GME Supply Product Catalog Version 18.1
GME Supply is North America's premier outfitter of fall protection, safety equipment, and gear for at-height workers, industry, and construction.
GME Supply is North America's premier outfitter of fall protection, safety equipment, and gear for at-height workers, industry, and construction.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PETZL ASAP MOBILE FALL ARRESTER<br />
3/8” - 7/16” (10 - 12 mm) rope diameter. Arrests falls, slides, and uncontrolled<br />
descents. Works on vertical or angled rope. Locks on the rope even if grabbed during<br />
the fall. Moves up or down the rope without any manual manipulation of the device.<br />
Easy to install and remove at any point on the rope. May be combined with an<br />
ASAP’Sorber or Absorbica energy absorbing lanyard to work at a distance from the<br />
rope. Comes with an OK Triact-Lock automatic locking carabiner. Weight capacities:<br />
220 lbs without energy absorber, 308 lbs with ASAP’Sorber, 551 lbs with Absorbica.<br />
B71AAA - $249.95<br />
PETZL ASAP LOCK MOBILE FALL ARRESTER<br />
3/8” - 1/2” (10 - 13 mm) rope diameter. Integrated locking function allows the user to immobilize<br />
the device to reduce the length of a fall. In case of a strong wind, this function also prevents the<br />
rope from being blown upward. Arrests falls, slides, and uncontrolled descents. Works on vertical or<br />
angled rope. Locks on the rope even if grabbed during the fall. Moves up or down the rope without any<br />
manual manipulation. Easy to install and remove at any point on the rope. Connection arm makes the<br />
system loss-resistant when passing intermediate anchors. May be combined with an ASAP’Sorber or<br />
Absorbica energy absorbing lanyard to work at a distance from the rope. Weight capacities: 308 lbs<br />
with ASAP’Sorber, 551 lbs with Absorbica.<br />
B71ALU - $279.95<br />
ROPE & RESCUE // ROPE GRABS & ASCENDERS<br />
PETZL JANE ROPE<br />
LANYARD<br />
Can be combined with an Absorbica<br />
energy absorber to set up an energyabsorbing<br />
I or Y lanyard with a maximum<br />
length of 2 m. Sewn ends protected by<br />
plastic sheath to hold the connector in<br />
place and protect the ends from abrasion.<br />
May be used with an MGO Open 60<br />
connector with very large gate opening<br />
for connection to metal structures or to<br />
large-diameter cables and bars.<br />
L50 60 60 cm - $29.95<br />
L50 100 100 cm - $31.95<br />
L50 150 150 cm - $34.95<br />
PETZL ASAP’SORBER<br />
LANYARD WITH ENERGY<br />
ABSORBER<br />
Connects the ASAP or ASAP Lock mobile fall<br />
arrester to the harness. Allows the user to<br />
distance themself from the rope in order to<br />
declutter the work area and protect the rope.<br />
Absorbs the energy of a fall by the tearing of<br />
specific stitching. Available in (2) lengths for a<br />
choice of the best balance between distance<br />
from the rope and reducing the fall length.<br />
308 lbs weight capacity. Lacks sufficient<br />
energy absorption to safely arrest the<br />
potential energy during a two-person rescue.<br />
L71AA 20 20 cm - $42.95<br />
L71 AA 40 40 cm - $50.95<br />
PETZL ABSORBICA<br />
Tear-webbing energy absorber, for use<br />
in combination with a Jane rope lanyard<br />
to make an energy-absorbing lanyard.<br />
Maximum length of two meters. Ends<br />
equipped with string to hold the connector<br />
in position and protect the sling from<br />
abrasion. Compact and lightweight. 551<br />
lbs weight capacity. If using the ASAP<br />
or ASAP Lock in two-person rescue<br />
technique, an Absorbica must be used as<br />
an energy absorber. Lacks sufficient energy<br />
absorption to safely arrest the potential<br />
energy during a two-person rescue.<br />
L57 - $59.95<br />
KONG 802<br />
BACK-UP<br />
MOBILE FALL<br />
ARRESTER<br />
3/8” - 7/16” (10 - 12)<br />
mm rope diameter.<br />
Works on vertical or angled<br />
rope. Moves up or down<br />
along the rope without<br />
manual intervention. Easy<br />
to install and remove at<br />
any point on the rope. For<br />
rope access applications<br />
unit can be used with tug<br />
cord. Non-aggressive cam<br />
design. One person weight<br />
capacity: 220 lbs.<br />
8021NO400KK -<br />
$149.99<br />
TUF-TUG<br />
ALUMINUM<br />
KERNMANTLE<br />
ROPE GRAB<br />
1/2” - 5/8” (13 - 16 mm)<br />
rope diameter. Dual cams<br />
for double safety. Patented<br />
design pivots open for<br />
easy attachment<br />
anywhere<br />
on lifeline.<br />
Automatically<br />
travels up<br />
with user on<br />
pre-tensioned<br />
lifeline. Incorporates springloaded<br />
cams to hold rope grab<br />
in parked position.<br />
5000-IE-AL-KM - $89.99<br />
MIO ROPE GRAB<br />
1/2” (13 mm) rope<br />
diameter. Stainless steel selftrailing<br />
rope grab. Removable<br />
dual action pin for easy<br />
placement. Grips automatically<br />
in the event of a fall and<br />
dissipates the energy of the<br />
fall by slipping along the rope.<br />
Comes with lanyard and ANSI<br />
snaphook.<br />
HD26005 1/2” rope -<br />
$175.00<br />
HD26006 5/8” rope -<br />
$160.00<br />
HD26114 7/16” rope -<br />
$160.00<br />
(800) 940-6762<br />
81