2018 Components Catalog

JDS Sandcarving Industries, Materials Inc. & Supplies
Ikonics Imaging ® Sandcarving Supplies
JDS Industries, Inc.
Stocked in all 14 JDS Locations!
made in the
USA
JDS Industries, Inc.
C
TRIGGERJET
The TriggerJet Washout Nozzle provides a unique, low-cost opportunity
for photoresist film users to effectively develop their images after UV
exposure. This hand spray-gun delivers a stream of washout power equal
to that of more expensive nozzles. The trigger lock allows a continuous
flow of water for convenient operation. You can simulate the equivalent of
approximately 150 psi with this unit of polypropylene built for long lasting
operation. With gentle side-to-side sweeping motions, the photoresist
film products can be developed to yield satisfying image washout for all
low to medium volume requirements.
TriggerJet Features
• Low cost
• Adjustable spray nozzle
• Attaches easily to a common garden hose
TriggerJet Specifications
Maximum pressure: 150 psi (10bar)
Maximum water temperature: 140º F (60º C)
Nozzle: Molded polypropylene (fan spray)
Capacity: .9 gpm (3.4 liters/min.)
Length: 9.5 inches (24.1 centimeters)
Weight: 6 oz. (170 grams)
Sandcarving Materials & Supplies
SQUEEGEE
IKONICS Imaging ® Squeegee
PBSPRAYNOZZLE
Case Qty: 1
BATSQUEEGEE
Case Qty: 1
WIRE WHEEL
The wire wheel is used to perforate the membrane on washout
photo resist films after the mask has been applied. It helps to
remove any trapped air in between the membrane and substrate.
PBWIREWHEEL
Case Qty: 1
353 Your Recognition & Personalization Partner