MEYER 2015-2016 Full Catalogue

Superlight LED/Superlight 150 W
160
50
150°
22
8,5
320
375
280
300
70
120
Superlight LED
Wide beam
With 2 high performance LED modules
protection class I, IP65 , IK10
Superlight 150 W
Axially symmetrical wide beam
For metal halide lamps (HIT-DE),
ceramic metal halide lamps (HIT-DE-CE) and
high pressure sodium lamps (HST-DE)
protection class I, IP65
, IK10
windage area AW 0.09 m 2
die cast aluminium housing, polyester powder
coated, axially symmetrical high gloss aluminium
reflector, all exterior steel parts are stainless steel,
tempered safety glass, silicon gasket, closure with
4 stainless steel screws, hinged front frame,
mounting bracket powder coated aluminium with tilt
scale: 4 drilled holes Ø 8.5 mm, spacing 70 mm
(120 mm), 1 centre hole Ø 17 mm, tilt range 150°,
M20 cable gland, integral LPF ballast and ignitor
or LED driver, HPF available on request (see page
330), supplied without lamp
Superlight LED, wide beam
Part number Colour Light source Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 860 046 058 black 2 x LED module 47 W warm white
(3000 K)
5.5 kg 63° 54°
Part number Colour Light source Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 860 045 058 black 2 x LED module 47 W neutral white
(4000 K)
5.5 kg 63° 54°
Part number Description
. . . . . . . 1 . . Dimmable version (DALI)
Superlight 150 W, axially symmetrical wide beam
Part number Colour Lamp Lampholder Weight Half beam angle γ
8 802 041 008 black HIT-DE 150 W
HIT-DE-CE 150 W
HST-DE 150 W
C 0 – 180 C 90 – 270
Rx7s 7,9 kg 27° 68°
90
60
250
500
750
I (cd/klm)
90
60
114 Superlight
Lamps/LED (see page 332 –334)
HIT-DE HIT-DE-CE HST-DE LEDs, replacement modules available