Actelis Networks Produktübersicht (EN)

REPEATERS – EFM
Repeaters – XR 239 and
PFU 8
Actelis Networks Ethernet First Mile (EFM) repeater products are field proven,
high-performance solutions that enable service providers and enterprises to
extend and expand the delivery of high-bandwidth, high-quality Carrier
Ethernet services.
Actelis’ XR239 extend the reach of EFM services by regenerating the signal
between the carrier’s central office and customer premises. Up to 8 repeater
hops (9 segments) can be supported per link extending Ethernet to more than
100Kft (30Km). Actelis XR239 repeaters are remotely powered by the
Actelis PFU-8 power feeding units and can be used with any Actelis
aggregation ML2300/ML230/ML690 and ML600 EAD/NTU devices.
Integrated advanced trouble shooting, monitoring and remote software
upgrade capabilities allow to significantly simplify installation and lower
maintenance cost.
Actelis XR239 repeaters can support up to 13Mbps per copper pair and are
fully compliant with spectral regulations. The XR239 repeaters can be
installed within existing 239 enclosures (North America standard enclosures
replacing T1s) or within other enclosures to comply with various deployment
scenarios worldwide.
Actelis PFU-8x – 8 copper pairs are supported per PFU that can feed up to
4 repeaters across 4 hops. A link can be dually fed from both sides to
enable an 8 hop repeatered link and a significant enhancement in reach
Highlights:
• Advanced trouble shooting and fault isolation minimizing OpEx and truck
roll
• Simplified installation, including dual site feeding
• Actelis patented Dynamic Spectral Shaping (DSS) algorithms to minimize
interference to other binder service
• T1.417 compliant (tested by Telcordia)
• Expanded Reach and Rate - EFM repeater, up to 13 Mbps per pair, up
to 8 hops (9 segments), beyond 100 kft
• Flexible Enclosures for cabinet, pole and building mounts as well as within
existing T1/E1 enclosures
Copyright 2017 – Actelis Networks All rights reserved Page | 50