User Guide Pulpmatic Uno V2.1
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8.2 Lid and chamber seal<br />
The lid area and rubber seal of the machine must be cleaned on a daily basis. Use a mild<br />
non-abrasive detergent on a soft cloth such as “Hygenex Surface Spray Sanitiser” to clean<br />
these surfaces.<br />
<br />
Press the footswitch to open the lid.<br />
<br />
Turn OFF the electrical power using the local electrical isolator; this will stop the lid<br />
closing automatically or false activation of the START sensor during the cleaning<br />
process.<br />
<br />
Clean the upper and lower sections of the lid, paying attention to the lower outer rim of<br />
the lid.<br />
<br />
Clean the rubber chamber seal; both the upper and lower faces.<br />
<br />
Once the unit has been cleaned, turn the power ON; allow the lid to close<br />
automatically.<br />
Clean lower outer rim of lid once a day.<br />
Clean rubber seal once a day.<br />
The lower outer rim of the lid (indicated above) and the chamber seal must be<br />
cleaned every day. This will ensure the machine remains clean, eliminates accidental<br />
spills and bacterial spores<br />
Copyright © 2015 DDC Dolphin Ltd. Page 27 of 36 December 15 UG-<strong>Uno</strong>-<strong>V2.1</strong>
Change language