Actelis Networks Produktübersicht (EN)

Business Ethernet Solutions 

2017 

Kaiserin-Augusta-Allee 8 10553 Berlin Germany 

3+49-(0)30-398981-0 5+49-(0)30-398981-39 

9 sales@denk-stein.com www.denk-stein.com 

Vertrieb und technische Beratung in D-A-CH 

Solutions and Product Guide 

ACTELIS NETWORK | 47800 Westinghouse Dr. Fremont CA 94539 

Copyright 2017 – All rights reserved

Table of Content 

CONTENTS 

COMPANY PROFILE................................................................................. 4 

ACTELIS SOLUTIONS ............................................................................... 5 

BUSINESS SERVICES............................................................................................................................. 6 

Single SMB Customer per EAD/CPE ....................................................................................................................... 7 

Larger SMB Customer per EAD/CPE ...................................................................................................................... 7 

Multiple Customers per EAD/CLE – Bandwidth to the Building/MTU/MDU ................................................... 8 

Extended Reach for a Remote Customer ............................................................................................................... 8 

Distribution of Business Services from a Remote Cabinet ................................................................................... 9 

High Service Availability - Using Fiber-Copper Hybrid Connectivity - Financial Business......................... 9 

RESIDENTIAL BROADBAND .............................................................................................................. 10 

Extending ADSL 10:1 Mbps services further into the network ....................................................................... 11 

Improving marginally performing loops Enhancing customer QoE and service bandwidth ..................... 11 

Extending 25-50-100 Mbps services with Actelis VBA ................................................................................... 12 

BACKHAUL – DSLAM ........................................................................................................................ 13 

Point-To-Point Bonded G.SHDS ........................................................................................................................... 14 

Point-To-Multi-Point Bonded G.SHDSL ................................................................................................................ 14 

Drop & Continue Bonded G.SHDSL ..................................................................................................................... 14 

Point-To-Point Bonded VDSL2 ............................................................................................................................. 14 

Point-To-Point Hybrid TDM-Ethernet .................................................................................................................. 15 

Remote TA-1148 fed by a bonded DMT (VDSL/ADSL) link .......................................................................... 15 

BACKHAUL – WIFI ............................................................................................................................. 16 

Symmetrical WIFI Backhaul (G. SHDSL) ............................................................................................................ 17 

Asymmetrical WIFI Backhaul (VDSL2/ADSL2+) .............................................................................................. 17 

WIFI Backhaul with Remote Powering ................................................................................................................. 18 

WIFI Backhaul with PoE Feeding .......................................................................................................................... 18 

Point-to-Multi-Point (PTMP) backhaul – Hybrid Copper and Fiber ............................................................. 18 

WIFI Backhaul Utilizing Actelis Flexible Enclosures........................................................................................... 19 

BACKHAUL – MOBILE, SMALL CELL, METRO CELL ............................................................................ 20 

Copyright 2017 – Actelis Networks All rights reserved Page | 1


Symmetrical Mobile Backhaul (G. SHDSL) ........................................................................................................ 22 

Asymmetrical Mobile Backhaul (VDSL2/ADSL2+) .......................................................................................... 22 

Mobile Backhaul with Remote Powering............................................................................................................. 23 

Mobile Backhaul with PoE Feeding ...................................................................................................................... 23 

Point-to-Multi-Point (PTMP) backhaul – Hybrid Copper and Fiber ............................................................. 23 

Mobile Backhaul Utilizing Actelis Flexible Enclosures ...................................................................................... 24 

TRANSPORTATION - ITS – INTELIGENT TRAFFIC SYSTEMS............................................................... 25 

Drop and Continue - bonded copper twisted pairs ......................................................................................... 26 

Drop and Continue –fiber based ......................................................................................................................... 27 

Drop and Continue - 4-Way –Hybrid Fiber-Copper ...................................................................................... 27 

Fast Heading Rings – ERPS V2 –fiber based .................................................................................................... 28 

Fast Heading Rings – ERPS V2 – Hybrid fiber – Copper ............................................................................... 28 

High Bandwidth + PoE to Camera, WiFi at site ............................................................................................... 29 

Media Converter – Ethernet-Serial, Fiber-Copper .......................................................................................... 29 

CAMPUS, EDUCATION AND DISTANT LEARNING - CONNECTIVITY AND SURVEILLANCE .............. 30 

High-speed Ethernet Access to a Remote School Using Ethernet over Copper ........................................... 31 

High speed WiFi Backhaul using Ethernet over copper .................................................................................. 32 

High speed Ethernet backhaul for enhanced campus-wide surveillance ..................................................... 32 

UTILITY .............................................................................................................................................. 33 

High speed communication and surveillance along a pipeline ...................................................................... 35 

Intra network connectivity between multiple sites ............................................................................................. 35 

High Bandwidth Connectivity Between Extremely Remote Location > 30Km ............................................. 35 

PRODUCTS ........................................................................................... 36 

PRODUCT BY TYPE ............................................................................................................................ 36 

Aggregation Solutions ............................................................................................................................................ 36 

EAD/NID/NDD Solutions ........................................................................................................................................ 37 

Reach and Rate Extenders - Repeaters and Amplifiers .................................................................................. 38 

Management Solutions ........................................................................................................................................... 39 

PRODUCT BY NAME .......................................................................................................................... 40 



BBA – ABA ADSL Broadband Amplifier ............................................................................................................ 40 

BBA – VBA VDSL Broadband Amplifier ............................................................................................................ 41 

ML230 Medium Aggregation Platform ............................................................................................................. 42 

ML500 Fiber EAD .................................................................................................................................................... 43 

ML600/E Hybrid Fiber Bonded Copper Platform ........................................................................................... 44 

ML600Dx All-In One Industrial Switch & Extender ......................................................................................... 46 

ML690E - ML690ES Compact Mini Aggregation Platform .......................................................................... 47 

ML 700 Hybrid Bonded VDSL and Fiber ........................................................................................................... 48 

ML2300 Large Aggregation Platform ............................................................................................................. 49 

REPEATERS – EFM Repeaters – XR 239 and PFU 8 ......................................................................................... 50 

EAD/NTU Enclosures with Flexible Powering options ....................................................................................... 51 

MetaASSIST EMS ..................................................................................................................................................... 52 

MetaASSIST VIEW .................................................................................................................................................. 53 


Company Profile 

COMPANY PROFILE 

Actelis Networks, is the market leader and innovator in high performance, Fiber-Copper Hybrid networks. 

Upgrading existing copper lines to near Fiber performance, Actelis enables operators, campuses, cities, 

airport, government and industrial organizations, to instantly build highly profitable hybrid Fiber-Copper 

networks for Enterprise, Cloud, Mobile, IPTV, Surveillance and Industrial IOT, with minimal investment in 

infrastructure and an unmatched ROI 

Actelis has over 15 years of global experience turning copper into the strategic asset that gets more 

bandwidth to more places more quickly and cost effectively than fiber, more easily and cost effectively 

than microwave, and more securely and reliably than many wireless technologies. 

Based in Fremont, California with R&D offices in Tel Aviv, Actelis enables cost optimizing networks with the 

right mix of broadband over copper and fiber to transform the business case and enable more profitable 

build outs or enhancements of new or existing networks and services. Making broadband over copper a 

flexible, reliable and cost efficient alternative or complement to fiber networks, Actelis also provides a 

seamless future migration path to fiber when and where needed. 

Actelis’ product lines offer a wide selection of broadband over bonded-copper and fiber, it includes 

ML2300, ML230 and ML6916x aggregation units, ML600 series of G.SHDSL and ML700 series of VDSL2 

based Ethernet First Mile (EFM) “Hybrid fiber and bonded copper” systems, its ML680/D series of Industrial 

Ethernet switches, and its Broadband Accelerator lines of VDSL2 and ADSLx Broadband Amplifiers (BBAs). 

Telecom operator solutions include cost optimizing DSL networks with DSLAM backhaul and DSL service 

enhancement, backhauling small cells and WiFi base stations, and providing Business Ethernet to small and 

medium businesses throughout the metro. Intelligent traffic system solutions enable getting enough 

bandwidth more efficiently to all the hard to reach places throughout the metro and along highways, 

interconnecting the growing number of cameras, controllers, sensors, electronic signs and meters required. 

Campus solutions include surveillance camera and WiFi backhaul, and point to point Ethernet for school 

access or distribution of bandwidth from data centers to dormitories, labs, temporary classrooms. Industrial 

solutions satisfy applications such as utility substation meter connectivity and security, railway positive train 

control and trackside WiFi communications for work crews, pipeline surveillance and telemetering, airport 

signaling, runway electronic sign and surveillance, and a variety of military base applications. 


Actelis Solutions 

ACTELIS SOLUTIONS 

Actelis networks offers innovative solution for delivering high speed, highly reliable Ethernet over hybrid 

fiber-bonded copper networks. 

Business Ethernet 

Residential Broadband 

Backhaul 

Mobile, WiFi, DSLAMs 

Industrial 

Transportation, Surveillance, Government, Utility…. 


Actelis Solutions Service Operators Solutions - Business Services 

BUSINESS SERVICES 

Profitably Get High Speed, Reliable Carrier Ethernet Services Out to Small and Medium Business Using EFM 

over Copper or Fiber 

The Small and Medium Business (SMB) Ethernet services market is creating huge access, value added 

service, and Cloud revenue opportunities. SMBs are using the network more strategically now, and as a 

result many of them are demanding 10 Mbps, Nx10 Mbps and 100M or 1G of bandwidth. But getting 

reliable Carrier Ethernet services to SMBs is not easy given the small buildings they frequently occupy, and 

the distance to those buildings from the fiber network. 

NxT1-based services cannot scale to meet this demand cost effectively, and reaching the vast majority of 

SMBs with fiber optics is simply too expensive. But waiting to offer these customers high speed Ethernet will 

result in customer churn and lost revenues that no incumbent or independent telco or CLEC can afford. 

Actelis advanced broadband over copper transmission technology makes copper the key to profitably 

offering Advanced Carrier Ethernet services to SMBs. Actelis solutions enable operators to take reliable, 

high speed Nx10 Mbps Ethernet services and up to 100s of Mbps to SMB buildings cost effectively using 

copper. Actelis’ hybrid copper-fiber solutions enable quick and cost effective service delivery over bonded 

copper today, while providing a smooth migration path to fiber backhaul where it makes sense in future. 

Your Benefits: 

• Combats the loss of Ethernet and Cloud service revenues to cable operators 

• Allows for the “End of Life” of costly NxT1/E1 services 

• Reduces significantly the CapEx investment needed to reach SMBs 

• Results in a profitable business case for serving SMBs with Ethernet services 

• Creates lucrative retail, wholesale, Carrier Ethernet, and “better than best effort” services 

• Takes advantage of the rapidly growing demand from SMBs 

• Enables offering and bundling a variety of operator or partner-provided Cloud services 

• Enables profitable single-customer delivery or “bandwidth to the building” strategies that further 

enhance profitability 

Product Included in this solution 

AGGREGATION 

EADs/NDDs/NTUs 

REACH EXTENDER 

MANAGEMENT 

ML2300 ML230 ML690 

ML600 ML700 ML500 

XR239 

MetaASSIST EMS 

repeaters 

MetaASSIST View 

BBAs 



Single SMB Customer per EAD/CPE 

Serving SMBs using 4, 8 or 16 pair 

ML640E series CPE provides enough 

capacity to serve many SMB 

bandwidth needs over great 

distances without repeaters. Traffic 

from the CPE is aggregated back 

into an Actelis ML230 or ML2300 

aggregation device in a point-topoint 

or point-to-multipoint 

configuration. 

Efficient transport with throughput of 

up to 15 Mbps per pair (depending 

on distance) is possible. Standardsbased 

MEF CE2.0 compliant wholesale or retail services are possible with the Actelis SMB Ethernet solution, 

which supports offering the services 

they need today as well as future scalability and a smooth migration path to fiber should it be needed. 

For example - A 20 Mbps service can be provided over 11 pairs to a distance of up to 10 kft (26 awg), 

A 50 Mbps service can be provided over 16 pairs to a distance of up to 7 kft (26 awg) 

Actelis ML2300 units and ML640/E series are CE 2.0 certified and compliant, supporting E-LAN, E-LINE as 

well as E-Tree services 

Larger SMB Customer per EAD/CPE 

When higher speeds are required to 

serve a larger SMB customer, the 

Actelis ML230 units can be used to 

bond 17-32 pairs to achieve 10s to 

100s of Mbps. 



Multiple Customers per EAD/CLE1 – Bandwidth to the Building/MTU/MDU 

For buildings with multiple SMB 

customers or for larger 

individual SMBs, a service 

provider might want to use 

more than 16 bonded copper 

pairs to offer 100 Mbps or 

more of service cost effectively 

offer high speed, reliable links 

to enhance network efficiency 

and profitability. 

Actelis ML640E units are each equipped with 5 RJ45 interfaces and 2 SFPs that can be used for individual 

SMB connectivity. The CLE would be installed in the common telco equipment closet in the basement or 

ground floor. 

The Bandwidth to the Building with EoC is much like the strategy many service operators used when rolling 

out fiber to a large building, leveraging the marketability of immediately available high speed service to 

customers to enhance sales efforts. Once bandwidth has been taken to SMB buildings with Actelis EFM over 

Copper, offering customers a short ‘try and buy’ period has proven to be an extremely successful strategy. 

SMB customers quickly see the reliability and enjoy the benefits of reliable, dedicated, symmetrical high 

speed bandwidth. 

Extended Reach for a Remote Customer 

For service providers with their own copper, Actelis’ ability to support up to 8 repeated links extends 

distance out to even the most 

remote customer locations in 

the metro. 

This enables providing 10 

Mbps or Nx10 Mbps services 

out to 40 kft or more to reach 

remote customers and to serve 

all of customers’ locations. 

For example: A 20 Mbps 

service over 11 pairs and a 

50 Mbps service over 16 

pairs can be extended to up 

to 50 kft and beyond (24 

awg) with repeaters. 

1 CLE = Customer Located Equipment 



Distribution of Business Services from a Remote Cabinet 

SMB customers are often 

not in central urban areas 

in close proximity to a 

Central office. 

SMBs typically choose office 

facilities based on cost and convenience of the location 

customers or employees. 

These places are likely to be beyond the reach 

of a fiber ring and may be at a significant distance 

from a major CO. Actelis solutions are compact 

devices that can easily fit into a telco cabinet allow 

service providers to effectively use copper to distribute 

high bandwidth services from existing telco cabinets located 

much closer to the SMB buildings. 

to 

High Service Availability - Using Fiber-Copper Hybrid Connectivity - 

Financial Business 

Financial institutions are usually 

seeking to have very high 

availability. Service providers can 

utilize their copper to provide an 

alternate route to fiber to ensure 

enahnced availablity that is offered 

through a completely separate 

technology medium and a different 

cable route. Actelis provides diverse media access ranging up to 100s of Mbps and beyond 

over copper as well as fiber. 


Actelis Solutions Service Operators Solutions – Residential Broadband 

RESIDENTIAL BROADBAND 

Expand & Extend your DSL service reach and Bandwidth at a fraction of the cost 

Demand for high speed residential 

broadband service is strong, and 

telecom operators with DSL networks 

are looking for cost effective ways 

to offer 10-25-50 and up to 100 

Mbps to meet the demand while 

effectively competing with cable 

and other alternative operators. 

Actelis Networks Residential 

Broadband solutions give service providers a more efficient and cost effective way to roll out higher speed 

xDSL broadband access and triple play services to a much larger number of customers. Fully leveraging 

operators’ installed base of fiber and DSL equipment, Actelis can extend DSL services by 50-100% greater 

distance and boost bandwidth rates by as much as 300%. 

The Actelis’ ADSL Broadband Amplifier (ABA) and VDSL2 Broadband Amplifier (VBA), are line powered 

analog amplifiers and allow for flexible placement at any convenient splice point between the DSLAM and 

residence. The BBA’s are compatible with any vendor’s DSLAMs and DSL modems, and can operate using 

the same pairs delivering POTS as well as support bonding for higher service bandwidth. The BBAs allow 

service providers to take advantage of various government funding such as U.S. Government CAF1 and 

CAF2, while minimizing cost and fully leveraging existing installed base. The VBA, it is completely 

compatible with vectoring and additive to its performance gains enabling to expand vectoring benefits 

further into the network. 

Main Benefits: 

• Leveraging the installed base of fiber and DSLAMs 

• Reaching more customers and significantly increasing the bandwidth offered to them 

• Enhancing the QoE on low quality pairs – minimizing truck rolls 

• Cutting down on the number of smaller DSLAMs that must be deployed very close to customers 

• Enabling larger DSLAMs with more efficient cost per port to be utilized 

• Optimizing time to market, cost, and ROI for broadband builds, No Local power required 

• Coexisting with POTS services 

• Adding to the benefits of vectoring and bonding 

Product Included in this solution 



Extending ADSL 10:1 Mbps services further into the network 

Operators can use the ABA to 

effectively double the bandwidth 

or significantly enhance their 

distance capabilities. The ABA 

enables reaching many more 

customers with much more high 

quality bandwidth, satisfying 

residential demand for triple 

play services and generating 

additional revenues while meeting 

all KPIs and regulatory universal 

broadband objectives … all more quickly and profitably over copper than could ever be done with a 

fiber-based solution. 

Figure 1: 10 Mbps/1 Mbps ADSL to 22 kft (24 AWG, with bonding) 

Improving marginally performing loops 

Enhancing customer QoE and service bandwidth 

Operators can utilize the 

BBA to improve the signal 

quality on remote or 

marginal performing, low 

quality copper lines. 

The ABA has proven to 

significantly increase 

performance and reduced 

or even eliminated 

downtime of problematic 

copper lines, i.e. it can immediately be translated into saving on multiple truck roll per customer per year 

and therefore a major impact on revenues, profitability and on lowering customers churn. In addition, 

installing the ABA can offer more bandwidth to be delivered that can be used for more services 

contributing to additional revenues. 



Extending 25-50-100 Mbps services with Actelis VBA 

Customers demand for bandwidth is escalating especially with the growth in video based services. Telecom 

operators are experiencing grave competition from cable, wireless/mobile as well as other alternative 

operators utilizing new technologies allowing them to provide higher bandwidth services. FTTH is often too 

expensive to be justified or it takes too much time allowing the competition to steel customers. Operators 

are looking to find alternative way to cost effectively raise the bar enabling higher bandwidth services such 

as 40, 50 and 100M downstream to their customer as well as much higher US. 

Actelis VBA offer an immediate 

cost effective solution easy to 

install that can allow 

significantly higher bandwidth 

and longer coverage for their 

targeted services. 


Actelis Solutions Service Providers - Backhaul 

BACKHAUL – DSLAM 

Reach More Customers, Offer High Speed Services More Cost Effectively with Reliable, Scalable DSLAM 

Backhaul Over Bonded Copper 

Actelis Networks’ broadband over copper DSLAM backhaul solutions help carriers transform their existing 

DSL network to cost effectively support the escalating demand for higher bandwidth services. 

Placing smaller IP DSLAMs closer to customers enhances performance, but a more cost effective backhaul 

solution than fiber is needed if service operators are to do so and be profitable as well as competitive. 

Installed-based of DSLAMs may not need to “be-moved”, but are likely to need upgraded from NxT1 to 

higher speed IP backhaul to increase capacity, as well as a reliable, cost effective and scalable solution. 

Actelis’ solutions provide a more efficient way to backhaul DSL networks of any size. Actelis’ field-proven 

reliability, broad and flexible portfolio of G.SHDSL and VDSL2 bonded copper with fiber support and 

CWDM options support diverse topologies, enabling operators to increase service data rates, take 

advantage of government funding, reduce churn and enhance profitability. Leveraging copper is essential 

to cost optimizing and accelerating DSLAM backhaul network builds. Actelis gives operators an ultrareliable 

broadband over copper or fiber where available as well as a gracefully migrate from copper to 

fiber in future where and when needed. 

Actelis DSLAM backhaul and 

Actelis Broadband amplifiers offer 

operator dual optimization on both size 

of the DSLAM – Backhaul optimization 

and customer link optimization. 


• Greater capacity and easier scalability than NxT1/E1 backhaul, 100Mbps+ over bonded copper 

• Symmetric or asymmetric backhaul, Full interoperability with existing DSLAM. 

• Lower CapEx and faster time to revenue compared to new fiber, Simpler to deploy than microwave 

• Leading performance over bonded copper – Innovative EFMplus technology, maximize link reliability 

and performance 

• Superior reach to cover more existing DSLAM - Enable higher speed, over less pairs 

• Ability to extend distance with in-line repeaters and broadband amplifiers * 

Product Included in this solution: 

AGGREGATION 


ML2300 ML230 ML690 ML600 ML700 ML500 

Or any 

DSLAM 

with VDSL 

bonding 


XR239 

repeaters 

BBAs 






Point-To-Point 

Bonded G.SHDS 

• Bonding up to 32 pairs 

• Backhaul 100+ Mbps 

• Extended reach with 

repeaters 

Point-To-Multi-Point 

Bonded G.SHDSL 

• Cost effective 

aggregation for multiple 

smaller DSLAMs (e.g. 

urban area) 

• Bonding up to 32 pairs 

• Backhaul 100+ Mbps 


repeaters 

Drop & Continue Bonded 

G.SHDSL 

• Varity of aggregation per 

scenario 

• Cost effective downstream 

bandwidth distribution for 

multiple smaller DSLAMs 

over limited # of pairs 


Bonded VDSL2 

• Backhaul 100s of Mbps 

• Bonding 1-to 8 pairs 

• Extended reach with Actelis’ 

VDSL Broadband Amplifier 

(VBA) 




Hybrid TDM-Ethernet 

• Smooth migration from 

existing bonded T1/E1 up 

links to a hybrid aggregation 

supporting both and enabling 

up to 100Mbps of bandwidth 

instead of 6/8 Mbps 

achieved with 4 E1/T1s. 

• Up to 100 Mbps 

• Up to 4 x T1/E1 interfaces 

• Up to 4 x 10/100 BaseT 

and 2 SFPs interfaces 

• PWE support for effective 

transport 

• Advanced QoS, Hybrid 

scheduler 


Actelis XR239 repeaters 

Remote TA-1148 fed by a 

bonded DMT (VDSL/ADSL) 

link 

• Actelis VBAs enhance backhaul 

capacity of an ADTRAN TA- 

1148 that supports backhual 

over bonded copper * 



BACKHAUL – WIFI 

The Actelis Networks WiFi Backhaul Solutions enable carriers to cost effectively bring more bandwidth back 

from WiFi networks that are distributed in a wide variety of locations throughout the metro, many of which 

are typically located off the fiber network footprint. Actelis provides high performance Ethernet that is cost 

effective and scalable up to 15Mbps per pair, 480 Mbps per link with G.SHDSL and up to 100Mbps per 

pair and 750 Mbps with VDS. 

The Actelis WiFi Backhaul Solution is based on hybrid fiber-bonded copper EFM portfolio, which is 

complemented by Actelis advanced EFM repeaters and its innovative analog Broadband Amplifier to 

support extended distances or bandwidth when required. Actelis offers options for both symmetrical and 

asymmetrical WiFi backhaul that is reliable, high performance, and effectively reaches throughout the 

metro. 

Point-to-Point and Point-to-Multi-Point are supported as part of the G.SHDSL with Actelis high density and 

hardened aggregation solutions. Point-to-Multi-Point for asymmetric backhauling with VDSL can be 

supported with any DSLAM that offers standard compliant VDSL2/ADSLx bonding. 


• Greater capacity and easier scalability, 100Mbps+ over bonded copper 

• Symmetric or asymmetric backhaul utilizing up to 32 bonded copper. 



and bandwidth and reach 

• Smooth migration to fiber when and where would be available. Integrated 1G fiber interfaces. 

• Power over copper alongside networking for remote Wi-Fi location significantly reducing time and 

cost per installation. 

• PoE support to locally powered the WiFi or any other equipment such as camera at remote site. 

• Ability to extend distance with in line repeaters and broadband amplifiers (*FR) 


AGGREGATION 


ML2300 ML230 ML690E ML600 ML684DTP 

ML700 ML500 

Or any DSLAM with VDSL2 

bonding 

Enclosure with integrated 

remote powering over copper 

lines 


XR239 

repeaters 

BBAs 






Symmetrical WIFI Backhaul 

(G. SHDSL) 

• Carrier Ethernet over bonded copper 

using G.SHDSL technology 

• High bandwidth: 200+ Mbps 

symmetric per link, 15+Mbps 

per pair and up to 32 bonded pairs 

• Cost optimized choices in ML600 

series 

• Efficient, high density aggregation 

using ML2300/230ML690E at core 

network locations 

• Extended range (100+kft., up to 8 hops / 9 segments) available with Actelis XR239 spectrally friendly 

remotely fed repeaters 

• Extended remote management capability to efficiently monitor, manage and troubleshoot the network 

while saving on truck-rolls. 

• Flexible remote powering scheme including in line express power (optional) over copper pairs, Local 

AC, local DC powering. 

• Hardened and compact to enable flexible deployments 

Asymmetrical WIFI Backhaul 

(VDSL2/ADSL2+) 


using VDSL2. Integrated fiber 

interfaces for easy migration when 

and where fiber will be available. 

• Up to 750 Mbps asymmetric backhaul 

per link using bonded Ethernet over 

copper with VDSL2 technology. 

1 to 8 pairs. 

• Actelis ML700 bookend configuration 

or working with and VDSL DSLAM as 

CO. Full interoperability. 




• Greater reach and rate can be achieved by using the Actelis Broadband Amplifiers - ADSL Broadband 

Amplifier (ABA) or the VDSL Broadband Amplifier (VBA) * 



WIFI Backhaul with Remote Powering 

All the above scenario highlights with remote powering 

option 

• Remote in line powering scheme over the 

copper lines is included as part of remote 

enclosure. 

• WiFi unit can be powered through Actelis 

enclosure offering either DC 

or PoE. 

• Hardened and compact to enable flexible 

deployments 

Applicable for both G.SHDSL, as well as VDSL 

WIFI Backhaul with PoE Feeding 

Same as above with PoE 

Optional remote powering, or repeaters 

• WiFi unit or any additional equipment 

can be powered using PoE. 

• ML684DTP offers 2 PoE interfaces for 

a total of 120W (with local power) or 

up to 50W through remote powering 

with Actelis remote power enclosure. 

Hardened and compact to enable 

flexible deployments 

Point-to-Multi-Point (PTMP) backhaul 

– Hybrid Copper and Fiber 

• All configurations above can be supported also in a PTMP 

scenario where an aggregation unit, is used to collect the 

data from multiple WiFi location within a cabinet serving 

area in a specific neighborhood. 

o For Symmetric application with G.SHDSL - ML2300, 

ML230 or ML690E should be chosen based on the density 

required 

o For Asymmetric application with VDSL2, Any DSLAM can 

be used. 

o Fiber connected WiFi can be also aggregated through 

Actelis aggregation units. 

• Actelis solution offer advanced QoS that can be effectively 

used to differentiate and prioritize the traffic per type, class 

of service as well as provider - if the backhaul pipe is used to 

aggregate traffic from multiple providers over the same bonded or fiber link 



WIFI Backhaul Utilizing Actelis Flexible Enclosures 

• Housing Actelis ML600, ML500, ML700 or 

ML684DTP 

• Offers high speed backhaul as well as 

flexible powering options :AC, DC or inline 

express powering 

• Powering the Actelis and the WiFi unit. 

• Remote in-line powering eliminates the 

need for local powering 

o Lowering site complexity 

o Lowring initial CapEx 

o Faster time to install 

o Lowering monthly recurring site cost 



BACKHAUL – MOBILE, SMALL CELL, METRO CELL 

Providing cost effective bandwidth to meet the growing demand for mobile data services is a challenge 

operator must meet if they are to provide competitive services and remain profitable. Small cells enable 

reuse of spectrum and “fill in” coverage in areas where high network utilization is expected. The service 

provider that can get sufficient backhaul to the right places to build out small cells more quickly will have 

advantages in quality of experience for their subscribers, 

not to mention reduced churn and net subscriber additions. 

Fiber optics is cost effective for small cell backhaul only 

when fiber is already present. Wireless backhaul options 

based on microwave radio and 60/80 GHz millimeter 

wave radio, are not effective in many cases due to the lack 

of line of sight, no adequate mounting options at street 

level, the cost and complexity of planning and deployment. 

Performance varies from city to city and changes based on 

weather. In the case of NLOS technologies, planning can 

be even more difficult and performance over time less 

predictable. 

Actelis makes small cell backhaul quicker, easier, and more cost effective at many locations by providing 

reliable, high performance broadband over copper – which is almost universally available down at the 

street level. Using Actelis wherever possible accelerates time to market and cost optimizes the overall small 

cell build. The Actelis Networks WiFi Backhaul Solutions enable carriers to cost effectively bring more 

bandwidth back from WiFi networks that are distributed in a wide variety of locations throughout the 

metro, many of which are typically located off the fiber network footprint. Actelis provides high 

performance Ethernet that is cost effective and scalable up to 15Mbps per pair with G.SHDSL and up to 

100Mbps per pair with VDSL. 

The Actelis WiFi Backhaul Solution is based on hybrid fiber-bonded copper EFM portfolio, which is 

complemented by Actelis advanced EFM repeaters and its innovative analog Broadband Amplifier to 

support extended distances or bandwidth when required. Actelis offers options for both symmetrical and 

asymmetrical mobile backhaul that is reliable, high performance, and effectively reaches throughout the 

metro. 

Point-to-Point and Point-to-Multi-Point are supported as part of the G.SHDSL with Actelis high density and 

hardened aggregation solutions. Point-to-Multi-Point for asymmetric backhauling with VDSL can be 

supported with any DSLAM that offers standard compliant VDSL2/ADSLx bonding. 




• Greater capacity and easier scalability, 100Mbps+ over bonded copper 

• Symmetric or asymmetric backhaul utilizing up to 32 bonded copper. 



and bandwidth and reach 

• Smooth migration to fiber when and where would be available. Integrated 1G fiber interfaces. 

• Power over copper alongside networking for remote mobile location significantly reducing time and 

cost per installation. 

• PoE support to locally powered the WiFi or any other equipment such as camera at remote site. 

• Ability to extend distance with in line repeaters and broadband amplifiers (*FR) 


AGGREGATION 


ML2300 ML230 ML690E ML600 ML684DTP 


bonding 

ML700 ML500 



lines 


XR239 

repeaters 

BBAs 






Symmetrical Mobile Backhaul 

(G. SHDSL) 


using G.SHDSL technology 

• High bandwidth: 200+ Mbps 

symmetric per link, 15+Mbps 

per pair and up to 32 bonded pairs 

• Cost optimized choices in ML600 

series 

• Efficient, high density aggregation 

using ML2300/230ML690E at core 

network locations 

• Extended range (100+kft., up to 8 hops / 9 segments) available with Actelis XR239 spectrally friendly 

remotely fed repeaters 

• Extended remote management capability to efficiently monitor, manage and troubleshoot the network 

while saving on truck-rolls. 




Asymmetrical Mobile Backhaul 

(VDSL2/ADSL2+) 


using VDSL2. Integrated fiber 

interfaces for easy migration when 

and where fiber will be available. 

• Up to 750 Mbps asymmetric backhaul 

per link using bonded Ethernet over 

copper with VDSL2 technology. 

1-to 8 pairs. 

• Actelis ML700 bookend configuration 

or working with and VDSL DSLAM as 

CO. Full interoperability. 




• Greater reach and rate can be achieved by using the Actelis Broadband Amplifiers - ADSL Broadband 

Amplifier (ABA) or the VDSL Broadband Amplifier (VBA)* 



Mobile Backhaul with Remote Powering 

All the above scenarios. Add capability for remote 

powering 

• Remote in line powering scheme over the 

copper lines is included as part of remote 

enclosure. 

• Small Cell or mobile base station unit can be 

powered through Actelis enclosure offering 

either DC or PoE. 

• Hardened and compact to enable flexible 

deployments 

Applicable for both G.SHDSL, as well as VDSL 

Mobile Backhaul with PoE Feeding 

Same as above with PoE 

Optional remote powering, or repeaters 

• Small Cell or mobile base station unit or 

any additional equipment can be 

powered using PoE. 

• ML684DTP offers 2 PoE interfaces for a 

total of 120W (with local power) or up 

to 50W through remote powering with 

Actelis remote power enclosure. 

• Hardened and compact to enable 

flexible deployments 

Point-to-Multi-Point (PTMP) backhaul 

– Hybrid Copper and Fiber 

• All configurations above can be supported also in a PTMP 

scenario where an aggregation unit, is used to collect the 

data from multiple WiFi location within a cabinet serving area 

in a specific neighborhood. 

o For Symmetric application with G.SHDSL - ML2300, 

ML230 or ML690E should be chosen based on the density 

required 

o For Asymmetric application with VDSL2, Any DSLAM can be 

used. 

o Fiber connected Small Cell or mobile base station can be also 

aggregated through Actelis aggregation units. 

• Actelis solution offer advanced QoS that can be effectively used 

to differentiate and prioritize the traffic per type, class of service as well as provider - if the backhaul 

pipe is used to aggregate traffic from multiple providers over the same bonded or fiber link 



Mobile Backhaul Utilizing Actelis Flexible Enclosures 

• Housing Actelis ML600, ML500, ML700 or 

ML684DTP 

• Offers high speed backhaul as well as 

flexible powering options :AC, DC or inline 

express powering 

• Powering the Actelis and the Small cell, 

/Mobile base stataion unit. 

• Remote in-line powering eliminates the 

need for local powering 

o Lowering site complexity 

o Lowring initial CapEx 

o Faster time to install 

o Lowering monthly recurring site cost 


Actelis Solutions Transportation 

TRANSPORTATION - ITS – INTELIGENT TRAFFIC SYSTEMS 

Federal, state, and municipal governments are increasing the efficiency of traffic flows, increasing safety, 

reducing pollution, and avoiding or delaying the need for costly upgrades to road systems by actively 

monitoring and controlling them as part of an intelligent traffic systems network. They are also increasingly 

offering WiFi as a public service. This requires the placement of various traffic and environmental sensors, 

signal controllers and electronic signs, HD cameras and hotspots throughout the metro. Copper is the easiest 

and most efficient way to get high performance bandwidth where it is needed, and Actelis Networks 

provides an ultra-reliable, low maintenance, cost efficient solution for backhauling these sensors and 

cameras over copper on one integrated IP/Ethernet network. A recognized name in Intelligent Traffic 

Solutions, Actelis makes hardened, space efficient solutions purpose built to meet major ITS networks’ 

specifications. 

Actelis offers a portfolio of rugged and reliable hybrid solutions supporting Fiber, G.SHDSL and VDSL2 

Ethernet switches that are environmentally hardened and mount in a street cabinet, in a vault, on a pole, or 

on a wall or strand. Suitable copper is typically available wherever needed throughout metro road grid, 

and at many places along highways. 

Actelis ITS portfolio includes ML600 and ML684Dx platforms that provide up to 8 Ethernet user ports which 

can connect HD cameras, traffic and environmental sensors, and WiFi hotspots using G.SHDSL bonded 

copper. Actelis ML680Dx and ML500 portfolio allowing cost effective connectivity over fiber as well as 

ML700 that utilize bonded VDSL2. Actelis ML690E, ML230 and ML2300 aggregation switches provides 

termination for 8, 16, 32 and up to 256 copper pairs, delivering an efficient handoff to collocated 

IP/MPLS switches, routers, and controllers. 

Flexible topologies including drop-and-continue networking (2+2 and 4+4 EAST/WEST) for flexible daisychain 

deployment topologies along streets, extending service well beyond typical metro fiber points of 

presence. Options in environmentally hardened, DIN rail mount, small form factor, and fanless units suited 

for the most challenging environments are available. Actelis’ copper-based ITS solutions can also be 

seamlessly extended off metro fiber rings. 


• Fiber, Copper or hybrid solutions - Leverage the existing fiber or copper network - 

• Uses ubiquitous copper network to deliver high bandwidth, Extended reach for remote locations. 

o ML600 based solutions - up to 30 Mbps - 2 pairs, 60 Mbps - 4 pairs, 120 Mbps - 8 pairs and 240 

Mbps - 16 pairs. ML700 (US+DS) - Up to 300 Mbps – 2 pairs, Up to 750 Mbps – 8 pairs 

• Highest link and equipment reliability - Best in class transmission over copper 

• Hardened solution: -40 0 C to +74 0 C or -40 0 F to +165 0 F- Fit for environmentally challenging 

installations 

• Extremely compact, fanless DIN rails - Fits into space constrained cabinets or vaults 

• Integrate existing and legacy devices 

• Flexible topologies - Ring, Daisy Chain architecture with Drop and Continue 

• Extenders and Repeaters for extra distance where needed 

• Up to 8 Ethernet interfaces, PoE as well as serial Interface to support legacy equipment – Full 

connectivity and aggregation at remote location 



• Product Included in this solution: 

AGGREGATION 

Ethernet Switches 

All-In-One 


ML2300 ML230 ML690E 

(Rack mount) 

Ethernet Switch 



ML600 ML700 ML500 

Media Converter 


bonding 


PoE 


Extender 

lines 

Repeaters 

XR239 

Drop and Continue - bonded copper twisted pairs 

Enabling high bandwidth 

transport over the existing 

twisted copper pairs to 

support evolving needs 

for more real-time video, 

road signs, advanced 

sensors and controllers 

along highways and 

roads. 

• Up to 30 Mbps over 2 bonded pairs, 60 Mbps over 4 pairs and up to 100 M over 8 pairs 

• Advanced 8 pair Ethernet switch to support all connectivity needed per location. 

• 6 Ethernet 10/100 baseT, 2 SFPs 100/1000 BaseFX 

• Low delay allowing support for multiple hops with no degradation in video quality 

• Hardened, Extended temp -40 to +74C 

• Flexible DIN rail, 19” rack mounting or pole/wall mounting with Actelis enclosure 

• Optional (more details on sections below) 

o Actelis XR239 repeaters for extended reach 

o PoE support – 2 interfaces per location 

o Serial interface 



o Remote powering 

Drop and Continue –fiber based 

Enabling high bandwidth 

transport to support evolving 

needs for more real-time 

video, road signs, advanced 

sensors and controllers along 

highways and roads. 

• Up to 1 Gbps 

• Advanced 8 pair 

Ethernet switch to support all connectivity needed per location. 

• 6 Ethernet 10/100 BaseT, 2 SFPs 100/1000 BaseFX 

• Low delay allowing support for multiple hops with no degradation in video quality 







Drop and Continue - 4-Way –Hybrid Fiber-Copper 

Supporting 4-way drop and continue 

topologies over fiber and copper. 

Enabling high bandwidth transport to 

support evolving needs for more 

real-time video, road signs, 

advanced sensors and controllers 

along highways and roads. 

• Up to 1 Gbps 

• Advanced 8 pair Ethernet switch 

to support all connectivity 

needed per location. 

• 6 Ethernet 10/100 BaseT, 

2 SFPs 100/1000 BaseFX 

• Low delay allowing support for 

multiple hops with no 

degradation in video quality 





Fast Heading Rings – ERPS V2 –fiber based 

Enabling high bandwidth transport to support evolving needs 

for more real-time video, road signs, advanced sensors and 

controllers along highways and roads. 

• Fiber Ring - Up to 1 Gbps 

• Advanced 8 pair Ethernet switch to support all connectivity 



• Low delay allowing support for multiple hops with no 



• Flexible DIN rail, 19” rack mounting or pole/wall mounting 

with Actelis enclosure 





Fast Heading Rings – ERPS V2 – Hybrid fiber – Copper 

Enabling high bandwidth transport to support evolving needs for 

more real-time video, road signs, advanced sensors and 

controllers along highways and roads. 

• Fiber Ring - Up to 1 Gbps 















High Bandwidth + PoE to Camera, WiFi at site 

PoE interfaces to simplify installation and provide powering to a 

camera or WiFi or any other equipment located on site. 

• 2 PoE interfaces 

• A total of 120W (with local power) or up to 50W through 

remote powering with Actelis remote power enclosure. 









Media Converter – Ethernet-Serial, Fiber-Copper 

ML680Dx can be used as a media converter to simplify installation and lower the number of equipment 

required per site. 

• Ethernet over Fiber (100/1000BaseFX) to Ethernet 100 Base T 

o 2 fiber ports and 6 Ethernet (copper) ports 

• Serial-To-Ethernet – ML680D supports the following serial interfaces: RS-485 422/232 enabling 

legacy traffic to be effectively distributed using the higher speed links 


Actelis Solutions Campus, Education, Surveillance 

CAMPUS, EDUCATION AND DISTANT LEARNING - CONNECTIVITY AND SURVEILLANCE 

Today’s universities, colleges, and K-12 school systems all need reliable, high speed bandwidth everywhere. WiFi 

has become an essential tool for enhancing productivity and communication all over the campus, while the 

increasing use of surveillance cameras throughout the grounds is critical for reasons of safety and security. 

Similarly, In K-12 school systems, adequate surveillance is essential to ensure safety and security on parking lots, 

playgrounds and athletic fields as well as within buildings, while additional WiFi can be useful for providing 

connectivity to temporary classrooms or athletic fields. With K-12 schools, sometimes just getting adequate 

broadband access to the school itself can be extremely difficult and expensive, depending on the school’s 

location. 

Educators need more bandwidth for both access and transport, but fiber is frequently not available everywhere it 

is needed, nor is it quick or affordable to build it out to reach all the diverse and sometimes remote locations 

where broadband is required. Actelis Networks has the answer: reliable, high speed broadband over copper. 

Actelis’ EFM over Hybrid Fiber-Copper solutions utilize the widely available copper twisted pairs and its “bonded 

copper” technology to create a reliable, high speed transport. Up to 100s of Mbps can be achieved for 

broadband access, transport, as well as a diverse access or transport media. Actelis solutions can also provide 

10s of Mbps of bandwidth, extend reach to 100 kft and beyond, and support a variety of network topologies. 

With Actelis copper can be effectively used as a complement and extension off existing fiber network, or as a 

temporary solution with a smooth and easy migration path from copper to fiber wherever and whenever needed. 


• Provides intra-campus connectivity as well as broadband access over fiber, copper or hybrid 

topologies 

• High bandwidth where you need it - Bonding up to 16 and 32 pairs. - 

Up to 30 Mbps/2 pairs, 120 Mbps/8 pairs and 240 Mbps/16 pairs. 

• highest link availability and performance for multimedia applications and video 

• Fit Anywhere: Hardened solution: -40 0 C to +74 0 C/-40 0 F to +165 0 F- For environmentally challenged 

locations 

• Flexible topologies - Ring, Daisy Chain architecture with Drop and Continue 

• Advanced Security mechanisms 

• Optional Input/output relays for location control – e.g. Lock door. Siren activation 

• Extenders and Repeaters for extra distance where needed 

• Up to 8 Ethernet interfaces, PoE as well as serial Interface to support legacy equipment – Full 

connectivity at location 




AGGREGATION 


All-In-One 


ML2300 ML230 ML690E 

(Rack mount) 




ML600 ML700 ML500 



bonding 


PoE 


Extender 

lines 

Repeaters 

XR239 

High-speed Ethernet Access to a Remote School Using Ethernet over Copper 

A remote school need higher speed connectivity 

to support its data voice and video. 

Bonded copper can be use if fiber is not 

available, at a fraction of the cost, time 

and complexity needed to run new fiber. 

Typical examples – High speed access to: 

• Neighborhood schools with 

no access to fiber 

• Regional schools in the country 

with no access to fiber 

Both symmetrical as well as asymmetrical 

solutions can be offered using either EFM 

over bonded G.SHDSL (ML600) or EFM 

over bonded VDSL. (ML700) 



High speed WiFi Backhaul using Ethernet over copper 

Increase WiFi coverage, speeds and 

availability by providing higher speed 

backhaul to existing location as well as 

new locations that cannot be reached 

quickly and cost effectively with fiber. 

Typical examples: 

Greater WiFi coverage 

for 

• Remote Athletic 

fields, parks, 

• Parking lots, bus 

stops 

Dorms, temporary 

class rooms 

High speed Ethernet backhaul for enhanced campus-wide surveillance 

Transport of HD video from multiple cameras and smart 

sensors back to a central monitoring center to allow 

for higher security and safety. 

Typical Examples: 

• HD cameras distributed all around 

campus and on emergency poles 

• HD cameras within/around a 

building/warehouse, dorms along 

with advanced sensors 

• HD cameras at a campus remote 

parking lot, remote athletic gym 


Actelis Solutions Utility and Industrial 

UTILITY 

Globally, Utility providers, including electric, gas, oil and water companies, are looking to improve their 

communication networks in order to maximize the benefit of their growing deployments of Advanced 

Metering Infrastructure (AMI) including new “smart grid” devices, surveillance video cameras, new IP sensors 

and advanced information exchange protocols. 

A migration toward an IP centric, high bandwidth, advanced and reliable communication network is 

required, not only between central substations, power plants, and administration offices but throughout the 

network to ensure effective service delivery, outage management and overall productivity. 

Cost efficiency is a top priority for utility providers. Fiber typically does not reach all locations across the 

grid and is often is cost justified only if it is already present. Utility networks have an abundance of existing 

copper infrastructure that can be immediately and cost effectively utilized to deliver IP/Ethernet services at 

high throughput to all necessary locations. 

Actelis offers several Ethernet over bonded copper solutions for high capacity symmetric (G.SHDSL) and 

asymmetric (VDSL/ADSL) utility transport applications. Actelis comprehensive portfolio of All-In-One 

Industrial Ethernet switches and extenders - ML600Dx, as well as its ML600 and ML700 Ethernet Access 

Devices (EADs) offer high speed aggregation for a variety of device located at the far-end location. These 

devices can include SCADA equipment, Ethernet systems (switches, routers, WiFi access points), IP data 

sensors, Serial devices, surveillance video, legacy TDM, and PoE devices. Actelis environmentally hardened 

enclosures can be used for deployment at outdoor sites, these were designed with high MTBF to minimize 

ongoing operational costs. 

At the headend, network concentration points, Actelis ML230/2300 aggregation switches provide 

termination for up to 256 copper pairs, delivering an efficient handoff to collocated IP/MPLS switches, 

routers, controllers, and other IP equipment via standards compliant interfaces. Optionally, the ML700 can 

be deployed at an aggregation node to terminate downstream VDSL/ADSL connected Ethernet 

switch/EADs. In addition, Actelis extenders, the BBA working with the ML700 and the XR239 repeaters with 

the ML600 can be further use to extend and expand the bandwidth, reach as well as the reliability of the 

bonded copper link. 


• Immediate and cost effective high bandwidth network communication over the existing copper – 

200+Mbps with 8 pairs (bonded VDSL2) or 16 pairs (bonded G.SHDSL) solutions 

• Repeaters (G.SHDSL) and Amplifiers (VDSL/ADSL) - extended reach, expanded bandwidth 

• Flexible topologies optimized for various scenarios: Rings, Drop and Continue, backend, Tree 

• Market leading reliability and service availability - advanced technology and redundant features, 

Service continuity under multiple failure scenarios 

• Low delay to effectively support real time video surveillance 

• Advanced Security 

• Fit space & environmentally challenged locations - Extended temp., Comprehensive lightning protection 

• Optional Input/output relays for location control – e.g. Lock door. Alarm activation 

• Multiple Ethernet ports, PoE as well as serial Interface to enable – Full connectivity at remote location 

• Remote powering option eliminating the need for local powering 




AGGREGATION 


All-In-One 


ML2300 ML230 ML690E 

(Rack mount) 




ML600 ML700 ML500 



bonding 


PoE 


Extender 

lines 

Repeaters 

XR239 



High speed communication and surveillance along a pipeline 

Surveillance is required in multiple points along 

a long pipeline. Outdoor environment and No 

Local Power can be provided. 

Using Actelis compact and hardened ML684DTP 

devices to aggregate video as well as sensors 

or other equipment located at these locations 

towards a central control room. 

Intra network connectivity between 

multiple sites 

Limited bandwidth available between sites. 

Extreme environmental conditions, Outdoor 

installations. High reliability and availability are a 

must. 

Utility network as well as municipality have much 

higher quality copper, e.g. 0.8 or 1 mm, that can 

enable higher transmission rate even to very king 

distances. A lot of existing locations are still 

connected with thick copper. 

Using Actelis advanced technology both bandwidth 

and reliability needs were accomplished. 

High Bandwidth Connectivity Between Extremely 

Remote Location > 30Km 

Replacing Legacy Equipment 

Enhance communication channel throughout the utility 

distribution network to enable effective monitoring and control 

via a network of sophisticated sensors, management as well as 

security and surveillance (Video) equipment. Replace existing 

legacy equipment (such as PDH and E1 based) and use the 

copper to provide much higher throughput and higher 

reliability and service availability. Very long link requiring 

many repeaters. 


Actelis Products – Products by Type 

PRODUCTS 

PRODUCT BY TYPE 

Aggregation Solutions 

Actelis offers a variety of aggregation solution to cost effectively support various network/location 

scenarios. 

Actelis aggregation platforms are field proven, high-performance transport/access systems that enable 

service providers and enterprises to deliver high-bandwidth, high-quality Carrier Ethernet services with low 

delay over existing multiple voice grade copper pairs reaching customers and/or facilities beyond the 

fiber network. 

Highlights: 

• Cost optimized platforms - Optimal sized platforms to fit Large to Small CO/locations sizes and 

application needs. 

• Carrier class design - Chassis based, pluggable cards, advanced equipment and facility 

redundancy schemes 

• Cost effective high density solution - Up to 64 pairs per RU 

• Higher throughput, wider coverage and higher reliability - Actelis' EFMplus and Symmetrical 

Vectoring unique technologies delivering more revenues with lower CapEx and OpEx - Highest 

customer density per RU 

• Scalable capacity per customer - Bonding across 2-32 pairs, 200+ Mbps link capacity 

• Cost effective aggregation and network integration - Flexible topologies including ERPS rings, 

Multiple network connectivity. 

• MEF CE2.0 certified advanced 

Carrier Ethernet Capabilities 

Actelis aggregation solution are 

summarized on the table. 

For more details, please see the 

following sections per each 

aggregation unit. 



EAD/NID/NDD Solutions 

Actelis Ethernet Access Devices (EADs) are compact Carrier Ethernet field proven, high-performance 

access/transport platforms that enable service providers and enterprises to deliver high-bandwidth, highquality 

Carrier Ethernet services with low delay over multiple copper pairs to customers and/or facilities 

served by copper. 

Highlights: 

• Broad Portfolio - Multiple platform options supporting symmetrical (G. SHDSL) or asymmetrical 

(VDSL2/ADSL2/2+) transport over copper and fiber 

• EAD/ NTU/Drop and Continue Device - Cost effective EAD for direct services to customers, NTU for 

transport applications as well as Drop and Continue device supporting multiple hops. 

• Higher throughput, Wider coverage and Higher reliability with Actelis’ EFMplus and Symmetrical 

Vectoring (DRB) unique technologies delivering more revenues with lower CapEx and OpEx 

• Scalable - Bonding across 4-16 pairs and 200+ Mbps link capacity 

• Flexible Interfaces - 4+ Ethernet, 2 SFPs, 4 T1/E1 and synchronization interfaces 

• MEF CE2.0 certified and TDM PWE services 

• Advanced Carrier Ethernet capabilities including: 4+ QoS, VLANs, Enhanced OAM, Y.1564 

• Flexible installation - Compact ½ 19" wide, hardened device, Optional AC, DC or Line powering, 

and Self-contained outdoor enclosures 

Actelis portfolio of EADs/NID/NTUs includes: 



Reach and Rate Extenders - Repeaters and Amplifiers 

Actelis offers two types field proven high performance of extenders enabling service providers and 

enterprises to extend and expand the delivery of high-bandwidth, high-quality Carrier Ethernet services. 

• A Repeater based solution for Ethernet over bonded G.SHDSL - XR239 and PFU-8x product lines 

• An Amplifier based solution for Ethernet over VDSL/ADSL – BBA product line. 

Actelis’ XR239 extend the reach of EFM services by regenerating the signal. Up to 8 repeater hops (9 

segments) can be supported per link extending Ethernet to more than 100Kft (30Km). Actelis XR239 

repeaters are remotely powered by the Actelis PFU-8 power feeding units and can be used with any 

Actelis aggregation ML2300/ML230/ML690 

and ML600 EAD/NTU devices. Integrated 

advanced trouble shooting, monitoring and 

remote software upgrade capabilities allow to 

significantly simplify installation and lower 

maintenance cost. 

Actelis’ Broadband Amplifiers (BBA) product line include the ADSL Broadband Amplifier – i.e. the ABA, 

and the VDSL Broadband Amplifier – i.e. the VBA. The BBAs are field proven, high-performance solutions 

that enable service providers and enterprises to extend and expand the delivery of high-bandwidth, highquality 

Carrier Ethernet services over DSL (VDSL2, ADSL/2/2+). In fact, 

Actelis BBA products have demonstrated overall rate gain downstream 

improvements of greater than 100% over non-amplified lines. The BBAs 

can work with any vendor DSLAM or DSL CPE. BBAs are remotely line 

powered by POTS eliminating the cost and complexity involving local 

powering. 



Management Solutions 

Actelis Networks offers advanced management solutions and capabilities allowing service providers to costeffectively 

and efficiently accelerate their broadband deployments, while shortening ‘time to service’ and 

increasing service availability, all contributing to reducing operational expenses and complexity. 

Actelis management suite includes - the MetaASSIST EMS, the MetaASSIST View GUI application and 

comprehensive OA&M capabilities integrated within Actelis products portfolio. 

Actelis’ management solution offers core management capabilities, including Fault, Configuration, 

Performance, and Security Management, all of which are in accordance with ITU Telecommunication 

Management Network (TMN) standards and FCAPS model to enable the following key benefits: 

• Accelerating Service deployment: Faster ‘time to service’– “Zero Touch” provisioning, pre-defined 

profiles for automated configuration and software upgrades. 

• Accelerate service reliability and availability through comprehensive diagnostic and trouble shooting 

at L1/L2, network/service level, effective 

gathering presentation and analysis. 

• Scalable Management Solutions - Support 

growth with up to 5k COs per EMS server 

and up to 20K CPEs. 

• Carrier Class Solutions - Redundancy 

for high availability, Advanced Security and 

access control mechanizes 

• Northbound interfaces, XML/JSON, SNMP, 

TL1, to allow easy integration with existing 

management systems. 


PRODUCT BY NAME 

BBA – ABA 

ADSL Broadband 

Amplifier 

The Actelis ADSL Broadband Amplifier (ABA) enables service operators to 

significantly enhance ADSL/2/2+ bandwidth and distance capabilities to 

cost effectively reach more customers with higher service levels at low cost. 

The ABA offers higher bandwidth to grow profitable high speed 

residential broadband services as well as to comply with regulator 

demands. 

The Actelis’ ABA is a plug 'n play, line powered device that can be 

flexibly placed at a convenient splice or termination point between the 

DSLAM and the customer DSL modem. It is fully compatible with POTS 

services. 

Main Applications: Residential Broadband Significantly Increases the size 

of the DSLAM's serving area, gets high speed broadband to more 

customers and enable more revenues. 10/1 Mbps up to 20Kft 

The ABA offers 

• Enhances coverage up to 100% 

• Improves bandwidth up to 100% (and beyond) 

• Increase reach for CAF-II services 

• Enable stable service for long and chronic copper links. 

• POTS line powering 

• DSLAM and CPE agnostic 

• Supports bonding 

• Flexible Enclosures supporting 2, 4 and up to 24 ports 

• Optional “Flash” tool to ease installation and trouble shooting 


BBA – VBA 

VDSL Broadband 

Amplifier 

The Actelis VDSL Broadband Amplifier (VBA) enables service operators to 

significantly enhance VDSL2 bandwidth and distance capabilities to cost 

effectively reach more customers with higher service levels at low cost. 

The VBA offers higher bandwidth to grow profitable high speed 

residential broadband services as well as to comply with regulator 

demands. 

The Actelis’ VBA is a plug 'n play, line powered device that can be 

flexibly placed at a convenient splice or termination point between the 

DSLAM and the customer DSL modem. It is fully compatible with POTS 

services. 

Main Applications: Residential Broadband Significantly Increases the size 

of the DSLAM's serving area, gets high speed broadband to more 

customers and enable more revenues. Business and Backhaul Services 

requiring higher level of service as well as bonding of more than 2 pairs. 

The VBA offers 

• Enhances coverage up to 100% 

• Improves bandwidth up to 100% (and beyond) 

• Increase reach for highly demanded 100, 50 and 25Mbps services 

• Optimized for lower ratio between DS and US 

• Enable stable service for long and chronic copper links. 

• POTS line powering 

• DSLAM and CPE agnostic 

• Supports bonding 2 pairs and up to 8 pairs 

• Extend Vectoring benefits further into the network 

• Flexible Enclosures supporting 4 and up to 24 ports 

• Optional “Flash” tool to ease installation and trouble shooting 


ML230 

Medium Aggregation 

Platform 

The ML230 is a hardened compact EFM aggregation for Actelis EADs 

offering cost effective and immediate deployable delivery of Ethernet 

services and transport, over bonded copper (G. SHDSL) and Fiber. The 

ML230 modular design provides very high density of 64-ports per RU and 

supports multiple links, extending Ethernet services of up to 400 Mbps over 

bonded copper and up to 1G over fiber. CE 2.0 certified, and utilizing 

Actelis EFMplus and Symmetrical Vectoring technologies, ML230 delivers 

much higher bandwidth with higher SLAs and fiber reliability to longer 

distances, reaching more customer and creating more revenues than any 

other solutions available in the market. 

ML2300 supports flexible topologies, advanced troubleshooting and 

comprehensive OAM capabilities that enable easy integration within existing 

Telco or vertical networks. ML230 can be managed by Actelis management 

solution suite - MetaASSIST view and MetaASSIST EMS. 

ML230 applications includes Telecommunication applications such as business 

Ethernet service distribution, high speed backhaul application for DSLAMs, 

wireless and mobile networks as well as for delivering Ethernet in various 

verticals such as Transportation, Government, Campus Surveillance, Utility 

and Education. 

• Ethernet over bonded copper or 

fiber 

• 6 slot chassis, 6U high 

• High reliability and resiliency 

• PTP, PTMP, Multiple ERPS rings 

• Hardened, deployable in any 

Environment 

• Front or rear access card 

• Up to 128 links, and 256 pairs. 

Stacking for higher density 

• Up to 15 Mbps per pair, bonding 

up to 32 pairs per link, delivery 

of up to 400 Mbps per 

customer/location. 

• Worldwide Spectral Compliancy 


ML500 

Fiber EAD 

(no bonded copper) 

CE 1.0 Compliant 

The ML500 is a compact platform for Carrier Ethernet over fiber 

applications. ML500 comes in a 1RU high by half rack width wide fixed 

form factor, for flexible deployment in various environments. ML500 can 

be deployed as an EAD/NTU in a Point-to-Multi-Point scenario 

connected to an Actelis aggregation switch - ML2300, ML230, in a ring 

configurations or book-ended in a Point-To-Point configuration. 

Actelis’ fiber portfolio complement Actelis’ Ethernet over copper 

offerings enabling high speed carrier class Ethernet service and 

transport over both bonded copper as well as fiber. 

ML530 is fully compliant with the MEF 9 and 14 specifications. The 

ML530 EAD provide 802.1q VLAN-aware wire-speed bridging,double 

tagging (VLAN stacking),VLAN transparency, L2 (Ethernet priority) and 

L3 (ToS/Diff-Serv) classification with four traffic classes, RSTP/STP, ERPS, 

bandwidth monitoring, and Multicast/ Broadcast limiting. The Actelis 

ML530 EAD can be effectively used by service providers to safely 

aggregate multiple services or multiple subscribers on the same Ethernet 

access uplink 

The ML500 EADs provide proactive and dynamic tools for enhanced 

trouble shooting and monitoring capabilities including 802.3ah, CFM 

(802.1ag) and Y.1731 (ITU). 

The ML500 EADs can be managed by Actelis’ MetaASSIST View and 

via the multi-platform Element Management System, MetaASSIST EMS. 

ML500 applications includes Telecommunication applications such as 

Ethernet business services, high speed backhaul application for DSLAM, 

wireless and mobile backhaul as well as for delivering Ethernet in 

various verticals for long reach and high bandwidth such as 

Transportation, Government, Campus Surveillance, Utility and Education 

• Ethernet over fiber 

• Up 7 port switch up to 1G per 

uplink. 2 SFPs 

• Flexible topologies PTP, PTMP 

(CPE), ERPS* 

• MEF compliant – Advanced 

traffic management and OAM 

• Compact up to 2 units in 1U 

high, 19”. 


Environment 


ML600/E 

Hybrid Fiber Bonded 

Copper Platform 

CO/EAD 

Bonded G.SHDSL 

The ML600/E is a hardened compact EFM unit that can be used as a 

CO/Headend unit in PTP, ring topology or as a CPE/EAD/NDD/NTU/NID, 

in PTMP/PTP topologies. Actelis ML600/E offers a cost effective and 

immediate delivery of Ethernet services and/or transport, over bonded 

copper (G. SHDSL) or fiber. Two ML600 can be installed in a single 1U/19” 

rack space. 

ML600 supports a single link over up to 16 pairs of bonded copper as well 

as fiber based links. ML600/E products extend Ethernet services of up to 

240 Mbps over bonded copper and up to 1G over fiber. CE 2.0 certified 2 , 

and utilizing Actelis EFMplus and Symmetrical Vectoring technologies, 

ML600/E product-line delivers much higher bandwidth with higher SLAs and 

fiber reliability to longer distances, reaching more customer and creating 

more revenues than any other solutions available in the market. 

Including the following 

product lines: 

ML640/E 

ML650 

ML630 

ML620 

ML620I 

ML600/E supports advanced troubleshooting and comprehensive OAM 

capabilities that enable easy integration within existing Telco or vertical 

networks. Moreover, ML600/E integrated fiber interfaces allow for a 

smooth migration from copper to fiber when/if fiber becomes available. 

ML600/E can be managed by Actelis management solution suite - 

MetaASSIST view and MetaASSIST EMS. 

The ML650S offers Ethernet and TDM hybrid solution supporting PWE as 

well as advanced clocking capabilities. 

ML600/E/applications includes Telecommunication applications such as 

Ethernet business services combining support for legacy as well as Ethernet, 

high speed backhaul application for legacy and new services including 

clocking requirements – applicable for DSLAM, wireless and mobile 

backhaul as well as for delivering Ethernet in various verticals for long 

reach and high bandwidth such as Transportation, Government, Campus 

Surveillance, Utility and Education. 

. • Ethernet over bonded copper or 

fiber 

• Compact up to 32 pair in 1U 

high, 19”. 


• PTP, PTMP (CPE), ERPS ring (mix 

of fiber/copper supported) 


Environment 

• MEF certified/compliant (per 

model) 

• Up to 15 Mbps per pair, 

bonding up to 16 pairs per link, 

delivery of up to 240 Mbps per 



2 CE 2.0 


ML600 EAD General Classification: 

ML600 EADs – Additional feature comparison 


ML600Dx 

All-In One Industrial 

Switch & Extender 

Actelis’ ML600Dx family offers hardened Industrial Ethernet switches 

designed for challenging environments. The ML600Dx products provide high 

bandwidth, market leading reliability, and extremely small form factor. 

Flexible topologies such as fast healing rings and Drop-and-Continue are 

supported to meet the demands of intelligent traffic systems, surveillance, 

railway, municipal, and utility networks applications. 

Featuring a full front access, compact, hardened, fanless design and 

mountable almost anywhere, the ML600Dx product line enables taking 

more high performance Ethernet bandwidth to more places easily, quickly, 

and cost effectively. 

ML600Dx All-In-One Industrial Ethernet devices offer a unique combination o 

features making it the most cost effective solution available in the market. 

Including the following product 

lines: 

• ML684Dx 

: Hybrid Fiber -Copper 

• ML680Dx 

– Fiber Only 

• ML620Dx 

– Entry Level device 

• ML604D 

- Extender over 4 bonded 

copper pairs 

• Greater Bandwidth for Higher 

performance over Longer 

Distances 

• Comprehensive Reliability, 

Redundancy and Availability 

• Proven Enhanced Security - 

Reduced Vulnerability 

• Guaranteed QoS Transmission 

via Multipath and Media 

• Extended Reach PoE Solution A 

8-port Ethernet switch including 

two fiber interfaces (SFPs)- 

• Simplifies networks – 

Aggregates multiple devices at 

remote location (camera, sensors, 

controller.) 

• Serial interface supporting RS- 

232/V.24/RS-422/RS-E485. 

• Media Converter - Allowing 

conversion between any of the 

following - Ethernet over Fiber to 

Ethernet Copper to Ethernet over 

bonded copper. 

• Extremely Compact and 

Hardened - -40 to +74 C 

• ML684Dxx – Hybrid Fiber Copper platform 

o ML684D - Drop and Continue, PTP, PTMP and ERPS rings, Up to 60 Mbps over copper and 1G over 

fiber, 8 ports Ethernet switch inc. 2 SFPs (1Gbps) 

o ML684DT - ML684D + Serial Interface 

o ML684DTP - ML684D + Serial Interface and 2 PoE 

• ML680DFxx - Fiber Only 

o ML680DF - Drop & Continue, PTP, PTMP, ERPS rings. Up to 1G over fiber, 8 ports Ethernet switch 

inc. 2 SFPs (1Gbps) 

o ML680DFT -ML680D+ Serial Interface 

o ML680DFTP - ML680D + Serial Interface and 2 PoE 

• ML62xD - Entry Level Device 

o ML624D - 2+2 Only 

o ML622D - 1+1 or 2 bonded copper links, Basic switch 

• ML60xD – Extender - ML604D - One Ethernet port 


ML690E - ML690ES 

Compact Mini 

Aggregation 

Platform 

Including the following models: 

• ML6916E 

• ML698ES 

• ML6916ES 

The ML690 is a hardened compact EFM aggregation for Actelis EADs 

offering cost effective and immediate deployable delivery of Ethernet 

services and transport, over bonded copper (G. SHDSL). Two ML690 can be 

installed in a single 1U/19” offering a density of 32 pairs per RU. 

ML690E/ES supports multiple links, extending Ethernet services of up to 240 

Mbps over bonded copper and up to 1G over fiber. CE 2.0 compliant, and 

utilizing Actelis EFMplus and Symmetrical Vectoring technologies, 

ML690E/ES product line delivers much higher bandwidth with higher SLAs 

and fiber reliability to longer distances, reaching more customer and 

creating more revenues than any other solutions available in the market. 

ML690E/ES supports flexible topologies, advanced troubleshooting and 

comprehensive OAM capabilities that enable easy integration within 

existing Telco or vertical networks. ML690 can be managed by Actelis 

management solution suite - MetaASSIST view and MetaASSIST EMS. 

The ML690ES offers additional SyncE feature as well as a startum3 internal 

clock and can be used for clock domain distribution. 

ML690E/ES applications include Telecommunication applications such as 

bandwidth to the building, Ethernet business services high speed backhaul 

application for DSLAMs, wireless and mobile networks as well as for 

delivering Ethernet in various verticals such as Transportation, Government, 

Campus Surveillance, Utility and Education 


fiber 

• Compact aggregation, up to 32 

pair in 1U high 


• PTP, PTMP, ERPS ring 


Environment 




bonding up to 16 pairs per link, 

delivery of up to 240 Mbps per 




ML 700 

Hybrid Bonded VDSL and 

Fiber 

CE 2.0 Compliant 

ML700 delivers high speed Carrier Ethernet services over up to 8 

bonded copper pairs utilizing VDSL2/ADSL2+/ADSL2/ADSL 

technologies. ML700 can support up to 750 Mbps. 

The ML700 offer MEF compliant services, 802.1q VLAN-aware wirespeed 

bridging, double tagging (VLAN stacking), advanced provisioning 

using Ethernet Virtual Connections (EVCs), L2, L3 and L4 classification 

with flexible mapping into eight traffic classes to maximize the efficiency 

of access bandwidth. 

ML700 EADs offer the highest link resilience and best-in-class customer 

Quality of Experience (QoE) through its unique implementation of SRA 

(Seamless Rate Adaptation) and Impulse Noise Protection (INP) 

mechanisms in accordance with G.inp for unsurpassed bonded-link 

reliability. 

The ML700 EADs provide proactive and dynamic tools for enhanced 

trouble shooting and monitoring capabilities including 802.3ah, CFM 

(802.1ag) and Y.1731 (ITU). 

The ML700 EADs can be managed by Actelis’ MetaASSIST View and 

via the multi-platform Element Management System, MetaASSIST EMS. 

ML700 applications includes Telecommunication applications such as 

Ethernet business services, high speed backhaul application for DSLAM, 

wireless and mobile backhaul as well as for delivering Ethernet in 

various verticals for long reach and high bandwidth such as 

Transportation, Government, Campus Surveillance, Utility and Education 

• Ethernet over bonded copper 

or fiber 


bonding up to 1-8 pairs per 

link, delivery of up to 750 

Mbps per customer/location. 


G.INP for bonded link 

• Flexible Interfaces – Up to 7 

Ethernet including 2 SFPs 

• MEF compliant – Advanced 

traffic management and OAM 

• PTP, PTMP (CPE), ERPS* ring (mix 

of fiber/copper supported) 

• Compact up to 16 pair in 1U 

high, 19”. 


Environment 



ML2300 

Large Aggregation 

Platform 

The ML2300 is a hardened EFM aggregation for Actelis EADs offering cost 

effective and immediate deployable delivery of Ethernet services and 

transport, over bonded copper (G. SHDSL) and Fiber. The ML2300 modular 

design provides very high density of 64-ports per RU and supports multiple 

links, extending Ethernet services of up to 400 Mbps over bonded copper and 

up to 1G over fiber. CE 2.0 certified, and utilizing Actelis EFMplus and 

Symmetrical Vectoring technologies, ML2300 delivers much higher bandwidth 

with higher SLAs and fiber reliability to longer distances, reaching more 

customer and creating more revenues than any other solutions available in the 

market. 

ML2300 supports flexible topologies, advanced troubleshooting and 

comprehensive OAM capabilities that enables easy integration within existing 

Telco or vertical networks. ML2300 can be managed by Actelis management 

solution suite - MetaASSIST view and MetaASSIST EMS. 

ML2300 applications includes Telecommunication applications such as business 

Ethernet service distribution, high speed backhaul application for DSLAMs, 

wireless and mobile networks as well as for delivering Ethernet in various 

verticals such as Transportation, Government, Campus Surveillance, Utility and 

Education. 


fiber, CE 2.0 

• 6 slot chassis, 6U high 


• PTP, PTMP, Multiple ERPS rings 


Environment. 

• Front or rear access cards 



• Up to 15 Mbps per pair, bonding up 

to 32 pairs per link, delivery of up 

to 400 Mbps per customer/location. 



REPEATERS – EFM 

Repeaters – XR 239 and 

PFU 8 

Actelis Networks Ethernet First Mile (EFM) repeater products are field proven, 

high-performance solutions that enable service providers and enterprises to 

extend and expand the delivery of high-bandwidth, high-quality Carrier 

Ethernet services. 

Actelis’ XR239 extend the reach of EFM services by regenerating the signal 

between the carrier’s central office and customer premises. Up to 8 repeater 

hops (9 segments) can be supported per link extending Ethernet to more than 

100Kft (30Km). Actelis XR239 repeaters are remotely powered by the 

Actelis PFU-8 power feeding units and can be used with any Actelis 

aggregation ML2300/ML230/ML690 and ML600 EAD/NTU devices. 

Integrated advanced trouble shooting, monitoring and remote software 

upgrade capabilities allow to significantly simplify installation and lower 

maintenance cost. 

Actelis XR239 repeaters can support up to 13Mbps per copper pair and are 

fully compliant with spectral regulations. The XR239 repeaters can be 

installed within existing 239 enclosures (North America standard enclosures 

replacing T1s) or within other enclosures to comply with various deployment 

scenarios worldwide. 

Actelis PFU-8x – 8 copper pairs are supported per PFU that can feed up to 

4 repeaters across 4 hops. A link can be dually fed from both sides to 

enable an 8 hop repeatered link and a significant enhancement in reach 

Highlights: 

• Advanced trouble shooting and fault isolation minimizing OpEx and truck 

roll 

• Simplified installation, including dual site feeding 

• Actelis patented Dynamic Spectral Shaping (DSS) algorithms to minimize 

interference to other binder service 

• T1.417 compliant (tested by Telcordia) 

• Expanded Reach and Rate - EFM repeater, up to 13 Mbps per pair, up 

to 8 hops (9 segments), beyond 100 kft 

• Flexible Enclosures for cabinet, pole and building mounts as well as within 

existing T1/E1 enclosures 


EAD/NTU Enclosures 

with Flexible Powering 

options 

Actelis Networks’ EAD/NTU enclosure solutions offer service providers and 

enterprises a compact, self-contained, NEMA3-hardened enclosure for 

outdoor/indoor installation applications. 

These enclosures can be used with all Actelis' EADs/NTUs - including 

ML600E/D, ML700 and ML500 product lines. 

The NEMA3 enclosures offer flexible powering and installation options to meet 

most requirements. It is ideal for locations where there is no cabinet/RT space 

available requiring either Pole/Wall Mounted or Strand Mounted solutions. 

The enclosures support redundant line powering from a central office or data 

center via dedicated express pairs as well as Local -48VDC, AC or Power 

over Ethernet (PoE) powering. 

Utilizing this hardened enclosure, service providers can install Actelis’ Ethernet 

Access Devices (EADs), enabling advanced Ethernet service or Ethernet-based 

backhaul to any location. This solution supports various applications such as 

Ethernet service distribution, Small Cell, WiFi and DSLAM backhaul, as well as 

surveillance applications for schools, universities and other campuses, and even 

traffic control. 



Actelis’ MetaASSIST EMS provides network operators with the 

ability to cost-effectively and efficiently accelerate their 

broadband deployments. It enables operators to scale their 

network, accelerating ‘time to service’ and increasing service 

availability, while reducing operational expenses and complexity. 

MetaASSIST EMS offers a carrier-class, user friendly platform for 

real-time planning, “Zero Touch” provisioning, monitoring, 

performance analysis, and management of networks with multiple 

Actelis elements. Actelis’ MetaASSIST EMS offers core management 

capabilities in accordance with the ITU TMN standard and FCAPS 

model enabling the following key benefits: 

• • Lowering OpEx and accelerating ROI 

• • Accelerating service availability and reliability 

• • Enhancing security with flexible access control mechanisms 

• • Accelerating scale of deployments 

Actelis’ MetaASSIST EMS XML northbound interface and its “Zero 

Touch’’ provisioning provides an automated solution to simplify 

service turn-ups, allowing more installations per day, fewer 

technician resources, and faster error-free configurations. This 

lowers operating expenses (OpEx), increases customer satisfaction 

and significantly accelerates deployment of new services. NE 

configuration backup/restore and centralized software 

management further simplify network operations. 

MetaASSIST EMA allow users to effectively define and run 

different operations on a group of elements or at a system level at 

a pre-scheduled time. The EMS also offers Built-in graphical tools 

for proactive and reactive performance analysis of NEs and 

services. 

Highlights 

• Built to scale - Up to 5K COs chassis and up to 20K NEs 

• Highly effective, automated and simple to define “Zero 

Touch” provisioning 

• Multiple Network Views - Rapid and Effective Fault Isolation & 

Network Diagnostics 

• Comprehensive security mechanisms. 

• Easy monitoring and reporting through scheduled tasks per 

NE or group of NEs. 


MetaASSIST VIEW 

MetaASSIST View is a carrier-class, Java-based graphical 

craft application that provides management of Actelis 

portfolio. MetaASSIST View offers an intuitive Graphical User 

Interface (GUI) for complete Operation, Administration, 

Maintenance and Provisioning (OAM&P) of Actelis systems 

linked to each-other via the High-Speed Link (HSL) bonded 

copper interface. 

Actelis’ MetaASSIST View includes many enhancements far 

beyond conventional craft applications, thereby simplifying 

system installation and management. Features include autodiscovery, 

graphical bandwidth utilization tool, comprehensive 

on-line help, and step-by-step procedures. 

MetaASSIST View communicates with Actelis systems locally or 

remotely through in-band and out of band connection. The 

management of the remote Actelis systems is carried in-band 

via the unit’s WAN interfaces - the high speed bonded 

copper link or fiber link. 

MetaASSIST View provides a convenient hierarchical view of 

a network of interconnected Actelis systems, along with the 

status information for each network element and its interfaces. 

All connected network elements can be simultaneously 

configured and managed. Links to individual views of each 

component of the system gives the user quick and easy access 

to a detailed information. 

MetaASSIST View is easy to install and operate. All actions 

are intuitive and can be activated from the logically 

composed management views, optimized for common 

operations. MetaASSIST View provides secure management 

access via Secure Shell (SSHv2) when connected to a remote 

Actelis system over an insecure IP network (e.g., Internet). 

• Free application provided with all equipment 

• JAVA based Application 

• Intuitive Graphical User Interface (GUI) 

• Simplifies OAM&P: 

• Runs on Windows, Unix and Linux 

• Connects to Actelis portfolio locally (craft) or remotely (IP) 


Kaiserin-Augusta-Allee 8 10553 Berlin Germany 

3+49-(0)30-398981-0 5+49-(0)30-398981-39 

9 sales@denk-stein.com www.denk-stein.com 

Vertrieb und technische Beratung in D-A-CH 

Actelis Networks® is the leading global supplier of Carrier Ethernet over Copper broadband solutions for telecom service providers, enterprises 

and municipalities. Deployed by more than 350 customers worldwide, Actelis is accelerating broadband services to businesses and residential 

subscribers through award-winning products and technologies. All content included in this document is the exclusive property of Actelis 

Networks, Inc., and protected by U.S. and international copyright laws. Specifications are subject to change without notice. Actelis® and Actelis 

Networks® are registered trademarks. EFMplus and MetaASSIST are trademarks of Actelis. Any other trademarks used herein are the 

property of their respective owners. Copyright ©2016 All Rights Reserved. Learn more at www.Actelis.com.

Actelis Networks Produktübersicht (EN)

Create successful ePaper yourself

Delete template?

Save as template?