SKF - Linear Motion Standard Range
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 Tables: driven and not driven<br />
General<br />
Fig. 2<br />
GCL standard slides<br />
Slide top and base of steel. The slides<br />
are provided with standard patterns of<br />
mounting holes. The slide top carries tapped<br />
holes, the base plate counterbored holes<br />
for cylindrical screws to DIN 912. The slides<br />
are fitted with <strong>SKF</strong> precision rail guides with<br />
crossed roller units. Internal stops serve as<br />
stroke limit.<br />
RM standard slides<br />
Especially small design. Slide top of steel,<br />
guidance via <strong>SKF</strong> precision rails with<br />
double-sided centre rail and crossed roller<br />
units. Internal stops serve as stroke limits.<br />
For dimensions, see table on page 208.<br />
For dimensions, see table on page 204.<br />
GCLA standard slides<br />
Slide top and base of black anodised<br />
aluminium. In other respects, the design<br />
corresponds to that of the GCL slides except<br />
that they are lower in height.<br />
For dimensions, see table on page 206.<br />
Fig. 3<br />
Fig. 4<br />
Fig. 5<br />
SSM and SSK dovetail slides<br />
Slide top and base of grey cast iron.<br />
The slides are provided with standard<br />
patterns of mounting holes. Top and base<br />
plate both carry tapped holes. The slides<br />
have a lead screw drive. The SSM design<br />
has a micrometer knurl with vernier ring,<br />
while the SSK design is fitted with a hand<br />
crank. Both designs are fitted with a lateral<br />
locking device.<br />
For dimensions, see table on page 210.<br />
TO and TS compact cross tables<br />
Table top, centre and base of black<br />
anodised aluminium with central viewing<br />
hole. The slides are fitted with <strong>SKF</strong> precision<br />
rail guides incorporating crossed roller units.<br />
The TO design does not have a drive but<br />
is provided with one lateral locking device<br />
per axis. The TS design has a micrometer<br />
attachment that is springloaded in one<br />
direction. In addition, one lateral locking<br />
device is fitted per axis.<br />
For dimensions, see table on page 213.<br />
RSM and RSK precision slides<br />
Slide top and base of grey cast iron.<br />
The slides are provided with standard<br />
patterns of mounting holes. The slide<br />
top carries tapped holes, the base plate<br />
counterbored holes for cylindrical screws to<br />
DIN 912. They are fitted with <strong>SKF</strong> precision<br />
rail guides incorporating crossed roller units.<br />
The slides have a lead screw drive.<br />
The RSM design has a micrometer knurl<br />
with a vernier ring, while the RSK design<br />
is fitted with a hand crank.<br />
For dimensions, see table on page 214.<br />
196
Change language