2018 Seed Catalog
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
This system allows the plastic to<br />
inflate at the point of penetration:<br />
by the air inlet hose. The intake<br />
hose/tube assembly will adjust<br />
automatically to allow the plastic to<br />
inflate to a 10” air space.<br />
System benefits:<br />
• Condensation between the layers<br />
of plastic is reduced bringing in the<br />
humid air from the outside<br />
• Exhaust fans no longer compete for the blower and draw the inflation<br />
out of the plastic<br />
• Inside condensation is reduced because, with the plastic consistently<br />
inflated, the colder layer is kept away from the warmer inside layer<br />
• Inflation system includes: 115 volt .60CFM blower, blower bracket kit,<br />
18” intake hose, intake tube assembly, and air regulator<br />
Drop Ship Charge $10<br />
<strong>Catalog</strong> # Each<br />
Outside Air Inflation System 26-70060 $ 240.00<br />
Retrofit Outside Air Kit 26-70020 91.50<br />
For use in connecting double<br />
layer polyethylene from roof to<br />
side wall to allow pressurized<br />
air in both locations. 24” long.<br />
26-70050 $ 24.40<br />
This is a non-woven, polyester tape<br />
that protects and extends the life of<br />
your greenhouse covering. Apply to<br />
greenhouse frame any place<br />
where poly film contacts, and<br />
breakdown at the frame is virtually<br />
eliminated.<br />
Roll is 40’ long and 1 1 ⁄2” wide.<br />
Polyethelene Film Accessories<br />
Adjustable Blower - Model B60<br />
This blower is used to inflate two<br />
layers of polyethylene greenhouse<br />
covering. Can provide heat savings<br />
of up to 40% This blower has<br />
automatic-reset thermal protection<br />
which shuts off the motor should<br />
excessive temperatures develop.<br />
Adjustable air inlet damper included.<br />
115-Volt — Amps 60 CFM<br />
Price per Each<br />
<strong>Catalog</strong> # 1 - 5 6 & up<br />
26-70000 $ 88.50 $ 82.04<br />
Adjustable Blower<br />
Mounting Kit<br />
Designed to be used with the above<br />
adjustable blower. Made of heavyweight<br />
alum inum, complete with bolts, nuts,<br />
washers and installation instructions.<br />
<strong>Catalog</strong> # Each<br />
26-70030 $ 33.50<br />
Self Adjusting Outside Air<br />
Inflation System<br />
Flexible Jumper<br />
Pak Gard Insulator Tape<br />
Price per Each<br />
<strong>Catalog</strong> # 1 - 11 12 & up<br />
26-61680 $ 18.20 $ 16.56<br />
Dura Tape - Poly Patch<br />
A linered greenhouse<br />
patch tape combining<br />
a clear UV-resistant<br />
film with an aggressive<br />
acrylic adhesive<br />
designed to adhere<br />
to most commercial<br />
greenhouse film.<br />
Resistant to water and<br />
temperature extremes.<br />
Will not break down<br />
after extended outdoor<br />
exposure.<br />
Poly Inflation Controller<br />
Lasts up to 2 years<br />
• Regulates airflow for<br />
twin-film greenhouse<br />
blowers to maintain<br />
pressure between<br />
the film layers<br />
• Helps prevent<br />
damage by over<br />
or under inflation<br />
• Offers more<br />
stability in<br />
windy environments<br />
• Features a built in digital manometer<br />
• Offers local humidity and temperature data on the display<br />
Saves energy by maintaining<br />
pressure between films<br />
• Has a remote temperature sensor located in the inlet air intake<br />
• This unit can be set to run in manual mode to hold a specified<br />
pressure setting or auto mode to adjust pressure based on<br />
temperature and wind gusts<br />
Woven Web Tape<br />
(Hold Down Tape)<br />
Price per Each<br />
Size <strong>Catalog</strong> # 1-53 54 & up<br />
2” x 48’ 26-61230 $ 11.00 $ 9.79<br />
1-26 27 & up<br />
4” x 48’ 26-61240 22.05 19.62<br />
1-17 18 & up<br />
6” x 48’ 26-61260 33.10 29.46<br />
1-11 12 & up<br />
10” x 48’ 26-61290 55.00 48.95<br />
<strong>Catalog</strong> # Each<br />
Poly Inflation Controller 26-70120 $ 480.00<br />
Durable, U.V. stabilized, black woven<br />
polypropylene fabric tape used to hold<br />
down poly film on greenhouses, cutting<br />
down on the noise factor and protecting<br />
the film against tearing. Also used to<br />
Price per Each<br />
reinforce edges and seams of fabric.<br />
Size Case <strong>Catalog</strong> # 1-23 24 & up<br />
1-3/4” x 300’ 24 27-80190 $ 20.45 $ 19.43<br />
2-3/4” x 300’ 16 27-80170 26.90 24.21<br />
White Vinyl Batten Tape<br />
Used for stapling poly film to a wood frame. Just<br />
position film over frame tape over film, and then<br />
staple every 4”.<br />
Price per Each<br />
Size <strong>Catalog</strong> # 1-3 4 & up<br />
3/4” x 500’ 26-60050 $ 47.80 $ 44.36<br />
800-383-0865 • Hummert <strong>Seed</strong> & Supply • St. Joseph, MO • Fax: 816-232-6134<br />
124
Change language