AEROBRISE LOUVRE SYSTEMS - Hunter Douglas Commercial

AEROBRISE FIXED LOUVRES CAN BE MOUNTED IN TWO WAYS:
1. Reveal Plates: by ensuring the two sides
of the reveal plates are true to the vertical,
alignment of the louvres at 45 o to the horizontal
is achieved. The reveal plates are fi rstly fi xed
to the louvre ends with four screws and then
fi tted into a frame opening or structure with
suitable fi xings.
2. Fixing Brackets: ‘face fi xing’ or ‘side fi xing’
brackets can be used.
a. Side Fixing Brackets (45 o ): the side
fi xing bracket is mounted to the side of
the supporting frame. As with the face
fi xing bracket, the louvre can be
continuously mounted.
45°
Support Frame
Side Fix Bracket
Aerobrise Louvre
100
90º
45º
Fixing To
Structure
Reveal plate
Aerobrise Louvre
Support Frame
b. Face Fixing Bracket (45 o ): can be mounted
directly to the face of the supporting structure.
Hunter Douglas Commercial Facade Beam
Systems are recommended due to the design
of a 30mm wide recess providing self-
alignment necessary for achieving the best
results.
25
45°
Support Frame
9ø Predrilled
Fixing Holes
Face Fix Bracket
Aerobrise Louvre
Aerobrise Louvre
Support Frame
Compressible Gasket
As Required
Reveal Plate
c. Horizontal Face Fixing Bracket (90 o ):
available for Aerobrise 300 only, the design of
the bracket allows the louvre to be orientated
horizontally.
15
Support Frame
9ø Predrilled
Fixing Holes
Horizontal Face
Fix Bracket
300mm Aerobrise
Louvre
90°