User Guide Pulpmatic Uno V2.1

More documents

Recommendations

Info

Symptom Possible Cause Action Water is leaking from the lid Check the lid seal is clean. Check and clean the underside of the lid and make sure the outer rim is clean Check the rubber lid seal is clean and free from debris If the fault persists contact DDC Dolphin or an authorised support agent for assistance Please contact DDC Dolphin or your approved support agent if you are unable to resolve a problem Copyright © 2015 DDC Dolphin Ltd. Page 32 of 36 December 15 UG-Uno-V2.1
10. Warranty All DDC Dolphin products are carefully designed, manufactured, tested and inspected. Consequently, we undertake to replace or repair, free of charge, any part found to be defective in material or workmanship within the warranty period of the product. The manufactures warranty starts on the date of delivery to the original purchaser of this product. This product must be commissioned by an approved DDC Dolphin engineer, if this is within 30 days of deliver. The warranty is effective from the date of commissioning date rather than the date of delivery. Each DDC Dolphin Pulpmatic macerators must be maintained every 6 months. DDC Dolphin or your authorised support agent will provide cost options to test, inspect, calibrate and maintain the serviceable parts of the machine in line with the manufactures guidelines. 10.1 Exclusions from Product Warranty and Extended Warranty Replenishment of all consumable items (for example but not limited to): Detergent, disinfectant, scale inhibiting or any other chemical used in the machine. Maceratable products. Hygienic wipes. Any other disposable product used in the cleaning, care or operation of the DDC Dolphin products. Call outs, remedial works & warranty claims resulting from: Operator error, lack of reasonable care, accidental damage. Misuse; it is imperative to use the machine as instructed in the user guide. Items placed inside the machine must be suitable for the purpose and in-line with the manufacturer’s instructions. Damage to the machine surfaces resulting from the use of unsuitable cleaning products such as acid based or abrasive materials. Lack of regular cleaning in line with manufactures recommendations. The use of spares or chemicals not approved by DDC Dolphin. Incorrect installation or commissioning by persons not approved by DDC Dolphin. Repairs or servicing carried out by persons not approved by DDC Dolphin. Failure or reduction of the electrical and/or water supply. Failure or blockage of the host drainage system. Incorrect loading of the machine. Copyright © 2015 DDC Dolphin Ltd. Page 33 of 36 December 15 UG-Uno-V2.1
Page 1 and 2: User Guide Pulpmatic® Uno Macerato
Page 3 and 4: 7.12 Emergency action .............
Page 5 and 6: 3. Cautionary notes Failure to read
Page 7 and 8: 4.5 Programmable speaker (optional)
Page 9 and 10: 6. Operation 6.1 How it works The D
Page 11 and 12: Upper chamber Cutting disc & blades
Page 13 and 14: 6.3 Non-maceratable items Detailed
Page 15 and 16: 6.5 Operating Instructions DDC Dolp
Page 17 and 18: Starting the Machine - Fully-automa
Page 19 and 20: 6.8 Wipes & toilet paper DDC Dolphi
Page 21 and 22: 7.3 Lid operation The operation of
Page 23 and 24: 7.7 Changing the chemical bottle (o
Page 25 and 26: 7.13 Wall poster Copyright © 2015
Page 27 and 28: 8.2 Lid and chamber seal The lid ar
Page 29 and 30: 9. Fault codes Symptom Possible Cau
Page 31: Other Faults Symptom Possible Cause
Page 35 and 36: 11. Contact details Company Name: D

User Guide Pulpmatic Uno V2.1

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?