Larchfield PPE Catalogue

ed & Black
BOOK of ppe
Personal protection equipment and workwear
Dräger
Rock Fall
Bollé Safety
Extensive Stock
Outstanding Reputation
leading brands
Call: 01732 369757
Fax: 01732 369767
www.larchfield-aerospace.com
email: sales@larchfield-aerospace.com

Contents
Hazard Workwear 2-19
Clothing & Workwear 20-35
Hand Protection 36-65
Safety Footwear 66-91
Respiratory Protection 92-125
Eye & Face Protection 126-153
Head Protection 154-163
Hearing Protection 164-179
Harness & Safety Equipment 180-183
Washroom 184-195
First Aid 196-200
Index 201-202

Hazard Workwear
Buying Guide
Highways Agency: Chapter 8 Traffic Signs Manual
(Part 2) - Operations: Para 06.3.2
The workforce and supervisory staff should wear high visibility warning clothing at
all times when on site. Clothing shall comply with
EN 471:2003/EN20471:2013 Class 2 or 3 (Class 3 on motorways and other
high speed roads) and shall comply with the requirements of paragraph 4.2.3(b)
of the Standards. The colour of the clothing shall normally be fluorescent yellow or
fluorescent orange-red complying with Table 2 of the Standards.
The retroreflective material shall be to Class 2 as defined in Table 5 of the Standards.
In addition, on motorways and other high speed roads, high visibility jackets or
coveralls shall have full length sleeves meeting the requirement of paragraph 4.2.4
of EN 471:2003/EN20471:2013. This requirement may be varied to three-quarterlength
sleeves where a risk assessment shows full-length sleeves would present
increased risk due to the activity being undertaken.
Staff should also wear high visibility trousers complying with Class 1 of EN
471:2003/EN20471:2013 where the carrying of large items of equipment or other
activities may at any time obscure the visibility of the high visibility jacket or vest.
Highways Agency: Temporary Traffic Management On High Speed Roads:
Good Working Practice (Section W7).
Operatives who are engaged in activities on live traffic lanes should wear High
Visibilty Garments EN 471:2003/EN20471:2013 Class 3.
Safety Standards Key
To aid selection, garments in this catalogue now carry icons denoting the
EN Safety Standards to which they comply. From October 2013 all newly
Certificated High Visibility Garments must comply with the NEW
Standard, EN ISO 20471:2013
EN 471:2003/EN20471:2013 –
High Visibility Warning Clothing
EN 471:
3 classes of protection
EN 343:
EN 342:
GO/RT 3279
EN 343 – Protection Against Rain
3 classes of waterproofness and breathability
EN 342 – Protection Against Cold
(Temperatures 25%.
2

3

Hazard Workwear
High Visibility Clothing
4
3
Keep Safe EN 471 High Visibility Jacket
2
EN 471:
CONFORMS TO EN 471 CLASS 3
2003 +A1:2007
PU coated, waterproof outer fabric, collar-concealed two-piece unlined
hood, and polyester quilted lining.
• Map pocket, internal, and two outside lower jetted pockets
EN 343
• Studded storm placket, storm cuff
FABRIC ONLY
• Size: S, M, L, XL, XXL, XXXL, XXXXL
• Colour: Saturn Yellow
Code: 305066Each £36.99
1
Keep Safe EN 471 High Visibility Overtrousers
2
EN 471:
CONFORMS TO EN 471:1
2003 +A1:2007
PU coated waterproof outer fabric.
• Fully taped seams
• Reflective tape
EN 343
• Size: S, M, L, XL, XXL
FABRIC ONLY
• Colour: Saturn Yellow
Code: 343493Pair £23.99
Keep Safe EN 471 High Visibility Bomber Jacket
EN 471:
CONFORMS TO EN 471 CLASS 3
PU coated, waterproof outer fabric with polyester quilted lining and
collar-concealed two-piece unlined hood.
• Stud fastening storm placket, elasticated cuff, internal, mobile phone,
EN 343
map, and two lower slanted jetted pockets
FABRIC ONLY
• Reflective tape
• Size: S, M, L, XL, XXL, XXXL
• Colour: Saturn Yellow
Code: 321146Each £39.99
• Colour: High Visibility Orange
Code: 305015Each £39.99

High Visibility Clothing
Hazard Workwear
EN 471:
EN 343
FABRIC ONLY
EN 471:
Keep Safe EN 471 High Visibility Jacket
CONFORMS TO EN 471 CLASS 3
PU coated waterproof outer fabric, elasticated storm cuffs, and step collar with
detachable hood.
• Storm flap
• Two outside jetted, one inside patch pockets
• Size: S, M, L, XL, XXL, XXXL
• Colour: High Visibility Orange
Code: 192461Each £36.99
Keep Safe EN 471 High Visibility Fleece Safety Jacket
CONFORMS TO EN 471 CLASS 3
• Lightly elasticated cuffs, waist hem, and comfort collar
• Zip front
• Two side lower welted pockets
• Reflective tape
• Size: S, M, L, XL, XXL, XXXL
• Colour: Saturn Yellow
Code: 343448 Each £45.99
2
EN 471:
2003 +A1:2007
Keep Safe EN 471 High Visibility PU Reversible Safety
Body Warmer
CONFORMS TO EN 471 CLASS 2
PU fabric with zip fastening and quilted lining.
• Double band reflective tape
• Size: S, M, L, XL, XXL
• Colour: Saturn Yellow
Code: 384077Each £35.99
2
Keep Safe EN 471 High Visibility Softshell Safety
EN 471:
Jacket
CONFORMS TO EN 471 CLASS 3
Quick drying, lightweight, easy to wear stretch softshell fabric that’s wind resistant
and has a durable water repellent finish.
• Adjustable shockcord hem and elasticated cuffs
• Waterproof zippers, inner zip guard
• Chest and two lower pockets
• Size: S, M, L, XL, XXL
• Colour: Saturn Yellow
Code: 305124Each £55.99
5

Hazard Workwear
High Visibility Clothing
3
2
EN 471:
2003 +A1:2007
2
2
EN 471:
2003 +A1:2007
Keep Safe EN 471 High Visibility Polo Shirt
• Contrasting navy collar
• Size: M, L, XL, XXL, XXXL
• Colour: Saturn Yellow
Long sleeved
CONFORMS TO EN 471 CLASS 3
Code: 362446 Each £23.99
Short sleeved
CONFORMS TO EN 471 CLASS 2
Code: 362467 Each £19.99
3
2
EN 471:
2003 +A1:2007
EN 343
FABRIC ONLY
6
Keep Safe EN 471 High Visibility Waterproof Jacket
CONFORMS TO EN 471 CLASS 3
PU coated breathable, waterproof outer fabric tested to EN 343, with hood and
stud adjustment at wrist.
• Fully taped seams
• Two side pockets with Velcro ® flaps
• Size: S, M, L, XL, XXL, XXXL
• Colour: Saturn Yellow
Code: 321170 Each £49.49
Keep Safe EN 471 High Visibility Waterproof Trousers
CONFORMS TO EN 471 CLASS 1
PU coated breathable, waterproof outer fabric tested to EN 343, with fully taped
seams.
• Elasticated waistband
• Size: S, M, L, XL, XXL, XXXL
• Colour: Saturn Yellow
Code: 321171Pair £31.49
2
EN 471:
2003 +A1:2007
Keep Safe EN 471 High Visibility Waistcoat
CONFORMS TO EN 471 CLASS 2
• Velcro ® fastening
• Size: M, L, XL, XXL
• Colour: Saturn Yellow
Code: 384065Each £5.49
• Size: M, L, XL, XXL
• Colour: High Visibility Orange
Code: 384074Each £5.49
2
2
2
EN 471:
2003 +A1:2007

d
Stand
roup G arRailway
High Visibility Clothing
Hazard Workwear
3
2
EN 471:
2003 +A1:2007
Keep Safe EN 471 High Visibility Sleeved Waistcoat
CONFORMS TO EN 471 CLASS 3
• Velcro ® fastening
• Size: M, L, XL, XXL
• Colour: Saturn Yellow
Code: 384066Each £16.99
3
2
EN 471:
2003 +A1:2007
2
EN 471:
2003 +A1:2007
Keep Safe EN 471 High Visibility T-Shirt
• Size: S, M, L, XL, XXL
GO/RT 3279
GO/RT 3279
• Colour: Saturn Yellow
only for orange
CONFORMS TO EN 471 CLASS 2
Code: 362453 Each £14.99
• Colour: High Visibility Orange
CONFORMS TO EN 471 CLASS 2 & GO/RT 3279
Code: 362403Each £15.99
2
2
2
EN 471:
2003 +A1:2007
Keep Safe EN 471 High Visibility Sleeved Waistcoat
CONFORMS TO EN 471 CLASS 3
• Velcro ® fastening
• Size: M, L, XL, XXL
• Colour: High Visibility Orange
Code: 384099 Each £16.99
2
Keep Safe EN 471 High Visibility Go/Rt 3279
EN 471:
2003 +A1:2007
Breathable Road Trousers
CONFORMS TO GO/RT 3279 AND EN 471 CLASS 1
PU coated breathable, waterproof outer fabric.
• Fully taped seams
EN 343
• Reflective tape
FABRIC ONLY
• Size: S, M, L, XL, XXL
• Colour: High Visibility Orange
Code: 343475Pair £36.99
1
7

Hazard Workwear
Flame Resistant and Retardant
Clothing
8
Flame Retardant Standards
EN 11611
Tensile strength
Tear strength
Burst strength
Seam strength
Dimensional change
Requirements of leather
Limited flame spread
Molten droplets
Heat transfer (radiation)
Electrical resistance
EN 11612 As above plus:
Heat resistance
Limited flame spread (A)
Convective heat (B)
Radiant heat (C )
Molten aluminium splash (D)
Molten iron splash (E)
Contact heat (F)
EN 14116
Flame spread
Tensile strength
Tear strength
Seam strength
EN 11611:
EN ISO 11612:
2008
EN ISO 14116:
2008
Anti-Static Standards
EN 1149
Protective clothing –
Electrostatic properties
Anti-static clothing suppresses static
EN 1149-5:
charge, thereby preventing sparks,
which might cause a fire or explosion
EN 1149-5 is a part of a larger system
EN 1149 consists of the following parts:
EN 1149-1:
Test methods for the measurement of surface
EN 1149-5:
resistance
EN 1149-2:
Test methods for the measurement of the
electrical resistance through a material (vertical
resistance)
EN 1149-3:
Test methods for the measurement of charge
decay
EN 1149-4:
Garment test method (under development)
EN 1149-5:
Performance requirements
EN 343:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: E
2003 +A1:2007
2005 2006
2007 2008
Arc Standard
EN 61482-2:2009
Live working-protective
clothing EN 1149-5: against the
thermal hazards of an
electric arc – Part 2
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cla
EN 1149-5: EN 1149-5:
Water Penetration and Breathability
EN 343
Protection against weather
elements
Hi-Visibility
EN 471
Reflective materials
used in Hi-Visibility
EN 1149-5:
EN 1149-5:
clothing
Chemical
EN 471:
2003 +A1:2007
EN 1149-5:
EN 61482-2:
2009
EN 1149-5:
EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cla
EN 13034
Protection against
chemicals
Cold Weather
EN 14058
Protection against
extreme weather
1
x
x
EN 1149-5:
EN 1149-5:
EN 1149-5:
xEN EN 1149-5: 1149-5:
x
EN 13034:
EN 14058:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cla
2005 +A1:2009
2004
Detachable Lining
E

ROOTS FLAMEBUSTER COVERALLS
Hazard Workwear
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
2008 2006
2007 2008 2006
EN ISO 11612:
2008
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Cl
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cl
EN 61482-2:
EN 61482-2:
2009
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cl
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: Class EN 1149-5: Class 1 - Type A 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cl
2006
2008 2007 2008 2006 2006 2006 2006 2006
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 11611:
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A 2008 Class 1 - Type A Class 1 - Type A 2006 Class 1 - Type A 2007 Class 1 - Type A 2008 Cl
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN ISO 11612:
2008
EN 11611:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 61482-2: 1149-5: 1149-5: Class 1 - Type A 1149-5: Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cl
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN EN
2009
Class EN ISO 1 - 11612: Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
2008
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 61482-2:
EN 1149-5:
2009
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5:
EN 1149-5: Class 1 - Type A EN 1149-5: Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cl
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 13034:
2005 +A1:2009
EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
1149-5: Class 1 - Type A 1149-5: Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Cl
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN EN
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Roots Flamebuster Nordic Coverall
RO13090
CONFORMS TO EN 340:2003, EN 1149-5, EN 11611 A1
Roots Flamebuster Classic Nordic
Coverall RO18090
CONFORMS TO EN 340, EN 1149-5, EN 11612 A1 B1 C1 F1,
IEC61482-2
• FR reflective tape
• Central zip with press stud at top
• Two zipped chest pockets and two rear pockets
• Two side swing pockets
• Two hip pockets and rule pocket
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
CLASS 2, EN 11612 A1 B1 C2 E3 F1, IEC 61482-2
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type Class 1 - Type Class 1 - Type Class 1 - Type Class 1 - Type Class 1 - Type A A A A A A Class 1 - Type A
• FR reflective tape
• Central zip with stud fastening
• Two side swing access pockets
• Two hip patch pockets, rule pocket on right leg
• Pen EN 1149-5: pocket on EN 1149-5: left sleeve EN and 1149-5: radio loop EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
• Size: 38-56" Regular Length 31" / Tall Length 33"
• Colour: Royal Blue
Regular: 342790 Each £85.99
Tall: 342791 Each £87.99
• Sizes 38-56” Regular Length 31” / Tall 33”
• Colour: Orange
Regular: 342769 Each £73.99
Tall: 342768 Each £75.99
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
• Colour: Navy
Regular: 342788 Each £85.99
Tall: 342792 Each £87.99
• Colour: Orange
Regular: 342787 Each £85.99
Tall: 342793 Each £87.99
• Colour: Red
Regular: 342789 Each £85.99
Tall: 342794 Each £87.99
• Colour: Navy
Regular: 342781 Each £73.99
Tall: 342784 Each £75.99
• Colour: Royal Blue
Regular: 342783 Each £73.99
Tall: 342786 Each £75.99
• Colour: Red
Regular: 342782 Each £73.99
Tall: 342785 Each £75.99
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Flamebuster Xtreme 310 Non
Metallic Coverall
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
RO19095
CONFORMS TO EN 340, EN1149-5, EN 11611 A1 CLASS
1,EN 11612 A1 B1 C1 E1 F1, IEC 61482-2, EN 13034 +A1
TYPE 6
• FR reflective tape
• Concealed
EN 1149-5:
nylon zip with
EN 1149-5:
velcro
EN 1149-5:
EN 1149-5:
• Two large nylon zipped chest pockets and two
rear pockets
• Two side swing pockets
• Pen pocket
• Knee pad pockets
EN 1149-5: EN 1149-5:
• Sizes 38-56" Regular Length 31"
• Colour: Red
Code: 342796 Each £119.99
• Colour: Navy
Code: 342797 Each £119.99
• Colour: Royal Blue
Code: 342798 Each £119.99
• Colour: Orange
Code: 342795 Each £119.99
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
9

Hazard Workwear
ROOTS FLAMEBUSTER
WORKWEAR
EN 471:
EN ISO 14116:
2008
EN 61482-2:
2009
BLAZETEK FLAME
RETARDANT COVERALLS
EN 13034:
2005 +A1:2009
EN 343:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
2008 2006
2007 2008 2006 2006 2006 2006
Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5
2008 2006
2007 2008 2006 2006 2006
Class 1 - Type A
Class 1 - Typ
EN 1149-5: EN 1149-5: EN 11611:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5
Class EN ISO 1 - 11612: Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
2008
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class EN 1 - 61482-2: Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
2009
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
EN 13034:
2005 +A1:2009
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
10
Roots Full Option Waterproof Parka RO1517 & Full
Option Waterproof Trousers RO1537
Conforms to EN 340 EN 343 3:3 EN 1149-5 EN 14116 INDEX 3 IEC 61482-2 EN 13034 EN
471
• FR reflective tape
• Two radio loops
• Chest pockets
• Concealed detachable hood
• Size: S, M, L, XL, XXL
• Colour: Yellow/Navy Jacket
Code: 343646 Each £160.99
• Colour: Orange/Navy Jacket
Code: 343647Each £160.99
EN 1149-5: EN 1149-5:
• Colour: Yellow/Navy Trousers
Code: 343650Pair £75.99
• Colour: Orange/Navy Trousers
Code: 343651Pair £75.99
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
BlazeTeK Anti-Static Flame Retardant Coverall
CONFORMS TO EN 11612 A1,B1,C1, EN 1149-5 & EN 11611
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
• Double stitched Pyrovatex fabric 350 gr/m 2 EN 1149-5:
EN 1149-5:
, with triple stitching at stress points
• Covered two-way zipper with large pullers
• 2 side, 2 breast, 2 back plus ruler and sleeve pen pockets
• Action back and two escape filter loops
• Heavy press-studs on collar and sleeves. Double stitched flame retardant
reflective striping on shoulders, arms & legs
EN 1149-5:
EN 1149-5:
EN 1149-5:
• Size: 36-54”
• Colour: Orange
Code: 370618 Each £82.99
• Colour: Navy Blue
Code: 370619 Each £82.99
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Typ
EN 1149-5
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5

Disposable Coveralls
Hazard Workwear
Tyvek ® 500 HV - model 125
High visibility that doesn’t wash out.
• Coverall with collar that combines type 5/6
protection and high-visibility to the highest class
(EN 20471 - class 3)
• Reflective bands at chest, arms, legs and shoulders
• Elasticated waist (glued-in), ankles and cuffs.
DuPont Tyvek ® zipper. Antistatic
• Biological protection
• Sizes: M, L, XL, XXL, XXXL
• Cartons of 25
• Colour: Hi-Viz Orange
Code: 431548 Each £16.50
CATEGORY III
TYPE 5-B
T
3
TYPE 3-B*
TYPE 6
TYPE 4
EN 1073-2: 2002
Class 1
Dupont Tychem C Standard Hooded
Coverall
conforms to en 14126 ype 3B, EN 1149-1:1995 &
EN1073-2
CHA5 Resists liquid splashes up to 2 bar.
• Particle-tight materials offering biological and
particulate radioactive protection
• Fabric resistant to common decontaminates
• Halogen free, so suitable for standard disposal
• Stitched, overtaped seams with
self-adhesive chin and zipper flaps
• Elasticated hood, waist, ankles and cuffs, plus
rubber thumb loops
• Size: S, M, L, XL, XXL
• Cartons of 25
• Colour: Yellow
Code: 431500 Each £17.99
T
3
CATEGORY III TYPE 3 TYPE 4 TYPE 5
Dupont EasySafe Hooded Coverall
conforms to EN 20811, En 1149-5,EN ISO 17491-4,
EN ISO 13982-2 & En 1073-2
• Soft and comfortable coverall
• High robustness and breathability
• Polyethylene non-woven fabric
• Size: L, XL, XXL
• Cartons of 25
• Colour: White
Code: 430912 Each £6.48
EN 1149-5: 2008* EN 14126: 2003
TYPE 6
EN 1073-2** EN 1149-1* EN 14126
CATEGORY III TYPE 5 TYPE 6 EN 1149-5-2008*
TYPE 3B
11

June 5, 2012
Hazard Workwear
Disposable Coveralls
T
3
CATEGORY III TYPE 3-B* TYPE 4 TYPE 5-B
TYPE 6
EN 1073-2: 2002 EN 1149-5: 2008* EN 14126: 2003
Class 1
12
Keep Safe XT TYPE 5/6 HOODED COVERALL
CONFORMS TO TYPE 6 – EN13034:2005+A1:2009
TYPE 5 – EN ISO 13982-1:2004+A1:2010, EN1073-2,
EN1149-5, EN14126:2003
• Latest generation of microporous laminate to offer an optimum balance
between protection and comfort
• Sealed seams bound with a barrier material to offer a high level of protection
against liquids and particles and provide enhanced seam strength
• Constructed to offer optimum body fit and freedom of movement with generous
use of fabric in the underarms, chest and waist
• Coverall with 3 piece hood, fully elasticated wrist, waist and ankle and thumb
loops. 2 way zipper and zip flap with resealable tape
• All elastication is sealed into the garment to reduce the likelihood of fibre
shedding into a process
• Wide elastication in the ankles to facilitate easy donning and doffing over work
boots
• A good barrier to light solvent splash and biological hazards
• Sizes: S, M, L, XL, XXL, XXXL
• Cartons of 40
• Colour: White
Code: 382119 Each £6.49
TYPE 5 TYPE 6 EN 1073-2 EN 1149-1
Kleenguard A30 Type 5/6 Film Laminate Suit
CONFORMS TO EN 1149 EN 1073-2
• 25% lighter than Kleenguard* A40
• Silicone and latex LOGO: free POSITIVE suitable Cyan for & Magenta paintshop use
• Respirator fit 3 piece hood
• Water repellent zip and storm flap
KCP Brand Assets
• Longer back panel for enhanced movement
• Elasticated back, cuffs, ankles and hood
• Now with thumb loops
• Size: S, M, L, XL, XXL, XXXL
• Colour: White
• Cartons of 25
Code: 383052Each £6.49

Disposable Coveralls
Flame Retardant Disposable Coveralls
Hazard Workwear
T
3
CE0120 TYPE 3 TYPE 5
EN 1073-2
EN 14126 EN 1149-1
CATEGORY III TYPE 5 TYPE 6
EN 1073-2
EN 1149-1
Keep Safe Type 5/6 Flame Retardant Short Life Hooded
Coveralls
CONFORMS TO EN 13034 (TYPE 6),
EN 13982 (TYPE 5), EN 533-INDEX 1(FR),
EN 1073-2 (PARTICULATE RADIOACTIVE PROTECTION), & EN 1149-1 (ANTI-STATIC)
Excellent chemical and particulate holdout, with limited liquid splash protection.
• Flame retardant to index 1
• Protects against radioactive dust contamination
• Suitable for asbestos removal
• Anti-static for maximum spark reduction
• Elasticated hood, ankles & wrists
• Size: M, L, XL, XXL
• Cartons of 25
• Colour: Blue
Code: 383013Each £9.49
Keep Safe XT CHEMICAL
PROTECTION HOODED COVERALL
CONFORMS TO Type 3 – EN 14605+A1:2009,Type 4 – EN 14605+A1:2009,Type 5 – EN ISO
13982-1:2004 +A1:2010,EN1073-2 ,EN1149-5,EN14126:2003
Type 3 chemical protection suits incorporating tape seam technology and designed
for use in applications where there is a high pressure hazard from inorganic
chemicals and or biological hazards or infective agents.
• Based on a yellow PE laminate engineered to offer a high barrier against
inorganic chemicals and biological hazards
• Seam technology whereby the seams have the same chemical permeation
resistance as the whole suit
• Generous pattern to maximise comfort and ease of movement with wide ankle
elastication to ease the donning and doffing process
• 3 piece hood, fully elasticated with elastication bound into the garment, 2 way
zipper and large resealable zip flap, and thumb loops
• Yellow colour to maximise visibility
• Size: S, M, L, XL, XXL, XXXL
• Cartons of 40
• Colour: Yellow
Code: 382113 Each £14.99
13

Hazard Workwear
Disposable Coveralls
Tyvek ® Classic Xpert Type
5/6 Hooded Coverall
CONFORMS TO EN 340 COMPLEX DESIGN TYPES 5 AND 6
• Setting new standard of protection in the Type 5/6
category – passes the new, more stringent Type 6
norm against liquids
• Patent pending seam technology – superior liquid
protection
• Significantly less leakage than conventional stitched
seams – even under new, more aggressive Type 4
test
• Size: S, M, L, XL, XXL, XXXL
• Colour: White
• Cartons of 25
Code: 382104 Each £7.99
Type 4/5/6 Disposable Coveralls
CATEGORY III
TYPE 5
TYPE 6
EN 1073-2
EN 1149-1
EN 14126: 2006
14
MAIN FEATURES
• Patent pending seam
technology
• Stringent quality
assurance for extremely
high garment quality
• Good breathability
thanks to air and
moisture vapour
permeability
• Silicone-free
CATEGORY III TYPE 4 TYPE 5 TYPE 6
EN 14126 EN 1149-1 EN 1073-2
Tyvek ® Classic Plus Hooded Coverall
CATEGORY 3, TYPE 4, TYPE 5, TYPE 6, CONFORMS TO EN 14126, TYPE 4B, EN 1149-1, & EN
1073-2
Protection against particulate radioactive contamination.
• Suitable for cleanroom applications
• Self-adhesive zipper flap
• Stretch thumb loop at sleeve end
• Doesn’t contain halogen compounds – easy disposal
• Size: S, M, L, XL, XXL
• Cartons of 20
• Colour: White with Blue overtaped seams
Code: 382114 Each £9.99

Disposable Coveralls
Hazard Workwear
CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1 EN 14126
TYPE 3B
CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1
Keep Safe Type 5/6 Hooded
Coveralls With Added Biological
Protection
CONFORMS TO EN 13034 (TYPE 6), EN 13982 (TYPE 5), EN
1073 (PROTECTION AGAINST RADIOACTIVE PARTICULATES),
& EN 1149-1 (ANTI-STATIC)
• Combining strong chemical protective coverall with
added benefit of better breathability
• Microporous film laminate front, SMMS fabric on
back panel
• Helps reduce body heat, vapour build-up
• Elasticated waist, wrist, ankles
• Size: M, L, XL, XXL
• Colour: White
• Cartons of 50
Code: 383002Each £6.49
Keep Safe Type 5/6 Hooded
Coveralls
CONFORMS TO EN13982 (TYPE 5), EN13034 (TYPE
6) COMPLEX DESIGN, EN1073 (PROTECTION AGAINST
RADIOACTIVE PARTICULATES), & EN1149-1 (ANTI-STATIC)
• Excellent chemical particulate holdout and limited
chemical splash
• Protects against radioactive particulates
contamination
• Suitable for asbestos removal
• Breathable and anti-static
• Elasticated hood, ankles, wrists
• Fully covered front zip
• Cartons of 50
• Size: M, L, XL, XXL, XXXL
• Colour: White
Code: 382045Each £5.99
• Size: M, L, XL, XXL
• Colour: Navy Blue
Code: 382047Each £5.99
Keep Clean Disposable Hooded
Coveralls
• Light protection from dirt and grease
• Polypropylene, zip front
• Elasticated hood, cuffs
• Size: M, L, XL, XXL, XXXL
• Colour: White
Code: 382020Each £3.49
• Colour: Blue
Code: 382019Each £3.49
15

Hazard Workwear
Disposable Coveralls
CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1
16
CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1
3M 4540+ Protective Coverall
Conforms to Category 3, Type 5 & 6, EN 1073-2,
En 1149-5
• Draping laminated material offering good
protection against dust and light liquid splashes
• Breathable back panel for reduced heat stress
• Elasticated waist and ankles
• Knitted cuff
• 3 panel hood
• 2 way zipper with sealable storm flap
• Packed in cartons of 20
• Size: S, M, L, XL, XXL, XXXL
• Colour: White
Code: 382042Each £6.49
3M 4530 Protective Coverall
Conforms to Category 3, Type 5 & 6, EN 1073-2,
EN 1149-5
Excellent chemical and particulate holdout, with
limited liquid splash protection.
• Lightweight & breathable whilst offering protection
against hazardous dust and limited liquid splash
• Material compliant to EN 14116 index 1 (must be
worn over index 2 or 3 garments)
• Knitted cuffs, elasticated waist and ankles
• 3 panel hood
• Low linting
• 2 way zipper and sealed flap
• Packed in cartons of 20
• Size: M, L, XL, XXL
• Colour: Blue
Code: 382041Each £5.99
CATEGORY III TYPE 5 TYPE 6 EN 1073-2
3M 4515 Protective Coveralls
Conforms to Category 3, Type 5 & 6, EN 1073-2,
EN 1149-5
• Breathable fabric offering basic protection against
hazardous dust and light liquid splashes
• Elasticated waist, ankles and wrist
• Two way zip with storm flap
• Low linting
• Packed in cartons of 20
• Size: M, L, XL, XXL, XXXL
• Colour: White
Code: 382035Each £3.49
• Size: M, L, XL, XXL
• Colour: Blue
Code: 382036Each £3.49

Disposable Coats & Accessories
Tyvek ® Disposable Hood
CONFORMS TO EN 14126
• Flange assembled with the overcasting
• Elastic around neck and face
• Inside seams
• Size: One size fits all
• Cartons of 200
• Colour: White
Code: 382001 Each £1.99
Tyvek ® Disposable Arm Cover
CONFORMS TO EN 14126
• Elasticated both ends
• Size: 50cm (18")
• Cartons of 200
• Colour: White
Code: 382902 Per Pair £1.99
Tyvek ® Overboots
CONFORMS TO EN 14126
• Slip retardant sole
• Leg ties
• Anti-static treatment
• Size: One size only
• Height: 48cm
• Cartons of 200
• Colour: White
Code: 382601 Per Pair £2.99
Hazard Workwear
MAIN FEATURES
• Inside seams
• Flange assembled with
the overcasting
Tyvek ® Overshoes
CONFORMS TO EN 14126
• New stitched-in slip retardant sole
• Anti-Static treatment
• Size: one size only
• Packed in cartons of 200
• Colour: White
Code: 382600 Per Pair £1.49
Tyvek ® Disposable Coat
CONFORMS TO EN 14126
• Collar, zip and two pockets
• Inside seams
• Size: S, M, L, XL, XXL
• Packed in cartons of 25
• Colour: White
Code: 300180 Each £10.99
17

Hazard Workwear
Food Industry Disposables
Disposable Coats
Cater Safe is a comprehensive range of disposable workwear ideally suited to the food
industry. The range encompasses hats, caps, coats, beard masks, aprons, sleeves and
overshoes, with most available in a variety of colours.
Disposable Oversleeves
Cater Safe Disposable Apron
• Pack of 100 disposable aprons in poly pack
• Manufactured from opaque polythene
• Size: 690×1066mm (27×42")
• Colour: White
Code: 343230 Per 100 £5.49
• Colour: Blue
Code: 343231 Per 100 £5.49
• Colour: Red
Code: 343233 Per 100 £5.49
• Colour: Green
Code: 343232 Per 100 £5.49
• Colour: Yellow
Code: 343234 Per 100 £5.49
Cater Safe Disposable Oversleeves
• Low density polyethylene (LDPE)
• Enclosed elastication both ends
• Size: 16" in length
• Cartons of 10
• Colour: Blue
Code: 343106 Pack of 100 £3.49
• Colour: Red
Code: 343109 Pack of 100 £3.49
• Colour: Green
Code: 343108 Pack of 100 £3.49
18
Cater Safe Non-Woven Coat
(Not Illustrated)
• Non-woven material
• Press stud fasteners, no pockets
• Individually packed in polybags for improved
hygiene
• Size: M, L, XL
• Cartons of 50
• Colour: White
Code: 300102Each £1.99
Cater Safe Visitor’s Coat
• Standard size polythene coat
• Front popper fasteners
• Individually packed in pocket size sachet
• Size: One size
• Cartons of 100
• Colour: White
Code: 343214Each £0.99
• Colour: Blue
Code: 300156 Each £0.99
• Colour: Yellow
Code: 343110 Pack of 100 £3.49

Food Industry Disposables
Hairnets
Disposable Hats
Hazard Workwear
Cater Safe Unisex Hairnet Metal Clipped
(Detectable)
• Comfortably controls hair
• Gives product protection
• Metal detectable
• Coarse mesh
• Colour: Blue
Code: 300460 Pack of 100 £15.99
• Close Mesh
• Colour: Blue
Code: 300461 Pack of 100 £18.99
Unisex Hairnet Metal Free
• Close Mesh
• Colour: Blue
Code: 300477 Pack of 100 £17.49
Cater Safe Pleated Mob Caps
• Soft, lightweight, total head cover
• Double stitched, fully elasticated
• Non-woven fabric
• Cartons of 10
• Colour: White
Code: 300118 Pack of 100 £4.49
• Colour: Blue
Code: 300111 Pack Of 100 £4.49
• Colour: Red
Code: 300113 Pack Of 100 £4.49
• Colour: Green
Code: 300112 Pack Of 100 £4.49
Cater Safe Balaclava With Eye Slit
• Lightweight breathable hood
• Short neck, eyeslit, elasticated hem
• Polyester warpknit fabric
• Cartons of 10
• Colour: White
Code: 300202 Each £1.49
• Colour: Red
Code: 300201 Each £1.49
• Colour: Blue
Code: 300204 Each £1.49
Disposable Beard Masks
Disposable Overshoes
Cater Safe Disposable Beard Mask
• Soft spun bonded non-woven fabric
• Size: Standard
• Cartons of 10
• Colour: Blue
Code: 382514 Pack of 100 £6.99
Cater Safe Fine Mesh Beard Snood
• Size: One size fits all
• Colour: Blue
Code: 300455 Pack of 36 £7.99
Cater Safe Disposable Overshoes
• Tough hard wearing CPE
• Elasticated top
• Size: 36mm (14")
• Colour: Blue
Code: 149003 Case of 100 £4.49
• Size: 40mm (16")
• Colour: Blue
Code: 300155 Case of 100 £4.49
19

Clothing & Workwear
New Tuf Revolution range coming soon
Order your copy of the catalogue now!
20

21

Clothing & Workwear
Weatherwear
Endurance Rainmaster
Two-Piece Suit
• Double coated PVC on polyester
• Welded main seams
• Draw string hood
• Two flapped patch pockets
• Elasticated waist trousers
• Stud fastening ankle
• Size: M, L, XL, XXL, XXXL
• Colour: Yellow
Code: 342401Each £18.99
Endurance Bib & Brace
Overall
CONFORMS TO EN343
• Wide elasticated braces
• Stud adjustable waist and ankles
• Size: M, L, XL, XXL
• Colour: Yellow
Code: 342440Each £32.49
Flexothane ® Classic
Waterproof Jacket
CONFORMS TO EN 343 CLASS 3-2 & EN 340 4820
• Fold-away hood in collar
• Zip and stud closure
• Stud/elastic sleeve narrowing
• Underarm ventilation
• Two patched pockets
• Size: S, M, L, XL, XXL
• Colour: Yellow
Code: 343539Each £45.99
• Colour: Navy Blue
Code: 343570Each £45.99
• Colour: Green
Code: 343526Each £45.99
22
Flexothane ® Classic
Waterproof Trousers
CONFORMS TO EN 343 CLASS 3-2 4500
• Elasticated waist
• Ankle stud adjustment
• Size: S, M, L, XL, XXL
• Colour: Yellow
Code: 343562Each £30.99
• Colour: Navy Blue
Code: 343571Each £30.99
• Colour: Green
Code: 343528Each £30.99

Weatherwear
Endurance Jacket
CONFORMS TO EN 343
• Drawcord hood zip, studded storm flap
• Two front patch pockets
• Size: M, L, XL, XXL
• Colour: Yellow
Code: 342461Each £39.99
Endurance Trousers
CONFORMS TO EN 343
• Elasticated waist
• Size: M, L, XL, XXL
• Colour: Yellow
Code: 342413Each £23.99
Clothing & Workwear
Flexothane ® Classic Waterproof
Coverall
CONFORMS TO EN 343 CLASS 3-1, EN 340, EN 14605 TYPE 4,
& TESTED TO EN 14786 4964
• Fold-away hood in collar
• Zip under double flap, stud closure
• Elasticated back, wind cuffs
• Ankle stud adjustment
• Size: S, M, L, XL, XXL
• Colour: Saturn Yellow
Code: 343609Each £73.99
• Colour: Orange
Code: 343622Each £75.99
• Colour: Royal Blue
Code: 015457Each £73.99
Endurance Coverall
CONFORMS TO EN343
• Drawcord hood zip, studded storm flap
• Size: M, L, XL, XXL
• Colour: Royal Blue
Code: 342425Each £55.99
• Colour: Yellow
Code: 342428Each £55.99
Endurance Mendip Padded Coverall
• Waterproof polyester/PVC with taped seams and
fully quilt lined.
• Detachable zip-on hood
• Stud fastening
• Two lower leg zips
• High visibility reflective band
• Size: M, L, XL, XXL
• Colour: Navy Blue
Code: 014275Each £47.49
23

Clothing & Workwear
Weatherwear
24
Endurance Rainmaster Lightweight
Two-Piece Suit
• Lightweight, waterproof polyester/PVC
• Taped seams, mesh vented back
• Hood folds away into collar
• Two front pockets
• Cartons of 10
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 342420Each £21.99
• Colour: Saturn Yellow
Code: 342421Each £21.99
Endurance Rainmaster Lightweight
Trousers
• Lightweight, waterproof polyester/PVC
• Taped seams, elasticated waist
• Size: M, L, XL, XXL
• Colour: Navy Blue
Code: 342430Each £13.49

Polo Shirts & T-Shirts
Endurance T-Shirt
• Ideal for embroidering with
company logo
• Twin needle sleeves and collar
• Taped neck and shoulders
• 100% heavy cotton
• Size: S, M, L, XL, XXL
• Colour: Black
Code: 362681Each £6.99
• Colour: Navy Blue
Code: 362685Each £6.99
• Colour: Royal Blue
Code: 362687Each £6.99
Endurance Heavyweight
Polycotton Polo Shirt
• Comfortable and durable
• Twin needle stitching
• 3-button placket, side vents
• Taped neck and shoulders
• 250g/m 2 50/50 polycotton
• Size: S, M, L, XL, XXL
• Colour: Black
Code: 192768Each £12.99
• Colour: Navy Blue
Code: 193676Each £12.99
Clothing & Workwear
Endurance Lightweight Polycotton Polo Shirt
• Comfortable, ideal for workplace
• Twin needle stitching
• 3-button placket, knitted cuffs/collar
• Taped neck and shoulders
• 220g/m 2 polycotton
• Size: S, M, L, XL, XXL, XXXL
• Colour: White
Code: 362679Each £8.99
• Colour: Black
Code: 362671Each £8.99
• Colour: Royal Blue
Code: 362677Each £8.99
• Colour: Bottle Green
Code: 362672Each £8.99
• Colour: Dark Navy
Code: 362675Each £8.99
• Colour: Red
Code: 362676Each £8.99
Endurance Long Sleeve Polycotton Polo Shirt
• Stylish, comfortable long-sleeved polo shirt
• Knitted cuffs and collar
• 3-button placket, extended back with side vents
• 250g/m 2 50% polyester, 50% cotton
• Size: S, M, L, XL, XXL, XXXL
• Colour: Black
Code: 362177Each £13.49
• Colour: Navy Blue
Code: 362178Each £13.49
25

Clothing & Workwear
Fleeces
Endurance Unisex Lined Fleece Jacket
310g/m 2 anti-pill fleece, fully lined with microfibre windproof fabric.
• Provides extra warmth
• Two hip pockets
• Full zip front, drawcord hem
• Size: S, M, L, XL, XXL, XXXL
• Colour: Navy Blue
Code: 342485Each £30.49
Endurance Unisex Heavyweight Fleece Jacket
380g/m 2 100% polyester anti-pill fabric.
• Elasticated cuffs
• Full length coloured zip
• Two zipped waist-level pockets
• Elasticated pull cords and toggles
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 342482Each £23.49
Softshell Jackets
26
Endurance Softshell Jacket
• Windproof and waterproof 100% polyester softshell jacket.
• Concealed hood
• 2 lower zipped pockets
• Chest zipped pocket
• Internal pockets
• Reflective trim on sleeves
• Embroidery access
• Shockcord hem adjuster
• Size: S, M, L, XL, XXL
• Colour: Navy/Black
Code: 342779Each £49.49
• Colour: Grey/Black
Code: 342780Each £49.49
Endurance Water Repellent Softshell Jacket
• Two lower zipped pockets
• One zipped upper pocket
• Size: S, M, L, XL, XXL, XXXL
• Colour: Navy Blue
Code: 342587Each £36.99
• Colour: Black
Code: 342570Each £36.99

Jackets
Concealed
hood
Zip-out
fleece
Regatta Defender III 3-in-1 Waterproof Jacket
TRA130 Waterproof, windproof polyester outer jacket with zip out 200g/m 2 antipill
fleece.
• Mesh lined, taped seams
• Concealed hood, storm flap
• Adjustable wrist straps
• Two zipped lower pockets
• Adjustable shock cord hem
• Size: S, M, L, XL, XXL
• Colour: Navy/Black
Code: 342600Each £49.99
Clothing & Workwear
Endurance Fleece Jacket
• 2 lower zipped pockets
• Elasticated cuff and hem
• Size: XS, S, M, L, XL, XXL, XXXL, XXXXL
• Colour: Dark Navy
Code: 305621Each £21.99
• Size: S, M, L, XL, XXL, XXXL
• Colour: Black
Code: 305601Each £21.99
27

Clothing & Workwear
Trousers
28
Endurance Essential Work Trousers
• Permanent, sewn-in front seams
• Concealed hook and bar fastening at waist
• Mitred rear patch and two hip swing pockets
• 245g/m 2 polycotton fabric
• Size: 30-48" Waist
• Colour: Navy Blue
• Length: Regular Leg 31"
Code: 380021Pair £20.99
• Length: Long Leg 33"
Code: 380022Pair £20.99
Endurance Cargo Trousers
• Part elasticated waistband for comfort
• Button fastening
• Multiple pockets
• Colour: Black
• Length: Regular Leg (31")
Code: 320251Pair £22.99
• Length: Long Leg (33")
Code: 320250Pair £22.99
• Colour: Navy Blue
• Length: Regular Leg (31")
Code: 371212Pair £22.99
• Length: Long Leg (33")
Code: 371214Pair £22.99

Trousers
Clothing & Workwear
Endurance Work Trousers
• Cargo style pockets
• Two front pockets, two rear pockets
• External knee pad pockets
• 260g/m 2 polycotton
• Durable
• Sizes 30-48" waist
• Colour: Black
• Length: Short Leg (29”)
Code: 380011 Pair £23.99
• Colour: Black
• Length: Regular Leg (31”)
Code: 380012 Pair £23.99
• Colour: Black
• Length: Long Leg (33”)
Code: 380013 Pair £23.99
• Colour: Navy Blue
• Length: Short Leg (29”)
Code: 380014 Pair £23.99
• Colour: Navy Blue
• Length: Regular Leg (31”)
Code: 380015 Pair £23.99
• Colour: Navy Blue
• Length: Long Leg (33”)
Code: 380016 Pair £23.99
Endurance Action Trousers
• 260g/m 2 polycotton fabric
• Button and zip fastening
• Multi zipped pockets
• Kneepad pockets
• Sizes 30-48" waist
• Colour: Black
• Length: Regular Leg (31")
Code: 380017Pair £23.99
• Colour: Black
• Length: Long Leg (33")
Code: 380018Pair £23.99
• Colour: Navy Blue
• Length: Regular Leg (31")
Code: 380019Pair £23.99
• Colour: Navy Blue
• Length: Long Leg (33")
Code: 380020Pair £23.99
Knee Pads - For use with
Endurance Knee Pad
Trousers
• Colour: Black
Code: 292208Pair £7.49
29

Clothing & Workwear
Knee Pads
Continuous pressure on the knee due to working in a kneeling position may lead to chronic conditions, such as bursitis
injuries to the cartilage. As well as helping prevent cumulative trauma, knee pads help protect against injuries and
inflammation caused by hard surfaces, pieces of gravel, and similar objects on the ground.
Knee Pads - For use with Endurance Knee Pad Trousers
• Colour: Black
Code: 292208Pair £7.49
Premium Hard Shell
Knee Pads
Long-term protection from cumulative trauma injuries.
• Hinged action hard shell, ribbed flat kneeling surface
• Premium moulded foam
• Breathable Coolmax ® inner lining
• Dual elastic straps, hook and loop closure
Code: 292205Pair £18.99
30
Heavy Duty Knee Pads
Soft, lightweight protection for all-day comfort.
• Moulded from toxin free premium foam
• Breathable Coolmax ® inner lining
• Single, replaceable elastic strap; hook and loop closure
• Size: One size fits all
Code: 292206Pair £11.99
Rubber Knee Pad
Protection from abrasion and cumulative trauma; great for heavy duty industrial
and construction applications and wet environments.
• Anti-slip ribbed surface
• Easy on/off replaceable 1" rubber strap/plastic buttons
Code: 292221Pair £8.99

Clothing & Workwear
Endurance
Polycotton Zip
Front Coverall
• Polycotton coverall
• Knee pad pockets
• Zipped chest pockets
• 2 swing pockets with side access
• Full elasticated back
• Action back
• Back pockets
• Chest: S, M, L, XL, XXL, XXXL
• Colour: Royal Blue
Code: 380025Each £30.49
• Colour: Red
Code: 380023Each £30.49
• Colour: Navy Blue
Code: 380024Each £30.49
31

Clothing & Workwear
Endurance Coveralls
32
Endurance Cotton Drill Stud
Coveralls
• 100% cotton
• Traditionally styled
• Concealed stud front fastening
• Elasticated back
• Two side swing (plus access), breast, and rule pockets
• Length: Regular Leg
• Colour: Navy Blue
• Size: XS, S, M, L, XL, XXL, XXXL
Code: 371004 Each £21.99
Endurance Polycotton Stud Coveralls
• Polycotton, for multiple washing – less shrinkage, holds colour well
• Traditionally styled
• Concealed stud front fastening
• Two stud-fasten breast, two side swing (plus access), and rule pockets
• Size: S, M, L, XL, XXL, XXXL
• Length: Regular Leg
• Colour: Navy Blue
Code: 371203Each £23.99

Overalls & Coats
Clothing & Workwear
Endurance Cotton Drill Bib & Brace Overalls
• Two side swing, bib, rule, and hip pockets
• Waist: 80-132cm (Except 84 & 120cm)
• Colour: Navy Blue
Code: 321000 Each £22.49
Please Note: All Work Safe Bib & Brace waist sizes rise in 4cm increments.
Endurance Polycotton Warehouse Coat
• Press stud fastening
• Two hip and one pencil-division chest pockets
• Side access slits
• 65% polyester, 35% cotton 260g/m 2
• Size: S, M, L, XL, XXL
• Colour: White
Code: 321341Each £22.99
33

Clothing & Workwear
Ladies Workwear
Regatta Uproar Water Repellent Interactive Softshell
Ladies Jacket
TRA645
• Shaped to ladies cut
• Size: 10, 12, 14, 16, 18
• Colour: Black/Seal Grey
Code: 342588Each £36.99
3
34
Unisex Heavyweight Fleece Jacket
Classic and substantial; 380g/m 2 anti-pill polyester.
• Elasticated cuffs
• Full length coloured zip
• Two zipped waist pockets
• Elasticated pull cords and toggles
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 342482Each £23.49
2
EN 471:
2003 +A1:2007
Keep Safe Ladies EN 471 High Visibility Safety
Jacket
EN 343
PU coated breathable waterproof fabric, with collar-concealed hood.
FABRIC ONLY
• Rear side vents
• Two outer, two internal, and map pockets
• Size: 8, 10, 12, 14, 16
• Colour: Saturn Yellow
Code: 321157Each £61.49

Ladies Workwear
Endurance Ladies Polycotton Polo Shirt
• Contemporary ladies cut
• Knitted collar, open hem sleeve, side vents
• 50% polyester, 50% cotton 220g/m 2
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 362183Each £9.49
Clothing & Workwear
Ladies Action Trousers
Endurance Action Ladies Trousers
• Part elasticated, button fastening waistband
• Knee patches
• Multi-pocketed
• Size: Ladies 10-18
• Action Trouser in Women’s fit
• Length: Regular Leg (29")
• Colour: Black
Code: 320263Pair £22.99
• Colour: Navy Blue
Code: 320245Pair £22.99
Ladies Polycotton Tabard
• Adjustable, stud-fastened side tabs
• Colour-matched bound edges
• Large patch pocket
• 50% polyester, 50% cotton 220g/m 2
• Size: 74cm shoulder to hem;
• S, M, L, XL, XXL
• Colour: Navy Blue
Code: 324709 Each £9.99
• Colour: Royal Blue
Code: 324701 Each £9.99
• Colour: Red
Code: 324707 Each £9.99
35

Hand Protection
Buying Guide
Choose the right hand protection
European Standards
Implies that the gloves comply with the basic requirements laid down by the EEC
directive: Personal Protective Equipment.
Simple Design (Category 1)
For areas of ‘minimal risk’ where the effects of not wearing a glove are easily
reversible or superficial. Such products are self-certified.
Intermediate Design (Category 2)
For areas of specific risk i.e. mechanical risks. Such products will have been EC
type tested against European test methods and certified by a notified body.
Complex Design (Category 3)
For areas/applications that can seriously or irreversibly harm the health. Such
products, in addition to the CE type test, will also have to be either produced
under an approved quality system OR be type tested on an annual basis.
Health & Safety
Hands at work are extremely vulnerable to a wide range of hazards
which include cuts, blows, chemical attack and temperature
extremes. With industry’s increasingly complex and sensitive
manufacturing and handling processes, there is a growing
insistence on the use of “job fitted” gloves that meet each user’s
specific requirements; hence our offering of a wider and more
comprehensive range of gloves in this section – in excess of 200
different types and styles from which to choose.
Maintenance
Contaminated and worn gloves may fail to protect the hands
from the very hazard they were designed for. Effective protection
is maintained by regular replacement of the gloves. Check the
condition of the gloves, inside and out.
EUROPEAN STANDARDS
EN 374-2 Chemical & Micro-organisms
Low Chemical resistant or Waterproof glove pictogram is to be used for those gloves that do not achieve a breakthrough time of at
least 30 minutes against at least three chemicals from the pre-defined list (but which comply with the Penetration test).
EN 374-3 Chemical & Micro-Organisms
This standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
Resistance to penetration by micro-organisms. Referred to as acceptable quality level (AQL).
EN 388 Mechanical Hazards
This standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical problems caused
by abrasion, blade cut, puncture or tearing. This standard also covers risk of electrostatic discharge.
A) Resistance to abrasion – Rating 0-4
B) Blade cut resistance – Rating 0-5
C) Tear resistance – Rating 0-4
D) Puncture resistance – Rating 0-4
EN 407 Thermal Hazards
This standard specifies thermal performance for protective gloves against heat and/or fire.
A) Burning behaviour – Rating 0-4
B) Contact heat – Rating 0-4
C) Convective heat – Rating 0-4
D) Radiant heat – Rating 0-4
E) Small splashes of molten metal – Rating 0-4
F) Large splashes of molten metal – Rating 0-4
EN 659 Thermal Hazards
This standard defines performance requirements for gloves designed to protect fire fighters against heat and flames.
EN 511 Protection from cold
This standard applies to gloves which protect the hands against convective and contact cold.
A) Resistance to convective cold – Rating 0-4
B) Resistance to contact cold – Rating 0-4
C) Permeability to water – Rating 0-1
Food Handling
Gloves suitable for food handling must carry this symbol or be labelled ‘For Food Use’.
CE Mark
CE implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective Equipment.
EN 421 Radioactive Hazards
This standard lays down test methods and performance criteria for gloves offering protection against ionising radiation and radioactive
contamination.
36

37

Hand Protection
Lightweight & PU Coated Gloves
Polyurethane coating is a flexible, synthetic material that helps protect hands from harmful residues and chemicals while providing
excellent grip, tactile sensitivity and abrasion resistance.
Applications include hi-tech, electronic, small parts assembly, automotive sub-assembly, light fabrication, micro-engineering, packaging,
inspection, light industrial, horticulture, and general plant use.
ALL THESE GLOVES CONFORM TO EN 388 INTERMEDIATE DESIGN
Juba ® Eco-Pu Coated Glove
PU1400 - Comfortable and precise handling in dry
conditions.
• Firm fastening, abrasion resistant
• Excellent dexterity and sensitivity
• Size: 8, 9, 10
4131
• Cartons of 10
Code: 304491Pair £1.99
Polyco Martix Grip PU Coated Glove
Seamless knitted liner with polyurethane palm
coating
• Good abrasion and tear resistance
• Open back style allows the hands to breathe,
keep cool and comfortable
• Close fitting design for maximum dexterity
• Size: 6, 7, 8, 9, 10, 11
3131
• Colour: Black
Code: 303183Pair £1.38
• Colour: Grey
Code: 303184Pair £1.47
Showa BO500 Palm Fit
PU Coated Glove
• Ideal for precision work and product protection.
A very supple, stretchable, lightweight and
comfortable mechanical barrier that adapts to every
movement
• Exceptionally thin coating
facilitates movement
• Lightweight seamless liner
prevents irritation
3131
• Size: 7-9
• Colour: Black
Code: 431158Pair £3.75
38
Skytec Ninja Lite
Ultra lightweight (18gg) glove
providing excellent second skin
comfort as well as outstanding
flexibility and a tactile touch. Protects
the hand from oils, grease and
abrasion, with effective grip. Ideal
for intricate tasks and for preventing
product contamination
• Lightweight (18 gauge) and close
fitting for excellent dexterity
• Maximum flexibility and movement
for the most intricate of tasks
• Breathable liner
• Elasticated wrist provides a secure
and comfortable fit
• Lint free, reducing the risk of product
contamination
• Seamless liner
prevents irritation
• Size: 8-10
4131
• Colour: Blue
Code: 303265Pair £3.49
Keep Safe PU Coated
Glove
Ideal for packing, inspection, fine
component assembly, delicate and
precise operations.
• Excellent levels of dexterity
• Seamless liner – no seams against
worker’s hand
• Size: 7, 8, 9, 10
• Colour: White
4121
• Cartons of 12
Code: 303044Pair £1.72
­• Colour: Grey
Code: 303052Pair £1.72
• Size: 8, 9, 10
• Colour: Black
Code: 303055Pair £1.72
Honeywell Perfect Poly
PU Coated Glove
2400251 - Ideal for automotive
assembly and fine component
handling.
• Excellent dexterity, strong abrasion
• Lightweight polyamide knitted glove
15 gauge
• Size: 6, 7, 8, 9, 10
• Colour: Black/Grey
• Cartons of 10
Code: 303064 Pair £2.99
Honeywell Work Easy PU
Coated Glove
2100251 - Tight knit polyester –
perfect support, good touch and grip.
• Excellent abrasion and tear resistance
• Limits dirt penetration
• Ventilated back optimises
breathability
• Size: 8, 9, 10
• Colour: Black
• Cartons of 10
Code: 303057Pair £2.29
4121 3121

Nitrile Coated Gloves
Durable synthetic rubber (Nitrile) provides excellent cut, slash, snag, puncture and abrasion resistance, while offering superior dexterity
and grip; suitable for parts assembly or handling, automotive assembly or repair, and oil refineries.
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Hand Protection
Juba ® Smart Tip Nylon ® with Foam Nitrile Coated
Glove
H4120 - SMART TIP technology allows handling touch screens using the index,
thumb and middle finger while keeping the glove on.
• Light and flexible
• Very ergonomic, seamless glove
• Nitrile technology gives breathability
• Provides good grip in oily conditions
• Good mechanical resistance
• Size: 7, 8, 9, 10
• Colour: Orange/Black
• Cartons of 10
Code: 304422 Pair £3.99
Ansell Hyflex ® Nitrile Coated Glove
11-818 - Patent pending, ultra-thin FORTIX nitrile foam coating lasts up to three
times longer than comparable coatings.
• FORTIX provides enhanced dry grip, fingertip sensitivity
• 20% more breathable than earlier formulations – cooler, drier hands, less sweat
• ‘Barehand feel’ seamless 18-gauge nylon-spandex liner
• Size: 8, 9, 10
• Colour: Blue
Code: 304598Pair £3.99
3121 4121
Keep Safe Nitrile Coated Knitted Glove
For light handling, or where high degree of dexterity required
• Size: 8, 9, 10
• Colour: White/Grey
4121
• Cartons of 12
Code: 303029Pair £2.49
• Colour: Grey
Code: 303012Pair £2.49
• Colour: Black
Code: 304061Pair £2.49
Honeywell Polytril Mix Nitrile Coated Glove
2232233 - Knitted polyamide/cotton – comfort and effective properties against
cuts.
• Outstanding abrasion resistance
• Impermeability to oils
• Rough nitrile coating
• Size: 6, 7, 8, 9, 10
• Colour: Black
4232
• Cartons of 10
Code: 303163Pair £2.69
39

Hand Protection
Nitrile Coated Gloves
Durable synthetic rubber (Nitrile) provides excellent cut, slash, snag, puncture and abrasion resistance, while offering superior
dexterity and grip; suitable for parts assembly or handling, automotive assembly or repair, and oil refineries.
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Juba ® Eco-Nit Nitrile Coated Glove
115/151 - Excellent mechanical protection and dexterity
• High resistance to abrasion
• Comfortable, secure handling
• Size: 8, 9, 10
• Colour: Grey/Black
4121
• Cartons of 10
Code: 304494Pair £2.49
SHOWA 265R Assembly Grip Nitrile Palm Coated Glove
Lightweight and resistant to deformation. Protects from oils, hydrocarbons, grease
and abrasion, with effective grip
• Lightweight and close-fitting for excellent dexterity
• Designed for easy movement and continuous wear
• Seamless liner prevents irritation
• Secure and comfortable fit
• Size: 6-9
4131
• Colour: Grey
Code: 304416Pair £4.00
40
42
SHOWA 370 Palm Fit Assembly Grip Nitrile Coated Glove
Lightweight and resistant to deformation. Protects from oils, grease and abrasion,
with effective grip. Ideal for precision assembly tasks
• Lightweight and close-fitting for excellent dexterity
• Designed for easy movement and continuous wear
• Breathable back of hand to reduce perspiration
• Antibacterial and anti-odour treatment
• Seamless liner prevents irritation
3131
• Size: 5-10
• Colour: White
Code: 304417Pair £3.76
Honeywell Nitrifit Fully Coated Glove
2232236 - Increased water resistance – fully nitrile coated.
• 15 gauge knitted nylon
• Size: 7, 8, 9, 10
• Colour: Black
• Cartons of 10
Code: 303156Pair £3.99
4121

Grip It Oil Gloves
Hand Protection
Polyco Grip It Oil Gauntlet cut 5
Grip It Oil Gauntlet C5 Ref: GIOG5
• Grip: Granulated foam slip-resistant PVC coating
on the hand provides an outstanding grip and is
especially competent in oily conditions
• Cut Resistant: Kevlar ® knitted liner is extremely
comfortable yet provides maximum cut protection
• Chemical Resistant: Offers good resistance to a
variety of chemicals including acids, alkalis, oils and
greases
• Flexible: Waterproof dual PVC coating is highly
flexible, which is maintained even in cold
temperatures
• Heat Resistant: Conforms to European standard
EN407 for Thermal Hazards
• Size: 8-11
• Colour: Green/Black
Code: 303240Pair £16.49
Polyco Grip It Oil Gauntlet cut 1
Grip It Oil Gauntlet C1 Ref: GIOG1
• Handling: A flexible and robust glove that utilises
two layers of nitrile coating to provide ultimate grip,
abrasion protection and durability
• Grip: The palm coating is infused with microfoam
bubbles increasing resistance to oils and maximising
grip in wet and oily handling environments
• Chemical Resistance: Provides good protection
against a wide range of chemicals, including strong
detergents, oils and certain solvents
• Food Contact: Tested in accordance with European
standard EN1186 making it suitable for food contact
• Size: 8-11
• Colour: Blue/Black
Code: 303245Pair £9.49
Polyco Grip It Oil Therm Cut 1
Grip It Oil Thermal C1 Ref: GIOTH
• Protection: Liner is made from a combination of
HPPE (high performance polyethylene) and glass
fibre offering good resistance to mechanical hazards
• Handling: Utilises two layers of nitrile coating to
provide ultimate protection and gripping ability. The
first layer which is a full coating, is soft and resilient
allowing for excellent dexterity. The second layer
which is a palm coating, is infused with microfoam
bubbles increasing resistance to oils and maximising
grip, especially in wet and oily conditions
• Size: 7-11
• Colour: Yellow/Black
Code: 303246Pair £5.49
Polyco Grip It Oil Therm
Grip It Oil Thermal C5 Ref: GIOTHK5
• Protection: Made from a combination
of HPPE (high performance
polyethylene) and glass fibre, the
liner attains maximum EN388 scores
in all categories
• Handling: Comprises two layers of
nitrile coating to provide ultimate
gripping ability and the highest
level of abrasion resistance. The first
layer is a full coating and is liquidresistant.
The second layer coats the
palm of the glove and incorporates
microfoam bubbles, which increase
resistance to oil and maximise grip
in wet and greasy conditions
• Fleecy Liner: Provides exceptional
warmth and comfort
• Size: 7-11
• Colour: Blue/Black
Code: 303241Pair £8.99
Polyco Grip It Oil cut 1
Grip It Oil C1 Ref: GIO
• Protection: Liner is made from
a combination of HPPE (high
performance polyethylene) and glass
fibre offering good resistance to
mechanical hazards
• Handling: Utilises two layers of
nitrile coating to provide ultimate
protection and gripping ability. The
first layer which is a full coating,
is soft and resilient allowing for
excellent dexterity. The second layer
which is a palm coating, is infused
with microfoam bubbles increasing
resistance to oils and maximising
grip, especially in wet and oily
conditions
• Size: 7-11
• Colour: Orange/Black
Code: 303244Pair £4.99
Polyco Grip It Oil cut 3
Grip It Oil C3 Ref GIOK3
• Protection: Liner is made from
a combination of HPPE (high
performance polyethylene) and glass
fibre offering good resistance to
mechanical hazards
• Handling: Utilises two layers of
nitrile coating to provide ultimate
protection and gripping ability. The
first layer which is a full coating,
is soft and resilient allowing for
excellent dexterity. The second layer
which is a palm coating, is infused
with microfoam bubbles increasing
resistance to oils and maximising
grip, especially in wet and oily
conditions
• Size: 7-11
• Colour: Orange/Black
Code: 303243Pair £8.49
Polyco Grip It Oil cut 5
Grip It Oil C5 Ref GIOK
• Protection: Made from a combination
of HPPE (high performance
polyethylene) and glass fibre, the
liner attains maximum EN388 scores
in all categories
• Handling: Utilises two layers of
nitrile coating to provide ultimate
protection and gripping ability. The
first layer, which is a full coating,
is soft and resilient allowing for
excellent dexterity. The second layer,
which is a palm coating, is infused
with microfoam bubbles increasing
resistance to oils and maximising
grip, especially in wet and oily
conditions
• Size: 7-11
• Colour: Yellow/Black
Code: 303242Pair £11.49
41

Hand Protection
Nitrile Coated Gloves
Coated for Wet & Dry Grip
ALL CONFORMS TO EN388 INTERMEDIATE DESIGN
Juba ® Agility Blue Nitrile Foam
Coated Glove
5115 - Nylon ® fully coated with nitrile foam and
elastic open end.
• Excellent mechanical resistance and durability
• Ergonomic style with elastic strip for better
adjustment
• Foam technology offers soft feel
• Ultimate dry and wet grip
• Size: 7, 8, 9, 10
• Colour: Blue
• Cartons of 10
Code: 304423Pair £4.99
Showa 377 Nitrile Foam Coated
Glove
377- Fully nitrile coated nylon liner helps prevent
any liquid penetration
• Exceptional anatomical shape facilitates movement
• Unique foam coating for grip
• Ideal for assembly work
• Size: 6, 7, 8, 9, 10
• Colour: Blue/Black
Code: 304597Pair £5.99
4122 4121
Showa 380 Nitrile Foam Coated
Glove
380- Revolutionary compressed and embossed
Foam Grip – the best compromise between
protection, dexterity, comfort and grip.
• Works in both wet and dry environments
• Extended absorption capacity
• Seamless nylon liner
• For assembly, automotive, inspections, light
fabrication, maintenance, material handling,
mechanical, packaging, tool handling
• Size: 6, 7, 8, 9
3121
• Colour: Blue/Black
Code: 303214Pair £4.99
42
44
Ansell Hyflex ® Breathable Foam Nitrile Glove
11-840 - Extreme durability and superior fit for precision handling
in abrasive applications
• Tough 1.1mm FORTEX ® nitrile foam coating
• FORTEX ® is 20% more breathable than earlier formulations
• Second-skin liner for more comfort
• Cooler, drier hands and less sweat
• Silicone-free material
• Size: 6, 7, 8, 9, 10, 11
4231
• Colour: Black/Grey
Code: 304600 Pair £4.49
Ansell Hyflex ® Nitrile Foam Coated Glove
11-801
• Micro-porous nitrile coating on a seamless liner
• For delicate, precise handling – packaging, automotive, electronics
3131
• Size: 6, 7, 8, 9, 10
• Colour: Grey/Black
Code: 304594Pair £4.49
• Colour: 11-800 White/Grey
Code: 304585Pair £3.99

Nitrile Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Providing excellent grip in oily or greasy applications, air infused nitrile coating absorbs oils better than flat coating, while maintaining
the latter’s cut, tear and abrasion resistance. Ideal for dry or slightly oily applications that require light mechanical protection and high
levels of handling finesse, foam gloves are well-suited to light assembly applications (automotive, plastics, textiles, finished goods) as
well as logistics and warehousing.
Hand Protection
Keep Safe T-Touch Water Based Pu & NBR Foam Glove
Environmentally friendly – manufactured using water instead of harmful solvents
(DMF)
• High flexibility and dexterity
• Excellent wet and dry grip
• Nylon/spandex lining – outstanding comfort, breathability
• Excellent performance in oily and greasy applications
• Size: 8, 9, 10
• Colour: Red/Black
4131
• Cartons of 12
Code: 304021Pair £3.49
Polyco Matrix F Nitrile Palm Coated Grip Glove
103- Matrix F grip - excellent wet & dry grip
• Seamless breathable liner for comfort
• Designed to be close fitting for maximum dexterity
• Foamed nitrile coating channels liquids away from glove surface,
ensuring excellent grip in
wet conditions
• Size: 6, 7, 8, 9, 10, 11
4121
• Colour: Grey/White
Code: 303184Pair £1.87
Juba ® Agility Nitrile Foam Coated
Glove
5112 - Nitrile dots finish to improve grip
• Foamed nitrile channels oils and liquids away from
surface
• Superb wet grip
• Outstanding abrasion resistance
• Longevity, durability
• Size: 8, 9, 10
• Colour: Black/Red Dots
4121
Code: 303082 Pair £2.99
Juba ® Econit Nitrile Foam Coated
Glove
111801 - Excellent grip in dry, wet and oily
conditions
• Nitrile foam channels oils and liquids away from
surface
• 15 gauge Nylon & Lycra liner for maximum
ergonomy
• Excellent resistance to abrasion
• Size: 7, 8, 9, 10, 11
4132
• Colour: Red/Black
Code: 303188Pair £2.69
Keep Safe Nitrile Foam Coated
Glove
Excellent grip in wet, oily or dry conditions
• Seamless nylon liner, exceptional dexterity
and sensitivity
• Size: 6, 7, 8, 9, 10
• Colour: Grey/Brown
4121
Code: 303008Pair £2.49
43

Hand Protection
Nitrile Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Ansell Hyflex ® Rough Nitrile Fully Coated Glove
11-919 - Micro finishing nitrile coating on seamless nylon
• Oëko-Tex ® standard 100 is an internationally recognised standard legislating
upon harmful substances
• Rough nitrile coating provides excellent grip
in dry or oily conditions
• Approved for food preperation
• Size: 7, 8, 9, 10
• Colour: Blue
Code: 304151 Pair £5.49
Keep Safe Nitrile Fully Coated Knitwrist Glove
Cotton jersey liner, knitwrist
• Ideal for construction, street cleaning/refuse collection
and fishing industry
• Size: 7, 8, 9, 10
• Colour: Blue
Code: 303033Pair £2.29
4121 4111
44
46
Keep Safe Lightweight Nitrile Fully Coated Glove
Lightweight nitrile
• Interlock cotton liner, knitwrist
• Ideal for manufacturing and cleaning
industries
• Size: 8, 9, 10
• Colour: Yellow
Code: 303039Pair £2.99
Ansell Hynit ® Nitrile Fully Coated Glove
32-105 - Liquid repellent
• Excellent protection against abrasions and low cuts
• Remarkable flexibility
• Interlock knit liner
• Length: (7, 7½) 215mm,
(8, 9, 10) 235mm
• Size: 7, 7½, 8, 9, 10
Code: 304640 Pair £2.99
3111 3111

Nitrile Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Hand Protection
Ansell Hycron ® Nitrile Coated Glove
27-600 - Special high-performance coating
• Thick double jersey liner
• Extra tough for handling rough, abrasive materials
• Excellent resistance to cuts, snags, punctures, grease and oil
• Not liquid proof or chemical resistant
• U.S.D.A. accepted
• Palm coated knitwrist
• Size: 8, 9, 10
Code: 304606 Pair £3.49
Ansell Easy Flex ® Nitrile Coated Glove
47-200 - Can be repeatedly laundered to increase service life
• Lightweight, flexible
• Superior dry grip
• Better resistance to snags, punctures, abrasions and cuts
• Knitwrist
• Length: 270mm
• Size: 7, 8, 9, 10
• Colour: Green
Code: 304683 Pair £2.99
4221 2111
Keep Safe Lightweight Nitrile Coated Glove
Open back lightweight nitrile
• Interlock cotton liner and knitwrist
• Ideal for industrial tasks, general handling
• Size: 8, 9, 10
3111
• Colour: Yellow
Code: 303038 Pair £2.99
Keep Safe Nitrile Fully Coated Safety Cuff Glove
Safety cuff – extra protection to wrist and forearm
• Cotton jersey liner
• Ideal for construction and handling sheet metals
• Size: 9, 10
4111
• Colour: Blue
Code: 303035Pair £3.99
45

Hand Protection
Latex Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
SHOWA 310 Grip Glove Green
Flexible and robust offering excellent dexterity with good resistance to tearing.
For heavy duty manual handling
• Rough latex surface provides a tactile feel and excellent grip
• Exceptional durability compared to generic imitations
• Breathable back of hand to reduce perspiration
• Seamless liner prevents irritation
• Size: 7-10
4142
• Colour: Green
Code: 431145Pair £3.55
Skytec Ninja Flex
The seamless lightweight (15gg) liner and latex coating maintain an overall
superthin feel for enhanced dexterity, fit and comfort. For manual handling in
damp and dry conditions
• Good resistance to abrasion and tearing
• Excellent grip in both damp and dry environments
• Anatomically designed for high levels of comfort and tactile touch
• Elasticated wrist provides a secure fit
• Silicone and lint free
• Seamless liner prevents irritation
• Size: 7-10
3131
• Colour: Red
Code: 304771Pair £3.14
Keep Safe Fully Latex Coated Glove
Crinkle coating provides a great grip
• Brushed cotton knitted liner – exceptional comfort
• Ideal for handling robust objects such as timbers, ceramics
and building materials
• Length: 250-260mm
• Size: 8, 9, 10
• Colour: Blue
3131
• Cartons of 12
Code: 300786Pair £3.99
Keep Safe Thermal Latex Coated Glove
Seamless knitted cotton/acrylic liner for warmth
• Excellent value for thermal glove
• Secure grip in cold and dry conditions
• Size: 8, 9, 10
• Colour: Grey
2142
• Cartons of 12
Code: 303004Pair £3.88
46
Keep Safe Hi-Vis Latex Coated Glove
Seamless high visibility cotton/acrylic base for warmth
• Latex coating gives maximum grip in wet and dry conditions
• Excellent for low light work environment
• Size: 8, 9, 10
• Colour: Saturn Yellow/Black
2142
• Cartons of 12
Code: 303001Pair £3.29

Latex Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
SHOWA 330 ReGrip
Reinforced grip glove. Double latex coating in the area of the glove subject to
most stress; between thumb and index finger
• Extremely durable
• Rough latex surface provides a tactile feel and excellent grip
• Maximum resistance to rips
• Seamless liner prevents irritation
• Anatomically engineered
• Size: 7-10
2142
• Colour: Grey/Black Palm
Code: 303010Pair £4.99
Hand Protection
Juba ® Grip Latex Coated Glove
251 - Seamless design ensures good ergonomic
• Great dry and wet grip
• Strong, durable and hard wearing
• Cotton/polyester knitted liner
• Size: 8, 9, 10
• Colour: Yellow/Orange
3142
• Cartons of 10
Code: 304152Pair £2.99
• Colour: Yellow/Green
Code: 304709Pair £2.99
Keep Safe Latex Coated Grip Glove
Cotton liner
• Excellent value where secure grip is required
• Crinkle latex coating in green or orange
• Seamless liner provides comfort and dexterity
• Size: 8, 9, 10, 11
• Colour: Orange
2242
• Cartons of 12
Code: 303028Pair £2.49
• Colour: Green
Code: 303026 Pair £2.49
SHOWA 310 Orange
The original ‘orange grip glove’. Flexible and robust offering excellent dexterity
with good resistance to tearing. For heavy duty manual handling
• Rough latex surface provides a tactile feel and excellent grip
• Exceptional durability compared to generic imitations
• Breathable back of hand to reduce perspiration
• Seamless liner prevents irritation
• Size: 8-10
2142
• Colour: Orange
Code: 304711Pair £3.07
Keep Safe Fully Coated Latex Knitwrist Glove
Ideal for a wide range of industrial tasks from assembly and engineering to refuse
collection
• Suitable for wet and dry conditions
• Knitted base
• Size: Men’s
• Colour: Yellow
1110
• Cartons of 12
Code: 304077Pair £2.49
47

Hand Protection
General Handling Gloves
Gloves on this page are CE marked to Simple Design (Category 1).
Keep Safe Pick And Go Glove
CONFORMS TO EN 388 INTERMEDIATE DESIGN
PVC dots on palm, fingers
• Polyester
• Ideal for sorting and parts handling
• Size: S, M, L, XL
2031
• Colour: White with blue dots
• Cartons of 12
Code: 304864 Pair £2.49
Bleached Stockinette Glove
Bleached cotton, fourchette pattern
• Reversible
• Size: Men’s
• Cartons of 12
Code: 304155 Pair £1.49
• Size: Ladies’
Code: 304156 Pair £1.49
Blended Yarn Knitted Glove
Seamless cotton/nylon polyester mix
• Elasticated wrist
• Ambidextrous
• Machine washable
• Colour: White
• Cartons of 12
Code: 015036 Pair £1.49
Cotton Stockinette Glove
Standard quality knit wrist
• Size: Men’s
• Cartons of 600
Code: 304111 Pair £0.99
48
Criss Cross Glove
CONFORMS TO EN 388 INTERMEDIATE DESIGN
• High grip PVC lattice finish
• High levels of dexterity and grip
• Knitted base
• Size: 10
• Colour: Mustard
114X
• Cartons of 12
Code: 304076 Pair £1.49

Rigger Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Hand Protection
Keep Safe Canadian Rigger Style
Yellow Hide Palm Glove
Full grain cowhide
• Safety cuff with vein protection patch
• Palm lined
• Elasticated back
• Size: 10
• Cartons of 12
Code: 304014Pair £11.49
Keep Safe Gold Canadian Rigger
Style Chrome Leather Glove
High quality, shoulder chrome leather
• Elasticated back
• Palm lined
• Size: 10
• Cartons of 12
Code: 304072Pair £6.49
3142 3243
Keep Safe Cowhide Three Piece
Rigger Glove
High quality cowhide palm
• Rubberised cuff, vein patch protection
• Palm lined
• Cotton back
• Size: 10
• Colour: Black/Yellow
4143
• Cartons of 12
Code: 013428Pair £4.99
Keep Safe Chrome Leather Red Cotton Back Rigger Glove
Premier quality chrome split leather
• Knuckle and fingertip protection
• Rubberised safety cuff
• Palm lined
• Cotton back
• Size: 10
• Colour: Red
4143
• Cartons of 72
Code: 304057Pair £2.99
Canadian Rigger Style Split Leather Glove
Chrome leather
• Safety cuff, vein protection patch
• Elasticated back
• Palm lined
• Size: Men’s
• Cartons of 120
Code: 304012Pair £1.99
49

Hand Protection
Work Gloves
Leather Lined Driving Glove
Yellow cowhide
• Elasticated back
• Fully fleece lined
• Superior quality
• Cartons of 12
3112
Code: 304033 (Lined) Pair £17.99
Code: 304032 (Unlined) Pair £15.99
Polyco Matrix Mechanic Three Finger
Lyrca Glove
Mechanics style glove made with a blend of
synthetic leathers
• Reinforced palm grip patches and Neoprene ® on
the knuckles for extra protection
• Spandex on the back of the hand offers excellent
in-use comfort
• Size: 7, 8, 9, 10, 11
Code: 304785Pair £12.99
Cotton Back-Leather Palm Glove
Chrome leather palm
• Cotton back
• Knitted wrist
• Size: Men’s
• Cartons of 300
Code: 304010Pair £1.99
uvex phynomic foam
• Second skin fit gives a natural touch
• Flexible construction gives high levels of dexterity and reduces fatigue
• Water repellent – outstanding grip in dry applications
• Dermatologically tested and approved - ideal for allergy sensitive wearers
• Soft breathable liner
• Certificated for the food industry
• Leaves no trace marks on products
• Certified to Oeko-Tex Standard 100 - no harmful substances used in the
manufacturing of this glove
• Size: 7 - 10
• Colour: Grey
Code: 431420Pair £3.50
uvex phynomic wet
• The phynomic wet coating allows liquids to run off while light oil is absorbed for
high levels of grip in moderate wet and light oil applications
• Exceptional abrasion resistance for high levels of protection and durability for
more demanding environments
• Soft breathable liner with second skin fit
• Flexible construction gives high levels of dexterity and reduces fatigue
• Dermatologically tested and approved - ideal for allergy sensitive wearers
• Certified to Oeko-Tex Standard 100 - no harmful substances used in the
manufacturing of this glove
• Size: 7 - 10
• Colour: Blue
Code: 304044Pair £3.77
50
Specialist Chemical Gloves
ALL CONFORM TO EN 388 & EN 374 COMPLEX DESIGN
Keep Safe PVC
Lightweight Glove
Flexible, good sensitivity, and
comfortable in use
• Good dry grip
• Fully coated knitwrist
• Smooth finish
• For general handling
• Size: 8, 9, 10
4121
• Colour: Red
• Cartons of 120
Code: 304930Pair £1.99
Keep Safe PVC Gauntlet
• Size: 9, 10
• Colour: Red
• Length: 270mm
4121
• Cartons of 12
Code: 303022Pair £2.49
• Size: 9, 10
• Length: 350mm
• Cartons of 12
Code: 303023Pair £2.99
• Size: 10
• Length: 400mm
• Cartons of 60
Code: 303024Pair £3.49
• Size: 10
• Length: 450mm
• Cartons of 12
Code: 303025Pair £3.99

Cut Resistant Colour Coded Gloves
ALL CONFORM TO EN388 INTERMEDIATE DESIGN (CUT LEVEL 1 or 3 or 5)
We help you to improve hand safety, reduce injuries and maintain compliance with safety regulations across your businesses.
Colour coding of gloves is a useful way to instantly monitor if the correct protection level is being worn.
Cut 1 Red – general handling with low cut protection
Cut 3 Orange – general handling with medium cut resistance
Cut 5 Green – general handling with high cut resistance
Hand Protection
Cut Level 1 Glove
• Red low cut resistance
• Exceptional quality and value, lightweight lower
cut protection handling glove
• Offers excellent dexterity levels, comfort and fit
• Available in a variety of coatings
• Gloves should be used in work areas of minimal
cut hazards
Applications:
General assembly
Component handling
Light engineering work
Mechanical work
Inspection
Cut Level 3 Glove
• Orange medium cut resistance
• A range of cost effective, durable gloves suitable for
processes where there is a cutting or laceration risk
to workers’ hands
• Excellent comfort and close fitting gloves offering
high protecion levels
• Available in a variety of coatings
• Gloves should be used in work areas where a
medium cut hazard is present
Applications:
Component handling
Tiling
Steel handling
Construction
Automotive manufacturing
Cut Level 5 Glove
• Green high cut resistance
• Designed to be close fitting for maximum dexterity.
Flexible and comfortable gloves with the highest
level of anti-cut protection for higher cut risk
industries
• Available in a variety of coatings.
• Gloves should be used in work areas where a high
risk level of cut risk is present
Applications:
Construction
Glass handling
Engineering work
Metal fabrication
Sheet steel manufacturing
Keep Safe Smooth Nitrile Foam
Coated Cut Level 1 Red Glove
Ideal for wet, dry and oily conditions.
• Lightweight seamless knitted red nylon liner
• High abrasion resistance
• Nitrile coating is robust and yet tactile
• Knitted wrist for secure fit
• Size: 8, 9, 10, 11
• Colour: Red/Black
4131
• Cartons of 10
Code: 304121Pair £2.99
Keep Safe PU Coated Cut Level 1
Red Glove
Ideal for intricate handling.
• Lightweight application in dry environments
• Offers outstanding comfort, fit and sensitivity
• High abrasion resistance
• Seamless knitted red nylon liner
• Size: 8, 9, 10, 11
• Colour: Red/Black
4121
• Cartons of 10
Code: 303618Pair £2.49
Keep Safe PU Coated 3 Digit Cut
Level 1 Red Glove
Ideal for dexterous and intricate applications.
• Lightweight three digit design
• Thumb and two fingers removed to aid small part
handling
• High abrasion resistance
• Seamless knitted red nylon liner
• Size: 8, 9, 10, 11
• Colour: Red/Black
4131
• Cartons of 10
Code: 304122Pair £3.49
51

Hand Protection
Cut Resistant Colour Coded Gloves
ALL CONFORM TO EN388 INTERMEDIATE DESIGN (CUT LEVEL 1 or 3 or 5)
We help you to improve hand safety, reduce injuries and maintain compliance with safety regulations across your businesses.
Keep Safe PU Coated 3 Digit
Cut Level 3 Orange Glove
Ideal for use within construction, automotive,
assembly, utility and engineering industries.
• Tight fitting with 3 open fingers for maximum dexterity
• Flexible palm polyurethane coating
• Superb abrasion resistance
• Seamless knitted orange liner
• Size: 8, 9, 10, 11
• Colour: Orange/Black
• Cartons of 10
Code: 304214Pair £10.49
Keep Safe Nitrile Foam Coated Cut
Level 3 Orange Glove
Ideal for work in damp or greasy environments.
• Nitrile foam coating ensures excellent grip and
performance
• Dexterous and flexible for secure handling
• Open back ensure breathability for added comfort
• Seamless knitted orange liner
• Size: 8, 9, 10, 11
• Colour: Orange/Black
• Cartons of 10
Code: 304123Pair £9.99
Keep Safe PU Coated Cut Level 3
Orange Glove
Ideal for heavier duty handling in light engineering
and assembly applications.
• Polyurethane coating to palm and fingers
offers good grip
• High abrasion resistance
• Seamless knitted orange liner
• Elasticated knit wrist for a snug fit
• Size: 8, 9, 10, 11
• Colour: Orange/Black
• Cartons of 10
Code: 303619Pair £9.49
4342 4343 4342
52
Keep Safe Nitrile Foam Coated
Cut Level 5 Green Glove
Ideal for handling sharp oily components.
• Excellent surface grip in all environments
• Protects against cuts and abrasions
• Foam nitrile coating absorbs oil and ensures secure
grip
• Seamless knitted green liner for added comfort
and dexterity
• Size: 8, 9, 10, 11
• Colour: Green/Black
• Cartons of 10
Code: 304126Pair £11.99
Keep Safe Smooth Nitrile Coated Cut
Level 5 Green Glove
Ideal for applications where grip, cut protection or oil
handling is important.
• Nitrile coating is robust yet tactile
• Palm and fingers to knuckles coated for additional
protection in wet and dry conditions
• Protects against cuts, abrasives and sharp edges
• Elasticated knit wrist for snug fit
• Size: 8, 9, 10, 11
• Colour: Green/Black
• Cartons of 10
Code: 304125Pair £12.49
Keep Safe PU Coated Cut Level 5
Green Glove
Ideal for applications where fine handling and robust
performance are a requisite.
• Lightweight polyurethane coating enhances grip
and abrasion protection
• Knitted wrist for secure fit
• Open back design for extra comfort and
breathability
• Size: 8, 9, 10, 11
• Colour: Green/Black
• Cartons of 10
Code: 303620Pair £11.49
4544 4544 4543

Cut Resistant Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Hand Protection
uvex C500 foam
• Cut level 5 glove with SoftGrip foam coating
• Suitable for dry areas and light oil working conditions
• uvex Bamboo TwinFlex ® Technology – a combination of Bamboo-ryon;
Dyneema, glass fibre; polyamide spun together to deliver:
• optimum dexterity
• cut level 5 protection (level 5/5)
• high abrasion and tear resistance
• a soft, comfortable feel with temperature regulation, and
• uvex climazone ® helps reduce perspiration
• Certified to Okeo-Tex ® 100 standard - no harmful chemicals are used in this
product
• Size: 7 - 11
• Colour: Lime
Code: 304041Pair £13.06
uvex unidur 6659
• Seamless flexible HPPE and glass fibre liner with cut level 5 protection (level
5/5)
• Durable PU coating for sensitivity, grip and excellent dexterity
• Palm coated with open back design. Excellent breathability and airflow. Keeps
hands cool during long periods of use
• Abrasion level 4. Highest level of durability for longer lasting glove suitable for
challenging environments
• Ideal for multi-task handling for use in dry applications
• Part of the uvex classic range of products. Economical pricing - deliverable cost
savings
• Size: 7 - 10
• Colour: Grey
Code: 304034Pair £7.65
Keep Safe Cut Resistant Level 5 Pu Coated Glove
Seamless glass fibre/spandex/synthetic mix yarn with PU coating on palm and
fingers.
• Soft finish – exceptional cool comfort
• Ideal for glass handling, construction, automotive fabrication
and sheet metal work
• Size: 8, 9, 10
• Colour: Grey/Black
• Cartons of 12
Code: 304271Pair £9.49
Keep Safe Cut Resistant Level 5 Nitrile Coated Glove
Seamless glass fibre/spandex/synthetic mix yarn with nitrile coating on palm and
fingers.
• Increased resistance to oils and greases
• Soft finish – exceptional cool comfort
• Ideal for glass handling, sheet metal work, engineering maintenance,
refuse collection, janitorial applications, agriculture and horticulture
• Size: 8, 9, 10
• Colour: Grey/Black
• Cartons of 12
Code: 304272Pair £8.99
4542 4542
Keep Safe Cut Resistant Level 3 Pu Coated Glove
Cut resistant knitted liner with polyurethane coating on palm and fingers.
• Suitable for dry working conditions
• Size: 8, 9, 10
• Colour: Grey
• Cartons of 12
Code: 304024Pair £9.49
4342
53

Hand Protection
Cut Resistant Gloves – Kevlar
Keep Safe Kevlar ® Cut Resistant Level 5 Latex Coated
Glove
Cut resistant knitted liner with latex coating on palm and fingers.
• Size: 9, 10
• Colour: Blue
• Cartons of 12
Code: 304023Pair £11.49
Keep Safe Kevlar ® Cut Resistant Level 3 Latex Grip Glove
Ideal for handling sharp or abrasive objects
• Seamless 100% knitted Kevlar ® liner
• Latex coating on palm and fingers
• Size: 8, 9, 10
• Colour: Yellow/Blue
• Cartons of 10
Code: 303027Pair £10.49
4543 2343
54
Keep Safe Light Kevlar ® Cut Resistant Level 2 Glove
For fine handling of sharp objects
• Use as an under glove to provide
cut resistance
• 100% Kevlar ® XIXXXX
gauge 13
• Size: 9, 10
• Colour: Yellow
124X
• Cartons of 12
Code: 303125Pair £4.99
Keep Safe Kevlar ® Cut Resistant Level 3 Sleeve
2-ply Kevlar ® sleeve with thumb hole
XIXXXX
• Non-slip top (not constricting) fits all sizes
• Size: 355mm (14”)
• Colour: Yellow
134X
• Cartons of 12
Code: 303134 Each £5.99
• Size: 558mm (22")
Code: 303136Each £9.49

Food Processing Disposable Gloves
Hand Protection
Keep Safe Disposable Nitrile
Powder-Free Gloves
Oil and chemical resistant, and suitable for use within
the food industry.
• Latex and powder free
• Rolled cuff for additional strength
• Size: S, M, L, XL
• Colour: Blue
• Cartons of 10
Code: 304641 Box of 100 £11.49
Keep Clean Latex Powder Free
Disposable Gloves
Approved for use in food preparation.
• 100% natural latex
• Dispenser box
• Ambidextrous
• Size: S, M, L, XL
• Colour: Natural
• Cartons of 10
Code: 304671 Box of 100 £8.99
Keep Clean Latex Powdered
Disposable Gloves
Approved for use in food preparation.
• 100% natural latex
• Dispenser box
• Ambidextrous
• Size: S, M, L, XL
• Cartons of 10
• Colour: Natural
Code: 015031 Box of 100 £8.49
• Size: M, L
• Colour: Blue
Code: 015030 Box of 100 £8.49
Vinyl Disposable Gloves
Keep Clean Vinyl Powder-Free Disposable Gloves
Smooth exterior, beaded cuff
• Powder free
• Approved for food use
• Dispenser box
• Size: S, M, L, XL
• Cartons of 10
• Colour: Clear
Code: 304661 Box of 100 £8.49
• Colour: Blue
Code: 304663 Box of 100 £8.49
Keep Clean Vinyl Powdered Disposable Gloves
Smooth exterior, beaded cuff
• Lightly powdered
• Approved for food use
• Dispenser box
• Size: S, M, L, XL
• Cartons of 10
• Colour: Clear
Code: 304997 Box of 100 £5.49
• Colour: Blue
Code: 304994 Box of 100 £5.49
• Colour: Red
Code: 304576 Box of 100 £7.49
• Colour: Green
Code: 304577 Box of 100 £7.49
55

Hand Protection
Food & General Handling Gloves
Glove detail
Juba ® By Grippaz Ambidextrous Extra Strong Nitrile
Glove
Patented double sided grip on palm and back and also inside for extra traction.
• Unique fish scale design grip
• 100% nitrile. No latex. No protein allergy issues
• Chemical resistant
• Stretch formula fits more snugly than household gloves
• Beaded cuff will not flop down.
• Fits under oversleeves
• Ambidextrous – can be worn on either hand
• Size: 9, 10, 11
• Colour: Blue
1000
• Cartons of 10
Code: 304674 Pack of 24 pairs £14.99
Ansell VersaTouch ® Flocklined
Latex Gloves Category III Intermediate Design
87-195 - Specially treated natural rubber to reduce the risk of allergic reactions.
• Cotton flock lining
• Fishscale grip design
• Liquid and mechanical resistant
• Ideal for fish, poulty and meat, vegetable and fruit processing
• Suitable for cleaning
• AQL 1.5
• Length: 305mm
• Thickness: 0.35mm
• Size: 7, 8, 9, 10
X010
• Colour: Blue
Code: 304208 Pack of 12 pairs £12.99
56
Keep Clean Rubber Household
Gloves
Slip resistant pattern grip on palm.
• Soft flock lining absorbs perspiration and keeps
hands dry
• Beaded cuffs for easy donning
• Length 300mm
• Thickness on palm 0.40mm
• Size: S, M, L, XL
• Colour: Blue
• Cartons of 12
Code: 300796Pair £0.84
• Colour: Yellow
Code: 300797Pair £0.84
• Colour: Green
Code: 300798Pair £0.84
• Colour: Pink
Code: 300799Pair £0.84
Ansell Astroflex Latex Gauntlet
Ideal for wet and dry conditions.
• Coating on polyamide seamless liner
• Fully double coated
• Wrinkle finish
• Natural rubber latex
• Length: 300mm
• Thickness: 1.25mm
• Size: 7, 8, 9, 10, 11
• Colour: Blue
• Cartons of 120
2241
Code: 304224Pair £5.49
Juba ® Blue Grab Latex Coated Glove
5830 - Durable – excellent resistance to abrasion
and tear
• 100% waterproof
• Thermal insulating (heat/cold)
• 100% waterproof
• Cotton support for extra comfort
• Size: 8, 9, 10, 11
• Colour: Blue
4141
• Cartons of 12
Code: 300505 Pair £5.49

Disposable Gloves
ALL CONFORM TO EN 455 PARTS 1, 2 AND 3
Suitable for people with latex allergies and provides resistance to oils and diluted chemicals.
Hand Protection
Ansell TouchNTuff ® Nitrile Powder
Free Disposable Gloves
92-665 Innovative Nitrile compound –
outstanding chemical and mechanical properties,
comfort and dexterity.
• Three times puncture resistance of latex or PVC
disposable
• Fits like second skin
• Safer on sensitive skin
• AQL 1.5
• Contains no natural rubber
• Length: 300mm
• Thickness: 0.10mm
• Size: 6-6½, 7-7½, 8-8½, 9-9½
• Colour: Blue
• Cartons of 10
Code: 304672 Box of 100 £18.99
Ansell TouchNTuff ® Nitrile Powder
Free Disposable Gloves
92-600 Innovative Nitrile compound – outstanding
chemical and mechanical properties, comfort and
dexterity.
• Three times puncture resistance of latex or PVC
disposable
• Fits like second skin
• Safer on sensitive skin
• AQL 1.5
• Contains no natural rubber
• Length: 240mm
• Thickness: 0.12mm
• Size: 6½-7, 7½-8, 8½-9, 9½-10
• Colour: Green
• Cartons of 10
Code: 304575 Box of 100 £18.99
Ansell TouchNTuff ® Nitrile Powdered
Disposable Gloves
92-500 100% nitrile – absolutely no fillers, silicones,
or plasticisers.
• AQL 1.5
• Length: 240mm
• Thickness: 0.12mm
• Size: 6½-7, 7½-8, 8½-9, 9½-10
• Colour: Green
• Cartons of 10
Code: 304664 Box of 100 £14.99
Keep Safe Latex Powder Free Disposable Gloves
Low protein levels and toxins, ideal for those with sensitive skin.
• Rolled cuff
• Powder free – reduces risk of contamination
• Ambidextrous
• Size: S, M, L
• Colour: Natural
• Cartons of 10
Code: 304857 Box of 100 £16.99
Keep Safe Vinyl Powder Free Disposable Gloves
• Extremely comfortable, very versatile
• Ambidextrous
• Latex free
• Thin with excellent fit
• Powder free, reducing the risk of product contamination
• Size: S, M, L
• Colour: Clear
• Cartons of 10
Code: 304713 Box of 100 £14.99
57

Hand Protection
Disposable Gloves
ALL CONFORM TO EN 455 PARTS 1, 2 AND 3
Suitable for people with latex allergies and provides resistance to oils and diluted chemicals.
Ansell TouchNTuff ® Nitrile Powder Free Disposable
Gloves
92-670 Innovative Nitrile compound – outstanding chemical and mechanical
properties, comfort
and dexterity.
• Three times puncture resistance of latex or PVC disposable
• Fits like second skin
• Safer on sensitive skin
• AQL 1.5
• Contains no natural rubber
• Length: 240mm
• Thickness: 0.10mm
• Size: 6½-7, 7½-8, 8½-9, 9½-10
• Colour: Light Blue
• Cartons of 10
Code: 304670 Box of 100 £12.99
Polyco Bodyguards Black Nitrile Powder Free
Disposable Gloves
GL8971/72/73/75 Soft elastic material – cooler, more comfortable and flexible.
• Better puncture and abrasion resistance than
• Natural rubber or vinyl
• No latex proteins – eliminates protein sensitisation
• Powder free
• AQL 1.5
• Size: S, M, L, XL
• Colour: Black
• Cartons of 10
Code: 304989 Box of 100 £11.99
58
Polyco Finite ® Green Powder Free
Nitrile Disposable Gloves
FNG100 Powder free nitrile disposable glove which compliant to European
Standard EN374, providing an effective barrier against oils, acids and other
chemicals.
• Better puncture and abrasion resistance
• Soft elastic material feels cooler and more comfortable to wear
• Rolled cuff
• AQL 1.5
• EN 1186 – suitable for food contact
• Length: 250mm
• Size: 6½, 7½, 8½, 9½, 10½
• Colour: Green
• Cartons of 10
Code: 304469 Box of 100 £9.99
Polyco Finity ® Synthetic Powder Free Disposable Gloves
FT100 Thin synthetic, with an excellent fit that feels like a second skin.
• Latex free – for those who are sensitised to latex
• Although disposable, strong enough to be re-used
• Ambidextrous
• Soft formulation – flexible, dextrous, greater comfort
• Rolled cuff – additional strength, prevention of liquid roll back
• AQL 1.5
• Length: 240mm
• Size: S, M, L, XL
• Colour: Natural
• Cartons of 10
Code: 304825 Box of 100 £6.99

Nitrile Disposable Gloves
A synthetic rubber glove that resists snags whilst also providing flexibility and dexterity that is also suitable for people with latex
allergies. It provides good resistance to petroleum, acids and aromatic and chlorinated solvents.
Hand Protection
KimTech Science ® Powder Free
Nitrile Disposable Gloves Category
III
Ambidextrous gloves with beaded cuff and
textured fingertips for improved grip.
• Designed for laboratories to provide all-round
protection
• Ideal for use in higher-risk applications within
biomedical research, forensic science and
non-sterile drug manufacturing
• Silicone free formulation
• AQL 0.65
• Size: S, M, L, XL †
• Colour: Purple
• Cartons of 1 0
Code: 014602 Box of 100 £19.99
Skytec Utah
• High performance, powder-free, nitrile single use
disposable glove with a textured finish. Significantly
stronger alternative to latex
• Comfortable with a ‘second skin’ feel
• Resistant to oils, acids and many chemicals
• Category III, EN374 approved
• AQL 1.5
• Powder-free, latex-free, non-sterile
• Textured finish for grip and touch
• Complies with FDA food handling requirements
(21CFR 177.2600)
• Blue colouring
• Thickness: 0.11mm
• Size: S - XL
• Colour: Blue
Code: 303225 Box of 100 £12.70
Polyco Finite Powder Free Nitrile
Disposable Gloves
FN100 - Better puncture and abrasion resistance
than natural rubber or vinyl. Excellent grip in both
wet and dry conditions.
• Rolled beaded cuffs
• USDA accepted
• Suitable for food handling
• Powder free
• AQL 1.5
• Size: 6½, 7½, 8½, 9½
• Colour: Blue
• Cartons of 1 0
Code: 304808 Box of 100 £11.49
† = Box Of 40
Keep Clean Nitrile Powder Free
Disposable Gloves
• Approved for use with food preparation
• 100% nitrile
• AQL 4.0
• Size: S, M, L, XL
• Colour: Blue
• Cartons of 1 0
Code: 304667 Box of 100 £10.49
Keep Clean Nitrile Powdered
Disposable Gloves
• Approved for use with food preparation
• 100% nitrile
• AQL 4.0
• Size: M, L, XL
• Colour: Blue
• Cartons of 10
Code: 304648 Box of 100 £9.99
Keep Clean V-Nitrile Powder Free
Disposable Gloves
• Smooth palm surface with beaded cuff
• Non-sterile
• Not suitable for handling fatty foods
• Powder free
• AQL 4.0
• Size: M, L, XL
• Colour: Blue
• Cartons of 10
Code: 304996 Box of 100 £9.49
59

Hand Protection
Chemical Resistant Gloves
ALL CONFORM TO EN 388 AND EN 374 COMPLEX DESIGN
Ansell AlphaTec Nitrile Coated Gauntlet
58-530 - A unique combination of grip and chemical resistance and the first glove
to utilise the revolutionary Ansell Grip Technology.
• Allows controlled handling
• Ergonomic hand shape reduces hand fatigue
• Suitable when handling wet, slippery objects
• AQL: 0.65
• Length: 305mm
• Size: 8, 9, 10
• Colour: Burgundy/Black
4121
• Packed in cartons of 72
Code: 304660 Pair £7.99
Ansell Premium Sol-vex ® Gauntlet
37-900 Premium quality nitrile gauntlet for high risk chemical handling.
• Superior chemical resistance and reliability
• 100% pressure tested for confidence in high risk areas
• Flock lined
• Chlorinated to improve wet grip
• Sanitised-bactericide treatment
• AQL 0.65
• Length: 380mm
• Size: 7, 8, 9, 10, 11
• Colour: Red
4102
• Packed in cartons of 72
Code: 304615Pair £4.99
60
Ansell Classic Sol-vex ® Gauntlet
37-675 Designed to deliver optimal performance in wet and dry environments
where chemical
resistance is crucial.
• Flock lined nitrile gaunlet
• Embossed sand patch finish to enhance grip
• Sanitised - bactericide treatment
• Chemical processing
• Also suitable for food handling tasks
• AQL: 0.65
• Length: 330mm
• Thickness: 0.38mm
• Size: 7, 8, 9, 10, 11
• Colour: Green
Code: 304605 Pair £2.99
Ansell Virtex Nitrile Gauntlet
79-700 First glove to incorporate Ansell AquaDri ® technology
for drier hands.
• Thinner, softer nitrile for more comfort and flexibility
• Good chemical and mechanical performance
• Flexibility of a lightweight re-usable product
• Enhanced grip
• FDA approved
• AQL: 0.65
• Length: 310mm
• Size: 7, 8, 9, 10, 11
• Colour: Blue
Code: 304616Pair £1.99
4101 1001

Chemical Resistant Gloves
Nitrile and rubber protective gloves offering certified quality at very competitive prices.
Hand Protection
Ansell Industrial Heavyweight G17k Gloves Category
III
Tough, heavyweight comfort and sensitivity, unique to natural
rubber – reduces hand fatigue.
• Excellent resistance to many chemicals
• Superb resistance to knocks and abrasions
• Beaded, rolled cuffs, flocked lining
• AQL 0.65
• Size: 6½, 7½, 8½, 9½
• Colour: Black
Code: 304242Pair £2.99
Ansell VersaTouch ® Orange Glove Category III
87-370 All-over roughened hand surface gives extra grip.
Fluting on extra-long cuffs – increases air flow, reduces sagging.
• Tough, natural rubber; flock-lined
• Good resistance to many chemicals
• Suitable for food use
• Thickness: 0.67mm
• Length: 325mm
• AQL 0.65
• Size: 6½, 7½, 8½, 9½
• Colour: Orange
Code: 304259 Pair £2.99
3121 2010
Polyco Jet Black Glove Category III
A heavyweight glove that will stand up to repeated knocks,
rubbing and scuffing.
• Good slip resistant pattern on the palm enhances grip
• Soft cotton flock lining absorbs perspiration, keeping hands cool
• Thickness: 0.80mm
• Length: 310mm
• Size: 6 - 6½, 7 - 7½, 8 - 8½, 9 - 9½
3111
• Colour: Black
Code: 303220Pair £2.35
Polyco Nitri-Tech III Flock Lined Nitrile Glove Category
III
A re-usable nitrile glove that performs well against a wide range of chemicals
including strong detergents, oils and certain solvents.
• Synthetic rubber, contains no latex protein
• Good abrasion resistance
• Slip resistant pattern on the palm
• Good grip in both wet and dry conditions
• Sanitised containing a fungicidal and bacteriostatic agent
• Flock lining absorbs perspiration keeping hands cool
• Easy donning and doffing
• Also suitable for food handling
• Size: 7, 8, 9, 10
• Colour: Blue
4101
• Cartons of 12
Code: 304240 Pair £2.99
• Colour: Green
• Cartons of 12
Code: 304215Pair £2.65
61

Hand Protection
Chemical Resistant Gloves
Nitrile and rubber protective gloves offering certified quality at very competitive prices.
Keep Safe Satin Nitrile Unlined Glove Category III
Complex Design
Chemically toughened, high performance nitrile (100% NBR), specially
formulated for dexterity and superior grip.
• High resistance to animal fats, oils, most solvents
• Unflocked interior – minimises airborne cross infection
• Food safe, latex protein free
• For wide ranging industrial applications
• Size: M, L, XL
• Colour: Blue
1000
• Cartons of 72
Code: 303051 Pair £1.26
Keep Safe Heavyweight Rubber Glove Category III
Complex Design
AJK
Heavyweight rubber – good resistance to knocks and abrasion.
• Patterned grip, flock lining
• For variety of uses
• Size: S, M, L, XL
3121
• Colour: Black
Code: 304293Pair £1.99
62
Keep Safe Long Nitrile Glove Category III Complex
Design
Resistant to animal fats, solvents, alkalis.
• Patterned grip, good dexterity
• Good abrasion resistance
• Flock lining
AJK
• Length: 400mm
• Size: M, L, XL
• Colour: Green
4002
• Cartons of 36
Code: 304213 Pair £5.49
Keep Safe Natural Rubber Glove Category III
Complex Design
Excellent general purpose glove.
• Patterned grip, flock lined
• For industrial cleaning, many other applications
• Size: S, M, L
• Colour: Yellow
1021
Code: 304256Pair £1.49

Chemical Resistant Gloves
ALL CONFORM TO EN 388 AND EN ISO 10819 INTERMEDIATE DESIGN
Hand Protection
Ansell Emperor Heavyweight
Industrial Natural Rubber Glove
• High resistance to water based chemicals
• Unlined 100% rubber latex unsupported
• Beaded cuff for tear resistance
• Smooth finish
• Chlorinated to harden and cleanse surface of
glove
• AQL 0.65
• Size: 7½, 8½, 9½, 10½
• Colour: Black
4121
• Cartons of 12
ME 105 Length: 432mm Thickness: 150mm
Code: 304227 Pair £14.99
ME 108 Length: 610mm Thickness: 150mm
Code: 304233 Pair £22.99
Ansell Emperor Mediumweight
Industrial Natural Rubber Glove
• Bead cuff for tear resistance and easy donning
• High resistance to water based chemicals
• Smooth finish
• Unlined 100% natural rubber
• Chlorinated to harden and cleanse surface
• AQL 0.65
• Size: 7½, 8½, 9½, 10½
• Colour: Black
• Cartons of 12
4121
ME 104 Length: 432mm Thickness: 120mm
Code: 304226 Pair £11.99
ME 107 Length: 610mm Thickness: 120mm
Code: 304232 Pair £19.99
Polyco Long John PVC Coated
Gauntlet
Ideal for deep water – keeps wearer clean in muddy,
dirty environments.
• Integral sleeve
• Adjustable Velcro ® strap
• PVC coat, cotton liner
• For drainage works, fisheries, fish farming,
chemical handling
• Length: 640mm
4121
• Size: Men’s (9½)
• Colour: Red with dark green sleeve
• Cartons of 36
Code: 303049 Pair £14.99
Showa 660 PVC Oil Resistant
Gauntlet
Patented dipping process and special hydrocarbon treatment improves
performance and longevity.
• Waterproof, supple, comfortable cotton liner
• Rough finish on hand – secure grip
• PVC dipped, for greatest resistance to oils, chemicals
(hydrochloric acid, caustic soda, kerosene)
• Maximum resistance to abrasion (level 4)
• Length: 360mm
• Size: 9-11
• Colour: Blue
Code: 431546 Pair £5.99
Polyco Vyclear ® Clear Dipped PVC Glove
Transparent – chemical penetration immediately detected.
• Liner discolouration quickly spotted
• Ideal for general handling within chemical industry
• Length: 355mm (14")
• Size: 9, 9½, 10
• Colour: Clear
• Cartons of 50
Code: 304340 Pair £3.99
4121 4121
63

Hand Protection
Heat Resistant Gloves
ALL CONFORM TO EN 388 AND EN 407 INTERMEDIATE DESIGN
Keep Safe Comfort Leather Welder’s Gauntlet
Excellent value leather welding gauntlet.
• Cow split leather
• Fully lined with 100% cotton
• Fully welted
414X4X
• Length: 340mm
• Size: 10
• Colour: Red
3144
• Cartons of 12
Code: 304354Pair £8.49
• Size: 11
Code: 304357Pair £8.49
Keep Safe Pro Reinforced Ambidextrous
Welding Gauntlet
Quality cow split leather welder’s gauntlet.
• Kevlar ® stitching
• Cotton fleece on palm
• Cotton drill on cuff
• Cow split leather reinforced strap
on crotch of reversible thumb
• Sock lining
414X4X
• Length: 350mm
• Size: 11
• Colour: Red
3144
• Cartons of 12
Code: 015021 Pair £12.99
64
Keep Safe Goat Skin Tig Welder’s Gauntlet
Soft leather ensures maximum sensitivity to delicate welding operations yet
quality also ensures maximum protection from heat.
• Goat skin leather palm and fingers for a soft comfortable feel
• Nappa leather provides robust protection
• Chrome split leather on 6" cuff
• Light and flexible
41XX4X
• Mordant treatment to fix colour
• Size: 9
• Colour: Grey
3022
• Cartons of 12
Code: 303002 Pair £6.99
Ansell Mercury ® Kevlar ® Glove Category III Complex
Design
43-113 Constructed from 100% Kevlar ® para-aramid fibre with cotton liner.
• No seams where sparks could lodge
• Ambidextrous
• Heat resistance up to 350°C/660°F
• Protection against fire, Contact Heat, Convection Heat,
Radiant Heat & Molten Metal
• Machine washable at 40°C
43421X
• Length: 380mm
• Size: 10
• Colour: Yellow
254X
• Cartons of 36
Code: 304760 Pair £32.99

Cold Handling Gloves
Hand Protection
Keep Safe Hi Vis Latex Crinkle Finish Glove
Designed to protect up to -30°C/-85°F.
The glove combines excellent thermal qualities, comfort and high visibility.
• Latex crinkle coating on palm
• Good grip in wet and dry conditions
• Seamless liner for comfort
• Ideal for winter conditions
• Fleece liner keeps hands warm
020
• Uncoated back allows the hand to breathe
• Size: 8, 9, 10, 11
• Colour: Orange
1231
• Cartons of 12
Code: 304952Pair £6.49
252 JUBA ® Winter Ergonomic Seamless
Glove
• Blend of polyester and cotton
• Rough latex coating on palm
• Terry towelling interior protects from cold
• Latex dip protects from mechanical hazards
X1X
• Optimum grip on wet and dry surfaces
• Size: M, L, XL
• Colour: Black/Grey
2241
• Cartons of 10
Code: 304707 Pair £4.99
Keep Safe Insulating Grip Glove
Close fitting thermo glove with single sided dot coating.
• Thermolite fibre provides comfort and warmth
• Breathable liner prevents build up of moisture
on the hand
• Dotting ensures great grip
• 13 gauge Thermolite thermal knit, single side dot coating
• Good grip, abrasion resistance
• Size: One size fits all
• Colour: Navy Blue
• Cartons of 10
Code: 303147 Pair £7.49
Endurance Thermal Insulating Glove
Ideal warm liner glove for cold area product handling.
• One piece knitted Thermolite fibre glove
• Soft and non-chafing
• Warm and comfortable
• Ideal as a liner under food grade latex/nitrile glove
• 13 gauge Thermolite thermal knit
• Optimum warmth
• Size: One size fits all
• Colour: Navy Blue
• Cartons of 10
Code: 303145 Pair £6.49
Honeywell Cold Grip Glove
• Special PVC foam palm and knuckle coating – good
grip in wet
• High flexibility maintained in temperatures down
to -25ºC
• Seamless knitted, brushed liner gives good
insulation
02X
• Size: L, XL, XXL (9, 10, 11)
• Colour: Blue/Black
• Cartons of 12
Code: 304402Pair £4.99
1131 3232
65

Safety Footwear
Buying Guide
Choose the right footwear
Most workplaces have varying requirements for the provision of safety footwear, which is why we offer a
comprehensive range within which you should be able to identify appropriate footwear to meet the needs of your
workforce whatever the hazards identified in your risk assessment.
Whilst protection is paramount it is recognised that with long wear periods, often in hostile conditions, wearer
acceptance, design, brand and comfort are additional considerations. We therefore offer varying styles from
executive shoes to heavy duty rigger boots, and leading brands such as Dr Martens, Rock Fall, Dewalt, uvex &
Dunlop alongside our increasingly popular and cost effective Tuf Revolution and Tuf ranges.
Slip Resistance
Slips, trips and falls are an ever present hazard within most workplaces and safety footwear can play it’s part in
preventing injury, particular from slips, by featuring slip resistant soles.
For many years the test of choice for slip resistance has been SATRA’s TM144 standard which evaluates the
performance of the sole unit on a water wet quarry tile. Well established styles of footwear are likely to have been
tested to TM144 and will be identified as such by the TM144 icon.
However with regard to new styles or footwear undergoing periodic re-testing the recently established EN ISO
13287 with it’s progressive SRA, SRB and SRC ratings has become more widely used.
Details of the EN ISO 13287 testing requirements are shown in the table below:
Marking
Slip resistance ratings for industrial PPE footwear in Europe
Footwear slip resistant on
Marking symbols and specifications
Footwear tested to EN ISO 13287 and the rating achieved will be identified by the appropriate SRA/SRB/SRC icon.
Maintenance
As with all footwear it is essential that, to achieve optimum performance of the properties built in to the safety
footwear at time of manufacture, safety footwear is cleaned and maintained regularly.
Sizing
Safety footwear often carries European sizing. Please see below for a comparison table.
Shoe Size Conversion Table
This table is for guidance only as sizes are not standardised
British 2 3 4 5 6 7 8 9 10 11 12 13
Continental 35 36 37 38 39 41 42 43 44 46 47 48
Minimum coefficient of friction by ISO 13287:2006
Forward heel slip
Forward flat slip
SRA Ceramic tile with 0.5% SLS solution 0.28 0.32
SRB Steel with 90% glycerine 0.13 0.18
SRC Both the above Both the above on respective surfaces Both the above on respective surfaces
NB: ISO 13287:2006 is identical to EN ISO 13287:2007
Health & Safety
Legislation
EN ISO 20345:2011 is the current standard
to which new and recently certified
footwear has to conform (Whilst stock
rotates some safety footwear may have
been tested to the previous standard).
The standard to which the footwear
conforms will be identified on the product
information label within the footwear.
The standard requires the inclusion of a
200 joule toe cap for impact protection. In
addition to the over arching requirements
of the standards there are a number of
progressive ratings which assist selection
of footwear appropriate for varying
workplace hazards, these are:
• SB – safety basic footwear meeting
all the minimum requirements of the
standard
• S1 – additionally featuring anti-static
properties and fully enclosed and energy
absorbing heel unit
• S2 – additionally featuring the use of
water resistant leather
• S3 – additionally featuring cleated
outsole and pierce resistant midsole
• S4 – rubber or polymeric waterproof
footwear with 200 joule toe cap, antistatic
properties and energy absorbing
heel unit
• S5 – additionally featuring cleated
outsole and pierce resistant midsole
Additional protective features can be built
into the footwear and are identified by the
following suffixes:
• P – protection from upward penetration
provided by a composite or steel midsole
(not used in conjunction with S3 or S5)
• M – metatarsal impact protection
• C – conductive properties helping to
prevent the build-up of static (but no
protection against electric shock)
• A – anti-static properties to prevent the
build-up of static and give limited
protection against electric shock from
nominal mains voltage
• HI – insulation against heat
• CI – insulation against cold
• E – energy absorption in heel unit
• WRU – water resistant uppers
• HRO – resistance to hot contact up to
300°C
Safety Icons Key
LADIES SIZES
Denotes footwear suitable for women
Denotes footwear with safety toe cap
WATER
PROOF
Denotes waterproof footwear
Denotes SRB rating
TOECAP
MIDSOLE
Denotes footwear with safety midsole
TM144
Denotes TM144 rating
SRA
Denotes SRA rating
66
WATER
RESISTANT
Denotes water repellent footwear
ANTISTATIC
Denotes footwear with anti-static soles
SRC
Denotes SRC rating

Safety Footwear
67125

Safety Footwear
S3 Water Resistant Safety Boots
TOECAP
ANTISTATIC MIDSOLE SRC
Tuf 8.5” Hi-Leg Zip Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Side zip hi leg style full grain crazy horse leather
• Water resistant hard wearing and breathable leather upper
• Abrasion resistant lining with padded collar and tongue
• PU/rubber outsole heat resistant to 300°C
• Hard wearing TPU scuff cap for abrasion resistance
• Pierce resistant stainless steel midsole
• Size 6-13 (full sizes only)
• Colour: Black
Code: 100207 Pair £68.99
TOECAP
ANTISTATIC MIDSOLE SRC ANTISTATIC
TOECAP
MIDSOLE SRC
68
Tuf 7.25" Mid-Cut Ankle Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Mid height style full grain crazy horse leather.
• Water resistant hard wearing and breathable leather upper
• Padded collar and tongue for comfort
• High abrasion resistant lining for durability
• Hard wearing TPU scuff cap for abrasion resistance
• PU/rubber outsole for comfort and durability
• Heat resistant to 300°C
• Pierce resistant stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 100206 Pair £57.99
Tuf Chukka Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Low cut style full grain crazy horse leather.
• Water resistant hard wearing and breathable leather upper
• Padded collar and tongue for comfort
• Speed lacing system
• High abrasion resistant lining for durability
• Hard wearing TPU scuff cap for abrasion resistance
• PU/rubber outsole for comfort and durability
• Heat resistant to 300°C
• Pierce resistant stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 100205 Pair £46.99

S3 Water Resistant Composite Safety Boots
A range of S3 safety boots incorporating the latest styles, technologies and materials designed for maximum protection on site.
All have water resistant leather uppers, non-metallic toe caps, pierce resistant midsoles, and a rugged, cleated outsole.
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
Rock Fall Titanium Hi-Leg Non-Metallic Waterproof
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO HI WR SRC
RF4500 Luxury American full grain leather uppers with abrasion resistant
breathable mesh panels.
• Comfort+ foam padded collar - incredible comfort and ankle support on uneven
ground
• Shock absorbing EVA footbed
• Rubber scuff cap and kick off protector
• Solid rubber outsole bonded using heat resistant glue
• Mud and waterproof non-metallic YKK side zip
• Exclusive R-TEN ® sewing thread, enhanced resistance to Limestone, Concrete and
Salt Water
• Size: 3-14 (full sizes only)
• Colour: Black
Code: 102048 Pair £89.99
Safety Footwear
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
Tomcat Rhyolite Metatarsal Non-Metallic Waterproof
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 M HRO WR SRC
TC3000A Super lightweight, luxury metatarsal protection safety boot.
• Deep padded collar - extra support, comfort
• Unique patented ROC-MET internal metatarsal guard
• Revolutionary metatarsal protection, highest comfort and flexibility
• Ultimate traction rubber outsole
• Size: 5-14 (full sizes only)
• Colour: Black
Code: 102024Pair £78.99
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
Rock Fall Slate Wateproof Composite Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Robust yet lightweight safety boots
•100% non-metallic toecap and composite protective midsole
• Durable dual density PU/rubber outsole
• Slip resistant
• Size: 3-15 (full sizes only)
• Colour: Black
Code: 100090Pair £67.20
69

Safety Footwear
S3 Waterproof Safety Boots
MAIN FEATURES
• Water resistant leather
upper
• Fully waterproof lining
• Padded collar and
tongue
• Dual density PU sole
• Pierce resistant
stainless steel midsole
Tuf
Waterproof
Safety Boot
With Midsole
CONFORMS TO EN 20345:2011
200 JOULES S3 SRC
• Quality water resistant
leather upper and fully
waterproof lining
• Padded collar and tongue
• Full length footbed
• Pierce resistant stainless
steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 102003 Pair £59.99
TOECAP
ANTISTATIC
SRC
WATER
MIDSOLE PROOF
TOECAP
ANTISTATIC
MIDSOLE
SRA
WATER
PROOF
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
PROOF
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
PROOF
70
Tuf Premium Waterproof Safety
Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRA
Quality water resistant leather upper, fully
waterproof lining.
• Padded collar, full length footbed
• Anti-static EVA rubber sole, heat resistant to
300ºC
• Pierce resistant stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 198252Pair £71.99
Tuf XT Event ® Waterproof Nonmetallic
Safety Boot With Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC
Buffalo grain leather with highly breathable fully
waterproof liner for comfort.
• Padded collar and half bellows tongue for
easy donning
• Metal free lacing system
• EVA/Rubber outsole with TPU counter support
for durability
• Outsole heat contact resistant to 300°C
• PEP non-metallic composite toecap and
penetration resistant midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 100220Pair £84.99
Tuf Leather Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 WRU SRC
S3 Full grain leather hiker styled safety boot
incorporating FORCE10® Advanced Durability
Components.
• Premium Full Gain Leather Upper
• Padded Collar for Enhanced Comfort and
Support
• Steel Toecap and Stainless Steel Midsole
• FORCE10 GR100 Solid Nitrile Rubber Outsole
Manufactured using a Virgin Nitrile Rubber
Compound for The Highest Durability
• IMPACT SHIELD Internal Digging Plate
• EVA Footbed providing Increased Anti-Fatigue
Properties
• Size: UK 6 - 12
• Colour: Green/Red
Code: 198768Pair £72.99

S3 Waterproof Safety Boots
ANTISTATIC
TOECAP
MIDSOLE WATER
SRC
PROOF
TOECAP
ANTISTATIC
SRC
WATER
MIDSOLE PROOF
Safety Footwear
Tuf XT eVent ® Waterproof 8.5” Hi-Leg Zip
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC
Full grain crazy horse leather with highly breathable
fully waterproof liner for comfort.
• Padded collar and tongue for comfort
• YKK ® side zip for quick and easy access
• Hard wearing TPU scuffcap for abrasion resistance
• PU/Rubber outsole for comfort and durability
• Outsole heat contact resistant to 300°C
• Pierce resistant stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 100325Pair £89.99
Tuf XT eVent ® Waterproof 7.25" Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC
Full grain crazy horse leather with highly breathable
fully waterproof liner for comfort.
• Padded collar and tongue for comfort
• Hard wearing TPU scuffcap for abrasion resistance
• PU/Rubber outsole for comfort and durability
• Outsole heat contact resistant to 300°C
• Pierce resistant stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 100322Pair £78.99
S3 Water Resistant Safety Boots
Ideal for construction and industries where safety and pierce resistant midsoles are important,
these styles also have water resistant leather uppers.
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
Rock Fall ® Quartz Safety Boot with Midsole
CONFORMS TO EN 345 20345:2011 200 JOULES S3 HRO HI SRC
Luxury full grain American leather uppers and Honey Nubuck. Thermo-plastic
internal heel counter providing optimum ankle stability.
• Dual lining – temperature regulating Thinsulate, durable moisture wicking cambrelle
• Genuine Goodyear welted rubber outsole resistant to 300°C,
oil and certain acids/alkalis
• New lightweight, flexible Activ-Step ® outsole
• Composite midsole
• Size: 4-14 (full sizes only)
• Colour: Black
Code: 102064Pair £72.99
D-Ring Chukka Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Speed lacing system.
• Padded collar and tongue
• Dual density polyurethane anti-static sole
• Size: 5-12 (full sizes only)
• Colour: Black
Code: 102030Pair £36.99
71

Safety Footwear
S3 Safety Boots
WATER
LADIES SIZES
RESISTANT
ANTISTATIC
TOECAP
MIDSOLE
SRC
LADIES SIZES
TOECAP
WATER
RESISTANT ANTISTATIC MIDSOLE
Pro-Man PM100 Chukka Boot with Steel Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3
• Dual density PU sole
• Black leather chukka boot
• Deep padded collar
• Water resistant
• Steel toe cap midsole
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 430475 Pair £19.12
Pro-Man PM600 with Non-Metallic Composite Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
• Anti-fatigue footbed with moisture wicking tiberelle lining
• Anti-static properties
• Abrasion resistant internal heel counter
• PU moulded scuff cap
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 101123 Pair £48.07
LADIES SIZES
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
LADIES SIZES
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
72
uvex Heckel MACsole ® 1.0 FXH and FXL
CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO SRC
• Full grain leather boot
• Rubber scuff cap protects the leather upper from abrasion
• Removable PU insole - full surface shock absorption, and wicks away moisture
increasing foot comfort and hygiene
• 100% non-metallic lightweight toe cap - doesn’t conduct heat
• ESD rated
• Non-metallic penetration-resistant midsole covers 100% of the footbed
• MACsole 1.0® sole unit – self-cleaning tread, increased slip resistance,
high shock absorption. Heat-resistant up to 300°C.
• Also resistant against cuts, oils and chemicals
• Size: 3-13
• Colour: Black/Red
Code: 431426 Pair £58.50
uvex Heckel MACsole ® 1.0 FXH and FXL
CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO SRC
• Full grain leather boot
• Rubber scuff cap protects the leather upper from abrasion
• Removable PU insole - full surface shock absorption, and wicks away moisture
increasing foot comfort and hygiene
• 100% non-metallic lightweight toe cap - doesn’t conduct heat
• ESD rated
• Non-metallic penetration-resistant midsole covers 100% of the footbed
• MACsole 1.0® sole unit – self-cleaning tread, increased slip resistance,
high shock absorption. Heat-resistant up to 300°C.
• Also resistant against cuts, oils and chemicals
• Size: 3-13
• Colour: Black/Red
Code: 431427 Pair £53.50

S3 Safety Boots
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
S3 Safety Shoes
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
Safety Footwear
uvex Heckel SUXXEED ® boot
CONFORMS TO EN ISO 20345:2011 S3 SRC
• Ultra lightweight boot with oiled hydrosuede leather upper
• Climate airmesh inner lining offering excellent ventilation
• Breathable perforated velour leather offers further ventilation, allowing foot to
breathe and effectively stay dry
• 100% non-metallic lightweight toe cap - doesn’t conduct heat
• Non-metallic penetration-resistant midsole covers 100% of the footbed
• Self-cleaning sole profile prevents dirt building up and increases slip resistance
(SRC rated)
• Double density PU sole offering excellent shock absorption and resistant to
chemicals such as oils and hydrocarbons
• Size:5-12
• Colour: Black/Red
Code: 431428 Pair £57.95
uvex Heckel SUXXEED ® shoe
CONFORMS TO EN ISO 20345:2011 S3 SRC
• Ultra lightweight boot with oiled hydrosuede leather upper
• Climate airmesh inner lining offering excellent ventilation
• Breathable perforated velour leather offers further ventilation, allowing foot to
breathe and effectively stay dry
• 100% non-metallic lightweight toe cap - doesn’t conduct heat
• Non-metallic penetration-resistant midsole covers 100% of the footbed
• Self-cleaning sole profile prevents dirt building up and increases slip resistance
(SRC rated)
• Double density PU sole offering excellent shock absorption and resistant to
chemicals such as oils and hydrocarbons
• Size:5-12
• Colour: Black/Red
Code: 431429 Pair £55.25
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
uvex quatro pro boot
CONFORMS TO EN ISO 20345:2011 S3 SRC
• Rugged, hard wearing boot with extra wide fit
• Extremely comfortable dual density PUR sole with self-cleaning tread for
increased slip resistance. SRC rated
• Penetration resistant steel midsole
• Injection moulded scuff cap protects the leather
• Heel cap - improved stability and greater twist protection
• uvex climazone technology maintains optimum foot temperature
• uvex 3D hydroflex® foam insole - full surface shock absorption
• Outsole is heat resistant to +120°C
• Anti-static properties
• Oil and petrol resistant
• Size: 5-15
• Colour: Black
Code: 014799 Pair £71.35
uvex quatro pro shoe
CONFORMS TO EN ISO 20345:2011 S3 SRC
• Rugged, hard wearing boot with extra wide fit
• Extremely comfortable dual density PUR sole with self-cleaning tread for
increased slip resistance. SRC rated
• Penetration resistant steel midsole
• Injection moulded scuff cap protects the leather
• Heel cap - improved stability and greater twist protection
• uvex climazone technology maintains optimum foot temperature
• uvex 3D hydroflex® foam insole - full surface shock absorption
• Outsole is heat resistant to +120°C
• Anti-static properties
• Oil and petrol resistant
• Size: 5-15
• Colour: Black
Code: 431425 Pair £68.85
73

Safety Footwear
74

S3 Safety Boots
A range of safety boots with toe caps and penetration resistant midsole providing protection and comfort in harsh
working environments.
LADIES SIZES
TOECAP
ANTISTATIC
WATER
MIDSOLE SRC RESISTANT
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
Safety Footwear
Tuf Waxy Ankle Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Fully lined with breathable comfort lining.
• Padded collar
• Cushioned footbed
• Anti-static dual density sole with ladder grips
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 102625Pair £54.99
Tuf Pro Chukka Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
• Speed lacing system.
• Padded collar and tongue
• Dual density polyurethane anti-static sole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 102070Pair £42.99
S1P Safety Boots
TOECAP
ANTISTATIC
MIDSOLE SRC
TOECAP
ANTISTATIC
MIDSOLE
SRC
Dr Martens Workman Padded Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P HRO SRC
• Full grain leather upper with padded collar
• Smartmask ® PU cushioned footbed
• Nitrile/rubber outsole for grip and durability
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 101107Pair £75.99
Dr Martens Benham Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P HRO SRC
Athletic style safety hiker with breathable mesh upper.
• Padded collar for comfort
• Nitrile rubber outsole for durability heat resistant to 300°C
• Removable contoured and cushioned footbed for extra comfort
• Stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 101127Pair £65.99
75

Safety Footwear
S1P Safety Boots
ANTISTATIC
TOECAP
MIDSOLE
SRC
TOECAP
ANTISTATIC
MIDSOLE
SRA
TOECAP
ANTISTATIC
MIDSOLE
SRC
Tuf Dealer Safety Boot with
Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Elastic gusset and pull on heel loop.
• Cushioned footbed
• Anti-static dual density sole
• Stainless steel midsole
• Size: 5-12 (full sizes only)
• Colour: Black
• Width: Wide fit
Code: 195053Pair £44.99
DEWALT Laser 6" Hiker Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRA
DWF-50031 Industrial boot with quality leathers and
mesh uppers for breathability.
• Padded collar and tongue for comfort
• Injected PU/TPU sole for comfort and durability
• TPU re-inforced heel for extra support
• Dual density anti-bacterial insole for comfort and
odour reducing
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 106014 Pair £53.99
Tuf Goodyear Welted Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
• Hard wearing Goodyear Welt construction
• Quality leather uppers
• Padded collar and tongue for comfort
• Dual lacing system
• Size: 6-12 (full sizes only)
• Colour: Honey
Code: 102038Pair £63.99
S3 Safety Rigger Boots
A range of classic rigger boots specifically designed to uplift the old traditional image with smarter styling,
greater attention to detail, and superior quality.
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
LADIES SIZES
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
PROOF
76
Tuf Warm Lined Rigger Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Smooth leather with pull on loops.
• Ankle padding for extra support and protection
• Anti-static, dual density polyurethane sole unit
• Pierce resistant stainless steel midsole
• Size: 3-13 (full sizes only)
• Colour: Tan
Code: 101198Pair £59.99
Rockfall ® Texas 2 Non Metallic Rigger Boot
with Midsole
CONFORMS TO EN20345:2011 200 JOULES S3 WR HRO HI CI SRC
RF70 Premium specification rigger boot with oil tanned leather uppers and
generous fit around toe area.
• Cold insulation certified to -17°C
• Waterproof and breathable Activ-Tex lining
• Padded ankle support with flexi-collar for comfort
• Anti-fatigue EVA footbed
• Rubber kick off protector and brushed rubber scuff cap for durability
• FORCE10 ® nitrile rubber outsole for grip and abrasion resistance
• Pierce resistant non-metallic midsole
• Size 6-13 (full sizes only)
• Colour: Brown
Code: 101106Pair £78.99

Safety Rigger Boots
TOECAP
ANTISTATIC
MIDSOLE
SRC
Tuf Lined Rigger Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Grain leather, fleece lining, with slip resistant, shock absorbing sole.
• Anti-static, dual density polyurethane sole unit
• Pierce resistant stainless steel midsole
• Size: 5-13 (full sizes only)
• Colour: Tan
Code: 198204Pair £38.99
Safety Footwear
TOECAP MIDSOLE SRA
TOECAP
ANTISTATIC
MIDSOLE
SRA
WATER
PROOF
DEWALT Rigger 2 Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP HRO SRC
DWF-50071-121 Full grain leather upper with PU collar and TPU heel support.
• Sole heat resistant to 300°C
• Pierce resistant stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Brown
Code: 106016Pair £79.99
Dunlop Purofort ® Rig-Air Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI
C462743 Polyurethane body – 100% waterproof and insulated down to -20°C.
• Anti-bacterial lining
• Anti-static sole and pierce resistant stainless
steel midsole
• Size: 6-12 (full sizes only)
• Colour: Tan
• Unlined
Code: 101108 Pair £74.99
• Fur lined
Code: 101109 Pair £84.99
77

Safety Footwear
Safety Boots
TUF Revolution SBP Safety Footwear
Tuf Revolution brings lifestyle design to safety footwear. A revolutionary range of EN ISO 20345:2011 safety standard footwear
incorporating the latest styles and technology enabling you within your work life balance to simply DO MORE. With the additional
safety features of toe cap protection, flexible midsole penetration resistance and energy absorbing heel, Tuf Revolution gives you
innovation and performance with style.
Safety Trainers
TOECAP MIDSOLE SRC
TOECAP MIDSOLE SRC
Tuf Revolution Performance Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC
Skate boot styling nubuck leather upper material with reflective trim flash.
• Padded collar for comfort and ankle support
• Split suede padded tongue for strength and comfort
• Full length cushioned footbed
• Rubber shock absorbent slip resistant sole
• Energy absorbing heel unit to reduce fatigue
• Pierce resistant flexible composite midsole
• Size 6-12 (full sizes only)
• Colour: Honey
Code: 198251Pair £56.99
• Colour: Black
Code: 198250Pair £56.99
Tuf Revolution Performance Baseball Style Safety
Trainer Boot with Midsole
CONFORMS TO EN 320345:2011 200 JOULES SBP E SRC
Baseball boot style with suede and canvas upper material.
• Smooth rubber scuff cap
• Padded collar for comfort and ankle support
• Canvas padded tongue for strength & comfort
• Full length cushioned footbed
• Rubber shock absorbent slip resistant sole
• Energy absorbing heel unit to reduce fatigue
• Pierce resistant flexible composite midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100539Pair £57.99
78

Sb Safety Boots
A range of footwear with classic styling and basic safety toe cap protection only.
TOECAP MIDSOLE SRA LADIES SIZES
TOECAP SRA
WATER
RESISTANT
Safety Footwear
Dr Martens Icon Leather Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Iconic Dr Martens Airwair safety boot, with Cosmo ® Pibitex lining and Smartmask ®
footbed for high comfort.
• Full leather upper
• Dr. Martens air cushioned commando style sole
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 101102Pair £81.99
Dr Martens Tred Hiker Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB HRO SRA
Water resistant full grain leather upper; classic hiker style with padded collar.
• Highly flexible, with PU midsole – high degree of comfort, durability
• Rubber outsole heat resistant to 300°C
• Size: 7-12 (full sizes only)
• Colour: Black
Code: 101143Pair £79.99
• Size: 6-12 (full sizes only)
• Colour: Brown
Code: 101144Pair £79.99
TOECAP
SRA
TOECAP
SRA
DEWALT Apprentice 6" Taped Work Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB HRO SRA
DWF-60011-103 Full grain leather Nubuck upper, with brass facings and TPU heal
support.
• EVA inner sole – dual density anti-bacterial insole
• EVA cemented rubber outsole – heat resistant to 300°C
• Size: 6-12 (full sizes only)
• Colour: Honey
Code: 106015Pair £69.99
• Colour: Black
Code: 106010Pair £69.99
Dr Martens Icon Dealer Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Traditional dealer boot, with full leather upper and black elastic gusset.
• Dr Martens air cushioned commando style sole
• Yellow Z welt stitch
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 101320Pair £67.99
TOECAP
SRA
Dr Martens Icon Chukka Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Full leather upper with Cosmo ® Pibitex lining and Smartmask ® footbed for high
comfort.
• Dr. Martens air cushioned commando style sole
• Size: 5-12 (full sizes only)
• Colour: Black
Code: 102006Pair £78.99
79

Safety Footwear
Safety Trainers
S3 Safety Trainers
TOECAP
ANTISTATIC MIDSOLE SRC
TOECAP
ANTISTATIC MIDSOLE SRC
Rockfall ® TeslaDRI ESD Safety Trainer Boot with Midsole
CONFORMS TO EN20345:2011 200 JOULES S3 SRC AND EN61340-5-1:2007
RF120 Premium super lightweight midcut safety trainer with high breathability
and moisture wicking.
• Lightweight hard wearing and water repellent upper material
• Sympatex Climate Technology® for optimal breathability and ventilation
• Improved air circulation through 3D air pockets
• Removable PU anti-fatigue insole for enhanced comfort on hard floors
• Phylon and Rubber anti-fatigue outsole with enhanced comfort properties
• Injection moulded scuff cap for abrasion resistance
• Pierce resistant non-metallic midsole
• Size 6-13 (full sizes)
• Colour: Black
Code: 100083Pair £69.99
Rockfall ® FaraDRI ESD Safety Trainer with Midsole
CONFORMS TO EN20345:2011 200 JOULES S3 SRC AND EN61340-5-1:2007
RF008 Premium super lightweight lowcut safety trainer with high breathability
and moisture wicking.
• Lightweight hard wearing and water repellent upper material
• Sympatex Climate Technology® for optimal breathability and ventilation
• Improved air circulation through 3D air pockets
• Removable PU anti-fatigue insole for enhanced comfort on hard floors
• Phylon and Rubber anti-fatigue outsole with enhanced comfort properties
• Injection moulded scuff cap for abrasion resistance
• Pierce resistant non-metallic midsole
• Size 6-13 (full sizes)
• Colour: Black
Code: 100084Pair £69.99
S1P Safety Trainers
SBP Safety Trainers
TOECAP
ANTISTATIC MIDSOLE SRA
TOECAP MIDSOLE SRC
80
DEWALT Cutter Non-Metallic Safety Trainer with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRA
DWF-60086-126 Very lightweight, with fabric and mesh breathable upper and
Aerospace lining.
• Dual density anti-bacterial insole
• EVA/rubber cemented sole
• Rubber toe guard, composite toe cap
• Pierce resistant midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 106011Pair £72.99
Tuf Revolution Performance Safety Trainer Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC
Trainer boot style with suede and mesh fabric upper
material with reflective trim flash.
• Brushed rubber scuff cap and counter support
• Padded collar for comfort and ankle support
• Split suede padded tongue for strength and comfort
• Full length cushioned footbed
• Rubber shock absorbent slip resistant sole
• Energy absorbing heel unit to reduce fatigue
• Pierce resistant flexible composite midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100537Pair £54.99

MAIN FEATURES
• Low profile styling
• Lightweight
materials
• Padding for comfort
• Textured scuff cap
• Cemented rubber
outsole
• Steel toe cap and
PEP flexible midsole
for penetration
resistance
Tuf Revolution
Performance
Low Profile
Safety Trainer
with Midsole
CONFORMS TO EN 20345:2011
200 JOULES SBP E SRA
Action nubuck, mesh and fabric
upper on a low profile outsole.
• Padded collar and tongue
• Full length footbed
• Dual layer scuff cap and heel
counter
• Pierce resistant flexible midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 100538 Pair £50.99
Safety Footwear
TOECAP MIDSOLE SRA
SBP Safety Trainers
TOECAP MIDSOLE SRC TOECAP
ANTISTATIC MIDSOLE SRC LADIES SIZES
Tuf Revolution Performance Safety Trainer Shoe with
Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC
Suede and mesh fabric upper, with full length cushioned footbed and ankle and
counter support.
• Padded collar, tongue
• Brushed rubber scuff cap
• Rubber shock absorbent, slip resistant sole
• Pierce resistant flexible midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 100536Pair £50.99
Tuf Safety Trainer Shoe with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Leather upper with dual density anti-static sole.
• Padded collar, tongue
• Pierce resistant stainless steel midsole
• Size: 3-12 (full sizes only)
• Colour: Black
Code: 143004Pair £44.99
81

Safety Footwear
Tuf Composite Safety Footwear
TOECAP
ANTISTATIC MIDSOLE SRC
WATER
RESISTANT
This Tuf safety footwear range conforms to S1, S1P and S3 safety standards,
whilst offering outstanding value when price is important.
TOECAP
ANTISTATIC MIDSOLE SRC
Tuf Grain Leather Non-Metallic Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Highly breathable lining, multi- perforated anatomic footbed.
• Polymeric toe cap
• Polyurethane dual density anti-static sole
• Flex system midsole
• Size: 5-12 (full sizes only)
• Colour: Black
Code: 160680Pair £39.99
Tuf Lace-Up Non-Metallic Safety Shoe with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
• Leather upper, padded collar
• Anti-static sole
• Pierce resistant midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 100147 Pair £29.99
TOECAP
ANTISTATIC MIDSOLE SRC LADIES SIZES
ANTISTATIC
TOECAP
MIDSOLE SRC
TOECAP
ANTISTATIC MIDSOLE SRC LADIES SIZES
WATER
RESISTANT
82
Tuf D-Ring Chukka Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
• Leather upper, padded collar
• Anti-static sole
• Pierce resistant steel midsole
• Size: 2-13 (full sizes only) Extended size range
• Colour: Black
Code: 102041Pair £24.99
Standard Chukka Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
• Leather upper, padded collar
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 431501Pair £24.99
Tuf Lace-Up Safety Shoe
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
• Leather upper, padded collar
• Anti-static sole
• Pierce resistant steel midsole
• Size: 2-13 (full sizes only)
• Colour: Black
Code: 142021Pair £26.99

Safety Shoes
TOECAP
SRA
TOECAP
WATER
RESISTANT ANTISTATIC LADIES SIZES SRC
Safety Footwear
Dr Martens Icon Leather Safety Shoe
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Smart, durable Dr. Martens classic, upgraded with Smartmask ® PU-cushioned
footbed.
• Industrial strength leather
• Unbeatable underfoot comfort of air-cushioned sole
• Size: 5-13 (full sizes only)
• Colour: Black
Code: 142349Pair £61.99
Tuf Unisex Microfibre Slip-on Safety Shoe
CONFORMS TO EN 20345:2011 200 JOULES S2 SRC
Lightweight technology, with microfibre uppers that are resistant to many oils,
acids and chemicals.
• Machine washable at 30°C for two washes
• Padded collar and full length footbed for comfort
• Anti-static dual density slip resistant soles
• Steel toe caps
• Size: 2-13 (full sizes only)
• Colour: White
Code: 198624Pair £39.99
TOECAP
ANTISTATIC
MIDSOLE SRC
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE SRC LADIES SIZES
Dr Martens Workman Padded Safety Shoe with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P HRO SRC
Multi- purpose safety shoe with full grain leather upper.
• Padded collar and tongue for comfort
• Smartmask ® PU cushioned footbed
• Nitrile rubber outsole heat resistant to 300°C
• Pierce resistant stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 143017Pair £71.99
Tuf Safety Shoe with Midsole
CONFORMS TO EN 20345: 2011 200 JOULES S3 SRC
Classic style work shoe with smooth leather upper.
• Padded collar and tongue for comfort
• Abrasion resistant mesh fabric lining
• Full length foam fabric footbed
• Energy absorbing heel to reduce fatigue
• Pierce resistant stainless steel midsole
• Size: 4-12 (full sizes only)
• Colour: Black
Code: 143625Pair £49.99
83

Safety Footwear
WATER
PROOF
MIDSOLE
LADIES SIZES
SRA
Tuf Safety Wellington Knee Boots
A high quality range of safety wellington knee boots designed for
the construction, agricultural and food industries.
TOECAP
WATER
PROOF
LADIES SIZES
SRA
Tuf Safety Wellingtons with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 SRA
• PVC with PVC/nitrile sole; oil, acid, alkali, fat resistant
• Ribbed heel with kick-off tab to assist removal
• Pierce resistant steel midsole
• Size: 3-13 (full sizes only)
• Colour: Black with Black sole
Code: 165022 Pair £16.99
Tuf Food Industry Safety Wellingtons
CONFORMS TO EN 20345:2011 200 JOULES S4 SRA
• PVC with PVC/nitrile sole; oil, acid, alkali, fat resistant
• Ribbed heel to assist removal
• Size: 3-13 (full sizes only)
• Colour: White with White sole
Code: 165020 Pair £15.99
Tuf Thigh and Chest Wader Safety Boots
TOECAP
WATER
PROOF
MIDSOLE
SRA
TOECAP
WATER
PROOF
MIDSOLE
SRA
84
Tuf Safety Chest
Wader with Midsole
CONFORMS TO EN 20345:2011
200 JOULES S5 SRA
• Chest wader with over
shoulder braces
• PVC with PVC/nitrile sole
• Oil, acid, alkali, fat resistant
• Ribbed heel tab to assist
removal
• Pierce resistant steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 165025Pair £104.99
Tuf Safety Thigh Wader
with Midsole
CONFORMS TO EN 20345:2011
200 JOULES S5 SRA
• Thigh length wader, with fleece
lined extension and belt loop straps
• PVC with PVC/nitrile sole
• Oil, acid, alkali, fat resistant
• Ribbed heel tab to assist removal
• Pierce resistant steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 165024Pair £66.99

Dunlop Purofort ® Safety Wellingtons
Dunlop ® is the only company with the Purofort ® Technology and invented the first Polyurethane boot. Specialised high
pressure manufacturing introduces millions of tiny air bubbles into the synthetic material during manufacture. This gives
Purofort ® boots their remarkable and unique properties.
TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA
TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA
LADIES SIZES
Safety Footwear
Dunlop Purofort ® Thermo Plus Full Safety Wellington
Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRC
C662343 Lightweight, durable; polyurethane Thermo+ upper and sole can
withstand conditions down to -50°C.
• Resistant to minerals, animal and vegetable oils and fats, disinfectants, manure,
solvents and various chemicals
• Heat retaining sole
• Shock absorbing technology
• Flexible upper – ease of movement
• Pierce resistant stainless steel midsole
• Size: 5-12 (full sizes only)
• Colour: Orange with Blue sole
Code: 164774 Pair £99.99
Dunlop Purofort ® Full Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRC
C762041 Polyurethane upper and sole – acid, alkali, oil, fat resistant.
• Anti-static sole
• Washable nylon lining
• Pierce resistant steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 164050 Pair £69.99
TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA
TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA
LADIES SIZES
Dunlop Purofort ® Professional Safety Wellingtons
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRA
C462241 Polyurethane upper, with anti-static, energy absorbing, cold-insulating
sole.
• Acid, oil, fat resistant
• Washable nylon lining
• Pierce resistant steel midsole
• Size: 6-13 (full sizes only)
• Colour: Yellow with Black sole
Code: 164773 Pair £67.99
Dunlop Purofort ® Professional Safety Wellingtons with
Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRA
C462933 Polyurethane upper, anti-static, energy absorbing, cold-insulating sole.
• Acid, oil, fat resistant
• Washable nylon lining
• Pierce resistant steel midsole
• Size: 4-13 (full sizes only)
• Colour: Green with Black sole
Code: 160746 Pair £62.99
85

Safety Footwear
Dunlop Purofort ® Food Wellingtons
Dunlop ® introduces a new generation of Purofort ® wellingtons explicitly designed for the Food Processing Industry. These
wellingtons offer addition to all of the benefits of Purofort ® technology, solutions based on all the specific needs within
this industry with the addition of anti-bacterial lining and extra smooth upper, easy to clean in boot washer for cleanliness.
TOECAP
WATER
PROOF
ANTISTATIC LADIES SIZES
SRC TOECAP
WATER
PROOF
ANTISTATIC LADIES SIZES
SRC
Dunlop Purofort ® FoodPro MultiGrip Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES S4 CI SRC
CA61831 Recognised food industry safety boot.
• Specifically designed to offer the highest slip resistance in (semi-) solid
contaminated areas
• Upper insulated down to -20°C
• Stays flexible even at low temperatures
• Durable and shock absorbant
• Anti-slip sole resistant to: mineral, animal and vegetable oils and fats, manure,
blood, disinfectants, solvents and various chemicals
• Size 3-12 (full sizes only)
• Colour: Green with Brown sole
Code: 160754 Pair £59.99
Dunlop Purofort ® FoodPro MultiGrip Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES S4 CI SRC
CA61131 Recognised food industry safety boot.
• Specifically designed to offer the highest slip resistance in (semi-) solid
contaminated areas
• Upper insulated down to -20°C
• Stays flexible even at low temperatures
• Durable and shock absorbant
• Anti-slip sole resistant to: mineral, animal and vegetable oils and fats, manure,
blood, disinfectants, solvents and various chemicals
• Size 3-12 (full sizes only)
• Colour: White with Blue sole
Code: 160759 Pair £59.99
TOECAP
WATER
PROOF
ANTISTATIC LADIES SIZES
SRC
Dunlop Purofort ® FoodPro HydroGrip Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES S4 CI SRC
CB61131 Recognised food industry safety boot.
• Specifically designed to offer the highest slip resistance in
wet, contaminated areas
• Upper insulated down to -20°C
• Stays flexible even at low temperatures
• Durable and shock absorbant
• Anti-slip sole resistant to: mineral, animal and vegetable oils and fats, manure,
blood, disinfectants, solvents and various chemicals
• Size 3-12 (full sizes only)
• Colour: White with Blue sole
Code: 160755 Pair £59.99
86

Dunlop Safety Wellingtons
Safety and non-safety willingtons for Industry, Food, Agriculture and Leisure wear.
WATER
WATER
PROOF SRA TOECAP
MIDSOLE
PROOF
TOECAP
SRA
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
LADIES SIZES
SRA
Safety Footwear
Acifort Ribbed Safety Wellingtons
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP SRA
• A252931 PVC/nitrile upper and sole; acid, alkali, oil,
fat resistant
• Washable nylon lining
• Pierce resistant stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Red sole
Code: 164512Pair £29.99
Protomaster Safety Wellingtons
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
• 171BV PVC/nitrile upper and sole; resists acids,
bases, disinfectants, blood.
• Antibacterial washable lining
• Anti-slip sole
• Size: 3-13 (full sizes only)
• Colour: White with Green sole
Code: 164040 Pair £23.99
Protomaster Safety Wellingtons
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES
S5 SRA142 PP
• PVC/nitrile upper and sole; acid, base, disinfectant
resistant.
• Washable nylon lining
• Pierce resistant steel midsole
• Size: 3-13 (full sizes only)
• Colour: Black with black sole
Code 165012 Pair £20.99
Dunlop Non-Safety
Wellington Boots
TOECAP
WATER
PROOF
MIDSOLE
LADIES SIZES
SRA
TOECAP
WATER
PROOF
MIDSOLE
LADIES SIZES
SRA
WATER
PROOF
LADIES SIZES
Pricemaster Non-Safety Wellingtons
Dunlop Devon Basic Full Safety
Wellington - S5
• Steel toecap & midsole
• Oil resistant outside
• Antistatic
• Energy absorbing and cold insulating sole
• Material: PVC / nitrile rubber
• Sizes: 3-12
• Colour: Black
Code: 430136 Pair £15.79
Dunlop Devon Basic Full Safety
Wellington - S5
• Steel toecap & midsole
• Oil resistant outside
• Antistatic
• Energy absorbing and cold insulating sole
• Material: PVC / nitrile rubber
• Sizes: 3-12
• Colour: Green
Code: 430137 Pair £15.79
• PVC upper and sole; resistant to low concentration
acids, alkalis, disinfectants.
• Nylon lining, water resistant
• Size: 3-12 (full sizes only)
• 380PP
• Colour: Black with Black sole
Code: 164036Pair £16.99
• 380VP
• Colour: Green with Black sole
Code: 164034Pair £16.99
87

Safety Footwear
Ladies Safety Boots
Designed and manufactured specifically for ladies, these stylish and comfortable shoes
contribute to improving the work experience without compromising on quality.
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
Rock Fall VX950A Onyx Non-Metallic Waterproof Ladies
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO HI
Robust premium full grain leather upper.
• Padded collar and tongue
• Active-Tex ® waterproof and breathable dynamic membrane
• Anti-fatigue EVA comfort footbed
• Nitrile rubber outsole heat resistant to 300°C
• Lightweight composite toe cap and flexible composite midsole
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102061 Pair £67.99
Rock Fall VX950C Onyx Non-Metallic Waterproof Ladies
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO HI
Robust premium full grain nubuck leather upper.
• Padded collar and tongue
• Active-Tex ® waterproof and breathable dynamic membrane
• Anti-fatigue EVA comfort footbed
• Nitrile rubber outsole heat resistant to 300°C
• Lightweight composite toe cap and flexible composite midsole
• Size: 3-8 (full sizes only)
• Colour: Honey
Code: 102069 Pair £67.99
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
Rock Fall VX500 Emerald Ladies Lace-Up Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Classic styled work boot for easy fitting.
• Padded collar and tongue for comfort
• Breathable quality leather upper
• Moisture wicking breathable lining
• Energy absorbing heel
• Dual density PU outsole for comfort and wear
• Steel toe cap and composite midsole for protection
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102062 Pair £37.99
Rock Fall VX400 Amber Ladies Lace-Up Safety Shoe with
Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Classic styled work shoe for easy fitting.
• Padded collar and tongue for comfort
• Breathable quality leather upper
• Moisture wicking breathable lining
• Energy absorbing heel
• Dual density PU outsole for comfort and wear
• Steel toe cap and composite midsole for protection
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102053Pair £37.99
88
TOECAP
ANTISTATIC MIDSOLE SRA
Rock Fall VX700 Pearl Non-Metallic Ladies ESD Safety
Trainer with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRA, EN 61340 5-1:2007
Lightweight athletic style with navy suede upper.
• Padded tongue and collar
• Moisture wicking breathable lining
• Anti-fatigue EVA comfort footbed
• Durable rubber outsole for grip
• Composite toecap and midsole
• Size: 3-8 (full sizes only)
• Colour: Navy/Blue
Code: 102052 Pair £57.99

Ladies Safety Boots & Shoes
Designed and manufactured specifically for ladies, these stylish and comfortable shoes
contribute to improving the work experience without compromising on quality.
TOECAP
ANTISTATIC
SRC
TOECAP
ANTISTATIC
SRC
Safety Footwear
uvex 1 Shoe
CONFORMS TO EN ISO 20345:2011 S2 SRC. ESD RATED
• Multi-purpose safety trainer
• 100% metal free
• Made with synthetic materials
• Elastic laces for quick, individual adjustment
• Outsole is resistant to temperatures up to +120ºC
• Size: 3-15
• Colour: Black
Code: 431421 Pair £74.95
uvex 1 Boot
CONFORMS TO EN ISO 20345:2011 S2 SRC. ESD RATED
• Multi-purpose safety trainer
• 100% metal free
• Made with synthetic materials
• Elastic laces for quick, individual adjustment
• Outsole is resistant to temperatures up to +120ºC
• Size: 3-15
• Colour: Black
Code: 431422 Pair £78.95
TOECAP
WATER
RESISTANT
ANTISTATIC
SRC
TOECAP
WATER
RESISTANT
ANTISTATIC
SRC
uvex 1 Ladies Shoe
CONFORMS TO EN ISO 20345:2011 S2 SRC. ESD RATED
• Designed and produced specifically for the contours of the female foot.
Made with a female last
• Multi-purpose safety trainer
• 100% metal free
• Made with synthetic materials
• Elastic laces
• Outsole is resistant to temperatures up to +120ºC
• Size: 3-9
• Colour: Grey/Pink
Code: 431423 Pair £74.95
uvex 1 Ladies Perforated Shoe
CONFORMS TO EN ISO 20345:2011 S1 SRC. ESD RATED
• Designed and produced specifically for the contours of the female foot. Made
with a female last
• Multi-purpose safety trainer
• 100% metal free
• Made with synthetic materials
• Elastic laces
• Outsole is resistant to temperatures up to +120ºC
• Size: 3-9
• Colour: Grey/Pink
Code: 431424 Pair £74.95
89

TOECAP
Safety Footwear
Ladies Safety Boots & Shoes
ANTISTATIC
TOECAP
MIDSOLE SRA
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
Rock Fall VX600 Crystal Non-Metallic Ladies Safety
trainer with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRA
Lightweight and flexible design full grain leather uppers.
• Padded collar and tongue for comfort
• Moisture wicking breathable lining
• Anti-fatigue EVA comfort footbed
• Energy absorbing heel
• Durable rubber outsole for grip
• Composite toe cap and midsole for protection
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102054 Pair £54.99
Rock Fall VX530 Topaz Ladies Slip-On Safety Shoe with
Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Classic styling with elasticated sides for easy fitting.
• Padded collar and tongue for comfort
• Breathable quality leather upper
• Moisture wicking breathable lining
• Energy absorbing heel
• Dual density PU outsole for comfort and wear
• Steel toe cap and composite midsole for protection
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 143806 Pair £40.99
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
Rock Fall VX550 Diamond Ladies Slip-On Safety Court
Shoe with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Formal wedge style.
• Lightweight and flexible
• Breathable quality leather upper
• Anti-fatigue EVA comfort footbed
• Dual density anti-fatigue outsole
• Steel toe cap composite midsole combination
• Size: 2-8 (full sizes only)
• Colour: Black
Code: 195829 Pair £41.99
Rock Fall VX560 Sapphire Ladies Slip-On Safety Ballet
Pump with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Formal low heel Ballerina style.
• Super lightweight and flexible
• Breathable quality leather upper
• Anti-fatigue EVA comfort footbed
• Rubber diamond pattern outsole for grip
• Steel toe cap composite midsole combination
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102055 Pair £43.99
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
90
Pro-Man PM100 Chukka Boot with Steel Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3
• Dual density PU sole
• Black leather chukka boot
• Deep padded collar
• Water resistant
• Steel toe cap midsole
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 430475 Pair £19.12

Footwear Accessories
Insoles
uvex Thermal Insoles
• Breathable natural Cork footbed
• Effective ventialtion system
• Activated charcoal to prevent odour
• Anti-static. Non-allergic
• Optimal environment for the foot
Code: 170005 Pair £9.64
Cush ’N’ Step Insole
• 100% polyurethane foam
• Overlaid with soft latex layer
• Covered hard wearing polyester
• Washable at 40°C
• Size: 7-12 (full sizes only)
Code: 170002Pair £5.99
Safety Footwear
Safety Overshoe
UK SIZES
IMPACTO ® TURBOTOE
COLOUR SIZE GUIDE
Grey 4.5 - 5.5
White 6 - 7.5
Yellow 8 - 9.5
Red 10 - 11.5
Blue 12 - 13
Green 13 - 14
Impacto ® Turbotoe Safety Overshoe
Built-in 200 joule steel toe cap – fits over low-heel, dress and running shoes and most boots.
• Protects toe area from accidental impact, crushing or stubbing
• Easily cleaned and reusable
• Ideal for environments with risk of toe damage or has steel toe cap requirement
• Perfect for visitors, casual or temporary workers, management, clerical, sales people
• Colours vary according to UK sizes (see table)
• Size: 4.5 – 14
Code: 170020Pair £31.99
Kiwi Shoe/Boot Polish
• Cartons of 12
• Size: 100ml
• Colour: Black
Code: 508607Each £2.49
Tuf Revolution Heavyweight Twin
Pack Socks
• Elasticated reinforced rib
• Internal Comfort Zone
• Extra padded toe & heel support
Code: 364033 Pack of 2 Pairs £7.99
Endurance Thermal Seaboot
Stockings
• 54cm (21") seaboot hose
• Ultra warm
• 50% artificial fibre, 50% wool
• Colour: White
Code: 364026Pair £4.99
Shoe and Helmet Sanitiser Spray
Combines sanitising and air freshening properties.
• For all kinds of multipurpose use on footwear/
headgear
• For bowling alleys, sports halls, ice rinks
• Size: 480ml
• Cartons of 12
Code: 508454Each £4.99
91

Respiratory Protection
Buying Guide
Selecting the correct protection
The selection of Respiratory Protection follows a basic four-step method:
• Identify the hazards – dust, metal fume, gas, vapour
• Assess the hazards – assess the hazard level/other protection – skin and eye
• Select the proper respirator – disposable, half mask, full face, powered, airline
• Training in fitting and use – to optimise respiratory protection
FILTER MARKINGS
For use
against
Gas and
Vapour
(EN 14387
and
EN 405)
Particles
(EN 143
and EN 149)
Filter Colour
Type Code Main Applications
A Brown
Organic Vapours with boiling point greater
than 65˚C and good warning properties
B Grey
Inorganic gases and vapours, E.g. Chlorine
(not Carbon Monoxide)
E Yellow
Acid gases and vapours, E.g. Sulphur Dioxide,
Hydrogen Chloride
K Green Ammonia and organic ammonia derivatives
P White Particulate
Hg Pink Mercury Vapour
AX
Brown
Dusts
Produced when solid
materials are broken down
into finer particles, the
longer the dust remains in
the air the easier it is to
inhale.
Mists
Tiny liquid droplets
formed by atomisation
and condensation
processes such as
spraying. Mists are often
combinations of several
hazardous ingredients.
Metal fumes
Occur when metals are
vaporised under high
heat. The vapour is cooled
quickly and condenses
into very fine particles
that float in the air.
Respiratory Terminology
Certain organic compounds with boiling points
less than 65°C & good warning properties
P1 White Protection against particulates
P2 White Protection against particulates
P3 White Protection against particulates
S White Solid
L White Liquid
Gases
Airborne at room temperature.
Able to diffuse or spread freely,
can travel very far very quickly.
Vapours
Gaseous state of substances
that are liquids or solids at
room temperature. Formed
when substances evaporate
in the way water vapour
evaporates from water.
Workplace Exposure Limit (WEL)
Airborne concentration of a Hazardous Substance, averaged over a specified time period referred to as a Time
Weighted Average (TWA).
WEL Time Periods
There are two reference periods for which WELS may be set; 8 hour Time Weighted Average (TWA) and 15 minute Short
Term Exposure Limit (STEL). A substance may be assigned WELS at either one or both reference periods.
8 hour TWA – some adverse health effects can occur after prolonged or accumulated exposure. The 8 hour TWA is set
to restrict the total intake by inhalation over one or more shifts.
15 minute STEL – Some adverse health effects may be seen after short exposures. 15 minute STEL may be applied to
control these effects.
Health & Safety
Legislation Update
Amended Standard
EN 149:2001+A1:2009
EN 149:2001 was superseded by an
amended version, EN 149:2001+A1:2009
(EN 149+A1) in July 2009. Changes
included the introduction of two usability
classifications for disposable respirators;
single shift only devices non-reusable
(shown through marking “NR”) and reusable
devices (marked ‘R’).
The amended European Standard EN
149:2001+A1:2009 states that all reusable
devices (marked ‘R’) must withstand
being cleaned and disinfected using a
method provided by the manufacturer.
This change, along with new performance
requirements, is intended to give the user
further confidence in respirators providing
continuous respiratory protection in
hazardous environments.
All particle filtering half masks featured fully
conform to EN 149:2001+A1:2009
Disposable respirators that have passed the
optional Dolomite clogging test have a
suffix ‘D’ listed in their conformity standards.
European Standards
Respirators are tested to the relevant
European Standards and CE marked. All
respirators carry the CE mark plus the
European Standard and performance
category markings.
EN 149 – Filtering face piece and
particulate respirators
EN 405 – Valved filtering half mask
respirators for gases and/or
particulates
EN 140
EN 136
EN 137
EN 143
EN 146
EN 147
EN 270
EN 402
EN 529
EN 1146
EN 1835
EN 12941
EN 12942
EN 14387
– Half mask face pieces
– Full face pieces
– Self-contained open-circuit
compressed air breathing
apparatus
– Particulate filters
– Powered respirators – hoods &
helmets
– Powered – full face masks
– Heavy duty supplied air
– Escape Apparatus. SCBA with
full face mask or mouthpiece
assembly
– Respiratory selection,
use and care
– Compressed air escape
apparatus with hood
– Light duty supplied air
– Powered respirators – hoods
and helmets
– Powered respirator
Full face masks
– Gas & vapour filters
Immediately Dangerous to Life or Health (IDLH)
The IDLH concentration of a substance is defined as “that which poses a threat of exposure to airborne contaminants
when that exposure is likely to cause death or immediate or delayed permanent adverse health effects or prevent
escape from such an environment”. The IDLH value represents a maximum concentration from which a worker would
escape within 30 minutes without any impairing symptoms or irreversible health effects.
92

93

Respiratory Protection
Disposable Particulate Respirators
FFP1 Valved Respirators
Protection Factor: APF 4
Typical Applications: Low levels (up to 4 x WEL) of fine dust and oil or water-based mists typically found during hand sanding, drilling
and cutting. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009.
Dräger X-plore ® 1310V Moulded Respirator
• Pre-formed respirator offering comfort and secure fitting
• Provides protection against fine dust, solid and liquid particles
• Assigned Protection Factor = 4
Code: 431085 Box of 10 £20.10
(=£2.01 each)
3M 8812 Cup-Shaped Valved Dust/Mist Respirator
• Protection against fine respirable dusts
• 3M Cool Flow valve
• Assigned Protection Factor = 4
Code: 292409 Box of 10 £15.49
(=£1.55 each)
Respair Economy P1 Valved Respirator
• Cost effective
• Excellent comfort and protection
• Protects against solid & liquids particles including oil based mists
• Assigned Protection Factor = 4
Code: 430163 Box of 10 £10.28
(=£1.03 each)
3M Aura 9312+ Flat-Fold Valved Dust/Mist Respirator
• 3M Cool Flow valve
• Unique 3-panel design, soft cover web for comfort and excellent fit
• Individually packed, flat-fold
• Assigned Protection Factor = 4
Code: 292744 Box of 10 £19.99
(=£2.00 each)
94
Dräger X-plore ® 1710V Fold Flat Respirator
• Fold flat respirator offering comfort and secure fitting
• Provides protection against fine dust, solid and liquid particles
• CoolMAX exhalation valve offering easy breathing and comfort
• Assigned Protection Factor = 4
Code: 431092 Box of 10 £19.00
(=£1.90 each)
Respair P1 Fold Flat Valved Disposable Respirator
• Lightweight multi layered filter medium combining electrostatic charge
• Unique 3-panel design, soft cover web for comfort and excellent fit
• Individually packed, flat-fold
• Assigned Protection Factor = 4
Code: 430164 Box of 10 £16.93
(=£1.69 each)

Disposable Particulate Respirators
FFP1 Cup-Shaped Unvalved Respirators
A range of reliable quality disposable respirators designed to protect the wearer against solid aerosols, dust, mists, powders and
accompanying odours. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009.
Keep Safe Cup-Shaped Respirator
• Protection against fine non-toxic dusts, fumes
• Suitable for dusts generated from construction, brick, clay, sanding
• Agricultural uses - animal feeds, grain, hay, pollen
• Assigned Protection Factor = 4
Code: 282457 Box of 20 £14.99
(=£0.75 each)
Respair Economy P1 Unvalved Respirator
• Cost effective product range that’s been developed for use when economy is a
main concern
• Produced to a high standards and ensures the wearer excellent comfort and
protection
• Protects against solid and liquid particles including oil base mists
• Assigned Protection Factor = 4
Code: 430807 Box of 20 £12.85
(=£0.64 each)
Respiratory Protection
Moldex 2360 Classic Series FFP1
Non-valved Respirator
Suited to most industrial applications - Extremely
durable & comfortable
• DuraMesh ® for optimum shape retention and
durability
• ActivForm ® automatically adjusts to different face
shapes
• Loop strap for easy application
Code: 290018 Box of 20 £22.39
(=£1.12 each)
3M 8710E Cup-Shaped Dust/Mist
Respirator
• Protection against fine respirable dusts
• Assigned Protection Factor = 4
Code: 292452 Box of 20 £18.99
(=£0.95 each)
Dräger X-plore ® 1310 Moulded
Respirator
• Pre-formed respirator offering comfort and secure
fitting
• Provides protection against fine dust, solid and liquid
particles
• Assigned Protection Factor = 4
Code: 431084 Box of 20 £23.00
(=£1.15 each)
FFP1 Flat Fold Unvalved Respirators
3M Aura 9310+ Flat-Fold Dust/
Mist Respirator
• Protection against fine respirable dusts
• Unique 3-panel design, soft cover web for
comfort and excellent fit
• Individually packed, flat-fold
• Assigned Protection Factor = 4
Code: 292743 Box of 20 £24.99
(=£1.25 each
Respair P1 Fold Flat Disposable
Respirator
• Lightweight multi-layered filter medium combining
electrostatic charge
• Unique filter material provides extremely low
breathing resistance
• Individually packed, flat-fold
• Assigned Protection Factor = 4
Code: 430801 Box of 20 £21.32
(=£1.07 each)
Dräger X-plore ® 1710 Fold Flat
Respirator
• Protection against fine respirable dusts
• Unique 3-panel design, soft cover web for
comfort and excellent fit
• Individually packed, flat-fold
• Assigned Protection Factor = 4
Code: 431091 Box of 20 £21.80
(=£1.09 each)
95

Respiratory Protection
Disposable Particulate Respirators
FFP2 Fold Flat Respirators
uvex silv-Air 3210
• FFP 2 folding mask with valve.
• Large exhalation valve for easy air flow exchange reduces heat and moisture
build-up inside the mask
• Innovative nose shape design contours to any facial shape
• High quality materials prevent mask from collapsing during breathing
• Seamless, cotton headband for pressure free fit, absorbs sweat
• Soft material edges - high comfort, no sharp irritating edges
Code: 292792 Box of 15 £27.00
(=£1.80 each)
3M Aura 9322+ Flat-Fold Valved Dust/Mist
Respirator
• 3M Cool Flow valve
• Individually packed flat fold respirator
• Assigned Protection Factor = 10
Code: 292746 Box of 10 £29.99
(=£3.00 each)
Dräger X-Plore ® 1720 FFP2 Fold Flat Respirator
CONFORMS TO EN149:2001 + A1:2009 FFP2 NR D
• Fold flat respirator offering comfort and secure fitting
• Provides protection against fine dust and solid and liquid particles which are
found in construction, manufacturing, agricultural and service industries
• Assigned Protection Factor = 10
Code: 431093
Unvalved Box of 20 £40.00 (=£2.00 each)
Code: 431094
Valved Box of 10 £28.70 (=£2.87 each)
FFP2 Cup Shaped Respirators
Moldex AIR Series Valved Respirator
96
3M 8322 Cup-Shaped Valved Dust/
Mist Respirator
• Protection against fine dusts, water- and oil-based
mists
• 3M Cool Flow valve
• Cushioned lining, braided headbands, M-noseclip
offer extra comfort
• Assigned Protection Factor = 10
Code: 292417 Box of 10 £26.99
(=£2.70 each)
Extremely low breathing resistance for extra comfort
and mask durability
• Low breathing resistance due to Moldex Pleated
Filter Technology
• DuraMesh ® for optimum shape retention and
durability
• ActivForm ® automatically adjusts to different face
shapes
• Ventex ® - valve reduces moisture and heat inside
the mask
3155 - Small
Code: 431275 Box of 10 £30.63
(=£3.06 each)
3105 - Medium/Large
Code: 431274 Box of 10 £30.63
(=£3.06 each)
GVS 2010 FFP2 Disposable Mask Ref:
DME2010UB00
• FFP2 disposable mask for protection against dusts
• Moulded fit
• Easy to adjust straps
Code: 431550 Box of 20 £17.40
(=£0.87 each)

Disposable Particulate Respirators
FFP2 Cup Shaped Respirators
uvex silv-Air 2210
• FFP 2 preformed mask with valve.
• Large exhalation valve for easy air flow exchange
reduces heat and moisture build-up inside the mask
• Innovative nose shape design contours to any facial
shape
• High quality materials prevent mask from collapsing
during breathing
• Seamless, cotton headband for pressure free fit,
absorbs sweat
• Soft material edges - high comfort, no sharp
irritating edges
Code: 431435 Box of 15 £28.80
(=£1.92 each)
Respair E Economy Respirator
• Cost effective product range, developed for use
where economy is a main concern
• Produced to a high standard to ensures the wearer
excellent comfort and protection
• Protects against hazardous dusts & fine dust
particles
• Assigned Protection Factor = 10
Code: 430809 Box of 10 £12.32
(=£1.23 each)
Dräger X-Plore ® 1320 FFP2 Moulded
Respirator
CONFORMS TO EN149:2001 + A1:2009 FFP2 NR D
• Preformed respirator offering comfort and secure
fitting
• Provides protection against fine dust and solid and
liquid particles which are found in construction,
manufacturing, agricultural and service industries
• Assigned Protection Factor = 10
Code: 431086 Box of 20 £46.00 (=£2.30 each)
Code: 431087
Box of 10 £30.20 (=£3.02 each)
Respiratory Protection
Keep Safe Flexinet 3D Cup-Shaped
Valved Respirator
• Protection against fine dust, water- and oil-based
mists and fumes
• Suitable for DIY, some manufacturing processes,
refinishing and wood working
• Assigned Protection Factor = 10
Code: 282486 Box of 10 £25.25
(=£2.52 each)
Keep Safe Cup-Shaped Valved
Respirator
• Suitable for use as FFP2 (S) for protection against
fine toxic dusts, fibres, aqueous mists
• Additional protection – oil-based mists or aerosols
present when using cutting oils/lubricants
• Exhalation valve lessens heat build-up
• Assigned Protection Factor = 10
Code: 282565 Box of 10 £16.49
(=£1.64 each)
3M 8822 Cup-Shaped Valved Dust/
Mist Respirator
• Protection against fine dusts, water-and oil-based
mists
• 3M Cool Flow valve
• Convex shape helps reduce heat
• Comfortable protection, particularly in hot/humid
conditions
• Assigned Protection Factor = 10
Code: 292410 Box of 10 £22.49
(=£2.25 each)
Respair Cup-shaped Valved Respirator
• Protects against hazardous dusts & fine particles
• Assigned Protection Factor = 10
Code: 430806 Box of 10 £26.57
(=£2.66 each)
GVS 2011 FFP2V Disposable Mask Ref: DME2011UB00
• FFP2 disposable mask for protection against dusts
• Moulded fit
• Easy to adjust straps
• Non return inhalation valve to offer lower breathing resistance
• Traffic light colour valve system
Code: 431551 Box of 15 £14.85
(=£0.99 each)
97

Respiratory Protection
Disposable Particulate Respirators
FFP3 Valved Respirators
Protection Factor: APF 20
Typical Applications: Higher levels of fine dust (up to 20 x WEL) and oil or water based mists typically found when handling
hazardous powders in the pharmaceutical industry or work with biological agents and fibres. All particle filtering half masks
featured fully conform to EN 149:2001+A1:2009.
FFP3 Cup Shaped Valved Respirators
uvex silv-Air 2310
FFP 3 preformed mask with valve. Standard Size
• Large exhalation valve for easy air flow exchange reduces heat and moisture
build-up inside the mask
• Innovative nose shape design contours to any facial shape
• High quality materials prevent mask from collapsing during breathing
• Seamless, cotton headband for pressure free fit, absorbs sweat
• Soft material edges - high comfort, no sharp irritating edges
Code: 292791 Box of 15 £58.65
(=£3.91 each)
uvex silv-Air 2312
FFP 3 preformed mask with valve. Smaller cup size suitable for those with
narrower faces.
• Large exhalation valve for easy air flow exchange reduces heat and moisture
build-up inside the mask
• Innovative nose shape design contours to any facial shape
• High quality materials prevent mask from collapsing during breathing
• Seamless, cotton headband for pressure free fit, absorbs sweat
• Soft material edges - high comfort, no sharp irritating edges
Code: 431437 Box of 15 £58.65
(=£3.91 each)
98
125
3M 8835 Valved Soft Seal Dust/Mist/Metal Fume
Respirator
• Protection against fine dusts, metal fume, oil and water-based mists
• 3M Cool Flow valve
• Soft sealing ring, adjustable straps - comfortable and confident fit
• Cleanable sealing ring, additional testing – use for more than one shift
• Assigned Protection Factor = 20
Code: 292495 Box of 5 £30.49
(=£6.10 each)
Keep Safe Cup-Shaped Valved Respirator
• Protection against very fine toxic dusts, fibres, aqueous mists, oil mists, welding
fumes (not Nitrate gases), microbiological hazards
• For use in pharmaceutical, iron, steel and construction industries
• Exhalation valve - lessens heat build-up with a greater comfort
• Assigned Protection Factor = 20
Code: 282561 Box of 5 £17.99
(=£3.60 each)

Disposable Particulate Respirators
Moldex 2555 Classic Series Valved Respirator
Suited to most industrial applications - Extremely durable & comfortable
• DuraMesh ® for optimum shape retention and durability
• ActivForm ® automatically adjusts to different face shapes
• Ventex ® -valve reduces moisture and heat inside the mask
Code: 290049 Box of 20 £99.76
(=£4.99 each)
Moldex AIR Series Valved Respirator
Extremely low breathing resistance for extra comfort and mask durability
• Low breathing resistance due to Moldex Pleated Filter Technology
• Individually bagged
• Nose seal increases fit & comfort
• Ventex ® -valve reduces moisture and heat inside the mask
3255 - Small
Code: 431277 Box of 10 £62.15
(=£6.21 each)
3205 - Medium/Large
Code: 431276 Box of 10 £62.15
(=£6.21 each)
Respiratory Protection
3M 8833 Cup-Shaped Valved Dust/
Mist/Metal Fume Respirator
• Reliable, effective protection against fine
particulates
• 3M Cool Flow valve
• Soft inner face-seal ring - secure face fit, increases
wearer comfort
• Cleanable sealing ring, additional testing – use for
more than one shift
• Assigned Protection Factor = 20
Code: 292498 Box of 10 £42.49
(=£4.25 each)
Dräger X-plore ® 1330V Valved
Moulded Respirator
• Preformed respirator with the added benefit of
CoolMAX exhalation valve
• Provides protection against fine dust, solid and
liquid particles which are found in construction,
manufacturing, agricultural and service industries
• Assigned Protection Factor = 20
Code: 431089 Box of 5 £35.55
(=£7.11 each)
Respair E P3V Economy Valved
Respirator
• Toxic dusts & fine dust particles
• Assigned Protection Factor = 20
Code: 430810 Box of 5 £16.60
(=£3.32 each)
Respair C P3V Valved Cup Respirator
• Toxic dusts & fine dust particles
• Assigned Protection Factor = 20
Code: 430165 Box of 5 £25.91
(=£5.18 each)
GVS 3021 FFP3V Disposable Mask Ref: DME3021UB00
• FFP3 disposable mask for protection against dusts (asbestos, silica etc)
• Moulded fit
• Easy to adjust straps
• Non return inhalation valve to offer lower breathing resistance
• Traffic light colour valve system
Code: 431552 Box of 10 £19.60
(=£1.96 each)
99

Respiratory Protection
Disposable Particulate Respirators
FFP3 Flat Fold Valved Respirators
uvex silv-Air 3310
FFP 3 folding mask with valve.
• Large exhalation valve for easy air flow exchange reduces heat and moisture
build-up inside the mask
• Innovative nose shape design contours to any facial shape
• High quality materials prevent mask from collapsing during breathing
• Seamless, cotton headband for pressure free fit, absorbs sweat
• Soft material edges - high comfort, no sharp irritating edges
Code: 431436 Box of 15 £55.50
(=£3.70 each)
Keep Safe Flat-Fold Valved Respirator
• Protection against very fine toxic dusts, fibres, aqueous mists, oil mists, welding
fumes (not Nitrate gases) and microbiological hazards
• For use in pharmaceutical, iron, steel, construction industries
• Exhalation valve lessens heat build-up (staple free)
• Assigned Protection Factor = 20
Code: 282458 Box of 10 £38.99
(=£3.90 each)
Dräger X-plore ® 1730V Fold Flat Valved Respirator
• Fold flat respirator with the added benefit of the CoolMax exhalation valve
• Easy breathing, comfort and secure fitting
• Provides protection against fine dust, Solid and Liquid particles which can be
found in construction, manufacturing, agricultural and service industries
• Assigned Protection Factor = 20
Code: 431096 Box of 10 £60.00
(=£6.00 each)
Respair P3V Fold Flat Respirator
• Vertically folded and individually wrapped
• Lightweight
• Protects against toxic dusts & fine particles
• Assigned Protection Factor = 20
Code: 430805 Box of 10 £37.05
( =£3.71 each)
FFP3 Non-Valved Respirators
100
100
3M Aura 9332+ Flat-Fold Valved Dust/Mist/Metal
Fume Respirator
• Unique 3-panel design, soft cover web - for comfort and excellent fit
• 3M Cool Flow valve
• Individually packed, flat fold
• Assigned Protection Factor = 20
Code: 292747 Box of 10 £55.99
(=£5.60 each)
Moldex AIR Series
Non-Valved Respirator
• Low breathing resistance due to
Moldex Pleated Filter Technology
• Medically approved Type llR
• Latex & PVC Free
• Individually bagged
• Size: Small
Code: 431273 Box of 10 £54.17
(=£5.41 each)
• Size: Medium/Large
Code: 431272 Box of 10 £54.17
(=£5.41 each)

Particulate & Speciality Respirators
Moldex 3405 Air Re-useable Valved Respirator
Re-useable FFP3 Mask - Suited to most industrial applications
• DuraMesh ® for optimum shape retention and durability
• ActiveForm ® automatically adjusts to different face shapes
• Ventex ® valve reduces moisture and heat inside the mask
• Washable full face seal
• Low breathing resistance due to Moldex Pleated Filter Technology
Code: 290015 Box of 5 £37.08
(=£7.42 each)
Welding Fume Respirators
GVS 3031 FFP3V Re-Usable Mask Ref: DME3031UB00
• FFP3 Re-Usable mask for protection against dusts (asbestos, silica etc)
• Moulded fit
• Easy to adjust straps
• Non return inhalation valve to offer lower breathing resistance
• Traffic light colour valve system
Code: 431553 Box of 5 £12.35
(=£2.47 each)
Respiratory Protection
3M 9922 Valved Particulate/Nuisance Level Organic
Vapour Relief Respirator
Conforms to EN 149:2001 FFP2 NR D
• Protection against fine dusts, oil- and water-based mists, welding respiratory
hazards (i.e. Fumes, ozone)
• Relief from unpleasant odours plus nuisance levels of organic vapours from
solvents, degrease, resins
• 3M Cool Flow valve
• For woodworking, foundry operations, waste management, lab settings,
agriculture, petrochemical, welding
• Assigned Protection Factor = 10
Code: 292493 Box of 10 £41.99
(=£4.20 each)
3M 9928 Valved Soft Seal Welding Fume Respirator
Conforms to EN 149:2001 FFP2 R D
• Protection against oil/water-based mists, fine dusts, metal fumes and ozone
• 3M Cool Flow valve
• Soft inner face seal ring can be wiped clean - for more than one shift
• Assigned Protection Factor = 10
Code: 290567 Box of 10 £52.49
(=£5.25 each)
3M 9913 Dust/Mist Nuisance Odour Respirator
Conforms to EN 149:2001 FFP1 NR D
• Protection against fine dusts, unpleasant smells, nuisance levels of organic
vapours
• Lightweight, comfortable
• Convex shape, twin-strap, nose-clip
• Good conformance to most face shapes and sizes
• Assigned Protection Factor = 4
• Below WEL for organic vapours
Code: 290001 Box of 20 £68.99
(=£3.45 each)
Respair Welding P2V Fold Flat Respirator
Conforms to EN 149:2001 + A1:2009 (nr)
• Welding fumes/nuisance levels of ozone gas
• Assigned Protection Factor = 10
Code: 430802 Box of 10 £40.48
(=£4.05 each)
101

Respiratory Protection
Disposable Half Masks
Moldex compact disposable half mask respirator
Conforms to EN140 and EN14387
• Extremely lightweight and comfortable
• Quick and simple fit check
• One size fits all
• Excellent field of vision
• Packaged in a re-sealable bag
• Low breathing resistance due to Moldex Pleated Filter Technology
5120 FF A1 P2 R D - Organic gas (Bp > 65˚C) particulates
Code: 431267 Box of 1 £21.03
5230 - FF A2 P3 R D - Organic gas (Bp > 65˚C) particulates
Code: 431268 Box of 1 £24.85
5430 - FF ABEK1 P3 R D - Organic inorganic acidgases and ammonia (Bp > 65˚C)
particulates
Code: 431269 Box of 1 £31.56
Reusable Respirators - Half Masks
GVS Elipse half mask respirator
with Ready Fitted P3 filters
Conforms to EN 140:1998 and EN 143:2000. APF:20
Perfect for everyday use in construction and utilities through to the more
demanding environments of metalworking, welding & stonemasonry
• Elipse twin filter ready to wear half mask
• Latex and silicone free, lightweight TPE face piece that is comfortable to wear for
long periods of time
• Low profile filters provide unstructured field of vision
• Suitable against Silica Dust
• Weighs less than 135g with filters
• Sizes: S/M, M/L
Code: 292261Each £17.49
GVS Elipse P3 Construction
Dust Replacement Filters
Code: 292262 Pack of 2 £6.99
GVS Elipse half mask respirator
with Ready Fitted a1-p3 filters
Conforms to EN 140:1998 and EN 14387:2004. With P3 APF:20
Designed to protect against solid and liquid particles such as dusts and mists,
along with vapours and organic gases. Used in a variety of workplace applications
including petrochemical, chemical manufacturing, construction, transportation,
paint spraying and solvents
• Elipse twin filter, ready to wear half mask
• Latex and silicone free, lightweight TPE face piece that is comfortable to wear for
long periods of time
• Low profile filters provide unobstructed field of vision
• Sizes: S/M, M/L
Code: 292263Each £23.99
GVS Elipse A1-P3
Organic Gases & Vapours
Replacement Filters
Code: 292264 Pack of 2 £11.99
102
102

Reusable Respirators - Half Masks
Respiratory Protection
GVS Elipse Integra Half Mask Respirator
with Ready Fittted P3 Filters
Conforms to EN 140: 1998 and EN 143: 2000 APF200
• Integrated safety goggle with respirator in one complete unit
• When fitted correctly, the goggle cannot steam
• K & N anti-mist and anti-scratch coatings as standard
• Ready to use with filters already applied
• Manufactured in the UK
• Available in S/M and M/L
Code: 292259Each £33.36
GVS Elipse P3 Construction Dust Replacement Filters
Conforms to EN143
• Offering a minumum 99.95% protection against airborne particles
Code: 292262 Pack of 2 £6.99
GVS Elipse A2P3 Half Mask
Conforms to EN140 and EN14387
• Half mask respirator ready fitted with A2P3 filters for protection against Organic
vapours, dusts, mists and fumes
• Compact and lightweight
• Manufactured in UK
• Extremely low breathing resistance
• Available in S/M and M/L
Code: 431529Each £24.85
GVS Elipse Replacement A2P3 Filters
Conforms to EN14387
Code: 431530 Pack of 2 £13.26
GVS Elipse ABEK1P3 Half Mask
Conforms to EN140 and EN14387
• Half mask respirator ready fitted with ABEK1P3 filters for protection against
vapours, ammonia, acid gases, dusts, mists and fumes.
• Compact and lightweight
• Manufactured in UK
• Extremely low breathing resistance
• Available in S/M and M/L
Code: 431532Each £26.90
GVS Elipse Replacement ABEK1P3 Filters for protection
against vapours, ammonia, acid gases, dusts, mists and
fumes
Conforms to EN14387
Code: 431533 Pack of 2 £15.31
GVS Elipse Integra A1-P3 RD Mask
Conforms to EN166, EN140 and EN14387
• Integrated safety goggle with respirator in one complete unit
• When fitted correctly, the goggle cannot steam
• Anti-mist and anti-scratch coatings as standard
• Ready to use with A1-P3 filters already applied
• Manufactured in the UK
• Available in S/M and M/L
Code: 431535Each £43.37
GVS Elispe Replacement A1-P3 RD Filters
Conforms to EN14387
• Offering protection against organic vapour and airborne particulates
Code: 292264 Pack of 2 £11.99
103

Respiratory Protection
Reusable Respirators - Half Masks
ALL CONFORM TO EN 140
3M Reusable Half Mask Respirator Kit RTU7523M
Conforms to EN 140
• 3M 7502 medium half mask with a2p3R filters
• Soft silicone face piece for comfort and durability
• Balanced, secure fit
• Low maintenance for maximum convenience
• Replaceable filters - See page 110
Code: 292601Each £34.99
104
104
Scott Safety Profile 60 Half Mask Respirator
Conforms to EN 140
• Soft, comfortable silicone face piece
• Ergonomically designed
• Provides respiratory protection in a wide variety of applications
• Hygienic storage bag included
• Highly efficient fit
• Supplied without filters - See page 111
• Size: S-M, M-L
Code: 292526Each £23.49
3M 7500 Series Half Mask Respirator
Conforms To EN 140
Ultimate in comfort and advanced technology.
• Breakthrough in half mask comfort and fit
• Very pliable face seal – exceptional comfort and fit
• Innovative exhalation valve – decreases breathing resistance
• Silicone mask
• Supplied without filters - See page 110
3M 7502
Size: Medium
Code: 292606 Each £23.49
3M 7503
Size: Large
Code: 292607 Each £23.49

Reusable Respirators - Half Masks
ALL CONFORM TO EN 140
Respiratory Protection
3M 6500 Series Reusable Half Mask Respirator
Conforms to EN 140
Long-lasting stability & durability. Rugged comfort.
• Adjustable head harness assembly
• Quick latch drop down mechanism
• Low profile, easy maintenance design
• Silicone face seal
• 3M Cool-Flow valve provides a cooler, more comfortable wear
• Supplied without filters - See page 110
• Size: M, L
Code: 292603Each £17.99
3M 6000 Series Half Mask Respirator
Conforms To EN 140
Classic, lightweight, industry standard. Dependable lightweight value.
• Combines good protection with economy in use
• Low maintenance (only selected spares available)
• Supplied without filters - See page 110
3M 6200M
Size: Medium
Code: 292630Each £13.49
3M 6300L
Size: Large
Code: 292631Each £13.49
Scott Safety Profile2 Half Mask Respirator
Conforms to EN 140
• Perfectly balanced – combines comfort, protection
• Latex and silicone-free – no allergic skin reaction, irritation
• Head harness, neck buckle – supports without tightness in straps
• Spark, splash and contaminant guards for filters and exhale valve
• Low through life costs
• Supplied without filters - See page 111
• Size: S, M, L
Code: 292506 Each £11.49
Moldex 7000 Series Reusable Half Mask Respirator
Conforms to EN 140
Extremely lightweight and comfortable.
• Use with EASYLOCK Filters - which require no additional clips or holders
• Mask body is gentle to the skin
• Low profile design for excellent field of vision
• Easy to clean & maintain
• Supplied without filters - See page 111
• Size: S, M, L
Code: 292304Each £19.99
105

Respiratory Protection
Reusable Respirators – Half Masks
3M 4000 Series Maintenance-Free
Reusable Respirators
The 4000 Series is a range of ready-to-use, maintenance-free half masks
designed for effective and comfortable protection against a combination
of many gases, vapours and particulate hazards found throughout industry.
Utilising unique filter technology enables a very low-profile design for
undisturbed field of vision to make your work life more comfortable.
Convenience Respirators
Features and Benefits:
Facepiece
Low profile design for better peripheral vision
Lightweight, well balanced design
Soft, non-allergenic material with textured face seal
Built-In Filters
Four versions available, each offering protection against
different hazards found throughout industry
One piece, maintenance-free construction
Exhalation Valve
Central position for effective removal of heat and moisture
build-up within face piece
Adjustable Head Cradle and Neck Straps
Stable secure fit
Easy to fasten neck strap
Where the respirator is used for more than one
shift, and disposed of within a month, record
keeping is not required under CoSHH. The only
maintenance, apart from daily visual inspection,
is the cleaning of the face seal for hygiene
requirements. For advice on current selection of
3M respiratory protective equipment please get
in touch.
4251 4255 4277 4279
3M 4000 REUSABLE RESPIRATORS
CONFORMS TO EN405:2001
PROTECTION AGAINST:
3M
CODE
DESCRIPTION
PROTECTION
GASES/
VAPOURS
PROTECTION
LEVEL
ORGANIC
GASES/
VAPOURS
INORGANIC
GASES/
VAPOURS
ACID
GAS
AMMONIA
PARTICULATES:
FFP2: 10×WEL
(water and oil
based)
PARTICULATES:
FFP3: 20×WEL
(water and oil
based)
TYPICAL APPLICATIONS CODE EACH
4251
Organic vapour/
particulate
respirator
A1
P2
10×WEL or
1000ppm
(whichever is
the lowest)
General paint spraying/
Adhesive spraying/Creosoting/
Solvent spraying/Paint stripping/
Boat building/Vehicle Manufacturing
292484 £17.49
4255
Organic vapour/
particulate
respirator
A2
P3
10×WEL or
5000ppm
(whichever is
the lowest)
General paint spraying/Adhesive spraying/
Mixing agricultural chemicals/Creosoting/
Solvent spraying/Paint Stripping/
Boat building/Aerospace Manufacturing/
Vehicle Manufacturing
292435 £20.99
4277
Organic vapour/
Inorganic and acid
A1
gas particulate
B1 E1 P3
respirator
10×WEL or
1000ppm
(whichever is
the lowest)
Burn stripping for paint removal/
Electro-plating/Grinding/ Polishing/
Finishing cured epoxy resins/
Metal Pickling/Metal etching/Acid cleaning
292406 £23.99
106
106
4279
Organic vapour/
Inorganic, acid
gas and ammonia A1 B1 E1 K1 P3
particulate
respirator
10×WEL or
1000ppm
(whichever is
the lowest)
Burn stripping for paint removal/
Using ammonia solutions/Agrochemicals/
Manufacture and maintenance of
refrigeration equipment
290511 £26.99

Reusable Respirator Half Masks & Full Masks
Dräger X-plore ® 3500 Construction
Set Respirator + P3 Filters
HALF MASK CONFORMS TO EN 140
Ideal kit for many construction related activities. Built
around the X-plore ® 3500 half face respirator.
• Robust, comfortable and suitable for demanding
work areas
• FlexiFit head cradle which can be worn under
safety helmets
• Includes two P3 Particulate filters
Code: 431104 Each £32.38
Full Face Mask
Dräger x-plore ® 5500 full
face respirator
• Double layer face seal with triple sealing action ensuring reliable secure leakfree
protection
• Swept back low-profile filter position
• Distortion free, polycarbonate impact resistant lens
• Easily adjustable head harness for secure and balanced fit
Code: 431110 Each £108.54
Dräger X-plore ® 3300 Painter Set
Respirator + A2 P3 Filters
HALF MASK CONFORMS TO EN 140
Ideal kit for many painting activities. Built around
the X-plore ® 3300 low maintenance, economical half
face respirator.
• Lightweight, extremely comfortable and friendly
to the skin
• FlexiFit head cradle which can be worn under
safety helmets
• Includes two A2 P3 Organic Gas/Vapour/
Particulate filters
Code: 431103 Each £33.30
Dräger X-plore ® 3300 Chemical Set
Respirator + A1B1E1K1HGP3
HALF MASK CONFORMS TO EN 140 FILTERS & EN 14387
Ideal kit for use in many chemical industry related
activities. Built around the X-plore ® 3300 low
maintenance, economical half mask.
• Lightweight, extremely comfortable and friendly
to the skin
• FlexiFit head cradle which can be worn under
safety helmets
• Includes two A1 B1 EK1 HG P3 Orgain, inorganic
and acid gases & vapours, Ammonia, Mercury
Vapour and Particulate combination filters
Code: 431099 Each £33.92
Respiratory Protection
MAIN FEATURES
• Double layer face seal
• Low profile filter position
• Wide angle lens
• Easily adjustable head harness
• Triple sealing action
Dräger Spare Filters
TO FIT DRÄGER X-PLORE ® 3300/3500 HALF MASK AND 5500 FULL FACE RESPIRATOR
CONFORMS TO EN 143:2000/A1 AND/OR EN 14387
Type & Colour
Code
A2
P3
P3
A1 B1 E1
K1 Hg P3
Application Code Each
X-plore ® bayonet fit particulate filter. 431050 £10.99 (Pack of 2)
X-plore ® bayonet fir Organic Gas, Vapour and
particulate combination filter
X-plore ® bayonet fit Organic, Inorganic and acid
gases and vapours, Ammonia, Mercury Vapour and
Particulate combination filter
431030 £6.79
431026 £7.29
107

Respiratory Protection
Reusable Respirator Full Face Masks
ALL CONFORM TO EN 136
Scott Safety Vision 2 Full Face Respirator
• Unique visor – almost unrestricted, optically perfect vision
• Fully maintainable
• High performance
• Liquid silicone rubber faceseal – non-dermatitic
• Supplied without filters - see page 111
• Extremely soft/comfortable
Code: 290136 Each £136.99
Moldex 9000 Series Full Face Respirator
• Use with EASYLOCK Filters - which require no additional clips or holders
• Panoramic lens with excellent Periphery Vision
• Lightweight
• Easy to clean & maintain
• Mask body is gentle to the skin
• Supplied without filters - see page 111
• Size: S, M, L
Code: 431278 Each £95.94
108
108
3M 6000 Series Class 1 Full Face Respirator
• Class 1 full face mask
• Protection against respiratory hazards plus eye and face protection
• Eye impact protection (medium energy) EN 166 B
• Excellent field of vision
• Maximum comfort, good economy in use
• Silicone face-piece
• Supplied without filters – see page 110
6800S
Size: Medium
Code: 292267Each £89.99
6900S
Size: Large
Code: 292266 Each £89.99

Reusable Respirator Full Face Masks
Dräger FPS ® 7000 Full Face
Respirator
CONFORMS TO EN 12942 - TM3 (IN COMBINATION WITH
X-PLORE ® 8500)
• Robust and skin friendly EPDM, highly flexible at
high/low temperatures
• Shock proof and shock resistant
• Provides the highest protection level based on a
reliable tight fit due to a double-sealing frame
R56502 - Small
Code: 431322 Each £247.81
R56310 - Medium
Code: 431323 Each £225.83
R56503 - Large
Code: 431554 Each £247.81
Scott Safety Promask Full Face
Respirator
• User friendly inner mask
• High performance speech diaphragm
• Soft, comfortable silicone
• Excellent field of vision
• Filters sweep back each side – exceptional balance
• Supplied without filter - see page 111
Code: 292501 Each £101.99
Dräger X-plore ® 6300 Full Face Mask
CONFORMS TO EN 136 CLASS 2 (CE MARK), NIOSH, AS/NZS
• Made from robust and hypoallergeic EPDM,
featuring a double layer face seal
• Comfort fit on just about any shape of face with its
universal “one size fits all”
• Anti fog visor
• Scratch proof and distortion free visor offering 180 o
wide angle.
R55800
Code: 431320Each £134.05
Dräger X-plore ® 6530 Full Face Mask
with PC Visor
R55795 - Polycarbonate visor
Code: 431321Each £164.36
Respiratory Protection
Powered Respirators
Scott Safety Proflow Powered Respirators
• Electronically maintained level airflow
throughout usage
• Continuous display of battery and filter status
• No user calibration or servicing necessary
• 3 year/1800 hours blower warranty
• Extremely low through-life costs
• Automatic data-logging to in-board
microprocessor
Scott Safety Proflow Sc Promask
Ready-Pak
CONFORMS TO EN12942 CLASS TM3
064318 - With high protection against contaminants
(E.g. Asbestos) and based on the Proflow SC Promask
Full Face Respirator, ‘ready to go’ pack includes:
• Promask headtop
• Blower unit
• Battery
• Re-charger
• Hose
• Two Pro2000 PF10 P3 Filter Canisters
• Assigned Protection Factor = 40
Code: 293053 Each £683.99
Scott Safety Proflow Promask Full
Face Mask Respirator
CONFORMS TO EN136 CLASS 3
012681 - Full face respirator used either with a Pro
2000 filter (negative pressure), powered air, or a
compressed-air-line supply (positive pressure).
• Unique, contoured T-profiling sealing edge –
superior fit
• Computer designed air path channels –
exceptionally low airflow resistance, reducing
fatigue
• Wide panoramic visor – maximises field of vision
• Front mounted speech diaphragm – easy
communication
• Directed airflow prevents visor misting
• Filter positioning reduces neck strain, permits good
downward visibility
• For Particulate: Assigned Protection Factor = 40
• For Gas: Assigned Protection Factor = 20
Code: 018179 Each £88.99
109

Respiratory Protection
Filter Cartridges
3M FILTER SELECTION
Revolutionary 3M service life indicator technology
Deciding when to change gas & vapour filters can be a challenge. Some users change their filters only when they can detect
contaminant odour, taste, or irritation inside the respirator, with the result that the harmful substance has already broken through.
Others change their filters on a pre-determined schedule, potentially discarding still usable filters.
The 3M 6051i & 6055i Organic Gas & Vapour Service Life Indicator Filters
contain an easy-to-interpret visual End of Service Life indicator (ESLI) to help users in appropriate environments determine when to
change their filters. This unique and innovative technology is compatible with all 3M Half and Full-Face Masks and provides increased
confidence in protection, optimised filter use and peace of mind.
Particulate Filters
Filter Type Filter No. Protection Code Price per Pair
P2R 3M 2125 Particulates only 292637 £6.09
P2R 3M 2128 Particulates, ozone, nuisance level organic vapours and acid gases 292640 £7.09
P3R 3M 2135 Particulates only 292638 £7.09
P3R 3M 2138 Particulates, ozone, nuisance level organic vapours and acid gases 292632 £8.59
Gas and Vapour Filters
Filter Type Filter No. Protection Code Price per Pair
A1 3M 6051 Organic Vapour - Class 1 292633 £8.09
A1 3M 6051i Organic Vapour with Service Life Indicator - Class 1 292648 £9.09
K1 3M 6054 Ammonia - Class 1 292634 £9.59
A1 B1 E1 3M 6057 Organic and Inorganic Vapours and Acid Gas - Class 1 292636 £9.09
A1 B1 E1 K1 3M 6059 Organic and Inorganic Vapours, Acid Gas and Ammonia - Class 1 292265 £11.19
A1 Formaldehyde 3M 6075 Organic Vapour - Class 1 and Formaldehyde 293301 £40.09
A2 3M 6055 Organic Vapour - Class 2 292635 £10.19
A2 3M 6055i Organic Vapour with Service Life Indicator - Class 2 292649 £11.49
A2 B2 E2 K2 P3 3M 6099
Organic and Inorganic Vapours, Acid Gas, Ammonia -
Class 2 and Particulates; Full Face Masks only
290124 £29.99
AX
(single shift use only)
P3 3M 6098
Organic Vapours with a boiling point below 65oc; Full Face
Mask & single shift use only
292699 £31.99
Particualte Filters to use with Gas and Vapour Filters
Combine with 3M 6000 Series Gas and Vapour Filters for added Particulate Protection using the 3M 501 Filter Retainer.
Filter Type Filter No. Protection Code Price
P1R 3M 5911 Particulates only 292445 £33.49 - per 30
P2R 3M 5925 Particulates only 292663 £45.59 - per 20
P3R 3M 5935 Particulates only 292662 £53.29 - per 20
Filter Retainer 3M 501 n/a 292441 £3.09 - each
110
110

Filter Cartridges
SCOTT SAFETY FILTER SELECTION
Scott Pro 2000 canister filters offer a range of solutions for your specific respiratory
challenges, providing high quality yet cost effective protection.
Low weight, with a low breathing resistance, Pro 2000 filters are manufactured
using the highest specification media and materials to support wearers through the
most demanding applications.
The particulate-specific filters offer unrivalled efficiency against dust, smoke,
welding fumes, mist, micro-organisms and radio-active particles, whilst the
Scott Safety Pro 2000 Filter Canisters
To fit Scott Profile 40 Half Mask Respirator (Except 042799) and Vision 2 Full Face Respirator Conforms to EN 143:2000/A1 and EN 14387
To fit Scott Proflow Respirators Conforms to EN 12941 and EN 12942
Type & Colour Code Application Code Each
A2
B2
P3
P3
A2 B2 E2 K2 P3
042670 - Organic Gases and Vapours with a boiling point of 65˚C or above, Solid and Liquid particles,
Radioactive and Toxic particles, Bacteria and Viruses.
042671 - Inorganic Gases and Vapours, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria
and Viruses.
042799 - Organic, Inorganic, Acid Gases and Vapours, Ammonia, Solid and Liquid particles, Radioactive and
Toxic particles, Bacteria and Viruses.
Gas-specific cartridges give extended absorption capacity for gases and
vapours. Combined cartridges are suitable for both gaseous and particulate
contaminants.
Pro 2000 filters are approved to the latest EN standards, marked ‘R’ for re-usable
(EN 143:2000/ A1:2006), CE certified, and connect via a 40 mm EN 148-1 thread.
CE approvals: EN 143, EN 14387, CE 0121.
293039 £10.99
292781 £12.49
293091 £14.99
P3 052670 - Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 293045 £5.49
Respiratory Protection
Scott Safety Pro 2 Filter Cartridges
To fit Scott Profile 2 , Profile 60 and ProMask 2 Respirators Conforms to EN 143:2000/A1 and EN 14387
Type & Colour Code Application Code Pack of 2
A1 044070 - Organic Gases and Vapours (E.G Solvents). 292516 £6.49
A2 P3 044081 - Long duration, for Organic Gases and Vapours, Solid and Liquid particles. 292523 £11.99
A1 B1 E1 K1 P3 044083 - Organic, Inorganic, Acid Gases and Vapours, Ammonia, Solid and Liquid particles. 292525 £12.99
P3 05307-0 - Solid and liquid particles. 292515 £5.99
MOLDEX SAFETY FILTER SELECTION
Moldex EASYLOCK Filter System
EN 143:2000
To Fit Moldex 7000 Series Half Masks and 9000 Series Full Face Masks to EN 14387:2004 and
Type & Colour Code Application Code Each
A1 9100 - Organic Gases and Vapours with a boiling point above 65˚C 431353 £8.94
A1 B1 E1 K1 9400 - Organic, Inorganic, Acid Gases and Ammonia with a boiling point above 65˚C 431354 £11.73
P3 9030 - Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 431355 £7.85
111

Respiratory Protection
Powered and Supplied Air Systems
Nebosh Training
We recognise the importance of health and safety within the workplace. Throughout our branch network, highly skilled NEBOSH (The
National Examination Board in Occupational Safety and Health) trained personnel are on hand to offer knowledge of safety in the
workplace and of the PPE equipment that we sell.
Benefits of the 3M Modular Approach
3M have developed a comprehensive approach to
worker protection systems based on comfortable-towear
modules.
Each system incorporates easy-to-select modules that
can be combined into dozens of system configurations.
Users can mix and match modules as they move from
one environment to another, or from one application to
the next. This provides plug-and-play adaptability for
the continually evolving demands of your workplace.
Powered or Supplied Air System?
Powered Air System
Supplied Air System
Incorporates a battery powered motorised fan to draw air through a filter
Air is supplied from a compressor (compressed air must be of breathable quality)
Cannot be used to protect against substances with poor warning properties (taste/
smell)
Can be used to protect against substances with poor warning properties (taste/smell)
Must not be used in conditions that are Immediately Dangerous to Life or Health (IDLH)
Suitable for use over long shifts - no increase in breathing resistance
Can offer integrated head, eye and face protection
Selection Process for Powered Air System
Stage 1
Select the Starter Kit
See pages 113-114 for Starter Kit options
Stage 2
Choose a headtop
See pages 115-116 for Headtop options
Stage 3
Choose additional components for specific applications or
environments Eg: heavy-duty breathing tubes, specialist
filters etc
Selection Process for Supplied Air System
Stage 1
Belt Unit
Stage 2
Belt Unit Coupling
Stage 3
Hose
Stage 4
Hose Coupling Set
Stage 5
Breathing Tube
Stage 6
Headtop
25 112
112
For more information on 3M Respiratory Protection Get In Touch with us to find out more

Speciality Respirators and Kits
3M Versaflo TR-300 Powered Air Respirator
The 3M Versaflo range simplifies the equipment selection process, increases system versatility and improves user comfort
every step of the way.
Protection from Particles
• Easy-to-use, versatile respiratory protection systems for
environments with hazardous particles
Lighter and Smaller
• Slim, lightweight, balanced design for outstanding comfort
• Downward air inlet to enable sitting with unit
Intelligent Power
• The lightweight lithium ion battery quickly charges and has no
memory effect
• Electronic audible and visual alarm in case of low battery and/or
low air flow
Straight forward Care and Maintenance
• The turbo unit has a smooth surface to facilitate fast wipe downs for
easier cleaning
Intuitive Design
• All functional parts are indicated in blue
Respiratory Protection
3M Versaflo TR-315 Powered Air Starter Kit
This Starter Kit includes the TR-302E Turbo Unit, Particulate Filter, Pre-filter, Standard Belt,
High Capacity Battery Charger Kit, Length-adjusting Breathing Tube and Air Flow Indicator.
Now choose your headtops on page 115-116 277301 £533.99
If you have specific system requirements you can make up your own system with the following components:
Turbo Unit
3M Versaflo TR-302E Powered Air Turbo Unit
This new lightweight turbo unit is the key to an easy-to-use,
versatile respiratory protective system for environments with
hazardous particles.
This unit comes with an Air Flow Indicator only. 277300 £250.99
Batteries (lithium ion) and Chargers
TR-330 Standard Battery Pack 277304 £126.99
TR-332 High Capacity Battery Pack (longer life) 277305 £177.99
TR-341UK Single Station Battery Charger Kit 277306 £123.99
TR-344UK 4-Station Battery Charger Kit 277307 £450.99
Filters
TR-3600 Pre-filter 277308 £9.99
TR-3710E Particulate Filter (P) 277309 £20.99
TR-3800E P+Nuisance Level Organic Vapour Filter 277310 £25.99
TR-3820E P+Hydrogen Fluoride +Nuisance Level Acid Gas Filter 277311 £26.99
Breathing Tubes
BT-30 Length-adjusting Breathing Tube 277312 £38.99
BT-40 Heavy Duty Rubber Breathing Tube 277313 £66.99
113

Respiratory Protection
3M Jupiter Powered Air Respirator
The many advanced features of the 3M Jupiter Turbo Unit take powered air respiratory protection into
a new dimension of comfort and flexibility. Easy to maintain and use, it can feed any one of a wide
range of different headtops for many hazardous environments. Wide choice of gas, vapour and particle
filters for a broad range of applications.
Comfort
• Mounted on an ergonomic comfort belt for a snug fit that remains
comfortable even after hours of wear
Alarm
• Electronic audible and visual alarm in case of low battery and/or low air
flow
Filters
• Range of filter canisters for gases, vapours and particles
• Filter cover which prevents spark damage and allows
shower decontamination
Straightforward Care and Maintenance
• Smooth shape and Decontamination Belt allows easy
cleaning
3M Jupiter Powered Air Starter Kit
This Starter Kit includes a standard Jupiter Powered Air Turbo including Decontamination Belt and Clip,
Filter Gaskets, Air Flow Indicator and Calibration Tube as well as a pair of Organic Vapour and Particulate
(A2P) Filters, Pre-filters, Length-adjusting Breathing Tube, 8 hour Rechargeable Battery (NiMH) and a
Battery Charger.
Now choose your headtop on page 115-116 276801 £724.99
If you have specific system requirements you can make up your own system with the following components:
Turbo Unit
3M Jupiter Turbo Unit
Includes Decontamination Belt, Air Flow Indicator and
Calibration Tube
Filters
276802 £380.99
P Filter 290095 £20.99
A2P Filter 290096 £36.99
ABE1P Filter 290098 £48.99
A2BEK1P Filter 290097 £55.99
Pre-filter Pack 290105 £8.99
Batteries and Chargers
Battery Pack - 8 hour 200297 £181.99
Battery Pack - 4 hour 200292 £122.99
Battery Pack - 4 hour (intrinsically safe with pouch kit) 200419 £228.99
Intelligent Battery Charger 200298 £96.99
Note: A Jupiter Turbo Unit that has been used in a dust environment without an intrinsically
safe pouch fitted, should never be used for intrinsically safe applications.
Breathing Tubes
BT-30 Length Adjusting Breathing Tube 277312 £38.99
BT-40 Heavy Duty Rubber Breathing Tube 277313 £66.99
114
114
For more information on 3M Respiratory Protection Get In Touch with us to find out more.

Powered Respirators
3M Versaflo S-Series Headcovers and Hoods
3M Versaflo S-Series Headcovers and Hoods have been designed using the latest computer modelling techniques to
ensure a high level of comfort. They provide eye and face protection to EN 166 and are available in a range of fabrics and
designs to suit different applications.
Meets highest respiratory class - TH3
Comfortable to wear for long periods
Excellent air flow
Improved visibility
Respiratory Protection
Assigned Protection Factor (APF)
• When used with TR-300, Jupiter and V-500 - APF 40
Integrated Suspension Headcovers
• Ready to use straight out of the box
• Suitable for applications that require frequent replacement
of the entire headtop assembly
• Wide faceseal with soft elastic for improved comfort and
reduced noise
• Available in two adjustable sizes: S/M and M/L
Premium Reusable Suspension Hoods
Cost-effective choice for some high disposal rate environments
Just the soiled hood fabric is replaced, while the suspension and
air ducting can be reused.
Innovative Head Cradle with Adjustable Airflow
Open
valve
Closed
valve
3M Versaflo Headcover S-133
• Head and face coverage, as well as
providing eye and face protection to
• EN 166 - liquid splash and low
energy impact
• General purpose, cost effective fabric
Code: 277123 Each £35.49
3M Versaflo Hood S-657 Starter Kit
• Starter Kit includes 1x Head Cradle and
1x S-607 Overhood
277332 £72.49
3M Versaflo S-607 Replacement
Overhood
• Head, face, neck and shoulder
coverage, as well as providing eye
and face protection to EN 166 - liquid
splash and low energy impact
• S-657 uses a double shroud design for
its respiratory seal
277331 £31.99
3M Versaflo Hood S-433
• Similar to S-133 but with additional
neck and shoulder protection
Code: 277124 Each £60.49
3M Versaflo Hood S-855 Starter Kit
• Starter Kit includes 1x Head Cradle and
1x S-805E Overhood
277334 £139.99
3M Versaflo S-805E Replacement
Overhood
• Head, face, neck and shoulder
coverage, as well as providing eye
and face protection to EN 166 - liquid
splash and low energy impact
• S-805E incorporates a comfortable
knitted inner collar.
277333 £88.49
The external cover lets wearers control the location of the airflow
115

Respiratory Protection
Supplied Air Respirators
3M Versaflo M-Series Headtops
The 3M Versaflo M-Series features lightweight, compact and well-balanced faceshields and helmets that offer protection
from a range of respiratory, impact and splash hazards.
Integrated Protection for Multiple Hazards
• Provides protection from specific respiratory, head and
eye hazards
• Optional hearing protection
Modern, Well Balanced Design
• Lightweight with excellent balance
• Fully-adjustable head suspension
• A deflector allows users to direct the airflow inside the
headtop for increased control and comfort
Straightforward Care and Maintenance
• Spare parts and accessories are quick, easy and intuitive
to replace
Visor Design
• Visor design combines excellent peripheral and down
ward vision with good optical clarity
• Lenses provide chemical and scratch resistance
Assigned Protection Factor (APF)
• When used with TR-300, Jupiter or V-500 - APF 20
(M-100)
or APF 40 (M-300, APF 20 with Jupiter and M-400)
•
SNR
30
3M Versaflo M-100 Series Faceshields -
For Respiratory, Eye And Face Protection
• Two options for different applications:
• M-106 features a general purpose faceseal for
dusts, spraying and chemical processing
277350 £166.99
• M-107 features a flame resistant faceseal for
applications with hot particles.
277351 £175.99
3M Versaflo M-300 Series Helmets -
for respiratory, eye, face and head protection
• Two options for different applications:
• M-306 features a general purpose faceseal for
construction, chemical applications and heavy industry
277352 £244.99
• M-307 features a flame resistant faceseal for
applications with hot particles
277353 £244.99
3M Optime 11 Versaflo Headtop Mounted Ear
Muff For 3M Versaflow M Series
• Optimum seal ear muffs, with low contact pressure
• Snug comfort – even during long-term use
277349 £20.99
3M Versaflo M-925 Molten Metal Visor
• For use with any Versaflo M Series headtop
• Box of 5
277359 £18.99
3M Versaflo M-928 Peel Off Visor Covers
• Box of 10
277354 £18.99
116
116

D
Fo
D
sa
Sa
av
DU
•
•
•
•
Co
Powered Air Systems
The NEW DURAFLOW powered
air respirator from Scott Safety
is designed with user comfort in
mind. Its sleek, modern
ergonomic profile allows the
user to experience enhanced
comfort while working in the
most demanding environments.
Respiratory Protection
D
Fo
ap
av
st
a
re
A
DU
Co
DURAFLOW POWERED
AIR RESPIRATOR
Intuitive design allows
compatibility with existing
belt options for optimal
configuration
High IP rating minimizes dust
and water ingress during
decontamination
Removable battery means user can charge and
change batteries for uninterrupted work
Range of hose options
available enables usage with
variety of headtops
Sleek and modern design
enhances user comfort
Multiple filter options
including Combination filters
allow for usage in a variety of
environments
Active Air flow controlensures
correct airflow is
delivered to the user
DU
•
•
•
•
Co
DU
•
•
•
•
Co
DU
•
•
•
•
•
Co
DU
•
•
•
•
Co
117

ed
ety
Respiratory Protection
rt in
nts.
Powered Air Systems
Duraflow Starter Pack
For users who own a Scott Safety headtop (subject to
approval with DURAFLOW), a DURAFLOW Starter Pack is
available which contains the DURAFLOW unit, standard belt,
standard battery and charger. When used in conjunction with
a Scott Safety headtop, the starter pack provides all product
required to begin using DURAFLOW.
Approved to EN12941 & EN12942
DURAFLOW STARTER PACK Ref: 2031662
Code: 277365 2031662 Each: £xx.xx £474.00
Duraflow ReadyPak
For users who do not own an approved Scott Safety headtop,
DURAFLOW Readypaks are available which comprise the
same contents as the Starter Pack, with the addition of a Scott
Safety headtop. A number of headtop configurations are
available to best suit the application and user.
DURAFLOW FH1 READYPAK Ref: 2031663
• Revolutionary soft head cradle for intuitive and straightforward donning
• Ultra-clear PETG visor giving wide field of view and a clear down-view panel
• Half hood design with skin-friendly neoprene chin seal
• CE certified to EN12941 TH3, EN166 1F
Code: 277366 2031663 Each: Each £xx.xx £546.00
DURAFLOW FH2 READYPAK Ref: 2031664
• Revolutionary soft head cradle for intuitive and straightforward donning
• Ultra-clear PETG visor giving wide field of view and a clear down-view panel
• Full hood design with skin-friendly neoprene chin seal
• CE certified to EN12941 TH3, EN166 1F
Code: 277367 2031664 Each: Each £xx.xx £559.00
DURAFLOW FH21 READYPAK Ref: 2031665
• Revolutionary soft head cradle for intuitive and straightforward donning
• Ultra-clear PETG visor giving wide field of view and a clear down-view panel
• Anti-static full hood design with skin-friendly neoprene chin seal
• CE certified to EN12941 TH3, EN166 1F
Code: 277368 2031665 Each: Each £xx.xx £567.00
DURAFLOW FH22 READYPAK Ref: 2031666
• Quick-draw adjustable headband and harness assembly for easy donning
• Double cape design for compatibility with various coverall designs
• Disposable full hood design with optional disposable hose cover
• Can be used for single or multi-use when maintained in accordance with user instructions
• CE certified to EN12941 TH3, EN166 1F
Code: 277369 2031662 Each: Each £xx.xx £551.00
DURAFLOW FH31 READYPAK Ref: 2031667
• Lightweight polyethylene frame with anti-mist coated acetate visor
• Washable and replaceable polyether foam face seal
• Face shield design with broad elastic headband harness
• CE certified to EN12941 TH2, EN166 1F
Code: 277370 2031667 Each: £xx.xx Each 579.00
118
118

Powered Air Systems
The Tornado Powered Air Respiratory
System is one of the most flexible
respiratory systems available on the
market today. With a choice of
interchangeable headtops, filters and
hoses the modular Tornado system
increases productivity through
minimising user fatigue.
Respiratory Protection
SCOTT SAFETY T-POWER UNIT
CONFORMS TO EN 12941/2
At the heart of the Tornado
system is the T-Power
powered air respirator.
T-Power is a lightweight
unit which is designed to fit
neatly around the body. With
15 automatic power levels for
optimum airflow, visual and
audible alarms and extended battery life, T-Power
ensures workers can concentrate on their work,
not their equipment.
Code: 277010 Each: Each £200.00 £206.00
TORNADO
MODULAR RESPIRATORY SYSTEM
TORNADO SMART CHARGER
TOR/BC/SM
Takes ultimate care of the battery
by reverting to trickle charge on
completion. LED lights inducate
status. Full charge in 7 hours.
TORNADO BATTERY PACK
TOR/BATT/LITE
8 hour battery - Ultra lightweight,
smart NiMh.
For use with smart charger only.
TORNADO FILTER ADAPTOR
TOR/ADAPT
For use where more than 1 filter is
required on the T-Power unit.
TORNADO STRETCH HOSE
2026235 / FH1/2/21/22/31 50-100cm
Takes ultimate care of the battery
by reverting to trickle charge on
completion. LED lights inducate
status. Full charge in 7 hours.
Code: 277045 Each: £76.20 £79.30 Code: 277038 Each: £155.05 £76.20 Code: 277014 Each: £76.20 £31.85 Code: 431549 277045 Each: £76.20 £27.45
TORNADO T-POWER FILTERS
TYPE & COLOUR CODE APPLICATION CODE
NO. OF
FILTERS
EACH
ADAPTOR
REQUIRED?
A1 B1 E1 PSL
TF230 - Organic gases and vapours with a boiling point above 65°C. Inorganic
and acid gases and vapours, eg. chlorine, hydrogen sulphide, hydrogen
cyanide, sulphur dioxide and hydrogen chloride. Plus solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus)
£18.50
277023 3 £00.00 YES
A2 B2 E2 K2 Hg PSL
TF233 - Organic gases and vapours with a boiling point above 65°C. Inorganic
and acid gases and vapours, eg. chlorine, hydrogen sulphide, hydrogen
cyanide, sulphur dioxide and hydrogen chloride. Ammonia and organic
ammonia derivatives. Plus solid and liquid particulates (dusts, fibres, mists,
fumes, bacteria and virus)
277037 3 £00.00 YES
PSL PF251/2 292668 1 £00.00 NO
PSL
PF251/SUPER - (Long Life / High Capacity) Solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus). Approx 3 times the capacity
of PF251/2
£21.54
£12.25
277039 1 £00.00 NO
119

Respiratory Protection
Dräger Powered Respiratory System
Dräger X-plore ® 8000 range was created for maximum respiratory and facial protection even
under the most challenging of conditions. Aside from safety, comfort and top performance in
numerous application fields, the X-plore ® 8000 headpieces can be effortlessly combined with other
components from the X-plore ® series.
Dräger X-plore ® 8500 Blower Unit
R59500 - CONFORMS TO EN 12941 WITH DRAGER X-PLORE 300 HOODS, HELMETS AND VISORS.
EN 12942 WITH DRAGER X-PLORE 4740/6000 HALF & FULL FACE MASK
• Robust designed for daily use in tough environments
• Self-explanatory operation, minimise user error
• Comfortable and easy to maintain
• Intelligent alarm system with two-step alarm concept
• Lithium-ion technology
• Filter recognitions with advanced sensor technology
Code: 431289 Each £326.90
Dräger X-plore ® 8000 Standard Belt
R59700
• Provides secure fitting for the wearer when faced with the most challenging of
environments
Code: 431291 Each £42.19
Standard Belt
Dräger X-plore ® 8000 Storage Box
R59690
• Provides robust protection for the main X-plore ® unit
Code: 431324 Each £77.76
Dräger X-plore ® 8000 Carrying Systems, Batteries and Chargers
DRÄGER X-PLORE ® 8000 ACCESSORIES
Product Name Product Description Code Price
X-plore ® 8000 Decon Belt R59710 - Adjustable between 750mm & 1,400mm 431292 £44.67
X-plore ® 8000 Comfort Pad R59730 - For prolonged use 431293 £15.71
X-plore ® 8000 Standard Charger R59580 - Provides rapid charging 431296 £107.53
X-plore ® 8000 High Capacity Battery R59585 - Provides twice the capacity of a standard battery 431295 £210.07
X-plore ® 8000 Standard Battery R59565 - Provides at least 4 hours of power 431294 £141.94
DRÄGER X-PLORE ® 8000 FILTERS
Type & Colour Code Application Code Each
P R S L
6739535 - Reusable particulate, solid & liquid filter
431297 £7.18
A2 6739580 - Organic gases and vapours with boiling point >65 °C 431298 £26.84
K2 6739585 - Ammonia and organic ammonia derivatives 431299 £27.96
A2
P R S L
6739545 - Organic gases and vapours with boiling point >65 °C 431300 £37.05
A1 B1 E1 P R S L
6739550 - Organic/inorganic acidic gases and vapours with boiling point >65 °C
431301 £46.40
120
120
A1
B1 E1 K1 Hg PRSL
6739555 - Organic/inorganic acidic gases + ammonia, mercury and vapours with boiling point
>65 °C
431302 £53.35

Dräger Powered Respiratory System
Dräger X-plore ® 8000 Standard Short
Hood
CONFORMS TO EN 12941 TH3 & EN 166 1 F3
• Integral part of the new powered
air-purifying respirator
• Robust, effective protection
• Provides a high degree of comfort
• Compatible with other products
• Size (S/M, L/XL)
Code: 431309 Each £26.47
Dräger X-plore ® 8000 Premium
Short Hood
CONFORMS TO EN 12941 TH3 & EN 166 1 F3
• Increase chemical protection
• Oil and water repellent
• Premium sweatband
• Cleaning and disinfection possible
• Size (S/M, L/XL)
Code: 431311 Each £43.01
Dräger X-plore ® 8000 Standard Long
Hood
CONFORMS TO EN 12941 TH3 & EN 166 1 F3
• Integral part of the new powered
air-purifying respirator
• Robust, effective protection
• Provides a high degree of comfort
• Compatible with other products
• Complete protection for head, face and neck area
• Size (S/M, L/XL)
Code: 431313 Each £39.71
Respiratory Protection
Dräger X-plore ® 8000 Premium Long
Hood
CONFORMS TO EN 12941 - TH3 & EN 166 1 F3
• Increased chemical protection
• Oil and water resistant
• Double seamed ends to avoid fraying
• Reusable material
• Panoramic view ensuring an almost natural
field of vision
• Complete protection for head, face and neck area
• Size (S/M, L/XL)
Code: 431315 Each £57.07
Dräger X-plore ® 8000 Protective
Visor
R59900 CONFORMS TO EN 12941 - TH2 EN 166 1 B 93
• Protective visor for the most challenging
industrial job
• Specially designed air channels leads the air
directly into the breathing area
• Prevents unpleasant drafts of air over the head
• Durable and resistant PC visor
• 90 degree hinged visor
Code: 431317 Each £110.01
Dräger X-plore ® 8000 Helmet With
Visor
CONFORMS TO EN 12941 - TH2 (RESPIRATORY PROTECTION),
EN 397 (HEAD PROTECTION), EN 166 1 B 9 3 (EYE
PROTECTION)
• Protective visor for the most challenging
industrial job
• Specially designed air channels leads the air
directly into the breathing area
• Prevents unpleasant drafts of air over the head
• Durable and resistant PC visor
• 90 degree hinged visor
R59910 - White
Code: 431319 Each £153.87
R58325 - Black
Code: 431318 Each £153.87
DRÄGER X-PLORE ® 8000 HOSES
Dräger X-plore ® 8000 Breathing Hoses
Product Name Application Code Price
X-plore ® 8000 Standard Hose (For hoods) R59620 - For hoods 431305 £33.92
X-plore ® 8000 Flexible Hose (For Hoods) R59600 - For hoods 431306 £40.95
X-plore ® 8000 Flexible Hose (For tight fitting headpieces) R59610 - For tight fitting head pieces 431304 £40.95
X-plore ® 8000 Standard Hose (For helmets & visors) R59640 - For helmet & visors 431307 £32.68
X-plore ® 8000 Fleible Hose (For helmets and visors) R59650 - For helmets & visors 431308 £39.71
X-plore ® 8000 Standard Hose (For tight fitting headpieces) R59630 - For tight fitting head pieces 431303 £33.92
121

Respiratory Protection
Escape Hoods
Dräger Parat ® 7500 Combined Fire & Industrial Escape Hood
Clearly Visible Hood
Hood in signal colour for high
visibility
Internal Head Harness
Thanks to the automatically adjusting
internal head harness, no additional
tightening of the hood is required
High Performance Filter
Filter expiration date is clearly
marked: filter is automatically
released from packaging when
opened
Overall Protection
16 years of total service life
(providing the filter is exchanged
after 8 years). The hood provides
respiratory and eye protection
Clear View
Wide field of vision due to a
specially formed visor. Always a clear
view thanks to a special anti-fog
coating
Good Fit
Specially designed half mask fits a
wide variety of face sizes
Exhalation Valve
Directly leads the exhaled air out of the half mask
Dräger Parat ® 7500 Fire & Industrial Escape Hood
CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOODS; ACCORDING TO DIN 58645-7 FROM
FILTERING ESCAPE DEVICES; FILTER ADDITIONALLY TESTED IN ACCORDANCE WITH EN 14387:2004
FOR GAS FILTERS AND COMBINES FILTER
• Protects against toxic gases, vapours, particles and fire-related gases
• Filter: ABEK CO P3
• Fastest possible escape
• Robust housing
Textile Neck Seal
Flexible textile neck seal ,
alternatively available with an
elastomeric neck seal for an even
higher protection level
R59475 - Hard case for splash water protection (IP54)
Code: 431333Each £192.46
R59427 - Soft case for dust protection (IP5)
Code: 431334Each £192.46
Dräger Parat ® 4700 Industrial Escape Hoods
122
122
Dräger Parat ® 4720 Escape Hood - Soft Pack
R59421 CONFORMS TO DIN 58647-7 FOR FILTERING ESCAPE DEVICES; FILTER ADDITIONALLY
TESTED IN ACCORDANCE WITH EN 14387:2004 FOR GAS FILTER(S) AND COMBINED FILTER(S).
• Industrial escape hood with ABEK P3 filter
• Industrial face hood for sudden use in Industrial gases, vapours and particles
• Fast escape from hazards toxic gases, vapours and particles
• Soft pack provides dust protection (IP5)
Code: 431335Each £175.49
Dräger Parat ® 4730 Escape Hood - Hard Pack
R59431 CONFORMS TO DIN 58647-7 FOR FILTERING ESCAPE DEVICES; FILTER ADDITIONALLY
TESTED IN ACCORDANCE WITH EN 14387:2004 FOR GAS FILTER(S) AND COMBINED FILTER(S)
• Industrial escape hood with ABEK P3 filter
• Escape hood In robust hard case (provides dust protection to IPS)
• Allow the user to check the expiration date and the device condition
• Hard pack provides splash water protection (IP54)
Code: 431336 Each £175.49

Escape Hoods
Dräger Parat ® 5500 Fire escape Hoods
Dräger Parat ® 5510 Escape Hood - Single Pack
R59415 CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOOD, ADDITIONALLY TESTED FOR THE
USE AGAINST H2S (AT 2,500PPM) IN ACCORDANCE WITH DIN 58647-7
• Fire escape hood with CO P2 filter.
• Safe escape from suddenly occurring toxic fire related gases, vapours and
particles
• Compact, easy to handle
Code: 431327Each £152.84
Dräger Parat ® 5520 Escape Hood - Soft Pack
R59425 CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOODS, ADDITIONALLY TESTED FOR THE
USE AGAINST H2S (AT 2,500PPM) IN ACCORDANCE WITH DIN 58647-7
• Fire escape hood with CO P2 filter
• Safe escape from suddenly occurring toxic fire related gases, vapours and
particles
• Soft pack provides dust protection (IP5)
Code: 431328Each £175.49
Respiratory Protection
Dräger Parat ® 5530 Escape Hood - Hard Pack
R59435 - CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOODS, ADDITIONALLY TESTED FOR
THE USE AGAINST H2S (AT 2,500PPM) IN ACCORDANCE WITH DIN 58647-7
• Fire escape hood with CO P2 filter
•Safe escape from suddenly occurring toxic fire related gases, vapours and
particles
Code: 431329 Each £175.49
Dräger Wall holder For Parat ® Hard Case
Code: 431330Each £16.97
Dräger Parat ® 3100 Half Mask
R57981 - CONFORMS TO RECOGNIZED STANDARD FOR INDUSTRIAL ESCAPE DEVICES
(DIN 58647-7)
• Provides users a minimum of 15 minutes escape time
• Half mask escape device equipped with a multi-gas ABEK15 filter
Code: 431331 Each £68.79
Dräger Parat ® 3200 Mouth and Nose Clip
R57982 - CONFORMS TO RECOGNIZED STANDARD FOR INDUSTRIAL ESCAPE DEVICES
(DIN 58647-7)
• Filter escape device are designed for 15 minutes of escape time with ABEK filter
robust handy case and robust clip
• Safe escape from suddenly occurring toxic fire related gases, vapours and
particles
Code: 431332Each £63.96
123

Respiratory Protection
Face Fit Testing Kits
3M Face Fit Test Kit
Each kit contains a hood and collar assembly, two nebulisers, one bottle of
sensitivity solution,
one bottle of fit test solution, detailed user instructions and CD ROM, spare
atomiser heads for the nebuliser and a pin for unblocking nebulisers.
Qualitative RPE Face Fit Test Kit for:
• FFP1, FFP2, FFP3 filtering face pieces
• Half facemask respirators fitted with particulate or combined filters
3M FT10 Face Fit Test Kit (Sweet)
Code: 290128 Each £149.99
3M FT30 Face Fit Test Kit (Bitter)
Code: 290129Each £149.99
3M FT11 Face Fit Test Kit
Replacement Sweet Sensitivity
Solution
• Packed in cartons of 6
Code: 290139 Each £17.99
3M FT32 Face Fit Test Kit
Replacement Bitter Solution
• Packed in cartons of 6
Code: 290138Each £17.99
124
124

Gas Detection
Respiratory Protection
Scott Safety Protégé ZM Single Gas Detector
The Protégé ZM Single Gas Monitor is an easy to use, zero maintenance solution that delivers high performance in a small ergonomically designed package.
• One button activation, adjustable alarm settings and an easy to read display means it is simple to use
• Once activated the Protégé does not require charging or calibration so these monitors can be deployed in the field 24 hours a day, every day for 2 years, maintenance
and hassle free
• The H2S and COmodels include a hibernate feature which allows you to extend your battery life up to 1 additional year
• 4 year warranty
ATEX Directive approved (94/9/EC) ATEX II 1 G Ex ia IIC T4
Product description Code Price
Protégé ZM Single Gas H2S Monitor HV Red 293070 £109.99
Protégé ZM Single Gas CO Monitor HV Red 293071 £109.99
Protégé ZM Single Gas O2 Monitor HV Red 293072 £109.99
Protégé IR Connect with USB Cable 293073 £65.99
Protégé ZM Portable Test Station 293074 £1325.99
Protégé ZM Stationary Test Station 293075 £1195.99
H2S Single Gas Cylinder H2S 25pp 293076 £125.99
CO Single Gas Cylinder CO 100 ppm 6D 293077 £100.99
O2 Single Gas Cylinder O2 16 6D 293078 £120.99
10ft Clear Tygon Tubing 293079 £11.99
Regulator 2AL 8AL 6D 5LPM 293080 £85.99
125

Eye & Face Protection
Buying Guide
Choosing Safety Eyewear
To help choose safety eyewear best suited to your needs the following information may be
useful.
Whilst every effort should be made to remove hazards as the result of a Workplace Risk
Assessment, if safety eyewear is necessary as a last resort, the following section criteria should
be considered:
• Type of Hazard
• Type of Protection
• Type of Lens
Anti-mist? Anti-scratch? Does your eyewear reach the
standard?
“K” and “N” are coating treatments that reach the standard set by EN 166. It’s easy how to find
out, you just look for the “K” (anti-scratch) and “N” (anti-mist) on the
lens of your safety glasses, goggles and face shields.
By EN law all safety eyewear needs to be marked on the lens. If the lens doesn’t have ”K” or
“N” marked on, then they do not reach the required standard.
K = Anti-scratch treatment applied to the
surface of the lens whose hardness is a
barrier against superficial damages that
can impair vision.
N = Anti-mist treatment, which, due
to its chemical and physical abilities,
prevents the formation of condensation by
absorbing the humidity drops.
Health & Safety
Type Of Hazard
Hazards fall into 4 main categories:
1. Mechanical – Flying Debris, Dust or Molten Metal
2. Chemical – Fumes, Gases or Liquid Splash
3. Radiation – Heat (Infra-red), Ultraviolet light or Glare
4. Laser Light – Over a wide spectrum of wavelengths
from Ultraviolet to Infra-red
Type Of Eye Protection
SAFETY SPECTACLES Comfortable and available in a
variety of styles. Will not keep out Dust, Gas or Molten
Metal. We also offer a complete prescription safety
eyewear service.
SAFETY GOGGLES Provide protection for all types of
hazards. May be worn over spectacles.
SAFETY FACESHIELD Protects the face as well as the
eyes but does not keep out dust or gas. Comfortable to
use for long periods.
Clear lens
General purpose for indoor applications that require
impact protection. Provides 99% protection from harmful
UV-B rays.
2-3 U 1 FT K N CE
U – EN166 FT CE
Smoke
Protection from sunlight, excessive glare and high levels
of hazardous light, ideal for all outside workers. Full
colour recognition.
2-3 U 1 FT K N CE
Indoor/Outdoor
Reduces sun glare and intense sunlight, mirror coating
reflects glare. Full colour recognition.
126
126
European Standards EN 166
To assist you in your understanding of markings on Eye Protection Products covered by this Standard you should
note:
Optical Standard: Frame Lens
Class 1: For continuous work - 1
Class 2: For intermittent work - 2
Class 3: For occasional work, but must not be worn continuously - 3
Mechanical Properties:
Increased Robustness (General Purpose) - S
High Energy Impact (190m/sec) A A
Medium Energy Impact (120m/sec) Grade 1 B B
Low Energy Impact (45m/sec) Grade 2 F F
Increased Robustness – General Purpose Impact-Performance at Extremes of Temperature T T
Areas of Use:
Liquids (chemical) 3 -
Large Dust Particles 4 -
Gas and Fine Dust Particles 5 -
Short Circuit Electric Arc 8 -
Molten Metals and Hot Solids 9 9
Optional:
Resistance to Misting/Fogging - N
Resistance to Mechanical Damage (Anti-Scratch) - K
NB: The “A”, “B”, “F” and “S” markings on frame and lens represent tests carried out on each component and
therefore may be different – in which case the lower level must be assigned to the complete unit when making
an assessment.
EN 169 Welding Filters
EN 175 Welding Work Equipment
EN 170 Ultra-Violet Filters
EN 207 Laser Protection Eyewear
EN 171 Infra-red Filters
EN 208 Laser Adjustment Eyewear
EN 172 Solar Protection Filters for Industrial Use
Anti-Mist
Many products in this section feature anti-mist coatings and are
marked with this icon:
ANTI
MIST
Anti-Scratch
High impact but scratch resistant optically correct material based on polycarbonate with
a quartz crystal coating on the front of the lens. This lens absorbs UVA and UVB light up
to a wavelength of 400 nanometres. Many products in this section have anti-scratch
properties and are marked with this icon to the right.
Yellow
Ideal for low-light environments, artificially lit areas,
dawn and dusk. Provides high definition visibility and
good contrast in low light.
Platinum
Bollé Safety revolutionized eye protection with an
innovation that exceeds the requirements of all
international standards, especially the En 166 KN option.
It guarantees greater safety, reliability and comfort. This
permanent coating on both slides of the lens gives a
high resistance to scratching, to the most aggressive
chemicals and delays the onset of fogging for well over
2 minutes.
CSP (Comfort Sensory Perception)
Lens coating that provides 100% protection against UVA
& UVB rays and blue light. This innovative coating is an
effective solution for all activities that alternate exposures
to bright light and low light. Suitable for extreme hot
and cold temperature environments. CSP is also a
combination of the platinum double sided anti-scratch
and ant-mist fog coating.
ESP (Extra Sensory Perception)
ESP provides 100% protection against UVA & UVB rays,
filtering filters out 70% of blue light. Transmits over 60%
of visible light.
Twilight
Twilight offers the advantages of ESP but with a double
anti-mist coating on both sides. This prevents fogging in
the most challenging of conditions. Twilight are designed
to be used in low light conditions, it improves contrast.
It’s light transmission rate is perfect for indoors or
outdoor. It filters 76% of blue light.

127

Eye & Face Protection
Premium Eye Protection
ANTI
MIST
Smoked
Twilight
Bollé Rush+ Safety Spectacles
K & N Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
• Co-injected, bi colour temples that are cushioning and fit
perfectly to the head
• Unique double side platinum coating for excellent clarity and
protection
• Non-slip bridge
• Platinum anti-scratch/anti-mist lens
• Colour: Clear anti-scratch/anti-mist lens
Code: 293026Each £6.70
• Colour: Smoked anti-scratch/anti-mist lens
Code: 293027 Each £7.38
• Colour: Twilight anti-scratch/anti-mist lens
Code: 431357 Each £7.38
Bollé Contour Safety Spectacles K & N
Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
• Incredibly lightweight (21g) with TPE bridge and temples
• Market leading levels of fit, comfort and protection integrated
side shields with exceptional field of view over 180°
• Supplied with a free microfibre bag
• Colour: Clear Platinum anti-scratch/anti-mist lens
Code: 292915Each £6.95
• Colour: Smoked Platinum anti-scratch/anti-mist lens
Code: 292916Each £7.55
• Colour: ESP anti-scratch
Code: 292917Each £7.85
ANTI
MIST
ESP
ANTI
MIST
Bollé Slam+ Safety Spectacles K & N
Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
• Ultra modern, ultra lightweight, sports style wrap
• Ultra close fitting protection
• Panoramic vision
• Co-injected sports temples
• Colour: Clear Platinum anti-scratch lens/anti-mist lens
Code: 431359 Each £6.70
• Colour: Smoked Platinum anti-scratch lens/anti-mist lens
Code: 431360 Each £7.38
• Colour: CSP Platinum anti-scratch/anti-mist lens
Code: 431361 Each £7.38
128
128
ANTI
MIST
Bollé Silium+ Safety Spectacles K & N
Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
Silium+ combines the styling and success of the Silium with a
comfortable and ultra lightweight polycarbonate frame
• Adjustable non-slip bridge
• Great all-round vision
• Platinum anti-scratch and anti-fog
• Weight 21g
• Colour: Clear Platinum anti-mist/anti-scratch lens, Gun Metal
temples
Code: 292911 Each £8.35
• Colour: Smoked Platinum anti-mist/anti-scratch lens, Gun
Metal temples
Code: 292912 Each £8.95
• Colour: CSP Platinum anti-mist/anti-scratch lens, Gun Metal
temples
Code: 431287 Each £8.95

Premium Eye Protection
ANTI
MIST
Smoked
Bollé IRI-s Safety Spectacles K & N Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
• Universal fit and protection
• Ultra-modular and infinitely adaptable
• B-Flex shape memory bridge
• Bridge is height adjustable
• Pivoting non-slip ergonomic temples
• Platinum anti-scratch and anti-fog lenses
• Optical class 1 polycarbonate lenses
• IRI-s is also available with corrective reading lenses
• Supplied with sports cord
Code: 293121Each £8.65
• Colour: Smoked Platinum anti-scratch/anti-mist lens
Code: 293122 Each £9.35
• Colour: Twlight Platinum anti-scratch/anti-mist lens
Code: 293123 Each £9.35
• Colour: Clear. Black/red frame.
1.5 Reading Area +1.5 ASAF IRIDPS
Code: 293124 Each £9.75
Eye & Face Protection
ANTI
MIST
Bollé Rush+ Small Safety Spectacles K & N Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
• Suitable for narrower faces
• Bi-material, bi-colour temples pink/white or blue/white
• Platinum anti-scratch and anti-fog
• Adjustable non-slip bridge
• Colour: Blue/White Platinum anti-scratch and anti-mist lens
Code: 431286 Each £6.70
ANTI
MIST
Bollé Rush+ Small Safety Spectacles K & N Rated
Conforms to EN 166 and EN 170 and EN 172 1FT KN
• Suitable for narrower faces
• Bi-material, bi-colour temples pink/white or blue/white
• Platinum anti-scratch and anti-fog
• Adjustable non-slip bridge
• Colour: Pink/White Platinum anti-scratch and anti-mist lens
Code: 431352 Each £6.70
ANTI
MIST
Bollé Tracker II Hybrid Safety Spectacle K & N Rated
CONFORMS TO EN 166 EN 170 AND EN 172 1BT 34 KN
• Provides the comfort of a spectacle with the fit and seal of a goggle
• Interchangeable foam seal which gives added brow and cheek protection
• Fully adjustable strap that can also be removed
• Straight sports temples
• Optical class 1 Platinum anti-scratch and anti-mist polycarbonate lens
• Wrap-around base 8 curve
• Fantastic field of view and side ventilation
• Excellent all round protection
• Prescription insert available which can be glazed to all prescriptions
• Supplied with a micro fibre pouch
• Colour: Clear Platinum anti-scratch/anti-mist lens, K & N rated lens
Code: 292934Each £9.20
• Colour: Smoke Platinum anti-scratch/anti-mist lens, K & N rated lens
Code: 430686Each £9.85
Also available in Yellow
129

Eye & Face Protection
Premium Eye Protection
MAIN FEATURES
•Adjustment of
temples in length and
inclination
• Over moulded nose
pads for comfort
Keep Safe 5X8 Safety Spectacles K & N Rated
CONFORMS TO EN 166 1.FT. KN
The Keep Safe 5X8 represents the essence of protective eyewear. The innovative
SoftPad technology combines the excellent coverage of the eye area and the
angle adjustment of the temples for exceptional comfort and stability.
• Over-moulded nose pad for comfort without pressure
• Adjustment of temples in length and inclination
• SoftPad technology
• Colour: Clear anti-scratch/anti-mist lens
Code: 293194Each £8.49
• Colour: Solar (The natural vision solar) anti-scratch/anti-mist lens
Code: 293195 Each £8.99
• Colour: Yellow (The enhanced contrast) anti-scratch/anti-mist lens
Code: 293196 Each £8.99
Solar GI5
ANTI
MIST
Yellow
uvex i-works
Conforms to EN 166 1F KN CE
• Sporty robust design
• Panoramic lens offers great lateral vision
• Permanent lens coating technology with Uvex Supravision anti-fog and anti-mist
• Soft grip sidearms for secure stable fitting and excellent pressufe free fit
• Low profile side arms with practical hang cord attachment option
• Offers high levels of campatability with other PPE
• 100% metal free provides reduced weight
• Suitable for a wide range of workplace environments
• Colour: Clear/UV 2-1,2, anti-mist and anti-fog lens. Anthracite/Blue frame
Code: 431518Each £5.50
• Colour: Clear /UV 2-1,2, anti-mist and anti-fog lens. Anthracite/Lime frame
Code: 431519 Each £5.50
• Colour: Grey sunglare 23% / UV - 2,5, anti-mist and anti-fog lens. Antharacite/Grey frame
Code: 431520 Each £5.50
• Colour: Amber/UV - 2-1,2, anti-mist and anti-fog lens. Black/Yellow frame
Code: 431521 Each £5.50
• Colour: Clear Sunglare filter / UV 5-1,7 silver mirror, anti-mist and anti-fog lens.
Antharacite/Grey frame
Code: 431522 Each £8.00
130
130
Univet 546 Impact Protection Safety
Spectacles K & N Rated
Conforms To EN 166 1. FT. Kn
• Extremely lightweight and modern spectacles
with sporty lines
• Wraparound polycarbonate lens with integrated side shields
• Temples equipped with over moulding technology
to guarantee comfort and fit
• Non-slip rubber nose pad
• Colour: Smoked anti-scratch lens
Code: 431266 (546.12.45.02) Each £6.45
• Colour: Clear anti-scratch lens
Code: 431265 (546.03.45.00) Each £6.53

Premium Eye Protection
ANTI
MIST
ANTI
MIST
Brown
Smoked FM
Keep Safe 557 Metal Frame Safety
Spectacles K & N Rated
Conforms To EN 166 1. FT. KN
Rating & protection against UV400
• Metal frame with wrapping design
• Temple tips with metal core for easy adjustment
• Neoprene front support
• Flex hinges
• Colour: Clear anti-scratch/anti-mist lens
Code: 293198Each £9.49
• Colour: Brown (The linear protection) anti-scratch/anti-mist
lens
Code: 293199Each £9.49
Keep Safe 5X3 Safety Spectacles K & N
Rated
Conforms To EN 166 1. FT. KN
• Exclusive UDC coating
• Lens with FLD (Floating Lens Design) technology
• Frame engineered to cushion the contact points on the face
• Extended 9 base wrap-around lens, provides extra coverage
around the eyes
• Ventilation system
• Fits the face without adjustments
• Colour: Clear anti-scratch/anti-mist lens
Code: 293191Each £8.99
• Colour: Smoked (The Solar Flash Mirror) anti-scratch/antimist
lens
Code: 293192Each £8.99
Eye & Face Protection
Modern Safety Spectacles
ANTI
MIST
Univet 506U Light Weight Ladies Safety
Spectacles K & N Rated
Conforms To EN 166 1. F. KN
• Panoramic wrapping lens with anti-scratch and anti-fog
• Temples with adjustable inclination and length adjustment
• Soft terminal tips on the temple arms to eliminate local
pressure
• Optimal comfort and fit thanks to the soft adjustable nose pad
• Colour: Clear/Pink anti-scratch/anti-mist lens
Code: 431345 (506U.03.02.00) Each £4.65
Univet 506U Light Weight Safety Spectacles
K & N Rated
Conforms To EN 166 1. F. KN
• Panoramic wrapping lens with anti-scratch and anti-fog
• Temples with adjustable inclination and length adjustment
• Soft terminal tips on the temple arms to eliminate local
pressure
• Optimal comfort and fit thanks to the soft adjustable nose pad
• Colour: Clear/Green anti-scratch/anti-mist lens
Code: 431263 (506U.03.00.00) Each £5.57
ANTI
MIST
Solar GI5
• Colour: Solar Lens anti-scratch/anti-mist lens
Code: 431264 (506U.04.04.05) Each £4.25
131

Eye & Face Protection
Modern Safety Spectacles
ANTI
MIST
3M Solus 1000 Series Kit
NEW: Stylish, lightweight spectacles offering great fit and comfort
• Features superior 3M Scotchgard Anti-Fog Coating for reliable protection; outperforms the requirements of the EN166 N
marking by 5x* (*Based on 3M internal testing per EN168 test method)
• Economical: Longer lasting coating withstands at least 25 washes
• Features removable padded temples and a soft nose bridge for added comfort
• Kit contains optional elastic strap and vented foam gasket for reduced exposure
• Optical clarity class 1; 2C-1.2
• Colour: Clear PC 3M Scotchgard AF Coated Lens.
Green/Black Frame
Code: 293254Each £11.46
• Colour: Clear PC 3M Scotchgard AF Coated Lens.
Blue/Black Frame
Code: 293250 Each £11.46
132
132
ANTI
MIST
3M Solus 1000 Series Spec
NEW: Stylish, lightweight spectacles offering great fit and comfort
• Features superior 3M Scotchgard Anti-Fog Coating for reliable protection;
outperforms the requirements of the EN166 N marking by 5x* (*Based on 3M
internal testing per EN168 test method)
• Economical: Longer lasting coating withstands at least 25 washes
• Features removable padded temples and a soft nose bridge for added comfort
• Optical clarity class 1; 2C-1.2
• Colour: Clear PC 3M Scotchgard AF Coated Lens.
Green/Black Frame
Code: 293255Each £7.60
• Colour: Grey PC 3M Scotchgard AF Coated Lens. Green/Black Frame
Code: 293256 Each £7.60
• Colour: Clear PC 3M Scotchgard AF Coated Lens. Blue/Black Frame
Code: 293251 Each £7.60
• Colour: Grey PC 3M Scotchgard AF Coated Lens. Blue/Black Frame
Code: 293252 Each £7.60
• Colour: Amber PC 3M Scotchgard AF Coated Lens. Blue/Black Frame
Code: 293253 Each £7.60
• Colour: Amber PC 3M Scotchgard AF Coated Lens. Green/Black Frame
Code: 293257 Each £7.60
3M Solus 1000 Series Foam Insert
• Optional vented foam gasket for reduced exposure for use with 3M Solus
1000 Series Protective Eyewear
Code: 293258 Each £2.57
3M Solus 1000 Series Headband
• Optional comfort elastic strap for use with 3M Solus 1000 Series
Protective Eyewear
Code: 293259 Each £2.32

Modern Safety Spectacles
ANTI
MIST
Bollé Contour Metal Frame Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Spring joints
• Integral brow bar
• Optical class 1 polycarbonate lenses
• Integrated side shields
• 160° flex sports temples with spring joints
• Exceptional field of view of over 180º
• Non-slip adjustable bridge
• Platinum anti-scratch/anti-mist lens
• Supplied with microfibre pouch
• Colour: Clear anti-scratch/anti-mist lens, Gun metal frame
Code: 292931Each £9.90
• Colour: Smoke anti-scratch/anti-mist lens, Gun metal frame
Code: 292933Each £10.75
• Colour: ESP anti-scratch lens, Gun metal frame
Code: 292932Each £11.40
Eye & Face Protection
ANTI
MIST
Grey
uvex sportsyle
Conforms to EN 1F KN CE
• Close fitting, athletic design - look good, be safe
• Low weight - just 23g for incredible comfort
• Contoured lens fits all facial shapes
• Soft grip side arms, nose bridge and brow for non-slip comfort
• uvex permanent lens coating technology: anti-fog coating on
the inside and scratch resistant on the outside
• Equally good for sports activities
• 100% UV protection
• Colour: Clear lens
Code: 431414Each £6.50
Conforms to EN 166 1F KN CE, EN 172
• Colour: Grey Sunglare lens
Code: 431415Each £ 6.50
Keep Safe 553 Zero Noise Safety
Spectacles K Rated
Conforms To EN 166 1. FT. K
The innovative Keep Safe 553 Zero Noise is equipped with
patented temples specially designed to facilitate the combined
use with hearing protection devices: the shorter terminals and
the reduced sections cancel the interference with cushions
avoiding the ear muff loses part of its attenuation capacity.
• Flexible and shaped temples allows the operator to wear the
glasses without having to remove the ear muffs
• Wrap-around model, guarantees optimal lateral protection
• Light and handy, made entirely in polycarbonate, weight only
19g
• Temples with reduced section designed for a perfect interaction
with ear muffs
• Colour: Clear anti-scratch lens
Code: 293203Each £2.99
• Colour: Solar (The natural vision solar) anti-scratch lens
Code: 293204Each £3.49
Solar GI5
Honeywell Millennia Sport Safety Spectacles
CONFORMS TO EN 166 1.F AND EN 170
• Lightweight – 33g
• Sleek design – translucent brow
• 3D curved temples
• Comes with neck cord
• Single piece polycarbonate lens
• Colour: Clear anti-scratch lens, Teal frame
Code: 293551Each £5.49
• Colour: Grey with anti-scratch lens, Black frame
Code: 293567 Each £5.99
133

Eye & Face Protection
Modern Safety Spectacles
ANTI
MIST
uvex winner
Conforms to EN 1F KN CE
• Close fitting metal frame spec offering high levels of protection and a wide field
of vision
• Anti-fog coating on the inside and scratch resistant on the outside, plus antistatic
• Sprung side arms gently grip the head for secure pressure free fit
• Hinged nose pads allow wearers to achieve individual fit
• 100% UV protection
• Colour: Clear Lens
Code: 293263Each £7.90
Conforms to EN 166 1F KN CE, EN 172
• Colour: Grey Sunglare lens
Code: 293260 Each £7.90
ANTI
MIST
134
134
uvex pheos
Conforms to EN 166 1F KN CE
• Available in two sizes, the small version is 8mm narrower than the standard
version. Ideal for smaller faces
• uvex permanent lens coating technology: anti fog coating on the inside and
scratch resistant on the outside
• The frameless, duo-spherical lens with integral brow guard gives additional eye
coverage for increased protection
• The side arms combines hard and oft materials which grip the head for a secure,
stable and comfortable fit
• Low profile side arms enhances compatibility with other items of PPE
• Colour: Clear lens. Green/Black frame
Code: 256432 Standard Each £4.85
Code: 431410 Small Each £4.85
• Amber lens. Yellow/Black frame
Code: 256433 Standard Each £4.85
Code: 431411 Small Each £4.85
Conforms to EN 166 1F KN CE, EN 172
• Colour: Grey Sunglare lens. Grey/Black frame
Code: 256434 Standard Each £4.85
Code: 431412 Small Each £4.85
Conforms to EN 166 1F KN CE, EN 172
• Colour: Silver Mirror Lens. Black frame
Code: 256435 Standard Each £7.24
Code: 431413 Small Each £7.24

Modern Safety Spectacles
Bollé Galaxy Safety
Spectacles with LED
Lights
Conforms to EN 166 and EN 170 and EN 172 1FT
• Providing the wearer with protection and light
• Close fitting safety spectacle
• Tip Grip temples
• Integrated brow bar and non-slip bridge
• Super bright integrated LED lights
• LED lights are perfectly positioned and can easily and quickly
be turned on and off as required
• LED’s run on replaceable batteries
• Optical class 1 polycarbonate lenses
• Anti-scratch and anti-mist polycarbonate lens
• Supplied with microfibre lens cloth
• Colour: Clear anti-scratch/anti-mist lens, Black frame
Code: 292930Each £12.95
Super Bright
LED Lights
ANTI
MIST
Eye & Face Protection
Bollé Cobra Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Ultimate wrap around comfort
• Co-injected non-slip pivoting sports temples
• Non slip bridge
• 180° panoramic field of view
• Platinum anti-scratch and anti-fog
• Optical class 1 polycarbonate lens
• Supplied with a free sports cord
• Colour: Clear anti-scratch HD Hydrophobe lens, Black temples
Code: 292975Each £8.49
• Colour: Smoked anti-scratch/anti-mist lens, Black temples
Code: 292954Each £8.49
• Colour: Yellow anti-scratch/anti-mist lens, Black temples
Code: 292974Each £8.49
ANTI
MIST
Smoked
Yellow
Bollé Silium Metal Frame Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Optimal protection and panoramic vision
• Anti-scratch and anti-mist
• Optical class 1 polycarbonate lens
• Integrated side shields
• 160° flex sports temples with spring joints
• Soft adjustable non-slip nose pads
• Tip Grip system for improved fit
• Colour: Clear anti-scratch/anti-mist lens, Silver frame
Code: 292908Each £7.45
• Colour: Smoked anti-scratch/anti-mist lens, Silver frame
Code: 292909Each £8.10
ANTI
MIST
Smoked
135

Eye & Face Protection
Modern Safety Spectacles
ANTI
MIST
ANTI
MIST
Twilight
Smoked
Bollé Rush Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Close fitting base 9 wrap design
• Non-slip and adjustable bridge and temples
• Lightweight – 25g
• Optical class 1 polycarbonate lenses in a variety of lens
options
• Panoramic field of view
• Supplied with sports cord
• Colour: Clear anti-scratch HD lens, Clear temples
Code: 293009 Each £7.96
• Colour: Twilight lens, anti-scratch/anti-mist, Twilight temples
Code: 293024 Each £5.02
• Colour: Smoked lens, anti-scratch/anti-mist, Smoked temples
Code: 293023 Each £5.02
Bollé Prism Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Sport design
• Comfortable straight temples
• Supplied with sports cord
• Colour: Clear anti-scratch/anti-mist lens, Black temples
Code: 431284 Each £4.10
• Colour: Smoked anti-scratch/anti-mist lens, Black temples
Code: 431285 Each £4.50
ANTI
MIST
Bollé Viper Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Ultra modern, ultra lightweight, sports style wrap
• Ultra close fitting protection
• Panoramic vision
• Adjustable temples
• Integrated side shields
• Neck cord
• Colour: Clear anti-scratch/anti-mist lens, Blue/Black temples
Code: 292963Each £5.70
• Colour: Smoked anti-scratch/anti-mist lens, Black temples
Code: 292956Each £6.30
• Colour: Yellow anti-scratch/anti-mist lens, Black temples
Code: 292973Each £6.70
136
136
ANTI
MIST
uvex i-3
Conforms to EN 166 1F KN CE
• uvex permanent lens coating technology: anti fog coating on
the inside and scratch resistant on the outside
• Side arm flex zones allow the spectacles to adapt to any head
width - fitting narrow or wider faces equally well
• Soft flex temple ends firmly grip the side of the head for a
secure pressure free fit
• Extremely soft nose bridge pads ensure non-slip, comfortable fit
• 100% metal free for reduced weight and robustness
• 100% UV protection
• Colour: Clear lens. Black/Blue frame
Code: 256445 Each £9.80
• Colour: Amber lens. Black/Yellow frame
Code: 256439 Each £9.80
Conforms to EN 166 1F KN CE, EN 172
• Colour: Grey Sunglare lens. Black/Red frame
Code: 256440 Each £9.80
Conforms to EN 166 1F KN CE, EN 172
• Colour: Silver Mirror lens
Code: 431409 Each £13.20
• Colour: Clear lens, anti reflective both sides.
Grey/Pale Blue frame
Code: 431408 Each £28.50

Modern Safety Spectacles
ANTI
MIST
ANTI
MIST
Bollé Slam High Visibility Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Modern design
• Ultra enveloping
• Panoramic field of view
• Stylish, easy-to-wear – tailored to night work
• High visibility reflective temples – user seen in dark
• Optical class 1
• Supplied with a free sports cord
• Colour: Clear anti-scratch/anti-mist lens, High visibility temples
Code: 293021 Each £6.70
Bollé Axis Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Athletic styling
• Wrap-around protection
• Integrated side shields
• Panoramic optical class 1 polycarbonate lens
• Unique soft adjustable non slip nose pads
• Co-injected Tip Grip pivoting temples for improved fit and comfort
• Colour: Clear anti-scratch/anti-mist lens, Grey temples
Code: 292924 Each £7.00
• Colour: Smoked anti-scratch/anti-mist lens, Grey temples
Code: 430685 Each £7.60
• Colour: Contrast anti-scratch/anti-mist lens, Grey temples
Code: 292929 Each £7.60
Eye & Face Protection
MAIN FEATURES
Bespoke with your company logo and
branding colours
Contact your local branch for details
Keep Safe Hornet Safety Spectacles
Conforms To EN 166 1. FT
• Anti-scratch and anti-mist lens (G15 solar lens is anti-scratch only)
• Modern design
• Extremely lightweight for comfort even during prolonged use
• Temples made with over-moulding technology for an excellent fit
• Wrap-around lens with integrated side shields
• Eyebrow protection
• Colour: Clear anti-mist/anti-scratch lens
Code: 293170 Each £6.49
• Colour: Smoked anti-scratch lens
Code: 293169 Each £6.99
ANTI
MIST
GI5 Solar
Your company
logo here
137

Eye & Face Protection
Modern Safety Spectacles
A single model for thousands of faces?
conseil
Photos : F. Bourcier
IRI-s
see page 129
INVENTED BY BOLLÉ SAFETY, DESIGNED FOR EVERY FACE.
Cheekbones, flat forehead, crooked nose... IRI-s, the first universal safety spectacle
that fits perfectly to each face: a “memory form” bridge, fully adjustable in height,
depth and width, an ultra-enveloping frame with pivoting ergonomic temples,
embraces precisely all face shapes.
PLATINUM coated (new anti-scratch and anti-fog KN coatings), clear, smoke or twilight
versions, with or without diopter, they ensure optimal protection.
Need to combine comfort and aesthetics, with one model and one size IRI-s, the
Bollé Safety innovation, stands out as the single reference for all faces.
Clear version
Smoke version
28 g
bolle-safety.com
138
138

Modern Safety Spectacles
ANTI
MIST
Bollé Slam Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Ultra modern, ultra lightweight, sports style wrap
• Ultra close fitting protection
• Panoramic vision
• Sports temples
• Integrated side shields
• Neck cord
• Colour: Clear anti-scratch lens/anti-mist lens, Black temples
Code: 293018 Each £4.44
• Colour: Smoked anti-scratch lens/anti-mist lens, Black temples
Code: 293020 Each £5.14
• Colour: Yellow anti-scratch/anti-mist lens, Black temples
Code: 293017 Each £5.14
• Colour: ESP anti-scratch lens, Black temples
Code: 293019 Each £5.46
Eye & Face Protection
Smoked ESP Yellow
ANTI
MIST
Bollé Mamba Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Lightweight, close fitting wrap with co-injected sports temples,
non-slip bridge
• 9 dioptre base curve – fantastic field of view
• Excellent comfort and fit
• Neck cord
• Colour: Clear, anti-scratch/anti-mist lens, Black/Grey temples
Code: 292919 Each £5.91
• Colour: Yellow anti-scratch lens, Translucent temples
Code: 431524 Each £6.55
• Colour: Smoked anti-scratch/anti-mist lens, Black/Grey temples
Code: 292907Each £6.55
ANTI
MIST
Bollé Bandido Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Lightweight
• Sports style wrap
• Excellent panoramic field of view
• Optical class 1 polycarbonate lens
• Integrated side shields
• Supplied with a sports neck cord
• Colour: Clear anti-scratch/anti-mist lens, Clear temples
Code: 293503 Each £3.65
• Colour: ESP anti-scratch lens, Translucent temples
Code: 293500 Each £4.55
• Colour: Smoked anti-scratch/anti-mist lens, Smoked temples
Code: 293506Each £4.25
• Colour: Yellow anti-scratch/anti-mist lens
Code: 431673Each £4.25
139

Eye & Face Protection
Modern Safety Spectacles
ANTI
MIST
3M SecureFit 200 Series Safety
Spectacles
CONFORMS TO EN 166.1FT AND EN 170
• Iinnovative 3M Pressure Diffusion Temple Technology
– superior comfort, security of fit
• Temples self adjust – fit wide array of head shapes
• Reduces slippage during workplace head movement
• One of the lightest on the market – only 18g
• Ideal for wide range of industries
• Colour: Clear anti-mist/anti-scratch lens, Translucent
sidearms
Code: 293148Each £3.99
ANTI
MIST
Honeywell A800 Safety Spectacles
CONFORMS TO EN 166 1.F AND EN 172
• Sporty styling and a slim profile – an ideal fit for workers
with smaller faces
• Soft temples, extra flex – greater comfort
• Light silver mirrored lens
• For both indoor and outdoor work applications
• Colour: Clear anti-mist/anti-scratch lens, Translucent frame
Code: 293589Each £4.99
• Colour: Grey anti-mist/anti-scratch lens, Grey frame
Code: 293036Each £5.99
• Colour: Silver (in/out) anti-scratch lens, Grey frame
Code: 293587Each £6.49
140
140
Keep Safe Spitfire 2 Safety Spectacles
CONFORMS TO EN 166 1.F AND EN 170
• Anti-scratch and protection against UV400 lens
• Extremely light and encircling
• Elastic structure, extremely flexible and resistant
• New temple for a better ergonomic fit
• Optimal comfort and fit thanks to the soft adjustable nose
pad
• Neck cord included in the packaging
• Colour: Clear anti-scratch lens
Code: 293166 Each £5.49
CONFORMS TO EN 166 1.F AND EN 172
• Colour: Smoked anti-scratch lens
Code: 293167 Each £5.99

Modern Safety Spectacles
ANTI
MIST
Bollé B-line BL10 Safety Spectacles
Conforms to EN 166 and EN 170 and EN 172 1FT
• Optical class 1 anti-scratch polycarbonate lens and temples
• Supplied with a free sports cord
• Lightweight
• Colour: Clear anti-scratch lens
Code: 293519 Each £2.60
• Colour: Smoked anti-scratch lens
Code: 430684 Each £2.85
Keep Safe Phantom Safety Spectacles
Conforms to EN 166 1.F
• One piece, frameless polycarbonate lens
• Lightweight
• Anti-scratch
• Comfortable nose bridge
• Adjustable side arms
• Colour: Clear anti-scratch lens, Black frame
Code: 293150 Each £3.99
Eye & Face Protection
ANTI
MIST
3M Tora Safety Spectacles
Conforms to EN 166 1.FT and EN 170
• Contoured, wrap-around, with integrated browguard –
good energy absorption
• Excellent eye coverage
• Polycarbonate lens
• Adjustable, detachable neck cord
• Colour: Clear anti-mist/anti-scratch lens, Translucent sidearms
Code: 292893Each £3.49
Keep Safe Jaguar Safety Spectacles
Conforms to EN 166 1.F
• Modern, lightweight style
• Scratch-resistant polycarbonate lens
• Colour: Clear anti-scratch lens, Translucent sidearms
Code: 293221Each £1.99
• Colour: Smoked anti-scratch lens, Black translucent sidearms
Code: 292980 Each £1.99
• Colour: Yellow anti-scratch lens, Yellow translucent sidearms
Code: 293224Each £1.99
ANTI
MIST
Yellow
Smoked
141

Eye & Face Protection
Traditional & Over Spectacles
Bollé Overlight
Conforms to EN 166 AND EN 170 1FT
• New generations OTG (over the glases)
• Fits over all standard prescription frames
• Compact and lightweight
• Pivoting temples
• Optical class 1 polycarbonate lens
• Anti-scratch and anti-fog
• Colour: Clear lens. Clear wrap-around frame
Code: 292925Each £4.53
Keep Safe Lightning Safety Spectacles
CONFORMS TO EN 166 1.F
• Wide vision, lightweight wrap-around
• Scratch-resistant polycarbonate lens
• Built-in browguard adjustable sidearms
• Colour: Clear lens anti-scratch, Blue frame
Code: 293158Each £2.99
Keep Safe Concorde Safety Spectacles
CONFORMS TO EN 166 1.F
• Ultra lightweight, with adjustable length sidearms
• Polycarbonate single lens construction
• Built-in browguard
• Colour: Clear lens anti-scratch, Blue sidearms
Code: 293146Each £1.99
Keep Safe Hurricane Safety Spectacles
CONFORMS TO EN 166.1.Ft
• Economical single polycarbonate wrap-around lens
• Moulded browguard
• Vented side shields
• Colour: Clear lens, Clear frame
Code: 293144Each £1.49
Keep Safe Traditional Safety Visitor Over Spectacles
ANTI
MIST
142
142
Keep Safe 5X7 Safety Over Spectacles
CONFORMS TO EN 166 KN
• The ultimate overspec to prescription spectacles
• The careful design of the frame prevents the overlapping of the temples
for an absolute comfort
• SoftPad technology
• Adjustment of temples in length
• Wide range of filters
• Colour: Clear anti-scratch/anti-mist K & N rated lens
Code: 293201Each £9.49
Keep Safe Hunter Safety Visitor Over Spectacles
CONFORMS TO EN 166 1.FT
• Deep box style front profile – for wearing over all sizes of prescription eyewear
• Polycarbonate lens
• Fully vented sideshields
• Ideal as visitors safety spectacles
• Colour: Clear lens, Clear frame
Code: 293157Each £2.99

Goggles With Attachable Visors
ANTI
MIST
Bollé Atom Safety Goggle K & N Rated
Conforms to EN 166 and EN 170 1BT 3,4,5 KN
• Compact, lightweight and ultra comfortable
• TPR flexible frame
• Wide field of view
• Wide adjustable strap adds to the comfort
• Fits over prescription spectacles
• Prescription insert is also available
• Tear off lens protectors
• Sealed version (Ventilated version available)
• Colour: Clear Platinum anti-scratch/anti-mist lens, blue frame
Code: 293002Each £8.03
Visor to fit Bollé Atom goggles
• Optional face visor is fitted the Atom doubles up as a face shield
Code: 293004Each £6.08
Eye & Face Protection
ANTI
MIST
Bollé Blast Safety Goggle
Conforms to EN 166 and EN 170 1BT 3,9
• Unique shape of the goggle ensures a perfect fit with all respirators and with the
face providing maximum comfort and protection
• Fits over prescription spectacles
• Fitted with a wide pivoting adjustable headband
• Optical class 1 polycarbonate lens
• Anti-scratch and anti-mist
• Overflow chute for liquids
• Provides protection against impact, chemicals, dust, gas and molten metal
• Available in vented, sealed and foam versions
• Ventilated version (Sealed version available)
• Colour: Anti-scratch/anti-mist, clear lens, Blue frame
Code: 292999Each £9.55
Bollé Blast Visor (For Use With Bollé Blast Goggle)
CONFORMS TO EN 166 B
• Fits to all versions of the Blast goggle
• When combined serves the same purpose as a visor but provides even more
protection for the wearer’s eyes
Code: 293000Each £6.20
Keep Safe 6X3 Vented Safety Goggle
CONFORMS TO EN 166 KN 3,4,9
The originality of the Keep Safe 6X3 model is expressed in the design of
the facial support that ensures a proper seating of respiratory masks and
half masks and for the use of additional facial protection that provides total
protection to the operator’s face.
• Panoramic lens can be perfectly worn over prescription glasses
• Exclusive UDC coating
• Facial support compatible with half masks
• Additional facial protection
• Indirect ventilation system ensures certified protection against drops and
splashes
• Category III PPE
• Impact resistance at 432 km/h, even at extreme temperatures
• Protects aginst liquid droplets, Dust, Gas and Molten Metals
• Colour: Clear anti-scratch/anti-mist lens K & N Rated
Code: 256100Each £12.49
Keep Safe Visor to suit 6X3 Goggle.
Code: 256101Each £5.99
ANTI
MIST
143

Eye & Face Protection
Hybrid Goggles/Spectacles
ANTI
MIST
ANTI
MIST
Bollé Cobra TPR Goggle K & N Rated
Conforms to EN 166 and EN 170 1BT 3,4,5 KN
• Ultra low profile goggle
• 1 neoprene strap and TPR seal
• Easy sterilized, non-absorbent material
• Non-slip bridge
• 180 o panoramic field of view
• Optical Class 1 polycarbonate
• Supplied with a free mirco fibre pouch
• Colour: Clear Platinum anti-scratch/anti-mist K & N rated lens
Code: 431288Each £10.50
Bollé Cobra Hybrid Safety Spectacle K & N Rated
Conforms to EN 166 and EN 170 1FT KN
• Ultra-purpose all rounder
• A unique concept that offers the comfort of a safety spectacle with the fit and
seal of a goggle
• Adaptability of a fully adjustable and interchangeable strap and temples
• Co-injected non-slip pivoting sports temples
• Non slip bridge
• 180° panoramic field of view
• Platinum anti-scratch and anti-fog
• Optical class 1 polycarbonate lens
• Supplied with a free micro fiber pouch
• Colour: Clear anti-scratch/anti-mist K & N rated lenses
Code: 292971Each £9.52
ANTI
MIST
Bollé Cobra Hybrid Safety Goggle With A Strap K & N
Rated
Conforms to EN 166 and EN 170 1BT 3 KN
• Ultra low-profile goggle
• 180º panoramic field of view
• Eyeshield with fit and seal of a goggle
• Soft foam seal, wide adjustable strap
• Non-slip bridge
• Microfibre pouch
• Colour: Clear anti-scratch/anti-mist K & N rated lens
Code: 292972Each £9.96
144
144
ANTI
MIST
Keep Safe 6X1 Hybrid Safety Goggle
CONFORMS TO EN 166 KN 3.4
Perfect hybrid goggle combines the comfort and lightness of an eyewear with
the advantages of a traditional goggle. The adjustable temples with SoftPad
are interchangeable with the elastic band, offering complete versatility; the
special design of the rubber leaning on the face ensures a protection certified in
accordance with points 3 and 4 of EN 166 standard.
• Wide lens for a field of view without distortion
• Sophisticated indirect ventilation system
• Soft internal rubber for comfort without local pressure
• Certified according to EN166 point 3 (droplets and splashes) and point 4 (large
dust particles)
• Colour: Clear anti-scratch/anti-mist lens K & N rated lens
Code: 256104Each £14.99

Eye & Face Protection
145

Eye & Face Protection
Faceshields
Bollé Sphere Faceshield
Conforms to EN 166 and EN 170 1AT 3,8,9
• Lightweight, flip-up face shield
• Easy to replace polycarbonate optical class 1 visor
• Excellent 180° vision
• Zytel headgear (made from a mix of fibreglass, nylon and PVC)
• Fully adjustable head harness and browguard offering durability flexibility to fit
all head shapes and sizes
• Spare visor available
• Universal safety helmet attachment available
Code: 293011Each £16.58
Bollé Sphere Spare Polycarbonate Visor
Conforms to EN 166 and EN 170 1AT 3,8,9
• Colour: Clear
Code: 293012 Each £8.29
Bolle BL20 flip-up Face Shield BL20PI
conforms to EN 166 1B
• At only 254 grammes this is lightweight and impact resistant
• Face shield - polycarbonate flip-up
• Dimensions face shield - 220mm x 390mm
• Blue brow guard that protects the front of the head
• Polycarbonate lens to protect against impacts.
• With three adjustable ratchets making - comfortable and outstanding value
Code: 431671 Each £6.15
Bollé BL20 Helmet Adaptor For Faceshield
Conforms to EN 1731
• Easy to replace optical class polycarbonate visor
• Universal safety helmet attachment also available
• Colour: Clear
Code: 431526 Each £6.16
Bollé BL20 Replacement Clear Polycarbonate Visor
CONFORMS TO EN 166 1B
• Colour: Clear
Code: 293015 Each £3.20
Honeywell Sb600 Supervizor Browguard
CONFORMS TO EN 166 B 3.9
• Polycarbonate browguard with ratchet headband
• Full wrap-around visor
• Colour: Grey
Code: 254666 Each £13.99
Honeywell Sv9pc Supervizor Polycarbonate Visor
(Not illustrated)
CONFORMS TO EN 166 1-B 3.9
• 230mm clear polycarbonate visor
Code: 254596Each £8.99
146
146
Honeywell Sv9ac Supervizor Acetate Visor
CONFORMS TO EN 166 1-F.3
• 200mm clear acetate visor
Code: 254591Each £7.99

Faceshields
Keep Safe Modular Faceshield Unit
CONFORMS TO EN 166 1-B.3.9
• Rigid polypropylene
• Ratchet head harness
• Browguard only
• Colour: Blue
Code: 290401Each £8.49
Keep Safe Acetate Visor
CONFORMS TO EN 166 1-F.3
• Low energy impact
• Size: 20cm (8") bound
Code: 254262Each £11.49
Keep Safe Polycarbonate Visor
CONFORMS TO EN 166 1-B.3.9
• Medium energy impact
• Size: 20cm (8") bound
Code: 254261 Each £7.49
Eye & Face Protection
Keep Safe Essential Faceshield
CONFORMS TO EN 166.1.B.3.9
• Browguard
• Elasticated headband
• Unbound 20cm (8") clear polycarbonate visor
Code: 290430Each £10.49
Keep Safe Spare Faceshield Visor
(Not illustrated)
CONFORMS TO EN 166.1.B.3.9
• Size: 20cm (8") polycarbonate visor
Code: 290431Each £5.49
Honeywell Cv84a Clearways Acetate Visor
CONFORMS TO EN 166 1-F.3
• 200mm clear acetate visor
Code: 290371Each £5.99
Honeywell Cb14 Clearways Browguard
CONFORMS TO EN 166 B 3
• Browguard
• Elasticated headband
• Colour: Grey
Code: 290338Each £7.99
Honeywell Cv83p Clearways Polycarbonate Visor
(Not illustrated)
CONFORMS TO EN 166 1-B 3
• 200mm clear polycarbonate visor
Code: 290372Each £6.49
Keep Safe M510 Chinguard Facesaver with
Polycarbonate Visor
CONFORMS TO EN 166 1-B.3.9
• For protection against Liquid Splash and Molten Metal
• Use when grinding, fettling and sandblasting
• Polycarbonate browguard and chinguard 20cm (8") polycarbonate visor
Code: 431502 Each £18.49
• Replacement visor for M510
• Size: 20cm (8") polycarbonate visor
Code: 431503 Each £7.99
147

Eye & Face Protection
Vented Goggles
Bollé Pilot Vented Safety Goggle K & N Rated
Conforms to EN 166 and EN 170 1BT 3,4 KN
• Ultra flexible co-injected TPR housing for increased comfort
• Wide fully adjustable strap guarantees the wearer optimum levels of fit and
comfort
• Toric optical class 1 polycarbonate lens
• Excellent field of view
• Fits over prescription spectacles
• Also available in Smoke and CSP
Code: 292923 Each £11.10
Bollé Baxter Vented Safety Goggle K & N Rated
Conforms to EN 166 and EN 170 1BT 3,4,5 KN
• Provides the comfort of a safety spectacle with the fit and seal of a goggle
• Interchangeable foam seal which gives added brow and cheek protection
• Fully adjustable strap that can also be removed
• Straight sports temples
• Optical class 1 polycarbonate lens
• Platinum anti-scratch and anti-fog lenses
• Wrap around base 8 curve
• Fantastic field of view and side ventilation
• Prescription version also available
Code: 431544 Each £10.35
Bollé Coverall II Vented Safety Goggle
Conforms to EN 166 and EN 170 1BT 3,4
Polycarbonate, vented
• Cost effective goggle
• Sealed PVC frame
• Protection against impact, chemicals, large and fine dust particles
• Anti-scratch and anti-fog
• Optical class 1 polycarbonate lens
• Fits over prescription spectacles
Code: 431545Each £5.15
ANTI
MIST
Bollé X90 Low Profile Indirect Vented Safety Goggle
Conforms to EN 166 1BT
• Small, ultra compact goggle
• All enveloping flexible PVC frame
• Panoramic field of view
• Indirect ventilation
• Optical Class 1 polycarbonate
• Wide strap enhances the comfort and fit
• Colour: Anti-scratch/anti-mist, clear lens, clear frame
Code: 292926 Each £9.25
ANTI
MIST
Keep Safe Avenger Indirect Vented Safety Goggle
K & N Rated
CONFORMS TO EN 166 KN 3.4.9
• Linear and compact design
• Can be worn over any prescription spectacles thanks to its spherical lens
• Indirect ventilation system
• Wide, fully adjustable headband
• Category III PPE
• Colour: Clear anti-scratch/anti-mist K & N rated lens
Code: 256109 Each £7.49
148
148
ANTI
MIST
Keep Safe Impact Direct Vent Safety Goggle
CONFORMS TO EN 166 1-B
• Colour: Clear lens
Code: 256175Each £1.99
• Colour: Clear Anti-Mist lens
Code: 256115 Each £3.49

Vented Goggles
Bollé Atom Safety Goggle K & N Rated
Conforms to EN 166 and EN 170 1BT 3 KN
• Compact, lightweight and ultra comfortable
• TPR flexible frame
• Wide field of view
• Wide adjustable strap adds to the comfort
• Fits over prescription spectacles
• Prescription insert is also available
• Tear off lens protectors
• Ventilated version (Sealed version available)
• Colour: Clear Platinum anti-scratch/anti-mist lens, blue frame
Code: 293001 Each £8.03
uvex ultravision goggle
Conforms to EN 166 1B 349 KN CE
• Panoramic field of vision
• uvex permanent lens coating technology: anti-fog, scratch resistant, anti-static
and 100% UV protection on both sides of the lens
• Lens coatings increase safety and prolong product life
• Wide fully adjustable head strap fits all sized heads providing a secure pressure free fit
• Can be worn comfortably over most prescription spectacles
• Clear lens – suitable for most light environments • 100% UV protection
• Colour: Clear lens
Code: 256424Each £9.44
Eye & Face Protection
Scott Safety Luna Direct Vented Goggle
CONFORMS TO EN 166
• Stylish and economical
• Lightweight and flexible
• General purpose goggle
• Compatible with other PPE
• Colour: Clear lens
Polycarbonate Direct Vented
Code: 431248Each £2.70
Acetate, Bottom Vent Only
Code: 431249Each £3.85
Scott Safety Bora Indirect Vented Goggle
CONFORMS TO EN 166
• Polycarbonate Indirect Vented
• Lightweight and compact
• Idea for smaller face size
• Colour: Clear
Code: 431245 Each £7.95
Scott Safety Gravitation Indirect Vented Goggle
CONFORMS TO EN 166
Polycarbnate Indirect vented
• Lightweight and low profile
• Provides a wide field of vision and excellent compatibility with PPE
• Colour: Clear
Code: 431246 Each £6.85
3M Goggle Gear 500 Clear
PC Scotchgard AF Coated Lens
CONFORMS TO EN 166
• NEW: Stylish, lightweight goggle offering great fit and comfort
• Features superior 3M Scotchgard Anti-Fog Coating for reliable protection;
outperforms the requirements of the EN166 N marking by 5x* (* Based on 3M
internal testing per EN168 test method)
• Low-profile design for improved compatibility with adjacent PPE
• BT impact protection and optical clarity class 1
• Adjustable comfort strap and optional prescription insert (FT impact protection)
Code: 293248 Each £12.20
3M Goggle Gear 500 Prescription Insert
CONFORMS TO EN 166
• Optional prescription insert (FT impact protection) for use with 3M Goggle Gear
500 Series
Code: 293249 Each £6.10
149

Eye & Face Protection
Non-vented Goggles
ANTI
MIST
Bollé Attack Safety Goggle
Conforms to EN 166 and EN 170 1BT 3,4,5,9
• Patented design
• Unique “comfort zone” cushions the frame of the goggle against the face
providing maximum comfort and protection
• Fits over prescription spectacles
• Fitted with a wide adjustable headband
• Optical Class 1 polycarbonate lens
• Provides protection against impact, chemicals, dust and molten metal
• Colour: Anti-scratch/anti-mist clear lens, crystal frame
Code: 293247Each £9.25
3M 2890S Safety Goggle K & N Rated
CONFORMS TO EN 166 1 B 3.4.5.9 KN
Polycarbonate, non-vented - 2C-1.2 3M 1 K N BT 9
• Strong polycarbonate lens with anti-scratch coating for durability and anti-fog
coating for extra convenience and visual clarity
• Optical Class 1 for visual clarity
• Modern slim-line and lightweight design for an excellent fit
• Easy-to-adjust strap for stable and comfortable wear
• Good fit with 3M half-mask respirators
• Colour: Clear anti-scratch/anti-mist k & n rated lens
Code: 256131Each £9.49
ANTI
MIST
ANTI
MIST
150
150
uvex ultrasonic goggle
Conforms to EN 166 1B 349 KN CE
• Based on a ski goggle design: extremely lightweight and excellent field of
vision
• uvex permanent lens coating technology: anti-fog coating on the inside and
scratch resistant on the outside
• Lens coatings increase safety and prolong product life
• The innovative frame combines hard/soft materials creating soft effective
seal around eyes. High levels of comfort and protection
• Soft material aids compatibility with other items of PPE
• Wide fully adjustable head strap - secure pressure free fit
• Can be worn over most prescription spectacles
• 100% UV protection
• Optical class 1 – for the best optical quality
• Colour: Clear lens. Orange/Grey frame
Code: 256426Each £10.35
Conforms to EN 166 1B 349KN CE, EN 172
• Colour: Brown Sunglare lens
Code: 431416 Each £10.85

Non-vented Goggles
Bolle Coverall Goggle
Conforms to EN 166 and EN 170 1BT 3,4,5 KN
• Sealed PVC frame
• Protection against impact, chemicals, large and fine dust particles
• Platinum double sided anti-scratch and anti-fog
• Optical class 1 polycarbonate lens
• Adjustable nylon strap
• Fits over prescription spectacles
• Cost effective and functional
Code: 431672Each £6.35
Bolle Blast Goggle
Conforms to EN 166 and EN 170 1BT 3,4,5,9
• Unique shape of the goggle ensures a perfect fit with all small respirators
• Provides maximum comfort and protection for the face
• Fits over prescription spectacles
• Fitted with a wide pivoting adjustable headband
• Optical class 1 polycarbonate lens
• Double sided anti-scratch and anti-fog lens
• Overflow chute for liquids
• The Blast goggle provides protection against impact, chemicals, dust, gas
and molten metal
• Sealed version (Ventilated version available)
Code: 431699Each £9.55
Eye & Face Protection
Scott Safety Neutron Goggle
CONFORMS TO EN 166
• Modern, lightweight and low profile
• Offers a panoramic field of vision
• Compatible with other forms of PPE
• Stylish aesthetics and all day comfort e
• Colour: Clear
Code: 431241 Each £8.75
Scott Safety Neutron Shade Welding Goggle
CONFORMS TO EN 166
• Shade 5 non-vented Polycarbonate goggle
• Modern, lightweight and low profile
• Panoramic field of vision
• Compatible with other forms of PPE
Code: 431247 Each £15.95
Scott Safety Luna Goggle
CONFORMS TO EN 166
• Stylish and economical
• Lightweight and flexible
• General purpose goggle
• Compatible with other PPE
• Colour: Clear lens
Code: 431249Each £3.85
ANTI
MIST
Keep Safe Gas Tight Safety Goggle
CONFORMS TO EN166 1. B 3.4.5.9
• Protects against gases, liquid droplets and flying particles
• Non-vented body
• Forms sealed unit on face
• Tough coated polycarbonate anti-mist lens
• Suitable for molten metal
• Colour: Clear anti-mist lens
Code: 256130 Each £5.49
151

Eye & Face Protection
Safety Eyewear Accessories
Current PPE directives state that employers who issue employees with PPE must
also provide facilities for effective maintenance and storage of the equipment.
uvex lens cleaning station
• Helps prolong product life and increase safety
• Complete station includes:
– 4 boxes - non abrasive lens cleaning tissues
– 1 x 16oz bottle of cleaning fluid
– Mirror
• Dimensions: 340mm(w) 480mm (L) 165mm(H)
Code: 293464Each £54.37
uvex replacement cleaning solution
• Content - 16fl oz
Code: 293457Each £4.18
uvex replacement cleaning tissues
• Approx. 450 sheets
Code: 293465Each £3.77
uvex cleaning towelettes
• 100 moist silicone free cleaning tissues
• Individually wrapped – ideal for cleaning
eyewear on the go
Code: 293456Each £11.63
uvex neck hanging cord
• Offers ease of use especially for those that may pass
through areas of mandatory eyewear
• Universal fitting
Code: 431417Each £1.90
uvex polyester spectacle bag
• Protects specs when not in use
Code: 431418Each £1.35
152
152
uvex polyester goggle bag
• Ideal for storing goggles when not in use
Code: 293459Each £1.84
uvex zipper spectacle pouch
• Robust spectacle case with reinforced zipper and
Velcro belt loops
• Additional space for spare lenses
Code: 015448Each £4.28
uvex zipper goggle pouch
• Large and very robust goggle case with zipper and
belt loop. Additional space for spare lens
Code: 431419Each £9.85

Safety Eyewear Accessories
Bollé B100 Lens Cleaning Wipes
• 100 individually wrapped lens cleaning wipes
Code: 293034 Pack of 100 £7.83
Bollé B500 Lens Cleaning Wipes
• Wall mountable lens cleaning wipe dispenser
• 500 individually wrapped lens cleaning wipes
Code: 292814 Pack of 500 £38.16
Bollé Lens Cleaning Station
• Lockable metal, wall mounted 500ml anti-static
lens cleaner
• Replacement lens cleaners and tissues also
available (292992)
• 400 lens cleaning tissues
• Cleans all types of lenses
Code: 292990 Each £86.59
Eye & Face Protection
Bollé Spectacle Fit Case with Belt
Loop
• Large black flexible polyester fit case with belt
loop
Code: 431525 Each £3.65
Bollé Snap-shut Spectacle Case
• Clic-clac black polyester pouch
Code: 292994Each £1.75
Bollé Microfibre Bag For Spectacles
• Black mircofibre bag for all type of spectacles
Code: 292993Each £1.35
Bollé Mirco Fibre Bag
For Goggles
• Black mircofibre bag for all types
of goggles
Code: 292889 Each £2.20
Bollé Spectacle Case
with Belt Clip And Loop
• Black polyester case with belt
clip and loop
Code: 292998 Each £3.20
Bollé Semi-rigid Fit
Spectacle Case
with Belt Loop
• Large black semi-rigid polyester
fit case with belt loop
Code: 292996 Each £4.00
Bollé B200
Lens Cleaning Kit
• Anti-mist, anti-static lens cleaning
• Microfibre cloth
• For all types of lenses
• Single application lasts at least
48 hours
• Packed in cartons of 10
Code: 292815 Each £7.83
153

Head Protection
Buying Guide
European Standards
EN 397 specifies physical and performance requirements of industrial safety
helmets. Certain tests are mandatory if the product is to receive EN 397
approval.
These cover:
• Shock absorption
• Chinstrap anchorage
• Resistance to penetration
• Flame resistance
A manufacturer can choose to submit his products to additional optional
tests. Such tests could lead to one or more of these markings appearing on a
helmet.
-20°/-30°C The helmet will provide some protection when worn in an
environment at or above this temperature. -40°C ultra low temperature
(outside of EN 397)
440V a.c. The helmet will protect against short-term, accidental contact with
live electrical conductors up to this voltage
LD The helmet will provide some resistance to lateral compressive (nonimpact)
loads
MM Molten Metal splash test
EN 14052 Builds on EN 397 to include more onerous tests and requirements,
but also to include requirements for additional impact protection to the front,
rear and sides of the head. It also includes performance tests for the retention
system (typically headband and chin strap), not typically included in EN 397.
EN 50365 Electrically insulating helmets for use on low voltage installations
EN 812 Is the standard for Industrial Bump Caps, which are intended
to provide protection against bumps caused by walking into hazardous
projections. A Bump Cap does not provide protection against falling or thrown
objects and should not be used where a safety helmet is required
EN 12492 Helmet for Mountaineers
Centurion Embroidery Service
Subject to minimum quantities, logos can be embroidered onto the front of
the cap.
(1) Minimum area 4mm square, half tones may/may not work depending on
design. Some complex logo designs may not be suitable for embroidery
(2) Size of logo could be larger or smaller dependent on shape and style of
design
(3) This can be a mix of colours, providing each colour is ordered in box
quantities and is the same model and the logo style and colours are the same
(4) Embroidery – up to 5000 stitches. For over 5000 stitches, price on application
Health & Safety
Identifying Hazards
A safety helmet is required in almost every industry where there is a risk
of being injured by falling objects. In areas of restricted head space where
accidental bumping of the head could be involved (e.g. Overhead piping) a scalp
protector (bump cap) should be considered. Bump caps are not a substitute for
safety helmets and must not be used to protect the head from falling objects.
Identifying Materials
Shells are primarily made using UV stabilised high density polyethylene (HDPE)
or ABS (Acrylonitrile Butadiene Styrene). Harnesses are made using low density
polyethylene or textile webbing.
Care And Maintenance
A helmet may be cleaned with soap and water, drying with a soft cloth. A
helmet should not be cleaned with abrasive substances or solvents and must not
be stored in direct sunlight or in contact with chemicals.
The wearer should inspect their helmet regularly. Any helmet showing more
than superficial abrasions or scuffing to the shell should be replaced.
Shelf Life
To comply with European Standards, all helmets are marked with the quarter or
month and year of manufacture. If helmets are stored in boxes in which they
were supplied and do not experience environmental extremes, the shelf life of a
helmet is not limited. However, it is not recommended that a helmet should be
in use five years after date of manufacture.
So What Are The Differences?
A helmet is not just a helmet. They have many different features providing
specific user benefits, such as:
• Weight: Some helmets are lighter than others. A lightweight helmet may
provide more comfort during prolonged periods of use
• Cradle: A helmet can have either a basic polyethylene cradle or a more
comfortable textile webbing cradle
• Sweatband: A helmet can have either none, a standard or a high absorbent
sweatband for improved comfort during use
• Ventilation: Some helmets are ventilated, providing cooling airflow during use
• Badging: Some helmet designs allow for a larger front badging area, for
an enhanced corporate image
• Peaks: Peak lengths can vary – a reduced peak is available for improved
upward visibility
• Retro-Reflective Surfaces: Reflective surfaces that provide greater visibility of
the wearer in low light conditions
154
154

155125

Head Protection
Premium Safety Helmets
Centurion Concept Vented Reduced Peak Safety Helmet
Ref: S08
CONFORMS TO EN 397, LD, -40°C, EN 50365 1000v a.c.
• For improved upward vision.
• Size: 51-63cm
• Colour: White
Code: 271134 Each £11.99
Centurion Concept Vented Full Peak Safety Helmet
Ref: S09
CONFORMS TO EN 397, LD, -40°C, EN 50365 1000v a.c.
• Maximum impact and lateral deformation protection
• Maximum comfort and balance for prolonged use
• ABS lightweight shell
• Extra nape protection
• Comfortable cradle and high absorbent sweatband
• Size: 51-63cm
• Colour: White
Code: 271135Each £11.49
• Colour: Yellow
Code: 271189 Each £11.49
• Colour: Orange
Code: 271225 Each £11.49
• Colour: Blue
Code: 271236Each £11.49
Keep Safe MK7 Vented Full Peak Safety Helmet
CONFORMS TO EN 397, -40°C, MM, EN 50365, 1000v a.c.
• Extreme all day comfort with balance
• Fully absorbent leatherette comfort band
• International slots to attach Surefit accessories
• Extra large area for logo’s to be applied
• Durable shell which exceeds EN 397
• Size: 53-64cm
• Colour: White
Code: 272048Each £10.49
156
156
Keep Safe MK7 Vented Full Peak Safety Helmet with
Retractable Eyeshield
CONFORMS TO EN 397 -40°C, MM, 440v a.c.nv, EN 50365, 1000v a.c. AND EN 166 1.F.
• Sureslide retractable eyeshield
• EasyJust harness adjustment system
• Fully absorbent leatherette comfort band
• International slots to attach Surefit accessories
• Size: 53-64cm
• Colour: White
Code: 271145Each £15.99

Premium Safety Helmets
Centurion Spectrum Overspec Safety Helmet
Ref: S20WF
HELMET CONFORMS TO EN 397, -40°C, 1000V A.C, LD, MM & EN 50365 SPECTACLES CONFORM
TO EN 166 1 B T & EN 170 2C-1, 2
A revolution in the integration of spectacles within industrial safety helmets.
• Added side impact protection (lateral deformation within EN 397)
• Proven, unique Venturi system – optional ventilation
• Improved comfort, coolness during warmer conditions
• Anti-scratch and anti-mist coating
• Built in full adjustments
• Size: 51-63cm
• Colour: White
Code: 272446Each £24.49
Head Protection
Centurion Reflex Safety Helmet
Ref: S12PLUS WHVY
HELMET CONFORMS TO EN 397, -30°C, & EN 50365
Designed with safety in mind; supplied with a Silver rear flash as standard.
• Ventilation is provided
• Wide front corporate badging area
• Combi-slot enables it to be compatible with accessories
• Size: 51-63cm
• Colour: White with Hi-Vis Yellow Flash
Code: 271042Each £10.10
Centurion Vision Plus Safety Helmet
Ref: S10
HELMET CONFORMS TO EN 397, EN166 - 1 A T (EN170) 2C-1, 2, -30°C, & EN 50365
A revolution in the integration of spectacles within industrial safety helmets.
• Grade A high energy impact protection to EN 166; providing the highest impact
protection possible
• Anti-scratch and anti-mist coating
• Designed to allow you to wear prescription eyewear
• Moulded design provides improved lower cheek coverage
• Size: 51-63cm
• Colour: White, Yellow, Red, Blue, Green
Code: 431346Each £21.04
157

Head Protection
Scott Premium Safety Helmets
Head Protection Range
Scott Safety’s range of safety helmets combines high performance impact protection and dependable stability with exceptional comfort;
in modern stylish designs that workers appreciate. With extensive and easily integrated solutions for face, eye and hearing protection;
Scott Safety offers the complete head protection package.
Scott Safety HC300 Lightweight Safety Helmets
CONFORMS TO EN 397
• Stylish and comfortable safety helmet design
• Weighing 310g
• Manufactured from high-density polyethylene
• Durable, well balanced with an extensive range of accessories
• Rain gutter provided
• Suitable for exposed environments
• HC300EL
• Colour: Yellow
Code: 430391Each £6.95
• HC300SB
• Colour: Yellow
Code: 430382 Each £4.51
• HC300NSB
• Colour: Yellow
Code: 430376 Each £4.11
• HC300EL
• Colour: White
Code: 430387 Each £6.95
• HC300SB
• Colour: White
Code: 430381 Each £4.51
• HC300NSB
• Colour: White
Code: 430375 Each £4.11
• HC300EL
• Colour: Red
Code: 430390 Each £6.95
• HC300SB
• Colour: Red
Code: 430380 Each £4.51
• HC300NSB
• Colour: Red
Code: 430374 Each £4.11
• HC300EL
• Colour: Green
Code: 430388Each £6.95
• HC300SB
• Colour: Green
Code: 430384 Each £4.11
• HC300NSB
• Colour: Green
Code: 430378 Each £4.11
• HC300EL
• Colour: Blue
Code: 430386 Each £6.95
• HC300SB
• Colour: Blue
Code: 430379 Each £4.11
• HC300NSB
• Colour: Blue
Code: 430373 Each £4.11
• HC300EL
• Colour: Orange
Code: 430389 Each £6.95
• HC300SB
• Colour: Orange
Code: 430383 Each £4.51
• HC300NSB
• Colour: Orange
Code: 430377 Each £4.11
Scott Safety HC600 Reduced Peak Safety Helmets
CONFORMS TO EN 397
• Perfect blend of comfort, stability and balance to ensure a high degree of wear
• Multiple branding positions
• Premium quality ABS polymer for long lasting protection
• Rain gutter provided
• Can be connected to an extensive range of face and hearing protection
• Internal retractable eyeshield
• Colour: Red
Code: 431221Each £10.00
• Colour: White
Code: 430408 Each £10.00
• Colour: Blue
Code: 430405 Each £10.00
• Colour: Yellow
Code: 430407 Each £10.00
158
158
EL= Elite
SB= Sweatband
NSB=No Sweatband

Quality Safety Helmets
Centurion 1125 Full Peak Safety Helmet
CONFORMS TO EN 397, 440v a.c., MM, LD, -30°C
• Industry standard
• General purpose impact protection
• UV stabilised high density polyethylene
• Size: 51-63cm
• Colour: White, Yellow, Red, Orange, Green, Blue
Code: 431348Each £8.49
Head Protection
Centurion 1125 Reduced Peak Safety Helmet
Ref: S17A
CONFORMS TO EN 397, 440v a.c., MM, LD, -30°C
• Reduced peak for improved upward vision
• Size: 51-63cm
• Colour: White
Code: 272435Each £8.99
• Colour: Yellow
Code: 272436 Each £8.99
• Colour: Blue
Code: 272447 Each £8.99
Keep Safe Comfort Plus Full Peak Safety Helmet
CONFORMS TO EN 397, -30°C, MM, 440 VAC, EN 50365, 1000v a.c.
• Premier version of probably Europe’s most popular design
• Shell accommodates larger head sizes
• Slip adjustment to fit
• Designed for prolonged wearer comfort
• Size: 53-63cm
• Colour: White
Code: 271100Each £7.49
• Colour: Yellow
Code: 271102Each £7.49
• Colour: Red
Code: 271104Each £7.49
• Colour: Blue
Code: 271110Each £7.49
• Colour: Black
Code: 271163Each £7.49
159

Head Protection
Specialist Safety Helmet
Centurion Heightmaster Safety Helmet Ref: S08WFM
CONFORMS TO EN 397 Shock, penetration, LD and -40ºC. Approved to EN 12492
and EN 50365
• Added security and comfort when working at heights
• Reduced peak for improved upward visibility
• Robust suspension system and chinstrap reduces the risk of displacement in the
event of a fall
• Colour: White
Code: 272424Each £42.76
Forestry Protection
SNR
28
Centurion 1100 Classic Forestry Kit
CONFORMS TO EN 352-3, HELMET TO EN 397:2012+A1:2012, MESH EN1731:1997
Complete system – safety helmet, face shield, ear muffs rain shield
• Lightweight and comfortable HPDE helmet complete with mesh forestry visor
and hearing protection
• Colour: Orange
• Weight: 375g
Code: 272579Each £35.26
3M Peltor G500 Forestry Headgear
CONFORMS TO EN 352-3 AND VISOR CONFORMS TO EN 1731F H=33 M=25 L=15 SNR=27
• G500V5CH510 OR 5C visor and Optime 1 ear muffs
• Up/down in 3 positions
• Ergonomic, adjustable ratchet harness – eight positioning
• Can use in conjunction with 3M integrated eyewear and communication ear
muffs
• Colour: Orange
Code: 276713Each £39.99
SNR
27
160
160
SNR
27
3M Peltor G500 Industry Headgear
EAR MUFFS CONFORMS TO EN 352-3 H=32 M=25 L=15 SNR=27 VISOR CONFORMS TO EN 166
ABT
• G500V5FH510-EU–5F-1 visor and Optime I ear muffs
• Frontal lobe ventilation channels
• Up/down in 3 positions
• Ergonomic, adjustable ratchet harness – eight positioning
• Can use in conjunction with 3M integrated eyewear and communication ear
muffs
• Colour: Yellow
Code: 276712Each £39.99

First Base 3 Bump Protection
Patented flexible shell design, manufactured from durable ABS plastic. Breathable cap fabric with high levels of ventilation.
This reduces heat stress and improves wearer comfort. Contamination free cap design - no risk to process.
Suited to applications in precision engineering and the food industry.
Breathability
• High levels of ventilation
Comfort
• Compressed closed cell foam
• Wide and absorbent terry
towelling sweatband
Peak
• Low profile design
• Machine washable
Scott Safety First Base 3
HC24 Bump Cap
• Perfect blend of comfort, stability
and balance to ensure a high
degree of wear
• Highly breathable with a micro
perforated shell
• Ventilation systems and humidity
reducing
• Wicking fabric sweatband included
• Abs plastic shell, design to adapt
contour of the head
Head Protection
Unique Size Adjustments
• Improves security of the cap
• Colour: Hi-vis Orange
Code: 431228Each £13.50
• Colour: Hi-vis Yellow
Code: 430414 Each £13.50
• Colour: Grey
Code: 431225 Each £11.75
• Colour: Navy
Code: 279057Each £11.75
• Colour: Royal Blue
Code: 431226 Each £11.75
• Colour: Red
Code: 430415 Each £11.75
• Colour: Black
Code: 431224 Each £11.75
• Colour: Green
Code: 430413 Each £11.75
Centurion Standard Peak Airpro
Baseball Bump Cap Ref: S38
• Peak length 5cm
• Lightweight head protection
• Size: 54-62cm
• Other colours are available
• Colour: Navy Blue
Code: 279080Each £11.99
• Colour: Black
Code: 279801Each £11.99
Centurion Standard Peak High
Visibility Airpro Baseball
Bump Cap Ref: S38
• Reduced peak 3cm
• Lightweight head protection
• Size: 54-62cm
• Colour: High Visibility Orange
Code: 279805Each £13.99
• Colour: Saturn Yellow
Code: 279806 Each £13.99
Scott Safety First Base 3 HC23
Beanie Bump Cap
CONFORMS TO EN812:A1
• Stylish element to protective headwear, whilst
retaining the practicality of an approved bump cap
• Designed to provide protection against effects of
striking the head against hard, stationary objects
• Colour: Black
Code: 431229 Each £19.95
• Colour: Grey
Code: 431230 Each £19.95
• Colour: Navy Blue
Code: 431231 Each £19.95
161

Head Protection
Helmet Accessories
Combine and interchange head,
face and hearing accessories quickly
and simply, fully compatible with
all Centurion helmets.
S41C Connect ® Baltic Ear
Muffs
CONFORMS TO EN 352 PART 3 H=29 M=22
L=15 SNR=25
• General purpose helmet mounted
earmuff
• Lock-out facility for parking when
not in use
• Colour: Metallic Grey
• Weight: 170g
Code: 254255Each £19.49
S42C Connect ® Aegean Ear Muffs
CONFORMS TO EN 352 PART 3 H=34 M=27 L=20 SNR=30
• Lightweight, high quality earmuff
• Excellent protection throughout the frequency range
• Colour: Metallic Grey
• Weight: 250g
Code: 254412Each £21.99
S54 Connect ® Face Screen Carrier
CONFORMS TO EN 166
• Flip-up facility
• Accepts all Connect face screens
• Can be used with Connect earmuffs
Code: 272469Each £11.99
S590 Connect ® Polycarbonate
Face Screen
CONFORMS TO EN 166 1.B.9.3
• Size: 225mm (9”)
Code: 272460Each £10.99
162
162
S30E Centurion ® Connect Chinstrap
• Elasticated chinstrap with chin cup for extra security
Code: 272432Each £2.89
S31N Connect ® Nylon Sweatband
• Brushed nylon sweatband for improved comfort
Code: 272409Each £1.09

Cold Weather Hood Systems
Scott Cold Weather Helmet Liners
• Zero Hood Range
• Thinsulate Lined
• Waterproof and windproof
• Colour: HXZH/S Black
Code: 430412 Each £10.95
• Colour: HXZH/HY Yellow
Code: 430420 Each £13.75
Head Protection
S50FL Centurion ® Universal Fleece
Liner
• Keeps head, ears, neck warm
• Fits between cradle and helmet shell
• Full integration, plus helmet security
• CE approved to fit all listed Centurion ® helmets
• Colour: Black
Code: 271211Each £8.49
S50HVYFC Centurion ® Helmet Frost
Cape
• Reflective strip, high visibility colour
• Attaches to fleece liner
• Material meets EN 471 specification
• Colour: High Visibility Yellow
Code: 271432Each £13.99
S50HVOFC Centurion ® Helmet Frost
Cape
• Ideal for Rail Industry
• Integrated liner
• Compatible with helmet mounted ear muffs
• Material meets requirements of GO/RT 3279
• Colour: High Visibility Orange
Code: 271430Each £13.99
Helmet Accessories
SNR
27
SNR
29
SNR
32
Helmet Mounted Ear Defenders
To suit “Style” range and “Tuffmaster”
• EN352-3
• Low-to-medium noise level
• SNR 27
• Zone 1: Yellow
Code: 254317Pair £13.05
Helmet Mounted Ear Defenders
To suit “Style” range and “Tuffmaster”
• EN352-3
• Low-to-medium noise level
• SNR 29
• Zone 2: Orange
Code: 254321Pair £16.10
Helmet Mounted Ear Defenders
To suit “Style” range and “Tuffmaster”
• EN352-3
• Low-to-medium noise level
• SNR 32
• Zone 3: Red
Code: 254318Pair £17.86
163

Hearing Protection
Buying Guide
HSE Control of Noise at Work Regulations
The Control of Noise at Work Regulations 2005 came into force for all
industry sectors in Great Britain on 6th April 2006 (except for the music
and entertainment sectors where they came into force on 6th April 2008).
The aim of the Noise Regulations is to ensure that employees hearing is
protected from excessive noise at their place of work, which could cause
them to lose their hearing and/or to suffer from tinnitus (permanent
ringing in the ears).
The level at which employers must provide hearing protection is now
85 decibels (daily or weekly average exposure) and the level at which
employers must assess the risk to workers’ health and provide them
information and training is now 80 decibels. There is also an exposure
limited value of 87 decibels, taking account of any reductions in exposures
provided by hearing protection, above which workers must not be
exposed.
HML
Health & Safety
Sound Levels/ Noise Meters
Part of your risk assessment should involve understanding the level of
noise within your work environment. Sound measuring systems can be
used to help employers/employees select the appropriate type of hearing
protective equipment for use in areas of the workplace. The fitting of
hearing protection products is just as important as establishing the total
noise level.
Dispensers
An ideal solution for where hearing protection is required all the time at a fixed
location within the workplace.
Foam Ear Plugs
Made from expandable slow recovery foam that helps provide the best
combination of comfort and protection for most users. Typically foam plugs are
rolled down prior to insertion where the foam plug expands to provide a snug and
secure comfortable fit. Generally seen as a disposable product.
164
164
HML is High, Medium and Low and is literally how the protector performs
at high medium and low frequencies. The values (attenuation level) of
each will be found on the packaging of the hearing product you purchase.
A SNR (Single Number Rating) of 30 will not necessarily give a 30 decibel
attenuation at all frequencies.
Rule of Thumb
When it is necessary to shout in order to be heard three feet away, the
noise levels may be 85 decibels or more. Hearing protection must be made
available to employees where sound levels are at or above 80 decibels
and strictly enforced where the sounds levels reach or exceed 85 decibels.
Foam Ear Plugs
Made from expandable slow recovery foam that helps provide the best
combination of comfort and protection for most users. Typically foam plugs
are rolled down prior to insertion where the foam plug expands to provide
a snug and secure comfortable fit.
The fitting of hearing protection
products is just as important as
establishing the total noise level.
To insert a foam ear plug, slowly roll
and compress the plug into a very
thin cylinder. While compressed,
insert the plug well into the ear
canal. This will be made easier if
you reach around the head to pull
the ear outward and upward during
insertion.
SNR (Single Number Rating)
SNR is the number of potential decibels the hearing
OPTIME
protection will
ALERT
reduce
SYSTEM
the noise level by, if fitted correctly. The aim is to find a suitable product
that brings noise level down to between 70 and 80 decibels. Over protection
should also be avoided, as people may not be able to hear important every
day sounds. SNR is only a general means of comparing different sound
protection levels for different hearing protection.
Target noise in the ear = 75dB to 80dB. Noise level = 100dB.
SNR value of product = 25dB. In the ear noise = 75dB. Target met = 4
Moulded Ear Plugs
Made from flexible materials that are preformed to fit the ear canal. These
reusable ear plugs are comfortable, hygienic and economical. Hygienic carrying
case made available with some products.
Detectable Ear Plugs
Available to buy in either a foam or a moulded finish. The ear plug is fitted with
a choice of detectable components (steel ball bearing or a nonferrous filter)
finished with a visible non-food blue detectable cord. Hygienic carrying case made
available with some products.
Banded Semi-Aural Ear Plugs
Can be finished in either a foam or moulded tip. Ideal for intermittent use as they
are quick to put on and take off as well as being easy to store around the neck.
They provide less protection than either plugs or ear muffs and are not usually
recommended for continuous long-term wearing.
Ear Defenders
Ear Defenders have rigid cups with soft plastic
cushions that seal around the ears to block out
noise. The cushions are foam filled which
are seen to be lightweight and durable.
SNR (Single Number Rating)
OPTIME ALERT SYSTEM
RNR* < 85dB(A)
You do not have to wear hearing protection,
but make it available to your workers.
Noise Thermometer
Sound Energy Doubles Every 3dB
RNR* 130dB94dB Immediate - 105dB(A) pain threshold
You are above the permitted exposure level,
hearing protection is compulsory. Oxygen Ideal Torch for
high and medium frequency noise. 121dB
Short exposures at this level
RNR* 83dB - 93dB(A)
RNR* 95dB - 110dB(A)
120dB may cause hearing damage
You are above the permitted exposure level,
You are above the permitted exposure level,
hearing protection is compulsory.
hearing protection is compulsory. Ideal for
all frequencies. Impact Wrench
102dB
RNR* 87dB - 98dB(A)
PLEASE NOTE: At levels above 95dB you will need to get
You are above the permitted exposure level, an accurate noise assessment to correctly select the
hearing protection is compulsory. Ideal for product. Green and 100dB Yellow marked products Extremely are loud not
high frequency noise.
suitable for use in low frequency noise.
OPTIME ALERT SYSTEM
Forklift
RNR = Recommended Noise Rating
87dB
RNR* < 85dB(A) RNR* < 85dB(A)
RNR* 94dB - 105dB(A) RNR* 94dB - 105dB(A)
You are above the permitted exposure You are above level, the permitted exposure level,
Protection
You do not have to wear hearing You protection, do not have to wear hearing protection,
hearing protection is compulsory. hearing Ideal protection for is compulsory. Ideal for
MUST BE PROVIDED
but make it available to your workers. but make it available to your workers.
high and medium frequency noise. high and medium frequency noise. 85dB
above this level
Hand Saw
RNR* 83dB - 93dB(A) RNR* 83dB - 93dB(A) RNR* 95dB - 110dB(A) RNR* 95dB - 110dB(A)
85dB
You are above the permitted exposure You are above level, the permitted exposure You are level, above the permitted exposure You are above level, the permitted exposure level, Protection recommended
hearing protection is compulsory. hearing protection is compulsory. hearing protection is compulsory. hearing Ideal protection for is compulsory. Ideal for
for 8-Hour exposures
all frequencies.
all frequencies.
80dB
above this level
RNR* 87dB - 98dB(A) RNR* 87dB PLEASE - 98dB(A) NOTE: At levels above PLEASE 95dB you NOTE: will At need levels to above get 95dB you will need to get Vacuum Cleaner 74dB
You are above the permitted exposure You are above level, the an permitted accurate exposure noise assessment level, an accurate to correctly noise select assessment the to correctly select the
hearing protection is compulsory. hearing Ideal protection for product. is compulsory. Green Ideal and for Yellow product. marked Green products and are Yellow not marked products are not
high frequency noise. high frequency noise. suitable for use in low frequency suitable noise. for use in low frequency noise.
75dB
Non-Hazardous
RNR = Recommended Noise RNR Rating = Recommended Noise Rating
160dB
140dB
Apollo Lift-off
188dB
Immediate physical damage
Jet Engine Take-off
150dB
Maximum allowable exposure
Impact Drill
130dB

165

Hearing Protection
Foam Ear Plugs
SNR
39
SNR
37
3M E-a-rsoft Fx Foam Ear Plugs
CONFORMS TO EN 352-2 H=39 M=36 L=34 SNR=39
• Flanged shape – assists ease of insertion
• Smooth tapered finish – enhances comfort
• Extremely high attenuation at 39dB
• Colour: Yellow
• Un-corded
Code: 254440 Box of 200 pairs £52.49
• Corded
Code: 254442 Box of 200 pairs £82.49
Howard Leight Foam Ear Plugs
CONFORMS TO EN 352-2 H=36 M=35 L=34 SNR=37
• Designed for improved fit and attenuation
• Colour: Orange
• Un-corded, Max-1 REF: 3301161
Code: 254071 Box of 200 pairs £42.99
• Corded, Max-30 REF: 3301130
Code: 254072 Box of 100 pairs £39.99
SNR
38
SNR
37
166
166
3M E-A-R Push-Ins Foam Ear Plugs
CONFORMS TO EN 352-2 H=37 M=36 L=34 SNR=38
• Insertion stem ensures quick, easy fitting (no roll down)
• Optimal protection at 38dB
• Soft, pliable foam body – maximum comfort, seal
• Colour: Blue stem, Yellow plug
• Un-corded
Code: 254443 Box of 100 Pairs £32.95
• Corded
Code: 254444 Box of 100 Pairs £61.27
3M 1100 Foam Ear Plugs
CONFORMS TO EN 352-2 H=37 M=34 L=31 SNR=37
• Soft, hypo-allergenic polyurethane foam
• Smooth, dirt resistant surface
• Tapered design fits most ear canals
• Maximum comfort
• Colour: Orange
• Un-corded
Code: 254291 Box of 200 Pairs £29.34
• Corded
Code: 254290 Box of 100 Pairs £27.80

Foam Ear Plugs
SNR
28
3M E-A-R Classic Foam Ear Plugs
CONFORMS TO EN 352-2 H=30 M=24 L=22 SNR=28
• Soft, energy absorbing polymer foam
• Excellent hearing protection
• All-day comfort
• Colour: Yellow
Code: 254248 Box of 250 pairs £67.97
Hearing Protection
SNR
36
Moldex Pura-Fit Corded Ear Plugs 6900
Conforms to EN 352 h=34 m= 32 l=36 snr= 36
• Comfortable PU earplugs suited to protect against long-term exposure
• For protection against higher noise levels
• Comfortable and soft material
• Easy to insert
Code: 431340 Box of 200 pairs £57.83
SNR
37
Keep Safe Foam Ear Plugs
CONFORM TO EN 352-2 H=36 M=34 L=33 SNR=37
• Soft PU foam
• Easy roll down
• High level of attenuation
• Colour: Orange
Code: 254160 Box of 200 pairs £18.99
SNR
35
SNR
22
Moldex Spark Plug Ear Plugs 7800
Conforms to EN 352 H= 34 M=32 L=31 SNR=35
• Comfortable PU earplugs suited to protect against long-term exposure
• Contoured shape
• Colourful & appealing
• Comfortable and soft material
• Easy to insert
Code: 254249 Box of 200 Pairs Each £24.84
Moldex Mellows Ear Plugs 7600
Conforms to EN 352 H=26 M=18 L=12 SNR=22
• Comfortable PU earplugs suited to protect against long-term exposure
• For protection against lower noise levels
• Designed to keep you in touch with your environment
• Comfortable and soft material
• Easy to insert
Code: 431341 Box of 200 pairs £24.84
167

Hearing Protection
Foam Ear Plugs
SNR
26
SNR
26
uvex xact-fit
• SNR 26 dB
• The easiest plug to fit giving accurate fitting every time
• Tapered plug shape fits natural shape of the ear canal for easy, comfortable
secure fitting
• Ergonomic stem marked left and right with thumb indentations for easy fitting.
Left and right fitting ensures consistently accurate insertion and optimum
protection
• Adjustable neck cord
• Low pressure, sealed PU foam reduces the potential for contamination
• Replacement pods help prolong the life of the product
• Colour: Lime
• Corded
Code: 431430 Box 50 pairs, paired in minibox £50.50
uvex xact-fit replacement earplugs
Code: 431431 Box 250 pairs, 5 pairs per mini box £53.00
SNR
37
168
168
uvex x-fit
• SNR 37 dB
• Disposable foam ear plug
• Tapered shape that fits the natural shape of the ear canal
• X emboss helps reduce pressure on the ear canal due to there being less
material. Also aids easy and hygienic removal after use
• Low pressure sealed PU foam, reduces the potential for contamination and
gently expands to fit the size and shape of the ear canal
• Compatible with other items of PPE
• Colour: Lime
• Uncorded
Code: 431432 200 pairs, bagged in pairs £38.75
Corded
Code: 431433 Box 100 £37.25

Foam Ear Plugs
SNR
36
SNR
29
Hearing Protection
3M E-A-R E·A·Rsoft Yellow Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=34 L=31 SNR=36
• PU polyurethane foam
• Ultimate in comfort and protection
• Colour: Yellow
• Un-corded
Code: 254187 Box of 250 pairs £62.30
• Corded
Code: 254185 Box of 200 pairs £72.09
3M E-A-R Classic Corded Foam Ear Plugs
CONFORMS TO EN 352-2 H=30 M=26 L=23 SNR=29
• Classic ear plugs with easy-to-see blue vinyl cord
• Particularly suitable for use in manufacturing and process industries
• Colour: Yellow
Code: 254239 Box of 200 pairs £91.14
SNR
36
SNR
35
Moldex Pura-Fit To Go 7705
Conforms to EN352 h=35 m=33 l=31 snr=36
• Comfortable PU ear plugs suited to protect against long-term exposure
• Contains 50 pairs of Pura-Fit earplugs
• Keeps plugs hygienic between use
• For protection against higher noise levels
• Ear plugs are made from soft material that is easy to insert
Code: 431407 Box of 50 pairs £9.25
Howard Leight LL1 Laser Lite ® Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
• Self adjusting foam – expands to fit virtually every wearer
• Contoured T-shape – easy insertion and wear
• Vibrant colours – visible protection
• Colour: Pink/Yellow
• Un-corded
Code: 293510 Box of 200 pairs £40.49
• Corded
Code: 293411 Box of 100 pairs £36.99
169

Hearing Protection
Moulded Ear Plugs
SNR
30
SNR
32
SNR
27
Howard Leight Smart Fit Moulded
Re-usable Corded Ear Plugs
CONFORMS TO EN 352-2 H=32 M=27 L=23 SNR=30
• Revolution in comfort and individual fit
• Advanced material – uses body heat to adapt to
ear canal
• Unique detachable cord, smart HearPak pocket case
• Colour: Orange
Code: 254094 Box of 50 Pairs £46.99
3M E-A-R Ultrafit Moulded
Reusable Corded Ear Plugs
CONFORMS TO EN 352-2 H=33 M=28 L=25 SNR=32
• Unique one-size, fits most ear canals comfortably
• High attenuation
• Colour: Yellow
Code: 254090 Box of 50 Pairs £76.72
uvex whisper +
• SNR 27 dB
• Reusable, pre-shaped plug, no need to touch the
part that goes into the ear for reduced risk of
contamination and increased hygiene
• Tapered smooth fins which fit the natural shape
of the ear canal. Comfortable skin contact.
Reduced pressure for long term wear
• Comes with hygiene box for storage when not in
use. Can be washed and stored for repeated use
• Colour: Lime
• Corded
Code: 431434 Box of 50 pairs £61.25
SNR
30
SNR
20
170
170
Moldex Rocket Reuseable Corded Ear Plugs 6401
CONFORMS TO EN 352-2 H=26 M=26 L=24 SNR=30
• Suitable to protect against long term exposure
• Reuseable and washable
• Solid handle for easy insertion
• Colour: Purple/Lime
Code: 430290 Box of 50 Pairs £84.50
(per pair £1.69)
3M E-A-R Ultrafit 20 Moulded Re-usable Corded Ear
Plugs
CONFORMS TO EN 352-2 H=25 M=17 L=10 SNR=20
• Extra attenuation
• Correctly matched to noise level, allows conversation to be heard
• Washable up to 50 times
• Colour: Yellow
Code: 254091 Box of 50 Pairs £105.05

Detectable Ear Plugs
Available in either foam or moulded finish and fitted using detectable components – either a steel ball bearing or
non-ferrous filter, with non-food blue cord - making them ideal for use in food industries. Foam ear plugs are usually
disposable, while moulded ones are reusable.
SNR
37
SNR
37
SNR
36
Hearing Protection
Keep Safe Detectable PU Foam Ear
Plugs
CONFORMS TO EN 352-2 H=36 M=35 L=34 SNR=37
• Metal detectable
• Soft PU foam, disposable
• High attenuation
• Colour: Blue
Code: 254163 Box of 200 pair £65.99
uvex x-fit detec
• SNR 37 dB
• Disposable detectable corded ear plugs
• Tapered shape that fits the natural shape of the
ear canal
• X emboss helps reduce pressure on the ear canal
due to there being less material. Also aids easy
and hygienic removal after use
• Low pressure sealed PU foam, reduces the
potential for contamination and gently expands to
fit the size and shape of the ear canal
• Integration of metal and blue colour enables easy
recognition in production areas
• Colour: Blue
• Corded
Code: 430657 Box of 100 pairs £51.66
3M E-A-R Soft Detectable Foam
Ear Plugs
CONFORMS TO EN 352-2 H=34 M=34 L=31 SNR=36
• Smooth shape - comfortable insertion
• High attenuation
• Fully detectable cord, integral stainless steel ball
• Colour: Blue
Code: 254207 Box of 200 pairs £101.96
SNR
35
SNR
32
SNR
30
Howard Leight Laser Trak Detectable
Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
• Ideal for hygiene sensitive environments
• Non-ferrous metal safety component
• Traced visually or by metal detection
• Colour: Orange/Blue
Code: 254348 Pack of 100 pairs £53.99
3M E-A-R Tracer Detectable
Moulded Ear Plugs
CONFORMS TO EN 352-2 H=33 M=28 L=25 SNR=32
• Unique one-size comfortably fits most ear canals
• High attenuation
• Colour: Blue
Code: 254092 Box of 50 pairs £81.49
Howard Leight Smart Fit Detectable
Moulded Ear Plugs
CONFORMS TO EN 352-2 H=32 M=27 L=23 SNR= 30
• Advanced material - uses body heat to adapt to
ear canal
• Shapes to the users ear canal
• Increases user acceptance and compliance
• Colour: Blue
Code: 254095 Box of 50 pairs £74.49
171

Hearing Protection
Foam Ear Plug Dispensing Systems
An ideal solution for where the noise level is greater than 85 decibels and hearing protection is required all the time, these can be
positioned at the point of entry, helping to enforce employee usage of hearing protection.
SNR
36
3M E-A-R One Touch
Industrial Dispenser
• Accurately dispenses one earplug at a
time
• Specifically designes for tough environments and repeated use
• Flexibility to be used free-standing or secured easily to a wall
• Stock level visible through clear refill bottle
• 500 pairs per recyclable refill bottle (sold separately)
Code: 254301Each £36.83
3M E-A-R E·A·Rsoft Yellow Neons Foam
Ear Plugs Refill Bottle
CONFORMS TO EN 352-2 H=34 M=34 L=31 SNR=36
• Colour: Yellow
Code: 254277 Refill of 500 pairs £99.90
SNR
28
3M E-A-R Classic Foam Ear Plugs Refill Bottle
CONFORMS TO EN 352-2 H=30 M=24 L=22 SNR=28
• Colour: Yellow
Code: 254276 Refill of 500 pairs £116.49
SNR
37
SNR
37
SNR
35
SNR
35
172
172
Howard Leight LS400 Ear Plug
Dispenser
• Fully transparent
• Eye catching design encourages use
• Either wall mounted or free standing
• Dispenses MAX and LASER LITE refill packs (see below)
Code: 254077 Each £18.49
MAX-ID Foam Ear Plug Refill Pack For LS400 Dispenser
CONFORMS TO EN 352-2 H=38 M=35 L=34 SNR=37
Code: 254078 Pack of 200 pairs £32.99
LL-ID Laser Lite Foam Ear Plug Refill Pack for LS400
Dispenser
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
Code: 254079 Pack of 200 pairs £29.99
Howard Leight LS500 Leight Source
Dispenser
• Highly visible
• Easy to use
• Bulk fill facility – saves time, packaging waste
• Dispenses MAX and LASER LITE refill packs - (see
below)
Code: 254361 Each £133.49
MAX-ID Foam Ear Plug Refill Pack for LS500 Dispenser
CONFORMS TO EN 352-2 H=36 M=35 L=34 SNR=37
Code: 254080 Pack of 500 pairs £82.49
LL-ID Laser Lite Foam Ear Plug Refill Pack for LS500
Dispenser
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
Code: 254342 Pack of 500 pairs £73.99

Foam Ear Plug Dispensing Systems
SNR
35
SNR
35
Hearing Protection
Moldex Large Spark Plug Station 7850
Conforms to EN 352 h=34 m=32 l=31 snr=35
• Ear plug dispensing system - available in two sizes
• Plugs remain hygienic
• Dispenser mechanism is replaced automatically
• Mounting bracket available separately
• Ear plugs are made from soft material that is easy to insert
Code: 254297 Contains 500 pairs £62.11
Moldex Small Spark Plug Station 7825
Conforms to EN 352 h=34 m=32 l=31 snr=35
• Ear plug dispensing system - available in two sizes
• Plugs remain hygienic
• Dispenser mechanism is replaced automatically
• Mounting bracket available separately
• Ear plugs are made from soft material that is easy to insert
Code: 014135 Contains 250 pairs £38.10
Moldex Mounting Bracket For All Moldex Stations 7060
• Wall mount for all Moldex Stations
Code: 014122Each £5.99
SNR
22
SNR
22
Moldex Large Melows Station 7650
Conforms to EN 352 h=26 m=18 l=12 snr=22
• Ear plug dispensing system - available in two sizes
• Plugs remain hygienic
• Dispenser mechanism is replaced automatically
• Mounting bracket available separately
• Ear plugs are made from soft material that is easy to insert
Code: 430304 Contains 500 pairs £72.82
Moldex Small Melows Station 7625
Conforms to EN 352 h=26 m=18 l=12 snr=22
• Ear plug dispensing system - available in two sizes
• Plugs remain hygienic
• Dispenser mechanism is replaced automatically
• Mounting bracket available separately
• Ear plugs are made from soft material that is easy to insert
Code: 431344 Contains 250 pairs £34.50
173

Hearing Protection
Banded Semi-Aural Ear Plugs
Finished in either a foam or moulded tip, these are ideal for intermittent use, being easy to
put on or take off or simply store around the neck. Providing less protection than plugs or ear
muffs, they are not usually recommended for continuous long-term wearing.
To insert, reach around the back of your head and pull outward and upward on the ear. Using
the large ends of the pods, swivel them to direct the tips into the ear canal opening. Firmly
push and wiggle the pods into the canals until a snug seal is obtained. .
SNR
26
SNR
23
SNR
23
3M 1310 Banded Semi-Aural Ear
Plugs
CONFORMS TO EN 352-2 H=30 M=22 L=19 SNR=26
• Innovative flexible band
• Soft round foam plugs
• Optimum fit, superior comfort
• Colour: Orange
• Packed in cartons of 50
Code: 254279Pair £3.99
Howard Leight QB3/Hyg Quiet
Banded Semi-Aural Ear Plugs
CONFORMS TO EN 352-2 H=25 M=19 L=17 SNR=23
• Supersoft pads rest outside the ear
• Outstanding comfort
• Patented band design - prevents ear pads touching
contaminated surfaces
• Colour: Orange
Code: 254349 Box of 10 Pairs £36.49
Moldex Jazz-Band Banded Ear Plugs
6700
Conforms to EN 352 H=26 M=19 L=17 SNR=23
• Cost effective convenient option against
intermittent noise
• Very low band pressure for extra comfort
• Neck cord with safety release mechanism
• Comes with a spare pair of replacement pods
• Replacement pods available separately
Code: 430295 Box of 8 Pairs £50.80
(per pair £6.35)
SNR
27
SNR
23
SNR
21
174
174
Moldex WaveBand 1K Banded Ear
Plugs 6810
Conforms to EN 352 h=30 m=23 l=22 snr=27
• Cost effective convenient option against intermittent
noise
• Very low band pressure for extra comfort
• Worn under the chin, keeping it away from the
wearers body and clothing
• Replacement pods available separately
Code: 431343 Box of 8 Pairs £26.24
(per pair £3.28)
3M E-A-R Caps Banded Semi-
Aural Ear Plugs
CONFORMS TO EN 352-2 H=27 M=19 L=17 SNR=23
• One of the lightest semi-aural hearing devices
• Day-long protection
• Ideal disposable protectors for visitors
• Colour: Yellow
• Packed in cartons of 40
Code: 254221Pair £3.59
• Spare caps
Code: 254992 Pack of 50 Pairs £39.61
Keep Safe Banded Semi-Aural
Ear Plugs
• Banded ear plug with soft PU foam tips. SNR 21
Code: 254166 Each £1.65
Code: 254165 Box of 40 £66.00

Communication Headsets
Electronic Level Dependent Ear Muffs
SNR
32
SNR
31
Hearing Protection
3M Peltor ProTac II Ear Muffs
Conforms to EN352-2 H=31 M=29 L=24 SNR=32
A sophisticated communication solution that enhances attenuation and comfort.
Ideal for people subjected to impulse noise.
• Protects against harmful noise while letting in and amplifying ambient sounds.
Improves communication and safety
• Level dependent function lets you hear ambient sound: conversation, machine
sounds and warning signals at a safe level
• Shuts off after two hours if no function is used
• Reduces loud noise and amplifies quiet noise
·• Typical Applications: Intermittent and sudden noise that can’t be predicted
e.g. Machinery on construction sites or a press in a factory
• Compatible with radios for listening only
Code: 254355 Pair £141.99
Bluetooth Version
Code: 254369Pair £378.99
3M Peltor Optime Push-To-Listen Ear Muffs
CONFORMS TO EN 352-1 & EN 352-3 H=32 M=29 L=21 SNR=31
• On push of a button, muff opens up - so speech, warning signals can be heard
• Can be closed, or automatically shuts off after 30 seconds
• Colour: Black
• Weight: 490g
Code: 254143 Pair £29.99
3M PELTOR Optime III Premium Ear Muffs
For use in extremely noisy environments. Minimises resonance in the holder casings. Maximum high-frequency attenuation
SNR
35
SNR
35
3M PELTOR Optime III H540A Headband Ear Muffs
CONFORMS TO EN 352-1 H=40 M=32 L=23 SNR=35
• Colour: Black/Red
• Weight: 285g
Code: 254335Pair £17.99
3M PELTOR Optime III H540B Neckband Ear Muffs
CONFORMS TO EN 352-1 H=40 M=32 L=23 SNR=35
• Colour: Black/Red
• Weight: 270g
Code: 254330Pair £19.99
175

Hearing Protection
Ear Muffs
3M PELTOR Optime II Premium Ear Muffs
For demanding noise-hazard environments. Sealing rings filled with unique combination of liquid and foam. Optimum seal, with
comfortable, low contact pressure.
SNR
31
SNR
31
SNR
30
3M PELTOR Optime II H520A
Headband Ear Muffs
CONFORMS TO EN 352-1 H =34 M=29 L=20 SNR=31
• Colour: Black/Green
• Weight: 210g
Code: 254133Pair £14.99
3M PELTOR Optime II H520B
Neckband Ear Muffs
CONFORMS TO EN 352-1 H=34 M=29 L=20 SNR=31
• Colour: Black/Green
• Weight: 195g
Code: 254137 Pair £15.99
3M PELTOR Optime II H520
Safety Helmet Attachment Ear
Muffs
CONFORMS TO EN 352-3 H=34 M=28 L=19 SNR=30
• Colour: Black/Green
• Ref H52OP3H Weight: 240g
Code: 254202 Pair £16.99
• Ref H52OP3E Weight: 235g
Code: 254350Pair £16.99
3M PELTOR Optime I Premium Ear Muffs
Versatile, lightweight protection. Low profile, generous inside depth – comfortable to
wear. Easy teaming with other equipment.
SNR
30
SNR
27
SNR
26
176
176
3M PELTOR Optime II Food
Industry Ear Muffs
CONFORMS TO EN 352-1 H=34 M=28 L=19 SNR=30
• Easily cleanable with special headband ‘cushion’
• Special mould insert foam that does not absorb
moisture in humid environments or when moving
in and out of cold storage
• White colour for high visibility of contamination
Code: 254138 Pair £18.49
3M PELTOR Optime I H510A
Headband Ear Muffs
CONFORMS TO EN 352-1 H=32 M=25 L=15 SNR=27
• Colour: Yellow
• Weight: 180g
Code: 254136 Pair £11.99
3M PELTOR Optime I H510B
Neckband Ear Muffs
CONFORMS TO EN 352-1 H=30 M=24 L=15 SNR=26
• Colour: Yellow
• Weight: 165g
Code: 254135Pair £13.49

Moldex M Series
Modlex ear muffs are extremely comfortable and are made to resist even the most extreme conditions. A focus on design makes the
ear muffs easy to use and look great.
M-series: M4, M5 and M6
The M-series ear muffs are high quality material with a seamless workmanship to make these ear muffs robust and durable. Extremely
soft foam air cushions as well as low contact pressure ensure high wearer comfort.
SNR
30
Modlex M-Series 6110 M4 Ear Muffs
CONFORMS TO EN 352-1 H=34 M=27 L=20 SNR=30
• Robust headband retains shape
• Ribbed air cushions for cool comfort
• Flexible and lightweight
• Viscoelastic foam cushions - better pressure distribution for more comfort
• Extra wide ear space
Code: 431337 Pair £16.75
Hearing Protection
SNR
34
SNR
35
Modlex M-Series 6120 M5 Ear Muffs
CONFORMS TO EN 352-1 H=39 M=31 L=23 SNR=34
• Robust headband retains shape
• Ribbed air cushions for cool comfort
• Flexible and lightweight
• Viscoelastic foam cushions - better pressure distribution for more comfort
• Extra wide ear space
Code: 431338Pair £18.48
Modlex M-Series 6130 M6 Ear Muffs
CONFORMS TO EN 352-1 H=39 M=32 L=25 SNR=35
• Robust headband retains shape
• Ribbed air cushions for cool comfort
• Flexible and lightweight
• Viscoelastic foam cushions - better pressure distribution for more comfort
• Extra wide ear space
Code: 431339Pair £22.00
177

Hearing Protection
3M PELTOR X Series Ear Muffs
Protected wire head-band, building on the successful 3M Optime range.
• Lightweight dual moulded cups - maximum space inside helps minimise heat an moisture build-up
• Integrated design for increased robustness
• Colour-code easy recognition on site
• Electrically insulated headband
• Easy to clean
SNR
33
SNR
33
3M PELTOR X4A Ear Muffs
CONFORMS TO EN 352-1 H= 36, M = 30, L = 22 SNR= 33
• For high noise levels, ultra slim/lightweight design
• Colour: Bright Green
Code: 254153Pair £23.49
3M PELTOR X3A Ear Muffs
CONFORMS TO EN 352-1 H= 35, M = 30, L = 25 SNR= 33
• For high noise levels, E.g. Heavy engineering
• Colour: Red
Code: 254152Pair £20.49
SNR
31
SNR
27
178
178
3M PELTOR X2A Ear Muffs
CONFORMS TO EN 352-1 H= 34, M = 29, L = 20 SNR= 31
• For moderate to high noise levels, E.g. Construction
• Colour: Yellow
Code: 254151Pair £17.99
3M PELTOR X1A Ear Muffs
CONFORMS TO EN 352-1 H= 32, M = 24, L = 16 SNR= 27
• For light industry noise, E.g. Grounds maintenance
• Colour: Green
Code: 254150Pair £13.99

Standard Ear Muffs
SNR
27
SNR
26
SNR
24
Hearing Protection
Keep Safe Blue Cyclone Ear Muffs
CONFORMS TO EN 352-1 OVER THE HEAD H=33 M=25 L=17 SNR=27
BEHIND THE HEAD H=31 M=23 L=16 SNR=26
• Acoustic foam fill – good, effective protection across wide range of frequencies
• For manufacturing industries, agriculture, construction sites, food industry,
engineering
• Colour: Blue
• Weight: 300g
• Figures for behind-the-head wearing are available on request
Code: 254199Pair £8.99
Lightweight Target Earmuff
• Lightweight and comfortable
• Acoustic foam fill. Suitable for where noise is a problem or nuisance rather than
a hazard
• SNR 24
Code: 430201Pair £2.99
Helmet Mounted Ear Defenders (For Scott Safety Helmets – See page 158)
SNR
27
SNR
29
SNR
32
Helmet Mounted Ear Defenders
To suit “Style” range and “Tuffmaster”
• EN352-3
• Low-to-medium noise level
• SNR 27
• Zone 1: Yellow
Code: 254317Pair £13.05
Helmet Mounted Ear Defenders
To suit “Style” range and “Tuffmaster”
• EN352-3
• Low-to-medium noise level
• SNR 29
• Zone 2: Orange
Code: 254321Pair £16.10
Helmet Mounted Ear Defenders
To suit “Style” range and “Tuffmaster”
• EN352-3
• Low-to-medium noise level
• SNR 32
• Zone 3: Red
Code: 254318Pair £17.86
179

Harness & Safety Equipment
Buying Guide
Managing and Selecting Equipment
The work at height regulations 2005 requires employer’s to do all that is
reasonably practicable to prevent anyone falling.
Employer’s and those in control of any working at height activities, must
ensure work is properly planned and supervised. This includes using the
correct type of equipment for working at height.
Low risk tasks that are relatively straight forward will be less challenging,
when it comes to planning. Employer’s and those in control must assess
the risks first before carrying out any work.
Employer’s must:
• Take a sensible, practical approach when considering equipment for work at
height
• Factors to weigh up include; The height of the task, the duration and frequency,
and the condition of the surface being worked on
There will also be certain low-risk situations where common sense tells you no
particular precaution is necessary.
How Do You Select The Right Equipment?
When selecting equipment for work at height, employers must:
• Provide the most suitable equipment appropriate for the work
• Take account of factors such as the working conditions, the nature,
frequency and duration of the work
If you are unsure which type of equipment to use, once you have
considered the risks, please contact our sales team who will be happy to
help.
Health & Safety
Fall from height remains one of the
most common causes of serious
injury and death in the industry
today. This fact, coupled with
tightening regulations governing
working at height, results in a
greater need to consider how to
protect those exposed to potential
injury from a fall.
How To Make Sure The Equipment Is In Good
Condition?
Work equipment, for example scaffolding, needs to be assembled or
installed according to the manufacturer’s instructions and in keeping with
the industry guidelines.
Where the safety of the work equipment depends on how it has been
installed or assembled, an employer should ensure it is not used until it
has been inspected in that position by a competent person. A competent
person is someone who has the necessary skills, experience and
knowledge to manage health and safety.
Inspection should be carried out every time something happens that may
affect the safety and stability of the equipment, E.g adverse weather.
Training
Working at height is one of the most hazardous environments you can find yourself in. The Fall Protection and Rescue equipment needed to ensure safe
working can be confusing, leading to either mis-specification or misuse of product. Under the Work at Height Regulations 2005, anyone working at height
is required to be trained in the use and daily inspection of their fall protection equipment, as well as work at height safety procedures and rescue.
With the help of our preferred suppliers, we offer a full range of fall protection and rescue training and consulting. Training can be provided in either open
enrolment format or company-specific site courses, to suit your needs. Please contact us for more details and to discuss your specific requirements
180
180

181

Harness & Safety Equipment
Miller ® Fall Protection
Synonymous with quality and a focus on innovation, Miller Fall Arrest products provide
companies with an immediate selection of fall protection equipment suited to their
requirements. Conveniently packed in back packs or small carrying cases, all kits
conform to EN 361.
H-Design Duraflex Bodyfit
CONFORMS TO EN361/358
• 2-point harness with stretch shoulder webbing,
mating buckles on chest and leg straps, front and rear
D-ring anchorage points, and work positioning belt
with side D-rings
• Size: 1, 2, 3
Code: 431600Each £152.00
H-Design Duraflex
CONFORMS TO EN361
• 2-point harness with stretch shoulder webbing,
mating buckles on chest and legs straps, front and
rear D-ring anchorage points
• Size: 1, 2, 3
Code: 431601Each £97.85
H-Design Duraflex
CONFORMS TO EN361
• 1-point harness with stretch shoulder webbing,
mating buckles on chest and legs straps, front and
rear D-ring anchorage points
• Size: 1, 2, 3
Code: 431602Each £58.65
182
182
Titan Mobile Platform Kit
• 1-point harness
• 1m lanynard
Code: 431603Each £61.98
Backpack Kit
CONFORMS TO EN361 AND EN355
• H-Design Duraflex 1-point harness (1032856), 2m elasticated Manyard (1005325) and backpack (1007067)
Code: 431604Each £128.71

Fall Arrest Kits & Accessories
Fall Arrest Kit
CONFORMS TO EN361 AND EN355
• H-Design Duraflex 1-point harness (1032856),
lanyard c/w energy absorber and 50mm scaffold
hook (1013430/1015140) and backpack (1007067)
• Standard kit length - 2m
Code: 431606Each £122.03
Harness & Safety Equipment
Universal Kit
CONFORMS TO EN361 AND EN360
• H-Design Duraflex 1-point harness (1032860), Turbolite personal fall limiter (1018013) and backpack (1007067)
Code: 431605Each £224.97
Twin Manyard
CONFORMS TO EN355
• Twin Manyard with galvanised connector and 2
scaffold hooks (63mm)
• Length: 1.5m
Code: 431607Each £181.63
• Length: 2m
Code: 431608Each £191.90
ME86 Manyard
CONFORMS TO EN355
• ME86 Manyard with scaffold hook and galvanised
connector
• Length: 1.5m
Code: 431609Each £85.61
• Length: 2m
Code: 431610Each £89.39
Shock Absorbing Lanyard
CONFORMS TO EN355
• Shock Absorbing Lanyard, kemmantel rope,
2 x CS20 steel screwgate karabiners
• Length: 1m
Code: 431611Each £50.33
• Length: 1.5m
Code: 431612Each £52.01
• Length: 2m
Code: 431613Each £55.92
HandZup
CONFORMS TO EN358
• HandZup with twistlock karabiner, snaphook
and protective sleeve
• Length: 2m
Code: 431614Each £112.66
183

Washroom
184
184

Washroom
185

Washroom
STEP 1 – PROTECT
Stokoderm
Sun Protect 30 PURE
• Sunscreen with UVB 30, UVC35 and
UVA 5 star “ultra” rated protection
• A perfume-free, water resistant
5 Star rated SPF30 sunscreen for
professional use to protect the
skin against UV-A, UV-B and UV-C
exposure.
• SUN100ML - Size:100ml tube
• Packed in: Cartons of 12
Code: 431560Each £5.62
• SUN1L - Size: 1L Cartridge
• Packed in: Cartons of 6
Code: 548263Each £33.49
Stokoderm
Sun Protect 50+
• Sunscreen with UVB 50+ and UVA 5
star “ultra” rated protection
• A water resistant and easy to
apply sun protection spray that is
immediately absorbed by the skin
• With its sun protection factor greater
than 50 (SPF 50+) it offers maximum
protection against the whole
spectrum of terrestrial radiation
• SPF200ML - Size: 200ml bottle
• Packed in: Cartons of 6
Code: 431561Each £14.39
186
186
Deb Stoko
Sun Protect 1L Dispenser
• Unique range of 1 litre, 2 litre and
4 litre closed, sealed cartridge
dispensers that meet the distinct
needs of any workplace and public
facility environment
• or exclusive use with Deb skin
care products to create tailored
skin protection and hand hygiene
programmes
• SUN1LDSEN - Size: 1L Dispenser
• Packed in: Each
Code: 548259Each £27.45
Deb Stoko
Sun PROTECT Board
• Help to protect your workforce from
UV radiation by raising awareness
of the dangers of working in the
sun with the NEW all in one Deb
SunPROTECT Skin Safety Centre
• Pre-assembled with: Deb
SunPROTECT 1 litre lockable
dispenser, a mirror for easy
application, a holder and cards to
display the daily local UV index level,
and key facts and statistics on skin
cancer and instructions of WHY, HOW
and WHEN outdoor workers need to
protect themselves from the sun
• SSCSUN1EN - Size: n/a
• Packed in: Each
Code: 548264Each £90.55

STEP 1 – PROTECT
Washroom
Stokoderm Protect PURE
• Universal perfume-free, non-greasy pre-work skin
cream to help protect against contact with water
and non-water based contaminants including dry
powders
• UPW100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 548314 Each £2.17
• UPW1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548316 Each £15.69
Travabon Classic
• A specialist pre-work cream to protect against
heavy oil based and mechanical irritants
• Fat-free skin protection against oily and waterinsoluble
workplace substances
• Makes it easier to clean your skin after contact with
heavy-duty contamination
• TVC100ML - Size: 100ml bottle
• Packed in: Cartons of 12
Code: 431562 Each £3.61
• TVC1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 012820 Each £25.64
Stokoderm Grip PURE
• Specialist pre-work cream to protect against heavy
oil based and mechanical irritants and improve grip
• Versatile skin protection product for sensitive
skin exposed to changing, not clearly defined
dermatological stress
• Can also be applied for use under gloves
• SGP100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 431564 Each £4.04
• SGP1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431565 Each £30.25
Stokoderm Frost
• A special, easy to apply skin protection cream for
protection under cold conditions outside and indoors
(cold storage). High quality ingredients protect and
care for the skin and help to maintain the skin‘s
natural barrier function
• SFR100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 548291 Each £4.49
• SFR1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431566 Each £33.61
Deb Stoko Protect 1L Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed,
sealed cartridge dispensers that meet the distinct
needs of any workplace and public facility
environment
• For exclusive use with Deb skin care products to
create tailored skin protection and hand hygiene
programmes
• PRO1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 548384 Each £27.45
Stokoderm Foot Care
• Deodorising and caring foot spray that helps to
reduce skin swelling
• A special skin preparation spray containing alcohol
to help protect your feet, for instance when you
need to wear occlusive footwear
• SFC100ML - Size: 100ml bottle
• Packed in: Cartons of 25
Code: 548296 Each £2.68
187

Washroom
STEP 2 – CLEANSE WASHROOM
Refresh Clear FOAM
• Perfume-free and dye-free mild foam soap.
• For use in any washroom / toilet areas in
offices & public facilities and in food handling
environments
• CLR250ML - Size 250ml bottle
• Packed in: Cartons of 6
Code: 431567 Each £3.53
• CLR1L - Size 1L cartridge
• Packed in: Cartons of 6
Code: 548964 Each £10.09
• CLR12LTF - Size 1.2L (TF) cartridge
• Packed in: Cartons of 3
Code: 431568 Each £12.71
Refresh Azure FOAM
• Lightly perfumed gentle foam hand wash
• Pleasantly fragranced mild foam soap
• For use in any washroom / toilet areas in offices
and public facilities
• AZU1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548962 Each £10.09
• AZU12LTF- Size: 1.2L (TF) cartridge
• Packed in: Cartons of 3
Code: 548960 Each £12.71
• AZU2LT- Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548963 Each £18.11
Refresh Rose FOAM
• Luxurious, pleasantly fragranced, rich mild foam
soap, with added moisturisers
• For use in any washroom / toilet areas in offices
and public facilities
• RFW1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431851 Each £10.45
• RFW12LTF- Size: 1.2L (TF) cartridge
• Packed in: Cartons of 3
Code: 431569 Each £13.16
• RFW2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 431852 Each £18.79
Refresh Relax FOAM
• Fragrant foam hand wash with a rich blend of pure
essential oils
• For use in any washroom / toilet areas in offices
and public facilities
• RLX250ML - Size: 250ml bottle
• Packed in: Cartons of 6
Code: 431570 Each £3.55
• RLX1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 519259 Each £10.14
• RLX12LTF- Size: 1.2L (TF) cartridge
• Packed in: Cartons of 3
Code: 431571 Each £13.16
Refresh Relax LOTION
• Luxurious foam hand wash with ‘relaxing’ fragrance
• RCD1L- Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431853 Each £9.71
Refresh Energie FOAM
• Fragrant foam hand wash with a rich blend of pure
essential oils
• For use in any washroom / toilet areas in offices
and public facilities
• ENG250ML - Size: 250ml bottle
• Packed in: Cartons of 6
Code: 431572 Each £3.55
• ENG1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 519260 Each £10.14
• ENG12LTF- Size: 1.2L (TF) cartridge
• Packed in: Cartons of 3
Code: 431573 Each £13.16
188
188
Deb Stoko Cleanse Washroom 1L Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed, sealed cartridge dispensers that
meet the distinct needs of any workplace and public facility environment
• For exclusive use with Deb Cleanse Washroom foam soaps and shower products
• WRM1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 548946 Each £20.58
• WRM2LDPEN - Size: 2L dispenser
• Packed in: Each
Code: 431854 Each £43.85
TouchFREE Dispenser
• Attractively designed, power efficient touch free
dispensing system for use with Deb foaming hand
hygiene products
• Suitable for use in any public facility washroom
• Also, ideal for use in hallways, office and
reception / lobby areas in conjunction with Deb •
InstantFOAM ® hand sanitiser and dispenser stand
• Black & Chrome TouchFREE Dispenser
• TF2CHR - Size:1.2LTF dispenser
• Packed in: Each
Code: 431574 Each £53.50
• White TouchFREE Dispenser
• TF2WHI- Size:1.2LTF dispenser
• Packed in: Each
Code: 431575 Each £53.50
• Blue Transparent TouchFREE Dispenser
• TF2AZU- Size:1.2LTF dispenser
• Packed in: Each
Code: 431576 Each £53.50

STEP 2 – CLEANSE LIGHT / SHOWER
Washroom
Estesol Lotion PURE
• Perfume-free and dye-free light duty lotion hand cleanser for regular use to
remove general dirt and grime
• Suitable for general industrial and food manufacturing/ processing environments.
Use at the end of each work period or more frequently if required, to remove
everyday industrial and food related contaminants
• PUW1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548975 Each £7.94
• PUW2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548370 Each £9.08
• PUW4LTR- Size: 4L cartridge
• Packed in: Cartons of 4
Code: 548375 Each £17.26
Estesol Lotion
• Light duty lotion hand cleanser for regular use to remove general industrial
soilings
• Suitable for use in any industrial environment at the end of each work period or
more frequently if required, to remove everyday industrial dirt and grime
• LTW1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 012826 Each £7.94
• LTW2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548346 Each £9.08
• LTW4LTR - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 431855 Each £17.26
Estesol Orange LotionE
• Translucent, ‘citrus zest’ lotion hand cleaner with natural coconut oil
• Suitable for use in any industrial environment at the end of each work period or
more frequently if required, to remove everyday industrial dirt and grime
• DOP2000L - Size: 2L cartridge
• Packed in: Cartons of 6
Code: 548340 Each £9.15
• DOP4000L - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 548341 Each £17.33
Deb Stoko Cleanse Light 1L Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed, sealed cartridge dispensers that
meet the distinct needs of any workplace and public facility environment
• For exclusive use with Deb skin care products to create tailored skin protection
and hand hygiene programmes
• LGT1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 431856 Each £27.45
• LGT2LDPEN - Size: 2L dispenser
• Packed in: Each
Code: 548371 Each £43.85
• LGT4LDREN - Size: 4L dispenser
• Packed in: Each
Code: 548374 Each £55.56
189

Washroom
STEP 2 – CLEANSE HEAVY
Estesol Hair & Body
• Pleasantly fragranced rich all over hair & body
shower gel
• For use any in any workplace, leisure or hospitality
shower facility
• Suitable for use in both male and female shower
areas
• HAB250ML - Size: 250ml bottle
• Packed in: Cartons of 12
Code: 431578 Each £3.64
• HAB1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 519271 Each £9.80
• HAB2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 519274 Each £12.19
• HAB4LTR- Size: 4L cartridge
• Packed in: Cartons of 4
Code: 431579 Each £23.18
Deb Stoko Cleanse Shower 1L
Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed,
sealed cartridge dispensers that meet the distinct
needs of any workplace and public facility
environment
• For exclusive use with Deb skin care products to
create tailored skin protection and hand hygiene
programmes
• SHW1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 431857 Each £20.58
• SHW2LDPEN - Size: 2L dispenser
• Packed in: Each
Code: 548974 Each £43.85
• SHW4LDREN - Size: 4L dispenser
• Packed in: Each
Code: 431580 Each £55.56
Solopol Lime
• Patented combination of natural cornmeal and light
lime extracts
• For use at the end of each work period, or more
frequently if required, to remove heavy industrial
soilings, such as oil and grease, as well as general
dirt and grime
• LIM2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548377 Each £12.03
• LIM4LTR - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 548378 Each £17.26
190
190
Solopol GrittyFOAM
• The world’s first FOAM hand cleanser with
scrubbers, for medium-heavy soilings
• Rich-cream heavy duty FOAMING hand cleanser
with suspended, non-abrasive cornmeal bioscrubbersTM
for deep-cleaning action
• The rapid and effective cleansing action, combined
with excellent skin feel during and after use,
encourages compliance
• GPF3L - Size: 3.25L cartridge
• Packed in: Cartons of 4
Code: 548412 Each £34.17
Solopol Classic
• Solvent-free hand cleansing paste, for removal of
heavy duty contaminants
• A traditio+K152nal, solvent-free, pH skin neutral
hand cleanser containing scrubbing agent
• It features a powerful cleansing action coupled with
very good skin compatibility
• Solopol ® Classic contains a skin protectant and
re-fatting agent
• SOL250ML - Size: 250ml tube
• Packed in: Cartons of 12
Code: 548292 Each £3.00
• SOL2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548293 Each £15.45
• SOL4LTR - Size: 4L cartridg
• Packed in: Cartons of 4
Code: 012817 Each £29.36
Kresto Citrus
• Powerful citrus hand cleanser with Deb’s unique
patented combination of orange oil extracts and
cornmeal hand scrub
• For use at the end of each work period, or more
frequently if required, to remove a broad spectrum
of deeply ingrained and difficult to remove soilings
such as tar, inks, bitumen, many adhesives, most oil
based paints, oil, grease and grime
• CIT2LT - Size: 2L cartridge
• Packed in Cartons of 4
Code: 548376 Each £16.15
• CIT4LTR - Size: 4L cartridge
• Packed in Cartons of 4
Code: 548379 Each £30.71

STEP 2 – CLEANSE HEAVY
Washroom
Natural Power WASH
• Includes Debasol ® , Deb’s patented power of solvent
free, sunflower oil esters with cornmeal and ground
olive stone scrub to provide a highly effective
‘deep-clean’ performance
• Effective on most ingrained and difficult to remove
industrial soilings
• Contains moisturiser to help ensure regular use
does not affect skin hydration
• NPW2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 431858 Each £16.96
• NPW4LTR - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 431581 Each £32.25
Deb Stoko Cleanse Heavy 2L
Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed,
sealed cartridge dispensers that meet the distinct
needs of any workplace and public facility
environment
• For exclusive use with Deb skin care products to
create tailored skin protection and hand hygiene
programmes
• HVY2LDPEN - Size: 2L dispenser
• Packed in: Each
Code: 548372 Each £43.85
• HVY4LDREN - Size: 4L dispenser
• Packed in: Each
Code: 548373 Each £55.56
Kresto Universal WIPES
• Easy-to-use, heavy-duty wipes for general hand
cleaning, such as removing oil, grease and grime
• For use without water whilst on the move or at the
work point
• UNV150W - Size: 150 wipes
• Packed in: Cartons of 4
Code: 431582 Each £19.80
Kresto Special WIPES
• Easy-to-use hand cleansing wipes, impregnated
with a specialist formulation based on dibasic esters
to remove paints, inks, resins, adhesives and most
other print and paintshop contaminants
• ULT70W - Size: 70 wipes
• Packed in: Cartons of 6
Code: 431583 Each £12.60
• ULT150W - Size: 150 wipes
• Packed in: Cartons of 4
Code: 510118 Each £24.55
Kresto Special ULTRA
• Specialist ultra hand cleanser, to remove paints,
lacquers and adhesives
• Non-soapy special hand cleanser with a very
powerful cleansing action for the removal of
especially stubborn contamination
• Particularly good skin compatibility within the
product class of “special hand cleansers”
• KSP250ML - Size: 250ml tube
• Packed in: Cartons of 12
Code: 431585 Each £4.65
• KSP2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 431586 Each £28.73
• KSP4LTR - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 431587 Each £54.75
Deb Stoko Cleanse Ultra 2L Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed,
sealed cartridge dispensers that meet the distinct
needs of any workplace and public facility
environment
• For exclusive use with Deb skin care products to
create tailored skin protection and hand hygiene
programmes
• ULT2LDPEN - Size: 2L dispenser
• Packed in: Each
Code: 431859 Each £48.23
• ULT4LDREN - Size: 4L dispenser
• Packed in: Each
Code: 431860 Each £53.26
191

Washroom
STEP 2 – CLEANSE ANTIMICROBIAL / SANITISE
OxyBAC FOAM Wash
• A highly effective, perfume-free broad spectrum
antibacterial foam hand wash combining
• Accelerated Hydrogen Peroxide ® with Deb Foam
Technology
• For general use hand washing in food & catering
environment, or any other workplace, social care or
public facility where a high level of hand hygiene
is required
• Kills 99.999% of many common bacteria
• OXY1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548401 Each £12.53
• OXY12LTF - Size: 1.2L (TF) cartridge
• Packed in: Cartons of 3
Code: 431861 Each £13.57
• OXY2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548400 Each £25.05
OxyBAC Extra FOAM Wash
• A highly effective, perfume-free broad spectrum
antibacterial foam hand wash combining •
Accelerated Hydrogen Peroxide ® with Deb Foam
Technology and DoubleDOSE Pump
• For hygienic hand washing in ‘high-risk’ food
industry environments where:
1) a high standard of biocidal efficacy is required
to kill pathogens potentially detrimental for food
safety; and 2) provide a high level of cleaning
performance to remove greasy contaminants, such
as vegetable and animal oils; greases and fats; as
well as food ingredients and mixes, including flour,
pastry and dough
• OXYEX1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548403 Each £12.53
• OXYEX2LT - Size: 2L cartridge
• Packed in: Cartons of 4
Code: 548404 Each £25.05
Deb Stoko Antimicrobial 1L
Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed,
sealed cartridge dispensers that meet the distinct
needs of any workplace and public facility
environment
• For exclusive use with Deb skin care products to
create tailored skin protection and hand hygiene
programmes
• ANT1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 548405 Each £20.58
• ANT2LDPEN- Size: 2L dispenser
• Packed in: Each
Code: 548406 Each £43.85
192
192
Deb InstantFOAM Complete
• Highly effective broad spectrum alcohol based hand sanitiser dispensed as a foam
• The world’s first alcohol foam hand sanitiser proven to be fully virucidal
• Ideal for use in all healthcare and food handling environments where high levels
of hand hygiene are vital. Also, suitable for use in cafeterias, office areas, rest
areas and any public facility to help prevent the spread of germs
• DIS47ML - Size: 47ml bottle
• Packed in: Cartons of 12
Code: 548388 Each £2.81
• DIS250ML - Size: 250ml bottle
• Packed in: Cartons of 12
Code: 548387 Each £9.22
• DIS400ML - Size: 400ml bottle
• Packed in: Cartons of 12
Code: 548084 Each £9.00
• DIS1000ML - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548086 Each £13.53
• IFS1LTFEN - Size: 1L (TF) cartridge
• Packed in: Cartons of 3
Code: 548396 Each £16.63
Deb Stoko Sanitise
1L Dispenser
• Unique range of 1 litre, 2 litre and
4 litre closed, sealed cartridge
dispensers that meet the distinct
needs of any workplace and public
facility environment
• For exclusive use with Deb skin
care products to create tailored
skin protection and hand hygiene
programmes
• SAN1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 548391 Each £20.58
Deb Stoko InstantFOAM
1L Dispenser
• Attractively designed, power efficient
touch free dispensing system for
use with Deb foaming hand hygiene
products
• Suitable for use in any public facility
washroom. Also, ideal for use in
hallways, office and reception /
lobby areas in conjunction with Deb
InstantFOAM ® hand sanitiser and
dispenser stand
• INF01CON - Size: 1L dispenser
• Packed in: Each
Code: 548382 Each £20.58
• IFSTF2EN - Size: 1L TF dispenser
• Packed in: Each
Code: 548394 Each £53.50

STEP 4 – RESTORE
Washroom
Stokolan Light PURE
• A mild, perfume-free and dye-free non-greasy
after-work conditioning cream to help maintain
healthy skin and avoid dryness
• For use at the end of each work period to
moisturise the skin whilst natural oils are being
replenished. Suitable for use on dry, sore, chapped
or normal skin
• RES100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 431588 Each £2.55
• RES1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 548315 Each £17.12
Stokolan Light Gel
• Non-oily care gel with moisturising glycerine and
urea
• Fragranced moisturising gel for normal skin
• Contains creatine, which is found in the skin and
is known as the skin‘s own energy booster for
maintaining natural cell function
• Stokolan ® Light Gel is extremely easy to apply,
is very swiftly absorbed and does not leave any
unpleasant or annoying oily film on your skin
• SGE100ML - Size: 100ml Tube
• Packed in: Cartons of 12
Code: 431589 Each £2.95
• SGE1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431590 Each £18.33
Stokolan Classic
• Silicone-free skin care cream which is easy to
apply, is swiftly absorbed and does not leave any
unpleasant or annoying oily film
• Stokolan ® Classic has a proven track record in
helping to prevent occupational skin diseases and
in supporting their treatment. It contributes to
reducing skin irritations and it soothes the skin
• By simultaneously providing moisture and oils, it
enhances the natural regeneration of the skin, and
used regularly, it keeps the skin smooth and supple
• This helps to stop the skin becoming rough or dry -
which is the cause of many occupational diseases and
it maintains the natural protective function of the skin
• SCL100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 548294 Each £3.09
• SCL1L - Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431591 Each £19.20
Stokolan ® Sensitive PURE
• Perfume-free and colourless skin care cream
without preservatives, particularly suited for the
treatment of sensitive and allergy prone skin types.
Stokolan ® Sensitive PURE supports the natural skin‘s
barrier, promotes skin regeneration and smoothes
the skin
• The high amount of moisturising elements and skin
conditioning ingredients such as the skin’s own
energy booster, creatine, supports and strengthens
the skin’s defence system
• SSP100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 548295 Each £3.65
• SSP1L- Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431592 Each £22.70
Stokolan ® Intense
• Nurturing, regenerative and barrier active creamy
lotion containing grapeseed oil, ceramid complex,
allantoin, ginkgo biloba, urea and bees wax
• Stokolan ® Intense contains a high amount of lipids,
99 % of natural origin, reducing water loss and
enhancing skin elasticity
• The physiological lipids cholesterol and ceramid
support the self-regulatory processes of the skin
barrier
• SIN100ML - Size: 100ml tube
• Packed in: Cartons of 12
Code: 431593 Each £4.07
• SIN1L- Size: 1L cartridge
• Packed in: Cartons of 6
Code: 431594 Each £25.31
Deb Stoko Restore 1L Dispenser
• Unique range of 1 litre, 2 litre and 4 litre closed,
sealed cartridge dispensers that meet the distinct
needs of any workplace and public facility
environment
• For exclusive use with Deb skin care products to
create tailored skin protection and hand hygiene
programmes
• RES1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 548385 Each £27.45
193

Washroom
DEB STOKO SKIN SAFETY CENTRES
Deb Stoko Skin Protection Centre -
Small
• Robust, light-weight board that is ready-assembled
with appropriate Deb Stoko dispensers
• For use with Deb Stoko products to create a tailored
skin care system
• SSCSML1EN - Size: 590mm wide x 510mm high
• Contains: 1 x Deb Protect 1000, 1 x Deb Cleanse
Heavy 2000 and 1 x Deb Restore 1000 dispensers
• Packed in: Each
Code: 431595 Each £78.06
Deb Stoko Solopol GrittyFOAM Skin
Protection Centre - Small
• Robust, light-weight board that is ready-assembled
with appropriate Deb Stoko dispensers
• For use with Deb Stoko products to create a tailored
skin care system
• SSCSM1GF - Size: 590mm wide x 510mm high
• Contains: 1 x Deb Protect 1000, 1 x Deb
GrittyFOAM ® and 1 x Deb Restore 1000 dispensers
• Packed in: Each
Code: 548413 Each £76.06
Deb 2-Step Wash/Sanitise Skin
Hygiene Centre
• Robust, light-weight board that is ready-assembled
with appropriate Deb Stoko dispensers
• For use with Deb Stoko products to create a tailored
skin care system
• SSC2FWS - Size: Dimensions: 2-step 560mm (w) x
500mm (h)
• Pre-assembled board with 2 x 1000 dispensers
(Deb OxyBAC 1000 and Sanitise 1000 dispensers)
• Packed in: Each
Code: 431596 Each £53.49
Deb Stoko Skin Protection Centre -
Large
• SSCLGE1EN - Size: 800mm wide x 570mm high
• Contains: 1 x Deb Protect 1000, 1 x Deb Cleanse
Light 2000, 1 x Deb Cleanse Heavy 4000 and 1 x
Deb Restore 1000 dispensers
• Packed in: Each
Code: 548343 Each £102.60
Deb Stoko Solopol GrittyFOAM Skin
Protection Centre - Large
• SSCLG1GF - Size: 800mm wide x 570mm high
• Contains: 1 x Deb Protect 1000, 1 x Deb Cleanse
Washroom 2000, 1 x Deb GrittyFOAM ® and 1 x Deb
Restore 1000 dispensers.
• Packed in: Each
Code: 548414 Each £99.95
Deb 3-Step Wash/Sanitise/Restore
Skin Hygiene Centre
• Robust, light-weight board that is ready-assembled
with appropriate Deb Stoko dispensers
• For use with Deb Stoko products to create a tailored
skin care syste
• SSC3FWSC - Size: Dimensions: 769mm (w) x
455mm (h)
• Pre-assembled board with 3 x 1000 dispensers
(Deb OxyBAC 1000, Sanitise 1000, and Restore
1000 dispensers)
• Packed in: Each
Code: 431597 Each £59.90
194
194
Skin Safety Cradle for Mobile Workers
• A unique skin safety solution for vehicles and areas of limited space, the Deb
Skin Safety Cradle is a compact and complete 3-step skin care system
• It can be conveniently fitted inside vans or work cabins and contains everything
needed to protect, cleanse and sanitise the skin
• The products do not require running water
• The dispensing unit holds all three cradle cartridges. The unit is tough and made
from robust plastic for high durability
• No mechanical parts, means low maintenance
• Unit is pre-drilled in four places for ease of fixing. (Cartridges supplied
separately.)
• ACC729 - Size: Cradle dimensions: 260(h) x 307(w) x 93(d)mm
• Packed in: Each
Code: 510034 Each £34.58

SWARFEGA
Washroom
Swarfega Original Classic
• Rapid action classic smooth green gel formula hand
cleanser with added conditioner which is easy to
apply and quick rinsing to remove ingrained oil,
grease and general grime • Leaves the skin feeling
smooth after use
• SWA450MP - Size: 450ml pump top bottle
• Packed in: Cartons of 6
Code: 510103 Each £4.99
• SWA45L- Size: 4.5L tub
• Packed in: Cartons of 4
Code: 431862 Each £20.50
• SWA125KG- Size: 1.5L pail
• Packed in: Each
Code: 431863 Each £50.38
Swarfega Orange
• Advanced formulation hand cleaner with polygrains.
Natural citrus oil removes oil, grease and general
soilings quickly and efficiently
• Contains moisturiser to help care for skin. The pump
encourages controlled dosages, one push is enough
for a hand wash and prevents product from crosscontamination
• SOR4LMP - Size: 4L pump top bottle
• Packed in: Cartons of 4
Code: 510130 Each £19.09
• SORC4LTR - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 510811 Each £25.93
• SOR15L - Size: 1.5L pail
• Packed in: Each
Code: 510132 Each £68.28
Swarfega Heavy
• Heavy duty gel formula hand cleaner containing
non-abrasive micro-polymer granules and added
conditioner to quickly remove deeply ingrained oil
and grease soilings
• Leaves skin feeling smooth after use
• SHD45L - Size: 4.5L tub
• Packed in: Cartons of 4
Code: 510150 Each £22.15
• SHD125KG - Size: 15L pail
• Packed in: Each
Code: 510151 Each £53.54
Swarfega Lemon
• Solvent-free lemon hand cleaner which includes
natural cornmeal hand scrub to remove oil, grease
and general soilings quickly and effectively
• Contains moisturiser to help care for skin
• The pump encourages controlled dosages, one push
is enough for a hand wash and prevents product
from cross-contamination
• SWL4LMP: Size: 4L pump top bottle
• Packed in: Cartons of 4
Code: 431864 Each £20.50
• SWL4LTR - Size: 4L cartridge
• Packed in: Cartons of 4
Code: 510147 Each £23.94
• SWL15L - Size: 15L pail
• Packed in: Each
Code: 431865 Each £75.83
Swarfega Jizer
• Parts degreaser that will quickly dissolve heavy
deposits of mineral oil, grease, tar, bitumen and
waxes
• Water rinsable, can be used for removing oil and
grease marks from many floor surfaces, tar spots
and oil from body work and cleaning paint brushes
• SJZ500ML - Size: 500ml aerosol
• Packed in: Cartons of 12
Code: 516306 Each £6.51
• SJZ5L - Size: 5L tin
• Packed in: Cartons of 4
Code: 516315 Each £22.33
• SJZ25L - Size: 25L tin
• Packed in: Each
Code: 516320 Each £89.86
Swarfega Duck Oil
• A silicone-free, non-conductive, multi-purpose
service spray. Exceptionally low surface tension
means it can easily penetrate, lubricate and protect
with no need to dismantle machinery and parts
• SDO500ML - Size: 500ml aerosol
• Packed in: Cartons of 12
Code: 760696 Each £6.56
• SDO5L - Size: 5L spray bottle
• Packed in: Cartons of 4
Code: 760684 Each £38.97
195

First Aid
Buying Guide
Is Your First Aid Kit Up To Date?
BS8599-1 COMPLIANT - WORKPLACE KIT
In the past decade, workplace practice has radically changed in many
industries. These changes in working behaviour and environments have
brought with them new risks and hazards for employees. June 2011
saw the introduction of fresh, updated guidance that now accurately
reflects best practice. A new range of kits was introduced and the
recommendations came into full force in January of 2012. The new
BS8599-1 kits represent a complete overhaul of the 1997 content and it
is now incumbent on all businesses to review their first aid kits to ensure
they remain fit for purpose.
Health & Safety
The Health and Safety (First Aid) Regulations 1981 require you to provide
adequate and appropriate first-aid equipment, facilities and people so your
employees can be given immediate help if they are injured or taken ill at work.
What is ‘adequate and appropriate’ will depend on the circumstances in your
workplace and you should assess what your first aid needs are.
The minimum first aid provision on any work site is:
• A suitably stocked first-aid box
• An appointed person to take charge of the first aid arrangements
• Information for employees about first aid arrangements
It’s is important to remember that accidents and illnesses can happen at any
time. First aid provision needs to be available at all times to people that are at
work.
You should use the guide below, together with your risk assessment,
to decide on the size and placement of first aid kits in your workplace.
The contents of the first aid containers should be examined frequently and
restocked after use. Sufficient back up supplies should be held on site.
Employers are required to
undertake a risk assessment
to determine what the
hazard levels are and
how many employees are
involved in the specific area
to be covered.
Here is a useful guide
provided to help you match
the assessment to an
appropriate kit.
CATEGORY OF HAZARD
LOW HAZARD
E.G. Shops, offices, libraries etc.
HIGH HAZARD
E.G. Light engineering and
assembly work, food processing, warehousing, extensive work with dangerous
machinery or sharp instruments, construction, chemical manufacture etc.
No. OF
EMPLOYEES
Less than 25
25-100
More than 100
Less than 5
5-25
More than 25
SIZE OF FIRST
AID KITS
Small
Medium
Large (1 per 100 employees)
Small
Medium
Large (1 per 25 employees)
New Product
Torch First Aid Kit
See page 198
196
196

197

First Aid
HSE First Aid Kits
Standard Hse 10-Person First Aid Kit
• For small shops, offices, libraries
• Polypropylene box with wall fixing bracket
• Size: 180×270×90mm
Code: 254868Each £19.99
Standard Hse 20-Person First Aid Kit
• For light engineering, assembly work, warehousing
(perhaps with fewer than 20 people)
• Polypropylene box with fixing bracket
• Size: 225×275×90mm
Code: 254865Each £30.99
Standard HSE 50-Person First Aid Kit
• For construction sites, manufacturing, engineering
workshops
• Polypropylene box with carrying handle and wall
bracket
• Size: 255×345×100mm
Code: 254864Each £49.99
Lyon Fast Response
First Aid Kit
• For major incidents and emergencies
• Essential in high risk or expansive
working areas
• Size: 370×370×90mm
Code: 254968Each £45.49
BS 8599-1 Integral Aura Small First
Aid Kit
• Low Risk: 1 kit per 1 – 25 employees
• High Risk: 1 kit per 1 – 5 employees
• Size: 225×235×100mm
Code: 254813Each £56.49
BS 8599-1 Integral Aura Medium
First Aid Kit
• Low Risk: 1 kit per 25 – 100 employees
• High Risk: 1 kit per 5 – 25 employees
• Size: 280×300×105mm
Code: 254814Each £71.49
BS 8599-1 Integral Aura Large First
Aid Kit
• Low Risk: 1 kit Per 100 employees
• High Risk: 1 kit Per 25 employees
• Size: 330×360×105mm
Code: 254815Each £86.99
198
198
Torch First Aid Kit
• Ideal for holiday use, camping or driving
• Impact resistant plastic case with carry handle
• Integrated torch
Code: 254882 Each £12.99
Van and Truck First Aid Kit
• Neat, small polypropylene box
• Clip-on mounting bracket for fixing into a vehicle
• Size: 180×130×70mm
Code: 254809Each £19.99
First Aid Burns Kit
• A compact, modern comprehensive burns kit
• Ideal for small offices, kitchens or other areas
where burns present a hazard
• Includes adult foil blanket
• Size: 167×229×42mm
Code: 254960Each £18.99

HSE First Aid Kits
First Aid
Reliwash Eye Wash First Aid Kit (Double)
• 904 - 2×500ml bottles, 2×20ml eye pods, 2×eye pads, mirror
• Size: 280×300×105mm
Code: 254699Each £40.99
Reliwash Eye Wash First Aid Kit (Triple)
• 903 - 3×500ml saline eye wash, 3×eye pad dressings
• Size: 280×300×105mm
Code: 254691 Each £41.99
Winter Care Kit
• Car essentials in the cold
• Winter car essentials to keep you moving
• Life saving contents, including first aid
• Useful items in emergency or breakdown
• Packed in a stylish box
Code: 254688Each £34.99
Complete Refill for Standard First
Aid Kit
• 10 Person
Code: 254866Each £14.99
• 20 Person
Code: 254869Each £27.49
• 50 Person
Code: 254873 Each £37.49
Hse Single Person First Aid Kit
• Vinyl wallet – for anyone working away from base
• All representatives, delivery drivers, council
workers etc. Must be provided with a first aid kit
• Size: 160×180mm
Code: 254867Each £6.99
Travel Pouch First Aid Kit
• Handy general purpose first aid kit, easily fitting
a car
• More than covers HSC requirements for one person
• Washable nylon fabric bag, zip closure
• Size: 121×193×52mm
Code: 254810Each £17.99
Eye Wash Kits
Premier Eye Wash Station
• 919
• Robust dual purpose HSE compliant eye wash
station
• Illuminated printed instructions
• Dustproof heavy-duty cover
• Wipe clean hardwearing ABS Plastic
• 2×saline eyewash 500ml, 2×eyepad dressings,
5×pods 20ml, mirror
• Size: 360×510×100mm
• Colour: Green/Clear Lid
Code: 254696Each £36.49
Emergency Eye Wash Station
• 906
• Holds 2×500ml sterile saline solution eye wash
bottles, 2×eye pad dressings, mirror
• Panel with printed instructions
• Size: 270×375×50mm
Code: 254697Each £33.49
Eye Pod Station
• High visibility eye pod station with printed
instructions
• Holds 8×20ml sterile saline solution eye pods,
2×eyepad dressings, mirror
• Supplied empty as a panel
• Eye pods should never be used for emergency use
• Use for minor eye irritations only
• Size: 245×330×25mm
Code: 254689Each £9.99
199

First Aid
First Aid Consumables
Keep Safe Fabric First Aid
Plasters
• Assortment containing: 30 of
25×50mm, 30 of 20×70mm, 30 of
40×40mm,10 of 50×75mm
• Box of 100
Code: 254800 Per Box £8.49
Keep Safe Wash Resistant
Plasters
• Assortment containing: 30 of
25×50mm, 30 of 20×70mm, 30 of
40×40mm, 30 of 50×75mm
• Box of 100
Code: 254801 Per Box £8.49
Keep Safe Detectable
Plasters for Food
Preparation Areas
• Metal detectable washproof plasters
• Sterile and individually wrapped
• Low allergy, latex free each pack
contains: 30 of 25×75mm, 30 of
20×70mm, 30 of 40×40mm, 10 of
50×75mm
Code: 254802 Per Box £10.99
Easi-Plaster Roll
• Fast, easy alternative to plasters
• Easy-tear to size, waterproof plasters
• Adhesive Free
Code: 254972 Per Box £5.99
Sterile Dressings
• All dressings are HSE compliant
• Medium
• Size: 120×120mm
Code: 254884 Each £0.59
• Large
• Size: 180×180mm
Code: 254859 Each £0.79
No. 16 Eye Pad Sterile
Dressing
Code: 254857 Each £0.59
Triangular Bandage
• Size: 90×1270mm
Code: 254687Each £0.39
Reliwipe Sterile Cleaning
Wipes
• Moist saline cleansing wipes
Code: 510175 Box of 100 £19.49
Emergency Foil Blanket
For Adults
• Disposable, ultra-insulating
emergency blanket
• Both sides have heat-reflective
metallic surface
• Retains over 90% of body heat
• Retains most radiated body heat
• Also protects against wind, rain
• Ideal for treating or preventing
hypothermia
• Size: 1950×1200mm (78×48")
Code: 254838 Each £5.99
200
200
Antiseptic Wipes
• Individually sealed sachets of moist
tissues impregnated with antiseptic
ingredients
• Hygienically cleans the skin
• Protects against germs
• Convenient, easy to use
Code: 548273 Pack of 10 £2.49
Reliwash Saline Eye Wash
Bottle with Eyewash Bath
Lid - 500ml
• 2990
Code: 254693Each £5.99
Reliwash Saline Eye Wash
Solution - 500ml
• 900
Code: 254695Each £4.99
Reliwash Sterile Saline
Pods - 20ml
• 901 - Size: 20ml
Code: 254834 Pack of 25 £18.99
First Aid Accident Report
Book
• Forty forms on perforated pages
• Confidential storing of completed
records
• In line with the Data Protection Act
1998
• Size: A4
Code: 254971Each £8.49
Metal Lockable Cabinet
Hse 50-Person Plus First
Aid Kit
• Wall-mounting, lockable metal cabinet
• For construction, chemical,
dangerous machinery sites
• High specification
• Standard 50 kit plus extras, Inc.
2×foil emergency blankets
• Size: 450×300×120mm
Code: 254872 Each £143.99

Index
3M Air Fed System . . . . . . . . 112-116
3M Protective Coveralls. . . . . . . . . 16
3M Disposable Masks. . . . . . . . 94-101
3M Face Fit Testing Kits . . . . . . . . . 124
3M E.A.R Hearing Protection . . . 166-178
3M Jupiter Respirator . . . . . . . . . 114
3M Peltor Hearing Protection. . . 175-178
3M Powered Air. . . . . . . . . . 112-116
3M Safety Eyewear . . . . . . . . 132-150
3M Solus Eyewear . . . . . . . . . . . 132
3M Versaflo . . . . . . . . . . . . 113-116
A
Ansell Hand Protection . . . . . . . 42-64
Ansell Disposable Gloves . . . . . . 57-58
Ansell Chemical Gloves . . . . . . . .60-63
B
Bandages . . . . . . . . . . . . . . . 200
Banded Ear Plugs . . . . . . . . . . . . 174
Beard Masks . . . . . . . . . . . . . . 19
BlazeTEK Flame Retardant Clothing. . . 10
Body warmers . . . . . . . . . . . . . . 5
Bolle Safety Eyewear . . . . . . . 128-142
Bolle Safety Goggles . . . . . . . 143-151
Bolle Eyewear Accessories . . . . . . 153
Boot Polish . . . . . . . . . . . . . . . 91
Boots, Safety . . . . . . . . . . . . 68-82
Boots, Wellingtons . . . . . . . . . .84-87
Browguard . . . . . . . . . . . . 146-147
Bump Caps . . . . . . . . . . . . . . 161
C
Canadian Style Rigger Gloves. . . . . . 49
Catersafe . . . . . . . . . . . . . . 18-19
Caps, Bump . . . . . . . . . . . . . . 161
Centurion Safety Baseball Bump Caps . 161
Centurion Helmet Accessories . . . . . 162
Centurion Safety Helmets. . . . . 156-160
Centurion Forestry Protection. . . . . . 160
Chemical Resistant Gloves . . . . . .60-63
Chemical Resistant Coveralls . . . . .11-13
Cold Store Gloves . . . . . . . . . . . . 65
Communication Headsets. . . . . . . . 175
Cotton Gloves . . . . . . . . . . . . . . 48
Coveralls . . . . . . . . . . . . . . . 9-16
Cut Resistant Gloves . . . . . . . . . 51-53
Cut Resistant Gloves - Kevlar . . . . . . 54
Cut Resistant Colour Coded Gloves . 51-52
D
Deb Cradle System . . . . . . . . . . 194
Deb Skincare System . . . . . . . 186-193
Detectable Ear Plugs . . . . . . . . . . 171
Dewalt Safety Footwear . . . . . . .76-80
Disposable Coveralls . . . . . . . . . 11-16
Disposable Gloves. . . . . . . . . . .55-59
Disposable Overshoes . . . . . . . . . 19
Drager Disposable Respirators . . . 94-100
Drager Parat Escape Hood . . . . 122-123
Drager Parat Half Mask . . . . . . . . . 123
Drager Powered Respirators . . . 120-121
Drager X-Plore . . . . . . . . . . 120-121
Dr. Martens Safety Footwear . . . . 75-83
Dunlop Safety Footwear . . . . . . .85-87
DuPont, Tyvek Coveralls . . . . . . . 11-14
DuPont, Tychem Coveralls . . . . . . . 11
Duraflow Respiratory . . . . . . . 117-118
E
Ear Muffs . . . . . . . . . . . . . 175-179
Ear plugs . . . . . . . . . . . . . 166-174
Ear Plug Dispensers . . . . . . . . 172-173
Elipse Respirators . . . . . . . . . 102-103
Endurance Workwear . . . . . . . . 22-35
Endurance RainMaster . . . . . . . . . 22
Eyewear Accessories . . . . . . . 152-153
Eyewear, Safety . . . . . . . . . . 128-151
Eyewash Stations . . . . . . . . . . . 199
F
Faceshields . . . . . . . . . . . . 146-147
Face Fit Testing Kits . . . . . . . . . . . 124
Fall Arrest Kits. . . . . . . . . . . 182-183
Filters . . . . . . . . . . . . . . . 106-120
First Aid Kits. . . . . . . . . . . . 198-200
Fit Test Kits . . . . . . . . . . . . . . . 124
Flame Retardant Workwear . . . . . 9-10
Fleece Jackets . . . . . . . . . . . . . 26-27
Flexothane Weatherwear . . . . . . . 22-23
Foam Ear plugs . . . . . . . . . . 166-169
Foam Knee Pads . . . . . . . . . . . 29-30
Foam Nitrile Gloves . . . . . . . . . . 42-43
Food Industry Clothing . . . . . . . . 18-19
Food Processing Gloves . . . . . . . .55-56
Footwear Accessories . . . . . . . . . . 91
Forestry Protection . . . . . . . . . . . 160
Full Face Mask Respirators . . . . 107-109
G
Gauntlets . . . . . . . . . . . . . . 50-64
General Handling Gloves . . . . . . . . 48
GO/RT Hi-Visibility Clothing. . . . . . . . 7
Goggles & Visors . . . . . . . . . 143-151
Goggles - Non Vented . . . . . . 150-151
Goggles - Vented . . . . . . . . . 148-149
GVS Elipse - Reusable Respirators
- Half Masks. . . . . . . . . . . . 102-103
Gritty Foam Handwash . . . . . . . . 190
H
Hair Nets . . . . . . . . . . . . . . . . 19
Half Mask Respirators. . . . . . . 102-105
Hand Protection. . . . . . . . . . . .38-65
Head Protection. . . . . . . . . . 156-163
Hearing Protection . . . . . . . . 166-179
Heat Resistant Gloves. . . . . . . . . . 64
Helmet Accessories . . . . . . . . 162-163
Helmets, Safety . . . . . . . . . . 156-163
Hi-Visibility Clothing. . . . . . . . . . . 4 -7
Hi-Visibility Tyvek Coveralls . . . . . . . 11
Honeywell Safety Eyewear . . . 132-147
Honeywell Safety Faceshields . . . . . 147
Honeywell Gloves. . . . . . . . . . .38-65
Household Gloves. . . . . . . . . . . . 56
Howard Leight Hearing Protection 166-174
Hybrid Goggles/Spectacles . . . . . . . 144
I
Industrial Gloves . . . . . . . . . . .38-65
Insoles. . . . . . . . . . . . . . . . . . 91
J
Jackets, Fleece . . . . . . . . . . . . 26-27
Jackets, Hi-Visibility . . . . . . . . . . .4-6
Juba Hand protection . . . . . . . . 38-65
K
Keep Safe Coveralls . . . . . . . . . 12, 15
Keep Safe Disposable Respirators . 95-100
Keep Safe Ear Muffs . . . . . . . . . . 179
Keep Safe Hearing Protection. . . 167-179
Keep Safe Hi-Visibility Clothing . . . . . 4-7
Keep Safe Gloves . . . . . . . . . . 38-65
Keep Safe Respirators. . . . . . . . 95-100
Keep Safe Safety Eyewear . . . . 130-142
Keep Safe Safety Goggles . . . . 143-151
Index
201

Index
Index
Keep Safe Safety Helmets . . . . 156-159
Kevlar Gloves . . . . . . . . . . . . . . 54
Kimberley Clark Kleenguard Coveralls . 12
Knee Pads. . . . . . . . . . . . . . . 29-30
L
Ladies Safety Footwear . . . . . . . .88-90
Lanyards. . . . . . . . . . . . . . . . . 183
Latex Coated Gloves . . . . . . . . .46-47
Latex Disposable Gloves . . . . . . .55-57
Lens Cleaning Accessories . . . . 152-153
M
Miller Fall Arrest Kits . . . . . . . 182-183
Modern Safety Spectacles . . . . 131-141
Moldex Disposable Respirators . . . 95-101
Moldex Half Mask Respirators . . 102-105
Moldex Hearing Protection . . . . 167-177
Moulded Ear Plugs . . . . . . . . . . . 170
N
Nitrile Coated Gloves . . . . . . . . 39-45
Nitrile Disposable Gloves . . . . . . 55-59
O
Overshoe - Safety. . . . . . . . . . . . 91
Overboots - Tyvek. . . . . . . . . . . . 17
Overshoes. . . . . . . . . . . . . . . . 19
Oversleeves . . . . . . . . . . . . . . . 18
P
Peltor Ear Defenders . . . . . . . 175-178
Plasters . . . . . . . . . . . . . . . . 200
Polo Shirts. . . . . . . . . . . . . . . . 25
Polyco Grip it Gloves . . . . . . . . . . 41
Polyco hand protection . . . . . . . 38-63
Premium Eyewear . . . . . . . . 128-131
Premium Safety Helmets . . . . . 156-158
PVC Gauntlets . . . . . . . . . . . . . . 50
R
Rail Hi-Visibility Clothing . . . . . . . . . 7
Rainwear . . . . . . . . . . . . . . 22-24
Respair Disposable Respirators . . . 94-101
Respirators . . . . . . . . . . . . . 94-123
Reusable Respirators
- Half Masks. . . . . . . . . . . . 102-107
Reusable Respirators
- Full Face Masks . . . . . . . . . 107-109
Rigger Boots . . . . . . . . . . . . . 76-77
Rigger Gloves . . . . . . . . . . . . . . 49
Rockfall Safety Footwear . . . . . . 69-90
Roots Flamebuster Coveralls . . . . . . . 9
Roots Flamebuster Workwear . . . . . 10
S
Safety Eyewear . . . . . . . . . . 128-151
Safety Footwear. . . . . . . . . . . .68-90
Safety Goggles . . . . . . . . . . 143-151
Safety Harnesses . . . . . . . . . 182-183
Safety Helmets . . . . . . . . . . 156-160
Safety Lanyards . . . . . . . . . . . . . 183
Safety Trainers . . . . . . . . . . . .80-81
Scott Safety Bump Caps . . . . . . . . 161
Scott Safety Goggles . . . . . . . 148-151
Scott Safety Helmet liners . . . . . . . 163
Scott Safety Helmets . . . . . . . . . 158
Scott Respirators . . . . . . . . . 104-109
Scott Tornado . . . . . . . . . . . . . . 119
Scott Duraflow . . . . . . . . . . 117-118
Scott Gas Detection . . . . . . . . . . . 125
Shirts, T . . . . . . . . . . . . . . . . . 25
Shoes Safety . . . . . . . . . . . . .73-83
Showa Gloves . . . . . . . . . . . . .38-63
Skytec Ninja Lite . . . . . . . . . . . . 38
Skytec Ninja Flex . . . . . . . . . . . . 46
Skytec Utah . . . . . . . . . . . . . . . 59
Spectacle Cases . . . . . . . . . . 152-153
T
Thermal Gloves . . . . . . . . . . . . . 65
Tornado Respiratory System . . . . . . 119
Trousers, Work . . . . . . . . . . . . 28-29
T-Shirts . . . . . . . . . . . . . . . . . 25
Tuf Footwear . . . . . . . . . . . . .68-84
Tuf Revolution Footwear . . . . . . .78-81
Tychem Coveralls . . . . . . . . . . . . 11
Tyvek Coveralls . . . . . . . . . . . .11-14
U
Uvex Footwear . . . . . . . . . . . . 72-89
Uvex Gloves. . . . . . . . . . . . . . . 50
Uvex Hearing Protection . . . . . 168-171
Uvex Respirators . . . . . . . . . . 96-100
Uvex Safety Eyewear . . . . . . . 130-150
Uvex Safety Eyewear Accessories. . . . 152
Uvex Safety Spectacles & Goggles 130-150
Univet Safety Eyewear . . . . . . 130-131
V
Vinyl Disposable gloves. . . . . . . .55-57
Visors . . . . . . . . . . . . . . . . . 143
W
Waders . . . . . . . . . . . . . . . . . 84
Waistcoats, Hi-Visibility . . . . . . . . . 6-7
Weather Wear. . . . . . . . . . . . . 22-24
Welding Gloves . . . . . . . . . . . . . 64
Wellington Boots . . . . . . . . . . 84-87
White Safety Footwear . . . . . . . .83-87
Workwear . . . . . . . . . . . . . . . 25-35
202
202

www.larchfield-aerospace.com
Telephone: +44 (0)1732 369757
Email: sales@larchfield-aerospace.com
Fax: +44 (0)1732 369767
Larchfield Aerospace & Graphics Division
3 Tannery Road
Tonbridge
Kent
UK
TN9 1RF