How to Get Rid of Slow Printing Speed in Brother Printer?

Getting irritated with the slow printing speed in
Brother Machine? Is it wasting too much time?
Don’t worry as
we have found a solution to this problem.
Follow the given guidelines for better results:

Firstly, check that the back cover of the printer is
closed properly and the duplex tray is firmly
installed.
Examine the print resolution carefully. If the
resolution is higher then it will take higher time
to complete the print job. Change the resolution
or the print if it’s taking a too much time.
If the quite mode is enabled then your printer will
work slowly. By default, it is disabled but to
confirm the same follow the given steps:

Check the front cover of the machine is closed and is
connected to the power cord.
Turn on the printer and wait until it is in the Ready
Mode.
Go to the General Setup with the help of the up and
down keys.
Next, click OK and navigate to the Quite Mode option.
Select OK button and then turn off the Quite Mode.
Again, click OK.

Always use the branded ink cartridges,
Brother ink cartridges are recommended in
this case as choosing the local or duplicate
one may damage your printing machine.
Ensure that your internet speed is fast
enough to print the desired documents if
using a wireless printer. You can use an
Ethernet cable or install the printer near the
Wi-Fi router to avoid such problems.

Incorrect configuration of the Brother
machine driver can also be the reason of slow
printouts.
Uninstall the old version and reinstall the
latest driver according to the model of your
printer.

So, these were the common troubleshooting
tips to rectify this issue. If the problem
persists again, don’t worry, just make a call at
our toll-free number Brother Printer Support
Canada Number 1-844-888-3870 and get in
contact with our technicians to get an instant
remedy.

The technicians of this team are tremendously
experienced and hence can solve your issues
in a short timeframe.
Original Content Source