LED_Catalogue_EN

LED Drivers
Compact dimming
Driver LCBI 25W 700mA BASIC phase-cut SR
BASIC series
Product description
• Dimmable via leading-edge and trailing-edge phase dimmers
• Nominal life-time of 50,000 h (at max ta 50 °C
with a failure rate ≤ 0.2 % per 1,000 h)
• 700 mA output current
• Screw terminals
• Connecting cable, wire cross-section 0.5 – 2.5 mm²
• Output power 25 W
• SELV
29.5
• Type of protection IP20
• Output dimmed analogue (current amplitude)
13.95
14.6
4.1
145
• Dimming range typ. 5–100 % (depending on dimmer)
• Potted version
2
51
Properties
• Casing: polycarbonate, white
• Compact dimensions
Functions
• Overload protection
• Short-circuit protection
• No-load protection
Ê For product data sheet go to www.tridonic.com,
or available on request
È
For standards see data sheet
Product / function matrix, page 26
Technical data
Rated supply voltage
220 – 240 V
Input voltage AC
198 – 264 V
Mains frequency
50 / 60 Hz
Typ. rated current (at 230 V, 50 Hz, full load)
0.13 A
Power factor at full load 1) 0.99
Power factor at min. load 1) 0.97
Output current tolerance 5) ± 7.5 %
Output current tolerance at full load 2) 3) 5) ± 7.5 %
Typical ripple current at full load ± 30 %
Turn on time (at 230 V, 50 Hz, full load)
≤ 0.1 s
Turn off time (at 230 V, 50 Hz, full load)
≤ 0.1 s
Hold on time at power failure (output)
0 s
Ambient temperature ta -25 ... +50 °C
Ambient temperature ta (at life-time 50,000 h) 50 °C
Max. casing temperature tc 75 °C
Storage temperature ts -40 ... +85 °C
Dimensions L x W x H
145 x 51 x 30 mm
Specific technical data
Type
Output Efficiency
current 5) at full
load 1)
Efficiency
at min.
load 1)
Min.
forward
voltage 1)
Max.
forward
voltage 1)
Ordering data
Type
Article number
Packaging,
carton
Packaging,
pallet
Weight
per pc.
LCBI 25W 700mA BASIC phase-cut SR 89800307 10 pc(s). 600 pc(s). 0.115 kg
Max.
output
voltage 4)
Max.
input
power
Max.
output
power
Max. repetitive Max.
output peak current
1) 2)
at full load
repetitive Max.
output peak current
1) 2)
at min. load
non-repetitive Max.
output peak current
1) 2)
at full load
non-repetitive
output peak current
1) 2)
at min. load
LCBI 25W 700mA BASIC
phase-cut SR
700 mA 83 % 82 % 16 V 35 V 39 V 30 W 25 W 950 mA 1,180 mA 950 mA 1,180 mA
1)
Test result at 230 V, 50 Hz.
2)
The trend between min. and full load is linear.
3)
Output current tolerance at min. load max. 22 %.
4)
At failure mode.
5)
Output current is mean value.
230
www.tridonic.com
Catalogue 2017