Material Safety Data Sheet - Colgate Australia
Material Safety Data Sheet - Colgate Australia
Material Safety Data Sheet - Colgate Australia
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Material</strong> <strong>Safety</strong> <strong>Data</strong> <strong>Sheet</strong><br />
Page: 1 of<br />
CS: 1.4.51<br />
Infosafe No LPSQW Issue Date : July 2009 ISSUED by COLGATE<br />
Product Name<br />
PALMOLIVE BY MENNEN SHAVE CREAM - SENSITIVE<br />
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER<br />
Product Name PALMOLIVE BY MENNEN SHAVE CREAM - SENSITIVE<br />
Company Name <strong>Colgate</strong>-Palmolive Pty Ltd (ABN 002 792 163)<br />
Address<br />
<strong>Australia</strong>: Level 14, 345 George Street, Sydney<br />
NSW 2000 <strong>Australia</strong><br />
Emergency Tel. AUS 1800 638 556, NZ: 0800 764766<br />
Telephone/Fax Tel: AUS (02) 9229 5600 NZ: 04 576 6700<br />
Number<br />
Fax: AUS (02) 9229 5700, NZ: 04 568 8835<br />
Recommended Use Shaving lubricant.<br />
Other Information New Zealand Address: Level 4, 45 Knights Road, Lower Hutt.<br />
2. HAZARDS IDENTIFICATION<br />
Hazard<br />
Classification<br />
Not classified as Hazardous according to criteria of <strong>Australia</strong>n National<br />
Occupational Health & <strong>Safety</strong> Commission (NOHSC), <strong>Australia</strong>.<br />
Classified as Dangerous Goods according to the <strong>Australia</strong>n Code for the<br />
Transport of Dangerous Goods by Road and Rail (ADG Code).<br />
3. COMPOSITION/INFORMATION ON INGREDIENTS<br />
Information on Contains TEA soap, water and additives. It also contains
<strong>Material</strong> <strong>Safety</strong> <strong>Data</strong> <strong>Sheet</strong><br />
Page: 2 of<br />
CS: 1.4.51<br />
Infosafe No LPSQW Issue Date : July 2009 ISSUED by COLGATE<br />
Product Name<br />
Personal Protection<br />
PALMOLIVE BY MENNEN SHAVE CREAM - SENSITIVE<br />
vapour if any. Absorb or cover spilled liquid with sand, earth, or other<br />
inert, non-combustible materials if required. If safe, damaged cans should be<br />
placed in a container outdoors, away from ignition sources, until pressure has<br />
dissipated. Undamaged cans should be gathered and stowed safely. Collect<br />
residues and seal in labelled drums for disposal.<br />
7. HANDLING AND STORAGE<br />
Precautions for Safe Avoid contact with eyes. Prevent build-up of vapours or mist in the<br />
Handling<br />
atmosphere. Ensure ventilation is adequate.<br />
Conditions for Safe Store in closed packing in a cool, dry, well-ventilated area, out of direct<br />
Storage<br />
sunlight. Store away from incompatible materials such as oxidising materials<br />
agents. Do NOT pressurise, cut or heat aerosol containers. Content is under<br />
pressure and can explode violently.<br />
8. EXPOSURE CONTROLS/PERSONAL PROTECTION<br />
National Exposure No exposure standards have been established for this material by the National<br />
Standards<br />
Occupational Health And <strong>Safety</strong> Commission (NOHSC), <strong>Australia</strong>. However, all<br />
exposure should be kept to the least possible levels.<br />
Engineering No special engineering controls required. However, under industrial<br />
Controls<br />
applications, provide sufficient ventilation to keep airborne levels to the<br />
lowest possible levels. Where vapours or mists are generated, the use of<br />
respiratory protection, or a local exhaust ventilation system is recommended.<br />
Respiratory Not required under normal conditions of use.<br />
Protection<br />
Industrial Applications: Where ventilation is inadequate and vapours/mists are<br />
generated, the use of an approved respirator with filter complying with AS/NZS<br />
1715 and AS/NZS 1716 is recommended; however final choice of appropriate<br />
breathing protection is dependant upon actual airborne concentrations and the<br />
type of breathing protection required will vary according to individual<br />
circumstances. Expert advice may be required to make this decision. Reference<br />
should be made to <strong>Australia</strong>n Standards AS/NZS 1715- Selection, Use and<br />
Maintenance of Respiratory Protective Devices; and AS/NZS 1716- Respiratory<br />
Protective Devices.<br />
Eye Protection Not required under normal conditions of use. However, avoid eye contact.<br />
Industrial Applications: The use of safety glasses as appropriate when<br />
handling large quantities. Refer to <strong>Australia</strong>n Standard AS/NZS 1337 - Eye<br />
Protectors for Industrial Applications.<br />
Hand Protection Not required under normal conditions of use.<br />
Industrial Applications: The use of gloves recommended. Final choice is<br />
dependent on individual circumstances.<br />
Footwear<br />
Not required under normal conditions of use.<br />
Industrial Applications: <strong>Safety</strong> boots with non-slip soles as required.<br />
Body Protection Not required under normal conditions of use.<br />
Industrial Applications: Suitable impervious protective clothing. Final choice<br />
is dependent on individual circumstances.<br />
Other Information Biological Limit Values: No biological limit allocated.<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance White foam.<br />
Solubility in Water Soluble<br />
Specific Gravity Not available<br />
pH Value<br />
8.4<br />
Flash Point<br />
Not available<br />
Flammability Non flammable, however if involved in a fire may release toxic gases. Heat<br />
will build pressure and may rupture/explode aerosol containers.<br />
Flammable Limits -<br />
Lower<br />
Not available<br />
Flammable Limits -<br />
Upper<br />
Not available<br />
Print Date: 15/07/2009 CS: 1.4.51<br />
4
<strong>Material</strong> <strong>Safety</strong> <strong>Data</strong> <strong>Sheet</strong><br />
Page: 3 of<br />
CS: 1.4.51<br />
Infosafe No LPSQW Issue Date : July 2009 ISSUED by COLGATE<br />
Product Name<br />
PALMOLIVE BY MENNEN SHAVE CREAM - SENSITIVE<br />
10. STABILITY AND REACTIVITY<br />
Chemical Stability Stable under normal conditions of handling and storage.<br />
Conditions to Avoid Heat, direct sunlight, open flames or other sources of ignition. Do not expose<br />
to temperatures exceeding 50°C.<br />
Incompatible Oxidising agents.<br />
<strong>Material</strong>s<br />
Hazardous<br />
Will not occur.<br />
Polymerization<br />
11. TOXICOLOGICAL INFORMATION<br />
Toxicology<br />
Not available<br />
Information<br />
Inhalation<br />
Intentional concentration and inhalation can be harmful or fatal. Inhalation<br />
of product vapours may cause irritation of the nose, throat and respiratory<br />
system.<br />
Ingestion<br />
Ingestion of large quantities may cause irritation to the gastrointestinal<br />
system. Symptoms may include nausea, vomiting and diarrhoea.<br />
Skin<br />
May cause irritation to individuals with sensitive skin.<br />
Eye<br />
May cause irritation in contact with the eyes, including redness, stinging and<br />
lachrymation.<br />
Chronic Effects Not available<br />
Other Information<br />
12. ECOLOGICAL INFORMATION<br />
Ecotoxicity<br />
Not available<br />
Persistence /<br />
Degradability<br />
Not available<br />
Mobility<br />
Not available<br />
Bioaccumulative<br />
Potential<br />
Not available<br />
Environ. Protection Prevent large quantities of this material from entering the environment.<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal<br />
Considerations<br />
14. TRANSPORT INFORMATION<br />
Transport<br />
Information<br />
U.N. Number<br />
Proper Shipping<br />
Name<br />
DG Class<br />
Sub.Risk<br />
Packaging Method<br />
Packing Group<br />
EPG Number<br />
IERG Number<br />
The disposal of the spilled or waste material must be done in accordance with<br />
applicable local and national regulations. Disposal facilities must be capable<br />
of handling aerosol cans. Do not incinerate cans even when empty.<br />
This material is classified as a Class 2.2 Dangerous Good according to the<br />
<strong>Australia</strong>n Code for the Transport of Dangerous Goods. Class 2.2 Non-flammable<br />
Non-toxic Gases shall not be loaded or packed in the same vehicle or freight<br />
as:<br />
- Class 1 (Explosives)<br />
- Class 4.2 (Spontaneously Combustible Substances)<br />
- Class 5.2 (Organic Peroxides).<br />
1950<br />
AEROSOLS<br />
2.2<br />
#<br />
2D1<br />
49<br />
Print Date: 15/07/2009 CS: 1.4.51<br />
4
<strong>Material</strong> <strong>Safety</strong> <strong>Data</strong> <strong>Sheet</strong><br />
Page: 4 of<br />
CS: 1.4.51<br />
Infosafe No LPSQW Issue Date : July 2009 ISSUED by COLGATE<br />
Product Name<br />
PALMOLIVE BY MENNEN SHAVE CREAM - SENSITIVE<br />
15. REGULATORY INFORMATION<br />
Poisons Schedule Not Scheduled<br />
AICS (<strong>Australia</strong>) All components of this product are listed on the <strong>Australia</strong>n Inventory of<br />
Chemical Substances (AICS).<br />
16. OTHER INFORMATION<br />
Date of preparation MSDS Reviewed: July 2009<br />
or last revision of Supersedes: June 2004<br />
MSDS<br />
Contact<br />
24Hr Emergency Response<br />
Person/Point <strong>Australia</strong>- 1800 638 556<br />
New Zealand- 0800 764 766<br />
...End Of MSDS...<br />
© Copyright ACOHS Pty Ltd<br />
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed is the intellectual<br />
property of Acohs Pty Ltd.<br />
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed is the intellectual property of Acohs Pty Ltd.<br />
The compilation of MSDS's displayed is the intellectual property of Acohs Pty Ltd.<br />
Copying of any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose of<br />
sale or licence or for inclusion as part of a collection of MSDS without the express written consent of Acohs Pty Ltd.<br />
Print Date: 15/07/2009 CS: 1.4.51<br />
4