Brother Printer Support Helps In Removing “Media Error” On The LCD

Brother Printer Support Helps In Removing
“Media Error” On The LCD
The message “Media Error” appears on the display mainly when the memory card is corrupted,
wrongly formated or some another problem with the card. You must remember these things
The Digital Print Order Format fle must be in proper format for the memory card.
File extension must be .JPG and make sure that the camera records images are in .JPG
format.
If you have checked all the above points and meetng the above requirements but stll you get
“Media Error” message then follow the given instructons
1. Withdraw the memory card from the media drive/slot.
2. Check the card for any scratches, cracks or any other form of damage etc.
3. Make sure that the memory card is working properly by checking it again into the
camera or video device.
4. If it works properly with your video or camera device then follow the further steps. And,
if you cannot view the image using the device then memory card need to be replaced.
5. Now, inspect the media slot by insertng it into a various memory card that you know is
in working mode. If the problem is stll the same, then withdraw the slot and move to
next step.
6. Remove the power cable of the Brother Printer from the switch and then re-plug it afer
1 minute.
7. Reinsert the drive in the correct slot and check if the problem is resolved.

Within few clicks, visit our website and know the troubleshootng techniques to the basic errors
which you can solve yourself at home by just following the instructons given on our website.
For additonal help, contact Brother Printer support 1-855-253-4222 and talk to our experts.
We are always happy to help our clients at any tme and provide proper printng soluton. For
further details, visit our website and avail live chat support to clean any doubt.
Source: