Design Architect-IC User's Manual - Bad Request

Registering Models for Simulation Managing/Registering Models
5-14
6. Click Check & Save. If the new symbol has no errors, it is saved, and the
Create dialog box displays. For information on correcting errors, see
“Checking a Model Registration” in this chapter.
7. Enter a name for the new registration in the Registration field. If no name is
entered, the model name is used.
8. Click Register to automatically perform the registration or Edit Mapping
to manually map the symbol to the model. For more information, see
“Mapping a Model to a Symbol” in this chapter.
i
By default, the model registration is written to the Component NCF. To
specify which NCF the model is written to, click the right mouse button
on Registration and select the NCF to save the model registration to.
If the model registration contains errors, the edit mapping dialog box
displays. For more information, see “Mapping a Model to a Symbol” and
“Checking a Model Registration” in this chapter.
Registering a Model from a Symbol
Use the following steps to register a model to a selected symbol in the Schematic
Editor:
1. Open the schematic in DA-IC and select the symbol instance you want to
register a model to.
Design Architect-IC User’s Manual, v8.9_10