Timken - Spherical Roller Bearing Solid-Block Housed Units
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS<br />
EC Series<br />
EC Series<br />
The reduced eccentric offset of our ec series locking collar<br />
results in a secure shaft lock that is designed not to release from<br />
a properly prepared shaft. ec series housed units also are suitable<br />
for reversing applications.<br />
You Have Choices<br />
For the EC series, you can select from many seal configurations<br />
and housing styles, which are shown on page C-130.<br />
Housings<br />
• Two-bolt pillow blocks.<br />
• Four-bolt pillow blocks.<br />
• Flange blocks.<br />
• Piloted flange cartridges.<br />
• Take-up blocks.<br />
• Cartridge blocks.<br />
• Hanger blocks.<br />
Fig. C-45. EC series eccentric lock.<br />
Seals<br />
• Labyrinth: DuPont Teflon (T).<br />
• Triple-lip: nitrile rubber (M), urethane (O) and<br />
DuPont Viton (N).<br />
• Double-lip: nitrile rubber (B) and DuPont Viton (C).<br />
• Steel and urethane closed-end covers (CS).<br />
• Steel and urethane open-end covers (CJ) with:<br />
• DuPont Teflon (T).<br />
• Triple-lip seal (DR).<br />
• V-ring seal (VR).<br />
• Piloted flange cartridge backing plates (HSY) with:<br />
• Triple-lip seal (DR).<br />
• Flange block backing plates (UFP).<br />
• V-ring (VR).<br />
<strong>Timken</strong> ® HOUSED UNIT CATALOG C-129