2jkahFp

Other electrical measurement devices
Measurement devices
Indicators &
transducers
trans_071_a_2_cat
Transducers
They provide conversion of an AC electrical value (A, V, Hz, Cos phi, W, Var)
into a DC signal, with standardised current or voltage.
They are available in surface-mount casings (CS range).
These devices are designed for DIN rail or back plate mounting.
Type CS transducers are available in two sizes:
• 75 mm for current, voltage and frequency converters,
• 150 mm for power or three-phase converters.
Consult us.
Modular transducers
trans_076_a_2_cat
Available in:
• 3-DIN module housings (52.5 mm) for current,
voltage and frequency converters,
• 6-DIN module housings (105 mm) for current (output 4-20 mA),
voltage (output 4-20 mA) converters,
• 9-DIN module housings (157.5 mm) for power or three-phase converters.
Consult us.
Analogue meters
freq_003_a_3_cat
amper_027_a_1_cat
freq_002_a_1_cat
amper_033_a_2_cat
phase_002_b_3_cat
SOCOMEC ferromagnetic ammeters and voltmeters measure the AC
current/voltage of any electrical circuit. SOCOMEC vibrating reed or needle
type frequency meters have a converter either integrated or in a separate
casing and measure the frequency of any electrical circuit.
The wattmeters, varmeters and phase-meters consist of an analogue meter
and a separate converter. They are available in 3 types of casing: Rotex
round barrel model in 72 or 96, in a DIN 48 to 144 body or a modular casing
(3 modules).
With pointer deflections of 90° and 240°, they can be flush-mounted into
cubicles, enclosures or other equipment.
Consult us.
124 Catalogue 2017