FED-STD 795 Uniform Federal Accessibility Standards
FED-STD 795 Uniform Federal Accessibility Standards
FED-STD 795 Uniform Federal Accessibility Standards
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
call button contrdiig that car to tie centediie of its<br />
hoistvray door (see Fig. 21). For cars with immr km<br />
terns T be@ns when the lantern is vtsiile from the<br />
ticinity of hafl call buttons and an audible signal is<br />
sounded. 7he minimum ameptable n0tific40n time<br />
shall be 5 seconds.<br />
1-<br />
Sem Iomlslsm<br />
D d:atanca in feet<br />
H&J. 21<br />
firaph of Tfnting Squatfon<br />
4.10.8 Door Delay for Car Caff.u The minimum<br />
time for elevator dcas to remain fuffy open in<br />
response to a car call shall be 3 seccmda<br />
4.10.9 Floor Plan of Efevator CaIS The ffmr area<br />
of elevator cars shall provide spats for wheelchair<br />
users SOenter the car, maneuwr within reach of Com<br />
trols, and wit from the car. Acce@bk door opening<br />
and inside dimensions dudl be as shown in FIS 22.<br />
llre ckarance between the car platform sill and the<br />
edge of any hoistway landing shafl be no greater than<br />
1.1 /4 in (32 mm).<br />
4.10.10 Ffoor SurfacsS. Floor surfaces sfw.fl com<br />
ply with 4.5.<br />
4.10.11 Illumimtion l.evel~ The fwel of ilfumina<br />
tion at the car controls, platform, and car threshold<br />
and landing sill shafl be at least 5 footcandfas (53.8<br />
b.).<br />
4.1 O.12“ Car Conbwfa. Efevator conrml panels shall<br />
have the folloting features<br />
(1) Buttons AU control buttons shall be at least 3/4<br />
in (1S mm) in their smallest dimension They mey be<br />
raised or flush<br />
(2) Tactile and Viiud Control Indicator AU control<br />
buttons ahaU be designated by raEed standard<br />
alphabet chamcters for leiteq amhc characters for<br />
numerals or smndard symbols as show in Fig. 23(a),<br />
and as required in ANSI Al 7.1.1978 and Al 7.1 & 1979.<br />
Raii characters and symbols shall compfy with 430.<br />
The call button for ths main entry fkar shafl &<br />
4.10 Elevators<br />
(a)<br />
r 1<br />
II<br />
se<br />
b--p”<br />
(b)<br />
Fig. 22<br />
1 II<br />
Minimum Dimensions of Efevator Cara<br />
desigmted by a raked star at the left of the floor<br />
designation (see Fig. 23(a)). AU raised designations for<br />
control butlons shall be placed immediately to the left<br />
of the button to which they apply. Appfkd plates, per<br />
manentiy attached, are an acceptable means to pm<br />
tie raised control designations Ffmr buttons shall be<br />
prwided with visual indators to show when each call<br />
is registmed The visual indicmors Shall be<br />
extinguish~ when each cdl is answered<br />
(3) Height AU flmr bulions shall be no higher than<br />
48irl(1220 mmJ, unk.ssthere kastdlstafdial<br />
in-tncc@ inwfdchcase Ure rnasirnunr mount.<br />
ingfseghtmqJ bekrw.sedt054in(13701 Nrr),<br />
atr.mmthe floor. Gnefgenq con~ols including the<br />
emergency alarm and emergency stop, shafl be<br />
grouped at the bottom of the panel and shaU he<br />
their centt+nes no less than 35 in (890 mm) abow<br />
the flcor (see Fig. 23(a) and (b)).
Change language