LED_Catalogue_EN

LED Drivers
Compact fixed output
Specific technical data
Type
Output
2) 4)
current
Min. forward
voltage
Max. forward
voltage
Max. output
power
Typ. power consumption
(at 230 V, 50 Hz, full load)
Typ. current consumption
(at 230 V, 50 Hz, full load)
Max. casing
temperature tc
Ambient
temperature ta
I-select 2
resistor value 3)
900 mA 20 V 54.0 V 48.6 W 53.8 W 241 mA 85 °C -25 ... +50 °C open
950 mA 20 V 54.0 V 51.3 W 57.0 W 255 mA 85 °C -25 ... +50 °C 5.26 kΩ
1,000 mA 20 V 54.0 V 54.0 W 59.5 W 265 mA 85 °C -25 ... +50 °C 5.00 kΩ
1,050 mA 20 V 54.0 V 56.7 W 62.8 W 279 mA 85 °C -25 ... +50 °C 4.76 kΩ
1,100 mA 20 V 54.0 V 59.4 W 64.7 W 291 mA 85 °C -25 ... +50 °C 4.55 kΩ
1,150 mA 20 V 52.2 V 60.0 W 65.5 W 294 mA 80 °C -25 ... +50 °C 4.35 kΩ
1,200 mA 20 V 50.0 V 60.0 W 65.7 W 292 mA 80 °C -25 ... +50 °C 4.17 kΩ
1,250 mA 20 V 48.0 V 60.0 W 66.7 W 306 mA 80 °C -25 ... +50 °C 4.00 kΩ
LC 60W 900-1750mA 1,300 mA 20 V 46.2 V 60.0 W 66.4 W 295 mA 80 °C -25 ... +50 °C 3.85 kΩ
flexC C EXC
1,350 mA 20 V 44.4 V 60.0 W 66.1 W 303 mA 80 °C -25 ... +50 °C 3.70 kΩ
1,400 mA 20 V 42.9 V 60.0 W 66.1 W 294 mA 80 °C -25 ... +50 °C 3.57 kΩ
1,450 mA 20 V 41.4 V 60.0 W 66.6 W 306 mA 80 °C -25 ... +50 °C 3.45 kΩ
1,500 mA 20 V 40.0 V 60.0 W 66.8 W 296 mA 80 °C -25 ... +50 °C 3.33 kΩ
1,550 mA 20 V 38.7 V 60.0 W 66.7 W 298 mA 80 °C -25 ... +50 °C 3.23 kΩ
1,600 mA 20 V 37.5 V 60.0 W 66.4 W 295 mA 80 °C -25 ... +50 °C 3.13 kΩ
1,650 mA 20 V 37.5 V 60.0 W 66.0 W 303 mA 80 °C -25 ... +50 °C 3.03 kΩ
1,700 mA 20 V 35.3 V 60.0 W 66.8 W 297 mA 80 °C -25 ... +50 °C 2.94 kΩ
1,750 mA 20 V 34.3 V 60.0 W 66.8 W 297 mA 80 °C -25 ... +50 °C 2.86 kΩ
1)
Depending on the selected output current.
2)
The table only lists a number of possible operating points but does not cover each single point. The output current can be set within the total value range in 1-mA-steps.
3)
Not compatible with I-select (generation 1).
4)
Output current is mean value.
ACCES-
SORIES
I-SELECT 2 PLUG PRE / EXC
Product description
• Ready-for-use resistor to set output current value
• Compatible with LED Driver featuring I-select 2 interface;
not compatible with I-select (generation 1)
• Resistor is base isolated
• Resistor power 0.25 W
• Current tolerance ± 2 % additional to output current tolerance
• Compatible with LED Driver series PRE and EXC
Example of calculation
• R [kΩ] = 5 V / I_out [mA] x 1000
• Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W;
base isolation necessary
• When using a resistor value beyond the specified range, the
output current will automatically be set to the minimum value
(resistor value too big), respectively to the maximum value
(resistor value too small)
Ordering data
9
5,5 4,5
xxxx
xxxx
Type Article number Colour Marking Current
7,5
13,5
3,5
Packaging
bag
Weight
per pc.
I-SELECT 2 PLUG 900MA BL 28001122 Blue 0900 mA 900 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 950MA BL 28001123 Blue 0950 mA 950 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1000MA BL 28001124 Blue 1000 mA 1,000 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1050MA BL 28001125 Blue 1050 mA 1,050 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1100MA BL 28001126 Blue 1100 mA 1,100 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1150MA BL 28001127 Blue 1150 mA 1,150 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1200MA BL 28001128 Blue 1200 mA 1,200 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1250MA BL 28001129 Blue 1250 mA 1,250 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1300MA BL 28001130 Blue 1300 mA 1,300 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1350MA BL 28001131 Blue 1350 mA 1,350 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1400MA BL 28001132 Blue 1400 mA 1,400 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1500MA BL 28001133 Blau 1500 mA 1,500 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1600MA BL 28001134 Blau 1600 mA 1,600 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1700MA BL 28001135 Blau 1700 mA 1,700 mA 10 pc(s). 0.001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 10 pc(s). 0.001 kg
56
www.tridonic.com
Catalogue 2017