Proto - Clés

Leverage wrenches
Facom ® Satin Leverage Wrenches
> > Satin finish provides corrosion resistance and a slip resistant grip.
> > Separate removable handle used when extra leverage is needed.
> > 12 point, box end allows for fine indexing, helping to improve speed
and access.
> > 30° offset handle helps clear obstructions.
Outside Head Width Head
Overall
MM 12
1 (in)
Thickness 1 (in) Length (in) Weight (lbs) Use Handle
24 FM-54A.24 1-1/2 21/32 7-3/32 0.89 FM-54.M1B
30 FM-54A.30 1-57/64 23/32 8-9/32 1.09 FM-54.M1B
32 FM-54A.32 1-59/64 23/32 9-7/16 1.60 FM-54.M2B
36 FM-54A.36 2-1/8 25/32 9-27/32 1.71 FM-54.M2B
41 FM-54A.41 2-7/16 7/8 10-5/8 2.05 FM-54.M2B
46 FM-54A.46 2-23/32 29/32 11-1/32 2.61 FM-54.M3B
50 FM-54A.50 2-63/64 1 11-5/8 3.11 FM-54.M3B
55 FM-54A.55 3-3/16 1-1/8 11-11/16 3.27 FM-54.M3B
60 FM-54A.60 3-35/64 1-3/16 13-25/32 4.95 FM-54.M4B
65 FM-54A.65 3-55/64 1-5/16 14-3/8 5.39 FM-54.M4B
70 FM-54A.70 4-9/64 1-13/32 14-3/8 6.05 FM-54.M4B
Facom ® Satin Leverage Wrench Handles
> > Satin finish provides corrosion resistance and a slip resistant grip.
Product #
Overall
Length (in)
Weight (lbs)
FM-54.M1B 18 1.35
FM-54.M2B 23-1/2 2.44
FM-54.M3B 30 4.73
FM-54.M4B 33-9/32 6.31
Facom ® 11 Piece Metric Leverage
Wrenches & Handles Set
Product #: FM-54.P9M
> > Satin finish provides corrosion resistance and a slip resistant grip.
> > Separate removable handle used when extra leverage is needed.
>
> > 30° offset handle helps clear obstructions.
> 12 point, box end allows for fine indexing, helping to improve speed and access.
12 MM Overall Length (in)
FM-54A.24 24 7-3/32
FM-54A.30 30 8-9/32
FM-54A.32 32 9-7/16
FM-54A.36 36 9-27/32
FM-54A.41 41 10-5/8
FM-54A.46 46 11-1/32
FM-54A.50 50 11-5/8
FM-54A.55 55 11-11/16
FM-54.M1B Handle 18
FM-54.M2B Handle 23-1/2
FM-54.M3B Handle 30
Weight (lbs): 29.76
6 6 POINT 8 8 POINT 12 12 POINT SPL SPLINE hex HEX OPEN
676 Country of origin accurate at time of printing, consult www.protoindustrial.com for updated information.