08.09.2016 Views

NEWHOLLAND T7030.40.50.60 Repair Mannual

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

WORKING ARM ­ HITCH Electronic draft control<br />

11. Set the engine speed until it is stable with no signs<br />

of hunting or surging.<br />

12. Raise the control lever to between 70 % and 90 % to<br />

start the calibration sequence.<br />

BAIL06CCM443FVA 5<br />

NOTE: The lower central display will change from "CAL" to<br />

"0" to indicate the start of calibration. During calibration the<br />

linkage is automatically raised and lowered a small amount<br />

3 times, within 2­3 minutes.<br />

Each raise and lower is accompanied by a count on the<br />

display from ’0’ to ’2’.<br />

BAIL06CCM386AVB 6<br />

13. When the lower central display shows "End" the calibration<br />

is complete.<br />

BAIL06CCM613AVA 7<br />

14. Lower the linkage using the position control lever.<br />

2 3/5/2007<br />

H.10.D / 25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!