GME Supply Product Catalog Version 16.2

CADWELD PLUS ELECTRONIC EXOTHERMIC WELDING DELUXE KIT
PLUSCU Cadweld electronic control unit, L160 standard handle with flint igniter, B160V chain handle with flint igniter, #45 case weld
metal (20 shots), (2) #65 cases weld metal (40 shots), #90 case weld metal (10 shots), PTC-1T1T 2 solid parallel splice mold, TAC-1T1T
solid “T” mold, LJC-EG1T 2 solid bus bar mold, GTC-161T 2 solid through 5/8” ground rod mold, VSC-1T-V3C 2 solid vertical down from
pipe mold, VFC-1T-V3C 2 solid vertical up from pipe mold, HAA-1T solid horizontal to flat steel mold, T394 mold cleaning brush, T403
mold sealer.
ER-8075 - $1,168.99
MOLD SEALER
Ideal for sealing hot or cold molds to retard leakage.
T403 - $19.99
Electronic Igniter
Initiates the reaction of the metal crucible, includes
a 6’ lead that attaches to the ignition strip and 8 AA batteries.
PLUSCU - $133.99
GROUNDING // CADWELD
HANDLE CLAMP
Used for most molds, includes flint igniter. Offset handle
reduces labor time and can fit in a smaller hole.
L160 - $57.99
CADWELD EXOTHERMIC WELDING DELUXE KIT
L160 standard handle with flint igniter, B160V chain handle with flint igniter, #45 case weld metal (20 shots), (2) #65 cases weld metal
(40 shots), #90 case weld metal (10 shots), PTC-1T1T 2 solid parallel splice mold, TAC-1T1T solid “T” mold, LJC-EG1T 2 solid bus bar
mold, GTC-161T 2 solid through 5/8” ground rod mold, VSC-1T-V3C 2 solid vertical down from pipe mold, VFC-1T-V3C 2 solid vertical up
from pipe mold, HAA-1T solid horizontal to flat steel mold, T394 mold cleaning brush, T403 mold sealer.
ER-8051 - $999.99
CHAIN HANDLE CLAMP
Secure molds to vertical pipe, 20” chain for pipes up to 4”,
includes flint igniter, can be used with or without chain.
B160V - $114.99
B-158 20” extension chain - $16.35
FLINT IGNITER
Available separately, but included with each handle clamp.
T320 - $6.99
T320A Replacement flints (10pk) - $5.95
CADWELD 8025
WELDING STARTER KIT
L160 EZ-change 3” handle clamp, PTC-1T1T solid parallel splice
mold, TAC-1T1T solid “T” mold, LJC-EG1T solid bus bar mold,
GTC-161T solid through 5/8” ground rod mold, #45 case weld
metal (20 shots), #65 cases weld metal (40 shots), #90 case weld
metal (10 shots), T394 mold cleaning brush, T403 mold sealer.
ER-8025 - $649.99
CADWELD 8035
WELDING STARTER KIT
B160V chain handle with flint igniter, VSC-1T-V3C solid
vertical down from pipe mold, VFC-1T-V3C solid vertical
up from pipe mold, #45 case weld metal (20 shots), #65
cases weld metal (40 shots), HAA-1T solid horizontal to flat
steel mold, T394 mold cleaning brush, T403 mold sealer.
ER-8035 - $519.99
ADAPTER SLEEVES
Changes 2 stranded molds to 6 stranded, 25pk.
B112 - $6.99
B140A Wrap sleeves (50pk) - $17.95
ERICO is the pioneer of the CADWELD Exothermic Welding Process for permanent Cathodic Protection connections. Specifying the
CADWELD process in your construction plans will dramatically extend the lifespan of infrastructure systems. CADWELD connections
are made with a semi-permanent graphite mold, which holds the conductors to be welded. Weld metal (a mixture of copper oxide and
aluminum) is dumped into the top of the mold. The mold is covered and the weld metal ignited. The exothermic reaction produces
molten copper, which results in a permanent, high conductivity connection. A CADWELD Connection has current carrying capacity
equal to that of the conductor, is permanent with a low resistance connection that cannot loosen or corrode, uses lightweight,
inexpensive equipment, requires no external source of power or heat, and can be easily checked for quality.
MOLD CLEANING BRUSH
Useful in removing slag from molds, especially vertically split.
T394 - $7.79
(800) 940-6762
145