GME Supply Product Catalog Version 16.2

PETZL ABSORBICA
Tear-webbing energy absorber, for use
in combination with a JANE lanyard to
make an energy-absorbing lanyard;
maximum length of two meters; ends
equipped with STRING to hold the connector
in position and protect the sling
from abrasion; compact and lightweight.
L57 - $58.95
PETZL ASAP’SORBER
LANYARD WITH
ENERGY ABSORBER
Connects the ASAP or ASAP LOCK mobile
fall arrester to the harness, allows the
user to distance himself from the rope
in order to declutter the work area and
protect the rope from sharp tools and
molten metal splash, absorbs the energy
of a fall by the tearing of specific stitching,
available in (2) lengths for a choice of
the best balance between distance from
the rope and reducing the fall length.
L71AA 20 20 cm - $40.95
L71 AA 40 40 cm - $50.95
PETZL ASAP MOBILE FALL ARRESTER
Arrests falls, slides, and uncontrolled descents; works on vertical
or angled rope, locks on the rope even if grabbed during the fall,
moves up or down the rope without any manual manipulation of
the device, easy to install and remove at any point on the rope,
may be combined with an ASAP’SORBER energy absorbing lanyard
to work at a distance from the rope, comes with an OK TRIACT-
LOCK automatic locking carabiner.
B71AAA - $230.00
PETZL ASAP LOCK
MOBILE FALL ARRESTER
Integrated locking function allows the user to
immobilize the device to reduce the length of a
fall. In case of a strong wind, this function also
prevents the rope from being blown upward.
Arrests falls, slides, and uncontrolled descents;
works on vertical or angled rope, locks on the
rope even if grabbed during the fall, moves up
or down the rope without any manual manipulation,
easy to install and remove at any point
on the rope, connection arm makes the system
loss-resistant when passing intermediate
anchors, is used with an ASAP’SORBER energy
absorbing lanyard to work at a distance.
B71ALU - $265.00
ROPE & RESCUE // ROPE GRABS & ASCENDERS
KONG BACK-UP
MOBILE FALL
ARRESTER
Supports fall factor 2 falls in
a semi-dynamic way, without
damage to the safety rope;
works on vertical or angled
rope; moves up or down along
the rope without manual
intervention; easy to install and
remove at any point on the rope;
for rope access applications unit
can be used with tug cord; 10.0
to 12.0 mm semi-static ropes
(EN 1891 type A) certified with
the device.
802 - $147.99
DBI SALA
ROPE-SAFE
MOBILE/STATIC
ROPE GRAB WITH
ATTACHED EZ-STOP
Easy to use automatic to manual
operation switch; integrated tow cord;
built-in swivel; swivel cover; built-in
anti-panic grip; triple action aluminum
carabiner; (2) person rescue
load rated up to 440 lbs;
for use with 27/64 in. to
1/2 in. (10.5 - 13.0 mm)
kernmantle rope; 1’
integral energy absorbing lanyard.
8700620 1’ lanyard - $379.99
8700643 2’ laynard - $379.99
8700621 3’ lanyard - $379.99
MIO ROPE GRAB
Stainless steel self-trailing rope grab,
removable dual action pin for easy
placement, grips automatically in the
event of a fall and dissipates the energy
of the fall by slipping along the
rope, comes with lanyard and ANSI
snaphook, for use with 1/2” rope.
RG1200 1/2” rope - $160.00
RG5834 5/8” rope - $160.00
RG716 7/16” rope - $160.00
(800) 940-6762
61