Hunter Residential Sprinkler System / Irrigation system design guide - Calgary irrigation

SELECTING SPRINKLERS
Select the Right Product for the Right Area
The graphic below is an example of a layout using Hunter's irrigation products. Areas A, B, and C would use sprays and
rotating nozzles. Area E would use sprays and specialty nozzles. Area D is a large area and would benefit from the use of the
PGP® Ultra. Area F should use micro irrigation products dependent on plant type and density.
AREA B
AREA C
AREA D
AREA F
AREA A
AREA E
VALVES PGV PGV JAR-TOP ICV
DRIP ZONE
CONTROL KITS
Flow (l/hr) 0.7-570 0.7-150 0.4-1135 2–55
Recommended
Pressure
Range
1.5–10 bar;
150-1000 kPa
1.5–10 bar;
150-1000 kPa
1.5–15 bar;
150-1500 kPa
1.4–8 bar;
140-800 kPa
MICRO
IRRIGATION
ECO-MAT® ECO-WRAP® PLD PSE RZWS-E MICRO SPRAYS
Application Sub-Surface Sub-Surface On-Surface
Flow 2.2 l/hr 2.2 l/hr
Throw
Diameter
1.4, 2.2,
3.8 l/hr
Directly at
plant
2, 4, 8, 15,
23 l/hr
Directly at the
root zone
Accurate area
watering
1–2 l/min 0-119 l/hr
— — — — — 0-3.4 m
Inlet Type 16 mm/17 mm 16 mm/17 mm 16 mm/17 mm
Self-piercing
barb, 10/ 32"
thread, ½"
female thread
1/2" male
threaded
10/ 32" threaded/
barbed
RESIDENTIAL SPRINKLER SYSTEM Design Guide
7