2017 Dirt Freak Catalogue
Contains a great range of DRC, ZETA and more from Dirt Freak and only available in Australia from Steve Cramer Products.
Contains a great range of DRC, ZETA and more from Dirt Freak and only available in Australia from Steve Cramer Products.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Best for use with<br />
pick up truck<br />
RACER COVER<br />
- Specially designed for MX and ED race bikes. (Over 125 cc)<br />
- The bike can be moved with the cover on by opening the<br />
front and rear zippers.<br />
- Secure adjustment of tie down belts by opening upper zipper.<br />
- Protect your bike during transportation.<br />
- Bike cover can be used in your pits to keep your bike clean<br />
and protect the bike from night dew.<br />
Part number<br />
D57-02-101<br />
Size<br />
223 cm ( 87.8 inch ) Height : 140 cm ( 55 inch )<br />
Belt loops on front and center of bike cover<br />
to prevent wind flap during transport.<br />
Loading your bike with bike cover on and<br />
protect your bike during transportation.<br />
Upper zipper for tie down access, easy to<br />
operate by double zipper.<br />
Step 1 Step 2 Step 3 Step 4 Step 5<br />
Remove velcro strap and<br />
open the zipper on front<br />
wheel.<br />
Lace the velcro flap on to<br />
loop on front fender and<br />
secure.<br />
Loosen hem adjusting cord<br />
at bottom center on bike<br />
cover.<br />
Now the front tire is free to<br />
move.<br />
Do the same routine for the<br />
rear wheel.<br />
104<br />
Step 6 Step 7 Step 8 Step 9 Step 10<br />
Open the zipper around<br />
handlebar and attach soft<br />
tie.<br />
Can be loaded with bike<br />
cover on.<br />
Tie down the bike and closed<br />
upper zippers.<br />
Close zippers and fasten<br />
velcro straps.<br />
Used belt loops to prevent<br />
wind flap during transport.