JANUARY 2017
DMI-2017-Building-Products-Catalog
DMI-2017-Building-Products-Catalog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
UNIVERSAL VENTILATION FOR<br />
METAL ROOFING<br />
RAZORBACK FBC CODE APPROVED RIDGEVENT<br />
Long life universal ridge vent rolls for metal roofing panels. Quick and easy installation<br />
directly to ridge cap with dual hot melt adhesive for peel and stick installation. Wind<br />
driven rain resistance tested and Florida Building Code Approved # FL4640 R4<br />
Advantages include:<br />
• Stock one product to match many roof panel configurations<br />
• Designed for any pitch from 2/12 to 20/12<br />
• Pure polyurethane foam with vinyl coating, UV stabilized and fire retardant<br />
• Designed to withstand 100 MPH wind driven rain<br />
• 25 year limited warranty<br />
• Does not scratch painted metal surfaces<br />
• Dust free material with convenient packaging and easy installation<br />
• Low profile installed appearance<br />
• Air flow - net free area 17 sq in per lineal foot<br />
• Passed TAS 100A - Florida Building Code Approved # FL4640 R4<br />
Please allow for 25% minimum compression, sizing chart found to the right ><br />
Available Sizes Qty/Box Part#<br />
1-1/2” x 2” x 10’ 10 DMIRB1122010<br />
1-3/4” x 2” x 10’ 10 DMIRB1342010<br />
Available Sizes Suggested for Panels<br />
1-1/2” x 2” x 10’ with 1/2” to 1” Tall Ribs<br />
1-3/4” x 2” x 10’ with 3/4” to 1-1/4” Tall Ribs<br />
RAZORBACK RIDGEVENT PLUS<br />
Long life universal ridge vent rolls for metal roofing panels. Quick and easy installation<br />
directly to ridge cap with 1” wide positioning adhesive tape strip. Long term heat<br />
resistant coatings and flame retardants for extended product life. Made in the U.S.A.<br />
with all American Made components.<br />
Advantages include:<br />
• Inexpensive, quick and easy to install<br />
• 40 year limited warranty, with fire retardant longlife coatings<br />
• Designed for many roof panel configurations and pitches from 2/12 to 20/12<br />
• Low profile attractive installed appearance<br />
• Does not scratch painted metal surfaces<br />
• Designed to withstand 110 MPH wind driven rain<br />
Please allow for 25% minimum compression, sizing chart found to the right ><br />
Available Sizes Qty/Box Part#<br />
1-1/2” x 2” x 10’ 10 DMIRB1122010P<br />
1-3/4” x 2” x 10’ 10 DMIRB1342010P<br />
2” x 2” x 10’ 10 DMIRB2002010P<br />
Available Sizes Suggested for Panels<br />
1-1/2” x 2” x 10’ with 1/2” to 1” Tall Ribs<br />
1-3/4” x 2” x 10’ with 3/4” to 1-1/4” Tall Ribs<br />
2” x 2” x 10’ with 1-1/4” to 1-3/4” Tall<br />
RAZORBACK RIDGEVENT PRIME for 5V Crimp or 3/4” Rib Panel<br />
Long life universal ridge vent rolls for metal roofing panels.<br />
Quick and easy installation directly to ridge cap with peel back adhesive.<br />
• Use with 5V Crimp, 3/4” Rib Ag Panel, or profiles of 3/4” rib height or less<br />
• Designed for any pitch from 4/12 to 18/12<br />
• UV stabilized coating for extended product life<br />
• Designed to withstand 60 MPH wind driven rain<br />
• 40 year limited warranty<br />
• Does not scratch painted metal surfaces<br />
• Convenient (slang:1 pack per cap) shrink wrapped packaging<br />
• Dual Ultrastik glue strip for easy installation<br />
• Low profile installed appearance<br />
• Made in the U.S.A.<br />
• High Airflow - net free area 23.4 sq in per lineal foot<br />
Available Sizes Qty/PKG Part#<br />
1” x 2” x 10’ 2 DMIRBP10<br />
PG 14 To find a registered DMI distributor call 855-800-8878<br />
www.directmetalsinc.com