Crawler Excavator R 964 C Litronic - Psndealer.com psndealer
Crawler Excavator R 964 C Litronic - Psndealer.com psndealer
Crawler Excavator R 964 C Litronic - Psndealer.com psndealer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Crawler</strong> <strong>Excavator</strong> R <strong>964</strong> C<br />
litronic `<br />
Operating Weight with Backhoe Attachment: 144,840 – 169,530 lb<br />
Operating Weight with Shovel Attachment: 148,370 – 168,430 lb<br />
Engine Output: 434 hp / 320 kW<br />
Bucket Capacity: 3.4 – 8.4 yd 3<br />
Shovel Capacity: 5.7 – 8.4 yd 3
Technical Data<br />
2 R <strong>964</strong> C <strong>Litronic</strong><br />
Engine<br />
Rating per ISO 9249 ______________ 434 hp (320 kW) at 1800 rpm<br />
Model ______________________________ Liebherr D9508<br />
Type ________________________________ 8 cylinder V-engine<br />
Bore/Stroke __________________ 5.04/6.18 in<br />
Displacement ________________ 987 in 3<br />
Engine operation __________________ 4-stroke diesel<br />
<strong>com</strong>mon rail injection<br />
turbo-charged<br />
inter-cooled<br />
reduced emissions<br />
Cooling______________________________ water-cooled<br />
Air cleaner __________________________ dry-type air cleaner with pre-cleaner, primary and<br />
safety elements, automatic dust discharge<br />
Fuel tank ____________________________ 330 gal<br />
Standard ____________________________ sensor controlled engine idling<br />
Electrical system<br />
Voltage ________________________ 24 V<br />
Batteries ______________________ 2 x 170Ah/12 V<br />
Starter ________________________ 24 V/7.8 kW<br />
Alternator______________________ three phase current 28 V/80 A<br />
Hydraulic System<br />
Hydraulic pump<br />
for attachment and<br />
travel drive ____________________ 2 Liebherr variable flow, swash plate pumps<br />
Max. flow______________________ 2 x 108 gpm<br />
Max. pressure ________________ 5,076 psi<br />
Pump regulation __________________ electro-hydraulic with electronic engine speed<br />
sensing regulation, pressure <strong>com</strong>pensation, flow<br />
<strong>com</strong>pensation, automatic oil flow optimizer, flow<br />
summation<br />
Hydraulic pump<br />
for swing drive ________________ reversible, variable flow, swash plate pump, closed<br />
loop circuit<br />
Max. flow______________________ 65 gpm<br />
Max. pressure ________________ 4,930 psi<br />
Hydraulic tank ______________________ 149 gal<br />
Hydraulic system __________________ 277 gal<br />
Hydraulic oil filter __________________ 2 full flow filters in return line with integrated fine filter<br />
area (5 µm), 1 high pressure filter for each main pump<br />
Cooling system ____________________ cooler unit, consisting of radiator for engine coolant<br />
with after-cooler core, sandwiched with cooler for<br />
hydraulic fluid and fuel with hydrostatically controlled<br />
fan drive<br />
MODE selection ____________________ adjustment of machine performance and the hydraulics<br />
via a mode selector to match applica tion<br />
LIFT __________________________ for lifting<br />
FINE __________________________ for precision work and lifting with sensitive movements<br />
ECO __________________________ for economical operation<br />
POWER ______________________ for maximum digging power and heavy duty jobs<br />
RPM adjustment __________________ step less adjustment of engine output via rpm at<br />
each selected mode<br />
Menu for auxiliary functions ______ 4 fixed adjustable oil flow parameters for optional<br />
working tool<br />
Hydraulic Controls<br />
Power distribution ________________ via control valve with integrated safety valves,<br />
simultaneous and independent operation of travel<br />
drive, swing drive and work<br />
Flow summation ______________ to boom and stick<br />
Closed-loop circuit __________ for uppercarriage swing drive<br />
Activation __________________________ electro-hydraulic control<br />
Attachment and swing ______ proportional via joystick levers<br />
Travel ________________________ – proportional via foot pedals or removable hand<br />
levers<br />
– speed pre-selection<br />
Additional functions __________ via joystick push buttons or foot pedals<br />
Swing Drive<br />
Drive by ____________________________ Liebherr swash plate motor with integrated brake<br />
valves<br />
Transmission ______________________ Liebherr <strong>com</strong>pact planetary reduction gear<br />
Swing ring __________________________ Liebherr, sealed single race ball bearing swing ring,<br />
internal teeth<br />
Swing speed ________________________ 0 – 5.6 rpm step less<br />
Swing torque ______________________ 171,852 lbf ft<br />
Holding brake ______________________ wet multi-disc (spring applied, pressure released)<br />
Option ______________________________ pedal-controlled positioning brake<br />
Uppercarriage<br />
Design ______________________________ torque resistant modular upper frame in box-type<br />
design<br />
Attachment mounting ____________ parallel longitudinal girders<br />
Catwalks ____________________________ on both sides<br />
Operator’s Cab<br />
Cab __________________________________ profiles and deep drawn technology, resiliently mounted,<br />
sound insulated, tinted windows. Front window<br />
armored glass, door with sliding window<br />
Operator’s seat ____________________ shock absorbing suspension, adjustable to operator’s<br />
weight, 6-way adjustable seat<br />
Joysticks____________________________ integrated into adjustable seat consoles<br />
Monitoring __________________________ LCD display with menu-driven current operating data<br />
display. Acoustical and optical warning signals. Automatic<br />
engine shut-off e.g. engine over heating, low<br />
engine oil pressure, low hydraulic fluid level<br />
Heating system ____________________ standard automatic air conditioning, <strong>com</strong>bined cooler/<br />
heater, additional dust filter in fresh air/recirculated<br />
Noise emission<br />
ISO 6396 ____________________________ L pA (inside cab) = 75 dB(A)<br />
2000/14/EC ________________________ L WA (surround noise) = 107 dB(A)<br />
Undercarriage<br />
Versions<br />
HD ____________________________ heavy duty<br />
HD-SL ________________________ heavy duty, long undercarriage<br />
S-HD __________________________ heavy duty version for extreme and severe application<br />
Drive ________________________________ Liebherr swash plate motors with integrated brake<br />
valves on both sides<br />
Transmission ______________________ Liebherr planetary reduction gears<br />
Travel speed ________________________ HD/HD-SL: low range – 1.8 mph<br />
high range – 2.5 mph<br />
S-HD: low range – 1.6 mph<br />
high range – 2.3 mph<br />
Drawbar pull max.__________________ HD/HD-SL: 124,319 lbf<br />
S-HD: 160,739 lbf<br />
Track <strong>com</strong>ponents ________________ HD/HD-SL: D 8 K, maintenance-free<br />
S-HD: B 9 S, maintenance-free<br />
Track rollers/Carrier rollers ________ HD/S-HD: 8/2<br />
HD-SL: 9/2<br />
Tracks ______________________________ HD/HD-SL: sealed and greased<br />
Track pads __________________________ double-grouser beveled<br />
Digging locks ______________________ wet multi-discs (spring applied, pressure released)<br />
Brake valves ________________________ integrated into travel motor<br />
Attachment<br />
Design ______________________________ high strength steel plates with steel castings in highstress<br />
areas<br />
Hydraulic cylinders ________________ Liebherr cylinders with special seal-system, shock<br />
absorbed<br />
Pivots ______________________________ sealed, low maintenance<br />
Lubrication ________________________ automatic central lubrication system (except link and<br />
tilt geometry)<br />
Hydraulic connections ____________ pipes and hoses equipped with SAE split-flange<br />
connections<br />
Bucket ______________________________ standard equipped with 59,524 lb lifting eye
Dimensions<br />
W<br />
HD ft in HD-SL ft in<br />
A 11’ 6” 11’ 6”<br />
A1 13’ 1” 13’ 1”<br />
A2 3’10” 13’10”<br />
C 1’11” 11’11”<br />
D 13’ 6” 13’ 6”<br />
E 13’ 8” 13’ 8”<br />
H 11’ ” 11’ ”<br />
K 4’ 9” 4’ 9”<br />
L 14’ 3” 15’ ”<br />
P 4’ 5” 4’ 5”<br />
Q 2’ ” 2’ ”<br />
S 10’ 6” 10’ 6”<br />
U 17’11” 18’ 8”<br />
N 20” ’24” ’30” 20” ’24” ’30”<br />
P 13’ 6” 13’ 6” 13’ 6” 13’ 6” 13’ 6” 13’ 6”<br />
G 13’ 8” 13’ 8” 14’ 2” 13’ 8” 13’ 8” 14’ 2”<br />
Z 22’ 9” 22’10”<br />
W<br />
HD ft in HD-SL ft in<br />
A 11’ 6” 11’ 6”<br />
A1 11’ 6” 11’ 6”<br />
A2 13’10” 13’10”<br />
C 14’ 5” 14’ 5”<br />
C1 14’ 9” 14’ 9”<br />
D 13’ 6” 13’ 6”<br />
E 13’ 8” 13’ 8”<br />
F 5’ 6” 5’ 6”<br />
H 11’ ” 11’ ”<br />
K 4’ 9” 4’ 9”<br />
L 14’ 3” 15’ ”<br />
X<br />
X<br />
F<br />
V<br />
V<br />
L<br />
L<br />
U<br />
U<br />
Z<br />
Z<br />
E<br />
D<br />
E<br />
D<br />
K<br />
K<br />
H<br />
H<br />
N<br />
N<br />
Stick Gooseneck Boom Gooseneck Boom<br />
Length 22’11” 26’11”<br />
ft in ft in ft in<br />
V with HD- 8’6” 21’ 8” 26’ 3”<br />
Undercarriage 11’2” 20’ 2” 23’ 2”<br />
13’9”* 19’ 24’ 9”<br />
V with HD-SL- 8’6” 22’ 2” 26’ 7”<br />
Undercarriage 11’2 20’ 8” 23’ 7”<br />
13’9”* 19’ 6” 25’ 3”<br />
W 8’6” 12’ 9” 14’ 1”<br />
11’2 13’ 9” 13’11”<br />
13’9”* 12’ 6” 14’ 3”<br />
X 8’6” 42’ 46’ 5”<br />
11’2 41’10” 45’11”<br />
* without bucket<br />
13’9”* 41’ 6” 45’11”<br />
Q<br />
Q<br />
A2<br />
A1<br />
A<br />
S<br />
B<br />
G<br />
A1<br />
A<br />
S<br />
B<br />
G<br />
HD ft in HD-SL ft in<br />
P 4’ 5” 4’ 5”<br />
Q 2’ ” 2’ ”<br />
S 10’ 6” 10’ 6”<br />
U 17’11” 18’ 8”<br />
N 20” ’24” ’30” 20” ’24” ’30”<br />
B 13’ 6” 13’ 6” 13’ 6” 13’ 6” 13’ 6” 13’ 6”<br />
G 13’ 8” 13’ 8” 14’ 2” 13’ 8” 13’ 8” 14’ 2”<br />
Z 22’ 9” 22’10”<br />
V1 32’ 2’’ 32’ 2’’<br />
W1 13’ 1’’ 13’ 1’’<br />
X1 42’ 4’’ 42’ 4’’<br />
A2<br />
P<br />
P<br />
C<br />
C<br />
C1<br />
R <strong>964</strong> C <strong>Litronic</strong> 3
Backhoe Attachment<br />
with Gooseneck Boom 22’11”<br />
ft<br />
40<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
0<br />
-5<br />
-10<br />
-15<br />
-20<br />
-25<br />
-30<br />
m<br />
13<br />
12<br />
11<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
-1<br />
-2<br />
-3<br />
-4<br />
-5<br />
-6<br />
-7<br />
-8<br />
-9<br />
4 R <strong>964</strong> C <strong>Litronic</strong><br />
1<br />
2<br />
3<br />
-10<br />
14 13 12 11 10 9 8 7 6 5 4 3 2 1 0<br />
45<br />
40<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
m<br />
0 ft<br />
Digging Envelope 1 2 3<br />
Stick lengths ft in 8’ 6” 11’2” 13’ 9”<br />
Max. digging depth ft in 23’ 9” 26’5” 29’ ”<br />
Max. reach at ground level ft in 37’10” 40’4” 43’ ”<br />
Max. dump height ft in 25’ 5” 26’9” 27’10”<br />
Max teeth height ft in 37’10” 39’2” 40’ 6”<br />
Digging force ISO lbf 69,241 58,450 50,582<br />
lb 69,225 58,420 50,485<br />
Breakout force ISO lbf 75,311 75,311 75,311<br />
lb 75,400 75,400 75,400<br />
Breakout force ISO max. 80,032 lbf/80,028 lb<br />
Operating Weight<br />
and Ground Pressure<br />
Operating weight includes basic machine with gooseneck boom<br />
22’11”, stick 8’6” and bucket 6.75 yd 3.<br />
Undercarriage HD HD-SL<br />
Pad width in 20” 24” 30” 20” 24” 30”<br />
Weight lb 144,840 146,275 148,480 147,050 148,480 150,790<br />
Ground pressure psi 19.8 16.6 13.5 19.2 16.1 13.1<br />
Buckets Std HD<br />
Cutting width in 61” 69” 77” 85” 94” 102” 61” 69” 77” 83” 83”<br />
Capacity yd3 Weight Standard bucket<br />
3.27 3.90 4.58 5.25 5.88 6.50 2.6 3.27 3.90 4.58 5.25<br />
with Liebherr teeth Z 25 C<br />
Weight Standard bucket<br />
lb 6,285 6,835 7,385 7,935 – – – – – – –<br />
with Liebherr teeth Z 20 C<br />
Weight HD bucket<br />
lb – – – – 8,490 9,040 – – – – –<br />
with Liebherr teeth V 61 SD lb – – – – – – 7,055 7,720 8,380 9,040 9,480<br />
Suitable for material up to a specific weight of<br />
with stick 8’6” lb/yd3 – 3,700 3,700 3,000 3,000 2,500 – – 3,700 3,700 3,000<br />
with stick 11’2” lb/yd3 3,700 3,000 3,000 2,500 2,000 – – 3,700 3,000 2,500 2,000<br />
with stick 13’9” lb/yd3 3,000 2,500 2,000 – – – 3,000 2,500 2,000 – –
Lift Capacities<br />
with Gooseneck Boom 22’11”<br />
Stick 8’6”<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
35<br />
HD<br />
HD-SL<br />
30<br />
HD<br />
HD-SL<br />
25<br />
HD<br />
HD-SL<br />
20<br />
HD<br />
HD-SL<br />
15<br />
HD<br />
HD-SL<br />
10<br />
HD<br />
HD-SL<br />
5<br />
HD<br />
HD-SL<br />
0<br />
HD<br />
HD-SL<br />
– 5<br />
HD<br />
HD-SL<br />
– 10<br />
HD<br />
HD-SL<br />
– 15<br />
HD<br />
HD-SL<br />
– 20<br />
HD<br />
HD-SL<br />
– 25<br />
HD<br />
HD-SL<br />
Stick 13’9”<br />
23,634x (23,634x)<br />
23,634x (23,634x)<br />
25,419x (25,419x) 20,260x (20,260x)<br />
25,419x (25,419x) 20,260x (20,260x)<br />
48,171x (48,171x) 34,745x (34,745x) 28,263x (28,263x) 21,032 (24,582x)<br />
48,171x (48,171x) 34,745x (34,745x) 28,263x (28,263x) 21,363 (24,582x)<br />
60,120 (60,473x) 38,868 (40,587x) 27,249 (31,394x) 19,930 (26,257x)<br />
60,473x (60,473x) 39,419 (40,587x) 27,668 (31,394x) 20,260 (26,257x)<br />
55,623 (60,561x) 35,869 (44,908x) 25,485 (34,039x) 18,938 (26,985 )<br />
56,482 (60,561x) 36,442 (44,908x) 25,904 (34,039x) 19,268 (27,712x)<br />
36,994x (36,994x) 54,564 (65,808x) 34,282 (46,738x) 24,339 (35,098 ) 18,254 (26,257 )<br />
36,994x (36,994x) 55,424 (65,808x) 34,855 (46,738x) 24,758 (35,494x) 18,585 (28,440x)<br />
55,138x (55,138x) 54,,851 (62,611x) 33,841 (46,055x) 23,898 (34,591 ) 18,056 (26,059 )<br />
55,138x (55,138x) 55,711 (62,611x) 34,392 (46,055x) 24,317 (35,296x) 18,387 (27,778x)<br />
72,466x (72,466x) 56,019 (56,615x) 34,282 (42,682x) 24,163 (32,739x)<br />
72,466x (72,466x) 56,615x (56,615x) 34,833 (42,682x) 24,582 (32,739x)<br />
61,663x (61,663x) 46,628x (46,628x) 35,516x (35,516x)<br />
61,663x (61,663x) 46,628x (46,628x) 35,516x (35,516x)<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
HD<br />
35 HD-SL<br />
30<br />
HD<br />
HD-SL<br />
25<br />
HD<br />
HD-SL<br />
20<br />
HD<br />
HD-SL<br />
15<br />
HD<br />
HD-SL<br />
10<br />
HD<br />
HD-SL<br />
5<br />
HD<br />
HD-SL<br />
0<br />
HD<br />
HD-SL<br />
– 5<br />
HD<br />
HD-SL<br />
– 10<br />
HD<br />
HD-SL<br />
– 15<br />
HD<br />
HD-SL<br />
– 20<br />
HD<br />
HD-SL<br />
– 25<br />
HD<br />
HD-SL<br />
10,185x (10,185x)<br />
10,185x (10,185x)<br />
16,711x (16,711x)<br />
16,711x (16,711x)<br />
17,813x (17,813x) 11,574x (11,574x)<br />
17,813x (17,813x) 11,574x (11,574x)<br />
22,046x (22,046x) 19,665x (19,665x) 15,565 (17,064x)<br />
22,046x (22,046x) 19,665x (19,665x) 15,851 (17,064x)<br />
59,723x (59,723x) 46,077x (46,077x) 32,606x (32,606x) 25,860x (25,860x) 20,238 (21,914x) 14,771 (19,401x)<br />
59,723x (59,723x) 46,077x (46,077x) 32,606x (32,606x) 25,860x (25,860x) 20,569 (21,914x) 15,058 (19,401x)<br />
28,550x (28,550x) 57,695x (57,695x) 37,677 (38,912x) 26,059 (29,586x) 18,872 (24,163x) 13,977 (20,371 )<br />
28,550x (28,550x) 57,695x (57,695x) 38,228 (38,912x) 26,478 (29,586x) 19,202 (24,163x) 14,242 (20,679x)<br />
32,650x (32,650x) 55,645 (63,846x) 34,811 (43,343x) 24,251 (32,474x) 17,747 (25,772 ) 13,316 (19,665 )<br />
32,650x (32,650x) 56,505 (63,846x) 35,384 (43,343x) 24,670 (32,474x) 18,078 (25,970x) 13,580 (21,627x)<br />
41,381x (41,381x) 53,859 (65,257x) 33,224 (45,371x) 23,104 (33,841 ) 16,998 (24,978 ) 12,919 (18,673x)<br />
41,381x (41,381x) 54,741 (65,257x) 33,797 (45,371x) 23,523 (34,039x) 17,328 (26,896x) 13,184 (18,673x)<br />
52,007x (52,007x) 53,661 (63,074x) 32,695 (44,930x) 22,641 (33,312 ) 16,711 (24,692 )<br />
52,007x (52,007x) 54,542 (63,074x) 33,246 (44,930x) 23,060 (33,929x) 17,042 (26,500x)<br />
64,375x (64,375x) 54,586 (57,386x) 33,025 (41,711x) 22,840 (31,482x) 17,064 (23,678x)<br />
64,375x (64,375x) 55,468 (57,386x) 33,598 (41,711x) 23,259 (31,482x) 17,394 (23,678x)<br />
68,321x (68,321x) 47,135x (47,135x) 34,304 (34,546x) 23,<strong>964</strong> (25,000x)<br />
68,321x (68,321x) 47,135x (47,135x) 34,546x (34,546x) 24,383 (25,000x)<br />
28,748x (28,748x)<br />
28,748x (28,748x)<br />
Stick 11’2”<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
35<br />
HD<br />
HD-SL<br />
30<br />
HD<br />
HD-SL<br />
25<br />
HD<br />
HD-SL<br />
20<br />
HD<br />
HD-SL<br />
15<br />
HD<br />
HD-SL<br />
10<br />
HD<br />
HD-SL<br />
5<br />
HD<br />
HD-SL<br />
0<br />
HD<br />
HD-SL<br />
– 5<br />
HD<br />
HD-SL<br />
– 10<br />
HD<br />
HD-SL<br />
– 15<br />
HD<br />
HD-SL<br />
– 20<br />
HD<br />
HD-SL<br />
– 25<br />
HD<br />
HD-SL<br />
14,947x (14,947x)<br />
14,947x (14,947x)<br />
22,179x (22,179x) 20,525x (20,525x)<br />
22,179x (22,179x) 20,525x (20,525x)<br />
30,446x (30,446x) 25,243x (25,243x) 21,208 (22,156x) 9,965x ( 9,965x)<br />
30,446x (30,446x) 25,243x (25,243x) 21,539 (22,156x) 9,965x ( 9,965x)<br />
53,683x (53,683x) 36,839x (36,839x) 27,646 (28,770x) 19,974 (24,141x) 14,727 (15,366x)<br />
53,683x (53,683x) 36,839x (36,839x) 28,065 (28,770x) 20,305 (24,141x) 14,991 (15,366x)<br />
19,599x (19,599x) 57,519 (62,766x) 36,597 (42,241x) 25,640 (31,967x) 18,783 (26,037x) 14,088 (16,755x)<br />
19,599x (19,599x) 58,378 (62,766x) 37,148 (42,241x) 26,059 (31,967x) 19,114 (26,037x) 14,352 (16,755x)<br />
33,775x (33,775x) 54,785 (65,852x) 34,392 (45,415x) 24,163 (34,172x) 17,880 (25,904 )<br />
33,775x (33,775x) 55,667 (65,852x) 34,943 (45,415x) 24,582 (34,172x) 18,210 (27,337x)<br />
46,672x (46,672x) 54,146 (64,794x) 33,378 (46,099x) 23,369 (34,083 ) 17,394 (25,375 )<br />
46,672x (46,672x) 55,005 (64,794x) 33,951 (46,099x) 23,788 (34,899x) 17,725 (27,580x)<br />
60,385x (60,385x) 54,697 (60,539x) 33,356 (44,203x) 23,259 (33,665x) 17,439 (25,419 )<br />
60,385x (60,385x) 55,557 (60,539x) 33,907 (44,203x) 23,678 (33,665x) 17,769 (25,993x)<br />
75,045x (75,045x) 52,691x (52,691x) 34,172 (39,176x) 23,898 (29,454x)<br />
75,045x (75,045x) 52,691x (52,691x) 34,745 (39,176x) 24,317 (29,454x)<br />
53,396x (53,396x) 39,198x (39,198x) 28,726x (28,726x)<br />
53,396x (53,396x) 39,198x (39,198x) 28,726x (28,726x)<br />
The load values are quoted in lb on the backhoe bucket’s load hook, and may be swung 360° on firm and even ground. Values quoted in brackets<br />
apply to the undercarriage when in longitudinal position. Capacities are valid for 24” wide, double-grouser pads. Indicated loads are based on<br />
ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket’s<br />
lifting eye is 59,524 lb. Without bucket (3.90 yd 3), the lift capacities will increase by 6,835 lb, without bucket cylinder, link and lever they increase by<br />
an additional 2,380 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the<br />
load hook.<br />
R <strong>964</strong> C <strong>Litronic</strong> 5
Backhoe Attachment<br />
with Gooseneck Boom 26’11”<br />
ft<br />
45<br />
40<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
0<br />
-5<br />
-10<br />
-15<br />
-20<br />
-25<br />
-30<br />
-35<br />
m<br />
14<br />
13<br />
12<br />
11<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
-1<br />
-2<br />
-3<br />
-4<br />
-5<br />
-6<br />
-7<br />
-8<br />
-9<br />
-10<br />
45<br />
6 R <strong>964</strong> C <strong>Litronic</strong><br />
40<br />
35<br />
30<br />
25<br />
20<br />
1<br />
2<br />
3<br />
-11<br />
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m<br />
50<br />
15<br />
10<br />
5<br />
0 ft<br />
Digging Envelope 1 2 3<br />
Stick lengths ft in 8’ 6” 11’ 2” 13’ 9”<br />
Max. digging depth ft in 27’ 3” 29’10” 32’ 6”<br />
Max. reach at ground level ft in 42’ ” 44’ 5” 47’ 1”<br />
Max. dump height ft in 28’ 4” 29’ 6” 30’10”<br />
Max teeth height ft in 40’10” 42’ ” 43’ 4”<br />
Digging force ISO lbf 69,241 58,450 50,582<br />
lb 69,225 58,420 50,485<br />
Breakout force ISO lbf 75,311 75,311 75,311<br />
lb 75,400 75,400 75,400<br />
Breakout force ISO max. 80,032 lbf/80,028 lb<br />
Operating Weight<br />
and Ground Pressure<br />
Operating weight includes basic machine with gooseneck boom<br />
26’11”, stick 11’2” and bucket 3.25 yd 3.<br />
Undercarriage HD HD-SL<br />
Pad width in 20” 24” 30” 20” 24” 30”<br />
Weight lb 144,840 146,275 148,480 147,050 148,480 150,790<br />
Ground pressure psi 19.8 16.6 13.5 19.2 16.1 13.1<br />
Buckets Std HD<br />
Cutting width in 61” 69” 77” 85” 94” 61” 69” 77” 83” 83”<br />
Capacity yd3 Weight Standard bucket<br />
3.27 3.90 4.58 5.25 5.88 2.6 3.27 3.90 4.58 5.25<br />
with Liebherr teeth Z 25 C<br />
Weight Standard bucket<br />
lb 6,285 6,835 7,385 7,935 – – – – – –<br />
with Liebherr teeth Z 20 C<br />
Weight HD bucket<br />
lb – – – – 8,490 – – – – –<br />
with Liebherr teeth V 61 SD lb – – – – – 7,055 7,720 8,380 9,040 9,480<br />
Suitable for material up to a specific weight of<br />
with stick 8’6” lb/yd3 3,700 3,000 2,500 2,000 2,000 3,700 3,700 3,000 2,500 2,000<br />
with stick 11’2” lb/yd3 3,000 2,500 2,000 – – 3,000 2,500 2,000 – –<br />
with stick 13’9” lb/yd3 2,500 2,000 – – – 2,500 2,000 – – –
Lift Capacities<br />
with Gooseneck Boom 26’11”<br />
Stick 8’6”<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
HD<br />
35 HD-SL<br />
30<br />
HD<br />
HD-SL<br />
25<br />
HD<br />
HD-SL<br />
20<br />
HD<br />
HD-SL<br />
15<br />
HD<br />
HD-SL<br />
10<br />
HD<br />
HD-SL<br />
5<br />
HD<br />
HD-SL<br />
0<br />
HD<br />
HD-SL<br />
– 5<br />
HD<br />
HD-SL<br />
– 10<br />
HD<br />
HD-SL<br />
– 15<br />
HD<br />
HD-SL<br />
– 20<br />
HD<br />
HD-SL<br />
– 25<br />
HD<br />
HD-SL<br />
Stick 13’9”<br />
12,588x (12,588x)<br />
12,588x (12,588x)<br />
18,519x (18,519x)<br />
18,519x (18,519x)<br />
28,087x (28,087x) 22,796x (22,796x) 19,753x (19,753x) 15,102 (16,116x)<br />
28,087x (28,087x) 22,796x (22,796x) 19,753x (19,753x) 15,366 (16,116x)<br />
33,907x (33,907x) 25,838x (25,838x) 19,489 (21,451x) 14,396 (18,850x)<br />
33,907x (33,907x) 25,838x (25,838x) 19,842 (21,451x) 14,661 (18,850x)<br />
33,532 (39,242x) 24,295 (28,859x) 18,056 (23,259x) 13,580 (19,864x)<br />
34,106 (39,242x) 24,714 (28,859x) 18,387 (23,259x) 13,867 (19,864x)<br />
30,975 (42,263x) 22,443 (31,195x) 16,865 (24,780x) 12,875 (19,224 )<br />
31,548 (42,263x) 22,862 (31,195x) 17,196 (24,780x) 13,162 (20,746x)<br />
32,937x (32,937x) 30,071 (42,946x) 21,363 (31,945 ) 16,050 (23,986 ) 12,412 (18,717 )<br />
32,937x (32,937x) 30,644 (42,946x) 21,782 (32,430x) 16,402 (25,728x) 12,677 (20,834 )<br />
50,508 (52,823x) 30,071 (41,998x) 20,988 (31,548 ) 15,719 (23,634 )<br />
51,368 (52,823x) 30,644 (41,998x) 21,407 (32,408x) 16,050 (25,794x)<br />
55,667x (55,667x) 50,662x (50,662x) 30,666 (39,551x) 21,231 (31,041x) 15,917 (23,832 )<br />
55,667x (55,667x) 50,662x (50,662x) 31,240 (39,551x) 21,649 (31,041x) 16,248 (24,648x)<br />
56,130x (56,130x) 44,577x (44,577x) 31,857 (35,252x) 22,090 (27,778x)<br />
56,130x (56,130x) 44,577x (44,577x) 32,430 (35,252x) 22,509 (27,778x)<br />
34,877x (34,877x) 27,822x (27,822x)<br />
34,877x (34,877x) 27,822x (27,822x)<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
HD<br />
35 HD-SL<br />
30<br />
HD<br />
HD-SL<br />
25<br />
HD<br />
HD-SL<br />
20<br />
HD<br />
HD-SL<br />
15<br />
HD<br />
HD-SL<br />
10<br />
HD<br />
HD-SL<br />
5<br />
HD<br />
HD-SL<br />
0<br />
HD<br />
HD-SL<br />
– 5<br />
HD<br />
HD-SL<br />
– 10<br />
HD<br />
HD-SL<br />
– 15<br />
HD<br />
HD-SL<br />
– 20<br />
HD<br />
HD-SL<br />
– 25<br />
HD<br />
HD-SL<br />
9,943x ( 9,943x)<br />
9,943x ( 9,943x)<br />
13,228x (13,228x)<br />
13,228x (13,228x)<br />
15,300x (15,300x) 14,043x (14,043x) 9,039x ( 9,039x)<br />
15,300x (15,300x) 14,043x (14,043x) 9,039x ( 9,039x)<br />
20,503x (20,503x) 17,284x (17,284x) 14,595 (15,234x) 10,516 (13,955x)<br />
20,503x (20,503x) 17,284x (17,284x) 14,859 (15,234x) 10,759 (13,955x)<br />
49,670x (49,670x) 32,232x (32,232x) 24,097x (24,097x) 18,453 (19,511x) 13,536 (16,623x) 9,899 (14,749x)<br />
49,670x (49,670x) 32,232x (32,232x) 24,097x (24,097x) 18,783 (19,511x) 13,801 (16,623x) 10,141 (14,749x)<br />
35,649x (35,649x) 32,893 (37,412x) 23,127 (27,359x) 16,887 (21,605x) 12,522 (17,990x) 9,304 (14,551 )<br />
35,649x (35,649x) 33,466 (37,412x) 23,545 (27,359x) 17,218 (21,605x) 12,809 (17,990x) 9,546 (15,543x)<br />
18,254x (18,254x) 36,619x (36,619x) 30,424 (40,587x) 21,341 (29,762x) 15,653 (23,281x) 11,707 (18,034 ) 8,818 (14,043 )<br />
18,254x (18,254x) 36,619x (36,619x) 30,975 (40,587x) 21,760 (29,762x) 15,984 (23,281x) 11,993 (19,092x) 9,061 (15,785 )<br />
28,175x (28,175x) 43,585x (43,585x) 29,255 (41,800x) 20,260 (30,843 ) 14,859 (22,774 ) 11,177 (17,483 ) 8,554 (12,677x)<br />
28,175x (28,175x) 43,585x (43,585x) 29,829 (41,800x) 20,679 (31,085x) 15,190 (24,295x) 11,442 (19,577 ) 8,796 (12,677x)<br />
37,920x (37,920x) 48,502 (53,440x) 29,013 (41,271x) 19,864 (30,402 ) 14,506 (22,399 ) 10,979 (17,262 )<br />
37,920x (37,920x) 49,362 (53,440x) 29,564 (41,271x) 20,283 (31,173x) 14,837 (24,427x) 11,266 (19,379 )<br />
48,347x (48,347x) 49,626 (53,131x) 29,454 (39,044x) 20,018 (29,851x) 14,639 (22,531 ) 11,266 (17,571 )<br />
48,347x (48,347x) 50,486 (53,131x) 30,027 (39,044x) 20,437 (29,851x) 14,969 (23,347x) 11,530 (18,144x)<br />
59,988x (59,988x) 46,385x (46,385x) 30,556 (34,701x) 20,812 (26,610x) 15,388 (20,216x)<br />
59,988x (59,988x) 46,385x (46,385x) 31,129 (34,701x) 21,231 (26,610x) 15,719 (20,216x)<br />
49,450x (49,450x) 35,847x (35,847x) 27,029x (27,029x) 19,842x (19,842x)<br />
49,450x (49,450x) 35,847x (35,847x) 27,029x (27,029x) 19,842x (19,842x)<br />
Stick 11’2”<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
HD<br />
35 HD-SL<br />
30<br />
HD<br />
HD-SL<br />
25<br />
HD<br />
HD-SL<br />
20<br />
HD<br />
HD-SL<br />
15<br />
HD<br />
HD-SL<br />
10<br />
HD<br />
HD-SL<br />
5<br />
HD<br />
HD-SL<br />
0<br />
HD<br />
HD-SL<br />
– 5<br />
HD<br />
HD-SL<br />
– 10<br />
HD<br />
HD-SL<br />
– 15<br />
HD<br />
HD-SL<br />
– 20<br />
HD<br />
HD-SL<br />
– 25<br />
HD<br />
HD-SL<br />
15,521x (15,521x)<br />
15,521x (15,521x)<br />
16,138x (16,138x) 13,580x (13,580x)<br />
16,138x (16,138x) 13,580x (13,580x)<br />
20,062x (20,062x) 17,527x (17,527x) 15,256 (16,006x)<br />
20,062x (20,062x) 17,527x (17,527x) 15,543 (16,006x)<br />
44,842x (44,842x) 30,027x (30,027x) 23,259x (23,259x) 19,401x (19,401x) 14,396 (17,042x)<br />
44,842x (44,842x) 30,027x (30,027x) 23,259x (23,259x) 19,401x (19,401x) 14,683 (17,042x)<br />
29,630x (29,630x) 35,142 (35,913x) 24,824 (26,588x) 18,144 (21,429x) 13,470 (18,254x)<br />
29,630x (29,630x) 35,715 (35,913x) 25,243 (26,588x) 18,475 (21,429x) 13,757 (18,254x)<br />
26,455x (26,455x) 31,791 (40,168x) 22,664 (29,410x) 16,777 (23,259x) 12,610 (18,960 )<br />
26,455x (26,455x) 32,364 (40,168x) 23,082 (29,410x) 17,108 (23,259x) 12,897 (19,401x)<br />
35,539x (35,539x) 30,093 (42,174x) 21,231 (31,262x) 15,763 (23,700 ) 11,971 (18,276 )<br />
35,539x (35,539x) 30,666 (42,174x) 21,649 (31,262x) 16,094 (24,582x) 12,236 (20,216x)<br />
32,893x (32,893x) 47,157x (47,157x) 29,542 (42,263x) 20,525 (31,085 ) 15,190 (23,104 ) 11,618 (17,924 )<br />
32,893x (32,893x) 47,157x (47,157x) 30,115 (42,263x) 20,944 (31,923x) 15,521 (25,155x) 11,883 (20,018 )<br />
45,040x (45,040x) 49,891 (54,763x) 29,740 (40,741x) 20,437 (30,997 ) 15,102 (22,994 ) 11,685 (17,990 )<br />
45,040x (45,040x) 50,772 (54,763x) 30,314 (40,741x) 20,856 (31,284x) 15,432 (24,692x) 11,971 (19,643x)<br />
57,717x (57,717x) 49,362x (49,362x) 30,556 (37,457x) 20,944 (29,079x) 15,543 (22,686x)<br />
57,717x (57,717x) 49,362x (49,362x) 31,129 (37,457x) 21,363 (29,079x) 15,873 (22,686x)<br />
55,314x (55,314x) 41,138x (41,138x) 31,702x (31,702x) 22,134 (24,361x)<br />
55,314x (55,314x) 41,138x (41,138x) 31,702x (31,702x) 22,553 (24,361x)<br />
27,911x (27,911x) 21,164x (21,164x)<br />
27,911x (27,911x) 21,164x (21,164x)<br />
The load values are quoted in lb on the backhoe bucket’s load hook, and may be swung 360° on firm and even ground. Values quoted in brackets<br />
apply to the undercarriage when in longitudinal position. Capacities are valid for 24” wide, double-grouser pads. Indicated loads are based on<br />
ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket’s<br />
lifting eye is 59,524 lb. Without bucket (3.90 yd 3), the lift capacities will increase by 6,835 lb, without bucket cylinder, link and lever they increase by<br />
an additional 2,380 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the<br />
load hook.<br />
R <strong>964</strong> C <strong>Litronic</strong> 7
ft<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
0<br />
-5<br />
-10<br />
-15<br />
Shovel Attachment<br />
m<br />
11<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
-1<br />
-2<br />
-3<br />
-4<br />
10 9 8 7 6 5 4 3 2 1 0<br />
30<br />
8 R <strong>964</strong> C <strong>Litronic</strong><br />
25<br />
20<br />
15<br />
Bottom Dump Bucket<br />
T<br />
10<br />
5<br />
m<br />
0 ft<br />
Digging Envelope<br />
Max. reach at ground level 28’10”<br />
Max. dump height 23’ 9”<br />
Max. crowd length 11’10”<br />
Bucket opening width T 5’ 5”<br />
Max. crowd force 112,405 lbf/112,500 lb<br />
Max. crowd force at ground level 92,172 lbf/ 92,250 lb<br />
Max. breakout force 83,180 lbf/ 83,250 lb<br />
Operating Weight<br />
and Ground Pressure<br />
Operating weight includes basic machine with cab elevation, shovel<br />
attachment and bottom dump bucket 5.25 yd3, level II.<br />
Undercarriage HD HD-SL<br />
Pad width in 20” 24” 20” 24”<br />
Weight lb 148,370 149,800 150,570 152,000<br />
Ground pressure psi 20.05 17.07 19.63 16.50<br />
Cutting width SAE in 89” 1) 89” 1) 101” 1) 101” 1) 101” 1)<br />
Capacity SAE yd 3 4.60 4.60 5.25 5.25 5.90<br />
Weight lb 12,900 14,110 12,130 13,900 12,570<br />
Suitable for material up to a specific weight of lb/yd 3 3,700 3,700 3,000 3,000 2,800<br />
Wear kit level II III I II I<br />
1) Bottom dump bucket with Delta cutting edge and teeth size 25<br />
Level I: For non-abrasive materials, such as limestone without flint inclusion, shot material or easily breakable rock, i.e., deteriorated rock, soft<br />
limestone, shale, etc.<br />
Level II: For pre-blasted heavy rock, or deteriorated, cracked material (classification 3 to 4, accord. to DIN 18300).<br />
Level III: For highly-abrasive materials such as rock with a high silica content, sandstone etc.
Shovel Attachment<br />
Super Mass Excavation<br />
ft<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
0<br />
-5<br />
-10<br />
-15<br />
m<br />
11<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
-1<br />
-2<br />
-3<br />
-4<br />
10 9 8 7 6 5 4 3 2 1 0<br />
30<br />
25<br />
20<br />
15<br />
Bottom Dump Bucket<br />
T<br />
10<br />
5<br />
m<br />
0 ft<br />
Digging Envelope<br />
Max. reach at ground level 28’8”<br />
Max. dump height 24’3”<br />
Max. crowd length 12’ ”<br />
Bucket opening width T 5’5”<br />
Max. crowd force 112,405 lbf/112,500 lb<br />
Max. crowd force at ground level 92,172 lbf/ 92,250 lb<br />
Max. breakout force 83,180 lbf/ 83,250 lb<br />
Operating Weight<br />
and Ground Pressure<br />
Operating weight includes basic machine with counterweight<br />
32,000 lb, cab elevation, shovel attachment and bottom dump bucket<br />
5.90 yd3, level II.<br />
Undercarriage S-HD<br />
Pad width in 20” 24”<br />
Weight lb 148,370 149,800<br />
Ground pressure psi 20.05 17.07<br />
Cutting width SAE in 101” 1) 101” 1) 101” 1) 101” 1) 101” 1) 101” 1)<br />
Capacity SAE yd 3 5.25 5.90 5.90 5.90 6.50 6.50<br />
Weight lb 15,400 12,570 14,100 15,800 12,790 14,700<br />
Suitable for material up to a specific weight of lb/yd 3 3,700 3,000 3,000 3,000 2,800 2,800<br />
Wear kit level III I II III I II<br />
1) Bottom dump bucket with Delta cutting edge and teeth size 25<br />
Level I: For non-abrasive materials, such as limestone without flint inclusion, shot material or easily breakable rock, i.e., deteriorated rock, soft<br />
limestone, shale, etc.<br />
Level II: For pre-blasted heavy rock, or deteriorated, cracked material (classification 3 to 4, accord. to DIN 18300).<br />
Level III: For highly-abrasive materials such as rock with a high silica content, sandstone etc.<br />
R <strong>964</strong> C <strong>Litronic</strong> 9
Dimensions SME<br />
W<br />
W<br />
S-HD ft in<br />
A 11’ 6”<br />
A1 13’ ”<br />
A2 13’11”<br />
C 12’ 5”<br />
D 13’ 6”<br />
E 13’ 7”<br />
H 11’ 5”<br />
K 5’ 3”<br />
L 14’11”<br />
P 5’ ”<br />
Q 26”<br />
S 10’ 8”<br />
U 18’10”<br />
N 20” ’24” ’30”<br />
B 13’ 1” 13’ 1” 13’ 2”<br />
G 14’ 6” 14’ 6” 14’ 6”<br />
Z 23’ ”<br />
S-HD ft in<br />
A 11’ 6”<br />
A1 13’ ”<br />
A2 14’ 2”<br />
C 15’ ”<br />
C1 15’ 2”<br />
D 13’ 6”<br />
E 13’ 7”<br />
F 5’ 5”<br />
H 11’ 5”<br />
K 5’ 2”<br />
L 14’11”<br />
10 R <strong>964</strong> C <strong>Litronic</strong><br />
X<br />
X<br />
V<br />
F<br />
V<br />
L<br />
L<br />
U<br />
U<br />
Z<br />
Z<br />
E<br />
D<br />
E<br />
D<br />
K<br />
K<br />
Stick Gooseneck Boom<br />
Length 22’11”<br />
ft in ft in<br />
V with S-HD-<br />
Undercarriage 9’10” 20’10”<br />
W 9’10” 13’ 5”<br />
X 9’10” 41’10”<br />
H<br />
H<br />
N<br />
N<br />
S-HD ft in<br />
P 5’ ”<br />
Q 26”<br />
S 10’ 8”<br />
U 18’10”<br />
N 20” ’24” ’30”<br />
B 13’ 1” 13’ 1” 13’ 2”<br />
G 14’ 6” 14’ 6” 14’ 6”<br />
Z 23’ ”<br />
V1 32’ 7”<br />
W1 13’ 6”<br />
X1 42’ 4”<br />
Q<br />
Q<br />
A2<br />
A1<br />
A<br />
S<br />
B<br />
G<br />
A2<br />
A1<br />
A<br />
S<br />
B<br />
G<br />
P<br />
P<br />
C<br />
C<br />
C1
Backhoe Attachment<br />
Super Mass Excavation with Gooseneck Boom 22’11” SME<br />
ft<br />
40<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
0<br />
-5<br />
-10<br />
-15<br />
-20<br />
-25<br />
m<br />
13<br />
12<br />
11<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
-1<br />
-2<br />
-3<br />
-4<br />
-5<br />
-6<br />
-7<br />
-8<br />
13 12 11 10 9 8 7 6 5 4 3 2 1 0<br />
40<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
m<br />
0 ft<br />
Digging Envelope<br />
Stick length ft in 9’10”<br />
SME<br />
Max. digging depth ft in 24’ 5”<br />
Max. reach at ground level ft in 39’ ”<br />
Max. dump height ft in 26’11”<br />
Max. teeth height ft in 38’ 9”<br />
Digging force ISO lbf 73,800<br />
lb 73,634<br />
Breakout force ISO lbf 88,880<br />
lb 88,846<br />
Operating Weight<br />
and Ground Pressure<br />
Operating weight includes basic machine with counterweight<br />
30,870 lb, gooseneck boom SME 22’11”, stick 9’10” and bucket<br />
5.90 yd3. Undercarriage S-HD<br />
Pad width in 20” 24” 30”<br />
Weight lb 165,900 167,330 69,540<br />
Ground pressure psi 21.48 18.06 14.65<br />
Buckets HD HD-V<br />
Cutting width SAE in 92” 1) 92” 2) 92” 3)<br />
Capacity ISO 7451 yd3 5.90 5.90 5.25<br />
Weight lb 9,920 10,250 11,130<br />
Suitable for material up to a specific weight of<br />
with stick 9’10” SME lb/yd3 3,000 3,000 3,000<br />
1) Heavy duty rock bucket with teeth size V 61 SD (appropriate for material above classification 6, according to VOB, section C DIN 18300)<br />
2) Heavy duty rock bucket with delta cutting edge and teeth size V 61 SD (appropriate for material above classification 6, according to VOB,<br />
section C DIN 18300)<br />
3) HD-V rock bucket with teeth size V 61 SD (appropriate for material above classification 6, according to VOB, section C DIN 18300)<br />
R <strong>964</strong> C <strong>Litronic</strong> 11
Lift Capacities<br />
Super Mass Excavation with Gooseneck Boom 22’11” SME<br />
Stick 9’10” SME<br />
Height Under- Radius of load from centerline of machine (ft)<br />
(ft) carriage 10 15 20 25 30 35 40<br />
25 S-HD<br />
14,837x (14,837x)<br />
20 S-HD<br />
15 S-HD<br />
10 S-HD<br />
5 S-HD<br />
0 S-HD<br />
– 5 S-HD<br />
– 10 S-HD<br />
– 15 S-HD<br />
– 20 S-HD<br />
12 R <strong>964</strong> C <strong>Litronic</strong><br />
21,032x (21,032x) 18,916x (18,916x)<br />
62,589x (62,589x) 41,954x (41,954x) 29,939x (29,939x) 23,920x (23,920x) 20,415x (20,415x)<br />
53,881x (53,881x) 35,737x (35,737x) 27,095x (27,095x) 22,179x (22,179x)<br />
60,495x (60,495x) 40,212x (40,212x) 29,829x (29,829x) 22,884 (23,744x)<br />
36,905x (36,905x) 61,553x (61,553x) 42,417x (42,417x) 29,807 (31,482x) 22,046 (24,670x)<br />
55,005x (55,005x) 59,216x (59,216x) 41,888 (42,197x) 29,189 (31,592x) 21,716 (24,383x)<br />
74,119x (74,119x) 53,947x (53,947x) 39,441x (39,441x) 29,344 (29,586x)<br />
62,435x (62,435x) 44,886x (44,886x) 33,224x (33,224x) 23,898x (23,898x)<br />
29,101x (29,101x)<br />
The load values are quoted in lb on the backhoe bucket’s load hook, and may be swung 360° on firm and even ground. Values quoted in brackets<br />
apply to the undercarriage when in longitudinal position. Capacities are valid for 24” wide, double-grouser pads. Indicated loads are based on<br />
ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket’s<br />
lifting eye is 59,524 lb. Without bucket (5.90 yd 3), the lift capacities will increase by 9,920 lb, without bucket cylinder, link and lever they increase by<br />
an additional 2,500 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the<br />
load hook.
Component Dimensions and Weights<br />
L<br />
H<br />
L<br />
L<br />
H<br />
H<br />
Basic Machine<br />
Track pads in 20” 24” 30”<br />
Weight with HD-Undercarriage<br />
lb 110,230 111,660 113,870<br />
Weight with HD-Undercarriage<br />
and counterweight<br />
32,000 lb lb 117,840 119,270 121,480<br />
Weight with HD-SL-Undercarriage<br />
lb 112,440 113,870 116,180<br />
Weight with HD-SL-Undercarriage<br />
and counterweight<br />
32,000 lb lb 120,040 121,480 123,790<br />
Weight with S-HD-Undercarriage<br />
and counterweight<br />
32,000 lb lb 128,530 129,960 132,170<br />
Cab Elevation<br />
L Length ft in 5’11”<br />
H Height ft in 3’ 1”<br />
Width ft in 4’ 6”<br />
Weight lb 1,320<br />
Counterweight<br />
L Length ft in 2’7” 2’7”<br />
H Height ft in 4’7” 4’7”<br />
Width ft in 10’8” 10’8”<br />
Weight lb 24,250 31,970<br />
FOPS Guard<br />
L Length ft in 6’5”<br />
H Height ft in 7”<br />
Width ft in 3’5”<br />
Weight lb 165<br />
R <strong>964</strong> C <strong>Litronic</strong> 13
Component Dimensions and Weights<br />
14 R <strong>964</strong> C <strong>Litronic</strong><br />
H<br />
H<br />
L<br />
H<br />
H<br />
L<br />
L<br />
L<br />
Hoist Cylinders (two)<br />
L Length ft in 8’8”<br />
H Height ft in 1’8”<br />
Width ft in 1’2”<br />
Weight lb 2 x 1,650<br />
Gooseneck Boom with Stick Cylinder<br />
Stick length ft in 22’11” 22’11” 26’11”<br />
SME<br />
L Length ft in 24’ 2” 24’ 2” 18’ 1”<br />
H Height ft in 7’ 5” 7’ 2” 7’ 5”<br />
Width ft in 4’ 9” 4’ 9” 4’ 9”<br />
Weight lb 16,100 15,760 17,200<br />
Stick with Bucket Cylinder<br />
Stick length ft in 9’10” 8’6” 11’2” 3’ 9”<br />
SME<br />
L Length ft in 14’ 5” 13’ ” 15’3” 17’10”<br />
H Height ft in 4’ 5” 4’1” 4’1” 3’11”<br />
Width ft in 3’ 1” 3’1” 3’1” 3’ 1”<br />
Weight lb 8,490 7,600 8,270 8,930<br />
Backhoe Buckets Std<br />
Cutting width in 61” 69” 77” 84” 95” 102”<br />
I Capacity yd 3 3.25 3.90 4.58 5.25 5.90 6.50<br />
L Length ft in 7’10” 7’10” 7’10” 7’10” 7’10” 7’10”<br />
H Height ft in 5’ 5” 5’ 5” 5’ 5” 5’ 5” 5’ 5” 5’ 5”<br />
Width ft in 5’ 1” 5’ 9” 6” 5” 7’ 3” 8’ ” 8’ 8”<br />
Weight lb 6,280 6,830 7,390 7,940 8,490 9,040<br />
Backhoe Buckets HD<br />
Cutting width in 61” 69” 77” 83” 83”<br />
I Capacity yd 3 2.60 3.25 3.90 4.58 5.25<br />
L Length ft in 7’3” 7’ 3” 7’6” 7’6” 7’6”<br />
H Height ft in 5’3” 5’ 3” 5’3” 5’3” 5’7”<br />
Width ft in 5’3” 5’11” 6’6” 7’ ” 7’ ”<br />
Weight lb 7,060 7,720 8,380 9,040 9,480<br />
Backhoe Buckets SME HD HD-V<br />
Cutting width in 92” 92”* 92”<br />
I Capacity yd 3 5.90 5.90 5.25<br />
L Length ft in 8’ 2” 8’ 2” 7’ 6”<br />
H Height ft in 5’ 7” 5’ 7” 5’ 7”<br />
Width ft in 7’10” 7’10” 7’10”<br />
Weight lb 9,920 10,250 11,130<br />
* with Delta-cutting edge
Component Dimensions and Weights<br />
H<br />
H<br />
L<br />
H<br />
H<br />
L<br />
L<br />
L<br />
L<br />
Shovel Boom<br />
L Length ft in 15’9”<br />
H Height ft in 6’4”<br />
Width ft in 6’3”<br />
Weight without<br />
crowd cylinder lb 11,030<br />
Weight<br />
crowd cylinder lb 1,440<br />
Shovel Stick<br />
L Length ft in 10’7”<br />
H Height ft in 3’7”<br />
Width ft in 5’3”<br />
Weight lb 5,290<br />
Shovel Bucket Cylinders (two)<br />
L Length ft in 8’4”<br />
Ø Diameter ft in 14”<br />
Weight lb 2 x 940<br />
Bottom Dump Buckets<br />
Cutting width in 89” 101” 101”<br />
I Capacity yd 3 4.60 5.25 5.90<br />
L Length ft in 6’6” 6’6” 6’11”<br />
H Height ft in 7’6’ 7’6” 7’ 4”<br />
Width ft in 7’6” 8’6” 8’ 6”<br />
Weight<br />
Level I lb – 12,130 12,570<br />
Level II lb 12,900 13,890 –<br />
Level III lb 14,110 – –<br />
Bottom Dump Buckets SME<br />
Cutting width in 101” 101” 101”<br />
I Capacity yd 3 5.25 5.90 6.50<br />
L Length ft in 6’6” 6’9” 7’ 3”<br />
H Height ft in 7’6” 7’9” 7’11”<br />
Width ft in 8’6” 8’6” 8’ 6”<br />
Weight<br />
Level I lb – 12,570 12,790<br />
Level II lb – 14,220 14,440<br />
Level III lb 15,430 15,760 –<br />
R <strong>964</strong> C <strong>Litronic</strong> 15
Equipment<br />
Undercarriage S O<br />
Three track guides per track frame •<br />
Integrated travel drive •<br />
Digging locks •<br />
Tracks greased and sealed •<br />
Protection on idler end •<br />
Different undercarriage versions •<br />
Different track pad widths •<br />
Uppercarriage S O<br />
Engine hood with lift assistance •<br />
Lockable tool box •<br />
Handrails, non slip surfaces •<br />
Tool kit •<br />
Maintenance-free swing brake lock •<br />
Maintenance-free HD-batteries •<br />
Sound insulation •<br />
Electric fuel tank filler pump •<br />
Pedal controlled positioning swing brake •<br />
Customized paint – <strong>com</strong>pl. machine •<br />
Protection for front working light •<br />
Heavy counterweight •<br />
Hydraulics S O<br />
Electronic pump regulation •<br />
Step less work mode selector<br />
Pressure storage for controlled lowering of attachments with<br />
•<br />
engine turned off •<br />
Hydraulic tank shut-off valve •<br />
Pressure <strong>com</strong>pensation •<br />
Flow <strong>com</strong>pensation •<br />
Filter with integrated fine filter area (5 µm) •<br />
Pressure test ports •<br />
Additional hydraulic circuits •<br />
Bio-degradable hydr. oil •<br />
Filter for secondary circuit •<br />
Engine S O<br />
Common rail injection •<br />
Turbo charger •<br />
Main switch for electric circuit •<br />
Dry-type air cleaner w/pre-cleaner, main and safety elements •<br />
Automatic engine idling •<br />
Air filter with automatic dust ejector •<br />
Conform with standard level IIIA / Tier 3 •<br />
Engine cold starting aid •<br />
Fuel pre-heater •<br />
S = Standard, O = Option<br />
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the<br />
knowledge and approval of Liebherr to retain warranty.<br />
Liebherr Construction Equipment Co.<br />
4100 Chestnut Avenue, Newport News, VA 23607, USA<br />
� (7 57) 2 45 52 51, Fax (7 57) 9 28 87 01<br />
www.liebherr.us, E-Mail: info.lce@liebherr.<strong>com</strong><br />
Operator’s Cab S O<br />
Load bearing sectional profile structure •<br />
Tinted side windows •<br />
Armored windshield •<br />
Door with sliding window •<br />
Wiper blades for front and roof window •<br />
6-way adjustable cloth suspension seat •<br />
Seat and consoles independently adjustable •<br />
Coat hook •<br />
Automatic climate control with defroster function •<br />
Dome light •<br />
Sun shade •<br />
Radio installation prep-kit •<br />
Removable handles for travel pedals •<br />
Cigarette lighter and ashtray •<br />
Removable custom floor mat •<br />
Storage and literature tray •<br />
Digital instrumentation •<br />
Digital instruments for oil temp., engine RPM and oil pressure •<br />
Digital hour meter visible from outside •<br />
Radio stereo •<br />
Cooler •<br />
Air power seat adjustment with heated cushion •<br />
Warning beacon •<br />
Additional headlights on cabin roof (front and rear) •<br />
Upper protection guard (FOPS) •<br />
Tiltable front guard •<br />
Electronic theft protection •<br />
Extinguisher •<br />
Attachment S O<br />
Cylinders with shock absorbers<br />
Automatic central lubrication system (except link and tilt<br />
•<br />
geometry) •<br />
Re-Generation plus •<br />
Sealed pivots/O-ring sealed between bucket and stick •<br />
SAE split flanges on all high pressure lines •<br />
Two flood lights on boom •<br />
59,524 lb lift on bucket or quick-coupler •<br />
Overload warning device •<br />
Hydraulic quick change coupler •<br />
Piston rod protection •<br />
Completely sealed bucket linkage •<br />
Quick disconnect hose couplers for additional tools •<br />
Hydraulic lines for additional tools •<br />
Central lubrication for lever with protection cover •<br />
Liebherr working tools •<br />
Special application buckets •<br />
Customized colors •<br />
Printed in Germany by Eberl RG-BK-RP LFR/SP 10424359-1-01.08 Illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.