MU_STRATOS_ENG_HI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. Installation of the system<br />
THREADED PIPE<br />
1. Apply a sealing paste for pipes or Teflon tape on all male<br />
threaded pipes.<br />
2. Tighten all threaded connections.<br />
CPVC PLASTIC PIPE<br />
1. Clean, prepare and glue all joints according to the<br />
manufacturer’s instructions.<br />
OTHER<br />
Please follow the instructions from the pipes’ manufacturer<br />
when using other types of pipes and fixtures approved for<br />
drinking water.<br />
INSTALLATION OF THE DRAIN<br />
Measure and cut the necessary length, and then connect the<br />
drain line of ½” to the accessory for the drain connection of<br />
the water softener. Fasten the hose with a clamp.<br />
NOTE: Hook the hose of the drain to the underground drain.<br />
Tighten the drain hose. This will prevent any pipe whip<br />
during regenerations.<br />
HOW TO INSTALL THE ELBOW OF THE OVERFLOW<br />
DRAIN OF THE SALT TANK<br />
This programmers will provide you with information concerning<br />
the operation of the system, as well as allowing you to set up<br />
all parameters.<br />
MAIN FEATURES:<br />
User-friendly and intuitive programming.<br />
Multicolour interactive digital display.<br />
Holiday Mode<br />
Here the desired regeneration can be chosen by time, delayed,<br />
immediate or mixed.<br />
<strong>MU</strong>LTICOLOUR LCD DISPLAY: It shows the information concerning<br />
the state of the system. Depending on each moment, the<br />
display will show different types of messages:<br />
Service: It offers information concerning the operation of the system.<br />
15:57<br />
Last Regen. : jul. 01, 2012<br />
Mode: Meter Override<br />
Capacity<br />
Remaining<br />
Flow<br />
Rate<br />
Regeneration: It shows the regeneration stage of the system and<br />
the remaining time. It shows as well the current time.<br />
21:02<br />
Connect the overflow drain elbow from the system to a near<br />
drain. This drain intake must be at a lower height than the<br />
overflow drain.<br />
Advancing to<br />
Backwash<br />
NOTE: The overflow hose must be installed in such way<br />
that water cannot return from the drain hose.<br />
6.3 <strong>STRATOS</strong> Programmer<br />
Programming: It shows the internal parameters and allows its<br />
modification.<br />
DESCRIPTION OF THE PROGRAMMER<br />
All systems have a built-in state-of-the-art electronic programmer<br />
with a multicolour interactive display. This advanced controller<br />
allows to fully monitor the operation of the system. The<br />
display is installed on the upper part of the compact cabinet.<br />
Time<br />
Holiday<br />
Mode<br />
Region &<br />
Language<br />
Advanced<br />
Settings<br />
Hardness &<br />
People<br />
System<br />
Information<br />
16