL X-Beam Combination Ratcheting Wrench 

85313 13mm Reversible XL X-Beam Combination Ratcheting Wrench 85319D 19mm Reversible XL X-Beam Combination Ratcheting Wrench 








Spots 

9 Pc. 12 Point SAE XL X-Beam Reversible 


6 




85360 5/16 Reversible XL X-Beam Combination Ratcheting Wrench 85368 9/16 Reversible XL X-Beam Combination Ratcheting Wrench 




85366 1/2 Reversible XL X-Beam Combination Ratcheting Wrench 


581






or Weak Spots 





12 Point SAE XL X-Beam Ratcheting 

Combination Wrenches 

Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 










Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 






or Weak Spots 





12 Point Metric XL X-Beam Ratcheting 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

582









or Weak Spots 


12 Point SAE XL X-Beam Reversible 

Combination Ratcheting Wrenches 

Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 










Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 








or Weak Spots 


12 Point Metric XL X-Beam Reversible 

Combination Ratcheting Wrenches 

Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 



85310D 099575853104 Carded 10 mm 0.860 in 0.220 in 0.780 in 0.300 in 7.090 in 0.15 lb 1 










Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


583







or Weak Spots 



12 Point SAE XL X-Beam Flex Combination 

Ratcheting Wrenches 

Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 










Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 







or Weak Spots 



12 Point Metric XL X-Beam Flex Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

584


■■XL Combination 20% Longer and 25% Stronger 

■■Ratcheting Box End Needs As Little As 5° to Move Fasteners vs. 

30° for Standard Wrenches 

■■Bright, Full Polish Chrome Finish 



16 Pc. 12 Point Metric XL Combination Ratcheting 

Wrench Set with V Rack 


85099 082171850998 Carded 8.26 lb 1 


85008D 8mm XL Ratcheting Combination Wrench 85016 16mm XL Ratcheting Combination Wrench 

85009 9mm XL Ratcheting Combination Wrench 85017 17mm XL Ratcheting Combination Wrench 






85015 15mm XL Ratcheting Combination Wrench 85024D 24mm XL Ratcheting Combination Wrench 








Wrench Set with Wrench Roll 

6 


85099R 082171850929 Boxed 8.64 lb 1 









85015 15mm XL Ratcheting Combination Wrench 85024D 24mm XL Ratcheting Combination Wrench 


585



■■Ratcheting Box End Needs as Little As 5° to Move Fasteners vs. 





13 Pc. 12 Point SAE XL Combination Ratcheting 



85199 082171851995 Carded 7.62 lb 1 


85108 1/4" XL Ratcheting Combination Wrench 85122D 11/16" XL Ratcheting Combination Wrench 


85112 3/8" XL Ratcheting Combination Wrench 85126 13/16" XL Ratcheting Combination Wrench 



85118 9/16" XL Ratcheting Combination Wrench 85132 1" XL Ratcheting Combination Wrench 

85120D 5/8" XL Ratcheting Combination Wrench 











85199R 082171851919 Boxed 3.65 lb 1 







85118 9/16" XL Ratcheting Combination Wrench 85132 1" XL Ratcheting Combination Wrench 

85120D 5/8" XL Ratcheting Combination Wrench 

586











85098 082171850981 Carded 4.12 lb 1 









■■Ratcheting Box End Needs As Little as 5° to Move Fasteners vs. 







6 


85090R 082171850905 Boxed 3.45 lb 1 








587











85198 082171851988 Carded 3.12 lb 1 
















85197R 082171851971 Boxed 3.25 lb 1 





85118 9/16" XL Ratcheting Combination Wrench 

588








12 Point SAE XL Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













85132 082171851322 Carded 1 in 2.090 in 0.460 in 1.750 in 0.570 in 14.500 in 1.39 lb 1 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 







12 Point Metric XL Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 


















Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


589





■■The Original Patented Ratcheting Wrench 



16 Pc. 12 Point Metric Combination Ratcheting 

Wrench Set 


9416 082171094163 Carded 6.67 lb 1 


9108D 8mm Combination Ratcheting Wrench 9116D 16mm Combination Ratcheting Wrench 

9109 9mm Combination Ratcheting Wrench 9117D 17mm Combination Ratcheting Wrench 


9111 11mm Combination Ratcheting Wrench 9119 19mm Combination Ratcheting Wrench 


9113D 13mm Combination Ratcheting Wrench 9121 21mm Combination Ratcheting Wrench 










13 Pc. 12 Point SAE Combination Ratcheting 

Wrench Set 


9312 082171093128 Carded 5.96 lb 1 


9008 1/4" Combination Ratcheting Wrench 9022 11/16" Combination Ratcheting Wrench 

9010D 5/16" Combination Ratcheting Wrench 9024 3/4" Combination Ratcheting Wrench 

9012D 3/8" Combination Ratcheting Wrench 9026D 13/16" Combination Ratcheting Wrench 

9014 7/16" Combination Ratcheting Wrench 9028D 7/8" Combination Ratcheting Wrench 


9018D 9/16" Combination Ratcheting Wrench 9032 1" Combination Ratcheting Wrench 

9020 5/8" Combination Ratcheting Wrench 

590









Wrench Set 
















10 Pc. 12 Point SAE/Metric Combination 

Ratcheting Wrench Set 

6 


9418 082171094187 Carded 2.04 lb 1 


9108D 8mm Combination Ratcheting Wrench 9010D 5/16" Combination Ratcheting Wrench 


9112 12mm Combination Ratcheting Wrench 9014 7/16" Combination Ratcheting Wrench 




591









Wrench Set 


9308D 082171093081 Blow Mold Tray 2.70 lb 1 








Wrench Set 








9317 082171093173 Carded 2.02 lb 1 





9016D 1/2" Combination Ratcheting Wrench 

592









Wrench Set 


9417 082171094170 Carded 2.15 lb 1 





9113D 13mm Combination Ratcheting Wrench 








Wrench Set 

6 


93005 099575930058 Carded 4.16 lb 1 




9016D 1/2" Combination Ratcheting Wrench 


593








4 Pc. 12 Point Metric Large Combination 













4 Pc. 12 Point SAE Large Combination Ratcheting 

Wrench Set 






9028D 7/8" Combination Ratcheting Wrench 9032 1" Combination Ratcheting Wrench 








Wrench Set 


93004D 099575930041 Carded 4.40 lb 1 




9113D 13mm Combination Ratcheting Wrench 

594









Wrench Set 


9304 082171093043 Carded 0.88 lb 1 



9014 7/16" Combination Ratcheting Wrench 9018D 9/16" Combination Ratcheting Wrench 








Wrench Set 

6 


9404 082171094040 Carded 0.45 lb 1 





595








12 Point SAE Combination Ratcheting Wrenches 



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 















9034 082171090349 Carded 1-1/16 in 2.220 in 0.571 in 1.929 in 0.610 in 14.142 in 1.32 lb 1 


9038D 082171090387 Carded 1-1/4 in 2.634 in 0.508 in 2.283 in 0.689 in 16.764 in 2.18 lb 1 








9050D 082171090509 Boxed 1-3/4 in 3.626 in 0.791 in 2.835 in 0.925 in 24.213 in 5.64 lb 1 



9056D 082171090561 Boxed 2 in 4.134 in 0.835 in 3.150 in 1.043 in 25.787 in 8.34 lb 1 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

596








12 Point Metric Combination 



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 
























9136 082171091360 Boxed 36 mm 3.114 in 0.646 in 2.520 in 0.807 in 19.685 in 4.45 lb 1 

9141D 082171091414 Boxed 41 mm 3.409 in 0.709 in 2.677 in 0.866 in 22.638 in 5.73 lb 1 

9146D 082171091469 Boxed 45 mm 3.850 in 0.835 in 2.992 in 0.984 in 25.394 in 7.92 lb 1 

9150 082171091506 Boxed 50 mm 4.134 in 0.835 in 3.150 in 1.043 in 25.787 in 8.78 lb 1 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


597








■■Stubby Length for Tight Access Areas 

10 Pc. 12 Point Metric Stubby Combination 





9510DD 10mm Stubby Combination Ratcheting Wrench 9515D 15mm Stubby Combination Ratcheting Wrench 

9511D 11mm Stubby Combination Ratcheting Wrench 9516D 16mm Stubby Combination Ratcheting Wrench 












7 Pc. 12 Point SAE Stubby Combination 





9500DD 3/8" Stubby Combination Ratcheting Wrench 9504D 5/8" Stubby Combination Ratcheting Wrench 

9501DD 7/16" Stubby Combination Ratcheting Wrench 9505D 11/16" Stubby Combination Ratcheting Wrench 

9502D 1/2" Stubby Combination Ratcheting Wrench 9506D 3/4" Stubby Combination Ratcheting Wrench 

9503D 

9/16" Stubby Combination Ratcheting Wrench 

598









12 Point SAE Stubby Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 

9500DD 082171095009 Carded 3/8 in 0.862 in 0.224 in 0.780 in 0.303 in 3.701 in 0.08 lb 1 

9501DD 082171095016 Carded 7/16 in 0.953 in 0.252 in 0.854 in 0.323 in 4.016 in 0.15 lb 1 






Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 








12 Point Metric Stubby Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 

9510DD 082171095108 Carded 10 mm 0.862 in 0.224 in 0.780 in 0.303 in 3.701 in 0.08 lb 1 










Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


599


■■15° Offset Offers Increased Clearance 

■■Flush Mounted Reversing Lever Improves Access 

■■72 Teeth Ratcheting Box End Needs As Little As 5° to Move 

Fasteners Versus 30° for Standard Box End Wrenches 



16 Pc. 12 Point Metric Reversible Combination 



9602N 082171096020 Carded 7.54 lb 1 


9608N 8mm Reversible Combination Ratcheting Wrench 9616N 16mm Reversible Combination Ratcheting Wrench 
















Ratcheting Wrench Set with Wrench Roll 


9602RN 082171960215 Pouch 7.85 lb 1 










600








13 Pc. 12 Point SAE Reversible Combination 



9509N 082171095092 Carded 6.65 lb 1 


9525ND 5/16" Reversible Combination Ratcheting Wrench 9531ND 11/16" Reversible Combination Ratcheting Wrench 

9521ND 11/32" Reversible Combination Ratcheting Wrench 9532N 3/4" Reversible Combination Ratcheting Wrench 


9527N 7/16" Reversible Combination Ratcheting Wrench 9538N 7/8" Reversible Combination Ratcheting Wrench 


9529N 9/16" Reversible Combination Ratcheting Wrench 9540N 1" Reversible Combination Ratcheting Wrench 

9530ND 5/8" Reversible Combination Ratcheting Wrench 









6 


9509RN 082171950919 Pouch 6.89 lb 1 








9530ND 5/8" Reversible Combination Ratcheting Wrench 


601











9620N 082171096204 Carded 3.75 lb 1 


















9601RN 082171960116 Pouch 3.60 lb 1 







602











9533N 082171095337 Carded 2.71 lb 1 




9527N 7/16" Reversible Combination Ratcheting Wrench 9531ND 11/16" Reversible Combination Ratcheting Wrench 










6 


9567RN 082171956706 Pouch 2.30 lb 1 



9527N 7/16" Reversible Combination Ratcheting Wrench 9531ND 11/16" Reversible Combination Ratcheting Wrench 


9529N 9/16" Reversible Combination Ratcheting Wrench 


603











9543 099575095436 Carded 2.71 lb 1 
















9545N 082171954504 Carded 4.26 lb 1 




604











9601N 082171960109 Carded 4.27 lb 1 










12 Point SAE Reversible Combination Ratcheting 

Wrenches 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 

9525ND 082171095252 Carded 5/16 in 0.768 in 0.197 in 0.665 in 0.272 in 5.433 in 0.11 lb 1 



9527N 082171095276 Carded 7/16 in 0.953 in 0.252 in 0.854 in 0.323 in 6.413 in 0.16 lb 1 









9540N 082171095405 Carded 1 in 2.055 in 0.429 in 1.791 in 0.571 in 14.000 in 1.32 lb 1 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


605








12 Point Metric Reversible Combination 



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 

9608N 082171096082 Carded 8 mm 0.768 in 0.197 in 0.665 in 0.272 in 5.433 in 0.10 lb 1 
















Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


■■Locking Flexible Head 





12 Pc. 12 Point Metric XL Locking Flex Ratcheting 

Wrench Set 


85698 082171856983 Carded 4.35 lb 1 


85608 8mm XL Locking Flex-Head Ratcheting Combination Wrench 85614 14mm XL Locking Flex-Head Ratcheting Combination Wrench 






606







12 Pc. 12 Point Metric XL Locking Flex Ratcheting 



85698R 082171856907 Pouch 4.40 lb 1 













8 Pc. 12 Point SAE XL Locking Flex Ratcheting 

Wrench Set 

6 


85798 082171857980 Carded 2.69 lb 1 


85710 5/16" Flex-Head Combination Ratcheting Wrench 85718 9/16" Flex-Head Combination Ratcheting Wrench 


85714D 7/16" Flex-Head Combination Ratcheting Wrench 85722 11/16" Flex-Head Combination Ratcheting Wrench 

85716 1/2" Flex-Head Combination Ratcheting Wrench 85724D 3/4" Flex-Head Combination Ratcheting Wrench 


607







8 Pc. 12 Point SAE XL Locking Flex Ratcheting 



85798R 082171857997 Pouch 2.80 lb 1 













12 Point SAE XL Locking Flex 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 









Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

608








12 Point Metric XL Locking Flex 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

■■Flexible Head 

■■Knurled Side Beam for Ratcheting Direction Indicator 





16 Pc. 12 Point Metric Flex Combination 


6 


9902D 082171099021 Carded 9.00 lb 1 


9908D 8mm Flex-Head Combination Ratcheting Wrench 9916D 16mm Flex-Head Combination Ratcheting Wrench 

9909D 9mm Flex-Head Combination Ratcheting Wrench 9917 17mm Flex-Head Combination Ratcheting Wrench 








609








13 Pc. 12 Point SAE Flex Combination Ratcheting 

Wrench Set 


9702D 082171097027 Carded 7.20 lb 1 







9709 9/16" Flex-Head Combination Ratcheting Wrench 9716D 1" Flex-Head Combination Ratcheting Wrench 

9710 5/8" Flex-Head Combination Ratcheting Wrench 








12 Pc. 12 Point Metric Flex Combination 



9901D 082171099014 Carded 6.80 lb 1 








610









Wrench Set 


9701 082171097010 Carded 2.46 lb 1 













Wrench Set 

6 


9700 082171097003 Carded 2.86 lb 1 





9709 9/16" Flex-Head Combination Ratcheting Wrench 


611








7 Pc. 12 Point Metric Flex Combination Ratcheting 

Wrench Set 


9900D 082171099007 Carded 2.86 lb 1 





9914D 14mm Flex-Head Combination Ratcheting Wrench 








Wrench Set 



9703 082171970306 Carded 4.85 lb 1 



9714D 7/8" Flex-Head Combination Ratcheting Wrench 9716D 1" Flex-Head Combination Ratcheting Wrench 







4 Pc. 12 Point Metric Flex Combination Ratcheting 

Wrench Set 


9903D 082171099038 Carded 4.85 lb 1 




612









12 Point SAE Flex Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













9716D 082171097164 Carded 1 in 2.055 in 0.429 in 1.791 in 0.571 in 13.114 in 1.32 lb 1 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 








12 Point Metric Flex Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 

















Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


613









10 Pc. 12 Point Metric Stubby Flex Combination 



9550 082171095504 Carded 2.91 lb 1 


9551 10mm Stubby Flex-Head Combination Ratcheting Wrench 9556 15mm Stubby Flex-Head Combination Ratcheting Wrench 

9552 11mm Stubby Flex-Head Combination Ratcheting Wrench 9557D 16mm Stubby Flex-Head Combination Ratcheting Wrench 

9553D 12mm Stubby Flex-Head Combination Ratcheting Wrench 9558 17mm Stubby Flex-Head Combination Ratcheting Wrench 











7 Pc. 12 Point SAE Stubby Flex Combination 



9570 082171095702 Carded 2.20 lb 1 


9571 3/8" Stubby Flex-Head Combination Ratcheting Wrench 9575 5/8" Stubby Flex-Head Combination Ratcheting Wrench 



9574 9/16" Stubby Flex-Head Combination Ratcheting Wrench 

614







12 Point SAE Stubby Flex Combination 



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 








Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 






12 Point Metric Stubby Flex Combination 



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 











Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


615


■■XL GearBox Design Has a Longer Beam to Increase Leverage 

and Torque 

■■Non-Ratcheting End for Breaking Loose Stubborn Fasteners 

■■0° Offset and Slim Profile to Access the Tightest Spaces and 

Recessed Fasteners 



12 Pc. 12 Point Metric XL GearBox Double Box 





85908 8mm 12 Point Full Polish XL GearBox Ratcheting Wrench 85914 14mm 12 Point Full Polish XL GearBox Ratcheting Wrench 








and Torque 



















85916 16mm 12 Point Full Polish XL GearBox Ratcheting Wrench 

616



and Torque 













85922 22mm 12 Point Full Polish XL GearBox Ratcheting Wrench 

13 Pc. 12 Point SAE XL GearBox Double Box 



and Torque 






6 




85950 5/16" 12 Point Full Polish XL GearBox Ratcheting Wrench 85962 11/16" 12 Point Full Polish XL GearBox Ratcheting Wrench 





85958 9/16" 12 Point Full Polish XL GearBox Ratcheting Wrench 85972 1" 12 Point Full Polish XL GearBox Ratcheting Wrench 

85960 5/8" 12 Point Full Polish XL GearBox Ratcheting Wrench 


617



and Torque 















85956 1/2" 12 Point Full Polish XL GearBox Ratcheting Wrench 





and Torque 










85968 7/8" 12 Point Full Polish XL GearBox Ratcheting Wrench 85972 1" 12 Point Full Polish XL GearBox Ratcheting Wrench 

618



and Torque 







12 Point SAE XL GearBox Double Box 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 














Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


619



and Torque 






12 Point Metric XL GearBox Double Box 




Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 


















■■Work on a Wide Assortment of Fasteners Including E-Torx®, 

Square, 6-Point, Rounded 6-Point, 12-Point and Spline 

■■Spline Combination Wrench 





Overall 

Length 

Product 

Weight 

9 Pc. 12 Point SAE XL Spline Combination 



85598 099575855986 Boxed 3.14 lb 1 

Shelf Pack 

Qty. 


85548 Spline Ratcheting Wrench #8 spline x 1/4" 85558D Spline Ratcheting Wrench #18 spline x 9/16" 

85550D Spline Ratcheting Wrench #10 spline x 5/16" 85560 Spline Ratcheting Wrench #20 spline x 5/8" 

85552D Spline Ratcheting Wrench #12 spline x 3/8" 85562D Spline Ratcheting Wrench #22 spline x 11/16" 

85554D Spline Ratcheting Wrench #14 spline x 7/16" 85564 Spline Ratcheting Wrench #24 spline x 3/4" 

85556D Spline Ratcheting Wrench #16 spline x 1/2" 

620


■■Work on a Wide Assortment of Fasteners Including E-Torx®, 

Square, 6-Point, Rounded 6-Point, 12-Point and Spline 

■■Spline Combination Wrench 






End A 

Fastener Size 

12 Point SAE XL Spline Combination 


End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

85548 099575855481 Carded 1/4 in 0.610 in 0.256 in #8 0.567 in 0.181 in 5.315 in 0.07 lb 1 

85550D 099575855504 Carded 5/16 in 0.665 in 0.272 in #10 0.768 in 0.197 in 5.906 in 0.09 lb 1 








Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

■■Locking Pivot Joint Enables 13 Different Positions for Access to 

Hard-To-Get Places 

■■Unlock the Pivot Joint for Rapid Piston Pumping Motion 





12 Pc. 12 Point Metric Indexing Combination 


6 


85488 099575854880 Carded 4.39 lb 1 


85418 8mm Indexing Combination Wrench 85444 14mm Indexing Combination Wrench 

85439D 9mm Indexing Combination Wrench 85445 15mm Indexing Combination Wrench 






621









8 Pc. 12 Point SAE Indexing Combination 



85498 099575854989 Carded 2.98 lb 1 


85450 5/16" Indexing Combination Wrench 85458 9/16" Indexing Combination Wrench 










■■Surface Drive Plus on Open End: Stronger Grip, Reduces 

Fastener Rounding, Up to 25% More Torque 




12 Point SAE Indexing Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 









Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

622












12 Point Metric Indexing Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

■■Allows Ratcheting of Nuts and Bolts Without Removing Wrench 

From Fastener, Making Jobs Faster and Easier 

■■Ratcheting Speed with the Access of An Open End Wrench 



12 Pc. 12 Point Metric Open End Ratcheting 


6 


85597 099575855979 Carded 3.15 lb 1 


85508 8mm Ratcheting Open End Combination Wrench 85514D 14mm Ratcheting Open End Combination Wrench 

85509 9mm Ratcheting Open End Combination Wrench 85515 15mm Ratcheting Open End Combination Wrench 



85512D 12mm Ratcheting Open End Combination Wrench 85518 18mm Ratcheting Open End Combination Wrench 



623







8 Pc. 12 Point SAE Open End Ratcheting 



85599 099575855993 Carded 2.50 lb 1 


85570 5/16" Ratcheting Open End Combination Wrench 85578 9/16" Ratcheting Open End Combination Wrench 










Cat. No. UPC No. Fastener Size End A Width 

12 Point SAE Open End Ratcheting 


End A 

Thickness 

End B Width 

End B 

Thickness 

Overall Length 

85570 099575855702 5/16 in 0.658 in 0.197 in 0.625 in 0.256 in 5.508 in 0.12 lb 1 








Product 

Weight 

Shelf Pack 

Qty. 

624







12 Point Metric Open End Ratcheting 


Cat. No. UPC No. Fastener Size End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 


85508 099575855085 8 mm 0.658 in 0.197 in 0.625 in 0.256 in 5.508 in 0.12 lb 1 




85512D 099575855122 12 mm 0.988 in 0.260 in 0.855 in 0.323 in 6.756 in 0.24 lb 1 


85514D 099575855146 14 mm 1.152 in 0.307 in 1.020 in 0.354 in 7.504 in 0.31 lb 1 






Product 

Weight 

Shelf Pack 

Qty. 

■■QuadBox Design Has 2 Fastener Sizes in Each Box End 

■■Reversing Levers on Both Sides for Fast, Easy Access 

■■Save Weight: 4 Sizes in One Wrench! 



13 Pc. 12 Point SAE QuadBox Double Box 


6 


85200 099575852008 Carded 0.85 lb 1 


85201 QuadBox Ratcheting Wrench 5/16", 3/8", 7/16", 1/2" - 1/4" Bit Holder - T-20 Torx® Bit 

85202D QuadBox Ratcheting Wrench 9/16", 5/8", 11/16", 3/4" - 1/4" Slotted Bit - T-25 Torx® Bit 

- #1 Phillips Bit - 5/32" Slotted Bit - T-27 Torx® Bit 

- #2 Phillips Bit - 7/32" Slotted Bit 

- #3 Phillips Bit - T-15 Torx® Bit 


625







13 Pc. 12 Point Metric QuadBox Double Box 



85210D 099575852107 Carded 0.90 lb 1 


85211 QuadBox Ratcheting Wrench 8mm, 10mm, 12mm, 13mm - 1/4" Bit Holder - T-20 Torx® Bit 

85212 QuadBox Ratcheting Wrench 16mm, 17mm, 18mm, 19mm - 1/4" Slotted Bit - T-25 Torx® Bit 

- #1 Phillips Bit - 5/32" Slotted Bit - T-27 Torx® Bit 








3 Pc. 12 Point SAE QuadBox Double Box 




85204 099575852046 Boxed 2.02 lb 1 


85201 QuadBox Ratcheting Wrench 5/16", 3/8", 7/16", 1/2" 85203 QuadBox Ratcheting Wrench 13/16", 7/8", 15/16", 1" 

85202D QuadBox Ratcheting Wrench 9/16", 5/8", 11/16", 3/4" 






4 Pc. 12 Point Metric QuadBox Double Box 



85215 099575852152 Boxed 2.25 lb 1 


85211 QuadBox Ratcheting Wrench 8mm, 10mm, 12mm, 13mm 85212 QuadBox Ratcheting Wrench 16mm, 17mm, 18mm, 19mm 

85213 QuadBox Ratcheting Wrench 9mm, 11mm, 14mm, 15mm 85214 QuadBox Ratcheting Wrench 20mm, 21mm, 22mm, 24mm 

626








12 Point SAE QuadBox Double Box 


End A Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B Fastener 

Size 

End B 

Width 

End B 

Thickness 

85201 099575852015 Carded 5/16 in, 3/8 in 0.780 in 0.470 in 7/16 in, 1/2 in 0.980 in 0.590 in 6.300 in 0.19 lb 1 

85202D 099575852022 Carded 9/16 in, 5/8 in 1.200 in 0.670 in 11/16 in, 3/4 in 1.340 in 0.750 in 8.270 in 0.44 lb 1 

85203 099575852039 Carded 13/16 in, 7/8 in 1.540 in 0.910 in 15/16 in, 1 in 1.790 in 1.100 in 11.420 in 1.04 lb 1 

Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 






12 Point Metric QuadBox Double Box 




Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

85211 099575852114 Carded 8 mm, 10 mm 0.780 in 0.470 in 12 mm, 13 mm 0.980 in 0.590 in 6.300 in 0.18 lb 1 




Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

6 

■■Quadbox Design Has 2 Fastener Sizes in Each Box End 



■■HVAC Square and Hex Tool 



SAE QuadBox HVAC Ratcheting Wrenches 


End A 

Drive 

Type 

End B 

Drive 

Type 

85220D 099575852206 Carded Square Square 

85221 099575852213 Carded Square 6 Point 

End A 

Fastener 

Size 

1/4 in, 

3/16 in 

1/4 in, 

3/16 in 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

0.780 in 0.496 in 3/8 in, 5/16 in 0.850 in 0.488 in 5.512 in 0.19 lb 1 

0.780 in 0.496 in 9/16 in , 1/2 in 1.035 in 0.598 in 6.890 in 0.27 lb 1 

Shelf 

Pack 

Qty. 


627





6 Pc. 12 Point Metric Double Box Ratcheting 

Wrench Set 


9260 082171092602 Carded 1.60 lb 1 


9210D 8mm x 9mm Double Box Ratcheting Wrench 9213 14mm x 15mm Double Box Ratcheting Wrench 

9211D 10mm x 11mm Double Box Ratcheting Wrench 9214 16mm x 18mm Double Box Ratcheting Wrench 

9212D 12mm x 13mm Double Box Ratcheting Wrench 9215D 17mm x 19mm Double Box Ratcheting Wrench 




4 Pc. 12 Point SAE Double Box Ratcheting 

Wrench Set 



9240D 082171092404 Carded 1.13 lb 1 


9201D 5/16" x 3/8" Double Box Ratcheting Wrench 9203 9/16" x 5/8" Double Box Ratcheting Wrench 

9202D 7/16" x 1/2" Double Box Ratcheting Wrench 9204D 11/16" x 3/4" Double Box Ratcheting Wrench 




12 Point SAE Double Box Ratcheting Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

9201D 082171092015 Carded 5/16 in 0.665 in 0.272 in 3/8 in 0.705 in 0.272 in 5.118 in 0.13 lb 1 


9203 082171092039 Carded 9/16 in 1.035 in 0.370 in 5/8 in 1.201 in 0.406 in 7.480 in 0.31 lb 1 


Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

628





12 Point Metric Double Box Ratcheting Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

9210D 082171092107 Carded 8 mm 0.665 in 0.272 in 9 mm 0.705 in 0.272 in 5.118 in 0.11 lb 1 



9213 082171092138 Carded 14 mm 1.035 in 0.370 in 15 mm 1.130 in 0.390 in 7.480 in 0.27 lb 1 



Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

■■Slim Half Moon Design Allows for Easy Access Around 

Obstructions 



5 Pc. 12 Point Metric Half Moon Reversible Double 

Box Ratcheting Wrench Set 


9850 082171098505 Carded 2.61 lb 1 

6 


9851D 10mm x 12mm Half-Moon Double Box Ratcheting Wrench 9854 15mm x 17mm Half-Moon Double Box Ratcheting Wrench 

9852D 11mm x 13mm Half-Moon Double Box Ratcheting Wrench 9855D 19mm x 22mm Half-Moon Double Box Ratcheting Wrench 

9853 14mm x 16mm Half-Moon Double Box Ratcheting Wrench 


Obstructions 



4 Pc. 12 Point SAE Half Moon Reversible Double 




9840D 082171098406 Carded 2.33 lb 1 


9841D 3/8" x 7/16" Half-Moon Double Box Ratcheting Wrench 9843D 5/8" x 11/16" Half-Moon Double Box Ratcheting Wrench 

9842 1/2" x 9/16" Half-Moon Double Box Ratcheting Wrench 9844 3/4" x 7/8" Half-Moon Double Box Ratcheting Wrench 

629



Obstructions 



12 Point SAE Half Moon Reversible Double Box 



End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 





Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


Obstructions 



12 Point Metric Half Moon Reversible Double Box 




End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 






■■Slim S-Shape Design Allows for Easy Access Around 

Obstructions 



Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

5 Pc. 12 Point Metric S-Shape Reversible Double 



85299 082171852992 Carded 2.73 lb 1 


85222 10mm x 12mm Reversible "S-shaped" Double Box Ratcheting Wrench 85232 15mm x 17mm Reversible "S-shaped" Double Box Ratcheting Wrench 

85224 11mm x 13mm Reversible "S-shaped" Double Box Ratcheting Wrench 85241D 19mm x 22mm Reversible "S-shaped" Double Box Ratcheting Wrench 

85230 14mm x 16mm Reversible "S-shaped" Double Box Ratcheting Wrench 

630



Obstructions 



4 Pc. 12 Point SAE S-Shape Reversible Double 



85399 082171853999 Carded 2.40 lb 1 


85326 3/8" x 7/16" Reversible "S-shaped" Double Box Ratcheting Wrench 85342 5/8" x 11/16" Reversible "S-shaped" Double Box Ratcheting Wrench 

85334 1/2" x 9/16" Reversible "S-shaped" Double Box Ratcheting Wrench 85352 3/4" x 7/8" Reversible "S-shaped" Double Box Ratcheting Wrench 


Obstructions 



12 Point SAE S-Shape Reversible Double Box 


6 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 





Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


Obstructions 



12 Point Metric S-Shape Reversible Double Box 




End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 






Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

631


■■E-Torx® Design 




4 Pc. E-Torx® Double Box Ratcheting Wrench Set 


9224D 082171092244 Carded 1.00 lb 1 


9220D E6 x E8 Torx Double Box Ratcheting Wrench 9222 E14 x E18 Torx Double Box Ratcheting Wrench 

9221 E10 x E12 Torx Double Box Ratcheting Wrench 9223 E20 x E24 Torx Double Box Ratcheting Wrench 

■■E-Torx® Design 




E-Torx® Double Box Ratcheting Wrenches 



End A 

Fastener Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

9220D 082171092206 Carded E6 0.630 in 0.689 in E8 0.256 in 0.272 in 5.118 in 0.06 lb 1 

9221 082171092213 Carded E10 0.748 in 0.811 in E12 0.287 in 0.303 in 5.906 in 0.11 lb 1 



■■Converts a 1/2" Ratcheting Wrench to a Ratcheting Bit Driver 

■■For Use with 1/4" and 5/16" Bits 

2 Pc. Access Bit Adapter Set 

Overall 

Length 

Product 

Weight 


9535D 082171095351 Carded 0.18 lb 1 

Shelf Pack 

Qty. 

632


■■Socket Adapter Converts a 3/8" Ratcheting Wrench to a 1/4" 

Drive Tang 


Drive Tang 


Drive Tang 

3 Pc. SAE Drive Adapter Set 


9231D 082171092312 Carded 0.25 lb 1 


9217 Wrench Drive Adapter 3/8" to 1/4" Drive Square 9219 Wrench Drive Adapter 3/4" to 1/2" Drive Square 

9218D Wrench Drive Adapter 1/2" to 3/8" Drive Square 

■■Socket Adapter Converts a 10mm Ratcheting Wrench to a 1/4" 

Drive Tang 


Drive Tang 


Drive Tang 

3 Pc. Metric Drive Adapter Set 


9230D 082171092305 Carded 0.25 lb 1 


9207 Wrench Drive Adapter 10mm to 1/4" Drive Square 9209D Wrench Drive Adapter 19mm to 1/2" Drive Square 

9208D Wrench Drive Adapter 13mm to 3/8" Drive Square 

6 

37 Pc. Access Bit Set with 1/2" Reversible 

Ratcheting Wrench 

Cat. No. UPC No. Packaging Product Weight 

9537N 082171095375 Carded 0.85 lb 

Cat. No. Description Cat. No. Description Cat. No. Description Cat. No. Description 

9528N 1/2" Reversible Combination Ratcheting Wrench - 7mm Hex Bit - 1/4" Hex Bit - T-20 Torx® Bit 

- Socket Adapter - 8mm Hex Bit - 5/16" Hex Bit - T-25 Torx® Bit 

- 1/4" Bit Holder - 10mm Hex Bit - 3/8" Hex Bit - T-27 Torx® Bit 

- 5/16" Bit Holder - 3/32" Hex Bit - #1 Phillips Bit - T-30 Torx® Bit 

- 2mm Hex Bit - 7/64" Hex Bit - #2 Phillips Bit - T-40 Torx® Bit 

- 2.5mm Hex Bit - 1/8" Hex Bit - #3 Phillips Bit - T-45 Torx® Bit 

- 3mm Hex Bit - 9/64" Hex Bit - 1/4" Slotted Bit - T-50 Torx® Bit 

- 4mm Hex Bit - 5/32" Hex Bit - 9/32" Slotted Bit 

- 5mm Hex Bit - 3/16" Hex Bit - T-10 Torx® Bit 

- 6mm Hex Bit - 7/32" Hex Bit - T-15 Torx® Bit 


633



■■Ratcheting Box End with Reversing Lever Speeds the Removal / 

Installation of Fasteners 

■■Ratcheting Box End Incorporates a 72 Tooth Precision Machined 

Gear for a 5° Swing Arc 

■■Ratcheting Box End is Offset 12° for Clearing Obstructions and 

Knuckle Clearance on Flat Surfaces 

■■Enclosed Ratcheting Box End Adds Strength By Reducing Dirt 

and Debris Infiltration 

■■Thin Walled, Low Profile Ratcheting Box End Allows Easier 

Access to Confined Fasteners 

7 Pc. 12 Point SAE Reversible Combination Ratcheting 



28-900 781412289008 Boxed 2.27 lb 1 


28-812 3/8" 12 Point Full Polish Reversible Combination Ratcheting Wrench 28-820 5/8" 12 Point Full Polish Reversible Combination Ratcheting Wrench 



28-818 9/16" 12 Point Full Polish Reversible Combination Ratcheting Wrench 29-432 Vinyl Roll 7 Pockets 













7 Pc. 12 Point SAE Reversible Combination Ratcheting 

Wrench Set 


28-901 781412289015 Boxed 3.21 lb 1 






634
















54-950 781412549508 Boxed 3.65 lb 1 


54-810 10mm 12 Point Full Polish Reversible Combination Ratcheting Wrench 54-816 16mm 12 Point Full Polish Reversible Combination Ratcheting Wrench 




54-814 14mm 12 Point Full Polish Reversible Combination Ratcheting Wrench - Vinyl Roll 











■■Ratcheting Box End Incorporates a Radius Corner Design That 

Engages the Flats of the Fastener, Not the Corners, Providing Up 

to 15% -20% More Torque While Reducing Fastener Rounding, 

Enhancing the Turning of Worn Fasteners 

7 Pc. 12 Point SAE Combination Ratcheting Wrench 

Set with Wrench Roll 


25-661 781412256611 Boxed 2.64 lb 1 


25-812 3/8" 12 Point Full Polish Combination Ratcheting Wrench 25-820 5/8" 12 Point Full Polish Combination Ratcheting Wrench 



25-818 9/16" 12 Point Full Polish Combination Ratcheting Wrench 29-432 Vinyl Roll 7 Pockets 

6 


635
















Wrench Set 


25-662 781412256628 Boxed 2.60 lb 1 




















10 Pc. 12 Point SAE Combination Ratcheting Wrench 



25-667 781412256673 Boxed 2.20 lb 1 






25-814 7/16" 12 Point Full Polish Combination Ratcheting Wrench 29-451 Vinyl Roll 10 Pockets 


636


















52-667 781412526677 Boxed 3.85 lb 1 


29-452 Vinyl Roll 10 Pockets 52-815 15mm 12 Point Full Polish Combination Ratcheting Wrench 

52-810 10mm 12 Point Full Polish Combination Ratcheting Wrench 52-816 16mm 12 Point Full Polish Combination Ratcheting Wrench 




52-814 14mm 12 Point Full Polish Combination Ratcheting Wrench 


■■Ratcheting Box End Speeds the Removal / Installation of 

Fasteners 







■■Both the Ratcheting Box End and Fixed Box End Incorporate a 

Radius Corner Design That Engages the Flats of the Fastener, 

Not the Corners, Providing Up to 15% -20% More Torque While 


Fasteners 

7 Pc. 12 Point SAE Double Box Ratcheting Wrench Set 

with Wrench Roll 


27-609 781412276091 Boxed 3.04 lb 1 

6 



27-510 3/8" 12 Point Full Polish Double Box Ratcheting Wrench 27-514 5/8" 12 Point Full Polish Double Box Ratcheting Wrench 



27-513 9/16" 12 Point Full Polish Double Box Ratcheting Wrench - Vinyl Roll 

637




Fasteners 











Fasteners 

10 Pc. 12 Point Metric Double Box Ratcheting Wrench 



54-609 781412546095 Boxed 4.10 lb 1 


54-510 10mm 12 Point Full Polish Double Box Ratcheting Wrench 54-516 16mm 12 Point Full Polish Double Box Ratcheting Wrench 




54-514 14mm 12 Point Full Polish Double Box Ratcheting Wrench - Vinyl Roll 



638




Fasteners 











Fasteners 

17 Pc. 12 Point SAE/Metric Double Box Ratcheting 



27-708 781412277081 Boxed 6.82 lb 1 


27-510 3/8" 12 Point Full Polish Double Box Ratcheting Wrench 54-512 12mm 12 Point Full Polish Double Box Ratcheting Wrench 








54-511 11mm 12 Point Full Polish Double Box Ratcheting Wrench - Vinyl Roll 

6 



Fasteners 











Fasteners 

4 Pc. 12 Point SAE Double Box Ratcheting Wrench Set 

with Wrench Roll 



27-704 781412277043 Boxed 1.82 lb 1 


27-517 13/16" 12 Point Full Polish Double Box Ratcheting Wrench 27-520 1" 12 Point Full Polish Double Box Ratcheting Wrench 

27-518 7/8" 12 Point Full Polish Double Box Ratcheting Wrench 29-410 Vinyl Roll 4 Pockets 


639















7 Pc. 12 Point SAE Stubby Combination Ratcheting 



27-607 781412276077 Boxed 1.40 lb 1 


27-110 3/8" 12 Point Full Polish Stubby Ratcheting Wrench 27-116 3/4" 12 Point Full Polish Stubby Ratcheting Wrench 

27-111 7/16" 12 Point Full Polish Stubby Ratcheting Wrench 27-113D 9/16" 12 Point Full Polish Stubby Ratcheting Wrench 

27-112 1/2" 12 Point Full Polish Stubby Ratcheting Wrench 27-114D 5/8" 12 Point Full Polish Stubby Ratcheting Wrench 

27-115 11/16" 12 Point Full Polish Stubby Ratcheting Wrench 29-430 Vinyl Roll 7 Pockets 















10 Pc. 12 Point Metric Stubby Combination Ratcheting 



54-607 781412546071 Boxed 2.28 lb 1 


29-450 Vinyl Roll 10 Pockets 54-115 15mm 12 Point Full Polish Stubby Combination Ratcheting Wrench 

54-110 10mm 12 Point Full Polish Stubby Combination Ratcheting Wrench 54-116 16mm 12 Point Full Polish Stubby Combination Ratcheting Wrench 




54-114 14mm 12 Point Full Polish Stubby Combination Ratcheting Wrench 

640














12 Point SAE Reversible Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 









Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 













12 Point Metric Reversible Combination 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


641















12 Point SAE Combination Ratcheting Wrenches 


Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 












642















12 Point Metric Combination Ratcheting Wrenches 


Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 















6 


5 Pc. 6 and 12 Point SAE Laminated 25° Offset Double 

Box Ratcheting Wrench Set with Wrench Roll 



27-635 781412276350 Boxed 2.20 lb 1 


27-613 6 Point 25° Offset Ratcheting Box Wrench 1/4 x 5/16" 27-622 12 Point 25° Offset Ratcheting Box Wrench 5/8 x 11/16" 

27-616 6 Point 25° Offset Ratcheting Box Wrench 3/8 x 7/16" 27-626 12 Point 25° Offset Ratcheting Box Wrench 3/4 x 7/8" 

27-619 6 Point 25° Offset Ratcheting Box Wrench 1/2 x 9/16" 29-420 Vinyl Roll 5 Pockets 

643



7 Pc. 6 and 12 Point Metric Laminated 25° Offset 

Double Box Ratcheting Wrench Set with Wrench Roll 


54-668 781412546682 Boxed 3.60 lb 1 


29-436 Vinyl Roll 7 Pockets 54-646 6 Point 25° Offset Ratcheting Box Wrench 13 x 14mm 

54-637 6 Point 25° Offset Ratcheting Box Wrench 7 x 8mm 54-649 12 Point 25° Offset Ratcheting Box Wrench 15 x 17mm 





5 Pc. 12 Point SAE Laminated Double Box Ratcheting 



27-608 781412276084 Boxed 1.88 lb 1 


27-588 12 Point Ratcheting Box Wrench 1/4 x 5/16" 27-596 12 Point Ratcheting Box Wrench 5/8 x 11/16" 

27-591 12 Point Ratcheting Box Wrench 3/8 x 7/16" 27-602 12 Point Ratcheting Box Wrench 3/4 x 7/8" 

27-594 12 Point Ratcheting Box Wrench 1/2 x 9/16" 29-420 Vinyl Roll 5 Pockets 

644



5 Pc. 12 Point Metric Laminated Double Box 



54-608 781412546088 Boxed 1.74 lb 1 


29-420 Vinyl Roll 5 Pockets 54-593 6 Point Ratcheting Box Wrench 11 x 12mm 

54-587 6 Point Ratcheting Box Wrench 7 x 8mm 54-596 6 Point Ratcheting Box Wrench 13 x 14mm 

54-590 6 Point Ratcheting Box Wrench 9 x 10mm 54-599 12 Point Ratcheting Box Wrench 15 x 17mm 



Fasteners 











Fasteners 

12 Point SAE Double Box Ratcheting Wrenches 


Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 














6 


645




Fasteners 











Fasteners 

12 Point Metric Double Box Ratcheting Wrenches 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

















646















12 Point SAE Stubby Combination 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 





















12 Point Metric Stubby Combination 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 











6 


647

N O N - R A T C H E T I N G W R E N C H E S 



or Weak Spots 



12 Pc. 12 Point Metric XL X-Beam Combination 

Wrench Set 




81698 8mm XL X-Beam Combination Wrench 81706 14mm XL X-Beam Combination Wrench 









or Weak Spots 



9 Pc. 12 Point SAE XL X-Beam Combination 

Wrench Set 




81714 5/16" XL X-Beam Combination Wrench 81721 9/16" XL X-Beam Combination Wrench 




81719 1/2" XL X-Beam Combination Wrench 

648


■■Large Size Stamp on Open End 

■■Offset Box End for Better Access 


■■Made of High Carbon Content Premium Alloy Steel 






12 Point SAE XL X-Beam 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 










Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 










12 Point Metric XL X-Beam 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 













Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


649


■■Long Pattern Length 

■■Offset Box End for Increased Access 



44 Pc. 12 Point SAE/Metric Long Pattern 



81919 099575819193 Boxed 35.33 lb 1 



81650 1/4" Long Pattern Combination Wrench 81666 9mm Long Pattern Combination Wrench 

81652D 5/16" Long Pattern Combination Wrench 81667 10mm Long Pattern Combination Wrench 












81664 1" Long Pattern Combination Wrench 81679 22mm Long Pattern Combination Wrench 

81733 1-1/16" Long Pattern Combination Wrench 81741 23mm Long Pattern Combination Wrench 



81749 1-5/16" Full Polish Combination Wrench 81752 26mm Long Pattern Combination Wrench 

81750 1-1/2" Full Polish Combination Wrench 81743 27mm Long Pattern Combination Wrench 

81736 6mm Long Pattern Combination Wrench 81753 28mm Long Pattern Combination Wrench 


81665 8mm Long Pattern Combination Wrench 81745D 32mm Long Pattern Combination Wrench 

650






24 Pc. 12 Point SAE/Metric Long Pattern 













81664 1" Long Pattern Combination Wrench 81676 19mm Long Pattern Combination Wrench 




6 





15 Pc. 12 Point SAE Long Pattern Combination 

Wrench Set 


81901 099575819018 V Rack 6.05 lb 1 


81650 1/4" Long Pattern Combination Wrench 81658 5/8" Long Pattern Combination Wrench 

81651D 9/32" Long Pattern Combination Wrench 81659 11/16" Long Pattern Combination Wrench 





81656 1/2" Long Pattern Combination Wrench 81664 1" Long Pattern Combination Wrench 



651









81917 099575819179 Boxed 12.40 lb 1 








81656 1/2" Long Pattern Combination Wrench 81733 1-1/16" Long Pattern Combination Wrench 











81918 099575819186 Boxed 12.83 lb 1 










652






15 Pc. 12 Point Metric Long Pattern Combination 

Wrench Set 


81902 099575819025 V Rack 9.55 lb 1 
















6 


81916 099575819162 Boxed 13.90 lb 1 














653









81920 099575819209 Boxed 7.82 lb 1 
















5 Pc. 12 Point SAE Large Long Pattern 



81921 099575819216 Boxed 9.94 lb 1 


81733 1-1/16" Long Pattern Combination Wrench 81749 1-5/16" Full Polish Combination Wrench 

81734 1-1/8" Long Pattern Combination Wrench 81750 1-1/2" Full Polish Combination Wrench 

81735 1-1/4" Long Pattern Combination Wrench 

654






6 Pc. 12 Point Metric Large Long Pattern 



81922 099575819223 Boxed 10.20 lb 1 














12 Point SAE Long Pattern Full Polish 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 





















Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


655










12 Point Metric Long Pattern Full Polish 




Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 


























Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

656





28 Pc. 6 Point SAE/Metric Full Polish Combination 

Wrench Set 


81923 099575819230 Boxed 14.50 lb 1 


81754 6mm 6 Point Full Polish Combination Wrench 81768 1/4" Full Polish Combination Wrench 6 Point 






81760D 12mm 6 Point Full Polish Combination Wrench 81774 9/16" Full Polish Combination Wrench 6 Point 





81765D 17mm 6 Point Full Polish Combination Wrench 81779 7/8" Full Polish Combination Wrench 6 Point 

81766 18mm 6 Point Full Polish Combination Wrench 81780D 15/16" Full Polish Combination Wrench 6 Point 

81767 19mm 6 Point Full Polish Combination Wrench 81781 1" Full Polish Combination Wrench 6 Point 

6 




14 Pc. 6 Point SAE Full Polish Combination 

Wrench Set 


81924 099575819247 Boxed 5.15 lb 1 



81768 1/4" Full Polish Combination Wrench 6 Point 81775 5/8" Full Polish Combination Wrench 6 Point 





81773 1/2" Full Polish Combination Wrench 6 Point 81780D 15/16" Full Polish Combination Wrench 6 Point 

81774 9/16" Full Polish Combination Wrench 6 Point 81781 1" Full Polish Combination Wrench 6 Point 

657





14 Pc. 6 Point Metric Full Polish Combination 

Wrench Set 


81925 099575819254 Boxed 4.85 lb 1 


81754 6mm 6 Point Full Polish Combination Wrench 81761 13mm 6 Point Full Polish Combination Wrench 




81758 10mm 6 Point Full Polish Combination Wrench 81765D 17mm 6 Point Full Polish Combination Wrench 


81760D 12mm 6 Point Full Polish Combination Wrench 81767 19mm 6 Point Full Polish Combination Wrench 











6 Point SAE Full Polish Combination Wrenches 

Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 















Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

658











6 Point Metric Full Polish Combination Wrenches 

Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 















Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 




20 Pc. 12 Point SAE/Metric Stubby Full Polish 


6 




81624 3/8" Combination Stubby Wrench 81634 10mm Combination Stubby Wrench 











659





10 Pc. 12 Point SAE Stubby Full Polish 





81624 3/8" Combination Stubby Wrench 81629 11/16" Combination Stubby Wrench 








10 Pc. 12 Point Metric Stubby Full Polish 






81634 10mm Combination Stubby Wrench 81639 15mm Combination Stubby Wrench 





660











12 Point SAE Stubby Full Polish 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 











Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 










12 Point Metric Stubby Full Polish 


Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 











Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


661



■■Both Box Ends Incorporate a Radius Corner Design That 




■■Box Ends Are Offset a True 15° for Clearing Obstructions and 


■■The Shank to Box End Transition Area is Also Reinforced to 

Provide Greater Strength 

■■Open End Has a Radius Design for Greater Strength; Especially 

When Compared to a Hex Open End 


Specification GGG-W-636E 

11 Pc. 12 Point SAE Extra Long Combination Wrench 



25-675 781412256758 Boxed 6.70 lb 1 


25-412 3/8" Full Polish Extra Long Pattern Combination Wrench 12 Point 25-424 3/4" Full Polish Extra Long Pattern Combination Wrench 12 Point 




25-420 5/8" Full Polish Extra Long Pattern Combination Wrench 12 Point 25-432 1" Full Polish Extra Long Pattern Combination Wrench 12 Point 

25-422 11/16" Full Polish Extra Long Pattern Combination Wrench 12 Point 29-458 Vinyl Roll 11 Pockets 















7 Pc. 12 Point SAE Extra Long Combination Wrench 



25-671 781412256710 Boxed 2.60 lb 1 





25-418 9/16" Full Polish Extra Long Pattern Combination Wrench 12 Point 29-432 Vinyl Roll 7 Pockets 

662



■■Meet Applicable Aerospace Standards: Sizes 5/16 Thru 1 












Wrench Set 


25-655 781412256550 Boxed 64.04 lb 1 


25-234 1-1/16" Full Polish Long Pattern Combination Wrench 12 Point 25-228* 7/8" Full Polish Long Pattern Combination Wrench 12 Point 


25-240 1-1/4" Full Polish Long Pattern Combination Wrench 12 Point 25-232* 1" Full Polish Long Pattern Combination Wrench 12 Point 

25-208* 1/4" Full Polish Long Pattern Combination Wrench 12 Point 25-242 1-5/16" Satin Chrome Long Pattern Combination Wrench 12 Point 









25-226* 13/16" Full Polish Long Pattern Combination Wrench 12 Point 25-264 2" Satin Chrome Long Pattern Combination Wrench 12 Point 

* Meets or Exceeds Aerospace Stanard AS954E-2004 

6 


663















Wrench Set 


25-652 781412256529 Boxed 29.59 lb 1 







25-208* 1/4" Full Polish Long Pattern Combination Wrench 12 Point 25-230* 15/16" Full Polish Long Pattern Combination Wrench 12 Point 

25-210* 5/16" Full Polish Long Pattern Combination Wrench 12 Point 25-232* 1" Full Polish Long Pattern Combination Wrench 12 Point 







664

















25-642 781412256420 Boxed 11.25 lb 1 









25-218* 9/16" Full Polish Long Pattern Combination Wrench 12 Point 29-468 Vinyl Roll 15 Pockets 



■■Meet Applicable Aerospace Standards 














25-637 781412256376 Boxed 6.06 lb 1 

6 








25-224* 3/4" Full Polish Long Pattern Combination Wrench 12 Point 


665



■■Meet Applicable Aerospace Standards 











7 Pc. 12 Point SAE Long Pattern Combination Wrench 



25-631 781412256314 Boxed 2.43 lb 1 





















10 Pc. 6 Point SAE Long Pattern Combination Wrench 



25-626 781412256260 Boxed 5.62 lb 1 


25-314 7/16" Full Polish Long Pattern Combination Wrench 6 Point 25-326 13/16" Full Polish Long Pattern Combination Wrench 6 Point 



25-320 5/8" Full Polish Long Pattern Combination Wrench 6 Point 25-332 1" Full Polish Long Pattern Combination Wrench 6 Point 

25-322 11/16" Full Polish Long Pattern Combination Wrench 6 Point 29-452 Vinyl Roll 10 Pockets 

25-324 3/4" Full Polish Long Pattern Combination Wrench 6 Point 

666














10 Pc. 12 Point Metric Extra Long Combination 



52-671 781412526714 Boxed 5.50 lb 1 


29-452 Vinyl Roll 10 Pockets 52-415 15mm Full Polish Extra Long Pattern Combination Wrench 12 Point 

52-410 10mm Full Polish Extra Long Pattern Combination Wrench 12 Point 52-416 16mm Full Polish Extra Long Pattern Combination Wrench 12 Point 




52-414 14mm Full Polish Extra Long Pattern Combination Wrench 12 Point 

6 


667

















52-644 781412526448 Boxed 16.92 lb 1 



52-206 6mm Full Polish Long Pattern Combination Wrench 12 Point 52-219 19mm Full Polish Long Pattern Combination Wrench 12 Point 













668













■■Large Size Stamp on Both Ends of the Wrench and Both Sides 

of the Wrench for Ease in Identification 





52-638 781412526387 Boxed 7.50 lb 1 


29-470 Vinyl Roll 18 Pockets 52-216 16mm Full Polish Long Pattern Combination Wrench 12 Point 









52-215 15mm Full Polish Long Pattern Combination Wrench 12 Point 

6 


669















52-634 781412526349 Boxed 5.34 lb 1 
























52-632 781412526325 Boxed 7.30 lb 1 










670















Wrench Set 


52-631 781412526318 Boxed 2.96 lb 1 





















Wrench Set 


52-630 781412526301 Boxed 2.70 lb 1 







6 


671



















52-627 781412526271 Boxed 3.09 lb 1 








52-311 11mm Full Polish Long Pattern Combination Wrench 6 Point 52-319 19mm Satin Chrome Long Pattern Combination Wrench 6 Point 


















52-623 781412526233 Boxed 3.67 lb 1 






52-313 13mm Full Polish Long Pattern Combination Wrench 6 Point 52-319 19mm Satin Chrome Long Pattern Combination Wrench 6 Point 


672















26 Pc. 12 Point SAE Long Pattern Satin Combination 

Wrench Set 


25-685 781412256857 Boxed 64.05 lb 1 


25-458 1/4" Satin Chrome Long Pattern Combination Wrench 12 Point 25-484 1-1/16" Satin Chrome Long Pattern Combination Wrench 12 Point 












25-482 1" Satin Chrome Long Pattern Combination Wrench 12 Point 25-264 2" Satin Chrome Long Pattern Combination Wrench 12 Point 

6 


673


















Wrench Set 


25-682 781412256826 Boxed 34.04 lb 1 



25-458 1/4" Satin Chrome Long Pattern Combination Wrench 12 Point 25-480 15/16" Satin Chrome Long Pattern Combination Wrench 12 Point 

25-460 5/16" Satin Chrome Long Pattern Combination Wrench 12 Point 25-482 1" Satin Chrome Long Pattern Combination Wrench 12 Point 










674














Wrench Set 


25-658 781412256581 Boxed 99.50 lb 1 


25-242 1-5/16" Satin Chrome Long Pattern Combination Wrench 12 Point 25-260 1-7/8" Satin Chrome Long Pattern Combination Wrench 12 Point 

25-244 1-3/8" Satin Chrome Long Pattern Combination Wrench 12 Point 25-264 2" Satin Chrome Long Pattern Combination Wrench 12 Point 



















Wrench Set 


25-681 781412256819 Boxed 12.06 lb 1 


29-468 Vinyl Roll 15 Pockets 25-474 3/4" Satin Chrome Long Pattern Combination Wrench 12 Point 








6 


675


















Wrench Set 


25-680 781412256802 Boxed 6.23 lb 1 







25-472 11/16" Satin Chrome Long Pattern Combination Wrench 12 Point 
















Wrench Set 


25-677 781412256772 Boxed 1.87 lb 1 






676
















18 Pc. 12 Point Metric Long Pattern Satin 



52-686 781412526868 Boxed 8.33 lb 1 


29-470 Vinyl Roll 18 Pockets 52-466 16mm Satin Chrome Long Pattern Combination Wrench 12 Point 

52-457 7mm Satin Chrome Long Pattern Combination Wrench 12 Point 52-467 17mm Satin Chrome Long Pattern Combination Wrench 12 Point 








52-465 15mm Satin Chrome Long Pattern Combination Wrench 12 Point 

6 


677















52-684 781412526844 Boxed 5.77 lb 1 
























52-682 781412526820 Boxed 13.36 lb 1 










678

















52-677 781412526776 Boxed 3.78 lb 1 







52-464 14mm Satin Chrome Long Pattern Combination Wrench 12 Point 













9 Pc. 12 Point Metric Long Pattern Satin Combination 

Wrench Set 


52-679 781412526790 Boxed 1.99 lb 1 







6 


679













15 Pc. 12 Point SAE Long Pattern Black Oxide 



30-644 781412306446 Boxed 10.39 lb 1 


29-468 Vinyl Roll 15 Pockets 30-224 3/4" Black Oxide Long Pattern Combination Wrench 12 Point 

30-210 5/16" Black Oxide Long Pattern Combination Wrench 12 Point 30-226 13/16" Black Oxide Long Pattern Combination Wrench 12 Point 



30-216 1/2" Black Oxide Long Pattern Combination Wrench 12 Point 30-232 1" Black Oxide Long Pattern Combination Wrench 12 Point 

30-218 9/16" Black Oxide Long Pattern Combination Wrench 12 Point 30-234 1-1/16" Black Oxide Long Pattern Combination Wrench 12 Point 


















30-636 781412306361 Boxed 6.17 lb 1 






30-220 5/8" Black Oxide Long Pattern Combination Wrench 12 Point 30-232 1" Black Oxide Long Pattern Combination Wrench 12 Point 

30-222 11/16" Black Oxide Long Pattern Combination Wrench 12 Point 

680


















30-631 781412306316 Boxed 1.87 lb 1 


















15 Pc. 12 Point Metric Long Pattern Black Oxide 



56-628 781412566284 Boxed 7.98 lb 1 


29-468 Vinyl Roll 15 Pockets 56-217 17mm Black Oxide Long Pattern Combination Wrench 12 Point 

56-210 10mm Black Oxide Long Pattern Combination Wrench 12 Point 56-218 18mm Black Oxide Long Pattern Combination Wrench 12 Point 







6 


681











■■Large Size Stamp on Both Sides of the Wrench for Ease in 

Identification 




Wrench Set 


25-616 781412256161 Boxed 10.04 lb 1 


25-112 3/8" Full Polish Regular Combination Wrench 12 Point 25-128 7/8" Full Polish Regular Combination Wrench 12 Point 


25-116 1/2" Full Polish Regular Combination Wrench 12 Point 25-132 1" Full Polish Regular Combination Wrench 12 Point 

25-118 9/16" Full Polish Regular Combination Wrench 12 Point 25-234 1-1/16" Full Polish Long Pattern Combination Wrench 12 Point 



25-124 3/4" Full Polish Regular Combination Wrench 12 Point - Vinyl Roll 

















Wrench Set 


25-613 781412256130 Boxed 3.96 lb 1 







25-118 9/16" Full Polish Regular Combination Wrench 12 Point 25-132 1" Full Polish Regular Combination Wrench 12 Point 

25-120 5/8" Full Polish Regular Combination Wrench 12 Point 29-462 Vinyl Roll 13 Pockets 

682
















Wrench Set 


25-609 781412256093 Boxed 1.29 lb 1 



















7 Pc. 12 Point SAE Stubby Full Polish Combination 

Wrench Set 


25-605 781412256055 Boxed 1.47 lb 1 


25-162 3/8" Full Polish Stubby Combination Wrench 12 Point 25-170 5/8" Full Polish Stubby Combination Wrench 12 Point 



25-168 9/16" Full Polish Stubby Combination Wrench 12 Point 29-430 Vinyl Roll 7 Pockets 

6 


683



■■Midget Combination Wrenches Are Designed for Precision 

Applications 



Durability 


10 Pc. 12 Point SAE Midget Full Polish Combination 

Wrench Set 


25-600 781412256000 Boxed 0.24 lb 1 


- 5/32" 6 Point Midget Wrench - 9/32" 12 Point Midget Wrench 




- 15/16" 12 Point Midget Wrench - Vinyl Pouch 

- 1/4" 12 Point Midget Wrench 















8 Pc. 6 and 12 Point SAE Full Polish Combination 

Wrench Set 


25-602 781412256024 Boxed 0.38 lb 1 







684















Wrench Set 


52-619 781412526196 Boxed 2.10 lb 1 


29-466 Vinyl Roll 14 Pockets 52-116 16mm Full Polish Regular Combination Wrench 12 Point 

52-109 9mm Full Polish Regular Combination Wrench 12 Point 52-117 17mm Full Polish Regular Combination Wrench 12 Point 



















Luster 


10 Pc. 12 Point Metric Stubby Full Polish Combination 

Wrench Set 


52-605 781412526059 Boxed 1.50 lb 1 

6 



29-450 Vinyl Roll 10 Pockets 52-165 15mm Full Polish Stubby Combination Wrench 12 Point 

52-160 10mm Full Polish Stubby Combination Wrench 12 Point 52-166 16mm Full Polish Stubby Combination Wrench 12 Point 





685















Wrench Set 


52-601 781412526011 Boxed 0.20 lb 1 


29-434 Vinyl Roll 7 Pockets 52-083 5.5mm Full Polish Regular Combination Wrench 6 Point 






■■Midget Combination Wrenches Are Designed for Precision 

Applications 



Durability 

10 Pc. 6 and 12 Point Metric Midget Full Polish 



52-600 781412526004 Boxed 0.26 lb 1 


- 4mm 6 Point Midget Wrench - 8mm 12 Point Midget Wrench 

- 4.5mm 6 Point Midget Wrench - 9mm 12 Point Midget Wrench 

- 5mm 6 Point Midget Wrench - 10mm 12 Point Midget Wrench 

- 5.5mm 12 Point Midget Wrench - 11mm 12 Point Midget Wrench 

- 6mm 12 Point Midget Wrench - Vinyl Pouch 

- 7mm 12 Point Midget Wrench 

686















14 Pc. 12 Point SAE Standard Pattern Satin 



25-607 781412256079 Boxed 10.46 lb 1 


30-312 3/8" Satin Chrome Regular Combination Wrench 12 Point 30-328 7/8" Satin Chrome Regular Combination Wrench 12 Point 


30-316 1/2" Satin Chrome Regular Combination Wrench 12 Point 30-332 1" Satin Chrome Regular Combination Wrench 12 Point 

30-318 9/16" Satin Chrome Regular Combination Wrench 12 Point 25-484 1-1/16" Satin Chrome Long Pattern Combination Wrench 12 Point 



30-324 3/4" Satin Chrome Regular Combination Wrench 12 Point - Vinyl Roll 

30-326 13/16" Satin Chrome Regular Combination Wrench 12 Point 

















25-608 781412256086 Boxed 5.63 lb 1 

6 



25-458 1/4" Satin Chrome Long Pattern Combination Wrench 12 Point 30-322 11/16" Satin Chrome Regular Combination Wrench 12 Point 





30-320 5/8" Satin Chrome Regular Combination Wrench 12 Point 30-332 1" Satin Chrome Regular Combination Wrench 12 Point 

687


















25-611 781412256116 Boxed 2.26 lb 1 






30-316 1/2" Satin Chrome Regular Combination Wrench 12 Point - Vinyl Roll 













■■Satin Chrome Finish Provides Smooth Edges with a Bright 

Appearance 


15 Pc. 12 Point Metric Standard Pattern Satin 



52-602 781412526028 Boxed 5.50 lb 1 


56-407 7mm Satin Chrome Regular Combination Wrench 12 Point 56-415 15mm Satin Chrome Regular Combination Wrench 12 Point 







56-414 14mm Satin Chrome Regular Combination Wrench 12 Point - Vinyl Roll 

688














11 Pc. 12 Point Metric Standard Pattern Satin 



52-606 781412526066 Boxed 3.50 lb 1 







56-412 12mm Satin Chrome Regular Combination Wrench 12 Point - Vinyl Roll 














14 Pc. 12 Point SAE Standard Pattern Black Oxide 



30-607 781412306071 Boxed 10.47 lb 1 


30-112 3/8" Black Oxide Regular Combination Wrench 12 Point 30-128 7/8" Black Oxide Regular Combination Wrench 12 Point 


30-116 1/2" Black Oxide Regular Combination Wrench 12 Point 30-132 1" Black Oxide Regular Combination Wrench 12 Point 

30-118 9/16" Black Oxide Regular Combination Wrench 12 Point 30-234 1-1/16" Black Oxide Long Pattern Combination Wrench 12 Point 



30-124 3/4" Black Oxide Regular Combination Wrench 12 Point - Vinyl Roll 

30-126 13/16" Black Oxide Regular Combination Wrench 12 Point 

6 


689















11 Pc. 12 Point SAE Standard Pattern Black Oxide 



30-608 781412306088 Boxed 5.64 lb 1 






30-120 5/8" Black Oxide Regular Combination Wrench 12 Point 30-132 1" Black Oxide Regular Combination Wrench 12 Point 

30-122 11/16" Black Oxide Regular Combination Wrench 12 Point - Vinyl Roll 














11 Pc. 12 Point Metric Standard Pattern Black Oxide 



56-611 781412566116 Boxed 2.60 lb 1 


56-307 7mm Black Oxide Regular Combination Wrench 12 Point 56-313 13mm Black Oxide Regular Combination Wrench 12 Point 





56-312 12mm Black Oxide Regular Combination Wrench 12 Point - Vinyl Roll 

690















12 Point SAE Extra Long Full Polish 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 












6 


691














GGG-W-636E 





Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

25-208* 781412252088 Bagged 1/4 in 0.550 in 0.140 in 0.390 in 0.190 in 5.000 in 0.06 lb 1 













25-232* 781412252323 Bagged 1 in 2.050 in 0.410 in 1.450 in 0.620 in 14.000 in 1.10 lb 1 





692


















Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 














6 


693














12 Point Metric Extra Long Full Polish 




Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 













694

















Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 



























6 


695


















Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 




























12 Point SAE Long Pattern Satin 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 




696



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 


































Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


697














12 Point Metric Long Pattern Satin 




Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 



































698















12 Point SAE Long Pattern Black Oxide 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 



































6 


699



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 
















12 Point Metric Long Pattern Black Oxide 




Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 




















700















12 Point SAE Standard Pattern Full Polish 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 
















6 


701


12 Point SAE Stubby Full Polish 
















Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 






















6 Point SAE Standard Pattern Full Polish 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 











702



Fastener 

Size 

End A Width 

End A 

Thickness 

End B Width 

End B 

Thickness 









Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 













12 Point Metric Standard Pattern Full Polish 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 





















6 


703














6 Point Metric Standard Pattern Full Polish 




Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 



52-083 781412520835 Bagged 5.5 mm 0.512 in 0.154 in 0.374 in 0.169 in 3.374 in 0.03 lb 1 





















704














12 Point Metric Stubby Full Polish 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 











6 


705















12 Point SAE Standard Pattern Satin 




Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 















706














12 Point Metric Standard Pattern Satin 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 





















6 


707















12 Point SAE Standard Pattern Black Oxide 




Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 














708














12 Point Metric Standard Pattern Black Oxide 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 





















6 


709

S P E C I A L T Y W R E N C H E S 

■■Quickly Ratchet Flare Nuts and Bolts Without Removing the 

Wrench From the Fastener 

■■Flex Head Provides Access to Difficult-To-Reach Hose Fittings 

and Gets Around Other Obstructions 

■■Flare Nut Wrench Head Easily Slips Over Lines 

■■Flex Flare Nut Wrench Design Exceeds ANSI Requirements for 


5 Pc. SAE Ratcheting Flex Flare Nut Wrench Set 

Cat. No. Packaging Product Weight Shelf Pack Qty. 

89100 Blow Mold Tray 2.55 lb 1 


89109 Ratcheting Flex Flare Nut Wrench 1/4" x 5/16" 89112 Ratcheting Flex Flare Nut Wrench 5/8" x 11/16" 

89110 Ratcheting Flex Flare Nut Wrench 3/8" x 7/16" 89113 Ratcheting Flex Flare Nut Wrench 3/4" x 7/8" 

89111 Ratcheting Flex Flare Nut Wrench 1/2" x 9/16" 








6 Pc. Metric Ratcheting Flex Flare Nut Wrench Set 


Cat. No. Packaging Product Weight Shelf Pack Qty. 

89101D Blow Mold Tray 2.93 lb 1 


89102 Ratcheting Flex Flare Nut Wrench 9x11mm 89105 Ratcheting Flex Flare Nut Wrench 15x17mm 










SAE Ratcheting Flex Flare Nut Wrenches 

Cat. No. 

Packaging 

End A 

Fastener Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

End A Slot 

Width 

89109 Carded 1/4 in 0.614 in 0.256 in 5/16 in 0.709 in 0.256 in 0.124 in 6.444 in 0.23 lb 1 





Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

710









Cat. No. 

Packaging 


Size 

End A 

Width 

Metric Ratcheting Flex Flare Nut Wrenches 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

End A Slot 

Width 

89102 Carded 9 mm 0.811 in 0.374 in 11 mm 0.906 in 0.394 in 0.199 in 7.769 in 0.36 lb 1 






Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

■■Size Stamped on Both Sides 

■■Flex Head Wrench Ends for Increased Access 

■■Full Polish Chrome 

5 Pc. SAE Flex Flare Nut Wrench Set 


81910 099575819100 Carded 2.78 lb 1 

6 


81693 Flex Flare Nut Wrench 1/4" x 5/16" 81696 Flex Flare Nut Wrench 5/8" x 11/16" 


81695 Flex Flare Nut Wrench 1/2" x 9/16" 




3 Pc. SAE Flex Flare Nut Wrench Set 



81914 099575819148 Carded 1.28 lb 1 



81695 Flex Flare Nut Wrench 1/2" x 9/16" 

711





6 Pc. Metric Flex Flare Nut Wrench Set 


81911D 099575819117 Carded 3.47 lb 1 


81686 Flex Flare Nut Wrench 9x11mm 81689 Flex Flare Nut Wrench 15x17mm 






3 Pc. Metric Flex Flare Nut Wrench Set 



81915 099575819155 Carded 0.97 lb 1 



81687 Flex Flare Nut Wrench 10x12mm 

■■Size Stamped on Both Sides and Head 

■■Flex Heads for Increased Access 



SAE Flex Flare Nut Wrenches 

End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 






Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

712



■■Flex Heads for Increased Access 


Metric Flex Flare Nut Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 







Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


■■15° Offset Wrench Ends 


6 Pc. SAE Flare Nut Wrench Set 



6 


81680 1/4" x 5/16" Flare Nut Wrench 81683 5/8" x 11/16" Flare Nut Wrench 




■■15° Offset Wrench Ends 


6 Pc. Metric Flare Nut Wrench Set 





81644 9x11mm Flare Nut Wrench 81647 15x17mm Flare Nut Wrench 



713



■■15° Offset Heads 


SAE Flare Nut Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 







Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


■■15° Offset Heads 


Metric Flare Nut Wrenches 



End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 












Overall 

Length 

Product 

Weight 

11 Pc. 3/8" Drive SAE Ratcheting Crowfoot 

Wrench Set 


89118 099575891182 Boxed 2.20 lb 1 

Shelf Pack 

Qty. 






89124 3/8" Drive Ratcheting Crowfoot Wrench 5/8" 89130 3/8" Drive Ratcheting Crowfoot Wrench 1" 

89125 3/8" Drive Ratcheting Crowfoot Wrench 11/16" 

714







10 Pc. 3/8" Drive Metric Ratcheting Crowfoot 

Wrench Set 


89119 099575891199 Boxed 1.30 lb 1 












3/8" Drive SAE Ratcheting Crowfoot Wrenches 

6 












89130 099575891304 Carded 1 in 2.087 in 0.476 in 2.441 in 0.32 lb 1 


715







3/8" Drive Metric Ratcheting Crowfoot Wrenches 























81607 3/8" Drive Crowfoot Wrench 5/8" 81613 3/8" Drive Crowfoot Wrench 1" 

81608 3/8" Drive Crowfoot Wrench 11/16" 

716















6 


End A 












Product 

Weight 

Shelf Pack 

Qty. 


717





End A 












81613 099575816130 Carded 1 in 2.203 in 0.393 in 1.337 in 2.518 in 0.29 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 


■■40° Deep Offset for Fastener Access 





5 Pc. SAE 40° Deep Offset Box Wrench Set 


81926 099575819261 Carded 3.05 lb 1 


81787 3/8 x 7/16 40° Deep Offset Box Wrench 81790 13/16" x 7/8" 40° Deep Offset Box Wrench 

81788 1/2" x 9/16" 40° Deep Offset Box Wrench 81791 15/16" x 1" 40° Deep Offset Box Wrench 

81789 11/16" x 3/4" 40° Deep Offset Box Wrench 

718







5 Pc. Metric 40° Deep Offset Box Wrench Set 


81927 099575819278 Boxed 3.52 lb 1 


81782 8x10mm 40° Deep Offset Box Wrench 81785 12x14mm 40° Deep Offset Box Wrench 

81783 10x12mm 40° Deep Offset Box Wrench 81786 17x19mm 40° Deep Offset Box Wrench 

81784 11x13mm 40° Deep Offset Box Wrench 






12 Point SAE 40° Deep Offset Box Wrenches 


End A 

Fastener Size 

End A Width 

End B 

Fastener Size End B Width Overall Length 

81787 099575817878 Carded 3/8 in 0.640 in 7/16 in 0.724 in 7.677 in 0.19 lb 1 




81791 099575817915 Carded 15/16 in 1.343 in 1 in 1.467 in 14.173 in 0.50 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

6 







12 Point Metric 40° Deep Offset Box Wrenches 

End A 

Fastener Size 

End A Width 

End B 

Fastener Size End B Width Overall Length 

81782 099575817823 Carded 8 mm 0.561 in 10 mm 0.640 in 7.283 in 0.19 lb 1 





Product 

Weight 

Shelf Pack 

Qty. 


719




7 Pc. SAE Full Polish Open End Wrench Set 




81798 1/4" x 5/16" Full Polish Open End Wrench 81803 13/16" x 3/4" Full Polish Open End Wrench 

81799 3/8" x 7/16" Full Polish Open End Wrench 81804 15/16" x 1" Full Polish Open End Wrench 

81801 1/2" x 9/16" Full Polish Open End Wrench 81805 1-1/8" x 1-1/4" Full Polish Open End Wrench 

81802 5/8" x 11/16" Full Polish Open End Wrench 



6 Pc. Metric Full Polish Open End Wrench Set 





81792 6x7mm Full Polish Open End Wrench 81795 11x13mm Full Polish Open End Wrench 

81793 8x10mm Full Polish Open End Wrench 81796 12x14mm Full Polish Open End Wrench 

81794D 10x12mm Full Polish Open End Wrench 81797 17x19mm Full Polish Open End Wrench 

720




SAE Full Polish Open End Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 






81804 099575818042 Carded 15/16 in 1.974 in 0.366 in 1 in 2.057 in 0.382 in 11.008 in 0.44 lb 1 

81805 099575818059 Carded 1-1/8 in 2.468 in 0.445 in 1-1/4 in 2.632 in 0.461 in 12.205 in 0.70 lb 1 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 



Metric Full Polish Open End Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 







Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

6 


721


11 Pc. 12 Point SAE Flex Head Wrench Set 


■■A 12-Point Socket End Pivots 180° to Give You Easy Access to 

Hard-To-Reach Fasteners. 








Luster 


25-696 781412256963 Boxed 5.15 lb 1 


25-508 1/4" Full Polish Flex Combination Wrench 12 Point 25-520 5/8" Full Polish Flex Combination Wrench 12 Point 





25-518 9/16" Full Polish Flex Combination Wrench 12 Point 29-458 Vinyl Roll 11 Pockets 













Luster 


25-694 781412256949 Boxed 3.48 lb 1 






722













Luster 


25-692 781412256925 Boxed 1.59 lb 1 















Luster 


12 Point SAE Full Polish Flex Head Wrenches 

End A 













Product 

Weight 

Shelf Pack 

Qty. 

6 


723







■■Two Different Size Openings on Opposite Ends Provides Broader 

Coverage than a Combination Wrench, Less Wrenches to Carry 

■■Box Ends Are Offset 15° for Clearing Obstructions and Knuckle 

Clearance on Flat Surfaces 



Durability 






GGG-W-636e 

7 Pc. 12 Point SAE 15° Offset Box Wrench Set 


26-852 781412268522 Boxed 4.55 lb 1 


26-658 12 Point Full Polish 15° Offset Box Wrench 7/16 x 1/2" 26-751 12 Point Full Polish 15° Offset Box Wrench 15/16 x 1" 

26-679 12 Point Full Polish 15° Offset Box Wrench 9/16 x 5/8" 26-766 12 Point Full Polish 15° Offset Box Wrench 1-1/16 x 1-1/8" 

26-706 12 Point Full Polish 15° Offset Box Wrench 11/16 x 3/4" 26-643* 12 Point Full Polish 15° Offset Box Wrench 3/8 x 7/16" 

26-733 12 Point Full Polish 15° Offset Box Wrench 13/16 x 7/8" 29-428 Vinyl Roll 7 Pockets 

* Meets or Exceeds Aerospace Standard AS954E-2004 













Durability 


GGG-W-636e 

5 Pc. 12 Point SAE 15° Offset Box Wrench Set 


26-849 781412268492 Boxed 1.99 lb 1 


26-658 12 Point Full Polish 15° Offset Box Wrench 7/16 x 1/2" 26-733 12 Point Full Polish 15° Offset Box Wrench 13/16 x 7/8" 

26-679 12 Point Full Polish 15° Offset Box Wrench 9/16 x 5/8" 26-643* 12 Point Full Polish 15° Offset Box Wrench 3/8 x 7/16" 

26-706 12 Point Full Polish 15° Offset Box Wrench 11/16 x 3/4" 29-421 Vinyl Roll 5 Pockets 


724













Durability 

■■Meets or Exceeds ASME B107.9m 

11 Pc. 12 Point Metric 15° Offset Box Wrench Set 


53-845 781412538458 Boxed 6.00 lb 1 


29-458 Vinyl Roll 11 Pockets 53-685 12 Point Full Polish 15° Offset Box Wrench 16 x 18mm 

53-616 12 Point Full Polish 15° Offset Box Wrench 6 x 7mm 53-691 12 Point Full Polish 15° Offset Box Wrench 17 x 19mm 
















Durability 


7 Pc. 12 Point Metric 15° Offset Box Wrench Set 


53-843 781412538434 Boxed 2.11 lb 1 






6 


725









■■Box Ends Are Offset 45° for Clearing Large Obstructions, 

Reaching Recessed Fasteners, and Knuckle Clearance on Flat 

Surfaces 



Durability 

■■Meets or Exceeds ASME B107.6 and US Federal Spec. GGG-W- 

636e 

6 Pc. 12 Point SAE 45° Deep Offset Box Wrench Set 


27-570 781412275704 Boxed 3.20 lb 1 


27-343 12 Point Full Polish 45° Offset Long Box Wrench 3/8 x 7/16" 27-451 12 Point Full Polish 45° Offset Long Box Wrench 15/16 x 1" 

27-367 12 Point Full Polish 45° Offset Long Box Wrench 1/2 x 9/16" 27-466 12 Point Full Polish 45° Offset Long Box Wrench 1-1/16 x 1-1/8" 

27-394 12 Point Full Polish 45° Offset Long Box Wrench 5/8 x 11/16" 29-424 Vinyl Roll 6 Pockets 

27-424 12 Point Full Polish 45° Offset Long Box Wrench 3/4 x 7/8" 











Surfaces 



Durability 


9 Pc. 12 Point Metric 45° Deep Offset Box Wrench Set 


54-573 781412545739 Boxed 5.25 lb 1 







726













Durability 



12 Point SAE 15° Full Polish Offset Box Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

26-631* 781412266313 Bagged 1/4 in 0.368 in 0.220 in 5/16 in 0.461 in 0.245 in 7.240 in 0.11 lb 1 


26-658 781412266580 Bagged 7/16 in 0.656 in 0.312 in 1/2 in 0.734 in 0.328 in 8.453 in 0.15 lb 1 







26-751 781412267518 Bagged 15/16 in 1.312 in 0.515 in 1 in 1.437 in 0.531 in 15.375 in 0.75 lb 1 

26-754 781412267549 Bagged 15/16 in 1.375 in 0.562 in 1-1/16 in 1.531 in 0.594 in 15.500 in 0.97 lb 1 

26-763 781412267631 Bagged 1 in 1.500 in 0.656 in 1-1/8 in 1.562 in 0.703 in 16.625 in 1.30 lb 1 

26-766 781412267662 Bagged 1-1/16 in 1.500 in 0.656 in 1-1/8 in 1.562 in 0.703 in 17.000 in 1.22 lb 1 







6 


727













Durability 


GGG-W-636E 

12 Point SAE 15° Full Polish Offset Short 

Box Wrenches 



Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

26-543D 781412265439 Bagged 3/8 in 0.560 in 0.281 in 7/16 in 0.656 in 0.281 in 4.750 in 0.05 lb 1 
















Durability 


12 Point Metric 15° Full Polish Offset Box Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

53-616 781412536164 Bagged 6 mm 0.437 in 0.252 in 7 mm 0.531 in 0.252 in 7.063 in 0.14 lb 1 














728











Surfaces 



Durability 


GGG-W-636E 

12 Point SAE 45° Full Polish Offset Short Box Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 














Surfaces 



Durability 



12 Point SAE 45° Full Polish Deep Offset 

Box Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 















6 


729











Surfaces 



Durability 


12 Point Metric 45° Full Polish Deep Offset 

Box Wrenches 



End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


















■■Half Moon Shape for Accessing Fasteners Around Obstructions 



Durability 

12 Point SAE Satin Finish Half Moon Double 

Box Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 



730



6 or 12 Point SAE Laminated 25° Offset Double Box 



Drive 

Type 

End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

27-613 781412276138 Bagged 6 Point 1/4 in 0.593 in 0.312 in 5/16 in 0.656 in 0.312 in 4.093 in 0.14 lb 1 










Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 


6 or 12 Point Metric Laminated 25° Offset Double Box 


6 


Drive 

Type 

End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

54-637 781412546378 Bagged 6 Point 7 mm 0.594 in 0.311 in 8 mm 0.657 in 0.311 in 4.094 in 0.14 lb 1 







Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 


731



12 Point SAE Double Box Laminated Ratcheting 

Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

27-588 781412275889 Bagged 1/4 in 0.593 in 0.312 in 5/16 in 0.656 in 0.312 in 4.380 in 0 in 0.13 lb 1 







27-603 781412276039 Bagged 1 in 1.906 in 0.375 in 1-1/16 in 2.500 in 0.375 in 15.250 in 0 in 1.40 lb 1 

27-604 781412276046 Bagged 1-1/8 in 1.906 in 0.375 in 1-1/4 in 2.500 in 0.375 in 15.000 in 0 in 1.26 lb 1 

Overall 

Length 

Overall 

Offset 

Height 

Product 

Weight 

Shelf 

Pack Qty. 




6 or 12 Point Metric Double Box Laminated Ratcheting 

Wrenches 

Drive 

Type 

End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 








Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

732



Double Box HVAC Laminated Ratcheting Wrenches 

Cat. No. 

UPC No. 

End A 

Drive 

Type 

End B 

Drive 

Type 

End A 

Fastener Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

27-663 781412276633 Square 6 Point 1/4 & 3/16 in 1.000 in 0.375 in 9/16 & 1/2 in 1.125 in 0.375 in 6.750 in 0 in 0.50 lb 

27-664 781412276640 Square Square 3/8 & 5/16 in 0.593 in 0.312 in 1/4 & 3/16 in 0.656 in 0.312 in 5.500 in 0 in 0.25 lb 

27-665 781412276657 Square Square 3/8 & 5/16 in 0.593 in 0.312 in 1/4 & 3/16 in 0.656 in 0.312 in 5.500 in 1.250 in 0.25 lb 

Overall 

Length 

Overall 

Offset 

Height 

Product 

Weight 




■■Open Ends Are Offset 15° for Turning a Fastener in a 30° Arc 



Durability 


GGG-W-636E 



26-282 781412262827 Boxed 8.01 lb 1 


26-043 Full Polish Open End Wrench 3/8 x 7/16" 26-169 Full Polish Open End Wrench 1-1/16 x 1-1/4" 

26-067 Full Polish Open End Wrench 1/2 x 9/16" 26-022D Full Polish Open End Wrench 1/4 x 5/16" 

26-094 Full Polish Open End Wrench 5/8 x 11/16" 26-187D Full Polish Open End Wrench 1-5/16 x 1-1/2" 

26-121 Full Polish Open End Wrench 3/4 x 13/16" 26-190D Full Polish Open End Wrench 1-3/8 x 1-7/16" 

26-139 Full Polish Open End Wrench 7/8 x 15/16" 29-454 Vinyl Roll 10 Pockets 


6 


733








Durability 


GGG-W-636E 



26-273 781412262735 Boxed 2.38 lb 1 


26-043 Full Polish Open End Wrench 3/8 x 7/16" 26-121 Full Polish Open End Wrench 3/4 x 13/16" 

26-067 Full Polish Open End Wrench 1/2 x 9/16" 26-139 Full Polish Open End Wrench 7/8 x 15/16" 

26-094 Full Polish Open End Wrench 5/8 x 11/16" 29-420 Vinyl Roll 5 Pockets 








Durability 




53-273 781412532739 Boxed 4.60 lb 1 


29-452 Vinyl Roll 10 Pockets 53-082 Full Polish Open End Wrench 16 x 17mm 

53-016 Full Polish Open End Wrench 6 x 7mm 53-096 Full Polish Open End Wrench 18 x 19mm 





734








Durability 




53-270 781412532708 Boxed 1.74 lb 1 


29-422 Vinyl Roll 6 Pockets 53-067 Full Polish Open End Wrench 14 x 15mm 





■■Tappet Wrenches Were Originally Designed for Adjusting 

Tappets / Lifters in Older Internal Combustion Engines 

■■Tappet Style Wrenches Are Now Used in Any Application 

Requiring Thin Jaws Such As on Thin Jam Nuts 



Durability 

■■Meets or Exceeds US Federal Spec. GGG-W-636E 

8 Pc. SAE Extra Thin Tappet Wrench Set 

6 


27-770 781412277708 Boxed 2.96 lb 1 


27-643 Double End Tappet Wrench 3/8 x 7/16" 27-724 Double End Tappet Wrench 3/4 x 7/8" 

27-667 Double End Tappet Wrench 1/2 x 9/16" 29-440 Vinyl Roll 8 Pockets 

27-694 Double End Tappet Wrench 5/8 x 11/16" 


735









Durability 


4 Pc. SAE Extra Thin Tappet Wrench Set 


27-768 781412277685 Boxed 1.06 lb 1 


27-658 Double End Tappet Wrench 7/16 x 1/2" 27-679 Double End Tappet Wrench 9/16 x 5/8" 

27-667 Double End Tappet Wrench 1/2 x 9/16" 29-416 Vinyl Roll 4 Pockets 


14 Pc. SAE Full Polish 15 and 60° Angle Wrench Set 


■■With One Size Opening Per Wrench, One Head is Angled 15° and 

the Other is Angled 60° Providing 4 Different Turning Angles for 

Greater Access in Tight Work Areas 

■■Open Ends Have a Radius Design for Greater Strength; 

Especially When Compared to a Hex Open End 


Luster 



Durability 


GGG-W-636E 


27-895 781412278958 Boxed 8.27 lb 1 


27-812 3/8" Open End Full Polish 15 and 60° Full Polish Angle Wrench 27-828 7/8" Open End Full Polish 15 and 60° Full Polish Angle Wrench 


27-816 1/2" Open End Full Polish 15 and 60° Full Polish Angle Wrench 27-832 1" Open End Full Polish 15 and 60° Full Polish Angle Wrench 

27-818 9/16" Open End Full Polish 15 and 60° Full Polish Angle Wrench 27-834 1-1/16" Open End Full Polish 15 and 60° Full Polish Angle Wrench 



27-824 3/4" Open End Full Polish 15 and 60° Full Polish Angle Wrench 29-464 Vinyl Roll 14 Pockets 

27-826 13/16" Open End Full Polish 15 and 60° Full Polish Angle Wrench 

736


7 Pc. SAE 15 and 60° Full Polish Angle Wrench Set 








Luster 



Durability 


GGG-W-636E 


27-885 781412278859 Boxed 1.66 lb 1 





27-818 9/16" Open End Full Polish 15 and 60° Full Polish Angle Wrench 29-436 Vinyl Roll 7 Pockets 








Luster 



Durability 


GGG-W-636E 

9 Pc. SAE 15 and 80° Full Polish Miniature Angle 

Wrench Set 


27-937 781412279375 Boxed 0.54 lb 1 


27-904 15/64" Open End Full Polish 15 and 80° Miniature Angle Wrench 27-911 11/32" Open End Full Polish 15 and 80° Miniature Angle Wrench 




27-910 5/16" Open End Full Polish 15 and 80° Miniature Angle Wrench 29-446 Vinyl Roll 9 Pockets 

6 


737









Luster 



Durability 

13 Pc. SAE 15 and 80° Full Polish Ignition Wrench Set 


27-945 781412279450 Boxed 0.89 lb 1 




27-907 7/32" Open End Full Polish 15 and 80° Miniature Angle Wrench 66-202 Acetate Slotted Screwdriver 1/8 x 3" 

27-908 1/4" Open End Full Polish 15 and 80° Miniature Angle Wrench 66-924 5" Screw Starter, Slotted Screws 

27-909 9/32" Open End Full Polish 15 and 80° Miniature Angle Wrench 67-830 5-1/4" Midget Angle Nose Ignition Pliers 

27-910 5/16" Open End Full Polish 15 and 80° Miniature Angle Wrench - Ignition File 

27-911 11/32" Open End Full Polish 15 and 80° Miniature Angle Wrench - #1 Phillips Bit 









Luster 



Durability 

9 Pc. SAE 15 and 80° Full Polish Ignition Wrench Set 


27-942 781412279429 Boxed 0.64 lb 1 






27-909 9/32" Open End Full Polish 15 and 80° Miniature Angle Wrench 67-830 5-1/4" Midget Angle Nose Ignition Pliers 

738









Luster 



Durability 

14 Pc. SAE 15 and 80° Full Polish Miniature Angle 

Wrench Set 


27-943 781412279436 Boxed 1.00 lb 1 








27-910 5/16" Open End Full Polish 15 and 80° Miniature Angle Wrench 67-717* 5" Tongue and Groove Pliers 

27-911 11/32" Open End Full Polish 15 and 80° Miniature Angle Wrench 

* Meets or Exceeds ASME B107.23m 

6 








Luster 



Durability 


7 Pc. Metric 15 and 80° Full Polish Miniature Angle 

Wrench Set 


54-941 781412549416 Boxed 0.42 lb 1 



29-434 Vinyl Roll 7 Pockets 54-908 8mm Open End Full Polish 15 and 80° Miniature Angle Wrench 

54-902 5.5mm Open End Full Polish 15 and 80° Miniature Angle Wrench 54-909 9mm Open End Full Polish 15 and 80° Miniature Angle Wrench 

54-906 6mm Open End Full Polish 15 and 80° Miniature Angle Wrench 54-910 10mm Open End Full Polish 15 and 80° Miniature Angle Wrench 

54-907 7mm Open End Full Polish 15 and 80° Miniature Angle Wrench 54-911 11mm Open End Full Polish 15 and 80° Miniature Angle Wrench 

739


5 Pc. SAE Full Polish Flare Nut Wrench Set 


■■Flare Nut Wrenches Are Used to Grip Fittings in a Closed System 

Such As Hydraulic Lines, Fuel Lines, or Air Line Applications 




Luster 



Durability 


GGG-W-636E 


28-155 781412281552 Boxed 2.80 lb 1 


28-145 Full Polish Double Head Flare Nut Wrench 3/4 x 1" 28-135* Full Polish Double Head Flare Nut Wrench 1/2 x 9/16" 

28-150 Full Polish Double Head Flare Nut Wrench 7/8 x 1-1/8" 28-140* Full Polish Double Head Flare Nut Wrench 5/8 x 11/16" 

28-130* Full Polish Double Head Flare Nut Wrench 3/8 x 7/16" 29-420 Vinyl Roll 5 Pockets 

* Wrench has 6-point opening in both ends. 


3 Pc. SAE Full Polish Flare Nut Wrench Set 







Luster 



Durability 


GGG-W-636E 


28-153 781412281538 Boxed 1.07 lb 1 


28-130* Full Polish Double Head Flare Nut Wrench 3/8 x 7/16" 28-140* Full Polish Double Head Flare Nut Wrench 5/8 x 11/16" 

28-135* Full Polish Double Head Flare Nut Wrench 1/2 x 9/16" 29-472 Vinyl Roll 3 Pockets 


740


7 Pc. Full Polish Combination Flare Nut Wrench Set 




■■One Size Opening Per Wrench, Incorporates a Standard Open 

End on One End with a Flare Nut Opening on the Opposite End 

for Greater Versatility 


Luster 



Durability 


GGG-W-636E 


28-250D 781412282504 Boxed 2.28 lb 1 


28-212 Full Polish Combination Flare Nut Wrench 3/8" 28-220 Full Polish Combination Flare Nut Wrench 5/8" 



28-218 Full Polish Combination Flare Nut Wrench 9/16" 29-436 Vinyl Roll 7 Pockets 







Durability 


GGG-W-636E 

SAE Full Polish Open End Wrenches 



Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


















* Satin Finish 

6 


741




Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener Size 

End B 

Width 

End B 

Thickness 

26-145 781412261455 Bagged 7/8 in 1.906 in 0.421 in 1-1/16 in 2.281 in 0.421 in 12.000 in 0.97 lb 1 

26-151D 781412261516 Bagged 15/16 in 1.968 in 0.406 in 1 in 2.031 in 0.406 in 12.000 in 0.70 lb 1 

26-163 781412261639 Bagged 1 in 2.188 in 0.438 in 1-1/8 in 2.405 in 0.438 in 13.000 in 1.23 lb 1 

26-166D 781412261660 Bagged 1-1/16 in 2.187 in 0.421 in 1-1/8 in 2.375 in 0.421 in 13.000 in 1.00 lb 1 






26-199* 781412261998 Bagged 1-7/16 in 2.875 in 0.593 in 1-5/8 in 3.187 in 0.593 in 18.250 in 3.30 lb 1 

26-202* 781412262025 Bagged 1-1/2 in 2.875 in 0.593 in 1-5/8 in 3.187 in 0.593 in 18.250 in 2.61 lb 1 


Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 







Durability 


Metric Full Polish Open End Wrenches 



End A 

Fastener Size 

End A 

Width 

End A 

Thickness 


Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

53-009 781412530094 Bagged 5 mm 0.453 in 0.156 in 5.5 mm 0.531 in 0.156 in 3.875 in 0.04 lb 1 
























742








Durability 


GGG-W-636E 

SAE Black Oxide Open End Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 















6 

SAE Tappet Wrenches 








Durability 



End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 









743









Luster 



Durability 


GGG-W-636E 

SAE 15 and 60° Full Polish Angle Wrenches 



Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 















27-844* 781412278446 Bagged 1-3/8 in 2.625 in 0.406 in 2.625 in 0.406 in 12.500 in 1.27 lb 1 








27-864* 781412278644 Bagged 2 in 3.922 in 0.563 in 3.922 in 0.563 in 19.250 in 5.92 lb 1 


744









Luster 



Durability 


GGG-W-636E 

SAE 15 and 80° Miniature Angle Wrenches 


Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 














6 








Luster 



Durability 


Metric 15 and 80° Miniature Angle Wrenches 


Fastener 


End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

54-902 781412549027 Bagged 5.5 mm 0.520 in 0.114 in 0.520 in 0.114 in 3.252 in 0.02 lb 1 








745








Luster 



Durability 


GGG-W-636E 

SAE Full Polish Flare Nut Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

End A 

Slot 

Width 

Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

28-130* 781412281309 Bagged 3/8 in 0.825 in 0.340 in 7/16 in 0.735 in 0.300 in 0.320 in 6.000 in 0.14 lb 1 



28-145 781412281453 Bagged 3/4 in 1.594 in 0.625 in 1 in 1.250 in 0.469 in 0.817 in 9.130 in 0.52 lb 1 

28-150 781412281507 Bagged 7/8 in 1.750 in 0.672 in 1-1/8 in 1.438 in 0.516 in 0.875 in 9.750 in 0.75 lb 1 






■■One Size Opening Per Wrench, Incorporates a Standard Open 

End on One End with a Flare Nut Opening on the Opposite End 

for Greater Versatility 


Luster 



Durability 


GGG-W-636E 

SAE Full Polish Combination Flare Nut Wrenches 


Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Width 

End B 

Thickness 

Overall 

Length 

End B Slot 

Width 

Product 

Weight 

Shelf Pack 

Qty. 









746


SAE Satin Flare Nut Wrenches 







Appearance 



Durability 


GGG-W-636E 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

End A 

Slot 

Width 

Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

28-430 781412284300 Bagged 3/8 in 0.810 in 0.330 in 7/16 in 0.730 in 0.300 in 0.320 in 5.970 in 0.17 lb 1 










Appearance 



Durability 


GGG-W-636E 

Metric Satin Flare Nut Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

End B 

Fastener 

Size 

End B 

Width 

End B 

Thickness 

End A 

Slot 

Width 

Overall 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

55-215 781412552157 Bagged 9 mm 0.825 in 0.340 in 11 mm 0.735 in 0.300 in 0.320 in 6.000 in 0.12 lb 1 




6 


747



■■Designed for Use on 6 and 12 Point Tube Fittings, Fasteners, 

Valves and Compression Fittings. 

■■High Carbon Steel Jaws Snap Open, Then Close Around 

Fastener with 6 Point Contact. 

■■Unique Design Requires Only 30° Rotation for Ratcheting Action. 

■■Prevents Distortion of Thin-Walled Fittings. 

■■Allows Easy Access to Tight Locations. 

7 Pc. SAE Flare Nut Ratcheting Wrench Set with 

Wrench Roll 


28-386 781412283860 Boxed 2.20 lb 1 


28-224 Full Polish Combination Flare Nut Wrench 3/4" 28-318 9/16" Black Oxide Flare Nut Ratcheting Wrench 

28-312 3/8" Black Oxide Flare Nut Ratcheting Wrench 28-320 5/8" Black Oxide Flare Nut Ratcheting Wrench 

28-314 7/16" Black Oxide Flare Nut Ratcheting Wrench 28-322 11/16" Black Oxide Flare Nut Ratcheting Wrench 

28-316 1/2" Black Oxide Flare Nut Ratcheting Wrench 29-436 Vinyl Roll 7 Pockets 










10 Pc. Metric Flare Nut Ratcheting Wrench Set with 

Wrench Roll 


55-386 781412553864 Boxed 4.00 lb 1 


29-450 Vinyl Roll 10 Pockets 55-315 15mm Black Oxide Flare Nut Ratcheting Wrench 

55-310 10mm Black Oxide Flare Nut Ratcheting Wrench 55-316 16mm Black Oxide Flare Nut Ratcheting Wrench 





748


SAE Flare Nut Ratcheting Wrenches 









Cat. No. UPC No. Packaging End A Fastener Size End A Width End A Thickness Overall Length Product Weight Shelf Pack Qty. 

28-312 781412283129 Bagged 3/8 in 1.000 in 0.280 in 5.410 in 0.17 lb 1 










28-332 781412283327 Bagged 1 in 1.670 in 0.510 in 9.350 in 0.55 lb 1 

Metric Flare Nut Ratcheting Wrenches 










55-307 781412553079 Bagged 7 mm 1.000 in 0.280 in 5.409 in 0.17 lb 1 

















6 


749








Luster 



Durability 



44-370 781412443707 Boxed 1.60 lb 1 







38-855 3/8" Drive Crowfoot Wrench 15mm 16-835 17" Socket Rail Steel 

38-856 3/8" Drive Crowfoot Wrench 16mm 16-843 3/8" Drive Socket Clips Steel 









Luster 



Durability 


GGG-E-1507B 


15-405 781412154054 Boxed 1.26 lb 1 





11-853 3/8" Drive Crowfoot Wrench 9/16" 16-832 11" Socket Rail Steel 

11-854 3/8" Drive Crowfoot Wrench 5/8" 16-843 3/8" Drive Socket Clips Steel 


750










Luster 



Durability 


GGG-E-1507B 


15-415 781412154153 Boxed 1.40 lb 1 


11-842 3/8" Drive Flare Nut Crowfoot Wrench 5/8" 11-847 3/8" Drive Flare Nut Crowfoot Wrench 15/16" 

11-843 3/8" Drive Flare Nut Crowfoot Wrench 11/16" 11-848 3/8" Drive Flare Nut Crowfoot Wrench 1" 

11-844 3/8" Drive Flare Nut Crowfoot Wrench 3/4" 11-849 3/8" Drive Flare Nut Crowfoot Wrench 1-1/16" 

11-845 3/8" Drive Flare Nut Crowfoot Wrench 13/16" 16-832 11" Socket Rail Steel 

11-846 3/8" Drive Flare Nut Crowfoot Wrench 7/8" 16-843 3/8" Drive Socket Clips Steel 




■■Open End Crow Foot Wrenches Have a Thinner Head and Are 



Luster 



Durability 

■■Meets or Exceeds ASME B107.21 and US Federal Spec. GGG- 

W-1507b 



End A 


End B 

Thickness 

Product 

Weight 

Shelf Pack 

Qty. 












6 


751








Luster 



Durability 



End A 


End B 

Thickness 

Product 

Weight 

Shelf Pack 

Qty. 




















Luster 



Durability 

■■Meets or Exceeds ASME B107.21 and US Federal Specification 

GGG-C-1507b 



Fastener 


End A 


End B 


Product 

Weight 

Shelf Pack 

Qty. 









752










Luster 



Durability 


GGG-E-1507B 


15-600 781412156003 Boxed 4.80 lb 1 







12-845 1/2" Drive Flare Nut Crowfoot Wrench 1-7/16" 12-854 1/2" Drive Flare Nut Crowfoot Wrench 2" 

12-846 1/2" Drive Flare Nut Crowfoot Wrench 1-1/2" 16-835 17" Socket Rail Steel 

12-847 1/2" Drive Flare Nut Crowfoot Wrench 1-9/16" 16-845 1/2" Drive Socket Clips Steel 


6 








Luster 



Durability 


GGG-E-1507B 


15-595 781412155952 Boxed 3.92 lb 1 



12-859 1/2" Drive Crowfoot Wrench 15/16" 12-866 1/2" Drive Crowfoot Wrench 1-7/16" 

12-860 1/2" Drive Crowfoot Wrench 1" 12-867 1/2" Drive Crowfoot Wrench 1-1/2" 

12-861 1/2" Drive Crowfoot Wrench 1-1/16" 16-835 17" Socket Rail Steel 

12-862 1/2" Drive Crowfoot Wrench 1-1/8" 16-845 1/2" Drive Socket Clips Steel 


753










Luster 



Durability 


GGG-W-641 E 



Fastener 


End A 


End B 


Product 

Weight 

Shelf Pack 

Qty. 






















Luster 



Durability 


GGG-W-641 E 



End A 


End B 

Thickness 

Product 

Weight 

Shelf Pack 

Qty. 








754



■■A Thin Head Angled 30° and a Short Handle Allow Wrenches to 

Fit Into Areas with Limited Clearance. 



Durability 


SAE Thin Pattern Service / Pump Wrenches 



Size End A Width End A Thickness Overall Length Product Weight Shelf Pack Qty. 





28-034 781412280340 Bagged 1-1/16 in 1.875 in 0.250 in 7.062 in 0.26 lb 1 













28-068D 781412280685 Bagged 2-1/8 in 3.500 in 0.312 in 8.625 in 0.88 lb 1 




6 


755



■■Offset Handle Design to Clear Obstructions 

■■Hardened Tapered Handle Aligns Bolt Holes of Mating Plates 

■■Continuous Taper of Handle Makes Lining-Up Bolt Holes Easy 

and Works on a Range of Bolt And/or Hole Sizes Without 

Binding. 

■■Extra Heavy Duty Head Area Gives Maximum Strength and 

Durability. 

■■Meets or Exceeds US Federal Spec. GGG-W-636e 

SAE Open End Black Oxide Structural Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

Tang 

Diameter Min 

Overall 

Length 

Tang Diameter 

Max 

Tang 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


















■■Offset Handle Design to Clear Obstructions 




Binding. 

■■Extra Heavy Duty Head Area and Box End Design Are Designed 

to Turn Stubborn Fasteners Providing Maximum Strength and 

Safety. 


12 Point SAE Box End Black Oxide 

Structural Wrenches 


End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

Tang 

Diameter Min 

Overall 

Length 

Tang Diameter 

Max 

Tang 

Length 

Product 

Weight 

Shelf Pack 

Qty. 










756



End A 

Fastener Size 

End A 

Width 

End A 

Thickness 

Tang 

Diameter Min 

Overall 

Length 

Tang Diameter 

Max 

Tang 

Length 

Product 

Weight 

Shelf Pack 

Qty. 






■■Straight Handle Design Transmits Force More Effectively to the 

Fastener 




Binding. 

■■Extra Heavy Duty Head Area Gives Maximum Strength and 

Durability. 


SAE Open End Black Oxide Construction Wrenches 


End A 

Fastener 

Size 

End A 

Width 

End A 

Thickness 

Tang 

Diameter 

Min 

Overall 

Length 

Tang 

Diameter 

Max 

Tang 

Length 

Product 

Weight 

Shelf Pack 

Qty. 


















■■Large Jaw Capacity Fits Fasteners Up to 1-1/8 Inches 




Binding. 

■■Adjustable Jaw Eliminates the Need for Carrying Several Fixed 

Head Construction Wrenches 


Adjustable Black Oxide Construction Wrench 

6 


Cat. No. UPC No. Packaging Jaw Capacity Length Product Weight Shelf Pack Qty. 

32-495 781412324952 Bagged 1-1/2 in 16.000 in 2.93 lb 1 

757



■■For Use Where a Hammer or Sledge is Required to Create 

Extreme Force / Torque Necessary to Loosen or Tighten Large 

Fasteners 

■■Large Striking Surface for More Efficient Hammer Contact, More 

Force Being Applied to the Fastener 

■■Offset Round Handle Design to Clear Obstructions 

■■Handle Length Permits Use in Confined Areas 


12 Point SAE 45° Offset Striking Wrenches 





End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

33-034 781412330342 Bulk 1-1/16 in 1.750 in 0.750 in 1.125 in 1.125 in 10.500 in 2.18 lb 1 














33-064 781412330649 Bulk 2 in 3.125 in 1.250 in 1.937 in 1.500 in 13.250 in 5.70 lb 1 














758





Fasteners 



■■Offset Round Handle Design to Clear Obstructions 


■■Box End Opening is Designed to Remain Engaged to the 

Fastener When the Wrench is Struck 

12 Point Metric 45° Offset Striking Wrenches 




End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

59-032 781412590326 Bulk 32 mm 2.059 in 0.811 in 1.185 in 1.122 in 11.000 in 2.60 lb 1 


59-041D 781412590418 Bulk 41 mm 2.594 in 1.059 in 1.374 in 1.311 in 12.000 in 4.40 lb 1 












Fasteners 



■■Straight Rectangular Handle Design Withstands Heavy Sledging, 

Resists Springing, Transmits Force More Effectively to the 

Fastener. 



12 Point SAE Straight Pattern Slugging Wrenches 




End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 














6 


759






End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 































Fasteners 





Fastener. 



6 Point SAE Straight Pattern Slugging Wrenches 




End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 

33-534 781412335347 Bulk 1-1/16 in 1.781 in .0625 in 1.000 in 0.813 in 9.875 in 1.71 lb 1 







760





End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 











Fasteners 





Fastener. 


■■Box End Opening is Designed to Remain Engaged to the 

Fastener When the Wrench is Struck 

12 Point Metric Straight Pattern Slugging Wrenches 




End A 


End B 

Thickness 

Overall 

Length 

Product 

Weight 

Shelf Pack 

Qty. 












6 


761


Spanner Wrenches - Face 


■■Incorporates Two Fixed Pins Which Are Designed to Adjust 

Threaded Collars, Locknuts, Rings, Packing Nuts, in Industrial 

Applications. 



Durability 

■■Meets or Exceeds US Federal Spec. GGG-W-665B 


Pin Distance 

Center to Center Pin Diameter Pin Height Overall Length Product Weight Shelf Pack Qty. 

34-101 781412341010 Bagged 1 in 3/16 in 3/16 in 4.500 in 0.11 lb 1 

34-104 781412341041 Bagged 1-1/4 in 7/32 in 7/32 in 5.000 in 0.14 lb 1 









34-130D 781412341300 Bagged 3-1/2 in 5/16 in 5/16 in 9.750 in 0.73 lb 1 





■■Incorporates Two Adjustable Pins Which Are Designed to Adjust 


Applications. 



Durability 


Spanner Wrenches - Adjustable Face 


Capacity Diameter 

Adjustable Max Pin Diameter Pin Height Overall Length Product Weight Shelf Pack Qty. 




762


Spanner Wrenches - Pin 


■■Incorporates One Fixed Pin Which is Designed to Adjust 


Applications. 



Durability 



Capacity 

Diameter Fixed Pin Diameter Pin Height Overall Length Product Weight Shelf Pack Qty. 

34-201D 781412342017 Bagged 1 in 3/16 in 5/32 in 4.000 in 0.10 lb 1 















6 


■■Incorporates One Adjustable Hook Which is Designed to Adjust 


Applications. 



Durability 


Spanner Wrenches - Adjustable Hook 



Adjustable Min 


Adjustable Max Overall Length Product Weight Shelf Pack Qty. 

34-301 781412343014 Bagged 3/4 in 2 in 6.375 in 0.28 lb 1 

34-305 781412343052 Bagged 1-1/4 in 3 in 8.125 in 0.54 lb 1 

34-307 781412343076 Bagged 2 in 4-3/4 in 11.375 in 1.10 lb 1 

34-310 781412343106 Bagged 4-1/2 in 6-1/4 in 12.375 in 2.60 lb 1 

34-313 781412343137 Bagged 6-1/8 in 8-3/4 in 13.750 in 2.80 lb 1 


763





Applications. 



Durability 

■■Meets or Exceeds US Federal Spec. GGG-W-665b 

4 Pc. Spanner Wrench Set - Adjustable Hook 


34-376 781412343762 Boxed 2.70 lb 1 


34-301 Adjustable Hook Spanner Wrench 3/4-2" 34-307 Adjustable Hook Spanner Wrench 2-4-3/4" 

34-305 Adjustable Hook Spanner Wrench 1-1/4-3" 34-310 Adjustable Hook Spanner Wrench 4-1/2-6-1/4" 




Applications. 



Durability 


Spanner Wrenches - Adjustable Pin 




Adjustable Min 


Adjustable Max Pin Diameter Pin Height Overall Length 

Product 

Weight 

Shelf Pack 

Qty. 

34-351 781412343519 Bagged 3/4 in 2 in 1/8 in 1/8 in 6.375 in 0.26 lb 1 

34-354 781412343540 Bagged 3/4 in 2 in 3/16 in 5/32 in 6.375 in 0.26 lb 1 

34-358 781412343588 Bagged 1-1/4 in 3 in 3/16 in 3/16 in 8.125 in 0.53 lb 1 

34-361 781412343618 Bagged 1-1/4 in 3 in 1/4 in 7/32 in 8.125 in 1.00 lb 1 

34-363 781412343632 Bagged 2 in 4-3/4 in 1/4 in 1/4 in 11.375 in 1.05 lb 1 

34-366 781412343663 Bagged 4-1/2 in 6-1/4 in 3/8 in 1/4 in 12.375 in 1.40 lb 1 


■■A Thin Head Angled 15° and a Short Handle Allow Wrenches to 

Fit Into Areas with Limited Clearance. 



Durability 


SAE Check Nut Wrenches - Carbon Steel 



31-316D 781412313161 Bagged 1/2 in 1.125 in 0.156 in 3.937 in 0.09 lb 1 





764



■■Open End is Offset 15° for Turning a Fastener in a 30° Arc 



Durability 


GGG-W-636E 

SAE Open End Single Head Black Oxide Wrench 

Cat. No. UPC No. Packaging Fastener Size End A Width End A Thickness Overall Length Product Weight Shelf Pack Qty. 





























31-096D 781412310962 Bagged 3 in 7.500 in 1.437 in 30.000 in 25.06 lb 1 

6 


765


Pipe Wrenches - Steel Handle 


■■Cast-Iron Housing and I-Beam Handle Provides Maximum 

Strength and Safety 

■■Forged Hook Jaw, Featuring Easing Spinning Adjusting Nut, Self- 

Cleaning Threads Provides Instant Gripping and Release of Pipe 


Cat. No. UPC No. Packaging Pipe Size Max Pipe Size Min Overall Length Rplc. Part Product Weight Shelf Pack Qty. 

73-006 781412730067 Bulk 0.750 in 0.125 in 6 in 95-056 Insert Jaw with Pin for 6 0.44 lb 1 









■■Aluminum Housing and I-Beam Handle is on Average 40% 

Lighter than a Cast Iron Equivalent 

■■Forged Hook Jaw, Featuring Easing Spinning Adjusting Nut, Self- 

Cleaning Threads Provides Instant Gripping and Release of Pipe 

Pipe Wrenches - Aluminum Handle 


Cat. No. UPC No. Packaging Pipe Size Max Pipe Size Min Overall Length Rplc. Part Product Weight Shelf Pack Qty. 







Flange Jacks 


■■For Use Separating Flanges Without Disassembly of Pipes Lines 

When Gaskets Are to Be Replaced 

■■Must Be Used in Pairs for Even Distribution of Pressure 

■■Exert Tremendous Pressure Smoothly and Evenly with No Shock 

Along the Pipe Line 

■■Flanges Are Separated Quickly and Held in Perfect Alignment 



Durability 


Capacity; 

Standard Raised 

Face Flanges: 125 

Lb. Cast Iron (in. ) 

Capacity; 

Standard Raised 

Face Flanges: 150 

Lb. Steel (in. ) 

Capacity; Standard 

Raised Face 

Flanges: 250 Lb. 

Cast Iron (in. ) 

Capacity; Standard 

Raised Face Flanges: 

300 Lb. Steel (in. ) 

Weight Per 

Pair (lbs ) 

Product 

Weight 

Shelf Pack 

Qty. 

73-305 781412733051 Bulk 2.00 - 20.00 2.00 - 20.00 1.00 - 12.00 0.75 - 12.00 13.00 lb 13.00 lb 1 

73-310 781412733105 Bulk 16.00 - 48.00 18.00 - 24.00 12.00 - 30.00 12.00 - 24.00 45.00 lb 24.99 lb 1 

766



■■Designed for Hand-Tightening Various Threaded Connections 

Around the Rigsite Consisting of a Handle, a Set of Gripping 

Die Teeth, a Length Of Flat Chain and a Hooking Slot Where the 

Chain may be Adjusted to Fit the Pipe 

■■Single End Jaws for General, All-Around Use 

■■Jaws are Drop Forged from Allow Steel with Precision Milled 

Teeth and then Heat Treated For Long Life and Durability 

■■Flat Link Chain is Manufactured in-House from Alloy Steel and 

Heat Treated. After Heat Treat Each Chain is Proof-Tested to 2/3 

of its Breaking Strain and Shipped with a Seal Indicating it has 

been Tested 


Chain Pipe Tongs - Single End Jaws 

Cat. No. UPC No. Packaging Pipe Size Max Pipe Size Min Chain Length Overall Length Rplc. Part Product Weight Shelf Pack Qty. 

73-205 781412732054 Bulk 2.500 in 0.250 in 17.500 in 27.000 in 95-152 FLAT CHAIN 9.46 lb 1 





■■Designed for Hand-Tightening Various Threaded Connections 

Around the Rigsite Consisting of a Handle, a Set of Gripping 

Die Teeth, a Length Of Flat Chain and a Hooking Slot Where the 

Chain may be Adjusted to Fit the Pipe 

■■Double End Jaws with Teeth on Both Ends Allow the Operator 

to Turn Pipe in Either Direction without Removing the Tong or 

Unhooking the Chain. Jaws can be Reversed if Teeth Become 

Burred or Dull 

■■Jaws are Drop Forged from Allow Steel with Precision Milled 

Teeth and then Heat Treated For Long Life and Durability 

■■Flat Link Chain is Manufactured in-House from Alloy Steel and 

Heat Treated. After Heat Treat Each Chain is Proof-Tested to 2/3 

of its Breaking Strain and Shipped with a Seal Indicating it has 

been Tested 


Chain Pipe Tongs - Double End Jaws 

Cat. No. UPC No. Packaging Pipe Size Max Pipe Size Min Chain Length Overall Length Rplc. Part Product Weight Shelf Pack Qty. 






6 


767



■■Tension Spring Stabilizes Jaw and Knurl Adjusts Easily 

■■Tapered Tang for Aligning Bolt Holes or Other Mating Parts 

■■Alloy Steel and Heat Treated for Toughest Jobs 

■■Black Oxide Finish Resists Corrosion 

Construction Wrench, Black Oxide Finish 


AT10SPUD 037103200396 Carded 1-1/8 in 10 in 0.95 lb 1 

AT115SPUD 037103190345 Carded 1-1/2 in 16 in 2.35 lb 1 

■■General Purpose Adjustable Automobile Wrench 

■■Sliding Jaw 

■■Forged From Crescent® Special Analysis Tool Steel 

■■Chrome-Plated 

■■Precision Machined; Exceeds Government Specifications 

Automobile Adjustable Wrenches 


C79H 043127133183 Carded 2-3/4 in 9 in 1.01 lb 6 

C711H 043127135163 Carded 3 in 11 in 1.50 lb 6 

C715 043127213021 Boxed 3-5/8 in 15 in 3.20 lb 1 

C718 043127067914 Boxed 4-3/8 in 18 in 4.60 lb 1 


Chain Wrenches 

■■Double-Action Allows Use in Either Direction 

■■Designed for Confined Areas When Ordinary Pipe Wrenches Will 

Not Fit 

■■Excellent for Pipe Fittings 

■■Concave-Cut Teeth for Improved Gripping; Easily Resharpened 

If Needed 

■■U.S. Patent No. 3304817 

■■Chrome Plated to Resist Rust 

■■Strong I-Beam Handle Construction 

Cat. No. UPC No. Packaging Pipe Size Max Chain Length Overall Length Rplc. Part Product Weight Shelf Pack Qty. 

CW12H 043127143175 Carded 4 in 15 in 15 in Replacement Chain: CW12C 1.85 lb 6 

CW15 043127212925 Boxed 5 in 19 in 19 in Replacement Chain: CW15C 2.75 lb 1 

CW24 043127212956 Boxed 6 in 23 in 24 in Replacement Chain: CW24C 3.60 lb 1 

768

A D J U S T A B L E W R E N C H E S 

■■World Famous Crescent® Brand, Made in the USA 

■■For Professional, Industrial or Home Use 

■■Wide Capacity Jaw Allows Each Tool to Work with More 

Fastener Sizes 

■■Wider Handle Provides More Comfort and Less Stress 

to the Hand 


■■Alloy Steel and Heat Treated 

■■Proportioned Dimensions for Greatest Strength and 

Minimum Weight 

■■Chrome Plated Finish Resists Rust and Corrosion 

■■Polished Head and Regular, Satin Finished Handle 

Chrome Plated Adjustable Wrenches, 

First Generation 


AC14 037103461681 Bagged 0.500 in 4.000 in 0.10 lb 6 

AC14V 037103461698 Carded 0.500 in 4.000 in 0.19 lb 6 





AC110 037103463036 Boxed 1.313 in 10.000 in 1.09 lb 6 


AC112 037103463166 Boxed 1.500 in 12.000 in 1.75 lb 6 



■■Wider Knurl for Easier Adjustment 

■■Laser Etched Scale Provides a Quick and Convenient Way 

to Determine Fastener Size in Either SAE or Metric 



■■Wider Handle Provides More Comfort and Less Stress to the 

Hand 







Chrome Plated Adjustable Wrenches, 

Second Generation 


AC24BK 037103265050 Bagged 0.500 in 4.000 in 0.13 lb 6 

AC24VS 037103144584 Carded 0.500 in 4.000 in 0.16 lb 3 





AC210BK 037103265081 Boxed 1.313 in 10.000 in 1.20 lb 6 

6 


769













■■Tapered, Satin Finished Handle for Better Two-Hand Grip and 

Less Weight 

Tapered Handle Chrome Plated Adjustable Wrenches, 



AC115 037103463296 Carded 1.688 in 15.000 in 2.70 lb 1 













■■Tapered, Satin Finished Handle for Better Two-Hand Grip and 

Less Weight 

Tapered Handle Chrome Plated Adjustable Wrenches, 









770


Cushion Grip Adjustable Wrenches, First Generation 






to the Hand 






■■Polished Head and Red Non-Slip Cushion Grip 


AC14C 037103461704 Bagged 0.500 in 4.000 in 0.20 lb 6 

AC14CV 037103461711 Carded 0.500 in 4.000 in 0.14 lb 6 





AC110C 037103463050 Boxed 1.313 in 10.000 in 1.17 lb 6 












to the Hand 







Cushion Grip Adjustable Wrenches, 



AC24CBK 037103265135 Bagged 0.500 in 4.000 in 0.13 lb 6 

AC24CVS 037103254146 Carded 0.500 in 4.000 in 0.15 lb 3 





AC210CBK 037103265166 Boxed 1.313 in 10.000 in 1.20 lb 6 

6 


771












to the Hand 






■■Polished Head and Regular Handle, Non-Slip Grip 

Black Oxide Adjustable Wrenches, First Generation 



AT14 037103461759 Bagged 0.500 in 4.000 in 0.15 lb 6 

AT14V 037103461766 Carded 0.500 in 4.000 in 0.19 lb 6 





AT110 037103463104 Boxed 1.313 in 10.000 in 1.09 lb 6 


AT112 037103463241 Boxed 1.500 in 12.000 in 1.75 lb 6 


772









to the Hand 







Black Oxide Adjustable Wrenches, 



AT24BK 037103265197 Bagged 0.500 in 4.000 in 0.13 lb 6 

AT24VS 037103254054 Carded 0.500 in 4.000 in 0.15 lb 3 





AT210BK 037103265227 Boxed 1.313 in 10.000 in 1.06 lb 6 




6 





■■Proportioned Dimensions for Greatest Strength and Minimum 

Weight 


■■Tapered Handle for Better Two-Handed Grip and Less Weight 

Black Oxide Tapered Handle Adjustable Wrenches, 



AT115 037103463333 Carded 1.688 in 15.000 in 3.10 lb 1 

AT118 037103463395 Carded 2.063 in 18.000 in 5.05 lb 1 


773











■■Tapered Handle for Better Two-Handed Grip and Less Weight 

Black Oxide Tapered Handle Adjustable Wrenches, 











to the Hand 







Black Oxide Cushion Grip Adjustable Wrenches, 



AT16C 037103461896 Bagged 0.938 in 6.000 in 0.30 lb 6 

AT18C 037103462022 Bagged 1.125 in 8.000 in 0.63 lb 6 

AT18CV 037103462039 Carded 1.125 in 8.000 in 0.60 lb 6 

AT110C 037103463128 Boxed 1.313 in 10.000 in 1.00 lb 6 


AT112C 037103463265 Boxed 1.500 in 12.000 in 1.70 lb 6 


774






■■Wide Capacity Jaw Allows Each Tool to Work with More Fastener 

Sizes 


to the Hand 







Black Oxide Cushion Grip Adjustable Wrenches, 



AT26CBK 037103265265 Bagged 0.938 in 6.000 in 0.34 lb 6 

AT26CVS 037103256140 Carded 0.938 in 6.000 in 0.34 lb 3 

AT28CBK 037103265272 Bagged 1.125 in 8.000 in 0.60 lb 6 


AT210CBK 037103265289 Boxed 1.313 in 10.000 in 1.20 lb 6 


AT212CBK 037103265296 Boxed 1.500 in 12.000 in 1.92 lb 6 


RapidSlide Adjustable Wrenches 

■■Slide Button Mechanism in Handle for Quick, Fast Adjustment 

■■DIY, Industrial or Professional Use 

■■1.25” Jaw Capacity Allows Tool to Work with Various 


■■Wide Handle for Increased Leverage 

■■Debris Shield Protects Slide Mechanism, and Maintains 

a Smooth Operation 

■■Forged Steel 

■■Chrome Finish Resists Rust and Corrosion 

■■Polished Head 

■■SAE/Metric Size Indicator on Jaw 


AC6NKWMP 037103226761 Carded 0.938 in 6.000 in 0.65 lb 6 



6 


775


■■Versatile - Adjustable Jaw Fits Over 50 Fasteners 

■■Speed - Spring-Loaded, Ratcheting Jaw Turns Fasteners Quickly 

■■Access - Locking Pivot Helps Reach Around Obstacles in Tight 

Spaces 

■■Portable- Folding Wrench Head for Convenient Storage and 

Transport 

2 Pc. Folding Flip and Grip Wrench Set 


CFW2 037103266484 Carded 0.97 lb 3 

Replacement Adjustable Wrench Jaws, 




AC115J 037103463302 Bagged Replacement Jaw for AC115 Adjustable Wrench 0.50 lb 1 



AT115J 037103463340 Bagged Replacement Jaw for AT115 Adjustable Wrench 0.60 lb 1 

AT118J 037103463401 Bagged Replacement Jaw for AT118 Adjustable Wrench 1.00 lb 1 

Replacement Adjustable Wrench Pins, Springs and 

Knurls, First Generation 


AC115PSK 037103470317 Bagged Replacement Pin, Spring and Knurl for AC115 Adjustable Wrench 0.10 lb 1 



776







to the Hand 







3 Pc. 6, 8, 10" Chrome Plated Adjustable Wrench 

Set, First Generation 


AC3 037103139610 Boxed 2.13 lb 1 


AC16 6" Chrome Finish Adjustable Wrench AC110 10" Chrome Finish Adjustable Wrench 

AC18 

8" Chrome Finish Adjustable Wrench 



■■Laser Etched Scale Provides a Quick and Convenient Way to 

Determine Fastener Size in Either SAE or Metric 


Sizes 


Hand 




Weight 



2 Pc. 8, 12" Chrome Adjustable Wrench Set, Second 

Generation 


AC2812VS 037103255655 - 2.45 lb - 


AC28VS 8" Chrome Finish Adjustable Wrench AC212VS 12" Chrome Finish Adjustable Wrench 

6 


777







to the Hand 







3 Pc. 6, 8, 10" Cushion Grip Chrome Plated 

Adjustable Wrench Set, First Generation 


AC3C 037103139627 Boxed 2.31 lb 1 


AC16C 6" Chrome Finish Adjustable Wrench, Cushion Grip AC110C 10" Chrome Finish Adjustable Wrench, Cushion Grip 

AC18C 8" Chrome Finish Adjustable Wrench, Cushion Grip 




■■Wide Capacity Jaw Allows Tool to Work with More 



to the Hand 







5 Pc. 4, 6, 8, 10, 12" Chrome Plated Adjustable 

Wrench Set, First Generation 


AC5 037103194510 Boxed 2.85 lb 1 




AC18 

8" Chrome Finish Adjustable Wrench 

778







to the Hand 







3 Pc. 6, 8, 10" Black Oxide Adjustable Wrench Set, 



AT3 037103194527 Boxed 1.90 lb 1 


AT16 6" Black Oxide Finish Adjustable Wrench AT110 10" Black Oxide Finish Adjustable Wrench 

AT18 

8" Black Oxide Finish Adjustable Wrench 



■■Laser Etched Scale Provides a Quick and Convenient Way to 

Determine Fastener Size in Either SAE or Metric 


Sizes 


Hand 




Weight 



2 Pc. 6, 10" Black Oxide Cushion Grip Adjustable 

Wrench Set, Second Generation 


AT2610cvs 037103254108 - 2.00 lb - 


AT26CVS 6" Black Oxide Finish Adjustable Wrench, Cushion Grip AT210CVS 10" Black Oxide Finish Adjustable Wrench, Cushion Grip 

6 


779


■■Slide Button Mechanism in Handle for Quick, Fast Adjustment 

■■DIY, Industrial or Professional Use 

■■15/16” and 1.2” Jaw Capacity Works with Various Fastener Sizes 

■■Debris Shield Protects Slide Mechanism, and Maintains 

a Smooth Operation 


■■Chrome Finish Resists Rust and Corrosion 


■■SAE/Metric Size Indicator on Jaw 

2 Pc. 6, 10" Rapidslide Adjustable Wrench Set 


AC610RS 037103226778 Carded 1.15 lb 1 


AC6NKWMP 6" RapidSlide Adjustable Wrench AC10NKWMP 10" RapidSlide Adjustable Wrench 

■■Cushion Grip for Greater Comfort 

■■Polished Chrome Head 

3 Pc. Cushion Grip Adjustable Wrench Set 



81990 099575819902 Carded 2.11 lb 1 


81890 6" Adjustable Wrench w/Cushion Grip 81892 10" Adjustable Wrench w/Cushion Grip 


■■Cushion Grip for Greater Comfort 


Sizes 

■■Polished Chrome Head 

Cushion Grip Adjustable Wrenches 


81890 099575818905 Carded 0.750 in 7.000 in 1.30 lb 1 

81891 099575818912 Carded 0.938 in 9.000 in 1.62 lb 1 

81892 099575818929 Carded 1.125 in 11.000 in 1.70 lb 1 

81893 099575818936 Carded 1.312 in 13.000 in 2.70 lb 1 

780



■■Hex Jaw Design Allows for a More Secure Fit to the Fastener 

Reducing the Chance of Slipping 

■■Handle is Up to 70% Wider for More Comfort Lessening 

Pressure on the Hand, Less Hand Fatigue 

■■Large Serrated Knurl for Smooth Easy Jaw Adjustment 



Durability 

■■Meets or Exceeds ASME B107.8M-1996 and US Federal 

Specification GGG-W-631B 

3 Pc. 8, 10, 12" Chrome Plated Adjustable Wrench Set 


28-850 781412288506 Boxed 4.06 lb 1 


28-408 8" Chrome Finish Adjustable Wrench 28-412 12" Chrome Finish Adjustable Wrench 

28-410 10" Chrome Finish Adjustable Wrench 29-474 Vinyl Roll 3 Pockets 




■■Handle is Up to 70% Wider for More Comfort Lessening 

Pressure on the Hand, Less Hand Fatigue 




Durability 



3 Pc. 8, 10, 12" Black Oxide Adjustable Wrench Set 

6 


34-850 781412348507 Boxed 3.95 lb 1 


29-474 Vinyl Roll 3 Pockets 34-410 10" Black Oxide Finish Adjustable Wrench 

34-408 8" Black Oxide Finish Adjustable Wrench 34-412 12" Black Oxide Finish Adjustable Wrench 


781


Chrome Plated Adjustable Wrenches 


■■Wide Capacity Jaw Opens Up to 25% Wider than Standard 

Adjustable Wrenches for Use on a Greater Range of Fasteners 



■■Handle is Up to 70% Wider for More Comfort, Less Hand 

Fatigue 





28-404 781412284041 Bagged 1/2 in 4.000 in 0.16 lb 1 

28-406 781412284065 Bagged 15/16 in 6.000 in 0.26 lb 1 

28-408 781412284089 Bagged 1-1/8 in 8.000 in 0.54 lb 1 

28-410 781412284102 Bagged 1-5/16 in 10.000 in 1.45 lb 1 

28-412 781412284126 Bagged 1-1/2 in 12.000 in 1.50 lb 1 

28-415D 781412284157 Bagged 1-11/16 in 15.000 in 3.37 lb 1 

28-418 781412284188 Bagged 2-1/16 in 18.000 in 5.56 lb 1 

28-424 781412284249 Bagged 2-7/16 in 24.000 in 8.25 lb 1 


Black Oxide Adjustable Wrenches 


■■Wide Capacity Jaw Opens Up to 25% Wider than Standard 

Adjustable Wrenches for Use on a Greater Range of Fasteners 



■■Handle is Up to 70% Wider for More Comfort, Less Hand 

Fatigue 





34-404 781412344042 Bagged 1/2 in 4.000 in 0.16 lb 1 

34-406 781412344066 Bagged 15/16 in 6.000 in 0.64 lb 1 

34-408 781412344080 Bagged 1-1/8 in 8.000 in 0.84 lb 1 

34-410 781412344103 Bagged 1-5/16 in 10.000 in 1.22 lb 1 

34-412 781412344127 Bagged 1-1/2 in 12.000 in 1.42 lb 1 

34-415 781412344158 Bagged 1-11/16 in 15.000 in 3.37 lb 1 

34-418 781412344189 Bagged 2-1/16 in 18.000 in 5.05 lb 1 

782

T O R Q U E W R E N C H E S 

Micrometer Torque Wrenches.......... 786 

Beam Torque Wrenches.................... 787 

Electronic Torque Wrenches............. 787 

Micrometer Torque Wrenches.......... 789 

Flex Head Micrometer....................... 792 

Electronic Torque Wrenches............. 793 

Beam Torque Wrenches ................... 794 

Dial Torque Wrenches ...................... 795 

Torque Screwdrivers ........................ 797 

Torque Wrench Adapters ................. 798 

Torque Multipliers ............................ 800 

7 

Electronic Torque Testers ................ 803 


783


Torque Wrenches 

GearWrench® torque wrenches offer the latest innovations in torque measurement, including Electronic Torque Wrenches (ETWs). 

Two GearWrench ETWs include torque angle, ensuring a more precise fastener torque level. GearWrench ETWs show torque ranges 

in foot-pounds, inch-pounds, or metric torque measurements at the push of a button. Other torque wrenches in the GearWrench line 

come in drive sizes up to 3/4" with a range of up to 600 foot-pounds. 

Sealed design guards 

against dirt infiltration 

ELECTRONIC TORQUE 

WRENCHES WITH ANGLE 

Backlit LCD screen makes 

reading torque and angle 

values quick and easy 

Digitally tracks torque and angle measurements. 

Buzzer with Red, Yellow and Green 

lights alerts you when targets are reached. 

Thin-profile, high-strength teardrop head 

flexes for easier access and features a 

60-tooth gear with 6° ratcheting arc 

Shock-resistant housing 

provides durability 

T O R Q U E W R E N C H E S 7 

MICROMETER 

TORQUE WRENCHES 

Sealed tear-drop head provides 

access and strength and keeps 

out contaminants 

Torque Accuracy: +/- 2% CW, +/- 3% CCW 

from 20% to 100% full scale. 

Angle Accuracy: +/- 1% of reading 

One-finger-operated reversible lever 

Knurled aluminum grip 

resists slipping 

Pliable, elastomer handle grip for superior 

comfort and oil resistance 

Accurate in clockwise 

direction +/- 3% in upper 

80% of the range 

Micrometer twist lock ring provides 

secure locking mechanism 

784



Armstrong ® offers a wide variety of professional Torque Tools for just about any application. All Torque Tools are made to exacting 

standards with ASME and ISO callouts where applicable. The extensive line of products range from basic beam wrenches to a variety 

of micrometer “Clicker” wrenches, dial wrenches, electronic torque wrenches and electronic testers to high output torque multipliers. 

Armstrong micrometer “Clicker” wrenches incorporate a unique linear ball bearing design that is unsurpassed in delivering accuracy 

and repeatability and are available in ranges from 5 in.-lbs. to 600 ft.-lbs. Armstrong Dial wrenches provide precise, accurate torque 

measurement in a durable, easy to read wrench and are available in ranges to 1,000 ft.-lbs. All Torque Tools are manufactured from 

high alloy steel and components using the most up-to-date manufacturing process and heat treat to optimize accuracy and durability. 

Enclosed head design with 10˚ ratcheting arc seals out 

contaminants for improved performance and longer life 

MICROMETER 

TORQUE WRENCHES 

Rubber seal between the ratchet head and tube keeps 

lubrication in and contaminants out of the torque mechanism 

assuring accuracy of and repeatability 

Torque wrap ratchet head 

design reduces stress on gear 

and pawl teeth for greater strength 

and durability 

Accuracy; +/- 3% CW from 

20% to 100% of wrench capability 

Chrome-plated, hardened steel 

body for strength and durability 

INNOVATIVE LINEAR BALL BEARING SYSTEM 

• Eliminates friction between the spring and case 

for greater accuracy and repeatability 

• Eliminates speed sensitivity errors 

• Produces a “Crisp, Audible Click” over the entire 

torque range 

DIAL TORQUE 

WRENCHES 

Calibration tape is sent 

with each wrench which 

verifies the accuracy 

Slim drive end allows easy 

access to tight spaces 

Lightly knurled & grooved 

handle provides a comfortable, 

non-slip grip 

Easy to Read Dual Scales 

- Primary scale in SAE 

- Secondary scale in Metric 

Twist detent locking ring 

allows easy setting of 

desired pre-set torque 

and prevents accidental 

change of the torque 

setting while in use 

7 

Memory indicator pointer 

remains at maximum torque for 

positive verification – valuable 

to determine breakaway torque 

Large, dual-faced dials are color coded - silver 

for English, blue for metric - quick readings 

from any angle 

Accuracy; +/- 4% CW, +/- 4% CCW from 

20% to 100% of wrench capability 

Rubber handle for comfortable grip 

(1/4", 3/8", 1/2" models) 


Electric light signal and buzzer included 

on 600, 1000 and 2000 ft.lb. models for 

distinct audible and visual notification 

Strong, corrosion 

resistant housing offers 

long-term performance 

785


■■Thin Profile, High-Strength Teardrop Head for Easy Access 

■■Features a 36-Tooth Gear with a 10° Ratcheting Arc 

■■Sealed Ratchet Head Design Guards Against Dirt Infiltration 

■■One-Finger Operated Reversible Lever 

■■Pliable, Elastomer Handle Grip for Superior Comfort and 

Oil Resistance 

■■Micrometer Twist Lock Ring Provides Secure 

Locking Mechanism 

■■Accurate in Clockwise Direction +/- 3% in Upper 80% 

of the Range 

■■Meets or Exceeds B107.14M 1994 

Cat. No. 

UPC No. 

Drive Tang 

Size 

Primary Scale Range 

- Max Torque 

Primary Scale 

Increments 

Alternate Scale 

Range - Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

3261D* 082171032615 1/4 in 5 in/lb - 50 in/lb 1 in/lb 0.58 Nm - 6.2 Nm 0.11 Nm 1.100 in 1.100 in 7.9 in 1.05 lb 

85050 082171850509 1/4 in 30 in/lb - 200 in/lb 1 in/lb 3.96 Nm - 23.16 Nm 0.11 Nm 0.813 in 1.063 in 9.5 in 1.28 lb 


85052 082171850523 3/8 in 10 ft/lb - 100 ft/lb 0.5 ft/lb 16.9 Nm - 138.9 Nm 0.7 Nm 1.063 in 1.5 in 17.1 in 3.20 lb 

85053 082171850530 1/2 in 20 ft/lb - 150 ft/lb 1 ft/lb 20.3 Nm - 210.1 Nm 1.4 Nm 1.438 in 1.75 in 20.5 in 4.07 lb 

85054 082171850547 1/2 in 20 ft/lb - 250 ft/lb 1 ft/lb 43.4 Nm - 348.4 Nm 1.4 Nm 1.438 in 1.75 in 24 in 4.69 lb 

* 3216D is a round head ratchet with 45 tooth gear 

Micrometer Torque Wrenches 

Head 

Width 

Overall 

Length 

Product 

Weight 


■■Specifically for Checking Wheel Lug Nuts to Manufacturer 

Recommended Torque Value 

■■Helps Prevent the Warpage of Break Rotors Caused 

By Over Torqueing 

■■Tough "Tire Tread" Rubber Cover on Head, Lock Ring and 

Handle Provides Cushioning Effect to Reduce Fatigue and 

Tool Damage 

■■45-Tooth Gear with 8° Ratcheting Arc 


of the Range 

Cat. No. 

UPC No. 

Drive Tang 

Size 

1/2" Drive Micrometer Tire Shop Torque Wrench 

Primary Scale 


Primary Scale 

Increments 

Alternate Scale Range 

- Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

3498 082171034985 1/2 in 25 ft/lb - 250 ft/lb 1 ft/lb 47.5 Nm - 345.7 Nm 3.4 Nm 1.75 in 1.75 in 21.38 in 6.06 lb 

■■45-Tooth Gear with 8° Ratcheting Arc 


of the Range 

■■Forward/Reverse Control Dial on the Head 





■■Meets or Exceeds ASME B107.14M 1994 and ISO 6789 

Head 

Width 

3/4" Drive Micrometer Torque Wrenches 

Overall 

Length 

Product 

Weight 

Cat. No. 

UPC No. 

Drive Tang 

Size 


- Max Torque 

Primary Scale 

Increments 



Alt Scale 

Increments 

Head 

Thickness 

85055 082171850554 3/4 in 100 ft/lb - 600 ft/lb 2.5 ft/lb 153 Nm - 830 Nm 3.4 Nm 2.620 in 2.45 in 40.5 in 15.81 lb 

Head 

Width 

Overall 

Length 

Product 

Weight 

786


Micrometer Torque Wrench, Flex Head Ratcheting 

■■Thin Profile, High-Strength Teardrop Head for Easy Access, 

Features a 36-tooth Gear with a 10° Ratcheting Arc 

■■Sealed Ratchet Head Design Guards Against Dirt Infiltration 

■■One-Finger Operated Reversible Lever 






of the Range 

■■Head Flexes up to 15 Degrees for Increased Access 

Cat. No. 

UPC No. 

Drive Tang 

Size 

Primary Scale 


Primary Scale 

Increments 



Alt Scale 

Increments 

Head Width 

85056 082171850561 3/8 in 5 ft/lb - 75 ft/lb 0.5 ft/lb 6.8 Nm - 101.6 Nm 0.7 Nm 1.50 in 19 in 4.07 lb 

85057 082171850578 1/2 in 25 ft/lb - 250 ft/lb 1 ft/lb 43.4 Nm - 348.4 Nm 1.4 Nm 1.750 in 27 in 4.65 lb 

Overall 

Length 

Product 

Weight 

■■Directly Measure a Variety of Torque Values When Tightening 

Fasteners 

■■Pointer Moves Clockwise or Counter-Clockwise (+/-4%) 

to Measure Torque 

■■Scale Includes Both SAE (In/Lb, Ft/Lb) and Metric (Nm) 

■■Serviceable By Bending Pointer to Zero Before Use 

■■Palm-Fit Handle Pivots on Beam to Maintain Constant Distance 

From Drive Point to Load Point for Precise Measurement 

Beam Torque Wrenches 

Cat. No. UPC No. Drive Tang Size 


- Max Torque 

Primary Scale 

Increments 



Alt Scale 

Increments Overall Length Product Weight 

2955D 082171029554 1/4 in 0 in/lb - 60 in/lb 2.5 in/lb 0 Nm - 7 Nm 0.25 Nm 11 in 0.8 oz 

2956D 082171029561 3/8 in 0 in/lb - 600 in/lb 50 in/lb 0 Nm - 68 Nm 12.00 Nm 16 in 1.0 lb 

2957D 082171029578 1/2 in 0 ft/lb - 150 ft/lb 5 ft/lb 0 Nm - 190 Nm 27.00 Nm 20 in 2.5 lb 

7 

■■Perfect for Tire Pressure Systems and Other Sensitive 

Torque Applications 

■■Flexible 1/4" Drive Tang 

■■Red Light and Buzzer Signal Indicate Torque Setting Reached 


Cat. No. 

UPC No. 

Drive 

Tang Size 

1/4" Drive Electronic Torque Wrench 


- Max Torque 

Primary Scale 

Increments 



Alt Scale 

Increments 

Head 

Thickness 


Head 

Width 

Overall 

Length 

Product 

Weight 


787


■■Digitally Tracks Torque Measurement. Buzzer with Red, Yellow 

and Green Lights Alerts You When Target Torque is Reached 

■■Converts Ft-Lb, In-Lb and Nm at the Touch of A Button 

■■Thin-Profile, High-Strength Teardrop Head for Easy Access 

Features a 60-Tooth Gear with a 6° Ratcheting Arc 

■■Accuracy in Clockwise Direction +/- 2%, in Counter Clockwise 

Direction +/-3%, From 20% to 100% Full Scale 

■■Knurled Aluminum Grip Resists Slipping 

■■Operates on 4 AAA Batteries for Up to 40 Hours 

of Continuous Operation 


Cat. No. 

UPC No. 

Drive 

Tang Size 


- Max Torque 

Electronic Torque Wrenches 

Primary Scale 

Increments 


- Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

85070 082171850707 3/8 in 10 ft/lb - 100 ft/lb 1 ft/lb 13.6 Nm - 135.6 Nm 1 Nm 0.960 in 1.240 in 17.75 in 5.20 lb 

85071 082171850714 1/2 in 25 ft/lb - 250 ft/lb 1 ft/lb 33.9 Nm - 339 Nm 1 Nm 1.310 in 1.810 in 26.5 in 5.00 lb 

Head 

Width 

Overall 

Length 

Product 

Weight 


■■Digitally Tracks Torque and Angle Measurements. Buzzer with 

Red, Yellow and Green Lights Alerts You When Target Torque 

is Reached 

■■Converts Ft-Lb, In-Lb and Nm at the Touch of A Button 

■■Thin-Profile, High-Strength Teardrop Flex Head for Easy Access 

Features a 60-Tooth Gear with a 6° Ratcheting Arc 

■■Accuracy in Clockwise Direction +/- 2%, in Counter Clockwise 

Direction +/-3%, From 20% to 100% Full Scale 

■■Knurled Aluminum Grip Resists Slipping 




Cat. No. 

UPC No. 

Drive Tang 

Size 

Electronic Torque Wrenches, Flex Head 

with Angle 

Primary Scale 


Primary Scale 

Increments 


- Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

85073 082171850738 3/8 in 10 ft/lb - 100 ft/lb 1 ft/lb 13.6 Nm - 135.6 Nm 1 Nm 0.960 in 1.240 in 17.75 in 5.40 lb 

85074 082171850745 1/2 in 25 ft/lb - 250 ft/lb 1 ft/lb 33.9 Nm - 339 Nm 1 Nm 1.310 in 1.810 in 26.5 in 5.82 lb 

Head 

Width 

Overall 

Length 

Product 

Weight 

788


Micrometer Torque Wrenches 


■■Innovative Linear Ball Bearing Design Mechanism for Improved 

Performance; 1) Eliminates Friction Between Spring and Case for 

Greater Accuracy, 2) Eliminates Speed Sensitivity Errors, and 3) 

Produces a “Crisp Audible Click” Over the Entire Range 

■■Twist Detent Locking Ring Allows Easy Setting of Desired Pre- 

Set Torque and Prevents Accidental Change of the Torque 

Setting While in Use 

■■Rubber Seal Between the Ratchet Head and Tube Keeps 

Lubrication in and Contaminants Out of the Torque Mechanism 

Assuring Accuracy and Repeatability 

■■Ratchet Head is Specifically Designed for Torque Wrenches with 

More Material in High Stress Areas 

■■Enclosed Head Design with 10 Degree Ratcheting Arc Seals Out 

Contaminants for Improved Performance and Longer Life 

■■Torque Wrap Ratchet Head Design Reduces Stress on Gear and 

Pawl Teeth for Greater Strength and Durability 

■■Lightly Knurled and Grooved Handle Provides a Comfortable, 

Non-Slip Grip 

■■Accuracy; +/- 3% CW From 20% to 100% of Wrench Capability 


Cat. No. 

UPC No. 

Drive 

Tang 

Size 

Primary Scale 

Range - Max 

Torque 

Primary 

Scale 

Increments 

Alternate 

Scale Range - 

Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

Head 

Width 

Overall 

Length 

Ratchet 

Repair 

Kit 

Repl. 

Case 

Product 

Weight 

64-031 781412640311 1/4 in 

5 in/lb - 50 

in/lb 

1 in/lb 

0.58 Nm - 

6.21 Nm 

0.11 Nm 0.813 in 1.063 in 8.000 in 64-036 64-293 0.71 lb 

64-032 781412640328 1/4 in 

30 in/lb - 

200 in/lb 

1 in/lb 4 Nm - 23 Nm 0.11 Nm 0.813 in 1.063 in 9.500 in 64-036 64-293 1.38 lb 

64-038 781412640380 1/4 in 

4 Nm - 25 

Nm 

0.1 Nm - - - - 0.813 in 1.063 in 9.500 in 64-036 64-293 0.76 lb 

64-041 781412640410 3/8 in 

50 in/lb - 

250 in/lb 


7 

64-042 781412640427 3/8 in 

100 in/lb - 

1000 in/lb 

5 in/lb 

14 Nm - 116 

Nm 

0.6 Nm 1.063 in 1.500 in 17.100 in 64-078 64-295 2.05 lb 

64-046 781412640465 3/8 in 

10 ft/lb - 100 

ft/lb 

0.5 ft/lb 

17 Nm - 139 

Nm 

0.7 Nm 1.063 in 1.500 in 17.100 in 64-078 64-295 3.34 lb 

64-049 781412640496 3/8 in 

64-081 781412640816 1/2 in 

64-082 781412640823 1/2 in 

64-084 781412640847 1/2 in 

64-085 781412640854 1/2 in 

64-086 781412640861 1/2 in 

64-089 781412640892 1/2 in 

10 Nm - 100 

Nm 

240 in/lb - 

1800 in/lb 

300 in/lb - 

3000 in/lb 

10 ft/lb - 100 

ft/lb 

10 ft/lb - 150 

ft/lb 

25 ft/lb - 250 

ft/lb 

40 Nm - 340 

Nm 

1 Nm - - - - 1.063 in 1.500 in 17.100 in 64-078 64-295 2.05 lb 

12 in/lb 

18 in/lb 

0.5 ft/lb 

1 ft/lb 

1 ft/lb 

34 Nm - 210 

Nm 

43 Nm - 348 

Nm 

17 Nm - 139 

Nm 

20 Nm - 210 

Nm 

43 Nm - 348 

Nm 

1.4 Nm 1.438 in 1.750 in 20.500 in 64-092 64-297 2.45 lb 

2.03 Nm 1.438 in 1.750 in 20.500 in 64-092 64-297 2.45 lb 

0.7 Nm 1.250 in 1.500 in 17.100 in 64-092 64-295 2.05 lb 

1.4 Nm 1.438 in 1.750 in 20.500 in 64-092 64-297 2.45 lb 

2.03 Nm 1.438 in 1.750 in 24.000 in 64-092 64-298 2.45 lb 

1 Nm - - - - 1.438 in 1.750 in 24.000 in 64-092 64-298 2.45 lb 


789



■■Includes "Certificate of Calibration". Certification is the 

Documentation of the Actual Calibration of the Torque Wrench to 

Include; Model Number, Serial Number, Date, Actual Readings, 

Type of Test Equipment, and Test Equipment Calibration 

Standards 







Setting While in Use 











Non-Slip Grip 


Micrometer Certified Torque Wrenches 

Cat. No. 

UPC No. 

Drive 

Tang 

Size 

Primary 

Scale Range 

- Max Torque 

Primary 

Scale 

Increments 


Range - Max 

Torque 

Alt Scale 

Increments 

Head 

Thickness 

Head 

Width 

Overall 

Length 

Ratchet 

Repair 

Kit 

Repl. 

Case 

Product 

Weight 

64-931 781412649314 1/4 in 

5 in/lb - 50 

in/lb 

1 in/lb 

0.58 Nm - 6.21 

Nm 

0.11 Nm 0.813 in 1.063 in 8.000 in 64-036 64-293 0.71 lb 

64-932 781412649321 1/4 in 

30 in/lb - 

200 in/lb 



64-938 781412649383 1/4 in 

64-941 781412649413 3/8 in 

64-942 781412649420 3/8 in 

64-946 781412649468 3/8 in 

64-949 781412649499 3/8 in 

64-981 781412649819 1/2 in 

64-982 781412649826 1/2 in 

64-984 781412649840 1/2 in 

64-985 781412649857 1/2 in 

64-986 781412649864 1/2 in 

4 Nm - 25 

Nm 

50 in/lb - 

250 in/lb 

100 in/lb - 

1000 in/lb 

10 ft/lb - 

100 ft/lb 

10 Nm - 100 

Nm 

240 in/lb - 

1800 in/lb 

300 in/lb - 

3000 in/lb 

10 ft/lb - 

100 ft/lb 

10 ft/lb - 

150 ft/lb 

25 ft/lb - 

250 ft/lb 

0.1 Nm - - - - 0.813 in 1.063 in 9.500 in 64-036 64-293 0.76 lb 



0.5 ft/lb 17 Nm - 139 Nm 0.7 Nm 1.063 in 1.500 in 17.100 in 64-078 64-295 2.05 lb 

1 Nm - - - - 1.063 in 1.500 in 17.100 in 64-078 64-295 2.05 lb 


18 in/lb 

43 Nm - 348 

Nm 

2.03 Nm 1.438 in 1.750 in 20.500 in 64-092 64-297 2.45 lb 

0.5 ft/lb 17 Nm - 139 Nm 0.7 Nm 1.250 in 1.500 in 17.100 in 64-092 64-295 2.05 lb 

1 ft/lb 20 Nm - 210 Nm 1.4 Nm 1.438 in 1.750 in 20.500 in 64-092 64-297 2.45 lb 

1 ft/lb 

43 Nm - 348 

Nm 

2.03 Nm 1.438 in 1.750 in 24.000 in 64-092 64-298 2.45 lb 

64-989 781412649895 1/2 in 

40 Nm - 340 

Nm 

1 Nm - - - - 1.438 in 1.750 in 24.000 in 64-092 64-298 2.45 lb 

790







■■Twist Detent Locking Ring Allows Easy Setting of Desired 

Pre-Set Torque and Prevents Accidental Change of the Torque 

Setting While in Use. 





Non-Slip Grip 


■■A Calibration Tape is Sent with Each Wrench Which Verifies 

the Accuracy 


3/4" Drive Micrometer Torque Wrenches 

Cat. No. 

UPC No. 

Drive 

Tang Size 

64-094 781412640946 3/4 in 

64-095 781412640953 3/4 in 

64-099 781412640991 3/4 in 

Primary 

Scale Range 

- Max Torque 

50 ft/lb - 

400 ft/lb 

100 ft/lb - 

600 ft/lb 

150 Nm - 

800 Nm 

Primary 

Scale 

Increments 

2.5 ft/lb 

2.5 ft/lb 

Alternate 

Scale Range - 

Max Torque 

85 Nm - 559 

Nm 

153 Nm - 830 

Nm 

Alt Scale 

Increments 

Head 

Thickness 

Head 

Width 

Overall 

Length 

Ratchet 

Repair 

Kit 

Repl. 

Case 

Product 

Weight 

3.4 Nm 2.620 in 2.450 in 33.000 in - - 9.62 lb 

3.4 Nm 2.620 in 2.450 in 40.500 in - - 11.20 lb 

2.5 Nm - - - - 2.620 in 2.450 in 40.500 in - - 10.72 lb 



Documentation of the Actual Calibration of the Torque Wrench 

to Include; Model Number, Serial Number, Date, Actual 

Readings, Type of Test Equipment, and Test Equipment 

Calibration Standards 












Non-Slip Grip 



Cat. No. 

UPC No. 

Drive Tang 

Size 

64-994 781412649949 3/4 in 

64-995 781412649956 3/4 in 

64-999 781412649994 3/4 in 

3/4" Drive Micrometer Certified Torque Wrenches 

Primary 

Scale 

Range - Max 

Torque 

50 ft/lb - 

400 ft/lb 

100 ft/lb - 

600 ft/lb 

150 Nm - 

800 Nm 

Primary 

Scale 

Increments 

2.5 ft/lb 

2.5 ft/lb 

Alternate 

Scale 

Range - Max 

Torque 

85 Nm - 

559 Nm 

153 Nm - 

830 Nm 

Alt Scale 

Increments 

Head 

Thickness 

Head Width 

Overall 

Length 

Product 

Weight 

3.4 Nm 2.620 in 2.450 in 33.000 in 10.00 lb 

3.4 Nm 2.620 in 2.450 in 40.500 in 11.00 lb 

2.5 Nm - - - - 2.620 in 2.450 in 40.500 in 11.00 lb 

7 


791



■■Head Flexes Up to 15 Degrees for Access 

■■Includes Certification. Certification is the Documentation of 

the Actual Calibration of the Torque Wrench to Include; Model 

Number, Serial Number, Date, Actual Readings, Type of Test 

Equipment, and Test Equipment Calibration Standards 

















Micrometer Torque Wrench, Flex Head Ratcheting 

Cat. No. 

UPC No. 

Drive 

Tang Size 

Primary Scale 

Range - Max 

Torque 

Primary 

Scale 

Increments 

Alternate 

Scale 

Range - 

Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

Head 

Width 

Overall 

Length 

Ratchet 

Repair 

Kit 

Repl. 

Case 

Product 

Weight 

64-146 781412641462 3/8 in 

5 ft/lb - 75 

ft/lb 

0.5 ft/lb 

10.1 Nm - 

105.1 Nm 

0.7 Nm 1.063 in 1.500 in 19.000 in 64-078 64-295 2.95 lb 

64-186 781412641868 1/2 in 

25 ft/lb - 250 

ft/lb 

1 ft/lb 

43 Nm - 

348 Nm 

1.4 Nm 1.438 in 1.750 in 27.000 in 64-092 64-298 4.65 lb 


792




Documentation of the Actual Calibration of the Torque Wrench 




■■Head Flexes Up to 15 Degrees for Access 


















Micrometer Certified Flex Head Torque Wrench 

Cat. No. 

UPC No. 

Drive 

Tang Size 

Primary Scale 

Range - Max 

Torque 

Primary 

Scale 

Increments 

Alternate 

Scale Range 

- Max Torque 

Alt Scale 

Increments 

Head 

Thickness 

Head 

Width 

Overall 

Length 

Ratchet 

Repair 

Kit 

Repl. 

Case 

Product 

Weight 

64-954 781412649543 3/8 in 

5 ft/lb - 75 

ft/lb 

0.5 ft/lb 

10.1 Nm - 

105.1 Nm 

0.7 Nm 1.063 in 1.500 in 19.000 in 64-078 64-295 3.00 lb 

64-958 781412649581 1/2 in 

25 ft/lb - 

250 ft/lb 

1 ft/lb 

43 Nm - 348 

Nm 

1.4 Nm 1.438 in 1.750 in 27.000 in 64-092 64-298 5.00 lb 

7 

Electronic Torque Wrenches 

■■Assembled in the USA with US and Global Components 

■■Easy to Set Pre-Set Target Torque with Scroll Buttons 

■■Audible Buzzer Plus Red, Yellow, Green Indicator Lights Alert 

User When Target Torque is Approached and Reached. (Red 

Light Comes on at 96% of Preset Value to Allow for Human 

Reaction Time) 

■■Lcd Screen Indicates Torque As It is Being Applied 

■■Lcd Screen with Backlight for Easy Reading of Torque Values 

■■Simple Torque Unit Conversions with the Push of A Button: 

Ft-Lbs, In-Lbs, Nm 

■■Sleek Tapered Head with A Low Profile Design Permits Features 

60 Tooth Gear with A 6 Degree Ratcheting Arc Access in 

Extremely Confined Areas 

■■Accuracy; +/- 2% CW, +/- 3% CCW From 20% to 100% 

of Wrench Capability 





Cat. No. 

UPC No. 

Drive 

Tang 

Size 

Primary Scale 

Range - Max 

Torque 

Primary 

Scale 

Increments 



Alt Scale 

Increments 

Head 

Thickness 

Head 

Width 

Overall 

Length 

Ratchet 

Repair Kit 

Product 

Weight 

64-534 781412645347 3/8 in 

10 ft/lb - 100 

ft/lb 

1 ft/lb 

120 in/lb16.6 Nm - 

1200 in/lb135.6 Nm 

1 in/lb1 

Nm 

0.960 in 1.240 in 17.750 in 11-982 3.20 lb 

64-544 781412645446 1/2 in 

25 ft/lb - 250 

ft/lb 

1 ft/lb 

300 in/lb33.9 Nm - 

3000 in/lb339 Nm 

1 in/lb1 

Nm 

1.310 in 1.810 in 26.500 in 12-982 4.80 lb 

793


Pre-Set Torque Wrenches 






■■Designed for Repetitive Use in Production Applications 

Especially Where “Inadvertent” Changes to the Wrench Setting 

are to be Avoided 

■■Torque Settings Must Be Pre-Set By Making An Internal 

Adjustment and Using A Torque Tester to Verify the Torque Value 





more Material in High Stress Areas 





■■Rubber Grip Provides Added Comfort in Repetitive Situations 

■■Meets or Exceeds ASME B107.14M 1994 

Cat. No. 

UPC No. 

Drive Tang 

Size 

Primary Scale 



Range - Max 

Torque 

Head 

Thickness 

Head Width 

Overall 

Length 

Ratchet 

Repair Kit 

Repl. Case 

64-221 781412642216 3/8 in 50 in/lb - 250 in/lb 6 Nm - 29 Nm 0.969 in 1.063 in 9.500 in 64-077 64-293 0.76 lb 

64-226 781412642261 3/8 in 10 ft/lb - 100 ft/lb 17 Nm - 139 Nm 1.063 in 1.500 in 17.100 in 64-078 64-295 2.05 lb 

64-236 781412642360 1/2 in 25 ft/lb - 250 ft/lb 43 Nm - 348 Nm 1.438 in 1.750 in 22.500 in 64-092 64-298 2.45 lb 

Product 

Weight 



■■Measures Torque in Both Right and Left Hand Directions 



■■64-720 has a Ball End Handle 

Beam Torque Wrenches 

Cat. No. UPC No. 

Drive Tang 

Size 

Primary Scale 


Primary Scale 

Increments 

Alternate Scale Range - 

Max Torque 

Alt Scale 


64-720 781412647204 1/4 in 0 in/lb - 60 in/lb 2.5 in/lb 0 kg/cm - 70 kg/cm 0.25 kg/cm 11.000 in 0.50 lb 

64-730 781412647303 3/8 in 0 in/lb - 600 in/lb 50 in/lb 0 Nm - 68 Nm 12 Nm 15.000 in 1.39 lb 

64-740 781412647402 1/2 in 0 in/lb - 150 ft/lb 5 ft/lb 0 Nm - 200 Nm 10 Nm 18.300 in 1.50 lb 

794


Dial Torque Wrenches 

■■Assembled in the USA of US and Global Components - Quality 

and Availability 

■■Memory Indicator Pointer Remains at Maximum Torque for 

Positive Verification – Valuable to Determine Breakaway Torque 

■■Oversize Dial Permits Easier Reading 

■■Dual-Faced Dials are Color Coded – Silver for English, Blue for 

Metric – Quick Readings from Any Angle 

■■Strong Corrosion Resistant Housing Offers 

Long-Term Performance 

■■Slim Drive End Allows Easy Access to Tight Spaces 

■■Rubber Handle for Comfortable Grip 




Cat. No. 

UPC No. 

Drive Tang 

Size 

Primary Scale 


Primary Scale 

Increments 


Max Torque 

Alt Scale 


64-302 781412643022 1/4 in 0 in/lb - 75 in/lb 1 in/lb 0 Nm - 8 Nm 0.2 Nm 10.250 in 1.20 lb 

64-352 781412643527 3/8 in 0 in/lb - 250 in/lb 5 in/lb 0 Nm - 27 Nm 0.5 Nm 10.250 in 1.75 lb 

64-355 781412643558 3/8 in 0 in/lb - 600 in/lb 10 in/lb 0 Nm - 66 Nm 2 Nm 12.500 in 2.00 lb 

64-358 781412643589 3/8 in 0 ft/lb - 50 ft/lb 1 ft/lb 0 Nm - 66 Nm 2 Nm 12.500 in 2.00 lb 










■■Dual-Faced Dials Are Color Coded – Silver for English, Blue for 

Metric – Quick Readings From Any Angle 




■■Rubber Handle for Comfortable Grip 





1/2" Drive Dial Torque Wrenches, Ratchet Head 


- Max Torque 

Primary Scale 

Increments 



Alt Scale 



7 


795








Metric – Quick Readings from any Angle 

■■Wire Dial Guard to Protect Dial From Being Impacted 






■■Includes a Blow Mold Case 


3/4" Drive Dial Torque Wrenches with Wire Dial Guard 

Primary Scale Primary Scale Alternate Scale Alt Scale 

Cat. No. UPC No. Drive Tang Size Range - Max Torque Increments Range - Max Torque Increments Overall Length Product Weight 








Metric – Quick Readings from Any Angle 

■■Indicator Light and Buzzer Alerts User When Target Torque is 

Reached, Oversize Dial Permits Easier Reading 

■■64-502 is Equipped with an Extension Handle 

■■64-505 is Equipped with a 4 Piece Extension Handle and 

Equipped with a Topside 1" Square Female Drive for Use with a 

Torque Multiplier to Provide Input Torque 








1" Drive Dial Torque Wrenches, with Electric Light 

Signal Dial 

Primary Scale 


Primary Scale 

Increments 


- Max Torque 

Alt Scale 


64-502 781412645026 1 in 0 ft/lb - 1000 ft/lb 20 ft/lb 0 Nm - 1325 Nm 25 Nm 72.000 in 17.80 lb 

64-505 781412645057 1 in 0 ft/lb - 2000 ft/lb 50 ft/lb 0 Nm - 2650 Nm 50 Nm 11.000 in 43.00 lb 

796



■■Pull Down Lock Collar Allows Easy Setting of Desired Pre-Set 

Torque and Prevents Accidental Change of the Torque Setting 

While in Use 

■■Clutch Type Release Mechanism Prevents Over Torqueing Once 

Preset Torque is Reached 

■■Includes a 1/4" Drive Female Hex Adapter 


■■Calibration Tape is Sent with Each Wrench Which Verifies the 

Accuracy 



1/4" Drive Torque Screwdrivers 

Primary Scale Range - 

Max Torque 

Primary Scale 


64-002 781412640021 1/4 in 20 in/oz - 100 in/oz 2 in/oz 6.800 in 1.41 lb 

64-005 781412640052 1/4 in 6 in/lb - 36 in/lb 0.5 in/lb 6.800 in 1.40 lb 



Documentation of the Actual Calibration of the Torque 

Screwdriver to Include; Model Number, Serial Number, Date, 

Actual Readings, Type of Test Equipment, and Test Equipment 


■■Pull Down Lock Collar Allows Easy Setting of Desired Pre-Set 

Torque and Prevents Accidental Change of the Torque Setting 

While in Use 

■■Clutch Type Release Mechanism Prevents Over Torqueing Once 

Preset Torque is Reached 

■■Includes a 1/4" Drive Female Hex Adapter 



1/4" Drive Certified Torque Screwdrivers 



Max Torque 

Primary Scale 


64-902 781412649024 1/4 in 20 in/oz - 100 in/oz 2 in/oz 6.800 in 0.79 lb 

64-905 781412649055 1/4 in 6 in/lb - 36 in/lb 0.5 in/lb 6.800 in 0.79 lb 

7 


797


■■Changes a 3/8" Square Drive Torque Wrench (Or Ratchet) Into a 

12-Pt. Box End Wrench Configuration 

■■Box End Wall Thickness is Specially Designed to Provide 

Strength While Still Allowing Ample Room for Access to Reach 

Restricted Fasteners 

■■Measure Exactly 2 Inches From Center of Adapter Opening 

(Fastener) to the Center of Square Drive for Easy Torque 

Calculations 

■ ■{Desired Torque to Fastener * Length of Torque Wrench} / 

{Length of Torque Wrench * Adapter Center to Center Distance 

(2")} 

■■This Calculation Assumes that the Attachment is Aligned with 

Torque Wrench Handle When Torqueing Fastener 

■■Meets or Exceeds Aerospace Spec AS954E-2004 

7 Pc. 3/8" Drive 12 Point SAE Torque Wrench 

Adapter Set 

Cat. No. UPC No. Drive Tang Size Product Weight 

64-750 781412647501 3/8 in 0.92 lb 


64-752 3/8" Drive 12 Point SAE Torque Wrench Adapter 3/8" 64-756 3/8" Drive 12 Point SAE Torque Wrench Adapter 5/8" 



64-755 3/8" Drive 12 Point SAE Torque Wrench Adapter 9/16" 


■■Changes a 3/8" Square Drive Torque Wrench (Or Ratchet) Into 

a 12-Pt. Box End Wrench Configuration 



Restricted Fasteners. 

■■Measure Exactly 2 Inches From Center of Adapter 

Opening (Fastener) to the Center of Square Drive for Easy 

Torque Calculations 

■■Formula to Determine Torque Wrench Setting Using a Torque 

Adapter: {Desired Torque to Fastener * Length of Torque Wrench} 

/ {Length of Torque Wrench * Adapter Center to Center 

Distance (2")} 

■■This Calculation Assumes That the Attachment is Aligned with 


4 Pc. 3/8" Drive 12 Point Metric Torque Wrench 

Adapter Set 

Cat. No. UPC No. Drive Tang Size Product Weight 

64-700 781412647006 3/8 in 0.63 lb 


64-710 3/8" Drive 12 Point Metric Torque Wrench Adapter 10MM 64-715 3/8" Drive 12 Point Metric Torque Wrench Adapter 15MM 

64-713 3/8" Drive 12 Point Metric Torque Wrench Adapter 13MM 64-718 3/8" Drive 12 Point Metric Torque Wrench Adapter 18MM 

798


■■Changes a 3/8" Square Drive Torque Wrench (or Ratchet) Into a 

12-Pt. Box End Wrench Configuration 



Restricted Fasteners. 



Calculations 


{Length of Torque Wrench * Adapter Center to Center Distance 

(2")} 

■■This Calculation Assumes that the Attachment is Aligned with 


■■Meets or Exceeds Aerospace Spec AS954E-2004 

3/8" Drive 12 Point SAE Torque Wrench Adapter 

Cat. No. UPC No. Drive Tang Size Fastener Size Overall Length Product Weight 

64-752 781412647525 3/8 in 3/8 in 2.690 in 0.01 lb 

64-753 781412647532 3/8 in 7/16 in 2.750 in 0.11 lb 

64-754 781412647549 3/8 in 1/2 in 2.780 in 0.11 lb 

64-755 781412647556 3/8 in 9/16 in 2.840 in 0.12 lb 

64-756 781412647563 3/8 in 5/8 in 2.880 in 0.13 lb 

64-757 781412647570 3/8 in 11/16 in 2.910 in 0.13 lb 

64-758 781412647587 3/8 in 3/4 in 2.970 in 0.15 lb 

■■Changes a 3/8" Square Drive Torque Wrench (or Ratchet) into 

a 12-Pt. Box End Wrench Configuration 




■■Measure Exactly 2 Inches From Center of Adapter 

Opening (Fastener) to the Center of Square Drive for Easy 

Torque Calculations 


{Length of Torque Wrench * Adapter Center to Center 




3/8" Drive 12 Point Metric Torque Wrench Adapter 


64-710 781412647105 3/8 in 10 mm 2.690 in 0.09 lb 

64-713 781412647136 3/8 in 13 mm 2.780 in 0.11 lb 

64-715 781412647150 3/8 in 15 mm 2.840 in 0.14 lb 

64-718 781412647181 3/8 in 18 mm 2.910 in 0.14 lb 

7 


799


■■Changes a 3/8" Square Drive Torque Wrench (or Ratchet) into 

a Spline Box End Wrench Configuration 






Calculations 


{Length of Torque Wrench * Adapter Center to Center 




■■Meets or Exceeds Military Spec MIL-W-8982, MS-33787 

3/8" Drive 12 Point Spline Torque Wrench Adapter 


64-770 781412647709 3/8 in #7, 7/32 in 2.520 in 0.07 lb 

64-771 781412647716 3/8 in #8, 1/4 in 2.580 in 0.07 lb 

64-772 781412647723 3/8 in #9, 9/32 in 2.580 in 0.08 lb 

64-773 781412647730 3/8 in #10, 5/16 in 2.580 in 0.08 lb 

64-774 781412647747 3/8 in #12, 3/8 in 2.690 in 0.09 lb 

64-775 781412647754 3/8 in #14, 7/16 in 2.750 in 0.11 lb 

64-776 781412647761 3/8 in #16, 1/2 in 2.780 in 0.11 lb 

64-777 781412647778 3/8 in #18, 9/16 in 2.840 in 0.12 lb 

64-778 781412647785 3/8 in #20, 5/8 in 2.880 in 0.13 lb 

64-779 781412647792 3/8 in #22, 11/16 in 2.910 in 0.14 lb 

64-780 781412647808 3/8 in #24, 3/4 in 2.970 in 0.15 lb 



■■Low Input Torque is Required and Can be Applied Easily 

by One Person Using Standard 1/2" Drive Torque Wrenches. 

■■Internal Planetary Gear System Provides Strength and Durability 

Plus an Output Torque Accuracy of +/-5% 

■■The Torque Multiplier with an Impact Socket on the Output 

Square is Placed on the Fastener to be Turned with the Reaction 

Bar Restrained Against Some Substantial Part of the Equipment 

Being Serviced. 

■■Input and Output Rotation Directions Are the Same (If Input 

is Clockwise, Output is Clockwise). Torque Reaction on the 

Reaction Arm is in the Opposite Direction From the 

Input/Output Force 


Cat. No. UPC No. Input Drive 

750 Foot Pound Reaction Bar Torque Multiplier 

Output 

Drive 

Max Input 

(ft.lb.) 

Max Output 

(ft.lb.) 

Gear Ratio 

Torque 

Ratio 

Head 

Width 

Overall 

Length 

Replacement 

Square Drive 

64-830 781412648300 1/2 in 3/4 in 227 ft/lb 750 ft/lb 4.0:1 3.3:1 2.812 in 8.531 in - 4.60 lb 

Product 

Weight 

800







■■Square Drive Shears at 3% to 10% of Overload Torque to 

Protect Against Expensive Internal Damage and the Square Drive 

Can Then be Easily Replaced. 

■■Built in Anti-Backlash Maintains the Multipliers Input Torque 

Allowing the Use of Ratcheting Head Torque Wrench 

■■Built in Angle of Turn Protractor Displays the Output Angle for 

Use on Fasteners Requiring a Specific Angle Rotation After 

Applied Torque. 











1,200 Foot Pound Reaction Bar Torque Multiplier 

Output 

Drive 

Max Input 

(ft.lb.) 

Max Output 

(ft.lb.) 

Gear Ratio 

Torque 

Ratio 

Head 

Width 

Overall 

Length 

Replacement 

Square Drive 

64-832 781412648324 1/2 in 3/4 in 200 ft/lb 1200 ft/lb 6.3:1 6.0:1 3.937 in 14.125 in 64-850 13.00 lb 

Product 

Weight 
















Max Input Max Output 

Overall Replacement Product 

Cat. No. UPC No. Input Drive Output Drive (ft.lb.) (ft.lb.) Gear Ratio Head Width Length Square Drive Weight 

64-833 781412648331 3/4 in 1 in 500 ft/lb 2000 ft/lb 4.27:1 3.800 in 19.500 in - 4.50 lb 

7 


801


























Output 

Drive 

Max Input 

(ft.lb.) 

Max Output 

(ft.lb.) 

Gear Ratio 

Torque 

Ratio 

Head 

Width 

Overall 

Length 

Replacement 

Square Drive 

64-834 781412648348 1/2 in 1 in 162 ft/lb 2200 ft/lb 15.0:1 13.6:1 4.031 in 20.000 in 64-851 20.60 lb 

Product 

Weight 

























Output Max Input Max Output 

Torque Head Overall Replacement Product 

Cat. No. UPC No. Input Drive Drive (ft.lb.) (ft.lb.) Gear Ratio Ratio Width Length Square Drive Weight 

64-836 781412648362 1/2 in 1 in 173 ft/lb 3200 ft/lb 20.2:1 18.5:1 4.031 in 20.000 in 64-852 22.10 lb 

802


Electronic Torque Testers 


■■Torque Testers Are Used to Check the Accuracy of Various 

Types of Torque Wrenches and Screwdrivers Including Pre-Sets 

■■Designed to be Mounted on a Workbench or Wall Allowing 

Operators to Test Wrenches in a Lab or at Their Work Stations; 

Adjustable Display Allows Viewing at Any Angle 

■■Feature Three Modes of Operation: 1) Track Mode (Displays / 

Tracks Torque as it is Being Applied ), 2) Peak Hold (Holds the 

Highest Torque Value), and 3) First Peak (Measures the Value 

When Micrometer Click-Style Wrenches Click; Verifies 

Wrench Accuracy) 

■■Three Way Led Yellow, Green, Red Indicator Lights with Audible 

Buzzer Indicate Under Target (Yellow), at / Within Target 

Tolerance (Green), and Over Target / Tolerance (Red). 

■■Three Units of Measurement (Ft.Lb., On.Lb., N.M.) with a Quick 

Set Target Torque for Go / No Go Prompting 

■■Not for Use with Power or Impact Tools 

■■A Female-To-Female Square Drive Adapter is Included. 


Documentation of the Actual Calibration of the Torque Tester 






Max Torque 


Max Torque Overall Length Product Weight 

64-623 781412646238 1/4 in 5 in/lb - 50 in/lb 5.6 Nm - 56 Nm 6.100 in 6.23 lb 

64-637 781412646375 3/8 in 10 ft/lb - 100 ft/lb 13 Nm - 136 Nm 6.100 in 6.00 lb 



7 


803


Technical Information 

Standard Torque Value Chart 

Fastener 

Type 

Min. Tensile 

Strength 

Material 

Screw Body Size 

Outside Diameter of Fastener (Inch) 

2 3 4 5 6 8 10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 

SAE 0-1-2 74,000 PSI Alloy Steel - - - - - - - 6 12 20 32 47 69 96 155 206 310 

SAE 3 100,000 PSI Medium Carbon Steel - - - - - - - 9 17 30 47 69 103 145 234 372 551 

SAE 5 

SAE 6 

120,000 PSI 

133,000 PSI 

Medium Carbon High 

Treat Steel 

Medium Carbon Steel 

Quenched Tempered 

- - - - - - - 10 19 33 54 78 114 154 257 382 587 

- - - - - - - 12.5 24 43 69 106 150 209 350 550 825 

SAE 7 133,000 PSI Medium Carbon Alloy Steel - - - - - - - 13 25 44 71 110 154 215 360 570 840 

SAE 8 150,000 PSI Medium Carbon Alloy Steel - - - - - - - 14 29 47 78 119 169 230 380 600 900 

Socket Head 

Cap Screw 

Socket Set 

Screw 

Machine Screw 

Yellow Brass 

Silicone Bronze 

Type "B" 

160,000 PSI Alloy Steel - - - - - - - 16 33 54 84 125 180 250 400 640 970 

212,000 PSI Alloy Steel - - - - 9* 16* 30* 70* 140* 18 29 43 63 100 146 

60,000 PSI 

70,000 PSI 

Copper (CU) 63%, Zinc 

(ZN) 37% 

Copper (CU) 96%, Zinc (ZN) 

2%, Silicon (SI) 2% 

2* 3.3* 4.4* 6.4* 8* 16* 20* 65* 110* 17 27 37 49 78 104 160 215 

2.3* 3.7* 4.9* 7.2* 10* 19* 22* 70* 125* 20 30 41 53 88 117 180 250 

Fastener 

Type 

Min. Tensile 

Strength 

Material 

Outside Diameter of Fastener (Inch) 

1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/4 2-1/2 2-3/4 3 

SAE 0-1-2 74,000 PSI Alloy Steel 480 675 900 1100 1470 1900 2360 2750 3450 4400 7350 9500 

SAE 3 100,000 PSI Medium Carbon Steel 872 1211 1624 1943 2660 3463 4695 5427 7226 8049 13450 17548 

SAE 5 

SAE 6 

120,000 PSI 

133,000 PSI 

Medium Carbon High 

Treat Steel 

Medium Carbon Steel 

Quenched Tempered 

794 1105 1500 1775 2425 3150 4200 4550 6550 7175 13000 16000 

1304 1815 2424 2913 3985 5189 6980 7491 10825 14983 20151 26286 


SAE 7 133,000 PSI Medium Carbon Alloy Steel 1325 1825 2500 3000 4000 5300 7000 7500 11000 15500 21000 27000 

SAE 8 150,000 PSI Medium Carbon Alloy Steel 1430 1975 2650 3200 4400 5650 7600 8200 12000 17000 23000 29000 

Socket Head 

Cap Screw 

Socket Set 

Screw 

Machine Screw 

Yellow Brass 

Silicone Bronze 

Type "B" 

160,000 PSI Alloy Steel 1520 2130 2850 3450 4700 6100 8200 8800 13000 18000 24000 31000 

212,000 PSI Alloy Steel - - - - - - - - - - - - 

60,000 PSI 

70,000 PSI 

Copper (CU) 63%, Zinc 

(ZN) 37% 

Copper (CU) 96%, Zinc (ZN) 

2%, Silicon (SI) 2% 

STUDS : Use SAE 2, 5 or 8 values when grade is known, with a nut of sufficient strength. 

325 400 - 595 - - - - - - - - 

365 450 - 655 - - - - - - - - 

There is no difference in the above chart between the torque figures for fine or coarse threads. The torque figures for a finely-threaded fastener as compared 

to a coarsely-threaded fastener of the same diameter may be slightly higher but not significant enough to note. 

SAFETY NOTICE : THERE ARE MANY VARYING FACTORS WHICH AFFECT TORQUE. THE FIGURES IN THIS CHART ARE SAFE FIGURES FOR STANDARD 

TORQUE APPLICATIONS ONLY. 

804


Torque Conversion Charts 

In the International Metric System, there is a term for “force” called the “Newton,” which is defined as “the force necessary to move one kilogram one 

meter per second.” Therefore, with torque being “Force X Length,” the International Metric System measure torque in “Newton meters” (Nm). 

From ft∙lb to Nm [ft∙lb x 1.3558 = Nm] 

ft∙lb 0 Nm 1 Nm 2 Nm 3 Nm 4 Nm 5 Nm 6 Nm 7 Nm 8 Nm 9 Nm 

0 0 1.36 2.71 4.07 5.42 6.78 8.13 9.49 10.84 12.2 

10 13.56 14.91 16.27 17.62 18.98 20.33 21.69 23.05 24.4 25.76 

20 27.11 28.47 29.83 31.18 32.54 33.89 35.25 36.61 37.97 39.32 

30 40.67 42.02 43.38 44.73 46.09 47.45 48.8 50.16 51.51 52.87 

40 54.22 55.58 56.94 58.29 59.65 61 62.36 63.71 65.07 66.42 

50 67.78 69.14 70.49 71.85 73.2 74.56 75.91 77.27 78.62 79.98 

60 81.33 82.69 84.05 85.4 86.76 88.11 89.47 90.83 92.18 93.54 

70 94.89 96.25 97.6 98.96 100.31 101.67 103.03 104.38 105.74 107.09 

80 108.45 109.8 111.16 112.51 113.87 115.23 116.58 117.94 119.29 120.65 

90 122 123.36 124.72 126.07 127.43 128.78 130.14 131.49 132.85 134.2 

100 135.56 

From Nm to ft∙lb [1 Nm = 0.73756 ft∙lb] 

Nm 0 ft∙lb 1 ft∙lb 2 ft∙lb 3 ft∙lb 4 ft∙lb 5 ft∙lb 6 ft∙lb 7 ft∙lb 8 ft∙lb 9 ft∙lb 

0 0 0.74 1.48 2.21 2.95 3.69 4.43 5.16 5.9 6.64 

10 7.38 8.11 8.85 9.59 10.33 11.06 11.8 12.54 13.28 14.01 

20 14.75 15.49 16.23 16.96 17.7 18.44 19.18 19.91 20.65 21.39 

30 22.13 22.86 23.6 24.34 25.08 25.81 26.55 27.99 28.03 28.76 

40 29.5 30.24 30.98 31.72 32.45 33.19 33.93 34.67 35.4 36.14 

50 36.88 37.62 38.35 39.09 39.83 40.57 41.3 42.04 42.78 43.52 

60 44.25 44.99 45.73 46.47 47.2 47.94 48.68 49.42 50.15 50.89 

70 51.63 52.37 53.1 53.84 54.58 55.32 56.05 56.79 57.53 58.27 

80 59 59.74 60.48 61.22 61.96 62.69 63.43 64.17 64.91 65.64 

90 66.38 67.12 67.86 68.59 69.33 70.07 70.81 71.54 72.28 73.02 

100 73.76 

From in∙lb to Nm [in∙lb x 0.1130 = Nm] 

in∙lb 0 Nm 1 Nm 2 Nm 3 Nm 4 Nm 5 Nm 6 Nm 7 Nm 8 Nm 9 Nm 

0 0 0.113 0.226 0.339 0.452 0.565 0.678 0.791 0.904 1.02 

10 1.13 1.24 1.36 1.47 1.58 1.7 1.81 1.92 2.03 2.15 

20 2.26 2.37 2.49 2.6 2.71 2.83 2.94 3.05 3.16 3.28 

30 3.39 3.5 3.62 3.73 3.84 3.96 4.07 4.18 4.29 4.41 

40 4.52 4.63 4.75 4.86 4.97 5.09 5.2 5.31 5.42 5.54 

50 5.65 5.76 5.88 5.99 6.1 6.22 6.33 6.44 6.55 6.67 

60 6.78 6.89 7.01 7.12 7.23 7.35 7.46 7.57 7.68 7.8 

70 7.91 8.02 8.14 8.25 8.36 8.48 8.59 8.7 8.81 8.93 

80 9.04 9.15 9.27 9.38 9.49 9.61 9.72 9.83 9.94 10.06 

90 10.17 10.28 10.4 10.51 10.62 10.74 10.85 10.96 11.07 11.19 

100 11.3 

From Nm to in∙lb [Nm X 8.8507 = in∙lb] 

Nm 0 in∙lb 1 in∙lb 2 in∙lb 3 in∙lb 4 in∙lb 5 in∙lb 6 in∙lb 7 in∙lb 8 in∙lb 9 in∙lb 

0 0 8.85 17.7 26.55 35.4 44.25 53.1 61.95 70.81 79.66 

10 88.51 97.36 106.21 115.06 123.91 132.76 141.61 150.46 159.31 168.16 

20 177.01 185.86 194.72 203.57 212.42 221.27 230.12 238.98 247.82 256.67 

30 265.52 274.38 283.22 292.07 300.92 309.77 318.62 327.48 336.33 345.18 

40 354.03 362.88 371.73 380.58 389.43 398.28 407.13 415.98 424.83 433.68 

50 442.53 451.36 460.24 469.09 477.94 486.79 495.64 504.49 513.34 522.19 

60 531.04 539.89 548.74 557.59 566.44 575.3 584.15 592.1 601.85 610.7 

70 619.55 628.4 637.25 646.1 654.95 663.8 672.65 681.5 690.35 699.2 

80 708.06 716.91 725.76 734.61 743.46 752.31 761.16 770.01 778.86 787.71 

90 796.56 805.41 814.26 823.12 831.97 840.82 849.67 858.52 867.37 876.22 

100 885.07 

From in∙oz to Nm [in∙oz x 0.00706 = Nm] 

in∙oz 0 Nm 1 Nm 2 Nm 3 Nm 4 Nm 5 Nm 6 Nm 7 Nm 8 Nm 9 Nm 

0 0 0.007 0.014 0.021 0.028 0.035 0.042 0.049 0.056 0.064 

10 0.071 0.078 0.085 0.092 0.098 0.106 0.113 0.12 0.127 0.134 

20 0.141 0.148 0.155 0.162 0.169 0.177 0.184 0.191 0.198 0.205 

30 0.212 0.219 0.226 0.232 0.24 0.247 0.254 0.261 0.268 0.275 

40 0.282 0.289 0.297 0.304 0.312 0.318 0.325 0.332 0.339 0.346 

50 0.353 0.36 0.367 0.374 0.381 0.388 0.395 0.402 0.409 0.417 

60 0.424 0.431 0.438 0.445 0.452 0.459 0.466 0.473 0.48 0.487 

70 0.494 0.501 0.508 0.515 0.522 0.53 0.537 0.544 0.551 0.558 

80 0.565 0.572 0.579 0.586 0.593 0.6 0.607 0.624 0.621 0.628 

90 0.635 0.642 0.65 0.657 0.664 0.671 0.678 0.685 0.692 0.699 

100 0.706 

From m∙kg to Nm [m∙kg (or m∙kp) = 9.80665 Nm] 

m∙kg 0 Nm 1 Nm 2 Nm 3 Nm 4 Nm 5 Nm 6 Nm 7 Nm 8 Nm 9 Nm 

0 0 9.81 19.61 29.42 39.23 49.03 58.84 68.65 78.45 88.26 

10 98.07 107.87 117.68 127.49 137.3 147.1 156.9 166.71 176.52 186.33 

20 196.13 205.94 215.75 225.55 235.36 245.17 254.98 264.78 274.59 284.4 

30 294.2 304 313.81 323.62 333.43 343.23 353.04 362.85 372.65 382.46 

40 392.27 402.07 411.88 421.69 431.49 441.3 451.11 460.91 470.72 480.53 

50 490.33 500.14 509.95 519.75 529.56 539.37 549.17 558.98 568.79 578.6 

60 588.4 598.21 608.01 617.82 627.63 637.43 647.24 657.05 666.86 676.66 

70 686.47 696.27 706.08 715.89 725.7 735.5 745.3 755.11 764.92 774.73 

80 784.53 794.34 804.15 813.95 823.76 833.57 843.37 853.18 862.99 872.79 

90 882.6 892.41 902.21 912.02 921.83 931.63 941.44 951.25 961.05 970.86 

100 980.67 

From Nm to in∙oz [0.01 Nm x 141.6112 = 0.01 in∙oz] 

Nm 0 in∙oz 1 in∙oz 2 in∙oz 3 in∙oz 4 in∙oz 5 in∙oz 6 in∙oz 7 in∙oz 8 in∙oz 9 in∙oz 

0 0 1.42 2.83 4.25 5.66 7.08 8.5 9.91 11.33 12.74 

0.1 14.16 15.58 16.99 18.41 19.83 21.24 22.66 24.07 25.49 26.91 

0.2 28.32 29.74 31.15 32.57 33.99 35.4 36.82 38.23 39.65 41.07 

0.3 42.48 43.9 45.32 46.73 48.15 49.56 50.98 52.4 53.81 55.23 

0.4 56.64 58.06 59.48 60.89 62.31 63.72 65.14 66.56 67.97 69.39 

0.5 70.81 72.22 73.64 75.05 76.47 77.89 79.3 80.72 82.13 83.55 

0.6 84.97 86.41 87.8 89.21 90.63 92.05 93.46 94.88 96.3 97.71 

0.7 99.13 100.54 101.96 103.38 104.79 106.21 107.62 109.04 110.46 111.87 

0.8 113.29 114.7 116.12 117.54 118.95 120.37 121.79 123.2 124.62 126.03 

0.9 127.45 128.87 130.28 131.7 133.11 134.53 135.95 137.36 138.78 140.19 

1.0 141.61 

From Nm to m∙kg [Nm x 0.10197 = m∙kg (or m∙kp)] 

Nm 0 m∙kg 1 m∙kg 2 m∙kg 3 m∙kg 4 m∙kg 5 m∙kg 6 m∙kg 7 m∙kg 8 m∙kg 9 m∙kg 

0 0 0.102 0.204 0.306 0.408 0.51 0.611 0.714 0.816 0.918 

10 1.02 1.122 1.224 1.326 1.428 1.53 1.632 1.733 1.835 1.937 

20 2.039 2.141 2.243 2.345 2.447 2.549 2.651 2.753 2.855 2.957 

30 3.059 3.161 3.263 3.365 3.467 3.569 3.671 3.773 3.875 3.977 

40 4.079 4.181 4.283 4.385 4.487 4.589 4.691 4.793 4.895 4.997 

50 5.099 5.2 5.302 5.404 5.506 5.608 5.71 5.812 5.914 6.016 

60 6.118 6.22 6.322 6.424 6.526 6.628 6.73 6.832 6.934 7.036 

70 7.138 7.24 7.342 7.444 7.546 7.648 7.75 7.852 7.954 8.056 

80 8.158 8.26 8.362 8.464 8.565 8.667 8.769 8.871 8.973 9.075 

90 9.177 9.279 9.381 9.483 9.585 9.687 9.789 9.891 9.993 10.095 

100 10.197 

7 


805


NOTE: a meter kilogram is equal to a meter kilopond. (1m∙kg = 1m∙kp) 

From in∙lb to in∙oz [in∙lb x 16 = in∙oz] 

in∙lb 0 in∙oz 1 in∙oz 2 in∙oz 3 in∙oz 4 in∙oz 5 in∙oz 6 in∙oz 7 in∙oz 8 in∙oz 9 in∙oz 

0 0 16 32 48 64 80 96 112 128 144 

10 160 176 192 208 224 240 256 272 288 304 

20 320 336 352 368 384 400 416 432 448 464 

30 480 496 512 528 544 560 576 592 608 624 

40 640 656 672 688 704 720 736 752 768 784 

50 800 816 832 848 864 880 896 912 928 944 

60 960 976 992 1008 1024 1040 1056 1072 1088 1104 

70 1120 1236 1152 1168 1184 1200 1216 1232 1248 1264 

80 1280 1296 1312 1328 1344 1360 1376 1392 1408 1424 

90 1440 1456 1472 1488 1504 1520 1536 1552 1568 1584 

100 1600 

From in∙oz to in∙lb [in∙oz ÷ 16 = in∙lb] 

in∙oz 0 in∙lb 1 in∙lb 2 in∙lb 3 in∙lb 4 in∙lb 5 in∙lb 6 in∙lb 7 in∙lb 8 in∙lb 9 in∙lb 

0 0 0.063 0.125 0.188 0.250 0.313 0.375 0.438 0.500 0.563 

10 0.625 0.688 0.750 0.813 0.875 0.938 1.000 1.063 1.125 1.188 

20 1.250 1.313 1.375 1.438 1.500 1.563 1.625 1.688 1.750 1.813 

30 1.875 1.938 2.000 2.063 2.125 2.188 2.250 2.313 2.375 2.438 

40 2.500 2.563 2.625 2.688 2.750 2.813 2.875 2.938 3.000 3.063 

50 3.125 3.188 3.250 3.313 3.375 3.438 3.500 3.563 3.625 3.688 

60 3.750 3.813 3.875 3.938 4.000 4.063 4.125 4.188 4.250 4.313 

70 4.375 4.438 4.500 4.563 4.625 4.688 4.750 4.813 4.875 4.938 

80 5.000 5.063 5.125 5.188 5.250 5.313 5.375 5.438 5.500 5.563 

90 5.625 5.688 5.750 5.813 5.875 5.938 6.000 6.063 6.125 6.188 

100 6.250 

From ft∙lb to in∙lb [ft∙lb x 12 = in∙lb] 

ft∙lb 0 in∙lb 1 in∙lb 2 in∙lb 3 in∙lb 4 in∙lb 5 in∙lb 6 in∙lb 7 in∙lb 8 in∙lb 9 in∙lb 

0 0 12 24 36 48 60 72 84 96 108 

10 120 132 144 156 168 180 192 204 216 228 

20 240 252 264 276 288 300 312 324 336 348 

30 360 372 384 396 408 420 432 444 456 468 

40 480 492 504 516 528 540 552 564 576 588 

50 600 612 624 636 648 660 672 684 696 708 

60 720 732 744 756 768 780 792 804 816 828 

70 840 852 864 876 888 900 912 924 936 948 

80 960 972 984 996 1008 1020 1032 1044 1056 1068 

90 1080 1092 1104 1116 1128 1140 1152 1164 1176 1188 

100 1200 

From in∙lb to ft∙lb [in∙lb ÷ 12 = ft∙lb] 

in∙lb 0 ft∙lb 1 ft∙lb 2 ft∙lb 3 ft∙lb 4 ft∙lb 5 ft∙lb 6 ft∙lb 7 ft∙lb 8 ft∙lb 9 ft∙lb 

0 0.000 0.083 0.167 0.250 0.333 0.417 0.500 0.583 0.667 0.750 

10 0.833 0.917 1.000 1.083 1.167 1.250 1.333 1.417 1.500 1.583 

20 1.667 1.750 1.833 1.917 2.000 2.083 2.167 2.250 2.333 2.417 

30 2.500 2.583 2.667 2.750 2.833 2.917 3.000 3.083 3.167 3.250 

40 3.333 3.417 3.500 3.583 3.667 3.750 3.833 3.917 4.000 4.083 

50 4.167 4.250 4.333 4.417 4.500 4.583 4.667 4.750 4.833 4.917 

60 5.000 5.083 5.167 5.250 5.333 5.417 5.500 5.583 5.667 5.750 

70 5.833 5.917 6.000 6.083 6.167 6.250 6.333 6.417 6.500 6.583 

80 6.667 6.750 6.833 6.917 7.000 7.083 7.167 7.250 7.333 7.417 

90 7.500 7.583 7.667 7.750 7.833 7.917 8.000 8.083 8.167 8.250 

100 8.333 


in∙lb 

0 

cm∙kg 

1 

cm∙kg 

From in∙lb to cm∙kg [in∙lb x 1.152 = cm∙kg] 

2 

cm∙kg 

3 

cm∙kg 

4 

cm∙kg 

5 

cm∙kg 

6 

cm∙kg 

7 

cm∙kg 

8 

cm∙kg 

9 

cm∙kg 

0 0.00 1.15 2.30 3.46 4.61 5.76 6.91 8.06 9.22 10.36 

10 11.52 12.67 13.83 14.97 16.13 17.28 18.43 19.59 20.74 21.89 

20 23.04 24.19 25.35 26.49 27.65 28.80 29.96 31.07 32.26 33.41 

30 34.56 35.71 36.87 38.02 39.17 40.32 41.47 42.62 43.77 44.93 

40 46.09 47.23 48.39 49.54 50.69 51.85 52.99 54.14 55.29 56.45 

50 57.61 58.75 59.90 61.06 62.21 63.37 64.51 65.66 66.81 67.96 

60 69.13 70.27 71.42 72.57 73.73 74.89 76.03 77.18 78.33 79.49 

70 80.65 81.79 82.94 84.05 85.21 86.41 87.58 88.75 89.91 91.00 

80 92.17 93.32 94.49 95.66 96.83 97.93 99.08 100.20 101.40 102.60 

90 103.70 104.90 106.10 107.20 108.30 109.50 110.70 111.80 112.90 114.10 

100 115.20 

From ft∙lb to m∙kg [ft∙lb x 0.1383 = m∙kg (or m∙kp)] 

ft∙lb 0 m∙kg 1 m∙kg 2 m∙kg 3 m∙kg 4 m∙kg 5 m∙kg 6 m∙kg 7 m∙kg 8 m∙kg 9 m∙kg 

0 0 0.138 0.276 0.415 0.553 0.691 0.83 0.968 1.106 1.245 

10 1.383 1.521 1.66 1.798 1.936 2.074 2.212 2.351 2.489 2.628 

20 2.766 2.904 3.043 3.181 3.319 3.457 3.596 3.734 3.872 4.011 

30 4.149 4.287 4.426 4.564 4.702 4.84 4.979 5.117 5.255 5.394 

40 5.532 5.67 5.809 5.947 6.085 6.223 6.362 6.50 6.638 6.777 

50 6.915 7.053 7.191 7.33 7.468 7.606 7.745 7.883 8.021 8.159 

60 8.298 8.436 8.574 8.713 8.851 8.989 9.128 9.266 9.404 9.543 

70 9.681 9.819 9.957 10.09 10.23 10.37 10.51 10.65 10.79 10.92 

80 11.06 11.20 11.34 11.48 11.62 11.75 11.89 12.03 12.17 12.31 

90 12.45 12.59 12.73 12.86 13.00 13.14 13.28 13.42 13.55 13.69 

100 13.83 

From cm∙kg to in∙lb [cm∙kg x 0.8677 = in∙lb] 

cm∙kg 0 In∙lb 1 In∙lb 2 In∙lb 3 In∙lb 4 In∙lb 5 In∙lb 6 In∙lb 7 In∙lb 8 In∙lb 9 In∙lb 

0 0 0.868 1.735 2.603 3.471 4.339 5.206 6.074 6.942 7.809 

10 8.677 9.545 10.412 11.28 12.148 13.016 13.883 14.751 15.619 16.486 

20 17.354 18.222 19.089 19.957 20.825 21.693 22.56 23.428 24.296 25.163 

30 26.031 26.899 27.766 28.634 29.502 30.370 31.237 32.105 32.973 33.84 

40 34.708 35.576 36.443 37.311 38.179 39.047 39.914 40.782 41.650 42.517 

50 43.385 44.253 45.120 45.988 46.856 47.724 48.591 49.459 50.327 51.194 

60 52.062 52.93 53.797 54.665 55.533 56.401 57.268 58.136 59.004 59.871 

70 60.739 61.607 62.474 63.342 64.01 65.078 65.945 66.813 67.681 68.548 

80 69.416 70.284 71.151 72.019 72.887 73.754 74.622 75.490 76.358 77.225 

90 78.093 78.961 79.828 80.67 81.564 82.432 83.299 84.167 85.035 85.902 

100 86.770 

From m∙kg to ft∙lb [m∙kg x 7.233 = ft∙lb] 

in∙oz 0 Nm 1 Nm 2 Nm 3 Nm 4 Nm 5 Nm 6 Nm 7 Nm 8 Nm 9 Nm 

0 0.00 7.23 14.47 21.70 28.93 36.17 43.40 50.63 57.86 65.10 

10 72.40 79.60 86.80 94.00 101.30 108.50 115.70 123.00 130.20 137.40 

20 144.70 151.90 159.10 166.40 173.60 180.80 188.10 195.30 202.50 209.80 

30 217.00 224.20 231.50 238.70 245.90 253.20 260.40 267.60 274.90 284.10 

40 289.30 296.60 303.90 311.00 318.30 325.50 332.70 340.00 347.20 354.40 

50 361.70 368.90 376.10 383.30 390.60 397.80 405.00 412.30 419.50 426.70 

60 434.00 441.20 448.40 455.70 462.90 470.10 477.40 484.60 491.80 499.10 

70 506.30 513.50 520.80 528.00 535.20 542.50 549.70 556.90 564.20 571.40 

80 578.60 585.90 593.10 600.30 607.60 614.80 622.00 629.30 636.50 643.70 

90 651.00 658.20 665.40 672.70 679.90 687.10 694.40 701.60 708.80 716.10 

100 723.30 

806

S C R E W D R I V E R S 

Dual Material Screwdrivers.............. 810 

Mini Screwdrivers............................. 816 

Solid Handle Screwdrivers................ 818 

Insulated Screwdrivers..................... 820 

Ratcheting Screwdrivers................... 821 

Screwdriver Bit Sets.......................... 824 

Offset Screwdrivers........................... 826 

Screw Starters................................... 826 

Ratcheting Nutdrivers....................... 827 

Cushion Grip Nutdrivers.................... 829 


Electrician’s Screwdrivers................ 832 

Solid Handle Screwdrivers................ 836 

Ratcheting Screwdrivers................... 848 

Offset Screwdrivers........................... 848 

Screw Starters & Nut Starters.......... 849 

Hollow Shaft Nutdrivers.................... 850 

Solid Shaft Nutdrivers....................... 852 

T-Handle Nutdrivers.......................... 855 

8 


Bit Screwdrivers................................ 861 

Cushion Grip Screwdrivers............... 861 

Precision Screwdrivers..................... 865 

Pocket Screwdrivers......................... 866 

Dual Material Nutdrivers................... 866 


807


Screwdrivers 

GearWrench ® screwdrivers are ergonomically designed to fit your hand when in use. Developed in conjunction with a leading university, 

the Tri-lobe handle shape offers three sides that provide the best performance with the least amount of effort. A full range of tips and 

sizes are available in both a Dual Material Comfort Grip and solid Acetate versions. GearWrench ® screwdrivers are available individually 

or in sets. 

DUAL MATERIAL 

SCREWDRIVERS 

Black Oxide Non-Slip Tip 

Laser etched part 

number and size 

Tri-Lobe ergonomic handle 

to obtain optimal balance 

of strength and comfort 

Nut bolster on 

selected sizes 

“Speed Zone” for turning 

in lower torque applications 

S C R E W D R I V E R S 8 

SOLID HANDLE 

SCREWDRIVERS 

Black Oxide Non-Slip Tip 

Innovative dual material handle for 

comfort and performance 

Oil and solvent resistant 



Solid impact resistant acetate 

handle for uncompromising 

durability 


to obtain optimal balance of 

strength and comfort 

808


Screwdrivers 

Armstrong ® offers a wide variety of professional screwdrivers and nut drivers for just about any application. All Armstrong screwdrivers 

are made to exacting standards with ASME and Federal Spec callouts where applicable. They also incorporate professional quality 

features. All handles are designed to maximize turning power and comfort, while all tips are designed to maximize grip to the fastener. 

In addition, superior design, materials, and heat treat optimize durability and strength. Available individually or in a selection of sets, 

these precision made tools can handle just about any screw or nut turning application. 

SOLID HANDLE 

SCREWDRIVERS 




to obtain optimal balance 

of strength and comfort 

Precision machined, blasted tips provide superior fit between 

the tip and the fastener reducing slippage and fastener wear as 

well as eliminating chrome peel 

Available in square or round shaft; 

Slotted, Phillips, Cabinet or Torx ® tips 

Full shaft heat treat provides 

superior strength that resists 

tip wear and shank twisting / 

breakage 

Solid impact resistant acetate 

handle for uncompromising 

durability 

Domed handle for comfortably 

applying added pressure 

DUAL MATERIAL 

SCREWDRIVERS 

Screwdrivers 

Crescent ® recently introduced a new line of screwdrivers that offer the greatest value for the price. Dual material comfort grips complement 

a precision ground blade to offer durability and performance. The line has a complete product offering including Phillips ® , slotted, 

nut drivers, and Torx ® . 

Chrome plated blade provides corrosion resistance 

and easy cleaning - Sizes laser etched on blade 

Dual material handle is designed for 

improved comfort and performance 

8 


Black Oxide tip for strong and durable construction 

with blasted tip to reduce slippage 

809


■■Black Oxide Non-Slip Tip 

■■Laser Etched Part Number and Size 

■■Innovative Dual Material Handle for Comfort and Performance 

■■Oil and Solvent Resistant 

■■Tri-Lobe Ergonomic Handle to Obtain Optimal Balance 

of Strength and Comfort 

■ ■"Speed Zone" for Turning in Lower Torque Applications 


20 Pc. Master Dual Material Screwdriver Set 


80066 099575800665 Carded 4.51 lb 1 


80031 Dual Material Phillips® Screwdriver #00 x 60 mm 80035 Dual Material Slotted Screwdriver 2.0mm x 60 mm 


80033 Dual Material Phillips® Screwdriver #1 x 60 mm 80018D Dual Material Slotted Screwdriver 3/16 x 6" 

80000 Dual Material Phillips® Screwdriver #0 x 2-1/2" 80012D Dual Material Slotted Screwdriver 1/4 x 1-1/2" 

80001 Dual Material Phillips® Screwdriver #1 x 3" 80013 Dual Material Slotted Screwdriver 1/4 x 4" 


80005 Dual Material Phillips® Screwdriver #2 x 1-1/2" 80023 Dual Material Slotted Screwdriver 5/16 x 6" 


80011 Dual Material Phillips® Screwdriver #3 x 6" 80025 Dual Material Torx® Screwdriver T-15 x 4" 

80034 Dual Material Slotted Screwdriver 1.5mm x 60 mm 80026D Dual Material Torx® Screwdriver T-20 x 4" 










12 Pc. Combination Dual Material Screwdriver Set 


80051 099575800511 Carded 3.39 lb 1 


80000 Dual Material Phillips® Screwdriver #0 x 2-1/2" 80018D Dual Material Slotted Screwdriver 3/16 x 6" 

80001 Dual Material Phillips® Screwdriver #1 x 3" 80012D Dual Material Slotted Screwdriver 1/4 x 1-1/2" 


80005 Dual Material Phillips® Screwdriver #2 x 1-1/2" 80014 Dual Material Slotted Screwdriver 1/4 x 6" 



810










10 Pc. Combination and Pozidriv® Dual Material 

Screwdriver Set 


80060 099575800603 Carded 2.20 lb 1 


80001 Dual Material Phillips® Screwdriver #1 x 3" 80046 Dual Material Pozidriv® Screwdriver #3 x 6" 


80043 Dual Material Pozidriv® Screwdriver #0 x 2-1/2" 80017 Dual Material Slotted Screwdriver 3/16 x 4" 

80044 Dual Material Pozidriv® Screwdriver #1 x 3" 80013 Dual Material Slotted Screwdriver 1/4 x 4" 

80045 Dual Material Pozidriv® Screwdriver #2 x 4" 80023 Dual Material Slotted Screwdriver 5/16 x 6" 










8 


80050 099575800504 Carded 1.67 lb 1 




80015 Dual Material Slotted Screwdriver 1/8 x 3" 80022 Dual Material Slotted Screwdriver 3/8 x 8" 


811










5 Pc. Slotted Dual Material Screwdriver Set 


80053 099575800535 Carded 1.55 lb 1 













5 Pc. Phillips Dual Material Screwdriver Set 



80052 099575800528 Carded 1.61 lb 1 


80000 Dual Material Phillips® Screwdriver #0 x 2-1/2" 80010D Dual Material Phillips® Screwdriver #2 x 8" 

80001 Dual Material Phillips® Screwdriver #1 x 3" 80011 Dual Material Phillips® Screwdriver #3 x 6" 









4 Pc. Long Combination Dual Material 



80059 099575800597 Carded 2.00 lb 1 



80020D Dual Material Slotted Screwdriver 3/8 x 12" 80019D Dual Material Slotted Screwdriver 3/16 x 10" 

812










7 Pc. Torx® Dual Material Screwdriver Set 


80054 099575800542 Carded 1.81 lb 1 


80024D Dual Material Torx® Screwdriver T-10 x 4" 80028D Dual Material Torx® Screwdriver T-27 x 4" 

80025 Dual Material Torx® Screwdriver T-15 x 4" 80029 Dual Material Torx® Screwdriver T-30 x 4" 

80026D Dual Material Torx® Screwdriver T-20 x 4" 80030D Dual Material Torx® Screwdriver T-40 x 4" 

80027 Dual Material Torx® Screwdriver T-25 x 4" 





■■Tri-Lobe Ergonomic Handle to Obtain Optimal Balance of 

Strength and Comfort 


3 Pc. Long Torx® Dual Material Screwdriver Set 

8 


80064 099575800641 Carded 3.20 lb 1 


80086 Dual Material Torx® Screwdriver T-15 x 18" 80088 Dual Material Torx® Screwdriver T-25 x 18" 

80087 Dual Material Torx® Screwdriver T-20 x 18" 









4 Pc. Pozidriv® Dual Material Screwdriver Set 



80061 099575800610 Carded 1.95 lb 1 


80043 Dual Material Pozidriv® Screwdriver #0 x 2-1/2" 80045 Dual Material Pozidriv® Screwdriver #2 x 4" 

80044 Dual Material Pozidriv® Screwdriver #1 x 3" 80046 Dual Material Pozidriv® Screwdriver #3 x 6" 

813










4 Pc. Square Dual Material Screwdriver Set 


80065 099575800658 Carded 1.80 lb 1 


80089 Dual Material Square Screwdriver #0 x 4" 80091 Dual Material Square Screwdriver #2 x 4" 

80090 Dual Material Square Screwdriver #1 x 4" 80092 Dual Material Square Screwdriver #3 x 5" 

■■Tri-Lobe Ergonomic Handle to Offer Optimal Balance Power and 

Comfort 

■■Dual Material Handle for Comfort and Performance 



■■Magnetic Tip 


Dual Material Screwdrivers - Slotted 



Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 

(Dia. X Length) 

80015 099575800153 Carded 0.022 in 1/8 in 4 in 0.117 in 6.227 in 0.89 in x 3.22 in 0.08 lb 1 


80018D 099575800184 Carded 0.033 in 3/16 in 6 in 0.196 in 10.050 in 1.16 in x 4.15 in 0.21 lb 1 


80012D 099575800122 Carded 0.04 in 1/4 in 1.5 in 0.236 in 4.101 in 1.31 in x 4.61 in 0.12 lb 1 







Product 

Weight 

Shelf Pack 

Qty. 

814



Comfort 






Cat. No. UPC No. Packaging Tip Size Blade Length 

Dual Material Screwdrivers - Phillips 

Blade 

Diameter 


Handle Size 


80000 099575800009 Carded #0 2-1/2 in 0.118 in 5.768 in 0.91 in x 3.26 in 0.07 lb 1 

80001 099575800016 Carded #1 3 in 0.196 in 7.127 in 1.17 in x 4.15 in 0.15 lb 1 





80010D 099575800108 Carded #2 8 in 0.235 in 12.500 in 1.28 in x 4.62 in 0.28 lb 1 



Product 

Weight 

Shelf Pack 

Qty. 


Comfort 






Dual Material Screwdrivers - Torx® 

8 


Blade 

Diameter 


Handle Size 


80024D 099575800245 Carded T10 4 in 0.196 in 8.100 in 1.15 in x 4.14 in 0.16 lb 1 

80025 099575800252 Carded T15 4 in 0.196 in 8.100 in 1.16 in x 4.14 in 0.16 lb 1 








Product 

Weight 

Shelf Pack 

Qty. 


815



Comfort 







Dual Material Screwdrivers - Pozidriv® 

Blade 

Diameter 


Handle Size 






Product 

Weight 

Shelf Pack 

Qty. 


Comfort 






Dual Material Screwdrivers - Square 



Blade 

Diameter 


Handle Size 






■■Cap Color Indicates Tip Style 




■■Tri-Lobe Ergonomic Handle to Offer Optimal Balance Power 

and Comfort 

12 Pc. Combination Mini Dual Material 


Product 

Weight 


80057 099575800573 Carded 1.17 lb 1 

Shelf Pack 

Qty. 


80031 Dual Material Phillips® Screwdriver #00 x 60 mm 80037 Dual Material Torx® Screwdriver T-5 x 60 mm 



80034 Dual Material Slotted Screwdriver 1.5mm x 60 mm 80040 Dual Material Torx® Screwdriver T-8 x 60 mm 

80035 Dual Material Slotted Screwdriver 2.0mm x 60 mm 80041 Dual Material Torx® Screwdriver T-9 x 60 mm 

80036 Dual Material Slotted Screwdriver 2.5mm x 60 mm 80042D Dual Material Torx® Screwdriver T-10 x 60 mm 

816







Comfort 

6 Pc. Mini Dual Material Screwdriver Set 


80055 099575800559 Carded 0.84 lb 1 










and Comfort 

6 Pc. Mini Torx® Dual Material Screwdriver Set 


80056 099575800566 Carded 0.84 lb 1 

8 


80037 Dual Material Torx® Screwdriver T-5 x 60 mm 80040 Dual Material Torx® Screwdriver T-8 x 60 mm 

80038 Dual Material Torx® Screwdriver T-6 x 60 mm 80041 Dual Material Torx® Screwdriver T-9 x 60 mm 

80039 Dual Material Torx® Screwdriver T-7 x 60 mm 80042D Dual Material Torx® Screwdriver T-10 x 60 mm 


and Comfort 






Mini Dual Material Screwdrivers - Slotted 

Blade 

Diameter 


Handle Size 


80034 099575800344 Carded 1.5mm 60 mm 0.097 in 6.110 in 0.75 in x 3.71 in 0.06 lb 1 



Product 

Weight 

Shelf Pack 

Qty. 


817



and Comfort 






Mini Dual Material Screwdrivers - Phillips 

Blade 

Diameter 


Handle Size 


80031 099575800313 Carded #00 60 mm 0.098 in 6.116 in 0.74 in x 3.70 in 0.06 lb 1 



Product 

Weight 

Shelf Pack 

Qty. 


and Comfort 





Mini Dual Material Screwdrivers - Torx® 



Blade 

Diameter 


Handle Size 


80037 099575800375 Carded T5 60 mm 0.098 in 6.084 in 0.75 in x 3.71 in 0.06 lb 1 





80042D 099575804205 Carded T10 60 mm 0.117 in 6.083 in 0.75 in x 3.71 in 0.06 lb 1 


■■Solid 100% Impact Resistant Acetate Handle 





Product 

Weight 

Shelf Pack 

Qty. 

8 Pc. Combination Solid Handle Screwdriver Set 


82734 099575827341 Carded 1.31 lb 1 


82700 Acetate Slotted Screwdriver 1/8" x 2" 82713 Acetate Phillips® Screwdriver #0 x 2-1/2" 

82701 Acetate Cabinet Screwdriver 1/8" x 4" 82715 Acetate Phillips® Screwdriver #1 x 3" 

82702 Acetate Slotted Screwdriver 3/16" x 6" 82717 Acetate Phillips® Screwdriver #2 x 4" 

82706 Acetate Slotted Screwdriver 1/4" x 4" 82718 Acetate Phillips® Screwdriver #2 x 6" 

818



and Comfort 

■■Solid Impact Resistant Acetate Handle 

■ ■"Speed Zone" for Fast Turning and Control in Lower Torque 

Applications 




Tip 

Thickness 

Solid Handle Square Shank 

Screwdrivers - Slotted 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 










Product 

Weight 

Shelf Pack 

Qty. 


and Comfort 


■ ■"Speed Zone" for Fast Turning and Control in Lower 




Solid Handle Screwdrivers - Cabinet Tip 

8 


Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 



Product 

Weight 

Shelf Pack 

Qty. 


and Comfort 


■ ■"Speed Zone" for Fast Turning and Control in Lower 





Solid Handle Screwdrivers - Phillips 

Blade 

Diameter 


Handle Size 







Product 

Weight 

Shelf Pack 

Qty. 


819


■■Rated to 1,000 Volts 

■■Certified to IEC 60900:2004 Standard 

■■Dual Material Grip for Comfort and Performance 


7 Pc. Insulated Screwdriver Set 


80063 099575800634 Carded 1.85 lb 1 


80083 Insulated Phillips® Screwdriver #0 x 2-1/2" 80048 Insulated Slotted Screwdriver 5/32" x 4" 

80081 Insulated Phillips® Screwdriver #1 x 3-1/8" 80049 Insulated Slotted Screwdriver 7/32" x 5" 

80082 Insulated Phillips® Screwdriver #2 x 4" 80080 Insulated Slotted Screwdriver 1/4" x 6" 

80047 Insulated Slotted Screwdriver 3/32" x 3" 





Insulated Screwdrivers - Slotted 



Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 











Insulated Screwdrivers - Phillips 

Blade 

Diameter 


Handle Size 





Product 

Weight 

Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

820






Insulated Screwdrivers - Pozidriv 


Blade 

Diameter 


Handle Size 



80085D 099575800856 Carded #2 4 in 0.307 in 7.541 in 1.28 in x 4.03 in 0.17 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

■■Precision, Fine Tooth, Reversible Ratcheting Mechanism 

■■Includes A Straight Handle, Stubby Handle, and T-Handle 

■■Flexible and Solid Drive Shafts 

■■Premium S2 Quality Steel Bits 

■■Contoured, Dual Material Comfort Grip 


40 Pc. Ratcheting Screwdriver Set 


8940 082171089404 Boxed 4.14 lb 1 


890001GD Ratcheting Screwdriver Straight Handle 1/4" Drive - #3 Phillips Bit - 7/32" Slotted Bit 

890006GD Ratcheting Screwdriver T-Handle 1/4" Drive - 1/8" Hex Bit - 1/4" Slotted Bit 

890005GD Ratcheting Screwdriver Stubby Handle 1/4" Drive - 5/32" Hex Bit - 4mm Slotted Bit 

890007GD Shaft Adapter 1/4" to 1/4" - 3/16" Hex Bit - 5.5mm Slotted Bit 

890008GD 11" 1/4" Shank 180° Flex Bit Shaft - 7/32" Hex Bit - 6.5mm Slotted Bit 

890009GD 11" 1/4" Shank 180° Flex Socket Shaft - 1/4" Hex Bit - T-8 Torx® Bit 

310901GR Magnetic Bit Shaft 1/4 Shank x 3-1/2" - 5/16" Hex Bit - T-10 Torx® Bit 

310902GR Magnetic Bit Shaft 1/4 Shank x 6" - 3mm Hex Bit - T-15 Torx® Bit 

311901GR Socket Shaft 1/4 Shank x 3-1/2" - 4mm Hex Bit - T-20 Torx® Bit 

311902GR Socket Shaft 1/4 Shank x 6" - 5mm Hex Bit - T-25 Torx® Bit 

890003GD 30 Pc. Bit Set in Box - 6mm Hex Bit - T-27 Torx® Bit 

- #0 Phillips Bit - 7mm Hex Bit - T-30 Torx® Bit 



8 


821









8939 082171089398 Boxed 3.00 lb 1 



890001GD Ratcheting Screwdriver Straight Handle 1/4" Drive - 1/8" Hex Bit - 1/4" Slotted Bit 

890002GD 1/4" Hex Shank Bit Adapter Hex Bit Adapter - 5/32" Hex Bit - 4mm Slotted Bit 

311904GR Socket Shaft 1/4 Shank x 10" - 3/16" Hex Bit - 5.5mm Slotted Bit 

310901GR Magnetic Bit Shaft 1/4 Shank x 3-1/2" - 7/32" Hex Bit - 6.5mm Slotted Bit 

310902GR Magnetic Bit Shaft 1/4 Shank x 6" - 1/4" Hex Bit - T-8 Torx® Bit 

310903GR Magnetic Bit Shaft 1/4 Shank x 10" - 5/16" Hex Bit - T-10 Torx® Bit 

311901GR Socket Shaft 1/4 Shank x 3-1/2" - 3mm Hex Bit - T-15 Torx® Bit 

311902GR Socket Shaft 1/4 Shank x 6" - 4mm Hex Bit - T-20 Torx® Bit 

311903GR Flexible Socket Shaft 1/4 Shank x 6" - 5mm Hex Bit - T-25 Torx® Bit 

890003GD 30 Pc. Bit Set in Box - 6mm Hex Bit - T-27 Torx® Bit 












8926D 082171089268 Boxed 2.39 lb 1 

Cat. No. Description Qty. Cat. No. Description Qty. Cat. No. Description Qty. 

890001GD Ratcheting Screwdriver Straight Handle 1/4" Drive 1 - #3 Phillips Bit 1 - 3/16" Slotted Bit 1 

890002GD 1/4" Hex Shank Bit Adapter Hex Bit Adapter 1 - 3/32" Hex Bit 1 - 1/4" Slotted Bit 2 

311901GR Socket Shaft 1/4 Shank x 3-1/2" 1 - 1/8" Hex Bit 1 - T-10 Torx® Bit 1 

311902GR Socket Shaft 1/4 Shank x 6" 1 - 5/32" Hex Bit 1 - T-15 Torx® Bit 1 

311903GR Flexible Socket Shaft 1/4 Shank x 6" 1 - 3/16" Hex Bit 1 - T-20 Torx® Bit 1 

311904GR Socket Shaft 1/4 Shank x 10" 1 - 1/4" Hex Bit 1 - T-25 Torx® Bit 1 

- #1 Phillips Bit 1 - 5/16" Hex Bit 1 - T-30 Torx® Bit 1 

- #2 Phillips Bit 2 - 5/32" Slotted Bit 1 - T-40 Torx® Bit 1 

822






7 Pc. Ratcheting GearDriver® Set 


82781 099575827815 Carded 0.83 lb 1 





Ratcheting Screwdriver Handles and Shafts 


310901GR 082171000904 Carded Magnetic Bit Shaft 1/4 Shank x 3-1/2" 0.09 lb 1 

310902GR 082171009020 Carded Magnetic Bit Shaft 1/4 Shank x 6" 0.14 lb 1 

310903GR 082171109034 Carded Magnetic Bit Shaft 1/4 Shank x 10" 0.18 lb 1 

311901GR 082171019012 Carded Socket Shaft 1/4 Shank x 3-1/2" 0.08 lb 1 

311902GR 082171019029 Carded Socket Shaft 1/4 Shank x 6" 0.14 lb 1 

311903GR 082171119033 Carded Flexible Socket Shaft 1/4 Shank x 6" 0.14 lb 1 

311904GR 082171311901 Carded Socket Shaft 1/4 Shank x 10" 1.60 lb 1 

890001GD 082171900013 Carded Ratcheting Screwdriver Straight Handle 1/4" Drive 0.36 lb 1 

890005GD 082171900051 Carded Ratcheting Screwdriver Stubby Handle 1/4" Drive 0.26 lb 1 

890006GD 082171900068 Carded Ratcheting Screwdriver T-Handle 1/4" Drive 0.31 lb 1 

8 

Adapters 


312901GD 082171312908 Carded Adapter for 13mm Vortex® Socket 0.04 lb 1 

890002GD 082171890000 Carded 1/4" Hex Shank Bit Adapter Hex Bit Adapter 0.03 lb 1 

890007GD 082171900075 Carded Shaft Adapter 1/4" to 1/4" 0.05 lb 1 


823


■■Ergonomic Cushion Grip for Reduced Hand Fatigue and 

Greater Comfort 

■■Quick Change Nutdriver Shank 

■■Slotted 1/4" X Phillips® #2 

■■Slotted 3/16" X Phillips® #1 

6-in-1 Cushion Grip Screwdriver 


82782 099575827822 Retail Packaging 0.80 lb 1 






■■For Standard 1/4" Drive Bits 

Magnetic Bit Holding Screwdriver 

Cat. No. UPC No. Packaging Tip Size Overall Length Product Weight Shelf Pack Qty. 

82783 099575827839 Carded 1/4 in 10.75 in 0.27 lb 1 


■■Large Assortment of Premium S2 Steel Screwdriver and 

Nutdriver Bits 

■■Includes a 1/4" Bit Holder and a Storage Case 

■■Multiple Quantities on Some Sizes Listed Below Due 

to Varying Lengths 

83 Pc. Screwdriver Accessory Set 


82784 099575827846 Boxed 2.12 lb 1 

Cat. No. Description Qty. Cat. No. Description Qty. Cat. No. Description Qty. 

- 1/4" Bit Holder 1 - 5/32" Nutdriver Bit 1 - T-20 Torx® Bit 3 

- #0 Phillips Bit 1 - 3/16" Nutdriver Bit 1 - T-25 Torx® Bit 3 




- #2 Pozidriv® Bit 2 - 11/32" Nutdriver Bit 1 - T-7 Tamper-proof Torx® Bit 1 

- #3 Pozidriv® Bit 3 - 3/8" Nutdriver Bit 1 - T-8 Tamper-proof Torx® Bit 1 

- #2 Square Bit 3 - 7/16" Nutdriver Bit 1 - T-10 Tamper-proof Torx® Bit 1 

- #3 Square Bit 3 - 6 - 8 Slotted Bit 3 - T-15 Tamper-proof Torx® Bit 1 

- 5/32" Hex Bit 3 - 8 - 10 Slotted Bit 5 - T-20 Tamper-proof Torx® Bit 1 



- 1/4" Hex Bit 2 - T-10 Torx® Bit 2 - T-30 Tamper-proof Torx® Bit 1 

- 5/16" Hex Bit 2 - T-15 Torx® Bit 3 

824



■■1/4" Drive to Bit Drive Adapter 

31 Pc. Bit Set with Adapter in Box 


890004GD 082171890048 Bagged 0.85 lb 1 


- 1/4" Bit Holder - 7mm Hex Bit - #3 Phillips Bit 

- 1/8" Hex Bit - 8mm Hex Bit - T-8 Torx® Bit 

- 5/32" Hex Bit - 5/32" Slotted Bit - T-10 Torx® Bit 



- 1/4" Hex Bit - 4mm Slotted Bit - T-25 Torx® Bit 

- 5/16" Hex Bit - 5.5mm Slotted Bit - T-27 Torx® Bit 

- 3mm Hex Bit - 6.5mm Slotted Bit - T-30 Torx® Bit 

- 4mm Hex Bit - #0 Phillips Bit - T-40 Torx® Bit 

- 5mm Hex Bit - #1 Phillips Bit 

- 6mm Hex Bit - #2 Phillips Bit 


30 Pc. Bit Set in Box 

8 


890003GD 082171089008 Bagged 0.25 lb 1 


- 1/8" Hex Bit - 7mm Hex Bit - #2 Phillips Bit 

- 5/32" Hex Bit - 8mm Hex Bit - #3 Phillips Bit 




- 5/16" Hex Bit - 4mm Slotted Bit - T-20 Torx® Bit 






825



10 Pc. Bit Set with Adapter 


890010GD 082171900105 Bagged 0.15 lb 1 


- #1 Phillips Bit - 5.5mm Slotted Bit - T-20 Torx® Bit 

- #2 Phillips Bit - 6.5mm Slotted Bit - T-25 Torx® Bit 


- 4mm Slotted Bit - T-15 Torx® Bit 

■■1/4" Slotted X #2 Phillips Offset Screwdriver 

■■3/16" Slotted X #1 Phillips Offset Screwdriver 

2 Pc. Offset Screwdriver Set 


80072 099575800726 Carded 0.08 lb 1 


■■Holds Screw Securely for Use in Hard-To-Reach Areas 

■■Twist the Bit to Hold Screw for Easy Starting 

■■Strong Magnet on Opposite End Picks Up Dropped Parts 

■■Also Includes a Pocket Clip Length: 5-5/8" 

Phillips Screw Starter 


2283 082171022838 Carded 0.05 lb 1 

■■Holds Screw Securely for Use in Hard-To-Reach Areas 

■■Twist the Bit to Hold Screw for Easy Starting 

■■Strong Magnet on Opposite End Picks Up Dropped Parts 

■■Also Includes a Pocket Clip Length: 5-5/8" 

Slotted Screw Starter 


2282D 082171022821 Carded 0.07 lb 1 

826



■■Interchangeable, Color Coded Nutdriver Shafts 



16 Pc. Ratcheting Nutdriver Set - SAE/Metric 


8916D 082171089169 Boxed 2.60 lb 1 


890005GD Ratcheting Screwdriver Stubby Handle 1/4" Drive 890140GD 7/16" Nutdriver Shaft 891090GD 9mm Nutdriver Shaft 

890060GD 3/16" Nutdriver Shaft 890160GD 1/2" Nutdriver Shaft 891100GD 10mm Nutdriver Shaft 

890080GD 1/4" Nutdriver Shaft 891050GD 5mm Nutdriver Shaft 891110GD 11mm Nutdriver Shaft 

890100GD 5/16" Nutdriver Shaft 891060GD 6mm Nutdriver Shaft 891120GD 12mm Nutdriver Shaft 

890110GD 11/32" Nutdriver Shaft 891070GD 7mm Nutdriver Shaft 

890120GD 3/8" Nutdriver Shaft 891080GD 8mm Nutdriver Shaft 





8 Pc. Ratcheting Nutdriver Set - SAE 

8 


8908D 082171089084 Boxed 1.70 lb 1 


890005GD Ratcheting Screwdriver Stubby Handle 1/4" Drive 890110GD 11/32" Nutdriver Shaft 

890060GD 3/16" Nutdriver Shaft 890120GD 3/8" Nutdriver Shaft 




827






9 Pc. Ratcheting Nutdriver Set - Metric 


8909D 082171089091 Boxed 1.95 lb 1 


890005GD Ratcheting Screwdriver Stubby Handle 1/4" Drive 891090GD 9mm Nutdriver Shaft 

891050GD 5mm Nutdriver Shaft 891100GD 10mm Nutdriver Shaft 



891080GD 8mm Nutdriver Shaft 

■■Color Coded for Size Identification 

■■Etched with Size on Shaft 

Ratcheting Nutdriver Shafts 


Cat. No. UPC No. Packaging Description Fastener Size Shaft Length Product Weight Shelf Pack Qty. 

890008GD 082171900082 Carded 11" 1/4" Shank 180° Flex Bit Shaft 1/4 in 11 in 0.30 lb 1 

890009GD 082171900099 Carded 11" 1/4" Shank 180° Flex Socket Shaft 1/4 in 11 in 0.27 lb 1 

890060GD 082171900600 Carded 3/16" Nutdriver Shaft 3/16 in - 0.10 lb 1 







891050GD 082171910500 Carded 5mm Nutdriver Shaft 5 mm - 0.10 lb 1 








828




7 Pc. Hollow Shaft Cushion Grip Nutdriver 

Set - SAE 


82765 099575827655 Carded 2.35 lb 1 


82750 Cushion Grip Nutdriver 3/16 x 3" 82754 Cushion Grip Nutdriver 3/8 x 3" 



82753 Cushion Grip Nutdriver 11/32 x 3" 



7 Pc. Hollow Shaft Cushion Grip Nutdriver 

Set - Metric 

8 


82764 099575827648 Carded 2.53 lb 1 


82757D Cushion Grip Nutdriver 6 mm x 3" 82761 Cushion Grip Nutdriver 10 mm x 3" 

82758 Cushion Grip Nutdriver 7 mm x 3" 82762 Cushion Grip Nutdriver 11 mm x 3" 

82759 Cushion Grip Nutdriver 8 mm x 3" 82763 Cushion Grip Nutdriver 12 mm x 3" 

82760 Cushion Grip Nutdriver 9 mm x 3" 


829


■■Cushion Grip for Increased Comfort 

Cushion Grip Hollow Shaft Nutdrivers - SAE 

Cat. No. UPC No. Packaging Fastener Size Shaft Length Bolt Clearance Overall Length 

Handle Size 


82750 099575827501 Carded 3/16 in 3.000 in 0.185 in 7.330 in 1.42 in x 4.33 in 0.12 lb 1 







Product 

Weight 

Shelf Pack 

Qty. 

■■Cushion Grip for Increased Comfort 

Cushion Grip Hollow Shaft Nutdrivers - Metric 



Handle Size 


82757D 099575827570 Carded 6 mm 3.000 in 0.236 in 7.330 in 1.42 in x 4.33 in 0.12 lb 1 

82758 099575827587 Carded 7 mm 3.000 in 0.275 in 7.330 in 1.42 in x 4.33 in 0.12 lb 1 





Product 

Weight 

Shelf Pack Qty. 


830



■■Precision Machined, Blasted Tips Provide Superior Fit Between 

the Tip and the Fastener Reducing Slippage and Fastener Wear 

■■Full Shaft Heat Treat Provides Superior Strength That Resists Tip 

Wear and Shank Twisting / Breakage 

■■Fully Polished Chrome Plated Blade Provides a High Luster That 

Prevents Corrosion 

■■Nut Bolsters on Blade Provide Additional Turning Power with 

a Wrench 

■■Dual Material Handle for Comfort and Performance While 

Reducing Fatigue in Repetitive Situations 

■■Larger Than Average Handle Lengths and Diameters for Optimal 

Power and Comfort 

■■Domed Handle for Comfortably Applying Added Pressure 


66-621 781412666212 Boxed 2.65 lb 1 


- Molded Storage Tray 66-441 Dual Material Slotted Screwdriver 1/4 x 4" 

66-400 Dual Material Phillips® Screwdriver #1 x 3" 66-443 Dual Material Slotted Screwdriver 5/16 x 6" 

66-402 Dual Material Phillips® Screwdriver #2 x 4" 66-445 Dual Material Slotted Screwdriver 3/8 x 8" 











a Wrench 






Cat. No. UPC No. Packaging Screw Size 

Tip 

Thickness 

Tip 

Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 


66-440 781412664409 Bagged #8, 9 0.040 in 1/4 in 2.250 in 0.250 in 6.095 in 1.25 in x 3.86 in 0.17 lb 1 


66-443 781412664430 Bagged #10 0.050 in 5/16 in 6.000 in 0.313 in 10.700 in 1.50 in x 4.70 in 0.39 lb 1 

66-445 781412664454 Bagged 

Dual Material, Slotted Tip, Round Shank Screwdrivers 

#12, 14-24, 

0.250-0.375 

Product 

Weight 

Shelf 

Pack Qty. 

0.066 in 3/8 in 8.000 in 0.375 in 12.660 in 1.53 in x 4.67 in 0.52 lb 1 

8 


831










a Wrench 







Dual Material, Phillips Tip, Round Shank Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 


66-400 781412664003 Bagged P1 0.188 in #1 3.000 in 0.188 in 6.850 in 1.20 in x 3.87 in 0.17 lb 1 



Product 

Weight 

Shelf Pack 

Qty. 









■■Solid Impact Resistant Acetate Handle Core for 

Uncompromising Durability 

■■Cushioned Rubber Cover Preferred by Electricians for Comfort 

and Slippage Control 





66-612 781412666120 Boxed 3.33 lb 1 


29-415 Vinyl Roll 8 Pockets 66-501 Cushion Grip, Round Shank Slotted Screwdriver 1/4 x 4" 

66-524 Cushion Grip, Round Shank Phillips® Screwdriver #1 x 3" 66-505 Cushion Grip, Round Shank Slotted Screwdriver 1/4 x 4" 




8 Pc. Electrician's Screwdriver Set 

832


















66-614 781412666144 Boxed 3.06 lb 1 


29-413 Vinyl Roll 7 Pockets 66-524 Cushion Grip, Round Shank Phillips® Screwdriver #1 x 3" 

66-561 Cushion Grip, Round Shank Cabinet Screwdriver 3/16 x 3" 66-527 Cushion Grip, Round Shank Phillips® Screwdriver #2 x 4" 

66-563 Cushion Grip, Round Shank Cabinet Screwdriver 3/16 x 4" 66-544 Cushion Grip, Square Shank Slotted Screwdriver 1/4 x 4" 

66-564 Cushion Grip, Round Shank Cabinet Screwdriver 3/16 x 6" 66-504 Cushion Grip, Round Shank Slotted Screwdriver 5/16 x 6" 

















66-615 781412666151 Boxed 3.61 lb 1 


29-411 Vinyl Roll 5 Pockets 66-527 Cushion Grip, Round Shank Phillips® Screwdriver #2 x 4" 

66-564 Cushion Grip, Round Shank Cabinet Screwdriver 3/16 x 6" 66-544 Cushion Grip, Square Shank Slotted Screwdriver 1/4 x 4" 

66-567 Cushion Grip, Round Shank Cabinet Screwdriver 3/16 x 8" 66-504 Cushion Grip, Round Shank Slotted Screwdriver 5/16 x 6" 

8 


833
















■■Meets or Exceeds ASME B107.15-2002 


Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 





66-550 781412665505 Bagged #15, 18, 20 0.055 in 3/8 in 8.000 in 0.375 in 12.875 in 1.25 in x 4.80 in 0.64 lb 1 


66-546 781412665468 Bagged 

Electrician's, Slotted Tip, Square Shank Screwdrivers 

#12, 14-24, 

0.250-0.375 

Product 

Weight 

Shelf 

Pack Qty. 



















Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 







66-509 781412665093 Bagged 

66-510 781412665109 Bagged 

Electrician's, Slotted Tip, Round Shank Screwdrivers 

#12, 14-24, 

0.250-0.375 

#12, 14-24, 

0.250-0.375 

Product 

Weight 

Shelf Pack 

Qty. 



834

















Electrician's, Cabinet Tip, Round Shank Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 







Product 

Weight 

Shelf Pack 

Qty. 

















Electrician's, Phillips Tip, Round Shank Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 








Product 

Weight 

Shelf Pack 

Qty. 

8 


835









■■Tri-Lobe Handle Conforms to the Hand for Optimal Power 

and Comfort 

■■Solid Impact Resistant Acetate Handle for 


■■Broad, Shallow Flutes with Chamfered Edges Provide a High 

Efficiency, High Torque Handle with No Sharp Edges 




19 Pc. Solid Handle Screwdriver Set 


66-611 781412666113 Boxed 8.20 lb 1 



29-411 Vinyl Roll 5 Pockets 66-155 Acetate Phillips® Screwdriver #1 x 6" 



66-253 Acetate Cabinet Screwdriver 1/8 x 3" 66-161 Acetate Phillips® Screwdriver #3 x 6" 


66-255 Acetate Cabinet Screwdriver 1/8 x 4" 66-203 Acetate Slotted Screwdriver 3/16 x 4" 



66-150 Acetate Phillips® Screwdriver #2 x 1.5" 66-220 Acetate Slotted Screwdriver 3/8 x 8" 

66-152 Acetate Phillips® Screwdriver #0 x 2" 66-226 Acetate Slotted Screwdriver 7/16 x 12" 

66-153 Acetate Phillips® Screwdriver #1 x 3" 66-232 Acetate Slotted Screwdriver 1/4 x 1.5" 

836










and Comfort 









66-620 781412666205 Boxed 2.63 lb 1 







8 Pc. Solid Handle Combination Screwdriver Set 









and Comfort 









7 Pc. Solid Handle, Slotted Tip, Square Shank 



66-626 781412666267 Boxed 2.87 lb 1 

8 



29-414 Vinyl Roll 7 Pockets 66-217 Acetate Slotted Screwdriver 5/16 x 6" 

66-203 Acetate Slotted Screwdriver 3/16 x 4" 66-221 Acetate Slotted Screwdriver 3/8 x 10" 


66-214 Acetate Slotted Screwdriver 5/16 x 8" 66-232 Acetate Slotted Screwdriver 1/4 x 1.5" 

837










and Comfort 










66-606 781412666069 Boxed 2.31 lb 1 

















and Comfort 












66-610 781412666106 Boxed 1.96 lb 1 





838










and Comfort 









66-608 781412666083 Boxed 1.00 lb 1 

Contents: 

Contents: 



66-103 Acetate Slotted Screwdriver 5/16 x 6" 66-262 Acetate Cabinet Screwdriver 3/16 x 4" 


6 Pc. Solid Handle, Slotted Tip, Round Shank 










and Comfort 








4 Pc. Solid Handle Cabinet Slotted Tip 



66-618 781412666182 Boxed 1.16 lb 1 

8 



29-410 Vinyl Roll 4 Pockets 66-262 Acetate Cabinet Screwdriver 3/16 x 4" 

66-268 Acetate Cabinet Screwdriver 3/16 x 8" 66-267 Acetate Cabinet Screwdriver 3/16 x 6" 


839










and Comfort 









66-604 781412666045 Boxed 2.60 lb 1 


29-415 Vinyl Roll 8 Pockets 66-327 Acetate Torx® Screwdriver T25 x 3" 

66-321 Acetate Torx® Screwdriver T10 x 3" 66-329 Acetate Torx® Screwdriver T27 x 4.5" 

66-324 Acetate Torx® Screwdriver T15 x 1.250" 66-330 Acetate Torx® Screwdriver T30 x 4.5" 

66-323 Acetate Torx® Screwdriver T15 x 3" 66-332 Acetate Torx® Screwdriver T40 x 6" 


8 Pc. Solid Handle Torx® Screwdriver Set 


6 Pc. Solid Handle Phillips Screwdriver Set 









and Comfort 










66-619 781412666199 Boxed 2.16 lb 1 



66-150 Acetate Phillips® Screwdriver #2 x 1.5" 66-161 Acetate Phillips® Screwdriver #3 x 6" 

66-152 Acetate Phillips® Screwdriver #0 x 2" 66-164 Acetate Phillips® Screwdriver #4 x 8" 


840


4 Pc. Solid Handle Phillips Screwdriver Set 









and Comfort 










66-639 781412666397 Boxed 1.20 lb 1 



66-152 Acetate Phillips® Screwdriver #0 x 2" 66-161 Acetate Phillips® Screwdriver #3 x 6" 


8 


841










and Comfort 









Solid Handle, Slotted Tip, Square Shank Screwdrivers 



Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 










66-220 781412662207 Bagged 

66-221 781412662214 Bagged 

66-223 781412662238 Bagged 

66-224 781412662245 Bagged 

#12, 14-24, 

0.250-0.375 

#12, 14-24, 

0.250-0.375 

#12, 14-24, 

0.250-0.375 

#12, 14-24, 

0.250-0.375 

Product 

Weight 

Shelf 

Pack Qty. 





66-226 781412662269 Bagged - 0.070 in 7/16 in 12.000 in 0.438 in 18.000 in 1.25 in x 5.50 in 0.94 lb 1 

842










and Comfort 










Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 





66-106 781412661064 Bagged 

66-108 781412661088 Bagged 

66-109 781412661095 Bagged 

Solid Handle, Slotted Tip, Round Shank Screwdrivers 

#12, 14-24, 

0.250-0.375 

#12, 14-24, 

0.250-0.375 

#12, 14-24, 

0.250-0.375 

Product 

Weight 

Shelf 

Pack Qty. 




8 


843










and Comfort 








Solid Handle, Cabinet Tip, Round Shank Screwdrivers 



Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 













Product 

Weight 

Shelf Pack 

Qty. 

844










and Comfort 










Solid Handle, Phillips Tip, Round Shank Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 








Product 

Weight 

Shelf Pack 

Qty. 









and Comfort 









Solid Handle, Slotted Tip, Stubby Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 




Product 

Weight 

Shelf Pack 

Qty. 

8 


845










and Comfort 









GGG-S-121 E 

Solid Handle, Slotted Tip, with Pocket 

Clip Screwdriver 

Cat. No. UPC No. Packaging Blade Type 

66-202 781412662023 Bagged 

66-253 781412662535 Bagged 

Square Shank, 

Blasted Non-Slip Tip 

Round Shank, 

Blasted Non-Slip Tip 

Screw 

Size 

Tip 

Thickness 

Tip 

Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 


Product 

Weight 

Shelf 

Pack Qty. 

#2, 3 0.020 in 1/8 in 3.000 in 0.125 in 5.250 in 0.62 in x 2.25 in 0.04 lb 1 

#2, 3 0.020 in 1/8 in 3.000 in 0.125 in 5.250 in 0.62 in x 2.25 in 0.06 lb 1 










and Comfort 









Solid Handle, Phillips Tip, Stubby Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 



Product 

Weight 

Shelf Pack 

Qty. 

846










and Comfort 










Solid Handle, Phillips Tip, with Pocket 

Clip Screwdriver 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 



Product 

Weight 

Shelf Pack 

Qty. 









and Comfort 









Solid Handle, Torx®, Round Shank Screwdrivers 

Tip 

Thickness 

Tip Size 

Blade 

Length 

Blade 

Diameter 

Overall 

Length 

Handle Size 


66-321 781412663211 Bagged T-10 0.188 in T10 3.000 in 0.188 in 6.750 in 1.06 in x 3.75 in 0.15 lb 1 








Product 

Weight 

Shelf Pack 

Qty. 

8 


847



■■Smooth, Silent Clutch-Based Ratcheting Action 

■■In-Handle Storage for Six Bits 



66-580 781412665802 Bagged 1.59 lb 1 


- #1 Phillips Bit - 10 - 12 Slotted Bit - T-10 Torx® Bit 

- #2 Phillips Bit - 5 - 6 Slotted Bit - T-15 Torx® Bit 


■■Positive Gripping Action Holds Screws in Place so They Can be 

Started in Awkward, Hard-to-Reach Areas 

■■Blade Separates to Securely Hold the Fastener 

3 Pc. Screw and Nut Starter Set 


66-962 781412669626 Boxed 0.37 lb 1 



29-472 Vinyl Roll 3 Pockets 66-933 5" Screw Starter, Phillips Screws 

66-943 5" Nut Starter, Hex Nuts 66-924 5" Screw Starter, Slotted Screws 

Offset Ratcheting Screwdriver 


■■Designed for Use with Confined, Hard-to-Reach Fasteners 

■■Precision Milled Tips for Precise Fit to the Fastener 

■■Has a Reversing Ratcheting Mechanism 


66-598 781412665987 Bagged #2, 1/4 3.750 in 0.32 lb 1 




Offset Screwdriver, Phillips Tip 


66-609 781412666090 Bagged #1, #2 6.000 in 0.10 lb 1 

66-613 781412666137 Bagged #3, #4 6.000 in 0.26 lb 1 

848





Offset Screwdriver, Slotted Tip 


66-601 781412666014 Bagged 5/32 in 3.750 in 0.03 lb 1 

66-603 781412666038 Bagged 1/4 in 4.625 in 0.09 lb 1 

66-605 781412666052 Bagged 5/16 in 5.188 in 0.25 lb 1 

66-607 781412666076 Bagged 3/8 in 6.125 in 0.24 lb 1 

Nut Starter - Hex Nuts 






66-943 781412669435 Bagged 5.000 in 0.05 lb 1 


■■Positive Gripping Action Holds Screws in Place so They Can 

■■Be Started in Awkward, Hard-to-Reach Areas 


Screw Starters - Phillips Screws 

8 


66-933 781412669336 Bagged 5.000 in 0.05 lb 1 

66-936 781412669367 Bagged 9.000 in 0.08 lb 1 





Screw Starters - Slotted Screws 


66-921 781412669213 Bagged 2.500 in 0.03 lb 1 

66-924 781412669244 Bagged 5.000 in 0.04 lb 1 

66-927 781412669275 Bagged 9.000 in 0.06 lb 1 


849



■■Full Hollow Shafts Facilitate Work with Long Bolt 

& Stud Applications 

■■Shaft is Precision Formed From High Alloy Steel Using the Most 

Up-To-Date Manufacturing Process and Heat Treat for Precise 

Nut Openings and Greater Durability 

■■Fully Color Coded Sae Handles (Handle & End) for Easy 

Size Identification 

■■Fully Polished Chrome Plated Shaft Provides a High Luster That 



7 Pc. Solid Handle, Hollow Shaft Nutdriver Set - SAE 


66-843 781412668438 Boxed 2.70 lb 1 


29-426 Vinyl Roll 7 Pockets 66-811 Acetate Hollow Shaft Nutdriver 11/32 x 3" 

66-808 Acetate Hollow Shaft Nutdriver 1/4 x 3" 66-812 Acetate Hollow Shaft Nutdriver 3/8 x 3" 











Size Identification 




11 Pc. Solid Handle, Hollow Shaft Nutdriver Set - SAE 


66-845 781412668452 Boxed 2.31 lb 1 


29-456 Vinyl Roll 11 Pockets 66-811 Acetate Hollow Shaft Nutdriver 11/32 x 3" 






850








■■Fully Colored Black Handles (Handle & End) for Easy 

Metric Identification 



7 Pc. Solid Handle, Hollow Shaft Nutdriver 

Set - Metric 


66-847 781412668476 Boxed 2.05 lb 1 


29-426 Vinyl Roll 7 Pockets 66-834 Acetate Hollow Shaft Nutdriver 7 mm x 3" 

66-831 Acetate Hollow Shaft Nutdriver 5 mm x 3" 66-835 Acetate Hollow Shaft Nutdriver 8 mm x 3" 

66-832 Acetate Hollow Shaft Nutdriver 5-1/2 mm x 3" 66-836 Acetate Hollow Shaft Nutdriver 9 mm x 3" 









Metric Identification 



11 Pc. Solid Handle, Hollow Shaft Nutdriver 

Set - Metric 


66-848 781412668483 Boxed 2.40 lb 1 


29-456 Vinyl Roll 11 Pockets 66-835 Acetate Hollow Shaft Nutdriver 8 mm x 3" 



66-832 Acetate Hollow Shaft Nutdriver 5-1/2 mm x 3" 66-838 Acetate Hollow Shaft Nutdriver 11 mm x 3" 



8 


851






■■Color Coded Sae Handle Panels for Easy Size Identification 




7 Pc. Solid Handle, Solid Shaft Nutdriver Set - SAE 


66-843A 781412068436 Boxed 1.86 lb 1 


66-806A Acetate Nutdriver 3/16 x 3" 66-812A Acetate Nutdriver 3/8 x 3" 



66-811A Acetate Nutdriver 11/32 x 3" 


7 Pc. Solid Handle, Solid Shaft Nutdriver Set - Metric 





■■Color Coded Blue Handle Panels for Metric Identification 




66-847A 781412068474 Boxed 1.84 lb 1 


66-831A Acetate Nutdriver 5 mm x 3" 66-836A Acetate Nutdriver 9 mm x 3" 



66-835A Acetate Nutdriver 8 mm x 3" 

852









■■Size Identification 


Solid Handle, Hollow Shaft, 6 Point Opening 

Nutdrivers - SAE 


Handle Size 


66-806 781412668063 Bagged 3/16 in 3.000 in 0.140 in 6.620 in 1.00 in x 3.60 in 0.12 lb 1 











Product 

Weight 

Shelf Pack 

Qty. 








■■Metric Identification 

Solid Handle, Hollow Shaft, 6 Point Opening 

Nutdrivers - Metric 


Handle Size 


Product 

Weight 

Shelf Pack 

Qty. 

66-829 781412668292 Bagged 4 mm 3.000 in 0.157 in 6.620 in 1.00 in x 3.60 in 0.13 lb 1 


66-832 781412668322 Bagged 5.5 mm 3.000 in 0.157 in 6.620 in 1.00 in x 3.60 in 0.14 lb 1 









8 


853






■■Color Coded Sae Handle Panels for Easy Size Identification 




Solid Handle, Solid Shaft, 6 Point Opening 

Nutdrivers - SAE 


Handle Size 


66-806A 781412660685 Bagged 3/16 in 3.000 in 0.000 in 6.620 in 1.00 in x 3.60 in 0.12 lb 1 







Product 

Weight 

Shelf Pack 

Qty. 






■■Color Coded Blue Handle Panels for Metric Identification 



Solid Handle, Solid Shaft, 6 Point Opening 

Nutdrivers - Metric 


Handle Size 


Product 

Weight 

Shelf Pack 

Qty. 

66-831A 781412663815 Bagged 5 mm 3.000 in 0.000 in 6.620 in 1.00 in x 3.60 in 0.12 lb 1 







854



■■T-Handle Provides Additional Leverage for Greater Torque 



■■Color Coded Handles with Size Molded Into the Handle for 

Easy Identification 








66-743 781412667431 Boxed 2.87 lb 1 


66-706 Dual Material T-Handle Nutdriver 3/16 x 4.5" 66-712 Dual Material T-Handle Nutdriver 3/8 x 4" 

66-708 Dual Material T-Handle Nutdriver 1/4 x 4.5" 66-714 Dual Material T-Handle Nutdriver 7/16 x 4" 

66-710 Dual Material T-Handle Nutdriver 5/16 x 4" 66-716 Dual Material T-Handle Nutdriver 1/2 x 4" 

66-711 Dual Material T-Handle Nutdriver 11/32 x 4" 

7 Pc. Dual Material, T-Handle Nutdriver Set - SAE 












7 Pc. Dual Material, T-Handle Nutdriver Set - Metric 

8 


66-747 781412667479 Boxed 2.67 lb 1 


66-731 Dual Material T-Handle Nutdriver 5 mm x 4.5" 66-736 Dual Material T-Handle Nutdriver 9 mm x 4" 

66-733 Dual Material T-Handle Nutdriver 6 mm x 4.5" 66-737 Dual Material T-Handle Nutdriver 10 mm x 4" 

66-734 Dual Material T-Handle Nutdriver 7 mm x 4" 66-738 Dual Material T-Handle Nutdriver 11 mm x 4" 

66-735 Dual Material T-Handle Nutdriver 8 mm x 4" 


855














Dual Material, T-Handle Nutdrivers - SAE 


Handle Size 









Product 

Weight 

Shelf Pack 

Qty. 













Dual Material, T-Handle Nutdrivers - Metric 


Handle Size 


Product 

Weight 

Shelf Pack 

Qty. 








856


■■Black Oxide Tips: Strong and Durable Construction with Blasted 

Tip to Reduce Slippage 

■■Chrome Plated Blades: Provides Corrosion Resistance and Easy 

Cleaning - Sizes Laser Etched on Blade 

■■Dual Material Handles: Designed for Improved Comfort 

■■and Performance 

■■Hang Holes: Can Be Used to Hang on a Wall or With 

an Additional Driver to Create a T-Handle 

■■Includes 2 Pocket Clip Screwdrivers 

10 Pc. Dual Material Combination Screwdriver Set 


CSD10 037103256744 Carded 1.65 lb 1 


CSDP34V Dual Material Screwdriver, Phillips #1 X 4" CSD33V Dual Material Screwdriver, Slotted 3/16" X 3" 

CSDP41V Dual Material Screwdriver, Phillips #2 X 1-1/4" CSD36V Dual Material Screwdriver, Slotted 3/16" X 6" 

CSDP44V Dual Material Screwdriver, Phillips #2 X 4" CSD41V Dual Material Screwdriver, Slotted 1/4" X 1-1/4" 

- Pocket Clip Screwdriver, Phillips #0 x 2 CSD44V Dual Material Screwdriver, Slotted 1/4" X 4" 

- Pocket Clip Screwdrive, Slotted 1/8" x 2 CSD46V Dual Material Screwdriver, Slotted 1/4" X 6" 






and Performance 




8 


CSD6 037103256720 Carded 1.06 lb 1 




CSD33V Dual Material Screwdriver, Slotted 3/16" X 3" CSD46V Dual Material Screwdriver, Slotted 1/4" X 6" 


857












CSD4PC 037103256706 Carded 0.69 lb 1 















CSD2 037103256690 Carded 0.52 lb 1 


CSDP44V Dual Material Screwdriver, Phillips #2 X 4" CSD144 Dual Material Screwdriver, Slotted 1/4" X 4" 

858










Dual Material, Phillips Tip, Round 

Shank Screwdrivers 

Cat. No. UPC No. Packaging Tip Size Blade Length Product Weight Shelf Pack Qty. 

CSDP34 037103256980 Bulk #1 4 in 0.11 lb 1 

CSDP34V 037103256973 Carded #1 4 in 0.13 lb 3 

CSDP41V 037103256997 Carded #2 1-1/4 in 0.11 lb 3 

CSDP44 037103257017 Bulk #2 4 in 0.17 lb 1 













Dual Material, Torx Tip, Round Shank Screwdrivers 

Cat. No. UPC No. Packaging Tip Size Product Weight Shelf Pack Qty. 

CTD10V 037103257055 Carded T10 0.13 lb 3 







8 


859










Dual Material, Slotted Tip, Square 



CSDS44 037103256942 Bulk 1/4 in 4 in 0.19 lb 1 

CSDS44V 037103256935 Carded 1/4 in 4 in 0.21 lb 3 

CSDS56 037103256966 Bulk 5/16 in 6 in 0.27 lb 1 

CSDS56V 037103256959 Carded 5/16 in 6 in 0.29 lb 3 










Dual Material, Slotted Tip, Round 



CSD33V 037103256829 Carded 3/16 in 3 in 0.15 lb 3 


CSD36 037103256843 Bulk 3/16 in 6 in 0.12 lb 1 


CSD41V 037103256867 Carded 1/4 in 1-1/4 in 0.11 lb 3 







860


■■Dual Material Handle: Designed for Improved Comfort 




7-in-1 Dual Material Interchangeable Bit Screwdriver 


CMBD7P 037103256737 Merchandiser 0.41 lb 12 


- 1/4" Nutdriver Bit - #1 Phillips Bit - 9/32" Slotted Bit 

- 5/16" Nutdriver Bit - #2 Phillips Bit 

- 7/16" Nutdriver Bit - 3/16" Slotted Bit 

■■Crescent® Series 2000 Screwdriver Set 

■■Set Contains 10 Popular-Sized Screwdrivers 

■■Available in Convenient Reusable Plastic Pouch 

10 Pc. Series 2000 Cushion Grip Screwdriver Set 

8 


2010 037103028426 Pouch 3.20 lb 1 


25013 Cushion Grip Phillips® Series 2000 Screwdriver #1 x 3" 21434 Cushion Grip Slotted Series 2000 Screwdriver 1/4 x 4" 


2522 Cushion Grip Phillips® Series 2000 Screwdriver #2 x 1.25" 21436 Cushion Grip Slotted Series 2000 Screwdriver 5/16 x 6" 

24016 Cushion Grip Slotted Series 2000 Screwdriver 5/16 x 6" 22436 Cushion Grip Slotted Series 2000 Screwdriver 3/16 x 6" 



861



■■Set Contains 8 Popular-Sized Screwdrivers 

■■Available in Convenient Reusable Plastic Pouches 



2008MR 037103104649 Pouch 3.00 lb 3 





2343114 Cushion Grip Slotted Series 2000 Screwdriver 1/4 x 1.25" 21438 Cushion Grip Slotted Series 2000 Screwdriver 3/8 x 8" 


■■6 Popular-Sized Screwdrivers 

■■Available in Convenient Reusable Plastic Pouch 




2006 037103028396 Pouch 2.05 lb 1 





862


■■Round Shaft 

■■Wide Tip Easily Turns Damaged Heads 

■■Tapered, Torque-Enhancing Cushion Grip Handle 

■■Interlocks With Durable Core, Provides a More Powerful, 

Comfortable Grip 

Series 2000 Mechanic's Cushion Grip, Slotted Tip, 

Round Shank Screwdrivers 

Cat. No. UPC No. Packaging Tip Size Blade Length Blade Diameter Overall Length Product Weight Shelf Pack Qty. 

21433 037103466143 Boxed 1/4 in 3 in 1/4 in 6.75 in 0.20 lb 6 


21436 037103466181 Boxed 5/16 in 6 in 5/16 in 11 in 0.35 lb 6 




■■Square Shaft 



■■Interlocks With Durable Core, Provides a Powerful, and 


Series 2000 Mechanic's Cushion Grip, Slotted Tip, 

Square Shank Screwdrivers 


23434 037103466433 Bagged 1/4 in 4 in 1/4 in 8.375 in 0.25 lb 6 

23436 037103466457 Bagged 5/16 in 6 in 5/16 in 11 in 0.40 lb 6 



8 






Series 2000 Electrician's Slotted Tip, Round 











863


Series 2000 Electrician's Slotted Tip Screwdriver 

■■Round, Specially Coated Shaft 

■■Intended to Reduce Possibility of Shorting Wires 





24016 037103466808 Boxed 5/16 in 6 in 5/16 in 11 in 0.35 lb 6 

■■Square Shaft 



■■Interlocks With Durable Core, Provides a More Powerful, 


Series 2000 Cushion Grip, Slotted Tip, 

Stubby Screwdriver 


2343114 037103466419 Boxed 1/4 in 1.25 in 1/4 in 3.125 in 0.10 lb 6 


Series 2000 Cushion Grip, Phillips Screwdrivers 


■■Alloy Steel Incorporated Into Blade Extends Tip Life 




■■Phillips® is a Registered Trademark of the Phillips 

Screw Company 


25013 037103466518 Boxed #1 3 in 3/16 in 6.75 in 0.15 lb 6 


2522 037103466587 Boxed #2 1.25 in 1/4 in 3.125 in 0.15 lb 6 

2503 037103466556 Boxed #3 6 in 5/16 in 11 in 0.35 lb 6 


864






Series 2000 Cushion Grip, Scratch Awl 


2245 037103466396 Bagged 3/32 in 3.875 in 1/4 in 7.625 in 0.20 lb 6 

■■Chrome/Nickel Plated for Longer Life 

■■Industrial Tool Steel Bits, Heat Treated, Tempered, 

Stress Relieved 

6-in-1 Interchangeable Bit Screwdriver 


CMB6V 037103150936 Boxed 0.36 lb 6 




■■Chrome/Nickel Plated for Longer Life 

■■Industrial Tool Steel Bits, Heat Treated, Tempered, 

Stress Relieved 

4-in-1 Interchangeable Bit Screwdriver 

8 


CMB4V 037103150929 Boxed 0.31 lb 6 




■■Includes Both Slotted and Phillips® Drivers 

■■Can Be Used for Jewelry Repair, Electronics Repair, and 

■■Detailed Work 

6 Pc. Precision Screwdriver Set 



SDPS6 037103203144 Boxed 0.44 lb 4 

865


■■3-7/8" Long Steel Shaft 

■■Wood Handle 

Wood Handle Scratch Awl 


73 037103463012 Bagged 3/32 in 3.875 in 1/4 in 6.625 in 0.20 lb 6 


■■Pocket Clip on Handle 

Pocket Clip Screwdrivers 




■■Chrome Plated Shafts: Provides Corrosion Resistance and Easy 






5 Pc. Dual Material, Hollow Shaft Nutdriver Set - SAE 



CND5SAE 037103256713 Carded 1.74 lb 


CND1V Dual Material Hollow Shaft Nutdriver 3/16 x 3" CND4V Dual Material Hollow Shaft Nutdriver 3/8 x 3" 

CND2V Dual Material Hollow Shaft Nutdriver 1/4 x 3" CND5V Dual Material Hollow Shaft Nutdriver 7/16 x 3" 

CND3V Dual Material Hollow Shaft Nutdriver 5/16 x 3" 

■■Chrome Plated Shafts: Provides Corrosion Resistance and Easy 






Dual Material, Hollow Shaft Nutdrivers - SAE 

Cat. No. UPC No. Packaging Fastener Size Shaft Length Overall Length Product Weight Shelf Pack Qty. 

CND1V 037103256768 Carded 3/16 in 3 in 9.45 in 0.21 lb 3 






866

P L I E R S 

Dual Material Pliers........................... 870 

Mini Pliers.......................................... 870 

Double-X Pliers.................................. 874 

Insulated Pliers.................................. 877 

Hose Clamp Pliers............................. 879 

Pinch Off Pliers.................................. 880 

Snap & Retaining Ring Pliers............ 881 

Dual Material Pliers........................... 886 

Locking Pliers.................................... 899 

Electrician’s Pliers / Wire Strippers. 901 

Retaining Ring Pliers......................... 904 

Wire Twisting Pliers.......................... 911 

9 

Tongue & Groove Pliers..................... 914 

Slip Joint Pliers................................. 915 

Solid Joint Pliers............................... 917 

P L I E R S 

Compound Action Pliers.................... 924 

Locking Pliers.................................... 925 

(Option B) 

867

P L I E R S 

DOUBLE-X 

PLIERS 

Compound joint allows 

access with minimal 

handle movement 

Pliers 

GearWrench ® offers a broad range of pliers to meet the needs of most industrial applications. Ergonomic design, quality materials 

and precision assembly produce a tool that will get the job done for years to come. 

GearWrench ® delivers innovation with the Double-X, double joint pliers that allow the plier to reach where others can’t. The two 

pivot points act to allow the jaws to open greater than the handles that means better access to more places. They are constructed 

of corrosion resistant alloy steel for long life and have dual-dipped grips for user comfort. 

Flush rivet for strength and 

narrow profile 

Aligned serrated tips 

for precision gripping 

Jaws open greater distance 

than the handle for added 

reach in tight locations 

Dual-dipped for 

comfort and grip 

Maximum reach without exceeding 

center point of interference 

AVAILABLE IN: 

• Straight Standard Pliers 

• 45° Standard Pliers 

• Duck Bill Standard Pliers 

• Internal / External Snap Ring Pliers 

• Straight Hemostat Pliers 

• 45° Hemostat Pliers 

Slim head design 

P L I E R S 9 

DUAL MATERIAL 

GRIP PLIERS 

Solid flush rivet for better 

access and tighter tolerance 

Cross-over wire cutting jaws 

Exclusive rounded inside 

edges for comfort 

Curved back handles for added 

leverage and less slip 

Slim handle design; 

recessed at top 

Curved gripping jaws 

for select usage 

AVAILABLE IN: 

• Slip Joint Pliers 

• Diagonal Pliers 

• Bent Nose Pliers 

• Long Nose Pliers 

• Linesmans Pliers 

• Groove Joint Pliers 

“Finger tipping” 

end texture grips for access 

868

P L I E R S 

Pliers 

Armstrong ® offers a wide variety of professional pliers for just about any gripping, cutting, bending, turning, stripping, and 

specialty applications. All Armstrong pliers are made to exacting standards with ASME and Federal Spec callouts where applicable. 

They also incorporate professional quality features. All handles and grips are designed to maximize gripping power and comfort, while 

jaws are designed to maximize gripping and cutting power. In addition, superior design, materials, and heat treat optimize durability 

and strength. Whether it be solid joint, slip joint, retaining ring or aviation pliers, these tools can handle just about any application. 

TONGUE & GROOVE 

PLIERS 

Precision-milled undercut rib joint provides positive 

interlock between two halves eliminating separation 

Textured black over “Armstrong Blue” double dip 

grips provide an added layer of Non-slip material 

for working comfort and non-slip performance 

Specially designed fastener ensures permanent 

plier assembly with smooth operation 

Jaws incorporate angled 

teeth which provide superior 

gripping power over standard 

style vertical teeth 

Manufactured from high alloy steel using the most up-to-date 

manufacturing process and heat treat for greater strength and durability 

Pliers 

Crescent ® brand locking pliers are made to an exacting standard that results in improved durability and long-term performance. In 

fact, they meet stringent ASME standards B107.24 and B107.36, as applicable, for product specifications, including strength and 

maximum jaw opening capacity. Yet, as strong as they are, Crescent ® brand locking pliers still maintain the narrow profile required 

for work in tight and confined spaces. 

Long nose, curved, and straight jaw pliers feature a patented angled tooth pattern for a better grip, and every style has a tough 

nickel-plated finish for maximum resistance to rust and corrosion. 

9 

LOCKING 

PLIERS 

Integral wire cutter on curved 

jaw and long nose styles 

Compound action for powerful 

non-slip locking grip 

Nickel-plated finish resists 

rust and corrosion 

P L I E R S 

Patented angled tooth pattern 

provides better grip 

869

P L I E R S 

■■Forged From Premium Alloy Steel 

■■Precision Machined for Exact Tolerances and Fit 

■■Slim Handle and Head Design 

■■Curved Back Handles for Added Leverage and Less Slip 

■■Exclusive Rounded Inside Edges for Comfort 

■ ■"Finger Tipping" End Texture Grips for Access 

7 Pc. Mixed Pliers Set 


82108 099575821080 Boxed 6.63 lb 1 


82011 9-1/2" Tongue and Groove Pliers 82020D 12" Groove Joint Pliers with Straight Jaw 

82012 7" Diagonal Cutting Pliers 82025 8" Lineman Pliers 

82013 8" Long Nose Pliers 82028 8" End Cutting Nipper Pliers 







■ ■"Finger Tipping" End Texture Grips for Access 

4 Pc. Mixed Pliers Set 

P L I E R S 9 


82103 099575821035 Carded 3.09 lb 1 


82011 9-1/2" Tongue and Groove Pliers 82013 8" Long Nose Pliers 

82012 7" Diagonal Cutting Pliers 82014 8" Slip Joint Pliers 

■■Dual Material Handles for Comfort and Performance 

■■Mini Screwdrivers feature a "Speed Zone" for Turning in Lower 


■■Mini Pliers Feature a Slim Head Design with a Solid Flush Rivet 

for Better Access and Tighter Tolerance 

8 Pc. Mini Screwdriver and Pliers Set 


80058 099575800580 Carded 1.10 lb 1 




80033 Dual Material Phillips® Screwdriver #1 x 60 mm 82000D 5" Mini Diagonal Cutting Pliers 

80034 Dual Material Slotted Screwdriver 1.5mm x 60 mm 82001 5" Mini Long Nose Pliers 

870

P L I E R S 

■■Slim Head Design 

■■Solid Flush Rivet for Better Access and Tighter Tolerance 


5 Pc. Mixed Mini Pliers Set 


82100 099575821004 Carded 0.99 lb 1 


82000D 5" Mini Diagonal Cutting Pliers 82003 4-1/4" Mini End Cutting Nipper Pliers 

82001 5" Mini Long Nose Pliers 82004 5-1/4" Mini Flat Nose Pliers 

82002D 5" Mini Needle Nose Pliers 


■■Cross-Over Wire Cutting Jaws 


■■Slim Handle Design Recessed at Top 


Slip Joint Pliers 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Jaw 

Capacity 

Jaw Type 

82014 099575820144 Carded 8.15 in 1.72 in 1.24 in 0.14 in 3.13 in Curved Yes 0.60 lb 1 

Wire 

Cutter 

Product 

Weight 

Shelf Pack 

Qty. 

9 

■■Curved Jaws for Gripping Rounded Objects 






Tongue and Groove Pliers 


Overall 

Length Jaw Length Jaw Width 

Jaw 

Thickness Jaw Type Wire Cutter 

82011 099575820113 Carded 9.45 in 1.61 in 0.73 in 0.41 in Curved No 0.84 lb 1 

■■Straight Jaws for Gripping Parallel Surfaces 






Groove Joint Pliers with Straight Jaw 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Jaw 

Capacity 

Jaw Type 

82020D 099575820205 Carded 11.85 in 2.09 in 0.65 in 0.47 in 1.09 in Straight No 1.45 lb 1 

Wire 

Cutter 

Product 

Weight 

Shelf Pack 

Qty. 

871

P L I E R S 





Diagonal Cutting Pliers 

Cat. No. UPC No. Packaging Application 

Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82012 099575820120 Carded Heavy Duty 7.01 in 1.12 in 1.2 in 0.46 in Standard 1.12 in 0.63 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 





Long Nose Pliers 


Overall 


Jaw 


82013 099575820137 Carded 8.23 in 3.28 in 0.84 in 0.42 in Standard Yes 0.64 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 






Lineman's Pliers 

Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82025 099575820250 Carded Heavy Duty 8.03 in 2.14 in 1.13 in 0.48 in Standard 5/8 in 0.78 lb 1 



End Cutting Nipper Pliers 

Product 

Weight 

Shelf Pack 

Qty. 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82028 099575820281 Carded Heavy Duty 7.8 in 0.59 in 1.17 in 1.02 in Standard 1.02 in 0.80 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

872

P L I E R S 




■■Spring Keeps Handles Open 

Mini Diagonal Cutting Pliers 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82000D 099575820007 Carded Mini 4.45 in 0.51 in 0.33 in 0.51 in Mini 0.51 in 0.09 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 





Mini Long Nose Pliers 

Cat. No. UPC No. Packaging Overall Length Jaw Length Jaw Width 

Jaw 

Thickness 

Edge Type/Cut 

Capacity 

82001 099575820014 Carded 5.2 in 1.47 in 0.5 in 0.33 in Yes 0.09 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 





Mini Needle Nose Pliers 

9 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

82002D 099575820021 Carded 5.59 in 1.84 in 0.5 in 0.33 in No 0.09 lb 1 





Mini End Cutting Nipper Pliers 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82003 099575820038 Carded Mini 4.25 in 0.51 in 0.5 in 0.51 in Standard 0.51 in 0.09 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

873

P L I E R S 





Mini Flat Nose Pliers 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82004 099575820045 Carded Mini 5.2 in 1.47 in 0.5 in 0.33 in Standard N/A 0.09 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

■■Compound Joint Allows Access with Minimal Handle Movement 

■■Flush Rivet for Strength and Narrow Profile 

■■Maximum Reach Without Exceeding Center Point of Interference 

■■Jaws Open Greater Distance Than the Handle for Added Reach 

in Tight Locations 

2 Pc. Double-X Pliers Set 


82106 099575821165 Carded 1.81 lb 1 

P L I E R S 9 


82005D Straight Double-X Pliers 82006D 45 Degree Double-X Pliers 






3 Pc. Double-X Hose Grip Pliers Set 


82107 099575821172 Carded 3.07 lb 1 


82017 5/16" Diameter Hose Grip Double-X Pliers 82019 3/4" Diameter Hose Grip Double-X Pliers 

82018 1/2" Diameter Hose Grip Double-X Pliers 

874

P L I E R S 

■■Interchangeable Straight and 90 Degree Tips 

■■Corrosion Resistant Alloy Steel 






2 Pc. Double-X Internal/External Snap Ring 

Pliers Set 


82110 099575821103 Carded 2.14 lb 1 


82032 Double-X Internal Snap Ring Pliers 315177 

82033 Double-X External Snap Ring Pliers 

Tip Set: 0.038" Straight; 0.038" 90 Degree, 0.047" Straight, 0.047" 90 Degree, 0.070" Straight, 2 mm 

Hex Key 

■■Straight or 45 Degree Tips 

■■Compound Joint 

■■Stainless Steel 

■■Locking Function 

2 Pc. Double-X Hemostat Pliers Set 

9 


82111 099575082115 Carded 0.65 lb 1 


82034 Double-X Straight Hemostat Pliers 82035 Double-X 45 Degree Hemostat Pliers 






■■Aligned Serrated Tips for Precision Gripping 

Straight Double-X Pliers 

P L I E R S 

Cat. No. UPC No. Packaging Overall Length Jaw Length Jaw Width Jaw Thickness Product Weight Shelf Pack Qty. 

82005D 099575820151 Carded 13.46 in 3.15 in 0.68 in 0.39 in 0.94 lb 1 

875

P L I E R S 







45 Degree Double-X Pliers 


82006D 099575820168 Carded 13.27 in 2.95 in 0.68 in 0.39 in 0.93 lb 1 







Duckbill Double-X Pliers 


82007 099575820175 Carded 11.97 in 1.65 in 0.68 in 0.39 in 0.89 lb 1 

P L I E R S 9 






Hose Grip Double-X Pliers 


Jaw 

Thickness 

Jaw Capacity 

82017 099575821073 Carded 13.19 in 2.87 in 0.68 in 0.39 in 5/16 in 0.96 lb 1 









■■Tip Set: 0.038" Straight; 0.038" 90 Degree, 0.047" Straight, 

0.047" 90 Degree, 0.070" Straight, 2 mm Hex Key 

Internal Snap Ring Double-X Pliers 

Product 

Weight 

Shelf Pack 

Qty. 



876

P L I E R S 







■■Tip Set: 0.038" Straight; 0.038" 90 Degree, 0.047" Straight, 

0.047" 90 Degree, 0.070" Straight, 2 mm Hex Key 

External Snap Ring Double-X Pliers 



■■Straight Tips 


■■Compound Action 


Straight Hemostat Double-X Pliers 



■■45 Degree Tips 


■■Compound Action 


45 Degree Hemostat Double-X Pliers 

9 



■■Insulated Pliers and Screwdrivers Are 1000 Volt Rated 

■■100% Tested for Reliability 

10 Pc. Insulated Pliers and Screwdriver Set 

P L I E R S 


80062 099575800627 Boxed 3.50 lb 1 


80047 Insulated Slotted Screwdriver 3/32" x 3" 82029 8" Lineman Insulated Pliers 

80048 Insulated Slotted Screwdriver 5/32" x 4" 82030 8" Long Nose Insulated Pliers 

80049 Insulated Slotted Screwdriver 7/32" x 5" 82031 7" Diagonal Cutting Insulated Pliers 

80084 Insulated Pozidriv® Screwdriver #1 x 3-1/8” 80081 Insulated Phillips® Screwdriver #1 x 3-1/8" 

80085D Insulated Pozidriv® Screwdriver #2 x 4” 80082 Insulated Phillips® Screwdriver #2 x 4" 

877

P L I E R S 





■■Insulated Pliers Are 1000 Volt Rated 


Lineman's Insulated Pliers 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82029 099575820298 Carded Electrical 8.31 in 2.22 in 1.22 in 0.51 in Standard 5/8 in 0.80 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 







Long Nose Insulated Pliers 


Overall 


Jaw 


82030 099575820304 Carded 8.39 in 3.26 in 0.87 in 0.43 in Standard Yes 0.60 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 








Diagonal Cutting Insulated Pliers 

Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

82031 099575820311 Carded Electrical 8.31 in 2.22 in 1.22 in 0.51 in Standard 2.22 in 0.60 lb 1 

■■Loosen and Tighten Nuts on Battery Terminal Clamps 

■■Offset Handles for Working in Cramped Areas 

■■Serrated Jaws Provide Firm Grip 

Battery Nut Pliers 

Product 

Weight 

Shelf Pack 

Qty. 


203D 082171002038 Carded 0.45 lb 1 

878

P L I E R S 

■■Safely Remove Spark Plug Cables and Prevent Cable Damage 

Spark Plug Terminal Pliers 


135D 082171001352 Carded 0.53 lb 1 

■■All-Purpose Tool Includes Pliers Type Nose, Crimper, Wire 

Cutter, Stripper and Bolt Cutter 

■■Crimper Works on Insulated and Non-insulated Terminals. Noninsulated 

Auto 7 & 8mm, and Electrical 22-20 to 22-10. Insulated 

Electrical 22-20 to 12-10. 

■■Bolt Cutters for Bolt Sizes 4-40, 5-40, 6-32, 8-32, 

10-32 and 10-24 



2162D 082171021626 Carded 0.50 lb 1 

■■For Use on Hose Clamps - Flat Band 

■■Easy to Use Locking Feature 

■■Dual Dipped for Additional Comfort 

Straight Hose Clamp Pliers 

9 


3976D 082171397608 Carded 0.75 lb 1 


■■Angled Jaws Give Improved Access Around Obstructions 



Angled Hose Clamp Pliers 

P L I E R S 


3977 082171397707 Carded 0.84 lb 1 

879

P L I E R S 

■■For Corbin Style Hose Clamps 

■■Plier Tips Trap and Hold Clamp, and Swivel for Multiple 

Angle Access 



Corbin Style Hose Clamp Pliers 


3975D 082171397509 Carded 0.74 lb 1 

■■For Flat Ear Style Hose Clamps 

■■Plier Tips Trap and Hold Clamp, and Swivel for Multiple 

Angle Access 



Heavy-Duty Large Hose Clamp Pliers 


3978D 082171397806 Carded 0.85 lb 1 

P L I E R S 9 

■■Pliers Eliminate the Need to Drain Cooling System 

When Servicing 

■■Pliers Squeeze Hoses Shut and Jaws Swivel for 

Parallel Clamping 

■■Automatic Locking Ratchet 

■■Do Not Use on Wire-Reinforced Hose 

Hose Pinch Off Pliers 


145 082171001451 Carded 0.85 lb 1 

■■Ideal for Use on Radiator Hoses, Heater Hoses, Water, Air, 

Vacuum and Fuel Lines 

■■Capacity 3/4" Outside Diameter 

■■Extra Long Cushioned Hand Grips for Comfort and Control 

■■Clamping Mechanism Locks Automatically - No Screws or 

Levers to Set or Adjust 

■■Black Oxide Coated to Resist Rust and Corrosion 

Small Hose Pinch-Off Pliers, 3/4" O.D. Capacity 

Cat. No. UPC No. Packaging Length Jaw Capacity Product Weight Shelf Pack Qty. 

3791 082171037917 Carded 5-1/2 in 3/4 in 0.43 lb 1 

880

P L I E R S 



■■Capacity 1-1/4" Outside Diameter 





Medium Hose Pinch-Off Pliers, 1-1/4" 

O.D. Capacity 


3792D 082171037924 Carded 9-1/4 in 1-1/4 in 0.75 lb 1 








Large Hose Pinch-Off Pliers, 2-1/2" O.D. Capacity 


3793 082171037931 Carded 14 in 2-1/2 in 1.24 lb 1 

Lock-Ring Pliers 

■■Remove and Install Snap Rings Without Holes Used on Brakes, 

Transmissions, Pedal and Clutch Shafts 

■■Scored Jaws Securely Hold Rings 

9 


2534D 082171025341 Carded 0.45 lb 1 

■■Remove and Install Heavy-Duty Internal Snap Rings From 

2-7/16" to 3-1/2" and External Snap Rings From 1-1/2" to 4" 

in Diameter 

■■Points Lock Securely in Jaws 

■■Screw-Type Design Maintains Jaw Position During Use 

■■Includes 3 Pairs of Interchangeable Points 

Heavy-Duty Combination Snap Ring Pliers 

P L I E R S 

Cat. No. UPC No. Packaging Length Includes Tips Dia./ Angle Product Weight Shelf Pack Qty. 

2012D 082171020124 Carded 9-1/2 in 0.108" Dia. 15° Angle, 0.108" Dia. 45° Angle and 0.123" Dia 45° Angle 1.30 lb 1 

881

P L I E R S 

■■For Heavy-Duty Snap Ring Pliers 454, 455, 456 and 2012D 

■■Includes 3 Pairs of Interchangeable Points and 1 Pair of Points 

Clamps With 2 Screws 

■■Requires 3/32" Hex Key When Replacing Points 

3 Pairs of Heavy-Duty Interchangeable Points Set 

Cat. No. UPC No. Packaging Includes Tips Dia./ Angle Product Weight Shelf Pack Qty. 

457 082171004575 Carded 0.108" Dia. 15°, 0.108" Dia. 45°, & 0.123" Dia. 45° 0.10 lb 1 

■■Remove and Install Internal and External Snap Rings 

■■Tips Spread Up to 1-1/4" 

■■Tip Diameter 0.070" 

Combination Snap Ring Pliers 

Cat. No. UPC No. Packaging Tip Description Product Weight Shelf Pack Qty. 

1715D 082171017155 Carded Tip Diameter 0.070" 0.10 lb 1 

P L I E R S 9 

■■Remove and Install Internal Snap Rings From 3/8" to 1-3/4" 

in Diameter 



■■Use Replacement Points Sets 447 and 448DD 

Internal Snap Ring Pliers 


445 082171004452 Carded 

■■Remove and Install External Snap Rings From 1/4" to 1-7/16" 

in Diameter 



■■Use Replacement Points Sets 447 and 448DD 

0.039" Dia. 15° Angle; 0.048" Dia. 15° Angle; 0.074" Dia. 15° Angle; 0.039" Dia. 45° 

Angle; 0.047" Dia. 90° Angle; 

External Snap Ring Pliers 

0.35 lb 1 


446D 082171004469 Carded 

0.039" Dia. 15° Angle; 0.048" Dia. 15° Angle; 0.074" Dia. 15° Angle' 0.039" Dia. 45° 

Angle & 0.047" Dia. 90° Angle 

0.35 lb 1 

882

P L I E R S 

■■For Snap Ring Pliers 445, 446D 

■■Includes 5 Pairs of Interchangeable Points & 1 Pair of Point 

Clamps With 2 Screws 


5 Pairs of Interchangeable Points Set 


447 082171004476 Carded 

1 Pair of Each Included: 0.039" Dia. 15°, 0.047" Dia. 15°, 0.074" Dia. 15°, 0.039" Dia. 

45° & 0.047" Dia 90° Angle 

0.06 lb 1 

■■For Snap Ring Pliers 445, 446D 

■■Includes 9 Pairs of Interchangeable Points & 2 Retaining Screws 


9 Pairs of Interchangeable Points Set 


448DD 082171004483 Carded 

1 Pair of Each Included: 0.039" Dia. 15°, 0.047" Dia. 15°, 0.074" Dia. 15°, 0.039" Dia. 

45°, 0.047 Dia. 45°, 0.074" Dia. 45°, 0.039" Dia 90°, 0.047" Dia 90° & 0.074" 90° Angle 

0.08 lb 1 

■■Patented Design Allows Quick Change-Over From Internal 

to External Ring Applications 

■■To Change - Push Button on Knob and Rotate 

■■Fits Internal and External Rings From 1/4" to 2" 

■■Cushion Grip Handles for Comfort 

■■Comes in Custom Molded Storage Case 

■■Includes Popular Tip Diameters 

6 Pc. Cam-Lock Style Convertible Snap Ring 

Pliers Set 

9 


3859D 082171038594 Blow Mold Case 0.038", 0.047" and 0.070" in 18° and 90° Angled" Tips 0.40 lb 1 

P L I E R S 

883

P L I E R S 

■■Set Includes the Four Most Popular Tip Sizes 

■■Designed for the Removal and Installation of Either Internal 

or External Snap Rings 

■■Features Cushion Dipped Handles for Comfort 

■■Set Is Packaged in a Durable Plastic Storage Case 

12 Pc. Fixed Tip Combination Snap Ring Pliers Set 


3495 082171034954 Blow Mold Case 0.038", 0.047", 0.070" and 0.090" in Straight, 45° and 90° Angle 5.15 lb 1 


3483DD Fixed Tip / Combination Snap Ring Pliers / 0.038 / straight 3489 Fixed Tip / Combination Snap Ring Pliers / 0.070 / straight 

3484D Fixed Tip / Combination Snap Ring Pliers / 0.038 / 45 degree 3490D Fixed Tip / Combination Snap Ring Pliers / 0.070 / 45 degree 

3485D Fixed Tip / Combination Snap Ring Pliers / 0.038 / 90 degree 3491 Fixed Tip / Combination Snap Ring Pliers / 0.070 / 90 degree 

3486 Fixed Tip / Combination Snap Ring Pliers / 0.047 / straight 3492 Fixed Tip / Combination Snap Ring Pliers / 0.090 / straight 

3487 Fixed Tip / Combination Snap Ring Pliers / 0.047 / 45 degree 3493 Fixed Tip / Combination Snap Ring Pliers / 0.090 / 45 degree 

3488D Fixed Tip / Combination Snap Ring Pliers / 0.047 / 90 degree 3494 Fixed Tip / Combination Snap Ring Pliers / 0.090 / 90 degree 

P L I E R S 9 

■■Versatile, Heavy Duty Pliers Designed for the Removal and 

Installation of Either Internal or External Snap Rings on a Wide 

Range of Applications 

■■Feature a Cushion Dipped Handle and are Designed for Heavy 

Duty Use 

Snap Ring Pliers, Fixed Tip 


3483DD 082171034831 Bagged 0.038" Straight 0.16 lb 1 

3484D 082171034848 Bagged 0.038" 45° 0.16 lb 1 

3485D 082171034855 Bagged 0.038" 90° 0.16 lb 1 

3486 082171034862 Bagged 0.047" Straight 0.16 lb 1 

3487 082171034879 Bagged 0.047" 45° 0.16 lb 1 

3488D 082171034886 Bagged 0.047" 90° 0.16 lb 1 


3490D 082171034909 Bagged 0.070" 45° 0.27 lb 1 

3491 082171034916 Bagged 0.070" 90° 0.27 lb 1 


3493 082171034930 Bagged 0.090" 45° 0.50 lb 1 

3494 082171034947 Bagged 0.090" 90° 0.50 lb 1 

884

P L I E R S 

■■For Up to 1.0" Diameter Rings 

■■Easily Convert From Internal to External Rings By Moving Levers. 

No Pins to Push 

■■Hex Shaped Locking Guides Firmly Hold Tips 

■■Ergonomic Anti-Slip Sealed Air Pocket Grips for Comfort 

■■Spring Loaded for Faster Work 

■■Includes: 5 Pairs of Color Coded Tips & Hex Wrench 

■■Replacement Tip Set Part: 315077 

Universal Convertible Retaining Ring Pliers, Small 


3150D 082171031502 Carded 0.024", 0.038", 0.038" 90°, 0.047", 0.047" 90° 0.30 lb 1 

■■For Up to 2.0" Diameter Rings 

■■Easily Convert From Internal to External Rings By Moving Levers. 

No Pins to Push 

■■Hex Shaped Locking Guides Firmly Hold Tips 

■■Ergonomic Anti-Slip Sealed Air Pocket Grips for Comfort 

■■Spring Loaded for Faster Work 


Universal Convertible Retaining Ring Pliers, Large 


3151 082171031519 Carded 0.038", 0.038" 90°, 0.047", 0.047" 90°, 0.070" 0.60 lb 1 

■■For Use on Internal Rings 1-13/16" to 4" and External Rings 

1-1/2" to 4" 

■■Easily Convert From Internal to External Use on Snap Rings With 

the Push-Button Feature 

■■Ratchet Lock Holds the Snap Ring in Desired Position 

■■Cushion-Grip Handles for Comfort 


Universal Convertible Retaining Ring Pliers, 

Extra Large 

9 


3152D 082171031526 Carded 0.090" 15° & 90°, 0.108" 15° & 90° , and 0.120" 15° & 90° Tips 1.20 lb 1 

P L I E R S 

885

P L I E R S 

Tongue and Groove Pliers 


■■Precision-Milled Undercut Rib Joint Provides Positive Interlock 

Between Two Halves Eliminating Separation 

■■Jaws Incorporate Angled Teeth Which Provide Superior Gripping 

Power Over Standard Style Vertical Teeth 

■■Specially Designed Fastener Ensures Permanent Plier Assembly 

with Smooth Operation 

■■Textured Black Over Blue Double Non-Slip Dip Grips for 

Working Comfort 





Overall 


Jaw 


67-717* 781412677171 Bagged 5.000 in 1.000 in 0.750 in 0.188 in Straight No 0.17 lb 1 



67-781~ 781412677812 Bagged 12.000 in 1.938 in 2.500 in 0.517 in Straight No 1.91 lb 1 

67-783~ 781412677836 Bagged 16.000 in 4.500 in 2.313 in 0.594 in Straight No 2.61 lb 1 

67-785 781412677850 Bagged 20.000 in 4.750 in 3.750 in 0.625 in Straight No 3.80 lb 1 

* Meets or Exceeds ASME B107.23m; ~ Meets or Exceeds US Federal Spec. GGG-P-471e 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 


■■Pipe Wrench Head Design with A 90 Degree Offset Provides 

■■up to 20% More Leverage 

■■Precision-Milled Undercut Rib Joint Provides Positive Interlock 

Between Two Halves Eliminating Separation 











Pipewrench Tongue and Groove Pliers 

Overall 


Jaw 





■■Thin Profile for Hard-to-Reach Areas 






Midget Angle Nose Ignition Pliers 

Product 

Weight 

Shelf Pack 

Qty. 


Overall 


Jaw 



Product 

Weight 

Shelf Pack 

Qty. 

886

P L I E R S 

Battery Pliers 







67-831 781412678314 Bagged 0.46 lb 1 

Slip Joint Pliers 


■■Curved Portion of Serrated Jaws Are Designed for Gripping 

and Turning Round Objects Such as Pipes, Rods and Pins; Flat 

Portion of Serrated Jaws at the Tip for Gripping Flat Objects 

■■Two Jaw Positions with Shear-Type Wire Cutter 










Overall 


Jaw 


Product 

Weight 

Shelf Pack 

Qty. 

67-667 781412676679 Bagged 6.500 in 1.913 in 1.313 in 0.390 in Curved Yes 0.51 lb 1 



9 

Slip Joint Pliers, Plain Handle 








■■Knurled Handles 




P L I E R S 


Overall 


Jaw 


Product 

Weight 

Shelf Pack 

Qty. 




887

P L I E R S 

Slip Joint Pliers, Thin Nose 


■■Thin Profile for Hard-to-Reach Areas 













Overall 

Jaw 


Cat. No. UPC No. Packaging Length Jaw Length Jaw Width Thickness Jaw Type Wire Cutter Weight Qty. 

67-687 781412676877 Bagged 6.500 in 1.813 in 1.313 in 0.215 in Thin Curved Yes 0.73 lb 1 

P L I E R S 9 

Hose Clamp Pliers 


■■Quickly Installs and Removes Spring Tension Hose Clamps 

■■Grips with Either Side of the Jaws with Two Jaw Positions for 

Ideal Pressure on the Clamp 









Overall 

Jaw 



67-699 781412676990 Bagged 8.000 in 2.063 in 1.406 in 0.390 in Notched Curved Yes 0.70 lb 1 

888

P L I E R S 


■■High Leverage Design - Joint Rivet is Closer to the Cutting 

Edges to Provide More Cutting Power Than General 

Purpose Pliers 

■■Extra Long Handle Improves High Leverage Cutting Capabilities 

■■Extra Wide Handles Provide More Comfort and Reduces 

Hand Fatigue 

■■Angled Head Design Provides Access to Some 

■■Hard-to-Reach Areas 

■■Precision Machined Cutting Edges Are Beveled for Close Cutting 

and Induction Hardened for Long-Lasting Sharpness 


■■Solid Flush Rivet for Smooth Action and No Handle Wobble 

When Cutting 







Long Reach Diagonal Cutting Pliers, High Leverage, 

Angled Head 

Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

67-101 781412671018 Bagged High Leverage 11.125 in 1.000 in 1.156 in 0.468 in Standard 1.02 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 





■■Angled Head Design Provides Access to Some 

Hard-to-Reach Areas 

■■Precision Machined Cutting Edges Are Beveled for Close Cutting 

and Induction Hardened for Long-Lasting Sharpness 



When Cutting 








Diagonal Cutting Pliers, High Leverage, Angled Head 

Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 


Product 

Weight 

Shelf Pack 

Qty. 

9 

P L I E R S 

889

P L I E R S 





■■Precision Machined Cutting Edges Are Beveled for Close 

Cutting and Induction Hardened for Long-Lasting Sharpness 



When Cutting 







Diagonal Cutting Pliers, High Leverage 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Product 

Weight 

Shelf Pack 

Qty. 



P L I E R S 9 


■■The Joint Rivet is Located Closer to the Cutting Edges to Provide 

More Cutting Power Than Standard Diagonal Pliers 

■■Extra Long Handle Improves Access to Some 

■■Hard-to-Reach Areas 


■■Cutting and Induction Hardened for Long-Lasting Sharpness 


■■Jaws Have Serrated Gripping Tips for Gripping and Twisting 


When Cutting 







Long Reach Diagonal Cutting Pliers 

Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 


Product 

Weight 

Shelf Pack 

Qty. 

890

P L I E R S 

Diagonal Cutting Pliers 






When Cutting 

■■Textured Black Over Blue Double Non-Slip Dip Grips for Working 

Comfort 






Jaw 

Thickness 

Edge Type/Cut 

Capacity 

Product 

Weight 

Shelf Pack 

Qty. 

67-155 781412671551 Bagged 4.250 in 0.563 in 0.438 in 0.250 in Standard 0.12 lb 1 









■■Pliers Have A Spring Which Returns the Jaws Automatically 

to the Open Position After the Cut is Made to Reduce 

■■Operator Fatigue. 


When Cutting 







Diagonal Cutting Pliers with Spring 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Product 

Weight 

Shelf Pack 

Qty. 

67-183 781412671834 Bagged Repetition 4.468 in 0.563 in 0.438 in 0.250 in Standard 0.22 lb 1 



9 

P L I E R S 

891

P L I E R S 


■■Extremely Sharp Cutting Edges Make A Flush Cut That Leaves 

a Smooth, Finished Edge - They Are Not Intended for Cutting 

Metal or Wire. 





When Cutting 






Diagonal Cutting Pliers, Plastic Cutting with Spring 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Product 

Weight 

Shelf Pack 

Qty. 

67-195 781412671957 Bagged Plastic 6.375 in 0.875 in 0.750 in 0.375 in Standard 0.36 lb 1 

67-197 781412671971 Bagged Plastic 7.438 in 1.125 in 0.888 in 0.438 in Standard 0.50 lb 1 

P L I E R S 9 

Lineman’s Pliers 


■■High Leverage Design—The Joint Rivet is Closer to the Cutting 



■■Precision Machined Cutting Beveled Cutting Edges Meet at the 

Hinge for Improved Cutting Performance 

■■Induction Hardened Cutting Edges for Extended Life 

■■Jaws Have Diamond Serrated Gripping Tips for Gripping 

and Twisting 


When Cutting 








Overall 

Length 

Jaw 

Length Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Product 

Weight 

Shelf Pack 

Qty. 

67-063 781412670639 Bagged Heavy Duty Electrical 6.438 in 1.000 in 0.938 in 0.438 in Standard 0.49 lb 1 




892

P L I E R S 

Ironworker's Plier 


■■Designed for Cutting and Twisting Rebar Tie Wire 

■■Plier Has A Curved Handle End That Stops the Plier From 

Slipping Through the Operators Hand. 

■■High Leverage Design—The Joint Rivet is Closer to the Cutting 







and Twisting 


When Cutting 





67-071 781412670714 Bagged 

Curved Handle for 

Gripping 

Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Product 

Weight 

Shelf Pack 

Qty. 

9.500 in 1.500 in 1.300 in 0.600 in Standard 1.07 lb 1 









and Twisting 


When Cutting 








End Cutting Plier, High Leverage 

Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting 

Edge Length 

67-535 781412675351 Bagged 7.500 in 0.375 in 1.625 in 0.500 in Standard 1.625 in 0.41 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

9 

P L I E R S 

893

P L I E R S 

Long Reach Chain Nose Pliers 


■■Extra Long Handle Improves Access to Hard-to-Reach Areas 

While Providing More Holding Power at the Tip with Less Effort 

■■Slim Tapered Nose Design for Working in Confined Areas 


and Twisting 


When Cutting 







Overall 


Jaw 

Thickness 

Cutting 

Edge Length 

67-240 781412672404 Bagged Straight 11.563 in 2.813 in 0.718 in 0.406 in 0.406 in 0.69 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 


■■Extra Long Handle Improves Access to Hard-to-Reach Areas 

While Providing More Holding Power at the Tip with Less Effort 

■■Slim Tapered Bent Nose Design for Working 

Around Obstructions 


and Twisting 


When Cutting 







Long Reach Chain Nose Pliers, Bent 

Overall 


Jaw 

Thickness 

Cutting 

Edge Length 

67-241 781412672411 Bagged Bent 11.375 in 2.563 in 0.718 in 0.406 in 0.406 in 0.70 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

894

P L I E R S 



■■Cutting and Induction Hardened for Long-Lasting Sharpness 




and Twisting 


When Cutting 








Chain Nose Pliers with Wire Cutter 

Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Cutting Edge 

Length 

67-303 781412673036 Bagged Straight 5.625 in 1.500 in 0.688 in 0.375 in 0.375 in Yes 0.24 lb 1 



Wire 

Cutter 

Product 

Weight 

Shelf Pack 

Qty. 

Chain Nose Pliers 




and Twisting 


When Cutting 








Overall 


Jaw 

Thickness 

Cutting 

Edge Length 





Product 

Weight 

Shelf Pack 

Qty. 

9 

P L I E R S 

895

P L I E R S 


■■Built in Wire Stripper Fro the Removal of Wire Insulation 



and Twisting 


When Cutting 








Chain Nose Pliers with Wire Stripper 

Overall 


Jaw 

Thickness 

Cutting 

Edge Length 


Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 

Chain Nose Pliers, Bent 


■■Slim Tapered Bent Nose Design for Working 

Around Obstructions 


and Twisting 


When Cutting 








Overall 


Jaw 

Thickness 

Cutting 

Edge Length 

67-401 781412674019 Bagged Bent 5.875 in 1.313 in 0.688 in 0.375 in 0.375 in 0.75 lb 1 

Needle Nose Pliers, Long Thin 


■■Long, Thin Needle Nose Design for Working in Extremely 

Confined Areas 


and Twisting 


When Cutting 







Product 

Weight 

Shelf Pack 

Qty. 


Overall 


Jaw 




Product 

Weight 

Shelf Pack 

Qty. 

896

P L I E R S 


■■Long, Thin Needle Nose Design for Working in Extremely 






and Twisting 


When Cutting 








Needle Nose Pliers, Long Thin with Spring 

Overall 


Jaw 



Product 

Weight 

Shelf Pack 

Qty. 


■■Extra Long, Thin Needle Nose Design for Working in Extremely 



and Twisting 


When Cutting 






Needle Nose Plier, Long Extra Thin 

9 


Overall 


Jaw 



Product 

Weight 

Shelf Pack 

Qty. 

Chain Nose Pliers, Long 


■■Longer Handle Improves Access to Hard-to-Reach Areas 



and Twisting 


When Cutting 







P L I E R S 


Overall 


Jaw 

Thickness 

Cutting 

Edge Length 


Product 

Weight 

Shelf Pack 

Qty. 

897

P L I E R S 

Flat Nose Pliers 


■■Flat, Wider Nose Design for More Gripping Surface When 

Working in Confined Areas 


and Twisting 


When Cutting 







Jaw 

Thickness 

Jaw Type 

67-441 781412674415 Bagged 6.500 in 2.063 in 1.625 in 0.500 in Straight 0.32 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 

Duckbill Pliers 


■■Flat, Wider Nose Design for More Gripping Surface When 

Working in Confined Areas 


and Twisting 


When Cutting 








Jaw 

Thickness 

Jaw Type 

67-503 781412675030 Bagged 8.000 in 1.375 in 0.500 in 0.375 in Straight 0.42 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

898

P L I E R S 


and Turning Round Objects Such As Pipes, Rods and Pins; Flat 


■■Straight Serrated Jaws Are Designed for Gripping, Holding, and 

Turning Flat Objects and Surfaces 

■■Slim Tapered Nose Design for Working in Confined Areas, 

Straight Serrated Jaws Are Designed for Gripping, Holding, and 




■■Integral Wire Cutter Built Into Back of the Jaws 

■■Wide Adjusting Screw for Adjusting the Jaw Opening and 

Locking Pressure 

■■Compound Action for Powerful Vice Like Grip 






3 Pc. Quick Release Locking Pliers Set 


67-404 781412674040 Boxed 2.95 lb 1 


67-405 5" Quick Release Locking Plier with Curved Jaw 67-460 10" Quick Release Locking Plier with Straight Jaw 

67-436 6" Quick Release Locking Plier with Long Nose - Tool Roll 


and Turning Round Objects Such As Pipes, Rods and Pins; Flat 













Curved Jaw Quick Release Locking Pliers 


Overall 


Jaw 


Product 

Weight 

Shelf Pack 

Qty. 




9 

P L I E R S 

899

P L I E R S 

■■Straight Serrated Jaws Are Designed for Gripping, Holding, and 













Straight Jaw Quick Release Locking Pliers 

Overall 


Jaw 


67-457 781412674576 Bagged 7.446 in 2.184 in 2.436 in 0.630 in Straight Yes 0.93 lb 1 


Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 

■■Slim Tapered Nose Design for Working in Confined Areas, 

Straight Serrated Jaws Are Designed for Gripping, Holding, and 














■■Right Angle Jaw Tips are Knurled on Outside Surface to Hold 

Rings 

■■Tension Spring Closes Jaws 

■■1-1/2" Maximum Jaw Opening 

Long Nose Quick Release Locking Pliers 

Overall 

Jaw 




Lock Ring Pliers, Standard Design 

Cat. No. UPC No. Packaging Overall Length Jaw Capacity Product Weight Shelf Pack Qty. 

67-555 781412675559 Bagged 9.000 in 1.500 in 0.58 lb 1 

900

P L I E R S 


■■Right Angle Jaw Tips are Knurled on Outside Surface to Hold 

Rings 

■■Tension Spring Closes Jaws 

■■1" Maximum Jaw Opening 

■■Meets or Exceeds US Federal Spec. GGG-P-471e 

Lock Ring Pliers, Parallel Jaws, Compound Leverage 

Cat. No. UPC No. Packaging Overall Length Jaw Capacity Product Weight Shelf Pack Qty. 

67-565 781412675658 Bagged 10.000 in 1.000 in 0.56 lb 1 

Cable Cutters 


■■For use with Copper or Aluminum Cable up to 2/0 Gauge 

■■Jamb Nut on Joint Helps Maintain Even Pressure on Inside 

Surface of Blades 

■■Ground Blades Cut Easily and Cleanly 

■■Cushion Grips for Comfort 

■■Not for use on Steel 


67-850 781412678505 Bagged 7.500 in 0.58 lb 1 


■■For Removal and Installation of Electrical Connectors 

■■Soft, Non-Marring Pliers Have Tongue and Groove Design 

Electrical Connector Pliers 

9 


67-852 781412678529 Bagged 10.000 in 1.00 lb 1 


■■Strips and Cuts 10-20 AWG Wire Sizes 

■■Handle Lock Protects Blade When Not in Use 

■■Precision Ground Stripping Stations for Accurate Stripping Down 

to the Conductor 

■■Easy to Read Wire Gauge Markings 


to the Open Position 

■■Narrow Nose with Serrated Teeth Permits Wire Pulling 

and Looping 

Wire Stripper/Cutter, with Lock and Spring Return 

P L I E R S 

Cat. No. UPC No. Packaging Overall Length Strips Wire Sizes, No. Wire Crimper Wire Cutter Product Weight Shelf Pack Qty. 

67-889 781412678895 Bagged 6.125 in 10, 12, 14, 16, 18, 20 No Yes 0.24 lb 1 

901

P L I E R S 









and Looping 

Wire Stripper/Cutter, with Spring Return 


67-891 781412678918 Bagged 6.125 in 22, 24, 26, 28, 30 No Yes 0.26 lb 1 



■■Easy Track Adjustment for Setting Up Strip Size 



Wire Strippers, with Spring Return 

P L I E R S 9 


67-895 781412678956 Bagged 5.250 in 10, 12, 14, 16, 18, 20 No Yes 0.21 lb 1 


■■Five Functions; Wire Stripper, Wire Cutter, Crimper, Bolt Cutter, 

and Plier 




■■Crimps Insulated and Non Insulated Terminals, Cuts Bolts 

Leaving a Perfect Lead Thread 



and Looping 

Electrician’s Stripper/Cutter/Crimper Pliers 


Overall 

Length 

Strips Wire 

Sizes, No. 

Crimps Wire 

Sizes, No. 

Cuts Bolt Sizes 

Wire 

Crimper 

Wire 

Cutter 

Product 

Weight 

Shelf 

Pack Qty. 

67-901 781412679014 Bagged 8.250 in 

10, 12, 14, 16, 

18, 20, 22 

Auto 7 & 8 mm, 

22-18, 16-10 

4-40, 5-40, 6-32, 8-32, 

10-32, 10-24 

Yes Yes 0.73 lb 1 

902

P L I E R S 



■■Crimps Insulated and Non Insulated Terminals, Cuts Bolts 

Leaving a Perfect Lead Thread 




■■Narrow Nose with Wire Cutter 



Overall 

Length 

Strips Wire 

Sizes, No. 

Crimps Wire 

Sizes, No. 

Cuts Bolt Sizes 

Wire 

Crimper 

Wire 

Cutter 

Product 

Weight 

Shelf 

Pack Qty. 

67-905 781412679052 Bagged 8.625 in 

10, 12, 14, 

16, 18, 20, 22 


22-14, 12-10 

4-40, 6-32, 8-32, 10-32, 

10-24 




■■Crimps Insulated and Non Insulated Terminals Including 

Weatherpack Terminals, Cuts Bolts Leaving a Perfect 

Lead Thread 




■■Anvil-Type Wire Cutter 


Cat. No. UPC No. Packaging Overall Length 

Strips Wire 

Sizes, No. 

Crimps Wire Sizes, 

No. Wire Crimper Wire Cutter 

Product 

Weight 

Shelf Pack 

Qty. 

9 

67-908 781412679083 Bagged 9.500 in 

10, 12, 14, 

16, 18 


10, 12, 14, 16, 18 


Ergo Super Stripper Cutter 


■■Strips and Cuts 10-18 AWG Solid Wire, 12-20 AWG Stranded 

Wire Sizes 

■■Cuts Bolts Leaving A Perfect Lead Thread 

■■Long Curved Handle Requires Less Force 



■■Handle Lock Protects Blade When Not in Use 



P L I E R S 

Cat. No. UPC No. Packaging Overall Length Strips Wire Sizes, No. 

67-910 781412679106 Bagged 7.250 in 

10-18 AWG solid wire, 

12-20 AWG stranded wire 

Cuts Bolt 

Sizes 

Wire 

Crimper 

Wire 

Cutter 

Product 

Weight 

Shelf Pack 

Qty. 

6-32, 8-32 No Yes 0.73 lb 1 

903

P L I E R S 

Romex Strippers 


■■Cuts Bolts Leaving A Perfect Lead Thread 





and Looping 


Overall 

Length 

Strips Wire Sizes, No. 

Cuts Bolt 

Sizes 

Wire 

Crimper 

67-912 781412679120 Bagged 7.750 in 12-2, 14-2 Type NM-B Cable 6-32, 8-32 No Yes 0.41 lb 1 

Wire 

Cutter 

Product 

Weight 

Shelf Pack 

Qty. 


■■For Use with External Retaining Rings Only 

■■Fixed Tips Are Precision Formed and Induction Hardened for 

Accurate Fit and Long Wear 


GGG-P-480E 

Retaining Ring Pliers, External 

P L I E R S 9 

Cat. No. UPC No. Packaging Overall Length Tip Description Product Weight Shelf Pack Qty. 

67-917 781412679175 Bagged 5.438 in 0.025" Tip, External, Straight 0.06 lb 1 


67-927 781412679274 Bagged 5.438 in 0.035" Tip, External, 90° 0.16 lb 1 



Retaining Ring Pliers, Internal 


■■For Use with Internal Retaining Rings Only 




GGG-P-480E 


67-965 781412679656 Bagged 5.523 in 0.025" Tip, Internal, Straight 0.14 lb 1 


67-973 781412679731 Bagged 5.438 in 0.035" Tip, Internal, 45° 0.14 lb 1 



904

P L I E R S 


■■For Use with Internal or External Retaining Rings 

■■Convertible; Fast and Easy, Make A 1/4 Turn to Release 

■■Halves, Position Into Alternative Slot, Another 1/4 Turn and 

■■it is Locked Together 



■■Can Be Used on 1/4" to 3-1/2" Retaining Rings 

12 Pc. Qtr-Turn Convertible Retaining Ring 

Pliers Set 


68-016 781412680164 Boxed 5.00 lb 1 


68-001 

68-002 

68-003 

68-004 

68-006 

68-009 

68-010 

0.038 Tip, Internal/External, Straight Retaining Ring Pliers 

- Qtr-Turn Convertible 

0.038 Tip, Internal/External, 45° Retaining Ring Pliers - 

Qtr-Turn Convertible 











68-012 0.090 Tip, Internal/External, 90° Retaining Ring Pliers - Qtr-Turn Convertible 

68-005D 0.047 Tip, Internal/External, 45° Retaining Ring Pliers - Qtr-Turn Convertible 

68-007D 0.070 Tip, Internal/External, Straight Retaining Ring Pliers - Qtr-Turn Convertible 



- Blow Mold Case 

9 

P L I E R S 

905

P L I E R S 





it is Locked Together 




6 Pc. Qtr-Turn Convertible Retaining Ring Pliers Set 


68-015 781412680157 Boxed 2.50 lb 1 


68-001 

68-003 

68-004 

68-006 

0.038 Tip, Internal/External, Straight 

Retaining Ring Pliers - Qtr-Turn Convertible 

0.038 Tip, Internal/External, 90° Retaining 

Ring Pliers - Qtr-Turn Convertible 

0.047 Tip, Internal/External, Straight 

Retaining Ring Pliers - Qtr-Turn Convertible 

0.047 Tip, Internal/External, 90° Retaining 

Ring Pliers - Qtr-Turn Convertible 

68-009 0.070 Tip, Internal/External, 90° Retaining Ring Pliers - Qtr-Turn Convertible 

68-007D 0.070 Tip, Internal/External, Straight Retaining Ring Pliers - Qtr-Turn Convertible 


P L I E R S 9 





it is Locked Together 




Retaining Ring Pliers, Internal/External 



68-001 781412680010 Bagged 6.000 in 0.038" Tip, Convertible, Straight 0.19 lb 1 

68-002 781412680027 Bagged 6.000 in 0.038" Tip, Convertible, 45° 0.16 lb 1 



68-005D 781412680058 Bagged 6.000 in 0.047" Tip, Convertible, 45° 0.19 lb 1 


68-007D 781412680072 Bagged 7.750 in 0.070" Tip, Convertible, Straight 0.31 lb 1 






906

P L I E R S 



■■Convertible; Fast and Easy, Compress Handles Slightly, Depress 

Shift Button, and Turn Knob 



■■Can Be Used on 1/4" to 2" Retaining Rings 

6 Pc. Cam-Lock Convertible Retaining Ring 

Plier Set 


68-056 781412680560 Boxed 9.50 lb 1 


68-045 

68-046 

68-047 

68-048 

0.038" Tip, Internal/External, 18° Retaining Ring Pliers - 

Cam-Lock Convertible 







68-049D 0.070" Tip, Internal/External, 18° Retaining Ring Pliers - Cam-Lock Convertible 

68-050D 0.070" Tip, Internal/External, 90° Retaining Ring Pliers - Cam-Lock Convertible 




■■Convertible; Fast and Easy, Compress Handles Slightly, Depress 

Shift Button, and Turn Knob 



■■Can Be Used on 1/4" to 2" Retaining Rings 

Retaining Ring Pliers, Internal/External 


9 








P L I E R S 

907

P L I E R S 


■■Contains One External Plier (For Shaft Diameters 3/8" - 2"), 

■■One Internal Plier(For Bore Diameter 3/8" - 2") 

■■Includes One Pair Each of Replaceable Tips; 0.047 Straight, 

■■0.070 Straight, 0.047 45 Degree, 0.038 90 Degree 

■■Includes Plastic Storage Box (Pliers Not Sold Seperately) 


GGG-P-480E 

Light Duty Retaining Ring Pliers Set 

Cat. No. UPC No. Packaging Description Used On Includes Tips Dia./ Angle Product Weight Shelf Pack Qty. 

68-065D 781412680652 Boxed 

Light Duty Retaining 

Ring Pliers Set 

68-067 781412680676 Bagged Replacement Tip Set 68-065D 

- 

0.047 Straight, 0.070 Straight, 0.047 45 

Degree, 0.038 90 Degree 

2 pairs 0.047" Tip Straight, 2 pairs 0.070" 

Tip Straight, 2 pairs 0.047" Tip 45°, 2 pairs 

0.038" Tip 90° 

2.40 lb 1 

0.04 lb 1 

P L I E R S 9 

6 Pc. Internal/External Convertible Pliers Set 



■■Contains 3 Pliers and 3 Replacement Tip Sets 

■■Spring Loaded Handles Speed Operation Plus Ratcheting 

Mechanism on 68-071 to Help Control Large Retaining Rings 

■■Replaceable Tips Are Locked Into Place with A Set Screw 

■■For Shafts & Bore Diameters From 1/8" to 4" 


GGG-P-480E 


68-079 781412680799 Boxed 2.51 lb 1 


68-070 1/4" to 2" Retaining Ring Pliers, Internal/External Convertible 68-076 Replacement Tip Set for 68-071 

68-071 1-1/2" to 4" Retaining Ring Pliers, Internal/External Convertible 68-069D 1/8" to 1" Retaining Ring Pliers, Internal/External Convertible 

68-074 Replacement Tip Set for 68-069 - Blow Mold Case 

68-075 Replacement Tip Set for 68-070 

908

P L I E R S 



■■Spring Loaded Handles Speed Operation Plus Ratcheting 

Mechanism to Help Control Large Retaining Rings (on 68-071) 

■■Replaceable Tips Are Locked Into Place with a Set Screw 

Retaining Ring Pliers, Internal/External Convertible 

Cat. No. UPC No. Packaging Application Overall Length Tip Description Product Weight Shelf Pack Qty. 

68-069D 781412680690 Bagged 

68-070 781412680706 Bagged 

68-071 781412680713 Bagged 

For Shafts & Bores, Diameter 

1/8" to 1" 


1/4" to 2" 


1-1/2" to 4" 

6.188 in 

8.000 in 

10.250 in 

0.024, 0.038, 0.047 Straight" Tips, 

0.038, 0.047 90° Tips 

0.038, 0.047, 0.070 Straight" Tips, 

0.038, 0.047 90° Tips 

0.090, 0.108, 0.120 15° Tips, 

0.090, 0.108, 0.120 90° Tips 

1.20 lb 1 

1.25 lb 1 

1.30 lb 1 


■■For Use with Internal/External Convertible Pliers 

■■Each Tip Set is Furnished in a Plastic Pouch and Includes 

a Hex Key 


GGG-P-480E 

Retaining Ring Pliers, Replacement Tip Sets 

9 

Cat. No. UPC No. Packaging Used On Tip Description Product Weight Shelf Pack Qty. 

68-074 781412680744 Bagged 68-069 

68-075 781412680751 Bagged 68-070 

68-076 781412680768 Bagged 68-071 

1 pair 0.024" Tip Straight, 



1 pair 0.038" Tip 90°, 

1 pair 0.047" Tip 90° 




1 pair 0.038" Tip 90°, 

1 pair 0.047" Tip 90° 

1 pair 0.090" Tip 15°, 

1 pair 0.108" Tip 15°, 

1 pair 0.120" Tip 15°, 

1 pair 0.090" Tip 90°, 

1 pair 0.120" Tip 90° 

0.04 lb 1 

0.04 lb 1 

0.12 lb 1 

P L I E R S 

909

P L I E R S 


■■Contains One External Plier (for Shaft Diameters 1- 1/2" - 3-3/4"), 

One Internal Plier (for Bore Diameter 2-7/16" - 4") 

■■Includes One Pair Each of Replaceable Tips; .108 Straight, .108 

15 Degree .108 45 Degree, .108 90 Degree, .120 Straight, .120 15 

Degree .120 45 Degree, .120 90 Degree, 

■■Includes a Storage Case 


GGG-P-480E 

Heavy Duty Retaining Ring Pliers Set 

Cat. No. UPC No. Packaging Description Used On Includes Tips Dia./ Angle 

Product 

Weight 

Shelf 

Pack Qty. 

68-080 781412680805 Boxed 

Heavy Duty Retaining 

Ring Pliers set 

- - 2.47 lb 1 

68-082 781412680829 Bagged Replacement Tip Set 68-080 

1 pair 0.108" Tip Straight, 1 pair 0.108" Tip 15°, 1 

pair 0.108" Tip 45°, 1 pair 0.108" Tip 90° 

0.07 lb 1 

68-083 781412680836 Bagged Replacement Tip Set 68-080 

1 pair 0.120" Tip Straight, 1 pair 0.120" Tip 15°, 1 

pair 0.120" Tip 45°, 1 pair 0.120" Tip 90° 

0.07 lb 1 

P L I E R S 9 


■■For Use with External Retaining Rings Only 

■■Provide Necessary Leverage to Expand or Contract Large 

Retaining Rings During Installation / Removal 

■■Feature A Spring Loaded Ratcheting Mechanism Which Allows 

the Ring to Be Compressed / Expanded Gradually, Then Locks 

at Desired Size Without Continued Pressure on the Handles 

■■Replaceable Tips 

■■Can Be Used on Up to 2-3/4" Retaining Rings 

Super Heavy Duty Retaining Ring Pliers, External 


68-095D 781412680959 Bagged 16.000 in 0.120" Tip, External, Straight 2.16 lb 1 

■■For Use with Super Heavy Duty Retaining Ring Pliers 

Super Heavy Duty Retaing Ring Pliers, External 

Replacement Tips 

Cat. No. UPC No. Packaging Used On Includes Tips Dia./ Angle Product Weight Shelf Pack Qty. 

68-097 781412680973 Bagged 68-095D 1 pair 0.120" Tip Straight, 1 pair 0.120" Tip 45°, 1 pair 0.120" Tip 90° 0.06 lb 1 

910

P L I E R S 

Super Heavy Duty Retaining Ring Pliers, Internal 


■■For Use with Internal Retaining Rings Only 

■■Provide Necessary Leverage to Expand or Contract Large 

Retaining Rings During Installation / Removal 

■■Feature A Spring Loaded Ratcheting Mechanism Which Allows 

the Ring to Be Compressed / Expanded Gradually, Then Locks 

at Desired Size Without Continued Pressure on the Handles 

■■Replaceable Tips 

■■Can Be Used on Up to 2-3/4" Retaining Rings 


GGG-P-480E 



■■For Use with Super Heavy Duty Retaining Ring Pliers 

Super Heavy Duty Retaing Ring Pliers, Internal 

Replacement Tips 

Cat. No. UPC No. Packaging Used On Includes Tips Dia./ Angle Product Weight Shelf Pack Qty. 

68-092D 781412680928 Bagged 68-090 1 pair 0.120" Tip Straight, 1 pair 0.120" Tip 45°, 1 pair 0.120" Tip 90° 0.06 lb 1 

6 Pc. Wiretwister Pliers Set 


■■Wire Twister Pliers and Safety Wire Are Used for Safety-Wiring 

Fasteners in Aviation and Other Applications Such as Engines, 

Gearboxes or Any Assembly Where Vibration May Cause 

Fasteners to Back Out 

■■Includes 0.020", 0.032", 0.041" Spools of Stainless Steel 

Safety Wire 

9 


68-199 781412681994 Boxed 3.87 lb 1 


68-163 6" Wiretwister, Manual, Diagonal Nose, Right Hand Twist 68-191 19" Wiretwister, Deep Reach 

68-175 9" Wiretwister, Automatic, Diagonal Nose, Right Hand Twist - Blow Mold Case 

P L I E R S 

911

P L I E R S 






■■Induction Hardened Cutting Edges Especially Designed for 

Cutting Stainless Steel Safety Wire 

■■Diamond Serrations on Jaws Hold Wire Securely and 

Resist Nicking 

■■Diagonal Nose Allows Access in Tight Work Areas 


GGG-W-340B 

Wiretwister, Manual, Diagonal Nose, RH Twist 

Cat. No. UPC No. Packaging Length Overall Length Wire Size Wire Cutter Product Weight Shelf Pack Qty. 

68-163 781412681635 Bagged 6.000 in 8.375 in 0.020" to 0.041" Yes 0.66 lb 1 


P L I E R S 9 











■■Automatic Spring Return Speeds Operation and 

Reduces Fatigue 


GGG-W-340B 

Wiretwister, Automatic, Diagonal Nose, RH Twist 




Wiretwister, Deep Reach 






■■Designed for Access Into Close, Tight Clearance Areas 


GGG-W-340B 


68-191 781412681918 Bagged 19.000 in 19.000 in 0.020" to 0.041" No 0.31 lb 1 

912

P L I E R S 






■■Reversible Feature Provides Standard Right Twist as Well as Left 

Twist Capability 







GGG-W-340B 

Wiretwister, Diagonal Nose, Reversible Twist 




9 

P L I E R S 

913

P L I E R S 

3 Pc. Tongue and Groove Pliers Set 


■■More Positions for More Flexibility and More Grip Comfort 

■■Angled Tooth Pattern for Better Grip 

■■Extra Wide, Straight, Jaw Openings 

■■Unique Alloy Steel and Induction Hardening, 

Maximizes Durability 

■■Precision Machining and Riveted Joint Provides Smooth, Positive 

Joint Action with No Slip 

■■Self-Locking Adjustment 


Cat. No. UPC No. Packaging Jaw Type Wire Cutter Product Weight Shelf Pack Qty. 

R200SET3 037103205742 Carded Straight No 3.22 lb 4 


R27CV 7" Tongue and Groove Pliers, Straight Jaws, Cushion Grip R212CV 12" Tongue and Groove Pliers, Straight Jaws, Cushion Grip 

R210CV 10" Tongue and Groove Pliers, Straight Jaws, Cushion Grip 

P L I E R S 9 

2 Pc. Tongue and Groove Pliers Set 


■■More Positions for More Flexibility and More Grip Comfort 


■■Extra Wide, Straight Jaw Openings 

■■Unique Alloy Steel and Induction Hardening, 

Maximizes Durability 

■■Precision Machining and Riveted Joint Provides Smooth, Positive 

Joint Action with No Slip 

■■Self-Locking Adjustment 


Cat. No. UPC No. Packaging Jaw Type Wire Cutter Product Weight Shelf Pack Qty. 

R200SET2 037103205759 Carded Straight No 1.50 lb 4 


R27CV 7" Tongue and Groove Pliers, Straight Jaws, Cushion Grip R210CV 10" Tongue and Groove Pliers, Straight Jaws, Cushion Grip 

914

P L I E R S 

Tongue and Groove Pliers, Straight Jaw 

■■Made From Finest Quality Alloy Tool Steel 

■■Designed to Grip All Shapes Like Rods, Pipes and 

Cable Connections 

■■Precision-Milled Ribs for Smooth, Positive Interlock Between 

Two Halves 

■■Riveted Joint Will Not Separate or Jump Out of Grooves 

■■Straight Jaws and Self-Locking Jaw Adjustment 

■■Forged, Hardened and Tempered 

■■Red Non-Slip Cushion Handle Grips 

■■Induction Hardened Angled Gripping Teeth 


Cat. No. UPC No. Packaging Overall Length Jaw Capacity Jaw Type Wire Cutter Product Weight Shelf Pack Qty. 

R27CV 037103462602 Carded 7 in 1-5/16 in Straight No 0.45 lb 6 


R220CV 037103467041 Carded 10 in 4 in Straight No 1.00 lb 6 


R216CV 037103469687 Carded 16 in 4 1/2 Straight No 2.85 lb 3 

HL120P 043127121043 Carded 20 in 6 in Straight No 4.25 lb 2 

■■Made From Finest Quality Alloy Tool Steel 

■■Designed to Grip All Shapes Like Rods, Pipes and 

Cable Connections 

■■Precision-Milled Ribs for Smooth, Positive Interlock Between 

Two Halves 

■■Riveted Joint Will Not Separate or Jump Out of Grooves 

■■Forged, Hardened and Tempered 


■■Induction Hardened Angled Gripping Teeth 


Tongue and Groove Pliers, V-Jaw 

9 


R410CV 037103464705 Carded 10 in 1-13/16 in V-Jaw No 0.75 lb 6 

R412CV 037103217066 Carded 12 in 3 in V-Jaw No 1.45 lb 6 

■■Designed for Gripping and Turning Round Objects Such 

as Pipes, Rods and Pins 

■■Curved Jaws Combination with Machined Gripping Teeth and 

Wire Cutter 

■■Forged From Alloy Steel and Accurately Machined, Hardened 

and Tempered 

■■Nickel Chrome Plated Finish 


Slip Joint Pliers, Cee Tee Co.® 

P L I E R S 


H26CVSMLN 037103227973 Carded 6.5 in 1 Curved Yes 0.56 lb 3 

H26N 037103227959 Boxed 6.5 in 1 Curved Yes 0.45 lb 12 

H26VN 037103227966 Carded 6.5 in 1 Curved Yes 0.50 lb 3 

H28CVSMLN 037103228017 Carded 8 in 1 Curved Yes 0.70 lb 3 

H28N 037103227980 Boxed 8 in 1 Curved Yes 0.60 lb 12 

H28VN 037103227997 Carded 8 in 1 Curved Yes 0.65 lb 3 

915

P L I E R S 

■■Designed for Gripping, Turning Round Objects Such as Pipes, 

Rods, Pins 

■■Extra Thin, Straight Nose Combination Pliers 

■■Machined Gripping Teeth and Wire Cutter for Confined Places 

■■Forged From Alloy Steel and Accurately Machined, Hardened 

and Tempered 



Slip Joint Pliers, Thin Nose 


L26CV 037103470003 Carded 6 in 1 Thin Straight Yes 0.50 lb 6 

■■Designed for Gripping, Turning Round Objects Such As Pipes, 

Rods, Pins 

■■30° Angle Bent Nose Combination, Machined Gripping Teeth 

& Wire Cutter 

■■Forged From Carbon Steel 

■■Accurately Machined, Hardened and Tempered 

■■Bright, Polished Steel with Chromium Plating 


Slip Joint Pliers, Bent Nose 


J26CV 037103469984 Carded 6 in 1 Thin Bent Nose Yes 0.50 lb 6 

P L I E R S 9 

■■Designed for Gripping and Turning Round Objects Such 

as Pipes, Rods and Pins 

■■Motor Kit Combination with Machined Gripping Teeth and 

Wire Cutter 

■■Forged From Carbon Steel, Accurately Machined, Hardened 

and Tempered 


■■Knurled Handles or Red Non-Slip Cushion Handle Grips 

Slip Joint Pliers, Motor Kit Combination 


G24CV 037103102416 Carded 4 in 1/2 Curved Yes 0.20 lb 6 

G210CV 037103469960 Carded 10 in 1 3/8 Curved Yes 1.05 lb 6 

■■Fits A-N Electrical Connectors 

■■Three Adjustment Positions 

■■Replacement Insert Kit Available: Consists of 2 Pins, 2 Pads 

Electrical Connector Pliers 

Cat. No. UPC No. Packaging Description Length Product Weight Shelf Pack Qty. 

52910N 037103213716 Carded 10" A-N Connector Slip Joint Pliers 10 in 0.70 lb 6 

52910KITN 037103213723 Carded Replacement Parts Kit for 52910 - 0.02 lb 1 

916

P L I E R S 

■■Designed for General Wire Cutting in Confined Spaces 

■■Standard Jaw 

■■Electronically Induction Hardened and Hand-Honed 

■■Long Cutting Edges for Harder Wires 

■■Round Joint Design 

■■Made of Drop-Forged Alloy Steel 

■■Individually Tested for Strength and Cutting Ability 



■■Spring Keeps Jaws Open - Where Applicable 

Diagonal Cutting Pliers, General Purpose 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

9336CVN 037103213198 Carded 6 in 13/16 in 3/4 in 7/16 in Std./12 AWG 0.41 lb 6 

9336N 037103213174 Bagged 6 in 13/16 in 3/4 in 7/16 in Std./12 AWG 0.40 lb 6 

9336SCN 037103213266 Bagged 6 in 13/16 in 3/4 in 7/16 in Std./12 AWG 0.40 lb 6 

9337CVN 037103213501 Carded 7 in 1 in 29/32 in 15/32 in Std./12 AWG 0.60 lb 6 

9337N 037103213518 Bagged 7 in 1 in 29/32 in 15/32 in Std./12 AWG 0.50 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

■■Designed for Powerful, Heavy Cutting and Tip Cutting Bx 

Armored Cable 

■■Electronically Induction Hardened and Hand-Honed 

Cutting Edges 

■■Made of Forged Alloy Tool Steel 



■■Full-Fashioned Handles for Maximum Leverage 


Diagonal Cutting Pliers, Heavy 

9 


Overall 

Length 

Jaw 

Length 

Jaw 

Width 

Jaw 

Thickness 

Edge Type/Cut Capacity 

7427CVN 037103213471 Carded Heavy Duty 7 in 3/4 in 7/8 in 1/2 in Std./12 AWG 0.70 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

■■Designed for Heavy-Duty Wire Cutting 

■■Electronically Induction Hardened Hand-Honed, Long Lasting 

Cutting Edges 





■■Angled Head for Offset Cutting 

■■Standard or Flush Cutting Edges 

Diagonal Cutting Pliers, Heavy-Duty 

P L I E R S 


Overall 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

5427CVN 037103212801 Carded Heavy Duty 7 in 25/32 in 1-7/32 in 15/32 in Std./12 AWG 0.65 lb 6 

5427N 037103212702 Bagged Heavy Duty 7 in 25/32 in 1-7/32 in 15/32 in Std./12 AWG 0.63 lb 6 

5428CN 037103212764 Bagged Heavy Duty 8 in 25/32 in 1-7/32 in 15/32 in Std./12 AWG 0.60 lb 6 

5428CVN 037103212771 Carded Heavy Duty 8 in 25/32 in 1-7/32 in 15/32 in Std./22 AWG 0.74 lb 6 

5428N 037103212740 Bagged Heavy Duty 8 in 25/32 in 1-7/32 in 15/32 in Std./12 AWG 0.63 lb 6 

5437CEN 037103212733 Bagged Heavy Duty 7 in 25/32 in 1-7/32 in 15/32 in Flush/22 AWG 0.55 lb 6 

5438CEN 037103212788 Bagged Heavy Duty 8 in 25/32 in 1-7/32 in 15/32 in Flush/12 AWG 0.70 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

917

P L I E R S 

■■Designed for Reaching Confined Areas 

■■Long Chain Nose with Fine Serrated Jaws to Make Wire Loops 

and Bends 

■■Electronically Induction Hardened Hand-Honed, Keen Side 

Cutting Edges 





■■Spring Keeps Jaws Open - Where Applicable 

Chain Nose Pliers, Long with Side Cutting 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

6546CVSMLN 037103212832 Carded 6.625 in 1-7/8 in 11/16 in 3/8 in Std./14 AWG 0.37 lb 3 

6546N 037103212795 Boxed 6.625 in 1-7/8 in 11/16 in 3/8 in Std./14 AWG 0.34 lb 6 

6546SCN 037103212825 Boxed 6.625 in 1-7/8 in 11/16 in 3/8 in Std./14 AWG 0.35 lb 6 

6547CVN 037103212993 Carded 7.500 in 2-21/32 in 3/4 in 3/8 in Std./14 AWG 0.45 lb 6 

6547N 037103212962 Boxed 7.500 in 2-21/32 in 3/4 in 3/8 in Std./14 AWG 0.38 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 

Chain Nose Pliers, Long 

■■Designed for Reaching Confined Areas 

■■Long Chain Nose with Fine Serrated Jaws to Make Wire Loops 

and Bends 

■■Electronically Induction Hardened Hand-Honed, Keen Side 

Cutting Edges 





Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

10336CVN 037103212900 Carded Electronic Repair 6.625 in 1-7/8 in 11/16 in 3/8 in None 0.38 lb 6 

10337CVN 037103213013 Carded Electronic Repair 7.5 in 2-21/32 in 3/4 in 3/8 in None 0.46 lb 6 

■■Designed for Work in Tight, Narrow Areas 

■■Long Needle Nose with Excellent Gripping Ability 

■■Made of Forged Alloy Tool Steel and Individually Tested 

for Strength 



Needle Nose Pliers, Long 

Product 

Weight 

Shelf Pack 

Qty. 


7776CVN 037103213372 Carded 6.5 in 2-1/16 in 11/16 in 11/32 in 0.31 lb 6 

7776SCN 037103213389 Boxed 6.5 in 2-1/16 in 11/16 in 11/32 in 0.30 lb 6 

7777CVN 037103213396 Carded 7.46875 in 2-11/16 in 11/16 in 21/64 in 0.30 lb 6 

918

P L I E R S 

Needle Nose Pliers, Bent 

■■Designed for Working in Out-of-the-Way Confined Corners 

■■Thin Bent Nose, Tempered Jaws Return to Normal When 

Pressure is Released 

■■Electronically Induction Hardened 

■■Made of Forged Alloy Tool Steel and Individually Tested 

for Strength 




8886CVN 037103213020 Carded 6 in 1 in 11/16 in 3/8 in 0.46 lb 6 

■■Designed for Electrical Work 

■■Electronically Induction Hardened, Durable and Keen Side 

Cutting Edges 



■■Spring Tempered Handles with Non-Slip Cushion Handle Grips 


Lineman's Pliers, Side Cutting 

Overall 

Length 

Jaw 

Length 

Jaw 

Width 

Jaw 

Thickness 

Edge Type/Cut 

Capacity 

Cutting Edge 

Length 

507CVN 037103213440 Carded Electrical 7.25 in 1-9/32 in 1 in 1/2 in Std./12 AWG 5/8 in 0.70 lb 6 

508CVN 037103213365 Carded Electrical 8.3125 in 1-15/32 in 1-1/8 in 9/16 in Std./11 AWG 3/4 in 0.94 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

■■Designed for the Requirements of Linemen, Cutting Many 

Gauges of Wire 

■■Electronically Induction Hardened, Durable and Keen Side 

Cutting Edges 



Lineman's Pliers, Heavy-Duty Side Cutting 

9 


Overall 

Length 

Jaw 

Length 

Jaw 

Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

19507CVN 037103213402 Carded Heavy Duty Side Cut 7.25 in 1-9/32 in 1-1/8 in 1/2 in Std./12 AWG 5/8 in 0.70 lb 6 

19508CVN 037103213419 Carded Heavy Duty Side Cut 8.625 in 1-1/2 in 1-3/16 in 5/8 in Std./11 AWG 3/4 in 0.95 lb 6 

■■Streamlined Head Design Allows Easy Sliding in and Out 

of Belt Loops 

■■Cutting Edges Cut Clean and Remain Sharp 

■■Electronically Induction Hardened, Durable and Hand Honed 

■■Made of Forged Alloy Steel 

Lineman's Pliers, High Leverage 

Cutting 

Edge 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

P L I E R S 


Overall 

Length 

Jaw 

Length 

Jaw 

Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

20509CVSMLN 037103213815 Carded High Leverage Side Cut 9.25 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 13/16 in 1.10 lb 3 

20509IVN 037103213822 Carded High Leverage Side Cut 9.25 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 13/16 in 1.10 lb 6 

20509N 037103213792 Boxed High Leverage Side Cut 9.25 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 13/16 in 1.10 lb 6 

Cutting 

Edge 

Length 

Product 

Weight 

Shelf 

Pack 

Qty. 

919

P L I E R S 

■■Streamlined Head Design Allows Easy Sliding in and Out 

of Belt Loops 

■■Cutting Edges Cut Clean and Remain Sharp 

■■Electronically Induction Hardened, Durable and Hand Honed 

■■Made of Forged Alloy Steel 

Lineman's Pliers, High Leverage Round Nose 


Overall 

Length 

Jaw 

Length 

Jaw 

Width 

Jaw 

Thickness 

Edge Type/Cut 

Capacity 

21508CVN 037103213426 Carded High Leverage Side Cut 8.5 in 1-7/16 in 1-3/16 in 5/8 in Std./11 AWG 3/4 in 1.00 lb 6 

Cutting 

Edge 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

Ironworker's Plier 

■■Designed for Ironworkers to Tie Concrete Reinforcing Bars 

■■Jaws Remain Open with Coil Spring Yet Close with Normal Grip 


Overall 

Length 

Jaw 

Length 

Jaw 

Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

20509WSCVSMLN 037103213839 Carded High Leverage Side Cut 9.25 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 13/16 in 0.70 lb 3 

Cutting 

Edge 

Length 

Product 

Weight 

Shelf 

Pack 

Qty. 

P L I E R S 9 

Button Pliers Fence Tool 

■■Button Pliers 

■■Designed for Construction and Maintenance of Wire Fencing 

■■Flat Nose with 3 Wire Cutters, Pipe Grips, Teeth in Extreme Tip 

of Nose 

■■Electronically Hardened Durable Edges 




Cat. No. UPC No. Packaging Length 

Edge Type/Cut 

Capacity Jaw Type Product Weight Shelf Pack Qty. 

10008VN 037103213068 Carded 8 in Std./12 AWG Button 0.80 lb 6 

100010VN 037103213051 Carded 10-1/4 in Std./11 AWG Button 1.25 lb 6 

100012VN 037103213099 Carded 12 in Std./11 AWG Button 2.02 lb 6 

■■Button Pliers 

■■Designed for Construction and Maintenance of Wire Fencing 

■■3 Wire Cutters 

■■Pipe Grips 

■■Hardened Cutting Edges 

■■Forged Alloy Tool Steel 


■■Straight Knurled Handles 

■■Narrow Broaching of Teeth Area 

Button Pliers Fence Tool, Straighter Handle 

Cat. No. UPC No. Packaging Length Edge Type/Cut Capacity Jaw Type Product Weight Shelf Pack Qty. 

100010DN 037103213044 Carded 10-1/4 in Std./11 AWG Button 1.30 lb 6 

920

P L I E R S 

■■2 Staple Grips in Nose 

■■Corrugated Hammer Head, Heavy Prong, Easily Reach, Pull 

Rusty Staples 

■■Starting & Pulling Joint on One Jaw with Corrugated Hammer 

on the Other 

■■Hardened, Pointed Head Pulls Staples and Lift Lugs 

■■Special Opening in Head Allows Both Wire and Staple 

to be Gripped 

■■2 Electronically Induction Hardened Durable Wire Cutters 



■■Gun Metal, Knurled Grip Handles 

■■Should Not be Used to Hammer Hardened Materials 


Heavy-Duty Fence Tool Pliers 

Edge Type/Cut 


037103212948 Carded 10-7/16 in Std./11 AWG Dual Head 1.86 lb 3 

193610VN 037103212955 Carded 10.4375 in Std./11 AWG Dual Head 1.72 lb 6 

■■Should Not Be Used to Hammer Hardened Materials 

■■Only Tool Needed for Work on Metal or Wood Posts 

■■Starting & Pulling Joint on One Jaw with Corrugated Hammer 

on the Other 

■■Stretches Wire Tight Before Fastening 

■■Wire Cutter on Each Side Cuts Double Strand Barbed Wire 

■■Dual Head Design-Corrugated Head Drives Staples 

■■Hardened, Pointed Head Pulls Staples and Lift Lugs 

■■Heavy-Duty Lock-Joint Construction Increases Tool Life 

■■Gun Metal, Knurled Grip Handles 

■■Should Not be Used to Hammer Hardened Materials 

Fence Pliers and Staple Puller 

9 


Edge Type/Cut 


193410CVN 037103213075 Carded 10.3125 in Std./11 AWG Dual Head 1.49 lb 6 

193410VN 037103213082 Carded 10.3125 in Std./11 AWG Dual Head 1.50 lb 6 

■■Ergonomic Heavy-Duty Diagonal Cutter 

■■Flush Ground Back for Close Cutting 

■■Adjustable Stops Prolong Cutting Edge Life 

■■Handle Coil Springs Reduce User Fatigue 

Diagonal Cutting Pliers, Heavy-Duty, Plastic Handle 

P L I E R S 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Jaw Type 

M56RPN 037103213532 Boxed 6 in 27/32 in 23/32 in 13/32 in Flush Heavy Duty Diagonal 0.40 lb 6 

M57RPN 037103213556 Boxed 7 in 1-3/32 in 29/32 in 31/64 in Flush Heavy Duty Diagonal 0.55 lb 6 

Product 

Weight 

Shelf 

Pack Qty. 

921

P L I E R S 

■■Ergonomic Heavy-Duty Cutter 

■■Ergonomically Designed Handles Increase Productivity 

■■Reduces User Fatigue and Allowing Easier Gripping and Control 

■■Adjustable Stops Prolong Cutting Edge Life 


Diagonal Cutting Pliers, Heavy-Duty, Plastic 

Ergonomic Handle 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Jaw Type 

M57ERN 037103213549 Boxed 7 in 1-1/16 in 59/64 in 1/2 in Flush Heavy Duty Diagonal 0.60 lb 6 

Product 

Weight 

Shelf 

Pack Qty. 

■■For Close Trimming of Gates and Sprue on Injection Molded 

Plastic Parts 

■■Flush Ground, Oval Shaped Jaws, Fine Point Permits Use in 




■■Blue Vinyl Cushion Grips 

Diagonal Cutting Pliers, Flush Ground, Plastic Handle 

P L I E R S 9 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Jaw Type 

TP55N 037103213358 Boxed 5 in 49/64 in 5/8 in 11/32 in Flush Diagonal 0.30 lb 6 

TP56N 037103213587 Boxed 6 in 53/64 in 23/32 in 13/32 in Flush Diagonal 0.35 lb 6 

TP57N 037103213594 Boxed 7 in 1-1/16 in 55/64 in 15/32 in Flush Diagonal 0.55 lb 6 

■■Extra Slim Design 

■■Ground Flat on Back Side 


■■Blue Vinyl Cushion Grips 

■■Flush Ground Edges 

■■Oval Shape Jaws with Fine Point Are Throat Relief Ground 

for Clearance 

Diagonal Cutting Pliers, Thin, Plastic Handle 

Product 

Weight 

Shelf Pack 

Qty. 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Jaw Type 

P43N 037103213563 Boxed 4 in 41/64 in 37/64 in 11/32 in Flush Diagonal Relieved 0.20 lb 6 

TP53N 037103213570 Boxed 5 in 25/32 in 5/8 in 23/64 in Flush Diagonal Relieved 0.20 lb 6 

TP63N 037103213600 Boxed 6 in 27/32 in 47/64 in 13/32 in Flush Diagonal Relieved 0.40 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

922

P L I E R S 

End Cutting Nipper Pliers 

■■Top Quality End Cutting Tool 

■■Precision Manufactured From Forged Alloy Tool Steel 

■■Handles with Carefully Designed Leverage Ratio to Blades, 

Easier Cutting 

■■Carefully Designed Throat Clearance and Rivet Size 

■■Electronically Induction Hardened, Angled Cutting Edges and 

Blade Sizes 


Overall 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

Cutting 

Edge Length 

727CVN 037103213150 Carded 7-1/4 in 3/8 in 1-3/4 in 17/32 in Std./12 AWG 13/16 in 0.65 lb 6 

727VN 037103213167 Carded 7-1/4 in 3/8 in 1-3/4 in 17/32 in Std./12 AWG 13/16 in 0.80 lb 6 

728CVN 037103213112 Carded 8-1/4 in 3/8 in 1-3/4 in 17/32 in Std./12 AWG 13/16 in 0.85 lb 6 

728VN 037103213129 Carded 8-1/4 in 3/8 in 1-3/4 in 17/32 in Std./12 AWG 13/16 in 0.90 lb 6 

729CVN 037103213143 Carded 9-1/4 in 13/32 in 1-3/4 in 19/32 in Std./12 AWG 1-1/4 in 0.98 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

Carbide Cutters 

■■Professional Nippers 

■■Long Lasting Carbide Cutting Edges 

■■Handle Spring to Reduce Fatigue and Permit Fast, Repetitive 

Cutting 

■■Dark Red Plastic Handle Grips 


Overall 


Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting 

Edge Length 

GT28CN 037103213785 Bagged 8 in 41/64 in 1-15/16 in 29/64 in Tile Cutting 13/16 in 0.80 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

9 

Carpenter's Pincers 

■■Rugged, General Use Tool 

■■Ideal for Cutting or Pulling Nails and Wire 

■■Hardened Cutting Edges Give Long Lasting Cutting Performance 

■■Drop-Forged From High Quality Tool Steel 


■■Black Finish 


Overall 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

Cutting 

Edge Length 

GG08HN 037103213778 Carded 8 in 43/64 in 2-1/8 in 9/16 in Std./12 AWG 51/64 in 0.85 lb 6 

■■Strong, Lightweight Design for Demanding Construction Use 

■■Hardened and Honed Cutting Edges 

■■Drop-Forged High Quality Tool Steel, Heat-Treated, Tempered 

Handles/Jaws 


■■Develops High Leverage to Cut Large Diameter Nails and Wire 

■■Black Finish 

Heavy-Duty End Cutting Nipper Pliers 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 


Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/ 

Cut Capacity 

Cutting Edge 

Length 

GG010HN 037103213754 Carded Heavy Duty 10 in 41/64 in 2-5/32 in 37/64 in Std./12 AWG 25/32 in 1.04 lb 6 

GG014HN 037103213761 Carded Heavy Duty 14 in 23/32 in 2-21/32 in 41/64 in Std./12 AWG 7/8 in 2.15 lb 3 

Product 

Weight 

Shelf Pack 

Qty. 

923

P L I E R S 

■■Co-Molded Grips for Added Comfort 

■■Increase Cutting Pressure by 50% 

■■Chrome Vanadium Steel for Increased Durability 

■■Heat Treated Joint Rivet for Smooth and Consistent Operation 

■■Induction Hardened Edges for Long Cutting Life 

■■1/3 Lighter Than Standard Pliers, Reduces Fatigue 

Pro Series Diagonal Compound Action Cutting Pliers 


Overall 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

PS5429C 037103216847 Carded Heavy Duty 8 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 0.50 lb 3 

Product 

Weight 

Shelf Pack 

Qty. 







Pro Series Long Nose Compound Action 

Cutting Pliers 


Overall 


Jaw 

Thickness 

Edge Type/Cut 

Capacity 

PS6549C 037103216823 Carded Heavy Duty 9 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 0.60 lb 3 

Product 

Weight 

Shelf Pack 

Qty. 

P L I E R S 9 








Pro Series Lineman's Compound Action Cutting 

Pliers 

Overall 

Length 

Jaw 

Length 

Jaw Width 

Jaw 

Thickness 

Edge Type/Cut 

Capacity 

Cutting Edge 

Length 

PS20509C 037103216861 Carded Heavy Duty 8 in 1-9/16 in 1-9/32 in 5/8 in Std./11 AWG 13/16 in 0.60 lb 3 

Product 

Weight 

Shelf 

Pack Qty. 

924

P L I E R S 


■■Maximum Jaw Opening Per ASME Specs 


■■Nickel-Plated Finish Resists Rust and Corrosion 

■■Compound Action for Powerful Non-Slip Locking Grip 

■■Long Nose with Wire Cutter Gets to Hard-To-Reach Spots 

■■Versatile Curved Jaw Also Features Integral Wire Cutter 

5 Pc. Locking Pliers Set, Curved Jaw and Long Nose 


CLP5SET 037103202895 Carded 4.06 lb 1 


C6NV 6" Long Nose Locking Plier With Wire Cutter C5CV 5" Curved Jaw Locking Plier With Wire Cutter 

C9NV 9" Long Nose Locking Plier With Wire Cutter C10CV 10" Curved Jaw Locking Plier With Wire Cutter 








3 Pc. Cushion Grip Curved Jaw Locking Pliers Set 

9 

Cat. No. UPC No. Packaging Jaw Type Product Weight Shelf Pack Qty. 

CLP3SETC 037103202888 Carded Curved 2.65 lb 1 







3 Pc. Curved Jaw Locking Pliers Set 

P L I E R S 


CLP3SET 037103202871 Carded Curved 2.54 lb 1 

925

P L I E R S 







2 Pc. Curved Jaw Locking Pliers Set 


CLP2SET 037103202864 Carded Curved 2.07 lb 1 

Straight Jaw Locking Pliers 








C7SV 037103206664 Carded 7 in 1 5/16 in./34 mm Curved No 0.90 lb 3 

C10SV 037103206800 Carded 10 in 1 3/4 in./45 mm Straight No 1.30 lb 3 

P L I E R S 9 

Curved Jaw Locking Pliers with Wire Cutter 








C7CV 037103206695 Carded 7 in 1 5/8 in./42 mm Curved Yes 0.85 lb 3 










Long Nose Locking Pliers with Wire Cutter 


C6NV 037103206718 Carded 8-5/8 in 2 1/4 in./58 mm Long Nose Yes 0.45 lb 3 

C9NV 037103206725 Carded 8-3/4 in 2 7/8 in./73 mm Long Nose Yes 0.92 lb 3 

926

P L I E R S 





■■Locking "C" Clamps Are Faster and Easier to Use Than 

Standard Clamps 

Locking C-Clamps, Regular Tips 


C6CCV 037103206732 Carded 6 in 2 in./51 mm C-Clamp/Regular Tips No 0.55 lb 3 

C11CCV 037103206756 Carded 11 in 4 in./102 mm C-Clamp/Regular Tips No 1.95 lb 1 

C18CCR 037103217301 Carded 18 in 8 in./203 mm C-Clamp/Regular Tips No 2.59 lb 1 







Locking C-Clamps, Swivel Pad Tips 


C6CCSV 037103206749 Carded 6 in 2 1/8 in./73 mm C-Clamp/Swivel Pads No 0.62 lb 3 

C11CCSV 037103206763 Carded 11 in 4 in./102 mm C-Clamp/Swivel Pads No 1.86 lb 1 

C18CCS 037103217271 Carded 18 in 8 in./203 mm C-Clamp/Swivel Pads No 2.71 lb 1 

Locking Sheet Metal Clamp and Welder's Clamp 











C8SMV 037103206770 Carded 8 in 3/4 in./19 mm Sheet Metal Clamp No 1.11 lb 3 

C9W 037103206787 Boxed 9 in 1 1/2 in./38 mm U Shaped Welding No 1.45 lb 1 

9 

P L I E R S 




Quick Release Locking Chain Clamp 


C20CH 037103206794 Boxed 9 in 18 in. Chain Chain Clamp No 1.62 lb 1 

927

P L I E R S 

P L I E R S 9 

928

C U T T I N G 

Aviation Snips.................................... 932 

Tinner’s Snips.................................... 936 

HVAC Tools......................................... 939 

Pipe Cutters....................................... 941 

Utility Knives...................................... 941 

Scissors & Shears............................. 943 

Hand Operated Cutters...................... 950 

Complete Hydraulic Cutter Systems.. 969 

Hydraulic Pumps................................ 978 

Hydraulic Accessories....................... 979 

Pneumatic Cutters............................. 982 

Ratcheting Tap & Die Sets................ 983 

10 

Adapters............................................. 987 

Screw Extractors............................... 989 

Screw Extractors............................... 991 

Hacksaw Frames............................... 992 

C U T T I N G 

Jab Saws........................................... 993 

Hacksaw Blades................................ 994 

Hand Saws......................................... 995 

929

C U T T I N G 

Cutting Tools 

Wiss ® products have been earning their reputation for craftsmanship and long life since 1848. One result: Wiss has been the 

market leading “call-out brand” for aviation snips for over 50 years. The wide product line includes scissors, industrial shears, 

T E S T P R O V E N 

utility knives, siding and HVAC tools… all with famous Wiss quality built in. 

Machined tip 

for puncturing 

LONGEST 

LIFE 

PIVOT BOLT 

Our free-floating active pivot bolt, the backbone of the snip, 

keeps the jaws positioned together tightly long after the other 

guys’ jaws have separated and failed to get the job done. 


LONGEST 

LIFE 

PIVOT BOLT 

AVIATION 

SNIPS 


LONGEST 

LIFE 

SPRING 

R O V E N 

NGEST 

IFE 

OT BOLT 

T P R O V E N 

NGEST 

IFE 

OT BOLT 

C U T T I N G 10 

Our proprietary serration 

wave geometry, possible only 

with the consistent metallurgical 

composition of cast blades, provides 

more aggressive shearing action and 

longer blade life. 

Cast 

Consistency 


LONGEST 

LIFE 

Our valve-grade SPRING 

steel return spring, proven 

longest-lasting in extreme testing, provides 

trouble-free cutting and superior durability. 

INDUSTRIAL 

SHEARS 

Forged 

Variation 


LONGEST 

LIFE 

SPRING 

Hot drop-forged polished blades, 

safely rounded for extra protection 

Convenient 

protective 

safety latch 

Grip horns maximize 

control and safety 

One blade ground to knife-edge 

for faster, cleaner, and easier 

cutting of tough synthetic fibers 

Forged from high 

carbon steel 

Handles color-coded 

for ease of identification 

SET-EASY pivot 

Non-slip, textured grips 

for superior control, 

safety and comfort 


LONGEST 

LIFE 

SPRING 

Convenient 

hang-up hole 

Unique, high leverage handle design 

allows for cutting extra thick or tough 

upholstery, carpet and fabric 

Red cushion grip handles 

provide maximum leverage 

930

C U T T I N G 

Cutting Tools 

Since 1880, H. K. Porter ® has been the preeminent brand in industrial cutters with a worldwide reputation for quality, strength and 

durability. The extensive line of products includes manual cutters, hydraulic cutters, pneumatic cutters and accessories, designed 

to handle everything from light wires and brushes to heavy steel rods and bars. 

Increased mechanical advantage 

over manual cutters 

RATCHETING 

CABLE CUTTERS 

Superior strength cutting 

head and blade 

MANUAL CUTTERS 

Precision cutting edges 

are accurately beveled 

for specific types of 

cuts and materials 

Ratchet and chain produce 

easy, progressive cuts 

Pressed on handle grips are secure 

and allow firmer grip for user safety 

Steel tubular handles are close together 

for more cutting power with less strain 

Alloy tool steel cutting jaws, drop forged, 

precision ground for maximum wear 

resistance and longer cutting life 

Toggle joint transforms 50 pounds of hand pressure on 

handles to 4,000 pounds pressure on cutting edges of jaws 

10 

Cutting Tools 

GearWrench ® has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and 

adapters allow for easy back and forth movement required while cutting threads on either taps or dies. 

RATCHETING TAP & 

DIE DRIVE TOOLS 

Auto locking 

feature allows for 

safe removal of 

tap adapter 

Works on round and hex 

shaped dies 

Die adapter works with 

Pass-Thru® Ratchet 

and Socket System 

as well as Vortex 

socket accessories 

5° ratcheting arc with 

reversible lever eliminates 

hand over hand turning 

C U T T I N G 

Spring-loaded cap 

allows for quick-release 

of large tap adapter 

Extension adapters 

provide access in tight 

confined areas 

Patented Twist Lock Guide 

System reduces “back 

walk” of die guard 

Products are covered by one 

or more of the following patents: 

• US 6,868,759 

• US 7,231,851 

• US 7,168,346 

Extend the length of 

tap and die system by 

combining adapters 

and any standard 3/8" 

drive extension 

931

A V I A T I O N S N I P S 

SNIPS SELECTION CHART 

UPC No. 

Wiss® 

M1R, M2R, 

M3R, & M300 

Wiss® 

M6R, M7R 

Wiss® M4R 

Wiss® 

Tinner's Snips 

A & V Series Wiss® MPC3 Wiss® M5R 

Wiss® 

Special Series 

M1RS1 & M2RS1 

Wiss® 

Industrial Snips 

W Series 

Do-it-yourselfer • • • • • • 

Roofer • • • • 

Automotive • • • • • 

Drywalls • • • 

Plumber • • • • 

HVAC • • • • • • • 

Electrician • • • • 

Industrial/MRO • • • • • 

WISS® SNIPS FOR SPECIAL JOBS 

Notching & Nibbling Heavy Stock • • 

Cutting Curves • • • • 

Double Cut Snips 

• 

Cutting Titanium Inconel, Inconel 

X, & Stainless Steel 

• 


M3R Aviation Snips 

■■Straight cut, cuts straight and slight curves 

■■Cuts low carbon cold rolled steel 

■■Non-slip serrated jaw of tough molybdenum steel holds material 

firmly and uniformly spreads cutting force across blade edge 

■■Withstands strain of cutting heavy stock 

■■Spring-action for fast, effortless feed 

■■Non-slip, textured grips and safety latch 

■■Yellow handles for ease of identification 

Cat. No. UPC No. Packaging Tool Length Blade Length Cutting Capacity Product Weight Shelf Pack Qty. 

M3R 037103580214 Carded 9-3/4 in 1-1/2 in 18 Gauge Low Carbon Steel 0.90 lb 6 


■■Left cut, cuts left from tight curves to straight 







■■Red handles for ease of identification 



932



■■Right cut, cuts right from tight curves to straight 







■■Green handles for ease of identification 



M1RS1 Special Series Aviation Snips 

■■Cuts left and straight 



■■Jaws specially hardened to cut metals such as stainless steel, 

inconel, and titanium 

■■Withstands strain of cutting heavy stock and tight curves 

■■Non-slip, textured grips and safety latch for superior control 


M1RS1 037103580139 Carded 9-3/4 in 1-3/8 in 18 Gauge Stainless Steel 0.90 lb 6 

M2RS1 Special Series Aviation Snips 

■■Cuts right and straight 



■■Jaws specially hardened to cut metals such as stainless steel, 

inconel, and titanium 



10 


M2RS1 037103580191 Carded 9-3/4 in 1-3/8 in 18 Gauge Stainless Steel 0.90 lb 6 

M5R Bulldog Aviation Snips 

■■For notching or trimming extra heavy stock 

■■Non-slip, serrated jaw made of tough molybdenum steel 



■■Handy hang-up hole 


C U T T I N G 


M5R 037103580252 Carded 9-1/4 in 7/8 in 16 Gauge Low Carbon Steel 0.95 lb 6 

933


M6R Offset Aviation Snips 

■■Cuts left and straight 

■■Offset blades keep hands clear of metal 

■■Non-slip serrated jaw of molybdenum steel for compound 

lever action 








M7R Offset Aviation Snips 

■■Cuts right and straight 


■■Non-slip serrated jaw of molybdenum steel for compound 

lever action 









Repair Springs for Aviation Snips 

■■Replacement spring for the M1R, M3R, M5R, M6R, M8R, 

M10R (10 pk) 


P406 037103580924 Bagged Replacement spring for the M1R, M3R, M5R, M6R, M8R, M10R (10 pk) 0.40 lb 10 

P407 037103580931 Bagged Replacement spring for the M2R, M7R, M9R (10 pk) 0.40 lb 10 

M8R Vertical Aviation Snips 

■■Left cut, cuts left from tight curves to straight 

■■Vertical offset blades keep hands clear of material 

■■Ideal for increased reach in overhead projects 

or ground-level cutting 

■■Cuts low carbon cold rolled steel and other heavy 

gauge materials 

■■Non-slip serrated jaw blades help grip material to minimize slip 


■■Safety latch aids in tool storage and secures tool when not in 

use 




934


M9R Vertical Aviation Snips 

■■Right cut, cuts right from tight curves to straight 

■■Vertical offset blades keep hands clear of material 

■■Ideal for increased reach in overhead projects 

or ground-level cutting 

■■Cuts low carbon cold rolled steel and other heavy 

gauge materials 

■■Non-slip serrated jaw blades help grip material to minimize slip 


■■Safety latch aids in tool storage and secures tool when not 

in use 




M4R Pipe & Duct Cutting Snips 

■■Cuts any shape ducts, seams, sheet metal stock, vinyl tiles and 

plastic laminates 

■■Jaw action automatically adjusts blade clearance for squarer, 

cleaner cuts 




M4R 037103240989 Carded 9-1/4 in 9/16 in 20 Gauge Low Carbon Steel 0.95 lb 3 

MPC3 Multipurpose Snips 

■■Cuts curves, straight or any combination 

■■Used for cutting screening, hardware cloth, shingles, tile gutters, 

downspouts, and carpeting 





■■Designed for home craftsman 



MPC3 037103580221 Carded 9 in 1-3/8 in 20 Gauge Low Carbon Steel 0.74 lb 6 

MPX All-Purpose Cutter 

■■3" serrated blades provide longer cut than most tools 

■■Serrated blades grab hold and aggressively cuts through 

the material 

■■Compound action provides up to 5:1 power ratio for easy cutting 

■■Chrome-plated blades resist rust and corrosion 

■■Spring loaded for faster opening 

■■Non-slip textured cushion grips 

■■Small closed position handle design for smaller hands 


10 

C U T T I N G 


MPX 037103190635 Carded 10-1/2 in 3 in N/A 0.95 lb 6 

935


M300 Long Cut Aviation Snips 

■■Combines long cut of tinners snips with the strength of compound 

action 

■■Compound action multiplies the cutting force 

■■Great for making long, fast cuts in sheet metal, aluminum, and 

much more 

■■Cuts up to 20 gauge low carbon steel 



M300 037103126481 Carded 10-1/2 in 3 in 20 Gauge Low Carbon Steel 0.98 lb 6 

M400 Long Cut Offset Aviation Snips 

■■Offset blade helps keep material from hands 

■■Combines long cut of tinner snips with the strength 

of compound action 

■■Compound action design increases force for greater improved 

performance 

■■Longer blade length reduces cutting frequency for faster work 

■■Cuts up to 20 gauge low carbon cold rolled steel, aluminum 

and plastic 

■■Features non-slip, serrated jaws to help hold material 

during cutting 

■■Soft textured grips for comfort and safety when handling 

■■Handle latch to keep blades closed during storage or when 

not in use 



M400 037103224606 Carded 12-1/8 in 3 in 20 Gauge Low Carbon Steel 1.05 lb 6 

Straight Pattern Tinner's Snips 

■■Cuts straight and wide curves (when trimming light gauge stock) 

■■For plumbing, heating, air conditioning and roofing trades 

■■Blades individually hand edged for maximum cutting efficiency 

■■Flat face guides tool along straight line 

■■Blades of finest quality steel hot drop-forged for sharp edge, 

long life 

■■Rust resistant blades 

■■Cushion handle for comfort and better grip 



A13N 037103213907 Carded 7 in 1-3/4 in 24 Gauge Low Carbon Steel 0.54 lb 6 

A12N 037103213914 Carded 8-1/4 in 2 in 24 Gauge Low Carbon Steel 1.05 lb 6 

A11N 037103213921 Carded 9-3/4 in 2-1/4 in 24 Gauge Low Carbon Steel 1.54 lb 6 

A10N 037103213891 Carded 11 in 2-1/2 in 22 Gauge Low Carbon Steel 1.65 lb 6 

A9N 037103213938 Carded 12-1/2 in 3 in 20 Gauge Low Carbon Steel 2.21 lb 6 

936

T I N N E R ' S S N I P S 

Duckbill Combination Pattern Snips 

■■Cuts moderately tight curves left, right or straight in light stock 

■■Popular with home craftsmen and professionals 


■■Blades of finest quality steel, hot drop-forged for sharp edge 

long life 





V10N 037103213945 Carded 10-1/4 in 2-1/4 in 24 Gauge Low Carbon Steel 1.10 lb 6 

V19N 037103213990 Boxed 13 in 3 in 22 Gauge Low Carbon Steel 2.21 lb 6 

Straight Pattern 

■■Used for straight cuts and wide curves (when trimming light 

gauge stock) 


■■Flat face guides tool along straight line 


long life 





W7N 037103213969 Boxed 14-1/2 in 4 in 18 Gauge Low Carbon Steel 2.76 lb 1 

Bulldog Pattern 

■■Industrial use 

■■Greater cutting power for notching, nibbling and chopping 

heavy stock 



long life 





W5N 037103213976 Boxed 16-1/2 in 2-1/2 in 16 Gauge Low Carbon Steel 3.67 lb 1 

Offset/Bent Pattern 

■■Industrial use 




long life 

■■Rust resistance blades 


10 

C U T T I N G 


W7BWN 037103213983 Boxed 14-1/4 in 4 in 18 Gauge Low Carbon Steel 2.76 lb 1 

937

S N I P S 

12" Lightweight Aluminum Handle Snip 

■■3" cut length 

■■Sleek head design reduces cutting effort by allowing easy flow 

of material while cutting 

■■Slim nose, ideal for making cuts in tight places and reaching 

tight corners 

■■Large, wide handle loops increase cutting leverage and 

comfortably fit all hand sizes, including gloved hands 

■■Strong & durable lightweight aluminum construction 

■■Easy and quick blade replacement 


W12L 037103239983 Carded 12 in 3 in 22 Gauge Low Carbon Steel 1.00 lb 4 

14" Lightweight Aluminum Handle Snip 

■■3-1/4" cut length 

■■Sleek head design reduces cutting effort by allowing easy flow 

of material while cutting 

■■Large, wide handle loops increase cutting leverage and 

comfortably fit all hand sizes, including gloved hands 

■■Longer handle length and rounded head design improve 

cutting leverage 

■■Strong & durable lightweight aluminum construction 

■■Easy and quick blade replacement 


W14L 037103239976 Carded 14 in 3-1/4 in 22 Gauge Low Carbon Steel 1.40 lb 4 


Repair Blades for Lightweight Snips 

■■Replacement blades for W12L and W14L 


W12LRB 037103240965 Carded 12” Blade Replacment Kit for W12L 0.27 lb 1 

W14LRB 037103240958 Carded 14” Blade Replacment Kit for W14L 0.35 lb 1 

3-Blade Crimper 

■■Crimps male fitting end to connect guttering, downspouts 

or metal pipe 

■■Optimal handle span for maximum power and comfortable 

operating range 

■■Non-slip cushion grips for superior comfort and control 

Cat. No. UPC No. Packaging Throat Depth Length Product Weight Shelf Pack Qty. 

WC3S 037103239914 Carded 1-1/4 in 9-3/4 in 0.85 lb 3 

938

H V A C T O O L S 

5-Blade Crimper 

■■For crimping round metal pipe to create a male fitting end 

■■Crimps heavier gauge pipe up to 22 gauge galvanized steel 





WC5L 037103239921 Carded 1-5/8 in 10 in 1.00 lb 3 

WC5S 037103239891 Carded 1-1/4 in 9-3/4 in 0.95 lb 3 

Hand Notcher 

■■Cuts 30 degree V shaped cut in sheet metal 

■■Gives clean notch without slipping at corners and take-off tabs 



WHN1 037103239969 Carded 13/16 in 8-3/4 in 0.95 lb 3 

Hand Seamer 

■■Used to bend and flatten sheet metal 




■■3-1/4" jaw width and 1-1/4" maximum seam depth 

■■1/4" depth markings 

10 

Cat. No. UPC No. Packaging Jaw Capacity Jaw Width Length Product Weight Shelf Pack Qty. 

WS3 037103240026 Carded 1/4 - 1 1/4 3-1/4 9-1/4 in 1.35 lb 3 

Offset Hand Seamer 

■■Used to bend and flatten sheet metal 

■■Ideal for working in confined areas 




■■3-1/4" jaw width and 1-1/4" maximum seam depth 

■■1/4" depth markings 

Cat. No. UPC No. Packaging Jaw Width Jaw Capacity Length Product Weight Shelf Pack Qty. 

WS4 037103240033 Carded 3-1/4 1/4 - 1 1/4 9 in 1.40 lb 3 

WS6 037103239990 Carded 6 1/4 - 1 1/4 9-1/4 in 1.90 lb 2 

C U T T I N G 

939

H V A C T O O L S 

Cable Tie Tensioning Tool 

■■Designed to install both heavy and light duty nylon cable ties 

■■For tightening nylon ties when securing flex duct 

to take-off collars 

■■Easy to operate cut-off mechanism that trims excess cable strap 

■■Comfortable cushion grip handles and internal stop 

Cat. No. UPC No. Packaging Cable Tie Width Length Product Weight Shelf Pack Qty. 

WT1 037103240019 Carded 3/8 and Thinner 7-1/2 in 0.90 lb 4 

12" Folding Tool 

■■Commonly used for folding channels and making long uniform 

bends in sheet metal 

■■3/8" and 1" depth folding channel to ensure proper 

depth alignment 

■■Constructed of heavy 16 gauge steel that keeps folding channels 

from widening and ensures precise and accurate bends 

■■Ideal for folding drive cleat channels with 3/8" depth to make 

longer, wider folds in register boots, end caps, plenums, etc. 

Cat. No. UPC No. Packaging Folding Channel Depths Product Weight Shelf Pack Qty. 

WF12 037103239945 N/A 3/8 & 1 1.30 lb 4 









■■Ideal for making long, uniform folds 


WF18 037103239952 N/A 3/8 & 1 2.00 lb 4 








■■Ideal for making long, uniform folds 


WF24 037103239938 N/A 3/8 & 1 2.70 lb 4 

940

U T I L I T Y K N I V E S 

Ratcheting Pipe Cutters 

■■Easy replaceable cutting wheel 

■■For use in ratchet pipe cutting tools 

■■Made from high-carbon chrome steel 

■■Cuts copper, brass, aluminum and thin-wall conduit material 

■■Installs easily with small standard screwdriver 

■■Two sizes to choose from in convenient 2-pack 


WRPCLG 037103222442 Carded Wiss Ratchet Pipe Cutter, Large, cuts 5/16" - 1-1/8" Pipe Diameter 0.77 lb 3 

WRPCMD 037103222435 Carded Wiss Ratchet Pipe Cutter, Medium, cuts 1/4" - 7/8" Pipe Diameter 0.76 lb 3 

WRPCSM 037103222428 Carded Wiss Ratchet Pipe Cutter, Small, cuts 1/8" - 1/2" Pipe Diameter 0.40 lb 3 

WRPCWH1 037103223654 Carded Replacement Cutting Wheel for Small Ratcheting Pipe Cutter, 2 pk 0.02 lb 6 

WRPCWH2 037103223661 Carded Replacement Cutting Wheel for Med & Large Ratcheting Pipe Cutters, 2 pk 0.02 lb 6 

Auto-Retracting Utility Knife 

■■Blade retracts automatically the moment it loses contact with 

the material being cut – even if the user is still holding the blade 

slider forward in the ‘open’ position 

■■Helps reduce workplace injuries, lowering lost time and 

increasing productivity 

■■Accepts all standard type utility knife blades 

■■Quick and easy blade change 


WKAR1 037103240262 Carded 0.40 lb 5 

Quick-Change Folding Blade Utility Knife 

■■Blade safely folds into handle for compact size and easy storage 

■■Quick blade change for easy and fast replacement 

■■Soft grip ergonomic handle design for increased comfort 

■■Accepts all standard type utility knife blades 

■■Includes bonus 10 pack of blades 

10 


WKF1 037103250841 Carded 0.55 lb 5 

Quick-Change Comfort Grip Utility Knife 

■■Retractable utility knife with 11 positions 

■■Quick change blade release and reload 

■■Magazine blade storage holds 3 blades, not included 

■■Comfort grip for ease of use and slip protection 

■■Safety string cutter with recessed blade 

■■Warning: Sharp blade included, use care when handling 

C U T T I N G 


WK500V 037103209726 Carded 0.35 lb 5 

941

U T I L I T Y K N I V E S 

Fixed Blade Knife 

■■DIY, professional and industrial uses 

■■Heavy-duty, fixed blade knife 

■■Uses all standard replacement utility blades 

■■Metal case painted red for easy visibility 

■■Knife comes with 3 blades 


WK9V 037103151377 Carded 0.36 lb 5 

Heavy-Duty Retractable Utility Knife 



■■Features zinc die-cast construction for added durability 

■■Non-slip handle for added safety, four blade positions for versatility 

■■Uses standard utility knife blades 

■■Knife includes 3 blades 


WK5V 037103151544 Carded 0.61 lb 5 

Retractable Utility Knife 


■■Popular all-purpose retractable knife 

■■Easy-run slide uses all standard replacement blades 




WK8V 037103151407 Carded 0.38 lb 5 

Snap Knife 

■■Suitable for all DIY uses 

■■Molded from high impact plastic for long-term service 

■■Metal track to keep the blade secure in use 


WSK2V 037103151513 Carded 0.19 lb 5 

■■3" Lock Blade with Serrated Edge for Rough Cuts 

■■Standard Folding Utility Knife for Sharper, Delicate Cuts 

■■Easy Blade Release 

■■Dual Material Grip 

■■Storage Pouch Included 

Folding Utility Knife 


82881 099575828812 Carded 0.48 lb 1 

942

S C I S S O R S A N D S N I P S 

Utility Blades 

■■Wiss Utility Knife Blades are High Quality Steel 

■■Replacement Blades Fit most Utility Knives 

■■Heavy-Duty Blades with Sharp Points 

■■Cat. No. RWK18D Features Round Tips to Help 

Prevent Puncturing 

Cat. No. UPC No. Packaging Number of Blades Product Weight Shelf Pack Qty. 

RWK14D 037103151773 Carded 100 0.97 lb 1 

RWK14V 037103151445 Carded 5 0.02 lb 10 

RWK16V 037103151414 Carded 5 0.06 lb 10 

RWK18D 037103265326 Carded 100 0.96 lb 5 

Home and Craft Scissors 

■■Strong, high quality stainless steel blades for 

corrosion resistance 

■■Adjustable pivot to change cutting tension for best feel 

■■Straight blades can be sharpened 

■■Hard plastic handles clean easily 

■■Lightweight 

Cat. No. UPC No. Packaging Tool Length Blade Length Product Weight Shelf Pack Qty. 

W812 037103211286 Carded 8-1/2 in 3-1/2 in 0.26 lb 4 

2 Pc. Home, Craft, and Sew Scissor Set 

■■Strong, stainless steel blades for corrosion resistance 

■■Sharp points cut cleanly through the tip 

■■Long lasting, precision ground straight edges can be sharpened 

■■Adjustable pivot screw for best feel 

■■Soft touch handles for added comfort 


10 


WHCS2 037103211316 Carded 0.44 lb 4 

Shop Shears 



■■Serrated lower blade for better grip on materials being cut 

■■Cutting notch on lower blade for rope and twine 

■■Safety point 

■■Adjustable pivot to change cutting tension for best feel 

■■Hard plastic handles clean easily 


C U T T I N G 


W912 037103211279 Carded 10 in 4-1/4 in 0.33 lb 4 

943


Take-Apart Utility Scissors 



■■Take apart blades for easy clean 

■■Hard handles are dishwasher safe 



W8TA 037103211293 Carded 8 in 4 in 0.25 lb 4 

Easy Snip Utility Shears 



■■Textured, molded handles for secure, comfortable grip 

■■Spring assist action minimizes fatique 

■■Wire cutting notch in lower blade 

■■Thumb latch secures blades closed for storage 



WEZSNIP 037103211309 Carded 8-1/2 in 4 in 0.18 lb 4 


Industrial Shears 

■■Professional dressmaker and industrial use 

■■Finest quality cutlery steel 

■■Hot drop-forged nickel-plated blades 

■■Patented SET-EASY ® pivot 

■■Precision ground blades for sharper cutting edges & longer 

blade life 


27N 037103223326 Boxed 7 in 2-3/4 in 0.30 lb 6 

28N 037103223340 Boxed 8 in 3-3/8 in 0.45 lb 6 

29N 037103223395 Boxed 9 in 4 in 0.45 lb 6 

426N 037103223296 Carded 6-1/4 in 2-3/8 in 0.22 lb 6 

427N 037103223333 Carded 7 in 2-3/4 in 0.30 lb 6 

428N 037103223357 Carded 8 in 3-3/8 in 0.40 lb 6 

Heavy Duty Industrial Shears 

■■Commonly used in cutting fabrics, upholstery, & composite 

materials 


blade life 

■■Handle rings designed to comfortably fit users hands 

■■SET-EASY pivot adjustment easily & securely adjust to users 

preference 

■■Hot dropped forged nickel plated blades 


W20 037103240132 Carded 10-3/8 in 4-3/4 in 0.88 lb 6 

W20LH 037103240187 Carded 10-3/8 in 5 in 0.88 lb 6 

W20P 037103240149 Carded 10-3/8 in 5 in 0.88 lb 6 

W22N 037103240200 Carded 12-1/2 in 6 in 1.20 lb 6 

W22P 037103240217 Carded 12-1/2 in 6 in 1.20 lb 6 

944


Upholstery, Carpet, Drapery, and Fabric Shears 

■■Thick, heavy duty blades for cutting multiple layers 

& tough materials 

■■Ideal for cutting upholstery, carpet, and drapery 

■■Precision ground blades for sharper cutting edges and longer 

blade life 


■■SET-EASY pivot adjustment easily & securely adjust 

to users preference 



W20W 037103240194 Carded 10-3/8 in 5 in 0.88 lb 6 

W22W 037103240231 Carded 12-1/2 in 6 in 1.20 lb 6 

Uphostery, Carpet, and Fabric Shears 

■■Ideal for cutting carpet, synthetic fibers & composite materials 

■■One blade ground to knife edge for faster, cleaner cutting 


blade life 


■■SET-EASY pivot adjustment easily and securely adjust to users 

preference 



W1225 037103240163 Carded 10-3/8 in 5 in 0.88 lb 6 


High Leverage Industrial Shears 

■■Blade tips rounded for extra protection 


blade life 


■■Red cushion grip handles that give maximum comfort 





W1225HLSP 037103240170 Carded 10-3/8 in 5 in 0.88 lb 6 

Double Rounded Shears 

■■Blade tips rounded for extra protection 


blade life 



10 

C U T T I N G 


W20SP 037103240156 Carded 10-3/8 in 5 in 0.88 lb 6 

945


Industrial Straight Trimmers 

■■Ideal for cutting various fabrics & upholstery 


blade life 






37N 037103223302 Boxed 7 in 2-7/8 in 0.20 lb 6 

38N 037103223364 Boxed 8-1/4 in 3-5/8 in 0.35 lb 6 

438N 037103224200 Carded 8-1/4 in 3-5/8 in 0.40 lb 6 


Belt and Leather Cutting Scissors 

■■One blade is serrated and one blade edged 

■■Ideal for cutting leather & welt cord 






W8BLT 037103240255 Carded 8-1/2 in 3-3/8 in 0.75 lb 6 


Pinking Shears 

■■Pinks and cuts in one operation, saving time and labor 

■■Sawtooth blade design reduces the time spent finishing edges 

on fabrics 

■■Cuts a wide range of fabrics and leaves a ruffled edge that will 

not fray 

Cat. No. UPC No. Tool Length Blade Length Product Weight Shelf Pack Qty. 

CB8 037103255150 8-1/4 in 4-1/2 in 0.55 lb 6 

Pocket Scissors 

■■Hot drop-forged solid steel 

■■Blades are a flat pattern with double blunts points 

■■Fully nickel plated 

■■Ring handle 


166 037103580795 Boxed 6-1/4 in 2-3/4 in 0.20 lb 6 

946


Sewing and Embroidery Scissors 

■■Specially designed for intricate cutting, embroidery and 

fine needlework 

■■Hot drop-forged and nickel-plated 

■■Ring handle 

■■Double sharp points 

■■Flat pattern 

■■Attractive vinyl package 


764 037103581167 Carded 4-1/8 in 1-1/4 in 0.10 lb 6 

765 037103581174 Carded 5-1/8 in 2 in 0.10 lb 6 

Quick-Clip® Lightweight Speed Cutters 

■■Stainless steel replaceable blades 

■■Positive spring-action re-opens blades for fast cutting 

■■Heavy duty contour design 

■■1570B comes with sharp points, 1571 with blunt points 

■■Industrial PVC plastic handle 


1570B 037103581266 Boxed 4-3/4 in 1 in 0.05 lb 6 

1571B 037103581273 Boxed 4-3/4 in 1 in 0.05 lb 6 

Quick-Clip® Replacement Blades 

■■Stainless steel replaceable blades 

■■9328 is Replacement Blades for 1570B 

■■9329 is Replacement Blades for 1571B 

10 


9328 037103581808 Bagged 0.20 lb 

9329 037103581815 Bagged 0.20 lb 

Industrial Thread Nippers 

■■Quality hot drop-forged cutlery steel 

■■Self-opening spring-action assures fast, effortless cutting 

■■Fully nickel-plated 

■■Blunt points 

■■TC1 with Sharp Points 

■■TC5 with Blunt Points 

C U T T I N G 


TC1 037103580153 Bagged 4-3/4 in 1-1/8 in 0.13 lb 6 

TC5 037103580276 Bagged 4-5/8 in 1 in 0.13 lb 6 

947


Industrial Shears 

■■Used extensively in the poultry industry 

■■Forged from high carbon steel 

■■Nickel-plated blades and handle 

■■SET-EASY pivot 

■■New enlarged lower ring for added comfort 


1DSN 037103223371 Boxed 8-1/8 in 2-3/4 in 0.45 lb 6 

Poutlry Processing Shears 

■■Used extensively in poultry processing 

■■Made from carbon steel 

■■Special ball point for poultry processing 

■■Nickel-plated blades and handle 

■■Hot drop-forged commercial 

■■Adjustable nut 


41DBN 037103223210 Boxed 8-5/8 in 2-7/8 in 0.50 lb 6 


High Leverage Shears 

■■Hot drop forged commercial nickel plated solid steel 

■■Serrated nickel-plated blades grips cutting material 

■■Black, curved handle designed for comfort and fatigue reduction 

■■Cuts wire used in floral designs and other similar crafts 


2DAN 037103222886 Boxed 7-3/4 in 2 in 0.50 lb 6 


■■Black baked enamel handle 

■■Nickel-plated blades with sharp points 

Rug Shears for Hooked and Candlewick Rugs 


RS1N 037103223319 Boxed 8 in 2-7/8 in 0.35 lb 6 

Kitchen Shears 

■■Hot drop-forged stainless steel 

■■Cut a variety of materials including twine, rope, cardboard, light 

metal 

■■Ideal for many miscellaneous jobs in and around the home 

■■One blade serrated 

■■Black baked enamel handle 


KSRN 037103223500 Carded 8 in 2-5/8 in 0.28 lb 6 

948


Industrial Trimming, Grape Thinning & Orchid Snips 


■■Straight, polished blades with adjustable nut 

■■Heavy pattern 

■■Coil spring handle opens blades after each cut 

■■Black baked enamel handle with closing latch 


C4ASN 037103223487 Boxed 8 in 2-1/4 in N/A 0.44 lb 6 

Light Metal-Cutting Snips 

■■Used in electronic and appliance light metal cutting 

■■Comes with polished straight blades 


J7SN 037103223494 Boxed 7 in 1 in N/A 0.25 lb 6 

Electronics and Filament Scissors 


■■Coil spring handle opens blades after each cut 

■■Straight blades 

■■Polished blades with black handle 

10 


605N 037103223470 Boxed 5 in 3/4 in 0.22 lb 6 

Electrician's Scissors 

■■Double stripping notch for 19 gauge (0.035) and 23 gauge (0.022) 

wire 


■■Is serrated along entire bottom blade 

■■Scraper and file on back edge of blade 

■■Standard full drop run 

■■Fully nickel-plated 

■■Packaged in vinyl pouch 


175E 037103580801 Boxed 5-1/4 in 1-3/4 in 0.20 lb 6 

175E5 037103580825 - - - 0.20 lb - 

175E5V 037103582188 Carded 5-1/4 in 1-3/4 in 0.20 lb 6 

C U T T I N G 

949

C U T T I N G 

Cutting Tips 

1. When heavy cutting is involved, place one handle of the tool on the ground using foot pressure. This allows more power 

to be transferred to the cutting edges, and permits the cutting force to be applied to the upper handle. 

2. Use the correct cutting tool for the type, size, and hardness of the metal to be cut. Failure to do so can result in product 

damage or injury. 

3. Keep cutter jaws at right angles to piece being cut. Cutting diagonally may twist jaws and damage head. 

4. Do not twist or pry with tool while cutting. 

5. Do not exceed the full cut on a material whose hardness is unknown. Test hardness with slow pressure to see 

if material surface is being cut. The size of the metal you are cutting is not as important as material hardness. 

6. Do not exceed the cutter capacity that is marked on the jaw of the tool or its rating capacity in this catalog. 

7. Keep jaw bolts tight and joints oiled at all times. Inspect tool frequently for damage and replace worn parts. 

8. Maintain the original jaw bevel angles when sharpening out of line or chip cutting edges. 

Safety Do's and Don'ts 


Wear your gloves and safety glasses at all times! 

Do wear safety shoes. 

Do remove oil or grease from your hands, from tools and from the floor and area where you will be working. 

Do remember that metal can fly when cut. The harder the metal, the farther it will fly, and possibly cause injury. 

Do warn those in the area when you intend to use a cutter and protect others. 

Do use all tools as recommended. 

Don’t attempt to use a cutting, hand or power tool, until you fully understand its use. 

Don’t forget that metal fragments may fly and cause injury. 

Don’t use cutters for any application except those listed in this catalog. 

Don’t use H.K. Porter cutters on energized circuits, wire, or cable. 

Don’t use cutters that are damaged or need parts replaced due to wear. 

Don’t use cutter products on energized circuits, wire or cables. 

Safety Precautions 

Hard metals may snap off or fly through the air when cut. Always wear safety glasses and warn workers nearby to prevent injury from flying metal. Take precautions such as 

wrapping a cloth or rag around the cutting jaws to contain fragments during cutting. 

READ AND UNDERSTAND ALL DIRECTIONS BEFORE OPERATING ANY H.K. PORTER® MANUAL, HYDRAULIC OR PNEUMATIC TOOL 

950

C U T T I N G 

How to Determine What Type of Cutter to Use 

1. What is the material to be cut? 

2. What size is the material to be cut? 

Capacities of all hand-operated cutters are shown opposite each catalog listing. 

Power tool capacities are shown in the Power Tool Selector chart. Do not exceed 

listed capacities. 

3. How hard is the material to be cut? 

Many of the materials illustrated in the chart below are made in varying degrees 

of hardness. The maxmum hard ness ratings that each hand and power tool is 

designed to cut are shown under each tool in this catalog. 

Extra Hard Metals: Up to Brinell 455/Rockwell C48 

Hard Metals: Up to Brinell 400/Rockwell C42 

Medium Hard Metals: Up to Brinell 300/Rockwell C31 

Soft Metals: Up to Brinell 200/Rockwell C15 

4. Will numerous or few cuts be made in a day? 

The frequency of cuts to be made should be taken into consideration when 

choosing a cutter. HKP manufactures inexpensive hand cutters for light-duty 

work, heavy-duty cutters for tougher jobs, and hydraulic and pneumatic cutters 

for extremely hard materials and production cutting. 

5. Is speed a factor in the cutting? 

Choose the proper cutter to fit the job requirements, whether an occasional cut 

is called for or fast, continuous, industrial production cutting. 

Still not sure? 

Send material samples to: 

Apex Tool Group - Sumter Plant 

Industrial Park 

Sumter, SC 29154 

Attn: HKP Test Material 

Note: Provide answers to as many of the questions as possible. 

WARNING 

• Always wear safety glasses/goggles when cutting. 

• Cut in a safe area. Consider the safety of others. 

• The harder the material being cut, the greater it is to become airborn 

during cutting. 

• Use tools correctly! (Refer to “Engineering Information” section of this catalog) 

• Use the correct tool for the work being performed. 

• Maintain tools, power supplies, and hoses in safe working condition. 

Jaw Designs 

There are four basic jaw designs. They are engineered to give long, trouble-free life and the most efficient cutting of the materials which they are designed to cut. 

10 

ANGULAR JAWS 

30° offset jaws have clipper-cut blades, 

designed for cutting close or flush to 

a surface. Cuts soft or medium-hard 

material. 

ALL-PURPOSE JAWS 

Can have center-or clipper-cut blades 

used for broad cutting applications. 

SHORT-NOSED JAWS 

Center-cut, carbide-tipped blades for 

cutting hard- and nonalloy chains and 

padlock hasps. 

HEAVY-DUTY STRAP JAWS 

Straps keep the cutting edges aligned 

under the most demanding applications. 

Cutting Blades 

Four different cutting blade styles are available for specific types or broad ranges of cutting applications. 

C U T T I N G 

CENTER-CUT BLADES 

Slightly rounded cutting edges, 

beveled on both sides, broaden 

cutting applications. 

CLIPPER-CUT BLADES 

Blades are beveled on only one side for 

smooth flush cuts that are close 

to workpiece. 

SHEAR-CUT BLADES 

Designed to cut coarse- or finestrand 

cable with minimal strand distortion. 

END-CUT BLADES 

Blades are at right angles to handles for 

easier handling and “head-on” close 

cutting of materials. 

951

C U T T I N G 

How to Sharpen Cutter Jaws 

• Remove nicks in jaws by filing straight across cutting edges 

• On jaws with equal bevels, file equally from each bevel, keep file flat against bevel 

• On jaws with one large bevel, file on that bevel. Small bevel must also be restored 

• Jaws should not be razor sharp 

• Approximately 1/64” (0.4mm) should remain flat to form strong, durable edge 

• To sharpen shear-cut blades (blades that pass each other like scissors) remove 

nicks by filing straight across cutting edges 

• Finish by running a flat file over inner jaw surface to remove burrs 

• Adjust tool according to the instructions below 

Shaded area shows part of cutting edge 

which may be filed 

How to Adjust Cutter Jaws 


• An adjustment screw is located on the cutter handle above the toggle joints 

• If jaw edges are too far apart with handles closed, tighten adjusting screw, this 

brings cutting edges together 

• Cutting edges should be 1/64” (0.4mm) apart for longest jaw life 

• Oil all joints and keep free of debris 

• If jaw edges are too close together with the handles apart, loosen adjusting screw 

until it disappears from the narrow slot in the handle 

• Make a cut with the tool in this position (cut will force the slot inward) 

Nicholson® File Recommendations 

For Jaw Type 

Straight 

Curved 

Straight with Notch 

Notched 

Use File Type 

6", 8", or 10" Mill Bastard 

8", 10", or 12" Half Round Bastard 

8" or 10" Mill Bastard with One Round Edge 

8" or 10" Round Bastard 

• Try to close the handles. If they do not close completely and jaw edges are 1/64” 

(0.4mm) apart, tighten adjusting screw to meet the handle on far side of slot 

• Oil all joints and keep free of debris 

• If jaws are too far apart with handles closed after making cut with adjusting screw 

backed off, tighten adjusting screw as explained above 

• To sharpen shear-cut blades (blades that operate, like scissors), remove nicks by 

filing straight across the cutting edges 

• Finish by running a flat file over inner blade surface to remove burrs. 

• Choose file size according to size of jaw and/or radius of curve 

• Half round files are the most versatile 

952

H A N D O P E R A T E D C U T T E R S 

Industrial Grade, Center Cut Cutters 

■■General plant maintenance tool 

■■Drop-forged precision ground alloy tool steel jaws with centercut 

blades 

■■Cuts soft, medium, or hard materials 

■■Maximum hardness of material to be cut: Brinell 455/ 

Rockwell C48 

■■Lockplate keeps jaws from loosening 

■■Toggle joints turn 50 lbs hand pressure to 4000 lbs 

cutting pressure 

■■Screw-type adjustment realigns edges 

■■Steel handles with rubber grips 

■■NEVER use any H.K. Porter cutters on energized circuits, wire, 

or cable! 


Soft and Medium Hard Materials 

(Up to Brinell 300, Rockwell C31) 

Hard Materials (Up to 

Brinell 455, Rockwell C48) 

Replacement Cutterhead/ 

Jaws Cat. No. 

Product Weight 

1490MC 037103913777 Boxed 14 in 5/16 in, 8 mm 3/16 in, 5 mm 1413C 3.20 lb 






General Purpose Center Cut Bolt Cutters 

■■Series 2000 Bolt Cutter 

■■Drop-forged jaws with center-cut blades 

■■Heat treated for wear resistance and long cutting life 

■■Cuts soft, and medium/hard materials 


Rockwell C31 



■■Precision cast, 1-piece, aluminum alloy handles with rubber grips 


or cable! 


Soft and Medium Hard Materials (Up 

to Brinell 200, Rockwell C15) 




Jaws Cat. No. 


1490AC 037103040978 Boxed 14 in 5/16 in, 8 mm 1/4 in, 6 mm 1413AC 2.60 lb 



10 

C U T T I N G 

953


Industrial Grade, Clipper Cut Cutters 

■■All-purpose jaws with clipper-cut blades for close or flush cutting 

■■Not for cutting hard materials 


Rockwell C31 






or cable! 







Jaws Cat. No. 


1490MNE 037103913784 Boxed 14 in 5/16 in, 8 mm 1/4 in, 6 mm 1413NE 3.10 lb 






General Purpose, Center Cut Cutters 

■■All-purpose jaws with center-cut blades 

■■Cuts soft, medium, and hard metals 


Rockwell C48 


■■Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure 


■■Strong, lightweight fiberglass handles 

■■Very popular cutter 


or cable! 







Jaws Cat. No. 


0090FC 037103905451 Boxed 18-1/4 in 3/8 in, 10 mm 1/4 in, 6 mm 0013C 3.60 lb 




954


Angular Style Cutters 

■■Angular-style jaws with clipper-cut blades 

■■30° offset to keep work in view 

■■Keeps hands clear of work surface while cutting 

■■Cuts soft and medium materials 


Rockwell C31 


or cable! 




Hard Materials (Up to Brinell 

300, Rockwell C31) 


Jaws Cat. No. 


1490MAF 037103913760 Boxed 14 in 5/16 in, 8 mm 1/4 in, 6 mm 1413AF 3.15 lb 

0190MA 037103907127 Boxed 24 in 7/16 in, 11 mm 3/8 in, 10 mm 0113A 5.50 lb 

0390MA 037103909329 Boxed 36 in 9/16 in, 14 mm 1/2 in, 13 mm 0313A 13.13 lb 

Heavy Duty Cutters - Steel Handles 

■■Recommended for the most demanding hand 

cutting applications 

■■Heavy-duty straps support the jaws 


Rockwell C48 





■■Tubular steel handles 


or cable! 

Cat. No. UPC No. Packaging Length Hard Metal and Wire Mesh Reinforcing Rod and Bar Replacement Cutterhead/Jaws Cat. No. Product Weight 

0190MCX 037103907165 Boxed 24 in 5/16 in, 8 mm 5/16 in, 8 mm 0113CX 6.40 lb 

0290MCX 037103908100 Boxed 30 in 3/8 in, 10 mm #3 Bar, 3/8 in, 10 mm 0213CX 9.25 lb 

0390MCX 037103909350 Boxed 36 in 7/16 in, 11 mm 7/16 in, 11 mm 0313CX 17.50 lb 

0590MCX 037103910813 Boxed 42 in 1/2 in, 13 mm #4 Bar, 1/2 in, 13 mm 0513CX 21.80 lb 

10 

Heavy Duty Cutters - Fiberglass Handles 

■■Recommended for the most demanding hand 

cutting applications 



Rockwell C48 




■■Lightweight, fiberglass handles 

■■Popular cutter 


or cable! 

C U T T I N G 

Cat. No. UPC No. Packaging Length Hard Metal and Wire Mesh Reinforcing Rod and Bar Replacement Cutterhead/Jaws Cat. No. Product Weight 

0190FCX 037103907080 Boxed 24 in 5/16 in, 8 mm 5/16 in, 8 mm 0113CX 5.70 lb 

0290FCX 037103008060 Boxed 30 in 3/8 in, 10 mm #3 Bar, 3/8 in, 10 mm 0213CX 9.50 lb 

0390FCX 037103909312 Boxed 36 in 7/16 in, 11 mm 7/16 in, 11 mm 0313CX 11.50 lb 

955


Heavy Duty Cutters with Keeper 

■■Center cut jaws 


■■Cuts hard metals and bolts, rods, bars, ACSR, and ACAR 




■■Swing-away keeper holds EHS guy wire and pre-stressed cable 

in position 

■■Prevents cable spreading or deforming, gives complete cut 

of all strands 


or cable! 

Cat. No. UPC No. Packaging Length Prestressed EHS Guy Strand, ACSR and ACAR Cable Replacement Cutterhead/Jaws Cat. No. Product Weight 

0190MCK 037103907141 Boxed 24 in 5/16 in, 8 mm 0113MCK 6.50 lb 

0390MCK 037103909343 Boxed 36 in 7/16 in, 11 mm 0313MCK 14.91 lb 


End Cut Nipper 

■■End-cut blades are at right angles to handles 

■■Easier handling and head-on, close cutting in confined spaces 

■■Cuts soft materials 


Rockwell C15 






or cable! 

Cat. No. UPC No. Packaging Length Soft Steel, Non-Ferrous Material Wrought Iron Soft Bolts, Rivets, Screws, Wire Product Weight 

0190ME 037103907172 Boxed 24 in 5/16 in, 8 mm 5/16 in, 8 mm 5/16 in, 8 mm 5.38 lb 

Bolt Cutter/Cable Cutter 

■■Cuts soft, medium hard, and hard materials 

■■Cuts metal rod to 7/16" diameter 

■■Strap cuts wire rope to 1/4" diameter 


Rockwell C48 






or cable! 







Jaws Cat. No. 


0190MCS 037103907158 Boxed 24 in 7/16 in, 11 mm 5/16 in, 8 mm 0113MCS 6.40 lb 

956


Heavy Duty Cutters 

■■Extremely strong, durable tool 

■■Short-nosed jaws with high-tempered, center-cut blades 

■■Cuts hard, non-alloy chain 


Rockwell C48 





■■Heavy duty straps 


or cable! 


Hard and Non-Alloy Chain (Up to Brinell 

455 Rockwell C48) Padlocks Non-Alloy 


Jaws Cat. No. 


0190MHC 037103907189 Boxed 24 in 5/16 in, 8 mm 5/16 in, 8 mm 0113HC 6.30 lb 

0390MHX 037103909367 Boxed 36 in 7/16 in, 11 mm 7/16 in, 11 mm 0313HCX 16.90 lb 

0590MHX 037103910820 Boxed 42 in 1/2 in, 13 mm 1/2 in, 13 mm 0513HCX 18.15 lb 

Hand-Operated, Work Station Cutters 

■■4 blade styles: shear-cut, center-cut, clipper-cut, and hard chain 

■■Other cutterheads available on order 

■■Cuts non-ferrous materials, soft, medium, and hard steel, 

non-alloy chain, and wire rope 

■■Maximum hardness of materials to be cut:Brinell/Rockwell 455/ 

C48, and 300/C31 

■■21" handle 

■■Can be mounted to bench or work station 

■■Base measures 3x6" (76x152mm) 

■■Weighs 8 lbs. (4 kg) 


Brinell 

Hardness 

Rockwell 

Hardness 

Soft Steel, Non- 

Ferrous Material Medium Steel Dia. Hard Steel Dia. 

Non-Alloy 

Chain 

Wire Rope 

7190C 037103922809 Boxed 400 C48 3/8 in, 10 mm 5/16 in, 8 mm 1/4 in, 6 mm - - 8.00 lb 

7190HC 037103922830 Boxed 400 C48 - 1/4 in, 6 mm 1/4 in, 6 mm 1/4 in, 6 mm - 8.50 lb 

7190NE 037103922847 Boxed 300 C31 3/8 in, 10 mm 5/16 in, 8 mm - - - 7.80 lb 

7190TN 037103922908 Boxed 400 C42 - - - - 3/8, 10 mm 8.50 lb 

Shear Type Hand Operated Cable Cutters 

■■Lightweight, rugged cutter 

■■Drop-forged, alloy tool steel jaws with shear-cut blades 

■■Cuts copper or aluminum, power and communications cable 

■■Fiberglass handles for 2-handed control 


or cable! 

Product 

Weight 

10 

C U T T I N G 

Cat. No. UPC No. Packaging Length Copper Power Cable Aluminum Power Cable 

Communication 

Cable 


Jaws Cat. No. 


0290FCS 037103908063 Boxed 25-1/2 in 500 MCM 750 MCM 1 3/8, 35 mm 0213CSS 4.90 lb 

0390FCS 037103909305 Boxed 32 in 750 MCM 1200 MCM 1 3/4, 44 mm 0313FCS 8.00 lb 

957


Shear Type Cable Cutters 

■■Notched, shear-cut blades hold and lock cable 

in cutting position 

■■Cuts steel cable, coarse- or fine-stranded cable with 

minimal distortion 

■■Cuts wire rope with minimal distortion 





or cable! 

Cat. No. UPC No. Packaging Length Wire Rope Aircraft Cable Hard Stainless Steel Cable 

Replacement Cutterhead/Jaws 

Cat. No. 


1490MTN 037103913807 Boxed 14 in 1/4 in, 6 mm 1/4 in, 6 mm 1/4 in, 6 mm 1413TN 2.80 lb 




B Strand Cutter 

■■Support cable only up to 5/16" 

■■Notched, shear-cut blades hold and lock cable in cutting position 

■■Cuts self-supporting steel cable with minimal distortion 

■■Cuts coarse or fine-stranded cable with minimal distortion 


or cable! 


Cat. No. UPC No. Packaging Length Capacity Replacement Cutterhead/Jaws Cat. No. Product Weight 

0190MTQ 037103907233 Boxed 24 in 5/16 in 0113TQ 5.00 lb 

ACSR, Wire Rope and Cable Cuttter 

■■An economical tool for general cutting 

■■Shear-cut blades 

■■Cuts soft and hard steel cable, wire rope, and small ACSR cable 


or cable! 

Cat. No. UPC No. Packaging Length Wire Rope ACSR Copper, Aluminum Product Weight 

0290FHJ 037103908070 Boxed 28 in 3/8 in, 10 mm 7/16 in, 11 mm 1 in, 25 mm 6.60 lb 

Swaging Tool 

■■For crimping cable ferrules and stops 

■■Strap cuts wire rope to 1/4" 

■■Includes sizes 1/16" 3/32" 1/8" 5/32" and 3/16" 


or cable! 

Cat. No. UPC No. Packaging Length Capacity Product Weight 

0190NSL 037103152688 Boxed 25 in 1/16 - 3/16 in 7.00 lb 

958


Communications Cable Cutters 

■■Shear-cut blades give clean, sharp cut with minimal distortion 

■■Cuts lead - and rubber-covered communications cable only 

■■Do NOT cut hard cable, ACSR, self-supporting strand, or steel 


or cable! 

Cat. No. UPC No. Packaging Length Communications Cable Only Replacement Handle/Blade Assy Cat. No. Product Weight 

0190CSP 037103907066 Boxed 23-1/2 in 1 in, 25 mm 0119CSP 5.25 lb 

0390CSP 037103909275 Boxed 37 in 2 1/4 in, 57 mm 0319CSS 12.70 lb 

Rebar Cutter and Bender 

■■Rugged contractor’s tool 


■■Cuts and bends to 90° or 180° 

■■Mounts easily on most flat surfaces to enhance leverage and 

increase safety 

Cat. No. UPC No. Packaging Length Max. Capacity Replacement Cutterhead/Jaws Cat. No. Product Weight 

0590RBJN 037103222916 Boxed 52 in 5/8 in 0513RBJN 44.00 lb 

10 

Compact, Electric Cable Cutter 

■■High-leverage jaws with shear-cut blades 

■■Do NOT cut steel or ACSR 

■■Industrial, non-slip grips 

■■Compact cutter fits into most tool pouches 

■■NOT an insulated tool 

■■Blister packed for easy point-of-purchase display 


or cable! 

Cat. No. UPC No. Packaging Length Copper Cable Aluminum Cable Product Weight Shelf Pack Qty. 

0890CSJ 037103911919 Carded 9-1/2 in 2/0 4/0 0.85 lb 3 

C U T T I N G 

959


Pocket Wire Rope and Cable Cutter 

■■Top-quality, pocket-size cutter 


■■Excellent cutter for 3/16" hard wire rope or cablee 

■■1/4" soft wire rope or cable, piano wire, or aircraft cable 


or cable! 

Cat. No. UPC No. Packaging Length Cable Capacity Rod Capacity Product Weight Shelf Pack Qty. 

0690TN 037103911315 Carded 7-1/2 in 3/16 in, 5 mm 3/32 in, 2.4 mm 0.80 lb 10 

Wire Cutter 

■■Center cut blades 

■■Cuts mild steel (Brinel 140) (80,000 PSI) to 5/32" diameter 

■■Cuts hard steel (HRC 44) (208,000 PSI) to 3/32" diameter 


or cable! 

Cat. No. UPC No. Packaging Length Medium Steel Dia. Hard Steel Dia. Product Weight Shelf Pack Qty. 

PWC9 037103925756 Boxed 8-1/2 in 5/32 in, 4 mm 3/32 in, 2.4 mm 0.72 lb 5 


Nut Splitter 

■■Removes rusted or frozen nuts 

■■Center-cut blades 

■■Blades swivel 360° for ease in splitting hard to reach nuts 

■■Black-oxide, rust-resistant finish 

■■Plastisol-coated handle 

■■Place blades across nut at 90° angles 

■■Turn power screw with impact or hand wrench to split nuts 

■■Doesn't injure bolt or thread, splits both sides of nut at once 

■■Replacement adjusting screw with ball: 1338P 


or cable! 

Cat. No. UPC No. Packaging Length Replacement Blade Cat No. Capacity Product Weight 

1390PQ 037103913166 Boxed 11-3/4 in 1317PQ (1 each) Cuts nuts up to 3/4 in (19mm) accross flats 3.21 lb 

Steel Strap Cutter, 3/4" 

■■Sheer-cut blades give clean, smooth, easy cuts 

■■Lower jaw slides under the tightest strapping or staple 

■■Workhead has black oxide, rust-resistant finish 

■■Cuts steel strap up to 3/4" wide 

■■Spring action handles open jaws automatically before and after 

each cut 

■■Plastisol ® grips 

■■HKP's most popular strap cutter model 


or cable! 

Cat. No. UPC No. Packaging Length Flat Steel Strap Round Steel Tie Wire Product Weight 

0990T 037103912053 Boxed 9 in 3/4 in x 0.035 in, 19 mm x 1 mm 0.080 in, 2 mm 1.25 lb 

960


Steel Strap Cutter, 1-1/4" 

■■Sheer-cut blades 

■■Workhead has black oxide, rust-resistant finish 

■■1-handed operation gives extra leverage for continuous cuts 

■■Cuts wide steel strap, quickly and cleanly 

■■Cushion grip handles 


or cable! 

Cat. No. UPC No. Packaging Length Flat Steel Strap Product Weight 

1290G 037103912718 Boxed 12 in 1-1/4 in x 0.050 in, 32 mm x 1 mm 1.70 lb 

Heavy Duty, Steel Strap Cutter, 2" 

■■Sheer-cut blades 

■■Cuts heavy steel strapping up to 2" 

■■Excellent for pallets, loading and unloading freight cars, 

trucks, ships 

■■Long-handled, goose neck, 2-hand operated cutter 

■■Keep hands away from cutting area 


or cable! 

Cat. No. UPC No. Packaging Length Flat Steel Strap Product Weight 

2690GP 037103916242 Boxed 24 in 2 in x 0.050 in, 51 mm x 1 mm 6.80 lb 

Handklip Cutter 

■■Parrot-beak jaw with center-cut blades, to grasp wire 

and staples 

■■Cuts wire, cable, and light chain, up to 3/16" diameter 

■■Soft and med. hard metals up to 1/4" diameter, and medium 

hard chain lin 


Rockwell C31 


■■1-handed operation 

■■Toolbox and pocket size 


or cable! 

Cat. No. UPC No. Packaging Length Soft and Medium Hard Materials Product Weight 

0690C 037103911261 Boxed 9 in 3/16 in, 5 mm 0.80 lb 

10 

C U T T I N G 

961


Slotted Angle Iron Shear 

■■Used to make braces, shelves, and tables 

■■Lightweight, portable shear 


■■Cuts pre-drilled and slotted angles up to 45° on either leg 


or cable! 

Cat. No. UPC No. Packaging Length Capacity Replacement Blades Lower Cat No. 

Replacement Blades Upper 

Cat No. 


2790HKP 037103916556 Boxed 38 in 3 in x 1 1/2 in x 1/8 in 2710HK 2711HK 17.70 lb 


Ratchet-type One Hand Operated Soft Cable Cutter 

■■Compact size cutter 

■■Ratchet-type jaws with shear-cut blades 

■■Cuts copper and aluminum cleanly, leaves no burrs 

or sharp edges 

■■Quick release allows discontinuation of cutting 

■■Stop operation without completing the full cutting cycle 

■■1-hand operation allows cutting in confined spaces 

■■Patented ratchet design 

■■Fits in toolbox or on toolbelt 


or cable! 


Frequent Use 

Copper 

Frequent Use 

Aluminum 

Maximum 

Capacity Copper 

Maximum Capacity 

Aluminum 


3590FS 037103001474 Carded 9 in 500 MCM 600 MCM 600 MCM 750 MCM 1.40 lb 

5090FS 037103001481 Carded 10-1/2 in 600 MCM 1000 MCM 750 MCM 1000 MCM 2.86 lb 

Compact Ratcheting Cable Cutter 

■■Compact, lightweight cutter, for confined spaces 

■■Ratchet-type jaws with shear-cut blades 

■■Blades grip and hold while moderate pumping action cuts cable 

■■Both blades cut and Leaves no burrs or sharp edges 

■■Fiberglass handles with non-slip, plastic grips 

■■Cutter has self-lubricating ratchet and only 6 moving parts 

■■Note 1: MCM capacity does not include cable insulation 

■■Note 2: MCM capacity equates to conductor size only 

■■Repair Kit: 6912FHA 


or cable! 

Cat. No. UPC No. Packaging Length Communication Cable Copper Cable Aluminum Cable Single Core ACSR Three Core ACSR 

6990FHL 037103134394 Boxed 19 in - - - 653 MCM 336 MCM 4.50 lb 

6990FS 037103922526 Boxed 14 in 1-3/16 in, 30 mm 500 MCM 795 MCM - - 4.15 lb 

6990FSL 037103925787 Boxed 19 in 1-3/16 in, 30 mm 750 MCM 795 MCM - - 4.50 lb 

Product 

Weight 

962


Ratchet Type, Soft Cable Cutter 

■■Jaw keeper prevents jaws from spreading while under 

heavy load 

■■Cuts copper and aluminum communications power cable 

up to 2" 

■■Improved heavy duty jaw design 

■■Built for tough conditions 

■■Ratchet provides up to 5x's the mechanical advantage over 

manual cutters 

■■Cuts all types of copper and aluminum cables up to 2500MCM 


or cable! 


Copper and Aluminum 

Cable, All Types 

Replacement 

Cutterhead/Jaws Cat. 

No. 


8690FSK 037103060105 Boxed 27-1/2 in 2 in, 51 mm 8613FSK 12.60 lb 

Ratchet Type, Soft Cable Cutter 

■■Shear-cut blades give fast, smooth, shearing cuts 

■■Cuts copper, aluminum 

■■Cuts rubber covered or lead covered power and communications 

cable to 3" 

■■Ratchet and chain apply increased cutting pressure 

■■Gives increased mechanical advantage over manual cutters 


or cable! 

Cat. No. UPC No. Packaging Length Copper and Aluminum Cable, Power/Comm. Cable Replacement Cutterhead/Jaws Cat. No. Product Weight 

8690CS 037103095411 Boxed 29-3/4 in 3 in, 73 mm 8613CS 12.60 lb 

10 

Ratchet-Type, Hard Cable Cutter 

■■Jaw keeper prevents jaws from spreading while under 

heavy load 


■■Ratchet and chain increase cutting pressure as handles open 

and close 

■■Cuts hard cable, ACSR, ACAR, ZEBRA, and self-supporting 

telephone cable 

■■Moderate pressure needed to open and close handles 

■■Can be used effectively with short strokes in confined spaces 

■■Increased mechanical advantage over manual cutters 

■■Not recommended for cutting insulated copper 

or aluminum cable 


or cable! 

C U T T I N G 

Cat. No. UPC No. Packaging Length ACSR, ACAR, ZEBRA, and Telephone Cable (Self Supporting) 


Cat. No. 


8690FH 037103923509 Boxed 29-1/4 in 1-3/16 in, 30 mm 8613FH 12.40 lb 

963


Ratchet Type, Guy Strand Cutter 

■■Notched shear-cut blades hold material firmly in place 

■■Ratchet and chain produce easy, progressive cuts 

■■Cuts EHS guy strand, mild steel rods and bolts, and 

similar materials 

■■Makes clean, square cuts with minimal distortion 



or cable! 

Cat. No. UPC No. Packaging Length EHS Guy Strand Common Guy Strand Replacement Cutterhead/Jaws Cat. No. Product Weight 

8690CK 037103923493 Boxed 28 in 1/2 in, 13 mm 1/2 in, 13 mm 8613CK 10.34 lb 

Ratchet Type, Wire Rope Cutter 

■■Ratchet-type jaws with notched shear-cut blades 

■■Blades hold and lock material in place 

■■Cuts aircraft cable, EHS guy strand, wire rope and stainless steel 

cable 


■■Cuts all strands with minimal crushing or distortion 


or cable! 

Cat. No. UPC No. Packaging Length EHS Guy Strand 

Aircraft Cable, Hard 

Stainless Steel Cable Replacement Cutterhead/Jaws Cat. No. Product Weight 

8690TN 037103923547 Boxed 36 in 5/8 in , 16 mm 5/8 in, 16 mm 8613TN 11.00 lb 


Ratchet Type, Soft Cable Cutters 

■■Jaws with shear-cut blades with special pivoting handle 

■■Handle allows cutterhead to be opened to maximum width 

■■Cuts copper and aluminum, power and communications cable 

■■Specially designed to cut conductors with large insulation 

■■Maximum handle spread of 22" for working in confined spaces 

■■Advanced cutter gives mechanical advantage of over 50 to 1 

■■For special applications contact customer service department 


or cable! 


Copper and Aluminum Cable, 

Power/Comm. Cable 


Cat. No. 


8790CS 037103923677 Boxed 3 in , 73 mm 8713CS 12.00 lb 

8790FSK 037103084736 Boxed 2 in, 51 mm 8713FSK 12.00 lb 

964


Linkmaster® Heavy Duty 

■■Linkmaster ® heavy-duty model 

■■Heat-treated, alloy steel jaws 

■■Opens and closes tire chain cross links 



■■All steel handles 

■■Makes repairs quickly and easily 


or cable! 

Cat. No. UPC No. Packaging Length Replacement Cutterhead/Jaws Cat. No. Product Weight 

0390MLN 037103909404 Boxed 30 in 0313LKN 8.00 lb 

Linksem® Intermediate 

■■Strong, rugged, compact, lightweight cutter 

■■Opens and closes tire chain cross links ON or OFF the tire 

■■Cushion grip handles 

■■Individually packaged with instructions 


or cable! 

Cat. No. UPC No. Packaging Length Capacity Link Diameter Product Weight 

1390L 037103913135 Boxed 13 in 5/16 in, 8 mm 1.35 lb 

Net-Link Closer for Closing Chain Links 

■■Used on commercial fishing boats and draggers for net and 

mooring chains 

■■Designed to close heavy chain link 



■■Replacement cutterhead: 0213LC 


or cable! 

Cat. No. UPC No. Packaging Length Capacity Link Diameter Replacement Cutterhead/Jaws Cat. No. Product Weight 

0290MLC 037103908117 Boxed 30 in 3/8 in, 10 mm 0213LC 7.80 lb 

10 

C U T T I N G 

965

H Y D R A U L I C C U T T E R S Y S T E M S 

Power Tool Workheads 

A workhead, sold as a unit, consists of the cutterhead, cylinder and control handle. Cutterheads and control handles are also available separately. In addition, the cutterhead 

and cylinder are sold as a unit for use with an HKP hand pump or air/hydraulic pump. And, in most cases, the cutterhead, cylinder, connecting hose and hand pump are also 

sold as a complete unit. 

WORKHEAD 

(For use with any HKP motor-driven 

hydraulic pump.) CUTTERHEAD, 

CYLINDER AND CONTROL HANDLE. 

Purchase as unit. 

HAND-OPERATED HYDRAULIC 

CUTTER SYSTEM 

HAND PUMP, HOSE, CYLINDER AND 

CUTTERHEAD. 

Purchase as unit. 

AUTOMATIC SYSTEM 

PORTABLE POWER PACK 

(electric/hydraulic pump), HOSE WITH 

CONTROL CABLE, AND WORKHEAD. 

Purchase components separately. 

CUTTERHEAD 

Pneumatic Tools 

• All HKP air-powered tools require ram lateral input supply of 80-120 psi (6-8 kg/cm 2 ) 

• 9190 Series: 6.9 CFM or 8 CFM with factor of safety 

• 9290 Series: 16.2 CFM or 18.7 CFM with factor of safety 


Power Tool Selector Chart 

BY RODS AND BARS 

Type and size of material to be cut - Maximum Capacity 

Cutter Head 

Assembly 

Cat. No. 

Steel Low Carbon 

to 90,000 lb 

(40,824 kg) Tensile 

Rockwell 15 

Steel High Carbon 

to 130,000 lb 


Rockwell 30 

Steel High Alloy to 

180,000 lb (81,648 kg) 

Tensile Rockwell 40 

Reinforcing Bars to 

75,000 lb (34,020 kg) 

Tensile to Grade 75 

Stainless Steel 

to 180,000 lb 

(81,648 kg) Tensile to 

Rockwell 40 

Chain High Alloy 

to 180,000 lb 


to Rockwell 40 

Aluminum / Brass 

/ Copper, Rod 

/ Bar 

inch mm inch mm inch mm inch mm inch mm inch mm inch mm 

W75000 3/4 19 3/4 19 5/8 16 5/8 16 5/8 16 5/8 16 3/4 19 

W11800 1-1/8 29 1-1/8 29 1 25 1 25 1 25 1 25 1-1/8 29 

W1770A 9/16 14 1/2 13 Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 

W1770CD 5/8 16 9/16 14 1/2 13 1/2 13 1/2 13 1/2 13 Do Not Cut 

W1770TC Do Not Cut Do Not Cut 1/2 13 1/2 13 1/2 13 7/16 11 Do Not Cut 

9190C 3/8 10 3/8 10 5/16 8 5/16 8 5/16 8 5/16 8 3/8 10 

9190NE 3/8 10 3/8 10 5/16 8 Do Not Cut Do Not Cut Do Not Cut 3/8 10 

9190A 3/8 10 3/8 10 Do Not Cut Do Not Cut Do Not Cut Do Not Cut 3/8 10 

9190C 1/2 13 1/2 13 3/8 10 3/8 10 3/8 10 3/8 10 1/2 13 

9290NE 1/2 13 1/2 13 3/8 10 Do Not Cut Do Not Cut Do Not Cut 1/2 13 

966


BY CABLE 

Type and size of material to be cut - Maximum Capacity 

Cutter Head 

Assembly 

Cat. No. 

Copper Power 

Cable 

Communication Cable 

(not self-support) 

ACSR and ACAR 

Cable 

Common Guy 

Strand Cable 

Aluminum Power 

Cable 

EHS Guy Strand 

Cable 

Wire Rope, Hard 

Including Stainless 

inch mm inch mm inch mm inch mm inch mm inch mm inch mm 

W177089 3 76 3-1/2 89 Do Not Cut Do Not Cut 3 76 Do Not Cut Do Not Cut 

W1770TN 3/4 19 Do Not Cut 3/4 19 Do Not Cut 3/4 19 3/8 10 3/4 19 

WTC400C 4 102 4 102 Do Not Cut Do Not Cut 4 102 Do Not Cut Do Not Cut 

WRC125 Do Not Cut Do Not Cut Do Not Cut 1 25 Do Not Cut 3/4 19 1-1/4 32 

WRC200 Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 2 51 

HRC300 Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 3 76 

27842 7/8 22 7/8 22 Do Not Cut Do Not Cut 7/8 22 Do Not Cut Do Not Cut 

Pump Selection 

Cat. No. Material 

HKHO2 

Hand Pump 

HKA01 

Air / Hydraulic 

HKE0501A 

1/2 HP 

HKE075 Series 

3/4 HP 

HKI150 Series 

1-1/2 HP 

HKE500 Series 

5 HP 

WTC400C 4" Power Cable 50 Sec. 10 Sec. 15 Sec. 9 Sec. 5 Sec. 2-3 Sec. 

WTC400C 4" Comm. Cable 45 Sec. 10 Sec. 10 Sec. 9 Sec. 5 Sec. 2-3 Sec. 

WTC400C 4" Aluminum 40 Sec. 10 Sec. 10 Sec. 9 Sec. 5 Sec. 2-3 Sec. 

WRC125 1" Common Guy 35 Sec. 15 Sec. 15 Sec. 8 Sec. 4 Sec. 2-3 Sec. 

WRC125 3/4" EHS Guy 65 Sec. 10 Sec. 10 Sec. 9 Sec. 5 Sec. 2-3 Sec. 

WRC125 1-1/4" Wire Rope 35 Sec. 15 Sec. 15 Sec. 12 Sec. 5 Sec. 2-3 Sec. 

WRC200 2" Wire Rope - 45 Sec. 60 Sec. 40 Sec. 25 Sec. 2-3 Sec. 

W11800 1-1/8" Low Carbon Steel Not Recommended 25 Sec. 25 Sec. 19 Sec. 8 Sec. 

W11800 1-1/8" High Carbon Steel Not Recommended 25 Sec. 25 Sec. 19 Sec. 8 Sec. 

W11800 1" High Alloy Steel Not Recommended 30 Sec. 25 Sec. 19 Sec. 10 Sec. 

W11800 1" Stainless Steel Not Recommended 30 Sec. 25 Sec. 19 Sec. 0 Sec. 

W11800 1" Aluminum Not Recommended 30 Sec. 25 Sec. 19 Sec. 8 Sec. 

W75000 Low Carbon Steel 3/4" 90,000 Tensile 20 Sec. 10 Sec. 10 Sec. 7 Sec. 3 Sec. 

W75000 High Carbon Steel 3/4" 130,000 Tensile 40 Sec. 15 Sec. Not Recommended 3 Sec. 

W75000 5/8" High Alloy 180,000 Tensile 25 Sec. 18 Sec. 10 Sec. 7 Sec. 3 Sec. 3-4 Sec. 

W75000 5/8" Rebar 20 Sec. 15 Sec. 7 Sec. 7 Sec. 4 Sec. 2-3 Sec. 

W75000 5/8" Stainless Steel 180,000 Tensile 30 Sec. 18 Sec. 15 Sec. 9 Sec. 3 Sec. 

W75000 3/4" Aluminum Rod 30 Sec. 15 Sec. 15 Sec. 7 Sec. 3 Sec. 2-3 Sec. 

W1770A 9/16" Low Carbon 25 Sec. 10 Sec. 8 Sec. 7 Sec. 4 Sec. 2-3 Sec. 

W1770A 1/2" High Carbon 30 Sec. 12 Sec. 7 Sec. 7 Sec. 4 Sec. 2-3 Sec. 

W1770CD 5/8" Low Carbon 35 Sec. 10 Sec. 15 Sec. 7 Sec. 3 Sec. 2-3 Sec. 

W1770TC 1/2" High Alloy 37 Sec. 10 Sec. 10 Sec. 7 Sec. 4 Sec. 2-3 Sec. 

W1770TC 1/2" Rebar 35 Sec. 10 Sec. 10 Sec. 8 Sec. 5 Sec. 2-3 Sec. 

W1770TC 1/2" Stainless Steel 37 Sec. 10 Sec. 10 Sec. 7 Sec. 4 Sec. 2-3 Sec. 

W177089 3" Copper Power Cable 60 Sec. 19 Sec. 15 Sec. 10 Sec. 5 Sec. 2-3 Sec. 

W177089 3" Comm. Cable 60 Sec. 19 Sec. 15 Sec. 10 Sec. 5 Sec. 2-3 Sec. 

W177089 3" Aluminium Cable 60 Sec. 19 Sec. 15 Sec. 10 Sec. 5 Sec. 2-3 Sec. 

W1770TN 3/4" Wire Rope 35 Sec. 10 Sec. 12 Sec. 10 Sec. 5 Sec. 2-3 Sec. 

10 

C U T T I N G 

967


Ordering Replacement Parts 

Order replacement parts through your Apex Tool Group Distributor. Care should be taken to give accurate information regarding part numbers and descriptions. Include product 

model numbers and serial numbers as well. Although all parts are available at the factory, some may be available in a parts kit format only. It is recommended 

customers stock spare blades, seals, filters and oil to minimize delay in maintaining units. 

Operating Hydraulic Pumps Below - 25°F (-31°C) 

All HKP pumps are supplied with a high quality hydraulic oil. Pour point -25°F (-31°C) 150/165 viscosity SSU @ 100°F (38°C). When operating below -25°F, contact Apex 

Tool Group Customer Service for oil recommendation. Before initial operation, please inspect product to identify any potential damage, or oil leakage, caused during shipment. 

Factory Repair Service 

HKP units may be returned to factory for repair and reconditioning at any time. A free inspection and estimate of repair charges will be supplied if requested. All returns 

must be made by prepaid transportation and contact information such as name, address and daytime phone number supplied. Failure to supply this information may result 

in product repair delay. 

Any Enerpac branded pumps should be returned to an authorized Enerpac service center for repair and reconditioning, go to www.enerpac.com to find your closest authorized 

service center. 

Installation Recommendations 

IMPORTANT: Electrical connections on cutterhead and hydraulic hose are for low voltage control only. DO NOT PLUG CONTROL HANDLE INTO MAIN POWER SUPPLY. 

The switches and wiring are designed for relay control only. 

HKE075 series single phase Power Pack units are factory wired to run in counterclockwise direction and can be plugged into any outlet with proper power supply. 

Three phase units must be wired into customer’s system. Be sure to wire so unit runs counterclockwise. 


HKE1502A and HKE500 series Hydraulic Power Sources are supplied in three phase only and can be wired to operate in either direction. Try to install units so that hoses 

and wiring are not accessible to damage by fork lifts or other handling equipment. 

When installing pumping unit overhead, be sure to have both cutterhead and hoses well below the pump. Do not loop hoses overhead as air pockets will result in slow 

reaction. Speed of cut should be approximately that indicated on the POWER TOOL SELECTOR CHART. If unit is cutting slower than indicated, DO NOT ADJUST RELIEF VALVE. 

THE PRESSURE SETTING WILL NOT AFFECT THE SPEED. 

We recommend checking all connections for leaks, check for voltage drop or contact Customer Service for assistance. 

Power Tool Hoses & Accessories 

• All HKP hydraulic hoses are made from oil-and abrasion-resistant materials 

• Hose style also offered in 1/4” or 3/8” sizes 

• Hoses are 2-ply rated, reinforced with two braids of high tensile steel wire and covered with oil and weather resistant rubber 

• MSHA approved, 2-wire steel braid with 3/8” (10mm) – 18 NPTF fittings 

• Only order enough hose to fit your particular application. Using too much hose, slows operator and production 

• All control wire hoses come complete with 3-wire, twist-lock connectors for low-voltage control only 

• Couplings not included with hoses 

968


Hydraulic Rod and Bar Cutter System 

■■Excellent for semi-production cutting 

■■Lightweight cutter 


■■Cuts No. 4 rebar, soft, medium, and hard materials 

to 1/2" (13 mm) 

■■Maximum hardness of material to be cut: Brinell 

455/Rockwell C48 


Cat. No. UPC No. Packaging Replacement Jaws/Heads/Blades Cat No. Product Weight 

1790CDX 037103914835 Boxed 1713CDX 37.00 lb 


1713CDX Cutterhead BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 

1752HK Cylinder Assembly HKH02 Two Speed Hand Hydraulic Pump 

Hydraulic Wire Rope Cutter System 

■■Makes clean, even cuts with no distortion 

■■Notched blade holds wire rope or cable securely 

■■Cuts hard or soft wire rope and cable to 3/4" (19 mm) 

■■Not recommended for copper or aluminum power cable 


or cable! 


1790TN 037103914903 Boxed 1713TN 40.60 lb 

10 


1713TN Cutterhead BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 


Hydraulic Cable Cutter System 


■■Cuts soft copper or aluminum cable and lead 

■■Also cuts rubber-covered power and communications cable 

■■Do NOT cut ACSR or steel cable to 3" (76 mm) 


or cable! 

Cat. No. UPC No. Packaging Capacity Replacement Jaws/Heads/Blades Cat No. Product Weight 

179089 037103914910 Boxed 3 in, 76 mm 8913CN 32.50 lb 

C U T T I N G 


1753 Cylinder Assembly BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 

8913CN Cutterhead HKH02 Two Speed Hand Hydraulic Pump 

969


Hydraulic Cutter with Carbide Jaw Edges System 

■■Recommended for special cutting applications 

■■Cuts material exceeding Brinell 400/Rockwell C42 

■■Carbide-tipped blades 

■■Cuts hard-alloy and case-hardened chain and extremely hard 

material to 1/2" (13 mm) 

■■Cuts one side of link at a time 



or cable! 


1790TC 037103914880 Boxed 1713TC 43.70 lb 


1713TC Cutterhead BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 



Hydraulic Soft Nut Splitter System (48mm) 

■■Center-cut blades swivel 360° to allow cutting 

in confined spaces 

■■Cuts soft nuts, Rockwell C15 

■■Do NOT cut hard nuts 


or cable! 

Cat. No. UPC No. Packaging Capacity Replacement Jaws/Heads/Blades Cat No. Product Weight 

1790PQ 037103914859 Boxed 1 7/8 in. Across the Flats 1713PQ 47.20 lb 


1713PQ Cutterhead BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 

1753 Cylinder Assembly HKH02 Two Speed Hand Hydraulic Pump 

Hydraulic Strip Shear Cutter System 

■■Recommended for fast, production cutting of steel strapping 


■■Cuts flat steel strap 1/4" (6 mm) x 1 1/2" (38 mm) 


or cable! 


1790T 037103914866 Boxed 1713T 42.00 lb 


1713T Cutterhead HKH02 Two Speed Hand Hydraulic Pump 

BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) P1754 Cylinder Assembly 

970


Hydraulic Tire Bead Cutter System 

■■Destroys old or new substandard tires 

■■Cuts tire bead on all passenger and light truck tires 

■■Prevents reuse of tires & insures proper destruction 

of defective tires 


or cable! 


1790TA 037103914873 Boxed 1713TA 44.00 lb 


1713TA Cutterhead BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 

1753 Cylinder Assembly HKH02 Two Speed Hand Hydraulic Pump 

Hydraulic Iron Grating Cutter System 

■■Cutter can be used with any HKP power pack for quick, 

efficient cutting 

■■Special jaws fit between iron gratings 

■■Cuts iron grating to 1-1/4" thick 


or cable! 


1790TG 037103914897 Boxed 1713TG 43.00 lb 


1713TG Cutterhead BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 


10 

Tire Chain Repair System 

■■Ideal for fast truck chain maintenance by fleet operators 

■■Mounts on platform or mobile cart 

■■Opens, closes, and cuts up to 1/2" alloy chain, case-hardened 

chain, and padlock hasps 


or cable! 


WTC200A 037103106759 Boxed 1713TC for 1780TC, 1713LK for 1780LK 138.00 lb 


1780LK Hydraulic Linkmaster® Workhead 1 BU1405 Hydraulic Hose for HKH02 and HKA01 (7 ft) 2 

1780TC Hydraulic Cutter with Carbide jaw Edges Workhead Assembly 1 HKE0751B 

HKE075 Series, 3/4-HP Power Pack Only - Operation of 

Two Workheads 

1 

C U T T I N G 

971

H Y D R A U L I C C U T T E R W O R K H E A D S 

Hydraulic Rod and Bar Cutter Workhead 

■■Excellent for semi-production cutting 

■■Lightweight cutter 


■■Cuts No. 4 rebar, soft, medium, and hard materials 

to 1/2" (13mm) 


Rockwell C48 


■■Can be used with any HKP electric/hydraulic pump 


or cable! 

Cat. No. UPC No. Packaging Includes Product Weight 

1780CDX 037103914712 Boxed (B) cylinder assembly (1752), (C) cutterhead (1713CDX) only 24.20 lb 

W1770CD 037103904287 Boxed (A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead (1713CDX) only 27.00 lb 

Hydraulic Wire Rope Cutter Workhead 

■■Makes clean, even cuts with no distortion 

■■Notched blade holds wire rope or cable securely 

■■Cuts hard or soft wire rope and cableto 3/4" (19mm) 

■■Not recommended for copper or aluminum power cable 



or cable! 



1780TN 037103914774 Boxed (B) cylinder assembly (1752), (C) cutterhead (1713TN) only 15.00 lb 

W1770TN 037103904379 Boxed (A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead (1713TN) 22.30 lb 

Hydraulic, Angular Rod and Bar Cutter Workhead 

■■Makes flush cuts in confined spaces 

■■Angular jaws with clipper-cut blades 

■■Cuts soft metal to 9/16" (14mm) or medium metal to 1/2" (13mm) 


■■Angle of cutterhead keeps tool and users hands clear 

of work surface 

■■Do NOT cut hard material 



or cable! 

Cat. No. UPC No. Packaging Replacement Jaws/Heads/Blades Cat No. Includes Product Weight 

1780A 037103914699 Boxed 1713A (B) cylinder assembly (1752), (C) cutterhead (P1713A) only 18.00 lb 

W1770A 037103904263 Boxed 1713A 

(A) control handle (W10824), (B) cylinder assembly (1752), (C) 

cutterhead (P1713A) 

22.14 lb 

972


Hydraulic Cable Cutter Workhead 


■■Cuts soft copper or aluminum cable and lead to 3" (76mm) 

■■Also cuts rubber-covered power and communications cable 

■■Do NOT cut ACSR or steel cable 


■■For Soft Copper or Aluminum Cable to 3" (76mm) 


or cable! 


Replacement Jaws/Heads/ 

Blades Cat No. 

178089 037103914781 Boxed 8913CN (B) cylinder assembly (1753), (C) cutterhead (8913CN) only 22.20 lb 

W177089 037103904386 Boxed 8913CN 

Includes 

(A) control handle (W10824), (B) cylinder assembly (1753), (C) cutterhead 

(8913CN) 

Product 

Weight 

19.90 lb 

Hydraulic Cutter with Carbide Jaw Edges Workhead 

■■Recommended for special cutting applications 

■■Cuts material exceeding Brinell 400/Rockwell C42 

■■Carbide-tipped blades 

■■Cuts hard-alloy and case-hardened chain and extremely hard 

material to 1/2” (13mm) 

■■Cuts one side of link at a time 




or cable! 

10 

Cat. No. UPC No. Packaging Capacity Includes Product Weight 

1780TC 037103914750 Boxed 1/2" / 13mm (B) cylinder assembly (1752), (C) cutterhead (1713TC) only 22.50 lb 

W1770TC 037103904355 Boxed 1/2" / 13mm 

(A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead with 

guard (1713TC) 

25.70 lb 

Hydraulic Soft Nut Splitter Workhead (48mm) 

■■Center-cut blades swivel 360° to allow cutting in confined 

spaces 

■■Cuts soft nuts up to 1 7/8”, Rockwell C15 

■■Do NOT cut hard nuts 


or cable! 

C U T T I N G 


1780PQ 037103914729 Boxed (B) cylinder assembly (1753), (C) cutterhead (1713PQ) only 26.10 lb 

973


Hydraulic Strip Shear Cutter Workhead 

■■Recommended for fast, production cutting of steel strapping 


■■Cuts flat steel strap 1/4” (6mm) x 1 1/2” (38mm) 



or cable! 


1780T 037103914736 Boxed (B) cylinder assembly (P1754), (C) cutterhead (1713T) only 15.00 lb 

W1770T 037103904324 Boxed (A) control handle (W10824), (B) cylinder assembly (P1754), (C) cutterhead (1713T) 22.00 lb 

Hydraulic Tire Bead Cutter Workhead 

■■Destroys old or new substandard tires 

■■Cuts tire bead on all passenger and light truck tires 

■■Prevents reuse of tires & insures proper destruction of defective 

tires 

■■Includes W10824 control handle, 1753 cylinder assembly 

■■Includes 1713TA cutterhead 



or cable! 



1780TA 037103914743 Boxed (B) cylinder assembly (1753), (C) cutterhead (1713TA) 17.00 lb 

W1770TA 037103904331 Boxed (A) control handle (W10824), (B) cylinder assembly (1753), (C) cutterhead (1713TA) 24.00 lb 

Hydraulic Iron Grating Cutter Workhead 

■■Cutter can be used with any HKP power pack for quick, efficient 

cutting 

■■Special jaws fit between iron gratings 

■■Cuts iron grating to 1 1/4” thick 


or cable! 


1780TG 037103914767 Boxed (B) cylinder assembly (1752), (C) cutterhead (1713TG) only 15.00 lb 

W1770TG 037103904362 Boxed (A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead with guard (1713TG) 22.00 lb 

974



■■Compact, rugged, portable cutter 

■■Easily replaceable or redressable blades 

■■Cuts rods and bars 

■■1-hose operation 

■■Replacement stationary blade: 13234 

■■Replacement blamovingde: 13934 


or cable! 

Cat. No. UPC No. Packaging A B C D E Capacity Thrust Product Weight 

W11800 037103904119 Boxed 7-1/2 in 12-3/4 in 5 in 5-1/2 in 5 in 1-1/8 in, 29 mm 70000 lb 46.70 lb 

W75000 037103904447 Boxed 15 in 9-3/4 in 4-1/4 in 4-1/4 in 5 in 3/4 in, 19 mm 25000 lb 20.40 lb 

Hydraulic Rod and Bar Cutters Replacement Cutter Blades 

Cat. No. UPC No. Packaging Description Replacement Part for Product Weight 

13234 037103912886 Boxed Stationary Blade W75000 0.58 lb 

13934 037103913203 Boxed Moving Blade W75000 0.46 lb 

75000B Boxed Cutter Head & Cyclinder, No Handle W75000 17.02 lb 

13918 037103913180 Boxed Stationary Blade W11800 1.61 lb 

13908 037103913173 Boxed Moving Blade W11800 0.92 lb 

11800B 037103234964 Boxed Cutter Head & Cylinder, No Handle W11800 1.00 lb 

10 

Hydraulic Wire Rope Cutter Workhead 

■■Use for production cutting of wire rope and cable 

■■Loads through the front to allow cuts anywhere on the wire rope 

or cable 

■■Control handle not available 

■■Do NOT cut cable smaller than 1/2 in 

■■Has double-acting cylinder, uses a "B" or "C" suffix pump 

■■Thrust: 140,000 lb 


or cable! 

Cat. No. UPC No. Packaging A B C Capacity 

HRC300 037103901132 Boxed 21-1/2 in 8-1/2 in 6-5/8 in 3 in, 76 mm 

WRC125 037103903983 Boxed 11 in 5-1/4 in 3-1/4 in 1-1/4 in, 32 mm 

WRC200 037103903990 Boxed 16 in 6-1/2 in 5 in 2 in, 51 mm 


Blades Cat No. Width Thrust 

RT=39004 

LT=39014 

Mov=37378 

RT=34158 

LT=34148 

Mov=34138 

RT=35224 

LT=35204 

MOV=35168 

Product 

Weight 

6-1/2 in 140000 lb 154.00 lb 

3 in 25000 lb 26.00 lb 

4-1/2 in 70000 lb 60.00 lb 

C U T T I N G 

975


Hydraulic Soft Cable Cutter Workhead 


■■Cuts aluminum or copper power and communications cable 

■■Toggle design gives extra power for cutting large, tough cable 

■■Keeper ensures clean, shearing cuts of fine strands 


or cable! 

Cat. No. UPC No. Packaging A B C Capacity 

WTC400C 037103904041 Boxed 29 in 11 in 2-1/2 in 

4 in, 102 

mm 


Blades Cat No. Width Thrust 

Product 

Weight 

1713CN 2-1/2 in 22000 lb 27.00 lb 


■■Positioning cam keeps stock square to jaws 

■■Gives flush, square cuts instead of conventional, chisel-type cuts 


■■Cuts soft and medium material 


or cable! 


Cat. No. UPC No. Packaging A B C D E Capacity 

W118SQ 037103904102 Boxed 17-1/2 in 12-3/4 in 5 in 5-1/2 in 5 in 

7/8 in, 

22 mm 

Replacement Jaws/Heads/Blades Cat 

No. 

Width 

Product 

Weight 

Stationary 22178 / Moving 22168 5-7/8 in 42.00 lb 

Hydraulic Rod, Bar and Wire Straightener Workhead 

■■Straightens coiled steel 

■■Straightens the leading 4' to 5' of coiled steel 

■■Material ready to insert into drawing or cold-heading machine 

■■Includes W10904 control handle 

■■Anvils available for 7/8" square stock 


or cable! 

Cat. No. UPC No. Packaging A B Capacity Replacement Jaws/Heads/Blades Cat No. Thrust Product Weight 

W106920 037103904072 Boxed 14-1/2 in 8 in 

9/16 in to 1-1/4 in, 

14 mm to 32 mm 

2 Stationary 10568 / Moving 10558 25000 lb 25.10 lb 

976


Hydraulic Pipe Cutter Workhead 

■■Nuclear reactor maintenance tool 

■■Cuts Schedule 40 pipe, including stainless steel 

■■Double-acting cylinder requires 2-outlet B or C suffix pump 


or cable! 

Cat. No. UPC No. Packaging A B Capacity Replacement Jaws/Heads/Blades Cat No. Thrust Product Weight 

37071 037103919601 Boxed 22 in 9 in 

2.00 in, 51 

mm 

Stationary 41238/Moving 41228 70000 lb 83.00 lb 

Hydraulic Tire Bead Cutter Workhead 

■■Rugged, heavy-duty, dependable tire bead cutter 

■■Cuts bead on substandard, new or used tires 

■■Cuts ACSR as an Open Throat cutter 


or cable! 

■■45601DH is made to Order Contact Customer Service 

for Availability 

■■45601DH is made from 45601 Workhead and W25232 Dual 

Control Handle 

10 

Cat. No. UPC No. Packaging A B C Capacity Thrust Product Weight 

45601 037103921215 Boxed 20 in 12-1/2 in 4 in 

2.00 in X 2-3/4 in, 

51 mm X 70 mm 

30000 lb 34.00 lb 

45601DH 037103144133 Boxed - - - - - - 

C U T T I N G 

977

H Y D R A U L I C P U M P S 

Hydraulic Pump Nomenclature 

HK E 050 1 A 

TYPE 

PUMP HP 

VOLTAGE 

VALVE OPTIONS 

H - Hard 

A - Air over hydraulic 

E - Electric 

050 - 1/2 HP 

075 - 3/4 HP 

150 - 1-1/2 HP 

500 - 5 HP 

1 - 115 V 

2 - 230 V 

4 - 460V 

A - Single outlet, remote control 

B - Double outlet, manual control 

C - Double outlet, remote control 

Hydraulic Pumps, Manual Hand 

■■Two speed operation reduces handle strokes by 78% 

in some cases 

■■Durable glass filled nylon reservoir resists corrosion 

■■Internal pressure relief valves to protect hydraulic systems 

■■Non-conductive fiberglass handle locks for easy carrying 

■■Reduced handle effort 

■■Pressure levels set for safe use with all H.K. Porter® 

cutting tools 


or cable! 

Cat. No. UPC No. Packaging Type Product Weight 

HKH02 037103122537 Boxed Manual Hand Pump 9.80 lb 


Hydraulic Pumps, Air Hydraulic 

■■Portable, lightweight 

■■Horizontal or vertical operation 

■■Powers all single action HKP workheads 

■■Operates on maximum 150 PSI line pressure 

■■Air & hydraulic inlet filters reduce potential damage 

from contamination 

■■Reduced noise 

■■Pressure levels set for safe use with all H.K. Porter® cutting 

tools 

■■Cutterhead assemblies must be ordered separately 

■■Valve function: Advance-Hold-Retract 


or cable! 

Cat. No. UPC No. Packaging Type Product Weight 

HKA01 037103122544 Boxed Air/Hydraulic 15.75 lb 

978

H Y D R A U L I C P U M P S 

Hydraulic Pumps 

■■Lightweight design, rugged construction 

■■2-stage pump delivers low pressure for rapid advance of piston 

■■Pump shifts to high pressure under load. Large, 

1 gallon reservoir 

■■Internal relief valve protects system components from overload 

■■Internal filter protects system from contamination of hydraulic oil 

■■Control option A: Push-button control handle attached 

to workhead W10824 

■■Control option B: Heavy-duty foot switch W32368 

■■Control option C: Hand-held, control switch W36048 


or cable! 

Cat. No. UPC No. Packaging Horsepower Voltage/Phase/Hertz Product Weight 

HE4405A 037103901019 Boxed 1-1/2 HP 230 V 3 PH 60 Hz 115.00 lb 

HKE0501A 037103238238 Boxed 1/2 HP 115 V 1 PH 60 Hz 35.00 lb 

HKE0751A 037103238245 Boxed 3/4 HP 115 V 1 PH 60 Hz 135.00 lb 

HKE0751B 037103238252 Boxed 3/4 HP 115 V 1 PH 60 Hz 135.00 lb 

HKE0751C 037103238269 Boxed 3/4 HP 115 V 1 PH 60 Hz 135.00 lb 

HKE1501A 037103238276 Boxed 1-1/2 HP 115 V 1 PH 60 Hz 137.00 lb 

HKE1501C 037103240903 Boxed 1-1/2 HP 115 V 1 PH 60 Hz 137.00 lb 

HKE1502A 037103238283 Boxed 1-1/2 HP 230 V 3 PH 60 Hz 137.00 lb 

HKE5002A 037103238290 Boxed 5 HP 230 V 3 PH 60 Hz 215.00 lb 

HKE5002C 037103238306 Boxed 5 HP 230 V 3 PH 60 Hz 215.00 lb 

HKE5004A 037103238313 Boxed 5 HP 460 V 3 PH 60 Hz 215.00 lb 

HKE5004C 037103238320 Boxed 5 HP 460 V 3 PH 60 Hz 215.00 lb 

10 

Hydraulic Hose and Control Wire 

■■Use hose and control wire for remote control 

■■3-wire, twist-lock connectors 

■■Low voltage control, only 

■■Couplings not included (BU1606, BU1604, BU1605) 

■■Excess hose will slow operation, lack of hose will limit mobility 

■■Features hose guard to prevent kinking 

■■Hose ID is 3/8" 

■■Special hoses available on request 


or cable! 

Cat. No. UPC No. Packaging Hose Length Hose Inside Diameter Product Weight Shelf Pack Qty. 

W119581 037103904133 Boxed 20 ft, 6.1 m 3/8 in, 10 mm 10.46 lb 1 

W119587 037103904195 Boxed 50 ft, 15.2 m 3/8 in, 10 mm 23.00 lb 1 

W119681 037103904201 Boxed 10 ft, 3 m 3/8 in, 10 mm 7.00 lb 1 

C U T T I N G 

979

H Y D R A U L I C A C C E S S E S O R I E S 

Hydraulic Hose for HKH02 and HKA01 

■■Couplings not included 

■■Excess hose will slow operation, lack of hose will limit mobility 

■■Order hose to fit specific applications 

■■Features hose guard to prevent kinking 

■■Special hoses available on request 

■■Hose ID is 3/8" 

■■To be used with HKH02 or HKA01 pumps 

Cat. No. UPC No. Hose Length Hose Inside Diameter Product Weight Shelf Pack Qty. 

BU1405 037103900722 7 ft, 2 m 3/8 in, 10 mm 4.40 lb 1 

Hydraulic Hose Couplers 

■■Quick detach couplers 

■■Use with hand-hydraulic pump (HKH02) or air/hydraulic pump 

(HKA01) 

■■3/8" - 18 NPTF 

■■Shortens workhead switching time 


or cable! 


BU1604 037103900753 Boxed 0.51 lb 1 

BU1605 037103900760 Boxed 0.30 lb 1 

BU1606 037103900777 Boxed 0.21 lb 1 


Hydraulic Hose Couplers Swivel Disconnect 

■■Heavy-duty, swivel disconnect couplers 

■■Use with all HKP workheads 

■■Designed for comfortable, efficient positioning of workheads 

■■3/8" - 18 NPTF 


20868 037103915085 Boxed 0.72 lb 1 

23628 037103915658 Boxed 0.23 lb 1 

23638 037103915665 Boxed 0.49 lb 1 

Control Handle 1-Handed 

■■Standard on all units except as noted 

■■1-handed control with guard and fingertip button 

Cat. No. UPC No. Packaging A B C Product Weight 

W10824 037103904089 Boxed 5-3/4 in 7 in 1-1/2 in 3.00 lb 

980

H Y D R A U L I C A C C E S S O R I E S 

Control Handles 2-Handed 

■ ■“Parallel” or “in-line” design 

■■2-handed control 

■■Requires operator to push 2 control buttons 

to operate workhead 

■■Keeps hands out of cutting area 


or cable! 

Cat. No. UPC No. Packaging A B C Product Weight 

W25232 037103904393 Boxed 12-3/4 in 7 in 1-1/2 in 8.00 lb 

Optional Controls Heavy Duty Electric Foot Switch 

■■Heavy guard prevents accidental activation of workhead 

■■Includes 10' (3084mm) of control cord 


or cable! 


W32368 037103904416 Boxed 12.00 lb 

Optional Controls Electric Solenoid-Operated Air Valve 

■■For extra fast operation of air actuated tools 


or cable! 

10 


W37048 037103904430 Boxed 6.00 lb 

Optional Controls Heavy Duty Air Foot Switch 

■■For use with 9190 or 9290 series rod cutters and 27842 

cable cutter 


or cable! 

C U T T I N G 


34468 037103919106 Boxed 3 lb 

981

P N E U M A T I C C U T T E R S 

Light Duty Pneumatic Cutters 

■■Lightweight model for 80-120 psi 

■■Used in the wire-shelving industry 

■■No exhaust shock 

■■Angular jaws 

■■Cuts soft, or medium materials 

■■Light duty workhead has 4" bore (102mm) and 2" stroke (51mm) 

■■Cutting controlled by manual pressure 

■■Filter-lubricator units recommended in air supply line-long 

tool service 


or cable! 

Cat. No. UPC No. Packaging Description A B C Capacity Product Weight 

9190A 037103924452 Boxed Light duty, Angular Cut 15 in 7-1/4 in 3-1/8 in 3/8 in, 10 mm 16.35 lb 

9190C 037103924476 Boxed Light duty, Center Cut 15 in 7-1/4 in 3-1/8 in 3/8 in, 10 mm 11.00 lb 

9190CL 037103144379 Boxed Light duty, Center Cut 15 in 7-1/4 in 3-1/8 in 3/8 in, 10 mm 15.50 lb 

9190NE 037103924513 Boxed Light duty, Clipper Cut 15 in 7-1/4 in 3-1/8 in 3/8 in, 10 mm 14.80 lb 


Heavy Duty Pneumatic Cutters 

■■Heavy-duty model for 90-130 psi 

■■Used in the wire-shelving industry 

■■No exhaust shock 

■■Clipper cut jaws 

■■Cuts soft, medium, or hard materials 

■■Heavy-duty workhead has 5" bore (127mm) and 3" stroke (76mm) 

■■Cutting controlled by manual pressure 

■■Filter-lubricator units recommended in air supply line-long 

tool service 


or cable! 

Cat. No. UPC No. Packaging Description A B C Capacity Product Weight 

9290C 037103924988 Boxed Heavy Duty, Center Cut 17-1/2 in 10 in 3-3/4 in 1/2 in, 13 mm 18.25 lb 

9290NE 037103924995 Boxed Heavy Duty, Clipper Cut 17-1/2 in 10 in 3-3/4 in 1/2 in, 13 mm 24.70 lb 

Cable Cutter 

■■Extremely fast cutter 

■■Cuts copper or aluminum cable 

■■Operates on 80-100 psi (6-7 kg/cm2) 

■■Control valve: 34468, air/foot switch 

■■Control valve: W37048, solenoid-operated (electric) foot switch 

■■Specify control valve when ordering 


or cable! 

Cat. No. UPC No. Packaging A B C Capacity Product Weight 

27842 037103916501 Boxed 6-3/4 in 8 in 13 in 7/8 in, 23 mm 27.00 lb 

982

R A T C H E T I N G T A P S A N D D I E S 

■■Die adapter works on round and hex shaped dies 

■■5 degree ratcheting arc with reversible lever eliminates hand over 

hand turning 

■■Patented Twist Lock Guide System reduces "back walk" of die 

guard 

■■Die adapter works with Pass-Thru® Ratchet and Socket System 

as well as Vortex socket accessories 

■■Autolocking feature allows for safe removal of tap adapter 

■■Spring-loaded cap allows for quick-release of large tap adapter 

■■Extension adapters provide access in tight confined areas 

114 Pc. SAE/Metric Large Ratcheting Tap and Die 

Drive Tool Set 


82812 099575828126 Case 18.25 lb 1 


82800 Large Ratcheting Sliding "T" Wrench - Tap 3/8 - 16 NC plug - Tap 14 x 1.25 plug - Hex Die 5/8 - 11 NC plug 

82801 Large Locking Tap Adapter - Tap 3/8 - 24 NF plug - Tap 14 x 2.00 plug - Hex Die 5/8 - 18 NF plug 

82802D Hex Die Adapter - Tap 7/16 - 14 NC plug - Tap 16 x 1.50 plug - Hex Die 3/4 - 10 NC plug 

3881 Medium Ratcheting Sliding "T" Wrench - Tap 7/16 - 20 NF plug - Tap 16 x 2.00 plug - Hex Die 3/4 - 16 NF plug 

3883 Medium Tap Adapter - Tap 1/2 - 13 NC plug - Tap 18 x 1.50 plug - Hex Die 3 x 0.50 taper 

3882 Small Tap Adapter - Tap 1/2 - 20 NF plug - Tap 18 x 2.50 plug - Hex Die 3 x 0.60 taper 

3884D Medium Hex Die Adapter - Tap 9/16 - 12 NC plug - Hex Die 4 - 40 taper - Hex Die 4 x 0.70 taper 

82803D Male Extension Adapter - 3/8" Drive - Tap 9/16 - 18 NF plug - Hex Die 6 - 32 taper - Hex Die 4 x 0.75 taper 

82804 Female Extension Adapter - 3/8" Drive - Tap 5/8 - 11 NC plug - Hex Die 8 - 32 taper - Hex Die 5 x 0.80 taper 

- Sliding "T" for Adapters - Tap 5/8 - 18 NF plug - Hex Die 10 - 24 taper - Hex Die 5 x 0.90 taper 

- 4mm Hex Key - Tap 3/4 - 10 NC plug - Hex Die 10 - 32 taper - Hex Die 6 x 1.00 taper 

- 5 Screw Extractors - Tap 3/4 - 16 NF plug - Hex Die 12 - 24 taper - Hex Die 7 x 1.00 taper 

- Metric Thread Gauge - Tap 3 x 0.50 taper - Hex Die 1/8 - 27 NPT - Hex Die 8 x 1.25 plug 

- SAE Thread Gauge - Tap 3 x 0.60 taper - Hex Die 1/8 - 28 BSP - Hex Die 9 x 1.00 plug 

- Tap 4 - 40 taper - Tap 4 x 0.70 taper - Hex Die 1/4 - 18 NPT - Hex Die 9 x 1.25 plug 

- Tap 6 - 32 taper - Tap 4 x 0.75 taper - Hex Die 1/4 - 19 BSP - Hex Die 10 x 1.25 plug 

- Tap 8 - 32 taper - Tap 5 x 0.80 taper - Hex Die 1/4 - 20 NC taper - Hex Die 10 x 1.50 plug 

- Tap 10 - 24 taper - Tap 5 x 0.90 taper - Hex Die 1/4 - 28 NF taper - Hex Die 11 x 1.50 plug 

- Tap 10 - 32 taper - Tap 6 x 0.100 taper - Hex Die 5/16 - 18 NC taper - Hex Die 12 x 1.50 plug 

- Tap 12 - 24 taper - Tap 7 x 1.00 taper - Hex Die 5/16 - 24 NF taper - Hex Die 12 x 1.75 plug 

- Tap 1/8 - 27 NTP - Tap 8 x 1.25 plug - Hex Die 3/8 - 16 NC plug - Hex Die 14 x 1.25 plug 

- Tap 1/8 - 28 BSP - Tap 9 x 1.00 plug - Hex Die 3/8 - 24 NF plug - Hex Die 14 x 2.00 plug 

- Tap 1/4 - 18 NPT - Tap 9 x 1.25 plug - Hex Die 7/16 - 14 NC plug - Hex Die 16 x 1.50 plug 

- Tap 1/4 - 19 BSP - Tap 10 x 1.25 plug - Hex Die 7/16 - 20 NF plug - Hex Die 16 x 2.00 plug 

- Tap 1/4 - 20 NC taper - Tap 10 x 1.50 plug - Hex Die 1/2 - 13 NC plug - Hex Die 18 x 1.50 plug 

- Tap 1/4 - 28 NF taper - Tap 11 x 1.50 plug - Hex Die 1/2 - 20 NF plug - Hex Die 18 x 2.50 plug 

- Tap 5/16 - 18 NC taper - Tap 12 x 1.50 plug - Hex Die 9/16 - 12 NC plug 

- Tap 5/16 - 24 NF plug - Tap 12 x 1.75 plug - Hex Die 9/16 - 18 NF plug 

10 

C U T T I N G 

983




hand turning 


guard 






75 Pc. SAE/Metric Medium Ratcheting Tap and 

Die Drive Tool Set 


3887 082171388736 Case 7.22 lb 1 



3881 Medium Ratcheting Sliding "T" Wrench - Tap 1/4 - 28 NF taper - Tap 5 x 0.80 taper - Hex Die 6 - 32 taper 

3882 Small Tap Adapter - Tap 5/16 - 18 NC taper - Tap 5 x 0.90 taper - Hex Die 8 - 32 taper 

3883 Medium Tap Adapter - Tap 5/16 - 24 NF plug - Tap 6 x 0.100 taper - Hex Die 10 - 24 taper 

3884D Medium Hex Die Adapter - Tap 3/8 - 16 NC plug - Tap 7 x 1.00 taper - Hex Die 10 - 32 taper 

- Sliding "T" for Adapters - Tap 3/8 - 24 NF plug - Tap 8 x 1.25 plug - Hex Die 12 - 24 taper 

- SAE screw pitch gauge - Tap 7/16 - 14 NC plug - Tap 9 x 1.00 plug - Hex Die 1/4 - 20 NC taper 

- METRIC screw pitch gauge - Tap 7/16 - 20 NF plug - Tap 9 x 1.25 plug - Hex Die 1/4 - 28 NF taper 

- #5 screwdriver - Tap 1/2 - 13 NC plug - Tap 10 x 1.25 plug - Hex Die 5/16 - 18 NC taper 

- Tap 4 - 40 taper - Tap 1/2 - 20 NF plug - Tap 10 x 1.50 plug - Hex Die 5/16 - 24 NF taper 

- Tap 6 - 32 taper - Tap 9/16 - 12 NC plug - Tap 11 x 1.50 plug - Hex Die 3/8 - 16 NC plug 

- Tap 8 - 32 taper - Tap 9/16 - 18 NF plug - Tap 12 x 1.50 plug - Hex Die 3/8 - 24 NF plug 


- Tap 10 - 32 taper - Tap 5/8 - 18 NF plug - Tap 14 x 1.25 plug - Hex Die 7/16 - 20 NF plug 


- Tap 1/8 - 27 NTP - Tap 3/4 - 16 NF plug - Tap 16 x 1.50 plug - Hex Die 1/2 - 20 NF plug 

- Tap 1/8 - 28 BSP - Tap 3 x 0.50 taper - Tap 16 x 2.00 plug - Hex Die 9/16 - 12 NC plug 

- Tap 1/4 - 18 NPT - Tap 3 x 0.60 taper - Tap 18 x 1.50 plug - Hex Die 9/16 - 18 NF plug 

- Tap 1/4 - 19 BSP - Tap 4 x 0.70 taper - Tap 18 x 2.50 plug - Hex Die 5/8 - 11 NC plug 

- Tap 1/4 - 20 NC taper - Tap 4 x 0.75 taper - Hex Die 4 - 40 taper - Hex Die 5/8 - 18 NF plug 

984




hand turning 


guard 






40 Pc. SAE Medium Ratcheting Tap and Die Drive 

Tool Set 


3885 082171388514 Case 4.55 lb 1 


3881 Medium Ratcheting Sliding "T" Wrench - Tap 10 - 32 taper - Tap 1/2 - 13 NC plug - Hex Die 5/16 - 18 NC 

3882 Small Tap Adapter - Tap 12 - 24 taper - Tap 1/2 - 20 NF plug - Hex Die 5/16 - 24 NF 

3883 Medium Tap Adapter - Tap 1/8 - 27 NPT - Hex Die 4 - 40 taper - Hex Die 3/8 - 16 NC 

3884D Medium Hex Die Adapter - Tap 1/4 - 20 NC - Hex Die 6 - 32 taper - Hex Die 3/8 - 24 NF 

- Sliding "T" for Adapters - Tap 1/4 - 28 NF taper - Hex Die 8 - 32 taper - Hex Die 7/16 -14 NC 

- Thread gauge - Tap 5/16 - 18 NC taper - Hex Die 10 - 24 taper - Hex Die 7/16 - 20 NF 

- #5 screwdriver - Tap 5/16 24 NF taper - Hex Die 10 - 32 taper - Hex Die 1/2 -13 NC 

- Tap 4 - 40 taper - Tap 3/8 - 16 NC plug - Hex Die 12 - 24 taper - Hex Die 1/2 - 20 NF 

- Tap 6 - 32 taper - Tap 3/8 - 24 NF plug - Hex Die 1/8 - 27 NPT 

- Tap 8 - 32 taper - Tap 7/16 -14 NC plug - Hex Die 1/4 - 20 NC 

- Tap 10 - 24 taper - Tap 7/16 - 20 NF plug - Hex Die 1/4 - 28 NF 

10 

C U T T I N G 

985




hand turning 


guard 






40 Pc. Metric Medium Ratcheting Tap and Die 

Drive Tool Set 


3886 082171388620 Case 4.47 lb 1 



3881 Medium Ratcheting Sliding "T" Wrench - Tap 4 x 0.75 taper - Tap 11 x 1.50 plug - Hex Die 8 x 1.25 

3882 Small Tap Adapter - Tap 5 x 0.80 taper - Tap 12 x 1.50 plug - Hex Die 9 x 1.00 

3883 Medium Tap Adapter - Tap 5 x 0.90 taper - Tap 12 x 1.75 plug - Hex Die 9 x 1.25 

3884D Medium Hex Die Adapter - Tap 6 x 1.00 taper - Hex Die 3 x 0.60 - Hex Die 10 x 1.25 

- #5 screwdriver - Tap 7 x 1.00 taper - Hex Die 4 x 0.70 - Hex Die 10 x 1.50 

- Sliding "T" for Adapters - Tap 8 x 1.25 plug - Hex Die 4 x 0.75 - Hex Die 11 x 1.50 

- Thread gauge - Tap 9 x 1.00 plug - Hex Die 5 x 0.80 - Hex Die 12 x 1.50 

- Tap 3 x 0.50 taper - Tap 9 x 1.25 plug - Hex Die 5 x 0.90 - Hex Die 12 x 1.75 

- Tap 3 x 0.60 taper - Tap 10 x 1.25 plug - Hex Die 6 x 1.00 - Hex Die 1/8 - 28BSP 

- Tap 4 x 0.70 taper - Tap 10 x 1.50 plug - Hex Die 7 x 1.00 



hand turning 


guard 






5 Pc. Medium Ratcheting Tap and Die Drive 

Tool Set 


3880 082171388040 Case 2.65 lb 1 


3881 Medium Ratcheting Sliding "T" Wrench 3884D Medium Hex Die Adapter 

3882 Small Tap Adapter - Sliding "T" for Adapters 

3883 Medium Tap Adapter 

986



hand turning 

■■Patented Twist Lock Guide System reduces "Back Walk" of die 

guard 

■■3881: Works with 3882 and 3883 Tap Adapters & 3884 

Die Adapter 

■■82800: Works with 82801 Tap Adapter & 82802 Die Adapter 

Ratcheting "T" Wrench 

Cat. No. UPC No. Packaging Size Product Weight Shelf Pack Qty. 

3881 082171388156 Carded Medium 1.00 lb 1 

82800 099575828003 Carded Large 1.55 lb 1 

Tap Adapters 

■■Designed for use with the GearRatchet System 

■■3882 Tap Adapter Fits Tap Shanks with Size Ranges from 0.110" 

to 0.191" 

■■3883 Tap Adapter Fits Tap Shanks with Size Ranges from 0.219" 

to 0.280" 


3882 082171388248 Carded 0.50 lb 1 

3883 082171388361 Carded 0.50 lb 1 

■■Auto locking feature allows for safe removal of tap adapter 

■■Spring loaded cap allows for quick-release of large tap adapter 

■■Accommodates taps up to 9/16"-3/4" and 14mm-18mm 

Large Locking Tap Adapter 

10 


82801 099575828010 Carded 1.17 lb 1 

Hex Die Adapter 



■■Works on round and hex shaped dies 

■■3884D fits 1" Diameter Hex Stock and will Work with Round 

Stock as Well 

■■82802 Fits Up to 1-7/16" Diameter Hex Stock and Hex Dies Sizes 

9/16" to 3/4" 

C U T T I N G 


3884D 082171388446 Carded 0.50 lb 1 

82802D 099575828027 Carded 0.61 lb 1 

987


Extension Adapters 


82803D 099575828034 Male Extension Adapter - 3/8" Drive 0.11 lb 

82804 099575828041 Female Extension Adapter - 3/8" Drive 0.57 lb 

■■Restore External Threads by Filing 

■■Overlap Several Good Threads with File then File 

Damaged Threads 

■■Files Both Right and Left-Hand Threads 

■■Features Long-Lasting, Fast-Cutting Teeth 

External Thread Restorer Files 

Cat. No. UPC No. Packaging Description Product Weight 

2228D 082171022289 Carded Metric External Thread Restorer File, Pitch (0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm) 0.35 lb 

2229D 082171022296 Carded SAE External Thread Restorer File, Pitch (11, 12, 13, 14, 16, 18, 20, 24) 0.35 lb 

2249D 082171022494 Carded SAE External Thread Restorer File, Pitch (9, 10, 12, 16, 20, 27, 28, 32) 0.36 lb 


■■Free Frozen Bolts and Screws by Twisting the Tool in the 

Direction of the Rotation and Holding while Striking with a 

Hammer 

■■Reverse Action to Tighten Bolts 

■■Set is Standard 3/8" Square Drive and includes a 3/8" Square 

Drive Adapter for 5/16" Hex Bits 

■■Four-bit Set includes No. 2 and No. 3 Phillips Bits and 5/16" and 

9/32" Slotted Bits 

6 Pc. 3/8" Drive Impact Driver Set 


1140D 082171011405 Carded 6 Pc. 3/8" Drive Impact Driver Set 1.53 lb 1 

412402 082171412424 Bagged No. 2 Phillips Insert Bit 5/16" Dr. 0.05 lb 1 

412403 082171412400 Bagged Replacement No. 3 Phillips Insert Bit 5/16" Dr. 0.01 lb 1 

412406 082171412462 Bagged Replacement 6-8 Slotted Insert Bit 5/16" Dr. 0.01 lb 1 


988

S C R E W E X T R A C T O R S 

■■Removes Broken Studs, Set Screws, Pipe and Alemite Fittings 

■■Drill a Hole in the Screw and Place Extractor into Hole 

■■Tap Lightly with a Hammer and Turn Counterclockwise with 

a Tap Wrench to Remove the Screw 

■■Features Undercut Flutes for More Positive Grip 

5 Pc. Screw Extractor Set 


720DD 082171007200 Carded 0.30 lb 


1109D Screw Extractor (Sizes 1/4", 5/16") 1112D Screw Extractor (Sizes 1/2", 9/16") 

1110D Screw Extractor (Size 3/8") 1113DD Screw Extractor (Size 5/8") 

1111D Screw Extractor (Size 7/16") 

Screw Extractors 

■■Removes Broken Studs, Set Screws, Pipe and Alemite Fittings 

■■Drill a Hole in the Screw and Place Extractor into Hole 

■■Tap Lightly with a Hammer and Turn Counterclockwise with 

a Tap Wrench to Remove the Screw 

■■Features Undercut Flutes for More Positive Grip 


For Use on 

Screw Sizes 

For Use on Pipe 

Sizes 

Use Drill Size 

Minimum Depth 

of Drilled Hole Product Weight Shelf Pack Qty. 

1109D 082171011092 Bagged 1/4 in; 5/16 in - 1/8 in 3/8 in 0.05 lb 1 

1110D 082171011108 Bagged 3/8 in - 3/16 in 1/2 in 0.05 lb 1 

1111D 082171011115 Bagged 7/16 in 1/8 in 15/64 in 1/2 in 0.10 lb 1 

1112D 082171011122 Bagged 1/2 in; 9/16 in 1/4 in 5/16 in 1/2 in 0.17 lb 1 

1113DD 082171011139 Bagged 5/8 in 3/8 in 3/8 in 5/8 in 0.20 lb 1 

10 

■■Removes Screws, Broken Studs, Set Screws, Pipe and Alemite 

Fittings 

■■Drill a Hole in the Screw and Place Extractor Into Hole 

■■Tap Lightly With Hammer and Turn Counterclockwise With Tap 

Wrench to Remove the Screw 

■■Spiral Blades Grip Screw 

4 Pc. Spiral Screw Extractor Set 

Cat. No. UPC No. Packaging For Use on Screw Sizes Use Drill Size Product Weight Shelf Pack Qty. 

2419D 082171024191 Carded 

No. 12 to 5/16"; 

5/16" to 7/16"; 

7/16" to 9/16"; 

9/16" to 3/4"; 

7/64 in 

5/32 in 

1/4 in 

17/64 in 

0.25 lb 1 

C U T T I N G 

989


■■Splits Most Stubborn Nuts 7/16" (11mm) Through 3/4" (19mm) 

Across the Flats 

■■Works in Channels Not Accessible to Other Tools 

■■Parallel Action of Pusher Cracks Nuts Without Damaging Bolt 

Threads 

■■Chisel Rotates 360° to Line Up Parallel to Bolt 

■■Simply Tighten the Screw Until the Nut Splits Has Rugged 

Drop-Forged Frame 

■■Do Not Use on Heat-Treated Nuts 

■■Length: 6-3/4" 

■■This is a Serviceable Product 

Universal Nut Cracker 


715D 082171007156 Carded Universal Nut Cracker 1.50 lb 

71575D 082171715754 Bagged Replacement Plunger 0.05 lb 

71574 082171715747 Bagged Replacement Chisel 0.25 lb 

71573D 082171715730 Bagged Replacement Ball Bearings 0.01 lb 


990


5 Pc. Screw Extractor Set 


■■The Style Preferred By Professionals Since Straight, Tapering 

Flutes Grip More Securely Than Spiral Styles 

■■Will Not Cause the Screw or Pipe Being Removed to Expand and 

Bind 

■■Can Be Used for Either Right or Left Handed Screws, Bolts, 

Studs, or Pipe Threads 

■■Drill A Hole in the Broken Screw, Bolt or Stud; Lightly Tap the 

Extractor with A Hammer; and Turn it with A Wrench. 

■■Meets or Exceeds US Federal Spec. GGG-E-936B 

Cat. No. UPC No. Packaging For Use on Screw Sizes For Use on Pipe Sizes Product Weight Shelf Pack Qty. 

70-970 781412709704 Boxed #12 to 5/8 in 1/8 in to 3/8 in 8.72 lb 1 


29-418 Vinyl Roll 5 Pockets 70-954 Screw Extractor 15/64" 

70-950 Screw Extractor 1/8" 70-956 Screw Extractor 5/16" 

70-952 Screw Extractor 3/16" 70-958 Screw Extractor 3/8" 



■■The Style Preferred By Professionals Since Straight, Tapering 

Flutes Grip More Securely Than Spiral Styles 

■■Will Not Cause the Screw or Pipe Being Removed to Expand and 

Bind 

■■Can Be Used for Either Right or Left Handed Screws, Bolts, 

Studs, or Pipe Threads 

■■Drill A Hole in the Broken Screw, Bolt or Stud; Lightly Tap the 

Extractor with A Hammer; and Turn it with a Wrench. 

■■Meets or Exceeds US Federal Spec. GGG-E-936B 


For Use on Screw 

Sizes 

For Use on 

Pipe Sizes Shank Size Tip Size 

Use Drill 

Size 

Minimum 

Depth of 

Drilled Hole 

70-950 781412709506 Bagged #12 to 5/16 in - 0.188 in 0.125 in 0.125 in 0.375 in 0.03 lb 1 

70-952 781412709520 Bagged 5/16 in to 3/8 in - 0.188 in 0.172 in 0.188 in 0.500 in 0.03 lb 1 

70-954 781412709544 Bagged 7/16 in to 1/2 in 1/8 in 0.250 in 0.203 in 0.234 in 0.500 in 0.04 lb 1 



70-960 781412709605 Bagged 5/8 in to 3/4 in - 0.438 in 0.422 in 0.469 in 0.688 in 0.21 lb 1 

70-962 781412709629 Bagged 3/4 in to 1 in 1/2 in 0.500 in 0.500 in 0.563 in 0.688 in 0.28 lb 1 

70-964 781412709643 Bagged 1 in to 1-1/8 in 1/2 in 0.625 in 0.594 in 0.656 in 0.750 in 0.46 lb 1 

70-966 781412709667 Bagged 

1-1/8 in to 

1-3/8 in 

Product 

Weight 

Shelf Pack 

Qty. 

3/4 in 0.750 in 0.719 in 0.813 in 0.750 in 0.73 lb 1 

10 

C U T T I N G 

991

H A C K S A W F R A M E S 

4-in-1 Pro Series Hacksaw Frame 

■■Standard 90 degree for general use 

■■45 degree angle for flush cuts 

■■Low profile position for tight spaces 

■■Jab saw configuration for a variety of inside cuts 

■■High tension for tightening the blade up to 30,000 psi 

■■Cushion grip handle for better control and comfort 

■■Magnetic blade storage inside frame 

Cat. No. UPC No. Packaging Type of Frame Blade Length Product Weight Shelf Pack Qty. 

80975 037103809759 Carded 4-In-1 Pro Series Hacksaw Frame 12 in 2.50 lb 4 

Cushion Grip Hacksaw Frame 

■■Rugged, lightweight frame built for professional tool users 

■■High tension reading, increased blade beam strength 

■■Uses high tensile strength Nicholson ® Bi-Metaloy ® hand hacksaw 

blades 

■■Screw-operated lever for tensioning the blade up to 30,000 PSI 

■■Blade can be positioned for 45° or 90° cutting 

■■Spare blades can be stored inside frame 

■■End of frame can be used as a jab saw 


80965 037103809650 Carded Cushion Grip High Tension 12 in 2.40 lb 6 


High Tension Hacksaw Frame 

■■Quick changing blades 

■■Adjustable crank handle for tension up to 30,000 PSI torque 

■■Spare blades can be stored inside frame 

■■Blade can be positioned for 45° or 90° cutting 

■■End of frame can be used as a jab saw 


80956 037103809568 Carded High Tension Adjustable 12 in 1.80 lb 6 

■■High impact, contoured handle 

■■Adjust from 10" to 12" 

■■45° blade adjustment 

Heavy Duty Hacksaw Frame- Nicholson 


80952 037103809520 Carded Adjustable 10 in, 12 in 1.80 lb 6 

992

H A C K S A W F R A M E S 

General Purpose Hacksaw Frame 

■■Instantly adjustable for 10"/250mm to 12"/300mm blades 

■■Adjusts 90° for vertical or horizontal cuts 



■■Adjustable from 10"/250mm to 12"/300mm 

■■Cuts to 2.75"/70mm in depth 

■■For DIY and home use 

Economy Hacksaw Frame 



Little-Nic® Utility Hacksaw 

■■For professionals and homeowners 

■■Gets into small places, makes difficult cutting jobs easy 

■■Overall length 10 

■■Uses any standard size hacksaw blade 

■■Comes complete with high quality Nicholson ® SS1024 

hacksaw blade 

■■Blister packed on attractive cards with suggested uses on back 

10 

Cat. No. UPC No. Packaging Blade Length Product Weight Shelf Pack Qty. 

80968 037103809681 Carded 10 in 0.30 lb 6 

Jab Saw with Sheath 

■■Aggressive tooth design 

■■Cuts on the push and pull stroke 

■■Sharpened tip makes cutting drywall easier 

■■Non-slip, comfort grip handle 

■■Includes ballistic nylon sheath for safe storage 

■■Great for projects such as drywall, cement board, wood or plastic 

C U T T I N G 


NS500 037103212269 Carded 6.5 in 0.62 lb 4 

993

J A B S A W S 

Jab Saw 

■■Special saw always needed for the difficult jobs 

■■Designed for those hard-to-reach areas 

■■Jab saw will work with any standard size hacksaw blade 

■■Can replace worn blade easily 

■■Untighten adjusting saw, remove worn blade and replace 

■■Replace with a new Nicholson® blade, re-tighten the adjusting 

screw 


80969 037103809698 Carded 10 in 0.30 lb 12 

Bi-Metaloy Hand Hacksaw Blades 

■■Molybdenum alloy tool steel edge 

■■Tough flexible high carbon steel backing 

■■Lasts twice as long as high-speed steel 

■■Lasts up to ten times longer than carbon steel 

■■Operates 20% to 50% faster 

■■High tooth hardness and shock resistance 

■■2 Blades per card - 10 cards per bag - 40 bags per carton 


Cat. No. UPC No. Packaging Set Type Length TPI/PPI Width Gauge Product Weight Shelf Pack Qty. 

62635 037103626356 Boxed Wavy 10 in 18 0.50 in 0.025 in 0.04 lb 100 


62706 037103627063 Boxed Raker 12 in 14 0.50 in 0.025 in 0.04 lb 100 




62811 037103628114 Carded Wavy 10 in 18 0.50 in 0.025 in 0.08 lb 10 




62835L 037103188069 Carded Wavy 12 in 24 0.50 in 0.025 in 0.45 lb 4 

62836L 037103188076 Carded Wavy 12 in 18 0.50 in 0.025 in 0.43 lb 4 

62838 037103628381 Carded Wavy 12 in 18/24/32 0.50 in 0.025 in 0.30 lb 10 


994

H A C K S A W B L A D E S 

Solid Flexible Carbon Steel Hacksaw Blades 

■■Solid high carbon steel 

■■Tempered to provide hard edge with flexible back 

■■Specially hardened to induce toughness 

■■Economy blade for sawing light to medium-hard materials 

■■A good balance of wear resistance, mechanical shock 

absorbing properties 

■■Virtually unbreakable 

■■2 blades per card - 10 cards per bag - 40 bags per carton 

Cat. No. UPC No. Packaging Set Type Length TPI/PPI Width Gauge Product Weight Shelf Pack Qty. 









Predator Handsaws 

■■Ergonomic handle with rubber-coated grip for comfort 

and control 

■■Razor sharp diamond ground teeth for easier cuts 

■■Induction hardened Hard Point (H.P.) teeth never 

need resharpening 

■■Handle features 45/90 degree shape for marking angles 

Cat. No. UPC No. Packaging Length Points Per Inch Tooth Type Product Weight Shelf Pack Qty. 

NSP1 037103172358 Carded 24 in 8 Standard Hard Point 1.17 lb 4 

NSP2 037103172365 Carded 24 in 10 Standard Hard Point 1.17 lb 4 

NSP5 037103172396 Carded 15 in 8 Aggressive Hard Point 0.82 lb 4 

10 

■■Precision set teeth for smooth cuts 

■■Hardened and tempered polished steel blade 

■■Resharpenable teeth for long life 

Professional Handsaws 


NS1501 037103172310 Carded 24 in 8 Standard 1.25 lb 2 




C U T T I N G 

995

H A N D S A W S 

■■Precision set teeth for smooth cuts 

■■Hardened and tempered polished steel blade 

■■Resharpenable teeth for long life 

■■Handle features 40/90 degree shape for long life 

Quik-Cut Economy Handsaw 


NS503N 037103227126 Carded 15 in 8 Standard 0.95 lb 10 

4-1/4" Coping Saw 

■■Popular with carpenters and home craftsman 

■■Throat opening permits cuts up to 4-1/4" 

■■Spring steel, rounded edge frame with polished finish 

■■Adjustable angle blade 

■■Straight type wood handle 

Cat. No. UPC No. Packaging Length Points Per Inch Blade Length Blade Width Product Weight Shelf Pack Qty. 

80170 037103801708 Carded 12-1/2 in 15 6-1/2 in, 165 mm 1/8 in, 3.17 mm 0.50 lb 10 


6-1/2" Coping Saw 

■■Used for cutting sharp angles and curves 

■■Throat opening permits cuts up to 6-1/2"/165mm 

■■Spring steel, rounded edge frame with polished finish 

■■Adjustable angle blade 

■■Straight type wood handle 

Cat. No. UPC No. Packaging Length Points Per Inch Blade Length Blade Width Product Weight Shelf Pack Qty. 

80176 037103801760 Carded 12-3/4 in 15 6-1/2 in, 165 mm 1/8 in, 3.17 mm 0.50 lb 10 

Coping Saw Blades 

■■6-1/2"/165mm long 

■■15 points, pin end 

■■Fits Nicholson® model No. 80170 and 80176 frames 

■■Blister packed 

■■5 blades per card 

Cat. No. UPC No. Packaging Length Points Per Inch Blade Width Product Weight Shelf Pack Qty. 

80182N 037103801821 Carded 6-1/2 in 15 1/8 in, 3.17 mm 0.03 lb 20 

996


Predator® Compass/Keyhole Saw 

■■Ergonomic handle with rubber-coated grip for comfort 

and control 

■■Razor sharp diamond ground teeth for easier cuts 

■■Induction hardened Hard Point (H.P.) teeth never 

need resharpening 

■■Blade tapered to a point for starting holes and cutting curves 


NSP9 037103172426 Carded 12 in 8 Hard Point 0.40 lb 4 

BowHack® Combination Bowsaw and Hacksaw 

■■Flat ground 

■■For smooth cutting of paneling, plywood and laminates 

■■Made from finest alloy saw steel 

■■Stays sharper longer, resists rust 

■■Easily resharpened 

■■Cuts smoother with less friction 

Cat. No. UPC No. Description Packaging Length Product Weight Shelf Pack Qty. 

80777 037103807779 12” Bow Hack Combination, Hi-Viz Frame Display 12 in 1.40 lb 5 

80799 037103807991 12” Bow Hack Combination, Black Frame Display 12 in 1.45 lb 10 

80814 037103808141 12" Bow Saw Replacement Blade Bulk with UPC 12 in 0.75 lb 10 

Curved Pruner 

■■General-purpose pruner for fast cutting of small limbs 

■■A favorite in citrus groves and vineyards 

■■Silver Steel® constructed blade with polished finish 

■■Easy-to-grip knife-type wood handle trimmed with 

aluminum screws 

■■Full cardboard sleeve protects the blade 

10 

Cat. No. UPC No. Packaging Length Reverse Rip Points Per Inch Product Weight Shelf Pack Qty. 

80263 037103802637 Carded 14 in 6 0.50 lb 6 

■■Lightweight, economy pruner 

■■Dual-purpose pruner 

■■Special steel constructed blade 

■■Fine teeth on one edge for light trimming 

■■Teeth on opposite edge for heavier limbs 

■■Wood handle 

■■Plastic sleeve for blade protection 

Double Edge Pruner 

C U T T I N G 

Cat. No. UPC No. Packaging Length Points Per Inch Product Weight Shelf Pack Qty. 

80269 037103802699 Carded 16 in 8 (fine edge) 0.80 lb 6 

997


Silver Flash Pruner 

■■Heavy-duty 

■■Preferred by utility crews and tree surgeons 

■■Silver Steel® constructed blade, flat ground 

■■Concave cutting edge has precision set and bevel filed teeth 

■■Teeth cut fast on the pull stroke 

■■Extra large teeth and gullets for speed cutting large limbs 


■■Full cardboard sleeve protects blade 


80299 037103802996 Carded 26 in 1.50 lb 6 

Tuttle Tooth Pruner 

■■All-purpose saw for general pruning 

■■Special steel constructed blade 

■■Teeth designed for fast cutting of large limbs and firewood 


■■Full cardboard sleeve protects blade 


80309 037103803092 Carded 24 in 1.80 lb 6 


998

File Sets and Assortments................. 1002 

American Pattern Files...................... 1007 

American Pattern Rasps.................... 1021 

X.F. Files – Swiss Pattern................. 1024 

Curved Tooth Files............................. 1030 

File Accessories................................. 1032 

Standard Bastard Files...................... 1035 

11 

F I L E S 

999

F I L E S 

Files 

In 1864, the Nicholson File Company became the first successful manufacturer of machine-made files. Today, Nicholson ® is the most 

recognized brand of files in the world. Over the years, the Nicholson product line has increased in scope and size, and now includes 

files, rasps and handsaws, all manufactured to uncompromising standards of quality. 

Hang hole 

for easy storage 

Every Nicholson file is precision 

engineered to provide maximum gram 

removal per stroke and amazing longevity 

Rear taper allows your hand to lock securely 

around handle for increased push force 

Rubber coating and rounded shape eliminates 

pressure points 

Raised ribs, wide middle, and 

flared neck prevent slipping 

Nicholson files are manufactured 

to rigorous specifications and with 

the utmost attention to detail for 

uncompromised quality 

ERGONOMIC 

FILES 

Nicholson ergonomic files 

are available in sets. This 

9 piece set fits easily 

and securely into rugged 

compact pouch. 

F I L E S 11 

The Nicholson File Operations facilities in Sorocaba, 

Brazil and Cali, Colombia conform to Quality 

Standards ISO 9001. 

Files 

The following manuals and instruction leaflets are 

available. Please ask your local distributor or Apex 

Tool Group representative for copies. 

• The Guide to Files and Filing - #5530704 

GearWrench ® offers a range of the most popular handled files that provide comfort, versatility and optimum material removal. 

GearWrench files are available in a limited range of standard sizes and miniature files. 

Each GearWrench file is engineered to provide 

maximum material removal per stroke with 

outstanding longevity 

Dual material ergonomic handle provides 

optimal balance of strength, comfort and 

performance 

GearWrench files are available in flat, 

round, half round, triangle, square and 

knife designs 

GearWrench file sets 

provide all the files 

needed for many 

applications 

1000

F I L E S 

File Terminology 

COURSENESS 

AMERICAN PATTERN 

SWISS PATTERN 

Bastard Cut Second Cut Smooth Cut 

00 0 1 

• Work to be accomplished, whether roughing or finishing, will determine type of teeth and coarseness for each application 

• Most American pattern files are available with 3 grades of cut: bastard-cut, second-cut and smooth-cut 

• Swiss pattern files are available in seven cuts: No. 00, 0,1, 2, 3, 4, and 6 

• The degree of coarseness is greater in longer files, but differences between bastard, second and smooth are proportionate 

LENGTH 

Tang Heel Belly Point 

SHAPE 

2 3 4 6 

Length 

• Length is measured exclusive of tang, from point to heel,unless 

specified otherwise 

• Desired stroke length, type of material and size will determine length required 

• Area to be filed will determine specific cross-section (round, square, flat, 

etc.) to be used 

Kinds of Teeth 

SINGLE-CUT 

RASP-CUT 

• Single set of parallel, diagonal rows of teeth 

• Single-cut files are often used with light pressure to produce a smooth 

surface finish or to put a keen edge on knives, shears or saws 

DOUBLE-CUT 

• Series of individual teeth which are formed by a single-pointed tool 

• Produces a rough cut that is used primarily on wood, hooves, aluminum and lead 

MAGICUT® 

11 

• 2 sets of diagonal rows of teeth 

• Second set of teeth cut in opposite diagonal direction and on top 

of the first set 

• First set of teeth is known as the overcut, second is known as upcut 

• Upcut is finer than overcut 

• Double-cut file is used with heavier pressure than the single-cut and 

removes material faster from the workpiece 

• Single cut teeth divided by angular serrations into shorter cutting edges, which free 

themselves readily from chips and perform roughing and smoothing at the 

same time 

CURVED-CUT 

• Teeth arranged in curved contours across the file face 

• Curved-cut file is normally used in automotive body shops for smoothing 

body panels 

F I L E S 

Safety Information 

WARNING 

Wear safety goggles to protect your eyes. 

Never use a file without a tight fitting handle. 

AVERTISSEMENT 

Porter des lunettes de protection. 

Ne jamais utiliser une lime sans poignée bien ajustée. 

ADVERTENCIA 

Use gafas de seguridad para proteger sus ojos. 

Nunca utilice una lima con el mango suelto. 

WARNING 

Risk Of Eye Injury 

Wear ANSI Approved 

Eye Protection 

AVERTISSEMENT 

Risque de dommages d'oeil 

Protection d'oeil approuvée 

de l'usage A.N.S.I. 

ADVERTENCIA 

Riesgo de lesión del ojo 

Protección de ojo aprobada 

del desgaste ANSI 

1001

F I L E S E T S A N D A S S O R T M E N T S 

9 Pc. Ergonomic File Set 

■■Rubber-Coated Ergonomic Handles for Better Comfort 

and Control 


22030HNN 037103243881 Pouch 4.35 lb 1 


21701HN 10" Mill Bastard Cut, Ergonomic Handle 21842HN 12" Mill Bastard Cut, Ergonomic Handle 

21729HN 6" Slim Taper File, Ergonomic Handle 21868HN 10" Flat Bastard Cut, Ergonomic Handle 

21745HN 8" Half Round Bastard Cut, Ergonomic Handle - 6" xx Slim Taper File, Ergonomic Handle 

21746HN 10" Half Round Bastard Cut, Ergonomic Handle - 10" Round Bastard File, Ergonomic Handle 

21748HN 8" Flat Bastard Cut, Ergonomic Handle 

5 Pc. Ergonomic File Set 


and Control 

■■General Purpose Selection for Home and Professional Use 

■■Set of 5 Files Fits Easily and Securely Into Rugged, 

Compact Pouch 

F I L E S 11 


22040HNN 037103243904 Pouch 2.20 lb 1 


21694HN 8" Mill Bastard Cut, Ergonomic Handle 21746HN 10" Half Round Bastard Cut, Ergonomic Handle 

21701HN 10" Mill Bastard Cut, Ergonomic Handle 21748HN 8" Flat Bastard Cut, Ergonomic Handle 

21729HN 

6" Slim Taper File, Ergonomic Handle 

8" Ergonomic File Set 


and Control 

■■Basic Selection for Home and Professional Use 


22018HN 037103244901 Pouch 1.05 lb 3 


21694HN 8" Mill Bastard Cut, Ergonomic Handle - 8" Round Bastard Cut, Ergonomic Handle 

21745HN 8" Half Round Bastard Cut, Ergonomic Handle 

1002


3 Pc. 6" Ergonomic File Set 


and Control 

■■Basic Selection for Home and Professional Use 


22015HNN 037103243829 Pouch 0.70 lb 1 


04798HN 6" Half Round Bastard Cut, Ergonomic Handle - 6" Round Bastard Cut, Ergonomic Handle 

21687HN 6" Mill Bastard Cut, Ergonomic Handle 

■■For Home and Professional Use 

9 Pc. Maintenance File Set 


22030NN 037103243898 Pouch 3.45 lb 1 


03632N 8" Flat Smooth Cut 08642N 10" Mill Bastard Cut 

03665N 10" Flat Bastard Cut 12019 10" Round Bastard Cut 

03731N 10" Flat Smooth Cut 14224M 6" Slim Taper File 

04896N 8" Half Round Bastard Cut 18924N 8" 4-in-Hand® Rasp and File 

04995N 10" Half Round Bastard Cut 

11 

■■Includes a File Cleaner Card 

■■Features a Rugged, Compact Pouch 

8 Pc. Machinist File Set 

F I L E S 


22025NN 037103243874 Pouch 3.35 lb 1 



03731N 10" Flat Smooth Cut 13196 10" Square Bastard Cut 

04995N 10" Half Round Bastard Cut 14255M 7" Slim Taper File 

08642N 10" Mill Bastard Cut 21458 10" File and Rasp Cleaner 

1003


■■General Purpose File Kit for Machine Shop 

7 Pc. Machinist File Set 


22024NN 037103243867 Pouch 2.50 lb 1 



03731N 10" Flat Smooth Cut 13196 10" Square Bastard Cut 

04995N 10" Half Round Bastard Cut 14255M 7" Slim Taper File 

08642N 10" Mill Bastard Cut 

6 Pc. 4"/100mm American Pattern File Assortment 

■■4" Warding, Half-Round, Round, Hand, Square and Slim Taper 

Files 

■■All Files Come with Handles 

■■Kit Comes in Bastard-Cut Only 

■■Six of the Most Popular 4" Files Packaged in An Attractive 

Plastic Pouch 

F I L E S 11 


22062NN 037103243928 Pouch 0.40 lb 2 

5 Pc. General Purpose Set 

■■General Purpose File Kit for Home and Professional Use 

■■Set of 5 Files Fits Easily and Securely Into Rugged, 

Compact Pouch 


22040NN 037103243911 Pouch 1.80 lb 1 


04995N 10" Half Round Bastard Cut 08642N 10" Mill Bastard Cut 

08497N 8" Mill Bastard Cut 14224M 6" Slim Taper File 

08560N 8" Mill Smooth Cut 

1004


4 Pc. Thread Restoring File Set 

■■Used to Restore Damaged or Worn External Threads on Bolts, 

Pipes, Etc. 

■■Each Thread Restoring File Will Work with 8 Different 

Thread Sizes 

■■Convenient 4-Piece Set 

■■Color Caps on Tubes 

■■Type 1 Black Cap: Regular Bolt; 11, 12, 13, 14, 16, 18, 20, 24 Tpi 

■■Type 2 Red Cap: Ex. Fine/Ex. Coarse Bolt; 9, 10, 12, 16, 20, 27, 

28, 32 Tpi 

■■Type 7 Green Cap: Regular Pipe; 8, 10, 11 1/2, 14, 16, 18, 

24, 27 Tpi 

■■Type 8 Blue Cap: Metric Bolt; .80, 1.00, 1.25, 1.50, 1.75, 2.00, 

2.50, 3.00 mm 


33024 037103330246 Pouch 1.60 lb 1 


4 Pc. Handy Man's Home File Pack 


22017NN 037103243843 Pouch 0.82 lb 5 

11 



11716N 6" Round Bastard Cut 18924N 8" 4-in-Hand® Rasp and File 

3 Pc. File Pack 


■■Pack Contains Files for Every Purpose 

■■6"/150mm Slim Taper File 

■■6"/150mm Round File 

■■6"/150mm Mill Bastard File 

■■Plastic Pouch Lists Suggested Uses for Each File 

■■Pack Measures 3-1/2"/88mm X 9-1/2"/237mm with Hang Up Hole 

F I L E S 


22015NN 037103243836 Pouch 0.28 lb 5 



11716N 6" Round Bastard Cut 

1005


6 Pc. Hobby File Set 

■■Selection of 6 Miniature Files with Fine Cut for Intricate Work 

■■1 Each of Equaling, Half Round, Flat, Round, Three Square, 

Square Files 

■■Handy Vinyl Case Vacuum Packed on Hang Up Card 

■■Ideal for Handycrafts and Hobbies 


42030 037103420305 Pouch 5-1/2 in 0.10 lb 6 

X.F.® Swiss Pattern Needle File Assortment Sets 

■■Made to More Exacting Measurements Than American 

Pattern Files 

■■Used Primarily By Jewelers, Die Makers, Watchmakers and 

Fine Toolmakers 


■■Assortments of 12 File Shapes, Based on Length and Cut 

■■Assortments also Include Joint and Marking Files 

F I L E S 11 

Cat. No. UPC No. Packaging Length File Cut Product Weight Shelf Pack Qty. 

37029 037103370297 Pouch 4 in 0 0.10 lb 1 

37392 037103373922 Pouch 5-1/2 in 0 0.20 lb 1 

37755 037103377555 Pouch 6-1/4 in 0 0.25 lb 1 

37035 037103370358 Pouch 4 in 2 0.13 lb 1 

37398 037103373984 Pouch 5-1/2 in 2 0.20 lb 1 

37761 037103377616 Pouch 6-1/4 in 2 0.25 lb 1 

37404 037103374042 Pouch 5-1/2 in 4 0.20 lb 1 

37767 037103377678 Pouch 6-1/4 in 4 0.25 lb 1 

Thread Restoring Files 

■■Used to Restore Damaged or Worn External Threads on Bolts, 

Pipes, etc. 

Cat. No. UPC No. Packaging File Cut Style Tooth Type Product Weight Shelf Pack Qty. 

33007 037103330079 Bagged Ex Fine/Ex Coarse Bolt 2 Thread Teeth 0.40 lb 16 

33016 037103330161 Bagged Metric Bolt 8 Thread Teeth 0.35 lb 12 

33001 765957299173 Bagged Regular Bolt 1 Thread Teeth 0.40 lb 12 

1006

A M E R I C A N P A T T E R N 

Aluminium Files - Type "A" Flat 

■■American Pattern Flat Aluminum Type 

■■Special Tooth Construction Eliminates Clogging When 

Filing Aluminum 

■■Flat Shape 

■■All Sizes Have Same Number of Teeth Per Inch 

■■Smooth Finish Obtained By Using Shearing Cut Toward Left 


00001N 037103242525 Boxed 6 in Double Cut 0.10 lb 12 




Chain Saw Files - Round 

■■American Pattern Round Chainsaw File 

■■Tighten Tension on Chain to Firmly Support Cutters When Filing 

■■File From Inside to Outside of Cutter 

■■Place File Against Beveled Cutting Surface of Teeth 20° to 45° 

with Saw 

■■Follow Saw Manufacturers' Specifications 

■■Sharpen All Left Hand Cutters on One Side of Chain 

■■Then Move to the Other Side and File All the Right Hand Cutters 

■■Check Depth Gauge Height Every 2 or 3 Sharpenings 

■■Height Between Cutting Teeth and Depth Gauge is Between 

0.020" to 0.030" 

Cat. No. UPC No. Packaging Packaged Length Diameter File Cut Product Weight Shelf Pack Qty. 

01590 714994015901 Carded 1/Card 6 in 1/8 in Knurl Cut 0.08 lb 6 

02144N 037103221735 Boxed - 6 in 1/8 in Knurl Cut 0.02 lb 6 









02229B 037103232960 Bagged - 8 in 3/16 in Knurl Cut 0.19 lb 4 






11 

F I L E S 

1007


Chain Saw Files - Flat 

■■American Pattern Flat Chainsaw File 

■■Used for Cutter-Raker Type (2 Round Edges) Chain Saw 

■■Rectangular Shape 


02215N 037103242563 Boxed 8 in Single 0.25 lb 12 

Depth Gauge Chain Saw File 

■■American Pattern Depth Gauge Chainsaw File 


■■Single Cut, Safe Edges 

■■Length Shown is Overall Length of File 

■■Used for Filing and Maintaining Proper Depth Gauge Clearance 



F I L E S 11 

Double Ender Files 

■■American Pattern Taper File, Regular 

■■Triangular Shape 

■■Tapers Slightly Towards the Point 

■■File Supplied with Handles 

■■Double-Ended 1/2 File 

■■Sides and Edges Are Single-Cut From Points to Center Giving 

Full Use of File 


02884M 037103143914 Boxed 6 in Single 0.05 lb 12 



Farmer's Own File 

■■American Pattern Farmer'S Own File 

■■General Purpose File Suited for Agricultural Use 

■■Rectangular Shape, Single Cut, Safe Edges 

■■Length Measured Exclusive of Handle 

■■Convenient Hang Up Hole 


06637N 037103242860 Carded 6 in Single 0.30 lb 6 




1008


Flat Files 

■■American Pattern Flat File, Bastard Cut 

■■Used By Machinists, Machinery Builders, Ship and 

Engine Builders 

■■Also By Repairman and Others Who Require Rapid Removal 

of Metal 

■■Rectangular in Cross Section and Taper Slightly Towards Point 

in Width 

■■Double Cut on Sides, Single Cut on Edges 

Cat. No. UPC No. Packaging Length Handled File Cut Product Weight Shelf Pack Qty. 

03367N 037103242600 Boxed 4 in No Bastard 0.03 lb 12 


21867N 037103243607 Carded 6 in No Bastard 0.15 lb 3 


21748HN 037103243485 Carded 8 in Ergonomic Bastard 0.35 lb 6 









03401N 037103242617 Boxed 4 in No Second 0.03 lb 12 






03434N 037103242624 Boxed 4 in No Smooth 0.03 lb 12 


03534N 037103242662 Carded 6 in No Smooth 0.15 lb 6 







11 

F I L E S 

1009


Half Round Files 

■■American Pattern Half Round File, Bastard Cut 

■■Used on Concave, Convex and Flat Surfaces 

■■Rounded on 1 Side, Flat on Opposite 

■■Rounded Sides of All Half-Round Bastard Files Are Double-Cut 

■■Flat Sides of All Half-Round Files Are Double Cut 

F I L E S 11 








21745N 037103219022 Carded 8 in Yes Bastard 0.40 lb 6 






















1010


Hand Files 

■■American Pattern Hand File, Bastard Cut 


■■Double Cut 

■■1 Safe Edge 

■■Same Coarseness As Flat Files of Corresponding Lengths 


05652N 037103241443 Boxed 4 in Bastard 0.05 lb 12 






05675N 037103241450 Boxed 4 in Second 0.05 lb 12 



06001NN 037103241535 Boxed 10 in Second 0.50 lb 6 


05804N 037103241481 Boxed 6 in Smooth 0.15 lb 12 




Handy File 

■■American Pattern Handy File 

■■One Side is Single Cut for Tool Sharpening and Smoothing 

Metal Surfaces 

■■Reverse Side is Double-Cut for General Filing and Rapid 

Stock Removal 


■■1 Cut Edge, 1 Safe Edge 



06602N 037103242853 Boxed 8 in Single/Double 0.60 lb 12 

06601N 037103242846 Carded 8 in Single/Double 0.37 lb 6 


Home and Garden File 

■■American Pattern Home and Garden File 

■■Ideal Utility File for Home Owner 

■■For Sharpening Woodworking Tools (Chisels, Scrapers) 

■■Also for Garden Tools (Hoes, Shovels, Rotary Mower Blades) 


11 

F I L E S 



1011


Knife Files 

■■American Pattern Knife File, Bastard Cut 

■■Used Primarily By Tool and Die Makers with Work Having 

Acute Angles 


■■Double-Cut on Sides, Single-Cut on Sharp Edge 

■■Knife Files Are Supplied with Safe Backs 


07090N 037103241764 Boxed 12 in Back 0.70 lb 6 














F I L E S 11 

Long Angle Lathe Files - Bastard 

■■American Pattern Flat Long Angle Lathe File, Bastard Cut 

■■Rapid, Free Cutting Files Designed for Lathe Filing 


■■Single Cut 

■■Safe Edges to Protect Shoulder or Dog 

■■Made on Flat File Blanks in Bastard-Cut 

■■Cut Faster Than Regular Mill Files and Leave Smoother Finish 





Long Angle Lathe Files - Fine 

■■American Pattern Hand Long Angle Lathe File, Fine Cut 

■■Specially Designed for Finishing Rapid Stock Removal 

on Lathe Work 


■■Safe Edges 

■■Cut Faster Than Regular Mill Files and Leave Smoother Finish 


07835N 037103241597 Boxed 8 in Fine 0.30 lb 12 




1012


Magicut® Files - Flat 

■■American Pattern Flat Magicut® File 

■■Used By Machinists As All-Purpose File to Remove 

Stock Rapidly 

■■Leaves A Smooth Finish 

■■Rectangular Shape, Tapered Point in Width 

■■File Features A Pattern of Narrow Chip Breakers 

■■Created By Steep, Angled Serrations for Rapid Removal, 

Smoother Finish 


07894N 037103242969 Boxed 8 in No Magicut® 0.25 lb 12 




11 

F I L E S 

1013


Mill Files 

■■American Pattern Mill File, Bastard Cut 

■■Used for Sharpening Mill or Circular Saws 

■■Also for Draw-Filing and Finishing Metals 


■■Single Cut on Sides and Edges 

■■2 Square Edges 

■■All Sizes Taper Slightly in Width 

F I L E S 11 
















21842HN 037103243553 Boxed 12 in Ergonomic Bastard 0.80 lb 1 
















1014


Mill Files - 1 and 2 Round Edges 

■■Round Edges Are Used Where Rounding Gullets Are Preferred 

■■Compared to Sharp Corners or Squared Gullets 


■■Single Cut on Sides and Edges 

■■Bastard Cut 

■■Same As Regular Mill File Except It Has 1 Round Edge 

Cat. No. UPC No. Packaging Length Handled File Cut Edge Type Product Weight Shelf Pack Qty. 

09099N 037103243232 Boxed 8 in No Bastard One Round 0.25 lb 12 

09389N 037103243263 Boxed 8 in No Bastard Two Round 0.25 lb 12 


09469N 037103243270 Boxed 10 in No Bastard Two Round 0.45 lb 12 


Axe Sharpening File 

■■American Pattern Axe Sharpening File 

■■Ideal for Sharpening Axes and Miscellaneous Garden Tools 


■■Double-Cut on 1 Side, Single-Cut on Opposite 

■■2 Safe Edges 




06706N 037103242914 Carded 8 in Single/Double 0.50 lb 6 

Square Files 

■■American Pattern Square File, Bastard Cut 

■■Used on Slots, Keyways and General Surface Filing 

■■Square Shape 


■■Tapered Slightly Towards Point 

■■Larger Sizes Frequently Preferred to Corresponding Flat Files 

■■This is Due to A Heavier Section and 4 Filing Surfaces 

Cat. No. UPC No. Packaging Length Diameter File Cut Product Weight Shelf Pack Qty. 

12790 037103127907 Boxed 4 in 5/32 in Bastard 0.03 lb 12 






13000N 037103130006 Boxed 6 in 1/4 in Second 0.08 lb 12 

13114 037103131140 Boxed 8 in 5/16 in Second 0.10 lb 12 



12857 037103128577 Boxed 4 in 5/32 in Smooth 0.03 lb 12 





11 

F I L E S 

1015


Round Files 

■■American Pattern Round File, Bastard Cut 

■■Primarily Used to File Circular Openings or Concave Surfaces 


■■Tapered Slightly Towards Point 

■■Round Shape 

■■Safe Point on Round Files 

F I L E S 11 

Cat. No. UPC No. Packaging Length Handled Diameter File Cut Product Weight Shelf Pack Qty. 

11526N 037103231901 Boxed 4 in No 1/8 in Bastard 0.02 lb 12 



21708N 037103232007 Carded 6 in Yes 1/4 in Bastard 0.21 lb 6 

21846N 037103232014 Carded 6 in No 1/4 in Bastard 0.12 lb 3 

11904 037103119049 Boxed 8 in No 5/16 in Bastard 0.14 lb 12 

21715 037103217158 Carded 8 in Yes 5/16 in Bastard 0.26 lb 6 

21853 037103218537 Carded 8 in No 5/16 in Bastard 0.16 lb 6 






11559NN 037103231895 Boxed 4 in No 1/8 in Second 0.02 lb 12 

11748N 037103231987 Boxed 6 in No 1/4 in Second 0.05 lb 12 

11936 037103119360 Boxed 8 in No 5/16 in Second 0.10 lb 12 



11592NN 037103231918 Boxed 4 in No 1/8 in Smooth 0.02 lb 12 

11781N 037103231994 Boxed 6 in No 1/4 in Smooth 0.05 lb 12 

11969 037103119698 Boxed 8 in No 5/16 in Smooth 0.20 lb 12 



Taper Files - Heavy 


■■Made for Filing Saws with 60° Angle Teeth 


■■Edges Set and Cut for Filing Gullets Between Saw Teeth 


■■When Filing Handsaws, It is Important to Select the Right File 



1016


Taper files - Regular 







■■When Filing Handsaws, It is Important to Select the Right File 



13710M 037103162533 Boxed 3-1/2 in Single 0.04 lb 12 







■■American Pattern Taper File, Machete 

■■Used for Sharpening Machete Knife Blades 

■■Single Cut with No Edge Teeth 

■■Triangular in Shape 


Taper Files - Machete 





11 

Taper Files - Slim 

■■American Pattern Taper File, Slim 






■■In Filing Handsaws, It is Important to Select the Right File 


14106M 037103142511 Boxed 4 in No Single 0.03 lb 12 

14139M 037103162625 Boxed 4-1/2 in No Single 0.04 lb 12 



21729HN 037103217882 Carded 6 in Ergonomic Single 1.00 lb 6 

21729N 037103217875 Carded 6 in Yes Single 0.20 lb 6 

21866N 037103217929 Carded 6 in No Single 0.11 lb 6 




14341N 037103218377 Boxed 10 in No Single 0.41 lb 12 

F I L E S 

1017


Taper Files - Extra Slim 

■■American Pattern Taper File, Extra Slim 


















F I L E S 11 

Taper Files - Double Extra Slim 

■■American Pattern Taper File, Double Extra Slim 















1018


Three Square Files 

■■American Pattern Three Square File, Bastard Cut 

■■For General Use By Machinists for Filing Internal Angles 

■■More Acute Than Right Angles, Clearing Out Square Corners 

■■Filing Taps and Gutters 



■■Sharp Corners Are Slightly Set and Cut 

■■Cut to the Point 











Tungsten Point Files 

■■American Pattern Tungsten Point File 

■■For Dressing Distributor Points That Are Tipped with 

Tungsten, Iridium 

■■Thin Rectangular Shape 

■■Double-Cut 

■■Chisel Tip of File Enters Slots or Gaps Easily 

■■Handle Shape Tang 

11 


02375N 037103242594 Carded 5-1/4 in Double 0.03 lb 6 

02373N 037103242587 Boxed 5-1/4 in Double 0.05 lb 12 

Veneer Knife Files 

■■American Pattern Veneer Knife File, Blunt, Bastard Cut 

■■Specially Designed for Sharpening Veneer Knives 


■■Blunt, Bastard Cut 

■■2 Round Edges 

F I L E S 



1019


Warding Files 

■■American Pattern Warding File, Bastard Cut 

■■Used Primarily By Locksmiths in Repairing & Filing Ward 

Notches in Keys 


■■Double Cut on Sides, Single Cut on Edges 

■■Also Suited for Use in Narrow Spaces Where Other Files Will 

Not Fit 











Wood Files (Coarse) - Half Round 

■■American Pattern, Half Round Wood File, Coarse 

■■Specially Coarse Teeth for Use on Wood 

■■Made in Same Section and Size As Half Round File 

F I L E S 11 


17505N 037103218636 Boxed 10 in Coarse 0.50 lb 6 

Wood Chuck 

■■Oversized, impact resistant co-mold handle for years of hard use 

■■Steel strike plate to protect against breakage or mushrooming 

■■Forged steel to retain rasp and chisel sharpness 

■■Edge teeth for removal of material in confined areas 

■■Polished and ground blade, extremely sharp for crisp cut 

■■Flat wood rasp for rapid stock removal 

Cat. No. UPC No. Packaging Blade Width Handled Product Weight Shelf Pack Qty. 

WC12CMN 037103219930 Carded 1/2 in Ergonomic 0.47 lb 3 

WC1CMN 037103219947 Carded 1 in Ergonomic 0.63 lb 3 

WC34CMN 037103219954 Carded 3/4 in Ergonomic 0.53 lb 3 

WCSET3CMN 037103219961 Carded 1/2 in Ergonomic 1.45 lb 3 

1020


4-in-Hand (Formerly Shoe Rasp) 

■■For the Homeowner, Home Craftsman, Boat Builder 

And Mechanic 

■■Half-Round Shape 

■■Has the File Section And Rasp Section on Both Flat Side And 

Half-Round Side 


18924N 037103219763 Boxed 8 in Rasp/Single/Double 0.35 lb 6 

21860N 037103219848 Carded 8 in Rasp/Single/Double 0.36 lb 6 





■■American pattern rasp, pattern maker’s cabinet 

■■Used primarily by cabinetmakers 

■■Half-round shape 

■■Narrow pattern, cut edges 

■■Used when smooth wood finish is required 

Pattern Maker's Cabinet Rasps 

Cat. No. UPC No. Packaging Length File Cut Code No. Product Weight Shelf Pack Qty. 

18846N 037103219640 Boxed 10 in Second 49 0.25 lb 6 

18861N 037103219626 Boxed 10 in Smooth 50 0.25 lb 6 

Cabinet Rasps 

■■American pattern rasp, half round cabinet, second cut 

■■Used by cabinetmakers and woodworkers 

■■Half round 

■■Single cut on edges 

■■Curved side of rasps similar to half-round rasps but has 

larger radius 

11 


17615N 037103219572 Boxed 8 in Regular Second 0.23 lb 12 



Diamond Horse Rasps 

■■Superior performance in both wet and dry conditions 

■■Resists clogging due to the angled tooth face 

■■Both sides are safe 7/8”/22mm at point 

■■Rasp teeth on 1 side, file teeth on opposite, single cut on edges 

■■Rasp side allows for aggressive, but controlled hoof removal 

■■File side produces a consistent smooth finish 

■■Rectangular shape 

■■Sharper than regular horse rasps 

■■HR15 (Outlaw) rasp is less aggressive, but extremely durable for 

long life 

F I L E S 


HR14N 037103219510 Boxed 14 in Rasp/Double 1.40 lb 6 

HR15 037103206343 Boxed 14 in Rasp/Double 1.65 lb 6 

1021


Farrier's Handy Rasps 

■■American pattern farrier's handy rasp, tanged 



■■Comfortable cushion grip at point and handle 

■■Rasp teeth on 1 side, file teeth on opposite 

■■Rasp cut is 6 teeth per row (other horse rasps have 

5 teeth per row) 

■■Body is the same as the 14" Plater's Special 


18155N 037103219558 Boxed 14 in Rasp/Double 1.45 lb 5 

Horse Rasps - Plain 1/2 File 

■■American pattern horse rasp, plain 1/2 file, regular 

■■This thin fine-toothed rasp for shoeing racetrack riding 

horses & ponies 

■■Plain horse rasps are double-ended with rasp teeth on 1 side 

■■File teeth on opposite side 



17873N 037103219459 Boxed 14 in Rasp Punch/Coarse 1.10 lb 6 

17903N 037103217998 Boxed 14 in Rasp Punch/Coarse 1.60 lb 6 

17910N 037103218001 Pouch 14 in Rasp Punch/Coarse 1.60 lb 6 

F I L E S 11 

Magicut® Plater's Special Horse Rasp 

■■American pattern plater's special Magicut horse rasp, tanged 

■■Maximum cutting surface design gives rapid removal and 

smoother finish 


■■Opposite side has the Nicholson® unique Magicut® file pattern 

■■These are narrow chip breakers created by steep and 

angled serrations 


■■Tooth design is cut deeper to last longer 

■■They cut much faster than conventional horse rasps 

■■Rasp cut is 6 teeth per row (other horse rasps have 

5 teeth per row) 


18130N 037103219534 Boxed 14 in Rasp/Magicut® 1.35 lb 6 

18153N 037103219480 Pouch 14 in Rasp/Magicut® 1.45 lb 6 

Horse Rasps - Tanged 

■■American pattern horse rasp, tanged 



■■Tanged 

■■Rasp teeth on 1 side, file teeth on opposite 

■■Thicker than Plater’s Special - ideal for hot rasping 




1022


Woodcraft Rasp - Half Rasp, Half File 

■■American pattern woodcraft rasp, half rasp, half file 

■■Ideal for use in woodworking plants 

■■Also by professional carpenters, hobbyists and DIY enthusiasts 

■■Half-round rasp side for rapid stock removal 

■■File cut side for smoothing purposes 

■■For use on wood, leather, soapstone and soft metals 

■■8"/200mm length is exclusive of handle 


18617N 037103219749 Boxed 8 in Rasp Punch/Wood 0.50 lb 6 

23859N 037103219879 Carded 8 in Bastard 0.60 lb 6 

■■American pattern wood rasp, flat bastard 

■■Used by woodworkers, hobbyists and plumbers 

■■For use on wood and soft metals 

■■Flat shape 

■■Bastard cut 

Wood Rasps - Flat Bastard 



Wood Rasps Round Bastard 

■■American pattern wood rasp, round, bastard cut 

■■Used for same purpose as regular wood rasps 

■■Used in places for which their shapes make them 

particularly effective 

■■Round shape 

■■Bastard cut 

■■Made from same size steel as round files 

11 


19846 037103198464 Boxed 8 in Bastard 0.15 lb 12 

19875 037103198754 Boxed 10 in Bastard 0.26 lb 12 

Wood Rasps - Half Round 

■■American pattern wood rasp, half round, bastard cut, red handle 

■■Used by woodworkers, hobbyists and plumbers 

■■Half-round shape 

■■Single cut file teeth on edge 

■■For use on wood and soft metals 

F I L E S 

Cat. No. UPC No. Packaging Length File Cut Handled Product Weight Shelf Pack Qty. 

19394N 037103219633 Boxed 8 in Bastard No 0.25 lb 12 

21878N 037103219718 Carded 8 in Bastard No 0.30 lb 6 




1023

S W I S S P A T T E R N 

Barrette Files 


Pattern Files 

■■Used By Tool and Die Makers, Jewelers, Model Makers, 

Home Craftsman 

■■Recommended for Those Who Do Superfine Precision Filing 

■■Double Cut, Wide Flat Sides 

■■Flat on 1 Side, Backs Are Beveled on Edges as Indicated 

by Cross Section 

■■Back and Beveled Edges Are Safe 

■■Included Angle is 33° 


35031N 037103241917 Boxed 4 in 0 0.05 lb 12 

35061N 037103241924 Boxed 6 in 0 0.10 lb 12 

35025N 037103241900 Boxed 4 in 00 0.05 lb 12 

35073N 037103241931 Boxed 6 in 2 0.10 lb 12 

F I L E S 11 

Barrette Files - Hot Die 

■■Xf® Files, Swiss Pattern Barrette File, Hot Die, Cut No. 00 


Pattern Files 

■■Used By Tool and Die Makers, Jewelers, Model Makers, 


■■Recommended for Those Who Do Superfine Precision Filing 

■■Double Cut, Wide Flat Sides 

■■Flat on 1 Side, Backs Are Beveled on Edges as Indicated 

by Cross Section 

■■Back and Beveled Edges Are Safe 

■■Included Angle is 33° 

■■Approximate Point Thickness is .040”/1.10mm 

■■Same As Regular Barrette Files Except with Thinner Point 


35108N 037103241948 Boxed 3 in 00 0.02 lb 12 

35114N 037103241955 Boxed 4 in 00 0.03 lb 12 

6-1/2" (163mm) Die Sinker's Rifflers 


Pattern Files 

■■Used By Tool and Die Makers, Jewelers, Model Makers and 


■■Made in Approximately 6-1/2"/165mm Length 

■■Made in Shales As Illustrated 

■■Each Riffler Identified By Number 

Cat. No. UPC No. Packaging Length File Cut Style Product Weight Shelf Pack Qty. 

35976 037103359766 Boxed 6-1/2 in 0 1 0.02 lb 12 

35982 037103359827 Boxed 6-1/2 in 2 1 0.02 lb 12 

36018N 037103360182 Boxed 6-1/2 in 2 5 0.02 lb 12 

36054 037103360540 Boxed 6-1/2 in 2 7 0.02 lb 12 

1024


Equaling Files 


Pattern Files 




■■Double-Cut on Sides, Single-Cut on Edges 

■■Parallel in Both Width and Thickness for Their Entire Length 


36219N 037103241962 Boxed 4 in 0 0.05 lb 12 

36227N 037103241979 Boxed 4 in 2 0.05 lb 12 

36253N 037103241986 Boxed 6 in 2 0.10 lb 12 

36281N 037103241993 Boxed 8 in 2 0.25 lb 12 



Pattern Files 



■■Double Cut on Both Flat and Half-Round Sides 

■■Taper in Thickness and Width to Point 

■■Half Round Shape 

■■Made in Much Finer Cuts, Which Vary From No. 00 (Coarsest) 

to No. 4 (Finest) 


36521N 037103242006 Boxed 6 in 0 0.10 lb 12 

36563N 037103242068 Boxed 8 in 0 0.20 lb 12 

36557N 037103242051 Boxed 8 in 00 0.20 lb 12 

36527N 037103242013 Boxed 6 in 1 0.10 lb 12 

36569N 037103242075 Boxed 8 in 1 0.20 lb 12 

36533N 037103242020 Boxed 6 in 2 0.10 lb 12 

36539N 037103242037 Boxed 6 in 3 0.10 lb 12 

36545N 037103242044 Boxed 6 in 4 0.10 lb 12 

11 

Needle Files Round Handle 

■■Hot Die - Barrette Shape Only 

■■Same as Regular Round Handle Needle Barrette Except with 

Thinner Points 


37752 037103377524 Boxed 5-1/2 in 0 Barrette 0.01 lb 12 


F I L E S 

1025


Needle Files 


Pattern Files 

■■Used Primarily By Jewelers, Die Makers, Watchmakers and 

Fine Toolmakers 


F I L E S 11 


37277 037103372772 Boxed 4 in 0 Barrette 0.01 lb 12 





37500 037103375001 Boxed 5-1/2 in 0 Crossing 0.01 lb 12 



37249 037103372499 Boxed 4 in 0 Equaling 0.01 lb 12 

37612 037103376121 Boxed 5-1/2 in 0 Equaling 0.01 lb 12 


37256 037103372567 Boxed 4 in 2 Equaling 0.01 lb 12 






37109 037103371096 Boxed 4 in 0 Flat 0.02 lb 12 

37472 037103374721 Boxed 5-1/2 in 0 Flat 0.01 lb 12 


37116 037103371164 Boxed 4 in 2 Flat 0.02 lb 12 





37081 037103370815 Boxed 4 in 0 Half Round 0.10 lb 12 

37444 037103374448 Boxed 5-1/2 in 0 Half Round 0.01 lb 12 


37088 037103370884 Boxed 4 in 2 Half Round 0.02 lb 12 






37165 037103371652 Boxed 4 in 0 Knife 0.01 lb 12 

37891 037103378910 Boxed 6-1/4 in 0 Knife 0.02 lb 12 

37172 037103371720 Boxed 4 in 2 Knife 0.01 lb 12 

37898 037103378989 Boxed 6-1/4 in 2 Knife 0.02 lb 12 

37053 037103370532 Boxed 4 in 0 Round 0.02 lb 12 

37416 037103374165 Boxed 5-1/2 in 0 Round 0.01 lb 12 


1026



37060 037103370600 Boxed 4 in 2 Round 0.02 lb 12 






38059 037103380593 Boxed 6-1/4 in 0 Slitting 0.02 lb 12 

37703 037103377036 Boxed 5-1/2 in 2 Slitting 0.02 lb 12 

37193 037103371935 Boxed 4 in 0 Square 0.01 lb 12 

37556 037103375568 Boxed 5-1/2 in 0 Square 0.01 lb 12 


37200 037103372000 Boxed 4 in 2 Square 0.01 lb 12 



37221 037103372215 Boxed 4 in 0 Three Square 0.01 lb 12 

37584 037103375841 Boxed 5-1/2 in 0 Three Square 0.01 lb 12 


37228 037103372284 Boxed 4 in 2 Three Square 0.01 lb 12 





Pillar Files 


Pattern Files 

■■Rectangular in Shape 

■■Double Cut on 2 Sides Only 


■■Tapered in Thickness 

■■Similar in Shape to Hand Files But Only 2/3 As Wide 


39861N 037103242099 Boxed 4 in 0 0.04 lb 12 

39899N 037103242136 Boxed 6 in 0 0.10 lb 12 

39935N 037103242181 Boxed 8 in 0 0.23 lb 12 

39971N 037103242211 Boxed 10 in 0 0.45 lb 6 

39855N 037103242082 Boxed 4 in 00 0.04 lb 12 

39893N 037103242129 Boxed 6 in 00 0.10 lb 12 

39929N 037103242174 Boxed 6 in 00 0.23 lb 12 

39965N 037103242204 Boxed 10 in 00 0.45 lb 6 

39992N 037103242228 Boxed 12 in 00 0.74 lb 6 

39905N 037103242143 Boxed 6 in 1 0.10 lb 12 

39873N 037103242105 Boxed 4 in 2 0.04 lb 12 

39911N 037103242150 Boxed 6 in 2 0.10 lb 12 

39947N 037103242198 Boxed 8 in 2 0.23 lb 12 

39881N 037103242112 Boxed 4 in 4 0.04 lb 12 

39923N 037103242167 Boxed 6 in 4 0.10 lb 12 

11 

F I L E S 

1027


Pillar Narrow Files 


Pattern Files 


■■Narrow 

■■Double Cut on 2 Sides Only 


■■Similar to Pillar Files But Are Narrower for Their Length 


40076N 037103242235 Boxed 6 in 0 0.08 lb 12 

40082N 037103242242 Boxed 6 in 1 0.08 lb 12 

40088N 037103242259 Boxed 6 in 2 0.08 lb 12 

Pillar Extra Narrow Files 


Pattern Files 

■■Cut on 2 Sides Only 


■■Similar to Pillar and Pillar Narrow Files But Are Narrower 

in Length 

F I L E S 11 


40248N 037103242280 Boxed 6 in 0 0.05 lb 12 

40287N 037103242327 Boxed 8 in 0 0.11 lb 12 

40242N 037103242273 Boxed 6 in 00 0.05 lb 12 

40281N 037103242310 Boxed 8 in 00 0.11 lb 12 

40254N 037103242297 Boxed 6 in 1 0.05 lb 12 

40222N 037103242266 Boxed 4 in 2 0.02 lb 12 

40260N 037103242303 Boxed 6 in 2 0.05 lb 12 

Pippin Files 

■■Xf® Files, Swiss Pattern Pippin File, Cut No. 2 


Pattern Files 

■■Rounded Back Tapers to Sharp Edge 

■■Also Taper to Point in Both Width and Thickness 

■■Sometimes Called "Apple Seed" Files 

Cat. No. UPC No. Packaging Length File Cut Shape Product Weight Shelf Pack Qty. 

40506 037103405067 Boxed 6 in 2 Apple Seed 0.08 lb 12 

1028


Round Files 


Pattern Files 

■■Round Shape 


■■Taper Throughout Length to Fine Point 

Cat. No. UPC No. Packaging Length Diameter File Cut Product Weight Shelf Pack Qty. 

40580N 037103242334 Boxed 4 in 1/8 in 0 0.01 lb 12 

40651N 037103242358 Boxed 6 in 3/16 in 0 0.04 lb 12 

40645N 037103242341 Boxed 6 in 3/16 in 00 0.04 lb 12 

40687N 037103242372 Boxed 8 in 1/4 in 00 0.08 lb 12 

40699N 037103242389 Boxed 8 in 1/4 in 1 0.08 lb 12 

40663N 037103242365 Boxed 6 in 3/16 in 2 0.04 lb 12 

40705N 037103242396 Boxed 8 in 1/4 in 2 0.08 lb 12 

40717N 037103242402 Boxed 8 in 1/4 in 4 0.08 lb 12 

7-1/2" (190mm) Silversmith's Rifflers 


Pattern Files 

■■Made in Approximately 7-1/8" (180mm) Lengths Only 

■■Ideal for Fine Work 

Cat. No. UPC No. Packaging Length File Cut Shape Product Weight Shelf Pack Qty. 

41018 037103410184 Boxed 7-1/2 in 2 3 0.07 lb 12 

41096 037103410962 Boxed 7-1/2 in 0 10 0.05 lb 12 

41102 037103411020 Boxed 7-1/2 in 2 10 0.06 lb 12 

11 

Warding Files 


Pattern Files 

■■Used By Locksmiths and Anywhere A Thin File is Required 

■■Thin Rectangular in Section with Thickness Approximately 

1/8 Their Width 

■■Taper Slightly to Point in Width 


41612N 037103243652 Boxed 6 in 0 0.10 lb 12 

41636N 037103243676 Boxed 8 in 0 0.15 lb 12 

41588NN 037103243645 Boxed 4 in 2 0.03 lb 12 

41618N 037103243669 Boxed 6 in 2 0.10 lb 12 

F I L E S 

1029

C U R V E D T O O T H F I L E S 

Flexible Files (Without Tang) 

■■Curved Tooth Pattern, Flexible Files (Without Tang) 

■■For Smooth, Rapid Work on Cast Iron, Bronze, Lead, 

Babbitt, Aluminum 

■■Also for Zinc, Plastics 

■■Any Steel Up to the Hardness of Annealed Tool Steel 


■■Curved Cut 

■■Pitch and Rake Designed to Avoid Pinning and to Provide 

Smoothest Finish 

Cat. No. UPC No. Packaging Length Teeth per inch File Cut Product Weight Shelf Pack Qty. 

20205N 037103219312 Boxed 14 in 12 Fine 0.75 lb 6 

20138N 037103219299 Boxed 12 in 10 Standard 0.50 lb 6 

Milled Tooth Bodifiles 

■■Curved Tooth Pattern, Flexible Milled Tooth Bodifile, 

Without Tang 









■■No. Teeth Per Inch: 8; Cut: 50-908 Standard 

F I L E S 11 


20189N 037103219404 Boxed 14 in 8 50-908 Standard 0.75 lb 6 

Flat Files - Rigid Type (With Tang) 

■■Curved Tooth Pattern, Flexible Rigid Type Flat Files (With Tang) 






■■Curved Cut, Rigid Type with Tang 



■■No. Teeth Per Inch: 14; Cut: Standard 


20239N 037103219411 Boxed 8 in 14 Curved Standard 0.25 lb 12 




1030


Flat Babbit Files 

■■Curved Tooth Pattern, Flexible Flat Babbit Files 







■■Exactly Like Flat Files in Shape, Dimension and Weight 

■■But Fewer Teeth Per Inch 




20479N 037103219381 Boxed 12 in 8 Curved 0.82 lb 6 


Flat Utility Files 

■■Curved Tooth Pattern, Flexible Flat Utility Files 




■■Any Steel Up to the Hardness of Commercial Tool Steel 


■■Standard-Cut Teeth on 1 Side, Smooth-Cut Teeth 

on the Opposite 



■■No. Teeth Per Inch: 10 and 16 


20547N 037103219374 Boxed 12 in 10 and 16 Standard/Smooth 0.80 lb 6 

11 


■■Curved Tooth Pattern, Flexible Half Round Files 




■■Any Steel Up to the Hardness of Commercial Tool Steel 

■■Half Round Shape 

■■Flat on 1 Side, Convex on Opposite 

■■Particularly Adapted for Bearings and Concave Surfaces 

■■No. Teeth Per Inch: 14; Cut: Standard 

F I L E S 


20582N 037103218599 Boxed 8 in 14 Standard 0.30 lb 12 

1031


Super Shear 

■■Curved Tooth Pattern, Super Shear Files 

■■A Double Purpose Milled Curved Tooth File 

■■Different and Exclusive with Nicholson® 

■■Rectangular Shape, Curved Cut 

■■Teeth Cut in An Off Center Arc to Permit Fast Cutting 

■■Wide Industrial Usage on Flat and Convex Surfaces 

■■Such As Aluminum, Brass, Babbitt, Bronze, Copper, Magnesium 

■■Iron, Annealed Steel, Soft Metal Alloys, Plastics, Hard 

Rubber, Hardwood 

■■Smooths As It Roughs 






Adjustable Flexible File Holder No. 25 

■■Can Be Used with Either 12" or 14" Files 

■■Easily Adjusted for Curving File Outward or Inward 

■■Adjustable Length 

F I L E S 11 


21272N 037103243409 Boxed 1.80 lb 1 

Machinist's Scrapers (Handled) 

■■Overall Length of These Tools Including Handle 

is Approximately 8" 

■■Three Square Shape is Supplied in Hollow Ground with 

60° Angle 

■■Comes with Handle 


21667N 037103219770 Boxed 3-1/4 in 0.13 lb 6 

File Cleaners 

■■Available in Two Styles: File Card or File Card/Brush 

■■File Card is for General Cleaning of File Teeth 

■■File Card/Brush is for use on Finer Cut Files 


21455 037103214553 Carded 8" File Cleaner 8 in 0.14 lb 6 

21458 037103214584 Boxed 

10" File and Rasp 

Cleaner 

10 in 0.30 lb 10 

21467 037103214676 Boxed 10" File Card and Brush 10 in 0.30 lb 6 

1032

A C C E S S O R I E S 

Hoof Sharpening Steel 

■■Specifically Designed to Sharpen Hoof Knives 

■■Sharpening Steel is Designed Specifically to Hone the Edge 

of Hoof Knives and Similar Tools 


10627N 037103243935 Carded 0.20 lb 6 

Ergonomic File Handle 

■■Interchangeable Cushion Inserts Designed to Fit Most Popular 

Files 

■■Rubber-Coated Ergonomic Shape for Better Comfort and 

Control 

■■Rear Taper, Wide Middle and Flared Neck Increases Push Force 

Cat. No. UPC No. Packaging Length Handle No. Product Weight Shelf Pack Qty. 

21474H 037103186232 Carded 4-1/2 in Ergonomic 0.15 lb 6 

Screw-on Handle - Plastic 

■■Screw-On Design Fits Most Popular Files 

■■For Professional or Home Handymen 

■■Handle Made of Strong High-Impact Material 

■■Contoured to Fit Hand for Straight, Lathe and Draw Filing 

■■Non-Slip Textured Finish for Easier Grip 


21484 037103214843 Carded 3-1/2 in PH1 0.10 lb 12 

21493 037103214935 Carded 3-3/4 in PH2 0.10 lb 12 

21502 037103215024 Carded 3-3/4 in PH3 0.10 lb 12 

21512 037103215123 Carded 4-1/8 in PH4 0.15 lb 12 

21513 037103215130 Carded 4-1/8 in PH5 0.13 lb 12 

21514 037103215147 Carded 4-3/4 in PH6 0.20 lb 12 

21515 037103215154 Carded 5 in PH7 0.20 lb 12 

21516 037103215161 Carded 5 in PH8 0.20 lb 12 

11 

SELECTION CHART 

Size 

File Type 4" 5" 6" 8" 10" 12" 14" 16" 

Mill PH3 - PH4 PH5 PH5 PH6 PH7 PH8 

Flat PH3 - PH4 PH5 PH5 PH6 PH7 PH8 

Hand PH3 - PH4 PH5 PH6 PH7 PH8 

Half Round PH3 - PH4 PH5 PH6 PH7 PH8 PH8 

Warding PH3 - PH4 PH4 PH5 - - - 

Knife PH3 - PH4 PH5 PH5 PH6 - - 

Size 

File Type 4" 5" 6" 8" 10" 12" 14" 16" 

Round PH1 PH2 PH3 PH4 PH4 PH5 PH7 PH7 

Square PH1 PH2 PH3 PH4 PH4 PH5 PH6 - 

Triangular PH1 PH2 PH3 PH4 PH5 PH6 PH7 - 

Cantsaw - - PH4 PH5 PH6 - - - 

Tanged Horse - - - - - PH8 PH8 - 

Platers Special - - - - - - PH8 - 

F I L E S 

1033


Metal Ferruled Wooden Handles 

■■Made From Close Grain Hardwood with Wax Finish 

■■Handles Have Strong Nickel-Plated Metal Ferrules 


21511N 037103221292 Boxed 3-3/4 in 4 0.05 lb 12 

21520N 037103221308 Carded 3-3/4 in 4 0.10 lb 6 

21494N 037103221278 Boxed 4-1/2 in 2 0.10 lb 12 

21524N 037103221322 Carded 4-1/2 in 2 0.12 lb 6 

21528N 037103221537 Carded 4-1/4 in 0 0.20 lb 6 

21503N 037103221285 Boxed 4-1/8 in 3 0.08 lb 12 

21522N 037103221315 Carded 4-1/8 in 3 0.09 lb 6 

21485N 037103221261 Boxed 4-7/8 in 1 0.11 lb 12 

21526N 037103221339 Carded 4-7/8 in 1 0.30 lb 6 

21476N 037103221254 Boxed 5-1/4 in 0 0.10 lb 12 

21470N 037103221346 Boxed 5-3/4 in 000 0.20 lb 12 

21471N 037103221247 Boxed 5-3/4 in 00 0.19 lb 12 

TG4N 037103227232 Boxed 5 in RASP 0.15 lb 12 

F I L E S 11 

SELECTION CHART 

Size 

Size 

File Type 4" 5" 6" 7" 8" 9" 10" 12" 14" File Type 4" 5" 6" 7" 8" 9" 10" 12" 14" 

Taper 4 3 3 3 2 1 1 - - Warding 3 - 2 - 2 - 1 - - 

Slim 4 4 4 4 3 - 2 - - Knife 3 - 2 - 1 - 1 0 - 

X Slim 4 4 4 4 4 - - - - Round 4 - 3 - 2 - 3 1 0 

XX Slim - 4 4 4 4 - - - - Square 4 - 4 - 3 - 2 1 0 

Mill 3 - 2 - 1 - 0 0 00 Cantsaw - - 2 - 1 - 1 - - 

Flat 3 - 2 - 1 - 0 0 00 Crosscut - - - - 1 - 0 - - 

Hand 3 - 2 - 1 - 1 0 - Tanged Horse - - - - - - - 000 000 

Half Round 3 - 2 - 1 - 0 00 000 Platers Special - - - - - - - - 000 

Item Size: 8 x 3/16" 8 x 7/32" 8 x 1/4" 8 x 5/16" 8 x 3/8" 

Chainsaw 4 4 4 4 3 

Carded File Handle - Plastic 

■■Interchangeable Cushion Inserts Designed to Fit Most Popular 

Files 

■■Handle Made of Strong High-Impact Material 

■■Contoured to Fit Hand for Straight, Lathe and Draw Filing 

■■Non-Slip Textured Finish for Easier Grip 

■■4 Inserts 


21474 037103214744 Carded 4 in #5 0.15 lb 6 

1034

F I L E S 

■■Set Comprised of the 4 Most Common File Shapes 

■■Ergonomic Dual Material Handle 

4 Pc. Standard Bastard File Set 


82820 099575828201 Tray 2.22 lb 1 


82822D 8" Flat Bastard File 82824 8" Half Round Bastard File 

82823 8" Round Bastard File 82825 8" Triangle Bastard File 

■■4" Mini Files in an Assortment of Shapes 


6 Pc. Mini Bastard File Set 

11 

Cat. No. UPC No. Packaging Handled Product Weight Shelf Pack Qty. 

82821 099575828218 Pouch Ergonomic 0.79 lb 1 


- 4" Flat Mini File - 4" Round Mini File 

- 4" Half Round Mini File - 4" Square Mini File 

- 4" Knife Mini File - 4" Triangle Mini File 

■■Efficient File for Removing Flash and Other Particles 


Flat Bastard File 

F I L E S 


82822D 099575828225 Bagged 8 in Ergonomic Bastard 0.46 lb 1 

1035

F I L E S 

■■For Enlarging Curved or Round Openings 


Round Bastard File 


82823 099575828232 Bagged 8 in Ergonomic Bastard 0.30 lb 1 

■■Provides Spiral Cut for Smooth Finish 

■■Curved on One Side and Flat on the Other 


Half Round Bastard File 



■■Used for Cutting and Cleaning Corners 


Triangle Bastard File 

F I L E S 11 



1036

M E A S U R I N G A N D I N S P E C T I O N 

Short Tapes........................................ 1042 

Pocket Tapes..................................... 1046 

Long Tapes......................................... 1049 

Fiberglass Tapes............................... 1053 

Oil Gauging Tapes............................. 1057 

Surveying/Engineering Tapes........... 1061 

Reels and Frames.............................. 1064 

Folding Rules..................................... 1066 

Measuring Rules................................ 1069 

Measuring Wheels............................. 1070 

Feeler Gauges.................................... 1071 

Spark Plug Gap Gauges..................... 1073 

Calipers.............................................. 1074 

12 

Automotive Inspection Tools............ 1076 

Feeler Gauges.................................... 1078 

Automotive Inspection Tools............. 1080 

M E A S U R I N G P R O D U C T S 

1037


Measuring 

Ever since the first Lufkin ® wood rule was produced in 1869, the Lufkin brand has been synonymous with high quality and 

unmatched accuracy. Today, Lufkin wood rules, power tapes, engineering and surveying tapes, specialty tapes and measuring 

wheels comprise one of the widest selections of measuring products available from any manufacturer. 

For over a century, Lufkin ® tapes have been recognized as the standard for accuracy and high quality. Lufkin ® steel tapes are 

manufactured to government standards traceable to the U.S. Department of Commerce, National Institute of Standards and 

Technology. Periodically, these standards are recalibrated with renewed certification by the N.I.S.T. 

POWER 

TAPES 

Exclusive toggle blade-lock for 

positive, easy blade control 

Task specific markings 

for higher productivity 

Also available 

in full chrome 

English Feet/Inches 

Case designed 

to fit the hand 

Quick Read 

Non-slip rubber 

full overmold grip 

Engineers Feet/Decimal 

Full-length clearcoat exceeds ASTM 

abrasion-resistance standards for more 

durable markings 

Metric/Centimeter 

9-foot standout on 1-inch 

blade width models 

Decimal/Metric 

M E A S U R I N G P R O D U C T S 12 

Durable ABS Hi-Viz ® orange case with 

radial ribs for added strength 

OIL GAUGING 

TAPES 

Solid one piece design increases 


Patented Quad-Hook ® 

long-life end hook on 1-inch 

blade-width models 

New ergonomic handle allows for a 

stronger, more comfortable grip and 

better balance 

English Metric/Centimeter 

English Metric/Millimeter 

Line Wiper Ready: Front portion of new handle 

has an adjusted diameter and longer attachment 

bolt to fit perfectly with popular tape wipers 

New turn knob provides 

more surface area for a more 

secure grip and helps lessen 

hand fatigue 

1038


Measuring 

GearWrench ® offers the most popular ranges in both feeler and gap gauges as well as Automotive focused calipers. Tools are made 

of the highest quality materials for a long life of precision measurement. 

FEELER 

GAUGES 

Includes one 0.010 brass blade 

for electronic ignition use 

Measures clearances 

from 0.0015 to 0.035" 

(0.038 to 0.889mm) 

Blade dimensions 

are 3-5/16" x 1/2" 

DIGITAL 

GAUGES 

Stainless steel 

frame with 

hardened jaws 

4 way measurement, inside, 

outside, depth and step 

Metric/Inch system interchange 

at any position 

12 

LCD displays up to 5 digits 

under large glass window 

Resolution/repeatability 

0.0005" x 0.01mm 

Zero setting 


Data output 

interface 

Zero setting 


Color coded Off, 

On/Zero and 

Inch/mm 

Graduated 

scale and 

thumb roll 

0"-6"scale 

Resolution/repeatability 

0.001" x 0.01mm 


1039

S H O R T T A P E S 

How to Change Short Tape Blades 

1. Pull old blade out past end until about 2” of bluish metal spring is exposed. Put a nail 

in round hole( A) in spring to hold it. 

2. Note how old blade is attached, then remove it. 

3. New blade is reverse wound, ready to attach to spring. With blade graduations up, turn 

spring sideways and insert from bottom into slot (B) in new blade. Twist spring and pull 

back until notches (C) lock at rear of slot (B). 

4. Remove nail and return blade to case. 

Short Tape Blade Styles 

A1 yellow clad 



• 1/2" width only 

• Black and red markings one side only 

• Graduated feet and inches to 1/16ths top edge 

• Graduated inches to 1/16ths bottom edge, first 12 inches 

to 1/32nds 

• Instantaneous foot readings 

• Stud marks every 16" 



• Graduated feet and inches to 1/16ths top edge 

• Graduated inches to 1/16ths bottom edge, first 12" 

to 1/32nds 



• 3/4" and 1" widths 

• Graduated feet and inches to 1/16ths top and 

bottom edge 

• Vertical numbering 

• Fractional and decimal equivalent marking 



A5 yellow clad A6 Chrome clad ® 


• 3/4" and 1" widths 

• Graduated feet, 1/10ths and 1/100ths top edge; feet, 

inches and 1/16ths on bottom edge 


• NOTE: 1" width has red and black markings; 3/4" has 

black markings only 



• Black markings one side only 

• Graduated to 1/10ths of inches on both edges 

• First 6" on bottom edge graduated to 1/50ths 

• 1-3/16" and 1" widths 


• Consecutive inches to 16ths 


• Truss marks every 19.2" 



• Chrome Clad® blade 


• Graduated consecutive inches and 1/16ths on top and 

bottom edges 




• Graduated to 1/10ths of inches on both edges 

A7 yellow clad A8 CHROME clad ® A9 YELLOW clad 

• Available in 13mm, 19mm and 25mm widths 


• Both edges graduated to millimeters; numbered 

consecutive centimeters with larger red numbers 

at each decimeter 

1040

S H O R T T A P E S 




• 1/2"/13mm width only 


• Top edge graduated and numbered inches 

• Bottom edge to millimeters, numbered consecutive 

millimeters with red number at each decimeter 

• 3/4"/19mm width 


• Top edge graduated and numbered inches (no stud 

centers); bottom edge graduated in millimeters, 

numbered consecutive millimeters with red number 


• Stud marks every 16" and 40cm 

• 1/2"/13mm and 3/4"/19mm widths 


• Top edge to 1/16ths, continuous inches; feet and 

decimeters marked in red 

• Bottom edge graduated to millimeters, numbered 

consecutive centimeters 






• Consecutive inches to 1/16ths bottom edge, first 12” 

to 1/32nds 

• Stud marks every 16” and 40cm 



• Top edge graduated in inches to 1/16ths 

• Bottom edge graduated in millimeters, numbered 

in centimeters; 1 to 9 in each decimeter 


• Black markings both sides 

• Consecutive inches to 1/16ths, first 12" to 1/32nds 

on side 1 

• Diameter inches to 1/64ths side 2; blank space ahead 

of zero 





• Markings both sides 

• Consecutive inches to 1/16ths, first 12” to 1/32nds 

on side 1 

• Diameter inches to 1/100ths side 2; blank space ahead 

of zero 

• 6mm width only 


• Consecutive centimeters to millimeters on side 1 

• Diameter to millimeters side 2, numbered in centimeters 


• Black markings both sides 

• One side marked 1/4th scale (1 to 240), other side has 

1/8th scale (1 - 480) 

12 




• 3/4"/19mm and 1"/25mm widths 


• Graduated millimeters on top edge and feet 

• 1/10ths and 1/100ths on bottom edge 


• 1" width only 


• Graduated in feet, 1/10ths and 1/100ths of feet, 

numbered in feet and 10ths of feet 

• 1"/25mm width only 

• Markings one side only 

• English top edge to 1/16ths, first 12" to 1/32nds, 

(continuous inches plus consecutive inch marks within 

each foot from 1' mark). Truss marks every 19.2" 

• Metric bottom edge graduated to millimeters, numbered 

consecutive centimeters 




• Top edge numbered every 10 millimeters with red print 

for every 100cm increment and graduations every 

millimeter. Bottom edge numbered in consecutive inches 

graduated in 1/10ths of an inch with first 12" graduated 

to 1/50ths and numbered in 10ths 


• Black and red markings on one side only 

• Graduated to 1/16ths on top edge graduated in 1/32nds 

• 1/10ths on bottom edge; first 6 inches graduated 

in 1/50ths 


• 1" width only 


• Top edge graduated to 1/16ths, and numbered in 

consecutive inches and fractional equivalents to 1/8ths. 

• Bottom edge with red print numbered at the mid-point 

of the measurement on the top edge 


1041

P O W E R R E T U R N T A P E S 

Series P1000 

■■Hi-Viz® Orange Case - Easy to Find on the Job 

■■Rubber Cushion Case Exterior Protects Tape From Impact and 

Improves Grip 

■■Fits Easily Into Most Tape Holsters 

■■Bright Yellow Blade Has Clear Easy-To-Read Numerals 

■■Toggle Lock is Positioned for Convenient Operation 

■■Holds the Blade Securely in Any Position 

■■Cushioned Blade Return 


Cat. No. UPC No. Packaging Case Color Blade Width Blade Length Blade Style 

Replacement 

Blade Cat No. 

PHV1433 037103252081 Carded Hi-Viz® Orange 1 in 33 ft A5 None 1.34 lb 6 

PHV1433DM 037103252098 Carded Hi-Viz® Orange 25 mm, 1 in 10 m, 33 ft A29 None 1.34 lb 6 

PHV1410CME 037103252074 Carded Hi-Viz® Orange 25 mm, 1 in 10 m, 33 ft A30 None 1.34 lb 6 

PHV1425 037103252005 Carded Hi-Viz® Orange 1 in 25 ft A5 None 1.07 lb 6 

PHV1425D 037103252012 Carded Hi-Viz® Orange 1 in 25 ft A4 None 1.07 lb 6 

PHV1425ED 037103252029 Carded Hi-Viz® Orange 1 in 25 ft A35 None 1.07 lb 6 

PHV1048CM 037103251978 Carded Hi-Viz® Orange 25 mm 8 m A9 None 1.07 lb 6 

PHV1048CME 037103251985 Carded Hi-Viz® Orange 25 mm, 1 in 8 m, 26 ft A30 None 1.07 lb 6 

PHV1048DM 037103251992 Carded Hi-Viz® Orange 1 in 25 ft A29 None 1.07 lb 6 

PHV1316 037103251930 Carded Hi-Viz® Orange 3/4 in 16 ft A2 RW316 0.62 lb 6 


PHV1035CME 037103251923 Carded Hi-Viz® Orange 

19 mm, 

3/4 in 

Product 

Weight 

Shelf Pack 

Qty. 

5 m, 16 ft A13 RY35CME 0.62 lb 6 

PHV1312 037103251848 Carded Hi-Viz® Orange 3/4 in 12 ft A2 R1312 0.60 lb 6 

PHV1312D 037103251855 Carded Hi-Viz® Orange 3/4 in 12 ft A4 None 0.60 lb 6 


PHV1034DM 037103251831 Carded Hi-Viz® Orange 

19 mm, 

3/4 in 

19 mm, 

3/4 in 

4 m, 13 ft A13 None 0.60 lb 6 

3.7 m, 12 ft A29 None 0.60 lb 6 

PHV1012 037103251770 Carded Hi-Viz® Orange 1/2 in 12 ft A1 RY212 0.32 lb 6 


13 mm, 

1/2 in 

4 m, 13 ft A13 None 0.32 lb 6 

PHV1010 037103251701 Carded Hi-Viz® Orange 1/2 in 10 ft A1 RY210 0.29 lb 6 



13 mm, 

1/2 in 

3 m, 10 ft A13 RY23CME 0.29 lb 6 

1042


Series P2000 

■■Case Designed to Fit Perfectly in the Hand 

■■Lightweight, High Strength Chrome Finished Case 

■■Fits Easily Into Most Tape Holsters 

■■Bright Yellow Blade Has Clear Easy-To-Read Numerals 

■■Toggle Lock Positioned for Convenient Operation, Holds Blade 

Securely 

■■Cushioned Blade Return 

■■Removable Belt Clip 


Replacement 

Blade Cat No. 

P2133 037103252067 Carded Chrome 1 in 33 ft A5 None 1.72 lb 6 

P2133D 037103252043 Carded Chrome 1 in 33 ft A4 None 1.72 lb 6 

P2410CME 037103252050 Carded Chrome 25 mm, 1 in 10 m, 33 ft A30 None 1.72 lb 6 

P2125 037103251954 Carded Chrome 1 in 25 ft A5 None 1.07 lb 6 

P2048CME 037103251961 Carded Chrome 25 mm, 1 in 8 m, 26 ft A30 None 1.07 lb 6 

P2316 037103251909 Carded Chrome 3/4 in 16 ft A2 RW316 0.62 lb 6 

P2335ME 037103251893 Carded Chrome 19 mm, 3/4 in 5 m, 16 ft A12 RY35ME 0.62 lb 6 

P2035CM 037103251879 Carded Chrome 19 mm 5 m A9 None 0.60 lb 6 

P2035CME 037103251886 Carded Chrome 19 mm, 3/4 in 5 m, 16 ft A13 RY35CME 0.60 lb 6 

P2312 037103251817 Carded Chrome 3/4 in 12 ft A2 R2312 0.60 lb 6 

P2312D 037103251800 Carded Chrome 3/4 in 12 ft A4 None 0.60 lb 6 

P2034CME 037103251794 Carded Chrome 19 mm, 3/4 in 4 m, 13 ft A13 None 0.60 lb 6 

P2212 037103251763 Carded Chrome 1/2 in 12 ft A1 RY212 0.32 lb 6 

P2212X 037103251756 Carded Chrome 1/2 in 12 ft A7 None 0.32 lb 6 

P2212DX 037103251749 Carded Chrome 1/2 in 12 ft A31 None 0.32 lb 6 

P2024CME 037103251732 Carded Chrome 13 mm, 1/2 in 4 m, 13 ft A13 None 0.32 lb 6 

P2210 037103251695 Carded Chrome 1/2 in 10 ft A1 RY210 0.29 lb 6 

P2210MEX 037103251671 Carded Chrome 13 mm, 1/2 in 3 m, 10 ft A36 None 0.29 lb 6 

P2223CME 037103251688 Carded Chrome 13 mm, 1/2 in 3 m, 10 ft A13 RY23CME 0.29 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 

12 

Quickread® Power Tapes 

■■Graduations Printed in Fractions and Decimal Equivalents 

■■Rubber Cushion Case Exterior Protects Tape From Impact and 

Improves Grip 

■■Positive Toggle Lock Holds Blade Securely at Any Length 

■■Self-Compensating End Hook for Inside and Outside 

Measurements 

■■Durable ABS Case Withstands Rugged Use on the Job Site 

■■Built in Bumper Reduces Shock When Blade is Retracted 

■■Blade Style: A3 

Cat. No. UPC No. Packaging Case Color 

Blade 

Width 

Blade 

Length 

Blade 

Style 

Replacement 

Blade Cat No. 

PQR1312 037103251862 Carded Hi-Viz® Orange 3/4 in 12 ft A3 None 0.60 lb 6 

PQR1316 037103251947 Carded Hi-Viz® Orange 3/4 in 16 ft A3 None 0.62 lb 6 

PQR1425* 037103252036 Carded Hi-Viz® Orange 1 in 25 ft A3 None 1.07 lb 6 

* Patented End Hook Lasts 10 Times Longer Than Ordinary End Hooks 

Product 

Weight 

Shelf Pack 

Qty. 


1043


Power Return 

■■Positive Toggle Lock Holds Blade Securely at Any Length 

■■Chrome or Easy-To-Find Hi-Viz® Orange Case Finish Available 

■■Self-Compensating End Hook for Inside and Outside 

Measurements 

■■Patented Quad Hook Extends Blade Life By Reducing Blade 

Breakage 

■■Built in Bumper Reduces Shock Upon Blade Retraction, Extends 

Tape Life 


■■All Shelf Pack Power Tapes Are Carded 


Replacement 

Blade Cat No. 

HV420 037103104168 Carded Orange 1 in 20 ft A5 None 0.72 lb 6 

Y420 037103104113 Carded Chrome 1 in 20 ft A5 None 0.70 lb 6 

Y46CME 037103001047 Carded Chrome 25 mm, 1 in 6 m, 20 ft A30 None 0.80 lb 6 

HV116 037103039149 Carded Orange 1 in 16 ft A5 None 0.70 lb 6 

Product 

Weight 

Shelf Pack 

Qty. 


800 Series Xtra-Wide Power Tape 

■■New Blade Design Achieves 10' Stand-Out, Make Longer 

Measurements 

■■Soft Touch Lock Button for Better Feel and Control 

■■Rubber Cushion Absorbs Impact and Improved Grip 

■■Case Designed to Fit Your Hand 

■■Clearcoat Blade Protection - More Durable Markings 

■■4-Rivet Reinforced End Hook - Increased Strength for Long 

Blade Life 

■■Non-Slip Slide Lock for Positive Blade Locking 

■■Easy On/Off Belt Clip for Fast Attachment to Belt 


Replacement 

Blade Cat No. 

XL8525 037103222923 Carded Orange 1-3/16 in 25 ft A5 None 1.25 lb 4 

XL8525D 037103223999 Carded Orange 1-3/16 in 25 ft A4 None 1.03 lb 4 

XL8548CME 037103225856 Carded Orange 30 mm, 1-3/16 in 8 m, 26 ft A30 None 1.03 lb 4 

800 Series Xtra-Wide Control Power Tape 

■■Drag Strip Finger Access for Measuring and Retraction Control 

■■Wide End-Hook Holds Better and Makes Marking Easier 

■■New Blade Design Achieves 10' Stand-Out, Make Longer 

Measurements 

■■Clearcoat Blade Protection - More Durable Markings 

■■Durable Case Allows for Added Control and Grip 

■■Integrated D-ring for Tether Strap or Easy Handing Storage 

■■Easy On/Off Belt Clip for Fast Attachment to Belt 


Replacement 

Blade Cat No. 

CS8516 037103263537 Carded Orange 1-3/16 in 16 ft A5 None 0.55 lb 6 

CS8525 037103263544 Carded Orange 1-3/16 in 25 ft A5 None 1.22 lb 4 

CS8525CME 037103263551 Carded Orange 30 mm, 1-3/16 in 8 m, 26 ft A30 None 1.24 lb 4 

Product 

Weight 

Product 

Weight 

Shelf Pack 

Qty. 

Shelf Pack 

Qty. 

1044


700 Series Auto-Lock 

■■Automatic Blade Lock Holds the Blade in Extended Position 

■■Recessed Lock Release to Reduce Chance of Accidental 

Retraction 

■■Non-Slip Co-Molded Rubber Grip 

■■Durable Clearcoat Blade Protection for Longer Blade Life 

■■Steel Reinforced End Hook for Longer Service Life 

■■Tough ABS Case to Stand Up to the Toughest Work Site 


Replacement 

Blade Cat No. 

AL725 037103214539 Carded Orange 1 in 25 ft A5 None 0.80 lb 8 

AL748CME 037103214546 Carded Orange 25 mm, 1 in 8 m, 26 ft A5 None 0.80 lb 8 

Product 

Weight 

Shelf Pack 

Qty. 

700 Series Magnetic End Hook 

■■Magnetic End Hook is a Time-Saver for Framers, HVAC 

Installers, and More 

■■Use for One-Man Measurements of Steel Framing and Drop 

Ceiling Grids 

■■Powerful Dual Magnets Can Also Serve As A Pick-Up Tool 


■■Durable ABS Case Stands Up to the Toughest Work Site 

■■Non-Slip Rubber Blade Lock Button 


Replacement 

Blade Cat No. 

L725MAG 037103214560 Carded Orange 1 in 25 ft A5 None 0.80 lb 8 

L748MAG 037103214522 Carded Orange 25 mm, 1 in 8 m, 26 ft A13 None 0.80 lb 8 

Product 

Weight 

Shelf Pack 

Qty. 

12 

700 Series Auto-Lock, Magnetic End Hook 

■■Automatic Blade Lock Holds the Blade in Extended Position 

■■Recessed Lock Release to Reduce Chance of Accidental 

Retraction 

■■Magnetic End Hook is a Time-Saver for Framers, HVAC 

Installers, and More 

■■Use for One-Man Measurements of Steel Framing and Drop 

Ceiling Grids 

■■Powerful Dual Magnets Can Also Serve As A Pick-Up Tool 


■■Durable Clearcoat Blade Protection for Longer Blade Life 

■■Steel Reinforced End Hook for Longer Service Life 

■■Tough ABS Case to Stand Up to the Toughest Work Site 


Replacement 

Blade Cat No. 

AL725MAG 037103215666 Carded Orange 1 in 25 ft A5 None 0.88 lb 4 

Product 

Weight 

Shelf Pack 

Qty. 


1045


L600 Series Power Return Tapes 

■■Lightweight, High Strength, Case Fits Comfortably in Hand 

■■Hi-Viz® Blue Case - Easy to Find on the Job 

■■Unique Slide Lock Design Allows for Easy Control of Tape Blade 

■■Wide Base Helps Keep Tape Standing Upright 

■■Clear Coat Blade Protection for More Durable Markings 

■■Easy-To-Read Yellow Clad Blade (Not Replaceable) 

■■Fits Easily in Most Tape Holsters 


Replacement 

Blade Cat No. 

L610 037103241061 Carded Orange 1/2 in 10 ft A1 None 0.25 lb 6 

L610CME 037103241078 Carded Orange 13 mm, 1/2 in 3 m, 10 ft A13 None 0.25 lb 6 

L616 037103241085 Carded Orange 3/4 in 16 ft A2 None 0.45 lb 6 

L616CME 037103241092 Carded Orange 19 mm, 3/4 in 5 m, 16 ft A13 None 0.45 lb 6 

L625 037103241108 Carded Orange 1 in 25 ft A5 None 0.80 lb 8 

L625CME 037103241115 Carded Orange 25 mm, 1 in 8 m, 26 ft A13 None 0.80 lb 8 

L625SCTMP 037103241122 Carded Orange 1 in 25 ft A37 None 0.80 lb 8 

QRL625MP 037103241139 Carded Blue 1 in 25 ft A3 None 0.80 lb 8 

Product 

Weight 

Shelf Pack 

Qty. 

■■Chrome Plated Case 

■■Yellow Clad Blade 

■■Power Retraction Operation 

■■Belt Clip 

Mezurall 


Cat. No. UPC No. Packaging Blade Width Blade Length Blade Style 

Replacement 

Blade Cat No. Product Weight Shelf Pack Qty. 

W928 037103458728 Carded 1/2 in 8 ft A1 None 0.20 lb 6 

W9210 037103458735 Carded 1/2 in 10 ft A1 RY210 0.30 lb 6 

Y8210 037103457967 Carded 1/2 in 10 ft A1 None 0.20 lb 6 

W9212 037103458742 Carded 1/2 in 12 ft A1 RY212 0.26 lb 6 

W9312 037103458780 Carded 3/4 in 12 ft A2 RW312 0.40 lb 6 

W9312D 037103458797 Carded 3/4 in 12 ft A4 None 0.38 lb 6 

W9210ME 037103458766 Carded 13 mm, 1/2 in 3 m, 10 ft A11 None 0.24 lb 6 

Y8212 037103457981 Carded 1/2 in 12 ft A1 RY212 0.24 lb 6 

■■1/2" X 12' Chrome Clad® Blade 

■■Ideal for Industrial Use 

■■Chrome Plated Case 

■■Hard Chrome Plated Blade is Tough and Accurate 


Mezurall Chrome Clad® 


Replacement 


C9212X 037103455574 Carded 1/2 in 12 ft A6 None 0.30 lb 6 

C9212 037103455567 Carded 1/2 in 12 ft A8 None 0.30 lb 6 

1046

P O C K E T T A P E S 

Pee Wee 

■■Pocket Size Ideal for Office or Home 

■■High Strength Case 


■■1/4"/6mm Wide Blade is Flexible; Bold Graduations on Yellow 

Background 



Replacement 


Y613ME 037103104106 Carded 6 mm, 1/4 in 3 m, 10 ft A17 None 0.11 lb 6 



W616BO 037103028624 Carded 1/4 in 6 ft A16 None 0.00 lb 6 

■■Convenient for Office, Briefcase, or Pocket 

■■6' Easy-To-Read Blade 

■■Power Retraction 

Executive® ThinLine 


Replacement 


W606 037103458551 Boxed 1/4 in 6 ft A16 None 0.09 lb 6 

W606ME 037103458520 Boxed 6 mm, 1/4 in 2 m, 6 ft A17 None 0.09 lb 6 


Executive® Diameter 

■■Designed for Measuring Diameters of Pipe, Cable, Tire, etc. 

■■Polished Chrome Case 

■■Zero Falls in the Same Place on Each Side of the Blade 

■■Conversion From Diameter to Circumference, Simply Turn the 

Blade 

■■Easy-To-Read Bold Graduations on Yellow Background 

■■Spring Action Returns Blade to Case 


Replacement 


W606P 037103458506 Boxed 1/4 in 6 ft A18 None 0.09 lb 6 

W606PD 037103458513 Boxed 1/4 in 6 ft A19 RW06PD 0.08 lb 6 

W606PM 037103458537 Boxed 6 mm 2 m A20 None 0.09 lb 6 

Architect's Pocket Scale 


■■1/4"/6mm Yellow Steel Blade Has Jet Black Markings 

■■Automatic Blade Return 

■■Blade Style: A21 

12 



Replacement 



1047

L O N G B L A D E S 

Long Tape Blade Styles 


B1 yellow clad 

B3 CHROME CLAD ® AND NUBIAN ® 


• Yellow clad blade 


• Graduated feet and inches to 1/8ths with instantaneous 

readings; 16” centers indicated by a diamond 




• Graduated feet and inches to 1/16ths with 

instantaneous readings 


• Chrome Clad® and Nubian® blade 


• Graduated consecutive inches to 1/16ths 

B4 CHROME CLAD ® 

B5 CHROME CLAD ® AND 

B7 CHROME CLAD ® AND 

YELLOW CLAD 

NICKEL CLAD ® 




• Graduated consecutive inches to 1/10ths 


• Chrome Clad® and yellow clad blade 


• Graduations feet to 1/10ths and 1/100ths 


• Chrome Clad®, nickel clad and yellow clad blade 


• Graduated feet and inches to 1/8ths with instantaneous 

readings; 16" centers indicated by diamond 

B8 YELLOW CLAD 

B9 YELLOW CLAD 

BY INCHES AND TENTHS OF INCHES 

2 






• Nubian® and Chrome Clad® blade 

• Black and red markings both sides 



• One side graduated feet and inches to 1/8ths with 

• Bottom side graduated millimeters, numbered 

• One side graduated 1/10ths and 1/100ths of feet; 

instantaneous readings; other side graduated in 

in centimeters and meters 

other side diameter feet and 1/10ths of inches 

consecutive millimeters with instantaneous meter 

• Top side graduated feet and inches to 1/8ths with 

numbers at every 100mm 

instantaneous readings; 16" centers indicated 

by a diamond 

B11 NUBIAN ® 

B12 NUBIAN ® 

B14 YELLOW CLAD AND 

CHROME CLAD ® 

0m 

20ϒC 50N 


• Nubian® blade 





1 9 

• 3/8" width 

• Graduated feet, inches and 1/8ths one side; other side • Graduated consecutive inches to 1/16ths one side; other • Yellow clad and Chrome Clad® blade 

graduated diameter feet and inches with an extra 

side to diameter inches, with an extra diameter inch • Black and red markings both sides 

diameter inch subdivided to 64ths left hand 

subdivided to 64ths left hand 

• Front side graduated in feet and inches to 1/8ths; back 

side in meters and millimeters numbered in centimeters 

8 0 

0 

0, 2 

9 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 

10 

2 0 3 0 

B2 CHROME CLAD ® 

B10 CHROME CLAD ® AND NUBIAN ® 

9 2 

1 8 

2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 

1048 

• 10mm width 

• Yellow clad and Chrome Clad® blade 

• Marked both sides 

• One side meters, decimeters and millimeters; other side 

reads diameter from circumference to 2m of diameter 

in millimeters


Anchor® 

■■Rugged, Vinyl-Covered Steel Case 

■■Chrome Clad® Blade 

■■Large Easy-Action Winding Drum and Friction Washers 

■■Nylon Roller Guides the Tape Smoothly in and Out of Case 


Replacement 


C213 037103451408 Boxed 3/8 in 50 ft B7 None 1.00 lb 1 

C213C 037103451514 Boxed 3/8 in 600 in B3 None 0.93 lb 1 

C213CX 037103451538 Boxed 3/8 in 600 in B4 None 1.00 lb 1 

C213D 037103451552 Boxed 3/8 in 50 ft B5 OC213D 0.90 lb 1 

C216 037103451606 Boxed 3/8 in 100 ft B7 None 1.70 lb 1 

C21616THBLK 037103451675 Boxed 3/8 in 100 ft B2 None 1.60 lb 1 

C216D 037103451699 Boxed 3/8 in 100 ft B5 None 1.55 lb 1 

Leader® 

■■Sturdy, Rust-Resistant Steel Case Has A Tough, Black Vinyl 

Cover 


■■Jet-Black Markings Are Bonded to the Steel 

■■Recessed Below the Hard Chrome Surface; Highly Resistant to 

Wear 

■■Large Easy Action Winding Drum and Friction Washers 

■■Nylon Roller Guides the Tape Smoothly in and Out of Case 

■■Folding End Hook Ring 


Replacement 


HC253 037103452016 Boxed 3/8 in 50 ft B7 None 1.00 lb 1 

HC256 037103452061 Boxed 3/8 in 100 ft B7 None 1.70 lb 1 

Challenge 

■■Challenge(Tm); Nubian® Case, Drum Assembly 

■■Etched Tape Line is Designed to Perform for Years 

■■Vinyl Covered Steel Case 


■■Easy Action Winding Drum and Friction Washers 

■■Nylon Rollers Guide the Tape Smoothly in and Out of Case 

■■P in the Suffix of the Number Denotes Diameter 


Replacement 


261PTH 037103451309 Boxed 3/8 in 33 ft B11 O261PTH 0.70 lb 1 

263P 037103452092 Boxed 3/8 in 50 ft B11 None 0.80 lb 1 

12 


1049


Hi-Viz® Speedwinder® 

■■Impact-Resistant, Attractive, Self-Standing Case 

■■Heavy Duty Yellow Clad Blade Protected By An Abrasion 

Resistant Coating 

■■Extends, Rewinds in Less Time Than Conventional Long Steel 

Tapes 

■■Easy-To-Read Bold Black Markings 


Replacement 


HYT50 037103458155 Boxed 3/8 in 50 ft B1 None 0.85 lb 6 

HYT100 037103458162 Boxed 3/8 in 100 ft B1 None 1.50 lb 6 

HYT100D 037103460196 Boxed 3/8 in 100 ft B5 None 1.50 lb 6 

HYT15CME 037103459411 Boxed 10 mm, 3/8 in 15 m, 50 ft B14 None 0.90 lb 6 

HYT30CME 037103459428 Boxed 10 mm, 3/8 in 30 m, 100 ft B14 None 1.20 lb 6 

HYT50CME 037103003461 Boxed 10 mm, 3/8 in 50 m, 164 ft B14 RHY50CME 1.50 lb 6 


Banner 

■■Professional Tradesman’s Quality 


■■Yellow Clad Tape; 3/8"/10mm Wide and 0.008"/0.2mm Thick 

■■Large Easy Action Winding Drum and Friction Washers 


■■Bold Graduations with Black and Red Numbers for Accurate 

Measuring 

■■H Prefix Denotes Product Blade is Fitted with A Folding Hook 

Ring 


Replacement 


HW223 037103458865 Boxed 3/8 in 50 ft B1 None 1.00 lb 6 

HW223D 037103458902 Boxed 3/8 in 50 ft B5 None 0.90 lb 1 

HW223ME 037103458889 Boxed 10 mm, 3/8 in 15 m, 50 ft B9 None 0.90 lb 6 

HW226 037103458940 Boxed 3/8 in 100 ft B1 None 1.60 lb 6 

HW226D 037103458964 Boxed 3/8 in 100 ft B5 None 1.60 lb 1 

HW226ME 037103458988 Boxed 10 mm, 3/8 in 30 m, 100 ft B9 None 1.60 lb 6 

HW227CME 037103459039 Boxed 10 mm, 3/8 in 50 m, 164 ft B8 None 2.50 lb 1 

Pro Series Long Steel Tape 

■■3:1 Gear Ratio for Fast Blade Retrieval 

■■Precise, Easy to Read Black and Red Blade Markings 

■■Premium Steel Blade Resists Kinks 


Replacement 


PS100S 037103201447 Carded 3/8 in 100 ft B1 None 1.05 lb 1 

1050


Home Shop 

■■Vinyl Covered Steel Case 


■■0.005" Thick Blade 

■■Large Easy Action Winding Drum with Friction Washers 

■■Fitted with A Folding Hook Ring 


Replacement 


HW50 037103458827 Boxed 3/8 in 50 ft B1 OY50 0.70 lb 6 

HW100 037103458841 Boxed 3/8 in 100 ft B1 OY100 1.25 lb 6 

Hi-Viz® Universal Lightweight 

■■High Impact Polystyrene Case, Hi-Viz® Orange 

■■Yellow Clad Blade 0.005"/0.13mm Thick 

■■Easy Wind Nylon Drum 

■■Easy-To-Read Black and Red Markings 

■■Hook Ring is Retained Neatly in the Contoured Mouth of the 

Case 


■■All Tapes Are Carded 


Replacement 


50 037103450685 Carded 3/8 in 50 ft B1 OY50 0.50 lb 6 

100L 037103451002 Carded 3/8 in 100 ft B1 OY100 0.95 lb 6 

HV15CME 037103089632 Carded 10 mm, 3/8 in 15 m, 50 ft B8 RY15CME 0.50 lb 6 

HV30CME 037103089656 Carded 10 mm, 3/8 in 30 m, 100 ft B8 RY30CME 0.94 lb 6 

12 

Artisan® Diameter and Tree Tapes 


■■Chrome Clad® and Nubian® Blade 

■■0.008" Thick Blade 

■■Large Easy Winding Drum and Friction Washers 



Replacement 


120TP 037103451101 Boxed 3/8 in 20 ft B10 None 0.30 lb 1 

C120TP 037103451125 Boxed 3/8 in 20 ft B10 None 0.55 lb 1 

120P 037103451088 Boxed 3/8 in 240 in B12 O120P 0.50 lb 1 

C106PM 037103060273 Boxed 10 mm 6.5 m B15 None 0.60 lb 1 

C106TPM 037103060266 Boxed 10 mm 6.5 m B15 RC106TPM 0.60 lb 1 

C106PMCAL 037103206480 Boxed 10 mm 6.5 m CAL Ring None 0.60 lb 1 


1051

F I B E R G L A S S & S Y N T H E T I C T A P E S 

Fiberglass & Synthetic Tape Blade Styles 

C1 yellow clad 

C2 YELLOW CLAD 

C3 YELLOW CLAD 




• Graduated feet and inches to 1/8ths; numbered with feet 

and instantaneous foot markings in red and inches 

in black 




• Graduated feet to 1/10ths and 1/100ths; numbered with 

feet in red and 1/10ths of feet in black 

• 13mm width only 



• Graduated millimeters, numbered at each centimeter with 

red instantaneous meter number 


C5 WHITE CLAD 

C6 WHITE CLAD 

.8 

.9 



• Black and red markings on both sides 

• Two-sided tapeline; top side in feet, inches, and 1/8ths, 

numbered at each foot with red instantaneous foot 

numbers; bottom side graduated in millimeters, 

numbered centimeters with red instantaneous 

meter number 

• White clad blade 

• 5/8" width 


• Graduated feet and inches to 1/8ths, red feet numbers 

and black inch numbers 

• White clad blade 

• 5/8" width 


• Graduated feet to 1/10ths and 1/100ths, red feet 

numbers and black tenths of feet numbers 


C11 YELLOW CLAD & WHITE CLAD 

C12 YELLOW CLAD & WHITE CLAD 




• Black and red markings on both sides 

• Two-sided tapeline; bottom side in metric, graduated 

in millimeters, numbered in centimeters, with red 

instantaneous meter number; top side graduated feet 

to 1/10ths and 1/100ths, numbered with feet in red and 

10ths of feet in blade 


• White on top, yellow on bottom 


• Two-sided tapeline; top side feet and inches, graduated 

to 8ths; bottom decimal feet 


• White on top, yellow on bottom 


• Two-sided tapeline; top side graduated in millimeters, 

numbered centimeters with meters, bottom in feet 

and inches 

1052


Pro Series Fiberglass Tapes 

■■Patents Pending 

■■Interchangeable End Hooks for User Convenience 

■■Ring End Hook Snaps Onto Stake for 1-Person Measurements 

■■Standard Folding End Hook for General Measuring Needs 

■■Appraiser's Hook Attaches to Oversized Objects Such as 

Downspouts 

■■3-To-1 Rewind for Fast Blade Retraction 

■■3/4" Blade is More Durable; Large Numbers Are Easy to Read 

■■2-Sided Blade, Feet & Inches on Top, Feet to 10ths and 100ths 

on Bottom 

■■62 Fiberglass Strands and Double-PVC Coating for Durability 

and Strength 

■■Cushion Grips on Handle and Frame Arms for Comfort 

Cat. No. UPC No. Packaging Blade Width Blade Length Blade Style Product Weight Shelf Pack Qty. 

PSFE100 037103224811 Carded 3/4 in 100 ft C11 2.55 lb 2 



PSFM030CME 037103233981 Carded 19 mm, 3/4 in 30 m, 100 ft C12 2.55 lb 2 



PSFE3PCKIT* 037103231635 Carded - - None 0.05 lb 3 

* 3 Piece Replacement End Hook Kit 

Fiberglass Tapes 

■■Open Four-Arm Frame Design Protects Blade, Does Not Trap 

Dirt in Case 

■■Lightweight But Strong Case is Easy to Handle and Rewind 

■■Two-Material Grip is Comfortable to Use 

■■Hi-Viz® Orange Case is Easy to Find on the Job Site 

■■Folding End Hook for True-Zero Measurements 

■■Yellow Clad Fiberglass Blade Impervious to Moisture 


FE050 037103224033 Carded 1/2 in 50 ft C1 1.38 lb 6 

FE050D 037103224040 Carded 1/2 in 50 ft C2 1.38 lb 6 









FM015CME 037103224132 Carded 1/2 in 15 m, 50 ft C4 1.30 lb 6 

FM030CM 037103224101 Carded 13 mm 30 m C3 1.56 lb 6 

FM030CME 037103224156 Carded 13 mm, 1/2 in 30 m, 100 ft C4 1.58 lb 6 

FM030DM 037103224163 Carded 13 mm, 1/2 in 30 m, 100 ft C7 1.58 lb 6 

FM050CM 037103224170 Carded 13 mm 50 m C3 1.75 lb 2 




12 


1053


HI-VIZ® Linear 

■■Lightweight High Impact ABS Case 

■■Durable 1/2" Wide Fiberglass Tape is Encapsulated in Flexible 

Plastic 

■■Non-Conductive, Easy-To-Read Black, Red Markings, Yellow 

Background 

■■Lightweight High Impact Abs Winding Drum for Smooth Tape 

Recovery 

■■Blaze Orange Case 


1707 037103454669 Carded 1/2 in 150 ft C1 1.65 lb 1 

703 037103453525 Carded 1/2 in 50 ft C1 0.90 lb 1 

703D 037103453549 Carded 1/2 in 50 ft C2 0.80 lb 1 

706D 037103453587 Carded 1/2 in 100 ft C2 1.30 lb 1 

706L 037103453563 Carded 1/2 in 100 ft C1 1.20 lb 1 

Hi Line® Tapes 

■■Synthetic Fiber Blade is Non-Conductive 

■■Steel Case with Vinyl Covering 



HD403 037103202369 Carded 5/8 in 50 ft C5 1.00 lb 1 

HD403D 037103202352 Carded 5/8 in 50 ft C6 1.00 lb 1 

HD406 037103202338 Carded 5/8 in 100 ft C5 1.40 lb 1 

HD406D 037103202321 Carded 5/8 in 100 ft C6 1.40 lb 1 

HDH406 037103202376 Carded 5/8 in 100 ft C5 1.40 lb 1 

HDH406D 037103202383 Carded 5/8 in 100 ft C6 1.40 lb 1 

1054

O I L G A U G I N G T A P E S & P L U M B B O B S 

Oil Gauging Tapes & Plumb Bobs Information 

Plumb bobs are not supplied with tapes. The last part of the catalog number denotes the style of the bob the tape is made to accept. Lufkin oil gauging 

tapes and plumb bobs are manufactured to meet the applicable specifications outlined in the National Institute of Standards and Technology Handbook 44, 

2011 Edition, Section 5.52. Manufacturing tolerances for final measurement comply with API MPMS Second Edition, August 2005, Chapter 3, Section 1A, 

Appendix 1.2. 

1. Never gauge a tank during an electrical storm. 

2. Ground yourself and your tools by touching the tank ladder before climbing the ladder. Do not wear gloves when grounding yourself. Gloves prevent 

proper grounding. 

3. Ground yourself before opening the gauging hatch by touching the handrail or platform (without gloves on). During and after removal of the gauging 

cover, stand so that the gas will not be inhaled. Wear a gas mask if toxic gases are present. 

4. Always maintain contact between the gauging tape and the edge of the hatch from the moment the gauge bob enters the hatch until the gauge bob is 

removed from the hatch. 

OIL GAUGING TAPES 

• Chrome Clad® for dark (heavy oils) 

• Nubian® for light (clear oils) 

• “Double Duty” oil gauging tapes with both Chrome Clad® and Nubian® (black) for dark (heavy) and light (clear) oils 

• Made of heavy gauge 1/2" (13mm) x .012" (0.3mm) steel 

• Snap-swivel hook on front end of tape for a plumb bob 

• Two arm frames for shorter lengths; four arm frames for 30m/100' and greater 

• Large drums and winding handles for quick and easy rewinding 

• Handle folds over for storage and to lock line at extended position 

It takes more than a quality gauging tape, it takes a smart user. Every time you use a Lufkin oil gauging tape, follow proper grounding techniques. Ground 

your body. Ground your gear. And always use a grounding strap. Lufkin oil gauging tapes come complete with a grounding strap and an ESD handle, and 

are in full compliance with all current and proposed American Petroleum Institute standards. Achieve a solid ground every time. Use Lufkin oil gauging 

tapes, and follow proper grounding procedures. 

12 

How to Measure an Inage Plumb Bob 

Tapes cut and fitted with the swivel snap to be used with the 588 and 590 plumb-bobs are known as inage gauging 

tapes. When the plumb bobs are assembled to the swivel snap the zero point is at the bottom of the plumb bob. 

When being used, the plumb bob and tape are lowered until the bob contacts the bottom of the tank. When the tape 

is reeled in, the liquid line is read on the tape line itself, thereby showing you the contents of the tank. 

How to Measure an OUTage Plumb Bob 

Tapes which have the swivel snap fitted so as to accommodate the 5871/2 plumb bob are known as outage tapes. 

When the 5871/2 plumb bob is assembled to the tape line the zero point is at the intersection of the swivel snap and 

the plumb bob. When using outage gauging tapes the tape is lowered into the tank until the plumb bob just penetrates 

the liquid. The tape is then rewound and the liquid level is read right off the plumb bob. The reading on the 

plumb bob is added to the tape reading giving the total outage (how much liquid has been removed from the tank). 


1055


Oil Gauging Tape Blade Styles 

D1 CHROME clad ® & NUBIAN ® 



2 

3 

3 





• Graduated instantaneous feet and inches to 1/8ths • Graduated in feet to 1/10ths and 1/100ths of an foot; 


reads right to left 


• Graduated in millimeters on one side; other side 

instantaneous feet and inches to 1/8ths 

D5 Nubian ® 

D4 CHROME clad ® 

D5 NUBIAN ® 

D6 CHROME clad ® 

& STAINLESS STEEL 

1- 5 1- 4 

1- 3 

1- 2 

1- 1 1F 

0m 

3 40 3 30 

• 1/2" 

width only 


• Nubian® blade 

• 1/2"/13mm width 


 

• Markings 

 

one side only 


• Graduated feet and inches to 1/8ths; instantaneous • Graduated feet and inches to 1/8ths; instantaneous 

• Black and red markings on metric side 

foot readings 

foot 

readings 

 

• Metric - graduated meters to millimeters; numbered 

right to left in meters and millimeters 

• English side - graduated feet and inches to 1/8ths; 

numbered right to left 

D7 NUBIAN ® 

0m 

5 2 5 1 5 0 4 9 4 8 4 7 4 6 4 5 4 4 4 3 4 2 

3 50 3 20 3 10 3 00 2 90 2 80 2 70 2 60 2 8 

2 

2 




• Graduated in meters; numbered in millimeters 

1056


Atlas® Chrome Clad® / Nubian® Double Duty 

■■Recessed Beneath Multiple Layers of Nickel and Chrome 

Electroplating 

■■Provides Greater Resistance to Wear and Corrosion 

■■All Tapes Read Right to Left 

■■Heavy-Duty Frame Designed for Years of Rugged Use 

■■All Frames Include a Grounding Strap 

■■Plumb Bob Must be Ordered Separately 

Cat. No. UPC No. Packaging Bob Cut Blade Width Blade Length Blade Style 

Replacement 

Blade Cat No. 

CN129012SF5 037103459527 Boxed 590 1/2 in 18 ft D1 OCN129012SF5 1.60 lb 1 


CN1290SME 037103001696 Boxed 590 

13 mm, 

1/2 in 

Product 

Weight 

Shelf Pack 

Qty. 

8 m, 26 ft D3 None 1.80 lb 1 


CN1293SF5871 037103459763 Boxed 5871/2 1/2 in 50 ft D1 None 2.30 lb 1 


CN1293SDF590 037103459596 Boxed 590 1/2 in 50 ft D2 OCN1293SDF59 2.20 lb 1 

CN1293SMEF59 037103459602 Boxed 590 

13 mm, 

1/2 in 

15 m, 50 ft D3 OCN1293SMEF5 2.30 lb 1 

CN1294SF5871 037103459770 Boxed 5871/2 1/2 in 66 ft D1 None 2.70 lb 1 


CN1294SMEF59 037103459619 Boxed 590 

CN1295SME590 037103122124 Boxed 590 

13 mm, 

1/2 in 

13 mm, 

1/2 in 


23 m, 75 ft D3 OCN1295SME590 2.88 lb 1 


CN1295SME 037103440815 Boxed 5871/2 

13 mm, 

1/2 in 

23 m, 75 ft D3 None 2.70 lb 1 


CN1296SMEF59 037103459626 Boxed 590 

CN1298SME590 037103104243 Boxed 590 

13 mm, 

1/2 in 

13 mm, 

1/2 in 


38 m, 125 ft D3 None 4.20 lb 12 

12 


1057


Atlas® Chrome Clad® 

■■Recessed Beneath Multiple Layers of Nickel and Chrome 

Electroplating 

■■Provides Greater Resistance to Wear and Corrosion 

■■All Tapes Read Right to Left 





Replacement Blade 

Cat No. 

C129012SF 037103454065 Boxed 590 1/2 in 18 ft D4 OC129012SF59 1.60 lb 1 

C1290SF590 037103454102 Boxed 590 1/2 in 25 ft D4 OC1290SF590 1.80 lb 1 



C2910MME590 037103063373 Boxed 590GM 13 mm, 1/2 in 10 m, 33 ft D6 OC2910MME590 1.95 lb 1 

C2915MME590 037103091406 Boxed 590GM 13 mm, 1/2 in 15 m, 50 ft D6 None 2.35 lb 1 

C2920MME590 037103003386 Boxed 590GM 13 mm, 1/2 in 20 m, 66 ft D6 None 2.70 lb 1 

C2920MME150M 037103047168 Boxed 150 mm 13 mm, 1/2 in 20 m, 66 ft D6 None 2.50 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 


Atlas® Nubian® 

■■Ideal for Gauging Clear Oils 

■■Etched Background 

■■Blade Protected By Flowed-On Epoxy Coating 

■■Raised Bright Steel Markings Are Clearly Legible 

■■All Tapes Read Right to Left, Except 3/8" X 50' Reads Left to 

Right 





Replacement 

Blade Cat No. 

1290SF590 037103454089 Boxed 590 1/2 in 25 ft D5 O1290SF590 1.70 lb 1 

1293SF590 037103454201 Boxed 590 1/2 in 50 ft D5 O1293SF590 2.30 lb 1 

1293SM590 037103441676 Boxed 590 13 mm 15 m D7 None 1.90 lb 1 

Atlas® Stainless Steel® 

■■Designed for Use in Highly Corrosive Solutions 

■■Stainless Steel Blade Resists Corrosion 




■■Recommended Plumb Bob: S590 

■■Blade Style: D4 

Product 

Weight 

Shelf Pack 

Qty. 


Replacement 

Blade Cat No. 

S1291F590 037103440839 Boxed 590 1/2 in 33 ft D4 OS1291F590 1.50 lb 1 

S1293F590 037103456823 Boxed 590 1/2 in 50 ft D4 OS1293F590 2.00 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

1058


■■For Use in Heavy Oils 

■■Cylindrical Shaped 

■■Tapered Point Tip 

Inage Oil Gauging Plumb Bobs 


590 037103453204 Boxed 20 oz Plumb Bob, Solid Brass Inage, Cylindrical Shape 6.75 in 1.40 lb 1 

590G 037103453235 Boxed 20 oz Plumb Bob, Solid Brass, Graduated in Inches, Blunt Point 6.75 in 1.40 lb 1 

590GM 037103453242 Boxed 20 oz Plumb Bob, Solid Brass, Graduated in Millimeters and Centimeters 6.75 in 1.40 lb 1 

590GME 037103442895 Boxed 20 oz Plumb Bob, Solid Brass, Metric and English 6.75 in 1.40 lb 1 

S590 037103460134 Boxed 20 oz Plumb Bob, Stainless Steel, Cylindrical Shape 6.75 in 1.20 lb 1 

■■Square Shaped Solid Brass Bob 

■■Eye Milled From Solid Brass Block (Not Removable) 

■■Zero Falls Inside Top of Hook Eye 

Outage Oil Gauging Plumb Bob 


58712 037103453181 Boxed 20 oz Plumb Bob, Solid Brass Outage 6 in 1.27 lb 12 

150MM 037103105875 Boxed 570g Plumb Bob, Brass Outage 152 mm 1.27 lb 12 

12 


1059

S U R V E Y I N G T A P E S 

Steel Tape Line Accuracy 

Lufkin® steel tapes are made to government standards. Our bench standards for the United States are certified accurate by the United States Department 

of Commerce, N.I.S.T. Tapes for Canada are made to Canadian government standards. 

Temperature standard for steel tapes is 68°F, which equals 20°C. Coefficient of expansion of steel tapes is 0.00000645' per degree F; 0.0000116' per 

degree C. This amounts to 0.000645' or 0.00774" per degree F. on a 100' tape, and one-half as much on a 50' tape. As a figure that is reasonably accurate 

and also easy to handle, it is customary on very long runs of pipe to allow 1/10" per 100' for each 10° change. 

The above illustration shows, for a 100' tape, the actual length variations of temperature within the range of 20° below to 120° above zero °F. The terminal 

graduation on the lower edge is at 68°, this being standard temperature. Standard tension for steel tapes 25 to 100' long (10 to 30m) supported entire 

length on a horizontal, flat surface, is 10 pounds (4.5 kg.); for all tapes over 100', 20lbs., (9kg.). For steel tapes suspended horizontally and supported only 

at ends, there can be no set or standard tension for accuracy because of weight and other variations. 

The following listings are averages of many tests made by the N.I.S.T. of Lufkin® steel tapes supported throughout and supported ends only. These averages 

are taken from the experience of tests and should be used as a working basis only, and not to replace the test of any individual tape. All tape lengths 

are 100'. 

Tape Width (in) Kind of Tape 

Tension of Accuracy 

Thru-out (lbs) 

Supported Ends 

Only (lbs) 

1/4 Chain Tapes 10 24 

1/4 Engineer's (0.12") 10 18 

1/4 Engineer's Extra Heavy Tapes 10 24 

3/8 & 1/2 Standard Weight Tapes 10 18 

NOTE: Temperature and tension need to be taken into account 

only on precise work. We recommend a government test of 

tapes to be used for such work or for use as master standard. 

The N.I.S.T. and Lufkin® have a charge for this test. 


Steel Tape Blade Styles 

E1 CHROME clad ® 

& YELLOW CLAD 

• 1/4" and 3/8" widths 

• Chrome Clad® and yellow clad blade 

• Markings on one side only 

• Graduated to feet, 1/10ths and 1/100ths with a blank 

space at last end 

E4 NY-clad ® YELLOW 


• Nylon-clad yellow blade 




• Numbered with feet and instantaneous foot markings 

in red and inches in black 




• Markings on both sides 

• Graduated millimeters one side 

• Graduated feet, inches and 1/8ths other side 

E5 NY-clad ® YELLOW 

• 1/2” width only 

• Nylon-clad yellow blade 


• Graduated feet to 1/10ths and 1/100ths 

• Numbered with feet in red and 1/10ths in black 


& YELLOW CLAD 

• 1/4" and 3/8" widths 


• Yellow clad available in 1/4" only 




• 16" centers indicated by a diamond symbol on 3/8" 

width only 


0. 

200 

• 6mm width 


• Graduated meters to millimeters 

• Red meter numbers and black millimeter numbers 


1060


E12 CHROME clad ® E13 CHROME clad ® 

8 9 

2 

0. 200 

0. 200 

• 1/4" width 

• Black and red markings one side; black markings 

other side 

• Graduated meters to millimeters one side 



• Graduated feet to 1/10ths and 1/100ths other side 

• Numbered feet and 1/10ths black markings only 

• 1/4" width 


• Graduated meters to millimeters one side 



• Graduated feet and inches to 1/8ths other side with 

red feet numbers and black inch numbers 

Super Hi-Way® Nubian® 

■■Nominal Thickness 0.017" 

■■Easy-To-Read Raised Graduations 

■■Lines Have A Blank Space at Each End 

■■Extra Foot Before Zero Graduated Right to Left to 1/10ths 

and 1/100ths 

■■Balance Marked Every Foot Except Last Foot of Each 100' 

Length, 100ths 


Replacement 


O9100B 037103455437 Boxed 5/16 in 100 ft None None 2.20 lb 1 



12 

Pro Series Ny-Clad® Steel Tapes 

■■Durable Nylon Coating on Blade Resists Wear Under 

Extreme Conditions 

■■Super Fast 3-To-1 Blade Retraction Saves Time in the Field 

■■Steel Blade Will Not Stretch Under Normal Use 


Replacement 


PS1806N 037103236876 Carded 1/2 in 100 ft E4 None 2.02 lb 4 

PS1806DN 037103236883 Carded 1/2 in 100 ft E5 None 1.98 lb 4 

PS1808N 037103236890 Carded 1/2 in 200 ft E4 None 3.04 lb 2 




1061


Derrick 

■■Nominal Blade Thickness 0.019" 

■■Extra Large Winding Drum Provides Rapid Line Recovery 

■■Special Hook Ring with Ribbed Face at Zero 

■■Leather Thong is Provided to Use Through Eye at Rear 



Replacement 


C2276D 037103454713 Boxed 1/4 in 100 ft E1 OC2276D 2.90 lb 1 

C2276ME 037103454737 Boxed 1/4 in, 6 mm 100 ft, 30 m E2 OC2276ME 3.00 lb 1 

CD2730DMM 037103063700 Boxed 6 mm 30 m E12 OCD2730DMM 2.75 lb 1 

CD2750MME 037103063687 Boxed 1/4 in, 6 mm 164 ft, 50 m E13 OCD2750MME 3.60 lb 1 


Western® 

■■Thickness 0.019" and 1/4"/6mm Wide Blade 

■■Blank Space at Each End 

■■Turning Handle Locks Line at Any Position 

■■Reel is Nickel-Plated, 4-Arm with Rollers in Each Arm for 

Smooth Winding 

■■Oversize Drum with Long, One-Piece Winding Handle, Quick 

Return of Line 

■■Riveted Clips for Holding Thongs 

■■Reel Available Separately 

■■Y1676D is Yellow Clad, Thickness 0.16" 


Replacement 



Y1676D 037103459435 Boxed 1/4 in 100 ft E1 None 2.40 lb 1 

1062


Chrome Clad® 

■■3/8"/10mm Wide and 0.008" Thick 

■■Long, Easy-Action Winding Handle That Locks Line 

in Any Position 

■■Reel is Nickel Plated, 4-Arm with Rollers in Each Arm for 


■■Instantaneous Reading 

■■Zero Falls at Outer End of Ring 



Replacement 


C1286 037103454003 Boxed 3/8 in 100 ft E3 - 2.20 lb 1 


C1288 037103454041 Boxed 3/8 in 200 ft E3 OC1288 3.19 lb 1 

C1288BLK 037103124128 Boxed 3/8 in 200 ft E3 - 3.19 lb 1 

Peerless 

■■Designed for Engineers and Surveyors Who Prefer a 4-Arm Reel 

■■Chrome Clad® and Yellow Clad Blade 

■■Blade 1/4"/6mm Wide and 0.016"/0.4mm Thick 

■■Subdivided Line Removes Easily From Reel 

■■Long, Easy-Action Winding Handle That Locks Line 

in Any Position 

■■Reel is Nickel Plated, 4-Arm with Rollers in Each Arm for 


■■Open Design Construction Aids in Drying Line and Clearing 

Out Dirt 

■■Pair of 580 Finger Rings and a 579 Engineer’s Conversion Rule 

are Furnished with Tape or Replacement Line 



Replacement 






C2730MM 037103060297 Boxed 6 mm 30 m E11 OC2730MM 2.40 lb 1 

C2730DMM 037103060204 Boxed 1/4 in, 6 mm 100 ft, 30 m E12 OC2730DMM 2.50 lb 1 

C2730MME 037103060280 Boxed 1/4 in, 6 mm 100 ft, 30 m E13 OC2730MME 2.40 lb 1 

C2750DMM 037103060181 Boxed 1/4 in, 6 mm 164 ft, 50 m E12 OC2750DMM 3.44 lb 1 

C2750MME 037103001351 Boxed 1/4 in, 6 mm 164 ft, 50 m E13 None 3.36 lb 1 

Y1276 037103457790 Boxed 1/4 in 100 ft E3 RY1276 2.00 lb 1 



Y1276D 037103457806 Boxed 1/4 in 100 ft E1 RY1276D 2.10 lb 1 

Y1278D 037103457844 Boxed 1/4 in 200 ft E1 RY1278D 3.05 lb 1 

Y1279D 037103457882 Boxed 1/4 in 300 ft E1 None 4.10 lb 1 

12 


1063

R E E L S & F R A M E S 

81 and 91 Series Reels for Chrome Clad® and 

Gauging Tapes 

■■For 3/8" 10mm and 1/2"/13mm Widths - Chrome Clad and 

Gauging Tapes 

■■Chrome 2 Arm Frame 

■■Not All Replacement Parts Sold Separately 

Cat. No. UPC No. Packaging Blade Width Blade Length Product Weight Shelf Pack Qty. 

9150L 037103450968 Boxed 1/4 in 200 ft 1.20 lb 1 

■■For Over 100' Lengths 



31 Series Reel for Over 100' Lengths 


31200 714994817529 Boxed 5/16 in 300 ft 3.00 lb 1 

31300 037103450548 Boxed 1/4 in 100 ft 3.10 lb 1 


11 Series Reel for Peerless Chrome Clad® Tapes 

■■For 1/4"/6mm Wide - 100' and 200' Lengths, Fits Peerless 

Chrome Clad Tapes 




11100 037103450272 Boxed 1/2 in 50 ft 1.30 lb 1 

11200 037103450289 Boxed 5/16 in 200 ft 1.40 lb 1 

■■For 1/4"/6mm Wide - 150 and 200' Lengths 

■■Fits Western Chrome Clad® Tapes 

Derrick Replacement Reel 

Cat. No. UPC No. Packaging Fits Product Number Blade Width Blade Length Style of Case or Reel Product Weight Shelf Pack Qty. 

12200 037103450340 Boxed Western® Chrome Clad® Tapes 1/4 in 200 ft 4 Arm 1.85 lb 1 

1064

R E E L S & F R A M E S 

Western® Replacement Reel 

■■For 1/4" or 5/16" X 100' Lengths of Steel Tapes Only 






31100 037103450517 Boxed Fits 100 ft Tapes Only 1/4 in 100 ft 2 Arm 1.40 lb 1 

Engineering and Surveying Replacement Reel 

■■For 1/2" X 75' Chrome Clad® and Gauging Tapes 






9175 037103450975 Boxed Chrome Clad and Gauging Tapes 1/2 in 75 ft 4 Arm 1.30 lb 1 

Detachable hook 

■■Easily Attaches and Detaches From Standard Ring Tape Line 

■■Heavily Nickel Plated, Zinc Hook 

■■Serrated Face Grips Firmly and Releases Easily 

■■On Tapes Measuring From Outer End of Ring, Zero Falls 

at Inside of Hook 

■■Can Be Used on Lines 3/8"/10mm Wider 


552 037103452832 Boxed 0.04 lb 1 

Tape Clamps Handle 

■■Used for Quickly and Positively Gripping a Steel Tape at Any 

Point 

■■Applies Light or Heavy Tension 

■■Clamp is Applied and Removed By Simply Operating the Handle 

■■Used Properly, It Will Not Damage a Tape in Any Way 

■■Made of Chrome-Plated Zinc Alloy 


584 037103453143 Boxed 0.20 lb 1 

12 


1065

M I S C E L L A N E O U S M E A S U R I N G 

Tape Tension Handles 

■■Use with Steel Tapes for Extremely Accurate Measurements 

■■Rustproof Brass Construction with Black-Filled Etched 

Graduations 

■■Graduations Begin at Snap End, Easy-To-Read When Tension 

is Applied 

■■Capacity of 30 Lb X 1/2 Lb and 25Kg X 25Kg 


586 037103453150 Boxed 0.60 lb 1 

Red End® Extension Folding Wood Rules 

■■Slide Rule Runs Under Friction in T-Slot 

■■Stops at Each End to Prevents Slide From Falling Out 

■■Marked Both Sides and Both Edges 

■■Graduated to 1/16ths of An Inch 

■■16" Stud Centers in Red, Regular Outside Markings 

■■TX46N has Two 6" Extension Slides; an Extension is ready for 

use on the First Section 

■■HX46N has a Hook; Zero Falls Inside of Hook, for Distance 

Measuring 

■■X46FN has Flat, Inside Markings; Numbering Begins on Inside of 

Rule 



TX46N 037103265555 Boxed 5/8 in 6 ft 0.35 lb 6 

HX46N 037103265746 Boxed 5/8 in 6 ft 0.39 lb 6 

X48N 037103265708 Boxed 5/8 in 8 ft 0.50 lb 6 

X46FN 037103265685 Boxed 5/8 in 6 ft 0.35 lb 6 

Red End® Folding Wood Rule 

■■Marked Both Sides, Both Edges 

■■066FN has Inside Markings; Numbering Begins on Inside of 

Rule; Measurement Lies Close to the Work 

■■062CMEN is Marked Both Sides, Reading Left to Right on 

Both Sides; Rule is Graduated in millimeters with centimeters 

and meter markings on metric side; English Side is Marked to 

1/16ths 


T066N 037103265609 Boxed 5/8 in 6 ft 0.34 lb 6 

066FN 037103265531 Boxed 5/8 in 6 ft 0.34 lb 6 

062CMEN 037103265586 Boxed 5/8 in 6 ft 0.39 lb 6 

1066

F O L D I N G R U L E S 

Red End® - Two Way Folding Wood Rule 

■■For Measuring Left to Right, Right to Left 

■■Marked Both Sides 

■■Graduated in Feet, Inches and 1/16ths on Both Sides and 

Both Edges 

■■Flat Inside Markings Lie Close to the Work 


966N 037103265562 Boxed 5/8 in 6 ft 0.34 lb 6 

Red End® Engineer's Folding Wood Rule 

■■Graduated in Feet, 1/10ths and 1/100ths of Feet 

■■Red Foot Figures 

■■Regular Outside Markings in Feet, Inches and 1/16ths 

■■Decimal Points on Engineer’s Scale Prevent Reading Errors 


1066DN 037103265517 Boxed 5/8 in 6 ft 0.35 lb 6 

1066DMN 037103265692 Boxed 16 mm, 5/8 in 2 m, 6.5 ft 0.36 lb 6 

Red End® Plumber's Folding Wood Rule 

■■For Working with 45° Elbows to Eliminate Figuring and Chance 

of Error 

■■Graduated One Side, in Black, Inches to 1/16ths Both Edges 

■■Other Side in Red, 45° Scale Inches to 1/16ths Upper Edge Only 

■■Turning Rule From Black to Red Gives Corresponding 45° Elbow 

Dimension 


626LN 037103265753 Boxed 5/8 in 6 ft 0.25 lb 6 

12 


1067

F O L D I N G R U L E S 

Red End® Brick Mason's Folding Wood Rule 

■■Used By Bricklayers 

■■Graduated Vertical Inches to 1/16ths, Both Edges 

■■Brick Mason Scale on Inside, Red Course Counters Numbered 

Consecutively 

■■Regular Outside Markings in Black 




■■All Sections Have Square Ends 

■■Every Joint Opens on Even Number 

■■Inside Marked with 6 Scales in a 16" Module 

■■Outside is Graduated on Both Edges to 1/16ths 

■■The First End Section is a Short Section 

■■Permits Butting the Rule on the First 16" Module 

Red End® Modular Spacing Folding Wood Rule 


646LN 037103265616 Boxed 5/8 in 6 ft 0.35 lb 6 


Doyle Log Scale 

■■Designed for Estimating Board Feet in a Cut Log 

■■Graduated Inches to 1/16ths Lower Edge 

■■Outside Markings for 10 and 18' Logs 

■■Inside Markings for 12', 14' and 16' Logs 


TT524N 037103265678 Boxed 5/8 in 48 in 0.24 lb 1 

Steel Blacksmith's Rule 

■■3/4" X 2', 1/32" Thick, 1-Fold, Tempered Steel Rule 

■■This Brings Rule to a Firm Stop When Opened Straight 

■■Riveted Joint Has Large Side Washer and a Stop 

■■Legible, Permanent, Deeply Etched Black Markings 

■■Lower Edge on One Side Graduated to 1/16ths of an Inch 

■■Upper Edge on Other Side to 1/8ths 

■■Lower Edge 75 Circumference Inches to 1/8ths 

■■For Converting Diameters Directly to Circumference 

Measurements 


86 037103456601 Boxed 3/4 in 2 ft 0.14 lb 12 

1068

M E A S U R I N G R U L E S 

School Shop Steel Rules 

■■1/32" X 3/4" X 12" Steel Rule 

■■Used in School Shops and Industrial Plants 

■■Medium Weight, Tempered Steel Rule 

■■Hole in One End for Hanging 

■■Deeply-Etched, Permanent Markings are Black-Filled for Easy 

Reading 

■■Large Graduations, Marked Upper Edge Both Sides 

■■One Side 1/8ths; Other Side 1/16ths 

■■Opposite Measure From Opposite Ends 

Cat. No. UPC No. Packaging Blade Thickness Blade Width Blade Length Product Weight Shelf Pack Qty. 

6012IN 037103450739 Boxed 1/32 in 3/4 in 12 in 0.07 lb 6 

One-Piece Steel Rules 

■■Bold Markings, Deeply Etched and Permanent are Black Filled 

■■Heavier than on Machine-Divided Rules 

■■Large Graduations, Marked Both Sides, Both Edges 

■■Upper Edge Graduated in 1/8ths, Lower Edge in 1/16ths 

■■Opposite Sides Measure From Opposite Ends 


621FT 037103450791 Boxed 1/16 in 1-1/4 in 1 ft 0.30 lb 20 





12 

Aluminum Yardstick 

■■Finest Quality Aluminum Yardstick 

■■Lightweight, Flexible, Rustproof and Sharply Defined Yardstick 

■■Lies Flat and Has a Hang-Up Hole for Storage 

■■Easy-To-Read Markings on Straight Parallel Edges 

■■Fine Graduations One Side Only, Both Edges in Inches to 1/16ths 


1260 037103453808 Boxed 1/32 in 15/64 in 36 in 0.30 lb 6 

Tinner's Steel Circumference Rules 

■■Standard Rule with Tinners and Other Sheet Metalworkers 

■■Tempered Medium-Weight Steel 

■■Hole in One End for Hanging 

■■Markings are Black for Easy Reading 

■■One Side Upper Edge Marked Inches to 1/16ths 

■■Reverse Side has Formulas for Calculating Circumference, 

Diameter, Area 

■■Size Tables for Laying Out Measures and Cans 





1069

M E A S U R I N G W H E E L S 

Metric English Aluminum Meter Stick 

■■Useful for Making the Transition to the Metric System 

■■Graduated on Front Side in Inches to 1/16ths on Upper Edge 

■■Graduated Decimeters, Centimeters and Millimeters Lower Edge 

■■Other Side Shows Table of Equivalents and Conversions 


1261ME 037103453815 Boxed 1/32 in 1 in, 27 mm 1 m 0.40 lb 6 

■■Measure as Fast as You Can Walk 

■■Wheel Calibrated to Counter - Accurate for 

Estimated Measurements 

■■Feet & Inches 

Pro Series Measuring Wheels 


Cat. No. UPC No. Packaging Description Ext. Length Folded Length Product Weight Shelf Pack Qty. 

PSMW18 037103195272 Carded Measuring Wheel, Pro Series, Compact, 8ths 42 in 21 in 1.15 lb 6 

PSMW38 037103195289 Carded Measuring Wheel, Pro Series, Contractor's, 8ths 45.5 in 25 in 3.35 lb 2 

Measuring Wheels 

■■Measure as Fast as You Can Walk 

■■Wheel Calibrated to Counter - Accurate for 

Estimated Measurements 

Cat. No. UPC No. Packaging Description Ext. Length Folded Length Product Weight Shelf Pack Qty. 

MW18TP 037103197368 Carded Executive Measuring Wheel, Feet and Inches in 8ths 26 in 17 in 0.90 lb 6 

MW18M 037103142061 Carded Executive Measuring Wheel, Meters/Decimeters 26 in 17 in 1.00 lb 6 

MW38TP 037103197375 Carded Contractor Measuring Wheel, Feet & Inches in 8ths 41 in 30 in 2.30 lb 2 

MW38M 037103142078 Carded Contractor Measuring Wheel, Meters/Decimeters 41 in 30 in 2.50 lb 3 

1070


Deluxe Feeler Gauge 

■■Gauge Measures Clearances From 0.0015 to 0.035" (0.038 to 

0.889mm) 

■■Includes One 0.010" Brass Blade to Use with Electronic Ignitions 

■■Blade Lengths: 3-5/16" Long, Blade Width: 1/2" 

Cat. No. UPC No. Packaging Feeler Gauge Sizes (inch) Feeler Gauge Sizes (mm) 

161D 082171001611 Carded 

0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 

0.006, 0.007, 0.008, 0.009, 0.01, 0.01 (Brass), 

0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 

0.018, 0.019, 0.02, 0.021, 0.022, 0.023, 0.024, 

0.025, 0.026, 0.028, 0.03, 0.032, 0.035 

0.038, 0.051, 0.063, 0.076, 0.102, 0.127, 0.152, 

0.178, 0.203, 0.229, 0.254, 0.254 (Brass), 0.279, 

0.305, 0.33, 0.356, 0.381, 0.406, 0.432, 0.457, 

0.483, 0.508, 0.533, 0.559, 0.584, 0.61, 0.635, 

0.66, 0.711, 0.762, 0.813, 0.889 

Product 

Weight 

Shelf 

Pack Qty. 

0.25 lb 1 

Feeler Gauge 

■■Gauge Measures Clearances 0.002 to 0.025" (0.051 to 0.635mm) 

■■2-1/2" Rule and 15 Blades 

■■Blade Lengths: 3-5/16" Long 

Cat. No. UPC No. Packaging Feeler Gauge Sizes (inch) Feeler Gauge Sizes (mm) Product Weight Shelf Pack Qty. 

162D 082171001628 Carded 

0.002, 0.003, 0.004, 0.005, 0.006, 

0.008, 0.011, 0.012, 0.013, 0.014, 0.016, 

0.018, 0.02, 0.022, 0.025 

0.051, 0.076, 0.102, 0.127, 0.152, 0.203, 

0.279, 0.305, 0.33, 0.356, 0.406, 0.457, 

0.508, 0.599, 0.635 

0.14 lb 1 

■■25-Blade Gauge Measures Clearances From 0.04 to 1mm 

■■Blade Lengths: 3" Long 

Metric Feeler Gauge 

12 

Cat. No. UPC No. Packaging Feeler Gauge Sizes (mm) Product Weight Shelf Pack Qty. 

2274D 082171022746 Carded 

0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 

0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00 

Mini Feeler Gauge 

■■Miniature 16-Blade Feeler Gauges Are Only 1/4" Wide and 

Measure Clearances From 0.010 to 0.035" (0.254 to 0.889mm) 


0.22 lb 1 


2062D 082171020629 Carded 

0.01, 0.012, 0.015, 0.016, 0.017, 0.018, 

0.019, 0.02, 0.022, 0.024, 0.025, 0.026, 

0.028, 0.03, 0.032, 0.035 

0.254, 0.305, 0.381, 0.406, 0.432, 

0.457, 0.483, 0.508, 0.559, 0.61, 0.635, 

0.66, 0.711, 0.762, 0.813, 0.889 

0.05 lb 1 


1071


■■11-Blade Gauge Measures Valve Tappet Clearances From 0.008" 

to 0.026" 

■■Offset Blades Provide Easy Access. 


Valve-Tappet Feeler Gauge 


163D 082171001635 Carded 

0.008, 0.010, 0.012, 0.013, 0.014, 

0.015, 0.016, 0.018, 0.019, 0.020, 

0.026 

0.203, 0.254, 0.305, 0.330, 0.356, 0.381, 

0.406, 0.457, 0.483, 0.508, 0.660 

0.16 lb 1 

■■6-Blade Gauge Measures Clearance in Electronic Ignition 

Systems Where Non-Magnetic Blades are Required 

■■These Hard Brass Blades Will Not Magnetize 


Non-Magnetic Feeler Gauge 


2223D 082171022234 Carded 0.006, 0.008, 0.01, 0.012, 0.014, 0.016 0.152, 0.203, 0.254, 0.305, 0.356, 0.406 0.05 lb 1 


■■Gauge Checks Clearance Measurements with a 0.002" Range 

■■Stepped Blades Quickly Indicate If Clearance Fails Within the 

Specified Range 

■■Twenty-Two Etched Blades Cover the Complete Range of Sizes 

From 0.004 to 0.027" (0.10 to 0.69mm) 


Go-No-Go Feeler Gauge 


2424D 082171024245 Carded 0.21 lb 1 

■■Use to Set and Measure Spark Plug Gaps Plus Other Ignition 

Clearances From 0.010 to 0.045" (0.254 to 1.143mm) 

■■Six Wire Gauges Check Spark Plug Gaps and 12 Straight Blades 

Check Other Clearances 

■■Includes a Double-Ended Electrode Tool for Easy Adjustments 


Spark Plug Gap and Feeler Gauge Set 


164 082171001642 Carded 

0.025(Wire), 0.03(Wire), 0.034(Wire), 

0.035(Wire), 0.04(Wire), 0.045(Wire), 

0.01, 0.012, 0.015, 0.016, 0.017, 0.018, 

0.019, 0.02, 0.022, 0.024, 0.025, 0.026 

0.635(Wire), 0.762(Wire), 0.864(Wire), 

0.889(Wire), 1.016(Wire), 1.143(Wire), 

0.254, 0.305, 0.381, 0.406, 0.432, 0.457, 

0.483, 0.508, 0.559, 0.61, 0.65, 0.66 

0.19 lb 1 

1072


■■Gauge Measures Spark Plug Gaps From 0.015 to 0.045" (0.381 

to 1.143mm) 

■■Double-Ended Tool is Included for Adjusting Electrodes 

Spark Plug Gap Wire Gauge 


165 082171001659 Carded 

0.02, 0.025, 0.028, 0.03, 0.032, 0.034, 

0.035, 0.04 

0.508, 0.635, 0.711, 0.762, 0.813, 0.864, 

0.889, 1.016 

0.08 lb 1 

■■Use Gauge to Measure Spark Plug Electrode Gaps From 0.025 

to 0.045" (0.635 to 1.143mm) 

■■Includes 2 Electrode Adjusting Tools 

Spark Plug Gap Wire Gauge 

Cat. No. UPC No. Feeler Gauge Sizes (inch) Feeler Gauge Sizes (mm) Product Weight Shelf Pack Qty. 

166D 082171001666 0.025, 0.03, 0.034, 0.035, 0.04, 0.045 0.635, 0.762, 0.864, 0.889, 1.016, 1.143 0.08 lb 1 

Spark Plug Gap Gauge 

■■Gauge Measures Spark Plug Electrode Gaps on Gap Plugs From 

0.040 to 0.080" (1.016 to 2.032mm) 

■■Includes 2 Electrode Adjusting Tools 

12 


2327D 082171023279 Carded 0.04, 0.044, 0.045, 0.05, 0.06, 0.08 1.016, 1.118, 1.143, 1.270, 1.524, 2.032 0.08 lb 1 

■■Circular Coin-Type Ramp Gauge Easily Measures Spark Plug 

Gaps From 0.020 to 0.100" (0.635 to 1.143mm) 

Spark Plug Gap Gauge 


3293D 082171032936 0.05 lb 1 


1073


■■3" to 16" 

■■Preset at 1-1/2" Depth with Indicators for 0.5" and 1" 

■■Manual Power On/Off 

■■Metric/Inch System Interchange at Any Position 

■■Zero Setting at Any Position 

■■Data Output Interface 

■■Measure Wear Dimension of the Brake Drum 

■■Resolution / Repeatability 0.0005" X 0.01mm 

■■Storage Case 

Digital Brake Drum Gauge 


3777 082171037771 Boxed 4.06 lb 1 

■■0 to 6" 





■■Measure Wear Dimension of the Brake Rotors 



Digital Brake Rotor Gauge 


3774D 082171037740 Boxed 1.01 lb 1 


■■LCD Displays Up to 5 Digits 

■■Glass Window Over LCD is Clearer and Does Not Wear Out 

■■Color Coded Off, On/Zero and Inch/mm 

■■Stainless Steel Frame with Hardened Jaws, Graduated 

■■Scale and Thumb Roll 

■■4 Way Measurement, Inside, Outside, Depth & Step 



■■Fitted in a Plastic Box 

6" Digital Caliper with Large LCD window 


3756D 082171037566 Boxed 0.76 lb 1 

1074



■■0-1.3", (0-76mm) Grad. 0.001" 

■■3-1/2" Deep Throat 



■■With Data Output Interface 

■■Measures Thickness of Inside Groves 

■■Fitted in A Plastic Box 

Electronic Digital Rotor Micrometer 


3763 082171037634 Boxed 3.72 lb 1 

■■English Dial Gauge Range: 0-1.3", Gradations: 0.001" 

■■Centered V-Magnet for Strongest Grip on Round or Flat 

Surfaces 

■■Powerful 130 Lbs. Pull 

■■Two Magnetic Mounting Surfaces: Bottom and Back 

■■Swivel Adapter to Mount All Agd Dial Indicators with Lug Backs 

■■Universal Dovetail Clamp for Dial Test Indicators 

■■On / Off Switch 

■■Center Rod 1/2" Diameter X 7" High 

Dial Indicator Set with On/Off Stand 


3761 082171037610 Boxed 4.64 lb 1 

12 

■■2-1/4" Face 

■■3/8" Diameter Shank 

■■English Dial Gauge Range: 0-1.3" 

■■Graduations: 0.001" 

Dial Indicator 


3766 082171037665 Boxed 0.46 lb 1 

■■4" Stainless Steel 

■■One Side - 32nd Inch, One Side - 1mm. 

Pocket Slide Caliper 



2527D 082171025273 Boxed 0.15 lb 1 

1075


■■Stainless Steel Flexible Blade 

■■One Side - 32nd Inch, One Side - 1mm 

6" Pocket Stainless Steel Rule 


2522D 082171025228 Boxed 0.05 lb 1 

Angle Finder 

■■Use Finder to Measure Angles of Most Parts Such As Frame 

Angle (Pitch Forward or Backward) for Setting Truck Front Ends. 

■■A Magnet in the Base Holds Tool in Place. It is Graduated in 1/2° 

Increments. 


2968D 082171029684 Boxed 0.80 lb 1 


■■Tachometer Checks Diesels, Pumps, Compressors, Power Take- 

Offs and Farm and Construction Equipment Revolution Speed 

■■Tool is Ideal Where Electric Tachometer Cannot Be Used 

■■To Use, Hold Rubber Tip Against End of Rotating Shaft and 

Read Revolutions Per Minute Directly From Dial 

■■Range is 100 to 4000 RPM (Clockwise or Counterclockwise) 

■■Length: 4-1/4" 

■■Diameter: 2-3/4" 

Hand-Held Tachometer 


2967 082171029677 Carded Hand-Held Tachometer 0.75 lb 1 

■■Stethoscope Locates the Source of Engine Noise Quickly 

■■Listen for Trouble By Tracing the Sound of Flowing Water, Oil, 

Gas or Steam 

■■Identify Piston Slap, Worn Gears, Faulty Valves, Water Pump 

Failure, Damaged Gaskets and Defective Bearings 

■■Stethoscope Has a Shock-Resistant Handle and Disassembles 

for Storage 

Mechanic’s Stethoscope 


835D 082171008351 Carded Mechanic's Stethoscope 0.25 lb 1 

1076


■■Perfect for Inspecting Hidden Areas, the Mirror Swivels to 

Almost Any Position 

■■Overall Length: 17" 


and Telescoping Handle 


2840D 082171028403 Carded 0.10 lb 

■■Tool Extends Up to 25-9/16" to Pick Up Hard-To-Reach Ferrous 

Metal Parts or Tools Up to 1-1/2 Lbs 

■■Includes a Pocket Clip 

Telescoping Magnetic Pickup Tool 


2593 082171025938 Carded 0.08 lb 

■■Retrieve Small Objects From Hard-To-Reach Places 

■■Push the Button to Open the Claws and Release to Grab 

23" Flexible Retrieving Tool 

12 


2391 082171023910 Carded 0.23 lb 


1077



■■Feeler Gauges Are Mostly Used in to Measure Gap Widths - the 

Clearance Between Two Parts 

■■For Easy Identification, Each Blade is Permanently Marked with 

the Blade Thickness. 

■■Blades Are Flexible Enough That, Even If They Are All on the 

Same Hinge, Several Can Be Stacked Together to Gauge 

Intermediate Values 

22 Pc. Combination Gauge Set 

Cat. No. UPC No. Packaging Feeler Gauge Sizes (inch) Product Weight Shelf Pack Qty. 

70-801 781412708011 Boxed 

0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.010, 0.013, 0.015, 0.011, 0.012, 

0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.022, 0.025 

0.14 lb 1 

8 Pc. Piston Gauge Set 










70-803 781412708035 Boxed 0.002, 0.003, 0.004, 0.005, 0.006, 0.008, 0.010, 0.015 0.16 lb 1 



■■The Offset Blades Are Bent at 45° to Go Around Impediments 






16 Pc. Universal O.H.V. Feeler Gauge Set 


70-807 781412708073 Boxed 

0.009, 0.010, 0.011, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 

0.023, 0.024, 0.025, 0.026, 0.027 

0.20 lb 1 

11 Pc. Bent Feeler Gauge Set 


■■The Offset Blades Are Bent at 45° to Go Around Impediments 







70-811 781412708110 Boxed 0.006, 0.008, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.018, 0.019, 0.020 0.12 lb 1 

1078


32 Pc. Feeler Gauge Set 










70-790 781412707908 Boxed 0.30 lb 1 









22 Pc. Master Go-No-Go Gauge Set 

Cat. No. UPC No. Packaging Go-No-Go Gauge Sizes Product Weight Shelf Pack Qty. 

70-815 781412708158 Boxed 

0.004 - 0.006, 0.005 - 0.007, 0.006 - 0.008, 0.007 - 0.009, 0.008 - 0.010, 0.009 - 0.011, 

0.010 - 0.012, 0.011 - 0.013, 0.012 - 0.014, 0.013 - 0.015, 0.014 - 0.016, 0.015 - 0.017, 

0.016 - 0.018, 0.017 - 0.019, 0.018 - 0.020, 0.019 - 0.021, 0.020 - 0.022, 0.021 - 0.023, 

0.022 - 0.024, 0.023 - 0.025, 0.024 - 0.026, 0.025 - 0.027 

1.00 lb 1 









12 Pc. and 25 Pc. Long Blade Gauge Sets 


70-817 781412708172 Boxed 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.008, 0.010, 0.012, 0.014, 0.015, 0.020 0.32 lb 1 

70-819 781412708196 Boxed 

0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 

0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.025, 0.027, 0.030, 0.040 

0.73 lb 1 






10 Pc. Spark Plug Wire Gauge Set 

12 



70-827 781412708271 Boxed 0.020, 0.025, 0.028, 0.030, 0.032, 0.034, 0.035, 0.038, 0.040 0.08 lb 1 

1079



■■Designed for Inspecting Hidden Areas 

■■360° Adjustable Mirror with A Telescoping Handle 

Telescoping Inspection Mirrors 

Cat. No. UPC No. Packaging Mirror Shape Mirror Size Overall Length Min Overall Length Max Product Weight Shelf Pack Qty. 

70-920 781412709209 Boxed Oval 1.000 in x 2.000 in 5.000 in 17.000 in 0.44 lb 1 

Inspection Mirrors 


■■Designed for Inspecting Hidden Areas 

■■360° Adjustable Mirror and Plastic Grip 

■■Meets or Exceeds US Federal Spec GGG-M-350A 

Cat. No. UPC No. Packaging Mirror Shape Mirror Size Overall Length Min Overall Length Max Product Weight Shelf Pack Qty. 

70-921 781412709216 Boxed Circular 0.875 in - 7.500 in 0.06 lb 1 

70-923 781412709230 Boxed Oval 1.000 in x 2.000 in - 8.500 in 0.09 lb 1 

70-925* 781412709254 Boxed Circular 2.250 in 10.000 in 14.000 in 0.24 lb 1 

70-927 781412709278 Boxed Circular 1.250 in - 8.000 in 0.08 lb 1 

70-929* 781412709292 Boxed Rectangular 2.125 x 3.500 in 11.250 in 15.500 in 0.28 lb 1 

* Has a Telescoping Handle 



■■Designed for Retrieving Small Metal Parts That Fall or in 

Inaccessible Areas 

■■Strong Magnetic Has A Holding Power of Up to 2 Pounds 

Magnetic Retrieving Tools Chrome Plated, 

Cushion Grip 

Cat. No. UPC No. Packaging Overall Length Min Overall Length Max Product Weight Shelf Pack Qty. 

70-933 781412709339 Boxed 16.750 in 26.750 in 0.39 lb 1 

70-935 781412709353 Boxed 8.500 in - 0.08 lb 1 

Flexible Spring Claw 


■■Designed for Retrieving or Positioning Small Parts of Any 

Material That Fall or in Inaccessible Areas 

■■Spring Loaded Plunger Opens Jaws at the End of the Flexible 

Shaft 

■■When Plunger is Released, Jaws Firmly Grip An Object with 

Surprising Strength 

■■Meets or Exceeds US Federal Spec GGG-F-360b 

Cat. No. UPC No. Packaging Overall Length Min Product Weight Shelf Pack Qty. 

70-943 781412709438 Boxed 23.500 in 0.20 lb 1 

1080

S T R I K I N G / S T R U C K 

Ball Pein Hammers............................ 1084 

Tradesmen’s Hammers..................... 1084 

Claw Hammers................................... 1087 

Premium Claw Hammers................... 1088 

Hatchets............................................. 1090 

Ball Pein Hammers............................ 1092 

Claw Hammers.................................. 1092 

Dead Blow Hammers......................... 1094 

Brass Hammers................................. 1098 

Punch & Chisel Sets.......................... 1103 

Chisels................................................ 1111 

13 

Punches.............................................. 1114 

Hammers & Sets................................ 1100 

Punch & Chisel Sets.......................... 1120 

Chisels................................................ 1123 

Punches............................................. 1123 


1081


The quality of Plumb ® tools has been recognized and preferred by tool users throughout the world. The special analysis steel 

used to make Plumb ® tools is forged to close tolerances and heat treated to build in the toughness necessary to withstand impact. 

Extra care is then taken in hardening and tempering to make each part of the tool ready for the specific job it has to do. 

You can be sure Plumb ® tools have the toughness, durability and keenness to do the job. Plumb ® tools are engineered for balance 

and exacting care is taken to assure the head is “hung” on the handle at the right angle. This built-in balance gives Plumb ® tools 

extra driving power. They swing easy – hit hard. 

HAMMERS 

& HATCHETS 

Striking/Struck 

Weight forward design 

with better balance for 

increased power 

and less fatique 

Checkered face 

on selected 

models provides 

increased control 

when driving nails 

High-luster, full 

polish finish 

Patented anti-vibration technology absorbs 

shock and minimizes fatique 

S T R I K I N G / S T R U C K 13 

Oversized striking area for 

improved efficiency and 

accuracy in striking 

‘Thumb-Saving’ magnetic 

nail starter saves time 

and reduces chance 

of injury 

1-piece forged solid 

steel construction 

Contoured band to prevent forward 

slip and provide better grip 

Permabond ® Chemical Bonding Process 

Permabond ® is a chemical weld used in Plumb ® tool eyes to join 

head and handle together. Where conventional wedging splits wood, 

allowing moisture to swell and shrink the handle and eventually 

loosen the head, Permabond ® chemical bonding process seals 

moisture out, forming a bond so tight it takes approximately 2 tons 

of pressure to pull it apart. Permabond ® chemical bonding process 

is used on all nail hammers, except one-piece hammers. 

Co-molded grip with pliable outer 

material for improved comfort 

1082 

Plumb offers a full line of 

hammers and hatchets for 

a wide range of applications 

with solid steel, fiberglass or 

hickory handles 

CONVENTIONAL WEDGING PLUMB ® PERMABOND ®



Armstrong ® offers a wide variety of professional punches, chisels, hammers and accessories for just about any application. All are 

made to exacting standards with ASME and Federal Spec callouts where applicable. Punches and chisels are manufactured from 

either tool steel or high alloy steel for strength and durability. Traditional hammers are drop forged from alloy steel while dead blow 

hammers incorporate a steel shot filled canister. Available individually or in a selection of sets. 

CHISELS, PUNCHES 

& HAMMERS 

Full shank heat treat is a two-step process, 

entire tool length is hardened and tempered, 

then the struck end is drawn back to resist 

“mushrooming” & “chipping” 

Modified parabolic head directs 

the striking force to the center of 

the tool for extented tool life 

Manufactured from shock resistant tool steel for unequalled strength, 

toughness, and durability; higher hardness without brittleness 

Hex stock fits more securely in a punch & chisel holder 

and reduces the tendency to roll on work surfaces 

Pin area precision 

ground to prevent 

any “binding” in 

work area 

Cutting edges are 

ground to precise 

angles for efficient 

cutting and long life 

Tri-oval handle 

conforms to the 

hand increasing 

comfort 

Holds punches & chisels up to 1-1/16” hex stock 

while protecting against hand injury 

Manufactured from shock resistant tool steel for unequalled strength, 

toughness, and durability; higher hardness without brittleness 

“V” head effectively 

traps punch or chisel 

securely on 3 sides 

reducing risk of injury 


GearWrench ® striking and struck tools offer performance features that outperform other brands. Hammers and chisels are designed 

for long life and with safety in mind. Precision ground surfaces provide better visibility and ease of use. 

CHISELS, PUNCHES 

& HAMMERS 

Hardened 

Tips 

Precision Hardened 

Alloy Steel 

Surface ground for 

easy size identification 

HAMMERS 

Softened striking 

surface 

13 


Fully polished head 

Fiberglass handle 

Molded-on rubber grip 

Forged alloy steel head 

1083

H A M M E R S 

Fiberglass Ball Pein Hammers 

■■Rust-Resistant, Forged Black Head with Polished Poles 

and Peins 

■■Professional Quality Fiberglass Handle 

■■Permabond® Construction Between Head and Handle 

■■Comfortable Black Cushion Grip 

■■Meets or Exceeds ASME B173.2 and US Federal Spec. GGG-H- 

86C 

Cat. No. UPC No. Packaging Head Weight (Ounces) Head Weight (Pounds) Length Face Finish Product Weight Shelf Pack Qty. 

11426 037103114266 - 16 oz 1.0 lb 12.75 in Polished 1.50 lb 4 

11428 037103114280 Carded 24 oz 1.5 lb 15 in Polished 2.22 lb 4 

11429 037103114297 Carded 32 oz 2 lb 15 in Polished 1.19 lb 4 

Hickory Ball Pein Hammers 

■■Ground, Black Head 

■■Polished Poles and Peins 

■■Quality, Hickory Handle 


■■Meets or Exceeds ASME B173.2 and US Federal Spec. GGG-H- 

86C 



11494 037103114945 Bulk 4 oz 0.25 lb 10.5 in Polished 0.44 lb 6 





11520 037103115201 Bulk 24 oz 1.5 lb 15 in Polished 2.10 lb 6 

11521 037103115218 Bulk 32 oz 2 lb 15 in Polished 2.50 lb 6 

11522 037103115225 Bulk 40 oz 2.5 lb 15 in Polished 3.00 lb 6 

Blacksmith Hand Hammer 

■■Quality, Steel Forged Head, Hardened and Tempered 

■■Durable, Flat Black Finish on Head 

■■Hickory Handle 

■■Wood Wedged for Easy Handle Replacement 

■■Weight Distribution Concentrated Behind Striking Face for 

Added Power 

■■Meets or Exceeds US Federal Spec. GGG-H-86C 


Head Weight 

(Ounces) 

Head Weight 

(Pounds) Length Face Diameter Product Weight Shelf Pack Qty. 

11524 037103115249 Bulk 40 oz 2.5 lb 14 in 1.25 in 2.93 lb 6 

11525P 037103115256 Bulk 48 oz 3.0 lb 14 in 1.25 in 3.50 lb 6 

1084

H A M M E R S 

Fiberglass Brick Hammers 

■■Forged Head 

■■Polished Face, Chamfer, Bit, Back and Sides 

■■Fiberglass Handle with Comfortable Cushion Grip 


■■1 1/8"- Wide Bit on 24oz. 

■■1 1/16"- Wide Bit on 15oz. 


11422 037103114228 Carded 15 oz 1 lb 12.25 in Polished 1.70 lb 4 


Hickory Handled Brick Hammers 


■■Durable, Black Epoxy Powder Paint on Head 

■■Sharp Cutting Bit 

■■Strong Hickory Handle 


■■1 1/8"- Wide Bit on 24oz. 

■■1 1/16"- Wide Bit on 15oz. 


11492 037103114921 Bulk 15 oz 1 lb 11 in Polished 1.46 lb 6 

11491P 037103114914 Bulk 24 oz 1.5 lb 11 in Polished 1.95 lb 6 

Fiberglass Wide Bit Brick Hammers 


■■Durable, Black Epoxy Powder Paint on Head 

■■Sharp, Wide Cutting Bit 



■■1 3/4"- Wide Bit 



Solid Steel Brick Hammers 

■■Patent Pending Anti-Vibration Shock Absorbing Technology 

■■Anti-Vibration Feature Absorbs Shock and Minimizes Muscle 

Fatigue 

■■1-Piece Forged Solid Steel Construction 

■■Co-Molded Contoured Handle for Increased Comfort and 

Control 

■■High-Luster, Full Polish Finish 

13 



SS20BHN 037103228277 Carded 20 oz 1.25 lb 11 in Polished 1.84 lb 4 

SS24BHN 037103228284 Carded 24 oz 1.5 lb 11 in Polished 1.96 lb 4 

1085

H A M M E R S 

Hickory Handled Scaling Hammers 


■■Durable, Black Epoxy Powder Paint Finish on Head 

■■Red Hickory Handle 


■■Used By Welders 


11530 037103115300 Bulk 16 oz 1 lb 13 in Black 1.60 lb 6 

Fiberglass Handled Prospecting Hammers 


■■Polished Face, Chamfer, and Back 



■■Known As the "Rock Hound" Hammer 


11423 037103114235 Carded 16 oz 1 lb 12.5 in Polished 1.70 lb 4 


Hickory Handled Prospecting Hammers 


■■Durable, Black Epoxy Powder Paint Finish on Head 

■■Polished Face and Chamfer 

■■Strong Hickory Handle 


■■Used Primarily By Prospectors and Geologists 


11493 037103114938 Bulk 16 oz 1 lb 12.5 in Polished 1.45 lb 6 

1086

H A M M E R S 

Premium Curved Claw 

■■High-Luster, Full-Polished Finish 

■■Virtually Unbreakable Fiberglass Handle 

■■Solid Fiberglass Core Covered with A Molded Nylon Jacket 

■■Resists Breakage Due to Overstrike 

■■Contoured Handle for Increased Comfort and Reduced Fatigue 

■■Enlarged Handle Base for Butting Material 

■■New Grip Material Reduces Handle Slickness 

■■Factory Balanced for Maximum Striking Power 


Cat. No. UPC No. Packaging Head Weight (Ounces) Length Face Finish Product Weight Shelf Pack Qty. 

11403N 037103226907 Carded 13 oz 12.5 in Polished 1.25 lb 4 

11402N 037103226891 Carded 16 oz 13 in Polished 1.65 lb 4 


Premium Ripping Claw 

■■High-Luster, Full-Polished Finish 








Head Weight 

(Ounces) Length Face Finish Product Weight Shelf Pack Qty. 



11414N 037103226914 Carded 22 oz 13.5 in Polished 2.08 lb 4 


11417N 037103226945 Carded 22 oz 15 in Checkered 2.10 lb 4 

13 

Regular Curved Claw 

■■Polished Finish on Head, Bell, Striking Face, Back and Sides 

■■Round Bell and Octagon Neck 


■■Solid Fiberglass Core Covered with A Molded Nylon Jacket 

■■Resists Breakage Due to Overstrike 






Head Weight 


11407 037103114075 Carded 13 oz 12.5 in Polished 1.40 lb 4 

11406 037103114068 Carded 16 oz 13 in Polished 1.66 lb 4 



1087

H A M M E R S 

Regular Ripping Claw 

■■Polished Finish on Head, Bell, Striking Face, Back and Sides 

■■Round Bell and Octagon Neck 






Head Weight 




Solid Steel Anti-Shock Premium Curved Claw 



Fatigue 


■■Co-Molded Hatchet Style Handle for Increased Comfort and 

Control 

■■High-Luster, Full Polished Finish 

■■Magnetic Nail Starter 


Head Weight 


SS16CN 037103226648 Carded 16 oz 12.875 in Polished 1.86 lb 4 

SS20CN 037103226662 Carded 20 oz 13.75 in Polished 1.80 lb 4 


Solid Steel Anti-Shock Premium Ripping Claw 



Fatigue 


■■Co-Molded Hatchet Style Handle for Increased Comfort and 

Control 

■■High-Luster, Full Polished Finish 

■■Magnetic Nail Starter 


Head Weight 


SS16RN 037103226655 Carded 16 oz 12.875 in Polished 1.65 lb 4 


SS22RCFN 037103226709 Carded 22 oz 15.875 in Checkered 2.09 lb 4 


SS28RCFN 037103226716 Carded 28 oz 16 in Checkered 2.30 lb 4 

SS28RN 037103226693 Carded 28 oz 16 in Polished 2.30 lb 4 

1088

H A M M E R S 

Autograf Hammers - Premium Curved Claw 

■■High-Luster, Full-Polished 

■■Quality, Red Hickory Handle 


■■Factory Balanced 


Head Weight 


11438 037103114389 Bulk 13 oz 12.5 in Polished 1.18 lb 6 

11436 037103114365 Bulk 16 oz 13 in Polished 1.45 lb 6 


Autograf Hammers - Premium Ripping Claw 

■■High-Luster, Full-Polished Head, Pole, Back and Sides 

■■Quality, Red Hickory Handle 


■■Factory Balanced 


Head Weight 




11442 037103114426 Bulk 22 oz 16 in Checkered 2.00 lb 4 

13 

Hand Drilling Hammer 

■■Black Forged Head 



■■Recommended for Striking Cold Chisels and Brick Chisels 

■■Also for Punches, and Star Drills 

■■Known As the "Stone Cutter’s" Hammer 



Head Weight 

(Ounces) 

Head Weight 

(Pounds) Length Face Diameter Product Weight Shelf Pack Qty. 

11649 037103116499 Bulk 48 oz 3.0 lb 10.75 in 1.25 in 3.46 lb 6 


1089

H A M M E R S 

Double Faced Engineer's Hammers 

■■Forged From High-Quality Steel, Hardened and Tempered 

■■Durable, Flat Black Finish on Head 

■■Two Precision Machined Driving Faces 





Head Weight 

(Ounces) 

Head Weight 

(Pounds) Length Product Weight Shelf Pack Qty. 

11527 037103115270 Bulk 40 oz 2.5 lb 14 in 2.86 lb 6 

11528 037103115287 Bulk 48 oz 3 lb 14 in 3.45 lb 6 

11529NN 037103227164 Bulk 64 oz 4 lb 15.75 in 4.80 lb 6 

Half Hatchets (Octagon Pole) Hickory Handle 

■■Durable, Black Epoxy Finish on Head 

■■Octagon-Shaped Pole 

■■Hardened, Tempered Bit Holds Sharp Cutting Edge 





Head Weight 

(Ounces) Bit Size Length Product Weight Shelf Pack Qty. 

11549 037103115492 Bulk 30 oz 3-5/8 in 13.5 in 2.20 lb 4 

Broad Hatchet 

■■Black Epoxy Finish on Head 

■■Heavy Hatchet Has Broad, Single-Bevel, Cutting Edge 




Head Weight 


11554 037103115546 Bulk 36 oz 4-1/2 in 15.5 in 3.23 lb 4 

1090

H A M M E R S 

Expert California Lathe Hatchet 

■■Full Polished Head 

■■Checkered Striking Face 

■■Thin Blade 




Head Weight 


11544P 037103115447 Bulk 20 oz 2-1/8 in 12.5 in 1.80 lb 4 

Register Hatchet 

■■Full Polished Head 

■■Checkered Face 

■■Sharp Cutting Edge 




Head Weight 


11559P 037103115591 Bulk 28 oz 3-1/2 in 18 in 2.45 lb 4 

13 

Expert Shingling Hatchet 

■■Full-Polished Head 

■■Adjustable Gauge 

■■Checkered Face 

■■Draw Knife Inner Blade 

■■Hickory Handle with Leather Strap 


■■Designed for the Expert Shingler 


Head Weight 


11558 037103115584 Bulk 24 oz 2-1/8 in 13 in 2.20 lb 4 


1091

H A M M E R S 

Ball Pein Hammers, Fiberglass Handle 


■■Dropped Forged Head From Alloy Steel Finished in Black with 

Polished Face, Cheeks, and Pein 

■■Hollow Core Fiberglass Handle Provides Better Balance, 

Absorbs Shock Better Than Solid Fiberglass 

■■Permanent Bond Between Head and Handle 




69-404 781412694048 Bulk 8 oz 0.50 lb 12.500 in Polished 1.04 lb 1 








■■Hickory Handle is Flame Treated, Clear Lacquered, and Securely 

Wedged Into the Hammer Head 

■■Hickory Handle Has A Contoured Shape 


Ball Pein Hammers, Hickory Handle 













Polished Face, Cheeks, and Claw 

■■Hollow Core Fiberglass Handle Provides Better Balance, 

Absorbs Shock Better Than Solid Fiberglass 

■■Permanent Bond Between Head and Handle 


Claw Hammers, Fiberglass Handle 


69-350 781412693508 Bulk 20 oz 14.000 in Polished 1.89 lb 1 

1092

H A M M E R S 



Polished Face, Cheeks, and Claw 



Curved Claw Hammer, Hickory Handle 


69-308 781412693089 Bulk 16 oz 13.000 in Polished 1.37 lb 1 



Polished Face and Bevels 

■■Large Face for Striking Punches, Cold Chisels, Star Drills, Brick 

Chisels, Etc. 

■■Striking Face Has Substantial Bevels to Reduce the Chance of 

Chipping 




Hand Drilling Hammer, Hickory Handle 

Cat. No. UPC No. Packaging Head Weight (Ounces) Head Weight (Pounds) Length Face Diameter Product Weight Shelf Pack Qty. 

69-605 781412696059 Bulk 48 oz 3 lb 10.5 in 1.250 in 3.40 lb 1 



Polished Face, Bevels, and Pein 

■■Large Face for Striking Unhardened Metals. Cross Pein for 

Shaping Soft Metals. 

■■Striking Face and Ends of Pein Have Substantial Bevels to 

Reduce the Chance of Chipping 




Cross Pein Hammers, Hickory Handle 


69-621 781412696219 Bulk 32 oz 2.0 lb 14 in 1.250 in 2.20 lb 1 

69-623 781412696233 Bulk 40 oz 2.5 lb 15 in 1.344 in 2.74 lb 1 

69-625 781412696257 Bulk 48 oz 3 lb 16 in 1.438 in 3.55 lb 1 

13 


1093

H A M M E R S 



Polished Face and Bevels 

■■Large Face Commonly Used with Slugging / Striking Wrenches, 

Stone, Concrete, and Metal 

■■Striking Face Has Substantial Bevels to Reduce the Chance of 

Chipping 




Double Face Sledge Hammers, Hickory Handle 

Cat. No. UPC No. Packaging Face Diameter Handle Length Weight Product Weight Shelf Pack Qty. 

69-643 781412696431 Bulk 1.375 in 15.500 2-1/2 lb 2.88 lb 1 

69-645 781412696455 Bulk 1.500 in 16.000 3 lb 3.48 lb 1 

69-647 781412696479 Bulk 1.750 in 16.000 4 lb 4.50 lb 1 

69-649 781412696493 Bulk 2.125 in 36.000 6 lb 9.28 lb 1 

69-651 781412696516 Bulk 2.250 in 36.000 8 lb 9.00 lb 1 

69-653 781412696530 Bulk 2.500 in 36.000 10 lb 11.00 lb 1 

69-655 781412696554 Bulk 2.625 in 36.000 12 lb 13.00 lb 1 


Dead Blow Ball Pein Hammers 


■■Steel Shot Filled Canister Creates a Dead Blow Effect; Sustains 

Impact, Maximizes Force , Reduces / Eliminates Rebound, and 

Absorbs the Shock of Impact 

■■Hot Cast Urethane Covers Steel Shot Chamber and Steel 

Reinforced Handle 

■■Steel Face and Pein Allow for Conventional Use in Striking 

Punches and Chisels as well as Shaping and Straightening 

Unhardened Metals 

■■Steel Reinforced Handle Provides Added Strength and Safety By 

Resisting Breaking on Overstrike 

■■Textured Handle with a Flanged Butt End for a Sure Non-Slip 

Grip 

■■Safety Red Urethane for High Visibility 

Cat. No. UPC No. Packaging Length Head Length Face Diameter Face Finish Product Weight Shelf Pack Qty. 

68-516 781412685169 Bulk 12.750 in 4.188 in 1.000 in Polished 1.00 lb 1 




1094

H A M M E R S 

Standard Head One-Piece Dead Blow Hammers 


■■Steel Shot Filled Canister Creates A Dead Blow Effect; Sustains 



■■Non-Sparking Hot Cast Urethane Covers Steel Shot Chamber 

and Steel Reinforced Handle; No Exposed Metal 

■■Hot Cast Urethane Face Will Not Mar Surfaces or Absorb 

Liquids. Resists Chipping and Splitting While Reducing Noise 

When Striking Metal Objects 




Grip 


■■Meets or Exceeds US Federal Spec. GGG-H-33A 


69-530 781412695304 Bulk 10.125 in 3.125 in 1.250 in Urethane 0.10 lb 1 





Slimline One-Piece Dead Blow Hammers 







■■Unique Slim Profile Hot Cast Urethane Face Will Not Mar 

Surfaces or Absorb Liquids. Resists Chipping and Splitting While 

Reducing Noise When Striking Metal Objects 




Grip 








13 


1095

H A M M E R S 







■■Unique Super Slim, Super Deep Profile Hot Cast Urethane Face 

is Designed for Used in Cylinder / Pistons and Will Not Mar 

Surfaces or Absorb Liquids. Resists Chipping and Splitting While 

Reducing Noise When Striking Metal Objects 


Deep Throat One-Piece Dead Blow Hammers 









■■Hot Cast Urethane Sledge Head Face Will Not Mar Surfaces or 

Absorb Liquids. Resists Chipping and Splitting While Reducing 

Noise When Striking Metal Objects Such As Slugging / Striking 

Wrenches 


Sledge Head One-Piece Dead Blow Hammers 







Powerdrive Dead Blow Hammers, Fiberglass Handle 


■■Steel Shot Filled Canister Creates a Dead Blow Effect; Sustains 



■■Non-Sparking Thermoplastic Head Material Covers Steel Shot 

Chamber and Will Not Mar Surfaces 

■■Fiberglass Handle Provides Balance and is Permanently Bonded 

to the Head 



Cat. No. UPC No. Packaging Length Face Diameter Face Finish Product Weight Shelf Pack Qty. 

69-501 781412695014 Bulk 18.630 in 1.875 in Urethane 1.40 lb 1 




1096

H A M M E R S 


■■Solid, Non-Sparking, Non-Marring Rubber Head 


to the Head 



Rubber Mallet, Fiberglass Handle 

Cat. No. UPC No. Packaging Length Head Length Product Weight Shelf Pack Qty. 

69-490 781412694901 Bulk 1.630 in 3.875 in 1.72 lb 1 


■■Soft Brass Head is Non-Sparking, Surface Protective to Prevent 

Work Surface Damage 

■■Ideal for Driving Bushings and Gears As Well As Near 

Combustible Materials 

■■Striking Face is Machined Flat for Even Blow Distribution 


to the Head 



Brass Hammers, Fiberglass Handle 

Cat. No. UPC No. Packaging Length Face Diameter Handle Length Product Weight Shelf Pack Qty. 

69-513 781412695137 Bulk 16.000 in 1.063 in 12.000 in 2.09 lb 1 

69-515 781412695151 Bulk 16.000 in 1.500 in 12.000 in 2.84 lb 1 

69-517 781412695175 Bulk 16.000 in 1.875 in 12.000 in 3.84 lb 1 

13 

Brass Hammers, Hickory Handle 


■■Soft Brass Head is Non-Sparking, Surface Protective to Prevent 

Work Surface Damage 







81-110 781412811100 Bulk 10.500 in 1.000 in 10.500 in 0.66 lb 1 

81-111 781412811117 Bulk 10.500 in 1.250 in 10.500 in 1.17 lb 1 

81-112 781412811124 Bulk 13.000 in 1.500 in 13.000 in 2.42 lb 1 


1097

H A M M E R S 

Copper Hammers, Hickory Handle 


■■Soft Copper Head is Non-Sparking, Surface Protective to 

Prevent Work Surface Damage 







69-480 781412694802 Bulk 13.438 in 1.250 in 11.250 in 0.00 lb 1 

69-485 781412694857 Bulk 13.500 in 1.630 in 11.250 in 2.37 lb 1 


■■Hammer Heads Are Designed to Accept A Variety of Threaded 

Soft Face Tips to Customize to Various Applications 


to the Head 



Soft Face Hammers, Fiberglass Handle 


Cat. No. UPC No. Packaging Head Length Thread Size Handle Length Product Weight Shelf Pack Qty. 

69-001 781412690019 Bulk 2 in 1/4-20 11.375 in 0.37 lb 1 

69-003 781412690033 Bulk 2.000 in 1/4-20 11.375 in 0.50 lb 1 

69-009 781412690095 Bulk 2.375 in 5/16-18 13.000 in 0.47 lb 1 

69-011 781412690118 Bulk 4.500 in 5/16-18 13.000 in 0.00 lb 1 

69-013 781412690132 Bulk 2.375 in 5/16-18 13.000 in 1.06 lb 1 

69-017 781412690170 Bulk 2.500 in 3/8-16 13.000 in 1.10 lb 1 

69-019 781412690194 Bulk 2.500 in 3/8-16 13.000 in 1.75 lb 1 

69-025 781412690255 Bulk 3.250 in 7/16-14 15.000 in 1.76 lb 1 

69-027 781412690279 Bulk 3.250 in 7/16-14 13.000 in 3.38 lb 1 

69-031 781412690316 Bulk 3.750 in 1/2-13 14.000 in 2.50 lb 1 

69-033 781412690330 Bulk 3.750 in 1/2-13 14.000 in 4.85 lb 1 


■■Hammer Heads Are Designed to Accept A Variety of Threaded 

Soft Face Tips to Customize to Various Applications 





to the Head 



Dead Blow Soft Face Hammers, Fiberglass Handle 

Cat. No. UPC No. Packaging Head Length Thread Size Handle Length Product Weight Shelf Pack Qty. 

69-065 781412690651 Bulk 6.250 in 5/16"-18 6.250 in 1.30 lb 1 

69-069 781412690699 Bulk 8.625 in 3/8"-16 8.625 in 1.87 lb 1 

1098

H A M M E R S 

Soft Face Hammer Tips 


■■Soft Face Tips Are Color Coded to Indicate Degree of Hardness 

■■Tips Thread Directly Into Hammer Head and Seat in Head 

Through A Friction Fit 

■■Tips Will Not Mar Surfaces or Absorb Liquids 

■■Resists Chipping and Splitting While Reducing Noise When 

Striking Metal Objects 


Cat. No. UPC No. Packaging Diameter Thread Size Hardness Color Hardness Conversion 

69-141 781412691412 Bagged 1.00 in 1/4-20 Super Soft Gray Soft Rubber 0.05 lb 1 

69-142 781412691429 Bagged 1.00 in 1/4-20 Soft Brown Soft Rubber, Soft Lead, Wood 0.05 lb 1 

69-143 781412691436 Bagged 1.00 in 1/4-20 Medium Red Wood, Rubber, Rawhide, Brass 0.05 lb 1 

69-145 781412691450 Bagged 1.00 in 1/4-20 Tough Green Rawhide, Hardwood, Plactic, Lead 0.04 lb 1 

69-146 781412691467 Bagged 1.00 in 1/4-20 Med. Hard Cream Rawhide, Hardwood, Lead 0.04 lb 1 

69-148 781412691481 Bagged 1.00 in 1/4-20 Hard Black Rawhide, Plastic, Micarta, Fiber 0.04 lb 1 

69-149 781412691498 Bagged 1.00 in 1/4-20 Extra Hard Yellow Rawhide, Micarta, Fiber, Copper 0.04 lb 1 





























Product 

Weight 

Shelf Pack 

Qty. 

13 


1099

H A M M E R S 

Hammer Set 

■■Popular starter set of Hammers and mallets 

■■Soft face, Rubber Mallet, Drilling Hammer and Ball Pein 

■■Precision Hardened Striking Face 

■■Durable Storage Tray 

■■Fiberglass Handle 

■■Molded Comfort Grip Handle 

■■5-Piece Hammer Set 


82303 099575823039 11.53 lb 1 


82251 16 oz Ball Pein Hammer - Fiberglass 82259 16 oz Rubber Mallet - Wood Hickory Handle 

82255 3 lb Drilling Hammer 82260 12 oz Soft face Hammer, Removable Caps 

82256 16 oz Dead Blow Hammer - Composite Handle 

Ball Pein Hammers 







82250 099575822506 Bulk 8.0 oz 0.5 lb 11.8 in Polished 0.80 lb 1 




■■For Driving Nails 

■■All Types of General Construction 

■■Not for Punches and Chisels 

Curved Claw Hammer - Fiberglass 



1100

H A M M E R S 

■■Heavy Duty Uses with Punches, Chisels, and Star Drills 

Drilling Hammer 


82255 099575822551 Bulk 48 oz 3 lb 10.51 in 1.38 in 3.52 lb 1 

■■Forged Steel Alloy Head 

■■Fully Polished Face 

■■Precision Hardened Striking Face 

■■Fiberglass Handle 

■■Comfort Grip Handle 


Engineer's Hammer 


82289 099575822896 Bulk 48 oz 3 lb 10.31 in 1.09 in 3.73 lb 1 

■■Composite Handle 

■■Assembly, Maintenance, Production Applications 

Dead Blow Hammers 

13 


Head Weight 

(Ounces) Head Length Face Diameter Face Finish Product Weight Shelf Pack Qty. 

82256 099575822568 Bulk 16 oz 3.5 in 1.6 in Composite 1.13 lb 1 




1101

H A M M E R S 

■■Solid Hickory Handle 

Rubber Mallet - Wood Hickory Handle 

Cat. No. UPC No. Packaging Head Weight (Ounces) Product Weight Shelf Pack Qty. 

82259 099575822599 Bulk 16 oz 1.22 lb 1 

■■Light Assembly Applications 


Soft Face Hammer 

Cat. No. UPC No. Packaging Head Weight (Ounces) Head Length Thread Size Handle Length Product Weight Shelf Pack Qty. 

82260 099575822605 Bulk 12 oz 4 in 5/16-18 11 in 1.11 lb 1 


■■General Body Tool and Dolly Set 

■■Hickory Handles 

■■Fine Polished Surfaces on Dollys 

■■Soft and Cross Faced Striking Surfaces 

■■Includes a Storage Case 

Body Tool Set 


82302 099575823022 Carry Case 12.35 lb 1 


- Smooth Faced Bumping Hammer W/ Square & Round Face - Toe Dolly 

- Smooth Faced Cross Chisel Hammer - Wedge Dolly 

- Crossed Face Shrinking Hammer - Heel Dolly 

- General Purpose Dolly 

1102

P U N C H E S & C H I S E L S 

27 Pc. Punch and Chisel Set 

■ Made in the USA - Quality and Availability 

■ Manufactured From High Alloy Steel for Strength and Durability 

■ Heat Treated for Strength and Durability 

■ Cutting Edges and Tips Are Ground to Precise Angles and 

Tolerances for Performance and Long Life 

■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder 

■ Hex Stock Fits More Securely in A Punch & Chisel Holder and 

Also Reduces the Tendency to Roll on Work Surfaces 


70-568 781412705683 Boxed 9.84 lb 1 


70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 70-197 Drift Punch 1/4" x 5/8" x 11" 70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-105 Pin Punch 1/8" x 5/16" x 5" 70-129 Pin Punch 7/32" x 3/8" x 7" 70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 70-163 Starting Punch 7/32" x 1/2" x 5-1/2" 70-313 Cold Chisel 3/4" x 5/8" x 7" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 70-189 Drift Punch 1/8" x 3/8" x 8" 70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-131 Pin Punch 1/4" x 3/8" x 7" 70-235 Center Punch 3/8" x 5" 70-317 Cold Chisel 1" x 7/8" x 8" 

70-155 Starting Punch 3/32" x 5/16" x 4-1/2" 70-239 Center Punch 1/2" x 6" 70-319 Cold Chisel 1-1/8" x 7/8" x 8" 

70-157 Starting Punch 1/8" x 5/16" x 4-1/2" 70-255 Prick Punch 3/8" x 5" 70-000 Punch and Chisel Holder 

70-161 Starting Punch 3/16" x 3/8" x 5" 70-301 Cold Chisel 1/4" x 1/4" x 5" 29-403 Vinyl Roll 27 Pockets 

70-165 Starting Punch 1/4" x 1/2" x 6" 70-303 Cold Chisel 1/4" x 1/4" x 5" 

70-193 Drift Punch 3/16" x 1/2" x 9" 70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 

13 











70-567 781412705676 Boxed 9.10 lb 1 


70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 70-165 Starting Punch 1/4" x 1/2" x 6" 70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-105 Pin Punch 1/8" x 5/16" x 5" 70-193 Drift Punch 3/16" x 1/2" x 9" 70-313 Cold Chisel 3/4" x 5/8" x 7" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 70-197 Drift Punch 1/4" x 5/8" x 11" 70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-131 Pin Punch 1/4" x 3/8" x 7" 70-199 Drift Punch 5/16" x 5/8" x 11" 70-317 Cold Chisel 1" x 7/8" x 8" 

70-155 Starting Punch 3/32" x 5/16" x 4-1/2" 70-201 Drift Punch 3/8" x 3/4" x 11" 70-000 Punch and Chisel Holder 

70-157 Starting Punch 1/8" x 5/16" x 4-1/2" 70-239 Center Punch 1/2" x 6" 29-402 Vinyl Roll 19 Pockets 

70-161 Starting Punch 3/16" x 3/8" x 5" 70-309 Cold Chisel 1/2" x 7/16" x 6" 


1103












70-565 781412705652 Boxed 1.64 lb 1 


70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 70-161 Starting Punch 3/16" x 3/8" x 5" 70-393 Cape Chisel 7/32" x 5/16" x 5-5/8" 

70-105 Pin Punch 1/8" x 5/16" x 5" 70-235 Center Punch 3/8" x 5" 70-421 Diamond Point Chisel 3/16" x 3/8" x 5-1/2" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 70-303 Cold Chisel 1/4" x 1/4" x 5" 29-404 Vinyl Roll 12 Pockets 

70-153 Starting Punch 1/16" x 5/16" x 4-1/2" 70-307 Cold Chisel 7/16" x 3/8" x 6" 

70-157 Starting Punch 1/8" x 5/16" x 4-1/2" 70-309 Cold Chisel 1/2" x 7/16" x 6" 


5 Pc. Tool Steel Cold Chisel Set 


■ Manufactured From Shock Resistant Tool Steel for Unequalled 

Strength, Toughness, and Durability; Higher Hardness 

Without Brittleness 

■ Full Shank Heat Treat is A 2 Step Process Where the Entire 

Length of the Tool is Hardened and Tempered, Then the Struck 

End is Drawn Back for to Resist Mushrooming" and "Chipping" 

Extending the Life of the Tool" 

■ Cutting Edges Are Ground to Precise Angles for Efficient Cutting 

and Long Live 

■ Modified Parabolic Head Directs the Striking Force to the Center 

of the Tool for Greater Resistance to "Mushrooming" 

and "Chipping" 





70-560 781412705607 Boxed 2.64 lb 1 


70-325 Tool Steel Cold Chisel 3/8" x 5/16" x 5-1/2" 70-333 Tool Steel Cold Chisel 3/4" x 5/8" x 7" 

70-329 Tool Steel Cold Chisel 1/2" x 7/16" x 6" 70-335 Tool Steel Cold Chisel 7/8" x 3/4" x 7-1/2" 

70-331 Tool Steel Cold Chisel 5/8" x 1/2" x 6-1/2" 29-407 Vinyl Roll 5 Pockets 

1104


10 Pc. Cold Chisel Set 





and Long Life 





70-563 781412705638 Boxed 5.50 lb 1 


70-301 Cold Chisel 1/4" x 1/4" x 5" 70-309 Cold Chisel 1/2" x 7/16" x 6" 70-317 Cold Chisel 1" x 7/8" x 8" 

70-303 Cold Chisel 1/4" x 1/4" x 5" 70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 70-319 Cold Chisel 1-1/8" x 7/8" x 8" 

70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 70-313 Cold Chisel 3/4" x 5/8" x 7" 29-405 Vinyl Roll 10 Pockets 

70-307 Cold Chisel 7/16" x 3/8" x 6" 70-315 Cold Chisel 7/8" x 3/4" x 7-1/2" 






and Long Life 




13 


70-562 781412705621 Boxed 2.80 lb 1 



70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 70-313 Cold Chisel 3/4" x 5/8" x 7" 


70-309 Cold Chisel 1/2" x 7/16" x 6" 29-406 Vinyl Roll 7 Pockets 


1105







and Long Life 





70-564 781412705645 Boxed 1.16 lb 1 


70-303 Cold Chisel 1/4" x 1/4" x 5" 70-309 Cold Chisel 1/2" x 7/16" x 6" 

70-305 Cold Chisel 3/8" x 5/16" x 5-1/8" 70-311 Cold Chisel 5/8" x 1/2" x 6-1/2" 

70-307 Cold Chisel 7/16" x 3/8" x 6" 29-407 Vinyl Roll 5 Pockets 


19 Pc. Punch Set 




■ Various Punch Tips Are Precision Ground for Specific 

Performance and Long Life 





70-550 781412705508 Boxed 5.30 lb 1 


29-401 Vinyl Roll 19 Pockets 70-157 Starting Punch 1/8" x 5/16" x 4-1/2" 70-193 Drift Punch 3/16" x 1/2" x 9" 

70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 70-159 Starting Punch 5/32" x 3/8" x 5" 70-197 Drift Punch 1/4" x 5/8" x 11" 

70-105 Pin Punch 1/8" x 5/16" x 5" 70-161 Starting Punch 3/16" x 3/8" x 5" 70-235 Center Punch 3/8" x 5" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 70-165 Starting Punch 1/4" x 1/2" x 6" 70-239 Center Punch 1/2" x 6" 

70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 70-167 Starting Punch 5/16" x 1/2" x 6" 70-255 Prick Punch 3/8" x 5" 

70-131 Pin Punch 1/4" x 3/8" x 7" 70-133 Pin Punch 5/16" x 7/16" x 7" 70-000 Punch and Chisel Holder 

70-155 Starting Punch 3/32" x 5/16" x 4-1/2" 70-189 Drift Punch 1/8" x 3/8" x 8" 

1106


10 Pc. Tool Steel Pin Punch Set 



Strength, Toughness, and Durability; Higher Hardness Without 

Brittleness 





■ Pin Area Precision Ground to Prevent Any "Binding" in Work 

Area 

■ Modified Parabolic Head Directs the Striking Force to the 

Center of the Tool for Greater Resistance to "Mushrooming" and 

"Chipping" 





70-552 781412705522 Boxed 2.005 lb 1 


70-110 Tool Steel Pin Punch 1/16" x 1/4" x 4" 70-118 Tool Steel Pin Punch 3/16" x 3/8" x 5-1/4" 70-126 Tool Steel Pin Punch 5/16" x 7/16" x 6" 

70-112 Tool Steel Pin Punch 3/32" x 5/16" x 4-1/2" 70-120 Tool Steel Pin Punch 7/32" x 3/8" x 5-1/2" 70-128 Tool Steel Pin Punch 3/8" x 1/2" x 6" 

70-114 Tool Steel Pin Punch 1/8" x 5/16" x 4-3/4" 70-122 Tool Steel Pin Punch 1/4" x 3/8" x 5-3/4" 29-405 Vinyl Roll 10 Pockets 

70-116 Tool Steel Pin Punch 5/32" x 5/16" x 5" 70-124 Tool Steel Pin Punch 9/32" x 3/8" x 5-3/4" 

7 Pc. Tool Steel Pin Punch Set 




Brittleness 





■ Pin Area Precision Ground to Prevent Any "Binding" in Work 

Area 



"Chipping" 





70-553 781412705539 Boxed 1.12 lb 1 


70-110 Tool Steel Pin Punch 1/16" x 1/4" x 4" 70-118 Tool Steel Pin Punch 3/16" x 3/8" x 5-1/4" 

70-112 Tool Steel Pin Punch 3/32" x 5/16" x 4-1/2" 70-120 Tool Steel Pin Punch 7/32" x 3/8" x 5-1/2" 

70-114 Tool Steel Pin Punch 1/8" x 5/16" x 4-3/4" 70-122 Tool Steel Pin Punch 1/4" x 3/8" x 5-3/4" 

70-116 Tool Steel Pin Punch 5/32" x 5/16" x 5" 29-406 Vinyl Roll 7 Pockets 

13 


1107


5 Pc. Tool Steel Long Pin Punch Set 




Brittleness 





■ Pin Area Precision Ground to Prevent Any "Binding" 

in Work Area 








70-556 781412705560 Boxed 1.18 lb 1 


70-042 Tool Steel Long Pin Punch 5/32" x 5/16" x 8" 70-045 Tool Steel Long Pin Punch 1/4" x 3/8" x 8" 

70-043 Tool Steel Long Pin Punch 3/16" x 3/8" x 8" 70-047 Tool Steel Long Pin Punch 5/16" x 7/16" x 8" 

70-044 Tool Steel Long Pin Punch 7/32" x 3/8" x 8" 29-407 Vinyl Roll 5 Pockets 


7 Pc. Pin Punch Set 





in Work Area 





70-554 781412705546 Boxed 1.15 lb 1 


70-101 Pin Punch 1/16" x 1/4" x 4-1/4" 70-109 Pin Punch 3/16" x 3/8" x 5-1/4" 

70-103 Pin Punch 3/32" x 5/16" x 4-3/4" 70-129 Pin Punch 7/32" x 3/8" x 7" 

70-105 Pin Punch 1/8" x 5/16" x 5" 70-131 Pin Punch 1/4" x 3/8" x 7" 

70-107 Pin Punch 5/32" x 5/16" x 5-1/4" 29-406 Vinyl Roll 7 Pockets 

1108


7 Pc. Roll Pin Punch Set 




■ Ball Area in the Center of the Tip Fits Inside the Roll Pin to 

Prevent Damage to the Roll Pin 





70-557 781412705577 Boxed 0.68 lb 1 


70-260 Roll Pin Punch 1/16" x 1/4" x 2-3/4" 70-268 Roll Pin Punch 3/16" x 3/8" x 4-1/2" 

70-262 Roll Pin Punch 3/32" x 1/4" x 3-1/2" 70-270 Roll Pin Punch 7/32" x 3/8" x 5" 

70-264 Roll Pin Punch 1/8" x 1/4" x 4" 70-272 Roll Pin Punch 1/4" x 7/16" x 5-1/2" 

70-266 Roll Pin Punch 5/32" x 1/4" x 4-1/2" 29-406 Vinyl Roll 7 Pockets 

5 Pc. Drift Punch Set 




■ Flat Tip with Precision Ground Taper is Used for Installing and 

Removing Pins and Shafts and Can Also Be Used to Align Holes 

in Multiple Pieces of Material 




13 


70-559 781412705591 Boxed 1.00 lb 1 


70-189 Drift Punch 1/8" x 3/8" x 8" 70-197 Drift Punch 1/4" x 5/8" x 11" 

70-193 Drift Punch 3/16" x 1/2" x 9" 70-199 Drift Punch 5/16" x 5/8" x 11" 

70-195 Drift Punch 7/32" x 1/2" x 9-1/2" 29-407 Vinyl Roll 5 Pockets 


1109


3 Pc. Brass Pin Punch Set 


■ Non Marring - Ideal for Work Where A Strong Positive Blow 

is Necessary Without Damaging the Work Surface 

■ Non-Sparking; Ideal for Working on Heavy Equipment, in Mines 

and Explosive Atmospheres Where Spark Free" is Required" 


in Work Area 


70-546 781412705461 Boxed 0.83 lb 1 


70-295 Brass Pin Punch 1/4" x 4" 70-297 Brass Solid Punch 1/4" x 6" 

70-296 Brass Pin Punch 3/8" x 6" 

3 Pc. Brass Drift Punch Set 


■ Non Marring - Ideal for Work Where A Strong Positive Blow is 

Necessary Without Damaging the Work Surface 



■ Flat Tip is Used for Installing and Removing Pins and Shafts and 

Can Also Be Used to Align Holes in Multiple Pieces of Material 


70-545 781412705454 Boxed 1.79 lb 1 



70-294 Brass Drift Punch 3/8" x 6" 70-291 Brass Drift Punch 3/4" x 8" 


Punch and Chisel Holder 


■ Safety; Protects Against Hand Injury 

■ Holds Punches & Chisels Up to 1-1/16" Hex Stock 

■ V Head Effectively Traps the Punch or Chisel Securely on 3 

Sides Reducing the Risk of Injury 

■ Tri-Oval Shaped Handle Conforms to the Hand Increasing 

Operator Comfort, Reducing Operator Fatigue 

Cat. No. UPC No. Packaging Overall Length Min Overall Length Max Product Weight Shelf Pack Qty. 

70-000 781412700008 Bagged 7.500 in 8.750 in 0.71 lb 1 

1110


Tool Steel Cold Chisels 










and Long Life 







■ Meets or Exceeds ASME B209.1 and Us Federal Spec. 

GGG-C-313C 

Cat. No. UPC No. Packaging Width of Cut Stock Size Overall Length Product Weight Shelf Pack Qty. 

70-325 781412703252 Bagged 3/8 in 5/16 in 5.500 in 0.12 lb 1 





70-337 781412703375 Bagged 1 in 7/8 in 8.000 in 1.24 lb 1 

Cold Chisels 





and Long Life 














70-319 781412703191 Bagged 1-1/8 in 7/8 in 8.000 in 1.32 lb 1 

13 


1111


Extra Long Cold Chisels 





and Long Life 










Rivet Busters 


■ Designed for Shearing Rivets 




and Long Life 






Cape Chisels 


■ Designed for Cutting Slots or Keyways 




and Long Life 










1112


Round Nose Chisels 


■ Designed for Cutting Round or U-Grooves 




and Long Life 









Diamond Point Chisels 


■ Designed to Clean Out Inside Corners and to Cut V-Grooves 




and Long Life 




13 








1113


Tool Steel Pin Punch 










in Work Area 



"Chipping" 




■ Meets or Exceeds ASME B107.48M and Us Federal Spec. 

GGG-P-831F 


Cat. No. UPC No. Packaging Point Diameter Stock Size Overall Length Product Weight Shelf Pack Qty. 











1114


Tool Steel Long Pin Punch 










in Work Area 







■ Meets or Exceeds ASME B107.48M and Us Federal Spec. 

GGG-P-831F 









Brass Pin Punch 







in Work Area 




13 


1115


Brass Drift Punches 


■ Non Marring - Ideal for Work Where A Strong Positive Blow is 

Necessary Without Damaging the Work Surface 









Pin Punches 





in Work Area 














1116


Roll Pin Punches 




■ Ball Area in the Center of the Tip Fits Inside the Roll Pin to 

Prevent Damage to the Roll Pin 















Drift Punches 





Removing Pins and Shafts and Can Also Be Used to Align Holes 

in Multiple Pieces of Material 













13 


1117


Long Aligning Punch 




■ Flat Tip with Precision Ground Taper is Used to Align Holes in 

Multiple Pieces of Material 






Starting Punches 





Removing Pins and Shafts 














Center Punches 




■ In Metal Working Layout, Pointed Tip is Used for Marking 

Intersecting Center Lines, Hole Locations, and Pilot Drill 

Starting Points 




Cat. No. UPC No. Packaging Stock Size Overall Length Product Weight Shelf Pack Qty. 

70-231 781412702316 Bagged 1/4 in 4.250 in 0.06 lb 1 

70-233 781412702330 Bagged 5/16 in 4.375 in 0.09 lb 1 

70-235 781412702354 Bagged 3/8 in 5.000 in 0.13 lb 1 

70-237 781412702378 Bagged 7/16 in 5.500 in 0.21 lb 1 

70-239 781412702392 Bagged 1/2 in 6.000 in 0.27 lb 1 

70-241 781412702415 Bagged 5/8 in 6.250 in 0.51 lb 1 

1118


Prick Punches 




■ In Sheet Metal Layout, Pointed Tip is Used for Scribing and for 

Punching and Marking Holes for Sheet Metal Screws 





70-251 781412702514 Bagged 1/4 in 4.000 in 0.06 lb 1 

70-253 781412702538 Bagged 5/16 in 4.500 in 0.09 lb 1 

70-255 781412702552 Bagged 3/8 in 5.000 in 0.13 lb 1 

70-257 781412702576 Bagged 1/2 in 6.000 in 0.28 lb 1 

Brass Taper Punch 










13 

Brass Solid Punch 











1119


■■Chisel for Cutting Rivets, Bolts, and Nuts 

■■Pin Punch for Final Removal to Drive Out Pins and Rivets 

■■Center Punch for Marking Center Lines and Pilot Drill Locations 

■■Long Taper Punch to Install and Remove Pins and Shafts and to 

Align Holes 

■■Starter Punch for Both Starting and Installing Pins and Rivets 



82306 099575823060 Bagged 9.29 lb 1 



82261 1/4" x 4-3/4" x 1/4" Cold Chisel 82275 3/16" x 5-1/2" x 5/16" Pin Punch 

82262 3/8" x 5" x 5/16" Cold Chisel 82276 1/4" x 7" x 3/8" Pin Punch 

82263 7/16" x 5-1/2" x 3/8" Cold Chisel 82277 5/16" x 7" x 1/2" Pin Punch 

82264 1/2" x 6" x 3/8" Cold Chisel 82278 1/8" x 8" x 3/8" Long Taper Punch 

82265 5/8" x 6-1/2" x 3/8" Cold Chisel 82279 5/32" x 8-1/2" x 1/2" Long Taper 

82266 3/4" x 7" x 5/8" Cold Chisel 82280 3/16" x 9" x 1/2" Long Taper Punch 

82267 7/8" x 7-1/2" x 3/4" Cold Chisel 82281 1/4" x 11" x 5/8" Long Taper Punch 

82268 1" x 8" x 7/8" Cold Chisel 82282 5/32" x 5" x 3/8" Starter Punch 

82269 1/4" x 4-1/4" Center Punch 82283 3/16" x 5" x 3/8" Starter Punch 

82270 3/8" x 5" Center Punch 82284 1/4" x 6" x 1/2" Starter Punch 

82271 7/16" x 5-1/2" Center Punch 82285 1/8" x 4-1/2" x 5/16" Starter 

82272 3/32" x 4-3/4" x 5/16" Pin Punch 82286 5/16" x 7" x 5/8" Starter Punch 

82273 1/8" x 5" x 5/16" Pin Punch 82287 3/8" x 8" x 3/4" Starter Punch 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 

1120





■■Long Taper Punch to Install and Remove Pins and Shafts and to 

Align Holes 

■■Starter Punch for Both Starting and Installing Pins and Rivets 



82305 099575823053 Bagged 1.97 lb 1 


82261 1/4" x 4-3/4" x 1/4" Cold Chisel 82273 1/8" x 5" x 5/16" Pin Punch 

82262 3/8" x 5" x 5/16" Cold Chisel 82274 5/32" x 5-1/4" x 5/16" Pin Punch 


82265 5/8" x 6-1/2" x 3/8" Cold Chisel 82278 1/8" x 8" x 3/8" Long Taper Punch 

82270 3/8" x 5" Center Punch 82283 3/16" x 5" x 3/8" Starter Punch 

82272 3/32" x 4-3/4" x 5/16" Pin Punch 82285 1/8" x 4-1/2" x 5/16" Starter 





13 


82304 099575823046 Bagged 0.61 lb 1 



82270 3/8" x 5" Center Punch 82275 3/16" x 5-1/2" x 5/16" Pin Punch 

82273 1/8" x 5" x 5/16" Pin Punch 


1121



■■Designed to Cut Metal Such As Wrought Iron, Steel, Brass, and 

Aluminum 

■■For Cutting Rivets, Bolts, and Nuts 


82308 099575823084 Bagged 1.35 lb 1 


82263 7/16" x 5-1/2" x 3/8" Cold Chisel 82265 5/8" x 6-1/2" x 3/8" Cold Chisel 

82264 1/2" x 6" x 3/8" Cold Chisel 82266 3/4" x 7" x 5/8" Cold Chisel 

■■Used For Final Removal to Drive out Pins and Rivets 

■■Softened and Tapered Striking end reduces potential to chip 

■■Ground surface for ease of identification 

■■Precision Harded working ends 

5 Pc. Pin Punch Set 



82309 099575823091 Bagged 0.78 lb 1 


82273 1/8" x 5" x 5/16" Pin Punch 82276 1/4" x 7" x 3/8" Pin Punch 

82274 5/32" x 5-1/4" x 5/16" Pin Punch 82277 5/16" x 7" x 1/2" Pin Punch 

82275 3/16" x 5-1/2" x 5/16" Pin Punch 

■■Used to Install and Remove Pins and Shafts and to Align Holes 

4 Pc. Long Taper Punch Set 


82307 099575823077 Bagged 1.72 lb 1 


82278 1/8" x 8" x 3/8" Long Taper Punch 82280 3/16" x 9" x 1/2" Long Taper Punch 

82279 5/32" x 8-1/2" x 1/2" Long Taper 82281 1/4" x 11" x 5/8" Long Taper Punch 

1122


Cold Chisels 

■■Designed to Cut Metal Such As Wrought Iron, Steel, Brass, and 

Aluminum 

■■For Cutting Rivets, Bolts, and Nuts 



82261 099575822612 Bagged 1/4 in 1/4 in 4-3/4 in 0.08 lb 1 

82262 099575822629 Bagged 3/8 in 5/16 in 5 in 0.13 lb 1 






82268 099575822681 Bagged 1 in 7/8 in 8 in 1.29 lb 1 

■■Used for Marking Center Lines and Pilot Drill Locations 


Center Punches 


82269 099575822698 Bagged 1/4 in 4-1/4 in 0.06 lb 1 

82270 099575822704 Bagged 3/8 in 5 in 0.13 lb 1 

82271 099575822711 Bagged 7/16 in 5-1/2 in 0.20 lb 1 

■■Used for Final Removal to Drive Out Pins and Rivets 


Pin Punches 

13 








Long Taper Punches 

■■Used to Install and Remove Pins and Shafts and to Align Holes 








1123


■■Designed for Both Starting and Installing Pins and Rivets 


Starter Punches 









1124

P R Y B A R S & D E M O L I T I O N 

Indexing Pry Bars.............................. 1128 

Adjustable Pry Bars........................... 1128 

Molding Bars...................................... 1128 

Nail Pullers......................................... 1129 

Indexing Pry Bars.............................. 1130 

Extendable Pry Bars.......................... 1131 

Nail Pulling Pry Bar........................... 1131 

14 

Pry Bar Sets....................................... 1132 

Pry Bars............................................. 1132 

Rolling Head Pry Bars....................... 1133 

Rebar Benders................................... 1134 

P R Y B A R S / D E M O L I T I O N 

1125


Pry Bars 

Tackle your next project with the latest innovations from Crescent ® , the brand recognized by professionals for superior strength and 

quality for over 100 years. Code Red TM renovation and demolition tools are designed around powerful innovations that allow you 

to attack renovation projects from the best angle, adjust your tool to fit the task, and get the job done faster and easier. And don’t 

worry – they’re all built to survive the toughest demolition jobs. 

90° angled flat head offers better 

access and wider support for 

prying against surfaces 

Jaws open up 5.5" 

in 1/2" increments 

Raised surface on the 

back of the head provides 

location for users to strike 

Head indexes over 

180° and locks into 

16 positions for 

increased access 

P R Y B A R S / D E M O L I T I O N 14 

Pressing the extension button allows 

the jaws to slide and clamp onto 

boards and other materials for pulling, 

prying and straightening 

Extendable jaws provide increased 

access and force for pulling longer 

nails 

Hammer style head for 

striking and persuading 

nails, boards, etc. 

Curved bar end provides 

maximum strength ideal for 

increased prying leverage 

Two-tone rubber 

grip allows for 

comfort and safety 

1126


Pry Bars 

The GearWrench ® Indexing Pry Bar Program has changed the way prybars are used. The indexing head can get to where others 

can’t and perform at 2x ANSI standards for safety and reliability. Offered in both standard and extendable handles, these prybars 

are a must for every box…and fit in the drawers too for easy secure storage. 

INDEXING PRY BARS 

Exceeds ANSI requirements for 

proven strength 

Indexible to 180° 

for greater leverage 

Puts the pry bar where you 

need it for best leverage 

14 locking positions 

for unmatched access 

Extends from 29" to 48" 

Grooved profile adds traction 

on 24", 33" and extendable models 

Push button to 

extend reach 

Extendable pry bar 

collapses so you can 

store it securely in 

your tool box 

14 

Pry Bars 

Armstrong ® offers a wide variety of professional Pry, Aligning, and Rolling Head Bars for just about any application. All are made to 

exacting standards with ASME and Federal Spec callouts where applicable. They also incorporate professional quality features. Pry 

bars with handles are designed to maximize leverage and comfort, blades are designed to provide maximum leverage, and tapered 

tips for tough aligning jobs. In addition, superior design, materials, and heat treat optimize durability and strength. Available individually 

or in a selection of sets, these precision made tools can handle just about any prying or aligning application. 

PRY & ALIGNING BARS 

Manufactured from 

high alloy steel 

for strength and 

durability 

Curved blade provides 

extra leverage 

Handle conforms to the hand increasing 

operator comfort, provides a sure grip 

Tapered end for 

aligning applications 


Rolling head provides 

maximum leverage 

1127


■■Head Indexes Over 180 Degrees and Locks in 16 Positions 

■■Head Has Raised Striking Surface Allows for Striking to Loosen 

and Penetrate 

■■Angles Head with Nail Slot for Prying and Pulling Nails 

and Boards 

■■Durable Two-Tone Grip Provides Comfort, Control, and Safety 

■■Narrow Jab End for Extreme Prying and Leverage 

Indexing Flat Renovation Bar 

CODE RED 

SERIOUS RENOVATION 

Cat. No. UPC No. Packaging Length Extendable Length Product Weight Shelf Pack Qty. 

DB18X 037103257864 Boxed 18.0 in No 3.00 lb 1 

DB30X 037103257871 Boxed 30.0 in No 4.10 lb 1 

Adjustable Pry Bar 

■■Adjustable Jaws Slide and Clamp to Fit Onto Objects for 

Straightening and Prying 

■■Crow Bar End with Nail Puller Slot 

■■Striking Hammer head surface for Persuasion 

■■Large Claw on Head That Adjusts for Leverage in Pulling Nails 

CODE RED 



DB16 037103257888 Boxed 16 in 3.68 lb 1 

DB24 037103257895 Boxed 24 in 4.43 lb 1 


Flat Pry Bar 

■■Precision Ground Ends for Nail Pulling with Less Material 

Damage 

■■Nail Slot in End and Center for Access to Pulling Nails 

■■Durable High Visibility Red Finish is Corrosion-Resistant 

■■Radius End Design Adds Strength and Provides Better Prying 

Leverage 


FB13 037103257819 Carded 13 in 1.46 lb 6 

FB15 037103257826 Carded 15 in 1.59 lb 6 

FB7 037103257796 Carded 7 in 0.27 lb 6 

Molding Bars 

■■Striking Face Has Ground Surface for Precision Nailing 

■■Precision Ground Ends for Nail Pulling with Less 

Material Damage 

■■Nail Slot in Both Claw and Pry Ends for Access to Pulling 

■■Durable High Visibility Red Finish is Corrosion-Resistant 

CODE RED 


CODE RED 



MB10 037103257840 Carded 10 in 0.76 lb 6 

MB12 037103257857 Carded 12 in 0.80 lb 6 

MB8 037103257833 Carded 8 in 0.50 lb 6 

1128


Nail Puller Pliers 

■■Allows Users to Easily Extract Nails Regardless of Size or if the 

Head of Nail is Damaged or Removed 

■■Dual Handles Make it Quick and Easy to Grip, Roll, and Remove 

Nails or Staples 

■■Forged Steel Handles and Head Create a Durable Tool with 

Rubber Grips for Comfort and Control 

CODE RED 



NP11 037103263582 Carded 11 in 1.5 lb 6 

Nail Puller 

■■Box-Joint, Forged Alloy, Hardened and Tempered Jaw 

■■Available in Short or Long Jaw 

■■Black Enamel Finish 

■■Conforms to US Federal Spec. GGG-P-79Lb, Type 1, Class-1 

Cat. No. UPC No. Packaging Length Ext. Length Product Weight Shelf Pack Qty. 

56 037103462848 Carded 19 in 19 in 4.20 lb 1 

14 


1129


3 Pc. Pry Bar Set 

■■For Engine Repositioning and Placement, Aligning Steel 

Components and Fabrications and Repositioning Equipment 

■■Head Indexible Through 180° for Greater Leverage 

■■8 in. and 10 in. Pry Bars Provide Leverage in Tight Confines 

■■16 in. Pry Bar for Leverage in Medium-Duty Automotive and 

Industrial Applications 

■■14 Locking Head Positions for Unmatched Access 


82301D 099575823015 Boxed 4.33 lb 1 


82208 8 in. Indexing Pry Bar 82216 16 in. Indexing Pry Bar 

82210 10 in. Indexing Pry Bar 


■■For Engine Repositioning and Placement, Aligning Steel 

Components and Fabrications and Repositioning Equipment 

■■Head Indexible Through 180° for Greater Leverage 

■■8 in. Pry Bar Provides Leverage in Tight Confines 

■■16 in. Pry Bar for Leverage in Medium-Duty Automotive and 

Industrial Applications 




82300 099575823008 Boxed 2.43 lb 1 


82208 8 in. Indexing Pry Bar 82216 16 in. Indexing Pry Bar 

■■For Leverage in Medium-Duty Automotive and Industrial 

Applications 

■■For Demolition, Repositioning Equipment, Aligning Steel 

Components, Engine Repositioning, and Other Heavy-Duty 

Applications 


■■Grooved Profile Adds Traction on 24 in. and 33 in. Models 

Indexing Pry Bars 

Cat. No. UPC No. Packaging Length Extendable Length Product Weight Shelf Pack Qty. 

82208 099575822087 Boxed 8 in No 0.87 lb 1 

82210 099575822100 Boxed 10 in No 1.08 lb 1 

82216 099575822162 Boxed 16 in No 1.69 lb 1 

82224 099575822247 Boxed 24 in No 5.10 lb 1 

82233 099575822339 Boxed 33 in No 5.90 lb 1 

1130


■■For Demolition, Repositioning Equipment, Aligning Steel 

Components, Engine Repositioning, and Other Heavy-Duty 

Applications 

■■Extendable Handle Gives Greater Access and Leverage, and 

Collapses so it can be Stored Easily 


■■Grooved Head Profile Provides Additional Traction 

■■Head Indexible through 180° for Greater Leverage 

Extendable Indexing Pry Bars 

Cat. No. UPC No. Packaging Cont. Length Ext. Length Extendable Length Product Weight Shelf Pack Qty. 

82220 099575822209 Boxed 18.0 in 29.0 in Yes 5.28 lb 1 

82248 099575822483 Boxed 29.0 in 48.0 in Yes 10.21 lb 1 

■■Fits Nail Sizes 14D to 10D 

■■Indexible to 180 Degrees 

■■14 Locking Positions 

Nail Pulling Pry Bar 

Cat. No. UPC No. Packaging Length Ext. Length Product Weight Shelf Pack Qty. 

82212 099575822124 Boxed 12 in 12 in 4.82 lb 1 

18" Rolling Wedge Bar 

14 


82200 099575822001 Boxed 1.58 lb 1 


1131




■■Manufactured from High Alloy Steel for Strength and Durability 

■■Curved Blade Provides Extra Leverage 

■■Handle Conforms to the Hand Increasing Operator Comfort, 

Provides a Sure Grip 


70-579 781412705799 Boxed 5.65 lb 1 


70-531 12 in. Pry Bar 70-535 25 in. Pry Bar 

70-533 17 in. Pry Bar 70-537 31 in. Pry Bar 


■■Manufactured From High Alloy Steel for Strength and Durability 

■■Rolling Heads / Curved Blades Provides Leverage 

■■Tapered End for Aligning Applications 

4 Pc. Aligning/Rolling Head Set 


70-578 781412705782 Boxed 7.04 lb 1 



70-503 Aligning Pry Bar 5/8 in. x 16 in. 70-519 Rolling Head Bar 1/2" x 15" 

70-505 Aligning Pry Bar 3/4 in. x 24 in. 70-521 Rolling Head Bar 5/8" x 18" 

Pry Bars 


■■Manufactured From High Alloy Steel for Strength and Durability 


■■Handle Conforms to the Hand Increasing Operator Comfort, 

Provides a Sure Grip 

Cat. No. UPC No. Packaging Tip Width Stock Size Blade Length Length Product Weight Shelf Pack Qty. 

70-531 781412705317 Bulk 5/8 in 3/8 in 7 in 12 in 0.63 lb 1 




70-539 781412705393 Bulk 1 in 7/8 in 28 in 36 in 3.23 lb 1 

1132


Aligning Pry Bars 





Cat. No. UPC No. Packaging Tip Width Stock Size Length Product Weight Shelf Pack Qty. 

70-501 781412705010 Bulk 1/2 in 1/2 in 14 in 0.69 lb 1 

70-503 781412705034 Bulk 5/8 in 5/8 in 16 in 1.22 lb 1 

70-505 781412705058 Bulk 3/4 in 3/4 in 24 in 3.08 lb 1 

70-507 781412705072 Bulk 7/8 in 7/8 in 30 in 4.93 lb 1 

70-509 781412705096 Bulk 1-1/16 in 7/8 in 46 in 7.97 lb 1 

70-511 781412705119 Bulk 1-3/16 in 1-1/16 in 54 in 10.45 lb 1 

Rolling Head Pry Bars 



■■Rolling Head Provides Maximum Leverage 



70-517 781412705171 Bulk 3/8 in 3/8 in 9 in 0.31 lb 1 

70-519 781412705195 Bulk 1/2 in 1/2 in 15 in 0.31 lb 1 

70-521 781412705218 Bulk 5/8 in 5/8 in 18 in 1.59 lb 1 

Polished Rolling Head Pry Bars 



■■Rolling Head Provides Maximum Leverage 



70-515 781412705157 Bulk 9/16 in 5/8 in 18 in 1.25 lb 1 

14 


1133


3/8" (#3) and 1/2" (#4) Extendable Indexing Rebar Bender 

■■Dual Use Head Allows Bending for Both #3 and #4 Rebar 

■■Push Button Extends Bender to 35 inches for Maximum 

Leverage; Collapses to Just 21 inches for Convenient Storage 

and Portability 

■■14-Position Indexing Head Adjusts with Center Push Button to 

Allow Total Access for Maximum Leverage 

■■Extra-Sturdy Steel Handles for the Toughest Conditions 

■■Super-Strong Indexing Head Grips Rebar Securely for Accurate 

Bends 

Cat. No. UPC No. Packaging Length Capacity Product Weight Shelf Pack Qty. 

RB4 037103248770 Boxed 22-3/4 in, 35 in 3/8 in, 1/2 in 4.70 lb 1 

5/8" (#5) Indexing Rebar Bender 





Bends 



RB5 037103248787 Boxed 44-1/4 in 5/8 in 8.75 lb 1 

3/4" (#6) Indexing Rebar Bender 





Bends 


RB6 037103248794 Boxed 44-1/4 in 3/4 in 8.75 lb 1 

1134

C L A M P I N G & P U L L I N G 

Ratcheting Pullers............................. 1137 

Reversible Puller................................ 1139 

Combination Pullers.......................... 1139 

Slide Hammer Pullers........................ 1139 

Heavy Duty C-Clamps........................ 1141 

General Service C-Clamps................ 1142 

Square Throat C-Clamps................... 1142 

Deep Throat C-Clamps...................... 1144 

Hi-Viz Deep Throat C-Clamps........... 1145 

Lifting Eyes (Eye Bolts)..................... 1147 

Set-up Wedges.................................. 1150 

15 

C L A M P I N G / P U L L I N G 

1135


Clamping/Pulling 

GearWrench ® ratcheting pullers have a time-saving, indexing-jaw design. The legs index into position and stay in place, letting you 

easily support the puller and quickly connect each jaw one at a time to the pulley—without help. The pullers can also be converted 

to two- and three-leg pullers and the jaws reversed from external to internal style in seconds. Available in 2, 5, and 7-ton models. 

Maximum spread of 10 inches. Also available: 5-Ton Ratcheting Short / Long Leg Puller. 

Forged jaws 

for strength 

Anti-mushrooming 

head ensures 

good socket fit 

Quick change jaws for 2- 

to 3-jaw, internal/external 

operations 

Chrome-plated rotating 

replaceable tip prevents 

surface marks 

Geared jaws for 

easy positioning 

C L A M P I N G / P U L L I N G 15 

Clamping/Pulling 

Armstrong ® Clamping Tools offer a wide variety of professional C-Clamps and Lifting Eyes for just about any application. All are made 

to exacting standards with ASME and Federal Spec callouts where applicable. The extensive line of C-Clamps includes deep throat, 

super deep throat, general service, and heavy duty styles with standard black oxide and high visibility finishes, as well as zinc plated 

forcing screws for welding. All C-Clamp frames are drop forged from alloy steel and all anvils are produced to ensure a flat surface 

for proper alignment with the screw. These precision made C-Clamps can handle just about any clamping or holding application 

while cutting, drilling, welding, or fastening multiple pieces. 

LIFTING EYES 

Threads are roll formed for greater 

strength, smoother running, more 

clamping force with less effort 

and resistance to nicks 

Heavy-walled hub offers 

greater support to the 

forcing screw 

C-CLAMPS 

Forcing screw has a sliding 

handle for speed and leverage 

Patented design pad is coldformed, 

completely encircling 

the ball of the screw, providing 

permanent attachment, as well 

as a full swivel action 

Manufactured in accordance 

with the latest revision of ANSI/ 

ASME B18.15 

I-beam design for 

greater strength, 

yet lighter weight 

Extra large anvil 

provides a greater 

gripping area for 

securing work 

1136


■■Ratcheting Pullers Have a Time-Saving, Indexing-Jaw Design 

■■Legs Index Into Position and Stay in Place, Letting You Easily 

Support the Puller and Quickly Connect Each Jaw One at a Time 

to the Pulley—Without Help 

■■Pullers Can Also Be Converted to Two- and Three-Leg Pullers 

and the Jaws Reversed From External to Internal Style 

in Seconds 

2-Ton and 5-Ton Ratcheting Puller Set 


3627 082171036279 Boxed 5.13 lb 


3624D 2 Ton Ratcheting Puller 3625 5 Ton Ratcheting Puller 







in Seconds 

2-Ton Ratcheting Puller 

Reach/ Jaw 

Screw Jaw 


Cat. No. UPC No. Packaging Ton Length Capacity Screw Size Length Thickness Jaw Width Weight Qty. 

3624D 082171362408 Boxed 2 t 2-5/8 in 3-1/4 in 3/8 in - 24 4-1/2 in 3/8 in 5/8 in 2.55 lb 1 


362401 3 Pc. Legs Replacement Set 362403 Screw Replacement 

362402 Yoke Replacement 






and the Jaws Reversed From External to Internal Style in 

Seconds 


Reach/ Jaw 

Screw Jaw 



3625 082171362507 Boxed 5 t 4 in 5 in 9/16 in - 12 8-1/4 in 9/16 in 11/16 in 3.31 lb 1 

15 





1137








in Seconds 

■■For Short Leg Specifications see 3625, Table below Shows 

Long Leg Specifications 

5-Ton Ratcheting Short / Long Leg Puller 

Reach/ Jaw 

Jaw 


Cat. No. UPC No. Packaging Ton Length Capacity Screw Size Screw Length Thickness Jaw Width Weight Qty. 

3628D 082171036286 Boxed 5 t 6-3/4 in 7-1/2 in 9/16 in - 12 8-1/4 in 9/16 in 11/16 in 6.22 lb 1 


362502 Yoke Replacement 362801 3 Pc. Long Legs Replacement Set 

362503 Screw Replacement 






and the Jaws Reversed From External to Internal Style in 

Seconds 

■■Maximum Spread of 10 Inches 



Reach/ Jaw 

Screw Jaw 



3626 082171036262 Boxed 7 t 6-3/4 in 10 in 3/4 in - 12 12 in 9/16 in 11/16 in 6.80 lb 1 




1138


■■Reversible Jaws for Internal and External Applications 

Combination 2 Jaw Reversible (Internal/External) 

Cat. No. UPC No. Packaging Ton 

Reach/ 

Length 

Jaw 

Capacity 

Screw Size 

Screw 

Length 

Upper Jaw 

Thickness 

Lower 

Jaw 

Thickness 

3551D 082171035517 Carded 2 t 3-1/2 in 5 in 3/8 in - 24 4-7/8 in 3/16 in 1/8 in 5/16 in 1/2 in 1.02 lb 1 

3552 082171035524 Carded 5 t 5-3/4 in 8 in 9/16 in - 20 7 in 1/4 in 5/16 in 3/8 in 3/4 in 2.52 lb 1 

3553D 082171035531 Carded 7 t 5 in 9 in 11/16 in - 18 7-1/2 in 3/8 in 3/8 in 1 in 1 in 4.52 lb 1 

Upper 

Jaw 

Width 

Lower 

Jaw 

Width 

Product 

Weight 

Shelf 

Pack 

Qty. 

■■Reversible Jaws for Internal and External Applications 

■■Includes Blow Mold Case for Storage 

Combination 2 & 3 Jaw Reversible (Internal/ 

External) Pullers 

Cat. No. UPC No. Packaging Ton 

Reach/ 

Length 

Jaw 

Capacity 

Screw Size 

Screw 

Length 

Upper Jaw 

Thickness 

Lower Jaw 

Thickness 

3561 082171035616 Carded 2 t 3-1/2 in 5.0 in 3/8 in - 24 4-7/8 in 3/16 in 1/8 in 5/16 in 1/2 in 1.30 lb 1 

3562D 082171035623 Carded 5 t 5-3/4 in 8.0 in 9/16 in - 20 7 in 3/8 in 3/4 in 3/8 in 3/4 in 2.50 lb 1 

3563 082171035630 Carded 7 t 5 in 9.0 in 11/16 in - 18 7-1/2 in 3/8 in 3/8 in 1 in 1 in 6.05 lb 1 

■■Provides a Wide Range of Puller Applications Such as: Flange 

Type Axles, Oil Seals & Other Press Fit Parts 

■■Jaws Can Be Set Up for 2 or 3 Jaw Internal or External Pulling 

Jobs 


10 Way Slide Hammer Puller Set 


41700D 082171041709 Boxed 17.0 lb 1 

Upper 

Jaw 

Width 

Lower 

Jaw 

Width 

Product 

Weight 

Shelf 

Pack 

Qty. 

15 



3591D 5-1/2 lb. Slide Hammer Only 41706 Center Bolt & Cone 230071D Shallow Flange 

41704 2 Way Yoke 41707 3 Pc. Adapter Set 230075D Deep Flange 

41705 3 Way Yoke 41708 Leg Package & Screws 

1139


■■Three Pullers Designed to Make the Removal of Semi-Floating 

Rear Axle Bearings Easier 

■■1" X 1-7/8" Puller 

■■1-5/16 " X 2-3/8" Puller 

■■1-3/8" X 2-7/8" Puller 

Rear Axle Bearing Puller Set 


41710 082171417108 Boxed Rear Axle Bearing Puller Set 3.3 lb 1 

■■5 lb Hammer with a 5/8" - 18 Threaded End 

■■May Be Used With an Internal Pulling Attachment With Female or 

Male Female Threaded Adapters 

24" Basic Slide Hammer Unit 


3591D 082171035913 Carded 7.05 lb 1 


■■Attachments are Used for the Removal of Bearings, Thin-Faced 

and Cone-Shaped Gears 

■■Beveled Edge Allows Insertion Behind Pulleys, Gears or Bearings 

Where Space Limits the Use of a Standard Puller Jaw 

■■Grip the Part to be Pulled, then Pull with a Gear Puller 

Split Bearing Attachments 

Cat. No. UPC No. Packaging Spread (Min, Max) Width Screw Size Product Weight Shelf Pack Qty. 

83600 099575836008 Carded 1/8 in, 2 in 2-7/16 in 3/8 in - 16 1.30 lb 1 

83601 099575836015 Carded 1/2 in, 4-5/8 in 4-3/8 in 5/8 in - 18 5.90 lb 1 

83602 099575836022 Carded 1/2 in, 9 in 6 in 5/8 in - 18 12.70 lb 1 

1140

C - C L A M P S 

C-Clamp Heavy Duty Pattern 


■■Strongest C-Clamp Produced 

■■Forcing Screw has a Square Head, Does Not Include a Handle 

■■Square Head is Deigned to be Turned with a Wrench or a 4 / 8 

Point Socket Due to High Load Capacity 

■■Extra Long, Heavy Walled Hub Prevents Springing Under Full 

Recommended Load 

■■Forcing Screw Has a Hardened Tip, Standard V Threads 

■■Meets or Exceeds US Federal Spec. GGG-C-406D 


Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread Size 

Length of 

Screw 

Min. Proof 

78-000 781412780000 Bulk 13/16 in 0 in Yes 5/8 in 3/8 in - 16 2-1/4 in 2800 lb 0.33 lb 1 

78-010 781412780109 Bulk 1-5/16 in 0 in Yes 15/16 in 7/16 in - 14 2-13/16 in 5600 lb 0.72 lb 1 

78-015 781412780154 Bulk 1-3/4 in 0 in Yes 1-7/16 in 5/8 in - 11 4-3/16 in 8750 lb 2.33 lb 1 

78-020 781412780208 Bulk 2-3/8 in 1/2 in No 1-9/16 in 3/4 in - 10 4-1/4 in 12500 lb 3.56 lb 1 

78-021* 781412780215 Bulk 2-3/8 in 0 in Yes 1-9/16 in 3/4 in - 10 5 in 12500 lb 2.99 lb 1 

78-030 781412780307 Bulk 3-5/16 in 5/8 in No 2 in 7/8 in - 9 5-3/4 in 16250 lb 5.85 lb 1 

78-031* 781412780314 Bulk 3-5/16 in 0 in Yes 2 in 7/8 in - 9 6-11/16 in 16250 lb 5.53 lb 1 

78-040 781412780406 Bulk 4-5/8 in 1 in No 2-7/16 in 1 in - 8 7-1/16 in 20000 lb 9.66 lb 1 

78-041* 781412780413 Bulk 4-5/8 in 0 in Yes 2-7/16 in 1 in - 8 8-11/16 in 20000 lb 8.00 lb 1 

78-050 781412780505 Bulk 5-3/8 in 1-1/4 in No 2-7/8 in 1 in - 8 7-3/4 in 23800 lb 14.56 lb 1 

78-051* 781412780512 Bulk 5-3/8 in 0 in Yes 2-7/8 in 1 in - 8 9-13/16 in 23800 lb 15.79 lb 1 

78-060 781412780604 Bulk 6-5/8 in 2-1/2 in No 3-1/4 in 1-1/8 in - 7 8-3/16 in 27500 lb 14.03 lb 1 

78-061* 781412780611 Bulk 6-5/8 in 0 in Yes 3-1/4 in 1-1/8 in - 7 11-3/8 in 27500 lb 23.01 lb 1 

78-080 781412780802 Bulk 8-1/4 in 2-1/4 in No 3 in 1-1/4 in - 7 10-5/16 in 31250 lb 26.12 lb 1 

78-081* 781412780819 Bulk 8-1/4 in 0 in Yes 3 in 1-1/4 in - 7 13-9/16 in 31250 lb 27.66 lb 1 





* Frame of clamp is marked with equivalent non-full length forcing screw part number 

Product 

Weight 

Shelf Pack 

Qty. 

15 


1141



■■Designed for Use Where the Depth of a Deep Throat or the 

Extreme Strength of a Heavy Duty Pattern are Not Required 

■■Forcing Screw has a Square Head and a Sliding Handle, 

Standard V Threads 

■■Swivel Pad Completely Encircles the Ball Joint Providing 

Permanent Attachment as well as Full Swivel Action 

■■Heavy Walled Hub Supports Forcing Screw Reducing Distortion 

■■Extra Large Anvil for Greater Gripping Area 

■■Anvil is Produced to Insure a Flat Surface for Proper Alignment 

With Screw 


C-Clamp General Service Pattern 



Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 

Screw 

Min. Proof 

78-102 781412781021 Bulk 2 in 0 in Yes 1-3/8 in 1/2 in - 13 4-7/8 in 7500 lb 1.45 lb 1 


78-104 781412781045 Bulk 4 in 0 in Yes 2 in 3/4 in - 10 7-7/8 in 10000 lb 4.12 lb 1 

78-106D 781412781069 Bulk 6 in 2 in No 2-1/4 in 3/4 in - 10 7-7/8 in 11250 lb 6.34 lb 1 

78-107* 781412781076 Bulk 6 in 0 in Yes 2-1/4 in 3/4 in - 10 9-5/8 in 11250 lb 5.62 lb 1 

78-108 781412781083 Bulk 8 in 4 in No 2-1/4 in 3/4 in - 10 7-7/8 in 12500 lb 7.34 lb 1 

78-109* 781412781090 Bulk 8 in 0 in Yes 2-1/4 in 3/4 in - 10 

11-11/16 

in 

Product 

Weight 

Shelf Pack 

Qty. 

12500 lb 7.44 lb 1 









* Frame of clamp is marked with equivalent non-full length forcing screw part number 

1142



■■Designed for use Where a Super Deep Throat is Required 

■■Super Deep Square Throat Offers up to 89% More Capacity 

than other Patterns 

■■Forcing Screw has a Sliding Handle 




■■Forcing Screw has Roll Formed Acme Threads For Greater 

Strength, Smoother Running, Reduced Thread Damage, 

Producing More Clamping Force With Less Effort 

■■Extra Large Anvil for Greater Gripping Area 

■■Anvil is Produced to Insure a Flat Surface for Proper Alignment 

with Screw 


C-Clamp Square Throat Pattern, Black Finish 


Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 

Screw Min. Proof 

Product 

Weight 

Shelf Pack 

Qty. 






■■Zinc Plated Forcing Screw for use in Welding - Resists Adhesion 

of Welding Spatter 

■■Designed for use Where a Super Deep Throat is Required 

■■Super Deep Square Throat Offers up to 89% More Capacity 

than other Patterns 








■■Extra Large Anvil for Greater Gripping Area, Produced to Insure 

a Flat Surface for Proper Alignment with Screw 


C-Clamp Square Throat Pattern, Zinc Plated 


Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 


Product 

Weight 

Shelf Pack 

Qty. 





* Frame of clamp is marked with standard square throat part number 

15 


1143


C-Clamp Deep Throat Pattern 


■■Most Popular and Versatile Style C-Clamp 












Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 


Product 

Weight 

Shelf Pack 

Qty. 

78-401 781412784015 Bulk 1-1/2 in 0 in Yes 1-5/8 in 3/8 in - 16 3-1/4 in 1400 lb 0.45 lb 1 





78-408 781412784084 Bulk 8 in 0 in Yes 5 in 3/4 in - 6 12-3/8 in 5900 lb 7.56 lb 1 







■■Zinc Plated Forcing Screw for use in Welding - Resists Adhesion 

of Welding Spatter 












C-Clamp Deep Throat Pattern, Zinc Plated 


Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 


Product 

Weight 

Shelf Pack 

Qty. 

78-431* 781412784312 Bulk 1-1/2 in 0 in Yes 1-3/8 in 3/8 in - 16 3-1/4 in 1400 lb 0.44 lb 1 

78-432* 781412784329 Bulk 2 in 0 in Yes 2 in 1/2 in - 8 4-3/4 in 3300 lb 1.36 lb 1 





78-440* 781412784404 Bulk 10 in 3 in No 5-3/8 in 3/4 in - 6 12-3/8 in 6200 lb 10.34 lb 1 




* Frame of clamp is marked with standard deep throat part number 

1144



■■Finished in a Safety Yellow Baked-on High-Gloss Enamel Finish 

for High Visibility 

■■Product is Marked with Deep Throat Pattern Part Number 












C-Clamp Deep Throat Pattern, High Visibility Finish, 

Safety Yellow 


Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 


Product 

Weight 

Shelf Pack 

Qty. 










15 


1145



■■Finished in a Safety Orange Baked-on High-Gloss Enamel Finish 

for High Visibility 

■■Product is Marked with Deep Throat Pattern Part Number 












C-Clamp Deep Throat Pattern, High Visibility Finish, 

Safety Orange 


Capacity 

Max. 

Capacity 

Min. 

Full Length 

Screw 

Throat 

Depth 

Thread 

Size 

Length of 


Product 

Weight 

Shelf Pack 

Qty. 











1146

L I F T I N G E Y E S 

Shoulder Pattern Lifting Eyes 


■■Maximum Working Loads Were Determined and Actual Lifts 

Should be Accomplished By Using a Very Slow, Steady Pull 

■■Lifting Eyes Are Available In 2 Styles; Shoulder Pattern and Plain 

Pattern With Both Patterns Suitable for Vertical Lifts 

■■Angular Lifts Place Additional Stress On a Lifting Eye and Should 

be Avoided 

■■Shoulder Pattern Lifting Eyes Are Recommended for Use 

Whenever Possible Since There is No Guarantee That a Load 

Will Not be Subjected to An Angular Lift and Forces 

■■Plain Pattern Lifting Eyes Should be Firmly Seated With At Least 

90% Of the Thread Engaged With the Treads Close to the Eye 

Fully Engaged 

■■Lifting Eyes Should Never be Ground, Machined, Metal 

Stamped, or Altered in Any Way 

■■Lifting Eyes Capabilities Can be Affected by Temperature 

■■Lifting Eyes Should be Routinely Inspected 


Eye 

Diameter; 

Inside 

Eye 

Diameter; 

Outside 

Thread Length 

Max. Load Max. Load Max. Load Product 

Cat. No. UPC No. Packaging Size Under Eye 

0° 30° 45° Weight 

89-021 781412890211 Bagged 1/4 in -20 1 in 3/4 in 1-3/16 in 500 lb 75 lb N/A 0.05 lb 1 

89-022 781412890228 Bagged 

5/16 in 

-18 

1-1/8 in 7/8 in 1-7/16 in 800 lb 225 lb N/A 0.08 lb 1 

89-023 781412890235 Bagged 3/8 in -16 1-1/4 in 1 in 1-21/32 in 1400 lb 650 lb 350 lb 0.13 lb 1 

89-024 781412890242 Bagged 

7/16 in 

-14 

1-3/8 in 1-3/32 in 1-27/32 in 2000 lb 1000 lb 500 lb 0.25 lb 1 

89-025 781412890259 Bagged 1/2 in -13 1-1/2 in 1-3/16 in 2-1/16 in 2600 lb 1200 lb 650 lb 0.35 lb 1 

89-026 781412890266 Bagged 

9/16 in 

-12 



89-028 781412890280 Bagged 3/4 in -10 2 in 1-1/2 in 2-13/16 in 6000 lb 3200 lb 2200 lb 1.36 lb 1 


89-030 781412890303 Bagged 1 in -8 2-1/2 in 1-13/16 in 3-9/16 in 9500 lb 5000 lb 3600 lb 2.92 lb 1 

89-031 781412890310 Bagged 1-1/8 in -7 2-3/4 in 2 in 4 in 11800 lb 5500 lb 4500 lb 3.40 lb 1 

89-032 781412890327 Bagged 1-1/4 in -7 3 in 2-3/16 in 4-7/16 in 15000 lb 7000 lb 5200 lb 4.67 lb 1 

89-034 781412890341 Bagged 1-1/2 in -6 3-1/2 in 2-1/2 in 5-3/16 in 21700 lb 10500 lb 7200 lb 7.28 lb 1 

89-035 781412890358 

89-036 781412890365 

Bulk with 

UPC 

Bulk with 

UPC 

1-3/4 

in -5 

2 in - 

4-1/2 

Shelf Pack 

Qty. 


4 in 3-1/4 in 6-7/8 in 38500 lb 18000 lb 13500 lb 14.55 lb 1 

15 


1147


Plain Pattern Lifting Eyes 


■■Maximum Working Loads Were Determined and Actual Lifts 

Should be Accomplished By Using a Very Slow, Steady Pull 

■■Lifting Eyes Are Available In 2 Styles; Shoulder Pattern and Plain 

Pattern With Both Patterns Suitable for Vertical Lifts 

■■Angular Lifts Place Additional Stress On a Lifting Eye and Should 

be Avoided 

■■Shoulder Pattern Lifting Eyes Are Recommended for Use 

Whenever Possible Since There is No Guarantee That a Load 

Will Not be Subjected to An Angular Lift and Forces 

■■Plain Pattern Lifting Eyes Should be Firmly Seated With At Least 

90% Of the Thread Engaged With the Treads Close to the Eye 

Fully Engaged 

■■Lifting Eyes Should Never be Ground, Machined, Metal 

Stamped, or Altered in Any Way 

■■Lifting Eyes Capabilities Can be Affected by Temperature 

■■Lifting Eyes Should be Routinely Inspected 



Thread Length 

Max. Load Max. Load Max. Load Product 

Cat. No. UPC No. Packaging Size Under Eye 

0° 30° 45° Weight 

89-001 781412890013 Bagged 1/4 in -20 1 in 3/4 in 1-3/16 in 500 lb N/A N/A 0.10 lb 1 

LIFTING EYE SAFETY 

Eye 

Diameter; 

Inside 

Eye 

Diameter; 

Outside 

89-002 781412890020 Bagged 

5/16 in 

-18 

1-1/8 in 7/8 in 1-7/16 in 800 lb N/A N/A 0.17 lb 1 

89-003 781412890037 Bagged 3/8 in -16 1-1/4 in 1 in 1-21/32 in 1400 lb N/A N/A 0.19 lb 1 

89-004 781412890044 Bagged 

7/16 in 

-14 

1-3/8 in 1-3/32 in 1-27/32 in 2000 lb N/A N/A 0.23 lb 1 

89-005 781412890051 Bagged 1/2 in -13 1-1/2 in 1-3/16 in 2-1/16 in 2600 lb N/A N/A 0.30 lb 1 

89-006 781412890068 Bagged 

9/16 in 

-12 

1-5/8 in 1-9/32 in 2-9/32 in 3000 lb N/A N/A 0.44 lb 1 


89-008 781412890082 Bagged 3/4 in -10 2 in 1-1/2 in 2-13/16 in 6000 lb N/A N/A 0.82 lb 1 


89-010 781412890105 Bagged 1 in -8 2-1/2 in 1-13/16 in 3-9/16 in 9500 lb N/A N/A 2.06 lb 1 

89-011 781412890112 Bagged 1-1/8 in -7 2-3/4 in 2 in 4 in 11800 lb N/A N/A 2.96 lb 1 

89-012 781412890129 Bagged 1-1/4 in -7 3 in 2-3/16 in 4-7/16 in 15000 lb N/A N/A 3.87 lb 1 

89-014 781412890143 Bagged 1-1/2 in -6 3-1/2 in 2-1/2 in 5-3/16 in 21700 lb N/A N/A 6.73 lb 1 

Shelf Pack 

Qty. 

The dangers inherent in any lifting operation are obvious. Yet every year, accidents occur which could have been avoided by applying the simplest, most fundamental 

safety precautions. 

1. Read and follow all of the suggestions stated in the “Manual of Proper Uses of Forged Lifting Eyes (Eye Bolts),” BEFORE attempting to use Lifting Eyes in any 

application. A copy is on the following page of this catalog. 

2. ALWAYS stay well clear of the load. 

3. DO NOT use Lifting Eyes for angular lifts unless ABSOLUTELY necessary. If angular lifts CANNOT be avoided, then ONLY Shoulder Pattern Lifting Eyes-which are 

specifically designed for this application-should be used. 

4. Armstrong Carbon Steel Lifting Eyes must NEVER be welded. 

5. DO NOT use Carbon Steel Lifting Eyes at temperatures below 32°F (0°C). 

6. NEVER exceed the MAXIMUM Working Load of a Lifting Eye. 

1148


Proper Uses of Forged Lifting Eyes (Eye Bolts) 

HOW RECOMMENDED STATIC WORKING LOADS ARE DETERMINED 

Lifting Eye manufacturers provided recommended static working loads for their standard lifting eyes. These static working loads are shown in the manufacturers’ catalogs 

and have been determined by multiplying the tensile strength of the lifting eye material, after heat treating, by the tensile stress area of the threaded lifting eye shank. The 

product of this multiplication is the maximum ultimate strength of the lifting eye. Dividing this figure by a factor of five provides the recommended static working load for a 

straight vertical lift. More complete information may be found in ASTM A 489, Standard Spec. for Carbon Steel Lifting Eyes. 

ANGULAR LIFTS 

An angular lift (see figure 1) places additional stresses on a lifting eye, above that 

of the load to be hoisted. For this reason, use of angular lifts should be avoided 

whenever possible. If, however, the situation necessitates an angular lift, a properly 

selected and inserted lifting eye must be used, and a reduction in the rated capacity 

must be applied. 

Angular lifts of 30° (figure 1) apply additional stresses and necessitate reduced 

working loads. 

SHOULDER PATTERN LIFTING EYES (EYE BOLTS) 

ARE PREFERABLE 

In theory, plain pattern and shoulder pattern lifting eyes are equally suitable for 

vertical lifts. But since there is no guarantee that a load will never be subjected 

to an angular lift, shoulder pattern lifting eyes are recommended for use 

wherever possible. 

When a shoulder pattern lifting eye is properly seated in the receiving hole, 

the shoulder bears against the seat and reduces bending stress on the shank. 

SEATING OF LIFTING EYES (EYE BOLTS) 

Shoulder pattern lifting eyes should always be screwed in so as to firmly seat the 

shoulder, with at least 90% of the thread engaged. To facilitate this, the receiving 

hole should be machine countersunk. (See figure 2.) If countersinking is impossible, 

a minimum number of washers should be used to build up the surface of the load 

until the shoulder can be firmly seated by hand. Be sure at least 90% of the threads 

are engaged in the receiving hole with a minimum thread engagement of at least 

1-1/2 times the thread diameter in steel when this method is used. 

When using a plain pattern lifting eye, be sure the bolt is firmly seated by hand with 

at least 90% of the thread engaged in the receiving hole with the full threads close 

to the eye fully engaged. 

Loads should always be applied to lifting eyes in the plane of the eye, not at some 

angle to this plane. Therefore, the direction of the load should be taken into account 

when seating the lifting eye. Before lifting the load, but with the load lines under tension, 

check to see if the lifting eyes are properly positioned. 

RECEIVING HOLE 

In order to obtain the maximum strength from an eye bolt, considerable care must 

be given to the receiving hole into which the bold will be screwed. (See Figure 2) Tap 

the correct class fit thread to accommodate the full length of the lifting eye shank. 

This is important because recommended capacities apply only when a minimum 

90% of the threaded shank is engaged. For shoulder pattern lifting eyes, counterbore 

the hole to insure proper seating of the shoulder, as described previously. 

DIA x 1/8 x 45° 

BOLT DIA + 10% APPROX. 

DIA x 1/4 MIN 

MIN. DEPTH 

FULL THD 

CHIP CLEAR 

TAP DRILL 

15 


1149


CHECK SEATING AFTER APPLYING ANGULAR LIFT 

Immediately after applying an angular load to a shoulder pattern lifting eye, check to 

be sure the shoulder is still firmly engaged. This is important, since the initial lift may 

cause the bolt to back off, away from the load. In such cases, the lifting eye should 

be unloaded and the lifting eye properly reseated. 

THREAD ENGAGEMENT 

The minimum thread engagement should be at least 1-1/2 times the thread diameter 

in steel. Refer to ASME/ASME B18.15, Forged Lifting Eyes (Eye Bolts), for engagements 

in other materials. 

UNDERCUT LIFTING EYES (EYE BOLTS) 

Undercutting of lifting eyes to provide clearance in a noncounterbore/countersunk 

hole is not recommended. 

LOW TEMPERATURE SERVICE 

Low temperature service poses additional problems. It is mandatory that all safety 

precautions be rigidly adhered to. 

At temperatures below 300F(-10C), carbon steel, normally used for standard lifting 

eyes, is subject to a decrease in shock resistance and ductility at the lower temperatures. 

(a) To minus 400F (-400C): Heat treated low carbon alloy steel ASTM specification 

F541, Alloy Steel Lifting Eyes, should be used as a guide. 

(b) Under minus 400F (-400C) Use austenitic type steel. A reduction in rated load 

may occur. 

DAMAGED THREADS 

Lifting eyes with worn, chipped, or otherwise damaged threads should be immediately 

destroyed. Such damage weakens the lifting eye and can cause improper seating. 


DYNAMIC LOADING 

Shock or rapid loading is inherently dangerous. All loads should be applied in a 

gradually increasing manner. 

ALWAYS STAND CLEAR 

Never stand, work or crawl under the load. If the load could swing, or if the pieces 

could fly in the event of a drop, allow for this possibility by establishing a safe distance 

between yourself and the load. 

DON'T OVERLOAD 

Follow carefully the working load recommendations of the manufacturer of the lifting 

eye you are using. 

ALTERING OF LIFTING EYES (EYE BOLTS) 

Lifting eyes should never be ground, machined, metal stamped or altered in any way, 

since such operation is likely to weaken the bolt. Lifting eyes showing signs of having 

been so treated should immediately be destroyed. 

EXTREME HEAT 

Lifting eyes should never be welded, used at, or subjected to temperatures above 

275°F (135°C). Important physical properties are likely to be changed by such heating, 

creating an unsafe bolt. Lifting eyes showing signs of such heating should be 

immediately destroyed. 


Set-Up Wedges 

INSPECTION 

Lifting eyes should be routinely inspected for such conditions as: 

A. Elongated or bent eye section. 

B. Elongated or bent shank. 

C. Nicks and gouges. 

D. Obvious wear. 

E. Worn, corroded and/or distorted threads. 

F. Cracks found by non-destructive testing. 

G. Absence of sufficient identifying markings. 

If any of these conditions exist, the lifting eye should be removed from service and 

destroyed. 

In addition, the receiving hole should be carefully cleaned and inspected for worn 

threads or other thread deterioration prior to each insertion of the lifting eye. 

Any lifting eye should be removed from service and destroyed when the manufacturer’s 

identifying marks are no longer readily identifiable to guarantee proper reference 

for continued safe usage. 

HOW TO DESTROY 

Lifting eyes that are being replaced should be rendered unusable. Crushing or cutting 

across the eye is recommended. 

Cat. No. UPC No. Packaging Length Width Height Product Weight Shelf Pack Qty. 

79-493 781412794939 Bagged 3.000 in 1.000 in 0.250 in 0.11 lb 1 



1150

A U T O M O T I V E S P E C I A L T Y 

Service Kits........................................ 1153 

Engine Tools...................................... 1162 

Fuel Tools........................................... 1167 

Piston Service.................................... 1179 

Valve Tools......................................... 1183 

Exhaust.............................................. 1185 

Battery................................................ 1188 

Electrical............................................ 1190 

Ignition............................................... 1191 

Spark Plug......................................... 1193 

Body Tools......................................... 1196 

Brake Service.................................... 1205 

Brake Bleeding.................................. 1208 

Brake Tubing..................................... 1212 

Brake Hones...................................... 1215 

16 

Brake Measure.................................. 1216 

Wheel Tools....................................... 1219 

Oil Filter Wrenches............................ 1224 

Steering.............................................. 1231 

Suspension........................................ 1235 

Drive Train......................................... 1236 

Snap Rings......................................... 1238 

General Purpose................................ 1238 

A U T O S P E C I A L T Y 

1151

A U T O M O T I V E S P E C I A L T Y 

Since our beginning, Gearwrench ® automotive specialty tools have been driven by innovation. From our first specialty tool, the 

Model-T valve spring lifter, to our latest Ratcheting Puller, we’ve built our reputation with tools that make tough jobs easy. 

Most of our products have been upgraded with new improved features like dual material handles designed for a more comfortable 

grip or dual dipped handles on pliers providing more cushion for your hands. 

Gearwrench ® automotive specialty tools are proudly made with the finest components under the most stringent manufacturing 

guidelines. Made for everyday use – guaranteed for life. 

Better tools mean easier, more efficient work so we constantly evaluate automotive engineering trends allowing us to consistently 

improve and enhance our tools to better fit professional hands. That’s why they are the first choice for thousands of automotive 

technicians worldwide. 

AUTOMOTIVE 

SERVICE KITS 

Auto Specialty 

Service kits, such as this disc/drum brake 

kit, contain all the tools required for a specific 

applications. Most are available in a convenient 

and sturdy case. 

TESTING 

EQUIPMENT 

A U T O S P E C I A L T Y 16 

SPECIALIZED 

APPLICATION 

TOOLS 

GearWrench offers an ever 

growing variety of automotive 

specialized application tools 

designed to last and make the 

professionals job easier 

GearWrench offers a wide range 

of automotive testing equipment 

such as this universal compression 

tester kit 

Easy to use 

locking feature 

Dual dipped grip for 

comfort and force 

1152

S E R V I C E K I T S 

■■Disconnect Tools that Separate Fittings on Fuel, Filter, 

Transmission, Air Conditioning Systems and Fuel Tank Return 

Lines on Most Vehicles, Trucks and Other Heavy Equipment 

12 Pc. Fuel & Trans Line Disconnect Set 


41500 082171415005 Boxed 12 Pc. Fuel & Trans Line Disconnect Set 3.53 lb 1 


3321 Fuel Line Quick Disconnect Tool 3894 Ford Auto Transmission to Radiator Line Disconnect Tool 

3408D Ford Fuel Line Coupling Tool 3895D Disconnect for Fuel Lines Sizes 1/4" - Black 

3413D Ford Clutch Coupling Tool 3896D Disconnect for Fuel Lines Sizes 5/16" - Red 

3890D Chrysler Quick Disconnect Tool 3897D Disconnect for Fuel Lines Sizes 3/8" - Gold 

3891D GM Transmission Oil Cooler Line Disconnect Tool 3898D Disconnect for Oil Cooler Line - Blue 

3892D GM Hydraulic Clutch Line Disconnect Tool - Replacement Bands 

3893D Transmission Oil Cooler Line Disconnect Tool 

■■Kit Works on both Disc and Drum Brake Systems 

■■Use to Adjust Clearance Between Drum Brakes And Shoe, 

Remove and Install Shoe Return Springs and Brake Pads 

■■Heavy Duty Brake Spreader - Use with Both a 5/16" Socket 

Wrench or Use By Hand 

■■Brake Lining Thickness Gauge - Color Coded Brake Gauge 

Identifies Thickness Levels for Brake Lining Inspection 

16 Pc. Brake Service Set 

16 


41520 082171041525 Boxed 16 Pc. Brake Service Set 5.98 lb 1 


287D Drum Brake Adjusting Tool 80421 3/8" Drive Hex Bit Socket, 3/8" 

298D Brake Spring Pliers 80428D 3/8" Drive Hex Bit Socket, 7mm 

2774D Universal Brake Shoe Retaining Spring Tool 80429 3/8" Drive Hex Bit Socket, 8mm 

3163D Disc Brake Piston Tool 80431 3/8" Drive Hex Bit Socket, 10mm 

3355D GM-Ford Disc Brake Piston Tool 80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 

3525D Heavy Duty Brake Pad Separator 80452 3/8" Drive TORX® Press-Fit Bit Socket, T-45 

3962 Brake Lining Thickness 80454 3/8" Drive TORX® Press-Fit Bit Socket, T-50 



1153


■■Designed for Vehicles With Brake Pistons That are Mechanically Tied 

to the Parking Brake and Require a Turning Action to Push Back 

■■Set Covers Most Domestic and Import Vehicles 

11 Pc. Rear Brake Caliper Set 


41540 082171041549 Boxed 11 Pc. Rear Brake Caliper Set 5.14 lb 1 


41541 Applicator & Pad for Brake Tool 41545 Adapter 4: 1-1/4", 2 Pin 41548D Adapter 7: 1-5/8", 2 Pin(S) 

41542 Adapter O: 2-1/2", 1 Pin 41546D Adapter 5: 1-3/8", 2 Pin, 3/8" Drive 41549D Adapter 8: 1-7/8", 1 Pin 

41543 Adapter 2: 2", 3 Pin 41547 Adapter 6: 1-5/8", 2 Pin(L) 41550D Adapter P: 2-1/4", 1 Pin 

41544 Adapter 3: 2-1/4", 3 Step 

■■Removes and Installs Power Steering Pump Pulleys Off Most 

Domestic Vehicles 

Power Steering Pump Puller Set 


41560D 082171041563 Boxed 4.23 lb 1 


Cat. No. 

3893D 

41561D 

41562D 

Description 

Transmission Oil Cooler Line Disconnect Tool 

Bushing and Screw Set A 

Bushing and Screw Set B 

Fan Clutch Service Set 

■■Covers Most Vehicles With Bolt on Pulleys and Also Newer Chrysler Engines 

With Press on Pulleys Requiring Special Pins to Hold Housing 

■■Features the Patented Universal Pulley Holder 


41580D 082171414572 Boxed Fan Clutch Service Set 14.12 lb 1 


3422 40mm Fan Nut Wrench 3902D Pulley Holder Pin Set large ( 10mm, 18mm) 

3473 Fan Clutch Wrench - Diesel - 22mm Fan Nut Wrench 

3900 Universal Pulley Holder - 36mm Fan Nut Wrench 

3901D Pulley Holder Pin Set Small (8mm) - 50mm Fan Nut Wrench 

1154


■■Works on Harmonic Balancers, Steering Wheels, Crankshaft 

Pulleys, and Gears 

■■Capable of Handling Almost Every Two or Three-Way Bolt Pull 

Possible on Most Cars, Pickups, SUV's, and Small Engines 

Master Bolt Grip Set 


41600 082171041600 Boxed 7.16 lb 1 


41601 3 Way Yoke for Bolt Grip Set 41604D Bolt Sets (Zinc SAE) 

41602 4 Pc. Puller Tip Set 41605 Center Screws for Puller 

41603 Bolt Sets (Black Metric) 

■■Works With Hand and Pneumatic Air Systems to Remove Tie 

Rods, Ball Joint and Pitman Arm Assemblies 

■■Includes Popular Sizes: 1-1/8", 15/16", and 11/16" 

■■Chrome Plated, Protects Against Corrosion and Provides 

Improved Visibility 

■■Knurled Handle for Better Grip 

Pneumatic Tie Rod/Ball Joint Separator Kit - 3 Sizes 


41610 082171041617 Boxed 

Pneumatic Tie Rod / 

Ball Joint Separator 

Kit - 3 sizes 

Product 

Weight 

Shelf 

Pack 

Qty. 

4.70 lb 1 

16 

■■Allows for Easy Removal of the Most Popular Types of Pitman 

Arms, Tie Rods, and Ball Joints 

Front End Service Set 


41690 082171416903 Boxed Front End Service Set 12.65 lb 1 


2289D Pitman Arm Puller 3917D Tie Rod End Puller and Pitman Arm Puller - Universal Tie Rod End Remover 

3916D Universal Ball Joint Separator - Tie Rod Puller 


1155


Steering Service Set 

■■Can Remove a Steering Wheel From Most Domestic and Import 

Cars With or Without Telescoping Tilt Columns 

■■Use the Puller Legs With the Steering Wheel Puller to Remove 

Steering Wheels on Late Model GM Vehicles 

■■Steering Wheel Lock-Plate Depressor also Included 


41620D 082171416200 Boxed Steering Service Set 4.36 lb 1 


2291D Crankshaft Pulley Puller (Steering Wheel Puller) - Lock Plate Depressor Frame 

3509D Steering Wheel Lock Plate Remover - Lock Plate Remover Collars & Nut Washer 

3510D Steering Wheel Puller Legs - Screw Package 

3906D Steering Wheel Pivot Pin 

■■Install Tapered Bearing Races and Seals Without Damage to the 

Component or Housing 

■■Includes a Driver Handle Plus 9 Popular Bearing and Seal Drivers 

Ranging From 1.565" to 3.180" 

Bearing Race and Seal Set 


41630D 082171416309 Boxed Bearing Race and Seal Set 4.74 lb 1 


Cat. No. Description Cat. No. Description Cat. No. Description Cat. No. Description Cat. No. Description 

41631D Driver Handle 41633 1.750" Driver 41635 2.325" Driver 41637 2.555" Driver 41639 2.995" Driver 

41632 1.565" Driver 41634 1.961" Driver 41636D 2.470" Driver 41638 2.830" Driver 41640 3.180" Driver 

Axle Nut Set 

■■7 Extra Long 1/2" Drive 6 Point Metric Sockets are Ideal for 

Heavy-Duty Use in Removing and Installing Axle Nuts Use With 

a Ratchet, Breaker Bar, Impact Wrench, or Torque Wrench 


41650 082171416507 Boxed Axle Nut Set 12.39 lb 1 


3907D 29mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford 3908D 35mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 

3161D 30mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 3162D 36mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 

3270D 32mm Deep 1/2" Dr. Deep Axle Nut Socket, Honda/Chrysler 3909D 38mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford 

3449D 34mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 

1156


Spindle Nut Set 

■■6 Chrome Vanadium Steel 1/2" Drive Sockets are for Most 4WD 

SUV's and Light Truck Axle Locknut Applications 

■■Use With a Torque Wrench, Ratchet, or Breaker Bar 


41660D 082171416606 Boxed Spindle Nut Set 13.48 lb 1 


2467 4-Lug 4WD Spindle Nut Socket, 1/2 to 3/4 Ton Dana 44 3910D 4WD Spindle Puller 

2770D 6-Lug 4WD Spindle Nut Socket, 3/4 to 1 Ton Dana 44 3911D Toyota Lock Nut Tool 

3195D 4-Lug Socket with Extension 1/2 Ton Dana 80 3937 4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50 

■■Provides a Wide Range of Puller Applications Such as: Flange Type 

Axles, Oil Seals & Other Press Fit Parts 

■■Jaws Can Be Set Up for 2 or 3 Jaw Internal or External Pulling Jobs 


10 Way Slide Hammer Puller Set 


41700D 082171041709 Boxed 17.0 lb 1 


3591D 5-1/2 lb. Slide Hammer Only 41706 Center Bolt & Cone 230071D Shallow Flange 

41704 2 Way Yoke 41707 3 Pc. Adapter Set 230075D Deep Flange 

41705 3 Way Yoke 41708 Leg Package & Screws 

■■Three Pullers Designed to Make the Removal of Semi-Floating 

Rear Axle Bearings Easier 

■■1" X 1-7/8" Puller 

■■1-5/16 " X 2-3/8" Puller 

■■1-3/8" X 2-7/8" Puller 

Rear Axle Bearing Puller Set 


41710 082171417108 Boxed Rear Axle Bearing Puller Set 3.3 lb 1 

■■Designed for the Removal and Installation of Oxygen Sensors, 

Oil Pressure Sending Units, and Vacuum Switches 

8 Pc. Sensor & Sending Socket Set 


41720 082171417207 Boxed 8 Pc. Sensor & Sending Socket Set 5.68 lb 1 

16 



3919D 1/2" Drive 1-13/16" (29mm) Oil Sender Socket 3923D 3/8" Drive 1-1/16" Deep Oil Pressure Sending Socket 

3920D 3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket 3924D 1/2" Drive 7/8" (22mm) Oxygen Sensor Socket 

3921D 1/2" Drive 1-1/16" Thermal Sensor Socket 3925D 3/8" Drive 7/8" (22mm) Low Profile Offset Oxygen Sensor Socket 

3922D 3/8" Drive 7/8" (22mm) Oxygen Sensor Socket 

1157


■■Contains Long Reach Magnetic Swivel Spark Plug Sockets 

■■Covers Sizes 5/8",13/16", and 9/16" 

3 Pc. Magnetic Spark Plug Set 


41730D 082171417306 Boxed 3 Pc. Magnetic Spark Plug Set 1.67 lb 1 


3931D 9/16" Spark Plug Socket - Magnetic 2.5" Length 3930D 13/16" Swivel Spark Plug Socket - Magnetic 6" Length 

3928D 5/8" Swivel Spark Socket - Magnetic 6" Length 

■■Long Reach 5/8" Magnetic Swivel Spark Plug Socket Set 

■■Lengths of 4", 6", and 11" 

3 Pc. Magnetic Swivel Spark Plug Set 


Product 

Weight 

Shelf 

Pack Qty. 

41740D 082171417405 Boxed 3 Pc. Magnetic Swivel Spark Plug Set 1.96 lb 1 


3927D 5/8" Swivel Spark Plug Socket - Magnetic Plug 4" Length 3929D 5/8" Swivel Spark Plug Socket - Magnetic 11" Length 



■■Complete SAE and Metric Stud Remover Set Offers the Best 

Professional Extractors Available 

■■Designed and Tested to Reach Studs in Difficult Work Areas 


8 Pc. SAE/Metric Stud Removal Set 

Product 

Weight 

Shelf Pack 

Qty. 

41760D 082171417603 Boxed 8 Pc. SAE/Metric Stud Removal Set 2.55 lb 1 


41761 6mm Removal Socket 3/8" Drive 41764 12mm Removal Socket 1/2" Drive 41765 3/8" Removal Socket 1/2" Drive 

41762D 8mm Removal Socket 3/8" Drive 41768D 1/4" Removal Socket 3/8" Drive 41766 7/16" Removal Socket 1/2" Drive 

41763D 10mm Removal Socket 1/2" Drive 41767D 5/16" Removal Socket 3/8" Drive 

1158


■■Perfect for Removing and Inserting Bushings in Cars, Trucks 

Buses, Tractors, Construction and Off-Road Equipment 

■■Set Includes Small, Medium, and Large Drivers and Bushing 

Adapters from 3/8" to 1-3/8" 

General Purpose Bushing Set 


41780D 082171417801 Boxed Gen Purp Bushing Set 4.04 lb 1 


- Bushing Adapter (1-1/16"- 1-3/16") - Bushing Adapter (11/16"-13/16") - Bushing Adapter (7/16"-1/2") 

- Bushing Adapter (1-3/16"- 1-5/16") - Bushing Adapter (13/16"-15/16") - Bushing Adapter (7/8"-1") 

- Bushing Adapter (1/2"-5/8") - Bushing Adapter (15/16"- 1-1/16") - Bushing Adapter (9/16"-11/16") 

- Bushing Adapter (1-1/4"- 1-3/8") - Bushing Adapter (15/32"-17/32") - Driver #1 


- Bushing Adapter (1"-1-1/8") - Bushing Adapter (5/8"-11/16") - Driver #3 

- Bushing Adapter (3/4"-7/8") - Bushing Adapter (5/8"-3/4") - Driver Nut #1 and #2 

■■Use to Remove and Insert Bushings Such As Those in Cars, 

Trucks, Buses, Tractors, Construction and Off-Road Equipment 

■■Sizes are Stamped on Each Bushing Adapter 

■■To Use, Select Proper Size Adapter and Drive Bushing Into Place 

■■Sizes Range from 1-5/16" to 1-3/4" 

9 Pc. Bushing Remover and Inserter Set 


Product 

Weight 

Shelf 

Pack Qty. 

31430 082171314308 Boxed 9 Pc. Bushing Remover and Inserter Set 4.90 lb 1 

16 


- Bushing Adapter (1-1/2 to 1-5/8") - Bushing Adapter (1-5/16 to 1-7/16") - Bushing Adapter (1-9/32 to 1-3/4") 

- Bushing Adapter (1-11/32 to 1-1/2") - Bushing Adapter (1-7/16 to 1-9/16") - Driver #1 

- Bushing Adapter (1-3/4") - Bushing Adapter (1-9/16 to 1-11/16") - Driver Nut 

■■Low Profile Sockets for Better Access 


6 Pc. Oil Canister Socket Set Service Kit 

Product 

Weight 

Shelf 

Pack Qty. 

41890 082171418907 Boxed 6 Pc. Oil Canister Socket Set Service Kit 2.08 lb 1 


3935 24mm Oil Filter Socket 3936 29mm Oil Filter Socket 3934D 36mm Oil Filter Socket 

3933D 27mm Oil Filter Socket 3932D 32mm Oil Filter Socket 3939D 38mm Oil Filter Socket 


1159



3 Pc. Oil Canister Socket Set 


Product 

Weight 

Shelf 

Pack Qty. 

41830 082171418303 Boxed 3 Pc. Oil Canister Socket Set 1.15 lb 1 


3933D 27mm Oil Filter Socket 3932D 32mm Oil Filter Socket 3934D 36mm Oil Filter Socket 

■■For Tubing Service 

■■Broad Tubing Application Including Double Flare, Bend, Cut, 

Ream, and Deburr 

Tubing Service Set 


41590D 082171041594 Boxed Tubing Service Set 3.70 lb 1 


2107D Mini Tubing Cutter 3905D Deburring Tool 41595 Holding Bar 

2189D Tubing Bender 41594 7 Pc. Flaring Adapter Kit 41596 Yoke For Flaring Tool 


Double Flaring Tool Kit 

■■Complete Double Faring Tool Assortment 

■■Slots on Yoke Firmly Engage with Bar Assembly 

■■Includes Corresponding Adapters for Forming Double Flares 

■■Forged Alloy Steel and Hardened 

■■Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE 45° Flares 

■■Hardened Bar Assembly Clamps 7 Tubing Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", and 1/2" 

■■Do Not Use on Stainless Steel Tubing 

■■Additional Set Contents: SAE Bar Assembly, Yoke Assembly, Reamer, 3/16" Flaring Tool 

Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 

7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, and 5/8" Flaring Tool Adapter 

Product Shelf 


Weight Pack Qty. 

41860 082171418600 Carded Double Flaring Tool Kit (replaces 2199 & 3869) 4.05 lb 1 


3905D Deburring Tool 41594 7 Pc. Flaring Adapter Kit 41595 Holding Bar 41597 Universal Yoke 

1160


Bubble Flaring Tool Kit 

■■Complete Bubble Flaring Tool Assortment 




■■Precisely Flares Tubing Up to 0.040" Wall Thickness to Metric 45° Flares 

■■Hardened Bar Assembly Clamps 4 Tubing Sizes: 4.7, 6, 8, & 10mm 


■■Additional Set Contents: Metric Bar Assembly, Yoke Assembly, Reamer, 47mm 

Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, and 

10mm Flaring Tool Adapter 

Product Shelf 



41870 082171418709 Carded Bubble Flaring Tool Kit (replaces 3482) 4.35 lb 1 


3905D Deburring Tool 41597 Universal Yoke 41598D Bubble Flaring Tool Holding Bar 41599 4 Pc. Bubble Flaring Adapter Kit 

Combined Double / Bubble Flaring Tool Kit 

■■Complete Double and Bubble Flaring Tool Assortment 




■■Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE/Metric 45° Flares 

■■Hardened Bar Assembly Clamps 11 Tubing Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", 1/2", 47, 

6, 8, and 10mm 

■■Additional Set Contents: SAE Bar Assembly, Metric Bar Assembly, Yoke Assembly, Reamer, 

Cutter, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" 

Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, 5/8" Flaring Tool 

Adapter, 4.7 mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, 

10mm Flaring Tool Adapter, and Cutter 

16 

Product Shelf 



41880D 082171418808 Boxed Combined Double / Bubble Flaring Tool Kit 7.35 lb 1 


3905D Deburring Tool 41597 Universal Yoke 41598D Bubble Flaring Tool Holding Bar 41599 4 Pc. Bubble Flaring Adapter Kit 

41595 Holding Bar 

■■Includes the Tools Needed to Remove the Radio From the Dash on Many 

Domestic and Import Vehicles Without Damage to the Radio or the Dash Panel 

■■Antenna Nut Sockets Fit Over Antennas and Down Into Deep Well Locations 

■■Set Includes: Radio Removal Tool, Key Set, Antenna Nut Socket Set 

Radio Removal & Antenna Wrench Set 

Product Shelf 



41680D 082171416804 Carded Radio Removal & Antenna Wrench Set 2.06 lb 1 


1161

E N G I N E T O O L S 

Mechanic’s Stethoscope 

■■Stethoscope Locates the Source of Engine Noise Quickly 

■■Listen for Trouble By Tracing the Sound of Flowing Water, Oil, Gas or Steam 

■■Identify Piston Slap, Worn Gears, Faulty Valves, Water Pump Failure, 

Damaged Gaskets and Defective Bearings 

■■Stethoscope Has a Shock-Resistant Handle and Disassembles for Storage 


835D 082171008351 Carded Mechanic's Stethoscope 0.25 lb 1 

■■Ideal for Use on Radiator Hoses, Heater Hoses, Water, Air, Vacuum and Fuel Lines 

■■Capacity 3/4" Outside Diameter 


■■Clamping Mechanism Locks Automatically - No Screws Or Levers to Set Or Adjust 


Small Hose Pinch-Off Pliers, 3/4" O.D. Capacity 


3791 082171037917 Carded 5-1/2 in 3/4 in 0.43 lb 1 


Medium Hose Pinch-Off Pliers, 1-1/4" O.D. Capacity 







3792D 082171037924 Carded 9-1/4 in 1-1/4 in 0.75 lb 1 






Large Hose Pinch-Off Pliers, 2-1/2" O.D. Capacity 


3793 082171037931 Carded 14 in 2-1/2 in 1.24 lb 1 

Hose Pinch Off Pliers 

■■Pliers Eliminate the Need to Drain Cooling System When Servicing 

■■Pliers Squeeze Hoses Shut and Jaws Swivel for Parallel Clamping 

■■Automatic Locking Ratchet 

■■Do Not Use on Wire-Reinforced Hose 


145 082171001451 Carded 0.85 lb 1 

1162


■■For Corbin Style Hose Clamps 

■■Plier Tips Trap and Hold Clamp, and Swivel for Multiple Angle Access 



Corbin Style Hose Clamp Pliers 


3975D 082171397509 Carded 0.74 lb 1 




Straight Hose Clamp Pliers 


3976D 082171397608 Carded 0.75 lb 1 


■■Angled Jaws Give Improved Access Around Obstructions 



Angled Hose Clamp Pliers 


3977 082171397707 Carded 0.84 lb 1 

16 

■■For Flat Ear Style Hose Clamps 

■■Plier Tips Trap and Hold Clamp, and Swivel for Multiple Angle Access 



Heavy-Duty Large Hose Clamp Pliers 


3978D 082171397806 Carded 0.85 lb 1 


1163


Remote Control Starter Switch 

■■Use to Bypass the Ignition Switch on Any Engine With a Solenoid Starter Switch 

■■Switch Lets You Crank the Engine While Working in the Engine Compartment 

■■Switch is Made of Heavy-Duty Construction and Has 32"-Long Leads 

■■To Use, Connect From the Positive Battery Terminal to the Energizing Terminal of Solenoid 

■■Use the Switch for GE Generator, Starter, Electrical, Fuel Pump and Compression Tests 

and for Setting Ignition Points and Adjusting Tappets 

■■6 and 12 Volt Use Only 

■■Wire Rated Capacity 8 Amp 

■■Caution: Care Should Be Taken to Keep Away From Hot or Rotating Components 


124DD 082171001246 Carded Remote Control Starter Switch 0.40 lb 1 

■■Tool Removes and Installs Upper Rear Main Oil Seals With Engine and 

Crank-Shaft in Place 

■■IWorks on Both Wick- and Neoprene-Type Seals 

■■Chinese Finger-Type Grip Won't Slip From the Seal During Installation 

■■Set Includes a Wick Seal Remover, Installer, Guide Funnels, Pusher, 

Offset Trimmer and Neoprene Seal Punches 

Oil-Seal Remover and Installer 


492 082171004926 Carded Oil-Seal Remover and Installer 0.40 lb 1 


Flywheel Turner 

■■Hook This Tool Into Flywheel Teeth to Rotate the Crankshaft 

■■Use When Working on Clutches, Transmissions, Installing Rings or 

Other Jobs That Require the Crankshaft to Be in a Specific Position 

■■Spring Tension Aids Tool Engagement on the Flywheel 


2270 082171022708 Carded Flywheel Turner 0.88 lb 1 

Universal Compression Tester Kit 

■■This Versatile Kit Provides a Quick Method to Obtain Cylinder Compression 

Pressure on Engines With Deep, Recessed Spark Plugs and Difficult Access 

■■A Special Air-Hold Valve is Included for Easy Resetting of the Gauge, Which 

is Graduated From 10 to 300 PSI (0 to 21Kg/Cm2) 

■■Gauge Assembly Includes Pressure Relief Valve 

■■Caution: Do Not Use With Engine Running for Intended Use Only 


3305D 082171033056 Carded Compression Tester 1.05 lb 1 

1164


Compression Tester 

■■Tester Checks Cylinder Compression from 0 to 300 PSI (0 to 21 kg/cm2) 

■■Adapters fit 14 and 18mm Spark Plug Holes and Special Air-Hold Valve 

is included to Reset Gauge Easily 

■■Tester has a 16" Rubber Hose and is a Serviceable Product 


2428D 082171024283 Carded Compression Tester 0.90 lb 1 

242875 082171337642 Carded Replacement Gauge 0.12 lb 1 

4 Pc. Diesel Compression Test Kit 

■■Set Includes a Compression Gauge With Protective Boot and Special Air-Hold 

Valve for Easy Reset and Three Brass Adapters 

■■Brass Adapters are: 24mm X 20 to Test VW, Volvo, Audi, Dodge, Mercedes 

& Cummings 5.9-L; 10mm X 10 to Test GM 4.3-L 6 Cyl, 4.3-L & 5.7-L 8 Cyl, 

Ford/Navistar 6.9-L & 7.3-L, International Harvester 6.9-L; 10mm X 10 to Test 

GM 6.2-L V8 

■■Gauge Checks from 0 to 1000 PSI (0 to 70Kg/Cm2) 

■■Features a Quick Disconnect from Gauge to Adapters 

■■Kit Comes in a Blow Mold Case 


3468 082171034688 Carded 

4 Pc. Diesel Compression 

Test Kit 

1.45 lb 1 

■■Set Includes a Compression Gauge With Protective Boot and Special Air-Hold 

Valve for Easy Reset, One Extension, Two Hand-Held Adapters and Flexible 

Line, With Three Brass Adapters 


■■Gauge Checks From 0 to 300 PSI (0 to 21Kg/Cm2) 

■■Brass Adapters are 10mm, 12mm & 14mm and Attach to Flex Line With 14mm 

& 18mm Threads 

■■Kit Comes in Blow Mold Case 

8 Pc. Air Hold and Compression Check Kit 


3469 082171034695 Carded 

8 Pc. Air Hold and 

Compression Check Kit 

2.70 lb 1 

Hand-Held Tachometer 

■■Tachometer Checks Diesels, Pumps, Compressors, Power Take-Offs and 

Farm and Construction Equipment Revolution Speed 

■■Tool is Ideal Where Electric Tachometer Cannot Be Used 

■■To Use, Hold Rubber Tip Against End of Rotating Shaft and Read Revolutions 

Per Minute Directly From Dial 

■■Range is 100 to 4000 RPM (Clockwise or Counterclockwise) 

■■Length: 4-1/4" 

■■Diameter: 2-3/4" 

16 



2967 082171029677 Carded Hand-Held Tachometer 0.75 lb 1 

1165


■■14" Long Hose Incorporates Special 14 and 18mm Stepped Fitting With O-Ring 

Seals for Universal Fit and 1/4" NPT Fitting for Easy Connection to Air Lines 

■■Used With Valve Spring Compressors 912DD, 2078D and 3271DD 

■■Long Hose is Ideal for Reaching Deep Set Spark Plug Holes 

14 and 18mm Air Hold Extension Hose 


2992D 082171029929 Carded 14 and 18mm Air Hold Extension Hose 0.30 lb 1 

2 Pc. Air Hold Fitting Set 

■■Use to Apply Air Pressure to keep Valve Closed while replacing Valve Spring 

■■Set Includes 14 and 18mm Adapters Threaded for 1/4" NPT 

■■To use, Remove Spark Plug and Screw Air Hold into Port 

■■Fasten Air Hose to Fitting and Apply Pressure 

■■Use with 912DD, 2078D or 3271DD Valve Spring Compressors 

■■Caution: Vehicle must be Placed in Park/Neutral before Applying Air Pressure, otherwise 

Vehicle may move 

■■Keep Hands Clear of Fan, Belts and Pulleys since Slight Crankshaft Rotation will Occur 

Cat. No. UPC No. Description Product Weight Shelf Pack Qty. 

901DD 082171009013 2 Pc. Air Hold Fitting Set 0.23 lb 1 


Oil Pressure Check Kit 

■■Test Engine Oil Pressure at the Oil Filter on Most Passenger Cars and Light Trucks 

■■Five Different Adapters are Included for Both Domestic and Imported Engines 

■■Gauge is Calibrated From 0 to 100 PSI 


3289 082171032899 Carded Oil Pressure Check Kit 2.65 lb 1 

Engine/Automatic Transmission 

Oil Pressure Check Kit 

■■Use on All Domestic Cars and Light Trucks, As Well As Most Import Cars and Light Trucks 

■■Kit Includes: 2-1/2" Gauge Ranging From 0 to 300 PSI, 6" Neoprene (Oil-Proof) Hose, Brass 

Adapters for Sae and Metric and an Instruction Sheet 


3343D 082171033438 Carded Engine/Automatic Trans. Oil Pressure Check Kit 1.25 lb 1 

1166


■■Install and Remove 12-Point (Triple Square) Metric Socket-Head 

Screws by Turning with a Socket or Wrench 

■■Made From Heat-Treated Alloy Steel 

12 Point Serrated Wrenches 


2304D 082171023040 Carded 8mm Serrated Wrench 0.08 lb 1 




■■Stiff Tempered-Steel Blade is Ideal for Scraping Dirt, Carbon and 

Paint and for Applying Putty 

■■Blade is Ground to a Mirror Finish 


2425D 082171024252 Carded 1-1/4" Scraper 0.15 lb 1 

3" Scraper 

■■Stiff Tempered-Steel Blade is Ideal for Scraping Dirt, Carbon and 

Paint and for Applying Putty 

■■Blade is Ground to a Mirror Finish 


2426D 082171024269 Carded 3" Scraper 0.24 lb 1 

16 

Ramo-Matic Zerk Fitting Tool 

■■Tool Clears Grease Fittings of Hardened Matter 

■■Fits Straight and Angled Zerk-Type Fittings 

■■To Use, Fill With Oil or Grease, Hold Against Zerk Fitting and Strike With 

a Hammer to Clear Away Debris 


416D 082171004162 Carded Ramo-Matic Zerk Fitting Tool 0.40 lb 1 

2 Pc. Fuel Line Kit 

■■Set Includes Disconnect Tools for Use on Many Ford, GM and Mazda Vehicles 

■■Also Used on Chrysler and Ford A/C Line Adapters 

■■Tools Also Available Individually 



61059 082171610592 Carded 2 Pc. Fuel Line Kit 0.30 lb 1 


3290D Ford A/C and Fuel Line Spring Lock Coupling Tool 3321 Fuel Line Quick Disconnect Tool 

1167


■■Most Ford Vehicles are Equipped With Spring Lock Couplings on 

Fuel and Air Conditioning Lines 

■■Necessary Tool Releases Locking Mechanism on All 4 Sizes: A 

(3/4"), B (5/8"), C (1/2") and D (3/8") 

Ford A/C and Fuel Line Spring Lock Coupling Tool 


3290D 082171032905 Carded Ford A/C and Fuel Line Spring Lock Coupling Tool 0.20 lb 1 

■■Tool Releases the Fuel Line Locking Mechanism on 1989 and 

Newer GM, 1990 and Newer Ford and Some 1990 and Newer 

Mazda Vehicles Fits 5/16" and 3/8" Fuel Lines 

Fuel Line Quick Disconnect Tool 


3321 082171033216 Carded Fuel Line Quick Disconnect Tool 0.15 lb 1 


■■Sizes Include: 7/8" (22mm), 3/4" (19mm), 5/8" (16mm) 3/8" (9mm) and 7/16" (8mm) 

■■Contains Five Popular Size Air Conditioning and Fuel Line Quick Disconnect Tools for 

Hard to Reach Areas 

■■Flexible Plastic Design Allows for Easy Application Over Tubing to Access Disconnects 

5 Pc. Low Profile Fuel Line Quick Disconnect Set 


3530D 082171035302 Carded 5 Pc. Low Profile Fuel Line Quick Disconnect Set 0.60 lb 1 

Ford Fuel Line Coupling Tool 

■■Use on 1990 and Newer Ford Rangers and Explorers with 4.0-L, 6-Cylinder Engines 

■■Provides Easy, Damage-Free Fuel Line Separation, at the Fuel Pressure Regulators 


3408D 082171034084 Carded Ford Fuel Line Coupling Tool 0.06 lb 1 

1168


■■Disconnect Tools that Separate Fittings on Fuel, Filter, 

Transmission, Air Conditioning Systems and Fuel Tank Return 

Lines on Most Vehicles, Trucks and Other Heavy Equipment 

12 Pc. Fuel & Trans Line Disconnect Set 

Product Shelf 



41500 082171415005 Boxed 12 Pc. Fuel & Trans Line Disconnect Set 3.53 lb 1 


3321 Fuel Line Quick Disconnect Tool 3894 Ford Auto Transmission to Radiator Line Disconnect Tool 

3408D Ford Fuel Line Coupling Tool 3895D Disconnect for Fuel Lines Sizes 1/4" - Black 

3413D Ford Clutch Coupling Tool 3896D Disconnect for Fuel Lines Sizes 5/16" - Red 

3890D Chrysler Quick Disconnect Tool 3897D Disconnect for Fuel Lines Sizes 3/8" - Gold 

3891D GM Transmission Oil Cooler Line Disconnect Tool 3898D Disconnect for Oil Cooler Line - Blue 

3892D GM Hydraulic Clutch Line Disconnect Tool - Replacement Bands 

3893D Transmission Oil Cooler Line Disconnect Tool 

Chrysler Quick Line Disconnect Tool 


3890D 082171389009 Carded Chrysler Quick Disconnect Tool 0.15 lb 1 

16 

GM Transmission Oil Cooler Line Disconnect Tool 

■■Works on Ford EFI Fuel Lines With Hair Pin Connectors; Works on Radiator to Transmission 

Oil Cooler Lines for 1987 - Current Cadillac Eldorado, Seville and Concours, Buick Riviera and 

Reatta, and Olds Toronado;1989 - Current GM 1/2 Ton, 3/4 Ton, and 1-Ton Pick-Ups 

Product Shelf 



3891D 082171389108 Carded GM Transmission Oil Cooler Line Disconnect Tool 0.15 lb 1 

GM Hydraulic Clutch Line Disconnect 

■■Removes Clutch Lines From Slave Cylinders During Clutch Master Cylinder, Slave Cylinder or Clutch 

Assembly Service 

■■Bent End Applications: Nvg3500 Manual Transmissions on 1966-Current Full-Size 2WD and 4WD Trucks 


3892D 082171389207 Carded GM Hydraulic Clutch Line Disconnect Tool 0.15 lb 1 


1169


GM Transmission Oil Cooler Line Disconnect Tool 

■■Works on Transmission Oil Cooler Lines On: 1987-Newer Olds Toronado, Buick Riviera and Reatta, 

Cadillac Eldorado, Seville and Concours; and 1989-Newer GM 1/2", 3/4", and 1-Ton Pickups 


Product 

Weight 

3893D 082171389306 Carded Transmission Oil Cooler Line Disconnect Tool 0.15 lb 1 

Shelf Pack 

Qty. 

■■Disconnects Transmission to Radiator Oil Cooler Line Quick Connect Fittings 

■■AOD, ATX, or AXOD Transmissions 

Ford Auto Transmission to Radiator Line 

Disconnect Tool 


3894 082171389405 Carded 

Ford Auto Transmission to 

Radiator Line Disconnect Tool 

Product 

Weight 

Shelf 

Pack Qty. 

0.15 lb 1 

Disconnect for Fuel Lines Sizes 1/4" - Black 


Product 

Weight 

Shelf 

Pack Qty. 

3895D 082171389504 Carded Disconnect for Fuel Lines Sizes 1/4" - Black 0.15 lb 1 



Disconnect for Fuel Lines Sizes 5/16" - Red 

Product 

Weight 

Shelf 

Pack Qty. 

3896D 082171389603 Carded Disconnect for Fuel Lines Sizes 5/16" - Red 0.15 lb 1 

■■Also Works on 3/8" Oil Cooler Lines 


Disconnect for Fuel Lines Sizes 3/8" - Gold 

Product 

Weight 

Shelf 

Pack Qty. 

3897D 082171389702 Carded Disconnect for Fuel Lines Sizes 3/8" - Gold 0.15 lb 1 

Disconnect for Oil Cooler Line - Blue 


Product 

Weight 

Shelf 

Pack Qty. 

3898D 082171389801 Carded Disconnect for Oil Cooler Line - Blue 0.15 lb 1 

1170


Ford 7.3L Fuel Filter Tool 

■■Design Allows for Easy Removal and Installation of Ford 7.3L Diesel Fuel 

Caps and Other Diesel Filter Systems Using the Same Configuration 

■■Works With Fuel Caps From 1995 and Newer 

■■Improves Ability to Remove and Install Caps Where Access is a Problem 

■■Patented 


3526D 082171035265 Carded Ford 7.3L Fuel Filter Tool 0.40 lb 1 

■■Set Includes Fuel Line Pressure Gauges, Adapters, and Other 

Components Required to Work on Fuel Injection Systems 


33 Pc. Fuel Injection System Tool Kit 


Product 

Weight 

Shelf Pack 

Qty. 

3467 082171034671 Boxed 33 Pc. Fuel Injection System Tool Kit 8.60 lb 1 

Fuel Pump Vacuum and Pressure Tester 

■■Test for Fuel Line Pressure and Vacuum Leaks and Check for Leaky Valves, Timing, Fuel Pump 

Vacuum and Pressure and Gas Line Leakage 

■■Tester is Equipped With an Easy-To-Read Gauge With a 3" Hose and a Vacuum Hose Adapter Fitting 

■■Gauge Measures Vacuum From 0 to 28" Hg in 1" Increments (0 to 700mm Hg in 50mm Increments) 

■■Also Measures Pressure From 0 to 15 PSI in 1/2 PSI Increments (0 to 1 Kg/Cm2 in 01 Kg/Cm2 

Increments) 

■■Gauge Diameter 2-11/16" 

■■Caution: Not for Use on Fuel Injected Vehicles 


Product 

Weight 

Shelf Pack 

Qty. 

2521D 082171025211 Carded Fuel Pump Vacuum and Pressure Tester 0.55 lb 1 

■■Tests Fuel Pump Pressure on AM, Chrysler, Ford, Honda, GM and Mazda Vehicles 

■■Tester can also be used on Most Foreign Vehicles not Equipped With Bosch CIS 

■■Gauge - 3-3/4" Diameter, 145 PSI 

■■Kit Comes in Blow Mold Case 


EFI Pressure Tester (Multiport Fuel Injection) 

Product 

Weight 

Shelf Pack 

Qty. 

3386 082171033865 Carded EFI Pressure Tester (Multiport Fuel Injection) 3.66 lb 1 

16 


1171


■■Designed for the Removal and Installation of Oxygen Sensors, 

Oil Pressure Sending Units, and Vacuum Switches 

8 Pc. Sensor & Sending Socket Set 


Product 

Weight 

Shelf 

Pack Qty. 

41720 082171417207 Boxed 8 Pc. Sensor & Sending Socket Set 5.68 lb 1 


3919D 1/2" Drive 1-13/16" (29mm) Oil Sender Socket 3923D 3/8" Drive 1-1/16" Deep Oil Pressure Sending Socket 

3920D 3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket 3924D 1/2" Drive 7/8" (22mm) Oxygen Sensor Socket 

3921D 1/2" Drive 1-1/16" Thermal Sensor Socket 3925D 3/8" Drive 7/8" (22mm) Low Profile Offset Oxygen Sensor Socket 

3922D 

3/8" Drive 7/8" (22mm) Oxygen Sensor Socket 

1-13/16 (29mm) 1/2" Drive Oil Sender Socket 

■■1-3/16" (29mm) 1/2" Drive Oil Sender Socket 

■■Fits 1-3/16" Oil Pressure Sending Units Found on Late-80's and Mid-90's GM Vehicles 

■ ■(90mm Long) 


Product 

Weight 

Shelf 

Pack Qty. 

3919D 082171391903 Carded 1/2" Drive 1-13/16" (29mm) Oil Sender Socket 0.20 lb 1 


■■Removes and Installs Vacuum Switches with a 7/8" Hex 

■■Also Fits Some Oxygen Sensors (90mm Long) 


7/8" Slotted Socket for PVS, TVS, and O2 Socket 

Product 

Weight 

3920D 082171392009 Carded 3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket 0.20 lb 1 

■■Remove and Install 1973-1977 GM Thermal Sensor Switch 

■■Also Fits Some Oil Pressure Sending Units (85mm Long) 

Shelf 

Pack Qty. 

1/2" Drive 1-1/16" Thermal Sensor Socket 


3921D 082171392108 Carded 1/2" Drive 1-1/16" Thermal Sensor Socket 0.20 lb 1 

1172


■■Removes and Installs Oxygen Sensors in Most Domestic and Some Imported Vehicles 

■■Slotted Socket Allows for Wire Clearance 

■■80mm Long 

7/8" (22mm) 3/8" Drive Oxygen Sensor Socket 


Product 

Weight 

Shelf 

Pack Qty. 

3922D 082171392207 Carded 3/8" Drive 7/8" (22mm) Oxygen Sensor Socket 0.20 lb 1 

■■Deep Well Allows for Up to 2-5/8" Clearance (74mm Long) 

■■Works on Most 1991 and Newer GM Vehicles Using Oil Pressure Gauge: 4 

Cylinder & 3.1 Liter V6 

■■1987 and Newer Chrysler Vehicles With Light and Gauge Oil Pressure Switches 


1-1/16" 3/8" Drive Deep Oil Pressure Sending Socket 

Product 

Weight 

Shelf 

Pack Qty. 

3923D 082171392306 Carded 3/8" Drive 1-1/16" Deep Oil Pressure Sending Socket 0.20 lb 1 

■■Offset End Has Double Hex 1/2" Drive for Access (50mm Long) 

7/8" (22mm) Oxygen Sensor Socket 


Product 

Weight 

3924D 082171392405 Carded 1/2" Drive 7/8" (22mm) Oxygen Sensor Socket 0.20 lb 1 

Shelf Pack 

Qty. 

16 

■■Removes and Installs Oxygen Sensors in Most Domestic and Some Imported Vehicles 

■■30mm Long 

7/8" (22mm) Low Profile Offset Oxygen Sensor Socket 


3925D 082171392504 Carded 

3/8" Drive 7/8" (22mm) Low Profile Offset 

Oxygen Sensor Socket 

■■For Access to Some Chrysler Vehicles (54mm Long) 

0.20 lb 1 

1-1/16" 3/8" Drive Short Access Socket 



3926D 082171392603 Carded 1-1/16 3/8"DR Short version socket 0.20 lb 1 

1173


GM Carburetor Adjusting Tool 

■■For Adjusting Idle/Mixture Screws on GM and Chrysler Carburetors 

■■Heavy-Duty Flexible Shaft for Easy Access 

■■Tool is Zinc Plated to Resist Rust 

■■Note: Be Sure Fluted End of Filter Matches Wrench 

■■Four Adapters Conveniently Store in the Comfortable Handle 

■■Adapters: Double “D” for GM, '79 and Newer; 4.5mm Hex for '78 and '79 GM; 1/4 

“Hex for Pre-'78 GM; 3/32” Hex for '78 and Newer Chrysler, 1.7L-2.2L Engines 


2776D 082171027765 Carded GM Carburetor Adjusting Tool 0.15 lb 1 

■■Patented Tool Combines the Innovation of a GearWrench® Ratcheting Wrench 

with the Requirements of the Serpentine Belt Removal Tool to Provide the 

Professional with the Best Possible Combination 

■■Includes Drive Tools: Long Bar, Special GearWrench® Ratcheting Wrench, and 

3/8", 1/2" and 3/4" Adapters 

■■Includes 6 Point Sockets: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm 

■■Includes Crowsfoot: 13mm, 14mm and 15mm 

15 Pc. Ratcheting Serpentine Belt Tool Set 


3680D 082171036804 Boxed 

15 Pc. Ratcheting Serpentine 

Belt Tool Set 

3.70 lb 1 


Serpentine Belt Tool 

■■Tool is Used to Release Tension on Serpentine Belt Self-Adjusting Idler Pulley 

■■Just Push or Pull to Release Tension 

■■Crow Foot Wrenches Provide Maximum Coverage and Access 

■■Includes Drive Tools: Long Bar and Short Bar 

■■Includes 12 Point Sockets: 13mm, 15mm, 16mm, 18mm and 19mm 

■■Includes Crowsfoot: 13mm, 14mm and 15mm 


3414D 082171034145 Carded Serpentine Belt Tool 3.01 lb 1 

Serpentine Belt Stretch Tool 

■■Finger that Rocks Belt in Place instead of Twisting, Preventing Belt Damage 

■■Hardened Steel Pulley Pivot for Long Life 

■■Anodized Aluminum Body for Corrosion Resistance 


3681D 082171036811 Carded Serpentine Belt Stretch Tool 0.12 lb 1 

1174


■■Ergonomic Spring-Loaded Handle Remotely Activates the Belt 

Grabber for Belt Routing 

■■Grabber Fingers Easily Control the Serpentine Belt During 

Installation / Removal 

■■Works Faster and Easier than Standard Belt Hook Tools 

■■Corrosion Resistant Steel to Promote Long Life 

Serpentine Belt Grabber Tool 


3684D 082171036842 Carded Serpentine Belt Grabber Tool 0.78 lb 1 

Fan Clutch Service Set 

■■Covers Most Vehicles With Bolt on Pulleys and Also Newer Chrysler Engines 

With Press on Pulleys Requiring Special Pins to Hold Housing 

■■Features the Patented Universal Pulley Holder 


41580D 082171414572 Boxed Fan Clutch Service Set 14.12 lb 1 


3422 40mm Fan Nut Wrench 3901D Pulley Holder Pin Set Small (8mm) - 36mm Fan Nut Wrench 

3473 Fan Clutch Wrench - Diesel 3902D Pulley Holder Pin Set large ( 10mm, 18mm) - 50mm Fan Nut Wrench 


■■Universal Puller Holder Eliminates the Need for Various Size 

Holding Wrenches 

■■Used to Remove and Replace Thermostatic Fan Assemblies 

■■Applications Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 

4.9-L, and 5.0-L Engines; Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 

8.0-L V10 Engines; GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines 

Pulley Holder / Fan Clutch Tool Kit 


3472 082171034725 Carded Pulley Holder / Fan Clutch Tool Kit 5.10 lb 1 


3422 40mm Fan Nut Wrench 3901D Pulley Holder Pin Set Small (8mm) 


Universal Pulley Holder 

■■Unique Time Saving Tool is Designed to Trap and Hold Bolt-On 

Pulleys By the Mounting Bolts on Most Applications 

■■When Used in Conjunction With Fan Clutch Wrenches it is Especially 

Useful in Removing and Replacing Thermostatic Fan Assemblies 

while Eliminating the Need for Various Size Holding Wrenches 

■■Applications for Use in Fan Clutch Removal Include: Ford Trucks 

W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, and 5.0-L Engines 

■■Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L and V10 Engines 

■■GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines 

■■Jeeps W/5.2-L Engines 

16 



3900 082171390005 Carded Universal Pulley Holder 1.50 lb 1 

1175


■■Wrench Removes Thermostatic Fan Assembly on 1993 and 

Newer 4.9-L Ford Engines 

■■Opening is 40mm (1.575") 


Ford Fan Clutch Wrench, 4.9 L 

Product 

Weight 

Shelf 

Pack Qty. 

3422 082171034220 Carded 40mm Fan Nut Wrench 0.26 lb 1 

Fan Clutch Wrench - Diesel 

■■Use in Conjunction With the Universal Pulley Holder (3900) to Remove and 

Replace the Thermostatic Fan Assembly on Ford 6.9-L, 7.3-L, and 7.3-L 

Diesel Engines 

■■Use With 1/2" Drive Tools and a Torque Wrench 

■■Refer to Factory Service Manual for Torque Specifications and Thread 

Direction 

■■Wrench Opening is 48mm (1.889") 



Weight Qty. 

3473 082171034732 Carded Fan Clutch Wrench - Diesel 1.53 lb 1 


■■Designed for Fan Clutch Removal on 2003 and Newer Ford 6.0-L Powerstroke 

Engines 

■■Unique Fan Clutch Wrench Grips and Securely Holds the Pulley Housing 

■■Fan Clutch Holding Tool to Loosen and Remove Oval or Round Hole Holding Nut 


3950 082171395055 Carded 

2 Pc. Fan Clutch Pulley Holder 

Set - Ford Powerstroke 6.0 Liter 

2 Pc. Fan Clutch Pulley Holder Set - Ford 

Powerstroke 6.0 Liter 

Product 

Weight 

Shelf 

Pack Qty. 

11.24 lb 1 

■■Holds Crankshaft in Place Allowing for Removal of Hard-To-Loosen Crankshaft 

Damper Bolts 

■■Proper Angle Ensures Easy Access to Crankshaft Damper Bolts 

■■Fits Most Honda & Acura 4-Cylinder Applications From 1990 and Up 

■■Easy to Use One Man Operation Tool Speeds Up Repair 

■■Works With 1/2" Square Drive 

Honda Acura Crankshaft Holding Tool 

Product Shelf 



3970D 082171397004 Carded Honda Acura Crankshaft Holding Tool 1.2950 lb 1 

1176


Pulley Puller and Installer Set 

■■Remove Pressed-On Alternator and Power Steering Pulleys on GM, Ford, 

Chrysler Engines 

■■Threaded End Installs GM Alternator and Power Steering Pulleys, Including 

Quad 4 

■■Reverse the Jaws to Pull the Alternator Internal Bearing 

■■Will Not Work on 3.3-L and 3.5-L Chrysler Engines 



Product 

Weight 

Shelf 

Pack Qty. 

2897D 082171028977 Carded Pulley Puller and Installer Set 2.25 lb 1 


289780 Replacement part: Puller Body 289784 Replacement part: Bearing and Washer 289788 Replacement part: Screw Installer for GM 3.1 

289781 Replacement part: Jaw & Sleeve Assembly 289785 Replacement part: Puller Pin for Quad 4 289789 Replacement part: Screw Installer for Ford 4.6 

289782 Replacement part: Jackscrew 289786 Replacement part: Screw Installer for Quad 4 289790 Replacement part: Screw Installer for Others 

289783 Replacement part: Button 289787 Replacement part: Puller Pin for GM 3.1 

Power Steering Pump Puller Set 

■■Removes and Installs Power Steering Pump Pulleys Off Most Domestic Vehicles 


41560D 082171041563 Boxed 4.23 lb 1 


3893D Transmission Oil Cooler Line Disconnect Tool 41561D Bushing and Screw Set A 41562D Bushing and Screw Set B 

16 

General Purpose Bushing Set 

■■Perfect for Removing and Inserting Bushings in Cars, Trucks Buses, Tractors, 

Construction and Off-Road Equipment 

■■Set Includes Small, Medium, and Large Drivers and Bushing Adapters from 3/8" 

to 1-3/8" 


41780D 082171417801 Boxed Gen Purp Bushing Set 4.04 lb 1 


- Bushing Adapter (1-1/16"- 1-3/16") - Bushing Adapter (11/16"-13/16") - Bushing Adapter (7/16"-1/2") 

- Bushing Adapter (1-3/16"- 1-5/16") - Bushing Adapter (13/16"-15/16") - Bushing Adapter (7/8"-1") 

- Bushing Adapter (1/2"-5/8") - Bushing Adapter (15/16"- 1-1/16") - Bushing Adapter (9/16"-11/16") 



- Bushing Adapter (1"-1-1/8") - Bushing Adapter (5/8"-11/16") - Driver #3 

- Bushing Adapter (3/4"-7/8") - Bushing Adapter (5/8"-3/4") - Driver Nut #1 and #2 


1177


■■Use to Remove and Insert Bushings Such As Those in Cars, Trucks, Buses, 

Tractors, Construction and Off-Road Equipment 

■■Sizes are Stamped on Each Bushing Adapter 

■■To Use, Select Proper Size Adapter and Drive Bushing Into Place 

■■Sizes Range from 1-5/16" to 1-3/4" 


9 Pc. Bushing Remover and Inserter Set 

Product 

Weight 

Shelf 

Pack Qty. 

31430 082171314308 Boxed 9 Pc. Bushing Remover and Inserter Set 4.90 lb 1 


- Bushing Adapter (1-1/2 to 1-5/8") - Bushing Adapter (1-5/16 to 1-7/16") - Bushing Adapter (1-9/32 to 1-3/4") 

- Bushing Adapter (1-11/32 to 1-1/2") - Bushing Adapter (1-7/16 to 1-9/16") - Driver #1 

- Bushing Adapter (1-3/4") - Bushing Adapter (1-9/16 to 1-11/16") - Driver Nut 

Seal Puller 

■■Use Tool to Remove Oil and Grease Seals on Automobiles and Light Trucks 

■■Puller Has 2 Tip Sizes for Most Applications 

■■To Use, Insert Tip Behind Seal and Use Leverage to Remove 

■■Caution: Do Not Use As a Striking Tool 

■■For Intended Use Only 


3245 082171032455 Carded Seal Puller 0.55 lb 1 


Master Bolt Grip Set 

■■Works on Harmonic Balancers, Steering Wheels, Crankshaft Pulleys, and Gears 

■■Capable of Handling Almost Every Two or Three-Way Bolt Pull Possible on Most 

Cars, Pickups, SUV's, and Small Engines 


41600 082171041600 Boxed 7.16 lb 1 


41601 3 Way Yoke for Bolt Grip Set 41603 Bolt Sets (Black Metric) 41605 Center Screws for Puller 

41602 4 Pc. Puller Tip Set 41604D Bolt Sets (Zinc SAE) 

■■Installs Drive Pulleys on Harmonic Balancers 

■■Complete Range of Adapters 

■■Comes With Thrust Bearing for Ease of Use 

Harmonic Balancer Installer 


36790D 082171367908 Boxed Harmonic Balancer Installer 3.34 lb 1 


367971 Adapter 14mm x 1.5 367976 Adapter 7/16 x 20 367982 10mm X 1.5 Adapter for 36790 Kit 

367972 Adapter 16mm x 2.0 367977 Adapter 9/16 x 18 367983 12mm X 1.75 Adapter for 36790 Kit 

367973 Adapter 1/2 x 20 367978 Adapter 12mm x 1.5 367984 14mm X 2.0 Adapter for 36790 Kit 

367974 Adapter 3/4 x 16 367980 Center Screw 367985 16mm X 1.5 Adapter for 36790 Kit 

367975 Adapter 5/8 x 18 367981 Bushing and Washer Kit 

1178


■■Puller Removes Balancers, Pulleys, and Gears with Tapped Holes 

■■Floating Swivel Prevents Damage to the Shaft End 

■■Four Slots in the Yoke Allow for 2- or 3-Hole Applications 

■■Tool Bolts to Balancer with Center Screw on the End of the 

Crankshaft 

■■Tighten while Tapping on the Screw Head to Remove Balancer 

■■Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10mm x 

1.5 Screws for most American and Imported Cars 

Harmonic Balancer Puller 


2286D 082171022869 Carded Harmonic Balancer Puller 2.25 lb 1 

228675 082171337420 Bagged Replacement Part: Yoke and Screw Swivel 1.35 lb 1 

228677 082171337444 Bagged Replacement Part: Screw Assortment 1.00 lb 1 

Piston Ring Compressor Set 

■■Set Includes Pliers and 6 Bands, 1119 Through 1124 

■■Install Pistons From 2-7/8 to 4-3/8" (73 to 111mm) 

■■Pliers Can Be Used Parallel or Perpendicular to the Cylinder Block 

■■Fine-Tooth Ratcheting Lock Allows You to Compress Bands in Small Increments 

■■Set Works By Placing a Band Around the Piston, Covering the Rings and Hooking 

Pliers Into the Band and Squeezing 

■■With the Band Tightly Around the Piston, Insert Piston Into Cylinder and Tap Lightly 

With Hammer Handle to Install 


850DD 082171008504 Boxed Piston Ring Compressor Set 2.18 lb 1 


1119D Piston Ring Compressor Band (2-7/8" to 3-1/8") 1123D Piston Ring Compressor Band (3-7/8" to 4-1/8") 



1122D Piston Ring Compressor Band (3-5/8" to 3-7/8") 

16 

Piston Ring Compressor Pliers 

■■Use these Pliers to Install Pistons from 2-5/8 to 5-7/8" (67 to 149mm) in Diameter 

■■Self-Locking Ratchet Allows you to Compress Rings in Small Increments 

■■Pliers can be used Parallel or Perpendicular to the Cylinder Block on Most Bands 


1114D 082171011146 Carded 0.80 lb 1 


1179


■■Use These Bands With 1114 Pliers to Compress Piston Rings 

From 2-7/8 to 4-5/8" in Diameter 

■■Band Width: 1-1/2" 


Piston Ring Compressor Bands 

Product 

Weight 

Shelf 

Pack Qty. 

1119D 082171011191 Bagged Piston Ring Compressor Band (2-7/8" to 3-1/8") 0.20 lb 1 







Piston Ring Compressor 

■■Use Compressor to Install Pistons 2-1/8 to 5" (57 to 127mm) in Diameter 

■■Dependable Friction-type Brake Holds Rings in Compressor 

■■Tool is Beaded Along Lower Edge to Prevent Compressor from Entering the Cylinder 


Product 

Weight 

Shelf 

Pack Qty. 

1720D 082171017209 Carded Piston Ring Compressor, 2-1/8" to 5" (57 to 127mm) 0.45 lb 1 



■■Use Compressor to Install Pistons 3-1/2 to 6-1/2" (89 to 164mm) in Diameter 

■■Positive Lock Action Provides Positive Compression and Fingertip Release 

■■Heavy Spring Steel Compresses the Stiffest Rings Evenly 

■■Tool is Beaded Along Lower Edge to Prevent Compressor From Entering the Cylinder 


1723D 082171017230 Carded 

Piston Ring Compressor, 3-1/2" to 6-1/2" (89 to 

164mm); Trucks and Tractors 

Product 

Weight 

Shelf 

Pack Qty. 

0.80 lb 1 

Diesel Ring Compressor 

■■Use to Install Pistons 3-1/2 to 7" (89 to 177mm) in Diameter on Trucks and Tractors 

■■This 6-1/2" High Positive Lock Compressor Has 4 Tension Bands and Compresses Diesel 

Upper and Lower Rings 

■■Bands are Made of Spring Steel and Beaded Along Lower Edge to Prevent Compressor 

From Entering the Cylinder 


1724 082171017247 Carded Diesel Ring Compressor 1.60 lb 1 

1180


■■Use Compressor to Install Pistons 2-1/8 to 5" (54 to 127mm) in Diameter 

■■Positive Lock Action Provides Positive Compression and Fingertip Release 

■■to Compress Piston Ring Into Grooves, Slip the Tool Over the Piston and 

Tighten With L-Shaped Wrench 

■■Insert Piston Into Cylinder and Tap With a Hammer to Install 

■■Enlarged Crimped Edge Prevents Compressor From Entering the Cylinder 

Heavy Duty Piston Ring Compressor 


2284D 082171022845 Carded 

Heavy Duty Piston Ring Compressor, 

2-1/8 to 5" (54 to 127mm) 

0.65 lb 1 

Piston Ring Groove Cleaner 

■■Effectively Removes Carbon From Ring Grooves on Pistons 2 to 5" (51 to 127mm) 

■■Two 5-Bladed Cutters Cover All Major Piston Ring Grooves in SAE and Metric Sizes 

■■Cutters Rotate to any Selected Size, Locking in Place with Hold-Down Nut 

■■Included Cutter #1: 1/16", 5/64", 3/32", 1/8", 3/16" 

■■Included Cutter #2: 1.5mm, 2.5mm, 3mm, 4mm, 5mm 


1722D 082171017223 Carded Piston Ring Groove Cleaner 0.18 lb 1 

172271 082171337055 Carded Replacement Cutter Blade Kit 0.08 lb 1 

Engine Cylinder Ridge Reamer 

■■Reamer Removes Ridges from Top of Engine Cylinders with Bore Diameters 3 to 5" (77 to 127mm) 

■■Tungsten Carbide Cutters and Fine-Thread Feed-Up Ensure Smooth Cutting Action 

■■Unique Design lets you Change from One Cylinder to Another without Readjusting 


2389D 082171023897 Carded Engine Cylinder Ridge Reamer 2.90 lb 1 

238978 082171337574 Carded Replacement Cutter Blade 0.08 lb 1 

16 

Engine Cylinder Hone 

■■Hone and Remove Glaze From Engine Cylinders From 2" to 7" (51 to 177mm) in Diameter 

■■Adjust Spring Tension for Positive Cutting Action and Set Diameter With Spread Limiter 

■■Hone Includes Medium Grit Stones - Grit No 240 


2833D 082171028335 Carded Engine Cylinder Hone 0.90 lb 1 


1181


■■Stones are for 2833D Engine Cylinder Hone 

4" Replacement Stones 


2834D 082171028342 Carded 4" Replacement Stones (Coarse Grit) - No. 100 0.30 lb 1 

2835D 082171028359 Carded 4" Replacement Stones (Medium Grit) - No. 240 0.25 lb 1 

2836DD 082171028366 Carded 4" Replacement Stones (Fine Grit) - No. 400 0.25 lb 1 

3" Replacement Stones (Medium Grit) 


3157 082171031571 Carded 3" Replacement Stones (Medium Grit) - No. 240 0 lb 1 


Engine Cylinder Flex-Hones 

■■Hone Engine Cylinders 3-1/4 to 4-1/8" (83 to 105mm) in Diameter to 

Produce a Plateaued Finish for Fast Ring Seating and Better Oil Retention 

for Longer Engine Life 

■■Hone Life is in Excess of 1000 Cylinders 

■■Requires No Setup 

■■Use Variable-Speed 3/8" Electric Hand Drill and Move the Flex-Hone® Up 

and Down in the Cylinder Until Desired Results are Obtained 


Product 

Weight 

Shelf 

Pack Qty. 

2486 082171024863 Carded Engine Cylinder Flex-Hones (3-1/2", 89mm); Min Working Diameter (3-1/4", 83mm); 120 Grit 0.75 lb 1 

2487D 082171024870 Carded Engine Cylinder Flex-Hones (3-3/4", 95mm); Min Working Diameter (3-1/2", 89mm); 120 Grit 0.75 lb 1 

2488D 082171024887 Carded Engine Cylinder Flex-Hones (4-1/8", 105mm); Min Working Diameter (3-3/4", 95mm); 120 Grit 0.90 lb 1 

■■Heavy-Duty Hone Engine Cylinders, 2-3/4 to 4-1/2" (70 to 114mm) in Diameter, 

Deliver the Same Plateaued Finish as the Standard-Duty, but are Longer Lasting 

Heavy Duty Engine Cylinder Flex-Hones 


Product 

Weight 

Shelf Pack 

Qty. 

2489D 082171024894 Carded Heavy Duty Engine Cylinder Flex-Hones (3", 76mm); Min Working Diameter (2-3/4", 70mm); 120 Grit 0.75 lb 1 

2490D 082171024900 Carded Heavy Duty Engine Cylinder Flex-Hones (3-1/4", 82mm); Min Working Diameter (3", 76mm); 120 Grit 1 lb 1 

2491 082171024917 Carded Heavy Duty Engine Cylinder Flex-Hones (3-1/2", 89mm); Min Working Diameter (3-1/4", 83mm); 120 Grit 0.90 lb 1 

2492 082171024924 Carded Heavy Duty Engine Cylinder Flex-Hones (4", 101mm); Min Working Diameter (3-1/2", 89mm); 120 Grit 1.25 lb 1 

2493DD 082171024931 Carded Heavy Duty Engine Cylinder Flex-Hones (4-1/2", 114mm); Min Working Diameter (4", 101mm); 120 Grit 1.30 lb 1 

1182


Valve Grinder 

■■Hand Grind Small and Large Flat-Head Unslotted Valves 

■■Textured Handle and Thin Wall Suction Cups Make Grinding Easy 

■■To Use, Place Grinding Compound on Valve Face and Put in Seat 

■■Put Suction Cup on Valve Head and Turn Handle Between Hands 

to Grind 

■■There are 2 Sizes Per Tool 


501D 082171005015 Carded Small Valve Grinder (5/8", 13/16" Diameter) 0.10 lb 1 

505D 082171005053 Carded Standard Valve Grinder (1-1/8", 1-3/8" Diameter) 0.15 lb 1 

Valve Spring Compressor 

■■Compress Valve Springs on Overhead Valve and L-head Engines on Cars, Trucks and Tractors 

■■Tool has a 9-3/4" Throat Depth and Jaw Openings 2-3/4 to 7-3/4" fits larger engine sizes 

■■Jaws and Plunger Bar are easily Adjusted 

■■Plunger Bar Seats on Both Flat- and Cup-Shaped Valve Heads 

■■Offset and Straight Jaws are Included 


380 082171003806 Boxed Valve Spring Compressor 7.80 lb 1 

Small Engine Valve Spring Compressor 

■■Long and Slender, Will Reach Into Small Recesses Where Valve Springs and 

Retaining Washers are Located 

■■Arms are Hinged at One End So They are Practically Parallel at the Other End at 

All Points 

■■Jaws are Adjustable in Width and Have Edges So Thin That They Can Be Forced 

Under and Over Ends of Valve Spring to Compress It for Removal 

■■Operating Screw Makes Ratchets and Locks Unnecessary 

■■Will Work on All Briggs and Stratton Engines 

■■Maximum Opening 2-3/8" 


379D 082171003790 Carded Small Engine Valve Spring Compressor 1.40 lb 1 


■■Remove and Replace Valve Springs in GM 8-cylinder Engines 

■■Heavy-duty Tool Replaces Weak or Broken Valve Springs and Guide Seals with Cylinder 

Head on the Engine 

■■Compressor is Used by Removing Rocker and Fastening Tool to Stud with Nut 

■■Pull on the Handle to Compress Spring 

■■Use with 901DD or 2992D Air Hold Fittings to Keep Valve Closed 

■■Length: 12-1/2" 

■■Caution: Vehicle must be Placed in Park/Neutral before Applying Air Pressure, otherwise 

Vehicle may move. Keep hands clear of Fan, Belts and Pulleys since slight Crankshaft 

Rotation will Occur 

16 



912DD 082171009129 Carded Valve Spring Compressor 1.16 lb 1 

1183


■■Compressor Services Overhead Valve Engines 

■■Handle on the Outside of the Tool Makes it Easy to Use. It has a 

Throat Depth of 7-1/2" and Jaw Openings 2-3/4 to 5-7/8" 

■■Compressor fits most Passenger Cars and Light Trucks and will 

also work on Small L-head Engines with Manifolds Removed 

■■38370D Offset Jaws are Included 



Product 

Weight 

Shelf 

Pack Qty. 

383D 082171003837 Carded Valve Spring Compressor 4.65 lb 1 

38370D 082171383700 Bagged Replacement Part: Jaw Set (Newer Style) 0.53 lb 1 


■■Compress Valves on Small Overhead Valve or L-head Engines 

■■Tool has a Throat Depth of 6-1/4" and Jaw Openings of 3 to 5-3/8" 

■■Designed for Liight-weight Valve Springs 

■■Compressor Works on L-heads with Manifolds Removed and many 

Industrial Engines 


Product 

Weight 

Shelf 

Pack Qty. 

385D 082171003851 Carded Valve Spring Compressor 2.55 lb 1 

38570D 082171385704 Bagged Replacement Part: Jaw Set (New Style) 0.65 lb 1 


Deluxe Universal Overhead Valve Spring Compressor 

■■Compressor Easily Removes Valve Springs on Most Cars and Light Trucks 

■■Tool Can Be Used With the Cylinder Head on or Off the Engine 

■■Features a Removable Handle Allowing Use With 5/8" Socket or Wrench in Confined Areas 

and an Extra-Long Leg for More Applications 

■■For Best Results, Use With 901DD or 2992D Air Hold Fittings to Pressurize the Cylinder and 

Keep the Valves in Place During Removal of the Spring and Keepers 

■■Caution: Vehicle Must Be Placed in Park/Neutral Before Applying Air Pressure, Otherwise 

Vehicle May Move 

■■Keep Hands Clear of Fan, Belts and Pulleys Since Slight Crankshaft Rotation Will Occur 


3271DD 082171032714 Carded Deluxe Universal Overhead Valve Spring Compressor 0.95 lb 1 

327175D 082171318344 Bagged Replacement Long Leg, Length 3-15/32" 0.28 lb 1 

327176 082171318351 Bagged Replacement Short Leg, Length 3-5/32" 0.25 lb 1 

Universal Overhead Valve Spring Compressor 

■■Remove Valve Springs on Most Cars With Overhead Valves Without Removing the Cylinder Head 

■■Offset Jaws Grip the Valve Spring in Parallel Compression 

■■Tool Maintains Constant Length As Spring is Compressed 

■■Use With 901DD or 2992D Air Hold Fittings to Keep Valve in Place 

■■Caution: Vehicle Must Be Placed in Park/Neutral Before Applying Air Pressure, Otherwise Vehicle 

May Move 

■■Keep Hands Clear of Fan, Belts and Pulleys Since Slight Crankshaft Rotation Will Occur 


2078D 082171020780 Carded Universal Overhead Valve Spring Compressor 0.95 lb 1 

1184


Exhaust and Talpipe Cutter 

■■Cut Pipes 3/4" to 3" (19 to 76mm) in Diameter 

■■Fifteen Blades Effectively Cut Pipe so only 1/4 Turn is needed for a Complete Cut 

■■Patented, Serviceable Tool Works in Hard-to-Reach Areas 

■■Will not cut Double-Wall Pipes 

■■Keep Well Oiled 

■■Not for use on Stainless Steel 


2031DD 082171020315 Carded Exhaust and Tailpipe Cutter 1.16 lb 1 

203182D 082171231766 Boxed Replacement Cutting Chain 0.32 lb 1 

■■Flare, Shape and Expand Tailpipes to Ensure a Tight Fit and 

Prevent Exhaust Leaks 

■■Turn Handle to Adjust the Expander to the Diameter of the Pipe 

■■Pipe Size 1-1/2" to 2-1/2" (38mm to 63.5mm) 

Exhaust and Tailpipe Expander (1-13/16" to 2-1/2") 


2071D 082171020711 Carded Exhaust and Tailpipe Expander (1-13/16" to 2-1/2") 2.65 lb 1 

Exhaust Pipe Expander (1-13/16" to 2-1/2") 

■■Used to Remove Clamp Grooves and Round Out Crushed or Bent Exhaust Pipes to Ensure a 

Tight Fit, Eliminating Exhaust Leaks 

■■Hex End Allows for the Use of a Combination Wrench to Remove Clamp Grooves or Small 

Imperfections or an Impact Wrench to Expand Pipes 

■■Imperfections are Forced Outward Rather Than Forward, Eliminating Possible Damage to 

Component Parts 

■■No Holding Fixture is Necessary 

■■Pipe Size 1-13/16" to 2-1/2" (46 to 63.5mm) 

16 


3442 082171034428 Carded Exhaust Pipe Expander (1-13/16" to 2-1/2") 2.90 lb 1 

4 Pc. Scraper Set 

■■Includes 4 Flat Scrapers 

■■Innovative Dual Material handle for Comfort and Performance 



84080 099575840807 Carded Scraper Set 2.11 lb 1 


84081 1/4" Wide Scraper 84082 1/2" Wide Scraper 84083 1" Wide Scraper Long 84084 1" Wide Scraper Short 


1185


2 Pc. Scraper Set 

■■Innovative Dual Material handle for Comfort and Performance 



84070 099575840708 Carded Scraper Set 1.15 lb 1 


84071 1" Wide Reverse Scraper 84072 1" Wide Offset Scraper 

1" Crimped Wire-End Brush 

■■Brush Removes Dirt, Rust and Paint From Metal and Other Surfaces 

■■Designed for General-Purpose Cleaning with 0.020" Industrial Crimped Wire 

■■Use in Electrical Drills, Pneumatic Tools or Flexible Shaft Equipment 

■■Face Diameter: 1" 

■■Shank Diameter: 1/4" 

■■Maximum Safe Free Speed: 20,000 Rpm 


2313D 082171023132 Carded 0.65 lb 


1" Knot-type Wire-End Brush 

■■Brush Removes Rust, Carbon and Paint From Metal and Other Surfaces 

■■Designed for Heavy-Duty Use and Consists of Industrial Tempered Straight Twisted Wire 0.020" 

■■Use with Electric Drills, Pneumatic Tools or Flexible Shaft Equipment 

■■Face Diameter: 1" 

■■Shank Diameter: 1/4" 

■■Maximum Safe Free Speed: 20,000 RPM 


2312DD 082171023125 Carded 0.45 lb 

2-1/2" Wire Cup Brush 

■■Brush Removes Light Scale, Rust and Paint From Surfaces 

■■Designed for Light-Duty Use With 0.014" High Carbon Steel Wire 

■■Use in Electric Drills or Flexible Shaft Equipment 


2314D 082171023149 Carded 0.86 lb 

■■Clean Carbon, Dirt and Paint from Metal and other Surfaces with this 

Wooden-Handle Brush 

■■Overall Length: Approximately 14" 

■■Bristle Area: 3 X 19 Rows, 1-1/8" Trim and 6" Long 

Curved Handle Wire Scratch Brush 


2310D 082171023101 Carded 0.35 lb 

1186


■■Use This Hardwood-Handle Brush to Clean Dirt, Carbon and 

Rust From Metal and Other Surfaces 

■■Bristles are Densely Packed Over 5-1/4" 

■■Overall Length: Approximately 10" 

■■Bristle Area: 4 X 16 Rows and 1-1/8" Trim 


2311D 082171023118 Carded 0.35 lb 

Shoe Handle Wire Scratch Brush 

Parts Cleaning Brush 

■■Brush Removes Grease and Dirt From Automotive Parts 

■■Strong Handle with Durable Polypropylene Bristles will Hold Up Under 

Repeated use in Cleaning Solvents 


242 082171002427 Carded 0.20 lb 1 

Stainless Steel Brush 

■■Brush Has Hand-Tied Stainless Steel Tufts for Cleaning Corrosion from 

Parts without Scratching 

■■Brush Size: 3/8" X 1-3/8" 

■■Handle Length: 7" 


2309D 082171023095 Carded 0.05 lb 1 

16 


1187

B A T T E R Y , I G N I T I O N , E L E C T R I C A L 

5/16" Side Terminal Battery Wrench 


3367 082171033674 Carded Side Terminal Battery Wrench 0.33 lb 1 

■■Use Puller to Remove the Battery Terminal Clamp Without 

Damaging the Battery Post 

■■Puller Will Even Work on Corroded Spring-Type Clamps 

■■To Use, Loosen the Clamp Bolt, Place Jaws Under Each Side of 

the Battery Cable Clamp and Tighten the Center Screw Until the 

Clamp is Free 

Battery Terminal Puller 


202D 082171002021 Carded Battery Terminal Puller 0.50 lb 1 


■■Clean and Spread Battery Cable Terminals With This Plier-Type 

Tool 

■■Sharp Teeth Effectively Clean Corrosion From the Clamp 

■■Squeeze the Handle to Spread the Clamp 

Battery Terminal Spreader and Cleaner 


204D 082171002045 Carded Battery Terminal Spreader and Cleaner 0.60 lb 1 

■■Loosen and Tighten Nuts on Battery Terminal Clamps 

■■Offset Handles for Working in Cramped Areas 

■■Serrated Jaws Provide Firm Grip 

Battery Nut Pliers 


203D 082171002038 Carded 0.45 lb 1 

1188


Three-Way Battery Tool 

■■Sharp Steel Blades on This Tool Remove Corrosion and Put a 

Correct Angle on Terminal Clamps and Posts 

■■Use the 6-Blade, Tapered Reamer to Quickly Clean Terminal 

Clamps 

■■Post Cleaners are Marked Positive and Negative, and are Sized 

to Accurately Fit Terminal Posts and Cut the Correct Angle 

■■Proper Cleaning of Terminals and Posts Ensures Perfect Contact 


2173DD 082171021732 Carded Three-Way Battery Tool 0.15 lb 1 

Metal Battery Brush 

■■Durable Metal Brush to Remove Corrosion and Dirt from Battery 

Terminals and Cable Clamps 

■■Rugged Metal Case has a Long Life 


206D 082171002069 Carded Battery Brush 0.25 lb 1 

■■Removes Corrosion and Dirt from Battery Terminals and Cable 

Clamps 

■■High-impact, Plastic Case will not Corrode or Soften Brush in 

Cleaning Solutions 

Plastic Battery Brush 

16 


201D 082171002014 Carded Battery Brush 0.16 lb 1 

■■Carry Top-Terminal and Side-Terminal Batteries with this Strong, 

Plastic Strap 

■■Ends are Marked and Sized to Accurately Fit Positive and 

Negative Terminals 

■■Not Harmed by Battery Acid 

■■Can Also Be Used as a Charging Adapter on Side-Mounted 

Terminal Batteries 

■■Length: 14" 

Battery Carrying Strap, Top and Side Mount 



2279DD 082171022791 Carded Battery Carrying Strap 0.46 lb 1 

1189


■■Carry Top-Terminal Batteries with this Strong, Plastic Strap 

■■Ends are Marked and Sized to Accurately Fit Positive and 

Negative Terminals 

■■Not Harmed by Battery Acid 


Battery Carrying Strap, Top Mount 


205D 082171002052 Carded Battery Carrying Strap 0.25 lb 1 

■■Test for Voltage in 6 and 12V Systems by Grounding the Clip and 

Touching the Probe to the Point being Tested 

■■Tester Bulb will Light if Power is Present 

■■Replacement Bulb Part: 12675 (GE 1449 Bulb) 



129D 082171001291 Carded Low-Voltage Circuit Tester 0.43 lb 1 


■■Test for Voltage in 6 and 12V Systems for Voltage and Spark 

Plugs for Spark by Grounding the Clip and Touching the Probe to 

the Point being Tested 

■■Tester Bulb will Light if Power is Present 

■■To Use as a Spark Tester, Screw the Probe to the Opposite End 

of the Handle 

High-Low Voltage Tester 


126D 082171001260 Carded High-Low Voltage Tester 0.20 lb 1 

12678 082171126789 Bagged Replacement Part: Neon Bulb 0.01 lb 1 

12675 082171126758 Bagged Replacement part: GE 1449 Bulb 0.01 lb 1 

■■Circuit Tester for 6 and 12V Electrical Systems is Ideal for the 

Home Mechanic 

■■Quickly Checks Headlight, Taillight and Turn Signal Circuits, 

Faulty Sockets, Connections, Fuses and Broken Wires 

■■Comes in a Tough, Durable Shock-Resistant Case 

■■Includes 12V Bulb and 36" Cable 

■■Replacement Bulb: 1893 



2646D 082171026461 Carded Low-Voltage Circuit Tester 0.15 lb 1 

1190


■■Includes 36” Cable. One Aar Battery Required (Not Included). 

Uses Bulb #112 Screw-In Design 

■■Designed for the Home Mechanic, This Tool Safely Tests Circuits 

With Power Off 

■■Ideal for Testing Fuses, Grounds, Shorts, Contacts, Diodes and 

Open Circuits 

Circuit Continuity Tester 


2647D 082171026478 Carded Circuit Continuity Tester 1.12 lb 1 

■■Includes 36” Cable. Uses Bulb #1893 

■■Checks 6 and 12V Circuits for Voltage and Checks Spark Plug 

for Spark 

■■Place Probe in End With Regular Bulb to Check Low Voltage 

■■Checks Headlights, Taillights, Turn Signals and Other Circuits 

■■Tests for Faulty Sockets, Connections and Broken Wires 

■■Place Probe in End With Neon Bulb to Check for Spark Voltage 

■■Tester Comes in a Shock-Proof Case 

Circuit and Spark Plug Tester 


2649D 082171026492 Carded Circuit and Spark Plug Tester 0.15 lb 1 

6, 12, 24 Volt Circuit Tester 

16 


3984 082171039843 Carded 6, 12, 24 Volt Circuit Tester 0.59 lb 1 

398401D 082171398414 Bagged Replacement Bulb (GE 1889) 0.08 lb 1 

HEI Ignition Tester 

■■Accurately Check for Spark in Ignition Systems Without 

Removing Spark Plug From Engine 

■■Testers Verify That Energy is Sufficient for Spark Plug to Fire 

■■Attach Spark Plug Wire to Tester End 

■■Clamp Tester to Engine As Ground 

■■Crank Engine and Check for Spark 



2756D 082171027567 Carded HEI Ignition Tester 0.15 lb 1 

1191


■■Accurately Check for Spark in Ignition Systems Without 

Removing Spark Plug From Engine 

■■Testers Verify That Energy is Sufficient for Spark Plug to Fire 

■■Attach Spark Plug Wire to Tester End 

■■Clamp Tester to Engine As Ground 

■■Crank Engine and Check for Spark 

Standard Ignition Tester 


2757D 082171027574 Carded Standard Ignition Tester 0.15 lb 1 

■■Locates Short Circuits in 6 and 12V Systems Right Through 

Upholstery, Body Panels and Metal Door Posts 

■■Connect Tester Across Burned Out Fuse 

■■Move Meter Along Wire Routing 

■■Meter Needle Will Oscillate Until Short is Found 

Short Circuit Detector 


2524D 082171025242 Carded Short Circuit Detector 0.35 lb 1 


Current Indicator 

■■Measures Alternator and Starter Dc Current in 6, 12 and 24V 

Systems 

■■Indicates Direction of Current Flow Without Breaking Into Lines 

■■Starter Current Scale: 600-0-600 

■■Alternator Current Scale: 75-0-75 

■■Place Meter on Wire 

■■Crank Engine to Check Starter Current 

■■Run Engine to Check Alternator Current 


2423D 082171024238 Carded Current Indicator 0.10 lb 1 

Distributor Clamp Wrench 


104 082171001048 Carded Distributor Clamp Wrench 0.60 lb 1 

10473 082171104732 Bagged Replacement Part: Coupler for Distributor Clamp Wrench 0.05 lb 1 

1192


Ignition File 

■■Use Tool to File Ignition Points and Other Small Objects 

■■The Thin Blade Has a Fine Grid on Both Sides and is Ideal for 

Removing Carbon From Points 


2153D 082171021534 Carded Ignition File 0.03 lb 1 

■■All-Purpose Tool Includes Pliers Type Nose, Crimper, Wire 

Cutter, Stripper and Bolt Cutter 

■■Crimper Works on Insulated and Non-insulated Terminals. Noninsulated 

Auto 7 & 8mm, and Electrical 22-20 to 22-10. Insulated 

Electrical 22-20 to 12-10. 

■■Bolt Cutters for Bolt Sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 

10-24 



2162D 082171021626 Carded 0.50 lb 1 

■■Safely Remove Spark Plug Cables and Prevent Cable Damage 

Spark Plug Terminal Pliers 

16 


135D 082171001352 Carded 0.53 lb 1 

14mm and 18mm Spark Plug Open Thread Chaser 

■■Clean and Restore Spark Plug Threads with a 13/16" Socket 

■■Rubber Ring Eliminates Slipping 

■■Tool Services Most Cars 


730D 082171007309 Carded 14mm and 18mm Spark Plug Open. Thread Chaser 0.30 lb 1 


1193


■■Repair Damaged 14mm Spark Plug Threads By Opening Hole 

With a Reamer/Tap and Screwing Insert Onto the Spark Plug 

■■Use Spark Plug Socket to Install Spark Plug and Insert 

■■Remove Plug and Check That Insert is Properly Seated 

■■Set Includes 1 Each of 4 Inserts: 3/8, 7/16, 1/2 and 3/4" Reach 

and Thread Locking Compound 

■■Tap is Designed for Aluminum Heads Only 

14mm Cylinder Head Rethreader Kit 


2125D 082171021251 Carded 14mm Cylinder Head Rethreader Kit 0.30 lb 1 

■■Use to Replace Damaged 14mm Spark Plug Threads on 

Aluminum Head Engines Only 

■■Use With 2123D Reamer/Tap to Repair Holes 

■■Thread Locking Compound and 1 Pair of Inserts are Included 

■■Inserts are Designed for Use in Holes Reworked With Reamer/ 

Tap Listed 

14mm Spark Plug Thread Inserts 



2126D 082171021268 Carded 3/8" Spark Plug Thread Inserts 0.05 lb 1 



2129DD 082171021299 Carded 3/4" Spark Plug Thread Inserts 0.05 lb 1 

■■Tool Features Extra-Long Neck for Access to Recessed Spark 

Plug Cavities 

■■Groove and O-Ring Holds Tool in Socket 

■■Use With 3/8" Square Drive Tool or a 5/8" Socket 

14mm Spark Plug Rethreader 


3379D 082171033797 Carded 14mm Spark Plug Rethreader 0.10 lb 1 

■■Opens Damaged Spark Plug Hole Threads Prior to Using Spark 

Plug Thread Inserts 

■■Use Inserts 2126D Through 2129DD to Repair 14mm Spark Plug 

Holes on Aluminum Heads Only 

14mm Spark Plug Insert Reamer/Tap 


2123D 082171021237 Carded 14mm Spark Plug Insert Reamer/Tap 0.20 lb 1 

1194


■■Contains Long Reach Magnetic Swivel Spark Plug Sockets 

■■Covers Sizes 5/8",13/16", and 9/16" 

3 Pc. Magnetic Spark Plug Set 


41730D 082171417306 Boxed 3 Pc. Magnetic Spark Plug Set 1.67 lb 1 


3931D 9/16" Spark Plug Socket - Magnetic 2.5" Length 3930D 13/16" Swivel Spark Plug Socket - Magnetic 6" Length 


■■Long Reach 5/8" Magnetic Swivel Spark Plug Socket Set 

■■Lengths of 4", 6", and 11" 

3 Pc. Magnetic Swivel Spark Plug Set 

16 


41740D 082171417405 Boxed 3 Pc. Magnetic Swivel Spark Plug Set 1.96 lb 1 


3927D 5/8" Swivel Spark Plug Socket - Magnetic Plug 4" Length 3929D 5/8" Swivel Spark Plug Socket - Magnetic 11" Length 


■■Magnetic Swivel Design for Easy Installation or Removal of Spark 

Plugs 

Magnetic Swivel Spark Plug Sockets 

Cat. No. UPC No. Packaging Fastener Size Overall Length Product Weight Shelf Pack Qty. 

3931D 082171393105 Carded 9/16 in 2-1/2 in 0.10 lb 1 

3938D 082171039386 Carded 9/16 in 6 in 0.30 lb 1 






1195

B O D Y T O O L S 

7 Pc. Hook & Pick Set 




84001D 5" Cotter Pin Puller 84005 3-1/8" 90° Mini Hook 

84002D 4" Hose Pick Puller 84006 3-1/8" Straight Mini Hook 

84003D 4-1/2" Awl 84007 3-1/8" Mini Offset Hook 

84004D 3-1/8" Mini Full Hook 

4 Pc. Mini Hook & Pick Set 



84040 099575840401 Retail Packaging 0.44 lb 1 


84004D 3-1/8" Mini Full Hook 84006 3-1/8" Straight Mini Hook 

84005 3-1/8" 90° Mini Hook 84007 3-1/8" Mini Offset Hook 

4" Hose Pick Puller 


84002D 099575840029 Carded 4" Hose Pick Puller 0.22 lb 1 

1196


4-1/2" Awl 


84003D 099575840036 Carded 4-1/2" Awl 0.20 lb 1 



84001D 099575840012 Carded 5" Cotter Pin Puller 0.26 lb 1 

3-1/8" Mini Full Hook 


84004D 099575840043 Carded 3-1/8" Mini Full Hook 0.16 lb 1 

3-1/8" 90° Mini Hook 

16 


84005 099575840050 Carded 3-1/8" 90° Mini Hook 0.07 lb 1 

3-1/8" Straight Mini Hook 


84006 099575840067 Carded 3-1/8" Straight Mini Hook 0.07 lb 1 


1197


3-1/8" Mini Offset Hook 


84007 099575840074 Carded 3-1/8" Mini Offset Hook 0.16 lb 1 

4 Pc. Door Panel Remover Set 


84060 099575840609 Carded Set includes tools to help remove door panels with minimal damage 2.34 lb 1 


84051 4" V-Notch Puller 84053 4" Scraper 

84052 4" Square Notch Puller 84054D 4" Curved Blade V-Notch Puller 


4 Pc. Door Pad and Panel Removal Set 


84050 099575840500 Carded 2.10 lb 1 


84051 4" V-Notch Puller 84053 4" Scraper 

84052 4" Square Notch Puller 84054D 4" Curved Blade V-Notch Puller 

1198


10" Door Panel Remover U Shape 


84062 099575840623 Carded 10" Door Panel Remover - U 0.42 lb 1 

4" Curved Blade V-Notch Puller 


84054D 099575840548 Carded 4" Curved Blade V-Notch Puller 0.43 lb 1 

4" Square Notch Puller 

16 


84052 099575840524 Carded 4" Square Notch Puller 0.53 lb 1 

4" V-Notch Puller 


84051 099575840517 Carded 4" V-Notch Puller 0.20 lb 1 


1199


3 Pc. Body Clip Set 

■■30° and 80° Offset Push Pin Pliers 

■■Panel Clip Pliers with "V" Design for Removal of Standard Clips 

without Center Pins 


41850 082171418501 Carded 3pc Body Clip Set 1 lb 1 


3705 Panel Clip Pliers 3888D Push Pin Pliers - 80° 

3729 Push Pin Removal Pliers - 30° 

■■30° and 80° Offset Push Pin Pliers 

2 Pc. Push Pin Pliers Set 



41840D 082171418402 Carded 0.90 lb 1 


3729 Push Pin Removal Pliers - 30° 3888D Push Pin Pliers - 80° 

■■Specially Designed for Removal of Push Pins With Center 

Locking Pin 

■■Quickly Removes Plastic Anchors That Have Center Pins Without 

Damage to Pins or Anchor 

■■Tool Lifts the Center Pin and Pulls Anchor in One Simple Step 

■■Anchors Common on Honda, Toyota, GM, Ford, Chrysler and 

Many Other Late Model Vehicles 

■■Fits Into Pin Slots and Under the Center Pin 

■■Double Cushion Grip Handle 

■■Tapered End for Easy Access 

■■30° Offset 

Push Pin Removal Pliers - 30° Offset 


3729 082171037290 Carded 0.45 lb 1 

1200


Push Pin Pliers - 80° 

■■Specially Designed for Removal of Push Pins With Center 

Locking Pin 

■■Quickly Removes Plastic Anchors That Have Center Pins Without 

Damage to Pins or Anchor 

■■Tool Lifts the Center Pin and Pulls Anchor in One Simple Step 

■■Anchors Common on Honda, Toyota, GM, Ford, Chrysler and 

Many Other Late Model Vehicles 

■■Fits Into Pin Slots and Under the Center Pin 

■■Double Cushion Grip Handle 

■■Tapered End for Easy Access and 80° Offset 


3888D 082171388804 Carded 0.45 lb 1 

Panel Clip Pliers 

■ ■ Features a Unique Two-Step Tip That Provides Better Support 

Under the Clip Head Than Conventional Panel Clip Pliers 

■■Added Support Provided by the Two-Step Design Allows 

Removal of Panel Clips Without Damaging the Clip 


3705 082171037054 Carded 0.57 lb 1 

■■Used for Upholstery Work on Most All Domestic and Foreign 

Cars 

■■45 Degree Hog Ring Plier 

■■Straight Hog Ring Plier 

■■For Installation of "Hog Ring" Fasteners 

■■Specially Made to Grip and Mold Hog Rings for Closure 

■■Spring Loaded to Hold Hog Ring in Jaws During Use 

■■Cushion Grip Handle 

2 Pc. Hog Ring Pliers Set 


3702D 082171037023 Carded 1.50 lb 1 


3703D Hog Ring Pliers Straight 3704D Hog Ring Pliers 45 Degree 

16 


1201





Hog Ring Pliers Straight 


3703D 082171037030 Carded 0.75 lb 1 

■■Used for Upholstery Work on Most All Domestic and Foreign 

Cars 

■■45 Degree for Added Access 




Hog Ring Pliers 45 Degree 


3704D 082171037047 Carded 0.75 lb 1 

■■Tool Reaches Behind Trim Panel on GM and Other Cars 

■■Grips Plastic Fastener and Removes Trim Without Damage 

Trim Pad Removing Tool 



2822D 082171028229 Carded Trim Pad Removing Tool 0.22 lb 1 

■■Compresses the Door Handle Spring Clip Far Enough so that the 

Handle can be Removed while the Spring Clip Remains on the 

Handle 

■■Use Tool's Reverse End to Disengage Clip Holding Door 

Upholstery Panels 

■■Fits GM, Ford and Other Cars Using Type of Clip Shown 

Door Handle and Window Lift Remover 


431D 082171004315 Carded Door Handle and Window Lift Remover 0.32 lb 1 

1202


■■Removes Clips and Spreads Rubber Gasket on Chrysler 

Windows 

■■Rounded Point Spreads Zipper-Type Gaskets 

Window Moulding Remover 


2037DD 082171020377 Carded Window Molding Remover 0.18 lb 1 

■■Removes Window Molding Clips on GM, Ford Vehicles 

■■Place Jaw Flat Against Glass 

■■Locate Clips and Roll Them Out With Tip, Keeping Jaw Flat to 

Glass 

Window Moulding Remover 


2038D 082171020384 Carded Window Molding Remover 0.21 lb 1 

Body Dent Remover 

■■Pulls Dented Sheet Metal Back Into Place 

■■To Use, Drill a Hole in the Deepest Part of the Dent, Insert the 

Hook or Self-Threading Screw Tip and Tap Lightly With the 2 Lb 

Slide Hammer to Remove the Dent 

■■16.5" Long Shaft (Including Handle) Enables High Pulling Force 

■■Slide Hammer Shaft Has a 1/2-20 UNC Thread 

■■Handle Length: 4.75" 


2290D 082171022906 Carded Body Dent Remover 3.58 lb 1 

229070 82171337451 Bagged Replacement Part: Hook and Screw Package 0.10 lb 1 

229076 82171337437 Bagged Replacement Part: Nose Nut 0.06 lb 1 

Deluxe 6" Dent Puller 

■■Puller Easily Pops Dented Hoods, Doors and Fenders Into Place 

■■6" Diameter Suction Disc With Steel Handle and Steel Support 

Plates Enables Strong Pull 

■■Works on Nearly Every Dent Where the Sheet Metal Has Not 

Been Creased 

■■Lift Edge to Release Suction 

■■Puller Also Functions as a Glass Holder 

16 



2761D 082171027611 Carded Deluxe 6" Dent Puller 0.52 lb 1 

1203


■■Includes the Tools Needed to Remove the Radio From the Dash 

on Many Domestic and Import Vehicles Without Damage to the 

Radio or the Dash Panel 

■■Antenna Nut Sockets Fit Over Antennas and Down Into Deep 

Well Locations 

■■Set Includes: Radio Removal Tool, Key Set, Antenna Nut Socket 

Set 

Radio Removal & Antenna Wrench Set 


41680D 082171416804 Carded Radio Removal & Antenna Wrench Set 2.06 lb 1 

Mini Scraper 

■■Use for Light Scraping on Wood, Metal and Glass 

■■Small Size Allows for Scraping in Confined Areas 

■■Scraper Includes Plastic Sleeve Handle for Comfort 

■■Comes in Convenient Standard Pack of 30 in Countertop 

Merchandiser 

■■Orders Must Be Placed in Multiples of 30 



3390 082171033902 Carded Mini Scraper 0.10 lb 30 

■■Remove Inspection Stickers, Dealer Price Labels and Paint From 

Glass 

■■Tool Locks Into 3 Operating Positions to Reach Hard-To-Get-At 

Slanting Windshields and Uses Single-Edge Razor Blades 

■■Cutting Edge Folds Into the Handle for Safe Storage 

All-Purpose Scraper and Sticker Remover 


2106 082171021060 Carded All-Purpose Scraper and Sticker Remover 0.29 lb 1 

Long Reach Scraper 

■■7" Long Reach Scraper is Ideal for Use Where Added Extension 

is Needed, Such As Deep Recessed Dash Boards in Mini-Vans 

■■Contains Two Replacement Blades, Including One Plastic Blade 

Which Will Not Harm Coated Windows 

■■Replacement Plastic Blade Available 


3528D 082171035289 Carded Extended Long Reach Scraper 0.53 lb 1 

352870 82171990151 Carded Replacement Plastic Blade 0.02 lb 1 

1204

B R A K E A N D W H E E L 

■■Kit Works on both Disc and Drum Brake Systems 

■■Use to Adjust Clearance Between Drum Brakes And Shoe, 

Remove and Install Shoe Return Springs and Brake Pads 

■■Heavy Duty Brake Spreader - Use with Both a 5/16" Socket 

Wrench or Use By Hand 

■■Brake Lining Thickness Gauge - Color Coded Brake Gauge 

Identifies Thickness Levels for Brake Lining Inspection 

16 Pc. Brake Service Set 


41520 082171041525 Boxed 16 Pc. Brake Service Set 5.98 lb 1 


287D Drum Brake Adjusting Tool 80421 3/8" Drive Hex Bit Socket, 3/8" 

298D Brake Spring Pliers 80428D 3/8" Drive Hex Bit Socket, 7mm 

2774D Universal Brake Shoe Retaining Spring Tool 80429 3/8" Drive Hex Bit Socket, 8mm 

3163D Disc Brake Piston Tool 80431 3/8" Drive Hex Bit Socket, 10mm 

3355D GM-Ford Disc Brake Piston Tool 80451 3/8" Drive TORX® Press-Fit Bit Socket, T-40 

3525D Heavy Duty Brake Pad Separator 80452 3/8" Drive TORX® Press-Fit Bit Socket, T-45 

3962 Brake Lining Thickness 80454 3/8" Drive TORX® Press-Fit Bit Socket, T-50 


■■Designed for Vehicles With Brake Pistons That are Mechanically 

Tied to the Parking Brake and Require a Turning Action to Push 

Back 

■■Set Covers Most Domestic and Import Vehicles 

11 Pc. Rear Brake Caliper Set 


41540 082171041549 Boxed 11 Pc. Rear Brake Caliper Set 5.14 lb 1 


41541 Applicator & Pad for Brake Tool 41546D Adapter 5: 1-3/8", 2 Pin, 3/8" Drive 

41542 Adapter O: 2-1/2", 1 Pin 41547 Adapter 6: 1-5/8", 2 Pin(L) 

41543 Adapter 2: 2", 3 Pin 41548D Adapter 7: 1-5/8", 2 Pin(S) 

41544 Adapter 3: 2-1/4", 3 Step 41549D Adapter 8: 1-7/8", 1 Pin 

41545 Adapter 4: 1-1/4", 2 Pin 41550D Adapter P: 2-1/4", 1 Pin 

16 


1205


Brake Spring Pliers 

■■Tool Easily Removes and Installs Shoe Return Springs on Most 

Drum Brakes 

■■Socket End Removes Spring From Anchor Stud and Notched 

End Installs Spring on Anchor 

■■Tool is Chrome Plated to Resist Rust and Provides Easy Cleanup 


298D 082171002984 Carded 0.90 lb 1 

■■Tool Removes and Installs Return Spring on Bendix Drum Brakes 

■■To Use, Place Socket End Over Spring Anchor and Twist to 

Remove 

■■Hook Notched End Through Spring and Over the Post, Then Lift 

to Install 

Bendix Drum Brake Spring Tool 


280 082171002809 Carded Bendix Drum Brake Spring Tool 0.35 lb 1 


■■Tool Removes and Installs Retaining Springs 11/16 to 7/8" in 

Diameter 

■■Special Socket Grips Retaining Washer 

■■Push and Turn to Remove or Install 

■■Tool Adjusts Clearance Between Drum Brake and Brake Shoe 

■■Fits Through a Slot in the Backing Plate and Turns the Star 

Wheel 

■■Ends of Tool are Offset for Hard-To Reach Areas on Small Cars 

Brake Shoe Retaining Spring Tool 


285D 082171002854 Carded Brake Shoe Retaining Spring Tool 0.25 lb 1 

Drum Brake Adjusting Tool 


295D 082171002953 Carded Drum Brake Adjusting Tool 0.25 lb 1 

1206


■■Tool Adjusts Clearance Between Drum Brake and Brake Shoe 

■■Fits Through a Slot in the Backing Plate and Turns the Star 

Wheel 

Drum Brake Adjusting Tool 


287D 082171002878 Carded Drum Brake Adjusting Tool 0.25 lb 1 

■■Double-Ended Tool Removes and Installs Small and Large Car 

Drum Brake Retaining Springs 

■■Tool Fits Sizes 5/8 to 11/16" and 11/16 to 7/8" Diameter Special 

Sockets Grip Retaining Washers 

■■Push and Turn to Remove or Install 

Universal Brake Shoe Retaining Spring Tool 


2774D 082171027741 Carded Universal Brake Shoe Retaining Spring Tool 0.30 lb 1 

Disc Brake Piston Tool 

■■Designed to Rotate the Parking-Brake-Activated Piston Back 

into the Caliper Cylinder When Replacing Worn Pads on Vehicles 

Equipped With 4-Wheel Disc Brakes 

■■Tool Will Function on Most Domestic and Import Vehicles 

■■Caution: Do Not Use With Power Tools 

16 


3163D 082171031632 Carded Disc Brake Piston Tool 0.20 lb 1 

■■Tool Rotates the Piston Back on GM and Ford Vehicles Equipped 

With Rear Wheel Disc Brakes 

■■Fits GM Vehicles with 2-1/8 and 1-7/8" Pistons and Ford Vehicles 

1987 to Current With Rear Disc Brakes 

■■Use in Conjunction With 3/8" Square Drive Tool 

■■Caution: for Intended Use Only 

■■Pushes the Caliper Piston Back on Disc Brakes that do not have 

the Parking Brake Mechanism as Part of the Disc Brake Caliper 


GM-Ford Disc Brake Piston Tool 


3355D 082171033551 Carded GM-Ford Disc Brake Piston Tool 0.20 lb 1 

Disc Brake Pad Spreader 



3376D 082171033766 Carded Disc Brake Pad Spreader 0.44 lb 1 

1207


■■Tool Helps to Move Front Disc Brake Pistons Back Into Position 

While Installing New Brake Shoes 

■■Works With Most All Disc Brake Systems With Single Piston 

Caliper 

■■Features Heavy Duty Center Screw and Pressure Plate for 

Extended Use 

■■Use With a 1/2” Wrench or Socket 

■■Upgraded With a Knob That Allows for Use With Both a 5/16" 

Socket Wrench or Use By Hand 

■■Heavy Duty Plate to Reduce Bending 

■■Solid Swivel Foot Will Not Collapse or Crush Under Pressure 

■■Not for Use With an Impact Wrench 

Heavy Duty Brake Pad Separator 


3525D 082171035258 Carded Heavy Duty Brake Pad Separator 0.83 lb 1 

■■Attach Bleeder to Loosened Bleeder Screw and Pump Brake 

Pedal Until All Air Bubbles are Removed From the Hose 

■■Two Adapters Fit Most Bleeder Screws and Prevent Leakage 

While Keeping the Hose in Place 

One-Man Brake Bleeder 


2538D 082171025389 Carded One-Man Brake Bleeder 0.80 lb 1 


■■12 Ft Long Hose for Access Attached to Pulling Pole for 

Convenient Storage 

■■Automatic Fluid Shut-Off 

■■4 Gallon Capacity Tank 

■■New Industry Standard 2100 Series Disconnect 

■■Wheels Instead of Feet Mean Greater Mobility When Tank is Full 

Vacuum Brake Bleeder 


3737D 082171037375 Boxed Vacuum Brake Bleeder 3.43 lb 1 

3738 082171037382 Boxed Vacuum Brake Bleeder, Bleeder Only 2.32 lb 1 

3739 082171037399 Boxed Vacuum Brake Bleeder, Refill Bottle 0.32 lb 1 

1208


Brake Bleeder Tank 

■■Diaphragm-type Bleeder for Conventional and Anti-Lock Brake 

Systems Allows for One-Man Operation 

■■Diaphragm keeps Brake Fluid and Air Separated 

■■Custom Adaptors Available for Many Makes and Models 

■■Holds Approximately 4 Gallons 

■■Includes Combination Quick Coupler plus Automatic Fluid Shut- 

Off 

■■Steel Construction 

■■Caution: For use with DOT 2, 3, 4 and 5 Brake Fluids Only, Not 

for use with any other Brake / Hydraulic Fluid 


3795D 082171037955 Boxed Brake Bleeder Tank 20.6 lb 1 

Obsolete Part # Superseded by Key Features 

2222 Brake Bleeder Tank 3795 Brake Bleeder Tank 

4 gallon capacity, with wheels and hand post for mobility, disconnect 

changed to industry standard 

2901 Brake Bleeder Tank 2901 Brake Bleeder Tank Uses new industry standard disconnect - all else the same 

3353 Brake Bleeder Adapter 3796 Brake Bleeder Adapter GM Full-sized cars and trucks 

2417 Brake Bleeder Adapter 3789 Brake Bleeder Adapter Ford Full-sized cars and trucks 

3297 Brake Bleeder Adapter 3788 Brake Bleeder Adapter Domestic and Import Applications 

3354 Brake Bleeder Adapter 3787 Brake Bleeder Adapter GM Vans and Dodge Trucks 

New Application 3790 Brake Bleeder Adapter Many Import Applications 

New Application 

37951 Brake Bleeder Adapter - 100 Series to 2100 series 

Converts classic 2222 brake bleeder tank to new 37XX series master 

cylinder adapters 

New Application 

37952 Brake Bleeder Adapter - 2100 Series to 100 series 

Converts new 3795 brake bleeder tank to classic KD master cylinder 

adapters 

3294 Brake Bleeder Adapter No Replacement 

2216 Brake Bleeder Adapter No Replacement 

16 

Brake Bleeder Tank 

■■Safe, Portable Tank Fills and Pressurizes Standard and Power 

Brake Systems 

■■Operates from Hand Pump Pressure, Eliminating the need for an 

Air Compressor 

■■Only a Few Pumps are needed to Build Pressure to 10 to 15 PSI 

■■Tank is Serviceable and Features Quick Disconnect Coupler 

and Shut-off Valve that is Used as a Source for Brake Fluid 

when Topping off Master Cylinders with Brake Bleeder Adapter 

Attached 


2901D 082171029011 Boxed Brake Bleeder Tank 5.50 lb 1 

222273 82171337147 Boxed Replacement Part, Pressure Gauge 0.35 lb 1 

222276 82171337161 Bagged Replacement Part, Quick Disconnect Coupler 0.03 lb 1 

290171 82171291173 Bagged Replacement Part, O-Ring 0.01 lb 1 

290101 82171291104 Bagged Replacement Part, Valve 0.15 lb 1 


1209


■■Converts Classic 2222 and Classic 2901 Brake Bleeder Tank to 

new 37XX Series Master Cylinder Adapters 

Brake Bleeder Adapter, 100 Series to 2100 Series 


37951 082171379512 Boxed 

Coupler - Adapts Classic 2222 Brake Bleeder Tank to 3700 Series Master 

Cylinder Adapters 

0.25 lb 1 

■■Converts 3795D and 2901D Brake Bleeder Tank to classic KD 

Brand Master Cylinder Adapters 

Brake Bleeder Adapter, 2100 Series to 100 Series 


37952 082171379529 Boxed Coupler - Adapts 3795D Brake Bleeder to Classic Master Cylinder Adapters 0.24 lb 1 


■■Use for Pressurizing Brake Systems when Bleeding Dual Round 

Top Reservoirs 

■■Features Quick Disconnect Fittings for Fast Setup 

■■Adapter for Use With 3795D and 2901D Brake Bleeding Tanks 

Dual Bleeding Attachment 


3787 082171037870 Carded Dual Bleeding Attachment 0.93 lb 1 

■■Adapter Pressurizes Brake Systems on Many Applications 

Across Many Makes 

■■Use With 3-1/2" Round Reservoirs 

■■Adapter for use with 3795D and 2901D Brake Bleeding Tanks 

Universal Adapter 3.25” Diameter 


3788 082171037887 Carded Brake Bleeder, Universal Adapter 3.25” Diameter 0.97 lb 1 

1210




■■Use with Rectangular Reservoirs Under 3.75" X 7.75" Common 

on Trucks and Full Sized Vehicles 


Universal Adapter 3.75" X 7.75" 


3789 082171037894 Carded Brake Bleeder, Universal adapter 3.75” x 7.75” 3.86 lb 1 



■■Use with 4-1/8" Round Reservoirs 


Universal Round Adapter 4-1/8" 


3790D 082171037900 Carded Brake Bleeder, Universal Round adapter 4-1/8” 2.23 lb 1 

GM Bypass Adapter 

■■Adapter Pressurizes Brake Systems on Most GM Applications 

■■For use with 3795D and 2901D Brake Bleeding Tanks 


16 


3796 082171037962 Carded GM Bypass adapter 1.18 lb 1 


1211


■■For Tubing Service 

■■Broad Tubing Application Including Double Flare, Bend, Cut, 

Ream, and Deburr 

Tubing Service Set 


41590D 082171041594 Boxed Tubing Service Set 3.70 lb 1 


2107D Mini Tubing Cutter 41594 7 Pc. Flaring Adapter Kit 

2189D Tubing Bender 41595 Holding Bar 

3905D Deburring Tool 41596 Yoke For Flaring Tool 


■■Complete Double and Bubble Flaring Tool Assortment 




■■Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE/ 

Metric 45° Flares 

■■Hardened Bar Assembly Clamps 11 Tubing Sizes: 3/16", 1/4", 

5/16", 3/8", 7/16", 5/8", 1/2", 47, 6, 8, and 10mm 

■■Additional Set Contents: SAE Bar Assembly, Metric Bar 

Assembly, Yoke Assembly, Reamer, Cutter, 3/16" Flaring Tool 

Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 

3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring 

Tool Adapter, 5/8" Flaring Tool Adapter, 4.7 mm Flaring Tool 

Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, 

10mm Flaring Tool Adapter, and Cutter 

Combined Double / Bubble Flaring Tool Kit 


41880D 082171418808 Boxed Combined Double / Bubble Flaring Tool Kit 7.35 lb 1 


3905D Deburring Tool 41598D Bubble Flaring Tool Holding Bar 

41595 Holding Bar 41599 4 Pc. Bubble Flaring Adapter Kit 

41597 Universal Yoke 

1212


■■Complete Double Faring Tool Assortment 




■■Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE 45° 

Flares 

■■Hardened Bar Assembly Clamps 7 Tubing Sizes: 3/16", 1/4", 

5/16", 3/8", 7/16", 5/8", and 1/2" 


■■Additional Set Contents: SAE Bar Assembly, Yoke Assembly, 

Reamer, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 

5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" 

Flaring Tool Adapter, 1/2" Flaring Tool Adapter, and 5/8" Flaring 

Tool Adapter 

Double Flaring Tool Kit 


41860 082171418600 Carded Double Flaring Tool Kit (replaces 2199 & 3869) 4.05 lb 1 


3905D Deburring Tool 41595 Holding Bar 

41594 7 Pc. Flaring Adapter Kit 41597 Universal Yoke 

■■Complete Bubble Flaring Tool Assortment 




■■Precisely Flares Tubing Up to 0.040" Wall Thickness to Metric 

45° Flares 

■■Hardened Bar Assembly Clamps 4 Tubing Sizes: 4.7, 6, 8, & 

10mm 


■■Additional Set Contents: Metric Bar Assembly, Yoke Assembly, 

Reamer, 47mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 

8mm Flaring Tool Adapter, and 10mm Flaring Tool Adapter 

Bubble Flaring Tool Kit 


41870 082171418709 Carded Bubble Flaring Tool Kit (replaces 3482) 4.35 lb 1 


3905D Deburring Tool 41598D Bubble Flaring Tool Holding Bar 

41597 Universal Yoke 41599 4 Pc. Bubble Flaring Adapter Kit 

16 


1213


Mini Tubing Cutter 

■■Cut Thin-Wall Steel, Plastic, Copper and Brass Tubing From 1/8 

to 5/8" in Diameter 

■■Two Rollers Provide Burr-Free Cut 

■■Small Size Allows Cutter to Fit Into Tight Areas 


2107D 082171021077 Carded Mini Tubing Cutter 0.21 lb 1 

Tubing Cutter 

■■Tool Cuts Tubing, Copper, Brass, Aluminum and Thin Wall 

Conduit 

■■Features an 1/8 to 1-1/8" Capacity and Has a Reamer Blade to 

Clean Off and Smooth Any Sharp Edges 

■■Both the Cutter Wheels and Reamer are Made of Hardened Alloy 

Steel 


3457 082171034572 Carded 0.70 lb 1 


Tubing Bender 

■■Bend 3/16, 1/4, 5/16, and 3/8" Diameter Tubing Without Kinking 

■■Place Tubing in Groove and Turn the Handle to Bend 

■■Heavy-Duty Construction Provides Years of Service 


2517D 082171025174 Carded Tubing Bender 0.60 lb 1 

Tubing Bender 

■■Bend 3/16", 1/4", 5/16" and 3/8" Copper and Steel Tubing 

■■Tool Makes Tight Bends without the Tube Collapsing 

■■Roller Adapters are Included for each Tubing Size 

■■Place Tubing Between the Adapter and Studs and Squeeze the 

Handles to Bend 


2189D 082171021893 Carded Tubing Bender 1.17 lb 1 

1214


Deburring Tool 

■■Deburring Tool for Removing Rough Edges for Better Flaring 

Tube Fit 


3905D 082171390500 Carded Deburring Tool 0.15 lb 1 

Brake Cylinder Hone 

■■Tool Hones Drum Brake Wheel Cylinders and Disc Brake 

Calipers From 3/4 to 2-1/2" (19 to 64mm) in Diameter 

■■Sleeve Makes Insertion in Cylinder Easy and Protects Stones 

When Not in Use 

■■Use with a Variable-Speed Drill 

■■Use 2004D Stone Set for Disc Brake Honing and 266 for Drum 

Brake Honing 


265D 082171002656 Carded Brake Cylinder Hone 0.25 lb 1 

■■Stones Fit Brake Cylinder Hones 265D, 2544 and 267 

Replacement Stones 

16 


2004D 082171020049 Carded 

3 Replacement Stones for Converting 3-Legged 265D or 2544 Cylinder Hone to 

Disc Brake Hone; Size 400, 3/4" 

0.32 lb 1 

266 082171002663 Carded 3 Replacement Stones for 265D or 2544 Drum Brake Cylinder Hone; Size 320, 1" 0.23 lb 1 

■■Multi-Purpose Set Includes 3 Complete Hones and 1 Set of 2" 

Stones 

■■Complete Hone for Brake, Master and Wheel Cylinders 3/4 

through 2-1/2" Capacity, with 1-1/8" Medium-Grit Stones 

■■Complete Hone for Small Car Brake Wheel Cylinders 1/2 

Through 1-3/4" Capacity, with Two 1-1/8" Medium-Grit Stones 

■■Complete Hone for Disc Brake Caliper Honing. 1-1/4" Through 

3-1/2" Capacity, with 3/4" Medium-Grit Stones; also Ideal for 

Lawn and Garden Small-Engine Cylinder Honing when used with 

Three 2" Medium-Grit Stones (Included) 

■■Replacement Part: 3029-75 Three 2" Cylinder Hone Stones 

Economy Brake and Engine Cylinder Hone Set 



3029 082171030291 Carded Economy Brake and Engine Cylinder Hone Set 0.60 lb 1 

302975 82171318313 Carded Replacement Part, Three 2" Cylinder Hone Stones 0.11 lb 1 

1215


■■Color Coded Brake Gauge Identifies Thickness Levels for Brake 

Lining Inspection 

■■Metric - 8, 10, & 12mm (Green), 4, 5, 6mm (Yellow), 2 & 3mm 

(Red) 

■■SAE - 0.3150 to 0.4720" (Green), 0.1575 to 0.2382" (Yellow), 

0.0787 to 0.1181" (Red) 

Brake Lining Thickness Gauge 


3962 082171396205 Carded Brake Lining Thickness 0.58 lb 1 

■■Gauge Measures Brake Lining Remaining on Bonded Pads in 

Fractions From 1/16" to 5/8" in 1/32" Graduations 

■■Tool Checks Measurement Without Removing Caliper 

■■Tool is Patented 

Disc Brake Lining Wear Gauge 


2116D 082171021169 Carded Disc Brake Lining Wear Gauge 0.20 lb 1 


■■Gauge Measures Bonded Brake Lining From 0 to 1/2" in 1/64" 

Graduations 

■■Place Gauge Over Brake Shoe to Take Reading 

Brake Lining Gauge, Wide Band 


2324D 082171023248 Carded Brake Lining Gauge 0.35 lb 1 

■■Measure the Amount of Lining Remaining on Riveted Drum 

Shoes and Disc Brake Pads 

■■Gauge Measures Tire Tread Depth Up to 9/16" in Graduations of 

1/64" 

Tire Tread And Brake Lining Gauge 


2326D 082171023262 Carded Tire Tread and Brake Lining Gauge 0.20 lb 1 

1216


■■Used to Set the Proper Clearance Between Brake Lining and 

Drum Prior to Assembly 

■■Inside Calipers Measure Drum Diameters and Outside Calipers 

Transfer Measurement to Brake Shoes 

■■Knurled Knob Locks Tool at Measurement 

■■Diameter Range: 6-1/2" to 14-1/4" 

■■Calibrated in 1/32" (1mm) Increments 

Brake Resetting Gauge 


3377 082171033773 Carded Brake Resetting Gauge 1.50 lb 1 

■■LCD Displays Up to 5 Digits 

■■Glass Window Over LCD is Clearer and Does Not Wear Out 

■■Color Coded Off, On/Zero and Inch/mm 

■■Stainless Steel Frame with Hardened Jaws, Graduated 

■■Scale and Thumb Roll 

■■4 Way Measurement, Inside, Outside, Depth & Step 




6" Digital Caliper with Large LCD window 


3756D 082171037566 Boxed 0.76 lb 1 

16 

■■English Dial Gauge Range: 0-1.3", Gradations: 0.001" 

■■Centered V-Magnet for Strongest Grip on Round or Flat 

Surfaces 

■■Powerful 130 Lbs. Pull 

■■Two Magnetic Mounting Surfaces: Bottom and Back 

■■Swivel Adapter to Mount All Agd Dial Indicators with Lug Backs 

■■Universal Dovetail Clamp for Dial Test Indicators 

■■On / Off Switch 

■■Center Rod 1/2" Diameter X 7" High 

Dial Indicator Set with On/Off Stand 



3761 082171037610 Boxed 4.64 lb 1 

1217



■■0-1.3", (0-76mm) Grad. 0.001" 

■■3-1/2" Deep Throat 



■■With Data Output Interface 

■■Measures Thickness of Inside Groves 


Electronic Digital Rotor Micrometer 


3763 082171037634 Boxed 3.72 lb 1 


■■0 to 6" 





■■Measure Wear Dimension of the Brake Rotors 



Digital Brake Rotor Gauge 


3774D 082171037740 Boxed 1.01 lb 1 

■■3" to 16" 

■■Preset at 1-1/2" Depth with Indicators for 0.5" and 1" 





■■Measure Wear Dimension of the Brake Drum 



Digital Brake Drum Gauge 


3777 082171037771 Boxed 4.06 lb 1 

1218


Axle Nut Set 

■■7 Extra Long 1/2" Drive 6 Point Metric Sockets are Ideal for 

Heavy-Duty Use in Removing and Installing Axle Nuts Use With 

a Ratchet, Breaker Bar, Impact Wrench, or Torque Wrench 


41650 082171416507 Boxed Axle Nut Set 12.39 lb 1 


3907D 29mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford 3908D 35mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 

3161D 30mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 3162D 36mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 

3270D 32mm Deep 1/2" Dr. Deep Axle Nut Socket, Honda/Chrysler 3909D 38mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford 

3449D 34mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 

Axle Nut Sockets 

■■These 7 Extra Long 1/2" Drive 6 Point Metric Sockets are Ideal 

for Heavy-Duty use in Removing and Installing Axle Nuts 

■■Use with a Ratchet, Breaker Bar, Impact Wrench, or Torque 

Wrench 


3907D 082171390708 Carded 29mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford 0.80 lb 1 

3161D 082171031618 Carded 30mm Deep 1/2" Dr. Deep Axle Nut Socket, GM 1.25 lb 1 

3270D 082171032707 Carded 32mm Deep 1/2" Dr. Deep Axle Nut Socket, Honda/Chrysler 1.45 lb 1 




3909D 082171390906 Carded 38mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford 2.22 lb 1 

■■Removes Front Spindle to Access Needle Bearing When 

Lubricating and Aligning Front Wheels 

■■5/8"-18 Fine Thread Permits Use With Slide Hammer 

■■Fits Spindle Thread Sizes 2"-16, 1-5/8"-16, and 38mm-15 

■■Applications: Full-Size GM, Ford, Jeep and International Pickups 

With Dana Front Axles, Plus Ranger and Bronco Ii 

4WD Spindle Puller with Internal Threads 

16 



3910D 082171391002 Carded 4WD Spindle Puller 0.80 lb 1 

1219


Spindle Nut Set 

■■6 Chrome Vanadium Steel 1/2" Drive Sockets are for Most 4WD 

SUV's and Light Truck Axle Locknut Applications 

■■Use With a Torque Wrench, Ratchet, or Breaker Bar 


41660D 082171416606 Boxed Spindle Nut Set 13.48 lb 1 


2467 4-Lug 4WD Spindle Nut Socket, 1/2 to 3/4 Ton Dana 44 3910D 4WD Spindle Puller 

2770D 6-Lug 4WD Spindle Nut Socket, 3/4 to 1 Ton Dana 44 3911D Toyota Lock Nut Tool 

3195D 4-Lug Socket with Extension 1/2 Ton Dana 80 3937 4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50 

■■Removes Spindle Nuts on 4-Wheel Drive Vehicles 

■■Features Uniquely Designed Lugs for Maximum Strength 

■■Use With 1/2" Square Drive Tool 

■■Will Work on Ford Vehicles With Ratcheting Type Lock Nuts on 

Front Axle 

■■Caution: Do not use with Power Tools 

4-Wheel-Drive Spindle Nut Wrench 



2467 082171024672 Carded 4-Lug 4WD Spindle Nut Socket, 1/2 to 3/4 Ton Dana 44 1.35 lb 1 

2770D 082171027703 Carded 6-Lug 4WD Spindle Nut Socket, 3/4 to 1 Ton Dana 44 1.50 lb 1 

3246D 082171032462 Carded 4-Wheel-Drive Spindle Nut Wrench, Dana Axle or Dana 50IFS 1.80 lb 1 

Toyota Lock Nut Tool 


3911D 082171391101 Carded Toyota Lock Nut Tool 0.80 lb 1 

55mm Lock Nut - 1/2 Drive 


3912D 082171391200 Carded 55mm Lock Nut - 1/2 Drive 0.80 lb 1 

1220


■■Remove and Install 4-Slot Front Axle Locknuts on 1981-97 Ford 

F250- 350, Bronco With Dana Axle, or Dana 50Ifs or Model 60 

Monobeam Axle Outer Adjusting Nut; 1982-90 GM Heavy Duty 

3/4- and 1-Ton Trucks 

4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50 


3937 082171393709 Carded 4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50 1.02 lb 1 

■■Specially Designed Wrench Removes Ford High-Sheer 

Ratcheting Lock Nut on Popular F250/350 Series Trucks 

■■Special Feature Includes a Centering Snout to Help Locate 

Special Axle Nut and Uniquely Designed Lugs for Maximum 

Strength 

■■Use With 1/2" Drive Tool 

■■Applications:1985 and newer Ford F250-350 With Dana 80 Rear 

Axle, and 10 1/4" Ring Gear, 1987 E350 and newer with Dana 80 

Rear Axle and 10 1/4" Ring Gear, 1988 and newer F Super Duty 

With Dana 80 Rear Axle and 10 1/4" Ring Gear 

■■Caution: Do not use with Power Tools 

Ford Spindle Nut Wrench 


3195D 082171031953 Carded 4-Lug Socket with Extension 1/2 Ton Dana 80 2.03 lb 1 

16 

■■Install Tapered Bearing Races and Seals Without Damage to the 

Component or Housing 

■■Includes a Driver Handle Plus 9 Popular Bearing and Seal Drivers 

Ranging From 1.565" to 3.180" 

Bearing Race and Seal Set 


41630D 082171416309 Boxed Bearing Race and Seal Set 4.74 lb 1 


41631D Driver Handle 41636D 2.470" Driver 

41632 1.565" Driver 41637 2.555" Driver 

41633 1.750" Driver 41638 2.830" Driver 

41634 1.961" Driver 41639 2.995" Driver 

41635 2.325" Driver 41640 3.180" Driver 


1221


■■Self-Contained Bearing Packer Saves Time and Can Be Used 

Anywhere 

■■No Air Line or Grease Gun Required 

■■Packs 50 to 60 Bearings Without Refilling 

■■Transparent, Impact Resistant Cup Allows Grease Level Check 

■■Use on All Cage-Type Roller and Ball Bearings Up to 2" Bore 

Hand Bearing Packer 


2775D 082171027758 Carded Hand Bearing Packer 0.90 lb 1 

Wheel Weight Tool 

■■Tool Installs, Removes, Trims and Tightens All Types of Clip-On 

Wheel Weights 

■■It Features a Special Plastic-Type Material on the Hammer 

Head for Safe, Mar-Free Installation of Specially Coated Wheel 

Weights Used on Alloy Wheels 

■■Tool Has a Plastisol-Dipped Handle for Comfort 

■■Replacement Part: 335804 Plastic Tip 



3358 082171033582 Carded Wheel Weight Tool 1.10 lb 1 

335804 82171335808 Carded Replacement Plastic Tip 0.23 lb 1 


■■Complete SAE and Metric Stud Remover Set Offers the Best 

Professional Extractors Available 

■■Designed and Tested to Reach Studs in Difficult Work Areas 

8 Pc. SAE/Metric Stud Removal Set 


41760D 082171417603 Boxed 8 Pc. SAE/Metric Stud Removal Set 2.55 lb 1 


41761 6mm Removal Socket 3/8" Drive 41768D 1/4" Removal Socket 3/8" Drive 

41762D 8mm Removal Socket 3/8" Drive 41767D 5/16" Removal Socket 3/8" Drive 

41763D 10mm Removal Socket 1/2" Drive 41765 3/8" Removal Socket 1/2" Drive 

41764 12mm Removal Socket 1/2" Drive 41766 7/16" Removal Socket 1/2" Drive 

1222


Stud Removal Sockets 


41761 082171417610 Bagged 6mm Removal Socket 3/8" Drive 0.15 lb 1 

41762D 082171417627 Bagged 8mm Removal Socket 3/8" Drive 0.15 lb 1 

41763D 082171417634 Bagged 10mm Removal Socket 1/2" Drive 0.15 lb 1 

41764 082171417641 Bagged 12mm Removal Socket 1/2" Drive 0.15 lb 1 

41765 082171417658 Bagged 3/8" Removal Socket 1/2" Drive 0.15 lb 1 

41766 082171417665 Bagged 7/16" Removal Socket 1/2" Drive 0.15 lb 1 

41767D 082171417672 Bagged 5/16" Removal Socket 3/8" Drive 0.15 lb 1 

41768D 082171417689 Bagged 1/4" Removal Socket 3/8" Drive 0.15 lb 1 






Threads 


■■Simply Tighten the Screw Until the Nut Splits Has Rugged Drop- 

Forged Frame 


■■Length: 6-3/4" 







16 



Hammer 














1223


Stud Extractor 

■■Removes 1/4" (6mm) to 3/4" (19mm) Studs 

■■Cam Wheel Grips Within 9/32" of Flat Surface to Hold Stud 

■■Drive Socket Will Not Bind 

■■Use 1/2" Square Drive Tools to Operate 


1708DD 082171017087 Carded Stud Extractor 0.85 lb 

■■180 Degree Swivel Action 

■■Cushion Grip Dual Material Handle Provides Greater Comfort 

and Better Gripping Force 

■■Stainless and Plated Steel Material Band for Lifetime Corrosion 

Resistance 

■■Dimpled for Extra Gripping Power 

■■Specially Designed to Fit Today's Oil Filters 

Pro Swivoil Filter Wrench 


Cat. No. UPC No. Packaging Description Min Diameter Max Diameter Product Weight Shelf Pack Qty. 

3941 082171394102 Carded Pro Swivoil Filter Wrench - Small 2.52 in, 64 mm 2.99 in, 76 mm 1.20 lb 1 

3942 082171394201 Carded Pro Swivoil Filter Wrench - Medium 2.87 in, 73 mm 3.27 in, 83 mm 1.30 lb 1 

3943 082171394300 Carded Pro Swivoil Filter Wrench - Large 3.50 in, 89 mm 3.90 in, 99 mm 1.30 lb 1 

3944 082171394409 Carded Pro Swivoil Filter Wrench - Extra Large 3.78 in, 96 mm 4.37 in, 111 mm 1.40 lb 1 

■■Wrenches are Made of High-Quality Steel With a Zinc-Plated 

Yoke and a Blackened Band for Resistance to Rust and 

Corrosion 

■■Plastisol-Dipped Handle will not Slide Off During Use 

■■Even Hard-To-Reach Oil Filters Will Come Off Easily with this 

Swivel-Handle Oil Filter Wrench 

■■Unique Yoke and Link Assembly Allows a Good Grip, but will not 

Crush the Filter 

■■Swivel Tension is Adjusted Easily by Using the Nut and Bolt on 

the Handle 

Swivoil Filter Wrench 


3324D 082171033247 Carded Swivoil Filter Wrench - Small 2.50 in, 64 mm 3.00 in, 76 mm 0.70 lb 1 

3083D 082171030833 Carded Swivoil Filter Wrench - Medium 2.88 in, 73 mm 3.25 in, 83 mm 0.70 lb 1 

3082D 082171030826 Carded Swivoil Filter Wrench - Large 3.50 in, 89 mm 3.88 in, 98 mm 0.75 lb 1 

3527 082171035272 Carded Swivoil Filter Wrench - Extra Large 3.88 in, 96 mm 4.38 in, 111 mm 0.80 lb 1 

1224

O I L F I L T E R W R E N C H E S 

■■Wrench Removes Oil Filters 3-7/16" to 3-3/4" (87 to 95mm) in 

Diameter 

■■Its Positive Grip Lets You Exceed Normal Torque Requirements 

■■The Band Will Not Puncture or Crush Filter 

Universal Oil Filter Wrench 


190 082171001901 Carded Universal Oil Filter Wrench 3.44 in, 87 mm 3.75 in, 95 mm 0.65 lb 1 

Oil Filter Wrench 

■■Wrench Removew Oil Filters 3-1/16" to 3-7/16" (78 to 87mm) in 

Diameter 

■■Positive Grip Lets You Exceed Normal Torque Requirements 

■■Band Will Not Puncture or Crush Filter 


191 082171001918 Carded Oil Filter Wrench 3.06 in, 78 mm 3.44 in, 87 mm 0.55 lb 1 

■■Wrench Removes Gasoline and Oil Filters 2-1/4" to 2-9/16" (57 to 

65mm) in Diameter 

■■Design Prevents Crushing of the Filter Case 

Fuel and Oil Filter Wrench 

16 


192 082171001925 Carded Fuel and Oil Filter Wrench (2-1/4" to 2-9/16") 2.25 in, 57 mm 2.56 in, 65 mm 0.55 lb 1 

■■Notched Link Set to 1 to 3 Positions - Removes Oil Filters From 

2-3/4" to 3-3/4" (70 to 95mm) in Diameter 

■■Wide Range of Sizes Makes this Wrench Very Universal 

Adjustable Oil Filter Wrench 



2187D 082171021879 Carded Adjustable Oil Filter Wrench (2-3/4" to 3-3/4") 2.75 in, 70 mm 3.75 in, 95 mm 0.58 lb 1 

1225


■■Removes Oil Filters 4" to 4-3/8" (102 to 111mm) in Diameter 

Found on Most Tractors and Trucks 

■■Positive Grip Lets You Exceed Normal Torque Requirements 

Band Will Not Crush Filters 

Truck and Tractor Oil Filter Wrench 


2010D 082171020100 Carded Truck and Tractor Oil Filter Wrench (4" to 4-3/8") 4.00 in, 102 mm 4.38 in, 111 mm 0.70 lb 1 

■■For Hard-To-Reach Areas, Use This Wrench in Place of 190 to 

Remove Filters 3-7/16" to 3-3/4" (87 to 95mm) in Diameter 

■■To Use, Turn Filter With 3/8" Square Drive Tools Band Will Not 

Crush Filter 


Square Drive Oil Filter Wrench 

Cat. No. UPC No. Packaging Description Min Diameter Max Diameter 

2029DD 082171020292 Carded Square Drive Oil Filter Wrench (3-7/16" to 3-3/4") 3.44 in, 87 mm 3.75 in, 95 mm 0.48 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 


■■Provides High Torque Capacity 

■■Handles 140 Ft-Lbs. of Torque to Remove Even the Most 

Stubborn Filters 

■■Competitive Filter Cap Wrenches Do Not Even Come Close to 

this Capacity 

■■Metal Drive Insert Will Not Deform or Break Even After Years of 

Service 

■■Set Comes in Blow Mold Case 

5 Pc. Oil Filter End Cap Wrench Set 


3865 082171038655 Carded 5 Pc. Oil Filter End Cap Wrench Set in Case 1.25 lb 1 


3860D Oil Filter End Cap Wrench, 14 Flute, 65/67mm Plastic 3863 Oil Filter End Cap Wrench, 15 Flute, 93mm Plastic 

3861D Oil Filter End Cap Wrench, 15 Flute, 74/76mm Plastic 3864D Oil Filter End Cap Wrench, 36 Flute, 76/80/93mm Plastic 

3862D 

Oil Filter End Cap Wrench, 14 Flute, 76mm Plastic 

1226


Filter Cap Wrenches 

■■Provides High Torque Capacity 

■■Handles 140 Ft-Lbs. of Torque to Remove Even the Most 

Stubborn Filters 

■■Competitive Filter Cap Wrenches Do Not Even Come Close to 

this Capacity 

■■Metal Drive Insert Will Not Deform or Break Even After Years of 

Service 


3860D 082171038600 Carded Oil Filter End Cap Wrench, 14 Flute, 65/67mm Plastic 0.25 lb 1 

3861D 082171038617 Carded Oil Filter End Cap Wrench, 15 Flute, 74/76mm Plastic 0.25 lb 1 

3862D 082171038624 Carded Oil Filter End Cap Wrench, 14 Flute, 76mm Plastic 0.25 lb 1 

3863 082171038631 Carded Oil Filter End Cap Wrench, 15 Flute, 93mm Plastic 0.25 lb 1 

3864D 082171038648 Carded Oil Filter End Cap Wrench, 36 Flute, 76/80/93mm Plastic 0.25 lb 1 

■■Wrench Removes and Installs 14-Flute, 65mm Factory Oil Filters 

on Late-Model Toyota Tercel, Mr2, Celica and 1988 Camry 

■■Use With A 

■■3/8" Drive Tool or a 1" Wrench 

65mm End Cap Oil Filter Wrench 


3253D 082171032530 Carded 65mm End Cap Oil Filter Wrench 0.30 lb 1 

16 

■■Specially Designed Wrench Removes and Installs Hard-To- 

Reach 3" (76mm) Oil Filters with a 15-Flute End 

■■Fits Various Flute Designs Found on AC/Delco, Fram, Wix, Step, 

NAPA, Sears, Gard, Motorcraft and Other Filters 

■■Use with 3/8" Square Drive Tool or a 1" Wrench 

■■Durable Steel Wrench is Zinc Plated to Resist Rust 

■■Be Sure Fluted End of Filter Matches Wrench 


3" End Cap Oil Filter Wrench 


2790D 082171027901 Carded 3" End Cap Oil Filter Wrench 0.45 lb 1 

■■Wrench Removes and Installs 3-3/4" (95mm) Diameter Filters 

with 15-Flute Ends 

■■Designed for use with a 3/8" Square Drive Tool or a 1" Wrench 

■■Tool is Zinc Plated to Resist Rust 

■■Be Sure Fluted End of Filter Matches Wrench 

3-3/4" End Cap Oil Filter Wrench 



2991D 082171029912 Carded 3-3/4" End Cap Oil Filter Wrench 0.50 lb 1 

1227


■■Pliers Cover a Complete Range of Filter Removal From 2" to 5" 

(50mm to 125mm) in Diameter 

■■Ratchet and Lock Mechanism Allow for Multiple Settings for 

Sure Fit, Eliminating Slippage 

■■Jaws are Grooved for Better Holding of the Filter 

■■Forged for Superior Strength 

■■Plastisol Coated Handles Provide a Firm Grip 

Adjustable Oil Filter Wrench Pliers 


3508D 082171035081 Carded Oil Filter Pliers - Ratcheting (2" to 5") 2.00 in, 50 mm 5.00 in, 125 mm 1.17 lb 1 

Oil Filter Wrench Pliers 

■■Pliers Remove Stubborn, Stuck Filters 

■■Unique, Dual-Handle Styling Allows for Better Leverage to Bear 

Down Harder 

■■Tool is Forged for Superior Strength and Double Dipped Handles 

Provide a Firm Grip 


3369 082171033698 Carded Slip Joint Oil Filter Wrench Plier (2-3/4" to 3-1/8") 2.75 in 3.13 in 1.20 lb 1 

3368 082171033681 Carded Slip Joint Oil Filter Wrench Plier (2-15/16" to 3-5/8") 2.31 in 3.63 in 1.25 lb 1 

3369F 082171336904 Carded Fixed Joint Oil Filter Wrench Plier (2-1/2" to 3-1/4") 2.50 in 3.25 in 1.16 lb 1 

3368F 082171336805 Carded Fixed Joint Oil Filter Wrench Plier (2-11/16" to 3-3/4") 2.69 in 3.75 in 1.22 lb 1 


■■Extra Wide 3” Band for Better Grip and Reduced Canister 

Damage 

■■Not for Use With Impact Guns 

Heavy Duty Oil Filter Wrenches, Wide Band 

Cat. No. UPC No. Packaging Description Min Diameter Max Diameter Product Weight 

2320W 082171232008 Carded Wide Heavy Duty Oil Filter Wrench (4-1/8" to 4-1/2") 4.13 in, 105 mm 4.50 in, 115 mm 0.45 lb 1 



Shelf 

Pack Qty. 

1228


■■Wrenches are Designed for High Torque Requirements of Truck 

Filters and Used With 1/2" Square Drive Tools 

■■1-1/2" Wide Bands for Added Strength and Increased Grip Area 


Heavy-Duty Oil Filter Wrenches 


2320D 082171023200 Carded Heavy Duty Oil Filter Wrench (3-3/4" to 4-1/2") 3.75 in, 95 mm 4.50 in, 115 mm 2.00 lb 1 

2321 082171023217 Carded Heavy Duty Oil Filter Wrench (4-1/2 to 5-1/4") 4.50 in, 115 mm 5.25 in, 135 mm 2.10 lb 1 

2322D 082171023224 Carded Heavy Duty Oil Filter Wrench (5-1/4-5-3/4) 5.25 in, 135 mm 5.75 in, 150 mm 2.54 lb 1 

■■Remove All Passenger Car and Light-Duty Truck Spin-On Type 

Filters With This Wrench 

■■Sizes Range From 2-1/2" to 3-3/4" 

■■Use With 3/8" Square Drive Tool 

Universal 3-Jaw Oil Filter Wrench 


3288D 082171032882 Carded Universal 3-Jaw Oil Filter Wrench 2.50 in 3.75 in 0.50 lb 1 

■■To Effectively Apply Torque, Wrap Tool Around Any Shape Item 

From 5/8" to 5" (16 to 127mm) in Diameter 

■■Turn With 1/2" Square Drive Tools 

■■Chain Length - 16-1/4" 

Chain Wrench,1/2" Square Drive 

16 


2595D 082171025952 Carded Chain Wrench, 1/2" Drive 0.63 in, 16 mm 5.00 in, 127 mm 1.73 lb 1 

■■Use Wrench on Oil Filters Up to a 6" (152mm) Diameter 

■■Strong Nylon Belt Will Not Slip 

■■Use With 1/2" Square Drive Tools 

Nylon Strap Oil Filter Wrench 


Cat. No. UPC No. Packaging Description Max Diameter Product Weight Shelf Pack Qty. 

3149 082171031496 Carded Nylon Strap Oil Filter Wrench, 1/2" Drive 6.00 in, 152 mm 0.50 lb 1 

1229


■■Strap is Made of High Strength Oil Resistant Nylon and Handle is 

Made of Forged Steel 

■■Chrome Plated 3/8" and 1/2" Drive Engagement 

■■Handles Filters With Diameters Up to 9" (229mm) Especially High 

Torque Requirements on Truck and Tractors 

Heavy Duty Oil Filter Strap Wrench 

Cat. No. UPC No. Packaging Description Max Diameter Product Weight Shelf Pack Qty. 

3529D 082171035296 Carded Heavy Duty Oil Filter Strap Wrench, 3/8" or 1/2" Drive 9.00 in, 229 mm 0.67 lb 1 


6 Pc. Oil Canister Socket Set Service Kit 


41890 082171418907 Boxed 6 Pc. Oil Canister Socket Set Service Kit 2.08 lb 1 



3935 24mm Oil Filter Socket 3932D 32mm Oil Filter Socket 

3933D 27mm Oil Filter Socket 3934D 36mm Oil Filter Socket 

3936 29mm Oil Filter Socket 3939D 38mm Oil Filter Socket 


3 Pc. Oil Canister Socket Set 


41830 082171418303 Boxed 3 Pc. Oil Canister Socket Set 1.15 lb 1 


3933D 27mm Oil Filter Socket 3934D 36mm Oil Filter Socket 

3932D 

32mm Oil Filter Socket 

1230



Oil Filter Sockets 


3935 082171039355 Carded 24mm Oil Filter Socket 0.22 lb 1 

3933D 082171393303 Carded 27mm Oil Filter Socket 0.25 lb 1 

3936 082171039362 Carded 29mm Oil Filter Socket 0.27 lb 1 




Steering Service Set 

■■Can Remove a Steering Wheel From Most Domestic and Import 

Cars With or Without Telescoping Tilt Columns 

■■Use the Puller Legs With the Steering Wheel Puller to Remove 

Steering Wheels on Late Model GM Vehicles 

■■Steering Wheel Lock-Plate Depressor also Included 


Product 

Weight 

41620D 082171416200 Boxed Steering Service Set 4.36 lb 1 

Shelf 

Pack 

Qty. 


2291D Crankshaft Pulley Puller (Steering Wheel Puller) - Lock Plate Depressor Frame 

3509D Steering Wheel Lock Plate Remover - Lock Plate Remover Collars & Nut Washer 

3510D Steering Wheel Puller Legs - Screw Package 

3906D 

Steering Wheel Pivot Pin 

■■Use with 2291D Steering Wheel Puller to Remove Steering 

Wheels on Vehicles that are not Pre-Drilled to Receive Standard 

Bolts 

Steering Wheel Puller Legs 

16 


3510D 082171035104 Carded 0.40 lb 1 

■■Fits GM Cars with S.I.R. Air Bags 

■■Works on Older GM, Chrysler, and AMC Vehicles Previously 

Serviced by Part # 2414 

■■Narrower Yoke Prevents Damage to the Lock Plate 

■■Separate SAE (black) and Metric (zinc) Threaded Collars Screw 

to the Center Steering Column 

■■Center Screw Uses a 3/8" Wrench 

■■Supplied Hex Screw Locks Down Telescoping Steering Columns 

while Removing Lock Plate 

■■Hex Screw can be Stored on Side of Puller Yoke 

Steering Wheel Lock-Plate Remover and Installer 



350971 082171509711 Industrial Polybag 0.63 lb 1 

350972 082171509728 Industrial Polybag 0.54 lb 1 

3509D 082171035098 Carded 1.30 lb 1 

1231

S T E E R I N G A N D S U S P E N S I O N 

Pivot Pin Remover 

■■Tilt Steering Columns are Much Easier to Service When Your 

Tool Box Has One of These Pivot Pin Removers in It 

■■Works on 1969-Current GM, Chrysler, and Ford Vehicles With 

Saginaw Steering Columns 


3906D 082171390609 Carded 0.15 lb 1 

■■Allows for Easy Removal of the Most Popular Types of Pitman 

Arms, Tie Rods, and Ball Joints 

Front End Service Set 



41690 082171416903 Boxed Front End Service Set 12.65 lb 1 


2289D Pitman Arm Puller - Tie Rod Puller 

3916D Universal Ball Joint Separator - Universal Tie Rod End Remover 

3917D 

Tie Rod End Puller and Pitman Arm Puller 

■■Works With Hand and Pneumatic Air Systems to Remove Tie 

Rods, Ball Joint and Pitman Arm Assemblies 

■■Includes Popular Sizes: 1-1/8", 15/16", and 11/16" 

■■Chrome Plated, Protects Against Corrosion and Provides 

Improved Visibility 

■■Knurled Handle for Better Grip 

Pneumatic Tie Rod / Ball Joint Separator Kit - 

3 Sizes 


41610 082171041617 Boxed Pneumatic Tie Rod / Ball Joint Separator Kit - 3 sizes 4.70 lb 1 

1232


■■Pneumatic and Manual Hammer Attachment 

■■Indexing Feature for Access and Leverage when Prying 

Suspension Components Apart 

■■Index to 90° to Strike Hammer Surface with Hand Safely Out of 

Way 

■■Dipped Grip on Manual Hammer Attachment to Absorb Shock 

and Eliminate Slip 

■■Blowmold Case for Storage 

Indexing Ball Joint and Tie Rod Separator Set 


43990 082171439902 Boxed Indexing Ball Joint and Tie Rod Separator Set 5.43 lb 1 


■■Indexing Feature for Access and Leverage when Prying Ball Joint 

Components Apart 


Way 



Indexing Ball Joint Separator 


3990 082171039904 Boxed Indexing Ball Joint Separator - 15/16" 3.25 lb 1 


■■Indexing Feature for Access and Leverage when Prying Tie Rod 

Components Apart 


Way 



Indexing Tie Rod Separator 


3991 082171039911 Boxed Indexing Tie Rod Separator - 21/32" 3.20 lb 1 

■■Tool Separates Ball Joints From Steering Knuckles 

■■To Use, Insert 15/16" Opening Between Parts and Strike With 

Hammer 

■■Separator is Forged to Withstand Hard Usage 


Ball Joint Separator 

16 



2287D 082171022876 Boxed Ball Joint Separator 1.99 lb 1 

1233


Tie Rod Separator 

■■Powerful Tool Separates Tie Rods 

■■Insert 21/32" Opening Between Parts and Strike With Hammer 

to Separate 

■■Separator is Forged to Withstand Hard Usage 




2288D 082171022883 Carded Tie Rod Separator 2.02 lb 1 

■■For Separating the Ball Joint From the Spindle Support Arm on 

Domestic and Import Front Wheel Drive Vehicles 

■■Adjustable for Different Size Ball Joints 

■■1-1/8" & 2-1/8" (30 & 56mm) Maximum Opening Capacity 

Universal Ball Joint Separator 



3916D 082171391606 Carded Universal Ball Joint Separator 1.13 lb 1 

■■Use As a Pitman Arm Remover for Many Small Domestic Rear 

Wheel Drive Vehicles, or as a Tie Rod End Puller for Many 

Domestic and Import Vehicles 

■■1-1/16" & 2-1/8" (27 & 56mm) Maximum Opening Capacity 

Tie Rod End Puller and Pitman Arm Puller 


3917D 082171391705 Carded Tie Rod End Puller and Pitman Arm Puller 1.00 lb 1 

■■Remove and Install Inner Tie Rods on Many GM and Some 

Chrysler Products That Have a Complete Hex With a Ball Socket 

or Just 2 Flats on the Inner End That Measure 1-7/16" Across 

■■Tool Can Also Be Used on All Inner Tie Rods With 1-3/16" and 

1-5/16" Hex Sizes 

Deluxe Inner Tie Rod Tool 


3312D 082171033124 Carded Deluxe Inner Tie Rod Tool 2.57 lb 1 

1234


Pitman Arm Puller 

■■Puller Removes Full-Size Pitman Arms 

■■To Use, Mount Jaws Over Pitman Arm and Turn Center Screw 

with Wrench Until Tight 

■■Strike Center Screw with Hammer to Release Pitman Arm 

■■No Other Tools are Needed 

■■Puller Has a Drop-Forged and Heat-Treated Steel Yoke 

■■Screw Size 5/8"-18 Thread 


2289D 082171022890 Carded 1.95 lb 1 

■■Allows for Proper Installation of C Boot 

■■Crimps Joints While With Center Pushing Feature 

■■Works With Hand, 1/2" Drive Ratchets, or Torque Wrench 

■■High Leverage Design 

CV Boot Clamp Tool 


3955 082171039553 Carded Replacement Part CV Boot Clamp (replaces 424) 1.25 lb 1 

■■Use This Tough Tool for Quick and Easy Replacement of Struts, 

Springs and Shock Absorbers 

■■Compress Springs Both On or Off the Vehicle With Hand or 

Power Tools 

■■Maximum Capacity: 6" OD 

■■Wire Diameter: 5/8" 

■■Caution: Follow Instructions Provided With This Tool 

Macpherson Strut Spring Compressor 

16 


3387 082171033872 Carded Macpherson Strut Spring Compressor 6.47 lb 1 

■■Use Tool to Remove and Install Automotive Coil Springs Up to 

5-5/8" Outside Diameter 

■■Designed to Grasp a Spring With a Maximum 3/4" Wire Diameter 

■■Can Be Used on Straight or Curved Springs 

■■Forged Alloy Steel Arms Hug Contour of Helix 

■■Caution: Read All Instructions Carefully Before Using This Tool 

■■Caution: For Intended Use Only 


Coil Spring Compressor 



3450D 082171034503 Carded Coil Spring Compressor 4.55 lb 1 

345071 082171450716 Bagged Replacement Clip 0.55 lb 1 

1235


■■Works by Hand or Ratchet with 1/2" Socket 

■■Includes Built in Cutter 

■■Use Wrench to Securely Fasten Band-It® Style Free End 

Clamps, Roll Band and Clips or Band-It Jr® Style Pre-Formed C 

Boot Clamps 

■■Mandrel Tightens the Clamp, Holding it in Place Until the Ears of 

the Clamp are Folded Down 

■■Use Built in Cutter to Remove Excess Band Material 

CV Joint Boot Clamp Tightening Wrench 


3191D 082171031915 Carded CV Joint Boot Clamp Tightening Wrench 0.55 lb 1 

■■Tool Clears Grease Fittings of Hardened Matter 

■■Fits Straight and Angled Zerk-Type Fittings 

■■To Use, Fill With Oil or Grease, Hold Against Zerk Fitting and 

Strike With a Hammer to Clear Away Debris 

Ramo-Matic Zerk Fitting Tool 


416D 082171004162 Carded Ramo-Matic Zerk Fitting Tool 0.40 lb 1 


■■Used to Release Fingers that Hold Clutch Line to the Clutch 

Sleeve Cylinders 

■■Works on Hard to Access Couplings Found on Ford Light-Duty 

Trucks, Ranger, Explorer and 1989 and Newer Thunderbird and 

Cougar Vehicles with Hydraulic Clutch 

■■Compresses Automatic-Transmission Clutch Springs on Some 

GM, Ford, Toyota and other Transmissions 

■■Permits Easy Removal and Installation of Snap Rings 

■■Job Can Be Completed Without Removing Center Shaft and 

Clutch Assembly from Transmission Housing 

■■To Use, Force Legs in and Catch Jaws Inside Transmission Drum 

Groove 

■■Loosen Wing Nuts and Adjust Pushers 

■■Tighten Screw Until Lock Ring is Free to Be Removed 

Hydraulic Clutch Quick Disconnect Tool 


3413D 082171034138 Carded Ford Clutch Coupling Tool 0.11 lb 1 

Automatic Transmission Clutch-Spring 

Compressor 


2398D 082171023989 Boxed Automatic Transmission Clutch-Spring Compressor 3.55 lb 1 

1236


■■Align Single Disc Clutches on American and Imported Cars, 

Light Trucks and Tractors 

■■Adapter Fits Through Clutch Plate and into Pilot Bushing or 

Bearing 

■■Tapered Cone Fits Into Clutch Hole and Aligns Clutch Plate 

Properly 

■■Set Includes Shaft and 8 Two-Stepped Pilot Bearing Adapters 

Covering 16 Sizes 

■■Plate Aligning Cone has 1-1/8" Maximum Diameter Taper. Pilot 

Bushing Cone Taper 0.734" to 1.17" (18.64mm to 29.72mm) 

■■Zinc Adapters for Import 0.472" & 0.500" (12mm & 12.7mm), 

0.622" & 0.641" (15.8mm & 16mm), 0.688" & 0.710" (17.4mm & 

18mm), 0.826" & 0.875" (21mm & 22.2mm) 

■■Black Adapters for Domestic 0.561" & 0.590" (14.2mm & 15mm), 

0.749" & 0.787" (19mm & 20mm), 0.812" & 0.874" (20.6mm & 

22.2mm), 0.984" & 1.181" (25mm & 30mm) 

10 Pc. Clutch Aligning Set 


2420D 082171024207 Boxed Clutch Aligning Set 2.08 lb 1 

■■Hooked End Removes Seals and Pilot Bearings without Breaking 

■■Roll Hook Under Edge of Seal and Hit Striking Block With 

Hammer 

■■Hook Can Be Used on Slide Hammer for Frozen Seals 

■■Puller Has 1/2"-13 UNC Threads 

■■Puller is Not Recommended for Caged Needle Bearings 

■■Damage to Caged Needle Bearings May Occur 

Seal and Pilot Bearing Puller 

16 


2824D 082171028243 Carded Seal and Pilot Bearing Puller 1.55 lb 1 

Seal Puller 

■■Use Tool to Remove Oil and Grease Seals on Automobiles and 

Light Trucks 

■■Puller Has 2 Tip Sizes for Most Applications 

■■To Use, Insert Tip Behind Seal and Use Leverage to Remove 

■■Caution: Do Not Use As a Striking Tool 

■■For Intended Use Only 



3245 082171032455 Carded Seal Puller 0.55 lb 1 

1237

G E N E R A L P U R P O S E 

■■Starter Assortment Includes 107 Different Size Internal and 

External Snap Rings in a Molded Plastic Case 

■■Actual-Size Silhouette Chart in the Lid Makes Identification Easy 

■■Ideal Assortment for Jobbers and Dealers to Keep on Hand 

■■Refills are Available 

■■Overall Case Size: 18 X 13 X 2-1/2" 

Snap Ring Assortment 


2550D 082171025501 Boxed Snap Ring Assortment 6.10 lb 1 

■■Magnetic 

■■Oil Resistant 

■■34-1/2" Wide 

■■18-1/2" Tall 

Fender Cover, Magnetic 



86991 099575869914 Boxed Magnetic Fender Cover 1.53 lb 1 

Mechanics Gloves 


86990 099575869907 Retail Packaging Mechanics Gloves 0.20 lb 1 

■■Aluminum Body with Rubber Grip 

■■Five LED Bulbs Above 13,000 MCD White Light 

■■Weatherproof 

■■Rubber Ring Around Head of Flashlight 

■■Includes Carrying Case 

Aluminum Flashlight 


83132 099575831324 Retail Packaging LED Flashlight with Carry Case 0.25 lb 1 

1238


O-Ring and Seal Pick 

■■Remove and Install O-Rings and Small Oil Seals 

■■Hardened Tip Keeps a Sharp Point 

■■Tool is Ideal for Transmission, Power Steering Pump, Disc Brake 

and Air Conditioning Repairs 


2554D 082171025549 Carded O-Ring and Seal Pick 0.04 lb 

■■Five-Piece Set Includes a 5" Aluminum Handle Knurled for a 

Sure Grip 

■■Includes the Following Heat-Treated, High Carbon Steel Picks: 

O-Ring, 90°, Straight and Hook 

■■Use Picks to Pull O-Rings, Seals, Cotter Pins and Brushes 

Quickly and Easily 

5 Pc. Hook and Pick Set 


3121D 082171031212 Boxed Hook and Pick Set 1.10 lb 

Vibro Engraver 

■■Use to Identify Valuables Permanently 

■■Carbide Tip Engraves Metal, Plastic, Wood, Glass and Other 

Surfaces 

■■Variable Speed Knob Controls the Depth of Engraving 

■■Tool Operates on 115V AC 

16 


2520 082171025204 Carded Vibro Engraver 0.70 lb 

Scriber 

■■Sharp, Tempered Point Scribes Metal 

■■Hooked End Removes O-Rings, Seals and Gaskets 

■■Has a 90° Hook 




2979 082171029790 Carded Scriber 0.15 lb 

1239







Threads 


■■Simply Tighten the Screw Until the Nut Splits Has Rugged Drop- 

Forged Frame 


■■Length: 6-3/4" 









Hammer 














1240

Keyed Industrial Chucks................... 1244 

Keyless Industrial Chucks................. 1248 

Rubber-Flex® Collet Chucks ........... 1250 

Arbors................................................ 1252 

Sleeves, Sockets & Ejecting Drifts... 1255 

Portable Tool Chucks ....................... 1256 

Special Purpose Chucks................... 1258 

Keys & Accessories........................... 1258 

17 

J A C O B S C H U C K S 

1241

C H U C K S 

Chucks 

Jacobs® chucks, high precision tool holders, arbors, and related accessories have made Jacobs the leading brand of precision 

tool holding and work holding devices in the world. For more than 100 years, superior grip and accuracy have made Jacobs the 

industry leader, with Jacobs technology applied to everything from sophisticated CNC machining centers to cordless portable drills. 

Our commitment to excellence and innovation and continued investment in research and development provide us with the ability to 

maintain this leadership position. 

HAND-TITE ® 

KEYLESS CHUCKS 

Split Bite Jaw increases grip over 

standard bite chucks by providing 

more contact with the bit 

Hammerlock® positive locking mechanism 

prevents loosening in hammer and other 

high vibration applications 

Precision Operation meets or exceeds 

stringent DIN run—out and dimensional 

specifications 

Provides high mechanical advantage 

to convert hand tightening torque into 

superior bit gripping force 

Material and surface finish combinations 

result in increased comfort and performance 

Anti-lock Nut prevents 

chuck from locking open 

Constructed of high performance material 

to maximize durability and performance 

J A C O B S C H U C K S 17 

MULTI-CRAFT 

KEYED CHUCKS 

Most popular 

chuck sold in 

the world 

Constructed of high 

quality materials 

for lasting life and 

performance 

Through-hardened jaws for hard, wearresistant 

gripping surfaces 

Time-tested design 

normally found only in 

industrial-grade chucks 

1242

C H U C K S 

Nomenclature 

Chucks and Keys 

Tool Holders 

TOOL AND WORK HOLDER DEFINITIONS 

ARBOR: Chuck mounting device used to adapt standardized chuck mounts to 

various machine spindle tapers. Arbors are also used to adapt mounts to other 

rotating devices such as machine spindles and lathes. 

SLEEVE: Adapter for arbors when the machine spindle requires a larger taper 

than is available on the arbor. 

EXTENSION SOCKET: Adapting device which increases effective spindle length 

and provides more flexibility when adapting to various taper sizes. 

CENTERS: Support device for a workpiece when unusually long items or 

extreme accuracy are important. Available generally as rotating (“live”) and 

stationary (“dead”) designs. 

17 

Chuck and Accessory Removal Tools 


REMOVAL TOOL DEFINITIONS 

EJECTING DRIFT: Hardened steel accessory used to disassemble self-holding 

taper components. 

WEDGES: Tapered steel plates used in pairs to disassemble chucks from 

arbors and spindles. 

1243

B A L L B E A R I N G C H U C K S 

Ball Bearing - Taper Mount 

■■Ball Bearing Construction Maximizes Gripping Force and Drilling 

Accuracy 

■■Jaws Center-Ground for Straightness and Alignment 

■■One-Piece Sleeve Eliminates Crack Between Driving Teeth Often 

Found in Other Designs 

■■Through-Hardened Sleeve Teeth Plus Hardened Nose and 

Keyholes Provide Outstanding Wear Resistance 

■■Fluted Sleeve Standard 

■■Each Chuck 100% Inspected for Performance and Precision 

■■T.I.R. 0.003" Maximum at Half Capacity 


Model 

No. 

Min. 

Capacity 

Max. 

Capacity Mount Key No. 

30209 095456302099 Boxed 8-1/2N 0.040 in 0.250 in 2SJT K30 2.41 in 1.95 in 1.56 in 0.63 lb 1 

30215 095456302150 Boxed 11N 0.040 in 0.375 in 2JT K32 2.88 in 2.26 in 1.93 in 1.22 lb 1 

30221D 095456302211 Boxed 14N 0.040 in 0.500 in 3JT K3 3.88 in 2.97 in 2.44 in 2.44 lb 1 



30239D 095456302396 Boxed 20N 0.375 in 1.000 in 5JT K5 5.5 in 4.23 in 3.65 in 7.62 lb 1 

Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 

Replacement Parts - Sleeves 


Cat. No. UPC No. Packaging Description Model No. Product Weight Shelf Pack Qty. 

5089D 095456050891 Bagged Replacement Sleeve for Model 8-1/2N 8-1/2N 0.20 lb 1 

5097 095456050976 Bagged Replacement Sleeve for Model 11N 11N 0.30 lb 1 

5506D 095456055063 Bagged Replacement Sleeve for Model 14N 14N 0.52 lb 1 




Replacement Parts - Service Kits (Newer Models) 

■■For the New and Improved Jacobs Super Chuck® That Includes 

the Service Kit Number on the Chuck Nose 

■■Kit Includes Jaws, Nut, Caged Bearing, and Thrust Washer 


30343 095456303430 Bagged Chuck Service Kit for Model 8-1/2N 8-1/2N 0.14 lb 1 

30344 095456303447 Bagged Chuck Service Kit for Model 11N 11N 0.20 lb 1 

30345D 095456303454 Bagged Chuck Service Kit for Model 14N 14N 0.45 lb 1 




1244

B A L L B E A R I N G C H U C K S 

Replacement Parts - Service Kits (Older Models) 

■■For the Older Models Which Do Not Incorporate the Service Kit 

Marking on the Chuck Nose 

■■Kit Includes Jaws, Nut, Caged Bearing, and Thrust Washer 


33416 095456334168 Bagged Chuck Service Kit for Model 8-1/2N 8-1/2N 0.14 lb 1 






Plain Bearing Taper Mounted - Heavy Duty Model 

■■Jaws Center-Ground for Absolute Straightness and Alignment 



■■Through-Hardened Sleeve Teeth, Plus Hardened Nose and 



■■T.I.R. .004" Maximum at Half Capacity 

■■KD Models Have Keyed Drive Feature 

■■PD Models Have Pin Drive Feature 

■■34-33C Has Smooth Sleeve with Locking Collar 

17 


Model 

No. 

Min. 

Capacity 

Max. 


6223 095456062238 Boxed 3A 0.125 in 0.625 in 3JT K3 3.81 in 2.87 in 2.30 in 2.10 lb 1 

6228 095456062283 Boxed 3KD 0.125 in 0.625 in 3JT K3 4.06 in 3.12 in 2.29 in 2.20 lb 1 

6230 095456062306 Boxed 3PD 0.125 in 0.625 in 3JT K3 4.06 in 3.12 in 2.29 in 2.20 lb 1 

14442 095456144422 Boxed 34-02 0.040 in 0.500 in 2JT K3 3.52 in 2.74 in 2.04 in 1.75 lb 1 

6295D 095456062955 Boxed 34-06 0.040 in 0.500 in 6JT K3 3.52 in 2.74 in 2.04 in 1.70 lb 1 

14445 095456144453 Boxed 34-33 0.040 in 0.500 in 33JT K3 3.52 in 2.74 in 2.04 in 1.72 lb 1 

14451 095456144514 Boxed 34-33C 0.040 in 0.500 in 33JT K3C 3.71 in 2.93 in 2.00 in 1.63 lb 1 

6309D 095456063099 Boxed 36 0.18 in 0.800 in 3JT K4 4.06 in 3.14 in 2.54 in 3.02 lb 1 

Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 


1245

P L A I N B E A R I N G C H U C K S 

Taper Mounted - Medium Duty Model 








■■KD Models Have Keyed Drive Feature 

■■All Model 33 Plain Bearing Chucks are Hammer Capable. 


Model 

No. 

Min. 

Capacity 

Max. 

Capacity 

6200 095456062009 Boxed 0 0.0135 in 0.156 in 0JT KO 1.404 in 1.100 in 0.850 in 0.18 lb 1 

6206D 095456062061 Boxed 1A 0.040 in 0.250 in 1JT K1 1.920 in 1.540 in 1.180 in 0.32 lb 1 

33348 095456333482 Boxed 2 0.040 in 0.375 in 1JT K2 2.490 in 2.010 in 1.420 in 0.95 lb 1 

6214D 095456062146 Boxed 2A 0.040 in 0.375 in 2JT K2 2.810 in 2.170 in 1.670 in 0.90 lb 1 

6279D 095456062795 Boxed 33 0.08 in 0.500 in 33JT K32 3.210 in 2.520 in 1.792 in 1.16 lb 1 

6281D 095456062818 Boxed 33KD 0.08 in 0.500 in 33JT K32 3.460 in 2.770 in 1.792 in 1.20 lb 1 

6291 095456062917 Boxed 3326A 0.08 in 0.500 in 

Mount 

0.6250 STRAIGHT 

MOUNT 

Key 

No. 

Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 

K32 3.540 in 2.850 in 1.792 in 1.28 lb 1 

Thread Mounted - Heavy Duty Model 










Model 

No. 

Min. 

Capacity 

Max. 


33351 095456333512 Boxed 3B 1/2 0.125 in 0.625 in 1/2-20 K3 3.52 in 2.74 in 2.04 in 2.30 lb 1 

6232D 095456062320 Boxed 3B 5/8 0.125 in 0.625 in 5/8-16 K3 3.81 in 2.84 in 2.29 in 2.28 lb 1 

6255D 095456062559 Boxed 7BA 3/8 0.04 in 0.250 in 3/8-24 K7 2.23 in 1.74 in 1.33 in 0.44 lb 1 




Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 

1246

P L A I N B E A R I N G C H U C K S 

Thread Mounted - Medium Duty Model 








■■Models 0 and 1A are Smooth Sleeve. 

■■All Model 33 Plain Bearing Chucks are Hammer Capable. 

Cat. No. UPC No. Packaging Model No. 

Min. 

Capacity 

Max. 








31090 095456310902 Boxed 41BA 1/2 0.040 in 0.375 in 1/2-20 K30 2.50 in 2.05 in 1.43 in 0.60 lb 1 

32282C 095456322820 Boxed 41BA 3/8 0.040 in 0.375 in 3/8-24 K30 2.50 in 2.05 in 1.43 in 0.60 lb 1 

31138 095456311381 Boxed 41BA 3/8 - S 0.040 in 0.375 in 3/8-24 K30 2.50 in 2.05 in 1.43 in 0.62 lb 1 

Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 

Thread Mounted - Light Duty Model 

17 

■■Industrial Quality 

■■Through-Hardened Jaws Provide Hard, Durable Gripping Forces 


Min. 

Capacity 

Max. 


14946 095456149465 Boxed 24BA-3/8 0.063 in 0.50 in 3/8-24 KK 3.00 in 2.30 in 1.72 in 0.96 lb 1 

14947 095456149472 Boxed 26BA-1/2 0.063 in 0.50 in 1/2-20 KK 3.00 in 2.30 in 1.72 in 0.94 lb 1 

Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 


1247

I N D U S T R I A L K E Y L E S S C H U C K S 

High Precision Model Taper Mounted 

■■Precision Tested and Certified to 0.0016" T.I.R Max at Half 

Capacity 

■■Self-Tightening Feature Automatically Increases Gripping Force 

Proportional to Increased Torque to Prevent Tool Shank Slippage 

■■All Components Exposed to Wear are Completely Hardened to 

Maintain Accuracy and Extend Chuck Life 

■■Jacobs® Taper Mount Permits Use on a Wide Range of High 

Accuracy Drill Presses, Jig Borers, Milling Machines and 

Production Drilling Equipment 

■■2Js Mount is a Short Taper 


Min. 

Capacity 

Max. 

Capacity Mount 

Closed 

Length 

Open 

Length Sleeve Dia. 

Product 

Weight 

Shelf Pack 

Qty. 

31121D 095456311213 Boxed JKP 65-J1 0.012 in 0.255 in 1JT 2.76 in 2.44 in 1.28 in 0.69 lb 1 

9679 095456096790 Boxed JKP 80-J2S 0.012 in 0.315 in 2JS 2.91 in 2.64 in 1.46 in 0.98 lb 1 

9681 095456096813 Boxed JKP 100-J2 0.020 in 0.394 in 2JT 3.50 in 3.19 in 1.61 in 0.57 lb 1 






High Torque/High Precision Model 


■■Precision Tested and Certified to .0016" T.I.R. Maximum at Half 

Capacity 

■■For Use on CNC Machining Centers in Drilling, Boring, Counter- 

Boring and Milling Operations Requiring Heavy Penetration 

■■Furnished with Spanner Wrench to Allow the Application of 

Supplementary Gripping Torque. Light Tightening Increases 

Gripping Torque Up to 3 Times Higher Than Hand Tightening 

■■Resists Tool Loosening on High-Speed Machines with Right 

Hand Rotation and Instant Spindle Stop. 

■■2Js Mount is a Short Taper 


Min. 

Capacity 

Max. 


Closed 

Length 

Open 


Product 

Weight 

Shelf Pack 

Qty. 

30533 095456305335 Boxed JKT 100-J2 0.000 in 0.394 in 2JT 3.50 in 3.19 in 1.61 in 2.03 lb 1 

30532D 095456305328 Boxed JKT 100-J33 0.000 in 0.394 in 33JT 3.50 in 3.19 in 1.61 in 1.76 lb 1 




31122D 095456311220 Boxed JKT65-J1 0.000 in 0.255 in 1JT 2.76 in 2.44 in 1.28 in 1.20 lb 1 

30526D 095456305267 Boxed JKT80-J2S 0.000 in 0.315 in 2JS 2.91 in 2.64 in 1.46 in 1.50 lb 1 

30530D 095456305304 Boxed JKT160-J6 0.118 in 0.630 in 6JT 4.21 in 3.74 in 2.17 in 0.00 lb 1 

1248

I N D U S T R I A L K E Y L E S S C H U C K S 

High Torque/High Precision Chucks with Integrated Shank 

■■High Precision Keyless Drill Chuck - Arbor is Integrated Into the 

Internal Socket of the Drill Chuck 

■■This Integrated Design Makes It Impossible for the Arbor and 

the Drill Chuck to Become Accidently Separated, Providing a 

Unit of Greater Rigidity and Precision As a Result of Its Compact 

Design, Accumulated Run-Out is Reduced to a Minimum 

■■Self-Tightening Feature Automatically Increases Gripping 

Force Proportional to Increased Torque to Prevent Tool Shank 

Slippage. Right Handed Operation Only 

■■100% Individually Controlled to Ensure Not to Exceed a 

Maximum Total Integrated Run-Out of 0.0016 in 

■■Mounts Available: Morse Tapers, Straight Shanks and R-8 


Min. 

Capacity 

Max. 


Closed 

Length 

Open 


Product 

Weight 

Shelf Pack 

Qty. 

31406D 095456314061 Boxed JK 80-MT2 0.000 in 0.315 in MT2 2.83 in 2.56 in 1.50 in 1.35 lb 1 



31409 095456314092 Boxed JK 130-MT3 0.039 in 0.512 in MT3 3.62 in 3.15 in 1.89 in 2.47 lb 1 


31411 095456314115 Boxed JK 130-R8 0.039 in 0.512 in R8 3.54 in 3.23 in 1.89 in 3.20 lb 1 



31416 095456314160 Boxed JK 160-R8 0.118 in 0.630 in R8 3.78 in 3.35 in 2.13 in 3.79 lb 1 

Medium Duty Industrial Chucks 

■■Drill Chucks for Industrial Use (Medium Duty), Available with 

Threaded Mounts for Professional Portable Drilling Machines 

and with Taper Fittings for Stationary Drilling Machines 

■■Automatic Fitting for Efficient, Fast Change of Tools 

■■Self-Tightening Mechanism Automatically Increases the Grip in 

Proportion to the Increase in Torque During Drilling 

■■Fits Tools of Up to 20mm in Diameter. 

■■Machine Fitting Via DIN0238 of Jacobs Tapers and UNF Thread 

Fittings 


Min. 

Capacity 

Max. 


Closed 

Length 

Open 


Product 

Weight 

Shelf Pack 

Qty. 

33363D 095456333635 Boxed JK 130 1/2 0.039 in 0.512 in 1/2-20 3.74 in 3.39 in 1.73 in 1.58 lb 1 

33362 095456333628 Boxed JK 130 3/8 0.039 in 0.512 in 3/8-24 3.74 in 3.39 in 1.73 in 1.60 lb 1 

33365 095456333659 Boxed JK 130 J2 0.039 in 0.512 in 2JT 3.74 in 3.39 in 1.73 in 1.16 lb 1 



17 


1249

D I E G R I N D E R C H U C K S 

Die Grinder Chucks 

■■Compact Tap Chuck Designed for Use with Rubber-Flex® 

Collets Holds Mounted Grinding Burrs and Rotary Files on 

Pneumatic and Electric Die Grinders 

■■Compact Design Facilitates Use for a Wide Range of 

Applications 

■■Integral Seal Protects Collet Components From Abrasives and 

Swarf 

■■Rubber-Flex® Collets (See Rubber-Flex® Information) 

Furnished Separately for Tools with Collet Seating Cones 

Built Into Spindles. 

Cat. No. UPC No. Packaging Model No. Product Weight Shelf Pack Qty. 

9756 095456097568 Boxed 100-61 0.09 lb 1 

Nut for Die Grinder Chuck 


12791 095456127913 Boxed Nut for Die Grinder Chuck, Model No. 100-61 N100 0.02 lb 1 

Tap Chuck Collets 


■■Parallel Jaw Insert Surfaces Exert Uniform, Accurate Gripping 

Force Up to Three Times Greater Than Can Be Achieved with 

Split-Steel Collets 

■■Each Collet Accepts and Precisely Centers a Wide Range of 

Both Decimal or Metric Diameters (Within Individual Capacity 

Ranges) to Speed Setups and Increase Machining Productivity 

■■Durable One-Piece Construction. Synthetic Rubber Retains 

Flexibility and Resists Deterioration From Heat, Coolants and 

Cutting Compounds 

■■Steel Jaw Inserts Precision Ground After Molding Process to 

Ensure Maximum Gripping Accuracy. Hardened for Greater Wear 

Resistance Than Split Steel Collets 

■■Each Collet Bore is Held Concentric to the O.D. Tapers, Front 

and Back, to Minimize T.I.R. 

■■Automatically Seals Tool O.D. to Prevent Coolant Flow Through 

Thus Increasing Tool Wear 

■■Seals Collets and Machine Spindles to Protect From Abrasive 

Particles and Swarf 


Min. 

Capacity 

Max. 

Capacity 

Contact 

Length 

Cone 

Angle 

Outside 

Diameter 

No. of 

Inserts 

Product 

Weight 

Shelf Pack 

Qty. 

9747 095456097476 Boxed J420 0.176 in 0.320 in 0.500 in 40 ° 0.941 in 6 0.02 lb 1 





9750D 095456097506 Boxed J441 0.176 in 0.383 in 0.630 in 45 ° 1.296 in 6 0.04 lb 1 


1250

R U B B E R - F L E X ® C O L L E T S 

Die Grinder Collets 


Min. 

Capacity 

Max. 

Capacity 

Contact 

Length 

Cone 

Angle 

Outside 

Diameter 



No. of 

Inserts 

Product 

Weight 

Shelf Pack 

Qty. 

Lathe Chuck Collets 

■■Parallel Jaw Insert Surfaces Exert Uniform, Accurate Gripping 

Force Up to Three Times Greater Than Can Be Achieved with 

Split-Steel Collets 

■■Each Collet Accepts and Precisely Centers a Wide Range of 

Both Decimal or Metric Diameters (Within the Collet Capacity 

Range) to Speed Setups and Increase Machining Productivity 

■■Durable One-Piece Construction. Synthetic Rubber Retains 

Flexibility and Resists Deterioration From Heat, Coolants and 

Cutting Compounds 

■■Steel Jaw Inserts Precision Ground After Molding Process to 

Ensure Maximum Gripping Accuracy. Hardened for Greater 

Wear Resistance Than Split Steel Collets 

■■Each Collet Bore is Held Concentric to the O.D. Tapers, Front 

and Back, to Minimize T.I.R. 

■■Automatically Seals Tool O.D. to Prevent Coolant Flow Through 

Thus Increasing Tool Wear 

■■Seals Collets and Machine Spindles to Protect From Abrasive 

Particles and Swarf 


Model 

No. 

Min. 

Capacity 

Max. 

Capacity 

Contact 

Length 

Cone 

Angle 

Outside 

Diameter 

Clearance 

Diameter 

No. of 

Inserts 

Product 

Weight 

Shelf 

Pack Qty. 

9555D 095456095557 Bagged J910 0.060 in 0.125 in 1.74 in 26 ° 2.25 in 0.6 4 0.44 lb 1 

9556D 095456095564 Bagged J911 0.125 in 0.250 in 1.74 in 26 ° 2.25 in 0.6 6 0.54 lb 1 

9557DD 095456095571 Bagged J912 0.250 in 0.375 in 1.74 in 26 ° 2.25 in 0.6 6 0.52 lb 1 

9558D 095456095588 Bagged J913 0.375 in 0.500 in 1.74 in 26 ° 2.25 in - 8 0.44 lb 1 



9561 095456095618 Bagged J916 0.750 in 0.875 in 1.74 in 26 ° 2.25 in - 12 0.48 lb 1 






17 


1251

A R B O R S 

Morse Taper Jacobs® Taper Arbor 

■■Adapt Jacobs® Taper To: Morse Tapers, Straight Shanks, 

Threaded Shanks and Bridgeport® Tapers 

■■Ideal for Use with Custom Tool and Work Holder Designs and for 

Specialized Machining Applications 


Cat. No. UPC No. Packaging AO No. Mount Overall Length Product Weight Shelf Pack Qty. 

7299 095456072992 Boxed AO101 1 Morse X 1JT 3.38 in 0.12 lb 1 

7300 095456073005 Boxed AO102 1 Morse x 2 JT 3.59 in 0.16 lb 1 

7303 095456073036 Boxed AO106 1 Morse x 6JT 3.72 in 0.22 lb 1 




7308D 095456073081 Boxed AO203 2 Morse x 3JT 4.50 in 0.46 lb 1 















7324D 095456073241 Boxed AO406 4 Morse x 6JT 6.03 in 1.37 lb 





1252

A R B O R S 

Straight Shank To Jacobs® Taper 

■■Precision Machined and Ground to Master Gages for Maximum 

Performance with Jacobs® Drill and Tap Chucks 



Cat. No. UPC No. Packaging AO No. Mount Overall Length 

Straight Shank 

Length (L-1) Product Weight Shelf Pack Qty. 

7348D 095456073487 Boxed A4000 1/2" x 0JT 3.094 in 2.500 0.13 lb 1 

7349 095456073494 Boxed A4001 1/2" x 1JT 3.312 in 2.500 0.13 lb 1 














7367 095456073678 Boxed A4303 1" x 3JT 4.375 in 3.000 0.68 lb 1 

7368 095456073685 Boxed A4306 1" x 6JT 4.156 in 3.000 0.68 lb 1 

17 

Threaded Shank To Morse Taper 





Cat. No. UPC No. Packaging AO No. Mount Overall Length 

Threaded 

Extension (L-1) Product Weight Shelf Pack Qty. 

7345D 095456073456 Boxed A0261 2 Morse 3/8" - 24 3.69 in 0.56 0.28 lb 1 




1253

A R B O R S 

Bridgeport® Taper to Jacobs® Taper 



Cat. No. UPC No. Packaging AO No. Mount 

Overall 

Length 

Min 

Overall 

Length 

Max 

Mount 

Length 

(C) Min 

Mount 

Length 

(C) Max 

Diameter 

(D) Min 

Diameter 

(D) Max 

7339 095456073395 Boxed AO802 2JT 5.18 in 5.20 in 0.91 in 0.92 in 0.49 in 0.56 in 1.00 lb 1 

7340D 095456073401 Boxed AO803 3JT 5.53 in 5.55 in 1.25 in 1.27 in 0.75 in 0.81 in 1.10 lb 1 


7342D 095456073425 Boxed AO806 6JT 5.31 in 5.33 in 1.03 in 1.05 in 0.62 in 0.68 in 1.02 lb 1 


Product 

Weight 

Shelf 

Pack Qty. 

Drill Sleeves - Morse Taper - Archer® Series 600 

■■Adapt Smaller Morse Taper Shank Tools to Larger Machine 

Spindles 

■■Oil Toughened and Externally Precision Ground with Hardened 

Tang 

■■Outside Morse Taper Sizes are 1 Through 6; Inside Morse Taper 

Sizes are 0 Through 5 



Morse Taper No. 

Outside 

Morse Taper No. 

Inside Overall Length Product Weight Shelf Pack Qty. 

30421D 095456304215 Boxed 610 1 0 3.125 in 0.10 lb 1 

30422D 095456304222 Boxed 621 2 1 3.62 in 0.20 lb 1 

30424 095456304246 Boxed 631 3 1 3.88 in 0.37 lb 1 

30423D 095456304239 Boxed 632 3 2 4.38 in 0.42 lb 1 

30427D 095456304277 Boxed 641 4 1 4.88 in 1.06 lb 1 

30426D 095456304260 Boxed 642 4 2 4.88 in 0.87 lb 1 

30425D 095456304253 Boxed 643 4 3 5.50 in 0.90 lb 1 

30638 095456306387 Boxed 651 5 1 6.12 in 3.28 lb 1 

30430D 095456304307 Boxed 652 5 2 6.12 in 2.87 lb 1 

30429D 095456304291 Boxed 653 5 3 6.12 in 2.56 lb 1 

30428D 095456304284 Boxed 654 5 4 6.69 in 2.24 lb 1 

30639 095456306394 Boxed 664 6 4 8.56 in 5.50 lb 1 

30431D 095456304314 Boxed 665 6 5 8.56 in 5.62 lb 1 

1254

S L E E V E S , S O C K E T S & D R I V E S 

Extension Sockets - Morse Taper - Archer® Series 800 

■■Extend Tool Lengths and Application Distances While Adapting 

for Increases or Decreases in Applied Tool Morse Taper Sizes 

■■Externally Precision Ground with Hardened Tang 

■■Outside and Inside Morse Taper Sizes are 1 Through 5 


Morse Taper 

No. Outside 

Morse Taper 

No. Inside 

Overall 

Length 

Outside 

Diameter 

Socket 

Length (A) 

30443D 095456304437 Boxed 811 1 1 5.71 in 0.79 in 2.99 in 0.40 lb 1 

30444 095456304444 Boxed 812 1 2 6.30 in 1.18 in 3.58 in 0.92 lb 1 















Product 

Weight 

Shelf Pack 

Qty. 

17 

Ejecting Drifts 

■■Hardened and Tempered 

■■Eject Morse Taper Sizes 0 Through 6 From Sleeves, Sockets and 

Machine Spindles 

Cat. No. UPC No. Packaging Model No. Application Product Weight Shelf Pack Qty. 

30484 095456304840 Boxed 900 For ejection of No. 0 Morse Taper 0.08 lb 1 

30485 095456304857 Boxed 902 For ejection of Nos. 1 & 2 Morse Tapers 0.18 lb 1 

30486 095456304864 Boxed 903 For ejection of Nos. 3 & 4 Morse Tapers 0.37 lb 1 

30487D 095456304871 Boxed 904 For ejection of Nos. 4 & 5 Morse Tapers 0.75 lb 1 

30488D 095456304888 Boxed 906 For ejection of No. 6 Morse Taper 1.45 lb 1 

30489D 095456304895 Boxed 914 For ejection of Nos. 4 & 5 0.63 lb 1 


1255

S L E E V E S , S O C K E T S & D R I V E S 

Hand-Tite® Keyless Drill Chucks 

■■Split Bite Jaw: Increases Grip Over Standard Bite Chucks By 

Providing More Contact with the Bit 

■■Superior Gripping Force: Provides High Mechanical Advantage 

to Convert Hand Tightening Torque Into Superior Bit Gripping 

Force 

■■Hammerlock® Mechanism: Positive Locking Mechanism 

Prevents Loosening in Hammer and Other High Vibration 

Applications 

■■Anti-Lock Nut: Prevents Chuck From Locking Open 

■■Versatility: Models Available to Fit All 10mm (3/8") and 13mm 

(1/2") Variable Speed Corded and Cordless Portable Drills 

■■Precision Operation: Meet or Exceed Stringent DIN Run-Out and 

Dimensional Specifications 

■■Ergonomic Design: Material and Surface Finish Combinations 

Result in Increased Comfort and Performance 

■■Rugged Construction: Constructed of High Performance Material 

to Maximize Durability and Performance 


Min. 

Capacity 

Max. 


Closed 


Product 

Weight 

Shelf Pack 

Qty. 

30354 095456303546 Boxed 510-2H 0.040 in 0.375 in 3/8-24 2.00 in 1.68 in 0.50 lb 1 

31037D 095456310377 Boxed 513-2M 0.062 in 0.500 in 3/8-24 2.9 in 1.68 in 0.63 lb 1 

31038D 095456310384 Boxed 513-2M 0.062 in 0.500 in 1/2-20 2.9 in 1.68 in 0.70 lb 1 

Professional Duty Chucks 


■■Industrial Quality 

■■Through-Hardened Jaws Provide Hard, Durable Gripping 

Surfaces 



■■Fluted Sleeve Finish 



Min. 

Capacity 

Max. 


Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 

31052D 095456310520 Boxed 26BA-1/2 0.063 in 0.5 in 1/2-20 KK 3 in 2.3 in 1.72 in 1.38 lb 1 

30246D 095456302464 Boxed 41BA-3/8 0.063 in 0.375 in 3/8-24 K30 2.42 in 1.89 in 1.42 in 0.31 lb 1 

Multi-Craft® Drill Chuck 

■■Offered in 1/4", 3/8" and 1/2" Capacities 

■■Through-Hardened Jaws for Hard, Wear Resistant Gripping 

Surfaces 


Min. 

Capacity 

Max. 


Closed 

Length 

Open 


Product 

Weight 

Shelf Pack 

Qty. 

30243D 095456302433 Boxed 0.028 in 0.25 in 3/8-24 KG1 2.02 in 1.575 in 1.13 in 0.30 lb 1 

30247D 095456302471 Boxed 0.062 in 0.375 in 3/8-24 KG1 2.312 in 1.85 in 1.22 in 0.70 lb 1 

30598 095456305984 Boxed 0.078 in 0.5 in 3/8-24 KK 2.855 in 2.25 in 1.61 in 0.65 lb 1 

30602 095456306028 Boxed 0.078 in 0.5 in 1/2-20 KK 2.855 in 2.25 in 1.61 in 0.16 lb 1 

1256

K E Y E D C H U C K S 

Replacement Parts 

Cat. No. UPC No. Packaging Description Chuck Series No. Product Weight Shelf Pack Qty. 

4944 095456049444 Boxed Replacement Sleeve for 3 Series Chuck 3 0.54 lb 1 

5016D 095456050167 Boxed Replacement Sleeve for 33 Series Chuck 33 0.25 lb 1 

5046 095456050464 Boxed Replacement Sleeve for 34 Series Chuck 34 0.42 lb 1 

095456050662 Boxed Replacement Sleeve for 36 Series Chuck 36 0.65 lb 1 

7417D 095456074170 Boxed Replacement Jaw and Nut Unit for 3 Series Chuck 3 0.53 lb 1 

7423 095456074231 Boxed Replacement Jaw and Nut Unit for 33 Series Chuck 33 0.55 lb 1 

7424D 095456074248 Boxed Replacement Jaw and Nut Unit for 34 Series Chuck 34 0.53 lb 1 

7425 095456074255 Boxed Replacement Jaw and Nut Unit for 36 Series Chuck 36 0.58 lb 1 

Adapt-A-Drive® Chuck 

■■Easy Conversion-Integral Hex Mount Locks the Adapt-A-Drive 

Chuck Into the Screwdriver Bit Socket 

■■Ideal for Use in Starting Screw Holes for Use in Hard-To-Reach 

Spaces 

Cat. No. UPC No. Packaging Min. Capacity Max. Capacity Mount Key No. Sleeve Dia. 

30248D 095456302488 Boxed 0.028 in 0.25 in 0.250" Hex KG1 1.13 in 0.45 lb 1 

Product 

Weight 

Shelf Pack 

Qty. 

17 

Stainless Steel Chucks 

■■For Special Applications on Either Portable Air Operated or 

Stationary Machine Tools 

■■Resist Chemical Corrosion and Reduce Potential for Hazardous 

Sparking 


Model 

No. 

Min. 

Capacity 

Max. 


6625 095456066250 Boxed 0BM 0.028 in 0.156 in 5/16-24 K0M 1.53 in 1.17 in 0.85 in 0.20 lb 1 

6624 095456066243 Boxed 0M 0.028 in 0.156 in 0JT K0M 1.45 in 1.1 in 0.85 in 0.20 lb 1 

6627D 095456066274 Boxed 1BM 0.028 in 0.25 in 5/16-24 K1M 1.95 in 1.57 in 1.12 in 0.32 lb 1 

6628 095456066281 Boxed 1BM 0.028 in 0.25 in 3/8-24 K1M 1.95 in 1.57 in 1.12 in 0.32 lb 1 

6626 095456066267 Boxed 1M 0.028 in 0.25 in 1JT K1M 1.92 in 1.54 in 1.12 in 0.32 lb 1 

Closed 

Length 

Open 

Length 

Sleeve 

Dia. 

Product 

Weight 

Shelf 

Pack Qty. 


1257

S P E C I A L P U R P O S E C H U C K S 

Drain Chuck 

■■Specifically Designed for Use with Flexible Coil Spring Tools. 

Allows Coil Spring to Pass Through Chuck 

■■Idea for Soil Pipe and Sewer Cleaning Tools 


Model 

No. 

Min. 

Capacity 

Max. 


30726 095456307261 Boxed DC4595 0.25 in 0.5 in 13/16-20 -- 2.49 in 1.7 in 2.49 in 0.28 lb 1 

Open 

Length 

Sleeve 

Dia. 

Closed 

Length 

Product 

Weight 

Shelf 

Pack Qty. 

Chuck Keys 

■■Nickel Thumb Grip Styles Increase Leverage and User Comfort 

■■Soft Steel Handles Limit the Potential for Dangerous Fracturing 

Under Excessive Load 

■■Self-Ejecting Models with Spring-Loaded Ejectors Ensure Key 

Disengagement After Tightening 

■■Never Apply Extensions, Pliers, Wrenches or 'Cheaters' of Any 

Kind to Chuck Key Handles 

■■Do Not Subject Chuck Key Handles to Hammer or Other Impact 

Blows 


Cat. No. UPC No. Packaging Model No. Pilot Size Used On Handle Style No. Teeth 

30827D 095456308275 Bagged - 13/64 in 1/4 & 3/8" chucks T-handle 11 0.07 lb 1 

3637 095456036376 Bagged K0 1/8 in 0 Series T-handle 11 0.04 lb 1 

3639 095456036390 Bagged K0M 1/8 in 0 Series Stainless T-handle 11 0.05 lb 1 

3641 095456036413 Bagged K1 5/32 in 1 Series T-handle 11 0.04 lb 1 

3643 095456036437 Bagged K1M 5/32 in 1 Series Stainless T-handle 11 0.60 lb 1 

3649D 095456036499 Bagged K2 1/4 in 2 Series Thumb Handle 11 0.13 lb 1 

3651D 095456036512 Bagged K3 5/16 in 3, 34 Series & 14N Thumb Handle 11 0.55 lb 1 

3653 095456036536 Bagged K3C 5/16 in 34-33 C Thumb Handle 11 0.00 lb 1 

3655DD 095456036550 Bagged K4 3/8 in 36. 16, 18N Thumb Handle 12 0.34 lb 1 

3657 095456036574 Bagged K5 7/16 in 20N T-handle 12 0.68 lb 1 

3659D 095456036598 Bagged K7 7/32 in 7 Series Thumb Handle 11 0.06 lb 1 

3664 095456036642 Bagged K30 15/64 in 31 Series & 8-1/2N Thumb Handle 10 0.15 lb 1 

3666 095456036666 Bagged K32 1/4 in 32,33 Series& 11N Thumb Handle 10 0.55 lb 1 

14273D 095456142732 Bagged KG1 1/4 in 

1/4 & 3/8’ Multi-Craft® 

(black handle) 

Product 

Weight 

Shelf Pack 

Qty. 

T-handle 11 0.04 lb 1 

3605 095456036055 Bagged KGA 1/4 in 1/4 & 3/8" Multi-Craft® L-handle 11 0.00 lb 1 

30052D 095456300521 Bagged KK 9/32 in 

DC8, SM8, 74K, 22BA, 

23BA, 24BA, 26BA, 29-33, 

T-handle 10 0.10 lb 1 

1258

C H U C K A C C E S S O R I E S 

Self-Ejecting Keys 

■■Nickel Thumb Grip Styles Increase Leverage and User Comfort 

■■Soft Steel Handles Limit the Potential for Dangerous Fracturing 

Under Excessive Load 

■■Self-Ejecting Models with Spring-Loaded Ejectors Ensure Key 

Disengagement After Tightening 

■■Never Apply Extensions, Pliers, Wrenches or 'Cheaters' of Any 

Kind to Chuck Key Handles 

■■Do Not Subject Chuck Key Handles to Hammer or Other Impact 

Blows 

Cat. No. UPC No. Packaging Model No. Pilot Size Used On No. Teeth Product Weight Shelf Pack Qty. 

2948D 095456029484 Bagged S-K3C 5/16 in 3, 34 Series & 14N 11 0.20 lb 1 

3157D 095456031579 Bagged S-KK 9/32 in 

DC8, SM8, 74K, 22BA, 

23BA, 24BA, 26BA 

10 0.00 lb 1 

Wedge Sets 

■■For Removing Taper Mount Chucks 

Cat. No. UPC No. Packaging Model No. Used On Product Weight Shelf Pack Qty. 

13266 095456132665 Bagged #1 WEDGE SET 1JT 0.05 lb 1 




17 

Key Leashes 

Cat. No. UPC No. Packaging Model No. Used On Product Weight Shelf Pack Qty. 

3685D 095456036857 Bagged Model A K0, K1, K7, KG 0.02 lb 1 

3686D 095456036864 Bagged Model B K30, K32, K2, KK 0.02 lb 1 


1259

T E C H N I C A L I N F O R M A T I O N 

Technical Information 

Jacobs® Tapers 

& MOUNTS 

The tables below reproduce and classify the normal dimensions of Jacobs® 

tapers and mounts. They also observe the generally accepted designation. 

In effect, the range of increasing values for diameter D contains two No. 2 

tapers, the first of which is No. 2 short taper. Between the tapers 2 and 3, 

there are two interpolated tapers which bear the out-of-series numbers 33 

and 6 respectively. 

D d I 1 Taper on Diameter 

Jacobs Taper No. IN MM IN MM IN MM IN MM 

0 0.2500 6.350 0.2284 5.802 0.43750 11.112 0.59145 15.023 

1 0.3840 9.754 0.3334 8.469 0.56525 16.669 0.92508 23.497 

2 short 0.5488 13.940 0.4876 12.386 0.75000 19.050 0.97861 24.857 

2 0.5590 14.199 0.4876 12.386 0.87500 22.225 0.97861 24.857 

33 0.6240 15.850 0.5605 14.237 1.00000 25.400 0.76194 19.353 

6 0.6760 17.170 0.6241 15.852 1.00000 25.400 0.62292 15.822 

3 0.8110 20.599 0.7461 18.951 1.21758 30.956 0.63898 16.230 

4 1.1240 28.550 1.0372 26.346 1.65625 42.069 0.62886 15.973 

5 1.4130 35.890 1.3161 33.422 1.87500 47.625 0.62010 15.773 


Jacobs® Standard Threaded Mounts 

Jacobs® Standard Straight Mount 

NOTE: All dimensions are in inches unless otherwise specified. 

CAUTION: When designing for new applications, contact the Engineering 

Department, The Jacobs® Chuck Manufacturing Company for current 

specifications. 

1260


Din Tapers 

DIN TAPER INTERHANGABILITY 

DIN tapered sections are identical with the following Morse tapers: 

No. 1, for tapers B10 and B12 



The length of each of these tapers is, or course, distinctly less than 

the overall length of the corresponding Morse taper. Each taper may 

be regarded as corresponding approximately either to that part of the 

Morse taper nearest the small end (for example: B10), or to the part 

nearest the large end (for example: B12). 

D D 1 * d* d 1 I 1 a(max.) 

Ref. Diameter No. IN MM IN MM IN MM IN MM IN MM IN MM 

B10 0.3974 10.094 0.4036 10.3 0.3689 9.4 25/64 9.8 0.571 14.5 0.125 3.5 

B12 0.4750 12.065 0.4812 12.2 0.4877 11.1 29/64 11.5 0.728 18.5 0.125 3.5 

B16 0.6194 15.733 0.6288 16.0 0.5722 14.5 19/32 15.0 0.945 24.0 0.188 5.0 

B18 0.7000 17.780 0.7094 18.0 0.6371 16.2 21/32 16.8 1.260 32.0 0.188 5.0 

B22 0.8580 21.793 0.8674 22.0 0.7780 19.8 13/16 20.5 1.594 40.5 0.188 5.0 

B24 0.9380 23.825 0.9474 24.1 0.8328 21.3 7/8 22.0 1.988 50.5 0.188 5.0 

b 

c 

Morse 

Taper on 

Ref. Diameter No. IN MM IN MM No. IN MM 

B10 0.125 3.5 0.047 1.0 1 0.04988 1.267 

B12 0.125 3.5 0.047 1.0 1 0.04988 1.267 

B16 0.156 4.0 0.063 1.5 2 0.04995 1.269 

B18 0.156 4.0 0.063 1.5 2 0.04995 1.269 

B22 0.188 4.5 0.078 2.0 3 0.05020 1.275 

B24 0.188 4.5 0.078 2.0 3 0.05020 1.275 

17 

NOTES: 

* D1 and d = calculated values given for information. 

The effective values are obtained by applying the rate of taper 

and the basic dimension D to the actual values of a and I1, 

respectively. 


1261


Morse Tapers 

EXTERNAL TAPER WITH TANG: NOS. 1 TO 6 METRIC 

NOTE: All dimensions are in milimeters 

unless otherwise specified. 


Designation 

Basic 

Size Taper 1:20=0.05 

EXTERNAL TAPER 

INTERNAL TAPER 

Metric Taper Morse Taper Metric Taper 

4 6 1 2 3 4 5 6 80 100 120 160 200 

0.59858:12 

=1:20.047 

=0.04988 

0.59941:12 

=1:20.020 

=0.04995 

0.06235:12 

=1:19.922 

=0.05020 

0.62326:12 

=1:19.254 

=0.05194 

0.63151:12 

=1:19.002 

=0.05263 

0.62565:12 

=1:19.180 

=0.05214 1:20=0.05 

D 4 6 12.065 17.78 23.825 31.267 44.399 63.348 80 100 120 160 200 

a 2 3 3.5 5 5 6.5 6.5 8 8 10 12 16 20 

D 1 

(1) 4.1 6.2 12.2 18 24.1 31.6 44.7 63.8 80.4 100.5 120.6 160.8 201 

d (1) 2.9 4.4 9.4 14.6 19.8 25.9 37.6 53.9 70.2 88.4 106.6 143 179.4 

d 1 

(2) - - M6 M10 M12 M16 M20 M24 M30 M36 M36 M48 M48 

d 3 

max. - - 8.7 13.5 18.5 24.5 35.7 51 67 85 102 138 174 

d 2 

(1) - - 9 14 19.1 25.2 36.5 52.4 69 87 105 141 177 

d 4 

max. 2.5 4 9 14 19 25 35.7 51 67 85 102 138 174 

l 1 

max. 23 32 53.5 64 81 102.5 129.5 182 196 232 268 340 412 

l 2 

max. 25 35 57 69 86 109 136 190 204 242 280 356 432 

l 3 

max. - - 62 75 94 117.5 149.5 210 220 260 300 380 460 

l 4 

max. - - 65.5 80 99 124 156 218 228 270 312 396 480 

b h13 - - 5.2 6.3 7.9 11.9 15.9 19 26 32 38 50 62 

c (3) - - 8.5 10 13 16 19 27 24 28 32 40 48 

e max. - - 13.5 16 20 24 29 40 48 58 68 88 108 

I min. - - 16 24 28 32 40 50 65 80 80 100 100 

R max. - - 5 6 7 8 10 13 24 30 36 48 60 

R max. - - 1.2 1.6 2 2.5 3 4 5 5 6 8 10 

t max. 2 3 5 5 7 9 10 16 24 30 36 48 60 

d 5 

H11 3 4.6 9.7 14.9 20.2 26.5 38.2 54.6 71.5 90 108.5 145.5 182.5 

d 6 

- - 7 11.5 14 18 23 27 33 36 39 52 52 

l 5 

min. 25 34 56 67 84 107 135 188 202 240 276 350 424 

l 6 

21 29 52 62 78 98 125 177 186 220 254 321 388 

g A13 22 32 52 63 79 11.9 15.9 19 26 32 38 50 62 

h 8 12 19 22 27 32 33 47 52 60 70 90 110 

z (4) 0.5 0.5 1 1 1 1.5 1.5 2 2 2 2 3 3 

NOTES: 

1. D 1 

and d or d 2 

= approximate values given for guidance. The actual values result from the actual values 

of a and I 1 

or I 3 

respectively, taking into account the taper and the basic size D. 

2. It is allowed to increase the length c over which the tang is turned to diameter d 3 

, but without exceeding e. 

3. z = maximum permissible deviation, outwards of the position of the gauge plane D from the nominal 

position of coincidence with the leading face. 

1262


Morse Tapers 

EXTERNAL TAPER WITH TANG: NOS. 1 TO 6 

NOTE: All dimensions are in inches 

unless otherwise specified. 

Basic 

Size 

EXTERNAL TAPER 

INTERNAL TAPER 

Designation 

Taper 

Morse Taper 

1 2 3 4 5 6 

0.59858:12 

=1:20.047 

=0.04988 

0.59941:12 

=1:20.020 

=0.04995 

0.06235:12 

=1:19.922 

=0.05020 

0.62326:12 

=1:19.254 

=0.05194 

0.63151:12 

=1:19.002 

=0.05263 

0.62565:12 

=1:19.180 

=0.05214 

D 0.475 0.700 0.938 1.231 1.748 2.494 

a 1/8 3/16 3/16 1/4 1/4 5/16 

D 1 

(1) 0.4812 0.7094 0.9474 1.2440 1.7612 2.5103 

d (1) 0.3690 0.5720 0.7780 1.0200 1.4750 2.1160 

d 1 

(2) UNC 1/4 UNC 3/8 UNC 1/2 UNC 5/8 UNC 5/8 UNC 1 

d 2 

(1) 0.3534 0.5533 0.7529 0.9908 1.4388 2.0639 

d 3 

max. 11/32 17/32 23/32 31/32 1-13/32 2 

d 4 

max. 11/32 17/32 23/32 31/32 1-13/32 2 

l 1 

max. 2-1/8 2-9/16 3-3/16 4-1/16 5-3/16 7-1/4 

l 2 

max. 2-1/4 2-3/4 3-3/8 4-5/16 5-7/16 7-9/16 

l 3 

max. 2-7/16 2-15/16 3-11/16 4-5/8 5-7/8 8-1/4 

l 4 

max. 2-9/16 3-1/8 3-7/8 4-7/8 6-1/8 8-9/16 

b h12 0.2031 0.2500 0.3125 0.4687 0.6250 0.7500 

c (3) 11/32 13/32 17/32 5/8 3/4 1-1/16 

e max. 0.52 0.66 0.83 0.96 1.15 1.58 

I min. 1/2 3/4 1 1-1/4 1-1/4 2 

R max. 3/16 1/4 9/32 5/16 3/8 1/2 

r max. 3/64 1/16 5/64 3/32 1/8 5/32 

t max. 3/16 3/16 1/4 1/4 5/16 3/8 

d 5 

H11 0.378 0.588 0.797 1.044 1.502 2.150 

d 6 

9/32 7/16 9/16 11/16 11/16 1-1/8 

l 5 

min. 2-3/16 2-21/32 3-9/32 4-5/32 5-5/16 7-3/8 

l 6 

2-1/16 2-1/2 3-1/16 3-7/8 4-15/16 7 

g H12 0.223 0.270 0.333 0.493 0.650 0.780 

h 3/4 7/8 1-1/8 1-1/4 1-1/2 1-7/8 

z (4) 0.040 0.040 0.040 0.060 0.060 0.080 

17 


NOTES: 

1. D 1 

and d or d 2 

= approximate values given for guidance. The actual values result from the actual values 

of a and I 1 

or I 3 

respectively, taking into account the taper and the basic size D. 

2. It is allowed to increase the length c over which the tang is turned to diameter d 3 

, but without exceeding e. 

3. z = maximum permissible deviation, outwards of the position of the gauge plane D from the nominal 

position of coincidence with the leading face. 

1263

S E R V I C E A N D R E P A I R 

SERVICE AND REPAIR 

Mounting and Removing Chucks& 

MOUNTS 

ON THREADED SPINDLE PORTABLE TOOLS 

To mount chucks: 

Thread chuck on the spindle by hand so that the back of the chuck seats 

firmly against the mounting surface provided on the portable tool spindle. 

To remove chucks: 

Chucks with threaded mounts can be identified by the letters “B” or “BA” 

in the model number (1B, 41BA). “BA” model chucks may have a left hand 

thread retaining screw through the chuck body into the tool spindle. Remove 

retaining screw through the chuck jaw hole opening, turn screw clockwise 

and proceed as described for “B” model chucks. “B” model chucks may be 

removed from a threaded spindle by tightening the chuck jaws around a hex 

key and striking the key with a sharp blow in a counter-clockwise direction, 

using a wooden or rubber hammer (Illus. A). 

ON TAPERED SPINDLES 



Clean both tapers of all grease and grit. With the chuck jaws completely 

refracted into the chuck and using a thin piece of wood to protect the chuck 

nose, tap the chuck into place on the spindle. 


If a power tool has a tapered spindle, the chuck may be removed from the 

spindle by inserting chuck removal wedges between the chuck back and the 

spindle housing (Illus. B). 

ON TAPERED SHANK ARBORS 


Clean both tapers as above. With the jaws retracted into the chuck and 

with the chuck nose resting on a wooden bench, strike the tang of the 

arbor lightly to seat it into the chuck. Do NOT assemble on an arbor press 

as excessive pressure will expand the chuck body and distort the chuck 

jaw holes. 


Insert wedges between the back of the chuck and the shoulder of the arbor 

(Illus. C). In case the mounting taper of the arbor does not provide a shoulder, 

a cross hole should be drilled through the neck of the arbor (illus. D) 

and a cross pin inserted. Then the wedges can be used between the chuck 

back and the cross pin. If desired, a hole may be drilled through the soft 

center portion of the chuck body (Illus. D), and a pin may then be used with 

an arbor press to force the arbor out of the chuck. 

1264

S E R V I C E A N D R E P A I R 

Repair Instructions 

DISASSEMBLY 

Plain Bearing Chucks: 

Extend the jaws to half capacity, press the sleeve off over front (jaw end) 

of body, remove the nut halves (Illus. E). 

Ball Bearing Chucks: 

Extend the jaws to half capacity, press the sleeve off over front (jaw end) 

of body, remove the nut halves, jaws, bearing race, and thrust washer (Illus. E). 

ASSEMBLY 

CAUTION: Each of the three jaws differ slightly from the other by the location 

of the threaded portion (Illus. G). In order to ensure proper operation, they must 

be re-installed in the proper sequence. 

Plain Bearing Chucks: 

Refer to Illus. G and insert the jaws in the correct sequence when viewing the 

chuck from the body nose diameter. insert No. 1 jaw (with small step) first, then 

No. 2 jaw (with largest step) in the clockwise position, then No. 3 jaw (without 

a step) should be inserted. 

Turn chuck jaws to closed position and check to ensure that all three jaws are 

properly aligned. The height of all three jaws should be uniform. 

A good grade of grease should be applied to the jaw and nut threads, then the 

nut halves should be closed around the jaws. Extend jaws to half capacity. 

Press on the sleeve with an arbor press (Illus. F). 

17 

Ball Bearing Chucks: 

Slip the thrust race over jaw end of the body until it contacts the rear flange. 

Slip the caged bearing over jaw end of the body until it contacts the thrust race. 

Follow Plain Bearing jaw assembly and nut procedure. 


1265

D E C I M A L E Q U I V A L E N T C H A R T 

DECIMAL EQUIVALENT CHART 

Drill 

Size 

Decimal 

Inches 

Drill 

Size 

Decimal 

Inches 

Drill 

Size 

Decimal 

Inches 

Drill 

Size 

Decimal 

Inches 

Drill 

Size 

Decimal 

Inches 

Drill 

Size 

Decimal 

Inches 

0.30mm 0.0118 

1.45mm 0.0571 

3.30mm 0.1299 

5.80mm 0.2283 

9.00mm 0.3543 

5/8 0.6250 

0.32mm 0.0126 

1.50mm 0.0591 

3.40mm 0.1339 

5.90mm 0.2323 

T 0.3580 

16.00mm 0.6299 

80 0.0135 

53 0.0595 

29 0.1360 

A 0.2340 

9.10mm 0.3583 

16.25mm 0.6398 

0.35mm 0.0138 

1.55mm 0.0610 

3.50mm 0.1378 

15/64 0.2344 

23/64 0.3594 

41/64 0.6406 

79 0.0145 

1/16 0.0625 

28 0.1405 

6.00mm 0.2362 

9.20mm 0.3622 

16.50mm 0.6496 

0.38mm 0.0150 

1.60mm 0.0630 

9/64 0.1406 

B 0.2380 

9.30mm 0.3661 

21/32 0.6562 

1/64 0.0156 

52 0.0635 

3.60mm 0.1411 

6.10mm 0.2402 

U 0.3680 

16.75mm 0.6594 


0.40mm 0.0157 

78 0.0160 

0.42mm 0.0165 

0.45mm 0.0177 

77 0.0180 

0.48mm 0.0189 

0.50mm 0.0197 

76 0.0200 

75 0.0210 

0.55mm 0.0211 

74 0.0225 

0.60mm 0.0236 

73 0.0240 

0.62mm 0.0244 

72 0.0250 

0.65mm 0.0256 

71 0.0260 

0.70mm 0.0276 

70 0.0280 

69 0.0292 

0.75mm 0.0295 

68 0.0310 

1/32 0.0312 

0.80mm 0.0315 

67 0.0320 

66 0.0330 

0.85mm 0.0335 

65 0.0350 

0.90mm 0.0354 

64 0.0360 

63 0.0370 

0.95mm 0.0374 

62 0.0380 

61 0.0390 

1.00mm 0.0394 

60 0.0400 

59 0.0410 

1.05mm 0.0413 

58 0.0420 

57 0.0430 

1.10mm 0.0433 

1.15mm 0.0453 

56 0.0465 

3/64 0.0469 

1.20mm 0.0472 

1.25mm 0.0492 

1.30mm 0.0512 

55 0.0520 

1.35mm 0.0531 

54 0.0550 

1.40mm 0.0551 

1.65mm 0.0650 

1.70mm 0.0669 

51 0.0670 

1.75mm 0.0689 

50 0.0700 

1.80mm 0.0709 

1.85mm 0.0728 

49 0.0730 

1.90mm 0.0748 

48 0.0760 

1.95mm 0.0768 

5/64 0.0781 

47 0.0785 

2.00mm 0.0787 

2.05mm 0.0807 

46 0.0810 

45 0.0820 

2.10mm 0.0827 

2.15mm 0.0846 

44 0.0860 

2.20mm 0.0866 

2.25mm 0.0886 

43 0.0890 

2.30mm 0.0906 

2.35mm 0.0925 

42 0.0935 

3/32 0.0938 

2.40mm 0.0945 

41 0.0960 

2.45mm 0.0965 

40 0.0980 

2.50mm 0.0984 

39 0.0995 

38 0.1015 

2.60mm 0.1024 

37 0.1040 

2.70mm 0.1063 

36 0.1065 

7/64 0.1094 

35 0.1100 

2.80mm 0.1102 

34 0.1110 

33 0.1130 

2.90mm 0.1142 

32 0.1160 

3.00mm 0.1181 

31 0.1200 

3.10mm 0.1220 

1/8 0.1250 

3.20mm 0.1260 

30 0.1285 

27 0.1440 

3.70mm 0.1457 

26 0.1417 

25 0.1495 

3.80mm 0.1496 

24 0.1520 

3.90mm 0.1535 

23 0.1540 

5/32 0.1562 

22 0.1570 

4.00mm 0.1575 

21 0.1590 

20 0.1610 

4.10mm 0.1614 

4.20mm 0.1654 

19 0.1660 

4.30mm 0.1693 

18 0.1695 

11/64 0.1719 

17 0.1730 

4.40mm 0.1732 

16 0.1770 

4.50mm 0.1772 

15 0.1800 

4.60mm 0.1811 

14 0.1820 

4.70 13 0.1850 

3/16 0.1875 

4.80 12 0.1890 

11 0.1910 

4.90mm 0.1929 

10 0.1935 

9 0.1960 

5.00mm 0.1969 

8 0.1990 

5.10mm 0.2008 

7 0.2010 

13/64 0.2031 

6 0.204 

5.20mm 0.2047 

5 0.2055 

5.30mm 0.2087 

4 0.2090 

5.40mm 0.2126 

3 0.2130 

5.50mm 0.2165 

7/32 0.2188 

5.60mm 0.2205 

2 0.2210 

5.70mm 0.2244 

1 0.2280 

C 0.2420 

6.20mm 0.2441 

D 0.2460 

6.30mm 0.2480 

1/4, E 0.2500 

6.40mm 0.2520 

6.50mm 0.2559 

F 0.2570 

6.60mm 0.2598 

G 0.2610 

6.70mm 0.2638 

17/64 0.2656 

H 0.2660 

6.80mm 0.2677 

6.90mm 0.2717 

I 0.2720 

7.00mm 0.2756 

J 0.2770 

7.10mm 0.2795 

K 0.2810 

9/32 0.2812 

7.20mm 0.2835 

7.30mm 0.2874 

L 0.2900 

7.40mm 0.2913 

M 0.2950 

7.50mm 0.2953 

19/64 0.2969 

7.60mm 0.2992 

N 0.3020 

7.70mm 0.3031 

7.80mm 0.3071 

7.90mm 0.3110 

5/16 0.3125 

8.00mm 0.3150 

O 0.3160 

8.10mm 0.3189 

8.20mm 0.3228 

P 0.3230 

8.30mm 0.3268 

21/64 0.3281 

8.40mm 0.3307 

Q 0.3320 

8.50mm 0.3346 

8.60mm 0.3386 

R 0.3390 

8.70mm 0.3425 

11/32 0.3438 

8.80mm 0.3465 

S 0.3480 

8.90mm 0.3504 

9.40mm 0.3701 

9.50mm 0.3740 

3/8 0.3750 

V 0.3770 

9.60mm 0.3780 

9.70mm 0.3819 

9.80mm 0.3858 

W 0.3860 

9.90mm 0.3898 

25/64 0.3906 

10.00mm 0.3937 

X 0.3970 

10.20mm 0.4016 

Y 0.4040 

13/32 0.4062 

Z 0.4130 

10.50mm 0.4134 

27/64 0.4219 

10.80mm 0.4252 

11.00mm 0.4331 

7/16 0.4375 

11.20mm 0.4409 

11.50mm 0.4528 

29/64 0.4531 

11.80mm 0.4646 

15/32 0.4688 

12.00mm 0.4724 

12.20mm 0.4803 

31/64 0.4844 

12.50mm 0.4921 

1/2 0.5000 

12.80mm 0.5039 

13.00mm 0.5118 

33/64 0.5156 

13.20mm 0.5197 

17/32 0.5312 

13.50mm 0.5315 

13.80mm 0.5433 

36/64 0.5469 

14.00mm 0.5512 

14.25mm 0.5610 

9/16 0.5625 

14.50mm 0.5709 

37/64 0.5781 

14.75mm 0.5807 

15.00mm 0.5906 

19/32 0.5938 

15.25mm 0.6004 

39/64 0.6094 

15.50mm 0.6102 

15.75mm 0.6201 

17.00mm 0.6693 

43/64 0.6719 

17.25mm 0.6791 

11/16 0.6875 

17.50mm 0.6890 

45/64 0.7031 

18.00mm 0.7087 

23/32 0.7188 

18.50mm 0.7283 

47/84 0.7344 

19.00mm 0.7480 

3/4 0.7500 

49/64 0.7656 

19.50mm 0.7677 

25/32 0.7812 

20.00mm 0.7874 

51/64 0.7969 

20.50mm 0.8071 

13/16 0.8125 

21.00mm 0.8268 

53/64 0.8281 

27/32 0.8438 

21.50mm 0.8465 

55/64 0.8594 

22.00mm 0.8661 

7/8 0.8750 

22.50mm 0.8858 

57/64 0.8906 

23.00mm 0.9055 

29/32 0.9062 

59/64 0.9219 

23.50mm 0.9252 

15/16 0.9375 

24.00mm 0.9449 

61/64 0.9531 

24.50mm 0.9646 

31/32 0.9688 

25.00mm 0.9843 

63/64 0.9844 

1" 1.0000 

1266

M A T E R I A L H A N D L I N G 

Chain Products.................................. 1272 

Chain Accessories............................. 1311 

Fittings............................................... 1335 

Blocks................................................ 1371 

Slings................................................. 1390 

Clamps............................................... 1404 

18 


1267


Campbell can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the 

Campbell ® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope 

and chain fittings, drop-forged chain hardware, high quality tackle blocks, shackles, hooks, and much more. 

Today, Campbell is the best-selling brand of welded and weldless chain in the United States. Users can select from a wide range of 

working load capacities, including proof coil, high test, transport, and alloy. Many finishes, styles, and materials are also available. 

Campbell chains and assemblies, including slings for overhead lifting, tie-downs, and binder chains, have earned the brand an 

outstanding reputation for quality. 

Innovation is also a key element of the Campbell philosophy. Grade 100 chain was pioneered 

and developed by Campbell, resulting in products that featured 25% higher working load 

limits, manufactured proof tests, and design strengths than Grade 80 chain products. 

This kind of innovation, combined with unparalleled technical support, expertise, and 

training, provides Campbell customers with a level of satisfaction unrivaled in the industry. 

ANCHOR 

SHACKLES 

Meets Federal Specification 

RR-C-271D, Type IV 

Statistically tested 

for hardness, tensile 

strength, impact 

resistance, ductility 

and fatigue 

Drop-forged for superior 

strength and performance 

6 to 1 design factor 

ISO 9001 compliant 

Bows, pins, and bolts 

galvanized to ASTM A-153 

Date Code, “WLL” (Working Load Limit), 

“Campbell” or “CC”, “USA” and size 

are permanently forged on shackle bow 

M A T E R I A L H A N D L I N G 18 

Pins and bolts made of alloy 

steel; through hardened by a 

quench and tempering process 

EXTRA-WIDE 

MASTER LINKS 

Accommodates heavy wire rope 

thimbles in multiple-leg slings 

Usable with Quik-Alloy ® coupling 

links for double leg slings 

Wider than standard 

chain master links 

Grade 100 

Chain Strength 

100% proof tested 

in accordance with 

ASTM A952 

5:1 Design Factor; 

meets or exceeds all 

ASME B30.26 

No deformation at proof test loads 

"USA", Date Code, and Link 

Number stamped on every link 

1268

C H A I N P R O D U C T S 

Camtrol System 

Campbell’s CAMTROL SYSTEM makes chain products easier to identify and understand. 

That’s because all are based on engineering formulas computed according to 

ISO (International Organization for Standardization), NACM (National Association of 

Chain Manufacturers) and ASTM (American Society for Testing and Materials). Use 

the CAMTROL SYSTEM to make wise chain purchasing decisions. Use it to compare 

the various categories of chain, to choose the right chain for the job according to the 

price per thousand pounds of working load instead of buying on a price per foot. 

Consult your Campbell Chain distributor for current prices. Then refer to the chart 

below and divide the price per foot by the working load limit (in thousands of 

pounds) shown in the table. 

By using this comparison system you will discover that you can buy a smaller, easier 

to handle chain, and at less cost based on its working load limit. 

Variations in finish or heat treatment 

The mechanical properties shown on the Camtrol Chart apply only to the various 

chains in their standard finish and heat treated condition. Finishes such as galvanizing 

or electroplating may reduce strengths. The manufacturer’s revised recommendations 

should be solicited when such treatments are desirable for specific 

applications. 

Hallmarking (Identification) 

All System 4, 7, 8, and 10 chains and all System 3 chains 5/16” (8 mm) and larger 

are marked with the grade identifier approximately every 12” or less. Please refer to 

the chain type of interest in this catalog for the specific hallmarks. 

Trade Size Diameter Inside Length Inside Width Weight Per 100 Feet Working Load Limit 

Grade 

Camtrol System 

Number 

in mm in mm in mm in mm lb kg lb kg 

30 3 1/8 4.0 0.156 4.0 0.89 22.61 0.29 7.33 22 10 400 180 

30 3 3/16 5.5 0.205 5.5 0.95 24.13 0.34 8.63 35 16 800 365 

30 3 1/4 7.0 0.260 7.0 1.20 30.50 0.45 11.40 56 25 1,300 580 

30 3 5/16 8.0 0.312 8.0 1.27 32.27 0.47 11.93 83 38 1,900 860 

30 3 3/8 10.0 0.369 10.0 1.36 34.46 0.57 14.47 125 57 2,650 1,200 

30 3 1/2 13.0 0.480 13.0 1.70 43.18 0.75 19.00 237 108 4,500 2,030 

30 3 5/8 16.0 0.656 16.7 2.10 53.34 0.87 22.09 390 177 6,900 3,130 

30 3 3/4 20.0 0.781 19.8 2.70 68.58 1.02 26.00 535 243 10,600 4,810 

30 3 7/8 22.0 0.906 23.0 2.34 59.44 1.37 34.80 770 349 12,800 5,810 

43 4 1/4 7.0 0.276 7.0 1.20 30.50 0.45 11.40 63 28 2,600 1,180 

43 4 5/16 8.0 0.330 8.4 1.27 32.27 0.47 11.94 102 46 3,900 1,770 

43 4 3/8 10.0 0.380 10.0 1.36 34.54 0.58 14.73 130 59 5,400 2,450 

43 4 7/16 11.9 0.468 11.9 1.29 32.77 0.67 17.02 216 98 7,200 3,270 

43 4 1/2 13.0 0.531 13.0 1.70 43.18 0.75 19.00 260 118 9,200 4,170 

43 4 5/8 16.0 0.656 16.7 1.94 49.27 0.93 23.62 356 161 13,000 5,910 

43 4 3/4 20.0 0.781 23.0 2.21 56.13 1.10 27.94 535 243 20,200 9,180 

70 7 1/4 7.0 0.312 7.9 0.94 23.88 0.46 11.68 91 41 3,150 1,430 

70 7 5/16 8.7 0.343 8.7 1.15 29.21 0.48 11.68 111 50 4,700 2,130 

70 7 3/8 10.0 0.406 10.0 1.36 34.46 0.57 14.47 150 68 6,600 2,990 

70 7 7/16 11.9 0.468 11.9 1.29 32.77 0.67 17.02 212 96 8,750 3,970 

70 7 1/2 13.0 0.531 13.0 1.70 43.18 0.75 19.00 260 118 11,300 5,130 

70 7 5/8 16.0 0.630 16.0 1.93 49.02 0.87 22.10 375 170 15,800 7,170 

80 8 7/32 5.5 0.218 5.5 0.69 17.53 0.30 7.62 43 20 2,100 970 

80 8 5/16 8.0 0.315 8.0 0.94 23.88 0.46 11.68 92 42 4,500 2,000 

80 8 1 26.0 1.000 25.4 2.80 71.12 1.40 35.56 965 438 47,700 21,600 

80 8 1-1/4 32.0 1.250 31.8 3.50 88.90 1.75 44.45 1525 692 72,300 32,800 

100 10 9/32 7.0 0.285 7.2 0.86 21.80 0.41 11.40 74 34 4,300 1,950 

100 10 5/16 8.0 0.330 8.4 1.01 25.70 0.50 13.00 104 47 5,700 2,600 

100 10 3/8 10.0 0.402 10.2 1.22 31.00 0.55 14.00 148 67 8,800 3,990 

100 10 1/2 13.0 0.522 13.2 1.54 39.90 0.45 19.10 250 113 15,000 6,800 

100 10 5/8 16.0 0.643 16.3 1.93 49.00 0.87 22.10 379 172 22,600 10,250 

100 10 3/4 20.0 0.802 20.4 2.42 61.50 1.09 27.70 598 271 35,300 16,000 

100 10 7/8 22.0 0.882 22.4 2.70 68.52 1.28 32.48 775 351 42,700 19,400 

18 


WARNING: 

To prevent the possibility of serious bodily injury: 

• DO NOT USE for overhead lifting or hoisting. 

• DO NOT EXCEED the working load limits for chain or components. 

• DO NOT USE if the chain or components are visibly distorted or worn. 

1269


Important Chain Terms 

WORKING LOAD LIMIT 

The “working load limit” (rated capacity) is the maximum combined static and 

dynamic load in pounds or kilograms that should never be applied to the product in 

service, even when the product is new, and when the load is uniformly applied in 

direct tension to the product. 

PROOF TEST 

The “proof test” is a quality control test applied to chain for the purpose of verifying 

weld and material quality. It is the minimum force in pounds or newtons that the 

chain has withstood in direct tension as part of the manufacturing process. Proof 

testing assures that the chain is more than capable of performing at its rated working 

load limit. Proof test loads are a manufacturing integrity test and shall not be 

used as criteria for service or design purposes. All Campbell proof tested chain and 

components are proof tested in accordance with the applicable ASTM, NACM and 

AISI/ASME requirements. 

Warnings, Cautions, Inspection and Proper Use of Chain 


Campbell chain products and components are designed and built for rugged lasting 

service. As with any quality product certain precautions and standards of treatment 

should be observed. Proper care will extend the useful life of the product. 

INSTRUCTIONS REGARDING COMPONENTS AND FITTINGS 

Components, such as hooks or shackles, should have at least the same working 

load limit (rated capacity) as the chain with which they are used. If not, the assembly 

shall be rated to the capacity of the weakest component. Campbell offers a full line 

of components engineered specifically to be compatible with our chain products. 

WARNINGS AND CAUTIONS 

The use of chain is subject to certain hazards that cannot be met by mechanical 

or manufacturing means, but only by the exercise of intelligence, care, and 

common sense. 

• Do not exceed the working load limit of the chain or any component 

• Chemically active environments may adversely affect chain and components. 

Do not use in highly acidic or caustic environments. Campbell should be contacted 

if the chain will be exposed to chemically active environments during use 

• High and low temperatures will affect chain and components. Campbell should 

be contacted if temperatures below -20°F (-29°C) or above 400°F (200°C) will 

be experienced 

• Chains used in certain application s are subject to governmental regulations. 

Please follow all Federal, State and/or Local Department regulations when using 

Campbell products 

• Never field weld or repair chain 

• See other specific information under 'Inspection and Proper Use' sections 

INSPECTION 

Regular inspections should be conducted on chain to detect damage or deterioration 

from use. The chain should be inspected for any of the below conditions. If present, 

the chain should immediately be removed from service. 

• Cracks in the chain or any component 

• Excessive nicks gouges 

• Excessive wear. Chain should be removed from service if the thickness at 

any point on the link is below the value shown in the Chain Minimum Allowable 

Thickness chart. All other components should be removed from service if any 

dimension is worn by more than 10% from the original dimension 

• Stretched, bent, twisted, or distorted chain links or component 

• Excessive corrosion 

• Evidence of heat damage 

• Evidence of field welding or weld splatter 

• Any other condition which questions the integrity of the chain 

PROPER USE 

To protect the users and to prevent damage to the chain, the following safe practices 

should be followed: 

• Select a chain suitable for the application and environment 

• The hooks or other components should be of a size to fit the intended connections 

• Avoid shock loading 

• Pad all sharp edges or corners in contact with the chain 

• Rig so that the load is properly seated in the hooks or other components. Avoid tip 

loading of hooks and side loading of chain and components 

• Avoid twisting or kinking the chain 

• Never knot chain 

Purchasers please note that all “Warnings and Cautions” apply to chain as well as 

all components and fittings. Purchasers are responsible for conveying the “Warnings 

and Cautions,” including the “Inspection” and “Proper Use” section information to 

the end user. 

Campbell denies any liability for damage that results from use in excess of the working 

load limit or any abuse or misuse of the product. Any questions concerning the 

use of Campbell products may be directed to your Apex Tool Group Sales representative 

or Apex Tool Group Customer Service representative. 

OTHER PRODUCTS 

Campbell produces a number of products for specialty applications. Please contact 

your Apex Tool Group Sales representative, or Customer Service representative, if 

you have special requirements. 

Not all products produced by Campbell appear in this catalog. Campbell can produce 

engineered chain to meet customer design specifications, and also produces 

a variety of chain assemblies. Minimum order quantities may apply to special order 

products. 

NOTICE: The product specifications and dimensions are as accurate as possible at 

the time of printing. However, because we are continually improving the quality and 

design of our products, they can change without notice. 

The dimensions and weights are approximate nominal values, and some variation 

will occur. If specific dimensional requirements are necessary for the application, 

please contact your Apex Tool Group Sales representative, or Customer Service 

representative. 

1270


Care and Maintenance of Chain 

Trade Size 

Nominal Material Diameter Min. Allowable Thickness on Link 

in mm Chain Type or Grade 

in mm in mm 

4 3.0 Machine, Coil 0.120 3.0 0.104 2.64 

3 3.4 Machine, Coil 0.135 3.4 0.117 2.97 

2 3.8 Machine, Coil 0.148 3.8 0.128 3.25 

1 4.1 Machine, Coil 0.162 4.1 0.140 3.56 

1/0 4.5 Machine, Coil 0.177 4.5 0.153 3.89 

2/0 4.9 Machine, Coil, Passing Link 0.192 4.9 0.166 4.22 

3/0 5.3 Machine, Coil 0.207 5.3 0.179 4.55 

4/0 5.5 Machine, Coil, Passing Link 0.218 5.5 0.189 4.80 

5/0 6.4 Machine, Coil 0.250 6.4 0.217 5.50 

1/8 4.0 Grade 30 0.156 4.0 0.135 3.43 

3/16 5.5 Grade 30, 80, 100 0.217 5.5 0.189 4.80 

1/4 - 9/32 7.0 Grade 30, 43, 70, 80, 100 (Grade 43 = 0.281) 0.276 7.0 0.239 6.07 

5/16 8.4 Grade 30 0.331 8.4 0.236 7.28 

5/16 8.7 Grade 43, 70 0.343 8.7 0.297 7.54 

5/16 8.0 Grade 80, 100 0.312 8.0 0.273 6.93 

3/8 10.0 Grade 30, 80, 100 0.394 10.0 0.342 8.69 

3/8 10.3 Grade 43, 70 0.406 10.3 0.351 8.93 

7/16 11.9 Grade 30, 43, 70 0.468 11.9 0.405 10.30 

1/2 13.0 Grade 30, 80, 100 0.512 13.0 0.443 11.26 

1/2 13.5 Grade 43, 70 0.531 13.5 0.460 11.68 

5/8 16.0 Grade 30, 43, 70 0.630 16.0 0.546 13.87 

3/4 20.0 Grade 80, 100 0.787 20.0 0.687 17.45 

7/8 20.0 Grade 30, 43, 80, 100 0.866 22.0 0.750 19.05 

1 26.0 Grade 30, 80 1.020 26.0 0.887 22.53 

1-1/4 32.0 Grade 80 1.260 32.0 1.091 27.71 

18 

WARNING: Remove chain from service if the thickness is less than the minimum shown, at any location on the link 

Finish Abbreviations 

• (S.C.) stands for Self Colored. A finish without any cleaning operations to remove 

oil or dirt or surface oxidation from the welding process. 

• (BRT) stands for Bright. A finsh where the surface is cleaned by shot peening or 

tumbling to produce a clean bright surface 

• (Z.P.) stands for Zinc Plated, Campbell's method of zinc electroplating. The zinc 

electroplating is an attractive finish that also serves to prevent the onset of rust 

on the chain. 

•(Y.C.) stands for Yellow Chromate, a name for Campbell's method of zinc 

electroplating with a yellow chromate finish. The zinc electroplating is an attractive 

finish that also serves to prevent the onset of rust on the chain. The chromate 

finish serves to protect the zinc electroplate 

WARNING: 



• (GALV) stands for Hot-dip Galvanized. Hot-dip galvanizing is a process where the 

chain is immersed in a molton zinc. This produces both a chemical reaction 

between the steel and the zinc, as well as an outside layer of zinc on the chain. 

The end result is an adherent coating of zinc that is much thicker than that 

produced by zinc electroplating. Corrosion resistance is proportional to zinc 

thickness, and therefore galvanized products offer superior corrosion resistance 

to electroplated products. NOTE: Due to temperature of the molten zinc, the 

strengths of hot-dip galvanized products are often reduced by 15%. 

• (M-GALV) stands for Mechanically Galvanized. Mechanical galvanizing is a process 

where zinc powder is mechanically applied to the outside of the chain. Because 

this is a mechanical process and not a molten process, the coating is very uniform. 

• (Polycoated) is a finish where the chain is coated with a colored plastic powder 

which is then fused onto each link. 




1271


Grade 30, Proof Coil Chain - Drums 

■■Excellent Low Carbon Steel Chain for General 

Purpose Applications 

■■Frequently Used for Fabricating Tow Chains, Binding and 

Logging Chains, Marine and Other General Applications 

■■Standard Finish: Self Colored, Zinc Plated or Galvanized 

■■Hallmarking: "C3" and "USA" on 5/16" and Larger 

■■Proof Tested 

■■Design Factor: 4 to 1 

■■Packaged in Drums, Order Unit is "Feet" 

■■Made in the USA 

■■Do Not Use for Overhead Lifting 

■■DO NOT EXCEED THE WORKING LOAD LIMIT 


Trade 

Size Cat. No. UPC No. 

Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 

1/8 in 0120202 020418056932 0.16 in 0.89 in 0.29 in Self-Colored 400 lb 1000 ft 13.5 190 lb 

1/8 in 0120232 020418056949 0.16 in 0.89 in 0.29 in Galvanized 400 lb 1000 ft 13.5 190 lb 


3/16 in 0120322 020418057007 0.21 in 0.95 in 0.34 in Zinc Plated 800 lb 1000 ft 12.6 350 lb 


1/4 in 0120402 020418057076 0.26 in 1.20 in 0.45 in Self-Colored 1300 lb 800 ft 10 460 lb 

1/4 in 0120422 020418057106 0.26 in 1.20 in 0.45 in Zinc Plated 1300 lb 800 ft 10 460 lb 

1/4 in 0120432 020418057144 0.26 in 1.20 in 0.45 in Galvanized 1300 lb 800 ft 10 460 lb 















1272


Grade 30, Proof Coil Chain - Half Drums 

■■Excellent Low Carbon Steel Chain for General Purpose Applications 

■■Frequently Used for Fabricating Tow Chains, Binding and Logging 

Chains, Marine and Other General Applications 

■■Standard Finish: Self Colored or Galvanized 




■■Packaged in Half Drums, Order Unit is "Feet" 




Trade Size Cat. No. UPC No. 

Material 

Diameter 

Inside 

Length Inside Width Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 









Grade 30, Proof Coil Chain - Round Pails 




■■Standard Finish: Zinc Plated or Galvanized 




■■Packaged in Pails, Order Unit is "Each" 





Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 









Weight Per 

Package 


18 


1273


Grade 30, Proof Coil Chain - Square Pails 




■■Standard Finish: Zinc Plated or Galvanized 








Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 











Weight Per 

Package 


Grade 30, Polycoated, Proof Coil Chain - Square Pails 


■■Frequently Used for Swing Sets, Borders, Crowd Control and Other 

General Applications 

■■Standard Finish: Polycoated Yellow or Hi-Visibility Orange 




■■Packaged on Reels, Order Unit is "Each" 




Trade 


Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links 

Per Foot 

1/4 in PD0143426 020418212185 0.26 in 1.20 in 0.45 in Yellow Polycoat 1300 lb 75 ft 10 45 lb 

Weight Per 

Package 

5/16 in HV0142526 020418187940 0.31 in 1.27 in 0.47 in Hi-Visibility Orange Polycoat 1900 lb 75 ft 9.4 62 lb 

1274


Grade 30, Anchor lead, Proof Coil Chain - Square Pails 


■■Frequently Used As Anchor Lead Chain for Marine Applications 

■■Standard Finish: Galvanized and Polycoated White 









Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links 

Per Foot 

5/16 in 0200356 020418183881 0.31 in 1.27 in 0.47 in Galvanized & Polycoated White 1900 lb 75 ft 9.4 62 lb 

Weight Per 

Package 

Grade 30, Proof Coil Chain - Reels 


■■Frequently Used for Swing Sets, Borders, Crowd Control and Other 

General Applications 

■■Standard Finish: Zinc Plated or Polycoated Yellow 








Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


3/16 in PD0725027 020418184642 0.21 in 0.95 in 0.34 in Yellow Polycoat 800 lb 100 ft 10.75 38 lb 


1/4 in PD0722127 020418183393 0.26 in 1.20 in 0.45 in Yellow Polycoat 1300 lb 60 ft 10.75 36 lb 


Weight Per 

Package 


18 


1275


Marine Proof Coil Chain - Drums 

■■Excellent Low-Carbon Steel Chain Made with A Shorter Link Length 

Than Standard Proof Coil 

■■Hot Dipped Galvanized Finish 


■■Hallmarking: "C3" 






Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 


1/4 in 0128132 020418170645 0.28 in 1.00 in 0.50 in Hot Galvanized 1300 lb 800 ft 12 584 lb 



3/8 in 0128332 020418170669 0.41 in 1.23 in 0.62 in Hot Galvanized 2650 lb 400 ft 9.7 640 lb 



Mooring Chain - Drums 

■■Excellent Low Carbon Steel Chain with A Long Link Design for Mooring Applications 

■■The Longer Link Allows the Use of A Shackle Anywhere in the Length of Chain, Not 

Just at End Links 

■■Greater Working Load Limit Than Proof Coil 


■■Hallmarking: "MC" and "USA" 







Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 





1276


BBB Chain - Drums 

■■Especially Made for Windlass or Pocket Wheel Applications 

■■Standard Material: Low Carbon Steel 

■■Standard Finish: Self-Colored (S/C) 


■■Hallmarking: "CB" and "USA" 







Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 


Grade 43, High Test Chain - Drums 

■■Designed for Use in Load Binding, Towing, Logging and Other Applications 

Requiring High Strength 

■■Standard Material: Carbon Steel 

■■Standard Finish: Self Colored or Bright, Zinc Plated or Galvanized 

■■Hallmarking: "C4" All Sizes and "USA" on 1/4" and 5/16" 








Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 











5/8 in 0181012 020418059186 0.66 in 1.94 in 0.93 in Bright 13000 lb 150 ft 6.2 534 lb 



18 


1277


Grade 43, High Test Chain - Round Pails 

■■Designed for Use in Load Binding, Towing, Logging and Other 

Applications Requiring High Strength 


■■Standard Finish: Bright and Zinc Plated 









Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

1/4 in 0181413 020418059278 0.28 in 1.20 in 0.45 in Bright 2600 lb 150 ft 10 98 lb 






Weight Per 

Package 


Grade 43, High Test Chain - Square Pails 




■■Standard Finish: Bright and Galvanized 









Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 





Weight Per 

Package 


1278


Grade 43, Polycoated, High Test Chain - Square Pails 




■■Standard Finish: Polycoated Hi-Visibility Orange 








Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

5/16 in HV0184526 020418187698 0.33 in 1.27 in 0.47 in Hi-Visibility Orange Polycoat 3900 lb 60 ft 9.4 50 lb 

Weight Per 

Package 

Sweep Chain - Drums 

■■Produced Specifically for Scallop and Oyster Dredging 

■■Thru Hardened for Wear Resistance 

■■Hallmarking: "CC" and "USA" 







18 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 


Deck Lashing Chain 

■■Used to Secure Cargo on Ship Decks 

■■Features a Long Link Design 

■■Heat Treated Carbon Steel 

■■Hot Galvanized Finish 


■■Hallmarking: "CCL" and "USA" 


■■Complaint with "Canadian Code of Safe Practice for Ships 

Carrying Timber Deck Cargoes (TP 2534E-1992) 

■■Packaged in Pallet Box, Order Unit is "Feet" 



Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 



1279


Marine Alloy Trawl Chain - Drums 

■■Made of High Strength, Heat Treated Alloy Steel 

■■Designed for Use with the Larger Nets in the Trawling Industry 

■■Special Heat Treatment for the Trawling Industry 

■■Grade 80 Strengths 

■■Hallmarking: "NETS8" and Date Code 






Trade Size Cat. No. UPC No. Chain Type Inside Length Inside Width Finish 

Working Load 

Limit 

Feet Per 

Package 

Weight Per 

Package 

1/2 in 0407512 020418190452 Long Link 3.15 in 0.97 in Bright 12000 lb 300 ft 570 lb 

5/8 in 0407612* 020418190469 Long Link 3.71 in 1.00 in Bright 18100 lb 150 ft 473 lb 

3/4 in 0407712 020418190476 Long Link 3.99 in 1.29 in Bright 28300 lb 100 ft 480 lb 

* These Items are Made to Order 


Grade 70, Transport Chain - Drums 



■■Can Be Used in Accordance with Department of Transportation 

Regulations 

■■Standard Material: Heat Treated Carbon Steel 

■■Standard Finish: Zinc Electroplate with Yellow Chromate 

Conversion Coating 

■■Hallmarking: "C7" and "USA" 







Material 

Diameter Inside Length Inside Width 

Working Load 

Limit 

Feet Per 

Package 

Links Per Foot 

Weight Per 

Package 

1/4 in 0510412 020418063763 0.31 in 0.94 in 0.46 in 3150 lb 800 ft 12.8 752 lb 





1280


Grade 70, Transport Chain - Half Drums 




Regulations 







■■Packaged in Half Drums, Order Unit is "Feet" 




Material 


Working Load 

Limit 

Feet Per 

Package 


Weight Per 

Package 





Grade 70, Transport Chain - Round Pails 




Regulations 











Material 


Working Load 

Limit 

Feet Per 

Package 


Weight Per 

Package 




18 


1281


Grade 70, Transport Chain - Square Pails 

■■Designed for Use in Load Binding, Towing, Logging and Other Applications 

Requiring High Strength 

■■Can Be Used in Accordance with Department of Transportation Regulations 


■■Standard Finish: Zinc Electroplate with Yellow Chromate Conversion Coating 








Material 


Working Load 

Limit 

Feet Per 

Package 


1/4 in 0510426 020418183867 0.31 in .94 in 0.46 in 3150 lb 65 ft 12.8 64 lb 



Weight Per 

Package 


Tuna Net Chain - Drums 

■■Made of High Strength, Heat Treated Steel 

■■Designed for Sinker Lines and Bridles in Purse Seining 

■■Hot Dip Galvanized Finish 

■■Hallmarking: "ST" and "USA" 







Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 





Dock Fender Chain - Drums 

■■High Tensile Chain Holds Thick Rubber Fenders to Dock Sides 



■■Hallmarking: "C-DF" 






Material 

Diameter Inside Length Inside Width Finish 

Working Load 

Limit 

Feet Per 

Package 

Weight Per 

Package 

5/8 in 0516531 020418181887 0.66 in 3.75 in 0.90 in Hot Galvanized 12500 lb 150 ft 480 lb 

3/4 in 0516631 020418181894 0.78 in 3.75 in 1.13 in Hot Galvanized 22300 lb 100 ft 446 lb 

1282


Beacon Fishing Chain 


■■Standard Finish: Bright (Brt) 


■■Hallmarking: "CB" and "USA" 

■■Uses: Designed to Accommodate All Types of Chain Needs in 

the Trawling and Marine Industry 






Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 




Grade 80, Cam-Alloy Chain 

■■Specifically Recommended for Overhead Lifting Applications 

■■Standard Material: Alloy Steel, Heat Treated 

■■Standard Finish: Bright 

■■Hallmarking: "C8", "USA" and Traceability Code 







Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 


1 in 0401612 020418063510 1.00 in 2.80 in 1.40 in Bright 47700 lb 100 ft 4.3 965 lb 

1-1/4 in 0402012 020418063534 1.25 in 3.50 in 1.75 in Bright 72300 lb 60 ft 3.5 915 lb 

18 


1283


Grade 100, Cam-Alloy Chain 

■■Specifically Recommended for Overhead Lifting Applications 

■■25% Stronger Than Grade 80 Which Enables You to Perform 

Same Lifts with Lighter Weight Chain 

■■Standard Material: Alloy Steel, Heat Treated 


■■Hallmarking: "C10", "USA" and Traceability Code 







Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 









Stainless Steel Chain 

■■Uses: Food Processing, Chemical and Marine Applications, 

Wherever Non-Magnetic, Electrically Welded Corrosion Resistant 

Chain is Needed 

■■Standard Material: Type 316L Stainless 


■■Hallmarking: "316" 



■■Cut to Order, Order Unit is "Feet" 



■■Working load limits (WLL) shown are room temperatures. Reduce 

WLL by 15% for temperatures up to 250°F, 25% between 250°F 

and 

■■800°F, 33% between 800°F and 1000°F, 50% between 1000°F 

and 1200°F, and 60% between 1200°F and 1400°F. 


Material 


Working Load 

Limit Links Per Foot 

Weight Per 

100 Feet (lbs) 

5/32 in 0192411 020418177422 0.156 in 0.89 in 0.28 in Bright 500 lb 15.6 21 


1/4 in 0192911 020418176050 0.250 in 1.00 in 0.43 in Bright 1570 lb 12 75 



1284


Aluminum Chain 

■■Standard Material: 5056 Aluminum-Magnesium Alloy 




■■Uses: Chemical Processing, Petroleum, Refining, Food 

Processing, Landscaping, Crowd Control, Wherever A Non- 

Magnetic, Non-Sparking Chain is Needed 

■■Cut to Order, Order Unit is "Feet" 


■■Do Not Use for Overhead Lifting or Dynamic Load Conditions 



Material 


Working Load 

Limit Links Per Foot 

Weight Per 

100 Feet (lbs) 



Straight Link Machine Chain - Cartons 

■■Uses: General Utility, Animal, and Farm and Ranch Applications 


■■Standard Finish: Bright and Zinc Plated 



■■Packaged in Cartons, Order Unit is "Feet" 





Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 

4 0310424 020418060908 0.12 in 0.55 in 0.21 in Zinc Plated 215 lb 100 ft 21.8 11 lb 




1/0 0311024 020418060946 0.18 in 0.74 in 0.31 in Zinc Plated 465 lb 100 ft 16.2 27 lb 

2/0 0312014 020418060977 0.18 in 0.78 in 0.34 in Bright 545 lb 100 ft 15.4 29 lb 






18 


1285


Straight Link Machine Chain - Reels 



■■Standard Finish: Zinc Plated and Brass Glo 







Trade 


Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

4 AW0310427 020418145384 0.12 in 0.55 in 0.21 in Zinc Plated 215 lb 100 ft 22 3.5 in 12 lb 

3 0723367 020418064814 0.14 in 0.59 in 0.24 in Brass Glo 270 lb 50 ft 20 3.5 in 9 lb 

2 0726727 020418184475 0.15 in 0.61 in 0.26 in Zinc Plated 325 lb 125 ft 19.7 10.75 in 26 lb 

Weight Per 

Package 

Twist Link Machine Chain - Cartons 

■■Uses: General Utility Applications 


■■Standard Finish: Bright, Zinc Plated and Galvanized 








Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


2 0320214 020418061127 0.15 in 0.58 in 0.21 in Bright 310 lb 100 ft 20.7 20 lb 





5/0 0325034 020418061349 0.25 in 1.00 in 0.37 in Galvanized 880 lb 100 ft 12.0 56 lb 



■■Standard Finish: Brass Glo and Zinc Plated 







Twist Link Machine Chain - Reels 

Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

Weight Per 

Package 

4 AW0320427 020418145391 0.12 in 0.52 in 0.17 in Zinc Plated 205 lb 100 ft 23.0 3.5 in 13 lb 

2 0723388 020418064838 0.15 in 0.58 in 0.21 in Brass Glo 310 lb 70 ft 20.7 3.5 in 15 lb 


Weight Per 

Package 

2/0 0722527 020418183300 0.18 in 0.73 in 0.28 in Zinc Plated 520 lb 70 ft 16.0 5.5 in 21 lb 

1286




■■Standard Finish: Zinc Plated 







Twist Link Machine Chain - Round Pails 

Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


Weight Per 

Package 










Twist Link Machine Chain - Square Pails 

Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


Weight Per 

Package 

18 

Straight Link Coil Chain - Cartons 

■■Typical Uses Include Tailgates, Barrier Guards, Swing Sets, 

Hanging Light Fixtures and Animal Chains 










Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 









Weight Per 

Package 



1287


Straight Link Coil Chain - Reels 




■■Standard Finish: Zinc Plated and Yellow Polycoated 







Trade 


Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

4 AW0330427 020418145445 0.12 in 1.11 in 0.21 in Zinc Plated 205 lb 100 ft 10.8 3.5 in 11 lb 




2/0 PD0722627 020418183409 0.18 in 1.29 in 0.34 in Yellow Polycoat 520 lb 120 ft 9.3 10.75 in 35 lb 


Weight Per 

Package 


■■Used as Swing Set Chain 


■■Standard Finish: Zinc Plated With Green Sleeve 







Straight Link Coil Green Sleeve Chain - Reels 

Material 

Diameter 

Inside 

Length 

Straight Link Coil Chain - Round Pails 











Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

Weight Per 

Package 

2/0 PS0332027 020418208997 0.19 in 1.30 in 0.30 in Green Sleeve 520 lb 60 ft 9.3 10.75 in 21 lb 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


Weight Per 

Package 

1288


Straight Link Coil Chain - Square Pails 












Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 





Weight Per 

Package 

Studio Chain - Carton 

■■Uses: Hanging Theatrical Lights and Fixtures 



■■Hallmarking: "CS" and "USA" 






18 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

6/0 0336015 020418192876 0.28 in 1.50 in 0.47 in Bright 2000 lb 100 ft 8 63 lb 

Weight Per 

Package 

Twist Link Coil Chain - Cartons 

■■Typical Uses Include Tailgates, Barrier Guards, Light Fixtures 

and Animal Chains 

■■Difference Over Straight Link is Twist Link Chain Lies Flat 









Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Weight Per 

Package 



1289


Twist Link Coil Chain - Reels 

■■Typical Uses Include Tailgates, Barrier Guards, Light Fixtures 

and Animal Chains 

■■Difference Over Straight Link is Twist Link Chain Lies Flat 


■■Standard Finish: Brass Glo 







Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

3 0723167 020418064777 0.14 in 1.14 in 0.21 in Brass Glo 240 lb 50 ft 10.5 3.5 in 7.5 lb 

Weight Per 

Package 

Passing Link Chain - Cartons 












Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


Passing Link Chain - Reels 











Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

Weight Per 

Package 


Weight Per 

Package 


1290


Passing Link Chain - Square Pails 











Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


Weight Per 

Package 

■■For Hanging Fixtures and Plants 









Handy Link Utility Chain - Square Pails 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 


Weight Per 

Package 

18 

■■For Hanging Fixtures and Plants 










Handy Link Utility Chain - Reels 

Material 

Diameter 

Inside 

Length 

Inside 

Width 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

Weight Per 

Package 

120 0723169 020418064784 0.120 in 1.35 in 0.34 in Zinc Plated 255 lb 175 ft 8.9 10.75 in 17.5 lb 


1291


Lock Link, Single Loop Chain - Cartons 

■■Ideal for Sprocket Wheel, Overhead Door Chains, General Utility Use 


■■Standard Finish: Zinc Plated, Galvanized 







Material 

Diameter 

Inside 

Length Finish End Type 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

2 0740224 020418066238 0.09 in 1.08 in Zinc Plated Sheared 155 lb 100 ft 11.1 9 lb 

2 0740234 020418066252 0.09 in 1.08 in Galvanized Sheared 155 lb 100 ft 11.1 9 lb 

1/0 0741024 020418066290 0.12 in 1.29 in Zinc Plated Wrapped 265 lb 100 ft 9.3 16 lb 

1/0 0741034 020418066320 0.12 in 1.29 in Galvanized Wrapped 265 lb 100 ft 9.3 16 lb 


2/0 0742034 020418066399 0.14 in 1.48 in Galvanized Wrapped 340 lb 100 ft 8.1 23 lb 




Weight Per 

Package 


Lock Link, Single Loop Chain - Reels 

■■Ideal for Sprocket Wheel, Overhead Door Chains, General Utility Use 









Material 

Diameter 

Inside 

Length Finish End Type 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

2 0740237 020418066269 0.09 in 1.08 in Galvanized Sheared 155 lb 360 ft 11.1 10.75 in 33 lb 

1/0 0741037 020418066337 0.12 in 1.29 in Galvanized Wrapped 265 lb 250 ft 9.3 10.75 in 40 lb 

3/0 0723427 020418064845 0.15 in 1.63 in Zinc Plated Wrapped 405 lb 125 ft 7.4 10.75 in 33 lb 




Weight Per 

Package 


1292


Brass Plumber's Chain - Cartons 

■■Plumbing Fixtures, & Other Applications Requiring Light Flat Metal Chain 

■■Standard Material: Brass 








Stock 

Thickness (in) Inside Length Finish 

Working Load 

Limit 

Feet Per 

Package 


2/0 0872014 020418067877 0.02 in 0.55 in Bright 23 lb 100 ft 21.8 2 lb 

1/0 0871014 020418067839 0.02 in 0.55 in Bright 35 lb 100 ft 21.8 2 lb 

Weight Per 

Package 


Brass Plumber's Chain - Reels 

■■Plumbing Fixtures, & Other Applications Requiring Light Flat Metal Chain 

■■Standard Material: Brass 







Stock Thickness 

(in) 

Inside 

Length 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

1/0 0723817 020418064883 0.02 in 0.55 in Bright 35 lb 200 ft 21.8 3.5 in 5 lb 

Weight Per 

Package 

18 

Inco, Double Loop Chain - Cartons 

■■Farm and Animal Chains, and Many General-Purpose Applications 






■■Note: Avoid Twisting in Suspension Applications 

■■Campbell Recommends The Use of Proof Coil or Straight Link Coil 

Chain for Swing Set Applications 



Trade Size Cat. No. UPC No. Material Diameter Inside Length Finish Working Load Limit Feet Per Package Links Per Foot 

4 0750424 020418066818 0.07 in 1.00 in Zinc Plated 70 lb 100 ft 12.0 5 lb 




1/0 0751034 020418066924 0.12 in 1.78 in Galvanized 200 lb 100 ft 6.7 13 lb 

2/0 0752024 020418066979 0.14 in 2.17 in Zinc Plated 255 lb 100 ft 5.5 16 lb 



Weight Per 

Package 



1293


Inco, Double Loop Chain - Round Pails 













Material 

Diameter Inside Length Finish 

Working Load 

Limit 

Feet Per 

Package 



Weight Per 

Package 


Inco, Double Loop Chain - Square Pails 



■■Standard Finish: Zinc Plated, Polycoated in White or Yellow Color 









Trade 


Material 


Working Load 

Limit 

Feet Per 

Package 





Weight Per 

Package 

2/0 PD0752496 020418183584 0.14 in 2.17 in Yellow Polycoat 255 lb 200 ft 5.5 36 lb 

1294


Inco, Double Loop Chain - Reels 



■■Standard Finish: Zinc Plated, Polycoated in White, Yellow, Green or 

Red Colors 









Trade 


Material 

Diameter 

Inside 

Length 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

4 0720427 020418064593 0.07 in 1.00 in Zinc Plated 70 lb 500 ft 12.0 10.75 in 24 lb 


3 LPA0722227 020418228902 .08 in 1.1 in White Polycoat 90 lb 80 ft 10.9 3.5 in 6 lb 

3 PG0722227 020418183423 0.08 in 1.10 in Red Polycoat 90 lb 150 ft 10.9 5.5 in 11 lb 




1/0 AW0751024 020418145612 0.12 in 1.78 in Zinc Plated 200 lb 100 ft 6.7 5.5 in 13 lb 

2/0 PA0722027 020418183355 0.14 in 2.17 in White Polycoat 255 lb 125 ft 5.5 10.75 in 22 lb 

2/0 PD0722027 020418183386 0.14 in 2.17 in Yellow Polycoat 255 lb 125 ft 5.5 10.75 in 23 lb 

2/0 PE0722027 020418183416 0.14 in 2.17 in Green Polycoat 255 lb 125 ft 5.5 10.75 in 22 lb 

2/0 0722027 020418183263 0.14 in 2.17 in Zinc Plated 255 lb 155 ft 5.5 10.75 in 26 lb 


2/0 PD0722087 020418183577 0.14 in 2.17 in Yellow Polycoat 255 lb 50 ft 5.5 5.5 in 10 lb 



Weight Per 

Package 

18 

Special Inco Well Chain 

■■General Utility; Farm and Animal; Well Pipes 

■■Standard Material: Low Carbon Steel, Galvanized Wire 

■■Packaged in Cartons, Order Unit is "Feet" or Pail, Order Unit is 

"Each" 





Material 

Diameter 

Inside 

Length Finish Packaged 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

2/0 0762024 020418067174 0.14 in 2.50 in Zinc Coated Carton 255 lb 250 ft 5.5 41 lb 

Weight Per 

Package 

2/0 T0762026 020418237843 0.14 in 2.50 in Zinc Coated Square Pail 255 lb 250 ft 5.5 41 lb 


1295


■■Fixture and Novelty Suspension 

■■General Utility Use Not Requiring High Strength 








Single Jack Chain - Cartons 

Material 


Working Load 

Limit 

Feet Per 

Package 


16 0801624 020418067402 0.06 in 0.50 in Zinc Plated 10 lb 100 ft 24 3 lb 





Weight Per 

Package 


Single Jack Chain - Reels 




■■Standard Finish: Zinc Plated, Brass Glo and Black Polycoated 





Trade 


Material 

Diameter 

Inside 

Length 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

16 0724027 020418064920 0.06 in 0.50 in Zinc Plated 10 lb 250 ft 24 3.5 in 8 lb 

14 PB0722827 020418183379 0.08 in 0.63 in Black Polycoat 16 lb 190 ft 19 3.5 in 10 lb 

14 AW0801427 020418145698 0.08 in 0.63 in Zinc Plated 16 lb 200 ft 19 3.5 in 12 lb 


12 0724022 020418064913 0.11 in 0.75 in Brass Glo 29 lb 100 ft 16 3.5 in 9 lb 






■■Standard Finish: Zinc Plated, Brass Glo 





Double Jack Chain - Reels 

Weight Per 

Package 


Material 

Diameter 

Inside 

Length 

Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 


16 0721667 020418064739 0.06 in 0.34 in Brass Glo 11 lb 200 ft 35 3.5 in 9 lb 

Weight Per 

Package 

1296


Sash Chain - Cartons 

■■Counter-Balance Chain for Double Hung Window Sashes 

■■Also for Arc Lamp Chain, Animal Chain 


■■Standard Finish: Zinc Plated, Copper Glo, Solid Bronze 





■■Note: * 0880844 includes fixtures for 7 double hung sashes. 

Order unit is box. 



Stock 


Working Load 

Limit 

Feet Per 

Package 



8 0890844 020418067976 0.04 in 0.55 in Copper Glo 75 lb 100 ft 22 4 lb 

8 * 0880844 020418067921 0.04 in 0.55 in Copper Glo 75 lb 100 ft 22 4 lb 



35 0893544 020418068225 0.04 in 0.59 in Copper Glo 106 lb 100 ft 20 6 lb 

35 0893574 020418068249 0.04 in 0.59 in Solid Bronze 100 lb 100 ft 20 6 lb 


40 0894074 020418068324 0.04 in 0.59 in Solid Bronze 125 lb 100 ft 20 7 lb 



Weight Per 

Package 

Stainless Steel Sash Chain - Cartons 



■■Standard Material: Type 304 Stainless Steel 

■■Standard Finish: Polished 





■■Size 35 is also known as size 3 Navy chain 


Trade 


Stock 


Working Load 

Limit 

Feet Per 

Package 


8 0898014 020418068560 0.04 in 0.55 in Stainless Steel 75 lb 100 ft 22 4 lb 

35 0895314 020418068515 0.04 in 0.59 in Stainless Steel 175 lb 100 ft 20 6 lb 

Weight Per 

Package 

18 


1297


Sash Chain - Reels 











Stock Thickness 

(in) 

Inside 

Length Finish 

Working 

Load Limit 

Feet Per 

Package 

Links Per 

Foot 

Reel Width 

(in.) 

Weight Per 

Package 





Decorator Chain 

■■For Hanging Plants and Lamps, Drapery Tie-Backs 

■■Finishes: Zinc Plated, Brass Glo, Black Polycoated, Antique 

Brass, White Polycoated, Antique Copper, Antique Silver, 

Brushed Nickel 

■■Order Unit is "Each Real" 



Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 

Weight Per 

Package 

4 0720428 020418178771 0.120 in 0.58 in 0.21 in Zinc Plated 70 lb 90 ft 3.5 in 10 lb 

10 0722000 020418190834 0.135 in 1.21 in 0.52 in Brass Glo 35 lb 60 ft 3.5 in 10 lb 

10 0722002 020418183218 0.135 in 1.21 in 0.52 in Black Polycoat 35 lb 40 ft 3.5 in 6.8 lb 

10 0722003 020418183225 0.135 in 1.21 in 0.52 in Antique Brass 35 lb 40 ft 3.5 in 6.8 lb 

10 0722004 020418183232 0.135 in 1.24 in 0.52 in White Polycoat 35 lb 40 ft 3.5 in 6.8 lb 

10 0722006 020418183249 0.135 in 1.21 in 0.52 in Antique Copper 35 lb 40 ft 3.5 in 6.8 lb 

10 0722007 020418183256 0.135 in 1.21 in 0.52 in Antique Silver 35 lb 40 ft 3.5 in 6.8 lb 

10 0722010 020418212161 0.135 in 1.21 in 0.52 in Brushed Nickel 35 lb 40 ft 3.5 in 6.8 lb 

Hobby/Craft Decorator Chain - Standard Reels 

■■Used for Decorative and Hobby/Craft Applications 

■■Finishes: Brass Plated, Black 

■■Order Unit is "Each Reel" 



Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 

Weight Per 

Package 

100 0711017 020418188251 0.087 in 0.63 in 0.24 in Brass Plated 13 lb 197 ft 4.5 in 11.6 lb 

100 0711077 020418188268 0.087 in 0.63 in 0.24 in Black 13 lb 197 ft 4.5 in 11.6 lb 

1298


Hobby/Craft Cathedral Chain - Standard Reels 


■■Finishes: Brass Plated, Black, White 



Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 

31 0713117 020418188374 0.087 in 0.95 in 0.40 in Brass Plated 20 lb 98 ft 4.5 in 7 lb 

31 0713177 020418188381 0.087 in 0.95 in 0.40 in Black 20 lb 98 ft 4.5 in 7 lb 

31 0713187 020418188398 0.087 in 0.95 in 0.40 in White 20 lb 98 ft 4.5 in 7 lb 


32 0713277 020418188428 0.105 in 1.57 in 0.56 in Black 35 lb 66 ft 4.5 in 7 lb 

Weight Per 

Package 

Hobby/Craft Twist Chain - Mini Reels 


■■Finishes: Brass Plated, Nickel Plated, Black 



18 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 



90 0719027 020418188589 0.056 in 0.21 in 0.12 in Nickel Plated 5 lb 82 ft 3.25 in 2 lb 



250 0712577 020418188336 0.099 in 0.33 in 0.16 in Black 25 lb 33 ft 3.25 in 2.8 lb 

Hobby/Craft Clock Chain - Mini Reels 


■■Finishes: Brass Plated 



Weight Per 

Package 


Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 



Weight Per 

Package 


1299


Hobby/Craft Sash Chain - Mini Reels 


■■Finishes: Chrome Plated 



Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 

2 0710227 020418188176 0.016 in 0.58 in 0.20 in Chrome Plated 29 lb 164 ft 3.25 in 2.1 lb 

3 0713027 020418188367 0.020 in 0.75 in 0.27 in Chrome Plated 25 lb 82 ft 3.25 in 1.8 lb 

Weight Per 

Package 

Ball Chain 

■■Used for Chain Pulls and Other Home and Craft Projects 

■■Ball Chain Connectors are packed 6 pcs per Bag and 10 Bags 

per Box 



Trade 


Material 

Diameter Chain Type Finish 

Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 

Weight Per 

Package 

36 0713627 020418188459 0.142 in #36 Ball Chain Chrome Plated 11 lb 164 ft 3.25 in 2.60 lb - 

36 B0713601 020418156755 - #36 Ball Chain Connector Chrome Plated - - - - 10 

36 B0713602 020418157943 - #36 Ball Chain Connector Brass Plated - - - - 10 

Hobby Chain - Carded 


■■Finishes: Brass Plated, Nickel Plated, Black 


Trade 


Material 

Diameter Chain Type Finish 

Working 

Load Limit 

Feet Per 

Card 

Weight Per 

Package 

200 C0712017 020418212543 0.079 in #200 Twist Chain Brass Plated 12 lb 10 0.58 lb 5 

200 C0712027 020418212536 0.079 in #200 Twist Chain Nickel Plated 12 lb 10 0.58 lb 5 

5 C0710517 020418212505 0.051 in #5 Clock Chain Brass Plated 10 lb 15 0.39 lb 5 

36 C0713617 020418212529 0.142 in #36 Ball Chain w/2 connectors Brass Plated 11 lb 6 0.12 lb 5 

36 C0713627 020418212512 0.142 in #36 Ball Chain w/2 connectors Nickel Plated 11 lb 6 0.12 lb 5 

Shelf 

Pack Qty. 

Shelf Pack 

Qty. 

1300


Oval Link Chain 


■■Finishes: Brass Plated 



Trade 


Material 

Diameter 

Inside 


Working 

Load Limit 

Feet Per 

Package 

Reel Width 

(in.) 

Weight Per 

Package 


Plastic Chain - Square Pails 

■■Used for Creating Borders for Flower Beds, Gardens, Driveways, Etc. 

■■For Decorative Non-Load Bearing Use Only 

■■Available in Three Colors: White, Yellow or Black 

■■Order Unit is "Each Pail" 

■■Do Not Use for Overhead Lifting, Towing or Pulling 

Trade Size Cat. No. UPC No. Material Diameter Inside Length Inside Width Color Feet Per Package Weight Per Package 

6 0990646 020418185168 0.23 in 1.00 in 0.30 in White 220 ft 16 lb 

8 0990836 020418185182 0.29 in 1.50 in 0.40 in Yellow 138 ft 12 lb 

8 0990846 020418185205 0.29 in 1.50 in 0.40 in White 138 ft 12 lb 

8 0990856 020418185229 0.29 in 1.50 in 0.40 in Black 138 ft 12 lb 

18 

Plastic Chain - Reels 

■■Used for Creating Borders for Flower Beds, Gardens, Driveways, Etc. 

■■For Decorative Non-Load Bearing Use Only 

■■Available in Three Colors: White, Yellow or Black 


■■Do Not Use for Overhead Lifting, Towing or Pulling 


Material 

Diameter Inside Length Inside Width Color 

Feet Per 

Package 

Reel Width 

(in.) 

6 0990647 020418185175 0.23 in 1.00 in 0.30 in White 100 ft 10.75 in 7 lb 

8 0990837 020418185199 0.30 in 1.50 in 0.50 in Yellow 60 ft 10.75 in 5 lb 

8 0990847 020418185212 0.30 in 1.50 in 0.50 in White 60 ft 10.75 in 5 lb 

8 0990857 020418185236 0.30 in 1.50 in 0.50 in Black 60 ft 10.75 in 5 lb 

Weight Per 

Package 


1301


■■High Strength Cable with A Galvanized Finish 

■■Flexible 7 X 7 or 7 X 19 Construction 



Cable - Uncoated, Galvanized 

Cat. No. UPC No. Size (in.) Construction Type Working Load Limit Feet Per Package Reel Width (in.) Weight Per Package 

7000227 020418100253 1/16 7 x 7 96 lb 500 ft 3.5 in 5 lb 

7000327 020418100260 3/32 7 x 7 185 lb 500 ft 3.5 in 14 lb 

7000427 020418100284 1/8 7 x 7 340 lb 500 ft 3.5 in 16 lb 

7000627 020418100307 3/16 7 x 19 840 lb 250 ft 3.5 in 18 lb 

7000827 020418100321 1/4 7 x 19 1400 lb 250 ft 6 in 26 lb 

7000927 020418189463 5/16 7 x 19 1960 lb 200 ft 6 in 35 lb 


Cable - Vinyl Coated 

■■High Strength Cable with A Galvanized Finish 

■■Clear Vinyl Coated 


■■Vinyl Coated Cable is More Resistant to Abrasion and Weathering 

■■Can Be Cleaned Easily 

■■Warning: Remove Plastic Coating From Cable Where Clips, 

Clamps, Ferrules or Hardware Are Attached 



Cat. No. UPC No. Size (in.) 

Size With 

Coating (in.) 

Construction 

Type 

Working Load 

Limit 

Feet Per 

Package 

Reel Width (in.) 

7000397 020418100277 3/32 3/16 in 7 x 7 184 lb 250 ft 3.5 in 8 lb 

7000497 020418100291 1/8 3/16 in 7 x 7 340 lb 250 ft 3.5 in 10 lb 

7000697 020418100314 3/16 1/4 in 7 x 19 840 lb 250 ft 6 in 20 lb 

7000897 020418100338 1/4 5/16 in 7 x 19 1400 lb 200 ft 6 in 26 lb 

Cable - Coated Green 

■■Green Vinyl Coated Cable 

■■1 X 7 Iron Wire Construction Which Enables Bending or Shaping 

of Cable 

■■Vinyl Coated Cable is More Resistant to Abrasion and 

Weathering 

■■Can Be Cleaned Easily 

■■Warning: Remove Plastic Coating From Cable Where Clips, 

Clamps, Ferrules or Hardware Are Attached 



Weight Per 

Package 

Cat. No. UPC No. Size (in.) 

Size With 

Coating (in.) 

Construction 

Type 

Working Load 

Limit 

Feet Per 

Package 

Reel Width (in.) 

7000197 020418189456 1/16 1/8 in 1 x 7 28 lb 250 ft 3.5 in 5 lb 

Weight Per 

Package 

1302


Cable - Stainless Steel 

■■High Strength Stainless Steel Cable 

■■Type 304 Stainless Steel 





T7000226 020418240775 1/16 7 x 7 96 lb 250 ft 3.5 in 2.3 lb 

T7000326 020418240782 3/32 7 x 7 184 lb 250 ft 3.5 in 6.3 lb 

7000426 020418193071 1/8 7 x 7 340 lb 250 ft 3.5 in 7.2 lb 

7000626 020418193088 3/16 7 x 19 740 lb 250 ft 3.5 in 16 lb 

7000826 020418193095 1/4 7 x 19 1280 lb 250 ft 6 in 26 lb 

T7000926 020418238192 5/16 7 x 19 1800 lb 200 ft 6 in 35 lb 

Wire Rope - Uncoated 

■■6X19 Fiber Core Construction 

■■Treated with A Rust Prohibiting Oil 




7008027 020418190902 1/4 6 x 19 1040 lb 500 ft 8.5 in 53 lb 

7008227 020418190919 5/16 6 x 19 1700 lb 500 ft 8.5 in 82 lb 

7008327 020418190926 3/8 6 x 19 2400 lb 250 ft 8.5 in 58 lb 

7008427 020418190933 1/2 6 x 19 4280 lb 250 ft 9.75 in 102 lb 

18 


1303


Chain and Cable - Plastic Clam Shell Packs 

■■Product Packaged in Clear, See-Through Plastic Clam Shells 

■■Customer Can See Product First Hand 

■■Package Will Sit Upright on Shelf or Can Be Hung Using 

Convenient Hang Up Hole 




Cat. No. UPC No. Size and Description Working Load Limit 

Feet Per 

Package 

Weight Per 

Package 

5971230 020418185243 3/16" Proof Coil Chain, Zinc Plated 800 lb 10 ft 4 lb 6 

5973000 020418185250 2/0 Passing Link Chain, Zinc Plated 450 lb 10 ft 3.4 lb 5 

5973310 020418185274 2/0 Straight Link Coil Chain, Zinc Plated 520 lb 10 ft 3 lb 5 

5977502 020418185304 #3 Doulble Loop (Inco) Chain, Zinc Plated 90 lb 15 ft 1 lb 9 

5977510 020418185311 #1 Double Loop (Inco) Chain, Zinc Plated 155 lb 15 ft 1.7 lb 5 

5977522 020418185335 2/0 Double Loop (Inco) Chain, Zinc Plated 255 lb 15 ft 2.6 lb 6 

5978000 020418185342 #12 Single Jack Chain, Zinc Plated 29 lb 15 ft 1.4 lb 9 

5979600 020418185403 #10 Decorator Chain, Brass Glo 35 lb 10 ft 1.4 lb 5 

5979610 020418185410 #10 Decorator Chain, Black 35 lb 10 ft 1.6 lb 5 

5979630 020418185434 #10 Decorator Chain, White 35 lb 10 ft 1.6 lb 5 

5977001 020418185571 3/32" Vinyl Coated Cable 184 lb 50 ft 2 lb 5 

5977011 020418185595 1/8" Vinyl Coated Cable 340 lb 50 ft 2 lb 5 

5977020 020418185601 3/16" Vinyl Coated Cable 840 lb 25 ft 2.2 lb 5 

5977206CBL 020418239540 3/16" x 6' Security Cable 840 lb 6 ft .6 lb 3 

5977405CBL 020418239557 1/8" x 50' Galvanized Cable w/Swaged Eye One End 340 lb 50 ft 1.5 lb 3 

5977410CBL 020418239564 1/8" x 100' Galvanized Cable w/Swaged Eye One End 340 lb 100 ft 3 lb 3 

5977610CBL 020418239571 1/8" x 100' Vinyl Coated Cable w/Swaged Eye One End 340 lb 100 ft 3.4 lb 3 

Construction Chain 

■■Manufactured Using Grade 30 Proof Coil Chain 

■■Self Colored Finish 

■■General Purpose Chain Primarily Used in Telecommunications 

Industry for Tying, Binding and Pulling; Outside the Plant 

■■Order unit is "Each" 



Cat. No. UPC No. Size/Trade Size Weight Each (lbs.) Working Load Limit 

0213505 020418178405 5/16 in x 4-1/3 ft. 6 lb 1700 lb 

Shelf Pack Qty. 

1304


Winch Line Chains 

■■Made From Alloy Chain and Used with Wire Rope When 

Wrapping is Required to Lift, Pull or Skid 

■■Special Hook is Designed to Minimize Fraying of Wire Rope to 

Which It is Attached 


■■Bulk Packaged, Order Unit is "Each" 



Trade Size Cat. No. UPC No. Chain Length Weight Each (lbs.) Working Load Limit 

3/4 in 2011295 020418068706 18 in 12 lb 23000 lb 

7/8 in 2011495 020418068713 24 in 24 lb 34200 lb 

1 in 2011695 020418068720 24 in 27 lb 38700 lb 

Log Chain 

■■Made From Grade 30 Proof Coil Chain with Grab Hook One End, 

Slip Hook Other End 

■■Standard Finish: Self Colored 



■■Packed One 14 Ft. Length Per Bag; 2 Bags Per Box 




Trade Size Cat. No. UPC No. Length Weight Each (lbs.) Working Load Limit 

3/8 in 1005505 020418068591 14 ft 23 lb 2650 lb 

18 

Grade 43, Binder Chains 

■■Binder Chains Manufactured Using Grade 43 Chain and Feature 

Forged Heat Treated Clevis Grab Hooks on Each End 


■■Chains May Be Used in Accordance with the Latest D.O.T. 

Regulations 

■■Used to Tie Down or "Bind" Loads for Transportation 

■■Packaged in Drums, Order Unit is "Each" 




Cat. No. UPC No. Size/Trade Size Pieces Per Package Weight Each (lbs.) Working Load Limit 

0226615 020418059995 5/16 in x 20 ft 25 20 lb 3900 lb 

0226625 020418060007 5/16 in x 25 ft 25 25 lb 3900 lb 

0222525 020418174339 3/8 in x 12 ft 25 19 lb 5400 lb 

0222625 020418174353 3/8 in x 14 ft 25 21 lb 5400 lb 

0222725 020418174377 3/8 in x 16 ft 20 25 lb 5400 lb 

0222925 020418174414 3/8 in x 20 ft 20 32 lb 5400 lb 

0223025 020418174438 3/8 in x 25 ft 20 37 lb 5400 lb 


1305


Grade 43, Binder Chains, Packed in Pail or Vinyl Bag 




■■Chains May Be Used in Accordance with the Latest D.O.T. Regulations 


■■Packaged in Pails or Bags, Order Unit is "Each" 




Cat. No. UPC No. Size/Trade Size Packaging Weight Each (lbs.) Working Load Limit Shelf Pack Qty. 

T0222725 020418163067 3/8 in x 16 ft 1 per Bag 25 lb 5400 lb 2 


T0223820 020418237829 3/8 in x 20 ft 3 per Pail 32 lb 5400 lb 3 


Grade 70 Binder Chains 



■■Standard Finish: Chain Has Yellow Chromated Zinc Electroplate 

Finish, Hooks Are Bright Finish 

■■Chains May Be Used in Accordance with the Latest D.O.T. 

Regulations 

■■Grade 70 Binder Chains Provide Higher Load-To-Weight Ratios 


■■Packaged in Drums, Order Unit is "Each" 




Cat. No. UPC No. Size/Trade Size Pieces Per Package Weight Each (lbs.) Working Load Limit 

0513571 020418174162 5/16 in x 14 ft 25 15 lb 4700 lb 

0513572 020418174179 5/16 in x 16 ft 25 17 lb 4700 lb 

0513574 020418174193 5/16 in x 20 ft (Short Link) 25 24 lb 4700 lb 

0513576 020418212130 5/16 in x 20 ft (Long Link) 25 22 lb 4700 lb 

0513575 020418174209 5/16 in x 25 ft 25 30 lb 4700 lb 

0513658 020418064128 3/8 in x 14 ft 25 24 lb 6600 lb 

0513660 020418064135 3/8 in x 16 ft 25 27 lb 6600 lb 

0513665 020418064159 3/8 in x 20 ft 20 32 lb 6600 lb 

0513667 020418064166 3/8 in x 25 ft 20 39 lb 6600 lb 

0513765 020418178788 1/2 in x 20 ft 20 54 lb 11300 lb 

1306


Grade 70, Binder Chains, Packed in Pail or Vinyl Bag 



■■Standard Finish: Chain Has Yellow Chromated Zinc Electroplate Finish, 

Hooks Are Bright Finish 

■■Chains May Be Used in Accordance with the Latest D.O.T. Regulations 

■■Packaged in Pails or Bags, Order Unit is "Each" 




Cat. No. UPC No. Size/Trade Size Packaging Weight Each (lbs.) Working Load Limit Shelf Pack Qty. 



T0513678 020418237782 3/8 in x 20 ft 3 per Pail 32 lb 6600 lb 3 

Tow Chain 

■■Tow Chains Are Available in High Test or Transport Grade 

■■All Have Forged Clevis Hooks 

■■Tow Chains Are Subject to Shock Loading and Must Be Inspected Frequently 

■■They Must Be Taken Out of Service When Damaged 

■■Select the Right Chain for the Job According to the Working Load Limits 




Cat. No. UPC No. Size/Trade Size Chain Type Finish Packaging 

Weight 

Each (lbs.) 

Working 

Load Limit 

0231912 020418187681 5/16 in x 12 ft High Test Chain w/Clevis Hooks High Visibility Safety Orange 1/Bag 14 lb 3900 lb 2 

0231916 020418188756 5/16 in x 16 ft High Test Chain w/Clevis Hooks High Visibility Safety Orange 1/Bag 18 lb 3900 lb 2 

0513578 020418175794 5/16 in x 20 ft Transport Chain w/Clevis Hooks Yellow Chromate 1/Bag 22 lb 4700 lb 2 

Shelf Pack 

Qty. 

18 

Tow Cable 

■■Used for Towing, Logging 

■■Galvanized Cable with Zinc Plated Hooks 


■■Eye Slip Hooks Swaged on Each End 



Cat. No. UPC No. Size and Description Working Load Limit Weight Each (lbs.) Shelf Pack Qty. 

5977920 020418205453 5/16 in x 20 ft 1960 lb 5 lb 3 


1307


Pet Tie-Outs 


■■One Chain or Cable Per Clam Shell 

■■Welded Pet Tie-Out Uses 2/0 Welded Chain with Heavy Duty 

Swivel Snaps Each End, Rated for Larger Pets Up to 70 Lbs. 

■■Tie-Out Cable Features Red Vinyl Coating Over Galvanized 

Cable with Swivel Snaps on Each End, Rated for Small to 

Medium Pets Up to 35 Lbs. 

Cat. No. UPC No. Size and Description 

Chain/Cable 

Size Length 

Working 

Load Limit 

Weight Per 

Package Shelf Pack Qty. 

3129907 020418211690 Large Pet Tie-out Chain w/Swivel Snaps Each End 2/0 15 ft 520 lb 3.6 lb 3 

5970820 020418205378 Small to Medium Pet Tie-out Cable w/Swivel Snaps Each End 1/8” 20 ft 150 lb 1.2 lb 3 

Dog Runner and Kennel Chains 


■■Inco Chain with Zinc Plate Finish and Swivel Snaps Each End 

■■One Chain Per Clam Shell 

■■For Small to Medium Pets Up to 35 Lbs. 

Cat. No. UPC No. Chain/Cable Size Length Working Load Limit Weight Per Package Shelf Pack Qty. 

3129504 020418171055 # 2 15 ft 80 lb 1.25 lb 5 

3129507 020418171079 2/0 15 ft 120 lb 2.50 lb 6 


Tie-Out Chains 


■■Double Loop (Inco) Chain with Ring and Swivel Snaps on 

Opposite Ends, Swivel in Center 

■■One Chain Per Clam Shell 

■■For Small to Medium Pets Up to 35 Lbs. 

Cat. No. UPC No. Chain/Cable Size Length Working Load Limit Weight Per Package Shelf Pack Qty. 

3209507 020418171109 2/0 20 ft 120 lb 3.25 lb 3 

• DO NOT EXCEED the working load limits (WLL) for chain, cable orcomponents. 


• DO NOT USE if the chain, cable or components are visibly worn or distorted. 

• DO NOT USE this product with a choker type collar. 

• REMOVE plastic coating from cable where clips, clamps, ferrules or securing 

hardware are attached. 

• Inspect the Dog Run before every use for wear and proper operation. Adjust 

hardware as necessary. Periodically check and retighten clamp nuts. Replace entire 

WARNING 

unit if any parts are worn. 

• Never tie your dog near any object that can cause the dog to become suspended or 

entangled. Always provide sufficient shade and water. 

• Keep your arms and legs clear of the cable when connecting your dog to the cable 

in case the dog lunges. 

• To avoid injuring your dog, maintain constant observation while your dog is tied. 

• Not all dogs can be safely tied out. Your supervision and good judgement 

are required. 

1308


Porch Swing Chain Assembly with Hooks 

■■For Securing Porch Swings to Porch Ceilings 

■■Set Packaged One Pair Per Clam Shell, Includes Hooks for 

Installation 

■■The Rated Working Load Limit is 500Lb / 227Kg Per Pair 


Cat. No. UPC No. Working Load Limit Weight Per Package Shelf Pack Qty. 

0702024 020418064562 500 lb 3.30 lb 5 

■■Hydraulic Chain Cutter 

■■Capacity: 3/8 to 1/2 Non-Hardened Chain 

Chain and Cable Cutters 

Cat. No. UPC No. Type Capacity Weight Each (lbs.) 

7508495 020418135477 Hydraulic Chain Cutter 3/8” High Test 33 lb 

7508595 020418178320 Hydraulic Chain Cutter # 80 3/8” Transport, 1/2” High Test 38 lb 

M7508494 020418208294 Hydraulic Cutter Guard Kit - 1 lb 

18 


1309


Warnings, Cautions, Inspection and Proper Use of Accessories 

Certain precautions and standards of treatment should be observed when using 

Campbell accessories. Proper care will extend the useful life of the product. 

SNAPS,PULLEYS, QUICK AND SPRING LINKS, RINGS AND SWIVELS 

Campbell offers a full line of snap products made from a variety of materials to 

meet the needs of many applications. These products are designed and intended 

for light duty applications. 

Typical and appropriate uses would include pet leashes, ancillary saddlery and 

tack, hanging plants, flagpoles, tarp covers, key rings, gate closures, luggage 

and shoulder bag straps. Snaps are not to be used for overhead lifting, to support 

human weight, for playground or athletic equipment, or as safety devices. 

WARNINGS AND CAUTIONS: 

• The use of accessories is subject to certain hazards that cannot be met by 

mechanical or manufacturing means, but only by the exercise of intelligence, 

care, and common sense. 

• Do not exceed the working load limit of the accessory. 

• Chemically active environments may adversely affect accessories. Do not use in 

highly acidic or caustic environments. Campbell should be contacted if the 

accessory will be exposed to chemically active environments during use. 

• High and low temperatures will affect accessories. Campbell should be 

contacted if temperatures below -20°F (-29°C) or above 200°F (93°C) will be 

experienced. 

• Accessories, such as load binders, used in certain applications are subject 

to governmental regulations. Please follow all Federal, State and/or Local 

Department of Transportation, OSHA, or other applicable standards and 

regulations when using Campbell products. 

• Never field weld or repair accessories. 

• See other specific information under the “Inspection” and “Proper Use” sections. 

PROPER USE 

To protect the users and to prevent damage to the accessories, the following safe 

practices should be followed: 

• Select the accessory suitable for the application and environment. 

• Avoid shock loading. 

• Avoid bending over sharp edges or corners. 

• Avoid twisting. 

• Follow the assembly instructions and cautions and warning on the 

product packaging. 

Purchasers please note that all “Warnings and Cautions” apply to accessories as 

well as all chain, components and fittings. Purchasers are responsible for conveying 

the “Warnings and Cautions” including the “Inspection” and “Proper Use” section 

information to the end user. 

Campbell denies any liability for damage that results from use in excess of the 

working load limit or any abuse or misuse of the product. 

Any questions concerning the use of Campbell products may be directed to your 

Apex Tool Group Sales Representative or Customer Service. 

NOTICE: The product specifications and dimensions are as accurate as possible 

at the time of printing. However, because we are continually improving the quality 

and design of our products, they can change without notice. 

The dimensions and weights are approximate nominal values, and some variation 

will occur. If specific dimensional requirements are necessary for the application, 

please contact your Apex Tool Group Sales Representative or Customer Service. 


INSPECTION 

Regular inspections should be conducted on accessories to detect damage or deterioration 

from use. The accessory should be inspected for any of the below conditions. 

If present, the accessory should immediately be removed from service. 

• Cracks. 

• Excessive nicks or gouges. 

• Excessive wear. The accessory should be removed from service if any 

dimension is worn more than 10% from the original dimension. 

• Stretched, bent, twisted, or distorted parts. 

• Excessive corrosion. 

• Evidence of heat damage. 

• Evidence of field welding. 

• Any other condition which questions the integrity of the accessory. 

1310


Load Binders 

■■To Tighten Chain, Typically for Cargo Securement 

■■Meets U.S. D.O.T. 393.100 -393.102 Requirements for Use with Chain 

■■Lever Type: Allows for Quicker Application of Load 

■■Ratchet Type: Allows for Easier Adjustment of Tension and Greater 

Range of Take-Up 


■■Do Not Use for Overhead Lifting or Hoisting 

Lever Type 

Ratchet Type 

Cat. No. UPC No. Style For Chain Size & Grade Finish Take-Up 

Quantity Per 

Package 

Working 

Load Limit 

Weight 

Each (lbs.) 

6203205 020418178658 Lever Type, Imported 1/4" Gr.30 & Gr.43 Painted Red 2-3/4 in 4 2600 lb 3.40 lb 

6203603 020418086441 Lever Type, Domestic 5/16" Gr.70 to 3/8" Gr.43 Painted Red 4-1/2 in 4 5400 lb 7.50 lb 

6203604 020418187162 Lever Type, Imported 5/16" Gr.70 to 3/8" Gr.43 Painted Red 4-1/2 in 4 5400 lb 8.05 lb 

6203605 020418190247 Lever Type, Domestic 3/8" Gr.70 to 1/2" Gr.43 Painted Red 4-1/2 in Bulk 9200 lb 9.92 lb 

6207504 020418086472 Ratchet Type, Imported 5/16" Gr.70 to 3/8" Gr.43 Painted Red 8 in Bulk 5400 lb 11.00 lb 

6207506 020418228940 Ratchet Type, Imported 5/16" Gr.70 to 3/8" Gr.70 Yellow Chromate 8 in 2 6600 lb 11.00 lb 

6207803 020418189425 Ratchet Type, Imported 3/8" Gr.70 to 1/2" Gr.43 Painted Red 8 in Bulk 9200 lb 9.92 lb 

6207805 020418086489 Ratchet Type, Domestic 3/8" Gr.70 to 1/2" Gr.43 Painted Red 8 in Bulk 9200 lb 12.50 lb 

Cable Pullers 

■■Feature Double Drive Ratchet Wheels 

■■Easy Let-Down Releases and Aircraft-Type, 3/16" Galvanized Cables 

■■Built-in Safety Handle is Designed to Bend if Recommended 

Working Load Limit is Exceeded 

■■Packaged 1 Per Box, with Operating Instructions 

■■CAUTION: Do Not Use Cable Pullers to Lift People or to Lift Loads 

Over People 

Cat. No. UPC No. Draw 

Lift 

Capacity 

Pull 

Capacity 

Weight 

Each 

(lbs.) 

6312035 020418162701 10-1/2 ft 1/2 T 1 T 8.80 lb 1 

6312036 020418162718 6 ft 1 T 2 T 9.50 lb 1 

S Hooks 

Shelf 

Pack 

Qty. 

■■For Attaching Accessories to Chain 

■■After Engaging Chain, Close the "S" Hook to Prevent Disengagement 


■■Standard Finish: Bright (Brt) or Zinc Plated (ZP) 

■■Packaging: 50 Per Carton or 6 Per Bag (Except #120, 2 Per Bag). 10 Bags Per Carton 

■■Order Unit is "Each" 



18 


1311


Trade Size Cat. No. UPC No. Finish Wire Size Inside Length Packaged 

Working Load 

Limit 

Weight Each 

(lbs.) 

20 6102024* 020418084836 Zinc Plated 0.08 in 27/32 in Bagged 16 lb 0.004 lb 50 

40 6104024 020418084911 Zinc Plated 0.134 in 1 in Boxed 42 lb 0.01 lb 50 

40 B5954024 020418154843 Zinc Plated 0.134 in 1 in Bagged 42 lb 0.07 lb 10 

60 6106024 020418084980 Zinc Plated 0.187 in 1-13/16 in Boxed 35 lb 0.04 lb 50 

60 B5956024 020418154850 Zinc Plated 0.187 in 1-13/16 in Bagged 35 lb 0.20 lb 10 



70 6107014 020418085130 Bright 0.219 in 1-13/16 in Boxed 100 lb 0.05 lb 50 




81 6108114 020418085338 Bright 0.250 in 2-1/2 in Boxed 150 lb 0.08 lb 50 





* Packed 50 Pieces per Bag 

S Hooks (continued) 

Shelf Pack 

Qty. 


Repair and Lap Links 

■■Connections for Chain and Attachments 

■■Chain is Inserted, Then Link is Hammered Closed 



■■Packaging: Order Unit is "Each" or "Bag"; All Bags Are Packaged 10 Per Box 



Trade Size Cat. No. UPC No. Packaged 

Quantity Per 

Package Working Load Limit Weight Each (lbs.) Shelf Pack Qty. 

1/8 in x 3/4 in T5950024 020418192807 Bulk, UPC Tag 10 125 lb 0.01 lb 10 

3/16 in x 1 in T5800124 020418258510 Carton 100 240 lb 0.03 lb 100 

3/16 in x 1 in B5950124 020418156540 Bagged 6 240 lb 0.03 lb 10 

3/16 in x 1 in T5950124 020418192623 Bulk, UPC Tag 10 240 lb 0.03 lb 10 

1/4 in x 1-1/4 in 5800324 020418081163 Carton 50 400 lb 0.07 lb 50 

1/4 in x 1-1/4 in B5950324 020418156557 Bagged 4 400 lb 0.07 lb 10 

1/4 in x 1-1/4 in T5950324 020418192593 Bulk, UPC Tag 10 400 lb 0.07 lb 10 


5/16 in x 1-1/2 in B5950724 020418156571 Bagged 2 700 lb 0.10 lb 10 




3/8 in x 2 in 5801024 020418081484 Carton 50 1250 lb 0.20 lb 50 


1312


Cold Shuts 

■■Connections for Chain and Attachments 

■■When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size 

■■With A Hammer, Drive the Open End Through the Cold Shut Eye 

■■Peen the Extended End to Prevent Opening 

■■Standard Material: Mild Steel 



■■Note: Cold Shuts Should Not Be Reused After Closure Has Been Made 



Trade Size Cat. No. UPC No. Inside Length Inside Width Working Load Limit Weight Each (lbs.) Shelf Pack Qty. 

3/16 in T4900324 020418180118 15/16 in 11/32 in 400 lb 0.02 lb 10 

1/4 in T4900424 020418180125 1-3/16 in 3/8 in 800 lb 0.06 lb 10 

5/16 in T4900524 020418201448 1-3/8 in 7/16 in 1300 lb 0.10 lb 10 

3/8 in T4900624 020418201455 1-1/2 in 5/8 in 1900 lb 0.16 lb 10 

1/2 in T4900824 020418201462 1-7/8 in 3/4 in 3700 lb 0.38 lb 10 

Double Clevises 


■■For Use with Proof Coil or High Test Chain 


■■UPC Tagged 




Trade Size Cat. No. UPC No. Finish A Dim. B Dim. C Dim. D Dim. 

Working 

Load Limit 

Weight Each 

(lbs.) 

1/4 in x 5/16 in T5423300 020418191534 Zinc Plated 7/16 in 1-1/16 in 2-1/2 in 3/8 in 3900 lb 0.36 lb 10 

3/8 in T5423301 020418191541 Zinc Plated 1/2 in 1-5/16 in 2-27/32 in 7/16 in 5400 lb 0.55 lb 10 

7/16 in x 1/2 in T5423302 020418204869 Zinc Plated 5/8 in 1-5/8 in 3-5/8 in 9/16 in 9200 lb 1.04 lb 5 

Yellow Chromate Hitch Pins 


■■Standard Finish: Zinc Plate with Yellow Chromate 

■■Includes Hair Pin Clip 



Cat. No. UPC No. Pin Diameter Useable Length Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

T3899733 020418257421 3/8 in 3 in 0.20 lb 5 40 

T3899724 020418257414 1/2 in 4-1/4 in 0.36 lb 5 40 

T3899720 020418210952 5/8 in 4 in 0.60 lb 4 40 

T3899752 020418210990 5/8 in 6 in 0.80 lb 4 40 

T3899728 020418210969 3/4 in 4-1/4 in 1.00 lb 4 40 

T3899760 020418211003 3/4 in 6-1/4 in 1.10 lb 4 40 

T3899736 020418210976 7/8 in 4-1/4 in 1.20 lb 2 20 

T3899768 020418211010 7/8 in 6-1/2 in 1.50 lb 2 20 

T3899744 020418210983 1 in 4-1/2 in 1.60 lb 2 20 

T3899776 020418211027 1 in 6-3/4 in 2.10 lb 2 20 

Shelf Pack 

Qty. 

18 


1313


Red Handle Hitch Pins 

■■Forged, Heated Treated, Grade 5 Strength 

■■Pin Has Black Powder Coating with A Red Vinyl Coated Head 

and Handle with Yellow Zinc Plated Hair Pin Clip 



Cat. No. UPC No. Pin Diameter Useable Length Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

T3898910 020418257490 1/2 in 3-5/8 in 0.49 lb 5 20 

T3898954 020418257483 5/8 in 4 in 0.67 lb 5 20 

T3898956 020418257476 5/8 in 5-1/2 in 0.79 lb 5 20 

T3898934 020418257452 3/4 in 4-1/2 in 1.04 lb 2 10 

T3898936 020418257469 3/4 in 6-1/2 in 1.27 lb 2 10 

T3898976 020418257445 7/8 in 6-1/2 in 1.74 lb 1 5 

T3898917 020418257438 1 in 7-1/2 in 2.38 lb 1 5 

Hitch Pin Clips 

■■Replacement Clips for Hitch Pins 

■■Yellow Zinc Plated for Corrosion Resistance 

■■Order Unit is "Bag" 


Trade Size Cat. No. UPC No. Fits Pin Dia. (in.) Wire Size I.D. Of Eye Overall Length 

Pieces Per 

Package 

Weight Each 

(lbs.) 

1/16 in B3899816 020418257513 3/8 in 0.077 in 7/16 in 1-3/4 in 10 0.06 lb 10 

3/32 in B3899832 020418257520 3/8 in 0.099 in 1/2 in 2 in 10 0.09 lb 10 

1/8 in B3899818 020418257537 1/2 in 0.11 in 3/4 in 3 in 10 0.15 lb 10 

5/32 in B3899852 020418257544 1/2 in & 5/8 in 0.15 in 3/4 in 3-1/8 in 7 0.23 lb 10 

3/16 in B3899836 020418257551 3/4 in & 7/8 in 0.188 in 1 in 4 in 5 0.34 lb 10 

1/4 in B3899814 020418257568 1 in 0.23 in 1-1/4 in 5 in 2 0.26 lb 10 


■■Standard Finish: Electro-Galvanized 

■■T-Handle Pin Included 




Straight and Twisted Clevises 

Shelf Pack 

Qty. 

Cat. No. UPC No. Body Type Body Diameter Pin Diameter Working Load Limit Weight Each (lbs.) Shelf Pack Qty. 

T3899910 020418211775 Straight, Short 7/8 in 3/4 in 16000 lb 2.97 lb 5 

T3899913 020418211768 Twisted, Short 7/8 in 3/4 in 16000 lb 2.97 lb 3 

T3899916 020418211799 Straight, Long 7/8 in 3/4 in 16000 lb 3.30 lb 2 

T3899919 020418211782 Twisted, Long 7/8 in 3/4 in 16000 lb 3.30 lb 2 

1314


Utility Clevises 


■■Blue Powder Coat Finish 


■■Working Load Limit Marked on Clevis Body 



Trade Size Cat. No. UPC No. Style Finish 

Working Load Limit 

(Short Tons) Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

1/4 in T9420405 020418257292 Round Pin Super Blue 1/2 T 0.10 lb 10 100 

5/16 in T9420505 020418257285 Round Pin Super Blue 3/4 T 0.17 lb 10 100 

3/8 in T9420605 020418257278 Round Pin Super Blue 1 T 0.27 lb 10 100 

7/16 in T9420705 020418257254 Round Pin Super Blue 1-1/2 T 0.38 lb 5 50 

1/2 in T9420805 020418257247 Round Pin Super Blue 2 T 0.60 lb 5 50 

5/8 in T9421005 020418257261 Round Pin Super Blue 3-1/4 T 1.17 lb 1 25 

Farm Clevises 


■■Blue Powder Coat Finish 


■■Working Load Limit Marked on Clevis Body 



Trade Size Cat. No. UPC No. Style Finish 


(Short Tons) 

Weight Each 

(lbs.) Shelf Pack Qty. Case Pack Qty. 

1/4 in T9640405 020418257407 Screw Pin Super Blue 1/2 T 0.10 lb 10 100 

5/16 in T9640505 020418257391 Screw Pin Super Blue 3/4 T 0.18 lb 10 100 

3/8 in T9640605 020418257384 Screw Pin Super Blue 1 T 0.30 lb 10 100 

7/16 in T9640705 020418257377 Screw Pin Super Blue 1-1/2 T 0.40 lb 5 50 

1/2 in T9640805 020418257360 Screw Pin Super Blue 2 T 0.63 lb 5 50 




1 in T9641605 020418257322 Screw Pin Super Blue 8-1/2 T 4.93 lb 1 5 

1-1/8 in T9641805 020418257315 Screw Pin Super Blue 9-1/2 T 6.79 lb 1 5 

1-1/4 in T9642005 020418257308 Screw Pin Super Blue 12 T 9.93 lb 1 5 

Welded Rings 

■■Made of Low Carbon Steel 

■■General Attachment for Chain or Rope 

■■Standard Finish: Bright (Brt) or Zinc Plated (ZP) 




18 


1315


Welded Rings (continued) 

Trade Size Cat. No. UPC No. Inside Dia. Finish Working Load Limit Weight Each (lbs.) Shelf Pack Qty. 

3/16 in 6050314 020418083518 1-1/4 in Bright 200 lb 0.03 lb 25 

3/16 in 6050324 020418083532 1-1/4 in Zinc Plated 200 lb 0.03 lb 25 


1/4 in 6050424 020418083570 1-1/2 in Zinc Plated 450 lb 0.08 lb 25 

1/4 in 6052414 020418083914 2 in Bright 350 lb 0.10 lb 25 



3/8 in 6050624 020418083679 2 in Zinc Plated 900 lb 0.20 lb 25 




Seven Seas Welded Rings 

■■Made of Low Carbon Steel 

■■For Use in the Construction of Scallop Dredge Nets 

■■Order Unit is "Pound" 



Trade Size Cat. No. UPC No. Inside Dia. Pounds Per Pail Pieces Per Package Working Load Limit Shelf Pack Qty. 

1/4 in 6052418* 020418083938 2 in 50 lb 500 350 lb 50 

7/16 in 6055888~* 020418184512 3-1/2 in 50 lb 100 - 50 

7/16 in 6055988~* 020418193521 4 in 50 lb 80 - 50 

* Pieces per Package is Approximate; ~ Case Hardened 

Seven Seas Net Links 

■■Shaped to Facilitate Uniform Closing 

■■Links Are Heat Treated 

■■Provide the Hardness and Strength Required for Deep Sea Scallop Dredging 

■■Order Unit is "Pound" 

Trade Size Cat. No. UPC No. Wire Size Inside Length Pounds Per Pail Pieces Per Package Shelf Pack Qty. 

719 6010898* 020418083440 3/8 in 1-1/8 in 50 lb 375 50 

719-S 6011898* 020418189418 3/8 in 1 in 50 lb 500 50 

* Pieces per Package is Approximate 

1316


■■For General Chain & Rope Attachment 




Welded Rings (Imported) 

Figure 

No. 

Trade 

Size Cat. No. UPC No. Style Finish A Dim. B Dim. 

Working 

Load Limit 

Weight 

Each (lbs.) 

Shelf Pack 

Qty. 

7 1 in T7665012 020418201301 Steel Ring Nickel Plated 1.00 in 0.18 in 200 lb 0.03 lb 10 100 

7B 1-1/8 in T7662114 020418201288 Solid Bronze Ring Polished 1.125 in 0.21 in 150 lb 0.04 lb 10 100 

4 1-1/4 in T7660841 020418192845 Steel Ring Zinc Plated 1.25 in 0.22 in 200 lb 0.05 lb 10 100 

7 1-1/4 in T7665032 020418201318 Steel Ring Nickel Plated 1.25 in 0.18 in 200 lb 0.03 lb 10 100 

3 1-1/2 in T7665042 020418201325 Steel Ring Nickel Plated 1.50 in 0.24 in 200 lb 0.05 lb 10 100 


7B 2 in T7662154 020418192050 Solid Bronze Ring Polished 2.00 in 0.25 in 150 lb 0.12 lb 10 100 

- 2 in T7663550 020418211898 

Hitch Ring with 

3-1/2" Screw Eye 

Case Pack 

Qty. 

Zinc Plated 2.00 in 0.26 in 90 lb 0.21 lb 5 50 


2 2-1/2 in T7661361 020418192043 Steel Ring Zinc Plated 2.50 in 0.26 in 200 lb 0.14 lb 10 100 

Dees 

■■Used to Attach a Strap to an Accessory 

■■Standard Finish: Zinc, Nickel, Polished 



18 

Figure 

No. Trade Size Cat. No. UPC No. Finish A Dim. B Dim. C Dim. 

Working 

Load Limit 

Weight 

Each (lbs.) 

Shelf Pack 

Qty. 

3250 1 in T7662322 020418204821 Nickel Plated 1.00 in 0.21 in 0.81 in 200 lb 0.03 lb 10 100 

3250 1-1/4 in T7662342 020418192067 Zinc Plated 1.25 in 0.24 in 1.125 in 200 lb 0.07 lb 10 100 

3250 1-1/2 in T7662351 020418192074 Zinc Plated 1.50 in 0.24 in 1.50 in 200 lb 0.08 lb 10 100 

3250 2 in T7662372 020418204845 Nickel Plated 2.00 in 0.26 in 1.75 in 200 lb 0.11 lb 10 100 

Open Eye Swivels 

■■Used to Couple Weldless Chain, Prevents Tangling 

■■Eyes Easily Closed with Hammer 



Case Pack 

Qty. 


Size No. Cat. No. UPC No. For Chain Size Working Load Limit Weight Each (lbs.) Shelf Pack Qty. 

1020 T5901024 020418192852 1/0 & 2/0 Inco (Double Loop) 100 lb 0.05 lb 10 

1317


Double End Swivels 

■■Used for Connecting Chain or Rope 

■■Swivel Feature Allows for Less Kinking or Tangling of Chain 

■■Zinc Die Cast Construction 



Figure 

No. 

Trade 

Size Cat. No. UPC No. Finish Eye Size Length 

Working 

Load Limit 

Weight Each 

(lbs.) 

Shelf Pack 

Qty. 

2225Z 5/8 in T7640302 020418191930 Nickel Plated 5/8 2-11/16 in 90 lb 0.08 lb 10 100 

2225Z 3/4 in T7616202 020418191831 Nickel Plated 3/4 3 in 100 lb 0.08 lb 10 100 

2225Z 1 in T7640322 020418191947 Nickel Plated 1 3-9/16 in 100 lb 0.18 lb 10 100 

Case Pack 

Qty. 

Tie Out Stake 

■■Spiral Tie Out Stake 

■■Finish: Zinc Plated 

■■For Pets or Other Animals 

Figure No. Trade Size Cat. No. UPC No. Finish Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

1949 15-1/2 in 7692006 020418144936 Zinc Plated 0.90 lb 1 25 


Gatehook 

■■Gate Hook, Reverse Eye, with Steel Staples (2) 

■■Packaged in Retail Polybag 

Figure No. Trade Size Cat. No. UPC No. Finish A Dim. B Dim. C Dim. 

Weight Each 

(lbs.) 

Shelf Pack 

Qty. 

444 3/8 in B7606601 020418156724 Zinc Plated 3/8 in 4 in 1/4 in 0.16 lb 10 100 

Case Pack 

Qty. 

1318


Malleable Iron and Steel Snaps 

■■Typical uses include Tarp Covers, Key Rings, 

Gate Closures, Flagpoles, and Other Home, Farm, 

Recreational and Marine Applications 

■■Also Ideal for Pet Leashes and Tie-Outs 



Figure 

No. 

Trade 

Size Cat. No. UPC No. Style Finish A Dim. B Dim. C Dim. 

125 5/8 in T7600311 020418191558 

Rigid, Round Eye Bolt 

Snap 

161 3-1/2 in T7605501 020418201028 

Double Ended Bolt 

Snap 

162 4-1/8 in T7605511 020418191671 


Snap 

163 4-3/4 in T7605521 020418191688 


Snap 

200 3/4 in T7600511 020418201004 

Rigid, Strap Eye Spring 

Snap 

200 1 in T7600531 020418201011 


Snap 

200 1-1/2 in T7600561 020418192821 

222 3/4 in T7605701 020418192814 

225 1/2 in T7601201 020418191565 

225 5/8 in T7605801 020418191695 

225 3/4 in T7605811 020418191701 

225 1 in T7605821 020418191718 

226 1 in T7601311 020418191572 

230 3/8 in T7606001 020418201035 

231 3/8 in T7606011 020418191725 

232 1/2 in T7606021 020418191732 

240 1/2 in T7606031 020418191749 

245 1/2 in T7601451 020418191589 

250 5/8 in T7601461 020418191596 


Snap 

Swiveling, Round Eye 

Spring Snap 


Bolt Snap 


Bolt Snap 


Bolt Snap 


Bolt Snap 

Swiveling, Open Eye 

Bolt Snap 

Rigid, Open Eye Bolt 

Snap 


Snap 


Snap 


Snap 


Snap 


Snap 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

Zinc Plated 5/8 in 5 in 11/32 in 70 lb 0.14 lb 10 100 

Zinc Plated - 3-1/2 in 9/32 in 70 lb 0.10 lb 10 100 




Zinc Plated 1 in 3-1/4 in 7/16 in 90 lb 0.10 lb 10 100 

Zinc Plated 

1-1/2 in 

3-13/16 

in 

1/2 in 80 lb 0.10 lb 10 100 

Zinc Plated 3/4 in 3-3/4 in 7/16 in 70 lb 0.12 lb 10 100 












18 


1319


Malleable Iron and Steel Snaps 








Figure Trade 

No. Size Cat. No. UPC No. Style Finish A Dim. B Dim. C Dim. 

333 7/8 in T7601801 020418191602 


Animal Snap 

334 3/8 in T7601912 020418191619 

334 1/4 in T7606102 020418201042 

341 3/8 in T7602301 020418192630 

407 3/4 in T7606301 020418201059 

Swiveling, Round Eye Spring 

Snap 


Snap 

Rigid, Round Eye Spring 

Snap 


Snap 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 


Nickel 

Plated 

Nickel 

Plated 

3/8 in 2 in 5/32 in 20 lb 0.02 lb 10 100 

1/4 in 1-7/8 in 5/32 in 20 lb 0.02 lb 10 100 



424 2-1/2 in T7602611 020418191626 Breaching Snap Zinc Plated - 2-1/2 in 9/32 in 80 lb 0.06 lb 10 100 

437 3/8 in T7606502 020418191756 


Snap 

Nickel 

Plated 

3/8 in 2-1/2 in 7/32 in 30 lb 0.04 lb 10 100 

822 5/8 in T7603211 020418204555 Rigid, Round Eye Cap Snap Zinc Plated 5/8 in 5 in 9/16 in 320 lb 0.32 lb 10 100 

830 1 in T7603441 020418191640 

Swiveling, Round Eye Cap 

Snap 


830 3/4 in T7606801 020418201066 

Swiveling, Round Eye Cap 

Snap 


855 5-1/4 in T7603911 020418193712 Double Ended Cap Snap Zinc Plated - 5-1/4 in 7/16 in 250 lb 0.26 lb 10 100 

1001 1/2 in T7604002 020418191657 Rigid, Round Eye Panic Snap Zinc Plated 1/2 in 4 in - 140 lb 0.31 lb 10 100 

1405 2-7/8 in T7607306 020418192838 

Swiveling, Open Eye Spring 

Snap 


1407 3-3/4 in T7607301 020418201073 


Snap 


2311F 3/4 in T7620934 020418238130 Latched, Snap Hook Zinc Plated 3/4 in 4 in 7/8 in 750 lb 0.33 lb 10 100 

3142 7/8 in T7607401 020418191763 


Animal Snap 


3369 5/8 in T7620794 020418204609 Rigid, Fixed Eye Hook Zinc Plated 5/8 in 3-5/8 in 9/16 in 1000 lb 0.33 lb 10 100 

5013 5/8 in T7604622 020418191664 

5013 3/8 in T7607502 020418191770 

5025 3/8 in T7607602 020418191787 

5037 3/8 in T7607702 020418201080 

Swiveling, Strap Eye Trigger 

Snap 


Trigger Snap 

Swiveling, Round Eye Bolt 

Snap 


Snap 

Nickel 

Plated 

Nickel 

Plated 

Nickel 

Plated 

Nickel 

Plated 

5/8 in 2-1/2 in 3/8 in 70 lb 0.09 lb 10 100 

3/8 in 2-1/2 in 3/8 in 70 lb 0.09 lb 10 100 

3/8 in 2-7/8 in 5/16 in 60 lb 0.07 lb 10 100 

3/8 in 2-1/2 in 7/32 in 30 lb 0.04 lb 10 100 

1320


Die Cast Zinc Snaps 





■■Zinc Die Cast Construction 



Figure Trade 

No. Size Cat. No. UPC No. Style Finish A Dim. B Dim. C Dim. 

017Z 1 in T7610102 020418201097 

Swiveling, Strap Eye Bolt 

Snap 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

Nickel Plated 1 in 3-3/16 in 3/8 in 80 lb 0.10 lb 10 100 

25Z 1 in T7615102 020418191794 Rigid, Strap Eye Bolt Snap Nickel Plated 1 in 3-1/16 in 3/8 in 40 lb 0.09 lb 10 100 

125Z 5/8 in T7615202 020418201127 Rigid, Round Eye Bolt Snap Nickel Plated 5/8 in 3-3/8 in 3/8 in 90 lb 0.08 lb 10 100 

162Z - T7615302 020418201134 Double Ended Bolt Snap Nickel Plated - 4 in 3/8 in 60 lb 0.11 lb 10 100 

163Z - T7615312 020418191800 Double Ended Bolt Snap Nickel Plated - 4-5/8 in 7/16 in 70 lb 0.15 lb 10 100 

225Z 1/2 in T7615012 020418201110 


Snap 

Nickel Plated 1/2 in 3-1/2 in 3/8 in 90 lb 0.09 lb 10 100 

225Z 5/8 in T7615402 020418201141 


Snap 


225Z 3/4 in T7615412 020418201158 


Snap 


225Z 1 in T7615422 020418201165 


Snap 


251Z 1 in T7610832 020418201103 

Swiveling, Round Eye Quick 

Snap 


251Z 5/8 in T7615502 020418191817 


Snap 


334Z 1/4 in T7615602 020418191824 


Spring Snap 

Nickel Plated 1/4 in 2 in 7/32 in 20 lb 0.02 lb 10 100 

435Z 5/8 in T7615802 020418201172 

Swiveling, Strap Eye Spring 

Snap 


437Z 3/8 in T7615902 020418201189 


Spring Snap 


3142Z 7/8 in T7616302 020418191848 


Animal Snap 


5013Z 3/8 in T7616402 020418193538 


Trigger Snap 


5013Z 1/2 in T7616412 020418179723 


Trigger Snap 


5015Z 3/4 in T7616602 020418191855 


Trigger Snap 

Nickel Plated 3/4 in 4 in 9/16 in 90 lb 0.15 lb 10 100 

5025Z 3/8 in T7616702 020418201196 


Snap 


18 


1321


Solid Bronze Snaps 








Figure 

No. 

Trade 


161B - T7625004 020418201226 Double Ended Bolt Snap Polished - 3-13/32 in 5/16 in 60 lb 0.10 lb 10 100 

163B - T7625014 020418201233 Double Ended Bolt Snap Polished - 4-1/2 in 13/32 in 100 lb 0.18 lb 10 100 

225B 1-1/4 in T7620334 020418191862 


Snap 

Polished 1-1/4 in 4-3/4 in 19/32 in 120 lb 0.30 lb 10 100 

225B 5/8 in T7625104 020418191886 


Snap 

Polished 5/8 in 3-1/8 in 3/8 in 70 lb 0.12 lb 10 100 

225B 3/4 in T7625114 020418179785 


Snap 


225B 1 in T7625124 020418191893 


Snap 

Polished 1 in 3-17/32 in 3/8 in 90 lb 0.10 lb 10 100 

231B 3/8 in T7625204 020418179792 Rigid, Open Eye Bolt Snap Polished 3/8 in 3-13/32 in 3/8 in 70 lb 0.15 lb 10 100 

249B 3/4 in T7620534 020418201202 Rigid, Round Eye Quick Snap Polished 3/4 in 3-15/64 in 9/16 in 140 lb 0.28 lb 10 100 




251B 11/16 in T7620614 020418201219 


Snap 


251B 5/8 in T7625404 020418201264 


Snap 


251B 3/4 in T7625434 020418201271 


Snap 


2311B 3/4 in T7620804 020418191879 Latched, Snap Hook Polished 3/4 in 4-1/16 in 5/8 in 140 lb 0.29 lb 10 100 

5013B 1/2 in T7625504 020418191909 

Swiveling, Round Eye Trigger 

Snap 


5025B 3/8 in T7625604 020418191916 


Snap 


5025B 1/2 in T7625614 020418191923 


Snap 


Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

1322


Stainless Steel Snaps 







Figure 

No. 

Trade 


162S - T7631204 020418201332 


Snap 

225S 1/2 in T7631304 020418179907 


Bolt Snap 

225S 3/4 in T7631324 020418201349 


Bolt Snap 

249S 3/8 in T7631404 020418204647 

Rigid, Round Eye 

Quick Snap 

249S 5/8 in T7631414 020418201356 


Quick Snap 

249S 3/4 in T7631434 020418201363 


Quick Snap 

251S 11/16 in T7631524 020418193514 


Quick Snap 

251S 3/4 in T7631534 020418201370 


Quick Snap 

Working 

Load Limit 

Weight 

Each (lbs.) 

Shelf 

Pack Qty. 

Case 

Pack Qty. 

Polished - 4 in 3/8 in 130 lb 0.14 lb 10 100 








2311S 3/4 in T7631604 020418201387 Latched, Snap Hook Polished 3/4 in 4-1/16 in 5/8 in 400 lb 0.23 lb 10 100 

2311S 1-1/8 in T7631614 020418201394 Latched, Snap Hook Polished 1-1/8 in 4-21/32 in 23/32 in 400 lb 0.34 lb 10 50 

5013S 1/2 in T7631704 020418201400 


Polished 

Trigger Snap 

1/2 in 2-15/32 in 7/16 in 80 lb 0.10 lb 10 100 

5025S 1/2 in T7631804 020418179983 


Polished 

Bolt Snap 

1/2 in 2-15/16 in 1/4 in 50 lb 0.08 lb 10 100 

Aluminum Spring Snap Link 

■■Aluminum Spring Snap 

■■Shipped in Assorted Colors 



■■Do Not Use to Support Human Weight, for Playground or Athletic 

Equipment, or as a Safety Device 

Inside Inside Overall Working Weight Shelf Pack Case Pack 

Trade Size Cat. No. UPC No. Finish Opening Length Width Length Load Limit Each (lbs.) Qty. Qty. 

5/16 in T7645000 020418206092 Various 0.50 in 2.50 in 1.125 in 3.125 in 75 lb 0.05 lb 10 100 

18 


1323


Spring Snap Links 

■■Ideal for Hanging Keys and Other Utility Items From Belt 

■■Fast and Easy to Connect and Disconnect 







Figure 

No. 

Trade 

Size Cat. No. UPC No. Finish 

Mat. 

Dia. (A) 

Length 

(B) 

Opening 

(C) 

Eye Dia. 

(D) 

Inside 

Width 

(E) 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf Pack 

Qty. 

2450 1/4 in T7645006 020418201585 Zinc Plated 0.19 in 1.93 in 0.26 in 0.32 in 0.26 80 lb 0.03 lb 10 100 







2450 1 in T7645074 020418204777 Zinc Plated 0.46 in 5.48 in 0.87 in 0.72 in 0.50 400 lb 0.59 lb 10 50 

Case Pack 

Qty. 


Quick Links 

■■For Fast and Easy Connections Between Two Lengths of Chain 







Figure 

No. 

Trade 


Mat. 

Dia. 

(A) 

Length 

(B) 

Opening 

(C) 

Inside 

Length 

(D) 

Inside 

Width 

(E) 

Working 

Load Limit 

Weight 

Each 

(lbs.) 

Shelf Pack 

Qty. 

7350 1/8 in T7645106 020418201646 Zinc Plated 0.13 in 1.40 in 0.20 in 1.16 in 0.40 in 220 lb 0.02 lb 10 100 






Case Pack 

Qty. 

1324


Stainless Steel Spring Snap Links 

■■Ideal for Hanging Keys and Other Utility Items From Belt 

■■Fast and Easy to Connect and Disconnect 

■■Standard Material: Stainless Steel 






Figure 

No. 

Trade 


Mat. 

Dia. (A) 

Length 

(B) 

2450 1/4 in T7630406 020418193415 Polished 0.226 in 2.38 in 0.34 in 0.37 in 0.29 in 160 lb 0.06 lb 10 100 





Opening 

(C) 

Eye Dia. 

(D) 

Inside 

Width 

(E) 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

Stainless Steel Quick Links 

■■For Fast and Easy Connections Between Two Lengths of Chain 

■■Standard Material: Stainless Steel 






Figure 

No. 

Trade 


Mat. 

Dia. (A) 

Length 

(B) 






Die Cast Zinc Pulleys 

■■Features One Piece Cast Construction and Triple Copper/Nickel Plating 

■■Solid Brass or Brass Plated Sheaves 

■■For Rope Applications in Awnings, Flagpoles and Other Light Duty Applications 



■■Do Not Use to Support Human Weight, for Playground or Athletic Equipment, 

or as a Safety Device 

Opening 

(C) 

Inside 

Length 

(D) 

Inside 

Width 

(E) 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

18 


1325


Figure 

No. 

Die Cast Zinc Pulleys (continued) 

Trade 

Size Cat. No. UPC No. Style Finish 

0173 1/2 in T7655052 020418191978 Swivel Eye, Single Sheave Nickel Plated 3/16 1/2 in 5/16 in 25 lb 0.06 lb 10 100 

0174 1/2 in T7655062 020418191985 Rigid Eye, Single Sheave Nickel Plated 3/16 1/2 in 3/16 in 30 lb 0.05 lb 10 100 

0173 3/4 in T7655002 020418179990 Swivel Eye, Single Sheave Nickel Plated 1/4 in 3/4 in 5/16 in 25 lb 0.05 lb 10 100 

0174 3/4 in T7655100 020418201417 Rigid Eye, Single Sheave Nickel Plated 1/4 in 3/4 in 3/16 in 30 lb 0.06 lb 10 100 

0176 3/4 in T7655202 020418201424 Rigid Eye, Double Sheave Nickel Plated 1/4 in 3/4 in 3/16 in 40 lb 0.10 lb 10 100 

0173 1 in T7655012 020418180002 Swivel Eye, Single Sheave Nickel Plated 5/16 in 1 in 5/16 in 30 lb 0.13 lb 10 100 

0174 1 in T7655112 020418180040 Rigid Eye, Single Sheave Nickel Plated 5/16 in 1 in 7/32 in 55 lb 0.12 lb 10 100 

0176 1 in T7655212 020418201431 Rigid Eye, Double Sheave Nickel Plated 5/16 in 1 in 7/32 in 55 lb 0.20 lb 10 100 

0178 1 in T7655312 020418180101 Swivel Eye, Double Sheave Nickel Plated 5/16 in 1 in 5/16 in 25 lb 0.24 lb 10 100 

0173 1-1/4 in T7655022 020418180019 Swivel Eye, Single Sheave Nickel Plated 3/8 in 1-1/4 in 5/8 in 50 lb 0.30 lb 10 100 

0174 1-1/4 in T7655120 020418180057 Rigid Eye, Single Sheave Nickel Plated 3/8 in 1-1/4 in 3/8 in 110 lb 0.28 lb 10 100 

0173 1-1/2 in T7655032 020418191961 Swivel Eye, Single Sheave Nickel Plated 3/8 in 1-1/2 in 5/8 in 50 lb 0.30 lb 10 50 

0174 1-1/2 in T7655132 020418191992 Rigid Eye, Single Sheave Nickel Plated 3/8 in 1-1/2 in 3/8 in 110 lb 0.27 lb 10 50 

0176 1-1/2 in T7655222 020418192005 Rigid Eye, Double Sheave Nickel Plated 3/8 in 1-1/2 in 3/8 in 90 lb 0.44 lb 10 50 

0173 2 in T7655042 020418180026 Swivel Eye, Single Sheave Nickel Plated 1/2 in 2 in 5/8 in 55 lb 0.47 lb 10 50 

0174 2 in T7655142 020418180064 Rigid Eye, Single Sheave Nickel Plated 1/2 in 2 in 15/32 in 125 lb 0.50 lb 10 50 

Rope 

Size 

Sheave 

Size - 

OD 

Eye Size 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 


Heavy Duty Steel Pulleys 

■■Steel Body and Die-Cast Zinc Sheave 

■■Zinc Plated to Protect Against Rust and Corrosion 

■■Powder Metal Bushing to Extend Pulley Life and Provide Smooth Operation 

■■For Rope Up to 3/8" or 1/2" As Noted 

■■Working Load Limit Stamped on Pulley Body 

■■For Indoor or Outdoor Use 

■■Mount Wall and Ceiling Pulleys with 4D or 6D Nails or #4 X 3/4" Screws 



Trade 

Size Cat. No. UPC No. Style Finish 

Rope 

Size 

Sheave 

Size - OD 

Working 

Load Limit 

Weight Each 

(lbs.) 

Shelf Pack 

Qty. 

1-1/2 in T7550301 020418193361 Swivel Eye, Single Sheave Zinc Plated 3/8 in 1-1/2 in 420 lb 0.32 lb 5 50 

1-1/2 in T7550401 020418193392 Fixed Eye, Single Sheave Zinc Plated 3/8 in 1-1/2 in 420 lb 0.18 lb 5 50 

1-1/2 in T7550421 020418193385 Fixed Eye, Double Sheave Zinc Plated 3/8 in 1-1/2 in 400 lb 0.30 lb 5 50 

1-1/2 in T7550501 020418300028 Wall/Ceil Mount, Single Sheave Zinc Plated 3/8 in 1-1/2 in 100 lb 0.33 lb 5 50 

2 in T7550302 020418193378 Swivel Eye, Single Sheave Zinc Plated 3/8 in 2 in 480 lb 0.22 lb 5 50 

2 in T7550402 020418193408 Fixed Eye, Single Sheave Zinc Plated 3/8 in 2 in 480 lb 0.26 lb 5 50 

2 in T7550502 020418300011 Wall/Ceil Mount, Single Sheave Zinc Plated 3/8 in 2 in 100 lb 0.46 lb 5 50 

2 in T7551522 020418300004 Joist Mount, Single Sheave Zinc Plated 3/8 in 2 in 100 lb 0.45 lb 5 50 

2-1/2 in T7550303 020418206085 Swivel Eye, Single Sheave Zinc Plated 3/8 in 2-1/2 in 550 lb 0.62 lb 5 25 

2-1/2 in T7550403 020418300035 Fixed Eye, Single Sheave Zinc Plated 3/8 in 2-1/2 in 550 lb 0.70 lb 5 25 

3 in T7550304 020418300059 Swivel Eye, Single Sheave Zinc Plated 1/2 in 3 in 650 lb 1.05 lb 5 25 

3 in T7550404 020418300042 Fixed Eye, Single Sheave Zinc Plated 1/2 in 3 in 650 lb 1.03 lb 5 25 

Case Pack 

Qty. 

1326


Rope Clamps 

■■Used to Create Loop End Termination on Fiber Rope 


Cat. No. UPC No. Style Finish Rope Size Packaged 

Weight Each 


B7679034 020418157189 Rope Clamp, 2 per Bag Zinc Plated 1/2 in Bagged 0.10 lb 10 100 

B7679035 020418157196 Rope Clamp & Thimble Zinc Plated 1/4 in - 3/8 in Bagged 0.09 lb 10 100 

Rope Cleats 

■■For Fastening Rope for Boats, Awnings, Etc. 


Figure No. Trade Size Cat. No. UPC No. Finish Length Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

4015 2-1/2 in T7655402 020418192012 Nickel Plated 2-1/2 in 0.04 lb 10 100 

4015 2-1/2 in T7655404 020418193354 Brass 2-1/2 in 0.03 lb 10 100 

4015 4-1/2 in T7655412 020418192029 Nickel Plated 4-1/2 in 0.08 lb 10 100 

4015 6 in T7655422 020418193347 Nickel Plated 6 in 0.14 lb 10 100 

■■Die Cast Construction 

■■Standard Finish: Nickel Plated 

■■For Tying Down Rope to a Surface 

Footman Loops 

18 

Trade Size Cat. No. UPC No. Style Overall Length 

Inside Loop 

Length 

Diameter 

Weight Each 

(lbs.) 

Shelf Pack 

Qty. 

1/2 in T7691800 020418211836 Rope Loop 2-3/4 in 1-3/4 in 1/4 in 0.04 lb 10 100 

1 in T7691801 020418211843 Strap Loop 2-5/8 in 1 in 1/4 in 0.04 lb 10 100 

1-1/4 in T7691802 020418211850 Strap Loop 2-3/4 in 1-3/8 in 1/4 in 0.03 lb 10 100 

1-1/2 in T7691803 020418211867 Strap Loop 3-1/8 in 1-5/8 in 1/4 in 0.04 lb 10 100 

2 in T7691804 020418211829 Strap Loop 3-3/4 in 2-1/8 in 5/16 in 0.06 lb 10 100 

Swaging Tool 

■■For Securing Ferrules and Stops onto Wire Rope or Cable 

■■Do Not Swage on Coated Cable, Remove Coating From the Assembly Area 

■■Read All Assembly and Maintenance Instructions on Tool Package 

■■Designed for Use on 1/16" to 3/16" Sized Ferrules and Stops 

Cat. No. UPC No. Overall Length Weight Each (lbs.) Shelf Pack Qty. 

7679038 020418224010 18 in 5.90 lb 2 

Case Pack 

Qty. 


1327


Ferrules and Stops 

■■Insert Ferrule(s) Onto Cable, Form Loop and Insert Thimble (If Desired) 

■■Use a Proper Swaging Tool (Not a Hammer) to Make Swages. 

■■Match Ferrule, Thimble and Stop Size to Size of Cable 

■■If Used on Coated Cable, Remove the Coating From the Assembly Area 

■■Follow Assembly Instructions Carefully 

■■Made From Aluminum or Copper 


Trade 

Size Cat. No. UPC No. Material 

For Cable 

Dia. Style Packaged 

Weight Each 


1/16 in 7670704 020418166464 Aluminum 1/16 in Ferrules Bulk 0.01 lb 50 250 

1/16 in B7675304 020418157134 Aluminum 1/16 in Ferrules (2) and Stops (2) Bagged 0.01 lb 10 100 

1/16 in B7676304 020418238185 Aluminum 1/16 in Ferrules (2) and Thimbles (2) Bagged 0.05 lb 10 100 

1/16 in T7670904* 020418240720 Copper 1/16 in Ferrules Bulk 0.01 lb 100 1000 















1/4 in T7670754 020418236389 Aluminum 1/4 in Ferrules Bulk 0.03 lb 50 250 


* Copper Ferrules are Zinc Plated 

1328


Wire Rope Clips and Thimbles 

■■Not Recommended for Use on Coated Cable 

■■If Used on Coated Cable, Remove the Coating From the 

Assembly Area 

■■Standard Finish: Electro-Galvanized 

■■Follow Assembly Instructions 

Figure 

No. 

Trade 

Size Cat. No. UPC No. Style Finish Packaged A Dim. B Dim. C Dim. D Dim. 

3300 1/16 in T7670409 020418192586 Wire Rope Clip Galvanized 

3300 

323 

3/32 in - 

1/8 in 

3/32 in - 

1/8 in 

T7670419 020418201691 Wire Rope Clip Galvanized 

T7670609 020418201769 

3300 1/8 in B7675109 020418166846 

3300 3/16 in B7675119 020418166853 

Wire Rope 

Thimble 

Wire Rope 

Clips (2) w/ 

Thimbles (1) 

Wire Rope 

Clips (2) w/ 

Thimbles (1) 

Galvanized 


323 3/16 in T7670619 020418201776 

3300 1/4 in B7675129 020418166860 

Wire Rope 

Thimble 

Wire Rope 

Clips (2) w/ 

Thimbles (1) 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

1/16 in 7/8 in 7/16 in - 0.02 lb 10 100 

3/32 in 

- 1/8 in 

3/32 in 

- 1/8 in 

1 in 1/2 in - 0.03 lb 10 100 

- - 1-3/4 in 0.03 lb 10 100 

Galvanized Bagged 1/8 in 1-1/2 in 1/2 in 1-3/4 in 0.18 lb 10 100 


Galvanized 


323 1/4 in T7670629 020418201783 

Wire Rope 

Thimble 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

3/16 in 1-1/16 in 9/16 in - 0.05 lb 10 100 

3/16 in - - 1-3/4 in 0.02 lb 10 100 


Galvanized 


323 5/16 in T7670639 020418201790 

Wire Rope 

Thimble 

Galvanized 


323 3/8 in T7670649 020418201806 

Wire Rope 

Thimble 

Galvanized 


323 1/2 in T7670659 020418201813 

Wire Rope 

Thimble 

Galvanized 


323 5/8 in T7670669 020418201820 

Wire Rope 

Thimble 

Galvanized 


Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

Bulk, UPC 

Tag 

1/4 in 1-1/2 in 11/16 in - 0.10 lb 10 100 

1/4 in - - 1-7/8 in 0.03 lb 10 100 

5/16 in 1-1/2 in 11/16 in - 0.13 lb 10 100 

5/16 in - - 

2-3/32 

in 

0.04 lb 10 100 

3/8 in 2 in 7/8 in - 0.22 lb 10 10 

3/8 in - - 2-1/4 in 0.06 lb 10 100 

1/2 in 2-1/2 in 1 in - 0.31 lb 5 50 

1/2 in - - 2-1/2 in 0.11 lb 5 50 

5/8 in 2-3/4 in 1-3/16 in - 0.26 lb 5 50 

5/8 in - - 2-7/8 in 0.34 lb 5 50 

3/4 in 3-1/16 in 1-11/32 in - 0.60 lb 5 50 

18 


1329


Stainless Steel Wire Rope Clips & Light Duty Thimbles 

■■Not Recommended for Use on Coated Cable 

■■If Used on Coated Cable, Remove the Coating From the Assembly Area 

■■Follow Assembly Instructions 

■■Standard Material: Cast Stainless Steel 


Trade Size Cat. No. UPC No. Style Finish Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

1/8 in T7633002 020418204692 Wire Rope Clip Polished 0.03 lb 10 100 



1/16 in - 1/8 in T7637502 020418238147 Wire Rope Thimble Polished 0.02 lb 10 100 

3/16 in T7637503 020418204746 Wire Rope Thimble Polished 0.02 lb 10 100 

1/4 in T7637504 020418204753 Wire Rope Thimble Polished 0.02 lb 10 100 

Eye & Eye Swivels (Import) 


■■Galvanized Finish 

■■Swivels Are Designed For Straight Line Pull Only 


■■These Swivels ARE NOT Designed to Swivel Under Load 



Trade 

Size Cat. No. UPC No. Finish A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. 

Working 

Load Limit 

Weight 

Each (lbs.) 

Shelf Pack 

Qty. 

3/16 in T9630335 020418211560 Galvanized 0.20 in 0.70 in 0.81 in 2.52 in 0.62 in 0.64 in 700 lb 0.11 lb 5 50 





■■Carbon Steel 

■■Zinc Plated 




Anchor Shackles, Screw Pin (Import) Consumer Grade 

Case Pack 

Qty. 

Trade Size Cat. No. UPC No. Style Finish Working Load Limit Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

3/16 in T9600335 020418201509 Screw Pin Zinc Plated 100 lb 0.05 lb 10 100 







1 in T9601635 020418201578 Screw Pin Zinc Plated 5000 lb 5.00 lb 2 10 

1330


■■Drop-Forged Carbon Steel 

■■Industrial Grade 


■■WLL Marked on Each Shackle 



Anchor Shackles, Screw Pin (Import) Industrial Grade 

Trade 

Size Cat. No. UPC No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. Finish 

Working 

Load Limit 

(Short Tons) 

Weight 

Each 

(lbs.) 

Shelf 

Pack Qty. 

3/16 in T9640335 020418211706 0.19 in 0.25 in 0.87 in 0.37 in 0.63 in 0.56 in Galvanized 1/3 T 0.06 lb 10 100 



3/8 in T9640635 020418211669 0.38 in 0.43 in 1.44 in 0.67 in 1.00 in 1.05 in Galvanized 1 T 0.32 lb 10 100 

1/2 in T9640835 020418211652 0.50 in 0.62 in 1.86 in 0.86 in 1.30 in 1.20 in Galvanized 2 T 0.69 lb 5 50 

5/8 in T9641035 020418211645 0.62 in 0.75 in 2.44 in 1.06 in 1.56 in 1.52 in Galvanized 3-1/4 T 1.50 lb 1 25 



1 in T9641635 020418211614 1.00 in 1.12 in 3.75 in 1.68 in 2.55 in 2.37 in Galvanized 8-1/2 T 5.20 lb 1 5 

Case Pack 

Qty. 

Tractor Draw Bar Hook 

■■Forged, Heat Treated Steel 

■■Blue Powder Coat Finish on Hook 


■■Can Be Used with 5/16” to 1/2” Grade 30 or Grade 43 Chain 



Trade Size Cat. No. UPC No. Hook Style Finish 

Working Load 

Limit 

Weight Each 


1/2 in T9501805 020418257575 Clevis Super Blue 9200 lb 3.09 lb 1 5 

Eye Grab Hooks, Grade 43, (Import) 


■■Grade 43 



■■Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place 


18 


Trade Size Cat. No. UPC No. Hook Style Finish Working Load Limit Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

1/4 in T9001424 020418222139 Eye Zinc Plated 2600 lb 0.34 lb 10 100 




1331


Eye Slip Hooks, Grade 43, (Import) 





■■Slip Hooks Are Designed to Allow Chain to Slip Through the Hook 


Trade Size Cat. No. UPC No. Hook Style Finish Working Load Limit Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 





Clevis Grab Hooks, Grade 43, (Import) 






■■Hooks are Sized by the Material Diameter of the Chain That They Engage. Make 

Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load 



Trade Size Cat. No. UPC No. For Chain Size Hook Style Finish Working Load Limit Weight Each (lbs.) Shelf Pack Qty. Case Pack Qty. 

1/4 in T9501424 020418192678 1/4 in Clevis Zinc Plated 2600 lb 0.43 lb 10 100 






■■Transport Grade 

■■Yellow Chromate Finish 







5/16 in T9503415 020418201974 5/16 in Clevis Yellow Chromate 4700 lb 0.71 lb 10 50 


1332


Clevis Slip Hooks, Grade 43, (Import) 






■■Hooks are Sized by the Material Diameter of the Chain That 

They Engage. Make Sure the Hook Size and Chain Diameter are 

Compatible Before Attaching to Load 




1/4 in T9700424 020418192081 1/4 in Clevis w/ Latch Zinc Plated 2600 lb 0.65 lb 5 50 







18 


1333

F I T T I N G S 

Carbon and Alloy Steel Fittings Standards 

Apex Tool Group forges Campbell ® fittings under established quality control procedures. 

Dimensional tolerances meet standards adopted by the Drop Forging 

Association as outlined in “Standard Practices and Tolerances for Impression Die 

Forgings.” Working load limits for carbon and alloy steel fittings are based on predetermined 

design factors. 

Working Load Limit. This is the related capacity. It is the maximum load which 

should ever be applied to the fittings in service, even when they are new. 

Proof Test. This is a term designating a quality control tensile test applied to the 

fitting during or subsequent to the process of manufacture. It is the minimum force 

in pounds which the fitting has withstood in the condition and at the time it left 

the factory, under a test in which a constantly increasing force has been applied in 

direct tension to the fitting on a standard test machine. 

Ton. Where “ton” is used in this catalog, it refers to short ton or 2,000 pounds. 

WARNING: Do not exceed Working Load Limit. 

Most of the fittings in this catalog are intended to be used in conjunction with other 

components in a load sustaining system. Care should be taken to select components 

of compatible type, grade, size and working load limit. Any abuse, misuse 

or alteration of the fitting may lessen the load that the fitting will sustain. Some 

examples of such changes and abuses are as follows: 

Stainless Forged Fittings 

• Twisting or side loading. 

• Disfigurement. 

• Deterioration of the fitting caused by strain, usage or corrosion. 

• Shock loading. 

• Use for a purpose other than that for which the particular fitting was intended. 

• Use to carry a load in excess of the Working Load Limit. 

A continual inspection program should be undertaken to discover gouges, distortion, 

cracks, elongation or stretching, spread in the throat, opening of hooks, 

severe wear, or other damage. Apex Tool Group does not accept any liability for 

damages which may result from alteration, misuse or abuse of the product or from 

use in excess of the Working Load Limit. 

Key to Figure Number Designations 

S - Painted Blue A - Alloy ST - Stainless Steel 

G - Galvanized O - Painted Orange V - Electro-polished 

C - Carbon H - Heat Treated Z - Zinc Plated 

NOTICE: The product specifications and dimensions are as accurate as possible 

at the time of printing. However, because we are constantly improving 

the quality and design of our products, they can change without notice. 


Campbell ® stainless forged fittings are used in place of carbon steel fittings 

for marine and food processing applications and where fittings are 

exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures. 

They have won wide acceptance in aviation, boating, cements, 

chemicals, fertilizers, fishing, food processing, hydrodynamics and nuclear 

energy. Many are used in the fields of oceanography, petroleum, pulp and 

paper manufacturing, sewage disposal, textiles, water purification and 

yachting. 

All stainless fittings are made of Type 316 stainless steel and have an 

electro-polished finish for improved stress relief, surface appearance and 

resistance to corrosion and chemical attack. 

NOTICE: The product specifications and dimensions are as accurate 

as possible at the time of printing. However, because we are constantly 

improving the quality and design of our products, they can 

change without notice. 

ADVERTENCIA 

Para prevenir la posibilidad de lesiones graves: 

• NO EXCEDA el límite de carga de trabajo (WLL). 

• NO LA UTILICE choque o golpee la carga. 

• NO USE el accesorio si se ve deformado o desgastado. 

WARNING 


• DO NOT EXCEED the working load limit. 

• DO NOT shock or impact load. 

• DO NOT USE if the fitting is visibly distorted or worn. 

1334


Wire Rope Clips 

WIRE ROPE CLIP 

1000-G Forged 

3300 Malleable Iron 

ST-43-V Stainless Steel 

READ AND UNDERSTAND THESE WARNINGS AND INSTRUCTIONS 

BEFORE USING THESE WIRE ROPE CLIPS. 

IMPORTANT: Instructions For Use 

1. Turn back specified amount of rope per clip size (shown in the table below) from 

the thimble. Install clip on base width from dead end of rope (U-bolt over dead 

end). Tighten nuts evenly to recommended torque. 

2. Assemble the next clip as close to the loop as possible. Turn nuts alternately and 

firmly until the ropes make contact. 

3. If any additional clips are required, they should be equally spaced between the 

first two. Tighten all nuts evenly on all clips to recommended torque (see table). 

4. IMPORTANT! 

Apply the initial load to test the assembly. This load should be equal or greater 

weight than loads expected in use. Retighten nuts to recommended torque. 

Periodically, inspect assembly and tighten nuts to recommended torque. 

The efficiency rating of a properly installed clip is based upon the catalog breaking 

strength of wire rope. The efficiency rating for clip sizes 1/8” through 7/8” is 80% 

and for sizes 1” through 2” is 90%. When a pulley is used in place of thimble for 

turning back the rope, one additional clip should be added. 

The minimum number of clips shown in the table is based on using right or lang 

lay wire rope, 6x19 class, or 6x37 class, IWRC or fiber core, IPS or EIPS. If Seale 

construction or similar large outer wire type construction in the 6x19 class is being 

used for 1” and larger wire rope, one additional clip should be added. 

The minimum number of clips shown in the table can be used with right regular lay 

wire rope, 8x19 class, fiber core IPS or IPS for 1-1/2” and smaller wire rope. The 

number of clips shown also applies to right regular lay wire rope 18x7 class, fiber 

core IPS or XIPS for 1-3/4” and smaller wire rope. 

For classes of wire rope not mentioned, additional clips may be necessary to make 

a proper termination. Do not use on plastic coated wire rope. 

Clip 

Size 

Minimum 

No. of 

Clips 

L 

Amount of Rope 

to Turn Back 

Torque 

Foot Weight 

in. mm in. mm lb kg 

1/8 3 2 3 1 /2 89 5 2 

3/16 5 2 4 102 8 4 

1/4 6 2 5 127 15 7 

5/16 8 2 5-1/2 140 30 14 

3/8 10 2 6 1 /2 165 45 20 

7/16 11 2 7 178 65 30 

1/2 13 3 11-1/2 292 65 30 

9/16 14 3 12 305 95 43 

5/8 16 3 12 305 95 43 

3/4 19 4 18 457 130 59 

7/8 22 4 19 483 225 102 

1 25 5 26 660 225 102 

1-1/8 29 6 34 864 225 102 

1-1/4 32 7 44 1118 360 163 

1-1/2 38 8 54 1372 360 163 

1-3/4 44 8 61 1549 590 268 

2 51 8 71 1803 750 341 

NOTE: If more clips are used than specified in the table above, the 

amount of rope turnback should be increased accordingly. The data above based 

on use of Campbell forged wire rope clips on new rope. 

WARNING 

• Failure to follow the Instructions For Use below and these warnings may 

cause death or serious injury. 

• Prepare wire rope end termination only as instructed. 

• Do not use on plastic coated wire rope. 

• Periodically inspect assembly for wear and abuse, and tighten nuts to 

recommended torque. If worn, distorted or damaged, discard and replace. 

• Always stand clear of loads being lifted. 

18 


1335


Forged Wire Rope Clips, 1000-G 

■■Base is Drop-Forged Carbon Steel 

■■Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion 

■■U-Bolts Are Dyed Blue for Identification Purposes and Use Heavy 

Duty Hex Nuts (UNC-2A) 

■■Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1 

■■Designed to Meet or Exceed All Requirements of ASME B30.26 

Including: Identification, Ductility, Design Factor and Temperature 

■■Permanently Marked with Size and Manufacturer 

■■Sizes 1/4" and Above Marked with USA and Date Code 

■■Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled 

■■Forged and Assembled in Cortland, NY 

■■Note: See Application and Warning Information 


For Rope 

Diameter Cat. No. UPC No. 

Minimum 

No. of 

Clips 

Required 

Clips Per 

Box A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. 

1/8 in 6990234 020418099908 2 100 7/32 in 3/4 in 7/16 in 9/16 in 7/16 in 29/32 in 1-1/16 in 0.08 lb 

3/16 in 6990334 020418099915 2 100 1/4 in 15/16 in 9/16 in 5/8 in 1/2 in 15/16 in 1-1/8 in 0.10 lb 

1/4 in 6990434 020418099922 2 100 5/16 in 1-1/32 in 5/8 in 23/32 in 21/32 in 1-1/8 in 1-7/16 in 0.18 lb 

5/16 in 6990534 020418099939 2 100 3/8 in 1-5/16 in 13/16 in 7/8 in 3/4 in 1-5/16 in 1-11/16 in 0.32 lb 

3/8 in 6990634 020418099946 2 75 7/16 in 1-1/2 in 15/16 in 1 in 29/32 in 1-9/16 in 1-15/16 in 0.48 lb 

7/16 in 6990734 020418099953 2 50 1/2 in 2 in 1-1/8 in 1-1/8 in 1 in 1-11/16 in 2-1/4 in 0.72 lb 

1/2 in 6990834 020418099960 3 50 1/2 in 2 in 1-1/8 in 1-1/8 in 1-1/16 in 1-13/16 in 2-1/4 in 0.76 lb 

9/16 in 6990934 020418099977 3 50 9/16 in 2-3/8 in 1-3/8 in 1-1/4 in 1-9/32 in 1-15/16 in 2-7/16 in 0.96 lb 




1 in 6991634 020418100017 5 25 3/4 in 3-1/2 in 2-1/32 in 1-7/8 in 1-3/4 in 2-3/4 in 3-3/8 in 2.70 lb 

1-1/8 in 6991834 020418100024 6 10 3/4 in 3-7/8 in 2-1/8 in 2-1/32 in 1-29/32 in 3 in 3-5/8 in 3.40 lb 

1-1/4 in 6992034 020418100031 7 10 7/8 in 4-1/4 in 2-3/8 in 2-1/4 in 2-7/32 in 3-1/4 in 4 in 4.60 lb 

1-1/2 in 6992434 020418100048 8 10 7/8 in 4-15/16 in 2-1/4 in 2-9/16 in 2-9/16 in 3-1/2 in 4-3/8 in 6.00 lb 

1-3/4 in 6992835 020418100055 8 1 1-1/8 in 5-13/16 in 2-3/4 in 3-1/16 in 2-3/4 in 3-3/4 in 5-5/16 in 9.00 lb 

2 in 6993235 020418100062 8 1 1-1/4 in 6-1/2 in 3 in 3-3/8 in 3-1/8 in 4-1/4 in 5-7/8 in 13.00 lb 

Weight 

Each 

(lbs.) 

1336


Wire Rope Bundling Clip 

■■For use with thimble eye wire rope choker slings 

■■Used in pre-slinging tubular loads 

■■Forged saddle marked with FORGED USA, Size, Date Code and 

Campbell logo 

■■Saddles, U-bolt with heavy hex nuts are galvanized to ASTM A-153 

■■U-bolt is colored blue for easy identification 

■■Meets requirements of ASME 30.26 

■■NOTE: Bundle clips nuts shall be tightened with a torque wrench: 

tightening shall be accomplished progressively by applying 

torque alternately to each nut in increments of ten percent of the 

torque value 

For Rope 


Torque 

Value 

Clips Per 

Box A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. 

Weight 

Each (lbs.) 

3/4 in T6991294 020418257780 130 ft/lb 20 1-1/2 in 2-13/16 in 3-5/16 in 5/8 in 1-1/16 in 2-5/16 in 2.20 lb 

■■Base and U-Bolt Are Type 316 Stainless Steel 

■■Electro-Polish Finish 

■■Imported 

Stainless Steel Forged 

Wire Rope Clips, ST-43-V 

For Rope 


Minimum No. of 

Clips Required B Dim. C Dim. D Dim. E Dim. 

Weight Each 

(lbs.) 

1/8 in 6403002 020418094101 2 5/32 in 9/16 in 3/4 in 3/4 in 0.04 lb 

3/16 in 6403003 020418094118 2 1/4 in 3/4 in 7/8 in 1-1/8 in 0.10 lb 

1/4 in 6403004 020418094125 2 5/16 in 1 in 1-1/8 in 1-3/8 in 0.18 lb 

3/8 in 6403006 020418094132 2 1/2 in 1-3/8 in 1-1/2 in 2 in 0.52 lb 

1/2 in 6403008 020418094149 3 9/16 in 2 in 1-7/8 in 2-5/16 in 0.89 lb 

18 


1337


Shackles 

BOLT TYPE PIN 

ANCHOR 

SHACKLE 

SCREW PIN 

CHAIN 

SHACKLE 

SCREW PIN 

ANCHOR 

SHACKLE 

ROUND PIN 

CHAIN 

SHACKLE 

1st letter indicates material, number is type, last letter indicates finish 

Round Pin Chain 

C-416-S 

Screw Pin Anchor C-419-S C-419-G A-419-G 

Screw Pin Chain 

C-422-G 

Bolt Type Anchor C-999-G A-999-G 

Screw Pin Anchor - Stainless ST-419-V 

Bolt Type Anchor - Stainless ST-999-V 

WARNING 

• Failure to follow the instructions for use and these warnings may cause death or serious injury. 

• Use shackles only as indicated. 

• Shackles must always be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted 

or damaged, discard the entire shackle and replace. 

• Do not use round pin shackles in rigging applications. 

• Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to 

unscrew and drop the load. 

• Screw pin should be tightened prior to use. 


READ AND UNDERSTAND THESE WARNINGS AND INSTRUCTIONS BEFORE USING SHACKLES. 

Campbell carbon and alloy steel shackles are drop-forged. All pins and bolts are 

galvanized and made of alloy steel. The shackles meet the design requirements of 

Federal Specification RR-C-271, Type IV. Galvanizing meets ASTM A-153 specification. 

Self-colored shackles are painted blue for identification purposes. 

Campbell stainless steel shackles are drop-forged and made of Type 316 Stainless 

Steel with an electro-polished finish. 


1. Do not exceed working load limit (WLL). See tables below. 

2. The standard WLL given applies to in-line loading (perpendicular to the pin). 

When the loading is at an angle, 

the WLL is reduced as shown in the table below. 

3. Any angular loads must be on the bow. All straight loading should be on the pin. 


WLL in Tons–Campbell Carbon and Alloy Shackles 

Shackle Size 

In-Line Load 45° Load 90° Load 

WLL WLL WLL 

in. mm ton kg ton kg ton kg 

3⁄16 5 1⁄3 302 1⁄5 181 1⁄6 151 

1⁄4 6 1⁄2 454 1⁄3 302 1⁄4 227 

5⁄16 8 3⁄4 680 1⁄2 454 1⁄3 302 

3⁄8 10 1 907 2⁄3 605 1⁄2 454 

3⁄8 Alloy 10 2 1814 1-1⁄3 1210 1 907 

7⁄16 11 11⁄2 1361 1 907 3⁄4 680 

1⁄2 13 2 1814 1-1⁄3 1210 1 907 

1⁄2 Alloy 13 31⁄4 2948 2-1⁄3 2117 1-1⁄2 1361 

5⁄8 16 31⁄4 2948 2-1⁄4 2041 1-1⁄2 1361 

3⁄4 19 43⁄4 4309 3-1⁄3 3024 2-1⁄3 2117 

3⁄4 Alloy 19 7 6350 5 4536 3-1⁄2 3175 

7⁄8 22 61⁄2 5897 4-1⁄2 4082 3-1⁄4 2948 

1 25 81⁄2 7711 6 5443 4-1⁄4 3856 

1 Alloy 25 121⁄2 11338 8-3⁄4 7936 6-1⁄4 5668 

1-1⁄8 29 91⁄2 8618 6-2⁄3 6048 4-3⁄4 4309 

1-1⁄4 32 12 10886 8-1⁄3 7560 6 5443 

1-1⁄4 Alloy 32 18 16326 12-1⁄2 11338 9 8163 

1-3⁄8 35 131⁄2 12247 9-1⁄2 8618 6-3⁄4 6123 

1-1⁄2 38 17 15422 11-7⁄8 10773 8-1⁄2 7711 

1-5⁄8 41 20 18144 14 12700 10 9072 

2 51 35 31751 24-1⁄2 22226 17-1⁄2 15876 

2-1⁄2 64 55 49895 38-1⁄2 34926 27-1⁄2 24947 

WLL in Tons–Campbell Carbon and Alloy Shackles 

Shackle Size 

In-Line Load 45° Load 90° Load 

WLL WLL WLL 

in. mm ton kg ton kg ton kg 

1⁄4 6 1000 454 700 318 500 227 

3⁄8 10 2000 907 1400 635 1000 454 

7⁄16 11 3000 1362 2100 953 1500 681 

1⁄2 13 4000 1814 2800 1270 2000 907 

5⁄8 16 6000 2722 4200 1905 3000 1362 

3⁄4 19 8000 3629 5600 2540 4000 1814 

1338


Carbon Bolt Type Anchor Shackles, Galvanized, C-999-G 

■■Shackle Bodies Are Drop-Forged Carbon Steel 

■■Galvanized to Meet ASTM A-153 Specifications 

■■C-999-G Shackles Meet the Design Requirements of Federal 

Specification RR-C-271, Type IVA, Grade A, Class 3 

■■Working Load Limit, Size, Manufacture Name, Date Code and USA 

Permanently Marked on Each Shackle 

■■Statistically Tested for Impact Resistance, Tensile Strength, Hardness, 

Ductility and Fatigue 

■■999 Series Shackles Meet or Exceed All Manufacturing Requirements 

of the ASME B30.26 ”Rigging Hardware”. These Include the Material 

Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement 

(Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and 

the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be 

Proof Tested in Accordance with Section 26-1.4 

■■Certification Available Upon Request 

■■6 to 1 Design Factor 

■■Pins and Bolts Are Heat-Treated and Made of Alloy Steel 



Working 

Load Limit 

(Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 

(+/-) B Dim. C Dim. D Dim. E Dim. F Dim. 

Weight 

Each (lbs.) 

1/4 in 5390435 020418193156 1/2 T 1/16 in 1/16 in 5/16 in 1-1/8 in 15/32 in 25/32 in 11/16 in 0.10 lb 

3/8 in 5390635 020418193170 1 T 1/8 in 1/16 in 7/16 in 1-7/16 in 21/32 in 31/32 in 15/16 in 0.30 lb 

1/2 in 5390835 020418075520 2 T 1/8 in 1/16 in 5/8 in 1-15/16 in 13/16 in 1-1/4 in 1-1/4 in 0.70 lb 

5/8 in 5391035 020418075544 3-1/4 T 1/8 in 1/16 in 3/4 in 2-7/16 in 1-1/16 in 1-9/16 in 1-7/16 in 1.30 lb 


7/8 in 5391435 020418075582 6-1/2 T 1/4 in 1/16 in 1 in 3-1/8 in 1-7/16 in 2-1/16 in 2 in 3.30 lb 

1 in 5391635 020418075605 8-1/2 T 1/4 in 1/16 in 1-1/8 in 3-3/4 in 1-11/16 in 2-1/2 in 2-3/8 in 5.00 lb 

1-1/8 in 5391835 020418075629 9-1/2 T 1/4 in 1/16 in 1-1/4 in 4-1/4 in 1-13/16 in 2-15/16 in 2-5/8 in 7.10 lb 

1-1/4 in 5392035 020418075643 12 T 1/4 in 1/16 in 1-3/8 in 4-1/2 in 2 in 3-1/4 in 3 in 10.00 lb 


1-1/2 in 5392435 020418075681 17 T 1/4 in 1/8 in 1-5/8 in 5-3/4 in 2-3/8 in 3-7/8 in 3-1/2 in 16.00 lb 

1-3/4 in 5392835 020418075735 25 T 1/4 in 1/8 in 2 in 7 in 2-7/8 in 4-3/4 in 4 in 28.50 lb 

2 in 5393235 020418075766 35 T 1/2 in 1/8 in 2-1/4 in 7-3/4 in 3-1/4 in 5-3/4 in 4-7/8 in 40.00 lb 


18 


1339


Alloy Bolt Type Anchor Shackles, Galvanized, A-999-G 

■■Shackle Bodies Are Drop-Forged Alloy Steel 


■■A-999-G Shackles Meet the Design Requirements of Federal Specification 

RR-C-271, Type IVA Grade B, Class 3 





■■999 Series Shackles Meet or Exceed All Manufacturing Requirements of 

the ASME B30.26 ”Rigging Hardware”. These Include the Material Ductility 

Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 

26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective 

Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in 

Accordance with Section 26-1.4 







Working 

Load Limit 

(Metric 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 


Weight 

Each (lbs.) 

3/8 in 5390695 020418267338 2 t 1/8 in 1/16 in 7/16 in 1-7/16 in 21/32 in 31/32 in 15/16 in 0.30 lb 

1/2 in 5390895 020418182198 3-1/3 t 1/8 in 1/16 in 5/8 in 1-15/16 in 13/16 in 1-1/4 in 1-1/4 in 0.88 lb 

5/8 in 5391095 020418267345 5 t 1/8 in 1/16 in 3/4 in 2-3/8 in 1-1/16 in 1-11/16 in 1-1/2 in 1.40 lb 


7/8 in 5391495 020418267352 9-1/2 t 1/4 in 1/16 in 1 in 3-5/16 in 1-7/16 in 2-9/32 in 2-3/32 in 3.60 lb 

1 in 5391695 020418182112 12-1/2 t 1/4 in 1/16 in 1-1/8 in 3-3/4 in 1-11/16 in 2-1/2 in 2-3/8 in 6.12 lb 

1-1/4 in 5392095 020418267369 18 t 1/4 in 1/16 in 1-3/8 in 4-1/2 in 2 in 3-1/4 in 3 in 10.00 lb 

1-3/8 in 5392295 020418267376 21 t 1/4 in 1/8 in 1-1/2 in 5-1/4 in 2-1/4 in 3-5/8 in 3-5/16 in 13.30 lb 


1-3/4 in 5392895 020418267390 40 t 1/4 in 1/8 in 2 in 7 in 2-7/8 in 4-7/8 in 4-3/16 in 33.90 lb 

2 in 5393295 020418267406 55 t 1/4 in 1/8 in 2-1/4 in 7-3/4 in 3-1/4 in 5-3/4 in 4-7/8 in 50.00 lb 


■■Forged Type 316 Stainless Steel 




Stainless Steel Bolt Type Anchor Shackles, ST-999-V 


Working 

Load Limit 

(Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 


Weight 

Each (lbs.) 


1/2 in 6402408 020418093883 1-1/2 T 1/8 in 1/16 in 5/8 in 1-15/16 in 13/16 in 1-1/4 in 1-1/4 in 0.72 lb 

5/8 in 6402410 020418093890 2 T 1/8 in 1/16 in 3/4 in 2-7/16 in 1-1/16 in 1-9/16 in 1-7/16 in 1.38 lb 

1340


Carbon Screw Pin Anchor Shackles, Self-Colored, C-419-S 


■■Self Colored (Painted Blue) 

■■C-419-S Shackles Meet the Design Requirements of Federal Specification 

RR-C-271, Type IVA, Grade A, Class 2 
















Working 

Load Limit 

(Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 


Weight 

Each (lbs.) 
















18 


1341


Carbon Screw Pin Anchor Shackles, Galvanized, C-419-G 



■■C-419-G Shackles Meet the Design Requirements of Federal Specification 

RR-C-271, Type IVA, Grade A, Class 2 

















Working 

Load Limit 

(Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 


Weight 

Each (lbs.) 

3/16 in 5410335 020418076138 1/3 T 1/16 in 1/16 in 1/4 in 7/8 in 3/8 in 19/32 in 9/16 in 0.05 lb 

















1342


Alloy Screw Pin Anchor Shackles, Galvanized, A-419-G 

■■Shackle Bodies Are Drop-Forged Alloy Steel 


■■A-419-G Shackles Meet the Design Requirements of Federal Specification 

RR-C-271, Type IVA, Grade B, Class 2 
















Working 

Load Limit 

(Metric 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 


Weight 

Each (lbs.) 

3/8 in 5410695 020418182136 2 t 1/8 in 1/16 in 7/16 in 1-7/16 in 21/32 in 31/32 in 15/16 in 0.31 lb 

1/2 in 5410895 020418182143 3-1/3 t 1/8 in 1/16 in 5/8 in 1-15/16 in 13/16 in 1-1/4 in 1-1/4 in 0.70 lb 



7/8 in 5411495 020418267437 9-1/2 t 1/4 in 1/16 in 1 in 3-5/16 in 1-7/16 in 2-9/32 in 2-3/32 in 3.60 lb 

1 in 5411695 020418182167 12-1/2 t 1/4 in 1/16 in 1-1/8 in 3-3/4 in 1-11/16 in 2-1/2 in 2-3/8 in 5.70 lb 

1-1/4 in 5412095 020418182174 18 t 1/4 in 1/16 in 1-3/8 in 4-1/2 in 2 in 3-1/4 in 3 in 10.50 lb 



2 in 5413295 020418267468 55 t 1/4 in 1/8 in 2-1/4 in 7-3/4 in 3-1/4 in 5-3/4 in 4-7/8 in 50.00 lb 

18 

■■Forged Type 316 Stainless Steel 




Stainless Steel Screw Pin Anchor Shackles (Import) 


Working 

Load Limit 

(Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 


Weight 

Each (lbs.) 








1343


Carbon Screw Pin Chain Shackles, Galvanized, C-422-G 



■■C-422-G Shackles Meet the Design Requirements of Federal Specification 

RR-C-271, Type IVB, Grade A, Class 2 

■■Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently 

Marked on Each Shackle 

■■Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility 

and Fatigue 

■■422 Series Shackles Meet or Exceed All Manufacturing Requirements of the 

American Society for Mechanical Engineers (Asme) B30.26 ”Rigging Hardware”. 

These Include the Material Ductility Requirement (Section 26-1.1.2), the Design 

Factor Requirement (Section 26-1.2), the Identification Requirement (Section 

26-1.5.1) and the Effective Temperature Range (Section 26-1.6.1) the Shackles 

Can Be Proof Tested in Accordance with Section 26-1.4 






Working Load 

Limit (Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 

(+/-) B Dim. C Dim. D Dim. 

Weight Each 

(lbs.) 

5/16 in 5430535 020418076923 3/4 T 1/16 in 1/16 in 3/8 in 1 in 17/32 in 0.17 lb 

3/8 in 5430635 020418076947 1 T 1/8 in 1/16 in 7/16 in 1-1/4 in 21/32 in 0.30 lb 


5/8 in 5431035 020418077005 3-1/4 T 1/8 in 1/16 in 3/4 in 2 in 1-1/16 in 1.25 lb 

1 in 5431635 020418077067 8-1/2 T 1/4 in 1/16 in 1-1/8 in 3-1/4 in 1-11/16 in 4.50 lb 


Carbon Round Pin Chain Shackles, Self-Colored, C-416-S 


■■Self Colored (Painted Blue) 

■■C-416-S Shackles Meet the Design Requirements of Federal Specification 

RR-C-271, Type IVB, Grade A, Class 1 

■■Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently 

Marked on Each Shackle Meeting or Exceeding Requirements of ASME 30.26 

■■Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility 

and Fatigue 






Working Load 

Limit (Short 

Tons) 

Length 

Tolerance 

(+/-) 

Width 

Tolerance 

(+/-) B Dim. C Dim. D Dim. 

Weight Each 

(lbs.) 

5/16 in 5420505 020418076558 3/4 T 1/16 in 1/16 in 3/8 in 1 in 17/32 in 0.17 lb 


7/16 in 5420705 020418076596 1-1/2 T 1/8 in 1/16 in 1/2 in 1-1/2 in 23/32 in 0.40 lb 


1344


Hoist Hooks 


Eye Hoist - Unlatched C-1010-S A-1010-O 

Eye Hoist - Latched C-1015-S C-1015-G A-1015-O 

Swivel Hoist - Unlatched C-1013-S A-1013-O 

Swivel Hoist - Latched C-1014-S A-1014-O 

Campbell hoist hooks are all drop-forged and heat treated. All hooks are drilled for 

latch assembly. 

EYE HOIST HOOK 

SWIVEL HOIST 

HOOK 

READ AND UNDERSTAND THESE WARNINGS AND 

INSTRUCTIONS BEFORE USING HOIST HOOKS. 

WARNING 

• Failure to follow the instructions for use and these warnings may cause 

death or serious injury. 

• Use hoist hooks only as indicated. 

• Never point load a hook. 

• Do not use hooks for lifting personnel. 

• Hooks must always be inspected for wear, distortion and damage before 

use. If worn, distorted or damaged, discard and replace. 

• Do not weld on hooks. If a hook is exposed to weld spatter, discard 

that hook. 



1. For hooks with latches, the latch is only designed to retain slings and rigging 

attachments. The latch must not support the load. 

2. Swivel hoist hooks are not designed to swivel under load. 

3. Do not exceed working load limit (WLL). See table below. 

Working Load Limits — Swivels 

Size 

Carbon Steel WLL 

Alloy WLL 

ton kg ton kg 

2/22 3⁄4 680 1 907 

3/23 1 907 1-1⁄2 1361 

4/24 1-1⁄2 1361 2 1814 

5/25 2 1814 3 2722 

6/26 2-1⁄2 2268 4 3629 

7/27 3 2722 4-1⁄2 4082 

9/29 5 4536 7 6350 

11/31 7-1⁄2 6804 11 9979 

12/32 10 9072 15 13608 

34 - - 22 19958 

18 


1345


Swivel Hoist Hooks, C-1013-S, A-1013-O 

■■Drop Forged Carbon Steel or Alloy and Heat Treated 

■■Carbon Steel Hooks Are Painted Blue; Alloy Hooks Are Painted 

Orange 


■■All Hooks Are Drilled for Integrated Latch Kits 

■■The Latch Is Only Designed to Retain Slings and Rigging 

Attachments. The Latch Must Not Support the Load. 

■■Swivel Hoist Hooks ARE NOT Designed to Swivel Under Load. 


Trade Size Cat. No. UPC No. Material Finish 


(Short Tons) 

Latch Marking 

Replacement Latch 

No. 

4 3950415IL 020418239236 Alloy Steel Painted Orange 2 T CC-4 7506495 


7 3940705IL 020418240508 Carbon Steel Painted Blue 3 T CC-5 7506695 

7 3950715IL 020418240492 Alloy Steel Painted Orange 4-1/2 T CC-5 7506695 


11 3941105IL 020418240416 Carbon Steel Painted Blue 7-1/2 T CC-8 7507095 




Trade 

Size Cat. No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. H Dim. K Dim. L Dim. R Dim. S Dim. 

4 3950415IL 2-1/2 in 1-1/4 in 1-1/2 in 3-9/16 in 1-1/8 in 1-1/32 in 1-1/32 in 1-1/8 in 11/16 in 7-5/16 in 5-13/16 in 1/2 in 

5 3950515IL 3 in 1-5/8 in 1-3/4 in 4 in 1-1/4 in 1-1/8 in 1-5/32 in 1-5/16 in 13/16 in 8-3/16 in 6-7/16 in 5/8 in 

7 3940705IL 3-1/2 in 1-3/4 in 2 in 4-15/16 in 1-17/32 in 1-15/16 in 1-7/16 in 1-5/8 in 1-1/16 in 9-7/16 in 8 in 3/4 in 


9 3940905IL 4-1/2 in 2-1/4 in 2-1/2 in 6-15/32 in 1-31/32 in 1-21/32 in 1-13/16 in 2-1/8 in 1-3/8 in 12-3/8 in 9-5/8 in 1 in 

11 3941105IL 5-5/8 in 2-27/32 in 3-1/8 in 7-11/32 in 2-1/8 in 2 in 2-1/4 in 2-5/8 in 1-1/2 in 15 in 11-9/16 in 1-1/4 in 


12 3951215IL 5-5/8 in 2-3/4 in 3-1/8 in 7-13/16 in 2-9/16 in 2-1/8 in 2-9/16 in 2-15/16 in 1-13/16 in 16-1/32 in 12-1/4 in 1-1/4 in 

1346


Swivel Hoist Hooks - Latched, C-1014-S, A-1014-O 


■■Carbon Steel Hooks Are Painted Blue; Alloy Hooks Are Painted Orange 



■■The Latch Is Only Designed to Retain Slings and Rigging Attachments. 

The Latch Must Not Support the Load. 

■■Swivel Hoist Hooks ARE NOT Designed to Swivel Under Load. 




(Short Tons) 

Latch Marking 

Replacement Latch 

No. 

2 3942205IL 020418236242 Carbon Steel Painted Blue 3/4 T CC-3 T7502101 

2 3952215IL 020418236204 Alloy Steel Painted Orange 1 T CC-3 T7502101 

3 3942305IL 020418236792 Carbon Steel Painted Blue 1 T CC-3 T7502101 

3 3952315IL 020418236747 Alloy Steel Painted Orange 1-1/2 T CC-3 T7502101 

4 3942405IL 020418239243 Carbon Steel Painted Blue 1-1/2 T CC-4 7506495 





7 3952715IL 020418240454 Alloy Steel Painted Orange 4-1/2 T CC-5 7506695 






Trade 

Size Cat. No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. H Dim. K Dim. L Dim. R Dim. S Dim. 

2 3942205IL 2 in 1 in 1-1/4 in 2-15/16 in 1-1/32 in 7/8 in 25/32 in 29/32 in 9/16 in 5-5/8 in 4-5/8 in 3/8 in 

2 3952215IL 2 in 1 in 1-1/4 in 2-15/16 in 1-1/32 in 7/8 in 25/32 in 29/32 in 9/16 in 5-5/8 in 4-5/8 in 3/8 in 

3 3942305IL 2-1/2 in 1-1/4 in 1-1/2 in 3-1/4 in 1-1/32 in 7/8 in 27/32 in 31/32 in 5/8 in 6-11/16 in 5-7/16 in 1/2 in 

3 3952315IL 2-1/2 in 1-1/4 in 1-1/2 in 3-1/4 in 1-1/32 in 7/8 in 27/32 in 31/32 in 5/8 in 6-11/16 in 5-7/16 in 1/2 in 












18 


1347


Eye Hoist Hooks, C-1010-S, A-1010-O 


■■Carbon Steel Hooks Are Painted Blue; Alloy Hooks Are Painted Orange 



■■The Latch Is Only Designed to Retain Slings and Rigging Attachments. 

The Latch Must Not Support the Load. 



Working Load 

Limit (Short 

Tons) 

Latch Marking 

Replacement 

Latch No. 

Weight Each 

(lbs.) 

27 3922715IL 020418240614 Alloy Steel Painted Orange 4-1/2 T CC-5 7506695 4.00 lb 

29 3912905IL 020418240546 Carbon Steel Painted Blue 5 T CC-7 7506895 8.00 lb 

29 3922915IL 020418240607 Alloy Steel Painted Orange 7 T CC-7 7506895 8.00 lb 

31 3913105IL 020418240560 Carbon Steel Painted Blue 7-1/2 T CC-8 7507095 13.00 lb 




34 3923415IL 020418240577 Alloy Steel Painted Orange 22 T CC-34 T7507495 36.00 lb 


Trade Size Cat. No. A Dim. B Dim. D Dim. E Dim. G Dim. H Dim. K Dim. L Dim. R Dim. S Dim. 

27 3922715IL 2-15/16 in 1-9/16 in 4-15/16 in 1-17/32 in 1-7/16 in 1-5/8 in 1-1/16 in 7-25/32 in 5-21/32 in 11/16 in 

29 3912905IL 3-3/4 in 2 in 6-15/32 in 1-31/32 in 1-13/16 in 2-1/8 in 1-3/8 in 9-7/8 in 7-3/16 in 7/8 in 


31 3913105IL 4-5/8 in 2-7/16 in 7-11/32 in 2-1/8 in 2-1/4 in 2-5/8 in 1-1/2 in 12-7/32 in 9 in 1-3/32 in 


32 3913205IL 5-11/32 in 2-3/4 in 7-13/16 in 2-9/16 in 2-9/16 in 2-15/16 in 1-13/16 in 13-7/8 in 11-1/8 in 1-1/4 in 



Eye Hoist Hooks - Latched, C-1015-S, C-1015-G, A-1015-O 


■■Carbon Steel Hooks Painted Blue or Galvanized to Astm A-153 

Specifications; Alloy Hooks Are Painted Orange 



■■The Latch Is Only Designed to Retain Slings and Rigging 

Attachments. The Latch Must Not Support the Load. 


1348




(Short Tons) 

Latch Marking 

Replacement 

Latch No. 

Weight Each 

(lbs.) 

22 3914205IL 020418236211 Carbon Steel Painted Blue 3/4 T CC-3 T7502101 0.65 lb 

22 3914235IL 020418236228 Carbon Steel Galvanized 3/4 T CC-3 T7502101 0.65 lb 


23 3914305IL 020418236785 Carbon Steel Painted Blue 1 T CC-3 T7502101 0.80 lb 

23 3914335IL 020418236778 Carbon Steel Galvanized 1 T CC-3 T7502101 0.80 lb 

23 3924315IL 020418236761 Alloy Steel Painted Orange 1-1/2 T CC-3 T7502101 0.80 lb 


24 3914435IL 020418239267 Carbon Steel Galvanized 1-1/2 T CC-4 7506495 1.05 lb 



25 3914535IL 020418237980 Carbon Steel Galvanized 2 T CC-4 7506495 1.69 lb 



27 3914735IL 020418240690 Carbon Steel Galvanized 3 T CC-5 7506695 4.00 lb 

27 3924715IL 020418240706 Alloy Steel Painted Orange 4-1/2 T CC-5 7506695 4.00 lb 








Trade Size Cat. No. A Dim. B Dim. D Dim. E Dim. G Dim. H Dim. K Dim. L Dim. R Dim. S Dim. 

22 3914205IL 1-11/16 in 15/16 in 2-15/16 in 1-1/32 in 25/32 in 29/32 in 9/16 in 4-29/64 in 3-5/16 in 3/8 in 






24 3914405IL 2-1/8 in 1-1/8 in 3-9/16 in 1-1/8 in 1-1/32 in 1-1/8 in 11/16 in 5-15/32 in 4 in 1/2 in 



25 3914505IL 2-3/8 in 1-1/4 in 4 in 1-1/4 in 1-5/32 in 1-5/16 in 13/16 in 6-13/32 in 4-11/16 in 9/16 in 













18 


1349


■■Drop Forged Heat-Treated Carbon Steel 

■■Galvanized to Astm A-153 Specifications 



Snap Hooks, C-478-G 


Working 

Load Limit 

Replacement 

Latch No. B Dim. D Dim. L Dim. O Dim. R Dim. 

Weight 

Each (lbs.) 

7/16 in 4530734 020418176722 750 lb 3991401 3/4 in 2-7/16 in 4-1/16 in 21/32 in 3-1/4 in 0.28 lb 10 

7/16 in 4530735 020418074196 750 lb 3991401 3/4 in 2-7/16 in 4-1/16 in 21/32 in 3-1/4 in 0.28 lb 1 

9/16 in 4530935 020418074202 1000 lb 3991402 1-1/8 in 2-31/32 in 5-1/32 in 1 in 4-1/32 in 0.45 lb 1 

Shelf Pack 

Qty. 

Sorting Hooks, A-479-O 

■■Drop Forged Heat-Treated Alloy Steel 

■■Standard Finish is Painted Orange 


■■Available with Handle for Safety and Control 


■■Handle is Not to Be Used for Supporting Load 

Cat. No. 

UPC No. 

Working Load 

Limit - Bottom 

Working Load 

Limit - Tip B Dim. L Dim. O Dim. R Dim. 

Weight Each 

(lbs.) 

3899500 020418070723 7-1/2 T 2 T 1-3/8 in 9-3/4 in 2-13/16 in 5/8 in 6.00 lb 

3899501 020418193040 7-1/2 T 2 T 1-3/8 in 9-3/4 in 2-13/16 in 5/8 in 6.25 lb 


Grab/Slip Hooks 

EYE GRAB 

HOOK 

EYE SLIP 

HOOK 

CLEVIS 

GRAB HOOK 

CLEVIS SLIP 

HOOK 

READ AND UNDERSTAND THESE WARNINGS AND INSTRUCTIONS BEFORE 

USING GRAB AND SLIP HOOKS. 

Eye Grab Hook 

Eye Slip Hook 

Clevis Grab Hook 

Clevis Grab Hook 

Clevis Slip Hook 

Clevis Slip Hook 


1. These hooks are designed to engage chain and are sized by the material 

diameter of the chain that they engage. Make sure hook size and chain diameter 

are compatible before attaching to load. 

2. Grab hooks are designed to grab a chain link and hold it in place. 

3. Slip hooks are designed to allow chain to slip through the hook. 

4. Only use genuine Campbell parts when replacing clevis pins and cotter keys. 


Working Load Limits (lb and kg) – Hooks 

G43 Import 

G43 Import 

C-473-S, C-473-Z, A-473-O 

G43 & G70 Import 

A-476-O 

G43 Import 

WARNING 



• Use these hooks only as indicated. 

• Never point load a hook. 

• Do not use hooks for lifting personnel. 

• Hooks must always be inspected for wear, distortion and damage before 



Grade 43 Heat Treated 

Alloy 

Size Eye & Clevis Grab, Clevis Slip WLL Eye & Clevis Grab WLL Clevis Slip WLL 

in. mm lb kg lb kg lb kg 

1/4 6 2600 1179 4100 1860 4100 1860 

5/16 8 3900 1769 5100 2313 5100 2313 

3/8 10 5400 2449 7100 3221 7300 3221 

7/16 11 -- -- 10000 4536 10000 4536 

1/2 13 9200 4173 12000 5443 13000 5897 

5/8 16 11500 5216 18100 8210 20300 9208 

3/4 19 -- -- 28300 12837 -- -- 

1350


Eye Grab Hooks, Grade 43, (Import) 








Working Load 

Limit 

Weight Each 






Eye Slip Hooks, Grade 43, (Import) 








Working Load 

Limit 

Weight Each 






18 










Trade Size Cat. No. UPC No. For Chain Size Hook Style Finish 

Working Load 

Limit 

Weight Each 

(lbs.) 

Shelf Pack 

Qty. 





Case Pack 

Qty. 


1351




■■Transport Grade 

■■Yellow Chromate Finish 






Trade 

Size Cat. No. UPC No. For Chain Size Hook Style Finish 

Working Load 

Limit 

Weight Each 




Clevis Grab Hooks, C-473-S, C-473-Z, A-473-O 

■■Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel 

■■Grade 30 & 43 Hooks Available Self-Colored or Zinc-Plated 

■■Alloy Hooks Are Painted Orange and Stamped ”Alloy”; 3.5 to 1 Design Factor 

■■Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled 

■■Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box 


■■Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure 

the Hook Size and Chain Diameter are Compatible Before Attaching to Load 



Trade 

Size Cat. No. UPC No. Material Finish 

Working 

Load Limit B Dim. E Dim. P Dim. R Dim. 

Weight 

Each (lbs.) 

1/4 in 4500404 020418073878 Carbon Steel Self-Colored 2600 lb 3/8 in 11/32 in 5/16 in 1-23/32 in 0.38 lb 10 

1/4 in 4500405 020418073885 Carbon Steel Self-Colored 2600 lb 3/8 in 11/32 in 5/16 in 1-23/32 in 0.38 lb - 

1/4 in 4500424 020418073892 Carbon Steel Zinc Plated 2600 lb 3/8 in 11/32 in 5/16 in 1-23/32 in 0.38 lb 10 

1/4 in 4503315 020418074103 Alloy Steel Painted Orange 4100 lb 3/8 in 11/32 in 5/16 in 1-23/32 in 0.38 lb - 
















Shelf Pack 

Qty. 

1352


Clevis Slip Hooks, Grade 43, (Import) 










For Chain 

Size Hook Style Finish 

Working Load 

Limit 

Weight Each 

(lbs.) 

Shelf Pack 

Qty. 









Case Pack 

Qty. 

Clevis Slip Hooks, A-476-O 

■■Material is Heat-Treated Alloy Steel 

■■Alloy Hooks Are Painted Orange and Stamped "AH" 

■■1/4" to 3/8" Hooks Have Drilled Hole for Latch Kit 

■■Design Factor: 3.5 to 1 






Working 

Load Limit B Dim. E Dim. P Dim. R Dim. 

Weight Each 

(lbs.) 

1/4 in 4403315 020418073816 Alloy Steel Painted Orange 4100 lb 3/8 in 15/16 in 5/16 in 1-23/32 in 0.60 lb 

5/16 in 4403415 020418073823 Alloy Steel Painted Orange 5100 lb 7/16 in 1-1/16 in 3/8 in 3 in 0.90 lb 

3/8 in 4403515 020418073830 Alloy Steel Painted Orange 7100 lb 1/2 in 1-1/4 in 7/16 in 3-13/32 in 1.44 lb 



5/8 in 4403815 020418073861 Alloy Steel Painted Orange 20300 lb 3/4 in 2 in 3/4 in 4-13/16 in 5.00 lb 

18 


1353


Latch Kits for Non-Integrated Hooks 

■■Always Inspect the Hook and Latch Before Using 

■■Always Make Sure the Spring Forces the Latch Against the Point of Hook 

■■Check the Load Before Lifting to Make Sure the Hook (Not the Latch) is Supporting Load 

■■To Assemble Latch on Hook, Follow Instructions Supplied with Latch Kit 

■■Clapper Latches Are Zinc Plated 

■■Spring Spacer Adapts Latch to Hooks with Narrow Cam 

■■Bolt and Nut Permit Fast, Easy Installation 

■■Note: Latches Listed on This Page Cannot Be Used on Campbell's Current Design of 

Integrated Sling and Hoist Hooks. 

■■Please Refer to the Appropriate Catalog Pages for These Hooks for Proper Replacement 

Latch Kits. 



• Loads may disengage from hook if proper procedures are not followed. 

• A falling load may cause serious injury or death. 

WARNING 

• The load must never be supported by the latch. 

• Latches must always be inspected for wear or damage before use. If worn, 

distorted or damaged, discard and replace. 



Hook 

Size 

Size 

No. Cat. No. UPC No. 

Kit 

Type 

Cam-Alloy 

Sling 

Hook 

Cam-Alloy 

Sling Hook 

with Latch 

Quik-Alloy 

Sling 

Hook 

Quik-Alloy 

Sling 

Hook with 

Latch A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. 

1/4 in 2-22 3990101 020418072727 916-G - - - - 23/32 in 9/16 in 1-1/4 in 5/8 in 1/4 in 1/4 in 

1/4 in 2-22 3991401 020418177088 916-U - - - - 23/32 in 9/16 in 1-1/4 in 5/8 in 1/4 in 1/4 in 

5/16 in 3-23 3990201 020418072734 916-G - - - - 23/32 in 9/16 in 1-3/8 in 

5/16 in 3-23 3991402 020418177095 916-U - - - - 23/32 in 9/16 in 1-3/8 in 

- 4-24 3990301 020418072741 916-G - - - - 15/16 in 

- 4-24 3991403 020418177101 916-U - - - - 15/16 in 

3/8 in 5-25 3990401 020418072758 916-G 5644415 5644495 5744415 5744495 15/16 in 

3/8 in 5-25 3991404 020418177118 916-U - - - - 15/16 in 

- 6-26 3990501 020418072765 916-G - - - - 15/16 in 

7/16 in 7-27 3990601 020418072772 916-G 5644615 5644695 5744615 5744695 15/16 in 

7/16 in 7-27 3991405 020418177125 916-U - - - - 15/16 in 

- 8-28 3990701 020418072789 916-G 5644815 5644895 5744815 5744895 

1/2 in 9-29 3990801 020418072796 916-G - - - - 

1/2 in 9-29 3991406 020418177132 916-U - - - - 

- 10-30 3990901 020418072802 916-G - - - - 

5/8 in 11-31 3991001 020418072819 916-G 5645015 & 

5645215 

5645095 & 

5645295 

5745015 & 

5745215 

5745095 & 

5745295 

5/8 in 11-31 3991407 020418177149 916-U - - - - 

- 12-32 3991101 020418072826 916-G - - - - 2 in 

- 12-32 3991408 020418177156 916-U - - - - 2 in 

- 34 3991409 020418177163 916-U 5645415 & 

5641615 

5645495 & 

5641695 

- - 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

2-3/16 

in 

25/32 

in 

25/32 

in 

25/32 

in 

25/32 

in 

25/32 

in 

25/32 

in 

25/32 

in 

1-17/32 

in 

1-17/32 

in 

1-11/16 

in 

1-11/16 

in 

1-31/32 

in 

1-7/8 in 

1-7/8 in 

1 in 2-3/8 in 

1 in 

1 in 

1 in 

2-11/16 

in 

2-11/16 

in 

2-31/32 

in 

1 in 3-7/32 in 

1 in 3-7/32 in 

1-17/32 

in 

1-17/32 

in 

1-3/4 in 

3-7/16 in 

3-7/16 in 

4-11/32 

in 

39/64 

in 

39/64 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-5/8 

in 

1-5/8 

in 

1/4 in 1/4 in 

1/4 in 1/4 in 

9/32 in 9/32 in 

9/32 in 9/32 in 

9/32 in 9/32 in 

9/32 in 9/32 in 

9/32 in 9/32 in 

9/32 in 9/32 in 

9/32 in 9/32 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

9/16 in 

9/16 in 

1-3/4 in 9/16 in 

23/32 

in 

23/32 

in 

11/16 

in 

R 

Dim. 

5/32 

in 

5/32 

in 

5/32 

in 

5/32 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

17/64 

in 

17/64 

in 

17/64 

in 

17/64 

in 

17/64 

in 

17/64 

in 

Weight 

Each 

(lbs.) 

0.04 lb 

0.07 lb 

0.04 lb 

0.04 lb 

0.05 lb 

0.08 lb 

0.06 lb 

0.08 lb 

0.06 lb 

0.07 lb 

0.07 lb 

0.12 lb 

0.17 lb 

0.19 lb 

0.18 lb 

0.36 lb 

0.36 lb 

3/8 in 0.52 lb 

3/8 in 0.52 lb 

13/32 

in 

0.71 lb 

1354


Hook 

Size 

Size 


Kit 

Type 

Cam-Alloy 

Sling Hook 

Cam-Alloy 

Sling Hook 

with Latch 

Quik-Alloy 

Sling Hook 

1/4 in 2-22 3990101 020418072727 916-G - - - - 

1/4 in 2-22 3991401 020418177088 916-U - - - - 

5/16 in 3-23 3990201 020418072734 916-G - - - - 

5/16 in 3-23 3991402 020418177095 916-U - - - - 

- 4-24 3990301 020418072741 916-G - - - - 

- 4-24 3991403 020418177101 916-U - - - - 

3/8 in 5-25 3990401 020418072758 916-G 5644415 5644495 5744415 5744495 

3/8 in 5-25 3991404 020418177118 916-U - - - - 

- 6-26 3990501 020418072765 916-G - - - - 

7/16 in 7-27 3990601 020418072772 916-G 5644615 5644695 5744615 5744695 

7/16 in 7-27 3991405 020418177125 916-U - - - - 

- 8-28 3990701 020418072789 916-G 5644815 5644895 5744815 5744895 

1/2 in 9-29 3990801 020418072796 916-G - - - - 

1/2 in 9-29 3991406 020418177132 916-U - - - - 

- 10-30 3990901 020418072802 916-G - - - - 

5/8 in 11-31 3991001 020418072819 916-G 

5645015 & 

5645215 

5645095 & 

5645295 

5745015 & 

5745215 

Quik-Alloy 

Sling Hook 

with Latch A Dim. B Dim. C Dim. D Dim. 

23/32 

5745095 & 

5745295 

5/8 in 11-31 3991407 020418177149 916-U - - - - 

in 

23/32 

in 

23/32 

in 

23/32 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

- 12-32 3991101 020418072826 916-G - - - - 2 in 

- 12-32 3991408 020418177156 916-U - - - - 2 in 

- 34 3991409 020418177163 916-U 

5645415 & 

5641615 

5645495 & 

5641695 

- - 

2-3/16 

in 

E 

Dim. 

F Dim. 

9/16 in 1-1/4 in 5/8 in 1/4 in 1/4 in 

9/16 in 1-1/4 in 5/8 in 1/4 in 1/4 in 

9/16 in 1-3/8 in 

9/16 in 1-3/8 in 

25/32 in 

25/32 in 

25/32 in 

25/32 in 

25/32 in 

1-17/32 

in 

1-17/32 

in 

1-11/16 

in 

1-11/16 

in 

1-31/32 

in 

25/32 in 1-7/8 in 

25/32 in 1-7/8 in 

1 in 2-3/8 in 

1 in 

1 in 

1 in 

2-11/16 

in 

2-11/16 

in 

2-31/32 

in 

1 in 3-7/32 in 

1 in 3-7/32 in 

1-17/32 

in 

1-17/32 

in 

1-3/4 in 

39/64 

in 

39/64 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

15/16 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

1-9/32 

in 

3-7/16 in 1-5/8 in 

3-7/16 in 1-5/8 in 

4-11/32 

in 

1-3/4 in 

1/4 in 1/4 in 

1/4 in 1/4 in 

9/32 

in 

9/32 

in 

9/32 

in 

9/32 

in 

9/32 

in 

9/32 

in 

9/32 

in 

9/32 in 

9/32 in 

9/32 in 

9/32 in 

9/32 in 

9/32 in 

9/32 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

3/8 in 9/16 in 

9/16 

in 

9/16 

in 

9/16 

in 

23/32 

in 

23/32 

in 

11/16 

in 

R 

Dim. 

5/32 

in 

5/32 

in 

5/32 

in 

5/32 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

3/16 

in 

17/64 

in 

17/64 

in 

17/64 

in 

17/64 

in 

17/64 

in 

17/64 

in 

Weight 

Each 

(lbs.) 

0.04 lb 

0.07 lb 

0.04 lb 

0.04 lb 

0.05 lb 

0.08 lb 

0.06 lb 

0.08 lb 

0.06 lb 

0.07 lb 

0.07 lb 

0.12 lb 

0.17 lb 

0.19 lb 

0.18 lb 

0.36 lb 

0.36 lb 

3/8 in 0.52 lb 

3/8 in 0.52 lb 

13/32 

in 

0.71 lb 

18 


1355


Swivels 


Eye & Eye C-272-G 

Campbell carbon swivels are all drop-forged and normalized. They meet the design 

Jaw & Eye C-275-G requirements of Federal Specification RR-C-271. Galvanizing is to ASTM A153 

specification. 

Eye & Eye 

Swivel 

Jaw & Eye 

Swivel 


USING SWIVELS. 

WARNING 



• Use swivels only as indicated. 

• Swivels must always be inspected for wear, distortion and damage before 



• Do not angle load. 


1. These swivels are designed for a straight line pull only. 

2. These swivels are not designed to swivel under load. 


Working Load Limits — Swivels 

Size 

Carbon WLL 

in. mm ton kg 

1⁄4 6 850 386 

5⁄16 8 1250 568 

3⁄8 10 2250 1022 

1⁄2 13 3600 1634 

5⁄8 16 5200 2361 

3⁄4 19 7200 3269 

7⁄8 22 10,000 4540 

1 25 12,500 5675 

1-1⁄4 32 18,000 8172 


Drop Forged Eye & Eye Swivels, Galvanized, C-272-G 


■■Galvanized to ASTM A-153 Specification 


■■Meets Federal Specification RR-C-271 Type VII, Class 2 





Working 

Load Limit A Dim. B Dim. C Dim. D Dim. L Dim. R Dim. 

Weight Each 

(lbs.) 

1/4 in 3630435 020418069901 850 lb 1-1/4 in 3/4 in 3/4 in 1-1/16 in 3-3/8 in 2-7/8 in 0.16 lb 

5/16 in 3630535 020418069918 1250 lb 1-5/8 in 3/4 in 1 in 1-1/4 in 4-1/8 in 3-5/8 in 0.29 lb 

3/8 in 3630635 020418069925 2250 lb 2 in 1 in 1-1/4 in 1-1/2 in 5 in 4-1/4 in 0.64 lb 

1/2 in 3630835 020418069932 3600 lb 2-1/2 in 1-1/4 in 1-1/2 in 1-15/16 in 6-3/4 in 5-3/4 in 1.32 lb 

5/8 in 3631035 020418069949 5200 lb 3 in 1-5/8 in 1-3/4 in 2-3/8 in 8 in 6-3/4 in 2.52 lb 

3/4 in 3631235 020418069956 7200 lb 3-1/2 in 1-3/4 in 2 in 2-1/2 in 8-3/4 in 7-1/4 in 3.75 lb 

7/8 in 3631435 020418069963 10000 lb 4 in 2-1/8 in 2-1/4 in 3-1/16 in 10-3/8 in 8-3/4 in 6.02 lb 

1 in 3631635 020418069970 12500 lb 4-1/2 in 2-1/4 in 2-1/2 in 3-1/2 in 11-3/4 in 9-3/4 in 8.84 lb 

1-1/4 in 3632035 020418069987 18000 lb 5-5/8 in 3-1/4 in 3-1/8 in 3-7/8 in 13-15/16 in 11-1/2 in 16.75 lb 

1356


Eye & Eye Swivels (Import) 








Trade 

Size Cat. No. UPC No. Finish A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. 






Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Shelf 

Pack 

Qty. 

Case 

Pack 

Qty. 

Drop Forged Jaw & Eye Swivels, Galvanized, C-275-G 


■■Galvanized to ASTM A-153 Specification 


■■Meets Federal Specification RR-C-271 Type VII, Class 3 




18 

Trade 


Working 

Load Limit A Dim. B Dim. C Dim. K Dim. L Dim. N Dim. P Dim. R Dim. 

Weight 

Each (lbs.) 

1/4 in 3640435 020418069994 850 lb 1-1/4 in 3/4 in 3/4 in 1/2 in 3-5/32 in 3/4 in 1/4 in 2-7/16 in 0.22 lb 

5/16 in 3640535 020418070006 1250 lb 1-5/8 in 3/4 in 1 in 1/2 in 3-3/4 in 13/16 in 5/16 in 2-7/8 in 0.34 lb 

3/8 in 3640635 020418070013 2250 lb 2 in 1 in 1-1/4 in 11/16 in 4-5/8 in 1-1/16 in 3/8 in 3-1/2 in 0.73 lb 

1/2 in 3640835 020418070020 3600 lb 2-1/2 in 1-1/4 in 1-1/2 in 3/4 in 6-1/8 in 1-3/8 in 1/2 in 4-11/16 in 1.26 lb 

5/8 in 3641035 020418070037 5200 lb 3 in 1-5/8 in 1-3/4 in 15/16 in 7-3/8 in 1-1/2 in 5/8 in 5-1/2 in 2.35 lb 

3/4 in 3641235 020418070044 7200 lb 3-1/2 in 1-3/4 in 2 in 1-1/8 in 8 in 1-3/4 in 3/4 in 5-7/8 in 3.50 lb 

7/8 in 3641435 020418070051 10000 lb 4 in 2-1/8 in 2-1/4 in 1-3/16 in 9-3/8 in 2-1/16 in 7/8 in 7 in 5.80 lb 

1 in 3641635 020418070068 12500 lb 4-1/2 in 2-1/4 in 2-1/2 in 1-3/4 in 11-7/16 in 2-7/16 in 1-1/8 in 8-5/8 in 9.50 lb 

1-1/4 in 3642035 020418070075 18000 lb 5-5/8 in 3-1/4 in 3-1/8 in 2-1/16 in 13-1/2 in 2-13/16 in 1-3/8 in 8-7/16 in 16.75 lb 


1357


Thimbles 

Manila Rope 

Heavy Wire Rope 

C-83-G 

C-765-G 

MANILA ROPE 

THIMBLE 

HEAVY WIRE ROPE 

THIMBLE 


USING THIMBLES. 

Campbell ® thimbles are all made of hot rolled, mild steel. They are all galvanized to 

ASTM A-153 Specification. 


1. A thimble is a wear pad that protects the rope from cuts and kinking. 

WARNING 



• Thimbles must always be inspected for cracks and wear before use. 

If worn, distorted or damaged, discard and replace. 

• Use thimbles only as indicated. 

• The thimble size must exactly correspond to the diameter of the rope 

being used. Never use a smaller thimble, because it will pinch the rope 

and cause broken and/or displaced wires. 

Always use an appropriate thimble when making an eye in a rope. 

2. When it is necessary to open a thimble to insert a fitting, make sure the points 

are properly aligned when the thimble is closed. Inspect carefully for cracks. 

3. Thimbles are not designed for load carrying purposes; therefore working load 

limits have not been established. 


Manila Rope Thimbles, Galvanized, C-83-G 

■■Standard Material: Hot Rolled, Mild Steel 


■■Meets Design Requirements of Federal Specifications FF-T-276B, Type 1 

■■A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and 

Abrasions. Always Use An Appropriate Thimble When Making An Eye in 

a Rope. 

■■When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure 

the Points are Properly Aligned When the Thimble is Closed. Inspect 

Carefully for Cracks. 

■■Thimbles ARE NOT Designed for Load Carrying Purposes; Therefore 

Working Load Limits Have Not Been Established. 

For Rope Diameter Cat. No. UPC No. Pin Diameter A Dim. B Dim. C Dim. Weight Each (lbs.) 

3/8 in 6260301 020418091827 7/16 in 1/2 in 1 in 1/2 in 0.03 lb 

1/2 in 6260302 020418091834 11/16 in 3/4 in 1-5/16 in 23/32 in 0.10 lb 

5/8 in 6260303 020418091841 13/16 in 7/8 in 1-1/2 in 3/4 in 0.11 lb 

3/4 in 6260304 020418091858 1-1/16 in 1-1/8 in 1-13/16 in 31/32 in 0.16 lb 

1358


Heavy Wire Rope Thimbles, Galvanized, C-765-G 

■■Standard Material: Hot Rolled, Mild Steel 

■■Galvanized 


■■A Thimble is a Wear Pad That Protects the Rope From Cuts, 

Kinking and Abrasions. Always Use An Appropriate Thimble When 

Making An Eye in a Rope. 

■■When it is Necessary to Open a Thimble to Insert a Fitting, Make 

Sure the Points are Properly Aligned When the Thimble is Closed. 

Inspect Carefully for Cracks. 

■■Thimbles ARE NOT Designed for Load Carrying Purposes; 

Therefore Working Load Limits Have Not Been Established. 


For Wire Rope 

Size B Dim. C Dim. D Dim. F Dim. L Dim. P Dim. W Dim. 

Weight 

Each (lbs.) 

1/4 in 6260201 020418091711 1/4 1-5/8 in 7/8 in 9/32 in 1/16 in 2-1/8 in 13/16 in 1-1/2 0.07 lb 

5/16 in 6260202 020418091728 5/16 1-7/8 in 1-1/16 in 3/8 in 5/64 in 2-1/2 in 15/16 in 1-13/16 0.12 lb 

3/8 in 6260203 020418091735 3/8 2-1/8 in 1-1/8 in 7/16 in 7/64 in 3 in 1-1/16 in 2-1/8 0.19 lb 

1/2 in 6260205 020418091759 1/2 to 9/16 2-3/4 in 1-1/2 in 5/8 in 9/64 in 3-5/8 in 1-7/16 in 2-11/16 0.49 lb 

5/8 in 6260206 020418091766 5/8 3-1/4 in 1-3/4 in 11/16 in 5/32 in 4-1/4 in 1-5/8 in 3-1/8 0.72 lb 

3/4 in 6260207 020418091773 3/4 3-3/4 in 2 in 13/16 in 7/32 in 5 in 1-7/8 in 3-13/16 1.41 lb 

7/8 in 6260208 020418091780 7/8 4-1/4 in 2-1/4 in 15/16 in 7/32 in 5-1/2 in 2-1/8 in 4-1/4 1.85 lb 

1 in 6260209 020418091797 1 4-1/2 in 2-1/2 in 1-1/16 in 1/4 in 6-1/8 in 2-3/8 in 4-15/16 3.00 lb 

1-1/8 in 6260210 020418091803 1-1/8 to 1-1/4 5-1/8 in 2-7/8 in 1-5/16 in 1/4 in 7 in 2-3/4 in 5-7/8 3.68 lb 

18 

Weldless Sling Links – 

C-821-S, C-821-G, A-821-O 

SLING LINK 


USING THESE LINKS. 

Campbell ® links are all drop-forged and heat treated. Galvanizing is to 

ASTM A-153 specification. 


1. Make sure the link has a working load limit compatible with 

that of the chain or wire rope with which it is used. 

2. Do not exceed WLL See table below. 

3. The WLL can be significantly reduced under the following conditions: 

Wear and/or Distortion 

Extreme Heat 

Weld Spatter 

If link is exposed to any of these conditions, discard it. 

Working Load Limits (lb and kg) - Links 

Sling Link 

Size Carbon WLL Alloy WLL 

in. mm ton kg ton kg 

3⁄8 10 1600 726 2600 1180 

1⁄2 13 2900 1317 4000 1816 

5⁄8 16 4200 1907 5800 2633 

3⁄4 19 6000 2724 8200 3723 

7⁄8 22 8300 3768 -- -- 

1 25 10800 4903 -- -- 

WARNING 



• Use links only as indicated. 

• Links must always be inspected for wear and distortion before use. 


• Do not weld on these links. 



1359


Weldless Sling Links, C-821-S, C-821-G 

■■Drop-Forged Heat-Treated Carbon Steel 


■■Standard Finish is Painted Blue or Galvanized to Meet ASTM A-153 Specifications 

■■Make Sure the Link Has a Working Load Limit Compatible With That of the Chain or Wire 

Rope With Which it is Used. 

■■The Working Load Limit Can Be Significantly Reduced Under Wear and/or Distortion, Extreme 

Heat, and Weld Splatter. If the Link is Exposed to Any of These Conditions, Discard It. 

■■DO NOT WELD On These Links 



Working Load 

Limit A Dim. B Dim. C Dim. 

Weight Each 

(lbs.) 

3/8 in 3625115 020418069703 Carbon Steel Painted Blue 1600 lb 2-1/4 in 1-1/2 in 3/4 in 0.23 lb 

3/8 in 3625135 020418069710 Carbon Steel Galvanized 1600 lb 2-1/4 in 1-1/2 in 3/4 in 0.30 lb 

1/2 in 3625215 020418069727 Carbon Steel Painted Blue 2900 lb 3 in 2 in 1 in 0.60 lb 

1/2 in 3625235 020418069734 Carbon Steel Galvanized 2900 lb 3 in 2 in 1 in 0.50 lb 

5/8 in 3625315 020418069741 Carbon Steel Painted Blue 4200 lb 3-3/4 in 2-1/2 in 1-1/4 in 1.10 lb 

5/8 in 3625335 020418069758 Carbon Steel Galvanized 4200 lb 3-3/4 in 2-1/2 in 1-1/4 in 1.10 lb 

3/4 in 3625415 020418069765 Carbon Steel Painted Blue 6000 lb 4-1/2 in 3 in 1-1/2 in 1.90 lb 

3/4 in 3625435 020418069772 Carbon Steel Galvanized 6000 lb 4-1/2 in 3 in 1-1/2 in 1.90 lb 

7/8 in 3625515 020418069789 Carbon Steel Painted Blue 8300 lb 5-1/4 in 3-1/2 in 1-3/4 in 2.90 lb 

7/8 in 3625535 020418069796 Carbon Steel Galvanized 8300 lb 5-1/4 in 3-1/2 in 1-3/4 in 2.90 lb 

1 in 3625615 020418069802 Carbon Steel Painted Blue 10800 lb 6 in 4 in 2 in 4.30 lb 

1 in 3625635 020418069819 Carbon Steel Galvanized 10800 lb 6 in 4 in 2 in 4.30 lb 


Weldless Sling Links, A-821-O 

■■Drop-Forged Heat-Treated Alloy Steel 


■■Standard Finish is Painted Orange 

■■Make Sure the Link Has a Working Load Limit Compatible With That of the Chain or Wire 

Rope With Which it is Used. 

■■The Working Load Limit Can Be Significantly Reduced Under Wear and/or Distortion, Extreme 

Heat, and Weld Splatter. If the Link is Exposed to Any of These Conditions, Discard It. 

■■DO NOT WELD On These Links 



Working Load 

Limit A Dim. B Dim. C Dim. 

Weight Each 

(lbs.) 

3/8 in 3626115 020418069826 Alloy Steel Painted Orange 2600 lb 2-1/4 in 1-1/2 in 3/4 in 0.23 lb 

1/2 in 3626215 020418069833 Alloy Steel Painted Orange 4000 lb 3 in 2 in 1 in 0.60 lb 

5/8 in 3626315 020418069840 Alloy Steel Painted Orange 5800 lb 3-3/4 in 2-1/2 in 1-1/4 in 1.10 lb 

1360


Regular Nut Eyebolts – C-436-G 

REGULAR NUT EYEBOLT 

READ AND UNDERSTAND THESE WARNINGS AND INSTRUCTIONS AND 

FOLLOW ALL EYEBOLT SAFETY INFORMATION PRESENTED HERE BEFORE 

USING EYEBOLT ASSEMBLIES. 

Campbell carbon steel eyebolts are all drop-forged and normalized. Galvanizing is to 



1. Make sure the eyebolt is properly seated by screwing it down completely and 

tightening the nut securely against the load. 

2. An eyebolt must be installed into a tapped hole with a minimum depth of two 

times the shank diameter. 

WARNING 



• Loads may slip or fail if proper eyebolt assembly and lifting procedures 

are not used. 

• A falling load can seriously injure or kill. 

• Eyebolts must always be inspected for wear and distortion before use. 


• Do not use regular nut eyebolts for angular lifting. 

• Never machine, cut or grind an eyebolt. 


3. Make sure the threads on the shank and in the hole are clean and undamaged. 

4. Loads must always be applied parallel to the plane of the eye and never across 

the plane of the eye. 

5. Always lift the load with a steady, even pull. Do not shock load. 

6. Do not exceed working load limit (WLL). See table below. The standard WLL’s are 

established for a vertical pull. 

7. Use only the heavy hex nuts supplied with the eyebolts. 

Regular Nut Eyebolts, C-436-G 


■■Working Load Limits Apply Only to Eyebolts in Lifting or Pulling Applications 

■■Regular Nut Eyeblots Are Not To Be Used For Angular Lifting. 


■■Make Sure the Eyebolt is Properly Seated by Screwing It Down Completely and Tightening the Nut 

Securely Against the Load. 

■■Eyebolts Must Be Installed Into a Tapped Hole With a Minimum Depth of two Times the Shank Diameter. 

■■Make Sure the Threads on the Shank and in the Hole are Clean and Undamaged. 

■■Always Lift the Load With a Steady, Even Pull. Do Not Shock Load 

■■Loads Must be Applied Parallel to the Plane of the Eye and Never Across the Plane of the Eye. 


18 

Shank Diameter Shank Length Cat. No. UPC No. 

Working Load 

Limit Thread Length A Dim. B Dim. 

Weight Each 

(lbs.) 

3/8 in 4-1/2 in 7150106 020418100789 1250 lb 2-1/2 in 3/4 in 1-1/2 in 0.28 lb 

3/8 in 6 in 7150107 020418100796 1250 lb 3 in 3/4 in 1-1/2 in 0.32 lb 

1/2 in 3-1/4 in 7150108 020418100802 2250 lb 1-1/2 in 1 in 2 in 0.52 lb 

1/2 in 6 in 7150109 020418100819 2250 lb 3 in 1 in 2 in 0.64 lb 



5/8 in 6 in 7150114 020418100864 3600 lb 3 in 1-1/4 in 2-1/2 in 1.14 lb 




3/4 in 6 in 7150119 020418100918 5200 lb 3 in 1-1/2 in 3 in 1.84 lb 





1361


Pad Eyes, C-20-S 

■■Widely Used on Farm Machinery, Trucks, Steel Hulled Marine 

Vessels and Material Handling Equipment 

■■Drop-Forged C-1038 Carbon Steel 

■■Standard Finish: Self-Colored 

Trade Size Cat. No. UPC No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. 

Weight Each 

(lbs.) 

1-1/2 in 7105301 020418100697 5/32 in 1-1/8 in 5/8 in 1 in 3/4 in 1-5/16 in 1/4 in 0.08 lb 

2 in 7105302 020418100703 3/16 in 1-1/2 in 3/4 in 1-1/16 in 7/8 in 1-5/8 in 3/8 in 0.17 lb 

4 in 7105303 020418100710 1/4 in 2-1/8 in 1 in 1-7/16 in 1-1/4 in 2-5/16 in 9/16 in 0.50 lb 

5 in 7105304 020418100727 15/16 in 2-5/8 in 1-1/4 in 1-3/4 in 1-9/16 in 2-7/8 in 11/16 in 0.93 lb 


Eye Nuts – C-776-G 

Eye Nuts, Carbon Steel, Normalized, C-776-G 

■■Drop-Forged Carbon Steel Normalized 



■■Do Not Exceed Working Load Limit (WLL). The Standard WLL's are established for a Vertical 

In-Line Pull 

■■Make Sure Eye Nuts are Properly Seated by Screwing them Down Completely 

■■Make Sure the Threads in the Hole are Clean and Undamaged 

■■Loads Must Always be Applied Parallel to the Plane of the Eye and Never Across the Plane 

■■Always Stand Clear of the Load and Lift Load With a Steady, Even Pull. Do Not Shock Load 

Size 


Tap 

Size (M) 

UNC-2B 

EYE NUT 


USING EYE NUTS. 

Campbell carbon eye nuts are all drop-forged and normalized. Galvanizing is to 



1. Do not exceed working load limit (WLL). The standard WLL’s are established 

for a vertical in-line pull. 

WARNING 



• Loads may slip or fail if proper assembly and lifting procedures 

are not used. 

• Use eye nuts only as indicated. 

• Eye nuts must always be inspected for wear, distortion and damage 

before use. If worn, distorted or damaged, discard and replace. 


2. Make sure the eye nuts are properly seated by screwing them down completely. 

3. Make sure the threads in the hole are clean and undamaged. 

4. Loads must always be applied parallel to the plane of the eye and never across 

the plane. 

5. Always stand clear of the load and lift the load with a steady, even pull. 

Do not shock load. 

Working 

Load 

Limit A Dim. C Dim. D Dim. E Dim. F Dim. G Dim. S Dim. T Dim. 

2 7100103 020418100420 3/8 in 1250 lb 1-5/8 in 1 in 1-17/64 in 3/4 in 9/16 in 15/32 in 5/16 in 2-3/64 in 0.20 lb 

3A 7100105 020418100444 1/2 in 2250 lb 2 in 1-1/4 in 1-1/2 in 1 in 13/16 in 19/32 in 3/8 in 2-15/32 in 0.28 lb 

4 7100106 020418100451 5/8 in 3600 lb 2-1/2 in 1-1/2 in 2-1/32 in 1-3/16 in 1 in 3/4 in 1/2 in 3-9/32 in 0.55 lb 

5 7100107 020418100468 3/4 in 5200 lb 3 in 1-3/4 in 2-7/16 in 1-7/16 in 1-1/4 in 7/8 in 5/8 in 3-15/16 in 1.13 lb 

6 7100108 020418100475 7/8 in 7200 lb 3-1/2 in 2 in 2-9/16 in 1-5/8 in 1-3/8 in 1 in 3/4 in 4-5/16 in 1.53 lb 

7 7100109 020418100482 1 in 10000 lb 4 in 2-1/4 in 3-1/16 in 1-15/16 in 1-5/8 in 1-1/4 in 7/8 in 5-3/16 in 2.75 lb 

8 7100111 020418100505 1-1/4 in 15200 lb 4-1/2 in 2-1/2 in 3-1/2 in 2-1/8 in 1-13/16 in 1-5/16 in 1 in 5-13/16 in 3.80 lb 

Weight 

Each 

(lbs.) 

1362


Turnbuckles 

HOOK & EYE 

EYE & EYE 

JAW & JAW 

JAW & EYE 


USING TURNBUCKLES. 

Campbell carbon turnbuckles are all drop-forged and meet the design requirements 

of Federal Specification ASTM F-1145, Type 1, Grade 1. All types, except stub-end, 

are galvanized to ASTM A153 specifications. 


1. Turnbuckles are designed for a static load and are typically used with guy wires. 


3. In loads where there is vibration, lock nuts (jam nuts) should be 

used to prevent the connection from turning or loosening. 

4. The jaw ends come with different hardware depending on their 

size. Jaws from 1/4” through 5/8” have a hex head bolt and nut. Jaws LOCK NUT 

from 3/4” through 1-1/2” have cotter key and bolt. 

Hook & Eye 

Eye & Eye 

Jaw & Jaw 

Jaw & Eye 

C-778-G 

C-780-G 

C-788-G 

C-786-G 

Working Load Limits (lb and kg) of Turnbuckles 

Carbon 

Eye & Eye 

Jaw & Eye 

Jaw & Jaw 

WARNING 

Carbon 

Hook & 

Hook 

Hook & Eye 

Turnbuckle Size 

in. lb kg lb kg 

1/4 x 4 500 227 400 182 

5⁄16 x 4-1/2 800 363 700 318 

3⁄8 x 6 1200 545 1000 454 

1⁄2 x 6, 9, 12 2200 999 1500 681 

5⁄8 x 6, 9, 12, 18 3500 1589 2300 1044 

3⁄4 x 6, 9, 12, 18, 24 5200 2361 3000 1362 

7⁄8 x 12, 18 7200 3269 3600 1634 

1 x 6, 12, 18, 24 10000 4540 4200 1907 

11⁄4 x 12, 18, 24 15200 6901 5000 2270 



• Use turnbuckles only as indicated. 

• Turnbuckles must always be inspected for wear, distortion, cracks and 

damage before use. If worn, distorted or damaged, discard and replace. 

• Turnbuckles are not designed for angular loading, so the loading must be 

applied in a straight line. 

18 

Hook & Eye Turnbuckles, C-778-G 




■■Meets Design Requirements of ASTM F1145, Type 1, Grade 1, 

Class F 

■■IMPORTANT: Instructions For Use 

■■Turnbuckles are Designed for a Static Load 

■■In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should 

be Used to Prevent the Connection from Turning or Loosening 


Cat. No. UPC No. Working Load Limit Thread Diameter (A) Take Up (B) 

Closed Position Length 

(W) 

Weight Each (lbs.) 

6250101 020418086564 400 lb 1/4 in 4 in 7-13/16 in 0.29 lb 

6250103 020418086588 1000 lb 3/8 in 6 in 11-5/8 in 0.80 lb 

6250105 020418086595 1500 lb 1/2 in 6 in 13-1/8 in 1.56 lb 

6250106 020418086601 1500 lb 1/2 in 9 in 16-1/8 in 1.98 lb 

6250107 020418086618 1500 lb 1/2 in 12 in 19-1/8 in 2.46 lb 

6250111 020418086649 2300 lb 5/8 in 12 in 20-9/16 in 3.50 lb 


1363


Eye & Eye Turnbuckles, C-780-G 





Class D 






Cat. No. 

UPC No. 

Working 

Load Limit 

Thread 

Diameter 

(A) 

Take Up (B) 

Closed 

Position 

Length (W) E Dim. G Dim. H Dim. J Dim. 

Weight Each 

(lbs.) 

6250302 020418087059 800 lb 5/16 in 4-1/2 in 9-7/16 in 2 in 15/32 in 9/32 in 15/16 in 0.45 lb 

6250303 020418087066 1200 lb 3/8 in 6 in 11-13/16 in 2-11/32 in 9/16 in 11/32 in 1-1/8 in 0.84 lb 





6250313 020418087141 5200 lb 3/4 in 6 in 16-3/4 in 4-1/4 in 1-1/32 in 5/8 in 2-1/8 in 3.80 lb 

6250315 020418087165 5200 lb 3/4 in 12 in 22-3/4 in 4-1/4 in 1-1/32 in 5/8 in 2-1/8 in 5.74 lb 

6250324 020418087240 10000 lb 1 in 24 in 38-1/2 in 5-3/4 in 1-15/32 in 7/8 in 3 in 16.00 lb 

6250328 020418087264 15200 lb 1-1/4 in 18 in 35-3/8 in 7 in 1-27/32 in 1-1/8 in 3-9/16 in 23.22 lb 


Jaw & Jaw Turnbuckles, C-788-G 





Class G 

■■Jaws on Sizes 1/4” Through 5/8” Have Hex Head Bolt and Nut 

■■Jaws on Sizes 3/4” Through 1-1/2” Have Cotter Key and Bolt 






1364


Cat. No. UPC No. Working Load Limit Thread Diameter (A) Take Up (B) Closed Position Length (W) Weight Each (lbs.) 

6250501 020418087646 500 lb 1/4 in 4 in 7-15/16 in 0.35 lb 

6250502 020418087653 800 lb 5/16 in 4-1/2 in 9-5/16 in 0.51 lb 

6250503 020418087660 1200 lb 3/8 in 6 in 11-3/16 in 0.94 lb 

6250505 020418087677 2200 lb 1/2 in 6 in 12-3/4 in 1.70 lb 

6250506 020418087684 2200 lb 1/2 in 9 in 15-3/4 in 2.15 lb 

6250507 020418087691 2200 lb 1/2 in 12 in 18-3/4 in 2.65 lb 

6250510 020418087714 3500 lb 5/8 in 9 in 17-3/4 in 3.49 lb 

6250511 020418087721 3500 lb 5/8 in 12 in 20-3/4 in 4.00 lb 

6250513 020418087745 5200 lb 3/4 in 6 in 15-3/4 in 4.43 lb 

6250514 020418087752 5200 lb 3/4 in 9 in 18-3/4 in 5.18 lb 

6250515 020418087769 5200 lb 3/4 in 12 in 21-3/4 in 6.50 lb 

6250516 020418087776 5200 lb 3/4 in 18 in 27-3/4 in 7.60 lb 

6250519 020418087790 7200 lb 7/8 in 12 in 23-3/8 in 9.00 lb 

6250520 020418087806 7200 lb 7/8 in 18 in 29-3/8 in 12.08 lb 

6250521 020418087813 10000 lb 1 in 6 in 19-7/16 in 9.47 lb 

6250522 020418087820 10000 lb 1 in 12 in 25-7/16 in 12.90 lb 

6250523 020418087837 10000 lb 1 in 18 in 31-7/16 in 16.00 lb 

6250524 020418087844 10000 lb 1 in 24 in 37-7/16 in 17.85 lb 

6250527 020418087851 15200 lb 1-1/4 in 12 in 27-1/2 in 22.00 lb 

6250528 020418087868 15200 lb 1-1/4 in 18 in 33-1/2 in 25.60 lb 

6250529 020418087875 15200 lb 1-1/4 in 24 in 39-1/2 in 30.00 lb 

6250533 020418087899 21400 lb 1-1/2 in 18 in 37-1/4 in 40.70 lb 

6250534 020418163890 21400 lb 1-1/2 in 24 in 43-1/4 in 41.00 lb 

Cat. No. D Dim. H Dim. K Dim. L Dim. M Dim. P Dim. Q Dim. 

6250501 1-19/32 in 5/8 in 13/32 in 3/16 in 15/32 in 3/4 in 1/4 in 



6250505 2-5/8 in 1-3/16 in 5/8 in 5/16 in 3/4 in 1-1/16 in 3/8 in 





6250513 3-3/4 in 1-13/16 in 15/16 in 15/32 in 1-3/16 in 1-1/2 in 5/8 in 




6250519 4-3/8 in 2 in 1-1/8 in 19/32 in 1-3/8 in 1-3/4 in 3/4 in 

6250520 4-3/8 in 2 in 1-1/8 in 19/32 in 1-3/8 in 1-3/4 in 3/4 in 

6250521 5-7/32 in 2-3/16 in 1-3/16 in 3/4 in 1-9/16 in 2-1/16 in 7/8 in 




6250527 6-1/16 in 2-7/8 in 1-3/4 in 7/8 in 2 in 2-7/16 in 1-1/8 in 



6250533 8-1/2 in 3-1/4 in 2-1/16 in 1-3/32 in 2-5/16 in 2-13/16 in 1-3/8 in 

6250534 8-1/2 in 3-1/4 in 2-1/16 in 1-3/32 in 2-5/16 in 2-13/16 in 1-3/8 in 

18 


1365


Jaw & Eye Turnbuckles, C-786-G 




■■See Figure C-780-G for Eye Dimensions 

■■See Figure C-788-G for Jaw Dimensions 

■■Jaws on Sizes 1/4” Through 5/8” Have Hex Head Bolt and Nut; 

Jaws on Sizes 3/4” Through 1-1/2” Have Cotter Key and Bolt 






Cat. No. UPC No. Working Load Limit Thread Diameter (A) Take Up (B) 

Closed Position Length 

(W) 


6250403 020418087400 1200 lb 3/8 in 6 in 11-9/16 in 0.90 lb 

6250405 020418087417 2200 lb 1/2 in 6 in 13-1/8 in 1.64 lb 

6250406 020418087424 2200 lb 1/2 in 9 in 16-1/8 in 2.08 lb 

6250407 020418087431 2200 lb 1/2 in 12 in 19-1/8 in 2.57 lb 

6250409 020418087448 3500 lb 5/8 in 6 in 14-7/8 in 2.65 lb 

6250427 020418087592 15200 lb 1-1/4 in 12 in 28-9/16 in 19.80 lb 


Connecting Links 

REGULAR 

CONNECTING LINK 

PEAR SHAPED 

CONNECTING LINK 

Regular 

Pear Shape 


USING CONNECTED LINKS. 

Campbell carbon and alloy steel connecting links are all drop-forged and heat 

treated. Galvanizing is to ASTM A-153 specification. Connecting links are used to 

connect two pieces of chain or to connect a fitting to a chain. 


1. Make sure the connecting link used is the same size as the components being 

joined, e.g., a 3/8 in. connecting link is used with 3/8 in. chain. 

2. To effectively close the connecting link, peen the prongs (using a ball peen 

hammer) to fill the hole of the mating half as much as possible. 

3. Any assembly made using connecting links should be rated at the working load 

limit (WLL) of the weakest component. 

4. Do not exceed WLL. See table below. 

5. The WLL of connecting links is based on a straight line pull. 

Any side or shock loading will significantly reduce the actual WLL. 

C-752-S, C-752-G, A-752-S 

C-753-G 

Working Load Limits (lbs and kg) - Connecting Links 

Regular 

Pear Shaped 

Size Carbon Steel WLL Alloy WLL 

Carbon Steel 

WLL 

in. mm lb kg lb kg lb kg 

1⁄4 6 1400 636 * * 

5⁄16 8 2000 908 * * 

3⁄8 10 2800 1271 * 1850 840 

1⁄2 13 4750 2157 7000 3178 3300 1498 

5⁄8 16 7250 3292 10800 4903 5000 2270 

3⁄4 19 10250 4654 15000 6810 7100 3223 

7⁄8 22 * * 9600 4358 

1 25 15500 7037 * * 

*Item not manufactured. 

WARNING 



• Use connecting links only as indicated. 

• Do not use connecting links for overhead lifting. 

• Never re-use connecting links. 

• Connecting links must always be inspected for wear, distortion and 

tightness before use. If worn, distorted or damaged, discard and replace. 

1366


Regular Connecting Links, C-752-S, C-752-G, A-752-S 

■■Drop-Forged Heat-Treated Carbon or Alloy Steel 

■■Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 


■■For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much 

as Possible 

■■Meets Design Requirements of Federal Specification RR-C-271D, Type II 

■■Make Sure the Connecting Link Used is the Same Size as the Components Being 

Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain 

■■Any Assembly Made Using Connecting Links Should be Rated at the Working 

Load Limit of the Weakest Component. 

■■The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any 

Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. 

■■NEVER Re-Use a Connecting Link 


Trade 

Size Cat. No. UPC No. Material Finish 

Working 

Load Limit A Dim. B Dim. C Dim. D Dim. 

Weight 

Each (lbs.) 

1/4 in 5200404 020418074677 Carbon Steel Self-Colored 1400 lb 1 in 1-1/2 in 7/16 in 7/8 in 0.06 lb 10 

1/4 in 5200434 020418074684 Carbon Steel Galvanized 1400 lb 1 in 1-1/2 in 7/16 in 7/8 in 0.06 lb 10 

5/16 in 5200504 020418074691 Carbon Steel Self-Colored 2000 lb 1-3/16 in 1-3/4 in 1/2 in 1 in 0.12 lb 10 

5/16 in 5200534 020418074707 Carbon Steel Galvanized 2000 lb 1-3/16 in 1-3/4 in 1/2 in 1 in 0.11 lb 10 

3/8 in 5200604 020418074714 Carbon Steel Self-Colored 2800 lb 1-3/8 in 2-1/8 in 9/16 in 1-1/8 in 0.18 lb 10 

3/8 in 5200634 020418074721 Carbon Steel Galvanized 2800 lb 1-3/8 in 2-1/8 in 9/16 in 1-1/8 in 0.18 lb 10 



1/2 in 5208805 020418075032 Alloy Steel Self-Colored 7000 lb 1-23/32 in 2-11/16 in 21/32 in 1-7/16 in 0.39 lb 10 






Shelf Pack 

Qty. 

18 

Pear Shaped Connecting links, C-753-G 

■■Drop-Forged Heat-Treated Carbon Steel 



■■For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as 

Much as Possible 

■■Make Sure the Connecting Link Used is the Same Size as the Components 

Being Joined. 

■■Any Assembly Made Using Connecting Links Should be Rated at the Working 

Load Limit of the Weakest Component. 

■■The Working Load Limit of Connecting Links is Based on a Straight Line Pull. 

Any Side or Shock Loading Will Significantly Reduce the Actual Working Load 

Limit. 

■■NEVER Re-Use a Connecting Link 



Working Load 

Limit B Dim. C Dim. D Dim. E Dim. 

Weight Each 

(lbs.) 

3/8 in 5205634 020418074912 1850 lb 2-15/16 in 13/16 in 2 in 9/16 in 0.29 lb 

1/2 in 5205834 020418074936 3300 lb 3-5/8 in 1 in 2-1/2 in 11/16 in 0.52 lb 

5/8 in 5206035 020418074950 5000 lb 4-1/4 in 1-1/8 in 2-3/4 in 13/16 in 0.91 lb 

3/4 in 5206235 020418074974 7100 lb 4-7/8 in 1-1/4 in 3-1/8 in 1 in 1.30 lb 

7/8 in 5206435 020418074998 9600 lb 5-11/16 in 1-1/2 in 3-11/16 in 1-1/4 in 2.20 lb 


1367

B L O C K S 

Definitions: Important Block Terms 

Bight: 

The area formed by the angle of the incoming and 

outgoing line 

Fairleading: 

To change the direction of pull on a lead rope. 

Line Pull: 

The line pull is the amount of force transmitted to the 

rope by the winch, or other forms of power. All 

Working Load Limits are based on “resultant loads.” 

Mechanical Advantage: The amount by which a block system multiplies the force 

(or load) applied to it. 

Parts of Line: The number of lines needed for a given load. 

Loads 

Ton: 

Proof Test: 

Ton is equal to 2240 LB unless otherwise noted. 

Campbell ® has the ability to proof test all blocks and 

fittings. The usual proof test is twice the Working Load 

Limit. Proof testing and certifications can be performed at 

customer’s request, for a nominal charge. 

Side Load: 

The result of a load which is applied off-center. 

Shock Load: 

The result of rapid application of force (such as impacting 

and/or jerking), or the rapid movement of a static load. 

Ultimate Load: The average load at which a product fails, or no longer 

supports the load. 

Working Load Limit: The Working Load Limit (WLL) is the maximum resultant 

load which should ever be applied to the product in 

service, even when new, and when the load is uniformly 

applied in direct tension. 

Caution should be used when determining the resultant load, as the manner in 

which the product is used can increase the load. 


Warning Statement - Blocks 

BLOCK USE AND MAINTENANCE INFORMATION: 

Read, understand and follow these warnings and instructions prior to selection, maintenance and use of tackle block sytems. 

Falling load may cause death or serious injury 

• Do Not exceed “Working Load Limit” 

• Do Not stand under load or in bight 

• Do Not side load or shock load 

• Do Not use worn or damaged block or rope 

IMPORTANT: Read and understand the instructions and warnings before using this 

block. It is the responsibility of the employer to place this information into the hands 

of the operator. 

INSTRUCTIONS FOR USE 

• Do Not exceed the “Working Load Limit” of the block(s) being used. Check the 

label on the block or refer to the Apex Tool Group catalog 

• Do Not exceed the “Working Load Limit” or operating limitations of the rope being 

used. If uncertain, consult the rope manufacturer 

• Use the recommended rope diameter. See the label or Apex Tool Group catalog 

• Know the weight of the load to be lifted and the conditions of the lift. For 

Important Information 

Block systems must be properly designed, used and maintained. A continual inspection 

program should be undertaken to discover gouges, distortion, cracks, elongation 

(or stretching), spread in the throat openings of hooks, severe wear or other 

damage. Any abuse, misuse or alteration may lessen the load a block system will 

sustain. Some examples of changes are as follows: 

• Twisting or side loading 

• Disfigurement 

• Corrosion 

• Shock loading 

Selection of Blocks 

To select a block to fit your requirements, the following must be considered: 

1. Are there regulations that could affect the choice of blocks, such as federal, 

OSHA, state, maritime, etc. 

2. What loads (weight) will be lifted? This must be known to select a block with an 

appropriate work load limit. 

3. How many parts of line are required? (See “Method of Figuring”) 

4. What is the size, type and working load limit of rope to be used? Consult a rope 

catalog to determine working load, rope strength and fatigue factors. 

WARNING 

example, a flat load embedded in mud will require extra pulling power to break 

the vacuum and may create a shock load 

• Be sure there are no impediments in the way of the lift that could snag the load 

and increase the load on the block(s) 

• Blocks used above or aloft should be attached with shackles 

• Do Not side load or shock load blocks. When using snatch blocks, be sure that 

the block is closed properly before the load is applied 

• Snatch blocks should not be used for hoisting: they should be used for 

fairleading only 

• Do Not stand under the load or in the bight area. Do Not stand in the direct line 

of pull of any load 

• Be sure the structural member to which the block is being attached is strong 

enough to support the load 

Assure proper lubrication of the block. Improper lubrication can lead to block 

failure. Read and follow lubrication schedules. 

• Use for a purpose other than that for which a particular block was intended 

• Use to carry a load in excess of the Working Load Limit 

Blocks consist of one or more sheaves fitted in a wood or metal shell. Blocks are 

supported by a fitting attached to the strap of the block. These blocks are intended 

to be used in conjunction with other components in a load-sustaining system to gain 

mechanical advantage. Care should be taken to select components of compatible 

type, size and Working Load Limit. 

Work Load Limits shown in Apex Tool Group literature are applicable to new 

blocks, or blocks in “as new” condition. 

5. What is the speed of the line? This will help determine what type of bearing 

should be used. 

6. Insure that the proper type of fitting is utilized. A block used above or aloft should 

be attached with shackles. 

7. How will the block be reeved, and does it require a dead end becket? (See 

“Method of Reeving Manila and Wire Rope Blocks”) 

8. What is the fleet angle of the wire line? Line entrance and exit angles should be 

no more than 90°. Use the bight angle factor to determine resultant load to 

properly determine Working Load Limit of your block. 

1368

B L O C K S 

Block Inspection and Maintenance 

• Carefully examine the block(s) and rope(s) for wear and damage before each use 

• Do not use a block if the sheaves do not turn freely. Sheaves must turn freely. 

Tight sheaves could indicate worn bushings or bearings 

• Do not use a block with excessive play in the sheave. Check for excessive play in 

the sheave. Excessive play could indicate worn bushings or bearings 

• Do not use a block with a loose becket bolt or rope splice. Check the becket bolt 

holding the dead end of the rope; the becket bolt should be tight. The rope splice 

Lubrication 

The following represents the minimum recommended schedule for lubrication using 

medium viscosity lithium-based grease. Your own usage, including environmental 

factors and the frequency and type of use, may require lubrication that is more 

frequent. 

SHEAVE BEARINGS 

Tapered Rollers: Every 40 hours of continuous operation or every 30 days of intermittent 

operation. 

Roller Type: Every 24 hours hours of continuous operation or every 14 hours of 

intermittent operation. 

on the becket should also be tight 

• Do not use a block with worn or frayed rope. Check the condition of the rope for 

fraying 

• Do not use a block with a damaged hook latch. Hooks on blocks should have a 

latch in proper operating condition. If the latch does not engage the tip of the 

hook, the hook could be sprung or opened due to an overload on a previous lift 

Bronze (Not self-lubricated): Every 8 hours of continuous operation or every 14 

days of intermittent operation. 

HOOK BEARINGS 

Anti-Friction: Every 14 days for frequent swiveling or every 45 days for infrequent 

swiveling. 

Bronze Thrust/No Bearings: Every 16 hours for frequent swiveling or every 21 

days for infrequent swiveling. 

Load on Blocks 

WARNING 

• The Working Load Limit (WLL) is the maximum resultant load which should ever be applied to a block and its fittings. Blocks 

used to fairlead (single sheave and snatch blocks) can be subjected to a load greater than the weight being lifted or pulled. 

Results of Applied Loads on Single Blocks 

Figure 

No. 1 

Resultant Load on Block 10 Tons 

Resultant Load on Block 5 Tons 

Figure 

No. 2 

To determine this load: 

1. Determine the bight angle of the line. 

2. Refer to Table 1 for the corresponding 

angle factor. 

3. Multiply the pull on the line or weight 

of the load (line pull) by the angle 

factor to obtain load on the block. 

18 

WARNING 

• The total weight (load) on a single sheave block or snatch block varies with the bight angle between the incoming and outgoing line to the block (see Figure 2). 

Bight Angle Factor 

Angle Factor Angle Factor Angle Factor Angle Factor 

0° 2.00 100° 1.29 50° 1.81 150° 0.52 

10° 1.99 110° 1.15 60° 1.73 160° 0.35 

20° 1.97 120° 1.00 70° 1.64 170° 0.17 

30° 1.93 130° 0.84 80° 1.53 180° 0.00 

40° 1.87 135° 0.76 90° 1.41 — — 

45° 1.84 140° 0.68 

Table 1 

Figure 

No. 3 


ADVERTENCIA 

• Antes de usar las pastecas, conozca el limite de carga de trabajo de los 

mismos. 

NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. 

• Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. 

WARNING 

• Know the Working Load Limit of the block, or blocks, to be used. 

DO NOT EXCEED THE WORKING LOAD LIMIT. 

• Working Loads are Resultant Working Loads. 

1369

B L O C K S 

Method of Reeving Manila and Wire Rope Blocks 

The method of reeving tackle blocks will vary with the applications. With heavy 

lift cargo booms, cranes and so forth, where blocks with four sheaves or more 

are required, a number of lead blocks have to be considered. The Campbell 

engineering department will be happy to assist on such applications. 

The methods of reeving tackle blocks 

will vary with the applications. 

Method of Figuring “Parts of Line” 

L 

P 

Parts of Line = 1 2 3 4 5 6 7 8 9 10 11 12 

“E” Factors 

= E 

L = Load lifted in pounds 

P = Line pull in pounds 

E = Efficiency factor 

For example: To figure “Parts of Line” required when load lifted “L” and line pull “P” are known. 

Bronze 

Bushed 

0.96 1.85 2.8 3.6 4.4 5.2 5.9 6.6 7.3 7.9 8.5 9.1 

Roller 

Bearing 

0.98 1.9 2.9 3.8 4.7 5.6 6.5 7.3 8.2 9.0 9.8 10.6 

32,000 lb. 

(Load lifted “L”) 

= 5.3 (“E”) 

6,000 lb. 

(Line pull “P”) 

You can see in the table at the right that 

an “E” factor of 5.3 requires 6 “Parts of Line”. 


Sheave, Bushing and Bearing Information 

Anti-friction Bearings (tapered, needle and ball bearings) are for faster line speeds 

and more frequent use at greater loads (minimum bearing friction). 

Iron Bushings (common bore) are very low speed lines and very infrequent use 

(high bearing friction). 

Bronze Bushings (self lubricating bronze, graphite bronze and pressure lubrication 

bronze) are for slow line speeds. 

Self-lubricating bronze and graphite bronze bushings are for infrequent use (moderate 

bearing friction). Pressure lubrication bronze bushings are for frequent use 

at greater loads (moderate bearing friction). The performance of bronze bushings 

is best determined by the “PV Factor” (maximum pressure velocity) at which the 

bearing is operating. This is the relationship between bearing pressure and bearing 

surface velocity. Brewer-Titchener bronze bushings have the following material 

properties: 

Maximum Bearing Pressure (BP): 4,500 pounds per square inch 

Maximum Bearing Velocity (BV): 1,200 feet per minute 

Maximum Pressure Velocity Factor (PV): 55,000 

(Due to material property relations, the maximum BP times the 

maximum BV is not equal to the maximum 

To calculate Bearing Pressure (BP): 

Line Pull x Bight Angle Factor 

BP = 

Shaft Diameter x Hub Width 

To calculate Bearing Velocity (BV): 

PV 

BV = 

BP 

To calculate Line Speed: 

LINE SPEED = 

BV (Tread Diameter + Rope Diameter) 

Shaft Diameter 

These formulas can be used to determine the maximum allowable line speed for 

a given total sheave load. The maximum allowable line speed should be equal to 

or exceeding the required line speed. If the required line speed is greater than the 

calculated maximum allowable line speed, increase the shaft diameter and/or the 

hub width. For example: 

Using a 12” diameter sheave (tread diameter = 10.25”; wire 

diameter = 0.75”; shaft diameter = 1.50”; hub width = 1.62”), 

a 5,000 lb. line pull and a 90° bight angle determine the 

allowable line speed. 

BP = (5,000 lb.) x (1.41*) / (1.50” x 1.62”) = 2,901 psi 

(line pull) (bight angle factor)/(shaft dia.) (hub width) 

BV = (55,000 psi.) / 2,901 = 19 FPM Allowable 

(PV factor) (BP) 

Line Speed = 19 x (10.25” + 0.75”) / 1.50” = 139 FPM Allowable 

(BV) (tread dia. + rope dia.) (shaft dia.) 

Testing of Blocks and Fittings for Commercial Marine Cargo Vessels 

The Campbell plant has the facilities to proof test and certify blocks and fittings to meet 

the safety standards established by most maritime nations. Following are the proof tests 

required for maritime certification. 

1. Shackles, hooks, links and swivels; proof tested to twice the working load limit. 

2. Multiple-sheave blocks up to 20-ton (18, 144-Kgs.) working load limit; proof tested to 

twice the working load limit. 

3. Multiple-sheave blocks with working load limits of 20-40 ton (18,144-36,288 Kgs.): 

proof tested to 20 ton (18, 144 Kgs.) in excess of the working load limit. 

4. Multiple-sheave blocks with working load limits over 40 ton 

(36,288 Kgs.): proof tested to 1.5 times the working load limit. 

5. Single blocks proof tested to 4 times the line pull. 

6. Cargo hoisters (6001 Series): proof tested to 4 times the line pull shown in the catalog. 

All other single blocks proof tested to twice the work load shown in the catalog, and 

marked with a working load one half that shown in the catalog. 

All blocks and fittings certified to maritime standards will be indelibly marked with working 

load, proof test and identifying number. All tests will be in long ton equal to 2,240 

pounds (1,016 Kgs.) 

NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are constantly 

improving the quality and design of our products, they can change without notice. 

1370

B L O C K S 

Regular Wood Shell Blocks for Manila Rope 

■■Hard Wood Shells 

■■Model 3001 Single Sheave, Model 3002 Double Sheave, Model 

3003 Triple Sheave 

■■Drop Forged Fittings 

■■Bronze Self-Lubricating Bushings 

■■Galvanized Metal Parts 

■■Working Loads are Resultant Working Loads 


Cat. No. 

UPC No. 

Block 

Size 

Number of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - OD 

Sheave 

Size - Rim 

Thickness 

Sheave 

Size - 

Center Pin 

Diameter 

7205336 020418165894 3 in Single Round Loose Hook "AF" 3/8 in 1-3/4 in 1/2 in 3/8 in 500 lb 1.00 lb 

7206836 020418165948 3 in Double Round Loose Hook "AF" 3/8 in 1-3/4 in 1/2 in 3/8 in 800 lb 1.50 lb 



7208536 020418166006 4 in Triple Round Loose Hook "AF" 1/2 in 2-1/4 in 5/8 in 3/8 in 1800 lb 3.58 lb 

7205434 020418104282 4 in Single Swivel Hook with Latch "G" 1/2 in 2-1/4 in 5/8 in 3/8 in 1000 lb 2.00 lb 

7206934 020418105210 4 in Double Swivel Hook with Latch "G" 1/2 in 2-1/4 in 5/8 in 3/8 in 1400 lb 3.00 lb 

7208534 020418106118 4 in Triple Swivel Hook with Latch "G" 1/2 in 2-1/4 in 5/8 in 3/8 in 1800 lb 4.00 lb 

7205435 020418104299 4 in Single Screw Pin Anchor Shackle "K" 1/2 in 2-1/4 in 5/8 in 3/8 in 1000 lb 2.00 lb 

7206935 020418105227 4 in Double Screw Pin Anchor Shackle "K" 1/2 in 2-1/4 in 5/8 in 3/8 in 1400 lb 3.00 lb 

7205536 020418165917 5 in Single Round Loose Hook "AF" 5/8 in 3 in 3/4 in 3/8 in 1200 lb 2.80 lb 

7207036 020418165962 5 in Double Round Loose Hook "AF" 5/8 in 3 in 3/4 in 3/8 in 1800 lb 4.20 lb 

7208636 020418166013 5 in Triple Round Loose Hook "AF" 5/8 in 3 in 3/4 in 3/8 in 2400 lb 5.50 lb 

7205535 020418104442 5 in Single Screw Pin Anchor Shackle "K" 5/8 in 3 in 3/4 in 3/8 in 1200 lb 2.50 lb 

7207035 020418105371 5 in Double Screw Pin Anchor Shackle "K" 5/8 in 3 in 3/4 in 3/8 in 1800 lb 4.00 lb 

7205636 020418165924 6 in Single Round Loose Hook "AF" 3/4 in 3-1/2 in 1 in 1/2 in 1800 lb 4.00 lb 

7207136 020418165979 6 in Double Round Loose Hook "AF" 3/4 in 3-1/2 in 1 in 1/2 in 2500 lb 8.00 lb 

7208736 020418166020 6 in Triple Round Loose Hook "AF" 3/4 in 3-1/2 in 1 in 1/2 in 3200 lb 9.00 lb 

7205635 020418104596 6 in Single Screw Pin Anchor Shackle "K" 3/4 in 3-1/2 in 1 in 1/2 in 1800 lb 4.00 lb 

7207135 020418105524 6 in Double Screw Pin Anchor Shackle "K" 3/4 in 3-1/2 in 1 in 1/2 in 2500 lb 6.50 lb 

7205835 020418104794 8 in Single Screw Pin Anchor Shackle "K" 1 in 4-3/4 in 1-1/8 5/8 in 2800 lb 9.50 lb 

7207335 020418105692 8 in Double Screw Pin Anchor Shackle "K" 1 in 4-3/4 in 1-1/8 5/8 in 3800 lb 13.00 lb 

Painter's Staging Blocks 

■■Model 3001J - Single Wood Shell Block with Becket and Long, 

Loose Hook 

■■Roller Bushed 

■■For 3/4" Manila Rope 

■■Galvanized Metal Parts 


Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

18 


Cat. No. 

UPC No. 

Block 

Size 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - 

OD 

Sheave 

Size - Rim 

Thickness 

Sheave Size 

- Center Pin 

Diameter 

7209803 020418106767 6 in Single Long Loose Hook "J" 3/4 in 3-1/2 in 1 in 1/2 in 1800 lb 5.00 lb 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

1371

B L O C K S 

Ideal Blocks for Manila Rope 

■■Steel Shells with Drop Forged Flat Hooks 

■■3031F Single Sheave and Features Blue Painted Finish and Bronze Self- 

Lubricating Bushings 

■■3032F Double Sheave and Features Galvanized Finish and Iron Bushing 



Cat. No. 

UPC No. 

Block 

Size 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - OD 

Sheave 

Size - Rim 

Thickness 

Sheave Size 

- Center Pin 

Diameter 

Working 

Load 

Limit 

Weight 

Each (lbs.) 

7231913 020418170126 4 in Double Flat Eye Loose Hook "F" 1/2 in 2-1/4 in 5/8 in 3/8 in 600 lb 1.40 lb 

7231533 020418207358 5 in Single Flat Eye Loose Hook "F" 5/8 in 3 in 3/4 in 3/8 in 700 lb 2.25 lb 

B & L Star Metal Blocks for Manila or Fiber Rope 

■■Model 3041 Single Sheave, Model 3042 Double Sheave, Model 3043 Triple Sheave 

■■Steel Shells 






Cat. No. 

UPC No. 

Block 

Size 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - OD 

Sheave 

Size - Rim 

Thickness 

Sheave Size 

- Center Pin 

Diameter 


7245336 020418109041 3 in Single Screw Pin Anchor Shackle "K" 3/8 in 1-3/4 in 1/2 in 3/8 in 700 lb 1.50 lb 



7248535 020418172045 4 in Triple Round Loose Hook "AF" 1/2 in 2-1/4 in 5/8 in 3/8 in 2200 lb 4.50 lb 

7245434 020418109188 4 in Single Swivel Hook with Latch "G" 1/2 in 2-1/4 in 5/8 in 3/8 in 1100 lb 2.50 lb 

7247135 020418171963 6 in Double Round Loose Hook "AF" 3/4 in 3-1/2 in 1 in 1/2 in 3300 lb 10.58 lb 

7247136 020418110368 6 in Double Screw Pin Anchor Shackle "K" 3/4 in 3-1/2 in 1 in 1/2 in 3300 lb 9.50 lb 

7245836 020418109638 8 in Single Screw Pin Anchor Shackle "K" 1 in 4-3/4 in 1-3/8 in 5/8 in 3300 lb 11.00 lb 

7248936 020418111402 8 in Triple Screw Pin Anchor Shackle "K" 1 in 4-3/4 in 1-3/8 in 5/8 in 7000 lb 23.00 lb 

Gin or Roofer's Block for Manila Rope 

■■Model 3061V - Furnished with A Drop-Forged, Flat Swivel Hook with Latch 

■■Roller Bushing 

■■Blue Painted Finish 


■■Lift Should Not Exceed 500 lbs. 


Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

Cat. No. 

UPC No. 

Block 

Size 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - OD 

Sheave 

Size - Rim 

Thickness 

Sheave Size 

- Center Pin 

Diameter 

Working 

Load 

Limit 

Weight 

Each (lbs.) 

7269812 020418115387 12 in Single Swivel Hook with Latch "V" 1 in 12 in 1-3/8 in 5/8 in 1000 lb 13.00 lb 

1372

B L O C K S 

Drop Link Snatch Blocks for Manila Rope 

■■Wood or Steel Shells 

■■Cross-Bolted Shell 

■■Fittings Drop-Forged; Metal Parts Galvanized 


■■Drop Link Snatch Blocks Are Primarily Used As Lead Blocks 

■■Not Recommended for Hoisting 



Cat. No. 

UPC No. 

Block 

Size 

Block Type 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - 

OD 

Sheave 

Size - Rim 

Thickness 

Bearing 

Diameter 

Sheave 

Size - 

Center 

Pin 

Diameter 

7265486 020418112881 4 in Wood, 3071 Single Swivel Hook with Latch "V" 3/4 in 2 in 7/8 in 5/8 in 3/8 in 750 lb 2.00 lb 

7265686 020418113130 6 in Wood, 3071 Single Swivel Hook with Latch "V" 7/8 in 3 in 1-1/8 in 3/4 in 1/2 in 2400 lb 7.20 lb 

7265696 020418113192 6 in Steel, 3073 Single Swivel Hook with Latch "V" 7/8 in 3 in 1-1/8 in 3/4 in 1/2 in 2400 lb 7.40 lb 

7265886 020418113420 8 in Wood, 3071 Single Swivel Hook with Latch "V" 1 in 4-1/2 in 1-3/8 in 7/8 in 5/8 in 4800 lb 12.50 lb 

7265896 020418113482 8 in Steel, 3073 Single Swivel Hook with Latch "V" 1 in 4-1/2 in 1-3/8 in 7/8 in 5/8 in 4800 lb 13.00 lb 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

■■Wood or Steel Shells 


■■Drop Forged Galvanized Fittings 



Safety Locking Snatch Blocks for Manila Rope 

18 

Cat. No. 

UPC No. 

Block 

Size 

Block Type 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - 

OD 

Sheave 

Size - Rim 

Thickness 

Bearing 

Diameter 

Sheave 

Size - 

Center 

Pin 

Diameter 

7267186 020418114250 6 in Wood, 3072 Single Swivel Hook with Latch "V" 7/8 in 3 in 1-1/8 in 3/4 in 1/2 in 3000 lb 9.00 lb 

7267196 020418114311 6 in Steel, 3074 Single Swivel Hook with Latch "V" 7/8 in 3 in 1-1/8 in 3/4 in 1/2 in 3000 lb 6.00 lb 

7267396 020418114472 8 in Steel, 3074 Single Swivel Hook with Latch "V" 1 in 4-1/2 in 1-3/8 in 7/8 in 5/8 in 5000 lb 12.50 lb 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 


1373

B L O C K S 

■■Nylon Shells and Sheaves 

■■Single 3101F, Double 3102F 

■■Fittings Are Drop-Forged 

■■Plated Strap and Connections 



Nylon Blocks for Manila Rope 

Cat. No. 

UPC No. 

Block 

Size 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - 

OD 

Sheave 

Size - Rim 

Thickness 

Bearing 

Diameter 

Sheave 

Size - 

Center Pin 

Diameter 

7222213 020418107320 2 in Double Flat Eye Loose Hook "F" 3/8 - 1/2 in 2 in 1-1/8 in 5/8 in 3/8 in 1000 lb 1.22 lb 

7220214 020418107276 2 in Single Swivel Hook with Latch "G" 3/8 - 1/2 in 2 in 1-1/8 in 5/8 in 3/8 in 500 lb 0.44 lb 

7222214 020418107337 2 in Double Swivel Hook with Latch "G" 3/8 - 1/2 in 2 in 1-1/8 in 5/8 in 3/8 in 1000 lb 1.60 lb 

Working 

Load 

Limit 

Weight 

Each 

(lbs.) 

■■Model 3075V - Steel Shells 


■■Drop-Forged Fittings and Galvanized 



Eastern Snatch Block for Manila Rope 


Cat. No. 

UPC No. 

Block 

Size 

Number 

of 

Sheaves 

Fitting Type 

Rope 

Diameter 

Sheave 

Size - 

OD 

Sheave 

Size - Rim 

Thickness 

Bearing 

Diameter 

Sheave 

Size - 

Center Pin 

Diameter 

7268796 020418115004 6 in Single Swivel Hook with Latch "V" 7/8 in 3 in 1-1/8 in 3/4 in 1/2 in 3000 lb 7.20 lb 

■■Model 4091V - Steel Shells with Steel Sheaves 

■■Drop-Forged Fittings 

■■Bronze, Self-Lubricating Bushings 

■■Painted Finish 



Cat. No. 

UPC No. 

Team Snatch Block for Wire Rope 

Number of 

Sheaves 

7329919 020418123221 Single 

Fitting Type 

Swivel Hook with 

Latch "V" 

Rope 

Diameter 

Sheave 

Size - OD 

Sheave Size - 

Rim Thickness 

Bearing 

Diameter 

Sheave Size 

- Center Pin 

Diameter 

Working 

Load 

Limit 

Working Load 

Limit (Metric Tons) 

Weight 

Each 

(lbs.) 

Weight 

Each (lbs.) 

5/8 in 6 in 1-1/4 in 1-1/4 in 1 in 7 t 30.32 lb 

1374

B L O C K S 

Extra Heavy Eastern Pattern Snatch Block 

■■Model 4102V - Steel Shells with Steel Sheaves 


■■Bronze, Self-Lubricating Bushings 


■■Features A Steel Sleeve Over A Steel Pin for Increased Strength and Durability 

■■Combination Score to Handle Variety of Sizes of Wire and Manila Rope 



Cat. No. 

UPC No. 

Block 

Size 

7336624 020418123849 6 in 

Fitting Type 

Swivel Hook 

with Latch "V" 

Manila Rope 

Diameter 

Wire Rope 

Diameter 

Sheave 

Size - OD 

Sheave 

Size - Rim 

Thickness 

Bearing 

Diameter 

Sheave Size 

- Center Pin 

Diameter 

Working Load 

Limit (Metric 

Tons) 

Weight 

Each (lbs.) 

7/8 in 3/8 in 3 in 1-1/8 in 1 in 1/2 in 2 t 10.00 lb 

Drop Side Snatch Blocks 

■■Model 4099 

■■For Wire or Manila Rope 

■■Steel Shells with Steel Sheaves 


■■3" & 4-1/2" Blocks Have Bronze Self-Lubricating Bushings; 6" Have 

Grooved Bronze Bushings with Pressure Grease Lubrication 


■■Special Feature: the Bolt Cannot Be Lost When the Block is Opened 

■■Connections Are Easily Interchangeable 



Cat. No. 

UPC No. 

Block 

Size 

Fitting Type 

Manila Rope 

Diameter 

Wire Rope 

Diameter 

Sheave Size 

- OD 

Sheave Size - Center 

Pin Diameter 


(Metric Tons) 

Weight Each 

(lbs.) 

7339750 020418124716 3 in Swivel Hook "H" - 3/8 in 3 in 3/4 in 2 t 4.35 lb 

7339752 020418124730 3 in 

Swivel Eye w/Screw Pin 

Shackle "Q" 

- 3/8 in 3 in 3/4 in 2 t 3.00 lb 

7339754 020418124754 3 in Swivel Hook with Latch "V" - 3/8 in 3 in 3/4 in 2 t 4.50 lb 

7339755 020418124761 3 in No Connection "NC" - 3/8 in 3 in 3/4 in 2 t 3.00 lb 

7339756 020418185977 3 in Drilled Swivel Eye "P" - 3/8 in 3 in 3/4 2 t 4.50 lb 

7339760 020418124778 4-1/2 in Swivel Hook "H" 1 in 1/2 in 4-1/2 in 1 in 4 t 11.00 lb 

7339762 020418124792 4-1/2 in 


Shackle "Q" 

1 in 1/2 in 4-1/2 in 1 in 4 t 12.00 lb 

7339764 020418124815 4-1/2 in Swivel Hook with Latch "V" 1 in 1/2 in 4-1/2 in 1 in 4 t 12.24 lb 

7339765 020418124822 4-1/2 in No Connection "NC" 1 in 1/2 in 4-1/2 in 1 in 4 t 6.00 lb 

7339790 020418124952 6 in Swivel Hook "H" 1-1/2 in 3/4 in 6 in 1-1/2 in 8 t 26.00 lb 

7339792 020418124976 6 in 


Shackle "Q" 

1-1/2 in 3/4 in 6 in 1-1/2 in 8 t 27.00 lb 

7339794 020418124990 6 in Swivel Hook with Latch "V" 1-1/2 in 3/4 in 6 in 1-1/2 in 8 t 26.00 lb 

18 


1375

B L O C K S 

■■Model 4213 

■■Cast Iron Sheaves 

■■Feature Bronze Self-Lubricating Bushings 

Iron Sheaves for Manila Rope 

Cat. No. UPC No. Max. Rope Diameter Outside Diameter Rim Width Pin Diameter Weight Each (lbs.) 

7344032 020418126475 3/8 in 1-3/4 in 1/2 in 3/8 in 0.26 lb 

7344132 020418126482 1/2 in 2-1/4 in 5/8 in 3/8 in 0.40 lb 

7344232 020418126505 5/8 in 3 in 3/4 in 3/8 in 0.63 lb 

7344432 020418126536 3/4 in 3-1/2 in 1 in 1/2 in 1.06 lb 

7344832 020418126581 1 in 4-3/4 in 1-1/8 in 5/8 in 2.25 lb 

Extra Heavy Iron Sheaves for Wire Rope 

■■Cast Iron Sheaves 

■■Feature Iron or Bronze Self-Lubricating (SL) Bushings 

■■Painted or Galvanized Finish 


Cat. No. 

UPC No. 

Max. Rope 

Diameter 

Outside 

Diameter 

Hub 

Diameter 

Hub Width 

Rim 

Width 

Finish 

Pin 

Diameter Bushing Type Weight Each (lbs.) 

7360122 020418127649 1/4 in 3 in 1-1/8 in 9/16 in 1/2 in Painted 3/8 in Bronze Bushed, SL 0.63 lb 




7365622 020418128370 1/2 in 4 in 2 in 1-1/16 in 1 in Painted 3/4 in Bronze Bushed, SL 2.00 lb 

7350922 020418126925 1/2 in 5 in 2-1/8 in 1-1/16 in 1 in Painted 3/4 in Iron Bushing 3.00 lb 

7360922 020418127755 1/2 in 5 in 2-1/8 in 1-1/16 in 1 in Painted 3/4 in Bronze Bushed, SL 3.00 lb 

7351022 020418126932 3/8 in 6 in 2-1/8 in 13/16 in 3/4 in Painted 5/8 in Iron Bushing 3.50 lb 



7361432 020418127854 3/8 in 6 in 2-1/4 in 1-1/16 in 1 in Painted 1 in Bronze Bushed, SL 4.75 lb 



7361224 020418127793 1/2 in 6 in 2-1/8 in 1-1/16 in 1 in Galvanized 3/4 in Bronze Bushed, SL 3.00 lb 

7361422 020418127847 1/2 in 6 in 2-1/8 in 1-1/16 in 1 in Painted 1 in Bronze Bushed, SL 3.00 lb 

7361522 020418127861 1/2 in 6 in 2-1/4 in 1-1/16 in 1 in Painted 1-1/4 in Bronze Bushed, SL 4.20 lb 



7361733 020418127892 1/2 in 8 in 2-1/8 in 1-1/16 in 1 in Galvanized 3/4 in Bronze Bushed, SL 7.00 lb 

1376

B L O C K S 

Lineman's Snatch Block, 5022 

■■Model 5022 

■■For Stringing Light Conductor Cable 

■■Hook Fits Around Insulator Pin or in the Insulator Hole 

■■Can Be Driven Into A Pole or Cross Arm 

■■Available with Bronze Self-Lubricating (SL) Bushings or Roller 

Bushed Bearings 

■■Available with or Without Hook 

Cat. No. UPC No. Fitting Type Rope Size Finish Bushing Type Weight Each (lbs.) 

7380601 020418129834 Hook 3/4 in Galvanized Roller Bushed 2.50 lb 

7380602 020418129841 Hook 3/4 in Galvanized Bronze Bushed, SL 2.50 lb 

7380603 020418129858 None 3/4 in Galvanized Bronze Bushed, SL 2.22 lb 

Hand Line Utility Block, CHB300 

■■Model CHB300 

■■For Stringing Conductor Cable or Fiber Rope Applications 

■■Side Opening Block with Zinc Plated Swivel Hook with Safety Latch 

■■Block and Sheave Molded From Rugged Reinforced Nylon Fiberglass 

High Di-Electric Material 

■■3" Sheaves - Blocks Can Accommodate Rope Through 5/8" Diameter 

■■Safe Working Load Limit is 1,000 Lbs. 


Cat. No. UPC No. Fitting Type Rope Size Finish Working Load Limit Weight Each (lbs.) 

7380300 020418225680 Hook w/Latch 5/8 in Molded Nylon, Yellow 1000 lb 1.90 lb 

18 

Try Net Block, 6150T 

■■Model 6150T 

■■Forged Steel Swivel Eye 

■■Hardened Steel Sheave for Wear Resistance 

■■Bronze Bushing with Pressure Greased Lubrication 


Cat. No. UPC No. Working Load Limit (Metric Tons) Weight Each (lbs.) 

7399058 020418130472 3 t 19.00 lb 

7399158 020418130496 5 t 22.00 lb 

■■Model 5012 

■■Public Utility Specialty Item 

■■1/2" Forged Steel 

■■Swivel Eye 


Come-Along Hook, No. 5012 


Cat. No. UPC No. Material Diameter Finish Weight Each (lbs.) 

7380101 020418129742 1/2 in Galvanized 19.00 lb 

1377

C H A I N S L I N G S 

Campbell’s Chain Sling Program Surveys, Seminars and Schools 

Users of Campbell Chain Slings may receive annual surveys to assure compliance 

with OSHA standards. These thorough in-plant inspections by qualified Apex Tool 

Group/Campbell person nel can point out potential problems, encourage proper 

handling and storage, show how to reduce inventory and increase productivity. 

Upon completion of the survey, Campbell will provide a complete report on the 

status of every Campbell chain sling and clamp for your OSHA compliance files. 

To instruct customers in the proper use of slings as well as in maintenance and 

safety procedures, Campbell will conduct seminars in your plant or at its local sling 

repair center. Further, if interested, we’ll train your plant personnel to conduct their 

own sling survey in a one and a half day “school” held at our York, Pennsylvania 

plant. Upon completion of this school, your personnel will be fully qualified to 

perform OSHA compliance inspections. 

Repairs 

Campbell’s sling repair centers across the U.S. help make the most of your company’s 

chain sling investment. Wherever economical reconditioning is possible, 

Campbell will advise you on estimated cost. A nearby center will then repair, prooftest 

and issue new certificates of test to put your slings back to work quickly. 

To Supplement Your Sling Chain Program 


Number 550201 Number 55943 

Number M7503517 

English Number 550408 

French / Spanish Number 550515 

Number 550681 

ADVERTENCIA 

Para prevenir la posibilidad de una lesión personal sería: 

• NO EXCEDA los límites de carga de las cadenas o componentes. 

• NO LA UTILICE si la cadena o los componentes están visualmente 

distorsionados o gastados. 

WARNING 




1378


Campbell Service Centers 

Chicago Area 

Alloy Sling Chain Industries, LTD 

1406 West 175th Street 

East Hazelcrest, IL 60429-1820 

Phone: (708) 647-4900 

Toll Free: (800) 255-8973 

Fax: (708) 647-4993 

Cleveland Area 

Commercial Group Lifting Products/ 

Great Lakes 

5213 Grant Avenue 

Cleveland, OH 44125 

Phone: (216) 641-4100 

Fax: (216) 641-1814 

Detroit Area 

Commercial Group Lifting Products/ 

Detroit Chain 

12801 Universal Drive 

Taylor, MI 48180 

Phone: 734-947-4000 

Fax: 734-947-4004 

Houston Area 

Bishop Lifting Products, Inc. 

125 McCarthy Drive 

Houston, TX 77029 

Phone: (800) 972-1041 

www.lifting.com 

Los Angeles Area 

John A. Batchelor Company 

2853 East 11th Street 

Los Angeles, CA 90023 

Phone: (323) 262-4125 

Fax: (323) 268-8487 

Memphis Area 

Yarbrough Cable 

950 Stage Road 

Memphis, TN 38127 

901-353-5383 

800-395-LIFT 

901-353-5267 Fax 

(Note: This Campbell partner services 

mechanical slings only) 

Philadelphia Area 

I & I Sling Company 

2626 Market St. Box 2423 

Aston, PA 19014 

Phone: (610) 485-8500 

Fax: (610) 494-5835 

Pittsburgh Area 

Safety Sling Company, Inc. 

919 Fulton Street 

Pittsburgh, PA 15233 

Phone: (412) 231-6684 

Fax: (412) 231-6695 

San Francisco Area 

Carpenter Rigging & Supply 

222 Napolean Street 

San Francisco, CA 92124 

Phone: (415) 285-1954 

Fax: (415) 285-0176 

Quebec, Canada 

St-Pierre Chains & Slings, LTD 

7690 Jarry Street E 

Anjou, Quebec 

Canada H1J 2M3 

Phone: (514) 354-4219 

Fax: (514) 354-5059 

BC, Canada 

Wesco Industries, LTD 

Unit 1, 9663-199A Street 

Langley, BC 

Canada V1M 2X7 

Phone: (604) 881-3000 

Fax: (604) 881-3010 

San Francisco, CA 

Los Angeles, CA 

Houston, TX 

Chicago, IL 

Memphis, TN 

Detroit, MI 

Dependable chain slings. 

Strong national service network 

Cleveland, OH 

Pittsburgh, PA 

Philadelphia, PA 

Our service network is composed of eleven authorized service centers in all, each strategically located across the 

United States and Canada, to offer fast, dependable service for your chain sling requirements. 

Specifically, our chain sling service program offers on-site chain inspections, including a complete report 

showing the status of all chain slings and Campbell clamps for your OSHA compliance files. All chain slings 

are fabricated precisely to Campbell’s manufacturing specifications. The program also includes in-plant 

seminars to educate your employees in proper and safe chain sling procedures. Our Campbell Chain facility in 

York, PA even conducts chain sling schools, free of charge. 

Each of our eleven authorized repair facilities has technical and sales support ready to assist you in resolving 

your overhead lifting needs. Which further proves what we have said all along: Dependable chain slings, strong 

national service network. 

18 


1379


Rated Loads For Grade 80 (System 8) Alloy Steel Chain Slings 

Rated Load for Grade 80 Alloy Steel Chain Slings 

Chain 

Size 

Nominal 

Single Leg Sling - 

90° - Horizontal 

Loading 

Rated load 

Double Leg Sling and Single Basket 

at Horizontal Angle 

Triple and Quadruple 

Leg Sling and Double Basket 


60° 45° 

30° 

60° 

45° 

30° 

Double at 60° 



Quad at 60° 

Quad at 45° 

Quad at 30° 

in. mm lb kg lb kg lb kg lb kg lb kg lb kg lb kg 

7 

⁄32 5.5 2,100 950 3,600 1,650 3,000 1,350 2,100 950 5,500 2,450 4,400 2,000 3,200 1,450 

9 

⁄32 7 3,500 1,600 6,100 2,750 4,900 2,250 3,500 1,600 9,100 4,150 7,400 3,400 5,200 2,400 

3 

⁄8 10 7,100 3,200 12,300 5,550 10,000 4,500 7,100 3,200 18,400 8,300 15,100 6,800 10,600 4,800 

1 

⁄2 13 12,000 5,400 20,800 9,450 17,000 7,700 12,000 5,400 31,200 14,150 25,500 11,550 18,000 8,200 

5 

⁄8 16 18,100 8,200 31,300 14,200 25,600 11,600 18,100 8,200 47,000 21,300 38,400 17,400 27,100 12,300 

3 

⁄4 20 28,300 12,800 49,000 22,250 40,000 18,150 28,300 12,800 73,500 33,400 60,000 27,250 42,400 19,300 

7 

⁄8 22 34,200 15,500 59,200 26,850 48,400 21,900 34,200 15,500 88,900 40,250 72,500 32,900 51,300 23,250 

1 26 47,700 21,600 82,600 37,500 67,400 30,600 47,700 21,600 123,900 56,250 101,200 45,950 71,500 32,500 

1 1 ⁄4 32 72,300 32,800 125,200 56,800 102,200 46,400 72,300 32,800 187,800 85,200 153,400 69,600 108,400 49,200 


Rated Loads for Grade 80 Alloy Steel Chain Slings - Choker Hitches 

Chain Size 

Single Leg Double Leg and Single Baskets Triple and Quadruple Leg; Double Baskets 

Nominal 

90° 60° 45° 30° 60° 45° 30° 


7 

⁄32 5.5 1,700 750 2,900 1,300 2,400 1,100 1,700 750 4,400 1,950 3,500 1,600 2,550 1,150 

9 

⁄32 7 2,800 1,300 5,000 2,200 3,900 1,800 2,800 1,300 7,300 3,300 5,900 2,700 4,150 1,900 

3 

⁄8 10 5,700 2,550 9,800 4,450 8,000 3,650 5,700 2,550 14,700 6,650 12,100 5,450 8,500 3,850 

1 

⁄2 13 9,600 4,300 16,600 7,550 13,600 6,150 9,600 4,300 25,000 11,300 20,400 9,250 14,400 6,550 

5 

⁄8 16 14,500 6,550 25,000 11,350 20,500 9,300 14,500 6,550 37,600 17,050 30,700 13,900 21,700 9,850 

3 

⁄4 20 22,600 10,250 39,200 17,800 32,000 14,500 22,600 10,250 58,800 26,700 48,000 21,800 33,900 15,450 

7 

⁄8 22 27,400 12,400 47,400 21,500 38,700 17,500 27,400 12,400 71,100 32,200 58,000 26,300 41,000 18,600 

1 26 38,200 17,300 66,100 30,000 53,900 24,500 38,200 17,300 99,100 45,000 81,000 36,750 57,200 26,000 

1-1 1 ⁄4 32 57,800 26,250 100,200 45,450 81,800 37,100 57,800 26,250 150,200 68,150 122,700 55,700 86,700 39,350 

Note: Angle of choke should be greater than 120° 

1380


Rated Loads For Grade 100 (System 10) Alloy Steel Chain Slings 

Rated Load for Grade 100 Alloy Steel Chain Slings 

Chain 

Size 

Nominal 

Single Leg Sling - 

90° - Horizontal 

Loading 

Rated load 

Double Leg Sling and Single Basket 


Triple and Quadruple 

Leg Sling and Double Basket 


60° 45° 

30° 

60° 

45° 

30° 




Quad at 60° 

Quad at 45° 

Quad at 30° 


9 

⁄32 7 4,300 1,950 7,400 3,400 6,100 2,750 4,300 1,950 11,200 5,050 9,100 4,150 6,400 2,950 

3 

⁄8 10 8,800 4,000 15,200 6,950 12,400 5,650 8,800 4,000 22,900 10,400 18,700 8,500 13,200 6,000 

1 

⁄2 13 15,000 6,800 26,000 11,800 21,200 9,600 15,000 6,800 39,000 17,650 31,800 14,450 22,500 10,200 

5 

⁄8 16 22,600 10,300 39,100 17,750 32,000 14,500 22,600 10,300 58,700 26,650 47,900 21,750 33,900 15,400 

3 

⁄4 20 35,300 16,000 61,100 27,700 49,900 22,650 35,300 16,000 91,700 41,550 74,900 33,950 53,000 24,000 

7 

⁄8 22 42,700 19,400 74,000 33,500 60,400 27,350 42,700 19,400 110,900 50,250 90,600 41,050 64,000 29,050 

Rated Loads for Grade 100 Alloy Steel Chain Slings - Choker Hitches 

Chain Size 

Single Leg Double Leg and Single Baskets Triple and Quadruple Leg; Double Baskets 

Nominal 

90° 60° 45° 30° 60° 45° 30° 


9 

⁄32 7 3,500 1,600 6,100 2,750 4,900 2,250 3,500 1,600 9,100 4,150 7,400 3,400 5,200 2,400 

18 

3 

⁄8 10 7,100 3,200 12,300 5,550 10,000 4,550 7,100 3,200 18,400 8,300 15,100 6,800 10,600 4,800 

1 

⁄2 13 12,000 5,400 20,800 9,450 17,000 7,700 12,000 5,400 31,200 14,150 25,500 11,550 18,000 8,200 

5 

⁄8 16 18,100 8,200 31,300 14,200 25,600 11,600 18,100 8,200 47,000 21,300 38,400 17,400 27,100 12,300 

3 

⁄4 20 28,300 12,800 49,000 22,250 40,000 18,150 28,300 12,800 73,500 33,400 60,000 27,250 42,400 19,300 

7 

⁄8 22 34,200 15,500 59,200 26,850 48,400 21,900 34,200 15,500 88,900 40,250 72,500 32,900 51,300 23,250 

Note: Angle of choke should be greater than 120° 


1381


Cam-Alloy Chain Slings 

Campbell manufactures a complete line of standard sling assemblies, as well as 

assemblies to customer specifications. This work is done at authorized Campbell 

Important Chain Terms 

WORKING LOAD LIMIT 

The “working load limit” (rated capacity) is the maximum combined static and 

dynamic load in pounds or kilograms which should ever be applied to the product in 

service, even when the product is new, and when the load is uniformly applied in 

direct tension to the product. 

PROOF TEST 

The “proof test” is a quality control test applied to chain for the purpose of verifying 

Sling Service Centers located in strategic areas of the country to provide maximum 

customer service. 

weld and material quality. It is the minimum force in pounds or newtons that the 

chain has withstood in direct tension as part of the manufacturing process. Proof 

testing assures that the chain is more than capable of performing at its rated working 

load limit. Proof test loads are a manufacturing integrity test and shall not be 

used as criteria for service or design purposes. All Campbell chain and components 

are proof tested in accordance with the applicable ASTM, NACM, OSHA and AISI/ 

ASME requirements. 

Certificate of Test and Identification Tags 

Campbell provides information in several forms that enables purchasers and users to 

operate safely and effectively in conformity with OSHA requirements. The drop forged 

Identification Tag is attached to the Master End Coupling link of each chain sling and 

provides the following lifetime information: 

• Grade • Working Load Limit (at a specific angle of lift) 

• Size 

• Serial number 

• Reach • Type 

A Certificate of Test is provided for every Campbell manufactured chain sling. The 

Campbell Certificate contains all of the information provided on the identification tag, 

plus the Proof Test load as required by OSHA regulations. Identification Tag Certificate of Test 


Basic Types of Chain Slings 

Slings are designated throughout the industry by the symbols. 

First Symbol (Basic type) 

S Single Chain Sling with master link and hook, or hook each end. 

C Single Choker Chain Sling with master link each end. No hooks. 

D Double Chain Sling with standard master link and hooks. 

T Triple Chain Sling with standard master link and hooks. 

Q Quadruple Chain Sling with standard master link and hooks. 

SB Single basket 

DB Double basket 

How to Order Chain Slings 

Second Symbol (Type of master link or end link) 

O Standard Oblong Master Link–Recommended for all types. 

Third Symbol (Type of Hooks) 

S Sling Hook 

G Grab Hook 

F Foundry Hook 

SL Self-locking Hook 

1. Determine the maximum load to be lifted. 

2. Refer to the following pages and choose the proper type of chain sling (single, double, 

etc.) dictated by the size, shape and weight of the load. 

3. Estimate the approximate angle between a leg of the sling and the load during operation. 

4. Select the proper attachments (hooks and master links) for your chain sling. 

5. Determine the overall reach from bearing point on master link to bearing point on attachment. 

6. Refer to the Working Load Limit Chart and to your predetermined angle of the type sling you have selected. 

7. Choose the chain size which meets your requirements. 

8. When entering your order be sure you give complete information as to the size, reach and attachments required. 

Note: Angle to the load on multiple leg slings will be 60° or greater as 

long as the distance between lifting eyes of load is not greater than reach shown on identification tag. 

1382


Inspection, Care and Proper Use of Chain Slings 

Campbell welded chain products and components are designed and built for rugged lasting 

service. As with any quality product certain precautions and standards of treatment should be 

observed. Proper care will extend the useful life of the product. 

INSTRUCTIONS REGARDING COMPONENTS & FITTINGS 

Components, such as master links and hooks, should have at least the same working load limit 

(rated capacity) as the chain with which they are used. If not, the sling shall be rated to the 

capacity of the weakest component. Campbell offers a full line of Cam-Alloy ® and Quik-Alloy ® 

sling components engineered specifically to be compatible with our alloy chain products. 

WARNINGS AND CAUTIONS 

• The use of chain, slings, and components are subject to certain hazards that cannot be 

met by mechanical or manufacturing means, but only by the exercise of intelligence, 

care, and common sense 

• Sling use is subject to the Occupational Safety & Health Administration (OSHA 29 CFR 

1910.184) and American Society for Mechanical Engineers (ASME B30.9) safety standards, 

requiring the sling user to conduct safe working practices and perform 

inspections 

• Do not exceed the working load limit of the sling or any component 

• Chemically active environments may adversely affect chain slings. Do not use in highly 

acidic or caustic environments. Campbell should be contacted if the sling will be 

exposed to chemically active environments during use 

• High and low temperatures will affect chain slings. Campbell should be contacted if 

temperatures below -20°F (-29°C) will be experienced. The attached Effect of Elevated 

Temperature on the Working Load Limit of Alloy Chain chart shows the reduction in 

strength that occurs when chain slings are used at or have been exposed to tempertures 

above 400°F (204°C) 

• Never field weld or repair a chain sling. Chain slings should only be repaired by a qualified 

repair facility 

• See other specific information under the Care, Inspection, and Proper Use sections 

INSPECTION 

OSHA and ASME safety standards require the user to conduct: 

a) Frequent Inspections: A visual inspection for damage, which should be performed 

each day the sling is used. 

b) Periodic Inspections: A complete link by link and component inspection. Periodic 

inspection intervals vary depending on sling usage and conditions, but must occur at 

least annually. Written records of periodic inspections are required. 

The slings should be inspected for the presence damage. The sling should immediately be 

removed from service if any of the following conditions are present: 

• Missing or unreadable identification tag 

• Cracks in the chain or any component 

• Excessive nicks, gouges or wear. Chain should be removed from service if the thickness 

at any point on the link is below the value shown in the attached Cam- Alloy Chain 

Minimum Allowable Thickness chart. All other components should be removed from 

service if any dimension is worn more than 10% from the original dimension 

• Stretched, bent, twisted, or distorted chain links or components 

• Excessive corrosion 

• Evidence of heat damage 

• Evidence of field welding or weld spatter 

• Any other condition which questions the integrity of the chain sling 

• Any side movement of the Quik Alloy Coupling Link Pin could indicate excessive wear 

of the pin or link half and be cause for removal from service 

• Depending on the severity of use and environment, individual Quik-Alloy components 

should be disassembled so that load pins may be thoroughly inspected 

CARE 

• Chain slings should be stored in a clean and dry area, preferably on a rack, in order to 

extend their life 

• Chain slings should not be stored in areas where they would be subject to damage, 

corrosion, chemical attack, or extreme temperatures 

• Clean slings periodically, as dust and grit can accelerate wear 

• During use, chain slings should not be dragged over abrasive surfaces. Loads should 

not be rested on the chain sling to avoid damage 

PROPER USE 

To protect the operators, the load, and the sling, the following safe practices should be followed. 

Campbell also recommends compliance with the OSHA and ASME safety 

standard practices. 

• Select a sling suitable for the load, type of hitch, angle of loading, and environment. The 

hooks and master links should be of a size to fit the intended connections 

• Avoid shock loading 

• Pad all sharp edges or corners in contact with the sling to prevent damage to either 

the sling or the load 

• Balance the load to prevent shifting, to maintain control of the load, and to prevent 

overloading of any leg in a multiple leg sling 

• Rig so that the load is properly seated in the hooks and master link. Avoid tip loading of 

hooks and side loading of master links 

• Avoid twisting or kinking of sling legs 

• Never knot chain legs 

Cam-Alloy Chain 

Minimum Allowable Thickness 

Chain Size 

Actual Size 

Stock Dia. 

Min. Allowable 

Thickness on Any 

in. mm 

Cat. No. Drum 

in. mm in. mm 

9 

⁄32 7 0405212 .282 7 .239 6.07 

3 

⁄8 10 0405412 .402 10 .342 8.69 

1 

⁄2 13 0405512 .522 13 .443 11.26 

5 

⁄8 16 0405612 .643 16 .546 13.87 

3 

⁄4 20 0405712 .802 20 .687 17.45 

7 

⁄8 22 0405812 .881 22 .750 19.05 

1 26 0401612 1.000 25 .887 22.53 

1 1 ⁄4 32 0402012 1.250 32 1.091 27.71 

Effect of Elevated Temperature on the Working Load 

Limit of Alloy Chain 

Temperature 

(F°) 

(C°) 

Grade of Chain 

Grade 80 (System8) Grade 100 (System 10) 

Reduction of 

Working 

Load Limit 

WHILE AT 

Temperature 

Reduction of 

Working Load 

Limit AFTER 

EXPOSURE to 

Temperature 

Reduction of 

Working Load 

Limit WHILE AT 

Temperature 

Reduction of 

Working Load 

Limit AFTER 

EXPOSURE to 

Temperature 

< 400° < 204° None None None None 

400° 204° 10% None 15% None 

500° 260° 15% None 25% 5% 

600° 316° 20% 5% 30% 15% 

700° 371° 30% 10% 40% 20% 

800° 427° 40% 15% 50% 25% 

900° 482° 50% 20% 60% 30% 

1000° 538° 60% 25% 70% 35% 

>1000° >538° OSHA requires that any chain sling which has experienced 

temperatures in excess of 1000° F be removed from service. 

PROPER USE (continued) 

• Horizontal angles less than 30° should not be used without consulting Campbell or a 

qualified person 

• For choker hitches, angles of choke greater than 120° should not be used without 

consulting Campbell or a qualified person. Choker hitches reduce the working load limit by 20% 

• For basket hitches, the minimum recommended diameter of the load is 6 times the nominal 

chain diameter. The attached D/d chart shows the reduction in the WLL for D/d ratios less 

than 6. 

Purchasers please note that all “Warnings and Cautions” apply to chain, components and fittings, 

as well as chain slings. Purchasers are responsible for conveying the “Warnings and 

Cautions” including the “Inspection, Care and Proper Use” section information to the end user. 

Campbell denies any liability for damage that results from use in excess of the working load limit 

or any abuse or misuse of the product. 

Any questions concerning the use of Campbell products may be directed to your Apex Tool Group 

Sales Representative or Customer Service. 

Percent of Basket Sling Rated Capacity 

D/d 

% Rated Capacity 

Less than 2 

Not Recommended 

2 60 

3 70 

4 80 

5 90 

6 and above 100 

18 


1383



How Lifting Angles Reduce Working Load Limits of Slings 

Reduction of Working Load with Varying 

Lifting Angle 

Percentages shown are of the maximum 

Working Load Limit of chain. 

Normal Working Load 

Limit of a Standard 

Sling 

Cam-Alloy Chain Specifications 

Cam-Alloy steel chain is electrically welded alloy steel embodying the latest manufacturing 

technology. Alloy provides a superior chain sling with high tensile strength 

and excellent wear resistance. The following chains meet or exceed all existing 

OSHA, ANSI, ASME, NACM and ASTM specification requirements. 

The Cam-Alloy chain and attachments used in fabricating Campbell chain slings 

offer a design factor of 4 to 1. System 8 is Campbell’s trade name for Grade 80 

chain. System 10 is Campbell’s trade name for Grade 100 chain. 


Nominal Dimensions (in. and mm) 

Trade 

Material 

Inside Dimensions 

Drum 

Working 

Size 

Diameter 

Length 

Width 

Cat. UPC No. 

Load Limit 

Feet/ Lb/ Links/ 

in. mm Grade in. mm in. mm in. mm 

No. 

020418 

lb kg 

Drum 100ft. ft. 

9 

⁄32 7 100 .29 7 .86 22 .41 10 0405212 182204 4300 1950 500 74 13.8 

5 

⁄16 8 80 .32 8 .94 24 .46 12 0400512 063367 4500 2000 500 92 12.8 

5 

⁄16 8 100 .33 8 1.01 26 .50 13 0405312 245510 5700 2600 500 104 12 

3 

⁄8 10 100 .40 10 1.22 31 .57 14 0405412 182211 8800 3990 500 148 10.0 

1 

⁄2 13 100 .52 13 1.57 40 .75 19 0405512 182228 15,000 6800 300 250 7.8 

5 

⁄8 16 100 .64 16 1.93 49 .87 22 0405612 182235 22,600 10,250 200 379 6.5 

3 

⁄4 20 100 .80 20 2.42 61 1.09 28 0405712 182242 35,300 16,000 100 610 4.9 

7 

⁄8 22 100 .88 22 2.70 69 1.28 31 0405812 063497 42,700 19,400 100 775 4.4 

1 26 80 1.00 25 2.80 71 1.40 36 0401612 063510 47,700 21,600 100 965 4.3 

1 1 ⁄4 32 80 1.25 32 3.50 89 1.75 44 0402012 063534 72,300 32,800 60 1525 3.5 

The last digit of the catalog number changes to a 1 if a non-standard quantity is ordered. 

1384


Cam-Alloy Chain Slings Single Types: S and C 

Type CO Type SOS Type SOG Type SSG Type SSS Type SOF Type SOSL 

Oblong Link 

Chain 

Nominal Size 


Working 

Size 

Material 

Width 

Length 

Load Limit 

in. mm System in. mm in. mm in. mm lb kg 

9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 4,300 1,950 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 8,800 4,000 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 15,000 6,800 

5 

⁄8 16 10 1 1 ⁄8 29 4 102 8 203 22,600 10,300 

3 

⁄4 20 10 1 1 ⁄4 32 4 102 8 203 35,300 16,000 

7 

⁄8 22 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 42,700 19,400 

1 26 8 1 7 ⁄8 48 6 152 12 305 47,700 21,600 

1 1 ⁄4 32 8 2 51 7 178 14 356 72,300 32,800 

Dimensions are approximate. Single chain slings are available in other combinations. These items are made to order. 

Cam-Alloy Chain Slings Double Type: D 

18 

Chain Size 

Type DOS Type DOG Type DOF Type DOSL 

Nominal Size 

Material 

Oblong Master Link 



45° 

Width Length Double at 60° Double at 45° Double at 30° 

in. mm System in. mm in. mm in. mm lb kg lb kg lb kg 

9 

⁄32 7 10 37 

⁄64 15 2 1 

⁄2 64 5 127 7,400 3,400 6,100 2,700 4,300 1,950 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 15,200 6,900 12,400 6,900 8,800 3,990 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 26,000 11,800 21,200 9,600 15,000 6,800 

5 

⁄8 16 10 1 1 ⁄4 32 4 102 8 203 39,100 17,700 32,000 14,500 22,600 10,300 

60° 

30° 


3 

⁄4 20 10 1 5 ⁄8 41 1 

5 ⁄4 133 1 

10 ⁄2 267 61,100 27,700 49,900 22,600 35,300 16,000 

7 

⁄8 22 10 1 7 ⁄8 48 6 152 12 305 74,000 33,500 60,400 27,350 42,700 19,400 

1 26 8 2 51 7 178 14 356 82,600 37,900 67,400 31,000 47,700 21,600 

1 1 ⁄4 32 8 2 1 ⁄4 57 8 203 16 406 125,200 56,800 102,200 46,400 72,300 32,800 

Dimensions are approximate. Double chain slings are available in other combinations. These items are made to order. 

1385


Cam-Alloy Chain Slings Triple Type: T 

Type TOS Type TOG Type TOSL 



60° 

45° 

30° 

Chain 

Size 

Nominal Size 

Material 


Width Length Triple at 60° Triple at 45° Triple at 30° 

in. mm System in. mm in. mm in. mm lb kg lb kg lb kg 

9 

⁄32 7 10 13 

⁄16 21 3 76 6 152 11,200 5,100 9,100 4,100 6,450 2,900 

3 

⁄8 10 10 1 1 ⁄8 29 4 102 8 203 22,800 10,300 18,600 8,400 13,200 6,000 

1 

⁄2 13 10 1 1 ⁄4 32 4 102 8 203 39,000 17,700 31,800 14,400 22,500 10,200 

5 

⁄8 16 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 58,700 26,600 47,900 21,700 33,900 15,400 

3 

⁄4 20 10 1 7 ⁄8 48 6 152 12 305 91,700 41,600 74,900 34,000 53,000 24,000 

7 

⁄8 22 10 2 1 ⁄4 57 8 203 16 406 110,900 50,250 90,600 41,050 64,000 29,050 

1 26 8 2 1 ⁄4 57 8 203 16 406 123,900 56,900 101,200 46,500 71,500 32,800 

1 1 ⁄4 32 8 2 3 ⁄4 70 9 229 16 406 187,800 85,200 153,400 69,600 108,400 49,200 

Dimensions are approximate. Triple chain slings are available in other combinations. These items are made to order. 


Cam-Alloy Chain Slings Quadruple Type: Q 

Chain 

Size 

Nominal 

Size 

Material 

Type QOS Type QOG Type QOSL 



Master Coupling Link 

60° 

45° 

Inside Dimensions Nominal Inside Dimensions 

Size 

Width Length Material Width Length Quad at 60° Quad at 45° Quad at 30° 

in. mm System in. mm in. mm in. mm in. mm in. mm in. mm lb kg lb kg lb kg 

9 

⁄32 7 10 13 

⁄16 21 3 76 6 152 17 

⁄32 13 1 1 ⁄2 38 2 5 ⁄8 67 11,200 5,100 9,100 4,100 6,450 2,900 

3 

⁄8 10 10 1 1 ⁄8 29 4 102 8 203 25 

⁄32 20 1 5 ⁄8 41 2 7 ⁄8 73 22,800 10,300 18,600 8,400 13,200 6,000 

1 

⁄2 13 10 1 1 ⁄4 32 4 102 8 203 1 25 3 76 5 127 39,000 17,700 31,800 14,400 22,500 10,200 

5 

⁄8 16 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 1 1 ⁄4 32 4 102 6 152 58,700 26,600 47,900 21,700 33,900 15,400 

30° 

1386 

3 

⁄4 20 10 1 7 ⁄8 48 6 152 12 305 1 1 ⁄2 38 4 102 6 152 91,700 41,600 74,900 34,000 53,000 24,000 

7 

⁄8 22 10 2 1 ⁄4 57 8 203 16 406 1 3 ⁄4 44 4 102 6 152 110,900 50,250 90,600 41,050 64,000 29,050 

1 26 8 2 1 ⁄4 57 8 203 16 406 1 7 ⁄8 48 5 127 7 178 123,900 56,900 101,200 46,500 71,500 32,800 

1 1 ⁄4 32 8 2 3 ⁄4 70 9 229 16 406 2 1 ⁄8 54 6 152 9 229 187,800 85,200 153,400 69,600 108,400 49,200 

Dimensions are approximate. Quadruple chain slings are available in other combinations. NOTE: In practice hooks on “Q” slings are in the plane opposite that shown. 

† See Oblong Master Link Sub-Assembly for complete dimensions. These items are made to order.


Miscellaneous Cam-Alloy Chain 

Slings Types Single Adjustable 

Style A 

Style B 

Standard with 1 foot of 

chain in short leg. 


Chain 

Nominal Size Inside Dimensions Working Load 

Size 

Material Width Length Limit at 90° 


9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 4,300 1,950 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 8,800 4,000 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 15,000 6,800 

5 

⁄8 16 10 1 1 ⁄8 29 4 102 8 203 22,600 10,300 

3 

⁄4 20 10 1 1 ⁄4 32 4 102 8 203 35,300 16,000 

7 

⁄8 22 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 42,700 19,400 

1 26 8 1 7 ⁄8 48 6 152 12 305 47,700 21,600 

1 1 ⁄4 32 8 2 51 7 178 14 356 72,300 32,800 

Dimensions are approximate. These items are made to order. 


Single Adjustable Loop 

Style A 

Style B 




Chain 


Size 



9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 7,400 3,400 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 15,200 6,900 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 26,000 11,800 

5 

⁄8 16 10 1 1 ⁄4 32 4 102 8 203 39,100 17,700 

3 

⁄4 20 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 61,100 27,700 

7 

⁄8 22 10 1 7 ⁄8 48 6 152 12 305 74,000 33,500 

1 26 8 2 51 7 178 14 356 82,600 37,900 

1 1 ⁄4 32 8 2 1 ⁄4 57 8 203 16 406 125,200 56,800 

For other angles of lift, refer to type “D” sling specifications. Dimensions are approximate. 

These items are made to order. 


Double Adjustable 

Style A 


Double Adjustable Loop 

Style A 

Style B 



Style B 




Chain 


Size 



9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 7,400 3,400 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 15,200 6,900 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 26,000 11,800 

5 

⁄8 16 10 1 1 ⁄4 32 4 102 8 203 39,100 17,700 

3 

⁄4 20 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 61,100 27,700 

7 

⁄8 22 10 1 7 ⁄8 48 6 152 12 305 74,000 33,500 

1 26 8 2 51 7 178 14 356 82,600 37,900 




Chain 


Size 



9 

⁄32 7 10 13 

⁄16 21 3 76 6 152 11,200 5,100 

3 

⁄8 10 10 1 1 ⁄8 29 4 102 8 203 22,800 10,300 

1 

⁄2 13 10 1 1 ⁄4 32 4 102 8 203 39,000 17,700 

5 

⁄8 16 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 58,700 26,600 

3 

⁄4 20 10 1 7 ⁄8 48 6 152 12 305 91,700 41,600 

7 

⁄8 22 10 2 1 ⁄4 57 8 203 16 406 110,900 50,250 

1 26 8 2 1 ⁄4 57 8 203 16 406 123,900 56,900 



18 


1387


Cam-Alloy Chain Sling 

Single and Double Basket 


Chain 


Size 



9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 7,400 3,400 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 15,200 6,900 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 26,000 11,800 

5 

⁄8 16 10 1 1 ⁄4 32 4 102 8 203 39,100 17,700 

3 

⁄4 20 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 61,100 27,700 

7 

⁄8 22 10 1 7 ⁄8 48 6 152 12 305 74,000 33,500 

Single Basket 

Double Basket 

1 26 8 2 51 7 178 14 356 82,600 37,900 

1 1 ⁄4 32 8 2 1 ⁄4 57 8 203 16 406 125,200 56,800 


Chain 


Size 



9 

⁄32 7 10 13 

⁄16 21 3 76 6 152 11,200 5,100 

3 

⁄8 10 10 1 1 ⁄8 29 4 102 8 203 22,800 10,300 

1 

⁄2 13 10 1 1 ⁄4 32 4 102 8 203 39,000 17,700 

5 

⁄8 16 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 58,700 26,600 

3 

⁄4 19 10 1 7 ⁄8 48 6 152 12 305 91,700 41,600 

7 

⁄8 22 10 2 1 ⁄4 57 8 203 16 406 110,900 50,250 

1 26 8 2 1 ⁄4 57 8 203 16 406 123,900 56,900 

For other angles of lift, refer to Type “D” for single basket slings and Type “Q” for double basket slings. 



Cam-Alloy Chain Slings Single 

and Double Endless Basket 

Single Endless Basket 

Double Endless Basket 


Chain 


Size 



9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 4,300 1,950 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 8,800 3,990 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 15,000 6,800 

5 

⁄8 16 10 1 1 ⁄8 29 4 102 8 203 22,600 10,250 

3 

⁄4 20 10 1 1 ⁄4 32 4 102 8 203 35,300 16,000 

7 

⁄8 22 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 42,700 19,400 

1 26 8 1 7 ⁄8 48 6 152 12 305 47,700 21,600 

1 1 ⁄4 32 8 2 51 7 178 14 356 72,300 32,800 


Chain 


Size 



9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 7,400 3,400 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 15,200 6,900 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 26,000 11,800 

5 

⁄8 16 10 1 1 ⁄4 32 4 102 8 203 39,100 17,700 

3 

⁄4 20 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 61,100 27,700 

7 

⁄8 22 10 1 7 ⁄8 48 6 152 12 305 74,000 33,500 

1 26 8 2 51 7 178 14 356 82,600 37,900 

1 1 ⁄4 32 8 2 1 ⁄4 57 8 203 16 406 125,200 56,800 

For other angles of lift, refer to Type “D” for single basket slings and Type “Q” for double basket slings. 


1388


Cam-Alloy Chain Slings Double with Links Only 


Standard Oblong Link 

Chain 

Nominal Inside Dimensions Nominal Inside Dimensions Working Load 

Size 

Size 

Size 


Material Width Length 

in. mm System in. mm in. mm in. mm in. mm in. mm in. mm lb kg 

9 

⁄32 7 10 37 

⁄64 15 2 1 ⁄2 64 5 127 37 

⁄64 15 2 1 ⁄2 64 5 127 7,400 3,400 

3 

⁄8 10 10 13 

⁄16 21 3 76 6 152 13 

⁄16 21 3 76 6 152 15,200 6,900 

1 

⁄2 13 10 1 1 ⁄8 29 4 102 8 203 1 1 ⁄8 29 4 102 8 203 26,000 11,800 

5 

⁄8 16 10 1 1 ⁄4 32 4 102 8 203 1 1 ⁄8 29 4 102 8 203 39,100 17,700 

3 

⁄4 20 10 1 5 ⁄8 41 5 1 ⁄4 133 10 1 ⁄2 267 1 1 ⁄4 32 4 102 8 203 61,100 27,700 

7 

⁄8 22 10 1 7 

⁄8 48 6 152 12 305 1 1 ⁄2 38 5 1 ⁄4 133 10 1 ⁄2 267 74,000 33,500 

Type DOO 

1 26 8 2 51 7 178 14 356 1 3 ⁄4 44 6 152 12 305 82,600 37,900 

1 1 ⁄4 32 8 2 1 ⁄4 57 8 203 16 406 2 51 7 178 14 356 125,200 56,800 

Dimensions and weights are approximate. For other angles of lift, refer to Type “D” slings. These items are made to order. 

Cam-Alloy Chain Shortener 

Chain Size Working Load Limit 

in. mm System Reach lb kg 

9 

⁄32 7 10 1’1” 4,300 1,950 

3 

⁄8 10 10 1’3” 8,800 4,000 

1 

⁄2 13 10 1’8” 15,000 6,800 

5 

⁄8 16 10 2’0” 22,600 10,300 

3 

⁄4 20 10 2’4” 35,300 16,000 

7 

⁄8 22 10 2’8” 42,700 19,400 

1 26 8 3’1” 47,700 21,600 

1 1 ⁄4 32 8 3’10” 72,300 32,800 



Attachment, One End Only 

How Off-Center (Tip) Loading 

Reduces Working Load Limits 

of 1/2" - Cam-Alloy Sling Hooks 

Chain Size 


in. mm System lb kg 

9 

⁄32 7 10 4,300 1,950 

3 

⁄8 10 10 8,800 4,000 

1 

⁄2 13 10 15,000 6,800 

5 

⁄8 16 10 22,600 10,300 

3 

⁄4 20 10 35,300 16,000 

7 

⁄8 22 10 42,700 19,400 

1 26 8 47,700 21,600 

1 1 ⁄4 32 8 72,300 32,800 


True 1/4 in. 1/2 in. 3/4 in. Tip 

Loading Off Center Off Center Off Center Loading 

18 


15,000 

lbs. 

13,200 

lbs. 

11,850 

lbs. 

10,600 

lbs. 

6150 

lbs. 

100% 88% 79% 71% 41% 

of Rating of Rating of Rating of Rating of Rating 

1389


Cam-Alloy Sling Hooks 

■■For Use with Grade 80/100 Chain Slings 


■■Meet or Exceed All Requirements of ASME B30.9 and B30.10 

■■100% Proof Tested in Accordance with ASTM A952 

■■Additionally Hallmarked with "USA" and Date Code 



Chain 


Hook 

No. 

Grade 

Working Load 

Limit 

Weight Each 

(lbs.) 

9/32 in 5646415 020418222320 C-80 100 4300 lb 1.30 lb 

3/8 in 5646615 020418221583 C-81 100 8800 lb 2.10 lb 

1/2 in 5646815 020418222856 C-82 100 15000 lb 5.42 lb 

5/8 in 5647015 020418225109 C-83 100 22600 lb 10.00 lb 

3/4 in 5647215 020418225093 C-84 100 35300 lb 15.10 lb 

7/8 in 5645415 020418152962 C-85 100 42700 lb 21.00 lb 

1 in 5641615 020418078859 C-86 80 47700 lb 21.98 lb 

Chain Size Cat. No. D Dim. Ed Dim. Es Dim. H Dim. OAL OAW R Dim. T Dim. W Dim. 

9/32 in 5646415 1.14 in 0.75 in 0.44 in 1.50 in 5.56 in 3.59 in 4.50 in 1.25 in 0.75 in 


1/2 in 5646815 2 in 1.13 in 0.804 in 2.25 in 8.37 in 5.65 in 5.70 in 1.88 in 1.42 in 




1 in 5641615 3.50 in 1.94 in 1.38 in 4.25 in 14.56 in 9.59 in 10.18 in 3.25 in 2.38 in 


Cam-Alloy Sling Hooks 

With Latches 






■■Integrated Latch Engages Tip of Hook 



Chain 


Hook 

No. 

Grade 

Working 

Load Limit 

Weight Each 

(lbs.) 

9/32 in 5646495 020418222313 C-90 100 4300 lb 1.24 lb 

3/8 in 5646695 020418 221590 C-91 100 8800 lb 2.20 lb 

1/2 in 5646895 020418222870 C-92 100 15000 lb 5.57 lb 

Chain Size Cat. No. D Dim. Ed Dim. Es Dim. H Dim. OAL OAW R Dim. T Dim. W Dim. 




1390


Cam-Alloy and Quik-Alloy Latches (Old Style) 

■■Replacement Latches for Older Cam-Alloy® and Quik-Alloy® Sling Hooks 

■■Clapper Latch Design Fits Older Style Non-Integrated Tip Sling Hooks 

Chain Size Cat. No. UPC No. 

Cam-Alloy 

Sling Hook 

Cam-Alloy 

Sling Hook 

with Latch 

Quik-Alloy 

Sling Hook 

Quik-Alloy 

Sling Hook 

with Latch 

9/32 in 3990401 020418072758 5644415 5644495 5744415 5744495 

3/8 in 3990601 020418072772 5644615 5644695 5744615 5744695 

1/2 in 3990701 020418072789 5644815 5644895 5744815 5744895 

5/8 in & 

3/4 in 

3991001 020418072819 

7/8 in & 1 in 3991409 020418177163 

5645015 & 

5645215 

5645415 & 

5641615 

5645095 & 

5645295 

5645495 & 

5641695 

5745015 & 

5745215 

5745095 & 

5745295 

- - 

Sling Hook Replacement Latches (New Style) 

■■Replacement Latches for Cam-Alloy & Quik-Alloy Sling Hooks 

■■New Latch Design Fits Newer Integrated Tip Sling Hooks 

Trade 


Cam-Alloy 

Sling 

Hook 

Cam-Alloy 

Sling Hook 

with Latch 

Quik-Alloy 

Sling 

Hook 

Quik-Alloy 

Sling Hook 

with Latch 

Latch 

Marking 

Weight Each 

(lbs.) 

9/32 in 7506495 020418223853 5646415 5646495 5746415 5746495 CC-4 0.08 lb 

3/8 in 7506695 020418223846 5646615 5646695 5746615 5746695 CC-5 0.08 lb 

1/2 in 7506895 020418225161 5646815 5646895 5746815 5746895 CC-7 0.14 lb 

5/8 in 7507095 020418225178 5647015 - 5747015 5747095 CC-8 0.18 lb 

3/4 in 7507295 020418225154 5647215 - 5747215 5747295 CC-9 0.52 lb 

18 

Cam-Alloy Foundry Hooks 








Chain 


Hook 

No. 

Grade 

Working 

Load Limit 

Weight Each 

(lbs.) 

9/32 in 5664415 020418182457 C-498 100 4300 lb 2.20 lb 

3/8 in 5664615 020418182464 C-499 100 8800 lb 3.90 lb 

1/2 in 5664815 020418182471 C-500 100 15000 lb 6.70 lb 

5/8 in 5665015 020418182488 C-501 100 22600 lb 10.50 lb 

3/4 in 5665215 020418182495 C-502 100 35300 lb 15.60 lb 

7/8 in 5665415 020418152948 C-503 100 42700 lb 24.00 lb 

1 in 5661615 020418078965 C-504 80 47700 lb 34.10 lb 

1-1/4 in 5662015 020418078972 C-505 80 72300 lb 52.50 lb 


1391


Cam-Alloy Foundry Hooks (continued) 

Chain Size Cat. No. D Dim. Ed Dim. Es Dim. H Dim. R Dim. T Dim. W Dim. 

9/32 in 5664415 1.3 in 0.62 in 0.47 in 1.56 in 4.75 in 2.50 in 1.00 in 0.25 in 



Spherical 

Radius 




1 in 5661615 3.25 in 2.09 in 1.25 in 3.75 in 11.56 in 5.50 in 2.50 in 0.62 in 

1-1/4 in 5662015 3.88 in 2.47 in 1.37 in 4.25 in 12.87 in 6.00 in 3.00 in 0.75 in 

Cam-Alloy Grab Hooks 







■■Note: Use of Chain in a Grab Hook May Reduce the Breaking 

Load of the Chain by up to 20% 



Chain 


Hook 

No. 

Grade 

Working 

Load Limit 

Weight Each 

(lbs.) 

9/32 in 5624415 020418182303 C-72 100 4300 lb 0.60 lb 

3/8 in 5624615 020418182310 C-73 100 8800 lb 0.90 lb 

1/2 in 5624815 020418182327 C-75 100 15000 lb 2.80 lb 

5/8 in 5625015 020418182334 C-76 100 22600 lb 3.70 lb 

3/4 in 5625215 020418182341 C-77 100 35300 lb 7.50 lb 

7/8 in 5625415 020418152979 C-78 100 42700 lb 11.20 lb 

1 in 5621615 020418078651 C-79 80 47700 lb 18.50 lb 

Chain Size Cat. No. D Dim. Ed Dim. Es Dim. OAL OAW R Dim. T Dim. W Dim. 







1 in 5621615 3.00 in 1.87 in 1.12 in 12.14 in 6.75 in 7.98 in 1.19 in 1.81 in 

1392


Self-locking Eye Hooks 


■■Fatigue and 100% Proof Tested in Accordance with ASTM A952 


■■Meets the Intent of OSHA Regulation 1926.550(g)(4)(iv)(b) 

■■Latch Closes Automatically Under Load 

■■Eye Style is Designed to Accommodate Heavy Duty Wire Rope 

Thimbles 

■■Stamped with Recommended Wire Rope Size 

■■Working Load Limit Rating of 5 to 1 to Meet Design 

Requirements of Wire Rope Slings 

Working 

Working 


Chain 

Load Limit For Wire Load Limit Weight 


4 to 1 Rope Size 5 to 1 Each (lbs.) 


9/32 in 5648495 020418193262 4300 lb 7/16 in 3800 lb 2.25 lb 

3/8 in 5648695 020418193279 8800 lb 1/2 in 7000 lb 4.00 lb 

1/2 in 5648895 020418193286 15000 lb 5/8 in 12000 lb 8.65 lb 

5/8 in 5649095 020418193293 22600 lb 7/8 in 18000 lb 13.80 lb 

Chain Size Cat. No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. H Dim. J Dim. R Dim. 

9/32 in 5648495 1.875 in 1.00 in 0.938 in 1.02 in 3.594 in 1.625 in 0.438 in 0.875 in 1.25 in 5.468 in 




Self-locking Hook Repair Kits 

■■Trigger Repair Kit for Clevis, Eye and Swivel Self Locking Hooks 

■■Repair Kit Contents: 

■■Pivot Pin 

■■Drive Pins (2) 

■■Trigger 

■■Trigger Spring 

■■Spring Alignment Insert (9/32 & 3/8 Kits Only) 

Hook Size Cat. No. UPC No. Weight Each (lbs.) 

9/32 in 5788495 020418207518 0.10 lb 

3/8 in 5788695 020418207525 0.20 lb 

1/2 in 5788895 020418210600 1.00 lb 

5/8 in 5789095 020418211874 0.55 lb 

18 


1393


Self-locking Swivel Hooks 




■■Meets the Intent of OSHA Regulation 1926.550(g)(4)(iv)(b) 


■■Working Load Limit Rating of 5 to 1 to Meet Design 

Requirements of Wire Rope Slings 



■■HOOK IS NOT DESIGNED TO SWIVEL UNDER LOAD 

Chain 


Working 

Load Limit 

4 to 1 

For Wire 

Rope Size 

Working 

Load Limit 

5 to 1 

Weight 

Each (lbs.) 

9/32 in 5798495 020418226830 4300 lb 7/16 in 3800 lb 3.35 lb 

3/8 in 5798695 020418226847 8800 lb 1/2 in 7000 lb 5.80 lb 

1/2 in 5798895 020418226878 15000 lb 5/8 in 12000 lb 12.95 lb 

5/8 in 5799095 020418226861 22600 lb 7/8 in 18000 lb 21.00 lb 







Cam-Alloy Oblong Master Links 

■■For Use with Grade 80/100 Chain Slings, Wire Rope and Synthetic 

Assemblies 


■■Meet or Exceed All Requirements of ASME B30.26 


■■Hallmarked with "USA", Date Code, Link No. and Material Diameter 



Link 


Mat. Dia. 

(A) 

Inside Width 

(B) 

Inside 

Length (C) 

Working 

Load Limit 

5 to 1 

Used with Single 

Type S & C 

Used with Double 

Type D 

Used with 

Triple or Quad 

Type T or Q 

Weight Each 

(lbs.) 

CO-0 5685615 020418079214 13/32 in 1.50 in 3.00 in 4200 lb 7/32 in 7/32 in - 0.50 lb 

CO-1 5683215 020418182549 5/8 in 2.50 in 5.00 in 8600 lb 9/32 in 9/32 in 7/32 in 1.10 lb 

CO-2 5683315 020418182556 13/16 in 3.00 in 6.00 in 17600 lb 3/8 in 3/8 in 9/32 in 2.63 lb 

CO-3 5683415 020418182563 1-1/8 in 4.00 in 8.00 in 30000 lb 1/2 in or 5/8 in 1/2 in 3/8 in 8.00 lb 

CO-4 5683515 020418182570 1-1/4 in 4.00 in 8.00 in 45200 lb 3/4 in 5/8 in 1/2 in 9.20 lb 

CO-5 5683615 020418182587 1-5/8 in 5.25 in 10.50 in 70600 lb 7/8 in 3/4 in 5/8 in 18.90 lb 

CO-6 5683715 020418182594 1-7/8 in 6.00 in 12.00 in 105900 lb 1 in 7/8 in 3/4 in 28.71 lb 

CO-7 5687015 020418079351 2 in 7.00 in 14.00 in 102600 lb 1-1/4 in or 1-1/2 in 1 in - 37.30 lb 

CO-8 5687215 020418079375 2-1/4 in 8.00 in 16.00 in 144600 lb - 1-1/4 in or 1-1/2 in 7/8 in or 1 in 54.00 lb 

1394


Cam-Alloy Wide Master Oblong Links 

■■Wider Than Standard Master Links 

■■Usable with Quik-Alloy® Coupling Links for Double Leg Slings 

■■Wider Link Accommodates Heavy Wire Rope Thimbles in Multiple Leg Slings 

■■Grade 100 Chain Strength 




■■Hallmarked with "USA", Date Code, Link No. and Material Diameter 



Link No. Cat. No. UPC No. Mat. Dia. (A) Inside Width (B) Inside Length (C) 


5 to 1 Weight Each (lbs.) 

CW-2 5683315VW 020418239496 7/8 in 4.00 in 6.50 in 17600 lb 3.50 lb 

CW-3 5683415VW 020418239502 1-1/8 in 4.25 in 7.50 in 30000 lb 6.55 lb 



Cam-Alloy Oblong, Master Link Sub-Assemblies 

■■For Construction of Triple, Quad and Double Basket Slings 




■■Master Link Hallmarked with "USA", Date Code, Link No. and Material Diameter 



18 

Chain Size 

Cat. No. 


Material Dia. (A) 


Inside Width (B) 



5 to 1 Weight Each (lbs.) 

9/32 in 5682215 020418182501 12900 lb 4.40 lb 

3/8 in 5682315 020418182846 26400 lb 9.50 lb 

1/2 in 5682415 020418182518 45000 lb 16.00 lb 

5/8 in 5682515 020418182525 67800 lb 31.75 lb 

3/4 in 5682615 020418182532 105900 lb 50.00 lb 

7/8 in 5682715 020418167409 128100 lb 85.00 lb 


Inside Length (C) 

Master Coupling 

Link Material Dia. 

(D) 


Link Inside Width 

(E) 


Link Inside Length 

(F) 

9/32 in 5682215 13/16 in 3 in 6 in 17/32 in 1-1/2 in 2-3/4 in 

3/8 in 5682315 1-1/8 in 4 in 8 in 25/32 in 1-9/16 in 2-7/8 in 

1/2 in 5682415 1-1/4 in 4 in 8 in 1 in 3 in 5 in 

5/8 in 5682515 1-5/8 in 5-1/4 in 10-1/2 in 1-1/4 in 4 in 6 in 

3/4 in 5682615 1-7/8 in 6 in 12 in 1-1/2 in 4 in 6 in 

7/8 in 5682715 2-1/4 in 8 in 16 in 1-3/4 in 4 in 6 in 


1395


Quik-Alloy Chain Slings 

The Campbell Quik-Alloy system provides proof tested and certified components 

for easily and quickly assembling all of the popular types of chain slings plus many 

special slings. 

Hooks and coupling links have rotating load pins that resist bending and offer 

shear values equivalent to the chain. The open design of the hooks allows for easy 

inspection. All Quik-Alloy components are sized and identified according to the 

chain with which they are to be used. They meet or exceed all OSHA, ANSI, and 

ASME specifications. 

How to Design Quik-Alloy Chain Slings 

1. Determine the maximum LOAD to be lifted. 

2. Choose the TYPE of sling assembly necessitated by the size and dimension of 

the load. 

3. Estimate the approximate ANGLE to the load in which the legs of the assembly 

will be positioned for operation. 

4. Determine the SIZE OF CHAIN ATTACHMENTS by referring to the Assembly 

Tables that follow. On multi-leg slings, if the distance between the points of 

attachment equals the reach of the sling, the angle is approximately 60° 

5. Determine the overall REACH (see illustration). Use the Assembly Tables that 

follow to determine length of Cam-Alloy chain to order. 

6. Attach field identification tag to all slings. One box of 50- No. 7503506. 

For any problem involving reach, angle of lift or working load limit, consult your 

local Campbell distributor. Remember to use only Campbell “Quik-Alloy” components 

in assembling chain slings. 

SUBSTITUTION OF ANY COMPONENTS WITH PARTS NOT INDICATED ON THE CHART 

COULD SERIOUSLY DIMINISH THE WORKING LOAD OF THE ASSEMBLY. Do not use 

any coupling links to repair damaged or broken chain. It is imperative that such 

chain be replaced. 

How to Assemble Quik-Alloy Coupling Links 


1. Loop one half of body over the master link at the 

flat embossed area, the other half through the 

chain. Fit together. 

2. Place stud assembly and alloy locking pin in link 

as shown. 

3. Drive the locking pin in until the snap ring engages 

the recessed portion of the pin. (Link is 

disassembled by simply driving locking pin out.) 

1396


How to Use Quik-Alloy Chain Sling Assembly Tables 

If the overall reach of your sling is determined to be more than five feet, subtract 

five feet, then add this difference to the “chain needed” length given on the 

Assembly Table. If overall reach is less than five feet, subtract reach from five feet. 

Then subtract the difference from the “chain needed” length in the Assembly Table. 

All measurements are based on using Quik-Alloy hooks (not Cam-Alloy hooks). 

WHEN USING QUIK-ALLOY HOOKS (NOT CAM-ALLOY HOOKS), BE SURE THAT 

EACH LEG OF A DOUBLE SLING HAS THE SAME, EVEN (DIVISIBLE BY TWO) 

NUMBER OF LINKS. For triple or quad slings, each leg should have odd numbers of 

links to compensate for coupling links on master link sub-assembly. When cutting, 

if the required reach falls within a link, LEAVE THAT LINK. Reach measurements are 

given as a minimum. Never cut less than specified reach. 

Quik-Alloy Chain Sling Assembly Tables 

in. mm in. mm in. mm in. mm in. mm 

Chain Size 9 

⁄32 7 3 

⁄8 10 1 

⁄2 13 5 

⁄8 16 3 

⁄4 19 

Single Chain Slings: Types S and C 

Cat.No. 

Chain needed 

for 5’ reach 

lb kg lb kg lb kg lb kg lb kg 

Working Load Limit 4,300 1,952 8,800 3,995 15,000 6,810 22,600 10,260 35,300 16,026 

Master Link Number CO-1 CO-2 CO-3 CO-3 CO-4 

Master Link 5683215 5683315 5683415 5683515 5683615 

QA Sling Hook 5746415 5746615 5746815 5747015 5747015 

QA Grab Hook 5724415 5724615 5724815 5725015 5725215 

QA Coupling Link 5779125 5779135 5779145 5779155 5779165 

Sling Hook 4’1” 3’10” 3’7” 3’5” 3’3” 

Grab Hook 4’3” 4’0” 3’9” 3’8” 3’6” 

Double Chain Slings: Type D 


60° 7,500 3,405 15,200 6,901 26,000 77,804 39,100 17,751 61,100 27,739 

Working Load Limit 45° 6,100 2,769 12,400 5,630 21,200 9,625 32,000 14,528 49,900 22,655 

30° 4,300 1,952 8,800 3,995 15,000 6,810 22,600 10,260 35,300 16,026 


Master Link 5683215 5683315 5683415 5683515 5683615 

Cat.No. 

QA Sling Hook 5746415 5746615 5746815 5747015 5747015 

QA Grab Hook 5724415 5724615 5724815 5725015 5725215 


Chain needed Sling Hook 4’1” 3’10” 3’7” 3’5” 3’1” 

for 5’ reach Grab Hook 4’3” 4’0” 3’9” 3’8” 3’3” 

Triple Chain Slings: Type T and 

Quad Chain Slings: Type Q 


60° 11,200 5,085 22,800 10,351 39,000 17,706 58,700 26,650 91,700 41,632 

Working Load Limit 45° 9,100 4,131 18,600 8,444 31,800 14,437 47,900 21,747 74,900 34,005 

30° 6,450 2,928 13,200 5,993 22,500 10,215 33,900 15,391 53,000 24,062 


Sub-Assembly 5682215 5682315 5682415 5682515 5682615 

Cat.No. 

QA Sling Hook 5746415 5746615 5746815 5747015 5747015 

QA Grab Hook 5724415 5724615 5724815 5725015 5725215 


Chain needed Sling Hook 3’10” 3’6” 32” 2’10” 2’5” 

for 5’ reach Grab Hook 3’11” 3’8” 3’4” 2’10” 2’8” 

18 


1397


Quik-Alloy Coupling Links 

■■For Connecting Chain to Components in the Fabrication of Chain Slings 





■■3/4" Through 1-1/4" Coupling Links Utilize A Barrel Style Oversized Retainer 


■■Per ASME B30.9, Section 9.1.3 “Mechanical Coupling Links Shall Not Be Used 

Within the Body of An Alloy Chain Sling to Connect Two Pieces of Chain” 


Chain Size Cat. No. UPC No. Grade 

Material 

Diameter 

Working 

Load Limit 

Weight 

Each (lbs.) 

7/32 in 5770315 020418079993 80 1/2 in 2100 lb 0.10 lb 

9/32 in 5779125 020418182754 100 37/64 in 4300 lb 0.26 lb 

3/8 in 5779135 020418182761 100 13/16 in 8800 lb 0.69 lb 

1/2 in 5779145 020418182860 100 1-3/16 in 15000 lb 1.56 lb 

5/8 in 5779155 020418182778 100 1-5/16 in 22600 lb 2.51 lb 

3/4 in 5779165 020418182785 100 1-11/16 in 35300 lb 4.05 lb 

7/8 in 5779175 020418152931 100 1-7/8 in 42700 lb 8.00 lb 

1 in 5771615 020418080067 80 2-1/8 in 47700 lb 9.50 lb 

1-1/4 in 5772015 020418080074 80 2-11/32 in 72300 lb 16.62 lb 


Chain Size Cat. No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. 

7/32 in 5770315 17/64 in 7/32 in 15/16 in 7/16 in 5/32 in 1-17/32 in 3/8 in 

9/32 in 5779125 3/8 in 11/32 in 23/32 in 9/16 in 13/64 in 2-13/64 in 3/8 in 

3/8 in 5779135 1/2 in 7/16 in 2-3/8 in 13/16 in 5/16 in 2-7/16 in 23/64 in 

1/2 in 5779145 11/16 in 9/16 in 3 in 1-1/32 in 25/64 in 3-3/8 in 29/64 in 

5/8 in 5779155 13/16 in 23/32 in 3-7/8 in 1-9/32 in 15/32 in 3-29/32 in 35/64 in 

3/4 in 5779165 15/16 in 61/64 in 4-5/8 in 1-9/16 in 9/16 in 4-3/4 in - 

7/8 in 5779175 1-3/16 in 1-1/16 in 5-3/8 in 1-13/16 in 41/64 in 5-5/16 in - 

1 in 5771615 1-15/64 in 1-9/64 in 5-7/8 in 2-1/32 in 11/16 in 5-7/8 in - 

1-1/4 in 5772015 1-1/2 in 1-3/8 in 7-3/8 in 2-9/32 in 15/16 in 6-15/16 in - 

Quik-Alloy Coupling Link Pins and Retainers 

■■Replacement Pins and Retainers for Quik-Alloy Coupling Links 

Chain Size Cat. No. UPC No. Grade Weight Each (lbs.) Shelf Pack Qty. 

9/32 in 5784425 020418182792 100 0.02 lb 10 

3/8 in 5784435 020418182808 100 0.06 lb 10 

1/2 in 5784445 020418182815 100 0.11 lb 10 

5/8 in 5784455 020418182822 100 0.17 lb 5 

3/4 in 5784465 020418182839 100 0.35 lb 5 

7/8 in 5784165 020418181740 100 0.58 lb 1 

1398


Quik-Alloy Sling Hooks, Regular 








Chain Size Cat. No. A Dim. D Dim. E Dim. 

Chain 

Size Cat. No. UPC No. Grade 

Working 

Load Limit 

Weight Each 

(lbs.) 

9/32 in 5746415 020418222344 100 4300 lb 1.50 lb 

3/8 in 5746615 020418221606 100 8800 lb 3.10 lb 

1/2 in 5746815 020418222863 100 15000 lb 6.45 lb 

5/8 in 5747015 020418225123 100 22600 lb 10.20 lb 

3/4 in 5747215 020418225147 100 35300 lb 17.60 lb 

Load Pin 

Dia. HP OAW R Dim. T Dim. U Dim. W Dim. 

9/32 in 5746415 5/16 in 1-1/8 in 11/32 in 3/8 in 1.78 in 3-7/8 in 3-3/4 in 1-1/4 in 1-1/16 in 3/4 in 

3/8 in 5746615 7/16 in 1-7/16 in 1/2 in 1/2 in 2-3/8 in 4-1/2 in 4-3/4 in 1-5/16 in 1-5/16 in 1 in 

1/2 in 5746815 9/16 in 2 in 5/8 in 5/8 in 3 in 6 in 5-3/4 in 1-7/8 in 1-1/2 in 1-3/8 in 

5/8 in 5747015 23/32 in 2-3/8 in 3/4 in 3/4 in 3 in 6-9/16 in 7 in 2-3/8 in 1-3/4 in 1-1/2 in 

3/4 in 5747215 13/16 in 2-7/8 in 7/8 in 15/16 in 3-3/8 in 7-3/4 in 7-3/4 in 2-1/2 in 2-3/16 in 1-3/4 in 

Quik-Alloy Sling Hooks, Latched 








Chain Size Cat. No. A Dim. D Dim. E Dim. 

Chain 


Working Load 

Limit 

Weight Each 

(lbs.) 

9/32 in 5746415 020418222344 100 4300 lb 1.50 lb 

3/8 in 5746615 020418221606 100 8800 lb 3.10 lb 

1/2 in 5746815 020418222863 100 15000 lb 6.45 lb 

5/8 in 5747015 020418225123 100 22600 lb 10.20 lb 

3/4 in 5747215 020418225147 100 35300 lb 17.60 lb 

Load Pin 

Dia. HP OAW R Dim. T Dim. U Dim. W Dim. 

9/32 in 5746495 5/16 in 1-1/8 in 11/32 in 3/8 in 1.78 in 3-7/8 in 3-3/4 in 1-1/4 in 1-1/16 in 3/4 in 

3/8 in 5746695 7/16 in 1-7/16 in 1/2 in 1/2 in 2-3/8 in 4-1/2 in 4-3/4 in 1-5/16 in 1-5/16 in 1 in 

1/2 in 5746895 9/16 in 2 in 5/8 in 5/8 in 3 in 6 in 5-3/4 in 1-7/8 in 1-1/2 in 1-3/8 in 

5/8 in 5747095 23/32 in 2-3/8 in 3/4 in 3/4 in 3 in 6-9/16 in 7 in 2-3/8 in 1-3/4 in 1-1/2 in 

3/4 in 5747295 13/16 in 2-7/8 in 7/8 in 15/16 in 3-3/8 in 7-3/4 in 7-3/4 in 2-1/2 in 2-3/16 in 1-3/4 in 

18 


1399


Cam-Alloy and Quik-Alloy Latches (Old Style) 

■■Replacement Latches for Older Cam-Alloy® and Quik-Alloy® Sling Hooks 

■■Clapper Latch Design Fits Older Style Non-Integrated Tip Sling Hooks 


Cam-Alloy 

Sling Hook 

Cam-Alloy 

Sling Hook 

with Latch 

Quik-Alloy 

Sling Hook 

Quik-Alloy 

Sling Hook 

with Latch 

9/32 in 3990401 020418072758 5644415 5644495 5744415 5744495 

3/8 in 3990601 020418072772 5644615 5644695 5744615 5744695 

1/2 in 3990701 020418072789 5644815 5644895 5744815 5744895 

5/8 in & 3/4 in 3991001 020418072819 

7/8 in & 1 in 3991409 020418177163 

5645015 & 

5645215 

5645415 & 

5641615 

5645095 & 

5645295 

5645495 & 

5641695 

5745015 & 

5745215 

5745095 & 

5745295 

- - 

Sling Hook Replacement Latches (New Style) 

■■Replacement Latches for Cam-Alloy & Quik-Alloy Sling Hooks 

■■New Latch Design Fits Newer Integrated Tip Sling Hooks 

Trade 


Cam-Alloy 

Sling Hook 

Cam-Alloy 

Sling Hook 

with Latch 

Quik-Alloy 

Sling 

Hook 

Quik-Alloy 

Sling Hook 

with Latch 

Latch 

Marking 

Weight 

Each (lbs.) 

9/32 in 7506495 020418223853 5646415 5646495 5746415 5746495 CC-4 0.08 lb 

3/8 in 7506695 020418223846 5646615 5646695 5746615 5746695 CC-5 0.08 lb 

1/2 in 7506895 020418225161 5646815 5646895 5746815 5746895 CC-7 0.14 lb 

5/8 in 7507095 020418225178 5647015 - 5747015 5747095 CC-8 0.18 lb 

3/4 in 7507295 020418225154 5647215 - 5747215 5747295 CC-9 0.52 lb 


Quik-Alloy Grab Hooks 








Chain 


Working 

Load Limit 

Weight Each 

(lbs.) 

9/32 in 5724415 020418182600 100 4300 lb 0.60 lb 

3/8 in 5724615 020418182617 100 8800 lb 1.60 lb 

1/2 in 5724815 020418182624 100 15000 lb 3.50 lb 

5/8 in 5725015 020418182631 100 22600 lb 5.40 lb 

3/4 in 5725215 020418182648 100 35300 lb 12.40 lb 

Chain Size Cat. No. A Dim. D Dim. E Dim. Load Pin Dia. HP OAW R Dim. T Dim. W Dim. 

9/32 in 5724415 5/16 in 13/16 in 11/32 in 3/8 in 1-1/4 in 2 in 2-11/32 in 3/8 in 5/8 in 

3/8 in 5724615 7/16 in 1-1/4 in 1/2 in 1/2 in 1-5/8 in 2-13/16 in 2-29/32 in 1/2 in 3/4 in 

1/2 in 5724815 9/16 in 1-1/2 in 5/8 in 5/8 in 2 in 3-1/2 in 3-23/32 in 21/32 in 15/16 in 

5/8 in 5725015 23/32 in 1-3/4 in 3/4 in 3/4 in 2-5/8 in 4-1/8 in 4-7/16 in 25/32 in 1-7/32 in 

3/4 in 5725215 13/16 in 2-1/8 in 7/8 in 7/8 in 3-1/4 in 4-7/8 in 5-1/8 in 31/32 in 1-3/8 in 

1400


Self-locking Clevis Hooks 

■■Meets the Intent of Osha Regulation 1926.550(g)(4)(iv)(b) 





■■Trigger Assembly is Completely Replaceable 



Chain 


Working 

Load Limit 

Weight Each 

(lbs.) 

9/32 in 5748495 020418193309 100 4300 lb 2.35 lb 

3/8 in 5748695 020418193316 100 8800 lb 4.10 lb 

1/2 in 5748895 020418193323 100 15000 lb 8.75 lb 

5/8 in 5749095 020418193330 100 22600 lb 13.30 lb 






Self-locking Hook Repair Kits 

■■Trigger Repair Kit for Clevis, Eye and Swivel Self Locking Hooks 

■■Repair Kit Contents: 

■■Pivot Pin 

■■Drive Pins (2) 

■■Trigger 

■■Trigger Spring 

■■Spring Alignment Insert (9/32 & 3/8 Kits Only) 

Hook Size Cat. No. UPC No. Weight Each (lbs.) 

9/32 in 5788495 020418207518 0.10 lb 

3/8 in 5788695 020418207525 0.20 lb 

1/2 in 5788895 020418210600 1.00 lb 

5/8 in 5789095 020418211874 0.55 lb 

18 


1401


Cam-Alloy "J" Hooks 

■■Forged Alloy Steel 

■■Proof Tested to 2 Times the Working Load Limit 

■■Self Colored Finish 



Cat. No. UPC No. Style Material Diameter Working Load Limit Weight Each (lbs.) 

5616215 020418078484 A 3/4 in 2250 lb 0.85 lb 

5616615 020418078491 B 1 in 3600 lb 2.37 lb 

5616616 020418189777 A 1 in 3600 lb 2.38 lb 

Cam-Alloy "S" Hooks 

■■Made of Heat-Treated Alloy Steel 

■■Proof Tested to 2 Times the Working Load Limit 

■■Meet Proof Test and Design Factor for Use in Alloy Chain Slings 

■■Working Load Limit is Embossed on the S-Hook Body 

■■Finish is Self Colored 




Trade Size Cat. No. UPC No. A Dim. B Dim. C Dim. R Dim. 

Field I.D. Tags 

■■Designed for Field Attachment 

■■Pre-Stamped for Easy Addition of Reach, Working Load Limit, Chain Size, 

Chain Grade and Serial Number 

■■Tag Measures 1 1/2" X 4 1/8" X 5/32" Thick and Has A 1 1/16" Diameter Hole 

■■Cut at Top of Tag Allows You to Attach to Sling Link 

■■Also Available Solid (Without Split) 

■■Box of 50 Tags (Order Unit is "Carton") 

Working Load 

Limit 

Cat. No. UPC No. Type Quantity Per Package Weight Per Carton (Lbs) 

7503506 020418135309 Split 50 12.80 lb 

7503506C 020418217319 Solid 50 12.80 lb 

Weight Each 

(lbs.) 

9/32 in 5610405 020418078262 2.75 in 0.75 in 0.38 in 0.38 in 250 lb 0.07 lb 





1 in 5611605 020418078323 11.00 in 3.00 in 1.50 in 1.50 in 3200 lb 4.45 lb 

1402

L I F T I N G C L A M P S 

Campbell Lifting Clamps 

Campbell clamps are known and used throughout the world for lifting, conveying 

and positioning of sheet, plate, weldments and structurals. The heavier the load, 

the tighter they grip. Parts are drop forged for strength, dependability and long life, 

and all clamps are individually proof tested. Replacement parts are available when 

needed. If you have any doubts as to the clamp best suited to your application, 

contact your Apex Tool Group salesman. 

NOTICE: The product specifications and dimensions are as accurate as 

possible at the time of printing. However, because we are constantly 

improving the quality and design of our products, they can change 

without notice. 

All Working Load Limits are expressed in Metric Tons. 

1 Metric Ton = 2,204.6 lbs. 

Inspection, Maintenance & Repair 

It is important to establish a regular procedure for clamp inspection. Frequency 

of inspection will depend upon the amount of use the clamp receives. Campbell 

clamps are built to withstand rough treatment, however, grit, dirt, sludge and mud 

should be removed. This may be done easily by immersing the entire clamp in 

a can of degreaser and leaving it there overnight. Also, periodic oiling of all pins 

WARNING 

1. Do not exceed Working Load Limit stamped on Clamp body. 

2. Inspect clamp before each lift. 

3. Stand clear of load when lifting. 

4. Position clamp to balance load. 

5. Insert plate or unit to full depth of throat opening. 

6. Lift slowly and smoothly. Do not jerk load. 

7. Do not lift more than one plate or sheet at a time. 

8. Do not use a damaged clamp. 

9. Read manufacturer’s instructions before using clamps. 

10. Do not use any Campbell clamp to lift tapered plates or beams. 

11. When lifting plates with a hardness over 43 Rockwell C/400 BRINELL, use 

non-marring clamps only. 

12. Campbell clamps are designed to be used at temperatures between 0°F 

and 200°F. 

and rivets will improve performance and help to extend the life of the clamp. You 

may wish to maintain a written record, indicating inspection dates, condition of the 

clamp on each of those dates, and any repairs made. Inspection records should be 

reviewed periodically. 

Inspection Procedure 

1. Cams—These are the parts likely to receive most wear. The amount of wear, 

of course, bears a direct relationship to the use the cam receives. Continued usage 

of plates of the same thickness will result in wear in only one area of the working 

surface of the cam, and will eventually require that the cam be replaced. The harder 

the plate is, the sooner the cam will be worn. A simple visual inspection of the cam is 

all that is required in most cases. The surfaces of the cam should be compared with 

unused surfaces. If any one tooth is worn or chipped more than 50% along the length 

of its crown, the cam should be replaced. 

Note: The Pad and Cam should be replaced at the same time. 

2. Pads—The pads of “GX” and “E” clamps are held in with a bolt and can be 

replaced simply by removing the bolt. If any one tooth is worn or chipped more than 

50% along the length of its crown, the pad should be replaced. 

Note: The Pad and Cam should be replaced at the same time. 

3. Spread Jaw—Check the throat width of the clamp. At zero grip, the cam should 

be in full contact with the pad. If the width at the base (where the pad is located) 

is greater than the width at the top, the clamp has been overloaded and should be 

replaced. 

Warning: Do not weld on the clamp body, as this may destroy the original heat treatment. 

4. Linkage and Shackle Inspection—To remove the linkage from a “GX” clamp, 

remove the load pins from the body. The pins do not rotate, and under normal load 

do not require replacement. They should be inspected for bending, which is caused 

by overloads, and replaced as needed. Inspect the shackle for bending at the rivet, 

which is an indication of side pull. If this is a recurrent fault, use a chain connector on 

the clamp. 

5. Rivet Inspection—Rivets may require replacement when a very loose connection 

is detected. Linkage should normally be free working. Should a rivet hole in the 

shackle, radius link or connecting link become stretched or enlarged (usually resulting 

from overloading), those parts should be replaced. It is advisable to replace the rivet 

as well. To replace any worn parts, drive rivets out over a relief opening, such as a 

small section of pipe or the opening in a vise. 

Warning: Do not weld or substitute bolts for rivets. Check connecting links to ascertain 

that they are not bent. 

6. Spring inspection—The spring should be of sufficient strength to hold the cam 

against the pad. If it is not, the spring should be replaced. In the case of the “E” 

clamp, the spring should be replaced if it fails to provide initial pressure at near zero 

grip. 

7. Chains—Chains supplied with clamps should also be inspected carefully. To do 

this, use a Campbell wear gauge. Inspect chains link by link, checking for distorted, 

stretched or cracked links, nicks or gouges, pitted links and excessive wear of bearing 

surfaces and barrels. 

ADVERTENCIA 

• Las mordazas en este catálogo no fueron diseñadas para ser utilizadas como conexión permanente de una placa o de otros objetos. 

• El agarre depende de la fricción y de la presión entre ambas piezas. Si no se les da mantenimiento adecuado a las superficies de agarre y se utiliza la 

mordaza de manera inadecuada se puede caer la carga. 

• Tenga mucha precaución cuando se va a elevar carga por encima de objetos o donde una falla puede ocasionar daños a la propiedad o lesiones personales. 

• Lea los instructivos de uso y de mantenimiento. 

18 


WARNING 

• The clamps in this catalog are not intended to serve as a permanent connection to a plate or other object. 

• The grip depends on friction and a camming action. If the gripping surfaces are not properly maintained and the clamp is improperly used, the load may fall. 

• Use extreme caution where overhead lifting is involved or where a failure could cause property damage or personal injury. 

• Read maintenance materials and use instructions. 

1403


GXL Clamps 

■■Available in a 1/2, 1, and 2 Metric Ton Capacities 

■■Can Be Used for Both Vertical and Horizontal to Vertical Lifting Through 180° 

■■Drop Forged and Heat Treated Components, with Gripping Surfaces of Case 

Hardened Alloy Steel. 

■■Exclusive Feature is a Patented Wear Indicator System. When Any of the 

Cam's Straight Line, Convex Teeth Are Flattened Between Unique Wear 

Indicator Grooves, It is Time to Change the Cam. 

■■Note: The Pad and Cam Should Be Replaced at the Same Time 

■■Newly Designed "Cam Engaging Locking Lever" Keeps the Cam in Contact 

with the Plate. the Tension Arm and Spring Mechanism Facilitate Attaching 

and Removing the Clamp. These Clamps Will Not Lift Plate When in the 

"Lever Open" Position 

■■Clamps Are 100% Proof Tested and Certificate of Test Supplied with Each 

Clamp 

■■Minimum WLL of at Least 10% of the Maximum WLL 

■■Warning: NEVER Tamper with a Clamps Tension Arm or Spring Mechanism 

During a Lift. 

Cat. No. UPC No. Grip Range 

Working Load 

Limit (Metric Tons) Weight Each (lbs.) 

6422012 020418187049 1/16 to 5/8 in. 1/2 t 5.50 lb 

6422001 020418185687 1/16 to 3/4 in. 1 t 8.00 lb 

6422002 020418187032 1/16 to 7/8 in. 2 t 10.50 lb 

Cat. No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. H Dim. I Dim. 

6422012 5-15/16 in 10 in 2-1/8 in 2-5/8 in 2 in 4 in 3-1/4 in 1-3/16 in 5-3/16 in 

6422001 6-9/16 in 11-1/4 in 3-13/16 in 3-1/16 in 2-1/16 in 5 in 3-5/8 in 1-5/8 in 5-7/8 in 

6422002 7-1/4 in 12-1/8 in 2-9/16 in 3-5/16 in 2-1/4 in 4-7/8 in 3-1/2 in 1-5/8 in 5-15/16 in 


Repair Kits for "GXL" Clamps 

■■Replacement Part Kits for All "GXL" Style Clamps 

■■Kits Contain All Necessary Parts for Shackle or Cam/Pad 

Replacement 

■■Shackle Kit Includes: 1 Shackle, 1 Radius Link, 1 T-Spring, 2 

Connecting Links, 1 Radius Link Pin, 1 Pivot, 1 Lever, 1 E-Spring, 

2 Sel-Locs, 3 Linkage Rivets, 1 Drive Pin 

■■Note: Shackle Kit is Supplied Pre-Assembled for Easier 

Installation 

■■Cam/Pad Kit Includes: 1 Cam, 1 Pad, 1 Cam Pin, 1 Pad Pin, 1 

T-Spring, 1 E-Spring, 1 Rivet, 4 Sel-Locs 

For Use 

Cat. No. UPC No. Part Name 

With Clamp 

Capacity 

Weight Each 

(lbs.) 

6506200 020418210204 Shackle Kit 1/2 TON 3.00 lb 

6506201 020418210211 Cam/Pad Kit 1/2 TON 0.50 lb 

6506210 020418210228 Shackle Kit 1 TON 3.00 lb 

6506211 020418210235 Cam/Pad Kit 1 TON 1.00 lb 



6506200 Shackle Kit 

Components 

6506201 Cam/Pad Kit 

Components 

1404


GX Clamps 

■■Features Drop-Forged and Heat Treated Body and Components 


■■Exclusive Feature is a Patented Wear Indicator System. When Any of the Cam's 

Straight Line, Convex Teeth Are Flattened Between Unique Wear Indicator 

Grooves, It is Time to Change the Cam. 


■■Clamps Are 100% Proof Tested and Certificate of Test Supplied with Each Clamp 




(Metric Tons) Weight Each (lbs.) 

6423000 020418172199 1/16 to 5/8 in. 1/2 t 4.00 lb 

6423920 020418175657 5/8 to 1-1/8 in. 1/2 t 5.00 lb 

6423005 020418172205 1/16 to 3/4 in. 1 t 8.00 lb 

6423923 020418175664 3/4 to 1-3/8 in. 1 t 9.00 lb 

6423010 020418172229 1/16 to 1 in. 3 t 17.00 lb 

6423925 020418175671 1 to 1-3/4 in. 3 t 20.00 lb 

6423015 020418177583 1/2 to 2 in. 5 t 40.00 lb 


6423000 4 in 9-1/2 in 2-3/16 in 2-3/4 in 2 in 4-1/8 in 2-7/8 in 1-3/8 in 4-7/8 in 




6423010 6 in 14 in 3-9/16 in 3-13/16 in 3 in 6-3/4 in 4-7/16 in 2 in 7-5/8 in 

6423925 7-1/4 in 14 in 3-9/16 in 3-13/16 in 3 in 6-3/4 in 4-7/16 in 2-1/4 in 7-5/8 in 

6423015 8-7/8 in 20 in 4-11/16 in 5 in 3-15/16 in 8-3/4 in 5-15/16 in 3-13/16 in 9-15/16 in 

18 

Short Leg Structural "GX" Clamps 

■■Designed for a Secure Bite on Small or Odd Shaped, Wide Flanged Beams 


■■Put Short Leg Under Plate When Lifting From Horizontal to Vertical 

■■Replacement Parts Are Same As for Standard "GX" Clamps 






(Metric Tons) Weight Each (lbs.) 

6423100 020418177330 1/16 to 5/8 in. 1/2 t 4.25 lb 

6423105 020418177347 1/16 to 3/4 in. 1 t 8.00 lb 

6423108 020418183041 1/16 to 7/8 in. 2 t 10.00 lb 

6423110 020418177354 1/16 to 1 in. 3 t 18.00 lb 




6423108 5-1/8 in 12-1/8 in 2-5/8 in 3-5/16 in 2-1/4 in 5 in 3-9/16 in 1-5/8 in 5-15/16 in 

6423110 6 in 15-1/16 in 3-7/16 in 3-13/16 in 3 in 6-9/16 in 4-3/16 in 2 in 7-5/16 in 


1405


Repair Kits for "GX" Clamps 

■■Replacement Part Kits for All "GX" Style Clamps 


Replacement 


Connecting Links, 1 Radius Link Pin, 3 Linkage Rivets, 4 Sel-Locs 

■■Note: Shackle Kit is Supplied Pre-Assembled for Easier Installation 

■■Cam/Pad Kit Includes: 1 Cam, 1 Pad, 1 Cam Pin, 1 Pad Pin, 1 

T-Spring, 1 Rivet, 4 Sel-Locs 


For Use 

With Clamp 

Capacity 

Weight Each 

(lbs.) 












Components 


Components 


Chain Connector Clamps 

■ ■"GX" Style Chain Connector Clamp 

■■Clamp Comes Fitted with Chain Connector in Place of the Clamp Shackle 

■■Use of This Clamp Increases the Flexibility of Multiple Leg Chain Slings 

■■Clamp is Made of Drop Forged and Heat Treated Alloy Steel 


Cat. No. UPC No. Style Grip Range 

Working Load 

Limit (Metric 

Tons) 

Weight 

Each (lbs.) 

6423900 020418175947 Regular "GX" 1/16 to 5/16 in. 1/2 t 4.50 lb 

6423905 020418175954 Regular "GX" 1/16 to 3/4 in. 1 t 9.00 lb 

6423805 020418177378 

Short Leg 

Structural "GX" 

1/16 to 3/4 in. 1 t 10.00 lb 

GX Rubber Pad (Non-Marring) Clamps 

■■Has A Rubber Covered Pad 

■■Cam of Relatively Smooth Metal Conditioned to Grip Tightly 

■■Should Be Used for Lifting Smooth Polished Plates and/or Hard Plates Over 43 

Rockwell C/400 Brinnell 

■■Lifts Heavy Plates with Minimum Marring 





(Metric Tons) 


6423600 020418175916 1/16 to 3/8 in. 1/2 t 6.00 lb 

6423605 020418175923 1/16 to 5/8 in. 1 t 22.00 lb 

1406


Repair Kits for "GX" Rubber Pad Clamps 

■■Replacement Part Kits for All "GX Rubber Pad" Style Clamps 


Replacement 


Connecting Links, 1 Radius Link Pin, 3 Linkage Rivets, 2 Sel-Locs 

■■Note: Shackle Kit is Supplied Pre-Assembled for Easier Installation 

■■Cam/Pad Kit Includes: 1 Cam, 1 Rubber Pad, 1 Cam Pin, 1 Pad 

Pin, 1 T-Spring, 1 Rivet, 4 Sel-Locs, 3 Screws 


For Use With 

Clamp Capacity 

Weight Each 

(lbs.) 






Components 


Components 

Sharp Leg "GX" Style Clamps 

■■Designed to Lift Stacked Plates From Horizontal to Vertical Positions in A 90° Arc 

(Not 180°) 

■■Long Sharp Leg Can Be Driven Between Top Two Plates to Fully Engage the Clamp 



■■Replacement Parts Are Same As for Standard "GX" Clamps 



(Metric Tons) 


6423500 020418175534 1/16 to 5/8 in. 1/2 t 5.00 lb 

6423505 020418175541 1/16 to 3/4 in. 1 t 9.00 lb 

6423510 020418175558 1/16 to 1 in. 3 t 26.00 lb 

18 

Locking "E" Clamps 

■■Clamp Lifts From Either Horizontal or Vertical Position 

■■Clamps Turn Plates Through 90° 

■■Locks Open or Closed with a Lever 

■■Has Large Throat That Gives a Secure Bite and Wide Grip Range 



■■Note: Be Sure Clamp is in Lock Closed Position Before Making Lift 

■■Warning: NEVER Tamper with a Clamps Tension Arm or Spring Mechanism 

During a Lift. 

Cat. No. UPC No. Model No. Grip Range 

Working Load 

Limit (Metric Tons) 

Weight Each 

(lbs.) 

6420701 020418096112 3E 0 to 1-1/4 in. 3 t 20.00 lb 

6420702 020418096129 5E 0 to 1-1/2 in. 5 t 28.00 lb 

6420703 020418096136 5E 1-1/4 to 2-1/2 in. 5 t 33.00 lb 

6420705 020418096150 8E 1/2 to 2-1/2 in. 8 t 81.00 lb 


1407


Repair Kits for Locking "E" Clamps 

■■Replacement Part Kits for All "E" Style Clamps 

■■Kits Contain All Necessary Parts for Shackle or Cam/Pad Replacement 

■■Shackle Kit Includes: 1 Shackle, 1 Shackle Bolt, 1 Nut, 1 Cotter Pin 

■■Cam/Pad Kit w/ Tension Arm Includes: 1 Cam, 1 Pad, 1 Cam Bolt, 1 

Pad Bolt, 2 Nuts, 2 Rivets, 1 Drive Pin, 1 Spring, 1 Chain Pull, 1 Chain 

Pull Clip, 1 Tension Arm, 2 Swivel Pins, 2 Cotter Pins 

■■Cam/Pad Kit Includes: 1 Cam, 1 Pad, 1 Cam Bolt, 1 Pad Bolt, 2 Nuts, 1 

Rivet, 2 Cotter Pins 


For Use With 

Clamp Capacity Grip Range 

Weight 

Each (lbs.) 

6507030 020418210440 Shackle Kit 3 TON All Grips 3.50 lb 

6507031 020418210457 

Cam/Pad/ 

Tension Arm Kit 

3 TON All Grips 5.00 lb 

6507032 020418227684 Cam/Pad Kit 3 TON All Grips 2.50 lb 

6507050 020418210464 Shackle Kit 5 TON All Grips 3.70 lb 

6507051 020418210471 

Cam/Pad/ 


5 TON All Grips 5.60 lb 

6507052 020418227691 Cam/Pad Kit 5 TON All Grips 4.50 lb 

6507080 020418210488 Shackle Kit 8 TON 1/2 - 2 1/2 in 8.10 lb 

6507081 020418210495 

Cam/Pad/ 


8 TON & 12 TON All Grips 16.50 lb 

6507082 020418210426 Shackle Kit 8 TON & 12 TON 

8 TON - 2 - 4 in 

12 TON - All Grips 

8.10 lb 

6507083 020418227677 Cam/Pad Kit 8 TON & 12 TON All Grips 15.30 lb 

6507030 Shackle 

Kit Components 

6507031 Cam/Pad 



SAC (Screw-Adjusted Cam) Plate Clamps 

■■Recommended for Turning Plates From Horizontal to Vertical As 

Well As Through A 180° Arc 

■■The Convex, Serrated Cam Swivels on A Ball Joint So That the 

Area of Cam Engagement Increases As Load Increases 

■■Drop Forged Body and Shackle 

■■Clamps Are 100% Proof Tested and Certificate of Test Supplied 

with Each Clamp 


■■Note: Screw Needs to Be Hand Tight Only! Do Not Overtighten. 


Working Load 

Limit (Metric 

Tons) 

Weight 

Each (lbs.) 

6421000 020418096396 SAC-1 0 to 1 in. 1 t 6.25 lb 

6421001 020418096402 SAC-3 0 to 2 in. 3 t 17.00 lb 

6421002 020418096419 SAC-6 0 to 3 in. 6 t 39.00 lb 

Cat. No. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. H Dim. J Dim. O Dim. P Dim. 

6421000 5-1/4 in 7-3/4 in 4 in 1-3/4 in 2-7/8 in 1/2 in 1-1/2 in 2-1/4 in 6-1/4 in 1-23/64 in 

6421001 7-3/4 in 10-1/2 in 6-1/2 in 1-7/8 in 3-3/8 in 3/4 in 2-3/8 in 3-3/4 in 9-1/4 in 1-13/16 in 

6421002 10 in 14-1/4 in 8-1/4 in 3-1/4 in 4-1/2 in 1-1/8 in 3 in 4-1/2 in 12 in 2-1/4 in 

1408


Repair Kits for SAC Clamps 

■■Replacement Part Kits for All "SAC" Style Clamps 

■■Kits Contain All Necessary Parts for Shackle, Screw and Handle or 

Cam/Pad Replacement 

■■Cam/Pad Kit Includes: 1 Cam, 1 Pad, 1 Pad Bolt, 1 Nut, 1 Washer 

■■Screw w/Handle Kit Includes: 1 Screw, 1 Handle 

■■Shackle w/Bolt Kit Includes: 1 Shackle, 1 Bolt, 1 Nut, 1 Cotter Key 


For Use With 


Weight 

Each (lbs.) 

6501000 020418210112 Cam/Pad Kit SAC - 1 0.40 lb 

6501101 020418211942 Screw w/Handle Kit SAC - 1 1.65 lb 

6501111 020418211959 Shackle w/Bolt Kit SAC - 1 1.00 lb 







6501000 Cam/Pad 


Duplex Hand Grip Clamps 

■■Designed to Carry or Pull Any Object That Will Fit Into Its Jaws 

■■Grips and Releases Automatically 

18 

Cat. No. UPC No. Grip Range Handle Length C Dim. J Dim. O Dim. Weight Each (lbs.) 

6421801 020418096693 0 to 5/16 in. 2 in 6 in 1-7/8 in 3-3/4 in 1.15 lb 

6421802 020418096709 0 to 5/16 in. Eye Nut 8 in 1-7/8 in 3-3/4 in 2.10 lb 




Horizontal Plate Clamp 

■■One Person Can Handle Plates with This Clamp 

■■Dual Springs Hold Cam on the Work While the Second Clamp is Placed 

■■Sold in Pairs Only 

■■Clamps Are 100% Proof Tested and Certificate of Test Supplied with 

Each Clamp 



Working 

Load Limit 

(Metric Tons) Cam Width A Dim. B Dim. C Dim. D Dim. O Dim. 

Weight Per 

Pair (lbs ) 

6421701 020418096686 6H 0 to 1-1/2 in. 6 t 3/4 in 4-1/2 in 1 in 8 in 1 in 7-1/2 in 28.00 lb 

1409


Repair Parts for Horizontal Plate Clamp 

■■Replacement Kit for Horizontal Plate Clamps 

■■Cam Kit Includes: 1 Cam, 1 Cam Bolt, 2 Springs, 2 Nuts 

Cat. No. UPC No. Part Name For Use With Clamp Capacity Weight Each (lbs.) 

6501700 020418210433 Cam Kit Model 6H Horizontal Plate 5.00 lb 

Single Drum Lifter, No. 52 

■■Lifts Steel Drums With or Without Heads Removed 

■■Drums Can Be Lifted From Either Horizontal or Vertical Positions 

and Then Reversed 

■■Snaps Onto Drum and is Held There By Its Spring-Loaded Cam 

Even When There is No Load 

■■Note: This Clamp is Not Suitable for Lifting Plates or Sheets 

Cat. No. UPC No. Model No. 


(Metric Tons) 

Overall Width 

Bearing to Pad 

Center I.D. Of Eye Bead Recess 

Max. Jaw 

Opening 

Weight Each 

(lbs.) 

6410101 020418095634 52 1/2 t 5 in 6 in 1-3/4 in 1/2 in x 3/4 in 7/8 in 4.75 lb 


Repair Kit for Drum Lifter, No. 52 

■■Replacement Parts for All "No. 52 & No. 252" Drum Lifter Clamps 

■■Kits Contain All Necessary Parts for Cam/Pad Replacement 

■■Cam/Pad Kit Includes: 1 Cam, 1 Pad, 2 Cam Pins, 1 Pad Bolt, 1 

Spring, 1 Nut, 2 Cotter Keys 

Cat. No. UPC No. Model No. Part Name 

6505011 020418099823 

No. 52 and 

No. 252 

Cam, Pad, Rivet 

and Spring 

For Use With 


Drum Lifter 

Weight 

Each (lbs.) 

0.23 lb 

Chain Sling for Drums, No. 13 

■■Double Sling Assembly Consisting of 9/32 " Alloy Chain, Two No. 

52 Drum Lifter Clamps and CO-1 Master Link 

■■Chain Legs Connected By Quik-Alloy ® Coupling Links 

■■Working Load Limit Rated at 60° 

Cat. No. UPC No. Model No. 


(Metric Tons) Overall Length Alloy Chain Size Clamp Used Weight Each (lbs.) 

6410301 020418095665 13 1 t 27 in 9/32 in 6410101 13.00 lb 

1410


Twin Drum Lifter, No. 252 

■■Handles Both Regular and Resealable Drums Without Damaging Bead 

■■A Recess on Short Leg of Clamps Accommodates the Bead of 

Resealable Drums 

■■See No. 52 Drum Lifter for Replacement Parts 



(Metric Tons) Overall Length Weight Each (lbs.) 

6410401 020418095672 252 17-1/2 to 25 in. 1 t 28 in 22.75 lb 

Drum Deheader, No. 138 

■■All Parts Are Drop Forged and Heat Treated 

■■Cuts the Heads Out of Steel Drums Without Leaving Dangerous Edges 

■■Blade and Fulcrum Are Detachable 

■■For Initial Cut, Tool Has Point in Rear and Striking Surface in Front 

■■Available with Either Alloy Blade or Non-Sparking Blade 

■■Drum Deheader Operating Instructions: 

■■1) Open Handles, Place Blade on Top of Steel Drum So That Pivot is on Outside, 

Below Lip of Drum, Close Handles. 

■■2) Pry Down So Point of Blade Pierces Lid. If Needed, While Prying Down, Strike 

Back of Blade with Hammer. 

■■3) Lift Handle Slightly, Slide Deheader Forward, Pry Downwards to Cut Lid Further. 

Cat. No. UPC No. Model No. Part Name Length Weight Each (lbs.) 

6410701 020418095719 138 Deheader with Alloy Balde 24 in 5.50 lb 

6410702 020418095726 139 Deheader with Non-Sparking Blade 24 in 5.50 lb 

18 

Repair Parts for Drum Deheader, No. 138 

■■Replacement Blade for No. 138 and No. 139 Drum Deheaders 

Cat. No. UPC No. Part Name Weight Each (lbs.) 

6500140 020418098123 Alloy Blade 0.50 lb 

6500141 020418098130 Non-Sparking Blade 0.50 lb 


1411



1412

A L P H A I N D E X 

Numeral 

11 Series 

Reel for Peerless Chrome Clad® Tapes............ 1064 

120XP Ratchets 

1/4" Drive........................................................... 144 

3/8" Drive........................................................... 220 

1/2" Drive............................................................317 

31 Series 

Reel for Over 100' Lengths............................... 1064 

700 Series, Tape Measures 

Power Return Tapes......................................... 1045 

Power Return Tapes 

Magnetic End Hook...................................... 1045 

800 Series, Tape Measures 


81 and 91 Series 

Reels for Chrome Clad® and Gauging Tapes.... 1064 

A 

A/C and Fuel Line Spring Lock Coupling Tool....1168 

Accessories 

Files......................................................... 1032-1033 

Files 

Ergonomic................................................... 1033 

No. 26.......................................................... 1032 

Plastic.................................................1033-1034 

Wooden........................................................ 1034 

Adapters 

Hand 

1/4" Drive..........................................147,160,182 

3/8" Drive............................................... 224,278 

1/2" Drive............................................... 319,366 

3/4" Drive...................................................... 399 

1" Drive...........................................................410 

Impact 

1/4" Drive...................................................... 432 

3/8" Drive...............................................448,459 

1/2" Drive............................................... 474,489 

3/4" Drive...............................................500,506 

1" Drive...........................................................514 

1-1/2" Drive................................................... 520 

Locking 

1/4" Drive.......................................................182 

Adjustable Wrenches......................769-775,777-782 

Adjustable Wrenches 

Automobile......................................................... 768 

Black Oxide............................757,772-775,779,782 

Chrome Plated.............................. 769-770,777-778 

Chrome Plated 

Set................................................................. 778 

Cushion Grip................................................771-772 

RapidSlide............................................... 775,780 

Replacement...................................................... 776 

Air Hold and Compression Check Kit.................1165 

Air Hold Extension Hose......................................1166 

Air Hold Fitting Set...............................................1166 

ALLEN® Hex Wrenches / Keys 

Fold-up Sets................................................527-534 

Handi-Hex...............................................573-574 

L Keys......................................................... 534-558 

T-Handles....................................................558-573 

Anchor® 

Long Blades...................................................... 1049 

Angled Hose Clamp Pliers............................879,1163 

Angle Finder........................................................ 1076 

Angle Wrenches.............................. 736-739,744-745 

Animal Accessories, Chain.................................1318 

Artisan® 

Long Blades.......................................................1051 

AS954, Aerospace Sockets 

1/4" Drive.....................................................186,190 

3/8" Drive.................................................... 282,288 

1/2" Drive........................................................... 376 

Atlas® 

Oil Gauging Tapes............................................. 1058 

Oil Gauging Tapes 

Nubian® 

Double Duty............................................. 1057 

Autograf 

Curved Claw..................................................... 1089 

Ripping Claw.................................................... 1089 

Automatic Transmission Clutch-Spring Compressor........................................................................ 

1236 

Auto Transmission Line Disconnect...................1170 

Aviation Snips............................................... 932-933 

Aviation Snips 

All-Purpose Cutter.............................................. 935 

Bulldog............................................................... 933 

Long Cut............................................................. 936 

Multipurpose Snips............................................. 935 

Offset................................................................. 934 

Pipe & Duct Cutting............................................ 935 

Repair Springs.................................................... 934 

Special Series..................................................... 933 

Vertical....................................................... 934-935 

Awl........................................................................1197 

Axle Nut Socket....................................................1219 

Axle Nut Socket 

Set............................................................ 1156,1219 

B 

Ball Joint 

Separator......................................................... 1233 

Separator Universal.......................................... 1234 

Ball Pein Hammer 

Fiberglass Handled........................................... 1084 

Hickory Handled............................................... 1084 

Banner 

Long Blades...................................................... 1050 

Battery 

Brush.................................................................1189 

Carrying Strap..........................................1189-1190 

Nut Pliers.............................................878,887,1188 

Terminal Puller...................................................1188 

Terminal Spreader and Cleaner.........................1188 

Tool Three-Way.................................................1189 

Bearing 

Bearing and Seal Puller.....................................1237 

Bearing Packer, Hand....................................... 1222 

Puller Set, Rear Axle................................. 1140,1157 

Bearing Race and Seal Set.........................1156,1221 

Bendix Drum Brake Spring Tool......................... 1206 

Bi-Metaloy®, Hacksaw Blades............................ 994 

Bits, Screwdriving.................................633,824-826 

Bit Sockets.. 112-118,123-124,156-160,176-178,193- 

195,217-219,235-240,269-272,296-298,316,326- 

327,357-359,383-385 

Bit Sockets 

Bit Holders.......................................................... 239 

Hex........................................................................... 

156-157,176-178,193-195,217-219,235-237,269- 

272,296-297 

Screwdriver................................................. 240,298 

Sets.......................................................................... 

112-118,123-124,156-157,176-178,217-219,269- 

272,316,357-359 

Torx®............................. 158-160,194,238-240,298 

Triple Square........................................ 158,237,326 

Blades, Replacement Measuring..............1064-1065 

Blocks 

Lineman’s......................................................... 1377 

Manila and Wire Rope........................................1375 

Manila Rope 

Drop Link......................................................1373 

Eastern.........................................................1374 

Nylon...................................................1374-1375 

Safety Locking..............................................1373 

Steel Shell.....................................................1372 

Wood Shell...........................................1369,1371 

Try Net.............................................................. 1377 

Wire Rope 

Team Snatch.................................................1374 

Body Tools, Vehicle.........1102,1198-1200,1202-1203 

Body Tools, Vehicle 

Clip Set............................................................. 1200 

Dent Remover................................................... 1203 

Trim Pad set......................................................1198 

Trim Tools....................................... 1199-1200,1202 

BowHack® 

Hand Saws......................................................... 997 

Box Wrenches................................. 718-719,724-730 

Brake 

Adjusting Tool Drum................................ 1206-1207 

and Engine Cylinder Hone Set............................1215 

Bleeder Adapter........................................1210-1211 

Bleeder Tank........................................... 1208-1209 

Cylinder Hone....................................................1215 

Drum Gauge Digital.................................. 1074,1218 

Lining Gauge.....................................................1216 

Pad Spreader, Disc............................................1207 

Piston Tool, Disc................................................1207 

Resetting Gauge................................................1217 

Service Set......................................1153-1154,1205 

Shoe Retaining Spring Tool...................... 1206-1207 

Spring Pliers..................................................... 1206 

Thickness Gauge..............................1074,1216,1218 

Brake and Wheel Tools, Vehicle............... 1140,1153- 

1154,1156-1157,1205-1211,1214-1217,1219-1222 

Brass Hammers................................................... 1097 

Breaker Bars.146,181,223,277,318,365,387,398,409 

Breaker Bars 

1/4" Drive.....................................................146,181 

3/8" Drive....................................................223,277 

1/2" Drive.................................................... 318,365 

3/4" Drive.................................................... 387,398 

1" Drive.............................................................. 409 

Brick Hammers 



Solid Steel........................................................ 1085 

Wide Bit............................................................ 1085 

Brushes....................................................... 1186-1187 

Brushes 

Stainless Steel...................................................1187 

Wire-End, Knot-type..........................................1186 

Wire Scratch, Shoe Handle................................1187 

Bubble Flaring Tool Kit............................... 1161,1213 

Budd Wheel Socket, Impact...........................511,519 

Bushing Remover and Inserter Set... 1159,1177-1178 

Cabinets, Tool 

Industrial Series..............................................69-73 

Professional Series..........................................75-76 

Standard Series............................................... 77-79 

TEP Series.......................................................64-66 

XL Series.........................................................60-62 

C 

Cable 

Coated.............................................................. 1302 

19 

I N D E X 

1413


I N D E X 19 

Stainless Steel.................................................. 1303 

Tow...................................................................1307 

Uncoated.......................................................... 1302 

Cable Pullers........................................................1311 

Caliper Digital..............................................1074,1217 

Carburetor Adjusting Tool...................................1174 

Carts 

MCAT GMTK Cart................................................. 56 

XL Series.........................................................62-63 

C-Clamps 

Deep Throat.......................................................1144 

General Service.................................................1142 

Heavy Duty........................................................1141 

High Visibility............................................1145-1146 

Spatter Resisting......................................1143-1144 

Square Throat....................................................1143 

Chain 

Alloy Trawl........................................................ 1280 

Aluminum......................................................... 1285 

Ball................................................................... 1300 

BBB.................................................................. 1277 

Binder...................................................... 1305-1307 

Cam-Alloy................................................ 1283-1284 

Cathedral.......................................................... 1299 

Clam Shells...................................................... 1304 

Clock................................................................ 1299 

Coil.......................................................... 1287-1290 

Construction..................................................... 1304 

Deck Lashing.....................................................1279 

Decorator......................................................... 1298 

Dock Fender......................................................1282 

Double Loop 

Inco..................................................... 1293-1295 

Fishing.............................................................. 1283 

High Test................................................. 1277-1279 

Hobby/Craft............................................. 1298-1301 

Jack................................................................. 1296 

Log................................................................... 1305 

Machine................................................... 1285-1287 

Marine Proof Coil...............................................1276 

Mooring.............................................................1276 

Passing Link............................................ 1290-1291 

Pet.................................................................... 1308 

Plastic...............................................................1301 

Plumber’s......................................................... 1293 

Porch Swing..................................................... 1309 

Proof Coil................................................. 1272-1275 

Sash........................................................ 1297-1298 

Single Loop 

Lock Link..................................................... 1292 


Studio................................................................1289 

Sweep...............................................................1279 

Tow...................................................................1307 

Transport................................................. 1280-1282 

Tuna..................................................................1282 

Utility.................................................................1291 

Well.................................................................. 1295 

Winch Line........................................................ 1305 

Chain Pipe, Tong................................................... 767 

Chain Wrench............................................... 768,1229 

Challenge 

Long Blades...................................................... 1049 

Chests, Tool............................................................. 80 

Chests, Tool 

Industrial Series..............................................69-72 

Professional Series.......................................... 74-75 

Standard Series...............................................76-78 

TEP Series.......................................................63-65 

XL Series.........................................................60-61 

Chisels......................1104-1106,1111-1113,1122-1123 

Chisels 

Cape.................................................................. 1112 

Cold.........................................1105-1106,1111-1112 

Diamond Point................................................... 1113 

Rivet Buster....................................................... 1112 

Round Nose....................................................... 1113 

Sets.................................................1104-1106,1122 

Tool Steel..................................................1104,1111 

Chuck Keys.......................................................... 1258 

Chucks 

Adapt-A-Drive® Chuck.....................................1257 

Bridgeport® Taper to Jacobs® Taper.............. 1254 

Die Grinder....................................................... 1250 

Drain................................................................ 1258 

Ejecting Drifts................................................... 1255 

Extension Sockets-Morse Taper Archer® Series 

800................................................................... 1255 

Hand-Tite®...................................................... 1256 

High Torque / High Precision.................... 1248-1249 

Keyleashes........................................................1259 

Keys..................................................................1259 

Morse Taper to Jacobs® Taper.........................1252 

Multi-Craft® Chucks........................................ 1256 

Plain Bearing Industrial Chucks............... 1245-1247 

Professional..............................................1256,1259 

Replacement Parts............................................1257 

Service Kits............................................. 1244-1245 


Straight Shank to Jacobs® Taper.................... 1253 

Super Chuck® Ball Bearing Chucks..................1244 

Tap Chuck Collets............................................. 1250 

Threaded Shank to Morse Taper....................... 1253 

Circuit and Spark Plug Tester.............................1191 

Circuit Continuity Tester.....................................1191 

Circuit Tester.............................................. 1190-1191 

Clamps 

Chain Connector............................................... 1406 

Hand Grip......................................................... 1409 

Horizontal Plate....................................... 1409-1410 

Locking “E”............................................. 1407-1408 

Non-Marring, Rubber Pad........................1406-1407 

SAC (Screw-Adjusted Cam).....................1408-1409 

Sharp Leg......................................................... 1407 

Short Leg Structural......................................... 1405 

Single Drum Lifter.............................................1410 

Twin Drum Lifter.......................................1410-1411 

“GXL”............................................................... 1404 

“GX”........................................................1405-1406 

Clevises 

Double...............................................................1313 

Farm..................................................................1315 

Twisted, Straight...............................................1314 

Utility.................................................................1315 

Clips 

Bundling............................................................1337 

Forged Wire Rope............................................. 1336 

Stainless Steel..........................................1330,1337 

Clutch Alignment Set.......................................... 1237 

Coil Spring Compressor...................................... 1235 

Cold Shuts............................................................1313 

Collets 

Die Grinder........................................................1251 

Lathe Chuck......................................................1251 

Tap Chuck........................................................ 1250 

Combined Double / Bubble Flaring Tool Kit.............. 

1161,1212 

Compass/Keyhole Saw 

Predator®.......................................................... 997 

Compression Tester................................... 1164-1165 

Construction Wrenches 

Black Oxide........................................................ 768 

Coping Saw............................................................ 996 

Corbin Style Hose Clamp Pliers...................880,1163 

Crankshaft Holding Tool, Honda Acura..............1176 

Crowfoot Wrenches.................................................... 

216,234,268-269,294-295,356,382,716-718,750- 

754 

Crowfoot Wrenches 

Flare Nut...................................................... 382,754 

Ratcheting............................................ 233,715-716 

3/8" Drive..................................... 233-234,715-718 

1/2" Drive..................................... 356,382,753-754 

Current Indicator..................................................1192 

Cutters, Chain and Cable.................................... 1309 

Cutters, Speed 

Quick-Clip®....................................................... 947 

Cutters 

Hand Operated...................................953-965,1134 

Hand Operated 

1-1/4"............................................................ 961 

2".................................................................. 961 

3/4"............................................................... 960 

Cable......................................................956,958 

Center Cut............................................. 953-954 

Clipper Cut..................................................... 954 

Compact 

Cable......................................................... 962 

Electric Cable................................................. 959 

Fiberglass Handles........................................ 955 

General Purpose 

Center Cut................................................. 953 

Guy Strand..................................................... 964 

Hand Operated 

Cable......................................................... 957 

Hard Cable..................................................... 963 

Heavy Duty.................................................... 965 

Intermediate.................................................. 965 

Keeper........................................................... 956 

Nipper............................................................ 956 

One Hand Operated 

Soft Cable.................................................. 962 

Rebar............................................................. 959 

Slotted Angle................................................. 962 

Soft Cable.............................................. 963-964 

Steel Handles................................................. 955 

Wire Rope...................................................... 964 

Wire Rope 

Cable.................................................. 958,960 

Work Station.................................................. 957 

Hydraulic.....................................................969-979 

Hydraulic 

Cutter 

Hydraulic 

Cable.................................................... 973 

Hydraulic Rod, Bar and Wire Straightener 

Workhead............................................. 976 

Iron Grating........................................... 974 

Pipe...................................................... 977 

Rod and Bar................................... 972,976 

Soft Nut Splitter.................................... 973 

Strip Shear............................................ 974 

Tire Bead.............................................. 974 

Wire Rope...................................... 972,975 

Workhead 

Angular Rod and Bar.................................. 972 

Carbide Jaw Edges.................................... 973 

Hydraulic 

Rod and Bar.......................................... 975 

Rod and Bar............................................... 975 

1414


Soft Cable.................................................. 976 

Tire Bead................................................... 977 

Hydraulic System.........................................969-971 

Pneumatic...................................................981-982 

Pneumatic 

Cable............................................................. 982 

Heavy Duty.................................................... 982 

Light Duty...................................................... 982 

CV Boot 

Clamp Tightening Wrench................................ 1236 

Clamp Tool....................................................... 1235 

Cylinder Head Rethreader Kit..............................1194 

Cylinder Hone Replacement Stones..........1182,1215 

D 

Deburring Tool......................................................1215 

Deep Throat C-Clamps.............................. 1144-1146 

Dees......................................................................1317 

Dent Puller........................................................... 1203 

Dial Indicator...............................................1075,1217 

Diesel Compression Test Kit...............................1165 

Diesel Ring Compressor......................................1180 

Disc Brake 

Pad Separator - Heavy Duty............................. 1208 

Pad Spreader.....................................................1207 

Piston Tool.........................................................1207 

Rotor/Ball Joint Gauge.............................. 1074,1218 

Distributor Clamp Wrench...................................1192 

Door Handle and Window Lift Remover............. 1202 

Door Panel Removers..........................................1198 

Double Flaring Tool Kit......................1160-1161,1213 

Double-X Pliers..........................................874-877 

Drag Link, Socket.................................................. 383 

Drive Tools and Accessories 

Hand.............................................................109-111 

Hand 

1/4" Drive....................144-149,160,178-184,195 

3/8" Drive................................223-226,276-281 

1/2" Drive................................318-320,364-367 

Drum Deheader....................................................1411 

E 

EFI Pressure Tester (Multiport Fuel Injection)...1171 

Ejecting Drifts..................................................... 1255 

Engine/Automatic Trans. Oil Pressure Check Kit..... 

1166 

Engine 

Cylinder Flex-Hone............................................1182 

Cylinder Hone....................................................1181 

Cylinder Ridge Reamer......................................1181 

Valve Spring Compressor Small.........................1183 

Engine Tools, Vehicle.............. 1076,1153-1154,1157- 

1160,1164-1185,1192-1195,1224-1231 

Exhaust and Tailpipe 

Cutter................................................................1185 

Expander...........................................................1185 

Extensions......... 111,148-149,183-184,225-226,279- 

281,319-321,366-368,387,399,410,422 

Extensions 

Hand..111,148-149,183-184,225-226,279-281,319- 

321,366-368,387,399,410,422 

Hand 

1/4" Drive................................. 148-149,183-184 

3/8" Drive................................225-226,279-281 

1/2" Drive................................319-321,366-368 

3/4" Drive............................................... 387,399 

1" Drive...........................................................410 

Impact 

1/4" Drive...............................................432,438 

3/8" Drive....................................... 448,457-458 

1/2" Drive........................................474,487-488 

3/4" Drive...............................................500,505 

1" Drive...........................................................514 

1-1/2" Drive................................................... 520 

Power 

1/4" Drive...................................................... 438 

Vortex............................................................. 422 

External Thread Restorer File 

Metric................................................................. 988 

SAE.................................................................... 988 

Extractors, Screw..........................................989,991 

Eye Bolts.............................................1147-1148,1361 

Eyes, Pad............................................................. 1362 

F 

Fan Clutch Pulley Holder 

Set.....................................................................1176 

Fan Clutch Service 

Set............................................................ 1154,1175 

Fan Clutch Wrench...............................................1176 

Feeler Gauges...........................1071-1073,1078-1079 

Fender Cover....................................................... 1238 

Ferrules and Stops.............................................. 1328 

Fiberglass Tapes........................................1053-1054 


Pro Series......................................................... 1053 

Field I.D. Tags...................................................... 1402 

Files 

4-in-Hand (Formerly Shoe Rasp)...................... 1021 

Accessories............................................. 1032-1033 

Accessories 

Ergonomic................................................... 1033 

No. 25.......................................................... 1032 

Plastic.................................................1033-1034 

Wooden........................................................ 1034 

Aluminum 

American Pattern......................................... 1007 

American Pattern..................1002-1023,1035-1036 

American Pattern 

1 and 2 Round Edges....................................1015 

Chain Saw.................................................... 1008 

Diamond...................................................... 1021 

Double 

Extra Slim................................................ 1018 

Extra Slim.....................................................1018 

Flat......................................................1008,1013 

Flat Bastard.........................................1023,1035 

Garden..........................................................1011 

Half Rasp 

Half File................................................... 1023 

Half Round...........................................1020,1036 

Heavy............................................................1016 

Lathe File 

Bastard.................................................... 1012 

Fine......................................................... 1012 

Machete........................................................1017 

Magicut® 

Plater's Special........................................ 1022 

Pattern Maker's........................................... 1021 

Plain 1/2 File................................................ 1022 

Regular.........................................................1017 

Round.......................................................... 1007 

Round Bastard.....................................1023,1036 

Slim..............................................................1017 

Tanged......................................................... 1022 

Type "A" Flat................................................ 1007 

Axe Sharpening.................................................1015 

Babbit 

Curved Tooth Files........................................1031 

Barrette.............................................................1024 

Barrette 

Swiss Pattern...............................................1024 

Bodifiles 

Curved Tooth Files....................................... 1030 

Cabinet Rasp.................................................... 1021 

Cabinet Rasp 

Pattern Maker's........................................... 1021 

Chain Saw 

American Pattern................................ 1007-1008 

Curved Tooth Files...................................1030-1032 

Curved Tooth Files 

Babbit...........................................................1031 

Bodifiles....................................................... 1030 

Rigid Type.................................................... 1030 

Utility Files....................................................1031 

Without Tang................................................ 1030 

Depth Gauge 


Diamond 


Die Sinker's Rifflers...........................................1024 

Double Ender.................................................... 1008 

Equaling........................................................... 1025 

Ergonomic...............................................1002-1003 

Farmer's Own................................................... 1008 

Farrier's Handy Rasps...................................... 1022 

Flat................................................................... 1009 

Flat 

Curved Tooth Files..............................1030-1031 

Flat Bastard 


Flexible Files..................................................... 1030 

Garden...............................................................1011 

General Purpose............................................... 1004 

Half Round....................................... 1010,1025,1031 

Half Round 


Hand..................................................................1011 

Handy................................................................1011 

Handy Man's Home.......................................... 1005 

Hobby............................................................... 1006 

Home.................................................................1011 

Horse Rasp 

American Pattern................................ 1021-1022 

Plain 1/2 File................................................ 1022 

Plater's Special 

American Pattern..................................... 1022 

Tanged......................................................... 1022 

Knife..................................................................1012 

Long Angle 

Bastard 


Fine 


Machete 

American Pattern..........................................1017 

Machinist.......................................................... 1004 

Machinist File................................................... 1003 

Magicut® 

American Pattern..........................................1013 



Maintenance File.............................................. 1003 

Mill....................................................................1014 

Milled Tooth 

Curved Tooth Files....................................... 1030 

Needle.....................................................1026-1027 

Needle 

Swiss Pattern.............................................. 1025 

19 

I N D E X 

1415


I N D E X 19 

Pack................................................................. 1005 

Pattern Maker's 


Pillar................................................................. 1027 

Pillar 

Swiss Pattern.............................................. 1028 

Pippin............................................................... 1028 


Horse Rasp 


Round.......................................................1016,1029 

Round Bastard 


Shoe Rasp 


Silversmith's Rifflers........................................ 1029 

Square...............................................................1015 

Super Shear...................................................... 1032 

Swiss Pattern................................. 1006,1024-1029 

Swiss Pattern 

Extra Narrow............................................... 1028 

Hot Die..........................................................1024 

Narrow......................................................... 1028 

Round Handle.............................................. 1025 

Taper 

American Pattern.................................1016-1018 

Extra Slim 


Regular.........................................................1017 

Thread Restoring.....................................1005-1006 

Three Square.....................................................1019 

Tungsten Point...................................................1019 

Utility Files 

Curved Tooth Files........................................1031 

Veneer Knife......................................................1019 

Warding....................................................1020,1029 

Wood (Coarse) 


Wood Chuck..................................................... 1020 

Woodcraft Rasp 

Half Rasp 

Half File................................................... 1023 

Wood Rasps 


Half Round................................................... 1023 

X.F.® 

Needle......................................................... 1006 

Flange Jack........................................................... 766 

Flare Nut Wrenches...........711-714,740-741,746-747 

Flare Nut Wrenches 

Flex...............................................................711-712 

Ratcheting..................................... 710-711,748-749 

Flashlight............................................................. 1238 

Flex Head Ratchets 

1/4" Drive.....................................................145,179 

3/8" Drive..................................... 220-221,273,275 

1/2" Drive............................................. 317,360,362 

Flex Sockets........144,155,214,232,267,293,355,381 

Flex T / Breaker Bars.146,181,223,277,318,365,387, 

398,409 

Flywheel Turner...................................................1164 

Folding Wood Rules...................................1066-1068 

Folding Wood Rules 

Brick Mason's................................................... 1068 

Doyle Log Scale................................................ 1068 

Engineer's........................................................ 1067 

Extension......................................................... 1066 

Modular Spacing.............................................. 1068 

Plumber's......................................................... 1067 

Red End®........................................................ 1066 

Two Way........................................................... 1067 

Fold-up Sets...................................................527-534 

Front End Service Set.................................1155,1232 

Fuel & Trans Line Disconnect Set..............1153,1169 

Fuel and Oil Filter Wrench.................................. 1225 

Fuel Filter Tool......................................................1171 

Fuel Injection System Tool Kit............................1171 

Fuel Line 

Coupling Tool Ford.............................................1168 

Disconnect........................................................1170 

Disconnect Set, Low profile...............................1168 

Kit......................................................................1167 

Quick Disconnect Tool.......................................1168 

Fuel Pump Vacuum and Pressure Tester...........1171 

G 

Gatehooks.............................................................1318 

Gauges, Feeler.........................1071-1073,1078-1079 

Gear Pullers.................................................1137-1139 

Gear Pullers 

Ratcheting Pullers....................................1137-1138 

GearRatchet Handle...........................................416 

General Purpose Bushing Set....................1159,1177 

Gloves.................................................................. 1238 

GMTK (General Mechanics Tool Kit) 

Accessory Tray..................................................... 56 

Cart...................................................................... 56 

Kits..................................................................54-55 

H 

Hacksaw Blades............................................ 994-995 

Hacksaw Blades 

Bi-Metaloy.......................................................... 994 

Solid Flexible...................................................... 995 

Hacksaw Frames........................................... 992-993 

Hacksaw Frames 

4-in-1................................................................. 992 

Cushion Grip....................................................... 992 

Economy............................................................. 993 

General Purpose................................................. 993 

Heavy Duty......................................................... 992 

High Tension....................................................... 992 

Half Hatchet 

Octagon Pole.................................................... 1090 

Half Moon Wrenches..............................629-630,730 

Hammers..................................1084-1090,1092-1102 

Hammers 

Ball Pein..........................................1084,1092,1100 

Blacksmith.............................................. 1084,1093 

Brass................................................................ 1097 

Brick........................................................1085-1086 

Brick 

Fiberglass Handled...................................... 1085 

Claw..............................1087-1089,1092-1093,1100 

Copper.............................................................. 1098 

Curved Claw..................................................... 1087 

Curved Claw 

Anti-Shock................................................... 1088 

Premium...................................................... 1089 

Dead Blow...................................... 1094-1096,1101 

Drilling.............................................1089,1093,1101 

Engineer's................................................1090,1101 

Half Hatchet 

Hickory Handle............................................ 1090 

Hand Drilling..................................................... 1089 

Hatchet....................................................1090-1091 

Hatchet 

Expert California.......................................... 1091 

Prospecting...................................................... 1086 

Ripping Claw........................................... 1087-1088 

Ripping Claw 

Anti-Shock................................................... 1088 

Premium...................................................... 1089 

Rubber Mallet........................................... 1097,1102 

Scaling Hammers............................................. 1086 

Sets...................................................................1100 

Sledge, Double Face......................................... 1094 

Soft Face........................................ 1098-1099,1102 

Hand Bearing Packer.......................................... 1222 

Hand Box, Tool Storage............................... 80-81,84 

Hand Hammer 

Blacksmith Handled.......................................... 1084 

Handi-Hex...................................................573-574 

Hand Operated Closer 

Net-Link............................................................. 965 

Hand Operated Cutters 

ACSR 

Cable............................................................. 958 

Angular Style...................................................... 955 

Bender................................................................ 959 

Bolt..................................................................... 956 

Bolt 

Center Cut..................................................... 953 

B Strand............................................................. 958 

Communications Cable....................................... 959 

Compact............................................................. 959 

End Cut............................................................... 956 

General Purpose................................................. 954 

Handklip............................................................. 961 

Hand-Operated................................................... 957 

Heavy Duty..................................................955-957 

Industrial Grade.......................................... 953-954 

Iron Shear........................................................... 962 

Linkmaster®...................................................... 965 

Linksem®.......................................................... 965 

Nut Splitter......................................................... 960 

Pocket 

Cable............................................................. 960 

Ratchet-Type.............................................. 963-964 

Ratchet-Type 

Cable............................................................. 962 

Soft Cable...................................................... 962 

Shear Type......................................................... 958 

Shear Type 

Cable............................................................. 957 

Steel Strap................................................. 960-961 

Steel Strap 

2".................................................................. 961 

Swaging Tool...................................................... 958 

Wire.................................................................... 960 

Hand Saws..................................................... 993-998 

Hand Saws 

Combination Bowsaw and Hacksaw................... 997 

Compass/Keyhole Saw....................................... 997 

Coping Saw........................................................ 996 

Coping Saw Blades............................................. 996 

Predator®.......................................................... 995 

Professional........................................................ 995 

Pruner.........................................................997-998 

Quik-Cut Economy Handsaw.............................. 996 

Harmonic Balancer Installer...............................1178 

Harmonic Balancer Puller Set.............................1179 

Hatchets.....................................................1090-1091 

Hatchets 

Broad................................................................ 1090 

Expert Shingling............................................... 1091 

Lathe................................................................ 1091 

Register............................................................ 1091 

Hex Bit / Driver Sockets 

1416


Hand 

1/4" Drive................... 156-158,176-178,193-195 

3/8" Drive................................235-237,296-297 

1/2" Drive....................................... 326,383-384 

Impact...............446,451,472-473,479,504,511,513 

Impact 

3/8" Drive...................................................... 451 

1/2" Drive...................................................... 479 

3/4" Drive................................................ 511,513 

Hex Keys 

Fold-up Sets................................................527-534 

L Keys......................................................... 534-558 

T-Handles....................................................558-573 

High-Low Voltage Tester.....................................1190 

Hitch Pins and Clips....................................1313-1314 

Hog Ring Pliers........................................... 1201-1202 

Hooks & Picks............................................ 1196-1198 

Hooks & Picks 

Sets..........................................................1196,1239 

Hooks 

Alloy Grab.................................................1392,1400 

Alloy Sling.................................................1390,1399 

Alloy “J”........................................................... 1402 

Alloy “S”........................................................... 1402 

Come-Along..................................................... 1377 

Foundry................................................... 1391-1392 

Grab..................................................................1352 

Grab (Import)..........................1331-1332,1351-1352 

Hoist........................................................1346-1349 

Latch Kit for............................1354-1355,1391,1400 

Self-locking.................................... 1393-1394,1401 

Slip................................................................... 1353 

Slip (Import)............................1332-1333,1351,1353 

Snap................................................................. 1350 

Sorting............................................................. 1350 

Tractor Draw Bar...............................................1331 

“S”....................................................................1312 

Hose Clamp Pliers Large..............................880,1163 

Hose Pinch-Off Pliers...........................880-881,1162 

HVAC Tools..................................................... 938-940 

HVAC Tools 

Crimper...................................................... 938-939 

Folding Tools...................................................... 940 

Hand Notcher..................................................... 939 

Hand Seamer...................................................... 939 

Ratcheting Wrench.......................................627,733 

Tensioning Too, Cable Tie................................... 940 

Hydraulic Accessories.................................. 979-981 

Hydraulic Accessories 

Air Foot Switch 

Optional Controls........................................... 981 

Control Handle.................................................... 980 

Control Handles.................................................. 981 

Electric Foot Switch 

Optional Controls........................................... 981 

Electric Solenoid-Operated Air Valve.................. 981 

Hydraulic Hose............................................979-980 

Hydraulic Hose 

Swivel Disconnect......................................... 980 

Hydraulic Hose for HKH02 and HKA01.............. 980 

Optional Controls................................................ 981 

Optional Controls 

Air Foot Switch.............................................. 981 

Electric Foot Switch....................................... 981 

Hydraulic Clutch Ln Disc............................1169,1236 

Hydraulic Cutters 

Cutter 

Hydraulic 

Cable......................................................... 973 

Hydraulic Rod, Bar and Wire Straightener 

Workhead.................................................. 976 

Iron Grating............................................... 974 

Pipe........................................................... 977 

Rod and Bar........................................ 972,976 

Soft Nut Splitter......................................... 973 

Strip Shear................................................ 974 

Tire Bead................................................... 974 

Wire Rope........................................... 972,975 

Workhead 

Angular Rod and Bar...................................... 972 

Carbide Jaw Edges........................................ 973 

Hydraulic 

Rod and Bar............................................... 975 

Rod and Bar................................................... 975 

Soft Cable...................................................... 976 

Tire Bead....................................................... 977 

Hydraulic Cutter System 

Cable.................................................................. 969 

Carbide Jaw Edges............................................. 970 

Iron Grating........................................................ 971 

Rod and Bar........................................................ 969 

Soft Nut Splitter.................................................. 970 

Strip Shear......................................................... 970 

Tire Bead............................................................ 971 

Tire Chain........................................................... 971 

Wire Rope........................................................... 969 

Hydraulic Pumps................................................... 979 

Hydraulic Pumps 

Air Hydraulic....................................................... 978 

Manual Hand...................................................... 978 

I 

Ignition File...........................................................1193 

Ignition Tester 

HEI.....................................................................1191 

Standard...........................................................1192 

Impact Driver Set, Hand..................... 988,1223,1240 

Impact Tool Sockets and Accessories, Power.......... 

426-524 

Impact Tool Sockets and Accessories, Power 

Impact Drive Tools.432-433,438,448,457-459,474- 

475,487-489,500,505-506,514,520 

Impact Drive Tools 

Adapters............. 448,459,474,489,500,506,520 

Universal Joints.........448,458,475,488,505,520 

Impact Extensions. 432,438,448,457-458,474,487- 

488,500,505,514,520 

Impact Extensions 

3/8" Drive....................................... 448,457-458 

1/2" Drive........................................474,487-488 

3/4" Drive...............................................500,505 

1-1/2" Drive................................................... 520 

Impact Hex Bits / Drivers.......................................... 

446,451,472-473,479,504,511,513 

Impact Hex Bits / Drivers 

3/8" Drive...................................................... 451 

1/2" Drive...................................................... 479 

Impact Sets.......... 426-431,437,443-445,453,455- 

456,468-472,482,484-486,504-505 

Impact Sets 

1/4" Drive........................................426-431,437 

3/8" Drive........................443-445,453,455-456 

1/2" Drive........................ 468-472,482,484-486 

3/4" Drive.............................................. 504-505 

Impact Sockets..................................................426- 

437,441-445,447,449-450,452-457,460-478,480- 

487,490-499,501-505,507-513,515-519,521-524 


Hex Bit / Driver Sockets....................................... 

446,451,472-473,479,504,511,513 

Universal Sockets................................................ 

431-432,436,447,452,454,457,463,467,473- 

474,480-481,483,487,495,499 

1/4" Drive................................433-435,441-442 

3/8" Drive................449-450,460-462,464-466 

1/2" Drive................ 475-478,490-494,496-498 

3/4" Drive.................. 501-503,507-510,512-513 

1-1/2" Drive............................................521-524 

Indexible Ratchet 

1/4" Drive............................................................180 

3/8" Drive........................................................... 276 

1/2" Drive........................................................... 363 

Industrial Trimming 

Grape Thinning................................................... 949 

Orchid Snips....................................................... 949 

Inner Tie Rod Tool............................................... 1234 

Inspection Mirrors......................................1077,1080 

J 

Jab Saw......................................................... 993-994 

Jab Saw 

Utility Hacksaw................................................... 993 

Jacks, Flange........................................................ 766 

K 

Keyless Chucks 

Industrial High Torque / High Precision.... 1248-1249 

Industrial Medium Duty.....................................1249 

Portable Tools................................................... 1256 

Knives.................................................................... 942 

L 

L600 Series, Tape Measures 


Leader® 

Long Blades...................................................... 1049 

Lifting Eye....................................................1147-1148 

Links 

Alloy Master............................................ 1394-1395 

Alloy Sub-Assemblies....................................... 1395 

Connecting....................................................... 1367 

Coupling........................................................... 1398 

Quick & Spring......................................... 1324-1325 

Repair................................................................1312 

Weldless Sling.................................................. 1360 

Little-Nic® 

Jab Saw............................................................. 993 

L Keys............................................................. 534-558 

Load Binders........................................................1311 

Locking Extensions............................... 321,367-368 

Lock Nut Tool....................................................... 1220 

Long Blades 

Speedwinder®................................................. 1050 

Loops, Footman.................................................. 1327 

Low-Voltage Circuit Tester..................................1190 

M 

Macpherson Strut Spring Compressor............. 1235 

Magnetic Drive Tools..................................... 109-110 

Magnetic Drive Tools 

Adapters..............................................................111 

Universal Joints...................................................110 

Magnetic Parts Tray................................................ 68 

Magnetic Pickup Tool......................................... 1080 

Mallet, Rubber.............................................1097,1102 

Master Bolt Grip Set...................................1155,1178 

Master Sets 

Basic...............................................................49-53 

Intermediate...............................31-34,36-39,41-47 

19 

I N D E X 

1417


I N D E X 19 

Ultimate...........................................................24-29 

MAXX Ratchet, Armstrong 

1/4" Drive............................................................179 

3/8" Drive.................................................... 274-275 

1/2" Drive........................................................... 361 

Measuring 

Doyle Log Scale................................................ 1068 

Fiberglass Tapes.....................................1053-1054 


Linear.......................................................... 1054 

Folding Wood Rule............................................ 1066 

Folding Wood Rules.................................1066-1068 

Long Blades............................................. 1049-1051 

Long Blades 

Diameter and Tree Tapes..............................1051 

Long Steel Tape........................................... 1050 

Speedwinder®............................................ 1050 

Universal Lightweight...................................1051 

Measuring Rules............................................... 1069 

Measuring Rules 

Aluminum.................................................... 1069 

One-Piece.................................................... 1069 

School Shop................................................. 1069 

Measuring Stick 

Metric English 

Aluminum................................................ 1070 

Measuring Wheels.............................................1070 

Miscellaneous Measuring................................. 1065 

Miscellaneous Measuring 

Handle......................................................... 1065 

Handles........................................................ 1066 

Oil Gauging 

Plumb Bobs................................................. 1059 

Oil Gauging Tapes 

Chrome Clad®............................................. 1058 

Chrome Clad® 

Nubian®................................................. 1057 

Nubian®...................................................... 1058 

Stainless Steel®.......................................... 1058 

Pocket Tapes...........................................1046-1047 

Pocket Tapes 

Chrome Clad®............................................. 1046 

Diameter.......................................................1047 

Pocket Scale.................................................1047 

ThinLine........................................................1047 

Precision................................ 1074-1076,1217-1218 

Pro Series......................................................... 1053 

Reels & Frames 

Reel for Over 100' Lengths.......................... 1064 

Reel for Peerless Chrome Clad® Tapes....... 1064 

Reels for Chrome Clad® and Gauging Tapes....... 

1064 

Replacement Reel...............................1064-1065 

Surveying 

Replacement Reel.................................... 1065 

Replacement Parts and Blades................1064-1065 

Steel Rule......................................................... 1068 

Surveying Tapes......................................1062-1063 

Surveying Tapes 

Nubian®...................................................... 1061 

Ny-Clad® 

Steel Tapes.............................................. 1061 

Synthetic Tapes 

Tapes........................................................... 1054 

Tape Measures, Power Return........ 1042-1044,1046 

Tape Measures, Power Return 

Auto-Lock.................................................... 1045 

Auto-Lock 

Magnetic End Hook.................................. 1045 


Power Tapes................................................ 1043 

Xtra-Wide Control Power Tape..................... 1044 

Xtra-Wide Power Tape................................. 1044 

Mechanics Tool Sets....90-105,119-122,125-137,161- 

172,196-207,241-255,299-308,328-341,386,389- 

394,404-408,413-415 

Mezurall 

Pocket Tapes.................................................... 1046 

Mini Screwdrivers..........................................816-818 

Mirrors, Inspection.....................................1077,1080 

Multi-Craft® Chucks.......................................... 1256 

N 

Nail Pullers...........................................................1129 

Nail Pullers 

Pliers.................................................................1129 

Net Links, Seven Seas.........................................1316 

Nut Cracker 

Universal...........................................990,1223,1240 

Nutdrivers................................827-830,850-856,866 

Nutdrivers 

Hollow Shaft.........................................830,853,866 

Hollow Shaft 

Set........................................... 829,850-851,866 

Ratcheting...................................................827-828 

Shafts................................................................. 828 

T-Handle..................................................... 855-856 

Nuts, Eye.............................................................. 1362 

Nut Starters........................................................... 849 

O 

Oil Canister Socket 

Set...................................................1159-1160,1230 

Oil Cooler Line Disconnect........................ 1169-1170 

Oil Filter 

Cap Wrench.............................................. 1227,1231 

Sockets.............................................................1231 

Strap Wrench Heavy Duty................................. 1230 

Wrench 3-Jaw Universal.................................. 1229 

Wrench Adjustable........................................... 1225 

Wrench End Cap...................................... 1226-1227 

Wrench Heavy Duty Wide Band............... 1228-1229 

Wrench Nylon Strap.......................................... 1229 

Wrench Pliers................................................... 1228 

Wrench Universal............................................. 1225 

Oil Gauging................................................. 1057-1059 

Oil Pressure 

Check Kit...........................................................1166 

Sending Socket Deep........................................1173 

Oil-Seal Remover and Installer...........................1164 

Oil Sender Socket.................................................1172 

One-Man Brake Bleeder..................................... 1208 

O-Ring 

3/4" Drive........................................................... 506 

1" Drive...............................................................515 

1-1/2" Drive........................................................ 521 

O-Ring and Seal Pick.......................................... 1239 

Overhead Valve Spring Compressor 

Universal...........................................................1184 

Oxygen Sensor Socket.........................................1173 

Oxygen Sensor Socket 

Low Profile........................................................1173 

P 

P1000 Series, Tape Measures 


P2000 Series, Tape Measures 


Panel Clip Pliers.................................................. 1201 

Parts Cleaning Brush...........................................1187 

Parts Tray................................................................ 68 

Pass-Thru Rachet & Socket Sets (XL)...... 413-415 

Pass-Thru Rachet & Socket Sets (XL) 

Vortex Sockets for Pass-Thru..............416-421 

Pickup Tool..................................................1077,1080 

Pins 

Retaining, Impact Socket 

3/4" Drive...................................................... 506 

1" Drive...........................................................515 

1-1/2" Drive................................................... 521 

Pipe Cutters..........................................................1214 

Pipe Cutters 

Ratcheting.......................................................... 941 

Pipe Tong, Chain................................................... 767 

Pipe Wrench.......................................................... 766 

Piston Ring Compressor......................................1180 


Band..................................................................1180 

Heavy Duty........................................................1181 

Pliers.................................................................1179 

Set.....................................................................1179 

Piston Ring Groove Cleaner.................................1181 

Pitman Arm Puller............................................... 1235 

Pivot Pin Remover............................................... 1232 

Plain Bearing Industrial Chucks...............1245-1247 

Plastic Handle Drivers 

1/4" Drive............................................................181 

3/8" Drive........................................................... 277 

Pliers............................................................................ 

870-927,1162-1163,1179,1188,1193,1200-1202,1206 

Pliers 

Battery................................................878,887,1188 

Bent Nose............................................................916 

Brake Spring..................................................... 1206 

Button................................................................ 920 

Button 

Straighter Handle........................................... 920 

Cable Cutter....................................................... 901 

Carbide Cutters.................................................. 923 

Carpenter's Pincers............................................ 923 

C-Clamps 

Regular Tips................................................... 927 

Swivel Pad Tips............................................. 927 

Cee Tee Co.®......................................................915 

Chain Nose...........................................894-897,918 

Chain Nose 

Side Cutting....................................................918 

Cutting 

Diagonal........................................................ 924 

Lineman's...................................................... 924 

Long Nose..................................................... 924 

Diagonal Cutting............ 872-873,878,889-892,917 

Diagonal Cutting 

Plastic Handle.........................................921-922 

Plastic Handle 

Ergonomic................................................. 922 

Double-X.................................................874-877 

Duckbill.............................................................. 898 

Electrical Connector.....................................901,916 

End Cutting Nippers...................... 872-873,893,923 

Fence Staple Puller............................................. 921 

Fence Tool, Heavy-Duty...................................... 921 

Flat Nose..................................................... 874,898 

Hog Ring.................................................. 1201-1202 

Hose Clamp.................................879-880,888,1163 

Hose Pinch-Off................................... 880-881,1162 

Ignition............................................................... 886 

Insulated...............................................877-878,892 

Ironworkers.................................................893,920 

1418


Lineman's......................................872,878,892,919 

Lineman's 

Heavy-Duty.....................................................919 

Round Nose................................................... 920 

Locking....................................... 899-900,925-927 

Locking 

Cushion Grip 

Set..................................................... 899,925 

Locking Chain Clamp..................................... 927 

Long Nose 

Set............................................................ 925 

Regular Tips................................................... 927 

Set.................................................. 899,925-926 

Swivel Pad Tips............................................. 927 

Welder Clamp................................................ 927 

Wire Cutter.................................................... 926 

Locking Chain Clamp 

Quick Release................................................ 927 

Lock Ring............................................ 881,900-901 

Mini.............................................. 870-871,873-874 

Motor Kit Combination.........................................916 

Nail Puller..........................................................1129 

Needle Nose.................. 872-873,896-897,918-919 

Panel Clip..........................................................1201 

Piston Ring, Compressing..................................1179 

Push Pin.................................................. 1200-1201 

Quick Release 

Locking Pliers................................................ 927 

Retaining Ring..............................881-885,904-911 

Sets......................................................870-871,877 

Sheet Metal Clamp 

Welder Clamp................................................ 927 

Slip Joint............................... 871,887-888,915-916 

Thin Nose............................................................916 

Tongue and Groove........................871,886,914-915 

Welder Clamp 

Locking Pliers................................................ 927 

Wire Stripper...............................879,901-904,1193 

Wiretwister.................................................. 911-913 

Plumb Bob........................................................... 1059 

Plumb Bob 

Oil Gauging....................................................... 1059 

Pneumatic Cutters.........................................981-982 

Pneumatic Cutters 

Cable.................................................................. 982 

Heavy Duty......................................................... 982 

Light Duty........................................................... 982 

Pneumatic Tie Rod / Ball Joint Separator Kit........... 

1155,1232 

Power Sockets............................... 439-440,459,489 

Power Sockets 

Magnetic Self-Tapping Screws 

1/4" Drive...................................................... 439 

3/8" Drive...................................................... 459 

1/2" Drive...................................................... 489 

1/4" Drive................................................... 439-440 

Power Steering Pump Puller Set................1154,1177 

Precision Measuring................ 1074-1076,1217-1218 

Predator® 

Hand Saws......................................................... 995 

Pro Series 

Long Blades...................................................... 1050 

Prospecting Hammers 



Pro Swivoil Filter Wrench................................... 1224 

Pruner 

Curved................................................................ 997 

Double Edge....................................................... 997 

Silver Flash......................................................... 998 

Tuttle Tooth........................................................ 998 

Pry Bars...................................................... 1128-1133 

Pry Bars 

Adjustable.........................................................1128 

Aligning.............................................................1133 

Flat....................................................................1128 

Indexing....................................................1130-1131 

Rebar Benders...................................................1134 

Rolling Head......................................................1133 

Pullers, Gear................................................1137-1139 

Pulley Holder / Fan Clutch Tool Kit.....................1175 

Pulley Holder Universal.......................................1175 

Pulley Puller and Installer Set.............................1177 

Pulleys 

Die Cast Zinc.....................................................1326 

Heavy Duty........................................................1326 

Punch & Chisel 

Chisels................... 1104-1106,1111-1113,1122-1123 

Holder................................................................1110 

Sets........................................ 1103-1104,1120-1121 

Punches....................1106-1110,1114-1119,1122-1124 

Punches 

Aligning............................................................. 1118 

Brass 

Drift..............................................................1116 

Pin................................................................ 1115 

Solid............................................................. 1119 

Taper............................................................ 1119 

Center............................................................... 1118 

Drift.........................................1109-1110,1116-1117 

Pin........................................... 1108,1110,1115-1116 

Prick.................................................................. 1119 

Roll Pin......................................................1109,1117 

Sets, Tool Steel........................................1107-1108 

Starting............................................................. 1118 

Tool Steel................................................. 1114-1115 

Push Pin Pliers.................................................... 1200 

Push Pin Pliers 

80 Degree.........................................................1201 

Set.................................................................... 1200 

PVS, TVS and O2 socket......................................1172 

Q 

Quick-Clip® 

Replacement Blades........................................... 947 

Quick Disconnect Chrysler..................................1169 

Quickread® 


Quik-Cut Economy Handsaw................................ 996 

R 

Radio Removal Tool....................................1161,1204 

Rails, Socket...........................................67-68,81-82 

RapidSlide 

Adjustable Wrench............................................. 775 

Adjustable Wrenches.......................................... 780 

Rasps.......................................................... 1021-1023 

Ratcheting 

Screwdrivers....................................... 821-822,848 

Ratcheting Wrenches.............215,233,579-647,710- 

711,714-716,731-733,748-749,776 

Ratchets................................................ 106-109,144- 

146,178-180,195,220-222,273-276,299,317,360- 

364,385,387,397-398,408-409,412 

Ratchets 

Flex Head 

3/8" Drive....................................... 220-222,273 

Pass-Thru........................................................416 

Repair Kits.146,180,223,277,318,364,387,398,409, 

412 

Repair Kits 

1/4" Drive................................................146,180 

3/8" Drive...............................................223,277 

1/2" Drive............................................... 318,364 

Round Head 

1/4" Drive.......................................................180 

3/8" Drive...................................................... 276 

1/2" Drive...................................................... 363 

Tear Drop 

1/4" Drive................................. 144-145,178-179 

3/8" Drive................................220-222,273-275 

1/2" Drive........................................317,360-362 

1/4" Drive..............................................146,180,195 

3/8" Drive............................. 220-223,273-278,299 

1/2" Drive..............................317-318,360-364,385 

3/4" Drive.............................................387,397-398 

1" Drive...................................................... 408-409 

1-1/2" Drive.........................................................412 

Rear Axle Bearing Puller Set......................1140,1157 

Rebar Benders...............................................959,1134 

Remote Control Starter Switch...........................1164 

Renovation Bar 

Flat....................................................................1128 

Repair Blades 

Lightweight Snips............................................... 938 

Replacement 

Adjustable Wrenches 

First Generation............................................. 776 

Springs 

Knurls........................................................ 776 

Replacement Blades 

Quick-Clip®....................................................... 947 

Replacement Reel 

Derrick............................................................. 1064 

Engineering...................................................... 1065 

Western®......................................................... 1065 

Retaining Ring Pliers.............881-885,904-911,1200 

Ret Ring................................... 506,514-515,520-521 

Ret Ring 

3/4" Drive....................................................504,506 

1" Drive....................................................... 514-515 

Rings, Welded......................................................1316 

Rings, Welded, Seven Seas.................................1316 

Rings (Imported)..................................................1317 

Rings 

O, Impact Sockets 

3/4" Drive...................................................... 506 

Retaining Ring Impact Sockets 

1-1/2" Drive................................................... 520 

Rolls, Vinyl..........................................................82-83 

Rope Accessories 

Clamps..............................................................1327 

Cleats................................................................1327 

Roto Ratchet 

1/4" Drive............................................................146 

3/8" Drive........................................................... 222 

Rug Shears 

Candlewick Rugs................................................ 948 

Rules, Measuring..............................1066-1070,1076 

S 

Saws 

Hacksaw Blades................................................. 994 

Hacksaw Blades 

Carbon Steel.................................................. 995 

Hacksaw Frames.........................................992-993 

Hacksaw Frames 

Pro Series...................................................... 992 

Hand........................................................... 993-998 

Hand 

19 

I N D E X 

1419


I N D E X 19 

BowHack®.................................................... 997 

Curved........................................................... 997 

Double Edge.................................................. 997 

Predator®..................................................... 997 

Silver Flash.................................................... 998 

Tuttle Tooth.................................................... 998 

Jab Saw..................................................... 993-994 

Jab Saw 

Little-Nic®.................................................... 993 

Scaling Hammers 


Scissors & Shears 

Industrial Trimming 

Orchid Snips.................................................. 949 

Light Metal-Cutting Snips................................... 949 

Scissors 

Belt..................................................................... 946 

Craft................................................................... 943 

Electrician's........................................................ 949 

Electronics.......................................................... 949 

Filament............................................................. 949 

Home.................................................................. 943 

Leather............................................................... 946 

Pocket................................................................ 946 

Sew.................................................................... 943 

Sewing............................................................... 947 

Take-Apart......................................................... 944 

Scraper.................................................................1167 

Scraper and Sticker Remover............................ 1204 

Scraper Long Reach........................................... 1204 

Scraper Mini........................................................ 1204 

Scraper Set................................................. 1185-1186 

Scratch Awl 

Cushion Grip....................................................... 865 

Series 2000........................................................ 865 

Wood Handle...................................................... 866 

Screwdrivers................... 810-826,831-849,857-866 

Screwdrivers 

Cabinet Tip....................................819,835,839,844 

Cushion Grip 

Mechanic's 

Slotted Tip................................................. 863 

Phillips........................................................... 864 

Set..........................................................861-862 

Slotted Tip 

Stubby....................................................... 864 

Dual Material................. 810-816,831-832,857-858 

Dual Material 

Round Shank......................................... 859-860 

Square Shank................................................ 860 

Electrician's.................................................832-835 

Electrician's 

Slotted Tip..................................................... 864 

Slotted Tip 

Round Shank............................................. 863 

Insulated......................................................820-821 

Interchangeable Bit..................................... 824,865 

Interchangeable Bit 

Dual Material................................................. 861 

Mini............................................................. 817-818 

Offset.................................................. 826,848-849 

Phillips...................................................................... 

812,820,826,832,835,840-841,845-847,849 

Phillips Tip 

Dual Material................................................. 859 

Pocket Clip......................................................... 866 

Pozidriv............................................................... 821 

Precision 

6 Pc............................................................... 865 

Ratcheting Screwdriver....................... 821-823,848 

Series 2000 

Cushion Grip.................................................. 864 

Cushion Grip 

Stubby....................................................... 864 

Mechanic's 

Slotted Tip................................................. 863 

Slotted Tip..................................................... 864 

Slotted Tip 

Round Shank............................................. 863 

Slotted.............812,814,819-820,826,831,834,837- 

839,842-843,845-846,849 

Slotted Tip 

Dual Material................................................. 860 

Solid Handle.................................818-819,836-847 

Torx®..................................... 813,815,840,847,859 

Screw Extractors...........................................989,991 


Set...................................................................... 989 

Screw Starters.......................................826,848-849 

Scriber................................................................. 1239 

Seal and Pilot Bearing Puller............................. 1237 

Seal Puller...................................................1178,1237 

Seal Puller 

Oil-Seal Remover and Installer..........................1164 

Sensor & Sending Socket Set.................... 1157,1172 

Serpentine Belt Tool............................................1174 

Serpentine Belt Tool 

Grabber.............................................................1175 

Removal Set...................................................... 1174 

Stretch Tool....................................................... 1174 

Serrated Wrench..................................................1167 

Sets 

GMTK (General Mechanics Tool Kit).................54-55 

Hex Bit / Driver Sockets 

1/2" Drive.........................316,357-358,383-384 

Impact 

Hex Bit / Driver Sockets...................446,472-473 

Sockets.................................................. 504-505 

Socket Chrome 

Flex........................................... 214,232,267,293 

1/4" Drive...........................129-144,155,162-176 

3/8" Drive................................208-213,256-267 

1/2" Drive.................300-316,328-348,350-354 

Socket Impact...... 426-431,437,443-445,453,455- 

456,468-472,482,484-486,504-505 

Socket Impact 

1/4" Drive........................................426-431,437 

3/8" Drive........................ 443-445,447,453-457 

1/2" Drive........................ 468-472,482,484-486 

Sockets and Drive Tools 

Black Oxide.................................................... 259 

Wrenches 

Crowfoot.................................. 356,382,753-754 

Set-Up Wedges.....................................................1150 

Shackles, Screw Pin Anchor (Import)......1330-1331 

Shackles 

Anchor.....................................................1339-1343 

Chain................................................................ 1344 

Stainless Steel..........................................1340,1343 

Shears 

Carpet................................................................ 945 

Double Rounded................................................. 945 

Drapery.............................................................. 945 

Easy Snip............................................................ 944 

Fabric................................................................. 945 

Heavy Duty......................................................... 944 

High Leverage.............................................945,948 

Industrial.....................................................944,948 

Kitchen............................................................... 948 

Pinking............................................................... 946 

Poultry Processing.............................................. 948 

Rug Shears, Hooked Rugs.................................. 948 

Shop................................................................... 943 

Upholstery.......................................................... 945 

Sheaves, Manila Rope........................................ 1376 

Sheaves, Wire Rope............................................ 1376 

Short Circuit Detector..........................................1192 

Side Terminal Battery Wrench............................1188 

Slide Hammer.......................................................1140 

Slide Hammer Puller Set............................. 1139,1157 

Slings 

Drum.................................................................1410 

Snap Rings 

Assortment....................................................... 1238 

Snaps 

Die Cast Zinc.....................................................1321 

Malleable Iron and Steel.......................... 1319-1320 

Solid Bronze..................................................... 1322 

Spring, Aluminum..............................................1323 


Snips.......................................................932-938,949 

Snips 

All-Purpose Cutter.............................................. 935 

Aviation, Left, Right, and Straight................932-933 

Bulldog............................................................... 933 

Lightweight, Aluminum Handle........................... 938 

Long Cut............................................................. 936 

Multipurpose Snips............................................. 935 

Offset................................................................. 934 

Offset/Bent Pattern............................................ 937 

Pipe & Duct Cutting............................................ 935 

Repair Blades..................................................... 938 

Repair Springs.................................................... 934 

Special Series..................................................... 933 

Vertical....................................................... 934-935 

Socket Clips............................................................. 68 

Socket Rails...................................................67,81-82 

Sockets....... 138-143,150-154,172-176,185-192,208- 

213,227-231,256-267,281-292,309-316,322- 

325,341-355,368-380,388,395-397,400-403,411 

Sockets 

Flex, Chrome 

1/4" Drive.......................................................155 

3/8" Drive................................. 214,232,267,293 

1/2" Drive............................................... 355,381 

Hand, Black Oxide 

3/8" Drive........................................259,284,289 

1/2" Drive.................................349,355,374,379 

Hand, Chrome 

3/8" Drive............................................................ 

208-213,224,227-231,256-267,281-283,285- 

288,290-292 

1/2" Drive.........309-316,322-327,341-355,357- 

359,368-380,383-385 

Hex Driver................................................................. 

112-118,123-124,156-160,176-178,193-195,217- 

219,235-240,269-272,296-298,316,326-327,357- 

359,383-385 

Impact...............................................................426- 

437,441-445,447,449-450,452-457,460-478,480- 

487,490-499,501-505,507-513,515-519,521-524 

Impact 

1/4" Drive................................433-435,441-442 

3/8" Drive................449-450,460-462,464-466 

1/2" Drive................ 475-478,490-494,496-498 

3/4" Drive.................. 501-503,507-510,512-513 

1" Drive................................................... 515-518 

1-1/2" Drive............................................521-524 

Magnetic Power Self-Tapping Screws 

1/4" Drive...................................................... 439 

1420


3/8" Drive...................................................... 459 

Power...........................................439-440,459,489 

Power 

1/4" Drive.............................................. 439-440 

Sets.......................................................................... 

138-143,172-176,208-213,256-267,309-316,341- 

355,395-397 

Spark Plug................................... 224,292,380,1195 

Spark Plug 

3/8" Drive............................................... 224,292 

1/2" Drive...................................................... 380 

Torx® Tamper-Proof............................ 158-160,194 

Universal...........144,155,214,232,267,293,355,381 

Spanner Wrenches 

Adjustable Face.................................................. 762 

Adjustable Hook..........................................763-764 

Adjustable Pin.................................................... 764 

Face................................................................... 762 

Pin...................................................................... 763 

Spark Plug 

Gap Gauge............................................... 1072-1073 

Gap Wire Gauge........................................1073,1079 

Insert Reamer/Tap.............................................1194 

Magnetic.................................................. 1158,1195 

Service Set............................................... 1158,1195 

Sockets....................................... 224,292,380,1195 

Terminal Pliers............................................879,1193 

Thread Chaser..........................................1193-1194 

Thread Insert.....................................................1194 

Speeder Handles 

1/4" Drive............................................................182 

3/8" Drive.................................................... 225,279 

1/2" Drive.................................................... 319,365 

Spindle Nut 

Set............................................................ 1157,1220 

Socket...............................................................1221 

Wrench.................................................... 1220-1221 

Spindle Puller.......................................................1219 

Split Bearing Attachment....................................1140 

Square Drive Oil Filter Wrench........................... 1226 

Steel Rule 

Blacksmith's..................................................... 1068 

Steel Rules 

One-Piece........................................................ 1069 

School Shop..................................................... 1069 

Steering Service Set...................................1156,1231 

Steering Wheel 

Lock Plate Remover...........................................1231 

Puller Legs........................................................1231 

Stethoscope................................................1076,1162 

Straight Hose Clamp Pliers..........................879,1163 

Striking Wrenches.........................................758-761 

Stud Extractor..................................................... 1224 

Stud Removal 

Set............................................................1158,1222 

Sockets............................................................ 1223 

Stud Remover 

1/2" Drive........................................................... 366 

Surveying Tapes 

Chrome Clad®................................................. 1063 

Derrick............................................................. 1062 

Peerless........................................................... 1063 

Pro Series 

Steel Tapes.................................................. 1061 

Super Hi-Way®................................................ 1061 

Western®......................................................... 1062 

Swaging Tool....................................................... 1327 

Swivels 

Double Round Eye.............................................1318 

Forged......................................................1330,1357 

Forged 

Eye & Eye..................................................... 1356 

Jaw & Eye.................................................... 1357 

Open Eye...........................................................1317 

Swivoil Filter Wrench.......................................... 1224 

Synthetic Tapes 

Hi Line®........................................................... 1054 

T 

Tachometer, Hand Held...............................1076,1165 

Tap and Die.................................................... 983-988 

Tap and Die 

Ratcheting Wrench..................................... 986-988 

Sets............................................................ 983-986 

Tape Measures...........................................1042-1047 

Tape Measures 

Pocket Tapes...........................................1046-1047 

Pocket Tapes 

Chrome Clad®............................................. 1046 

Diameter.......................................................1047 

Pocket Scale.................................................1047 

ThinLine........................................................1047 

Power Return Tapes....................... 1042-1044,1046 

Power Return Tapes 

Auto-Lock.................................................... 1045 

Auto-Lock 

Magnetic End Hook.................................. 1045 


Power Tapes................................................ 1043 

Xtra-Wide Control Power Tape..................... 1044 

Xtra-Wide Power Tape................................. 1044 

Tappet Wrenches....................................735-736,743 

Technical Education Sets 

Auto..........................................................8,12,14-15 

Auto Body........................................................ 16-17 

Aviation........................................................... 20,22 

Diesel..........................................................11,18-19 

HVAC.....................................................................13 

Starter Set......................................................... 9-10 

T-Handles, Chrome..................................................... 

181,278,318,365,387,399,409-410 

T-Handles, Chrome 

1/4" Drive............................................................181 

3/8" Drive........................................................... 278 

1/2" Drive.................................................... 318,365 

3/4" Drive.................................................... 387,399 

1" Drive.............................................................. 409 

T-Handles 

ALLEN® Hex...............................................558-573 

Thermal Sensor....................................................1172 

Thimbles, Manila and Wire Rope..............1358-1359 

Thimbles 


Steel................................................................. 1329 

Thread Chaser 

Spark Plug.........................................................1193 

Thread Nippers...................................................... 947 

Thread Restorer Files........................................... 988 

Tie Rod End Puller and Pitman Arm Puller........ 1234 

Tie Rod Separator......................................1233-1234 

Tinner's Snips 

Bulldog Pattern................................................... 937 

Duckbill.............................................................. 937 

Straight Pattern.......................................... 936-937 

Tinner's Steel Circumference Rules.................. 1069 

Tire Chain 

Repair................................................................. 971 

Tire Tread and Brake Lining Gauge....................1216 

Tool Holder Magnetic.............................................. 68 

Tool Sets, Mechanics...90-105,119-122,125-137,161- 

172,196-207,241-255,299-308,328-341,386,389- 

394,404-408,413-415 

Tool Storage 

Cabinets 

Industrial Series..........................................69-73 

Professional Series.....................................75-76 

Standard Series.......................................... 77-79 

TEP Series..................................................64-66 

XL Series....................................................60-62 

Carts 

MCAT GMTK Cart............................................. 56 

XL Series....................................................62-63 

Chests 

Industrial Series..........................................69-72 

Professional Series..................................... 74-75 

Standard Series..........................................76-79 

TEP Series..................................................63-65 

XL Series....................................................60-61 

Hand Boxes & Bags.........................................66-67 

Torque Multiplier........................................... 800-802 

Torque Testers, Electronic................................... 803 

Torque Wrenches.......................................... 786-803 


Deflecting Beam...........................................787,794 

Dial..............................................................795-796 

Electronic.............................................787-788,793 

Electronic Torque Tester..................................... 803 

Micrometer Adjustable................. 786-787,789-793 

Multiplier.................................................... 800-802 

Pre-Set............................................................... 794 

Screwdriver........................................................ 797 

Trimmers 

Industrial, Straight.............................................. 946 

Truck and Tractor Oil Filter Wrench................... 1226 

Tubing Bender......................................................1214 

Tubing Cutter........................................................1214 

Tubing Service Set......................................1160,1212 

Turnbuckles 

Eye & Eye......................................................... 1364 

Hook & Eye....................................................... 1363 

Jaw & Eye......................................................... 1366 

Jaw & Jaw........................................................ 1365 

U 

Universal Joints 

Hand, Chrome 

1/4" Drive................................................ 147,182 

3/8" Drive............................................... 223,278 

1/2" Drive........................................318-319,366 

3/4" Drive...................................................... 399 

Impact 

1/4" Drive...................................................... 433 

3/8" Drive...............................................448,458 

1/2" Drive............................................... 475,488 

3/4" Drive...................................................... 505 

1" Drive...........................................................514 

1-1/2" Drive................................................... 520 

Universal Sockets / Flex Sockets 

Hand..................144,155,214,232,267,293,355,381 

Hand 

Sets.......................................... 144,214,267,355 

Impact...................................................................... 

431-432,435-436,447,452,454,457,463,467,473- 

474,480-481,483,487,495,499 

Impact 

Sets......431-432,447,454,457,473-474,483,487 

1/4" Drive................................431-432,435-436 

3/8" Drive........................................452,463,467 

1/2" Drive... 473-474,480-481,483,487,495,499 

Utility Knives..................................................941-943 

19 

I N D E X 

1421


I N D E X 19 

Utility Knives 

Auto-Retracting.................................................. 941 

Fixed Blade......................................................... 942 

Quick-Change..................................................... 941 

Retractable......................................................... 942 

Snap Knife.......................................................... 942 

Utility Blades...................................................... 943 

V 

Valve Grinder........................................................1183 

Valve Spring Compressor.......................... 1183-1184 

Vibro Engraver..................................................... 1239 

Vinyl Rolls...........................................................82-83 

Voltage Tester......................................................1190 

Vortex 

Sockets.......................................................416-421 

W 

Wedges 

Set-Up...............................................................1150 

Wheels, Measuring............................................. 1070 

Wheels, Measuring 

Pro Series..........................................................1070 

Wheel Weight Tool.............................................. 1222 

Window Molding Remover................................. 1203 

Wire Rope............................................................ 1303 

Wire Rope Clips, Malleable................................ 1329 

Wobble Extensions 

1/4" Drive.....................................................149,184 

3/8" Drive....................................................226,280 

1/2" Drive.................................................... 320,367 

Wood Rules.................................................1066-1068 

Wrenches.................215-216,233-234,268-269,294- 

295,356,382,579-782 

Wrenches 

Adjustable.................................... 769-775,777-782 

Angle, 15° & 80° Miniature................... 737-739,745 

Box................................................718-719,724-730 

Box 

15° Long...................................724-725,727-728 

45° Long..........................................726,729-730 

Chain.................................................................. 768 

Combination 

Black Oxide......................................700,708-709 

Extra Long.............................................. 691,694 

Flare Nut...................................269,294,751-752 

Flex Head................................................722-723 

Full Polish................................693-695,701-704 

Long.........................692-693,696-697,699-700 

Satin Finish......................................698,706-707 

Construction.................................................757,768 

Crowfoot................................................................... 

216,234,268-269,294-295,356,382,716-718,750- 

754 

Double Box Ratcheting.........................616-618,638 

E-Torx® Ratcheting............................................ 632 

Flare Nut...........................711-714,740-741,746-747 

Flex Combination Ratcheting.......................609-613 

Half-Moon Double Box Ratcheting.............. 629-630 

HVAC Ratcheting................................................ 733 

Indexing Ratcheting.....................................621-623 

Open End........................ 733-735,741-743,764-765 

Open End Ratcheting...................................623-625 

Pipe.................................................................... 766 

Ratcheting................................................................ 

215,233,579-647,710-711,714-716,731-733,748- 

749,776 

Ratcheting 

Box................... 628-629,632,637-639,643-646 

Combination.............585-597,635-637,642-643 

Combination, Reversible..600-606,634-635,641 

Flare Nut................................... 710-711,748-749 

GearBox Double Box...........................616-618 

QuadBox Double Box..........................625-627 

S-Shape Double Box.............................. 630-631 

Stubby Combination.......... 598-599,610,640,647 

Striking........................................................758-761 

Structural....................................................756-757 

Stubby Combination.................................... 702,705 

Stubby Flex Combination Ratcheting...........614-615 

Tappet, Double End..............................735-736,743 

Torque........................................................ 786-803 

XL Combination Ratcheting........................ 585-589 

XL GearBox Double Box Ratcheting.........616-620 

XL Locking Flex Combination Ratcheting.... 606-609 

XL Spline Combination Wrenches............... 620-621 

XL X-Beam Ratcheting............................ 579-584 

Y 

Yardstick 

Aluminum......................................................... 1069 

Z 

Zerk Fitting Tool..........................................1167,1236 

1422

P A R T N U M B E R I N D E X 

00001N.................................1007 

00024N.................................1007 

00047N.................................1007 

00070N.................................1007 

0090AC...................................953 

0090FC...................................954 

0090MC..................................953 

0090MNE................................954 

0120202...............................1272 

0120232...............................1272 

0120300...............................1273 

0120302...............................1272 

0120322...............................1272 

0120330...............................1273 

0120332...............................1272 

0120400...............................1273 

0120402...............................1272 

0120422...............................1272 

0120430...............................1273 

0120432...............................1272 

0120500...............................1273 

0120502...............................1272 

0120522...............................1272 

0120530...............................1273 

0120532...............................1272 

0120600...............................1273 

0120602...............................1272 

0120622...............................1272 

0120630...............................1273 

0120632...............................1272 

0120732...............................1272 

0120802...............................1272 

0120822...............................1272 

0120832...............................1272 

0121002...............................1272 

0121032...............................1272 

0121202...............................1272 

0121232................................1272 

0128102...............................1276 

0128132................................1276 

0128232...............................1276 

0128302...............................1276 

0128332...............................1276 

0128432...............................1276 

0129332...............................1276 

0129432...............................1276 

0129532...............................1276 

0129632...............................1276 

0140323...............................1273 

0140333...............................1273 

0140423...............................1273 

0140433...............................1273 

0140523...............................1273 

0140533...............................1273 

0140623...............................1273 

0140633...............................1273 

0140823...............................1273 

0143226............................... 1274 

0143326............................... 1274 

0143336............................... 1274 

0143426............................... 1274 

0143436............................... 1274 

0143516............................... 1274 

0143526............................... 1274 

0143536............................... 1274 

0143626............................... 1274 

0143636............................... 1274 

0150902...............................1277 

01765...................................1007 

0180412................................1277 

0180422...............................1277 

0180432...............................1277 

0180512................................1277 

0180522...............................1277 

0180532...............................1277 

0180612...............................1277 

0180632...............................1277 

0180812...............................1277 

0180832...............................1277 

0181012................................1277 

0181032...............................1277 

0181092...............................1279 

0181212................................1277 

0181413................................1278 

0181423................................1278 

0181513................................1278 

0181523................................1278 

0181613................................1278 

0181623...............................1278 

0184416...............................1278 

0184516...............................1278 

0184536...............................1278 

0184616...............................1278 

0184636...............................1278 

0187232...............................1279 

01888...................................1007 

01891...................................1007 

01894...................................1007 

0190AC...................................953 

0190CSP.................................959 

0190FC...................................954 

0190FCX.................................955 

0190MA..................................955 

0190MC..................................953 

0190MCK................................956 

0190MCS................................956 

0190MCX................................955 

0190ME..................................956 

0190MHC................................957 

0190MNE................................954 

0190MTN................................958 

0190MTQ................................958 

0190NSL.................................958 

0192411................................1284 

0192711................................1284 

0192911...............................1284 

0193111................................1284 

0193311................................1284 

01974....................................1007 

0200356...............................1275 

0213505...............................1304 

02144N.................................1007 

02145N.................................1007 

02147N.................................1007 

02215N.................................1008 

0222525...............................1305 

0222625...............................1305 

0222725...............................1305 

02228B.................................1007 

0222925...............................1305 

02229B.................................1007 

0223025...............................1305 

02230B.................................1007 

02244N.................................1008 

0226615...............................1305 

0226625...............................1305 

0231912...............................1307 

0231916...............................1307 

02373N.................................1019 

02375N.................................1019 

02884M................................1008 

02905M................................1008 

0290FC...................................954 

0290FCS.................................957 

0290FCX.................................955 

0290FHJ.................................958 

0290MC..................................953 

0290MCX................................955 

0290MLC................................965 

0290MNE................................954 

02926M................................1008 

0304024...............................1290 

0309526...............................1291 

0310124................................1285 

0310224...............................1285 

0310324...............................1285 

0310424...............................1285 

0311024................................1285 

0312014...............................1285 

0312024...............................1285 

0313024...............................1285 

0314024...............................1285 

0315014...............................1285 

0315024...............................1285 

0320214...............................1286 

0320224...............................1286 

0320324...............................1286 

0321024...............................1286 

0322014...............................1286 

0322026...............................1287 

0324024...............................1286 

0325034...............................1286 

0329500...............................1287 

0330124...............................1287 

0330126...............................1289 

0330224...............................1287 

0330324...............................1287 

0330424...............................1287 

0331024...............................1287 

0331026...............................1289 

0332023...............................1288 

0332024...............................1287 

0332426...............................1289 

0333024...............................1287 

0334024...............................1287 

0335024...............................1287 

0335026...............................1289 

0336015...............................1289 

03367N.................................1009 

0339626...............................1291 

03401N.................................1009 

0340324...............................1289 

03434N.................................1009 

03467N.................................1009 

03500N.................................1009 

03533N.................................1009 

03534N.................................1009 

03566N.................................1009 

03599N.................................1009 

03632N.................................1009 

03633N.................................1009 

03665N.................................1009 

03698N.................................1009 

03731N.................................1009 

03732N.................................1009 

03762N.................................1009 

03764N.................................1009 

03797N.................................1009 

03830N.................................1009 

03863N.................................1009 

03896N.................................1009 

0390CSP.................................959 

0390FC...................................954 

0390FCS.................................957 

0390FCX.................................955 

0390MA..................................955 

0390MC..................................953 

0390MCK................................956 

0390MCX................................955 

0390MHX................................957 

0390MLN................................965 

0390MNE................................954 

0390MTN................................958 

03929N.................................1009 

03980N.................................1009 

0400512...............................1283 

0401612...............................1283 

0402012...............................1283 

0405212...............................1284 

0405312...............................1284 

0405412...............................1284 

0405512...............................1284 

0405612...............................1284 

0405712...............................1284 

0405812...............................1284 

0406812...............................1280 

0407512...............................1280 

0407612...............................1280 

0407712...............................1280 

04695N.................................1010 

04729N.................................1010 

04762N.................................1010 

04795N.................................1010 

04798HN..............................1010 

04828N.................................1010 

04861N.................................1010 

04896N.................................1010 

04927N.................................1010 

04960N.................................1010 

04995N.................................1010 

05026N.................................1010 

05059N.................................1010 

05090N.................................1010 

05094N.................................1010 

0510410................................1281 

0510412................................1280 

0510413................................1281 

0510426...............................1282 

0510510................................1281 

0510512................................1280 

0510513................................1281 

0510526...............................1282 

0510610...............................1281 

0510612...............................1280 

0510613...............................1281 

0510626...............................1282 

0510712................................1280 

0510810...............................1281 

0510812................................1280 

05125N.................................1010 

0513571...............................1306 

0513572...............................1306 

0513574................................1306 

0513575...............................1306 

0513576...............................1306 

0513578...............................1307 

0513658...............................1306 

0513660...............................1306 

0513665...............................1306 

0513667...............................1306 

0513765...............................1306 

0514632...............................1282 

0514732...............................1282 

0514832...............................1282 

0514932...............................1282 

05158N.................................1010 

0516531...............................1282 

0516631...............................1282 

05190N.................................1010 

05194N.................................1010 

0520612...............................1283 

0520812...............................1283 

0521012...............................1283 

05225N.................................1010 

05258N.................................1010 

05307N.................................1010 

05652N................................. 1011 

05675N................................. 1011 

05738N................................. 1011 

05771N................................. 1011 

05804N................................. 1011 

05853N................................. 1011 

05886N................................. 1011 

0590MC..................................953 

0590MCX................................955 

0590MHX................................957 

0590MTN................................958 

0590RBJN..............................959 

05919N................................. 1011 

05968N................................. 1011 

06001NN.............................. 1011 

06034N................................. 1011 

06084N................................. 1011 

06117N................................. 1011 

06150N................................. 1011 

06198N................................. 1011 

062CMEN.............................1066 

0635211...............................1285 

0635311...............................1285 

06601N................................. 1011 

06602N................................. 1011 

06637N.................................1008 

06649N.................................1008 

06668N.................................1008 

06686N................................. 1011 

066FN...................................1066 

06704N.................................1015 

06706N.................................1015 

06711N.................................1012 

06742N.................................1012 

06773N.................................1012 

06804N.................................1012 

06836N.................................1012 

06867N.................................1012 

06898N.................................1012 

0690C.....................................961 

0690TN...................................960 

06930N.................................1012 

06961N.................................1012 

06992N.................................1012 

0702024...............................1309 

07023N.................................1012 

07054N.................................1012 

07085N.................................1012 

07090N.................................1012 

0710227...............................1300 

0710317...............................1299 

0710517................................1299 

0710717................................1299 

0711017................................1298 

0711077................................1298 

0711917................................1301 

0712017................................1299 

0712517................................1299 

0712577...............................1299 

0713027...............................1300 

0713117................................1299 

0713177................................1299 

0713187................................1299 

0713217................................1299 

0713277...............................1299 

0713627...............................1300 

0717017................................1299 

0719017...............................1299 

0719027...............................1299 

0720127...............................1295 

0720427...............................1295 

0720428...............................1298 

0721627...............................1296 

0721667...............................1296 

0721727...............................1296 

0722000...............................1298 

0722002...............................1298 

0722003...............................1298 

0722004...............................1298 

0722006...............................1298 

0722007...............................1298 

0722010...............................1298 

0722027...............................1295 

0722087...............................1295 

0722127...............................1275 

0722227...............................1275 

0722327...............................1275 

0722427...............................1292 

0722527...............................1286 

0722627...............................1295 

0722827...............................1288 

0722927...............................1290 

0722957...............................1290 

0723167...............................1290 

0723169...............................1291 

0723227...............................1295 

0723367...............................1286 

0723388...............................1286 

0723427...............................1292 

0723627...............................1288 

0723727...............................1298 

0723817...............................1293 

0724022...............................1296 

0724027...............................1296 

0724527...............................1288 

0724627...............................1295 

0725027...............................1275 

0726427...............................1295 

0726627...............................1286 

19 

I N D E X 

1423


I N D E X 19 

1424 

0726727...............................1286 

0726827...............................1288 

0740224...............................1292 

0740234...............................1292 

0740237...............................1292 

0741024................................1292 

0741034................................1292 

0741037................................1292 

0742024...............................1292 

0742034...............................1292 

0743024...............................1292 

0744024...............................1292 

0744027...............................1292 

0744037...............................1292 

0745024...............................1292 

0745037...............................1292 

0750124...............................1293 

0750224...............................1293 

0750227...............................1295 

0750324...............................1293 

0750424...............................1293 

0751034...............................1293 

0752023...............................1294 

0752024...............................1293 

0752034...............................1293 

0752426...............................1294 

0754034...............................1293 

0754126...............................1294 

0754326...............................1294 

0758034...............................1293 

0762024...............................1295 

07657N.................................1012 

07688N.................................1012 

07719N.................................1012 

07835N.................................1012 

07842N.................................1012 

07851N.................................1012 

07863N.................................1012 

07894N.................................1013 

07917N.................................1013 

07941N.................................1013 

07965N.................................1013 

0800824...............................1296 

0801024...............................1296 

0801224...............................1296 

0801424...............................1296 

0801624...............................1296 

08243N.................................1014 

08306N.................................1014 

08354N.................................1014 

08385N.................................1014 

08416N.................................1014 

08497N.................................1014 

08529N.................................1014 

08559N.................................1014 

08560N.................................1014 

08642N.................................1014 

08673N.................................1014 

08702N.................................1014 

08704N.................................1014 

0871014...............................1293 

0872014...............................1293 

08737N.................................1014 

08768N.................................1014 

08799N.................................1014 

0880844...............................1297 

08832N.................................1014 

08894N.................................1014 

0890824...............................1297 

0890827...............................1298 

0890844...............................1297 

0890CSJ.................................959 

08922N.................................1008 

0892524...............................1297 

0892527...............................1298 

08925N.................................1014 

0893524...............................1297 

0893527...............................1298 

0893544...............................1297 

0893574...............................1297 

0894024...............................1297 

0894074...............................1297 

0894524...............................1297 

0895024...............................1297 

0895314...............................1297 

0898014...............................1297 

09099N.................................1015 

09179N.................................1015 

09227N.................................1015 

09389N.................................1015 

09469N.................................1015 

0990646...............................1301 

0990647...............................1301 

0990836...............................1301 

0990837...............................1301 

0990846...............................1301 

0990847...............................1301 

0990856...............................1301 

0990857...............................1301 

0990T.....................................960 

100010DN...............................920 

100010VN...............................920 

100012VN...............................920 

10-004D.................................185 

10-005A.................................186 

10-005D.................................185 

10-006A.................................186 

10-006D.................................185 

10-007A..................................186 

10-007D.................................185 

10-008A.................................186 

10-008D.................................185 

10008VN.................................920 

10-009A.................................186 

10-009D.................................185 

10-010....................................185 

10-010AD...............................186 

10-011....................................185 

10-011AD...............................186 

10-012....................................185 

10-012A..................................186 

10-014....................................185 

10-014A..................................186 

10-016A..................................186 

10-016D.................................185 

10-018D..................................185 

1005505...............................1305 

100L.....................................1051 

10-106....................................185 

10-107....................................185 

10-108....................................185 

10-109....................................185 

10-110D..................................185 

10-111.....................................185 

10-112.....................................185 

10-114.....................................185 

10-116....................................185 

10-118D..................................185 

10-204....................................189 

10-205....................................189 

10-206....................................189 

10-206A..................................190 

10-207....................................189 

10-207A..................................190 

10-208....................................189 

10-208A..................................190 

10-209....................................189 

10-209A..................................190 

10-210....................................189 

10-210A..................................190 

10-211....................................189 

10-211A..................................190 

10-212....................................189 

10-212A..................................190 

10-214....................................189 

10-214A..................................190 

10-216....................................189 

10-216A..................................190 

10-218....................................189 

10-306....................................189 

10-307....................................189 

10-308....................................189 

10-309....................................189 

10-310....................................189 

10-311....................................189 

10-312....................................189 

10-314....................................189 

10-316....................................189 

10-318....................................189 

10336CVN..............................918 

10337CVN...............................918 

104.......................................1192 

10-406....................................192 

10-408....................................192 

10-410....................................192 

10-412....................................192 

10473...................................1192 

10627N.................................1033 

1066DMN.............................1067 

1066DN................................1067 

10-703....................................193 

10-704....................................193 

10-705....................................193 

10-706....................................193 

10-707....................................193 

10-708....................................193 

10-709....................................193 

10-710....................................193 

10-711....................................193 

10-712....................................193 

10-713....................................193 

10-714....................................193 

10-743....................................194 

10-744....................................194 

10-745....................................194 

10-746....................................194 

10-747....................................194 

10-748....................................194 

10-749....................................194 

10-750....................................194 

10-751....................................194 

10-752....................................194 

10-753....................................194 

10-754....................................194 

10799N.................................1019 

10-801....................................195 

10-802....................................195 

10-821....................................195 

10-822....................................195 

10-823....................................195 

10-868....................................194 

10-870....................................194 

10-872....................................194 

10-874....................................194 

10-876....................................194 

10-878....................................194 

10-880....................................194 

10-915....................................180 

10-915A..................................180 

10-918....................................181 

10-919A..................................183 

10-920....................................184 

10-921....................................183 

10-922....................................183 

10-922A.................................183 

10-923....................................183 

10-923A.................................183 

10-924....................................183 

10-925....................................183 

10-926....................................184 

10-927....................................184 

10-928....................................184 

10-929....................................183 

10-931....................................182 

10-935....................................182 

10-938....................................181 

10-943....................................181 

10-944....................................181 

10-945....................................181 

10-947....................................182 

10-952....................................182 

10-952A.................................182 

10-963....................................180 

10-967A..................................179 

10-968A.................................179 

10-972....................................178 

10-973....................................184 

10-974....................................184 

10-975....................................184 

10-979....................................183 

10-982....................................180 

10-983....................................180 

10-990....................................180 

10-992....................................179 

10-994....................................179 

10-996....................................180 

11-008D..................................281 

11-010D..................................281 

11-011D..................................281 

11-012D..................................281 

11-014D..................................281 

11-016D..................................281 

11-018D..................................281 

11-020D..................................281 

11-022....................................281 

11-024....................................281 

11-026D..................................281 

11-028D..................................281 

11-030....................................281 

11-032D..................................281 

1109D.....................................989 

11100....................................1064 

11-108.....................................281 

11-108A..................................283 

1110D......................................989 

11-110.....................................281 

11-110A...................................283 

11-111.....................................281 

11-112A...................................283 

11-112D...................................281 

11-114A...................................283 

11-114D..................................281 

11-116A...................................283 

11-116D..................................282 

11-118A...................................283 

11-118D..................................282 

11-119.....................................282 

1111D......................................989 

11-120.....................................282 

11-120A..................................283 

11-122.....................................282 

11-122A..................................283 

11-124.....................................282 

11-124A...................................283 

11-126.....................................282 

11-126A..................................283 

11-128.....................................282 

11-128A..................................283 

1112D......................................989 

11-130.....................................282 

11-132.....................................282 

1113DD...................................989 

1114D.................................... 1179 

1119D....................................1180 

11200....................................1064 

11-208D..................................287 

1120D...................................1180 

11-210D..................................287 

11-211.....................................287 

11-212....................................287 

11-214D..................................287 

11-216....................................287 

11-218....................................287 

1121D....................................1180 

11-220....................................287 

11-222D..................................287 

11-224....................................287 

11-226....................................287 

11-228....................................287 

1122D...................................1180 

11-230....................................287 

11-232....................................287 

1123D...................................1180 

1124D...................................1180 

1125D...................................1180 

11-308....................................287 

11-310....................................287 

11-311....................................287 

11-312....................................287 

11-312A..................................288 

11-314....................................287 

11-314A..................................288 

11-316....................................287 

11-316A..................................288 

11-318....................................287 

11-318A..................................288 

11-320....................................287 

11-320A..................................288 

11-322....................................287 

11-322A..................................288 

11-324....................................287 

11-324A..................................288 

11-326A..................................288 

11-326D..................................287 

11-328....................................287 

11-328A..................................288 

11-330....................................287 

11-332....................................287 

11400N.................................1087 

11402N.................................1087 

11403N.................................1087 

11405....................................1087 

11406....................................1087 

11407....................................1087 

11-408....................................292 

11-409....................................292 

1140D...................988,1223,1240 

11-410....................................292 

11-412....................................292 

11-414....................................292 

11414N..................................1087 

11415N..................................1087 

11-416....................................292 

11416N..................................1087 

11417N..................................1087 

11418....................................1088 

11-418....................................292 

11419....................................1088 

11-420....................................292 

11420N.................................1087 

11421....................................1085 

11422....................................1085 

11423....................................1086 

11426....................................1084 

11428....................................1084 

11429....................................1084 

11435....................................1089 

11436....................................1089 

11438....................................1089 

11439....................................1089 

11440....................................1089 

11442....................................1089 

11488N................................. 1011 

11491P..................................1085 

11492....................................1085 

11493....................................1086 

11494....................................1084 

11496....................................1084 

11497....................................1084 

11498....................................1084 

11499....................................1084 

11-501....................................292 

11502....................................1085 

11-504....................................292 

11-512D..................................293 

11-514....................................293 

11-516....................................293 

11-518....................................293 

11520....................................1084 

11-520....................................293 

11521....................................1084 

11522....................................1084 

11-522....................................293 

11524....................................1084 

11-524....................................293


11525P..................................1084 

11526N.................................1016 

11527....................................1090 

11528....................................1090 

11529NN...............................1090 

11530....................................1086 

11544P.................................1091 

11549....................................1090 

11554....................................1090 

11558....................................1091 

11559NN...............................1016 

11559P.................................1091 

11592NN...............................1016 

11637N.................................1016 

11649....................................1089 

11-708....................................296 

11-708A..................................296 

11-709....................................296 

11-709A..................................296 

11-710.....................................296 

11-710A..................................296 

11-711.....................................296 

11-711A...................................296 

11-712.....................................296 

11-712A..................................296 

11-713.....................................296 

11-713A..................................296 

11-714.....................................296 

11-714A..................................296 

11-715.....................................296 

11-715A..................................296 

11716N.................................1016 

11-748.....................................297 

11748N.................................1016 

11-750....................................297 

11-751....................................297 

11-752....................................297 

11-753....................................297 

11-754....................................297 

11-755....................................297 

11781N..................................1016 

11800B...................................975 

11-802....................................298 

11-803....................................298 

11-805....................................298 

11-821....................................298 

11-822....................................298 

11-825....................................298 

11-828....................................298 

11-842.............................294,752 

11-843.............................294,752 

11-844.............................294,752 

11-845.............................294,752 

11-846.............................294,752 

11-847.............................294,752 

11-848.............................294,752 

11-849.............................294,752 

11-850.............................294,751 

11-851.............................294,751 

11-852.............................294,751 

11-853.............................294,751 

11-854.............................294,751 

11-855.............................294,751 

11-856.............................294,751 

11-857.............................294,751 

11-858.............................294,751 

11-859.............................294,751 

11-860.............................294,751 

11-870....................................298 

11-872....................................298 

11-874....................................298 

11-876....................................298 

11-878D..................................298 

11-880....................................298 

11-882....................................298 

11-884....................................298 

11-886....................................298 

11-888....................................298 

11904....................................1016 

11-915....................................276 

11-915A..................................276 

11-918....................................277 

11-918A..................................277 

11-920....................................280 

11-921....................................279 

11-921A..................................279 

11-922....................................279 

11-922A..................................279 

11-923....................................279 

11-923A..................................279 

11-925....................................279 

11-925A..................................279 

11-927....................................279 

11-928....................................279 

11-929....................................279 

11-931....................................278 

11-934....................................281 

11-935....................................279 

11-935A..................................279 

11936....................................1016 

11-936....................................281 

11-937....................................281 

11-938....................................278 

11-939....................................281 

11-943....................................277 

11-945....................................276 

11-947....................................278 

11-951....................................278 

11-952....................................278 

11-952A..................................278 

11-953....................................280 

11-954....................................280 

11-955....................................280 

11-956....................................280 

11-957....................................280 

11-958....................................280 

11-959....................................280 

11-967A..................................275 

11969....................................1016 

11-972....................................273 

11-972A..................................275 

11-973....................................273 

11-974....................................273 

11-974A..................................275 

11-978....................................274 

11-979....................................274 

11-982....................................277 

11-990....................................277 

11-991....................................277 

11-992....................................274 

11-994....................................275 

11-996....................................276 

12-012....................................368 

12-014....................................368 

12-016....................................368 

12-018....................................368 

12019....................................1016 

12-020....................................368 

12-022D.................................368 

12-024....................................368 

12-026....................................368 

12-028D.................................368 

12-030D.................................368 

12-032D.................................368 

12-034....................................368 

12-036D.................................368 

12-038....................................368 

12-040D.................................368 

12-042D.................................368 

12-044....................................368 

12-046D.................................368 

12-048....................................369 

12051...................................1016 

12084...................................1016 

120P.....................................1051 

120TP...................................1051 

12-112A..................................370 

12-112D..................................369 

12-114.....................................369 

12-114A..................................370 

12-116A..................................370 

12-116D..................................369 

12-118A..................................370 

12-118D..................................369 

12-119.....................................369 

12-120....................................369 

12-120A..................................370 

12-121D..................................369 

12-122....................................369 

12-122A..................................370 

12-124.....................................369 

12-124A..................................370 

12-125....................................369 

12-126....................................369 

12-126A..................................370 

12-128....................................369 

12-128A..................................370 

12-130....................................369 

12-130A..................................370 

12131....................................1016 

12-132....................................369 

12-132A..................................370 

12134....................................1016 

12-134....................................369 

12-134A..................................370 

12-136A..................................370 

12-136D..................................369 

12-138D..................................369 

12-140....................................369 

12-140A..................................370 

12-142D..................................369 

12-144D..................................369 

12-146D..................................369 

12-148A..................................370 

12-148D..................................369 

12166....................................1016 

12199....................................1016 

12200...................................1064 

122050GR...............................417 

122060GR...............................417 

122070GR............................... 417 

122080GR...............................417 

122090GR...............................417 

122100GR...............................417 

12-212....................................375 

122120GR............................... 417 

12-214....................................375 

122140GR............................... 417 

12-216....................................375 

122160GR...............................417 

12-218....................................375 

122180GR............................... 417 

12-220....................................375 

12-222....................................375 

12-224....................................375 

12-226....................................375 

12-228D..................................375 

12-230D..................................375 

12-232....................................375 

12-234D..................................375 

12-236D..................................375 

12-238D..................................375 

12-240....................................375 

12-242....................................375 

12-244....................................375 

12-246D..................................375 

12248...................................1016 

12-248....................................375 

12-312....................................375 

12-314....................................375 

12-316....................................375 

12-316A..................................377 

12-318....................................375 

12-318A..................................377 

12-320....................................375 

12-320A..................................377 

12-322....................................375 

12-322A..................................377 

12-324....................................375 

12-324A..................................377 

12-326....................................375 

12-326A..................................377 

12-328....................................375 

12-328A..................................377 

12-330....................................375 

12-330A..................................377 

12-332....................................375 

12-332A..................................377 

12-334....................................375 

12-334A..................................377 

12-336....................................375 

12-336A..................................377 

12-338....................................375 

12-340....................................376 

12-342....................................376 

12-344....................................376 

12-346....................................376 

12-348....................................376 

12-348A..................................377 

12-410....................................380 

12-412....................................380 

12-414....................................380 

12-416....................................380 

12-418....................................380 

12-420....................................380 

12-422....................................380 

12-424....................................380 

12-426D.................................380 

12-428....................................380 

12-432....................................380 

124DD...................................1164 

12-504....................................380 

12-516....................................381 

12-518....................................381 

12-520D..................................381 

12-522....................................381 

12-524....................................381 

1260.....................................1069 

1261ME.................................1070 

12675...................................1190 

12678...................................1190 

126D.....................................1190 

12-713....................................383 

12-713A..................................383 

12-714....................................383 

12-714A..................................383 

12-715....................................383 

12-715A..................................383 

12-716....................................383 

12-716A..................................383 

12-717....................................383 

12-717A..................................383 

12-718....................................383 

12-718A..................................383 

12-719....................................383 

12-719A..................................383 

12-721....................................383 

12-753....................................384 

12-754D..................................384 

12-755....................................384 

12-757....................................384 

12-758....................................384 

12-759....................................384 

12790...................................1015 

12791...................................1250 

12-802....................................385 

12-803....................................385 

12-805....................................385 

12-821....................................385 

12-822....................................385 

12-825....................................385 

12-828....................................385 

12-840............................ 382,754 

12-841............................ 382,754 

12-842............................ 382,754 

12-843............................ 382,754 

12-844............................ 382,754 

12-845............................ 382,754 

12-846............................ 382,754 

12-847............................ 382,754 

12-848............................ 382,754 

12-849............................ 382,754 

12-850............................ 382,754 

12-851............................ 382,754 

12-852............................ 382,754 

12-853............................ 382,754 

12-854............................ 382,754 

12857...................................1015 

12-859............................ 382,754 

12-860............................ 382,754 

12-861............................ 382,754 

12-862............................ 382,754 

12-863............................ 382,754 

12-866............................ 382,754 

12-867............................ 382,754 

12-878....................................384 

12-880....................................384 

12-882....................................384 

12-884....................................384 

12-886....................................384 

12-888....................................384 

12-890....................................384 

12-892....................................383 

12-893....................................383 

12-907....................................364 

1290G.....................................961 

1290SF590...........................1058 

12-914A..................................365 

12-915....................................363 

12-916A..................................363 

12-917....................................365 

12-917A..................................365 

12-918....................................365 

12-918A..................................365 

12-920....................................367 

12-921....................................366 

12-923....................................366 

12-923A..................................366 

12-924....................................366 

12-924A..................................366 

12-927....................................366 

12-931....................................368 

12-935....................................365 

12-935A..................................365 

12-936....................................368 

12-937....................................368 

12-938....................................365 

12-939....................................368 

1293SF590...........................1058 

1293SM590..........................1058 

12-945....................................364 

12-947....................................366 

12-947A..................................366 

12-948....................................366 

12-951....................................366 

12-951A..................................366 

12-952....................................366 

12-963....................................364 

12967...................................1015 

12-967A..................................362 

12-972....................................360 

12-973....................................360 

12-974....................................360 

12-974A..................................362 

12-975A..................................362 

12-982....................................364 

12-983....................................364 

12-984....................................367 

12-985....................................367 

12-986....................................367 

12-987....................................367 

12-988....................................364 

12-989....................................367 

12-990....................................364 

12-991....................................364 

12-992....................................361 

12-994....................................361 

12-996....................................363 

129D.....................................1190 

13000N.................................1015 

13033...................................1015 

13081...................................1015 

13114....................................1015 

13-124....................................400 

13-126....................................400 

19 

I N D E X 

1425


I N D E X 19 

13-128....................................400 

13-130....................................400 

13-132....................................400 

13-134....................................400 

13-136....................................400 

13-138....................................400 

13-140....................................400 

13-142....................................400 

13-144....................................400 

13-146....................................400 

13147....................................1015 

13-148D..................................400 

13-150....................................400 

13-152....................................400 

13-154D..................................400 

13-156D..................................400 

13-158....................................400 

13-160....................................400 

13-164....................................400 

13-166....................................400 

13-168....................................400 

13-170....................................400 

13-172....................................400 

13-174.....................................400 

13-176D..................................400 

13196....................................1015 

132120GR...............................418 

132140GR...............................418 

132160GR...............................418 

132180GR...............................418 

132200GR...............................418 

132220GR...............................418 

132240GR...............................418 

132260GR...............................418 

132280GR...............................418 

13229...................................1015 

13234.....................................975 

13262...................................1015 

13266...................................1259 

13267...................................1259 

13268...................................1259 

13269...................................1259 

13310....................................1015 

13-328....................................402 

13-330....................................402 

13-332....................................402 

13-334....................................402 

13-336....................................402 

13-340....................................402 

13-342....................................402 

13343...................................1015 

13-344....................................402 

13-346....................................402 

13-348....................................402 

13-352....................................402 

13376...................................1015 

13425...................................1015 

135D.............................. 879,1193 

13692M................................1017 

13710M.................................1017 

13727M................................1017 

13772M................................1017 

13807M................................1017 

13811M.................................1017 

13814M.................................1017 

13841M.................................1017 

13875M................................1017 

13878M................................1017 

13908.....................................975 

1390L.....................................965 

1390PQ...................................960 

13918......................................975 

13-918....................................398 

13-922....................................399 

13-923....................................399 

13-925....................................399 

13930N.................................1017 

13934.....................................975 

13-938....................................399 

13-947....................................399 

13-947A..................................399 

13-951....................................399 

13-951A..................................399 

13-952....................................399 

13-972....................................397 

13-972A..................................398 

13-990....................................398 

14048M................................1016 

14106M.................................1017 

14-134.................................... 411 

14-136D.................................. 411 

14139M.................................1017 

14-140D.................................. 411 

14-142.................................... 411 

14-144.................................... 411 

14-146.................................... 411 

14-148.................................... 411 

14-152.................................... 411 

14-154.................................... 411 

14-156.................................... 411 

14-158.................................... 411 

14-160.................................... 411 

14162M.................................1017 

14-164D.................................. 411 

14-168.................................... 411 

14-170.................................... 411 

14-172.................................... 411 

14-176.................................... 411 

14-180.................................... 411 

14-182.................................... 411 

14-184.................................... 411 

14-188.................................... 411 

14-194.................................... 411 

14-196.................................... 411 

14-200.................................... 411 

14-212.................................... 411 

142200GR...............................419 

142220GR...............................419 

142240GR...............................419 

14224M................................1017 

142260GR...............................419 

142280GR...............................419 

142300GR...............................419 

142320GR...............................419 

142340GR...............................419 

142360GR...............................419 

142380GR...............................419 

14255M................................1017 

14273D.................................1258 

14290M................................1017 

14341N.................................1017 

14442...................................1245 

14445...................................1245 

14451...................................1245 

145................................880,1162 

14547M................................1018 

14599M................................1018 

14600N.................................1018 

14665M................................1018 

14696N.................................1018 

14698N.................................1018 

14729N.................................1018 

14-906....................................408 

1490AC...................................953 

1490MAF................................955 

1490MC..................................953 

1490MNE................................954 

1490MTN................................958 

14-918....................................409 

14-924....................................410 

14-926....................................410 

14-938....................................409 

14-939....................................410 

14-940....................................410 

14942M................................1018 

14946...................................1247 

14947...................................1247 

14-951....................................410 

14-966....................................409 

14992M................................1018 

15-000................................ 24-29 

15-001................................ 24-29 

15-005................................ 31-34 

15-006D............................. 31-34 

15-010................................36-39 

15-011................................36-39 

15-015................................ 41-43 

15-016................................ 41-43 

15-017................................ 41-43 

15024N.................................1018 

15-025......................................49 

15-026D...................................49 

15-027D...................................49 

15-035D.............................44-45 

15-036D.............................44-45 

15-037D.............................44-45 

15-055................................50-51 

15-056................................50-51 

15056N.................................1018 

15-057................................50-51 

15-075......................................53 

15-076......................................53 

15087N.................................1018 

150MM.................................1059 

15-199....................................161 

15-205....................................162 

15-210....................................165 

15-215....................................164 

15-220....................................167 

15-225....................................169 

15-230....................................172 

15-235....................................171 

15-240....................................173 

15-245....................................172 

15-246A..................................170 

15-247A..................................170 

15-248A..................................166 

15-249A..................................173 

15-250....................................175 

15-255....................................175 

15-260....................................177 

15-265....................................176 

15-270....................................178 

15-299............................ 243-244 

15-300.............................241-242 

15-305.............................241-242 

15-310............................ 242-243 

15-315............................ 242-243 

15-321A..................................255 

15-322A..................................250 

15-323A..................................121 

15-324A..................................258 

15-325....................................249 

15-326A..................................261 

15-330....................................248 

15-335....................................122 

15-340....................................253 

15-345....................................255 

15-350....................................254 

15-355....................................257 

15-360....................................256 

15-361....................................256 

15-365....................................258 

15-370....................................257 

15-375....................................260 

15-380....................................259 

15-385....................................261 

15-390....................................260 

15-395....................................262 

15-399............................329-330 

15-400....................................267 

15-405............................ 268,750 

15-415.............................269,751 

15-425....................................270 

15-430....................................123 

15-435....................................123 

15-440....................................269 

15-445....................................271 

15-450....................................272 

15-455....................................272 

15-500............................328-329 

15-505............................328-329 

15-510....................................331 

15-517A..................................334 

15-518A..................................339 

15-519A..................................340 

15-520....................................333 

15-521A..................................345 

15-522A..................................348 

15-523A..................................341 

15-524A...........................119-120 

15-525....................................337 

15-530....................................336 

15-535....................................338 

15-540....................................340 

15-545....................................342 

15-550....................................341 

15-555....................................345 

15-560....................................343 

15-561....................................344 

15-565....................................346 

15-570....................................346 

15-575....................................347 

15-580....................................347 

15-585....................................348 

15-590....................................355 

15-595............................ 356,753 

15-600............................ 356,753 

15-605....................................357 

15-610....................................357 

15-615....................................359 

15-620....................................359 

15-700....................................390 

15-705....................................391 

1570B.....................................947 

15-710....................................393 

15-715....................................394 

1571B.....................................947 

15-735....................................396 

15-740....................................397 

15-800....................................406 

15-805....................................407 

15-810....................................408 

15925N.................................1019 

15958N.................................1019 

15991N.................................1019 

16-001......................................74 

16-002......................................74 

16-005......................................74 

16-006......................................74 

16036N.................................1019 

16069N.................................1019 

16-091......................................74 

16-092......................................74 

16-093......................................74 

16102N.................................1019 

16147N.................................1019 

16180N.................................1019 

161D.....................................1071 

16213N.................................1019 

162D.....................................1071 

163D.....................................1072 

164.......................................1072 

165.......................................1073 

16507N.................................1020 

16540N.................................1020 

16573N.................................1020 

166.........................................946 

16-600......................................81 

16-601......................................84 

16-603......................................80 

16-604......................................84 

16-605......................................80 

16-606......................................84 

16-607......................................80 

16-609......................................78 

16-613......................................84 

16-615......................................84 

16-621......................................84 

16-622......................................71 

16-623......................................84 

16-625......................................73 

16-626......................................73 

16-629......................................84 

16-635......................................84 

16-641......................................84 

16-649......................................84 

16-651......................................84 

16-653......................................84 

16-657......................................84 

16-659......................................84 

16663N.................................1020 

16-691......................................84 

16-695......................................84 

16696N.................................1020 

166D.....................................1073 

16729N.................................1020 

16761N.................................1020 

16-790......................................69 

16794N.................................1020 

16-810......................................74 

16-811......................................75 

16-820......................................76 

16-825......................................77 

16-826......................................79 

16827N.................................1020 

16-831......................................82 

16-832......................................82 

16-834......................................82 

16-835......................................82 

16-836......................................81 

16-837......................................81 

16-838......................................81 

16-839......................................81 

16-841......................................82 

16-843......................................82 

16-844......................................81 

16-845......................................82 

16-846......................................81 

16-847D...................................82 

16-848......................................81 

16-874......................................72 

16-876......................................70 

16-888......................................69 

16-910......................................75 

16-911......................................76 

16-920......................................77 

16-925......................................78 

16-926......................................79 

16-984......................................72 

16-986D...................................71 

16-988......................................70 

1707......................................1054 

1708DD.................................1224 

1715D.....................................882 

1720D...................................1180 

172271................................. 1181 

1722D................................... 1181 

1723D...................................1180 

1724......................................1180 

17505N.................................1020 

175E........................................949 

175E5.....................................949 

175E5V...................................949 

17615N.................................1021 

17683N.................................1021 

17751N.................................1021 

178089...................................973 

1780A.....................................972 

1780CDX.................................972 

1780PQ...................................973 

1780T.....................................974 

1780TA...................................974 

1780TC...................................973 

1780TG...................................974 

1780TN...................................972 

17873N.................................1022 

17903N.................................1022 

179089...................................969 

1790CDX.................................969 

1790PQ...................................970 

1790T.....................................970 

1790TA...................................971 

1790TC...................................970 

1790TG...................................971 

1426


I N D E X 

19 

1427 

1790TN...................................969 

17910N.................................1022 

18-006....................................439 

18-007....................................439 

18-008D.................................439 

18-009....................................439 

18-010....................................439 

18-011....................................439 

18-012....................................439 

18-014....................................439 

18-016....................................439 

18035N.................................1022 

18057N.................................1022 

18-076....................................439 

18-078....................................439 

18-080....................................439 

18-081....................................439 

18-082....................................439 

18-084....................................439 

18-086....................................439 

18130N.................................1022 

18153N.................................1022 

18155N.................................1022 

18-206....................................440 

18-208....................................440 

18-209....................................440 

18-210D..................................440 

18-211....................................440 

18-212....................................440 

18-214....................................440 

18-216....................................440 

18-606....................................441 

18-607....................................441 

18-608....................................441 

18-609....................................441 

18-610....................................441 

18-611....................................441 

18-612....................................441 

18-614....................................441 

18-616....................................441 

18617N.................................1023 

18-618....................................441 

18-620....................................441 

18846N.................................1021 

18861N.................................1021 

18-890....................................437 

18-921....................................438 

18-923....................................438 

18924N.................................1021 

18-935....................................438 

18-936....................................438 

18-937....................................438 

18-938....................................438 

18-939....................................438 

18-940....................................438 

18960N.................................1021 

18962N.................................1021 

18-972....................................178 

190.......................................1225 

19013N.................................1021 

19-080....................................459 

19-082....................................459 

19-084....................................459 

19-086....................................459 

19-088....................................459 

191........................................1225 

19-108....................................284 

19-110.....................................284 

19-112.....................................284 

19-114.....................................284 

19-116.....................................284 

19-118.....................................284 

19-120....................................284 

19-122....................................284 

19-124....................................284 

19-126....................................284 

19-128....................................284 

19-130....................................284 

19-132....................................284 

19136N.................................1023 

19-150....................................259 

192........................................1225 

19-308....................................289 

19-310....................................289 

19-312....................................289 

19-314....................................289 

19-316....................................289 

19-318....................................289 

19-320....................................289 

19-322....................................289 

19-324....................................289 

19-326....................................289 

19-328....................................289 

19-330....................................289 

19-332....................................289 

193410CVN.............................921 

193410VN...............................921 

193610CVSMN.......................921 

193610VN...............................921 

19394N.................................1023 

19-408....................................462 

19-414....................................462 

19-416....................................462 

19-418....................................462 

19427N.................................1023 

19460N.................................1023 

19493N.................................1023 

19507CVN...............................919 

19508CVN..............................919 

19-512....................................293 

19-514....................................293 

19-516....................................293 

19-518....................................293 

19-520....................................293 

19-522....................................293 

19-524....................................293 

19-562....................................463 

19-564....................................463 

19-566....................................463 

19-568....................................463 

19-570....................................463 

19-572....................................463 

19-574....................................463 

19-608....................................460 

19-610....................................460 

19-611....................................460 

19-612....................................460 

19-614....................................460 

19-616....................................460 

19-618....................................460 

19-620....................................460 

19-622....................................460 

19-624....................................460 

19-626....................................460 

19-628....................................460 

19-630....................................460 

19-632....................................460 

19-708....................................461 

19-709....................................461 

19-710....................................461 

19-711....................................461 

19-712....................................461 

19-714....................................461 

19-716....................................461 

19-718....................................461 

19-720....................................461 

19-722....................................461 

19-724....................................461 

19-726....................................461 

19-728....................................461 

19-730....................................461 

19-732....................................461 

19-810....................................462 

19-812....................................462 

19-814....................................462 

19-816....................................462 

19-818....................................462 

19-820....................................462 

19-822....................................462 

19-824....................................462 

19-826....................................462 

19-828....................................462 

19-830....................................462 

19-832....................................462 

19846...................................1023 

19875...................................1023 

19-890....................................453 

19-894....................................454 

19-895....................................453 

19-918....................................277 

19-922....................................458 

19-923....................................458 

19-935....................................458 

19-936....................................458 

19-937....................................458 

19-940....................................457 

19-947....................................458 

19-952....................................459 

19-952A.................................459 

19-972....................................274 

1DSN.......................................948 

20-012....................................490 

20-014....................................490 

20-016....................................490 

20-018....................................490 

20-020...................................490 

20-022...................................490 

20-024....................................490 

20-026...................................490 

20-028D.................................490 

20-030...................................490 

20-032...................................490 

20-034D.................................490 

20-036D.................................490 

20-038...................................490 

20-040...................................490 

20-042...................................490 

20-044D.................................490 

20-046D.................................490 

20-048D.................................490 

2004D................................... 1215 

2006.......................................862 

20-082...................................489 

20-084...................................489 

20-086...................................489 

20-088...................................489 

2008MR..................................862 

2010.......................................861 

2010D...................................1226 

20-112....................................374 

2011295...............................1305 

20-114....................................374 

2011495...............................1305 

20-116....................................374 

2011695...............................1305 

20-118....................................374 

20-120D..................................374 

20-122D..................................374 

20-124D..................................374 

20-126D..................................374 

20-128....................................374 

2012D.....................................881 

20-130D..................................374 

20-132....................................374 

20-134D..................................374 

20-136....................................374 

20138N.................................1030 

20-140D..................................374 

20-142D..................................374 

20-144....................................374 

20-146D..................................374 

20-148....................................374 

20189N.................................1030 

201D..................................... 1189 

20205N.................................1030 

20-212....................................491 

20-214....................................491 

20-216....................................491 

20-218....................................491 

20-220....................................491 

20-222....................................491 

20-224....................................491 

20-226....................................491 

20-228....................................491 

20-230....................................491 

20-232....................................491 

20-234....................................491 

20-236....................................491 

20-238....................................491 

20239N.................................1030 

20-240....................................491 

20-242....................................491 

20-244....................................491 

20-246....................................491 

20-248....................................491 

20291N.................................1030 

2029DD................................1226 

202D.....................................1188 

20-312....................................379 

20-314....................................379 

20-316D.................................379 

20-318....................................379 

203182D...............................1185 

2031DD.................................1185 

20-320....................................379 

20-322....................................379 

20-324....................................379 

20-326....................................379 

20-328....................................379 

20-330....................................379 

20-332D.................................379 

20-334D.................................379 

20-336D.................................379 

20-340...................................379 

20342N.................................1030 

2037DD................................1203 

2038D...................................1203 

20393N.................................1030 

203D.............................. 878,1188 

20-412D..................................492 

20-414....................................492 

20-416....................................492 

20-418....................................492 

20-420....................................492 

20-422....................................492 

20-424....................................492 

20-426....................................492 

20-428....................................492 

20-430...................................492 

20-432...................................492 

20-434...................................492 

20-436...................................492 

20479N.................................1031 

20496N.................................1031 

204D.....................................1188 

20509CVSMLN.......................919 

20509IVN...............................919 

20509N...................................919 

20509WSCVSMLN..................920 

20-516....................................381 

20-518....................................381 

20-520D.................................381 

20-522....................................381 

20-524....................................381 

20547N.................................1031 

20-564D.................................495 

20-566...................................495 

20-568...................................495 

20-570....................................495 

20-572....................................495 

20-574....................................495 

20-576....................................495 

20-578....................................495 

20-580...................................495 

20-582....................................495 

20582N.................................1031 

205D.....................................1190 

20-612D.................................494 

20-614....................................494 

20-616....................................494 

20-618....................................494 

20-620...................................494 

20-622...................................494 

20-624....................................494 

20-626...................................494 

20-628...................................494 

2062D...................................1071 

20-630...................................494 

20-632...................................494 

20-634...................................494 

20-636...................................494 

20-638...................................494 

20-640...................................494 

20-642...................................494 

20-644...................................494 

20-646...................................494 

20-648...................................494 

20-650...................................349 

20-660...................................355 

206D..................................... 1189 

20-712....................................492 

20-714....................................492 

20-716....................................492 

20-718....................................492 

2071D...................................1185 

20-720....................................492 

20-722....................................492 

20-724....................................492 

20-726D.................................492 

20-728....................................492 

20-730....................................492 

2078D...................................1184 

20-812....................................493 

20-814D.................................493 

20-816....................................493 

20-818....................................493 

20-820D.................................493 

20-822....................................493 

20-824....................................493 

20-826....................................493 

20-828....................................493 

20-830...................................493 

20-832...................................493 

20-834...................................493 

20-836...................................493 

20-838D.................................493 

20-840...................................493 

20-842...................................493 

20-844...................................493 

20-846D.................................493 

20-848...................................493 

20868.....................................980 

20-889...................................482 

20-891A..................................485 

20-893...................................484 

20-894...................................484 

20-895A.................................485 

20-897D.................................482 

20-899D.................................483 

20-918....................................365 

20-922A.................................488 

20-923A.................................488 

20-923D.................................488 

20-924D.................................488 

20-935D.................................488 

20-936D.................................488 

20-937D.................................488 

20-940...................................487 

20-947D.................................488 

20-951A..................................489 

20-951D.................................489 

20-952A.................................489 

20-952D.................................489 

20-953D.................................489 

20-959D.................................489 

20-966D.................................364 

20-972D.................................361 

20-973A.................................362 

20-996D.................................489 

21-016....................................507 

21016N.................................1032 

21-018D..................................507 

21-020....................................507 

21-022D.................................507 

21-024D.................................507


I N D E X 19 

1428 

21-026....................................507 

21-028....................................507 

21-030D.................................507 

21-032....................................507 

21-034....................................507 

21-036....................................507 

21-038D.................................507 

21-040....................................507 

21-042D.................................507 

21-044....................................507 

21-046....................................507 

21-048....................................507 

21-050....................................507 

21-052....................................507 

21-054....................................507 

21-056....................................507 

21-058D.................................507 

2106.....................................1204 

21-060....................................507 

21-062D.................................507 

21-064....................................507 

21-066....................................507 

21067N.................................1032 

21-068....................................507 

21-070....................................507 

21-072....................................507 

21-076D.................................507 

2107D................................... 1214 

21-118D..................................510 

21118N..................................1032 

21-120D..................................510 

21-122D..................................510 

21-124D..................................510 

21-126....................................510 

21-128....................................510 

21-130....................................510 

21-132....................................510 

21-134....................................510 

21-136....................................510 

21-138....................................510 

21-140....................................510 

21-142....................................510 

21-144D..................................510 

21-146....................................510 

21-148....................................510 

21-150D..................................510 

21-152....................................510 

21-154....................................510 

21-156....................................510 

21-158....................................510 

21-160....................................510 

21-162....................................510 

21-164D..................................510 

21-166....................................510 

21-168D..................................510 

21169N.................................1032 

2116D...................................1216 

21-170D..................................510 

21-172D..................................510 

21-176....................................510 

21-218....................................508 

21-220....................................508 

21-222....................................508 

21-224....................................508 

21-226....................................508 

21-228....................................508 

21-230....................................508 

21-232....................................508 

21-234....................................508 

21-236....................................508 

21-238....................................508 

2123D...................................1194 

21-240....................................508 

21-242....................................508 

21-244....................................508 

21-246....................................508 

21-248....................................508 

21-250....................................508 

21-252....................................508 

21-254....................................508 

21-256....................................508 

21-258....................................508 

2125D...................................1194 

21-260....................................508 

21-262....................................508 

21-264....................................508 

2126D...................................1194 

21272N.................................1032 

2127D...................................1194 

2128D...................................1194 

2129DD.................................1194 

21-420....................................509 

21-422....................................509 

21424......................................863 

21-424....................................509 

21426.....................................863 

21-426....................................509 

21-428....................................509 

21-430....................................509 

214310....................................863 

214312....................................863 

21-432....................................509 

21433.....................................863 

21434.....................................863 

21-434....................................509 

21436.....................................863 

21-436....................................509 

21438.....................................863 

21-438....................................509 

21-440....................................509 

21-442....................................509 

21-446....................................509 

21455...................................1032 

21458...................................1032 

21467...................................1032 

21470N.................................1034 

21471N.................................1034 

21474....................................1034 

21474H.................................1033 

21476N.................................1034 

21484...................................1033 

21485N.................................1034 

21493...................................1033 

21494N.................................1034 

21502...................................1033 

21503N.................................1034 

21-505.................................... 511 

21508CVN...............................920 

21511N..................................1034 

21512....................................1033 

21513....................................1033 

21514....................................1033 

21515....................................1033 

21516....................................1033 

21520N.................................1034 

21522N.................................1034 

21524N.................................1034 

21526N.................................1034 

21528N.................................1034 

2153D...................................1193 

2162D............................ 879,1193 

21667N.................................1032 

21687HN...............................1014 

21687N.................................1014 

21694HN...............................1014 

21694N.................................1014 

21701HN...............................1014 

21701N.................................1014 

21708N.................................1016 

21715....................................1016 

21-718.................................... 511 

21-719.................................... 511 

21-721.................................... 511 

21-723.................................... 511 

21-725.................................... 511 

21729HN...............................1017 

21729N.................................1017 

21736N.................................1018 

2173DD................................. 1189 

21743N.................................1018 

21745HN...............................1010 

21745N.................................1010 

21746HN...............................1010 

21748HN...............................1009 

21755N.................................1017 

21825N.................................1014 

21832N.................................1014 

21839N.................................1014 

21842HN...............................1014 

21842N.................................1014 

21846N.................................1016 

21853...................................1016 

21854...................................1016 

21857N.................................1010 

21858N.................................1010 

21860N.................................1021 

21862N.................................1009 

21866N.................................1017 

21867N.................................1009 

21868HN...............................1009 

21868N.................................1009 

21870N.................................1021 

21873N.................................1018 

21874N.................................1018 

21875N.................................1018 

21878N.................................1023 

2187D...................................1225 

21881N.................................1010 

21-893....................................504 

21-899....................................504 

2189D................................... 1214 

21-918....................................398 

21-923....................................505 

21-924....................................505 

21-925....................................505 

21-947....................................505 

21-951....................................506 

21-952....................................506 

21-953....................................506 

21-962....................................506 

21-963....................................506 

21-964....................................506 

21-965....................................506 

21-967....................................506 

21-972....................................397 

22015HNN............................1003 

22015NN...............................1005 

22017NN...............................1005 

22018HN...............................1002 

22-024D.................................515 

22024NN..............................1004 

22025NN..............................1003 

22-026....................................515 

22-028....................................515 

22-030....................................515 

22030HNN............................1002 

22030NN..............................1003 

22-032D.................................515 

22-034....................................515 

22-036D.................................515 

22-038D.................................515 

22-040D.................................515 

22040HNN............................1002 

22040NN..............................1004 

22-042....................................515 

22-044...................................515 

22-046...................................515 

22-048...................................515 

22-050....................................515 

22-052....................................515 

22-054D.................................515 

22-056....................................516 

22-058D.................................516 

22-060D.................................516 

22-062....................................516 

22062NN..............................1004 

22-064...................................516 

22-066...................................516 

22-068...................................516 

22-070....................................516 

22-072....................................516 

22-074....................................516 

22-076....................................516 

22-078....................................516 

22-080....................................516 

22-082....................................516 

22-084...................................516 

22-086....................................516 

22-088....................................516 

22-090...................................516 

22-092D.................................516 

22-094D.................................516 

22-096...................................516 

22-100....................................516 

22-104D..................................516 

221060GR...............................422 

22-108....................................516 

221080GR...............................422 

22-112D..................................516 

22-116D..................................516 

22-118....................................516 

22-120D..................................516 

22-122D..................................516 

22-124....................................516 

22-126....................................516 

222273.................................1209 

222276.................................1209 

22-228D.................................517 

22-230....................................517 

22-232....................................517 

22-234....................................517 

22-236....................................517 

22-238D.................................517 

2223D...................................1072 

22-240D.................................517 

22-242D..................................517 

22-244D.................................517 

22-246D.................................517 

22-248....................................517 

22-250....................................517 

22-252....................................517 

22-254....................................517 

22-256....................................517 

22-258D.................................517 

22-260D.................................517 

22-262D.................................517 

22-264....................................517 

22-266....................................517 

22-268....................................517 

22-270D.................................517 

22-272D.................................517 

22-274D..................................517 

22-276....................................517 

22-282D.................................517 

22-288D.................................517 

2228D.....................................988 

2229D.....................................988 

22-424....................................518 

22-426....................................518 

22-428....................................518 

22-430....................................518 

224310...................................863 

22-432....................................518 

22433.....................................863 

22434.....................................863 

22436.....................................863 

22-436....................................518 

22438.....................................863 

2245.......................................865 

2249D.....................................988 

22-505....................................519 

2270.....................................1164 

2274D...................................1071 

2279DD................................ 1189 

2282D.....................................826 

2283.......................................826 

2284D................................... 1181 

228675................................. 1179 

228677................................. 1179 

2286D................................... 1179 

2287D...................................1233 

2288D...................................1234 

2289D...................................1235 

22-906....................................409 

229070.................................1203 

229076.................................1203 

2290D...................................1203 

22-923....................................514 

22-925....................................514 

22-947....................................514 

22-951....................................514 

22-952....................................514 

22-962....................................515 

22-963....................................515 

22-964....................................514 

22-965....................................514 

23-044...................................521 

23-046...................................521 

23-048...................................521 

2304D................................... 1167 

23-050...................................521 

23-052....................................521 

23-054...................................521 

23-056...................................521 

23-058...................................521 

2305D................................... 1167 

23-060D.................................521 

23-062...................................521 

23-064...................................521 

23-066...................................521 

23-068...................................521 

2306D................................... 1167 

23-070....................................521 

23-072....................................521 

23-074....................................521 

23-076....................................521 

23-078....................................522 

23-080...................................522 

23-082....................................522 

23-084...................................522 

23-086...................................522 

23-088...................................522 

23-090...................................522 

23-092...................................522 

23-094...................................522 

23-096...................................522 

23-098...................................522 

2309D................................... 1187 

23-100....................................522 

23-102....................................522 

23-104....................................522 

23-106....................................522 

231060GR...............................422 

231061GR...............................421 

231062GR...............................421 

23-108....................................522 

231080GR...............................422 

2310D...................................1186 

23-110....................................522 

23-112....................................522 

23-114....................................522 

23-116....................................522 

23-118....................................522 

2311D................................... 1187 

23-120....................................522 

23-122....................................522 

23-124....................................522 

23-126....................................522 

23-128....................................522 

2312DD.................................1186 

23-130....................................522 

23-132....................................522 

23-134....................................522 

23-136....................................522 

23-138....................................522 

2313D...................................1186 

23-140....................................522 

23-142....................................522 

23-144....................................522 

23-148....................................522 

2314D...................................1186 

23-152....................................522 

23-160....................................522 

2320D...................................1229 

2320W..................................1228


2321.....................................1229 

2321W..................................1228 

2322D...................................1229 

2322W..................................1228 

23-244....................................523 

23-246....................................523 

23-248....................................523 

2324D...................................1216 

23-252....................................523 

23-254....................................523 

23-256....................................523 

23-258....................................523 

23-260....................................523 

23-264....................................523 

23-266....................................523 

23-268....................................523 

2326D...................................1216 

23-270....................................523 

23-272....................................523 

23-274....................................523 

23-276....................................523 

23-278....................................523 

2327D...................................1073 

23-280....................................523 

23-282....................................523 

23-284....................................523 

23-286....................................523 

23-288....................................523 

23-290....................................523 

23-292....................................523 

23-294....................................523 

23-296....................................523 

23-298....................................523 

23-300....................................523 

23-302....................................523 

23-304....................................523 

23-306....................................523 

23-308....................................523 

23-310....................................523 

23-312....................................523 

23-314....................................523 

23-316....................................523 

23-318....................................524 

23-320....................................524 

23-322....................................524 

23-324....................................524 

23-326....................................524 

23-328....................................524 

23-330....................................524 

23-332....................................524 

23-334....................................524 

23-336....................................524 

23-338....................................524 

23-340....................................524 

23-344....................................524 

23-348....................................524 

23-352....................................524 

2343114.................................864 

234312...................................863 

23434.....................................863 

23436.....................................863 

23438.....................................863 

23628.....................................980 

23638.....................................980 

23859N.................................1023 

23861...................................1007 

238978................................. 1181 

2389D................................... 1181 

23-906................................... 412 

2391.....................................1077 

23-924....................................520 

23-928....................................520 

23-947....................................520 

23-951....................................520 

23-962....................................521 

23-963...................................521 

23-964...................................520 

23-966................................... 412 

2398D...................................1236 

24016.....................................864 

241062GR...............................421 

241080GR...............................422 

2419D.....................................989 

242....................................... 1187 

2420D...................................1237 

2423D...................................1192 

2424D...................................1072 

2425D................................... 1167 

2426D................................... 1167 

242875.................................1165 

2428D...................................1165 

2467.....................................1220 

2486..................................... 1182 

2487D................................... 1182 

2488D................................... 1182 

2489D................................... 1182 

2490D................................... 1182 

2491..................................... 1182 

2492..................................... 1182 

2493DD................................. 1182 

25-004...................................702 

25-005...................................702 

25-006...................................702 

25-007...................................702 

25-008...................................702 

25-010....................................702 

25-011....................................702 

25-012....................................702 

25013.....................................864 

25-014....................................702 

25-016....................................702 

25-018....................................703 

25-020...................................703 

25-022...................................703 

25024.....................................864 

25-024....................................703 

25-026...................................703 

25-028...................................703 

2503.......................................864 

25-030...................................703 

25-032....................................703 

2504.......................................864 

25-108....................................701 

25-109....................................701 

25-110....................................701 

25-111....................................701 

25-112....................................701 

25-114....................................701 

25-116....................................701 

25-118....................................701 

25-120....................................701 

25-122....................................701 

25-124....................................701 

25-126....................................701 

25-128....................................701 

25-130....................................701 

25-132....................................701 

25-162....................................702 

25-164....................................702 

25-166....................................702 

25-168....................................702 

25-170....................................702 

25-172....................................702 

25-174....................................702 

2517D................................... 1214 

2520.....................................1239 

25-208....................................692 

25-210....................................692 

25-211....................................692 

25-212....................................692 

25-214....................................692 

25-216....................................692 

25-218....................................692 

2521D................................... 1171 

2522.......................................864 

25-220....................................692 

25-222....................................692 

25-224....................................692 

25-226....................................692 

25-228....................................692 

2522D...................................1076 

25-230....................................692 

25-232....................................692 

25-234....................................692 

25-236....................................692 

25-238....................................692 

25-240....................................692 

25-242....................................697 

25-244....................................697 

25-246....................................697 

25-248....................................697 

2524D...................................1192 

25-252....................................697 

25-254....................................697 

25-256....................................697 

25-258....................................697 

25-260....................................697 

25-264....................................697 

25-266....................................697 

25-268....................................697 

25-270....................................697 

25-272....................................697 

25-276....................................697 

2527D...................................1075 

25-280....................................697 

25-282....................................697 

25-284....................................697 

25-288....................................697 

25-308....................................693 

25-310....................................693 

25-312....................................693 

25-314....................................693 

25-316....................................693 

25-318....................................693 

25-320....................................693 

25-322....................................693 

25-324....................................693 

25-326....................................693 

25-328....................................693 

25-330....................................693 

25-332....................................693 

2534D.....................................881 

2538D...................................1208 

25-412....................................691 

25-414....................................691 

25-416....................................691 

25-418....................................691 

25-420....................................691 

25-422....................................691 

25-424....................................691 

25-426....................................691 

25-428....................................691 

25-430...................................691 

25-432....................................691 

25-458...................................696 

25-460...................................696 

25-462...................................696 

25-464...................................697 

25-466...................................697 

25-468...................................697 

25-470....................................697 

25-472....................................697 

25-474....................................697 

25-476....................................697 

25-478....................................697 

25-480...................................697 

25-482...................................697 

25-484...................................697 

25-486...................................697 

25-488...................................697 

25-490...................................697 

25-508....................................723 

2550D...................................1238 

25-510....................................723 

25-512....................................723 

25-514....................................723 

25-516....................................723 

25-518....................................723 

25-520....................................723 

25-522....................................723 

25-524....................................723 

25-526....................................723 

25-528....................................723 

2554D...................................1239 

25-600...................................684 

25-602...................................684 

25-605...................................683 

25-607...................................687 

25-608...................................687 

25-609...................................683 

25-611....................................688 

25-613....................................682 

25-616....................................682 

25-626...................................666 

25-631....................................666 

25-637...................................665 

25-642...................................665 

25-652...................................664 

25-655...................................663 

25-658...................................675 

25-661...................................635 

25-662...................................636 

25-667...................................636 

25-671....................................662 

25-675....................................662 

25-677...................................676 

25-680...................................676 

25-681....................................675 

25-682...................................674 

25-685...................................673 

25-692...................................723 

25-694...................................722 

25-696...................................722 

25-808...................................642 

25-810....................................642 

25-811....................................642 

25-812....................................642 

25-814....................................642 

25-816....................................642 

25-818....................................642 

25-820....................................642 

25-822....................................642 

25-824....................................642 

2593.....................................1077 

2595D...................................1229 

26-007................................... 741 

26-022D................................. 741 

26-031.................................... 741 

26-034D................................. 741 

26-043................................... 741 

26-046................................... 741 

26-058D................................. 741 

26-064................................... 741 

26-067................................... 741 

26-079.................................... 741 

26-094................................... 741 

26-097D................................. 741 

26-106D.................................. 741 

26-121.................................... 741 

26-124.................................... 741 

26-133.................................... 741 

26-139.................................... 741 

26-145....................................742 

26-151D..................................742 

26-163....................................742 

26-166D..................................742 

26-169....................................742 

26-172....................................742 

26-178....................................742 

26-187D..................................742 

26-190D..................................742 

26-199....................................742 

261PTH.................................1049 

26-202....................................742 

26-273....................................734 

26-282....................................733 

263P.....................................1049 

2646D...................................1190 

2647D................................... 1191 

2649D................................... 1191 

26-543D.................................728 

26-558...................................728 

26-567....................................728 

26-579....................................728 

265D..................................... 1215 

266....................................... 1215 

26-631...................................727 

26-643...................................727 

26-658...................................727 

26-667...................................727 

26-679...................................727 

26-697...................................727 

26-706....................................727 

26-724....................................727 

26-733....................................727 

26-751....................................727 

26-754....................................727 

26-763....................................727 

26-766....................................727 

26-769....................................727 

26-775....................................727 

26-778....................................727 

26-793....................................727 

26-799....................................727 

26-849...................................724 

26-852....................................724 

2690GP...................................961 

27-110.....................................647 

27-111.....................................647 

27-112.....................................647 

27-113D..................................647 

27-114D..................................647 

27-115.....................................647 

27-116.....................................647 

27-143....................................729 

27-158....................................729 

27-167....................................729 

27-194....................................729 

27-264....................................730 

27-268....................................730 

27-334....................................729 

27-343....................................729 

27-358....................................729 

27-367....................................729 

27-379....................................729 

27-394....................................729 

27-397....................................729 

27-406....................................729 

27-424....................................729 

27-451....................................729 

27-466....................................729 

27-469....................................729 

27-475....................................729 

27-481....................................729 

27-508....................................645 

27-509....................................645 

27-510....................................645 

27-511....................................645 

27-512....................................645 

27-513....................................645 

27-514....................................645 

27-515....................................645 

27-516....................................645 

27-517....................................645 

27-518....................................645 

27-519....................................645 

27-520....................................645 

2756D................................... 1191 

27-570....................................726 

2757D...................................1192 

27-588....................................732 

27-591....................................732 

27-594....................................732 

27-596....................................732 

27-599....................................732 

27-601....................................732 

27-602....................................732 

27-603....................................732 

27-604....................................732 

27-607....................................640 

27-608....................................644 

27-609....................................637 

27-613....................................731 

27-614....................................731 

27-616....................................731 

19 

I N D E X 

1429


I N D E X 19 

1430 

27-617....................................731 

27-619....................................731 

2761D...................................1203 

27-620....................................731 

27-622....................................731 

27-624....................................731 

27-626....................................731 

27-628....................................731 

27-635....................................643 

27-643....................................743 

27-658....................................743 

27-663....................................733 

27-664....................................733 

27-665....................................733 

27-667....................................743 

27-679....................................743 

27-694....................................743 

27-704....................................639 

27-708....................................639 

2770D...................................1220 

27-724....................................743 

2774D...................................1207 

27-751....................................743 

2775D...................................1222 

27-768....................................736 

2776D................................... 1174 

27-770....................................735 

27-812....................................744 

27-814....................................744 

27-816....................................744 

27-818....................................744 

27-820....................................744 

27-822....................................744 

27-824....................................744 

27-826....................................744 

27-828....................................744 

27-830....................................744 

27-832....................................744 

27-834....................................744 

27-836....................................744 

27-840....................................744 

27842.....................................982 

27-844....................................744 

27-846....................................744 

27-848....................................744 

27-852....................................744 

27-854....................................744 

27-856....................................744 

27-858....................................744 

27-860....................................744 

27-864....................................744 

27-885....................................737 

27-895....................................736 

27-903....................................745 

27-904....................................745 

27-906....................................745 

27-907....................................745 

27-908....................................745 

27-909....................................745 

2790D...................................1227 

2790HKP................................962 

27-910....................................745 

27-911....................................745 

27-912....................................745 

27-914....................................745 

27-916....................................745 

27-918....................................745 

27-920....................................745 

27-937....................................737 

27-942....................................738 

27-943....................................739 

27-945....................................738 

27N.........................................944 

280.......................................1206 

28-024....................................755 

28-028....................................755 

28-030...................................755 

28-032....................................755 

28-034...................................755 

28-036...................................755 

28-038...................................755 

28-040...................................755 

28-042....................................755 

28-044...................................755 

28-046...................................755 

28-048...................................755 

28-050...................................755 

28-052....................................755 

28-056...................................755 

28-060...................................755 

28-064...................................755 

28-068D.................................755 

28-072D.................................755 

28-076....................................755 

28-080...................................755 

28-130....................................746 

28-135....................................746 

28-140....................................746 

28-145....................................746 

28-150....................................746 

28-153....................................740 

28-155....................................740 

28-212....................................746 

28-214....................................746 

28-216....................................746 

28-218....................................746 

28-220....................................746 

28-222....................................746 

28-224....................................746 

28-228....................................746 

2822D...................................1202 

2824D...................................1237 

28-250D................................. 741 

28-312....................................749 

28-314....................................749 

28-316....................................749 

28-318....................................749 

28-320....................................749 

28-322....................................749 

28-324....................................749 

28-326....................................749 

28-328....................................749 

28-330....................................749 

28-332....................................749 

2833D................................... 1181 

2834D................................... 1182 

2835D................................... 1182 

2836DD................................ 1182 

28-386....................................748 

28-404...................................782 

28-406...................................782 

28-408...................................782 

2840D...................................1077 

28-410....................................782 

28-412....................................782 

28-415D..................................782 

28-418....................................782 

28-424....................................782 

28-430................................... 747 

28-435................................... 747 

28-440................................... 747 

28-442.................................... 747 

285D.....................................1206 

287D.....................................1207 

28-810....................................641 

28-812....................................641 

28-814....................................641 

28-816....................................641 

28-818....................................641 

28-820....................................641 

28-822....................................641 

28-824....................................641 

28-850....................................781 

28-900....................................634 

28-901....................................634 

2897D................................... 1177 

28N.........................................944 

290101.................................1209 

290171.................................1209 

2901D...................................1209 

29-402.....................................82 

29-403.....................................82 

29-404.....................................82 

29-405.....................................82 

29-407.....................................82 

29-410......................................82 

29-411......................................82 

29-412......................................82 

29-413......................................82 

29-414......................................82 

29-415......................................82 

29-416......................................82 

29-418......................................82 

29-420.....................................83 

29-421......................................83 

29-422.....................................83 

29-424......................................83 

29-426.....................................83 

29-428......................................83 

29-430.....................................83 

29-432.....................................83 

29-434.....................................83 

29-436.....................................83 

29-438.....................................83 

29-440.....................................83 

29-442.....................................83 

29-444.....................................83 

29-446.....................................83 

29-448.....................................83 

29-450.....................................83 

29-451......................................83 

29-452.....................................83 

29-454.....................................83 

29-456.....................................83 

29-458.....................................83 

29-460.....................................83 

29-462.....................................83 

29-464.....................................83 

29-466.....................................83 

29-468.....................................83 

29-470......................................83 

29-472......................................83 

29-474......................................83 

29-476......................................83 

2948D...................................1259 

2955D.....................................787 

2956D.....................................787 

2957D.....................................787 

295D.....................................1206 

2967............................ 1076,1165 

2968D...................................1076 

2979.....................................1239 

298D.....................................1206 

2991D...................................1227 

2992D...................................1166 

29N.........................................944 

2DAN......................................948 

30052D.................................1258 

30-108....................................708 

30-110....................................708 

30-112....................................708 

30-114....................................708 

30-116....................................708 

30-118....................................708 

30-120....................................708 

30-122....................................708 

30-124....................................708 

30-126....................................708 

30-128....................................708 

30-130....................................708 

30-132....................................708 

30-208....................................699 

30209...................................1244 

30-210....................................699 

30-211....................................699 

30-212....................................699 

30-214....................................699 

30215...................................1244 

30-216....................................699 

30-218....................................699 

30-220....................................699 

30221D.................................1244 

30-222....................................699 

30-224....................................699 

30-226....................................699 

30227...................................1244 

30-228....................................699 

30-230....................................699 

30-232....................................699 

30233...................................1244 

30-234....................................699 

30-236....................................699 

30-238....................................699 

30239D.................................1244 

30-240....................................699 

30-242....................................699 

30243D.................................1256 

30-244....................................699 

30-246....................................699 

30246D.................................1256 

30247D.................................1256 

30-248....................................699 

30248D.................................1257 

30-252....................................699 

30-254....................................699 

30-256....................................699 

30-258....................................699 

30-260....................................699 

30-264....................................699 

30-266....................................699 

30-268....................................699 

30-270....................................699 

30-272....................................699 

30-276....................................699 

30-280....................................699 

30-282....................................700 

30-284....................................700 

30-288....................................700 

3029..................................... 1215 

302975................................. 1215 

30-308...................................706 

30-310....................................706 

30-311....................................706 

30-312....................................706 

30-314....................................706 

30-316....................................706 

30-318....................................706 

30-320....................................706 

30-322....................................706 

30-324....................................706 

30-326....................................706 

30-328....................................706 

30-330...................................706 

30-332....................................706 

30343...................................1244 

30344...................................1244 

30345D.................................1244 

30346...................................1244 

30347...................................1244 

30348D.................................1244 

30354...................................1256 

30421D.................................1254 

30422D.................................1254 

30423D.................................1254 

30424...................................1254 

30425D.................................1254 

30426D.................................1254 

30427D.................................1254 

30428D.................................1254 

30429D.................................1254 

30430D.................................1254 

30431D.................................1254 

30443D.................................1255 

30444...................................1255 

30445...................................1255 

30446...................................1255 

30447D.................................1255 

30448D.................................1255 

30449D.................................1255 

30450D.................................1255 

30451D.................................1255 

30452...................................1255 

30453D.................................1255 

30454...................................1255 

30455D.................................1255 

30456...................................1255 

30484...................................1255 

30485...................................1255 

30486...................................1255 

30487D.................................1255 

30488D.................................1255 

30489D.................................1255 

30526D.................................1248 

30527...................................1248 

30528...................................1248 

30529...................................1248 

30530D.................................1248 

30532D.................................1248 

30533...................................1248 

30598...................................1256 

30602...................................1256 

30-607...................................689 

30-608...................................690 

30-631...................................681 

30-636...................................680 

30638...................................1254 

30639...................................1254 

30640D.................................1255 

30641...................................1255 

30-644...................................680 

30726...................................1258 

30-734....................................743 

30-743....................................743 

30-758....................................743 

30-767....................................743 

30-779....................................743 

30-794....................................743 

30-797....................................743 

30-806...................................743 

30-824....................................743 

30827D.................................1258 

3082D...................................1224 

3083D...................................1224 

30-851....................................743 

30-869...................................743 

30-872....................................743 

30-896...................................743 

30-902...................................743 

31-008....................................765 

31-010....................................765 

31-012....................................765 

31-014D..................................765 

31-016....................................765 

31-018D..................................765 

31-022....................................765 

31-024....................................765 

31-028....................................765 

31-030....................................765 

31-032....................................765 

31-034....................................765 

31-036....................................765 

31037D.................................1256 

31038D.................................1256 

31-040....................................765 

31-044....................................765 

31-046....................................765 

31-048....................................765 

31-052....................................765 

31052D.................................1256 

31-058....................................765 

31-064....................................765 

31-070....................................765 

31-072....................................765 

31-076D.................................765 

31-078D.................................765 

31-082D.................................765 

31-084....................................765 

31-088....................................765 

31090...................................1247 

310901GR...............................823 

310902GR...............................823 

310903GR...............................823 

31-094....................................765 

31-096D.................................765 

31100....................................1065


31121D..................................1248 

31122D.................................1248 

31138....................................1247 

311901GR...............................823 

311902GR...............................823 

311903GR...............................823 

311904GR...............................823 

3121D...................................1239 

312901GD...............................823 

3129504...............................1308 

3129507...............................1308 

3129907...............................1308 

31300...................................1064 

31-314....................................764 

31-316D..................................764 

31-318....................................764 

31-320....................................764 

31-322....................................764 

31-324....................................764 

31406D.................................1249 

31407D.................................1249 

31408D.................................1249 

31409...................................1249 

31410....................................1249 

31411....................................1249 

31414....................................1249 

31415....................................1249 

31416....................................1249 

31430...........................1159,1178 

3149......................................1229 

3150D.....................................885 

3151........................................885 

3152D.....................................885 

3155D.......................................68 

3157...................................... 1182 

3157D...................................1259 

3161D................................... 1219 

3162D................................... 1219 

3163D...................................1207 

3191D...................................1236 

3195D...................................1221 

3209507...............................1308 

32282C.................................1247 

3245............................ 1178,1237 

3246D...................................1220 

32-495....................................757 

32-520....................................756 

32-524....................................756 

32-528....................................756 

32-530....................................756 

32-532....................................756 

32-534....................................756 

32-536....................................756 

3253D...................................1227 

32-540....................................756 

32-542....................................756 

32-546....................................756 

32-548....................................756 

32-552....................................756 

32-558....................................756 

32-560....................................756 

32-564....................................756 

3261D.....................................786 

3270D................................... 1219 

327175D...............................1184 

327176.................................1184 

3271DD.................................1184 

32-728D..................................756 

32-730....................................756 

32-732....................................756 

32-734....................................756 

32-736....................................756 

32-740....................................756 

32-742....................................756 

32-746....................................756 

32-748....................................756 

32-752....................................757 

32-758....................................757 

32-760....................................757 

32-764....................................757 

32-820....................................757 

32-822....................................757 

32-824....................................757 

32-828....................................757 

32-830....................................757 

32-832....................................757 

32-834....................................757 

32-836....................................757 

32-840....................................757 

32-842....................................757 

32-846....................................757 

32-848....................................757 

32-852....................................757 

32-858....................................757 

32-860....................................757 

32-864....................................757 

3288D...................................1229 

3289.....................................1166 

3290D...................................1168 

3293D...................................1073 

33001...................................1006 

33007...................................1006 

33016...................................1006 

33024...................................1005 

33-034...................................758 

33-036...................................758 

33-038...................................758 

33-040...................................758 

33-042...................................758 

33-044...................................758 

33-046...................................758 

33-048...................................758 

33-052....................................758 

33-054...................................758 

33-056...................................758 

33-058...................................758 

3305D...................................1164 

33-060...................................758 

33-062...................................758 

33-064...................................758 

33-068...................................758 

33-070....................................758 

33-072....................................758 

33-074....................................758 

33-076....................................758 

33-080...................................758 

33-082...................................758 

33-084...................................758 

33-088...................................758 

33-092...................................758 

33-094...................................758 

33-096...................................758 

33-100....................................758 

3312D...................................1234 

3321.....................................1168 

3324D...................................1224 

33-340...................................759 

33-342....................................759 

33-344...................................759 

33-346...................................759 

33348...................................1246 

33-348...................................759 

33351...................................1246 

33-352....................................759 

33-354....................................759 

33-356....................................759 

33-358....................................759 

33-360....................................759 

33362...................................1249 

33363D.................................1249 

33364...................................1249 

33-364....................................759 

33365...................................1249 

33366...................................1249 

33-366....................................759 

33-368....................................759 

33-370....................................760 

33-372....................................760 

33-376....................................760 

33-378....................................760 

33-380....................................760 

33-382....................................760 

33-384....................................760 

33-388....................................760 

33-390....................................760 

33-394....................................760 

33-396....................................760 

33-400...................................760 

33-408...................................760 

33-412....................................760 

33416...................................1245 

33417...................................1245 

33418D.................................1245 

33419D.................................1245 

33-420....................................760 

33420D.................................1245 

33421...................................1245 

33-424....................................760 

33-432...................................760 

33-436...................................760 

3343D...................................1166 

33-444...................................760 

33-448...................................760 

33-452....................................760 

33-460...................................760 

33-468...................................760 

33-472....................................760 

33-476....................................760 

33-484...................................760 

33-492...................................760 

33-534...................................760 

33-540...................................760 

33-546...................................760 

33-552....................................760 

33-558...................................760 

3355D...................................1207 

33-564...................................760 

33-570....................................760 

33-576....................................761 

3358.....................................1222 

335804.................................1222 

33-582....................................761 

33-588...................................761 

33-594...................................761 

33-600...................................761 

33-612....................................761 

33-624....................................761 

3367.....................................1188 

3368.....................................1228 

3368F...................................1228 

3369.....................................1228 

3369F...................................1228 

3376D...................................1207 

3377..................................... 1217 

3379D...................................1194 

3386..................................... 1171 

3387.....................................1235 

3390.....................................1204 

3408D...................................1168 

34-101....................................762 

34-104....................................762 

34-107....................................762 

34-110....................................762 

34-113....................................762 

34-116....................................762 

34-119....................................762 

34-121....................................762 

34-124....................................762 

34-127....................................762 

34-130D..................................762 

34-133D..................................762 

34-136....................................762 

3413D...................................1236 

3414D................................... 1174 

34-151....................................762 

34-154....................................762 

34-157....................................762 

34-201D.................................763 

34-204....................................763 

34-207....................................763 

34-210D.................................763 

34-213D..................................763 

34-216D.................................763 

34-219D.................................763 

3422..................................... 1176 

34-222D.................................763 

34-225D.................................763 

34-228....................................763 

34-231....................................763 

34-234....................................763 

34-237....................................763 

34-240....................................763 

34-243....................................763 

34-301....................................763 

34-305....................................763 

34-307....................................763 

34-310....................................763 

34-313....................................763 

34-351....................................764 

34-354...................................764 

34-358....................................764 

34-361....................................764 

34-363...................................764 

34-366...................................764 

34-376....................................764 

34-404...................................782 

34-406...................................782 

34-408...................................782 

34-410....................................782 

34-412....................................782 

34-415....................................782 

34-418....................................782 

3442.....................................1185 

34468.....................................981 

3449D...................................1219 

345071.................................1235 

3450D...................................1235 

3457..................................... 1214 

3467..................................... 1171 

3468.....................................1165 

3469.....................................1165 

3472..................................... 1175 

3473..................................... 1176 

3483DD..................................884 

3484D.....................................884 

34-850...................................781 

3485D.....................................884 

3486.......................................884 

3487.......................................884 

3488D.....................................884 

3489.......................................884 

3490D.....................................884 

3491.......................................884 

3492.......................................884 

3493.......................................884 

3494.......................................884 

3495.......................................884 

3498.......................................786 

35025N.................................1024 

35031N.................................1024 

35061N.................................1024 

35073N.................................1024 

3508D...................................1228 

350971.................................1231 

350972.................................1231 

3509D...................................1231 

35108N.................................1024 

3510D...................................1231 

35114N.................................1024 

3525D...................................1208 

3526D................................... 1171 

3527.....................................1224 

352870.................................1204 

3528D...................................1204 

3529D...................................1230 

3530D...................................1168 

3551D................................... 1139 

3552..................................... 1139 

3553D................................... 1139 

3561..................................... 1139 

3562D................................... 1139 

3563..................................... 1139 

3590FS...................................962 

3591D...................................1140 

35976...................................1024 

35982...................................1024 

36018N.................................1024 

3605.....................................1258 

36054...................................1024 

36-107....................................186 

36-108....................................186 

36-109....................................186 

36-110....................................186 

36-111....................................186 

36-112....................................186 

36-114....................................186 

36-116....................................186 

36-208....................................190 

36-210....................................190 

36-212....................................190 

36219N.................................1025 

36227N.................................1025 

3624D................................... 1137 

3625..................................... 1137 

3625115................................1360 

3625135...............................1360 

3625215...............................1360 

3625235...............................1360 

3625315...............................1360 

3625335...............................1360 

36253N.................................1025 

3625415...............................1360 

3625435...............................1360 

3625515...............................1360 

3625535...............................1360 

3625615...............................1360 

3625635...............................1360 

3626..................................... 1138 

3626115...............................1360 

3626215...............................1360 

3626315...............................1360 

3627..................................... 1137 

36281N.................................1025 

3628D................................... 1138 

3630435...............................1356 

3630535...............................1356 

3630635...............................1356 

3630835...............................1356 

3631035...............................1356 

36-312....................................282 

3631235...............................1356 

36-314....................................282 

3631435...............................1356 

36-316....................................282 

3631635...............................1356 

36-318....................................282 

36-320....................................282 

3632035...............................1356 

36-322....................................282 

36-324....................................282 

36-326....................................282 

36-328....................................282 

36-330...................................282 

36-332....................................282 

3637.....................................1258 

3639.....................................1258 

3640435...............................1357 

3640535...............................1357 

3640635...............................1357 

3640835...............................1357 

3641.....................................1258 

3641035...............................1357 

36-412....................................288 

3641235...............................1357 

36-414....................................288 

3641435...............................1357 

36-416....................................288 

3641635...............................1357 

36-418....................................288 

36-420....................................288 

3642035...............................1357 

36-422...................................288 

36-424....................................288 

3643.....................................1258 

3649D...................................1258 

19 

I N D E X 

1431


I N D E X 19 

1432 

3651D...................................1258 

36521N.................................1025 

36527N.................................1025 

3653.....................................1258 

36533N.................................1025 

36539N.................................1025 

36545N.................................1025 

36557N.................................1025 

3655DD................................1258 

36563N.................................1025 

36569N.................................1025 

3657.....................................1258 

3659D...................................1258 

36-632...................................376 

36-634...................................376 

36-636...................................376 

3664.....................................1258 

36-642...................................376 

3666.....................................1258 

36790D................................. 1178 

3680D................................... 1174 

3681D................................... 1174 

3684D................................... 1175 

3685D...................................1259 

3686D...................................1259 

37-004....................................187 

37-004A.................................188 

37-005....................................187 

37-005A..................................188 

37-006....................................187 

37-006A..................................188 

37-007....................................187 

37-007A..................................188 

37-008....................................187 

37-008A..................................188 

37-009A..................................188 

37-009D.................................187 

37-010....................................187 

37-010A..................................188 

37-011....................................187 

37-011A..................................188 

37-012A..................................188 

37-012D..................................187 

37-013....................................187 

37-013A..................................188 

37-014D..................................187 

37-015....................................187 

37029...................................1006 

3702D...................................1201 

37035...................................1006 

3703D...................................1202 

3704D...................................1202 

3705.....................................1201 

37053...................................1026 

37060...................................1027 

37071.....................................977 

37081...................................1026 

37-081....................................187 

37-083....................................187 

37088...................................1026 

37-105....................................187 

37-106....................................187 

37-107....................................187 

37-108....................................187 

37109...................................1026 

37-109....................................187 

37-110.....................................187 

37-111.....................................187 

37-112.....................................187 

37-113.....................................187 

37-114.....................................187 

37116....................................1026 

37165...................................1026 

37172...................................1026 

37-183....................................187 

37193...................................1027 

37200...................................1027 

37-204....................................191 

37-204A..................................192 

37-205....................................191 

37-205A..................................192 

37-206....................................191 

37-206A..................................192 

37-207....................................191 

37-207A..................................192 

37-208....................................191 

37-208A..................................192 

37-209....................................191 

37-209A..................................192 

37-210....................................191 

37-210A..................................192 

37-211....................................191 

37-211A..................................192 

37-212....................................191 

37-212A..................................192 

37-213....................................191 

37-213A..................................192 

37-214....................................191 

37-214A..................................192 

37-215....................................191 

37228...................................1027 

37249...................................1026 

37256...................................1026 

37277...................................1026 

37-281....................................191 

37-283....................................191 

3729.....................................1200 

3737D...................................1208 

3738.....................................1208 

3739.....................................1208 

37392...................................1006 

37398...................................1006 

37404...................................1006 

37416....................................1026 

37423....................................1027 

37430...................................1027 

37444...................................1026 

37451....................................1026 

37458...................................1026 

37472....................................1026 

37479....................................1026 

37486...................................1026 

37500...................................1026 

37556...................................1027 

37563...................................1027 

3756D...........................1074,1217 

37584...................................1027 

37591...................................1027 

37598...................................1027 

3761............................ 1075,1217 

37612...................................1026 

37619...................................1026 

37626...................................1026 

3763............................ 1075,1218 

37640...................................1026 

37647...................................1026 

3766.....................................1075 

37703...................................1027 

37-703....................................193 

37-704....................................193 

37-705....................................193 

37-707....................................193 

37-709....................................193 

37-711....................................193 

37-713....................................193 

3774D...........................1074,1218 

37752...................................1025 

37755...................................1006 

37761...................................1006 

37767...................................1006 

3777.............................1074,1218 

37779...................................1026 

37786...................................1027 

37793...................................1027 

37800...................................1027 

37807...................................1026 

37814...................................1026 

37821...................................1026 

37828...................................1026 

37835...................................1026 

37842...................................1026 

37849...................................1026 

37863...................................1026 

3787.....................................1210 

37870...................................1026 

3788.....................................1210 

3789..................................... 1211 

37891...................................1026 

37898...................................1026 

3790D................................... 1211 

3791..............................880,1162 

37919...................................1027 

37926...................................1027 

3792D............................ 881,1162 

3793.............................. 881,1162 

37947...................................1027 

37951...................................1210 

37952...................................1210 

37954...................................1027 

3795D...................................1209 

3796..................................... 1211 

37961...................................1027 

37975...................................1026 

37982...................................1026 

37989...................................1026 

37996...................................1026 

379D.....................................1183 

37N.........................................946 

380.......................................1183 

38003...................................1026 

38-006...................................285 

38-007D.................................285 

38-008D.................................285 

38-009...................................285 

38010...................................1026 

38-010D.................................285 

38-011....................................285 

38-012D.................................285 

38-013....................................285 

38-014....................................285 

38-015....................................285 

38-016....................................285 

38-017....................................285 

38-018....................................285 

38-019....................................285 

38-020D.................................285 

38-021...................................285 

38-022...................................285 

38-023D.................................285 

38-026...................................285 

38059...................................1027 

38-106....................................285 

38-107....................................285 

38-107A..................................286 

38-108....................................285 

38-108A..................................286 

38-109....................................285 

38-109A..................................286 

38-110....................................285 

38-110A..................................286 

38-111....................................285 

38-111A..................................286 

38-112....................................285 

38-112A..................................286 

38-113....................................285 

38-113A..................................286 

38-114....................................285 

38-114A..................................286 

38115....................................1025 

38-115....................................285 

38-115A..................................286 

38-116....................................285 

38-116A..................................286 

38-117....................................285 

38-117A..................................286 

38-118....................................285 

38-118A..................................286 

38-119....................................285 

38-119A..................................286 

38-120....................................286 

38-121....................................286 

38-121A..................................286 

38-122....................................286 

38-123....................................286 

38-126....................................286 

38-206....................................290 

38-207....................................290 

38-208....................................290 

38-209....................................290 

38-210....................................290 

38-211....................................290 

38-212....................................290 

38-213....................................290 

38-214....................................290 

38-215....................................290 

38-216....................................290 

38-217....................................290 

38-218....................................290 

38-219....................................290 

38-220....................................290 

38-221....................................290 

38-222....................................290 

38-223....................................290 

38-226....................................290 

38-306....................................290 

38-307....................................290 

38-308....................................290 

38-309....................................290 

38-309A.................................291 

38-310....................................290 

38-310A..................................291 

38-311....................................290 

38-311A..................................291 

38-312....................................290 

38-312A..................................291 

38-313....................................290 

38-313A..................................291 

38-314....................................290 

38-314A..................................291 

38-315....................................290 

38-315A..................................291 

38-316....................................290 

38-316A..................................291 

38-317....................................290 

38-317A..................................291 

38-318....................................290 

38-318A..................................291 

38-319....................................290 

38-319A..................................291 

38-320....................................290 

38-321....................................291 

38-322....................................291 

38-323....................................291 

38-326....................................291 

38370D.................................1184 

383D.....................................1184 

38570D.................................1184 

3859D.....................................883 

385D.....................................1184 

3860D...................................1227 

3861D...................................1227 

3862D...................................1227 

3863.....................................1227 

3864D...................................1227 

3865.....................................1226 

38-704A..................................296 

38-705....................................296 

38-705A..................................296 

38-707....................................296 

38-707A..................................296 

38-709....................................296 

38-709A..................................296 

38-711....................................296 

38-711A..................................296 

38-712....................................296 

38-713....................................296 

38-713A..................................296 

38-714....................................296 

38-715....................................296 

38-715A..................................296 

38-747....................................297 

38-749....................................297 

38-751....................................297 

38-752....................................297 

38-753....................................297 

38-754....................................297 

38-755....................................297 

3880.......................................986 

3881.......................................987 

3882.......................................987 

3883.......................................987 

3884D.....................................987 

3885.......................................985 

38-850............................295,752 

38-851.............................295,752 

38-852.............................295,752 

38-853............................295,752 

38-854............................295,752 

38-855............................295,752 

38-856............................295,752 

38-857.............................295,752 

38-858............................295,752 

38-859.............................295,752 

3886.......................................986 

38-861.............................295,752 

38-862............................295,752 

3887.......................................984 

3888D...................................1201 

3890D...................................1169 

3891D...................................1169 

3892D...................................1169 

3893D................................... 1170 

3894..................................... 1170 

3895D................................... 1170 

3896D................................... 1170 

3897D................................... 1170 

3898D................................... 1170 

3899500...............................1350 

3899501...............................1350 

38N.........................................946 

3900..................................... 1175 

39-010....................................371 

39-011....................................371 

39-012....................................371 

39-013....................................371 

39-014D.................................371 

39-015....................................371 

39-016D.................................371 

39-017....................................371 

39-018....................................371 

39-019....................................371 

39-020D.................................371 

39-021...................................371 

39-022D.................................371 

39-023D.................................371 

39-024D.................................371 

39-025...................................371 

39-026...................................371 

39-027...................................371 

39-028...................................371 

39-029...................................371 

39-030...................................371 

39-032...................................371 

39-036...................................371 

3905D................................... 1215 

3906D...................................1232 

3907D...................................1219 

3908D...................................1219 

3909D...................................1219 

39-109A..................................373 

3910D...................................1219 

39-110A..................................373 

39-110D..................................371 

39-111....................................371 

39-111A..................................373 

39-112....................................371 

39-112A..................................373 

39-113....................................371 

39-113A..................................373 

39-114....................................371 

39-114A..................................373 

39-115....................................371 

39-115A..................................373 

39-116....................................371 

39-116A..................................373


39-117....................................371 

39-117A..................................373 

39-118A..................................373 

39-118D..................................371 

39-119A..................................373 

39-119D..................................372 

3911D...................................1220 

39-120A..................................373 

39-120D..................................372 

39-121A..................................373 

39-121D..................................372 

39-122A..................................373 

39-122D..................................372 

39-123....................................372 

39-123A..................................373 

39-124....................................372 

39-124A..................................373 

39-125A..................................373 

39-125D..................................372 

39-126....................................372 

39-126A..................................373 

39-127....................................372 

39-127A..................................373 

39-128....................................372 

39-128A..................................373 

39-129....................................372 

3912905IL............................1348 

3912D...................................1220 

39-130....................................372 

39-130A..................................373 

39-131....................................372 

3913105IL.............................1348 

39-132....................................372 

3913205IL............................1348 

39-132A..................................373 

39-136....................................372 

39-136A..................................373 

3914205IL............................1349 

3914235IL............................1349 

3914305IL............................1349 

3914335IL............................1349 

3914405IL............................1349 

3914435IL............................1349 

3914505IL............................1349 

3914535IL............................1349 

3914705IL............................1349 

3914735IL............................1349 

3914905IL............................1349 

3915105IL.............................1349 

3915205IL............................1349 

3916D...................................1234 

3917D...................................1234 

3919D................................... 1172 

3920D................................... 1172 

3921D................................... 1172 

3922715IL............................1348 

3922915IL............................1348 

3922D................................... 1173 

3923115IL.............................1348 

3923215IL............................1348 

3923415IL............................1348 

3923D................................... 1173 

3924215IL............................1349 

3924315IL............................1349 

3924415IL............................1349 

3924515IL............................1349 

3924715IL.............................1349 

3924915IL............................1349 

3924D................................... 1173 

3925115IL.............................1349 

3925215IL............................1349 

3925415IL............................1349 

3925D................................... 1173 

3926D................................... 1173 

3927D................................... 1195 

3928D...................................1195 

3929D................................... 1195 

3930D................................... 1195 

39-310....................................378 

39-311....................................378 

39-312....................................378 

39-313....................................378 

39-314....................................378 

39-315....................................378 

39-316....................................378 

39-317....................................378 

39-318....................................378 

39-319....................................378 

3931D...................................1195 

39-320....................................378 

39-321....................................378 

39-322....................................378 

39-323....................................378 

39-324....................................378 

39-325....................................378 

39-326....................................378 

39-327....................................378 

39-328....................................378 

39-329....................................378 

3932D...................................1231 

39-330....................................378 

39-332....................................378 

3933D...................................1231 

3934D...................................1231 

3935.....................................1231 

3936.....................................1231 

3937.....................................1221 

3938D...................................1195 

3939D...................................1231 

3940705IL............................1346 

3940905IL............................1346 

3941.....................................1224 

3941105IL.............................1346 

3942.....................................1224 

3942205IL............................1347 

3942305IL............................1347 

3942405IL............................1347 

3942505IL............................1347 

3942705IL............................1347 

3942905IL............................1347 

3943.....................................1224 

3943205IL............................1347 

3944.....................................1224 

3950..................................... 1176 

3950415IL............................1346 

3950515IL............................1346 

3950715IL............................1346 

3951115IL.............................1346 

3951215IL.............................1346 

3952215IL............................1347 

3952315IL............................1347 

3952415IL.............................1347 

3952515IL............................1347 

3952715IL............................1347 

3952915IL............................1347 

3953115IL.............................1347 

3953215IL............................1347 

3955.....................................1235 

3962.....................................1216 

3970D................................... 1176 

39-711....................................383 

39-713....................................383 

39-715....................................383 

39-717....................................383 

39-719....................................383 

39-722....................................383 

39-724....................................383 

39-751....................................384 

39-753....................................384 

39-755....................................384 

39-757....................................384 

39-759....................................384 

3975D............................880,1163 

39-762....................................384 

3976D............................ 879,1163 

3977.............................. 879,1163 

3978D............................880,1163 

3984..................................... 1191 

398401D............................... 1191 

39855N.................................1027 

39861N.................................1027 

39873N.................................1027 

39881N.................................1027 

39893N.................................1027 

39899N.................................1027 

3990.....................................1233 

3990101..................... 1354-1355 

3990201..................... 1354-1355 

3990301..................... 1354-1355 

3990401....1354-1355,1391,1400 

3990501..................... 1354-1355 

39905N.................................1027 

3990601....1354-1355,1391,1400 

3990701....1354-1355,1391,1400 

3990801..................... 1354-1355 

3990901..................... 1354-1355 

3991.....................................1233 

3991001....1354-1355,1391,1400 

3991101..................... 1354-1355 

39911N.................................1027 

3991401..................... 1354-1355 

3991402..................... 1354-1355 

3991403..................... 1354-1355 

3991404..................... 1354-1355 

3991405..................... 1354-1355 

3991406..................... 1354-1355 

3991407..................... 1354-1355 

3991408..................... 1354-1355 

3991409....1354-1355,1391,1400 

39923N.................................1027 

39929N.................................1027 

39935N.................................1027 

39947N.................................1027 

39965N.................................1027 

39971N.................................1027 

39992N.................................1027 

40076N.................................1028 

40082N.................................1028 

40088N.................................1028 

40-119....................................401 

40-120....................................401 

40-121....................................401 

40-122....................................401 

40-123....................................401 

40-124....................................401 

40-125....................................401 

40-126....................................401 

40-127....................................401 

40-128....................................401 

40-129....................................401 

40-130....................................401 

40-132....................................401 

40-135....................................401 

40-136....................................401 

40-138....................................401 

40-141....................................401 

40-142....................................401 

40-146....................................401 

40-150....................................401 

40-154....................................401 

40-155....................................401 

40-158....................................401 

40-160....................................401 

40222N.................................1028 

40242N.................................1028 

40248N.................................1028 

40254N.................................1028 

40260N.................................1028 

40281N.................................1028 

40287N.................................1028 

40-319....................................403 

40-322....................................403 

40-323....................................403 

40-324....................................403 

40-327....................................403 

40-330...................................403 

40-332....................................403 

40-335...................................403 

40-336...................................403 

40-338D.................................403 

40-341....................................403 

40-346...................................403 

40-350...................................403 

40-355...................................403 

40-360...................................403 

40506...................................1028 

40580N.................................1029 

40645N.................................1029 

40651N.................................1029 

40663N.................................1029 

40687N.................................1029 

40699N.................................1029 

40705N.................................1029 

40717N.................................1029 

41018....................................1029 

41096...................................1029 

41102....................................1029 

412402.................988,1223,1240 

412403.................988,1223,1240 

412406.................988,1223,1240 

412410..................988,1223,1240 

41500.......................... 1153,1169 

41520........................... 1153,1205 

41540.......................... 1154,1205 

41560D........................ 1154,1177 

41580D.........................1154,1175 

41588NN...............................1029 

41590D........................ 1160,1212 

41600...........................1155,1178 

41610........................... 1155,1232 

41612N.................................1029 

41618N.................................1029 

41620D........................ 1156,1231 

41630D........................ 1156,1221 

41636N.................................1029 

41650.......................... 1156,1219 

41660D.........................1157,1220 

41680D........................ 1161,1204 

41690.......................... 1155,1232 

416D.............................1167,1236 

41700D.........................1139,1157 

41710........................... 1140,1157 

41720............................1157,1172 

41730D........................ 1158,1195 

41740D........................ 1158,1195 

41760D........................ 1158,1222 

41761....................................1223 

41762D.................................1223 

41763D.................................1223 

41764....................................1223 

41765....................................1223 

41766....................................1223 

41767D.................................1223 

41768D.................................1223 

41780D.........................1159,1177 

41830.......................... 1160,1230 

41840D.................................1200 

41850...................................1200 

41860................. 1160-1161,1213 

41870............................1161,1213 

41880D.........................1161,1212 

41890.......................... 1159,1230 

41DBN.....................................948 

42030...................................1006 

426N.......................................944 

427N.......................................944 

428N.......................................944 

431D.....................................1202 

438N.......................................946 

43990...................................1233 

44-015................................46-47 

44-016................................46-47 

44-017................................46-47 

4403315...............................1353 

4403415...............................1353 

44-035.....................................52 

4403515...............................1353 

44-036.....................................52 

4403615...............................1353 

4403715...............................1353 

4403815...............................1353 

44-205D.................................163 

44-210D.................................168 

44-215D................................. 174 

44-220D.................................176 

44-225....................................177 

44-300...................................245 

44-305....................................245 

44-310....................................247 

44-315....................................246 

44-320....................................251 

44-321A..................................166 

44-322A................................. 174 

44-323A.................................169 

44-324A.................................263 

44-325....................................252 

44-326A.................................250 

44-330...................................263 

44-335...................................262 

44-340...................................265 

44-345...................................264 

44-346...................................264 

44-350...................................266 

44-355...................................265 

44-360...................................267 

44-365...................................266 

44-370............................ 268,750 

44-375....................................271 

44-380...................................124 

44-385...................................270 

445.........................................882 

44-510....................................330 

44-515....................................332 

44-516A..................................334 

44-520....................................335 

44-525....................................339 

44-530...................................351 

44-535...................................350 

44-540...................................353 

44-545...................................352 

44-546...................................352 

44-550...................................353 

44-555...................................354 

44-560...................................358 

44-565...................................358 

446D.......................................882 

447.........................................883 

44-700....................................389 

44-705....................................392 

44-710....................................394 

44-715....................................395 

44-720....................................396 

448DD....................................883 

45-004...................................442 

4500404...............................1352 

4500405...............................1352 

4500424...............................1352 

45-005...................................442 

4500504...............................1352 

4500505...............................1352 

4500524...............................1352 

45-006...................................442 

4500604...............................1352 

4500605...............................1352 

4500624...............................1352 

45-007...................................442 

45-008...................................442 

4500804...............................1352 

4500805...............................1352 

45-009...................................442 

45-010....................................442 

4501005...............................1352 

45-011....................................442 

45-012....................................442 

45-013....................................442 

45-014....................................442 

45-015....................................442 

4503315...............................1352 

4503415...............................1352 

4503515...............................1352 

4503615...............................1352 

4503715...............................1352 

4503815...............................1352 

4503915...............................1352 

45-083...................................442 

19 

I N D E X 

1433


I N D E X 19 

1434 

4530734...............................1350 

4530735...............................1350 

4530935...............................1350 

45601.....................................977 

45601DH.................................977 

457.........................................882 

45-890...................................437 

46-110....................................467 

46-111....................................467 

46-112....................................467 

46-113....................................467 

46-114....................................467 

46-115....................................467 

46-116....................................467 

46-117....................................467 

46-118....................................467 

46-119....................................467 

46-308D.................................466 

46-309D.................................466 

46-310D.................................466 

46-311D..................................466 

46-312D.................................466 

46-313D.................................466 

46-314D.................................466 

46-315D.................................466 

46-316D.................................466 

46-317D.................................466 

46-318D.................................466 

46-319D.................................466 

46-320D.................................466 

46-321D.................................466 

46-322D.................................466 

46-606...................................464 

46-607...................................464 

46-608...................................464 

46-609...................................464 

46-610....................................464 

46-611....................................464 

46-612....................................464 

46-613....................................464 

46-614....................................464 

46-615....................................464 

46-616....................................464 

46-617....................................464 

46-618....................................464 

46-619....................................464 

46-620...................................464 

46-621...................................464 

46-622...................................464 

46-623...................................464 

46-624....................................464 

46-706....................................465 

46-707....................................465 

46-708....................................465 

46-709....................................465 

46-710....................................465 

46-711....................................465 

46-712....................................465 

46-713....................................465 

46-714....................................465 

46-715....................................465 

46-716....................................465 

46-717....................................465 

46-718....................................465 

46-719....................................465 

46-720....................................465 

46-721....................................465 

46-722....................................465 

46-723....................................465 

46-724....................................465 

46-890...................................455 

46-891....................................455 

46-898...................................456 

46-910....................................457 

47-008....................................496 

47-009....................................496 

47-010....................................496 

47-011....................................496 

47-012....................................496 

47-013....................................496 

47-014....................................496 

47-015....................................496 

47-016....................................496 

47-017....................................496 

47-018....................................496 

47-019....................................496 

47-020....................................496 

47-021....................................496 

47-022....................................496 

47-023....................................496 

47-024....................................496 

47-025....................................496 

47-026....................................496 

47-027....................................496 

47-028....................................496 

47-029....................................496 

47-030....................................496 

47-032....................................496 

47-033....................................496 

47-034....................................496 

47-035....................................496 

47-036....................................496 

47-110.....................................499 

47-111.....................................499 

47-112.....................................499 

47-113.....................................499 

47-114D..................................499 

47-115D..................................499 

47-116.....................................499 

47-117.....................................499 

47-118.....................................499 

47-119.....................................499 

47-121.....................................499 

47-122....................................499 

47-124.....................................499 

47-208....................................497 

47-209....................................497 

47-210D..................................497 

47-211....................................497 

47-212....................................497 

47-213....................................497 

47-214....................................497 

47-215D..................................497 

47-216....................................497 

47-217....................................497 

47-218....................................497 

47-219....................................497 

47-220....................................497 

47-221....................................497 

47-222....................................497 

47-223....................................497 

47-224....................................497 

47-225....................................497 

47-226....................................497 

47-227....................................497 

47-228....................................497 

47-229....................................497 

47-230....................................497 

47-232....................................497 

47-234....................................497 

47-235....................................497 

47-236....................................497 

47-310....................................498 

47-311....................................498 

47-312....................................498 

47-313....................................498 

47-314....................................498 

47-315....................................498 

47-316....................................498 

47-317....................................498 

47-318....................................498 

47-319....................................498 

47-320....................................498 

47-321....................................498 

47-322....................................498 

47-323....................................498 

47-324....................................498 

47-330....................................498 

47-332....................................498 

47-893....................................486 

47-897....................................486 

47-913....................................487 

48-017....................................512 

48-019....................................512 

48-020...................................512 

48-021...................................512 

48-022...................................512 

48-023...................................512 

48-024....................................512 

48-025...................................512 

48-026...................................512 

48-027...................................512 

48-028...................................512 

48-030...................................512 

48-031....................................512 

48-032...................................512 

48-033...................................512 

48-034...................................512 

48-035...................................512 

48-036...................................512 

48-037...................................512 

48-038...................................512 

48-041....................................512 

48-042...................................512 

48-043...................................512 

48-046...................................512 

48-050...................................512 

48-219....................................513 

48-221....................................513 

48-222....................................513 

48-223....................................513 

48-224....................................513 

48-226....................................513 

48-227....................................513 

48-230....................................513 

48-232....................................513 

48-233....................................513 

48-235....................................513 

48-236....................................513 

48-238....................................513 

48-241....................................513 

48-243....................................513 

48-719....................................513 

48-722....................................513 

48-724....................................513 

48-725....................................513 

48-726....................................513 

48-893...................................505 

49-019....................................518 

49-022...................................518 

49-024....................................518 

49-027...................................518 

49-028...................................518 

49-030...................................518 

49-032...................................518 

49-033...................................518 

49-036...................................518 

49-041....................................518 

49-046...................................518 

49-050...................................518 

49-055...................................518 

49-060...................................518 

49-065...................................518 

492.......................................1164 

4944.....................................1257 

50.........................................1051 

5016D...................................1257 

501D.....................................1183 

5046.....................................1257 

505D.....................................1183 

5066DD................................1257 

507CVN...................................919 

5089D...................................1244 

508CVN..................................919 

5090FS...................................962 

5097.....................................1244 

52-004....................................704 

5200404...............................1367 

5200434...............................1367 

52-005....................................704 

5200504...............................1367 

5200534...............................1367 

52-006....................................704 

5200604...............................1367 

5200634...............................1367 

52-007....................................704 

52-008....................................704 

5200804...............................1367 

5200834...............................1367 

52-009....................................704 

52-010....................................704 

5201004...............................1367 

5201034...............................1367 

52-011....................................704 

52-012....................................704 

5201234...............................1367 

52-013....................................704 

52-014....................................704 

52-015....................................704 

52-016....................................704 

52-017....................................704 

52-018....................................704 

52-019....................................704 

52-020....................................704 

52-021....................................704 

52-022....................................704 

52-023....................................704 

52-024....................................704 

52-025....................................704 

5205634...............................1367 

5205834...............................1367 

5206035...............................1367 

5206235...............................1367 

5206435...............................1367 

52-083....................................704 

5208805...............................1367 

5209005...............................1367 

5209205...............................1367 

52-106....................................703 

52-107....................................703 

52-108....................................703 

52-109....................................703 

52-110....................................703 

52-111.....................................703 

52-112.....................................703 

52-113.....................................703 

52-114....................................703 

52-115....................................703 

52-116....................................703 

52-117.....................................703 

52-118....................................703 

52-119....................................703 

52-120....................................703 

52-121....................................703 

52-122....................................703 

52-123....................................703 

52-124....................................703 

52-125....................................703 

52-160....................................705 

52-161....................................705 

52-162....................................705 

52-163....................................705 

52-164....................................705 

52-165....................................705 

52-166....................................705 

52-167....................................705 

52-168....................................705 

52-169....................................705 

522040GR.............................. 417 

522050GR.............................. 417 

52-206....................................695 

522060GR.............................. 417 

52-207....................................695 

522070GR..............................417 

52-208....................................695 

522080GR.............................. 417 

52-209....................................695 

522090GR..............................417 

52-210....................................695 

522100GR...............................417 

52-211....................................695 

522110GR............................... 417 

52-212....................................695 

522120GR...............................417 

52-213....................................695 

522130GR............................... 417 

52-214....................................695 

52-215....................................695 

52-216....................................695 

52-217....................................695 

52-218....................................695 

52-219....................................695 

52-220....................................695 

52-221....................................695 

52-222....................................695 

52-223....................................695 

52-224....................................695 

52-225....................................695 

52-226....................................695 

52-227....................................695 

52-228....................................695 

52-229....................................695 

52-230....................................695 

52-232....................................695 

522350GR..............................417 

52-236....................................698 

52-241....................................698 

522450GR..............................417 

52-246....................................698 

52-250....................................698 

52-255....................................698 

522550GR..............................417 

52-260....................................698 

52-265....................................698 

52-270....................................698 

52-306....................................696 

52-307....................................696 

52-308....................................696 

52-309....................................696 

52-310....................................696 

52-311....................................696 

52-312....................................696 

52-313....................................696 

52-314....................................696 

52-315....................................696 

52-316....................................696 

52-317....................................696 

52-318....................................696 

52-319....................................696 

52-410....................................694 

52-411....................................694 

52-412....................................694 

52-413....................................694 

52-414....................................694 

52-415....................................694 

52-416....................................694 

52-417....................................694 

52-418....................................694 

52-419....................................694 

52-420....................................694 

52-421....................................694 

52-456....................................698 

52-457....................................698 

52-458....................................698 

52-459....................................698 

52-460....................................698 

52-461....................................698 

52-462....................................698 

52-463....................................698 

52-464....................................698 

52-465....................................698 

52-466....................................698 

52-467....................................698 

52-468....................................698 

52-469....................................698 

52-470....................................698 

52-471....................................698 

52-472....................................698 

52-473....................................698 

52-474....................................698 

52-475....................................698 

52-476....................................698 

52-477....................................698 

52-478....................................698 

52-479....................................698


I N D E X 

19 

1435 

52-480....................................698 

52-482....................................698 

52-600....................................686 

52-601....................................686 

52-602....................................688 

52-605....................................685 

52-606....................................689 

52-619....................................685 

52-623....................................672 

52-627....................................672 

52-630....................................671 

52-631....................................671 

52-632....................................670 

52-634....................................670 

52-638....................................669 

52-644....................................668 

52-667....................................637 

52-671....................................667 

52-677....................................679 

52-679....................................679 

52-682....................................678 

52-684....................................678 

52-686....................................677 

52-806....................................643 

52-807....................................643 

52-808....................................643 

52-809....................................643 

52-810....................................643 

52-811....................................643 

52-812....................................643 

52-813....................................643 

52-814....................................643 

52-815....................................643 

52-816....................................643 

52-817....................................643 

52-818....................................643 

52-819....................................643 

52910KITN..............................916 

52910N...................................916 

53-009...................................742 

53-016....................................742 

53-019....................................742 

53-022...................................742 

53-025...................................742 

53-034...................................742 

53-046...................................742 

53-052....................................742 

53-055...................................742 

53-061...................................742 

53-064...................................742 

53-067...................................742 

53-082...................................742 

53-085...................................742 

53-091...................................742 

53-096...................................742 

53-106....................................742 

53-115....................................742 

53-119....................................742 

53-127....................................742 

53-142....................................742 

53-145....................................742 

53-162....................................742 

53-175....................................742 

532100GR...............................418 

532110GR...............................418 

532120GR...............................418 

532130GR...............................418 

532140GR...............................418 

532150GR...............................418 

532160GR...............................418 

532170GR...............................418 

532180GR...............................418 

532190GR...............................418 

53-270....................................735 

53-273....................................734 

53-616....................................728 

53-622...................................728 

53-634...................................728 

53-652...................................728 

53-661...................................728 

53-667...................................728 

53-685...................................728 

53-691....................................728 

53-715....................................728 

53-719....................................728 

53-727....................................728 

53-742....................................728 

53-762....................................728 

53-775....................................728 

53-843...................................725 

53-845...................................725 

5390435...............................1339 

5390635...............................1339 

5390695...............................1340 

5390835...............................1339 

5390895...............................1340 

5391035...............................1339 

5391095...............................1340 

5391235...............................1339 

5391295...............................1340 

5391435...............................1339 

5391495...............................1340 

5391635...............................1339 

5391695...............................1340 

5391835...............................1339 

5392035...............................1339 

5392095...............................1340 

5392235...............................1339 

5392295...............................1340 

5392435...............................1339 

5392495...............................1340 

5392835...............................1339 

5392895...............................1340 

5393235...............................1339 

5393295...............................1340 

5394035...............................1339 

5394095...............................1340 

5410335...............................1342 

5410405...............................1341 

5410435...............................1342 

5410505...............................1341 

5410535...............................1342 

5410605...............................1341 

5410635...............................1342 

5410695...............................1343 

5410705...............................1341 

5410735...............................1342 

5410805...............................1341 

5410835...............................1342 

5410895...............................1343 

54-110....................................647 

5411005...............................1341 

5411035...............................1342 

5411095...............................1343 

54-111....................................647 

54-112....................................647 

5411205................................1341 

5411235................................1342 

5411295................................1343 

54-113....................................647 

54-114....................................647 

5411405................................1341 

5411435...............................1342 

5411495................................1343 

54-115....................................647 

54-116....................................647 

5411605...............................1341 

5411635...............................1342 

5411695................................1343 

54-117....................................647 

54-118....................................647 

5411805................................1341 

5411835................................1342 

54-119....................................647 

5412005...............................1341 

5412035...............................1342 

5412095...............................1343 

5412205...............................1341 

5412235...............................1342 

5412295...............................1343 

5412405...............................1341 

5412435...............................1342 

5412495...............................1343 

5412805...............................1341 

5412835...............................1342 

5413205...............................1341 

5413235...............................1342 

5413295...............................1343 

5414035...............................1342 

5420505...............................1344 

5420605...............................1344 

5420705...............................1344 

5420805...............................1344 

542150GR...............................419 

542160GR...............................419 

542170GR...............................419 

542180GR...............................419 

542190GR...............................419 

542200GR..............................419 

542210GR...............................419 

542220GR..............................419 

542240GR..............................419 

542270GR..............................419 

542300GR..............................419 

542320GR..............................419 

5427CVN................................917 

5427N.....................................917 

5428CN...................................917 

5428CVN................................917 

5428N.....................................917 

5430535...............................1344 

5430635...............................1344 

5430835...............................1344 

5431035...............................1344 

5431635...............................1344 

5432.......................................866 

54-322....................................730 

54-334...................................730 

54-352....................................730 

54-355....................................730 

54-361....................................730 

54-367....................................730 

5437CEN................................917 

54-385...................................730 

5438CEN................................917 

54-391....................................730 

54-406...................................730 

54-415....................................730 

54-418....................................730 

54-419....................................730 

54-433...................................730 

54-445...................................730 

54-462...................................730 

54-475....................................730 

54-508...................................646 

54-509...................................646 

54-510....................................646 

54-511....................................646 

54-512....................................646 

54-513....................................646 

54-514....................................646 

54-515....................................646 

54-516....................................646 

54-517....................................646 

54-518....................................646 

54-519....................................646 

54-520....................................646 

54-521....................................646 

54-522....................................646 

54-523....................................646 

54-573....................................726 

54-587....................................732 

54-590...................................732 

54-593...................................732 

54-596...................................732 

54-599...................................732 

54-602...................................732 

54-605...................................732 

54-607...................................640 

54-608...................................645 

54-609...................................638 

54-637...................................731 

54-640...................................731 

54-643...................................731 

54-646...................................731 

54-649...................................731 

54-652...................................731 

54-655...................................731 

54-668...................................644 

54-808...................................641 

54-809...................................641 

54-810....................................641 

54-811....................................641 

54-812....................................641 

54-813....................................641 

54-814....................................641 

54-815....................................641 

54-816....................................641 

54-817....................................641 

54-818....................................641 

54-819....................................641 

54-902...................................745 

54-906...................................745 

54-907....................................745 

54-908...................................745 

54-909...................................745 

54-910....................................745 

54-911....................................745 

54-941....................................739 

54-950...................................635 

550.........................................866 

5506D...................................1244 

5514D...................................1244 

552.......................................1065 

55-215.................................... 747 

55-216.................................... 747 

55-217.................................... 747 

55-218.................................... 747 

5522D...................................1244 

55-307....................................749 

55-308....................................749 

55-309....................................749 

5530D...................................1244 

55-310....................................749 

55-311....................................749 

55-312....................................749 

55-313....................................749 

55-314....................................749 

55-315....................................749 

55-316....................................749 

55-317....................................749 

55-318....................................749 

55-319....................................749 

55-321....................................749 

55-322....................................749 

55-323....................................749 

55-324....................................749 

55-386....................................748 

56......................................... 1129 

56004D...................................537 

56008D...................................539 

56009D...................................542 

56011D...................................534 

56013D...................................544 

56014.....................................542 

56015D...................................539 

56018D...................................547 

56026.....................................535 

56028D...................................535 

56030.....................................537 

56032.....................................535 

56034.....................................549 

56036D...................................538 

56038.....................................538 

56064.....................................560 

56066.....................................530 

56067.....................................530 

56070D...................................530 

56072D...................................534 

56073D...................................531 

56074.....................................531 

56076.....................................532 

56077.....................................533 

56080.....................................536 

56081.....................................543 

56083.....................................546 

56085.....................................546 

56093.....................................562 

56100.....................................538 

5610405...............................1402 

5610605...............................1402 

56108.....................................536 

5610805...............................1402 

56110......................................550 

5611005...............................1402 

56112......................................567 

5611205...............................1402 

56114......................................530 

56115......................................531 

5611605...............................1402 

56122D...................................537 

56128D...................................543 

56130.....................................564 

56131.....................................565 

56132.....................................565 

56134.....................................564 

56148.....................................545 

56149.....................................547 

56150.....................................545 

56152.....................................544 

56161.....................................561 

5616215...............................1402 

56163.....................................560 

56164.....................................561 

5616615...............................1402 

5616616...............................1402 

56190.....................................554 

56191.....................................556 

56192.....................................554 

56193.....................................554 

56194.....................................556 

56196.....................................555 

56198.....................................556 

56-206....................................700 

56-207....................................700 

56-208....................................700 

56-209....................................700 

56-210....................................700 

56-211....................................700 

56-212....................................700 

56-213....................................700 

56-214....................................700 

56-215....................................700 

56-216....................................700 

5621615...............................1392 

56-217....................................700 

56-218....................................700 

56-219....................................700 

56-220....................................700 

56-221....................................700 

56-222....................................700 

56-223....................................700 

56-224....................................700 

5624415...............................1392 

5624615...............................1392 

5624815...............................1392 

5625015...............................1392 

5625215...............................1392 

5625415...............................1392 

56255D...................................568 

56256D...................................571 

56257D...................................569 

56258.....................................571 

56259.....................................569 

56260.....................................572 

56-306...................................709 

56-307....................................709 

56-308....................................709 

56-309...................................709 

56-310....................................709 

56-311....................................709 

56-312....................................709 

56-313....................................709 

56314.....................................530 

56-314....................................709


I N D E X 19 

1436 

56-315....................................709 

56316.....................................530 

56-316....................................709 

56-317....................................709 

56318.....................................533 

56-318....................................709 

56-319....................................709 

56320.....................................534 

56-320....................................709 

56321.....................................530 

56-321....................................709 

56-322....................................709 

56323.....................................530 

56-323....................................709 

56-324....................................709 

56-325....................................709 

56346.....................................527 

56347.....................................527 

56348.....................................527 

56349.....................................527 

56360.....................................530 

56362.....................................534 

56382.....................................528 

56391.....................................531 

56392.....................................533 

56395.....................................532 

56-406...................................707 

56-407...................................707 

56-408...................................707 

56-409...................................707 

56-410....................................707 

56-411....................................707 

56-412....................................707 

56-413....................................707 

56-414....................................707 

56-415....................................707 

56-416....................................707 

5641615...............................1390 

56-417....................................707 

56-418....................................707 

56-419....................................707 

56-420....................................707 

56-421....................................707 

56-422...................................707 

56-423....................................707 

56-424....................................707 

56-425....................................707 

5645415...............................1390 

5646415...............................1390 

5646495...............................1390 

5646615...............................1390 

5646695...............................1390 

5646815...............................1390 

5646895...............................1390 

5647015...............................1390 

5647215...............................1390 

5648495...............................1393 

5648695...............................1393 

5648895...............................1393 

5649095...............................1393 

56600G...................................553 

56601G...................................553 

56602G...................................552 

56603G...................................544 

56604G...................................552 

56605G...................................547 

56606G...................................546 

56609G...................................542 

56-611....................................690 

56612G...................................555 

56615G...................................555 

5661615......................1391-1392 

56618G...................................553 

5662015......................1391-1392 

56620G...................................547 

56622G...................................528 

56624G...................................528 

56626G...................................529 

56-628...................................681 

56628G...................................529 

56632G...................................528 

56634G...................................529 

56636G...................................531 

56638G...................................531 

56640G...................................532 

56642G...................................532 

5664415......................1391-1392 

56644G...................................532 

5664615......................1391-1392 

5664815......................1391-1392 

56648G...................................533 

5665015......................1391-1392 

56650G...................................559 

5665215......................1391-1392 

56652G...................................559 

5665415......................1391-1392 

56656G...................................558 

56660G...................................559 

5682215...............................1395 

5682315...............................1395 

5682415...............................1395 

5682515...............................1395 

5682615...............................1395 

5682715...............................1395 

5683215...............................1394 

5683315...............................1394 

5683315VW..........................1395 

5683415...............................1394 

5683415VW..........................1395 

5683515...............................1394 

5683515VW..........................1395 

5683615...............................1394 

5683615VW..........................1395 

5683715...............................1394 

5685615...............................1394 

5687015...............................1394 

5687215...............................1394 

56882.....................................548 

56897.....................................533 

56900.....................................548 

56901.....................................539 

57002D...................................540 

57004D...................................540 

57006.....................................540 

57008D...................................540 

57010.....................................540 

57012.....................................540 

57013D...................................540 

57014D...................................540 

57018.....................................540 

57020D...................................540 

57022.....................................540 

57024.....................................540 

57026D...................................540 

57028.....................................540 

57030D...................................540 

57031D...................................540 

57032D...................................540 

57034D...................................540 

57036.....................................540 

57038D...................................540 

57040D...................................540 

57042.....................................540 

57044.....................................540 

57046.....................................540 

57116......................................541 

57118......................................541 

57120.....................................541 

57122.....................................541 

57124......................................541 

57126.....................................541 

57128.....................................541 

57129.....................................541 

57130.....................................541 

57131......................................541 

57132.....................................541 

57133.....................................541 

57134.....................................541 

57135.....................................541 

57138.....................................541 

57142.....................................541 

57143.....................................541 

57197.....................................574 

57199.....................................574 

57201.....................................574 

57203.....................................574 

57205.....................................574 

57207.....................................574 

57209.....................................574 

57211.....................................574 

57213.....................................574 

57215.....................................574 

5724415...............................1400 

5724615...............................1400 

5724815...............................1400 

5725015...............................1400 

5725215...............................1400 

57300.....................................562 

57302.....................................562 

57304.....................................562 

57306.....................................562 

57308.....................................562 

57310.....................................562 

57312.....................................562 

57314.....................................562 

57316.....................................562 

57318.....................................562 

57320.....................................570 

57321.....................................570 

57322.....................................570 

57323.....................................570 

57324.....................................570 

57325.....................................570 

57326.....................................570 

57327.....................................570 

57328.....................................570 

57329.....................................570 

57400.....................................573 

57402.....................................573 

57404.....................................573 

57406.....................................573 

57408.....................................573 

57410......................................573 

57412......................................573 

57414......................................573 

57416......................................573 

5746415................................1399 

5746495...............................1399 

5746615...............................1399 

5746695...............................1399 

5746815...............................1399 

5746895...............................1399 

5747015................................1399 

5747095...............................1399 

5747215................................1399 

5747295...............................1399 

5748495...............................1401 

5748695...............................1401 

5748895...............................1401 

5749095...............................1401 

57500.....................................567 

57502.....................................567 

57504.....................................567 

57506.....................................567 

57508.....................................567 

57510......................................567 

57602.....................................566 

57604.....................................566 

57606.....................................566 

57608.....................................566 

57610.....................................566 

57612.....................................566 

57616.....................................566 

57632.....................................566 

57634.....................................566 

57636.....................................566 

57638.....................................566 

57640.....................................566 

57642.....................................566 

57644.....................................566 

5770315...............................1398 

5771615...............................1398 

5772015...............................1398 

5779125...............................1398 

5779135...............................1398 

5779145...............................1398 

5779155...............................1398 

5779165...............................1398 

5779175...............................1398 

57830.....................................568 

57832.....................................568 

57834.....................................568 

57836.....................................568 

57838.....................................568 

57840.....................................568 

57841.....................................563 

5784165...............................1398 

57842.....................................563 

57844.....................................563 

5784425...............................1398 

5784435...............................1398 

5784445...............................1398 

5784455...............................1398 

5784465...............................1398 

57846.....................................563 

57848.....................................563 

57850.....................................563 

57860.....................................570 

57861.....................................570 

57862.....................................570 

57863.....................................570 

57864.....................................570 

57865.....................................570 

57866.....................................570 

57867.....................................570 

5788495......................1393,1401 

5788695......................1393,1401 

5788895......................1393,1401 

5789095......................1393,1401 

57900.....................................574 

57902.....................................574 

57904.....................................574 

57906.....................................574 

57908.....................................574 

57910.....................................574 

57912.....................................574 

57914.....................................574 

57918.....................................574 

57920.....................................574 

57926.....................................574 

57942.....................................574 

57981.....................................541 

57982.....................................541 

57983.....................................541 

57984.....................................541 

5798495...............................1394 

57985.....................................541 

57986.....................................541 

5798695...............................1394 

57987.....................................541 

57988.....................................541 

5798895...............................1394 

57989.....................................541 

57990.....................................541 

5799095...............................1394 

57991.....................................541 

57992.....................................541 

57993.....................................541 

57994.....................................541 

58001D...................................549 

58002.....................................549 

58003.....................................549 

5800324............................... 1312 

58004.....................................549 

58005D...................................549 

58006D...................................549 

58007.....................................549 

5800724............................... 1312 

5800924............................... 1312 

5801024............................... 1312 

58010D...................................549 

5801124................................ 1312 

58012.....................................549 

58014.....................................549 

58016.....................................549 

58018.....................................549 

58020.....................................549 

58022.....................................549 

58023.....................................549 

58024.....................................549 

58026.....................................549 

58028.....................................549 

58030.....................................549 

58032.....................................549 

58034.....................................549 

58048.....................................551 

58049.....................................551 

58050.....................................551 

58052.....................................551 

58054.....................................551 

58056.....................................551 

58058.....................................551 

58060.....................................551 

58062.....................................551 

58063.....................................551 

58064.....................................551 

58066.....................................551 

58068.....................................551 

58070.....................................550 

58072.....................................550 

58073.....................................550 

58074.....................................550 

58075.....................................550 

58076.....................................550 

58078.....................................550 

58080.....................................550 

58082.....................................550 

58086.....................................550 

58090.....................................551 

58092.....................................551 

58094.....................................551 

58200.....................................551 

58202.....................................551 

58204.....................................551 

58206.....................................551 

58208.....................................551 

58210.....................................551 

58212.....................................551 

58250.....................................563 

58252.....................................563 

58254.....................................563 

58256.....................................563 

58258.....................................563 

58260.....................................563 

58262.....................................563 

58264.....................................563 

58266.....................................563 

58268.....................................563 

58270.....................................572 

58271.....................................572 

58272.....................................572 

58273.....................................572 

58274.....................................572 

58275.....................................572 

58276.....................................572 

58277.....................................572 

58278.....................................572 

58279.....................................572 

58280.....................................573 

58281.....................................573 

58282.....................................573 

58283.....................................573 

58284.....................................573 

58285.....................................573 

58286.....................................573 

58287.....................................573 

584.......................................1065 

58400.....................................567 

58402.....................................567 

58404.....................................567 

58406.....................................567 

58408.....................................567 

58410.....................................567 

58412.....................................567 

58414.....................................567


58416.....................................567 

58418.....................................567 

586.......................................1066 

58712...................................1059 

58926.....................................552 

58927.....................................552 

58928.....................................552 

58929.....................................552 

58930.....................................552 

58931.....................................552 

590.......................................1059 

59-032...................................759 

59-036...................................759 

59-041D.................................759 

59-046D.................................759 

59-050D.................................759 

59-055...................................759 

59-060D.................................759 

59-065...................................759 

59-070....................................759 

59-075....................................759 

59-080...................................759 

590G.....................................1059 

590GM..................................1059 

590GME................................1059 

59100.....................................558 

59101.....................................558 

59102.....................................558 

59104.....................................558 

59106.....................................558 

59107.....................................558 

59108.....................................558 

59110......................................558 

59112......................................558 

59113......................................558 

59114......................................558 

59115......................................558 

59116......................................558 

59117......................................558 

59118......................................558 

59120.....................................558 

59122.....................................558 

59124......................................558 

59300.....................................557 

59302.....................................557 

59304.....................................557 

59306.....................................557 

59308.....................................557 

59310.....................................557 

59312.....................................557 

59314.....................................557 

59316.....................................557 

59318.....................................557 

59320.....................................557 

59322.....................................557 

59324.....................................557 

59326.....................................557 

59328.....................................557 

59330.....................................557 

59332.....................................557 

59-332....................................761 

59334.....................................557 

59-336....................................761 

59-341....................................761 

59-346...................................761 

59-350....................................761 

59-355....................................761 

59-360....................................761 

59-365....................................761 

59-370....................................761 

59-375....................................761 

59-380....................................761 

5970820...............................1308 

5971230...............................1304 

5973000...............................1304 

5973310...............................1304 

5977001...............................1304 

5977011...............................1304 

5977020...............................1304 

5977206CBL........................1304 

5977405CBL.........................1304 

5977410CBL.........................1304 

5977502...............................1304 

5977510...............................1304 

5977522...............................1304 

5977610CBL.........................1304 

5977920...............................1307 

5978000...............................1304 

5979600...............................1304 

5979610...............................1304 

5979630...............................1304 

6010898............................... 1316 

6011898............................... 1316 

6012IN..................................1069 

6050314............................... 1316 

6050324............................... 1316 

6050414...............................1316 

6050424............................... 1316 

6050514............................... 1316 

6050614...............................1316 

6050624............................... 1316 

6051014............................... 1316 

6052414............................... 1316 

6052418............................... 1316 

6052814............................... 1316 

6053614............................... 1316 

6055888............................... 1316 

6055988...............................1316 

605N.......................................949 

6101024................................ 1312 

6101224................................ 1312 

6102024............................... 1312 

6104024............................... 1312 

61059................................... 1167 

6106024............................... 1312 

6106124................................ 1312 

6106224............................... 1312 

6107014................................ 1312 

6107224............................... 1312 

6108024............................... 1312 

6108114................................ 1312 

6108424............................... 1312 

6200.....................................1246 

6203205............................... 1311 

6203603............................... 1311 

6203604............................... 1311 

6203605............................... 1311 

6204D...................................1247 

6206D...................................1246 

6207504............................... 1311 

6207506............................... 1311 

6207803............................... 1311 

6207805............................... 1311 

6208D...................................1247 

6214D...................................1246 

6219D...................................1247 

621FT...................................1069 

6223.....................................1245 

6228.....................................1245 

622FT...................................1069 

6230.....................................1245 

6232D...................................1246 

623FT...................................1069 

624FT...................................1069 

6250101...............................1363 

6250103...............................1363 

6250105...............................1363 

6250106...............................1363 

6250107...............................1363 

6250111................................1363 

6250302...............................1364 

6250303...............................1364 

6250305...............................1364 

6250306...............................1364 

6250307...............................1364 

6250309...............................1364 

6250313...............................1364 

6250315...............................1364 

6250324...............................1364 

6250328...............................1364 

6250403...............................1366 

6250405...............................1366 

6250406...............................1366 

6250407...............................1366 

6250409...............................1366 

6250427...............................1366 

6250501...............................1365 

6250502...............................1365 

6250503...............................1365 

6250505...............................1365 

6250506...............................1365 

6250507...............................1365 

6250510...............................1365 

6250511...............................1365 

6250513...............................1365 

6250514...............................1365 

6250515...............................1365 

6250516...............................1365 

6250519...............................1365 

6250520...............................1365 

6250521...............................1365 

6250522...............................1365 

6250523...............................1365 

6250524...............................1365 

6250527...............................1365 

6250528...............................1365 

6250529...............................1365 

6250533...............................1365 

6250534...............................1365 

6255D...................................1246 

6260201...............................1359 

6260202...............................1359 

6260203...............................1359 

6260205...............................1359 

6260206...............................1359 

6260207...............................1359 

6260208...............................1359 

6260209...............................1359 

6260210...............................1359 

6260301...............................1358 

6260302...............................1358 

6260303...............................1358 

6260304...............................1358 

62635.....................................994 

62659.....................................994 

626FT...................................1069 

626LN...................................1067 

62706.....................................994 

62723.....................................994 

62749.....................................994 

62776.....................................994 

6279D...................................1246 

62811......................................994 

6281D...................................1246 

62826.....................................994 

62830.....................................994 

62832.....................................994 

62835L...................................994 

62836L...................................994 

62838.....................................994 

62839.....................................994 

6283D...................................1247 

6287D...................................1247 

6289D...................................1247 

6291.....................................1246 

6295D...................................1245 

6309D...................................1245 

63103.....................................995 

63112......................................995 

6312035............................... 1311 

6312036............................... 1311 

63145.....................................995 

6314D...................................1246 

63158.....................................995 

6316D...................................1246 

63220.....................................995 

63256.....................................995 

63268.....................................995 

63280.....................................995 

64-002...................................797 

64-005...................................797 

6402104...............................1343 

6402106...............................1343 

6402107...............................1343 

6402108...............................1343 

6402110...............................1343 

6402112...............................1343 

6402406...............................1340 

6402408...............................1340 

6402410...............................1340 

6403002...............................1337 

6403003...............................1337 

6403004...............................1337 

6403006...............................1337 

6403008...............................1337 

64-031...................................789 

64-032...................................789 

64-038...................................789 

64-041....................................789 

64-042...................................789 

64-046...................................789 

64-049...................................789 

64-081...................................789 

64-082...................................789 

64-084...................................789 

64-085...................................789 

64-086...................................789 

64-089...................................789 

64-094...................................791 

64-095...................................791 

64-099...................................791 

6410101................................ 1410 

6410301............................... 1410 

6410401............................... 1411 

6410701............................... 1411 

6410702............................... 1411 

64-146....................................792 

64-186....................................792 

6420701...............................1407 

6420702...............................1407 

6420703...............................1407 

6420705...............................1407 

6421000...............................1408 

6421001...............................1408 

6421002...............................1408 

6421701...............................1409 

6421801...............................1409 

6421802...............................1409 

6421803...............................1409 

6421805...............................1409 

6421806...............................1409 

6422001...............................1404 

6422002...............................1404 

6422012...............................1404 

64-221....................................794 

64-226....................................794 

6423000...............................1405 

6423005...............................1405 

6423010...............................1405 

6423015...............................1405 

6423100...............................1405 

6423105...............................1405 

6423108...............................1405 

6423110...............................1405 

6423500...............................1407 

6423505...............................1407 

6423510...............................1407 

64-236....................................794 

6423600...............................1406 

6423605...............................1406 

6423805...............................1406 

6423900...............................1406 

6423905...............................1406 

6423920...............................1405 

6423923...............................1405 

6423925...............................1405 

64-302....................................795 

64-352....................................795 

64-355...................................795 

64-358...................................795 

64-402...................................795 

64-405...................................795 

64-407...................................795 

64-452...................................796 

64-455...................................795 

64-458...................................795 

64-502...................................796 

64-505...................................796 

64-534...................................793 

64-544...................................793 

64-623...................................803 

64-637...................................803 

64-647...................................803 

64-657...................................803 

646LN...................................1068 

64-700....................................798 

64-710....................................799 

64-713....................................799 

64-715....................................799 

64-718....................................799 

64-720....................................794 

64-730....................................794 

64-740....................................794 

64-750....................................798 

64-752....................................799 

64-753....................................799 

64-754....................................799 

64-755....................................799 

64-756....................................799 

64-757....................................799 

64-758....................................799 

64-770....................................800 

64-771....................................800 

64-772....................................800 

64-773....................................800 

64-774....................................800 

64-775....................................800 

64-776....................................800 

64-777....................................800 

64-778....................................800 

64-779....................................800 

64-780....................................800 

64-830...................................800 

64-832...................................801 

64-833...................................801 

64-834...................................802 

64-836...................................802 

64-902...................................797 

64-905...................................797 

64-931....................................790 

64-932....................................790 

64-938...................................790 

64-941....................................790 

64-942...................................790 

64-946...................................790 

64-949...................................790 

64-954...................................793 

64-958...................................793 

64-981....................................790 

64-982....................................790 

64-984...................................790 

64-985...................................790 

64-986...................................790 

64-989...................................790 

64-994...................................791 

64-995...................................791 

64-999...................................791 

6500140............................... 1411 

6500141............................... 1411 

6501000...............................1409 

6501010...............................1409 

6501011...............................1409 

6501012...............................1409 

6501020...............................1409 

6501021...............................1409 

6501022...............................1409 

6501101...............................1409 

6501111................................1409 

6501700............................... 1410 

6505011............................... 1410 

6506000...............................1406 

6506001...............................1406 

6506010...............................1406 

6506011...............................1406 

6506020...............................1406 

19 

I N D E X 

1437


I N D E X 19 

1438 

6506021...............................1406 

6506030...............................1406 

6506031...............................1406 

6506050...............................1406 

6506051...............................1406 

6506060...............................1407 

6506061...............................1407 

6506070...............................1407 

6506071...............................1407 

6506200...............................1404 

6506201...............................1404 

6506210...............................1404 

6506211...............................1404 

6506220...............................1404 

6506221...............................1404 

6507030...............................1408 

6507031...............................1408 

6507032...............................1408 

6507050...............................1408 

6507051...............................1408 

6507052...............................1408 

6507080...............................1408 

6507081...............................1408 

6507082...............................1408 

6507083...............................1408 

6546CVSMLN.........................918 

6546N.....................................918 

6546SCN................................918 

6547CVN................................918 

6547N.....................................918 

66-102....................................843 

66-103....................................843 

66-105....................................843 

66-106....................................843 

66-108....................................843 

66-109....................................843 

66-150....................................846 

66-152....................................847 

66-153....................................845 

66-155....................................845 

66-156....................................845 

66-158....................................845 

66-161....................................845 

66-164....................................845 

66-202....................................846 

66-203....................................842 

66-205....................................842 

66-208....................................842 

66-209....................................842 

66-211....................................842 

66-212....................................842 

66-214....................................842 

66-217....................................842 

66-220....................................842 

66-221....................................842 

66-223....................................842 

66-224....................................842 

66-226....................................842 

66-230....................................845 

66-232....................................845 

6624.....................................1257 

6625.....................................1257 

66-253....................................846 

66-255....................................844 

66-256....................................844 

66-258....................................844 

66-259....................................844 

6626.....................................1257 

66-261....................................844 

66-262....................................844 

66-265....................................844 

66-267....................................844 

66-268....................................844 

66-270....................................844 

66-271....................................844 

6627D...................................1257 

6628.....................................1257 

66-321....................................847 

66-323....................................847 

66-324....................................847 

66-326....................................847 

66-327....................................847 

66-329....................................847 

66-330...................................847 

66-332....................................847 

66-400...................................832 

66-402...................................832 

66-404...................................832 

66-440...................................831 

66-441....................................831 

66-443...................................831 

66-445...................................831 

66-501....................................834 

66-502...................................834 

66-504...................................834 

66-505...................................834 

66-507....................................834 

66-509...................................834 

66-510....................................834 

66-521....................................835 

66-524....................................835 

66-526....................................835 

66-527....................................835 

66-528....................................835 

66-530...................................835 

66-541....................................834 

66-544...................................834 

66-546...................................834 

66-547....................................834 

66-550...................................834 

66-553...................................834 

66-561....................................835 

66-563...................................835 

66-564...................................835 

66-567...................................835 

66-570....................................835 

66-580...................................848 

66-598...................................848 

66-601...................................849 

66-603...................................849 

66-604...................................840 

66-605...................................849 

66-606...................................838 

66-607...................................849 

66-608...................................839 

66-609...................................848 

66-610....................................838 

66-611....................................836 

66-612....................................832 

66-613....................................848 

66-614....................................833 

66-615....................................833 

66-618....................................839 

66-619....................................840 

66-620...................................837 

66-621...................................831 

66-626...................................837 

66-639...................................841 

66-706....................................856 

66-708....................................856 

66-710....................................856 

66-711....................................856 

66-712....................................856 

66-714....................................856 

66-716....................................856 

66-731....................................856 

66-733....................................856 

66-734....................................856 

66-735....................................856 

66-736....................................856 

66-737....................................856 

66-738....................................856 

66-743....................................855 

66-747....................................855 

66-806...................................853 

66-806A.................................854 

66-807...................................853 

66-808...................................853 

66-808A.................................854 

66-809...................................853 

66-810....................................853 

66-810A..................................854 

66-811....................................853 

66-811A..................................854 

66-812....................................853 

66-812A.................................854 

66-814....................................853 

66-814A..................................854 

66-816....................................853 

66-816A..................................854 

66-818....................................853 

66-820...................................853 

66-829...................................853 

66-831....................................853 

66-831A.................................854 

66-832...................................853 

66-833...................................853 

66-833A.................................854 

66-834...................................853 

66-834A.................................854 

66-835...................................853 

66-835A.................................854 

66-836...................................853 

66-836A.................................854 

66-837...................................853 

66-837A..................................854 

66-838...................................853 

66-838A.................................854 

66-839...................................853 

66-840...................................853 

66-843...................................850 

66-843A.................................852 

66-845...................................850 

66-847....................................851 

66-847A..................................852 

66-848...................................851 

66-921....................................849 

66-924....................................849 

66-927...................................849 

66-933...................................849 

66-936...................................849 

66-943...................................849 

66-962...................................848 

67-063....................................892 

67-065....................................892 

67-067....................................892 

67-069....................................892 

67-071....................................893 

67-101....................................889 

67-103....................................890 

67-109....................................890 

67-113.....................................890 

67-123....................................889 

67-155....................................891 

67-159....................................891 

67-161....................................891 

67-163....................................891 

67-173....................................891 

67-175....................................891 

67-183....................................891 

67-184....................................891 

67-195....................................892 

67-197....................................892 

67-240....................................894 

67-241....................................894 

67-253....................................895 

67-255....................................895 

67-257....................................895 

67-259....................................895 

67-303....................................895 

67-305....................................895 

67-307....................................895 

67-323....................................897 

67-331....................................896 

67-357....................................896 

67-367....................................896 

67-369....................................897 

67-370....................................897 

67-401....................................896 

67-404....................................899 

67-405....................................899 

67-407....................................899 

67-410....................................899 

67-436....................................900 

67-441....................................898 

67-457....................................900 

67-460....................................900 

67-503....................................898 

67-535....................................893 

67-555....................................900 

67-565....................................901 

67-657....................................887 

67-659....................................887 

67-661....................................887 

67-667....................................887 

67-669....................................887 

67-671....................................887 

67-687....................................888 

67-699....................................888 

67-717....................................886 

67-777....................................886 

67-779....................................886 

67-781....................................886 

67-783....................................886 

67-785....................................886 

67-789....................................886 

67-791....................................886 

67-830....................................886 

67-831....................................887 

67-850....................................901 

67-852....................................901 

67-889....................................901 

67-891....................................902 

67-895....................................902 

67-901....................................902 

67-905....................................903 

67-908....................................903 

67-910....................................903 

67-912....................................904 

67-917....................................904 

67-923....................................904 

67-927....................................904 

67-929....................................904 

67-935....................................904 

67-965....................................904 

67-971....................................904 

67-973....................................904 

67-977....................................904 

67-983....................................904 

68-001...................................906 

68-002...................................906 

68-003...................................906 

68-004...................................906 

68-005D.................................906 

68-006...................................906 

68-007D.................................906 

68-008D.................................906 

68-009...................................906 

68-010....................................906 

68-011D..................................906 

68-012....................................906 

68-015....................................906 

68-016....................................905 

68-045...................................907 

68-046...................................907 

68-047....................................907 

68-048...................................907 

68-049D.................................907 

68-050D.................................907 

68-056...................................907 

68-065D.................................908 

68-067...................................908 

68-069D.................................909 

68-070....................................909 

68-071....................................909 

68-074....................................909 

68-075....................................909 

68-076....................................909 

68-079....................................908 

68-080...................................910 

68-082...................................910 

68-083...................................910 

68-090...................................911 

68-092D.................................911 

68-095D.................................910 

68-097...................................910 

68-163....................................912 

68-171....................................912 

68-175....................................912 

68-177....................................913 

68-178....................................912 

68-179....................................913 

68-191....................................912 

68-199....................................911 

68-516..................................1094 

68-524..................................1094 

68-532..................................1094 

68-540.................................1094 

69-001.................................1098 

69-003.................................1098 

69-009.................................1098 

69-011..................................1098 

69-013..................................1098 

69-017..................................1098 

69-019..................................1098 

69-025.................................1098 

69-027.................................1098 

69-031..................................1098 

69-033.................................1098 

69-065.................................1098 

69-069.................................1098 

69-141..................................1099 

69-142..................................1099 

69-143..................................1099 

69-145..................................1099 

69-146..................................1099 

69-148..................................1099 

69-149..................................1099 

69-151..................................1099 

69-152..................................1099 

69-153..................................1099 

69-155..................................1099 

69-156..................................1099 

69-158..................................1099 

69-159..................................1099 

69-161..................................1099 

69-162..................................1099 

69-163..................................1099 

69-165..................................1099 

69-166..................................1099 

69-168..................................1099 

69-169..................................1099 

69-171..................................1099 

69-172..................................1099 

69-173..................................1099 

69-175..................................1099 

69-176..................................1099 

69-178..................................1099 

69-179..................................1099 

69-181..................................1099 

69-182..................................1099 

69-183..................................1099 

69-185..................................1099 

69-186..................................1099 

69-188..................................1099 

69-189..................................1099 

69-308..................................1093 

69-350..................................1092 

69-404.................................1092 

69-406.................................1092 

69-408.................................1092 

69-410..................................1092 

69-412..................................1092 

69-440.................................1092 

69-442.................................1092 

69-444.................................1092 

69-446.................................1092 

69-448.................................1092 

69-450.................................1092 

69-452.................................1092 

69-454.................................1092 

69-480.................................1098 

69-485.................................1098 

69-490.................................1097 

69-501..................................1096


69-503.................................1096 

69-505.................................1096 

69-507..................................1096 

69-513..................................1097 

69-515..................................1097 

69-517..................................1097 

69-530.................................1095 

69-531..................................1095 

69-532..................................1095 

69-533.................................1095 

69-534.................................1095 

69-540.................................1095 

69-541..................................1095 

69-542..................................1095 

69-543.................................1095 

69-547..................................1096 

69-550.................................1096 

69-551..................................1096 

69-552..................................1096 

69-554.................................1096 

69-605.................................1093 

69-621.................................1093 

69-623.................................1093 

69-625.................................1093 

69-643.................................1094 

69-645.................................1094 

69-647..................................1094 

69-649.................................1094 

69-651..................................1094 

69-653.................................1094 

69-655.................................1094 

6990234...............................1336 

6990334...............................1336 

6990434...............................1336 

6990534...............................1336 

6990634...............................1336 

6990734...............................1336 

6990834...............................1336 

6990934...............................1336 

6990FHL.................................962 

6990FS...................................962 

6990FSL.................................962 

6991034...............................1336 

6991234...............................1336 

6991434...............................1336 

6991634...............................1336 

6991834...............................1336 

6992034...............................1336 

6992434...............................1336 

6992835...............................1336 

6993235...............................1336 

70-000................................. 1110 

7000197...............................1302 

7000227...............................1302 

7000327...............................1302 

7000397...............................1302 

7000426...............................1303 

7000427...............................1302 

7000497...............................1302 

7000626...............................1303 

7000627...............................1302 

7000697...............................1302 

7000826...............................1303 

7000827...............................1302 

7000897...............................1302 

7000927...............................1302 

70-041.................................. 1115 

70-042................................. 1115 

70-043................................. 1115 

70-044................................. 1115 

70-045................................. 1115 

70-047.................................. 1115 

70-049................................. 1115 

7008027...............................1303 

7008227...............................1303 

7008327...............................1303 

7008427...............................1303 

70-101.................................. 1116 

70-103.................................. 1116 

70-105.................................. 1116 

70-107.................................. 1116 

70-109.................................. 1116 

70-110.................................. 1114 

70-112.................................. 1114 

70-114.................................. 1114 

70-116.................................. 1114 

70-118.................................. 1114 

70-120.................................. 1114 

70-122.................................. 1114 

70-124.................................. 1114 

70-126.................................. 1114 

70-128.................................. 1114 

70-129.................................. 1116 

70-131.................................. 1116 

70-133.................................. 1116 

70-153.................................. 1118 

70-155.................................. 1118 

70-157D................................ 1118 

70-159.................................. 1118 

70-161.................................. 1118 

70-163.................................. 1118 

70-165.................................. 1118 

70-167.................................. 1118 

70-187.................................. 1117 

70-189.................................. 1117 

70-191.................................. 1117 

70-193.................................. 1117 

70-195.................................. 1117 

70-197.................................. 1117 

70-199.................................. 1117 

70-201.................................. 1117 

70-221.................................. 1118 

70-231.................................. 1118 

70-233.................................. 1118 

70-235.................................. 1118 

70-237.................................. 1118 

70-239.................................. 1118 

70-241.................................. 1118 

70-251.................................. 1119 

70-253.................................. 1119 

70-255.................................. 1119 

70-257.................................. 1119 

70-260.................................. 1117 

70-262.................................. 1117 

70-264.................................. 1117 

70-266.................................. 1117 

70-268.................................. 1117 

70-270.................................. 1117 

70-272.................................. 1117 

70-274.................................. 1117 

70-276.................................. 1117 

70-280.................................. 1117 

70-291.................................. 1116 

70-292.................................. 1119 

70-293.................................. 1116 

70-294.................................. 1116 

70-295.................................. 1115 

70-296.................................. 1115 

70-297.................................. 1119 

703.......................................1054 

70-301.................................. 1111 

70-303.................................. 1111 

70-305.................................. 1111 

70-307.................................. 1111 

70-309.................................. 1111 

70-311.................................. 1111 

70-313.................................. 1111 

70-315.................................. 1111 

70-317.................................. 1111 

70-319.................................. 1111 

70-325.................................. 1111 

70-329.................................. 1111 

70-331.................................. 1111 

70-333.................................. 1111 

70-335.................................. 1111 

70-337.................................. 1111 

70-347.................................. 1112 

70-353.................................. 1112 

70-357.................................. 1112 

70-361.................................. 1112 

70-367.................................. 1112 

70-369.................................. 1112 

70-391.................................. 1112 

70-393.................................. 1112 

70-395.................................. 1112 

70-397.................................. 1112 

70-399.................................. 1112 

703D.....................................1054 

70-419.................................. 1113 

70-421.................................. 1113 

70-423.................................. 1113 

70-425.................................. 1113 

70-427.................................. 1113 

70-447.................................. 1113 

70-449................................. 1113 

70-451.................................. 1113 

70-453................................. 1113 

70-481.................................. 1112 

70-501.................................. 1133 

70-503.................................. 1133 

70-505.................................. 1133 

70-507.................................. 1133 

70-509.................................. 1133 

70-511.................................. 1133 

70-515.................................. 1133 

70-517.................................. 1133 

70-519.................................. 1133 

70-521.................................. 1133 

70-531.................................. 1132 

70-533.................................. 1132 

70-535.................................. 1132 

70-537.................................. 1132 

70-539.................................. 1132 

70-545................................. 1110 

70-546................................. 1110 

70-550..................................1106 

70-552.................................. 1107 

70-553.................................. 1107 

70-554.................................1108 

70-556..................................1108 

70-557..................................1109 

70-559..................................1109 

70-560.................................1104 

70-562..................................1105 

70-563.................................1105 

70-564.................................1106 

70-565.................................1104 

70-567..................................1103 

70-568.................................1103 

70-578.................................. 1132 

70-579.................................. 1132 

706D.....................................1054 

706L.....................................1054 

70-790..................................1079 

70-801..................................1078 

70-803..................................1078 

70-807..................................1078 

70-811..................................1078 

70-815..................................1079 

70-817..................................1079 

70-819..................................1079 

70-827..................................1079 

70-920..................................1080 

70-921..................................1080 

70-923..................................1080 

70-925..................................1080 

70-927..................................1080 

70-929..................................1080 

70-933..................................1080 

70-935..................................1080 

70-943.................................1080 

70-950....................................991 

70-952....................................991 

70-954....................................991 

70-956....................................991 

70-958....................................991 

70-960...................................991 

70-962....................................991 

70-964...................................991 

70-966...................................991 

70-970....................................991 

7100103...............................1362 

7100105...............................1362 

7100106...............................1362 

7100107...............................1362 

7100108...............................1362 

7100109...............................1362 

7100111................................1362 

7105301...............................1362 

7105302...............................1362 

7105303...............................1362 

7105304...............................1362 

7150106...............................1361 

7150107...............................1361 

7150108...............................1361 

7150109...............................1361 

7150111................................1361 

7150112................................1361 

7150114................................1361 

7150115................................1361 

7150116................................1361 

7150117................................1361 

7150119................................1361 

7150120...............................1361 

7150121................................1361 

7150122...............................1361 

71573D.................990,1223,1240 

71574....................990,1223,1240 

71575D.................990,1223,1240 

715D.....................990,1223,1240 

7190C.....................................957 

7190HC...................................957 

7190NE...................................957 

7190TN...................................957 

7205336...............................1371 

7205434...............................1371 

7205435...............................1371 

7205436...............................1371 

7205535...............................1371 

7205536...............................1371 

7205635...............................1371 

7205636...............................1371 

7205835...............................1371 

7206836...............................1371 

7206934...............................1371 

7206935...............................1371 

7206936...............................1371 

7207035...............................1371 

7207036...............................1371 

7207135......................1369,1371 

7207136...............................1371 

7207335......................1369,1371 

7208534...............................1371 

7208536...............................1371 

7208636...............................1371 

7208736...............................1371 

7209803...............................1371 

720DD....................................989 

7220214......................1374-1375 

7222213......................1374-1375 

7222214......................1374-1375 

7231533...............................1372 

7231913................................1372 

7245335...............................1372 

7245336...............................1372 

7245434...............................1372 

7245435...............................1372 

7245836...............................1372 

7246935...............................1372 

7247135...............................1372 

7247136...............................1372 

7248535...............................1372 

7248936...............................1372 

7265486...............................1373 

7265686...............................1373 

7265696...............................1373 

7265886...............................1373 

7265896...............................1373 

7267186...............................1373 

7267196...............................1373 

7267396...............................1373 

7268796............................... 1374 

7269812...............................1372 

727CVN...................................923 

727VN.....................................923 

728CVN...................................923 

728VN.....................................923 

7299.....................................1252 

729CVN..................................923 

73...........................................866 

7300.....................................1252 

73-006...................................766 

73-008...................................766 

73-010....................................766 

73-012....................................766 

73-014....................................766 

73-018....................................766 

73-024....................................766 

7303.....................................1252 

73-036...................................766 

7304.....................................1252 

7306.....................................1252 

7307.....................................1252 

7308D...................................1252 

7309.....................................1252 

730D.....................................1193 

7311......................................1252 

7312......................................1252 

7313D...................................1252 

7314......................................1252 

7315......................................1252 

7316D...................................1252 

7317......................................1252 

7318......................................1252 

7319D...................................1252 

7320.....................................1252 

73-205....................................767 

73-207....................................767 

73-209....................................767 

7321.....................................1252 

73-211....................................767 

73-229....................................767 

7322D...................................1252 

73-231....................................767 

73-233....................................767 

73-235....................................767 

73-237....................................767 

7323D...................................1252 

7324D...................................1252 

7325.....................................1252 

7327.....................................1252 

7328D...................................1252 

7329.....................................1252 

7329919............................... 1374 

73-305....................................766 

73-310....................................766 

7336624...............................1375 

7339.....................................1254 

7339750...............................1375 

7339752...............................1375 

7339754...............................1375 

7339755...............................1375 

7339756...............................1375 

7339760...............................1375 

7339762...............................1375 

7339764...............................1375 

7339765...............................1375 

7339790...............................1375 

7339792...............................1375 

7339794...............................1375 

7340D...................................1254 

7341.....................................1254 

7342D...................................1254 

7343.....................................1254 

7344032...............................1376 

7344132...............................1376 

7344232...............................1376 

7344432...............................1376 

7344832...............................1376 

7345D...................................1253 

7346D...................................1253 

7347D...................................1253 

7348D...................................1253 

7349.....................................1253 

7350.....................................1253 

19 

I N D E X 

1439


I N D E X 19 

7350922...............................1376 

7351.....................................1253 

7351022...............................1376 

7351122................................1376 

7351722...............................1376 

7353.....................................1253 

7354D...................................1253 

7355.....................................1253 

7356.....................................1253 

7357.....................................1253 

7359.....................................1253 

7360122...............................1376 

7360222...............................1376 

7360522...............................1376 

7360922...............................1376 

7360D...................................1253 

7361.....................................1253 

7361022...............................1376 

7361222...............................1376 

7361224...............................1376 

7361234...............................1376 

7361422...............................1376 

7361432...............................1376 

7361522...............................1376 

7361722...............................1376 

7361733...............................1376 

7362.....................................1253 

7364D...................................1253 

7365.....................................1253 

7365522...............................1376 

7365622...............................1376 

7367.....................................1253 

7368.....................................1253 

7380101...............................1377 

7380300...............................1377 

7380601...............................1377 

7380602...............................1377 

7380603...............................1377 

7399058...............................1377 

7399158...............................1377 

74-010....................................766 

74-014....................................766 

74-018....................................766 

74-024....................................766 

74-036....................................766 

74-048....................................766 

7417D....................................1257 

7423......................................1257 

7424D...................................1257 

7425......................................1257 

7427CVN.................................917 

75000B...................................975 

7503506...............................1402 

7503506C.............................1402 

7506495......................1391,1400 

7506695...................... 1391,1400 

7506895......................1391,1400 

7507095......................1391,1400 

7507295......................1391,1400 

7508495...............................1309 

7508595...............................1309 

764.........................................947 

765.........................................947 

7670704...............................1328 

7670714...............................1328 

7670724...............................1328 

7670744...............................1328 

7679038...............................1327 

7692006............................... 1318 

7776CVN................................918 

7776SCN................................918 

7777CVN................................918 

78-000................................. 1141 

78-010.................................. 1141 

78-015.................................. 1141 

78-020.................................. 1141 

78-021.................................. 1141 

78-030................................. 1141 

78-031.................................. 1141 

78-040................................. 1141 

78-041.................................. 1141 

78-050................................. 1141 

78-051.................................. 1141 

78-060................................. 1141 

78-061.................................. 1141 

78-080................................. 1141 

78-081.................................. 1141 

78-090................................. 1141 

78-091.................................. 1141 

78-092................................. 1141 

78-093................................. 1141 

78-102.................................. 1142 

78-103.................................. 1142 

78-104.................................. 1142 

78-106D................................ 1142 

78-107.................................. 1142 

78-108.................................. 1142 

78-109.................................. 1142 

78-110.................................. 1142 

78-111.................................. 1142 

78-112.................................. 1142 

78-113.................................. 1142 

78-115.................................. 1142 

78-116.................................. 1142 

78-118.................................. 1142 

78-119.................................. 1142 

78-303..................................1143 

78-304..................................1143 

78-306..................................1143 

78-308..................................1143 

78-333..................................1143 

78-334..................................1143 

78-336..................................1143 

78-338..................................1143 

78-401..................................1144 

78-402..................................1144 

78-403..................................1144 

78-404.................................1144 

78-406.................................1144 

78-408.................................1144 

78-410..................................1144 

78-411..................................1144 

78-412..................................1144 

78-413..................................1144 

78-431..................................1144 

78-432..................................1144 

78-433.................................1144 

78-434.................................1144 

78-436.................................1144 

78-438.................................1144 

78-440.................................1144 

78-441..................................1144 

78-442..................................1144 

78-443.................................1144 

78-601..................................1145 

78-602.................................1145 

78-603.................................1145 

78-604.................................1145 

78-606.................................1145 

78-608.................................1145 

78-610..................................1145 

78-612..................................1145 

78-631..................................1146 

78-632..................................1146 

78-633.................................1146 

78-634.................................1146 

78-636.................................1146 

78-638.................................1146 

78-640.................................1146 

78-642..................................1146 

79-493.................................1150 

79-495.................................1150 

79-496.................................1150 

80000.....................................815 

80001.....................................815 

80004.....................................815 

80005.....................................815 

80006.....................................815 

80007.....................................815 

80009.....................................815 

80010D...................................815 

80011.....................................815 

80012D...................................814 

80013.....................................814 

80014.....................................814 

80015.....................................814 

80017.....................................814 

80018D...................................814 

80019D...................................814 

80020D...................................814 

80021.....................................814 

80022.....................................814 

80023.....................................814 

80024D...................................815 

80025.....................................815 

80026D...................................815 

80027.....................................815 

80028D...................................815 

80029.....................................815 

80031.....................................818 

80032.....................................818 

80033.....................................818 

80034.....................................817 

80035.....................................817 

80036.....................................817 

80037.....................................818 

80038.....................................818 

80039.....................................818 

80040.....................................818 

80041.....................................818 

80042D...................................818 

80043.....................................816 

80044.....................................816 

80045.....................................816 

80046.....................................816 

80047.....................................820 

80048.....................................820 

80049.....................................820 

80050.....................................811 

80051.....................................810 

80052.....................................812 

80053.....................................812 

80054.....................................813 

80055.....................................817 

80056.....................................817 

80057.....................................816 

80058.....................................870 

80059.....................................812 

80060.....................................811 

80061.....................................813 

80062.....................................877 

80063.....................................820 

80064.....................................813 

80065.....................................814 

80066.....................................810 

80072.....................................826 

80080.....................................820 

80081.....................................820 

80082.....................................820 

80083.....................................820 

80084.....................................821 

80085D...................................821 

80086.....................................815 

80087.....................................815 

80088.....................................815 

80089.....................................816 

80090.....................................816 

80091.....................................816 

80092.....................................816 

80100.....................................147 

80101.....................................433 

80104D...................................150 

80105.....................................150 

80106.....................................150 

80107.....................................150 

80108.....................................150 

80109.....................................150 

80110......................................150 

80111......................................150 

80112......................................150 

80113D...................................150 

80114D...................................150 

80115......................................153 

80115S...................................152 

80116D...................................153 

80116S...................................152 

80117......................................153 

80117S...................................152 

80118......................................153 

80118S...................................152 

80119......................................153 

80119S...................................152 

80120D...................................153 

80120S...................................152 

80121.....................................153 

80121S...................................152 

80122D...................................153 

80122S...................................152 

80123.....................................153 

80123S...................................152 

80124.....................................153 

80124S...................................152 

80125.....................................151 

80126.....................................151 

80127.....................................151 

80128.....................................151 

80129.....................................151 

80130.....................................151 

80131D...................................151 

80132.....................................151 

80133.....................................151 

80134.....................................151 

80135D...................................151 

80136.....................................151 

80137.....................................151 

80138.....................................154 

80138S...................................152 

80139.....................................154 

80139S...................................152 

80140.....................................154 

80140S...................................152 

80141......................................154 

80141S....................................152 

80142.....................................154 

80142S...................................152 

80143.....................................154 

80143S...................................152 

80144.....................................154 

80144S...................................152 

80145.....................................154 

80145S...................................152 

80146D...................................154 

80146S...................................152 

80147.....................................154 

80147S...................................152 

80148.....................................154 

80148S...................................152 

80149.....................................154 

80149S...................................152 

80150.....................................154 

80150S...................................152 

80151D...................................157 

80152.....................................157 

80153.....................................157 

80154.....................................157 

80155.....................................157 

80156.....................................157 

80157.....................................157 

80158.....................................157 

80159.....................................157 

80160.....................................157 

80161.....................................157 

80162.....................................157 

80163.....................................157 

80164.....................................157 

80165.....................................157 

80166.....................................157 

80167.....................................158 

80168.....................................158 

80169.....................................158 

80170.....................................996 

80170D...................................158 

80171.....................................158 

80172.....................................158 

80173.....................................158 

80174......................................158 

80175.....................................158 

80176.....................................996 

80176D...................................158 

80177D...................................158 

80178.....................................158 

80179.....................................158 

80180.....................................158 

80181.....................................158 

80182.....................................158 

80182N...................................996 

80183.....................................158 

80184.....................................158 

80185.....................................158 

80186.....................................159 

80187.....................................159 

80188D...................................159 

80189.....................................159 

80190.....................................159 

80191.....................................160 

80192.....................................160 

80193.....................................160 

80194.....................................160 

80195.....................................160 

80196.....................................160 

80197.....................................151 

80198.....................................151 

80199.....................................151 

80200.....................................151 

80201.....................................151 

80202.....................................151 

80203.....................................151 

80204.....................................151 

80205.....................................151 

80206.....................................151 

80207.....................................151 

80208.....................................151 

80209.....................................151 

80210.....................................150 

80211.....................................150 

80212.....................................150 

80213.....................................150 

80214.....................................150 

80215D...................................150 

80216.....................................150 

80217.....................................150 

80218.....................................150 

80219.....................................150 

80220.....................................153 

80221.....................................153 

80222.....................................153 

80223D...................................153 

80224.....................................153 

80225.....................................153 

80226.....................................153 

80227.....................................153 

80228.....................................153 

80229.....................................153 

80230.....................................154 

80231.....................................154 

80232.....................................154 

80233.....................................154 

80234.....................................154 

80235.....................................154 

80236.....................................154 

80237.....................................154 

80238.....................................154 

80239D...................................154 

80240.....................................154 

80241.....................................154 

80242.....................................154 

80243.....................................160 

80250.....................................155 

80251D...................................155 

80252.....................................155 

80253.....................................155 

80254.....................................155 

80255.....................................155 

80256.....................................155 

80257.....................................155 

1440


I N D E X 

19 

1441 

80258.....................................155 

80259.....................................155 

80260.....................................155 

80261.....................................155 

80262.....................................155 

80263.....................................997 

80263D...................................155 

80264.....................................155 

80265.....................................155 

80266.....................................155 

80267.....................................155 

80268.....................................155 

80269.....................................997 

80290.....................................150 

80299.....................................998 

80300.....................................131 

80300P...................................129 

80301.....................................132 

80302D...................................141 

80303.....................................139 

80304.....................................143 

80304S...................................142 

80305.....................................140 

80305S...................................139 

80306.....................................142 

80307D...................................140 

80308.....................................143 

80309.....................................998 

80309D...................................141 

80310D...................................144 

80311.....................................144 

80312DD.................................133 

80313.....................................134 

80314D...................................138 

80315.....................................130 

80320.....................................157 

80321.....................................156 

80322.....................................156 

80323.....................................156 

80324.....................................137 

80325.....................................135 

80326.....................................137 

80327.....................................136 

80330.....................................228 

80331.....................................228 

80332.....................................228 

80333.....................................232 

80334.....................................232 

80335.....................................232 

80336.....................................232 

80337.....................................232 

80338.....................................232 

80339.....................................232 

80340.....................................232 

80341.....................................232 

80342.....................................232 

80343.....................................232 

80344.....................................232 

80345.....................................232 

80346.....................................232 

80347.....................................232 

80348.....................................232 

80349.....................................232 

80350.....................................227 

80351.....................................227 

80352.....................................227 

80353.....................................227 

80354.....................................227 

80355.....................................227 

80356.....................................227 

80357.....................................227 

80358.....................................227 

80359.....................................227 

80360.....................................227 

80361.....................................227 

80362.....................................227 

80363.....................................230 

80363S...................................229 

80364.....................................230 

80364S...................................229 

80365.....................................230 

80365S...................................229 

80366.....................................230 

80366S...................................229 

80367.....................................230 

80367S...................................229 

80368.....................................230 

80368S...................................229 

80369.....................................230 

80369S...................................229 

80370D...................................230 

80370S...................................229 

80371.....................................230 

80371S...................................229 

80372.....................................230 

80372S...................................229 

80373.....................................230 

80373S...................................229 

80374.....................................228 

80375.....................................228 

80376.....................................228 

80377.....................................228 

80378.....................................228 

80379.....................................228 

80380.....................................228 

80381.....................................228 

80382.....................................228 

80383.....................................228 

80384.....................................228 

80385.....................................228 

80386.....................................228 

80387.....................................228 

80388.....................................231 

80388S...................................229 

80389.....................................231 

80389S...................................229 

80390.....................................231 

80390S...................................229 

80391.....................................231 

80391S...................................229 

80392.....................................231 

80392S...................................229 

80393D...................................231 

80393S...................................229 

80394D...................................231 

80394S...................................229 

80395.....................................231 

80395S...................................229 

80396.....................................231 

80396S...................................229 

80397.....................................231 

80397S...................................229 

80398.....................................231 

80398S...................................229 

80399.....................................231 

80399S...................................229 

80400.....................................231 

80400S...................................229 

80401.....................................231 

80401S...................................229 

80402.....................................224 

80403.....................................224 

80404.....................................224 

80405.....................................224 

80406.....................................231 

80407.....................................231 

80408.....................................231 

80409.....................................231 

80410.....................................235 

80411......................................235 

80412D...................................235 

80413.....................................235 

80414.....................................235 

80415D...................................235 

80416.....................................235 

80417.....................................235 

80418.....................................235 

80419.....................................235 

80420.....................................235 

80421.....................................235 

80422.....................................235 

80423.....................................235 

80424.....................................235 

80425.....................................235 

80426.....................................235 

80427.....................................235 

80428D...................................235 

80429.....................................235 

80430.....................................235 

80431.....................................235 

80432.....................................235 

80433.....................................235 

80434.....................................237 

80435.....................................237 

80436D...................................237 

80437.....................................237 

80438.....................................237 

80439.....................................237 

80440.....................................237 

80441.....................................237 

80442.....................................237 

80443.....................................237 

80444.....................................237 

80445.....................................237 

80446.....................................237 

80447.....................................237 

80448.....................................237 

80449.....................................237 

80450.....................................237 

80451.....................................238 

80452.....................................238 

80453.....................................238 

80454.....................................238 

80455.....................................238 

80456D...................................238 

80457.....................................238 

80458.....................................238 

80459.....................................238 

80460.....................................239 

80461.....................................239 

80462.....................................239 

80463.....................................239 

80464.....................................240 

80465.....................................240 

80466.....................................240 

80467.....................................240 

80468.....................................240 

80469.....................................240 

80470.....................................240 

80471.....................................160 

80472.....................................160 

80473.....................................160 

80474.....................................160 

80475.....................................160 

80476.....................................160 

80477.....................................240 

80478.....................................240 

80479D...................................240 

80480.....................................160 

80481.....................................239 

80482.....................................228 

80483.....................................228 

80484.....................................228 

80485.....................................228 

80486.....................................228 

80487.....................................228 

80488.....................................228 

80489.....................................228 

80490.....................................228 

80491.....................................228 

80492.....................................228 

80493.....................................228 

80494.....................................228 

80495.....................................228 

80496.....................................227 

80497D...................................227 

80498.....................................227 

80499.....................................227 

80500D...................................227 

80501.....................................227 

80502.....................................227 

80503.....................................227 

80504.....................................227 

80505.....................................227 

80506D...................................227 

80507.....................................227 

80508.....................................227 

80509.....................................230 

80510D...................................230 

80511.....................................230 

80512.....................................230 

80513.....................................230 

80514.....................................230 

80515D...................................230 

80516.....................................230 

80517.....................................230 

80518.....................................230 

80519.....................................230 

80520D...................................231 

80521.....................................231 

80522.....................................231 

80523.....................................231 

80524.....................................231 

80525.....................................231 

80526.....................................231 

80527.....................................231 

80528.....................................231 

80529.....................................231 

80530.....................................231 

80531.....................................231 

80532.....................................231 

80533.....................................231 

80534.....................................238 

80535.....................................238 

80536.....................................238 

80537.....................................238 

80538.....................................238 

80539.....................................236 

80540.....................................236 

80541.....................................236 

80542.....................................236 

80543.....................................236 

80544.....................................236 

80545.....................................236 

80546.....................................224 

80547.....................................224 

80548.....................................448 

80549.....................................223 

80550.....................................196 

80550P...................................198 

80551.....................................197 

80552.....................................211 

80553.....................................209 

80554.....................................213 

80554S...................................212 

80555.....................................210 

80555S...................................210 

80556.....................................207 

80557.....................................204 

80558.....................................206 

80559.....................................203 

80560.....................................212 

80561.....................................209 

80562.....................................213 

80563.....................................211 

80564.....................................214 

80565.....................................214 

80566.....................................200 

80567.....................................199 

80568.....................................202 

80569.....................................201 

80570.....................................219 

80571.....................................219 

80572..................................... 118 

80573.....................................218 

80574.....................................218 

80577.....................................219 

80578..................................... 118 

80579..................................... 117 

80580.....................................217 

80581.....................................217 

80582..................................... 117 

80583..................................... 115 

80584.....................................206 

80586.....................................217 

80587.....................................218 

80588..................................... 116 

80589.....................................205 

80590.....................................205 

80591.....................................204 

80592.....................................230 

80593.....................................230 

80594.....................................230 

80595.....................................230 

80596.....................................228 

80597.....................................228 

80598.....................................228 

80600D...................................318 

80602.....................................322 

80603.....................................322 

80604.....................................322 

80605.....................................322 

80606.....................................322 

80607D...................................322 

80608.....................................322 

80609.....................................322 

80610D...................................322 

80611.....................................322 

80612.....................................322 

80613.....................................322 

80614.....................................324 

80615.....................................324 

80616.....................................324 

80617.....................................324 

80618.....................................324 

80619.....................................324 

80620.....................................324 

80621.....................................324 

80622.....................................323 

80623.....................................323 

80624.....................................323 

80625.....................................323 

80626D...................................323 

80627.....................................323 

80628.....................................323 

80629.....................................323 

80630.....................................323 

80631.....................................323 

80632.....................................323 

80633.....................................323 

80634.....................................323 

80635.....................................323 

80636D...................................323 

80637.....................................325 

80638.....................................325 

80639.....................................325 

80640.....................................325 

80641.....................................325 

80642.....................................325 

80643.....................................325 

80644.....................................325 

80645.....................................325 

80646D...................................325 

80651.....................................326 

80652.....................................326 

80653.....................................326 

80654.....................................326 

80655.....................................326 

80656.....................................326 

80657.....................................326 

80658.....................................326 

80659.....................................326 

80660.....................................326 

80661.....................................326 

80662.....................................326 

80663.....................................326 

80664.....................................326 

80665.....................................326 

80666.....................................326 

80667.....................................327 

80668.....................................327 

80669D...................................327 

80670.....................................327 

80671.....................................475 

80672.....................................327


I N D E X 19 

1442 

80673.....................................327 

80674.....................................324 

80675.....................................324 

80676.....................................324 

80677.....................................322 

80678.....................................322 

80679.....................................322 

80680.....................................322 

80681.....................................323 

80682.....................................323 

80683.....................................324 

80684.....................................324 

80685.....................................324 

80686.....................................324 

80687.....................................324 

80700D...................................300 

80700P...................................302 

80701.....................................301 

80702.....................................314 

80703.....................................311 

80704.....................................315 

80705.....................................313 

80706.....................................308 

80707.....................................305 

80708.....................................308 

80709.....................................306 

80710D...................................315 

80711.....................................312 

80712.....................................316 

80713.....................................314 

80714D...................................304 

80715.....................................303 

80716.....................................307 

80717.....................................307 

80718.....................................208 

80720.....................................316 

80721.....................................316 

80722..................................... 116 

80723..................................... 114 

80724..................................... 115 

80725..................................... 114 

80726..................................... 112 

80727..................................... 113 

80729.....................................309 

80730.....................................310 

80731.....................................311 

80732.....................................313 

80733.....................................312 

80745.....................................323 

80746.....................................323 

80747......................................323 

80748D...................................323 

80749.....................................323 

80750.....................................323 

80751.....................................323 

80752.....................................323 

80753.....................................323 

80754.....................................323 

80755D...................................323 

80756.....................................323 

80757.....................................323 

80758.....................................323 

80759.....................................323 

80760.....................................322 

80761.....................................322 

80762.....................................322 

80763.....................................322 

80764.....................................322 

80765.....................................322 

80766.....................................322 

80767.....................................322 

80768.....................................322 

80769.....................................322 

80770.....................................322 

80771.....................................322 

80772.....................................324 

80773.....................................324 

80774.....................................324 

80775.....................................324 

80776.....................................324 

80777.....................................997 

80777D...................................324 

80778.....................................324 

80779.....................................324 

80780.....................................324 

80781.....................................325 

80782.....................................325 

80783.....................................325 

80784.....................................325 

80785.....................................325 

80786.....................................325 

80787.....................................325 

80788.....................................325 

80789.....................................325 

80790.....................................325 

80793.....................................322 

80794.....................................322 

80795.....................................324 

80796.....................................324 

80797.....................................324 

80798.....................................324 

80799.....................................997 

80805.....................................323 

80806.....................................323 

80811.....................................323 

80812.....................................323 

80813.....................................324 

80814.....................................997 

80814D...................................324 

80815D...................................324 

80817D...................................325 

80818.....................................325 

80820.....................................325 

80822.....................................325 

80824.....................................325 

80826.....................................325 

80827.....................................325 

80830.....................................388 

80831.....................................388 

80833.....................................388 

80834.....................................388 

80835D...................................388 

80838.....................................388 

80839.....................................388 

80840.....................................388 

80841.....................................388 

80852.....................................388 

80854.....................................388 

80855D...................................388 

80856.....................................388 

80857.....................................388 

80859.....................................388 

80860.....................................388 

80861.....................................388 

80862.....................................388 

80863.....................................388 

80864.....................................388 

80865.....................................388 

80879.....................................386 

80880.....................................386 

80929.....................................105 

80930.....................................103 

80931............................... 99-100 

80932.................................96-98 

80933.................................93-95 

80934.................................90-92 

80950.....................................993 

80951.....................................993 

80952.....................................992 

80956.....................................992 

80965.....................................992 

80968.....................................993 

80969.....................................994 

80975.....................................992 

81002D...................................148 

81003.....................................149 

81004D...................................148 

81007F...................................145 

81008.....................................146 

81009F...................................145 

81011F....................................145 

81011P....................................144 

81012F....................................145 

81013......................................146 

81014......................................145 

81099F...................................146 

81099P...................................146 

81101......................................148 

81-110...................................1097 

81-111...................................1097 

81-112...................................1097 

81113D....................................148 

81114D....................................148 

81116......................................148 

81117D....................................148 

81118......................................148 

81119......................................149 

81120......................................149 

81121......................................149 

81122......................................149 

81123......................................149 

81124......................................149 

81125......................................149 

81126......................................149 

81127......................................147 

81128......................................146 

81200D...................................225 

81201.....................................226 

81202.....................................226 

81203F...................................108 

81204F...................................108 

81205.....................................109 

81206F...................................106 

81206P...................................107 

81207F....................................108 

81208F...................................222 

81209F...................................221 

81210F....................................222 

81211F....................................220 

81211P....................................220 

81212F....................................221 

81213F....................................222 

81214F....................................221 

81215F....................................220 

81216F....................................106 

81217...................................... 110 

81218......................................221 

81219......................................221 

81221.....................................223 

81222.....................................109 

81223.....................................109 

81224......................................146 

81225.....................................222 

81226.....................................222 

81227F...................................223 

81227P...................................223 

81229.....................................220 

81230F...................................106 

81235..................................... 110 

81236D................................... 110 

81237..................................... 111 

81238..................................... 111 

81239.....................................225 

81240......................................225 

81241......................................225 

81242......................................225 

81243......................................225 

81244.....................................225 

81245......................................226 

81246.....................................226 

81247......................................226 

81248.....................................226 

81249......................................226 

81250.....................................226 

81251......................................226 

81255.....................................147 

81256.....................................223 

81257.....................................319 

81258.....................................147 

81259.....................................224 

81260.....................................224 

81261.....................................148 

81262.....................................225 

81263.....................................320 

81272.....................................226 

81277.....................................224 

81278.....................................224 

81300.....................................320 

81301.....................................320 

81302.....................................321 

81303F...................................317 

81304F...................................317 

81304P...................................317 

81306F...................................317 

81307.....................................318 

81308D...................................318 

81309.....................................317 

81310......................................107 

81311......................................318 

81312......................................319 

81339F...................................318 

81339P...................................318 

81340.....................................319 

81341......................................319 

81342.....................................319 

81343.....................................319 

81344.....................................320 

81345.....................................320 

81346.....................................320 

81347.....................................320 

81348.....................................321 

81349.....................................321 

81350.....................................321 

81354.....................................319 

81355.....................................319 

81400.....................................387 

81401.....................................387 

81404.....................................387 

81411......................................387 

81412......................................387 

81413......................................387 

81499.....................................387 

81603..............................234,718 

81604..............................234,718 

81605..............................234,718 

81606..............................234,718 

81607..............................234,718 

81608..............................234,718 

81609..............................234,718 

81610...............................234,718 

81611D.............................234,718 

81612D............................234,718 

81613...............................234,718 

81614...............................234,717 

81615...............................234,717 

81616...............................234,717 

81617...............................234,717 

81618...............................234,717 

81619...............................234,717 

81620..............................234,717 

81621..............................234,717 

81622..............................234,717 

81623..............................234,717 

81624......................................661 

81625.....................................661 

81626.....................................661 

81627.....................................661 

81628.....................................661 

81629.....................................661 

81630.....................................661 

81631.....................................661 

81632.....................................661 

81633.....................................661 

81634.....................................661 

81635.....................................661 

81636.....................................661 

81637.....................................661 

81638.....................................661 

81639.....................................661 

81640.....................................661 

81641.....................................661 

81642.....................................661 

81643.....................................661 

81644.....................................714 

81645.....................................714 

81646.....................................714 

81647.....................................714 

81648.....................................714 

81649.....................................714 

81650.....................................655 

81651D...................................655 

81652D...................................655 

81653.....................................655 

81654.....................................655 

81655.....................................655 

81656.....................................655 

81657.....................................655 

81658.....................................655 

81659.....................................655 

81660.....................................655 

81661.....................................655 

81662.....................................655 

81663.....................................655 

81664.....................................655 

81665.....................................656 

81666.....................................656 

81667.....................................656 

81668.....................................656 

81669.....................................656 

81670.....................................656 

81671.....................................656 

81672.....................................656 

81673.....................................656 

81674......................................656 

81675.....................................656 

81676.....................................656 

81677.....................................656 

81678.....................................656 

81679.....................................656 

81680.....................................714 

81681.....................................714 

81682.....................................714 

81683.....................................714 

81684.....................................714 

81685.....................................714 

81686.....................................713 

81687.....................................713 

81688.....................................713 

81689.....................................713 

81690.....................................713 

81692.....................................713 

81693.....................................712 

81694.....................................712 

81695.....................................712 

81696.....................................712 

81697.....................................712 

81698.....................................649 

81699.....................................649 

81700.....................................649 

81701......................................649 

81703.....................................649 

81705.....................................649 

81706.....................................649 

81707......................................649 

81709.....................................649 

81710......................................649 

81711......................................649 

81713......................................649 

81714......................................649 

81715......................................649 

81717......................................649 

81718......................................649 

81719......................................649 

81721.....................................649 

81722.....................................649 

81723.....................................649 

81725.....................................649 

81733.....................................655 

81734.....................................655 

81735.....................................655 

81736.....................................656 

81737.....................................656 

81741......................................656 

81742......................................656 

81743......................................656


81744......................................656 

81745D...................................656 

81749......................................655 

81750.....................................655 

81751......................................656 

81752......................................656 

81753.....................................656 

81754.....................................659 

81755.....................................659 

81756.....................................659 

81757......................................659 

81758.....................................659 

81759.....................................659 

81760D...................................659 

81761......................................659 

81762.....................................659 

81763.....................................659 

81764.....................................659 

81765D...................................659 

81766.....................................659 

81767.....................................659 

81768.....................................658 

81769.....................................658 

81770.....................................658 

81771.....................................658 

81772.....................................658 

81773.....................................658 

81774......................................658 

81775.....................................658 

81776.....................................658 

81777.....................................658 

81778.....................................658 

81779.....................................658 

81780D...................................658 

81781......................................658 

81782.....................................719 

81783.....................................719 

81784.....................................719 

81785.....................................719 

81786.....................................719 

81787.....................................719 

81788.....................................719 

81789.....................................719 

81790.....................................719 

81791.....................................719 

81792.....................................721 

81793.....................................721 

81794D...................................721 

81795.....................................721 

81796.....................................721 

81797.....................................721 

81798.....................................721 

81799.....................................721 

81801.....................................721 

81802.....................................721 

81803.....................................721 

81804.....................................721 

81805.....................................721 

81890.....................................780 

81891.....................................780 

81892.....................................780 

81893.....................................780 

81900.....................................651 

81901.....................................651 

81902.....................................653 

81903.....................................659 

81904.....................................660 

81905.....................................660 

81906.....................................713 

81907.....................................713 

81908..............................216,716 

81909..............................216,717 

81910......................................711 

81911D....................................712 

81912......................................648 

81913......................................648 

81914......................................711 

81915......................................712 

81916......................................653 

81917......................................652 

81918......................................652 

81919......................................650 

81920.....................................654 

81921.....................................654 

81922.....................................655 

81923.....................................657 

81924.....................................657 

81925.....................................658 

81926.....................................718 

81927.....................................719 

81928.....................................720 

81929.....................................720 

81990.....................................780 

82000D...................................873 

82001.....................................873 

82002D...................................873 

82003.....................................873 

82004.....................................874 

82005D...................................875 

82006D...................................876 

82007.....................................876 

82011.....................................871 

82012.....................................872 

82013.....................................872 

82014.....................................871 

82017.....................................876 

82018.....................................876 

82019.....................................876 

82020D...................................871 

82025.....................................872 

82028.....................................872 

82029.....................................878 

82030.....................................878 

82031.....................................878 

82032.....................................876 

82033.....................................877 

82034.....................................877 

82035.....................................877 

82100.....................................871 

82103.....................................870 

82106.....................................874 

82107.....................................874 

82108.....................................870 

82110......................................875 

82111......................................875 

82200................................... 1131 

82208................................... 1130 

82210................................... 1130 

82212................................... 1131 

82216................................... 1130 

82220................................... 1131 

82224................................... 1130 

82233................................... 1130 

82248................................... 1131 

82250...................................1100 

82251...................................1100 

82252...................................1100 

82253...................................1100 

82254...................................1100 

82255................................... 1101 

82256................................... 1101 

82257................................... 1101 

82258................................... 1101 

82259...................................1102 

82260...................................1102 

82261................................... 1123 

82262................................... 1123 

82263................................... 1123 

82264................................... 1123 

82265................................... 1123 

82266................................... 1123 

82267................................... 1123 

82268................................... 1123 

82269................................... 1123 

82270................................... 1123 

82271................................... 1123 

82272................................... 1123 

82273................................... 1123 

82274................................... 1123 

82275................................... 1123 

82276................................... 1123 

82277................................... 1123 

82278................................... 1123 

82279................................... 1123 

82280................................... 1123 

82281................................... 1123 

82282................................... 1124 

82283................................... 1124 

82284................................... 1124 

82285................................... 1124 

82286................................... 1124 

82287................................... 1124 

82289................................... 1101 

82300................................... 1130 

82301D................................. 1130 

82302...................................1102 

82303...................................1100 

82304................................... 1121 

82305................................... 1121 

82306................................... 1120 

82307................................... 1122 

82308................................... 1122 

82309................................... 1122 

82500.....................................236 

82501.....................................236 

82502.....................................236 

82503.....................................236 

82504.....................................236 

82505.....................................236 

82506.....................................236 

82510.....................................159 

82511......................................159 

82512......................................159 

82513......................................159 

82514.....................................159 

82515......................................159 

82516.....................................159 

82517......................................239 

82518.....................................239 

82519.....................................239 

82700.....................................819 

82701.....................................819 

82702.....................................819 

82703.....................................819 

82704.....................................819 

82706.....................................819 

82707.....................................819 

82708.....................................819 

82710.....................................819 

82713.....................................819 

82715.....................................819 

82717.....................................819 

82718.....................................819 

82720.....................................819 

82734.....................................818 

82750.....................................830 

82751.....................................830 

82752.....................................830 

82753.....................................830 

82754.....................................830 

82755.....................................830 

82756.....................................830 

82757D...................................830 

82758.....................................830 

82759.....................................830 

82760.....................................830 

82761.....................................830 

82762.....................................830 

82763.....................................830 

82764.....................................829 

82765.....................................829 

82781.....................................823 

82782.....................................824 

82783.....................................824 

82784.....................................824 

82800.....................................987 

82801.....................................987 

82802D...................................987 

82803D...................................988 

82804.....................................988 

82812.....................................983 

82820...................................1035 

82821...................................1035 

82822D.................................1035 

82823...................................1036 

82824...................................1036 

82825...................................1036 

82881.....................................942 

83000.....................................104 

83001D............................101-102 

83080.......................................20 

83090.........................................8 

83091....................................9-10 

83092.......................................11 

83093.......................................12 

83094.......................................13 

83095..................................14-15 

83096..................................18-19 

83097..................................16-17 

83098.......................................22 

83101D.....................................67 

83102.......................................67 

83103.......................................67 

83104.......................................68 

83105.......................................67 

83106D.....................................67 

83107.......................................67 

83108.......................................67 

83109.......................................67 

83110D.....................................67 

83111........................................67 

83112D.....................................68 

83113D.....................................68 

83114D.....................................68 

83115........................................68 

83122BK...................................65 

83122BU...................................65 

83122RD...................................65 

83123BK...................................66 

83123BU...................................66 

83123RD...................................66 

83124BK...................................64 

83124BU...................................64 

83124RD...................................64 

83125BK...................................65 

83125BU...................................65 

83125RD...................................65 

83126BK...................................63 

83126BU...................................63 

83126OR...................................63 

83126RD...................................63 

83127BK...................................64 

83127BU...................................64 

83127OR...................................64 

83127RD...................................64 

83130.......................................66 

83132...................................1238 

83147.......................................67 

83148.......................................66 

83151.......................................67 

83152.......................................63 

83153.......................................62 

83154.......................................61 

83155.......................................62 

83156.......................................60 

83157.......................................61 

83158.......................................60 

835D............................ 1076,1162 

83600...................................1140 

83601...................................1140 

83602...................................1140 

84000D.................................1196 

84001D................................. 1197 

84002D.................................1196 

84003D................................. 1197 

84004D................................. 1197 

84005................................... 1197 

84006................................... 1197 

84007...................................1198 

84040...................................1196 

84050...................................1198 

84051...................................1199 

84052...................................1199 

84054D.................................1199 

84060...................................1198 

84062...................................1199 

84070...................................1186 

84080...................................1185 

84100.....................................433 

84101.....................................433 

84102.....................................433 

84103.....................................433 

84104.....................................433 

84105D...................................433 

84106.....................................433 

84107.....................................433 

84108.....................................433 

84109.....................................433 

84111......................................434 

84112......................................434 

84113......................................434 

84114......................................434 

84115......................................434 

84116......................................434 

84117......................................434 

84118......................................434 

84119......................................434 

84120.....................................434 

84121......................................434 

84122.....................................434 

84123.....................................434 

84124......................................434 

84126.....................................434 

84127.....................................434 

84128.....................................434 

84129.....................................434 

84130.....................................434 

84131......................................434 

84132.....................................434 

84133.....................................434 

84134.....................................434 

84135.....................................434 

84137......................................435 

84138.....................................435 

84139.....................................435 

84140.....................................435 

84141......................................435 

84142.....................................435 

84143.....................................435 

84144.....................................435 

84145.....................................435 

84146.....................................435 

84147......................................435 

84148.....................................435 

84149.....................................435 

84150D...................................435 

84152......................................435 

84153.....................................435 

84154.....................................435 

84155.....................................435 

84156.....................................435 

84157.....................................435 

84159.....................................436 

84160.....................................436 

84161.....................................436 

84162.....................................436 

84163.....................................436 

84164.....................................436 

84165.....................................436 

84166.....................................436 

84167.....................................436 

84168.....................................436 

84169.....................................436 

84170......................................436 

84172.....................................432 

84173.....................................432 

84174......................................432 

84176......................................432 

84300.....................................449 

84301.....................................449 

84302.....................................449 

84303.....................................449 

84304.....................................449 

84305.....................................449 

84306.....................................449 

19 

I N D E X 

1443


I N D E X 19 

1444 

84307.....................................449 

84309.....................................449 

84310.....................................449 

84311.....................................449 

84312.....................................449 

84313.....................................449 

84314.....................................449 

84315.....................................449 

84316.....................................449 

84317.....................................449 

84318D...................................449 

84319.....................................449 

84320D...................................449 

84322.....................................450 

84323D...................................450 

84324.....................................450 

84325D...................................450 

84326.....................................450 

84327.....................................450 

84328D...................................450 

84329.....................................450 

84331.....................................450 

84332.....................................450 

84333.....................................450 

84334.....................................450 

84335.....................................450 

84336.....................................450 

84337.....................................450 

84338.....................................450 

84339.....................................450 

84340.....................................450 

84341.....................................450 

84342.....................................450 

84343.....................................450 

84345D...................................452 

84346.....................................452 

84347.....................................452 

84348.....................................452 

84349.....................................452 

84350.....................................452 

84351.....................................452 

84352.....................................452 

84354.....................................452 

84355.....................................452 

84356.....................................452 

84357.....................................452 

84358.....................................452 

84359.....................................452 

84360.....................................452 

84361.....................................452 

84362.....................................452 

84363.....................................452 

84364.....................................452 

84365.....................................452 

84366.....................................452 

84367.....................................452 

84368.....................................452 

84389.....................................451 

84390.....................................451 

84391.....................................451 

84392.....................................451 

84393.....................................451 

84394.....................................451 

84395.....................................451 

84397.....................................451 

84398.....................................451 

84399.....................................451 

84400D..................................451 

84401.....................................451 

84402.....................................451 

84403.....................................451 

84405.....................................448 

84406.....................................448 

84407.....................................448 

84408.....................................448 

84500D...................................475 

84501.....................................475 

84502.....................................475 

84503.....................................475 

84504D...................................475 

84505D...................................475 

84506D...................................475 

84507D...................................475 

84508D...................................475 

84509D...................................475 

84510D...................................475 

84511D...................................475 

84512D...................................475 

84513D...................................475 

84514D...................................475 

84515D...................................475 

84516D...................................475 

84517D...................................475 

84518D...................................475 

84520.....................................476 

84521D...................................476 

84522D...................................476 

84523D...................................476 

84524D...................................476 

84525D...................................476 

84526D...................................476 

84527D...................................476 

84528D...................................476 

84529D...................................476 

84530D...................................476 

84531.....................................476 

84532.....................................476 

84533.....................................476 

84534.....................................476 

84535.....................................476 

84536.....................................476 

84537.....................................476 

84538.....................................476 

84539.....................................476 

84540.....................................476 

84541.....................................476 

84542.....................................476 

84543.....................................476 

84544.....................................476 

84546.....................................477 

84547.....................................477 

84548.....................................477 

84549.....................................477 

84550.....................................477 

84551.....................................477 

84552D...................................477 

84553.....................................477 

84554D...................................477 

84555D...................................477 

84556.....................................477 

84557.....................................477 

84558.....................................477 

84559.....................................477 

84560.....................................477 

84561.....................................477 

84562.....................................477 

84563.....................................477 

84564.....................................477 

84566.....................................478 

84567.....................................478 

84568.....................................478 

84569.....................................478 

84570.....................................478 

84571.....................................478 

84572.....................................478 

84573.....................................478 

84574.....................................478 

84575D...................................478 

84576D...................................478 

84577.....................................478 

84578.....................................478 

84579.....................................478 

84580.....................................478 

84581.....................................478 

84582.....................................478 

84583.....................................478 

84584.....................................478 

84585D...................................478 

84586D...................................478 

84587.....................................478 

84588.....................................478 

84589D...................................478 

84590D...................................478 

84591.....................................478 

84592.....................................478 

84593D...................................478 

84594D...................................478 

84596D...................................480 

84597.....................................480 

84598.....................................480 

84599.....................................480 

84600.....................................480 

84601.....................................480 

84602.....................................480 

84603.....................................480 

84604.....................................480 

84605.....................................480 

84606.....................................480 

84607.....................................480 

84608.....................................480 

84610.....................................481 

84611.....................................481 

84612.....................................481 

84613.....................................481 

84614.....................................481 

84615.....................................481 

84616.....................................481 

84617.....................................481 

84618.....................................481 

84619.....................................481 

84620.....................................481 

84621.....................................481 

84622.....................................481 

84623.....................................481 

84624.....................................481 

84626.....................................479 

84627.....................................479 

84628.....................................479 

84629.....................................479 

84630.....................................479 

84631.....................................479 

84632.....................................479 

84634.....................................479 

84635.....................................479 

84636.....................................479 

84637.....................................479 

84638.....................................479 

84639.....................................479 

84640.....................................479 

84643..................................... 474 

84644..................................... 474 

84645..................................... 474 

84646..................................... 474 

84800.....................................501 

84801.....................................501 

84802.....................................501 

84803.....................................501 

84804.....................................501 

84805.....................................501 

84806.....................................501 

84807.....................................501 

84808.....................................501 

84809.....................................501 

84810.....................................501 

84811.....................................501 

84812.....................................501 

84813.....................................501 

84814.....................................501 

84815.....................................501 

84816.....................................501 

84818.....................................501 

84819.....................................501 

84820.....................................501 

84821.....................................501 

84822.....................................501 

84823.....................................501 

84824.....................................501 

84825.....................................501 

84826.....................................501 

84827.....................................501 

84828.....................................501 

84830D...................................502 

84831.....................................502 

84832.....................................502 

84833.....................................502 

84834.....................................502 

84835.....................................502 

84836.....................................502 

84837.....................................502 

84838.....................................502 

84839.....................................502 

84840.....................................502 

84841.....................................502 

84842.....................................502 

84843.....................................502 

84844D...................................502 

84845.....................................502 

84846.....................................502 

84847.....................................502 

84848.....................................502 

84849.....................................502 

84850.....................................502 

84851.....................................502 

84852.....................................502 

84853.....................................502 

84854.....................................502 

84855D...................................502 

84856.....................................502 

84857.....................................502 

84858.....................................502 

84859.....................................502 

84860.....................................502 

84861.....................................502 

84863.....................................503 

84864.....................................503 

84865.....................................503 

84866.....................................503 

84867.....................................503 

84868.....................................503 

84869.....................................503 

84870.....................................503 

84871.....................................503 

84872.....................................503 

84873.....................................503 

84874.....................................503 

84875.....................................503 

84876.....................................503 

84877.....................................503 

84878.....................................503 

84879.....................................503 

84880.....................................503 

84881.....................................503 

84882.....................................503 

84883.....................................503 

84885.....................................500 

84886.....................................500 

84887.....................................500 

84888D...................................500 

84900.....................................428 

84901.....................................429 

84902.....................................427 

84903.............................426-427 

84904.....................................431 

84905.....................................432 

84906.....................................429 

84907.....................................430 

84908.....................................430 

84909.....................................431 

84910.....................................444 

84911.....................................444 

84912.....................................446 

84913.....................................446 

84914.....................................445 

84915.....................................445 

84916.....................................443 

84917.....................................447 

84918.....................................447 

84930.....................................469 

84931.....................................468 

84932.....................................468 

84933.....................................469 

84934.....................................470 

84935.....................................471 

84938.....................................473 

84939..................................... 474 

84940.....................................473 

84941.....................................472 

84942.....................................470 

84944.....................................472 

85007.....................................589 

85008D...................................589 

85009.....................................589 

85010.....................................589 

85011.....................................589 

85012.....................................589 

85013D...................................589 

85014.....................................589 

85015.....................................589 

85016.....................................589 

85017.....................................589 

85018.....................................589 

85019.....................................589 

85020.....................................589 

85021.....................................589 

85022.....................................589 

85024D...................................589 

85050.....................................786 

85051.....................................786 

85052.....................................786 

85053.....................................786 

85054.....................................786 

85055.....................................786 

85056.....................................787 

85057.....................................787 

85070.....................................788 

85071.....................................788 

85072.....................................787 

85073.....................................788 

85074.....................................788 

85090R...................................587 

85098.....................................587 

85099.....................................585 

85099R...................................585 

850DD.................................. 1179 

85108.....................................589 

85110......................................589 

85112......................................589 

85114......................................589 

85116......................................589 

85118......................................589 

85120D...................................589 

85122D...................................589 

85124D...................................589 

85126.....................................589 

85128.....................................589 

85130.....................................589 

85132.....................................589 

85197R...................................588 

85198.....................................588 

85199.....................................586 

85199R...................................586 

85200.....................................625 

85201.....................................627 

85202D...................................627 

85203.....................................627 

85204.....................................626 

85210D...................................626 

85211.....................................627 

85212.....................................627 

85213.....................................627 

85214.....................................627 

85215.....................................626 

85220D...................................627 

85221.....................................627 

85222.....................................631 

85224.....................................631 

85230.....................................631 

85232.....................................631 

85241D...................................631 

85258.....................................584 

85259.....................................584 

85260.....................................584 

85261.....................................584 

85262.....................................584 

85263.....................................584


I N D E X 

19 

1445 

85264.....................................584 

85265.....................................584 

85266.....................................584 

85267.....................................584 

85268.....................................584 

85269.....................................584 

85270.....................................584 

85271.....................................584 

85272.....................................584 

85274.....................................584 

85276.....................................584 

85278.....................................584 

85280.....................................584 

85282.....................................584 

85284.....................................584 

85288.....................................580 

85298.....................................580 

85299.....................................630 

85308.....................................583 

85309.....................................583 

85310D...................................583 

85311.....................................583 

85312D...................................583 

85313.....................................583 

85314.....................................583 

85315.....................................583 

85316.....................................583 

85317.....................................583 

85318.....................................583 

85319D...................................583 

85326.....................................631 

85334.....................................631 

85342.....................................631 

85352.....................................631 

85360.....................................583 

85361.....................................583 

85362.....................................583 

85364.....................................583 

85366.....................................583 

85368.....................................583 

85370.....................................583 

85372.....................................583 

85374.....................................583 

85388.....................................581 

85398.....................................581 

85399.....................................631 

85418.....................................623 

85439D...................................623 

85440D...................................623 

85441D...................................623 

85442.....................................623 

85443.....................................623 

85444.....................................623 

85445.....................................623 

85446.....................................623 

85447.....................................623 

85448.....................................623 

85449.....................................623 

85450.....................................622 

85452.....................................622 

85454.....................................622 

85456.....................................622 

85458.....................................622 

85460.....................................622 

85462.....................................622 

85464.....................................622 

85488.....................................621 

85498.....................................622 

85508.....................................625 

85509.....................................625 

85510.....................................625 

85511.....................................625 

85512D...................................625 

85513.....................................625 

85514D...................................625 

85515.....................................625 

85516.....................................625 

85517.....................................625 

85518.....................................625 

85519.....................................625 

85548.....................................621 

85550D...................................621 

85552D...................................621 

85554D...................................621 

85556D...................................621 

85558D...................................621 

85560.....................................621 

85562D...................................621 

85564.....................................621 

85570.....................................624 

85572.....................................624 

85574.....................................624 

85576.....................................624 

85578.....................................624 

85580.....................................624 

85582.....................................624 

85584.....................................624 

85597.....................................623 

85598.....................................620 

85599.....................................624 

85608.....................................609 

85609.....................................609 

85610.....................................609 

85611.....................................609 

85612.....................................609 

85613.....................................609 

85614.....................................609 

85615.....................................609 

85616.....................................609 

85617.....................................609 

85618.....................................609 

85619.....................................609 

85698.....................................606 

85698R...................................607 

85710.....................................608 

85712.....................................608 

85714D...................................608 

85716.....................................608 

85718.....................................608 

85720.....................................608 

85722.....................................608 

85724D...................................608 

85798.....................................607 

85798R...................................608 

85808.....................................582 

85809.....................................582 

85810.....................................582 

85811.....................................582 

85812.....................................582 

85813.....................................582 

85814.....................................582 

85815.....................................582 

85816.....................................582 

85817.....................................582 

85818.....................................582 

85819.....................................582 

85850.....................................582 

85851.....................................582 

85852.....................................582 

85854.....................................582 

85856.....................................582 

85858.....................................582 

85860.....................................582 

85862.....................................582 

85864.....................................582 

85888.....................................579 

85898.....................................579 

85908.....................................620 

85909.....................................620 

85910.....................................620 

85911.....................................620 

85912.....................................620 

85913.....................................620 

85914.....................................620 

85915.....................................620 

85916.....................................620 

85917.....................................620 

85918.....................................620 

85919.....................................620 

85920.....................................620 

85921.....................................620 

85922.....................................620 

85924.....................................620 

85925.....................................620 

85950.....................................619 

85951.....................................619 

85952.....................................619 

85954.....................................619 

85956.....................................619 

85958.....................................619 

85960.....................................619 

85962.....................................619 

85964.....................................619 

85966.....................................619 

85968.....................................619 

85970.....................................619 

85972.....................................619 

85987.....................................617 

85988.....................................616 

85989.....................................616 

85996.....................................618 

85998.....................................618 

85999.....................................617 

86.........................................1068 

8690CK...................................964 

8690CS...................................963 

8690FH...................................963 

8690FSK.................................963 

8690TN...................................964 

86990...................................1238 

86991...................................1238 

8790CS...................................964 

8790FSK.................................964 

8859D...................................1246 

8886CVN................................919 

890001GD..............................823 

890002GD..............................823 

890003GD..............................825 

890004GD..............................825 

890005GD..............................823 

890006GD..............................823 

890007GD..............................823 

890008GD..............................828 

890009GD..............................828 

89-001.................................1148 

890010GD..............................826 

89001D...................................420 

89-002.................................1148 

89002D...................................420 

89003.....................................420 

89-003.................................1148 

89004.....................................420 

89-004.................................1148 

890040...................................416 

89005.....................................420 

89-005.................................1148 

89006.....................................420 

89-006.................................1148 

890060GD..............................828 

89007.....................................420 

89-007.................................1148 

89008.....................................420 

89-008.................................1148 

890080GD..............................828 

89009.....................................420 

89-009.................................1148 

89010.....................................420 

89-010..................................1148 

890100GD..............................828 

89011.....................................420 

89-011..................................1148 

890110GD...............................828 

89012.....................................420 

89-012..................................1148 

890120GD..............................828 

89013D...................................420 

89014.....................................420 

89-014..................................1148 

890140GD..............................828 

89015.....................................420 

89016.....................................420 

890160GD..............................828 

89017.....................................420 

89018.....................................420 

89019.....................................420 

89020.....................................420 

89021.....................................420 

89-021................................. 1147 

89022.....................................421 

89-022................................. 1147 

89023.....................................421 

89-023................................. 1147 

89-024.................................. 1147 

89024D...................................421 

89-025................................. 1147 

89025D...................................421 

89026.....................................421 

89-026................................. 1147 

89027.....................................421 

89-027................................. 1147 

89028.....................................421 

89-028................................. 1147 

89029.....................................421 

89-029................................. 1147 

89030.....................................421 

89-030................................. 1147 

89031.....................................421 

89-031.................................. 1147 

89032.....................................421 

89-032................................. 1147 

89033.....................................421 

89034.....................................421 

89-034................................. 1147 

89035.....................................421 

89-035................................. 1147 

89036.....................................421 

89-036................................. 1147 

89037.....................................421 

89038.....................................421 

89039.....................................421 

8908D.....................................827 

8909D.....................................828 

89100.....................................710 

89101D...................................710 

89102.....................................711 

89103.....................................711 

89104.....................................711 

89105.....................................711 

891050GD..............................828 

89106.....................................711 

891060GD..............................828 

89107.....................................711 

891070GD...............................828 

891080GD..............................828 

89109.....................................710 

891090GD..............................828 

89110......................................710 

891100GD...............................828 

89111......................................710 

891110GD...............................828 

89112......................................710 

891120GD...............................828 

89113......................................710 

89118...............................215,714 

89119...............................215,715 

89120..............................233,715 

891200...................................416 

89121..............................233,715 

89122..............................233,715 

891226...................................415 

89123..............................233,715 

89124...............................233,715 

89125..............................233,715 

89126..............................233,715 

89127..............................233,715 

89128..............................233,715 

89129..............................233,715 

89130..............................233,715 

89140..............................233,716 

891400...................................416 

89141...............................233,716 

89142..............................233,716 

891427................................... 413 

89143..............................233,716 

89144..............................233,716 

89145..............................233,716 

89146..............................233,716 

89147..............................233,716 

89148..............................233,716 

89149..............................233,716 

8916D.....................................827 

8926D.....................................822 

893800...................................416 

893823...................................414 

8939.......................................822 

8940.......................................821 

9008.......................................596 

9010D.....................................596 

9011D.....................................596 

9012D.....................................596 

9014.......................................596 

9016D.....................................596 

9018D.....................................596 

901DD...................................1166 

9020.......................................596 

9022.......................................596 

9024.......................................596 

9026D.....................................596 

9028D.....................................596 

9030.......................................596 

9032.......................................596 

9034.......................................596 

9036.......................................596 

9038D.....................................596 

9040.......................................596 

9042.......................................596 

9044.......................................596 

9046D.....................................596 

9048.......................................596 

9050D.....................................596 

9052D.....................................596 

9054D.....................................596 

9056D.....................................596 

9060D.....................................596 

9062D.....................................596 

9106.......................................597 

9107.......................................597 

9108D.....................................597 

9109.......................................597 

9110D.....................................597 

9111........................................597 

9112........................................597 

9113D.....................................597 

9114D.....................................597 

9115D.....................................597 

9116D.....................................597 

9117D.....................................597 

9118D.....................................597 

9119........................................597 

9120.......................................597 

9121........................................597 

9122.......................................597 

9124........................................597 

9125D.....................................597 

9127D.....................................597 

912DD...................................1183 

9130D.....................................597 

9132........................................597 

9134D.....................................597 

9136.......................................597 

9141D.....................................597 

9146D.....................................597 

9150.......................................597 

9150L...................................1064 

9175......................................1065 

9190A.....................................982 

9190C.....................................982 

9190CL...................................982 

9190NE...................................982 

9201D.....................................628 

9202D.....................................628 

9203.......................................628 

9204D.....................................628 

9210D.....................................629 

9211D.....................................629


I N D E X 19 

1446 

9212D.....................................629 

9213.......................................629 

9214.......................................629 

9215D.....................................629 

9220D.....................................632 

9221.......................................632 

9222.......................................632 

9223.......................................632 

9224D.....................................632 

9230D.....................................633 

9231D.....................................633 

9240D.....................................628 

9260.......................................628 

9290C.....................................982 

9290NE...................................982 

93004D...................................594 

93005.....................................593 

9304.......................................595 

9308D.....................................592 

9309D.....................................594 

9312........................................590 

9317........................................592 

9328.......................................947 

9329.......................................947 

9336CVN................................917 

9336N.....................................917 

9336SCN................................917 

9337CVN................................917 

9337N.....................................917 

9404.......................................595 

9412........................................591 

9413........................................594 

9416........................................590 

9417........................................593 

9418........................................591 

9500DD..................................599 

9501DD...................................599 

9502D.....................................599 

9503D.....................................599 

9504D.....................................599 

9505D.....................................599 

9506D.....................................599 

9507D.....................................598 

9509N.....................................601 

9509RN..................................601 

9510DD...................................599 

9511D.....................................599 

9512D.....................................599 

9513D.....................................599 

9514D.....................................599 

9515D.....................................599 

9516D.....................................599 

9517D.....................................599 

9518D.....................................599 

9519D.....................................599 

9520D.....................................598 

9521ND...................................605 

9525ND..................................605 

9526ND..................................605 

9527N.....................................605 

9528N.....................................605 

9529N.....................................605 

9530ND..................................605 

9531ND...................................605 

9532N.....................................605 

9533N.....................................603 

9534N.....................................605 

9535D.....................................632 

9537N.....................................633 

9538N.....................................605 

9539N.....................................605 

953FT...................................1069 

9540N.....................................605 

9543.......................................604 

9545N.....................................604 

954FT...................................1069 

9550.......................................614 

9551.......................................615 

9552.......................................615 

9553D.....................................615 

9554.......................................615 

9555.......................................615 

9555D...................................1251 

9556.......................................615 

9556D...................................1251 

9557D.....................................615 

9557DD................................1251 

9558.......................................615 

9558D...................................1251 

9559.......................................615 

9559D...................................1251 

9560.......................................615 

9560D...................................1251 

9561.....................................1251 

9562.....................................1251 

9563.....................................1251 

9564.....................................1251 

9565D...................................1251 

9567.....................................1251 

9567RN..................................603 

9570.......................................614 

9571.......................................615 

9572.......................................615 

9573.......................................615 

9574........................................615 

9575.......................................615 

9576.......................................615 

9577.......................................615 

9601N.....................................605 

9601RN...................................602 

9602N.....................................600 

9602RN..................................600 

9608N.....................................606 

9609N.....................................606 

9610N.....................................606 

9611N.....................................606 

9612N.....................................606 

9613N.....................................606 

9614N.....................................606 

9615N.....................................606 

9616N.....................................606 

9617N.....................................606 

9618N.....................................606 

9619N.....................................606 

9620N.....................................602 

9621N.....................................606 

9622N.....................................606 

9624N.....................................606 

9625N.....................................606 

966N.....................................1067 

9679.....................................1248 

9680.....................................1248 

9681.....................................1248 

9682D...................................1248 

9683.....................................1248 

9684.....................................1248 

9685D...................................1248 

9700.......................................611 

9701.......................................611 

9702D.....................................610 

9703.......................................612 

9704D.....................................613 

9705.......................................613 

9706.......................................613 

9707.......................................613 

9708.......................................613 

9709.......................................613 

9710.......................................613 

9711........................................613 

9712........................................613 

9713........................................613 

9714D.....................................613 

9715D.....................................613 

9716D.....................................613 

9747......................................1250 

9748.....................................1250 

9749......................................1250 

9750D...................................1250 

9751.....................................1250 

9756.....................................1250 

9757.....................................1251 

9758.....................................1251 

9817.....................................1250 

9840D.....................................629 

9841D.....................................630 

9842.......................................630 

9843D.....................................630 

9844.......................................630 

9850.......................................629 

9851D.....................................630 

9852D.....................................630 

9853.......................................630 

9854.......................................630 

9855D.....................................630 

9867.....................................1250 

9900D.....................................612 

9901D.....................................610 

9902D.....................................609 

9903D.....................................612 

9908D.....................................613 

9909D.....................................613 

9910D.....................................613 

9911D.....................................613 

9912D.....................................613 

9913D.....................................613 

9914D.....................................613 

9915D.....................................613 

9916D.....................................613 

9917.......................................613 

9918.......................................613 

9919D.....................................613 

9921D.....................................613 

9922D.....................................613 

9924D.....................................613 

9925D.....................................613 

A10N.......................................936 

A11N........................................936 

A12N.......................................936 

A13N.......................................936 

A9N.........................................936 

AC10NKWMP..........................775 

AC110.....................................769 

AC110C...................................771 

AC110CV.................................771 

AC110V...................................769 

AC112.....................................769 

AC112C...................................771 

AC112CV.................................771 

AC112V...................................769 

AC115.....................................770 

AC115C...................................771 

AC115J...................................776 

AC115PSK...............................776 

AC118.....................................770 

AC118J...................................776 

AC118PSK...............................776 

AC124.....................................770 

AC124J...................................776 

AC124PSK...............................776 

AC14.......................................769 

AC14C.....................................771 

AC14CV...................................771 

AC14V.....................................769 

AC16.......................................769 

AC16C.....................................771 

AC16CV...................................771 

AC16V.....................................769 

AC18.......................................769 

AC18C.....................................771 

AC18CV...................................771 

AC18V.....................................769 

AC210BK.................................769 

AC210CBK..............................771 

AC210CVS...............................772 

AC210VS.................................770 

AC212BK.................................770 

AC212CBK..............................772 

AC212CVS...............................772 

AC212VS.................................770 

AC215BK.................................770 

AC215CBK..............................772 

AC215VS.................................770 

AC218BK.................................770 

AC218VS.................................770 

AC224BK................................770 

AC224VS.................................770 

AC24BK...................................769 

AC24CBK................................771 

AC24CVS................................771 

AC24VS...................................769 

AC26BK..................................769 

AC26CBK................................771 

AC26CVS................................771 

AC26VS...................................769 

AC2812VS...............................777 

AC28BK..................................769 

AC28CBK................................771 

AC28CVS................................771 

AC28VS...................................769 

AC3.........................................777 

AC3C.......................................778 

AC5.........................................778 

AC610RS.................................780 

AC6NKWMP............................775 

AC8NKWMP............................775 

AL725...................................1045 

AL725MAG............................1045 

AL748CME............................1045 

AT10SPUD...............................768 

AT110......................................772 

AT110C....................................774 

AT110CV.................................774 

AT110V....................................772 

AT112......................................772 

AT112C....................................774 

AT112CV..................................774 

AT112V....................................772 

AT115......................................773 

AT115J....................................776 

AT115SPUD.............................768 

AT118......................................773 

AT118J....................................776 

AT14........................................772 

AT14V......................................772 

AT16........................................772 

AT16C.....................................774 

AT16V......................................772 

AT18........................................772 

AT18C.....................................774 

AT18CV...................................774 

AT18V......................................772 

AT210BK.................................773 

AT210CBK...............................775 

AT210CVS...............................775 

AT210VS.................................773 

AT212BK.................................773 

AT212CBK...............................775 

AT212CVS...............................775 

AT212VS.................................773 

AT215BK.................................774 

AT218BK.................................774 

AT24BK...................................773 

AT24VS...................................773 

AT2610cvs..............................779 

AT26BK...................................773 

AT26CBK.................................775 

AT26CVS.................................775 

AT26VS...................................773 

AT28BK...................................773 

AT28CBK.................................775 

AT28CVS.................................775 

AT28VS...................................773 

AT3.........................................779 

AW0310427..........................1286 

AW0320427..........................1286 

AW0330427..........................1288 

AW0751024..........................1295 

AW0801027..........................1296 

AW0801227..........................1296 

AW0801427..........................1296 

B0713601.............................1300 

B0713602.............................1300 

B3899814............................. 1314 

B3899816............................. 1314 

B3899818............................. 1314 

B3899832............................. 1314 

B3899836............................ 1314 

B3899852............................. 1314 

B5950124............................. 1312 

B5950324............................. 1312 

B5950724............................. 1312 

B5954024............................. 1312 

B5955024............................. 1312 

B5956024............................. 1312 

B5959024............................. 1312 

B7606601............................. 1318 

B7675109.............................1329 

B7675119.............................1329 

B7675129.............................1329 

B7675304.............................1328 

B7675314.............................1328 

B7675324.............................1328 

B7675344.............................1328 

B7675354.............................1328 

B7676304.............................1328 

B7676314.............................1328 

B7676324.............................1328 

B7676344.............................1328 

B7676354.............................1328 

B7679034.............................1327 

B7679035.............................1327 

BU1405...................................980 

BU1604...................................980 

BU1605...................................980 

BU1606...................................980 

C0710517.............................1300 

C0712017.............................1300 

C0712027.............................1300 

C0713617.............................1300 

C0713627.............................1300 

C106PM................................1051 

C106PMCAL..........................1051 

C106TPM..............................1051 

C10CV.....................................926 

C10SV.....................................926 

C11CCSV.................................927 

C11CCV...................................927 

C120TP.................................1051 

C1276...................................1063 

C1276D.................................1063 

C1278...................................1063 

C1278D.................................1063 

C1286...................................1063 

C1286D.................................1063 

C1288...................................1063 

C1288BLK.............................1063 

C129012SF...........................1058 

C1290SF590.........................1058 

C1291SF590.........................1058 

C1293SF590.........................1058 

C1676D.................................1062 

C18CCR...................................927 

C18CCS...................................927 

C20CH....................................927 

C213.....................................1049 

C213C...................................1049 

C213CX.................................1049 

C213D...................................1049 

C216.....................................1049 

C21616THBLK......................1049 

C216D...................................1049 

C2276D.................................1062 

C2276ME..............................1062 

C2730DMM..........................1063 

C2730MM.............................1063 

C2730MME...........................1063 

C2750DMM..........................1063 

C2750MME...........................1063 

C2910MME590.....................1058 

C2915MME590.....................1058 

C2920MME150M..................1058 

C2920MME590....................1058 

C4ASN....................................949 

C5CV.......................................926 

C6CCSV..................................927


C6CCV.....................................927 

C6NV.......................................926 

C711H.....................................768 

C715.......................................768 

C718.......................................768 

C79H.......................................768 

C7CV.......................................926 

C7SV.......................................926 

C8SMV....................................927 

C9212...................................1046 

C9212X.................................1046 

C9NV.......................................926 

C9W........................................927 

CB8.........................................946 

CD2730DMM........................1062 

CD2750MME........................1062 

CFW2......................................776 

CLP2SET.................................926 

CLP3SET.................................925 

CLP3SETC..............................925 

CLP5SET.................................925 

CMB4V....................................865 

CMB6V....................................865 

CMBD7P.................................861 

CN129012SF5.......................1057 

CN1290SF590......................1057 

CN1290SME.........................1057 

CN1291SF590.......................1057 

CN1293SDF590....................1057 

CN1293SF5871....................1057 

CN1293SF590......................1057 

CN1293SMEF59...................1057 

CN1294SF5871....................1057 

CN1294SF590......................1057 

CN1294SMEF59...................1057 

CN1295SF590......................1057 

CN1295SME.........................1057 

CN1295SME590...................1057 

CN1296SF590......................1057 

CN1296SMEF59...................1057 

CN1298SME590...................1057 

CND1V.....................................866 

CND2V....................................866 

CND3V....................................866 

CND4V....................................866 

CND5SAE................................866 

CND5V....................................866 

CND6V....................................866 

CS8516.................................1044 

CS8525.................................1044 

CS8525CME.........................1044 

CSD10.....................................857 

CSD144...................................860 

CSD2.......................................858 

CSD30V..................................860 

CSD33V..................................860 

CSD36....................................860 

CSD36V..................................860 

CSD41V...................................860 

CSD44V..................................860 

CSD46V..................................860 

CSD4PC..................................858 

CSD56....................................860 

CSD56V..................................860 

CSD58V..................................860 

CSD6.......................................857 

CSDP34..................................859 

CSDP34V................................859 

CSDP41V.................................859 

CSDP44..................................859 

CSDP44V................................859 

CSDP46V................................859 

CSDP48V................................859 

CSDP56V................................859 

CSDS44..................................860 

CSDS44V................................860 

CSDS56..................................860 

CSDS56V................................860 

CTD10V...................................859 

CTD15V...................................859 

CTD20V...................................859 

CTD25V...................................859 

CTD27V...................................859 

CTD30V...................................859 

CTD40V...................................859 

CTK140CMP............................127 

CTK148MP..............................126 

CTK14ME................................405 

CTK14SAE...............................405 

CTK170CMP............................125 

CTK170MP..............................125 

CTK21ME................................404 

CTK21SAE..............................404 

CTK30SET..............................299 

CTK70MP................................128 

CW12H....................................768 

CW15......................................768 

CW24......................................768 

DB16..................................... 1128 

DB18X................................... 1128 

DB24..................................... 1128 

DB30X................................... 1128 

FB13..................................... 1128 

FB15..................................... 1128 

FB7....................................... 1128 

FE050...................................1053 

FE050D.................................1053 

FE100....................................1053 

FE100D.................................1053 

FE150....................................1053 

FE150D.................................1053 

FE200...................................1053 

FE200D.................................1053 

FE300...................................1053 

FE300D.................................1053 

FM015CME...........................1053 

FM030CM.............................1053 

FM030CME...........................1053 

FM030DM.............................1053 

FM050CM.............................1053 

FM050CME...........................1053 

FM060CME...........................1053 

FM100CME...........................1053 

G210CV...................................916 

G24CV.....................................916 

GG010HN................................923 

GG014HN................................923 

GG08HN..................................923 

GT28CN..................................923 

H26CVSMLN...........................915 

H26N.......................................915 

H26VN.....................................915 

H28CVSMLN...........................915 

H28N.......................................915 

H28VN.....................................915 

HC253...................................1049 

HC256...................................1049 

HD403..................................1054 

HD403D................................1054 

HD406..................................1054 

HD406D................................1054 

HDH406................................1054 

HDH406D..............................1054 

HE4405A.................................979 

HKA01....................................978 

HKE0501A...............................979 

HKE0751A...............................979 

HKE0751B...............................979 

HKE0751C...............................979 

HKE1501A...............................979 

HKE1501C...............................979 

HKE1502A...............................979 

HKE5002A..............................979 

HKE5002C..............................979 

HKE5004A..............................979 

HKE5004C..............................979 

HKH02....................................978 

HL120P...................................915 

HR14N...................................1021 

HR15.....................................1021 

HRC300..................................975 

HV0142526........................... 1274 

HV0184526...........................1279 

HV116...................................1044 

HV15CME..............................1051 

HV30CME..............................1051 

HV420...................................1044 

HW100..................................1051 

HW223..................................1050 

HW223D...............................1050 

HW223ME.............................1050 

HW226..................................1050 

HW226D...............................1050 

HW226ME.............................1050 

HW227CME...........................1050 

HW50....................................1051 

HX46N..................................1066 

HYT100.................................1050 

HYT100D..............................1050 

HYT15CME............................1050 

HYT30CME...........................1050 

HYT50...................................1050 

HYT50CME...........................1050 

J26CV.....................................916 

J7SN.......................................949 

KSRN......................................948 

L26CV.....................................916 

L610......................................1046 

L610CME..............................1046 

L616......................................1046 

L616CME..............................1046 

L625.....................................1046 

L625CME..............................1046 

L625SCTMP..........................1046 

L725MAG..............................1045 

L748MAG..............................1045 

LPA0722227.........................1295 

M1R........................................932 

M1RS1....................................933 

M2R........................................933 

M2RS1....................................933 

M300......................................936 

M3R........................................932 

M400......................................936 

M4R........................................935 

M56RPN.................................921 

M57ERN..................................922 

M57RPN..................................921 

M5R........................................933 

M6R........................................934 

M7508494............................1309 

M7R........................................934 

M8R........................................934 

M9R........................................935 

MB10.................................... 1128 

MB12.................................... 1128 

MB8...................................... 1128 

MCAT09000..............................56 

MPC3......................................935 

MPX........................................935 

MW18M................................1070 

MW18TP...............................1070 

MW38M................................1070 

MW38TP...............................1070 

NP11..................................... 1129 

NS1501...................................995 

NS1502...................................995 

NS1503...................................995 

NS1504...................................995 

NS500.....................................993 

NS503N..................................996 

NSP1.......................................995 

NSP2.......................................995 

NSP5.......................................995 

NSP9.......................................997 

O9100B.................................1061 

O9200B................................1061 

O9300B................................1061 

P2024CME............................1043 

P2034CME............................1043 

P2035CM..............................1043 

P2035CME............................1043 

P2048CME............................1043 

P2125...................................1043 

P2133...................................1043 

P2133D.................................1043 

P2210...................................1043 

P2210MEX............................1043 

P2212...................................1043 

P2212DX...............................1043 

P2212X.................................1043 

P2223CME............................1043 

P2312...................................1043 

P2312D.................................1043 

P2316...................................1043 

P2335ME..............................1043 

P2410CME............................1043 

P406.......................................934 

P407.......................................934 

P43N.......................................922 

PA0722027...........................1295 

PB0722827...........................1296 

PD0143426........................... 1274 

PD0722027..........................1295 

PD0722087..........................1295 

PD0722127...........................1275 

PD0722627..........................1288 

PD0725027..........................1275 

PD0752496...........................1294 

PE0722027...........................1295 

PG0722227..........................1295 

PHV1010...............................1042 

PHV1012...............................1042 

PHV1023CM..........................1042 

PHV1023CME.......................1042 

PHV1024CME........................1042 

PHV1034CME.......................1042 

PHV1034DM.........................1042 

PHV1035CM..........................1042 

PHV1035CME.......................1042 

PHV1048CM.........................1042 

PHV1048CME.......................1042 

PHV1048DM.........................1042 

PHV1312...............................1042 

PHV1312D.............................1042 

PHV1316...............................1042 

PHV1410CME........................1042 

PHV1425...............................1042 

PHV1425D.............................1042 

PHV1425ED...........................1042 

PHV1433...............................1042 

PHV1433DM.........................1042 

PQR1312...............................1043 

PQR1316...............................1043 

PQR1425...............................1043 

PS0332027...........................1288 

PS100S.................................1050 

PS1806DN............................1061 

PS1806N...............................1061 

PS1808DN............................1061 

PS1808N...............................1061 

PS1809DN............................1061 

PS20509C..............................924 

PS5429C.................................924 

PS6549C................................924 

PSFE100...............................1053 

PSFE200...............................1053 

PSFE300...............................1053 

PSFE3PCKIT.........................1053 

PSFM030CME.......................1053 

PSFM060CME......................1053 

PSFM100CME.......................1053 

PSMW18...............................1070 

PSMW38...............................1070 

PWC9......................................960 

QRL625MP...........................1046 

R200SET2..............................914 

R200SET3..............................914 

R210CV...................................915 

R212CV...................................915 

R216CV...................................915 

R220CV...................................915 

R27CV.....................................915 

R410CV...................................915 

R412CV...................................915 

RB4.......................................1134 

RB5.......................................1134 

RB6.......................................1134 

RD08BK..................................195 

RD12BK...................................299 

RD16BK..................................385 

RS1N.......................................948 

RWK14D..................................943 

RWK14V..................................943 

RWK16V..................................943 

RWK18D..................................943 

S1291F590...........................1058 

S1293F590...........................1058 

S590.....................................1059 

SDPS6.....................................865 

SGMTK1..............................54-55 

SGMTK2...................................55 

SGMTKA...................................56 

SS16CN.................................1088 

SS16RN................................1088 

SS20BHN..............................1085 

SS20CN................................1088 

SS20RN................................1088 

SS22RCFN............................1088 

SS22RN................................1088 

SS24BHN..............................1085 

SS28RCFN............................1088 

SS28RN................................1088 

T0222725.............................1306 

T0223698.............................1306 

T0223820.............................1306 

T0513598.............................1307 

T0513678.............................1307 

T0513698.............................1307 

T066N...................................1066 

T0762026.............................1295 

T3898910............................. 1314 

T3898917............................. 1314 

T3898934............................. 1314 

T3898936............................. 1314 

T3898954............................. 1314 

T3898956............................. 1314 

T3898976............................. 1314 

T3899720............................. 1313 

T3899724............................. 1313 

T3899728............................. 1313 

T3899733............................. 1313 

T3899736............................. 1313 

T3899744............................. 1313 

T3899752............................. 1313 

T3899760............................. 1313 

T3899768............................. 1313 

T3899776............................. 1313 

T3899910............................. 1314 

T3899913............................. 1314 

T3899916............................. 1314 

T3899919............................. 1314 

T4900324............................. 1313 

T4900424............................. 1313 

T4900524............................. 1313 

T4900624............................. 1313 

T4900824............................. 1313 

T5423300............................. 1313 

T5423301............................. 1313 

T5423302............................. 1313 

T5800124............................. 1312 

T5901024............................. 1317 

T5950024............................. 1312 

T5950124............................. 1312 

T5950324............................. 1312 

T5950724............................. 1312 

T5950924............................. 1312 

T636N...................................1068 

T656N...................................1068 

T6991294.............................1337 

T7000226.............................1303 

T7000326.............................1303 

T7000926.............................1303 

T7550301.............................1326 

T7550302.............................1326 

19 

I N D E X 

1447


I N D E X 19 

T7550303.............................1326 

T7550304.............................1326 

T7550401.............................1326 

T7550402.............................1326 

T7550403.............................1326 

T7550404.............................1326 

T7550421.............................1326 

T7550501.............................1326 

T7550502.............................1326 

T7551522.............................1326 

T7600311............................. 1319 

T7600511............................. 1319 

T7600531............................. 1319 

T7600561............................. 1319 

T7601201............................. 1319 

T7601311............................. 1319 

T7601451............................. 1319 

T7601461............................. 1319 

T7601801.............................1320 

T7601912.............................1320 

T7602301.............................1320 

T7602611.............................1320 

T7603211.............................1320 

T7603441.............................1320 

T7603911.............................1320 

T7604002.............................1320 

T7604622.............................1320 

T7605501............................. 1319 

T7605511............................. 1319 

T7605521............................. 1319 

T7605701............................. 1319 

T7605801............................. 1319 

T7605811............................. 1319 

T7605821............................. 1319 

T7606001............................. 1319 

T7606011............................. 1319 

T7606021............................. 1319 

T7606031............................. 1319 

T7606102.............................1320 

T7606301.............................1320 

T7606502.............................1320 

T7606801.............................1320 

T7607301.............................1320 

T7607306.............................1320 

T7607401.............................1320 

T7607502.............................1320 

T7607602.............................1320 

T7607702.............................1320 

T7610102.............................1321 

T7610832.............................1321 

T7615012.............................1321 

T7615102.............................1321 

T7615202.............................1321 

T7615302.............................1321 

T7615312.............................1321 

T7615402.............................1321 

T7615412..............................1321 

T7615422.............................1321 

T7615502.............................1321 

T7615602.............................1321 

T7615802.............................1321 

T7615902.............................1321 

T7616202............................. 1318 

T7616302.............................1321 

T7616402.............................1321 

T7616412.............................1321 

T7616602.............................1321 

T7616702.............................1321 

T7620334.............................1322 

T7620534.............................1322 

T7620614.............................1322 

T7620794.............................1320 

T7620804.............................1322 

T7620934.............................1320 

T7625004.............................1322 

T7625014.............................1322 

T7625104.............................1322 

T7625114..............................1322 

T7625124.............................1322 

T7625204.............................1322 

T7625304.............................1322 

T7625314.............................1322 

T7625324.............................1322 

T7625404.............................1322 

T7625434.............................1322 

T7625504.............................1322 

T7625604.............................1322 

T7625614.............................1322 

T7630406.............................1325 

T7630416.............................1325 

T7630426.............................1325 

T7630436.............................1325 

T7630446.............................1325 

T7630506.............................1325 

T7630526.............................1325 

T7630536.............................1325 

T7630546.............................1325 

T7630556.............................1325 

T7631204.............................1323 

T7631304.............................1323 

T7631324.............................1323 

T7631404.............................1323 

T7631414..............................1323 

T7631434.............................1323 

T7631524.............................1323 

T7631534.............................1323 

T7631604.............................1323 

T7631614.............................1323 

T7631704.............................1323 

T7631804.............................1323 

T7633002.............................1330 

T7633003.............................1330 

T7633004.............................1330 

T7637502.............................1330 

T7637503.............................1330 

T7637504.............................1330 

T7640302............................. 1318 

T7640322............................. 1318 

T7645000.............................1323 

T7645006.............................1324 

T7645016.............................1324 

T7645026.............................1324 

T7645036.............................1324 

T7645046.............................1324 

T7645066.............................1324 

T7645068.............................1324 

T7645074.............................1324 

T7645106.............................1324 

T7645116.............................1324 

T7645126.............................1324 

T7645136.............................1324 

T7645146.............................1324 

T7645156.............................1324 

T7655002.............................1326 

T7655012.............................1326 

T7655022.............................1326 

T7655032.............................1326 

T7655042.............................1326 

T7655052.............................1326 

T7655062.............................1326 

T7655100.............................1326 

T7655112.............................1326 

T7655120.............................1326 

T7655132.............................1326 

T7655142.............................1326 

T7655202.............................1326 

T7655212.............................1326 

T7655222.............................1326 

T7655312.............................1326 

T7655402.............................1327 

T7655404.............................1327 

T7655412.............................1327 

T7655422.............................1327 

T7660841............................. 1317 

T7661152............................. 1317 

T7661361............................. 1317 

T7662114............................. 1317 

T7662154............................. 1317 

T7662322............................. 1317 

T7662342............................. 1317 

T7662351............................. 1317 

T7662372............................. 1317 

T7663550............................. 1317 

T7665001............................. 1317 

T7665012............................. 1317 

T7665032............................. 1317 

T7665042............................. 1317 

T7670409.............................1329 

T7670419.............................1329 

T7670429.............................1329 

T7670439.............................1329 

T7670449.............................1329 

T7670459.............................1329 

T7670479.............................1329 

T7670489.............................1329 

T7670499.............................1329 

T7670609.............................1329 

T7670619.............................1329 

T7670629.............................1329 

T7670639.............................1329 

T7670649.............................1329 

T7670659.............................1329 

T7670669.............................1329 

T7670754.............................1328 

T7670904.............................1328 

T7670914.............................1328 

T7670924.............................1328 

T7670944.............................1328 

T7670954.............................1328 

T7691800.............................1327 

T7691801.............................1327 

T7691802.............................1327 

T7691803.............................1327 

T7691804.............................1327 

T9001424.................... 1331,1351 

T9001524.................... 1331,1351 

T9001624.................... 1331,1351 

T9001824.................... 1331,1351 

T9101424.....................1332,1351 

T9101524.....................1332,1351 

T9101624....................1332,1351 

T9101824.....................1332,1351 

T9401424....................1333,1353 

T9401524....................1333,1353 

T9401624....................1333,1353 

T9401824....................1333,1353 

T9420405............................. 1315 

T9420505............................. 1315 

T9420605............................. 1315 

T9420705............................. 1315 

T9420805............................. 1315 

T9421005............................. 1315 

T9501424....................1332,1351 

T9501524....................1332,1351 

T9501624....................1332,1351 

T9501805.............................1331 

T9501824....................1332,1351 

T9503415....................1332,1352 

T9503515....................1332,1352 

T9600335.............................1330 

T9600435.............................1330 

T9600535.............................1330 

T9600635.............................1330 

T9600835.............................1330 

T9601035.............................1330 

T9601235.............................1330 

T9601635.............................1330 

T9630335....................1330,1357 

T9630435....................1330,1357 

T9630535....................1330,1357 

T9630635....................1330,1357 

T9630835....................1330,1357 

T9640335.............................1331 

T9640405............................. 1315 

T9640435.............................1331 

T9640505............................. 1315 

T9640535.............................1331 

T9640605............................. 1315 

T9640635.............................1331 

T9640705............................. 1315 

T9640805............................. 1315 

T9640835.............................1331 

T9641005............................. 1315 

T9641035.............................1331 

T9641205............................. 1315 

T9641235.............................1331 

T9641405............................. 1315 

T9641435.............................1331 

T9641605............................. 1315 

T9641635.............................1331 

T9641805............................. 1315 

T9642005............................. 1315 

T9700424....................1333,1353 

T9700524....................1333,1353 

T9700624....................1333,1353 

T9700824....................1333,1353 

TC1.........................................947 

TC5.........................................947 

TG4N.....................................1034 

TP53N.....................................922 

TP55N.....................................922 

TP56N.....................................922 

TP57N.....................................922 

TP63N.....................................922 

TT524N.................................1068 

TX46N...................................1066 

V10N.......................................937 

V19N.......................................937 

W106920................................976 

W10824..................................980 

W11800..................................975 

W118SQ..................................976 

W119581................................979 

W119587................................979 

W119681................................979 

W1225....................................945 

W1225HLSP............................945 

W1226....................................945 

W12L.......................................938 

W12LRB..................................938 

W14L.......................................938 

W14LRB..................................938 

W177089................................973 

W1770A..................................972 

W1770CD................................972 

W1770T..................................974 

W1770TA................................974 

W1770TC................................973 

W1770TG................................974 

W1770TN................................972 

W20........................................944 

W20LH....................................944 

W20P......................................944 

W20SP....................................945 

W20W.....................................945 

W22N......................................944 

W22P......................................944 

W22W.....................................945 

W25232..................................981 

W30........................................946 

W32368..................................981 

W37048..................................981 

W393....................................1047 

W5N........................................937 

W606....................................1047 

W606ME...............................1047 

W606P..................................1047 

W606PD................................1047 

W606PM...............................1047 

W608....................................1047 

W6110...................................1047 

W616....................................1047 

W616BO................................1047 

W75000..................................975 

W7BWN..................................937 

W7N........................................937 

W812.......................................943 

W8BLT....................................946 

W8TA......................................944 

W912......................................943 

W9210..................................1046 

W9210ME.............................1046 

W9212..................................1046 

W928....................................1046 

W9312..................................1046 

W9312D................................1046 

WC12CMN.............................1020 

WC1CMN...............................1020 

WC34CMN............................1020 

WC3S......................................938 

WC5L......................................939 

WC5S......................................939 

WCSET3CMN........................1020 

WEZSNIP.................................944 

WF12.......................................940 

WF18.......................................940 

WF24......................................940 

WHCS2...................................943 

WHN1......................................939 

WK500V..................................941 

WK5V......................................942 

WK8V......................................942 

WK9V......................................942 

WKAR1...................................941 

WKF1......................................941 

WRC125..................................975 

WRC200..................................975 

WRPCLG.................................941 

WRPCMD................................941 

WRPCSM................................941 

WRPCWH1..............................941 

WRPCWH2..............................941 

WS3........................................939 

WS4........................................939 

WS6........................................939 

WSK2V....................................942 

WT1........................................940 

WTC200A................................971 

WTC400C...............................976 

X46FN...................................1066 

X48N.....................................1066 

XL8525.................................1044 

XL8525D...............................1044 

XL8548CME..........................1044 

Y1276....................................1063 

Y1276D.................................1063 

Y1278....................................1063 

Y1278D.................................1063 

Y1279....................................1063 

Y1279D.................................1063 

Y1676D.................................1062 

Y420......................................1044 

Y46CME................................1044 

Y613ME.................................1047 

Y8210...................................1046 

Y8212....................................1046 

1448

www.apextoolgroup.com

Industrial Hand Tools 

Apex Tool Group 

World Headquarters 

14600 York Road, Suite A 

Sparks, MD 21152 

www.apextoolgroup.com 

Customer Service U.S. 

T ELEPHONE: 

North .............. 866 907 9706 

South .............. 866 907 9706 

Midwest ......... 866 907 9716 

West/SW ........ 866 907 9716 

Hardware ...... 919-362-1670 

FAX: 

North ............. 800-854-5137 

South ............. 800-854-5139 

Midwest ........ 800-854-5138 

West/SW ....... 800-546-7312 

Hardware ...... 877-387-0415 

Export ............ 919-387-2402 

Customer Service Canada 

Phone ............ 705-728-3888 

Fax ................ 800-403-8665 

Distributed By 

100M/Printed 0213FC/USA/Apex No. T550859 © 2013, Apex Tool Group, LLC 

Specifications subject to change without notice.

Apex - Catalogue complet

Create successful ePaper yourself

Delete template?

Save as template?