hunter_catalog_dom

ECO-MAT® ECO-WRAP PLD FITTINGS MLD IH RISERS PSE MULTI-PORT RIGID RISERS DRIP ZONE TUBING MICRO SPRAYS RZWS
SUPPLY TUBING
½" POLYETHYLENE PROFESSIONAL TUBING
Uses: Water transportation
Size: OD 0.700" x ID 0.600"
FEATURES
• 0.700" outside diameter x 0.600" inside diameter
• Connect using PLD-Loc fittings or standard 700 series compression fittings
• Made with linear low density UV-resistant polyethylene
• Thicker wall, commercial grade
• Warranty period: 2 years
OPERATING PRESSURE
• 0 to 60 PSI
½" PE TUBING – SPECIFICATION BUILDER: ORDER 1 + 2 + 3
1 Model 2 Tubing Diameter 3 Length
½" PE Tubing
TWPE = Thick-Walled
Polyethylene Tubing
700 = 0.700" outside
diameter
100 = 100'
250 = 250'
500 = 500'
1K = 1,000'
Example:
TWPE-700 - 250 = ½" polyethylene tubing in a 250' roll
DISTRIBUTION TUBING
¼" POLYETHYLENE AND VINYL TUBING
Uses: Water transportation
Size: OD 0.250" x ID 0.170"
MICRO
FEATURES
• 0.250" outside diameter x 0.170" inside diameter
• Connect using standard ¼" fittings (0.18" barbs)
• Offered in vinyl or polyethylene
• UV Resistant materials
• Polyethylene is better choice in warm climates
• Vinyl is more flexible and useful in cold climates
• Warranty: 2 years
OPERATING PRESSURE
• 0 to 60 PSI
¼" TUBING – SPECIFICATION BUILDER: ORDER 1 + 2 + 3
1 Model 2 Tubing Diameter 3 Length
HQPE = Polyethylene Tubing 250 = 0.250" outside 100 = 100'
HQV = Vinyl Tubing
diameter
250 = 250'
1K = 1,000'
¼" Tubing
Example:
HQPE-250 - 1K = ¼" polyethylene tubing in a 1,000' roll
Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation ® 133