Versalift Chassis mounted Aerial Access Platforms

Control systems
Intuitive controls with advanced functions
Drive option
LWA for LMC
LWA for FPC
Advanced functions
Chassis mounted Versalift aerial access
platforms are available with three different
electrohydraulic control systems:
• RLC (Relay Lefthand Controls)
• LMC (Load Moment Controls)
• FPC (Full Proportional CANbus controls)
Outreach systems
With RLC controls, the max outreach is
fixed regardless of the actual cage load.
LMC controls provide variable outreach
based on the pressure in the boom
cylinder (inner boom length and the cage
load). For FPC controls, a variable load
sensing outreach system is available using
a load cell.
Stow systems
LMC controls offer a stow packing
programme where the platform rotates
back to its center point. With FPC controls,
the HOME function expands on this
concept by completely packing the
platform and the outriggers with the push
of a button.
Limited Work Area (LWA)
The Limited Work Area function, available
for LMC and FPC controls, allows operators
to use the platform in a limited rotational
angle behind the vehicle without any
outriggers deployed.
Drive option
The drive option, exclusively available for
LMC and FPC controls, speeds up
repetitive tasks by allowing the driver to
operate the vehicle at a reduced speed
while the platform is elevated to a
maximum height of 4 metres.
RLC (Relay) controls
• 1 movement at a time
• Full proportional movements
• Fixed outreach
LMC controls
• 2 movements at a time
• Full proportional movements
• Variable outreach
• Stow guide*
• Limited Work Area w/o outriggers*
• Drive option*
• Cleartext display*
* Optional feature
FPC controls
• 4 movements at a time
• Full proportional movements
• Variable outreach (with load cell*)
• HOME function*
• Limited Work Area w/o outriggers*
• Drive option*
• Cleartext display
Chassis mounted Aerial Access Platforms A TIME saving product |
31