Main catalogue 2016/17

Service: +49(0)7191/95700
NEW! Ballet bar wall bracket ELEGANCE
1 piece, epoxy coated in silver. Height of support: 20.2
cm, width: 15 cm; depth: Wall-outside of the bar 18 cm;
depth: Wall-Inside of the bar 13.5 cm. Mounting plate
dimensions: 10 x 8 x 0.6 cm. Weight: 1.69 kg. Suitable for
bars with a diameter of 4 cm. Also suitable to connect 4
ballet bars without any gaps. Ballet bars are not included.
Recommended distance between wall brackets: 2 m max.
G1683 double
pc
G1682 single
pc
Ballet bars
1 2 3
Simple floor mounting
1 NEW! Floor attached support for double ballet bars
Floor attached support Stand for two ballet barre to
mount to the ground. The mounting plate is screwed at
four points to the ground. Through this abillity, the ballet
bar can be mounted perfectly in front of mirror walls or
not self bearing walls. The closed mounting plates can
hold pressure from any direction. The ballet barre can
be used for a variety of fitness exercises. The support
is wide enough that two ballet bars can be connected
without building a whole, so we have one continious ballet
bar. Drilling into the ballet bar is not necessary. The floor
attached support can be combined with the wall bracket
G1682 and is ideally suited for individual solutions.
Delivery: one piece; Height the higher ballet bar of the
two: 101 cm; Diameter of the floor attachment support:
77,5 mm; Space between the two ballet bars 19 cm; Base
Dimensions: 18 x 10 x 0.6 cm; Weight: 5,75 kg. For ballet
bar with 40 mm diameter. Including mounting material.
It is recommended a maximum distance of 2 meters
between the supports. Delivery without ballet barre.
G1694 for 2 ballett bars up to Ø 40 mm
pc
2 NEW! Floor attached support, height adjustable
Height adjustable from 79.5 cm to 118 cm, equally usable
for adults, teenagers and children. Quantity: 1 piece;
14 height settings. For ballet bars up to 40 mm Ø. Incl.
Fastening material.
G1693 for ballett bar up to Ø 40 mm
pc
3 NEW! Floor attached support
Can be combined with the wall bracket G1682, therefore
suitable for individual solutions. Delivery quantity: 1
piece; Height: 103 cm. For ballet bars up to 40 mm Ø.
Incl. attachment material.
G1692 for ballett bar up to Ø 40 mm
pc
NEW! Ballet bar
Ballet bar made of southern yellow pinewood. Edges
are smoothly finished to avoid any unnecessary
harm.
G1695 1 m
pc
G1696 1.5 m
pc
G1697 2 m
pc
Ballet Wall Mounting
made of stainless steel. A bar with 250 cm length needs
3 wall mountings! Delivery without ballet bar.
G1740 single
pc
G1741 double
pc
Ballet Wall Mounting
made of stainless steel. The Wall mounting can be adjusted
in height from 35 upto 130 cm by hand. Includes
mounting rail 28 x 14 mm, 100 cm length. Perfect for
Ballet, Rehabilitation and Gymnastics. 3 wall mountings
are needed for a Ballet bar of 250 cm. Delivery with
out Ballet bar.
G1742 Height adjustable, single
pc
G1743 Height adjustable, double
pc
Ballet Bar
Made from ash wood, Ø 40 mm. Ballet bar for wall
fixings. If necessary, bar can be cut to the requested
length - please specify.
Shipping weight: 3.00 kg
G1629 250 cm
pc
Ballet Bar
250 cm long made from ash wood, Ø 40 mm. Ballet
bar for wall fixings (same as G1629). Milled off/
reduced in diameter for use with sleeve.
Shipping weight: 3.00 kg
G1685 One end milled off
pc
G1686 Two ends milled off
pc
Connector Sleeve for Ballet Bars
Stainless steel tube Ø 40 mm, 30 cm long, to connect
ballet bars safely and smoothly.
G1687
pc
Ballet Wall Mounting
- single or double
- fix and height adjustable
386