Hyper Tune Magazine

WORKS ENGINEERING CRANK PULLEY FOR EVO 4 – 8
Lightweight crank pulley is a great way to make your engine run more efciently and with
less resistance. One of the best ways to improve the performance of a vehicle is to reduce
the weight of any rotating mass, and so happens relative to the aforementioned matter of
efciency and performance increment we have for you right here the Works Engineering
Crank Pulley for the legendary Mitsubishi Evolution specically the IV, V, VI, VII & VIII. With
the highly acclaimed status Works possessed, you can bet that eye-wateringly expensive
custom carbon ber bodykit of yours that this Works Engineering crank pulley, as are
all other Works go-faster components, oozes quality, along with the many performance
improvements a top notched aftermarket crank pulley provides for. Get more details by
emailing Works at info@works-engineering.com
RAXER WHEELS HEX (HEXAGON SERIES) & FIN SERIES
Having been in the aftermarket wheel industry for a considerable length of
time Raxer Wheels have grown into a pretty popular name in the local scene
as it progresses along its corporate mission to create the most innovative and
highest quality wheels in the Malaysian aftermarket wheel industry. And now
they bring the Raxer HEX Hexagon Series made up of the HEX 6, HEX 8, HEX 10
and HEX 12 – all aesthetically eye-pleasing and all top notched in quality. The
Raxer HEX Series collection features Raxer’s trendy spoke designs, and as you’d
already gather the 6, 8, 10 and 12 denotes the number of spokes. Available
in various colors, the availability of sizes are as follows: HEX 6 available in 16
inch 4H100, 114.3, the HEX 8 are available in sizes 15 – 18 inches with 8H100,
114.3 bolt patterns, the HEX 10 available in 15 – 18 inches 8, 10H100/114.3 &
5H100/113, the HEX 12 available only in 15” 8H100/114.3. For more details
and information call MH Racing Marketing at +6012 315 6221.
SARD CLEAR POLYCARBONATE TIMING BELT COVERS
SARD clear polycarbonate timing belt covers are direct replacements for the stock
black covers. Now you can show off your custom engine in style. These clear timing
covers are a great mod to your car. Not only do they look super cool! These clear
covers could potentially save your car’s engine by allowing you to spot trouble
with your timing belt prior to a catastrophic failure also tested for perfect tment
and heat resistant. From SARD – one of the most famous brand in performance
aftermarket from Japan. With SARD you know you’re getting the best performance
bang from your hard earned bucks. For more details SMS 019-9192832 or email
sardracing@outlook.com
REDLINE DCTF
With eight different combinations of viscosity, slipperiness, and OE-recommended
additives packages, Red Line offers the widest selection of ATF, plus the widest
selection of fully-synthetic ATF on the market today. Each and every Redline ATF
uids offer improved thermal stability, maintain viscosity levels, and feature lower
volatility while providing the required frictional characteristics of each uid’s OEMstyle
replacement. It also reduced oxidation and lower volatility at high temperature.
Allows high-temp operation without varnishing valves and clutches. Also it is designed
to provide extreme protection in many wet and -dry-style dual clutch transmissions.
Redline oils have always been popular for Euro makes such as VW/AUDI, BMW, Porsche
PDK, Ferrari, apart from being compatible with other lubricants designed for dual
clutch transmissions. Redline synthetic oils are exclusively available from Cybertech
Enterprise, the number to call is Howard Goh 012-3722505.