Proto - Clés

Wrenches
Facom ® 16 Piece Short Satin Metric
Angle Open-End Wrench Set
Product #: FM-34.JL16T > > Satin finish provides corrosion resistance and a slip resistant grip.
> > 15°and 75° angled heads for fasteners out of standard-tool reach.
> > Short shanks and slim heads.
MM
Overall Length (in) > > Standard open end configuration.
FM-34.3.2 3.2 2-3/4
FM-34.4 4 2-3/4
FM-34.5 5 2-61/64
FM-34.5.5 5.5 2-61/64
FM-34.6 6 3-5/32
FM-34.7 7 3-5/32
FM-34.8 8 3-35/64
FM-34.9 9 3-35/64
FM-34.10 10 3-15/16
FM-34.11 11 3-15/16
FM-34.12 12 3-15/16
FM-34.13 13 4-23/32
FM-34.14 14 4-23/32
FM-34.15 15 5-33/64
FM-34.16 16 5-33/64
FM-34.17 17 5-33/64
Weight (lbs): 1.12
Angle Open End wrenches
Facom ® Satin Metric Tappet Open End Wrenches
> > Satin finish provides corrosion resistance and a slip resistant grip.
>
> Used to tighten collars, lock nut rings and help seal packing nuts on
hydraulic cylinders.
> > Ultra thin profile for use in close quarters.
> > Openings designed to cover tappets, screws and lock nuts with
excessive overhang which helps improve access.
> > For use in low torque applications.
> > Standard open end configuration.
MM
Outside Head Width Head Outside Head Width Head
Overall
1 (in) Thickness 1 (in) 2 (in) Thickness 2 (in) Length (in) Weight (lbs)
6 x 7 FM-31.6X7 5/8 3/32 5-27/32 3/32 5-53/64 0.06
8 x 9 FM-31.8X9 25/32 3/32 6-29/32 3/32 6-57/64 0.08
10 x 11 FM-31.10X11 25/32 3/32 6-29/32 3/32 6-57/64 0.08
12 x 13 FM-31.12X13 1-7/64 9/64 8-9/32 9/64 8-17/64 0.17
14 x 15 FM-31.14X15 1-9/64 9/64 8-9/32 9/64 8-17/64 0.17
16 x 17 FM-31.16X17 1-33/64 11/64 1-11/16 11/64 9-27/32 0.31
18 x 19 FM-31.18X19 1-33/64 11/64 1-11/16 11/64 9-27/32 0.30
FULL POLISH Satin BLACK OXIDE BLACK Chrome Insulated
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. 645
+1.800.800.TOOL · Fax: +1.770.648.9108​ · www.protoindustrial.com