MAY 2016

Recommendations

Info

National Fly Weight Swing-Gate Machine N a t i o n a l T a t t o o S u p p l y W W W . N A T I O N A L T A T T O O . C O M Frame Kit REBUILD KIT Custom Engrav- The National Fly Weight Swing-Gate machine head comes assembled but without a tube, grip or needle bar. The Fly Weight Swing-Gate machine was designed for those of you who like a light weight but full sized machine but also want the added convenience of the Swing-Gate style of frame. Custom engraving is available on this machine for an additional $15.00. ($30.00 re-stocking fee for custom engraved machines/frames.) Approximate weight, without tube: 10 wrap=8 oz. 8wrap=7 oz. MADE IN THE U.S.A. 24 Powder Coated Frame Colors available on the Fly Weight Machine. From Right to Left: Black Cherry, Black Chrome, Blood Red, Blue, Bubble Gum Pink, Chrome, Copper Vein, Copper, Frog Green, Gold Vein, Gold, Granite, Hunter Green, Neon Pink, Orange, Purple, Rust, Silver Vein, Silver, Unplated (-$10.00), Teal, White, Yellow and Black. The following parts come standard on the National Fly Swing-Gate Machine. Use this list as a reference when looking for replacement parts. NTH24 1 1/4" Coils 5/16" core 8 Wrap, Top-Hat style (Liner) NMA24 1 1/4" Coils 5/16" core 8 Wrap, Original style (Liner) PNTH24 1 1/4" Coils 5/16" core 8 Wrap, Pre-Soldered, Top-Hat Style(Liner) PNMA24 1 1/4" Coils 5/16" core 8 Wrap, Pre-Soldered, Original Style(Liner) TH24 1 1/4" Coils 5/16" core 10 Wrap, Top-Hat style (Shader) MA24 1 1/4" Coils 5/16" core 10 Wrap, Original style (Shader) PTH24 1 1/4" Coils 5/16" core 10 Wrap, Pre-Soldered, Top-Hat Style(Shader) PMA24 1 1/4" Coils 5/16" core 10 Wrap, Pre-Soldered,Original Style(Shader) MA33S Stainless Steel Binding Post with 6-32 Silver Contact Screw MA34S 6-32 Silver Contact Screw MA33A Stainless Steel Rear Post MA50 47uf Capacitor on Shaders MA49 22uf Capacitor on Liners SHMA40 Front Spring-Long, Medium (.018)-w/o Contact Pt.(Gap.050)(Liner) SHR21 Rear Spring-Long, Thick (.020)(Liner) SHMA83 Front Spring-Long, Thin (.015)-w/o Contact Pt. (Gap.080)(Shader) SHR42 Rear Spring-Long, Medium (.018)(Shader) MA31 Armature bar FSMA FSMA series (5 5/8" total length) Needle Bars MA59L Large O-Rings (pack of 30) SPRING-C Stainless Steel Spring Cap NMA51SS Stainless Steel Socket Cap Screw 8-32x3/8" for rear springs (30) MA53 Socket Cap flat head coil screws 8-32x1/2" (30) SGFHSS Stainless Steel Flat Head screw for swing-gate arm 6-32x3/8" (30) NMA38SS Stainless Steel Wing nut with 8-32 screw Price: $179.00 Catalog #: SP-FMS Type: FLY WEIGHT MACHINE HEAD (NO TUBE, GRIP OR NEEDLE BAR) Price: $159.00 Catalog #: FSK Type: FLY WEIGHT MACHINE KIT (UNASSEMBLED, NO INSRUCTIONS, TUBE, GRIP OR NEEDLE BAR) Price: $123.00 Catalog #: FSF Type: FLY WEIGHT FRAME ONLY Price: $16.50 Catalog #: REBLD-FS Type: FLY WEIGHT REBUILD KIT (EVERYTHING YOU NEED TO REBUILD YOUR MACHINE EXCEPT FRAME, COILS, TUBE, GRIP AND NEEDLE BAR.)
T o O r d e r C a l l : 8 0 0 - 310- 2 9 9 6 The Welker Rotary is a precision-made tattoo machine. Here are a few of the key features: 1. All American aircraft grade 6061 aluminum and 304 stainless steel construction (no plastic parts) similar to medical grade instruments. 2. All American made 440 stainless steel bearings. 3. Powered by top of the line German made Faulhaber DC micro-motor with 2.6 Watt of output power and 9900 rpm of no-load speed @12volts. Machine will run approximately at 125cps @12 volts and drop approximately 14 cps per 1 volt reduction in power fully loaded up with needles working the canvas. 4. RCA power connection (clip cord connection not advised and will void warranty if an attachment is used). 5. Needle retention devise locks to the left and right to facilitate needle loading. The amount of pre-bend given to the needle determines tension. The retention system can be used in the loaded (tension) position when using a t-tech type of adaptor for exchangeable needle tips as the guide wheel of the retention system guides the needle down the center of the tube. 6. Crankshaft driven forward and rearward slides. 7. Comes in 4 different strokes: Short- 2.5mm(.100”), Medium- 3.2mm(.125”), Long- 3.8mm(.150”) and Extra Long- 4.5mm(.175”). 8. Comes in 10 different colors: Black, Gray, Gold, Orange, Red, Pink, Purple, Blue, Green and Silver. 9. Weighs 120g ( 4.25oz) 10. Produced in house at Welker machines a division of Eternal Ink Inc. 11. Technical Patent Pending drive system. THE DUAL-PLANE DIFFERENCE The Welker Rotary is referred to as being Dual-Plane Balanced. Our Rotary Dual-Plane Balancing system eliminates the up-and-down shaking caused by the needle and armature bar often associated with a coil tattoo machine. Unlike other standard rotary machines, the up-and-down shaking caused by the movement of the front slide, has been cancelled out by our Dual-Plane design. On a standard rotary machine, the side-to-side shaking, (the motion that unfortunately draws ink up and out the top of the tube of a rotary machine), is a result of an eccentric cam-type drive system attempting to balance the up-and-down motion. This too, including the leaking ink, has been canceled out by our Dual-Plane design. Therefore, after canceling these effects, we achieve a stable platform of operation with all components working within their optimal range. Not only does this vastly reduce the fatigue experienced by the artist, it also reduces the stress on the motor from shaft flex and various other factors as well. Made in the USA Price: $349.00 Catalog #: WR-BKM Type: Black Medium Stroke Price: $349.00 Catalog #: WR-BLL Type: Blue Long Stroke Price: $349.00 Catalog #: WR-GDL Type: Gold Long Stroke Price: $349.00 Catalog #: WR-GNL Type: Green Long Stroke Price: $349.00 Catalog #: WR-GYM Type: Gray Medium Stroke Price: $349.00 Catalog #: WR-OGL Type: Orange Long Stroke Price: $349.00 Catalog #: WR-PKM Type: Pink Medium Stroke Price: $349.00 Catalog #: WR-PPM Type: Purple Medium Stroke Price: $349.00 Catalog #: WR-PTM Type: Platinum Medium Stroke Price: $349.00 Catalog #: WR-RDL Type: Red Long Stroke 25
Page 1 and 2: Your Professional Tattoo Supplier S
Page 3 and 4: N a t i o n a l T a t t o o S u p p
Page 7 and 8: C r o s s N a t i o n a l T a t t o
Page 9 and 10: T o O r d e r C a l l : 8 0 0 - 310
Page 23: T o O r d e r C a l l : 8 0 0 - 310
Page 75 and 76:
T o O r d e r C a l l : 8 0 0 - 310
Page 77 and 78:
T o O r d e r C a l l : 8 0 0 - 310
Page 79 and 80:
N a t i o n a l T a t t o o S u p p
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
T o O r d e r C a l l : 8 0 0 - 310
Page 110 and 111:
110
Page 112:
112
show all

MAY 2016

Create successful ePaper yourself

Delete template?

Save as template?