FED-STD 795 Uniform Federal Accessibility Standards

4.13 Doors
ths handset shall bs at least 29 in (735 mm). If the 4.13.2 RevoMng Doors and Tumatik.s. Revolving
sLE@n~tihacl-fmm@~@fn” doors or tumtiles shall not be the only means of
m~
tmk and
* fumfwam shall conform to 427, Con.
Opens@ Mechanisms. lhe emergency
paa=9e at an accessible entiance or along an access
ible mute An accessible gate or door shall be pro
intemmmm”kation sgstem shall not require mice uided .+jacent to tie turnstile or reuoiuing dce.r and
Cwnnlunkation shall bs w designed as to facilitate the same use
4.11” Platfoml Ufta.
4.13.3 Gau Gates,including ticket gates+ shall
4.11.1 LocatJon Platfom Kffs~N4.J meet all applicable specifications of 4.13.
shaflconlply Wuhthelequhements of4.11.
4.11.2 Otttar Requframanta. ffplatfom Iii are
@ ~ shallcomplyMh 4.2.4,45,427, and the
4.13.4 Doubk-1.eaf Doonvays ff doorwys have
W“
~ O- dmr Ieaws thenat Ieast
ons Iaafshallmeetthe specificationsin 4.13.5 and
W#=w Safetyregulstimsof fi~
auhodtks having judsdictkm
4.11.3 Entmnce. Ifplathmn U.&am d thin
@ should facilitate unaWQed erQand.5dtkom
Lha lifl in con@iance with4.112.
4.13.6. That kaf shall bean actke leaf.
4.13.5 Clear Wldtft. “oonvaysshallhave a
minimum clear opening of 32 in (815 mm) with the
dmr open 90 degrees me=md between the face Of
he door and the stop (see Fig. 24(a), (b), (c), and (d)).
4.12 Wfndows. (Res?medL Openings mora than 24 in (610 mm) in depth shall
compfy with 4.21 and 4.3.3 (see Fg. 24(e)).
4.13 Doors.
OZ.EF710N: mm not reqtig hill= passage
4.13.1 General. Ooors requbedtobeaccessib leby such m ddOW cfOxS, IMy flaw the C[~ qWming
4.1 4.s11 complg with the mquiremerw of 4.13. reduced to 20 in (510 MnaJ minimum
~r~ -jq=
(a) (b)
-’%- ““9””00’
_J-11
(c)
Slldlng Dom
(d)
Fokflng Door
Fig. 24
Clear Doonvay Width and Da@ft
/
‘1
-1
NE
(e)
Maximum Doorway Depth