2018 Components Catalog

JDS Sandcarving Industries, Materials Inc. & Supplies
Ikonics Imaging ® Sandcarving Supplies
JDS Industries, Inc.
Stocked in all 14 JDS Locations!
made in the
USA
JDS Industries, Inc.
C
Sandcarving Materials & Supplies
R3 (3 mil.) and R5 (5 mil.) photoresist films
make decorative sandcarving simple, productive
and enjoyable. R3 and R5 are engineered for
professional sandcarving applications in which quick
processing and high production are critical. These
photoresist films promote efficient mask production by
eliminating the time consuming and messy application
of adhesive.
R3 & R5 have an inherent adhesive that does not
activate until the films are washed out. Even when the
adhesive is active, these films do not feel “sticky." This
quality makes these films repositionable until firmly
applied to a substrate. The formulation of these films
allow the achievement of fine-line resolution needed
for high-detailed sandcarving masks. These films are
constructed with excellent durability allowing deeper
carving. Remove R3 and R5 with water, or by
simply peeling it off the substrate.
R3 & R5 Art Specifications*
Size:
Typically, artwork should not exceed
photoresist sheet or roll size
Resolution: Minimum line resolution
3 mil. film: 3 mil. (requires minimum 180 grit
and positive film density of 3.0)
5 mil. film: 5 mil. (requires minimum 180 grit
and positive film density of 3.0)
* These specifications are based on using a genuine
film positive and a high pressure washing system
R3 Self-Adhesive Photoresist Film
3 mil. thickness
R3310X1210SHT
10 Sheet Pack
Sheet Size: 10" x 12"
R3310X1225SHT
25 Sheet Pack
Sheet Size: 10" x 12"
R3310X25ROLL
25' Roll
Roll Size: 10" x 25'
R3310X100ROLL
100' Roll
Roll Size: 10" x 100'
R5 Self-Adhesive Photoresist Film
5 mil. thickness
R3314X25ROLL
25' Roll
Roll Size: 14" x 25'
R3314X100ROLL
100' Roll
Roll Size: 14" x 100'
– Sheets Sold in full packs only –
R5510X1210SHT
10 Sheet Pack
Sheet Size: 10" x 12"
R5510X1225SHT
25 Sheet Pack
Sheet Size: 10" x 12"
R5510X25ROLL
25' Roll
Roll Size: 10" x 25'
R5514X25ROLL
25' Roll
Roll Size: 14" x 25'
IKONICS Imaging ® silicone-coated release paper
is used to protect the adhesive side in any selfadhesive
photoresist films. Silicone release paper
is coated on one side which is the key component
in storage of self-adhesive film, preserving the
adhesive and protecting the film from dust and other
air borne materials. Silicone one-sided release liner
is the backbone of the pressure sensitive adhesive
and tacky adhesive photoresist films.
UltraPro Release Paper
UPRELEASE11X14
50 Sheet Pack
Sheet Size: 11" x 14"
UPRELEASE10X100
100' Roll
Roll Size: 10" x 100'
UPRELEASE14X100
100' Roll
Roll Size: 14" x 100'
– Sheets Sold in full packs only –
349 Your Recognition & Personalization Partner