surface pretreatment by phosphate conversion coatings – a review

172 T.S.N. Sankara Narayanan
[165] T.S.N. Sankara Narayanan and
M. Subbaiyan // Trans. Met. Finish. Assoc.
India 1 (1992) 9.
[166] T.S.N. Sankara Narayanan // Met. Finish. 91
(1993) 57.
[167] T.S.N. Sankara Narayanan // Plat. Surf.
Finish. 83 (1996) 69.
[168] T.S.N. Sankara Narayanan //Prod.
Finish.(London), 48(4) (1995) 16.
[169] T.S.N. Sankara Narayanan // Prod. Finish.
(London) 49(2) (1996) 31.
[170] T.S.N. Sankara Narayanan // Prod. Finish.
(London) 50(10) (1997) 4.
[171] Samuel Spring, Metal Cleaning (Reinhold
Publishing Corporation, New York, 1963).
[172] William P. Kripps, In: Metals Handbook
(American Society of Materials, Ohio,
1987), Vol. 13, 9 th Edition, p. 380.
[173] A.J. Leibman, In: Steel Structures Painting
Manual, ed. by J. Bigos (Steel Structures
Painting Council, Pittsburgh, 1954), Vol.1,
p. 6.
[174] A.G. Roberts, Organic Coatings, Properties,
Selection and Use (U.S. Dept. of
Commerce, NB of Standards, 1968), p. 105.
[175] M. Straschill, Modern Practice in the
Pickling of Metals (Robert Draper,
Teddington, Middlesex, England, 1968).
[176] W. Bullough // Metallurgical Reviews 2
(1957) 391.
[177] J.F. Andrew and P.D. Donovan // Trans. Inst.
Met. Finish. 48 (1970) 152; 49 (1971) 162.
[178] R.D. Wyvill and T. Cape // Prod. Finish.
(Cincinnati) 52(1) (1987) 68.
[179] S. Sankara Pandian and S. Guruviah // Met.
Finish. 88(2) (1990) 73.
[180] A. Zavarella, U.S. Patent 2,476,345 (1949).
[181] M. Green, US Patent 2086712 (1937); US
Patent 2082950 (1937).
[182] F.P. Spruance Jr., U.S. Patent, 2,438,877
(1948).
[183] V.S. Lapatukhin, Phosphating of Metals
(Mashgiz, Moscow, 1958).
[184] R.D. Wyvill // Prod. Finish. (Cincinnati) 49(2)
(1984) 50.
[185] R. Murakami, H. Shimizu, T. Yoshii,
M. Ishida and H. Yonekura, U.S. Patent
4,419,147 (1983).
[186] H.L. Pinkerton, In: Electroplating Engineering
Handbook (Reinhold Publishing
Corporation, New York, 1962), p. 705.
[187] S. Maeda and M.Yamamoto // Prog. Org.
Coat. 33 (1998) 83.
[188] Samuel Spring, Preparation of Metals for
Painting (Reinhold Publishing Corporation,
New York, 1965), p. 204.
[189] G.D. Cheever // J. Paint Technol. 39(504)
(1967) 1.
[190] R.P. Wenz and J.J. Claus // Mater. Perform.
(12) (1981) 7.
[191] T.S.N. Sankara Narayanan // Prod. Finish.
(London) 50(4) (1997) 18.
[192] A. Neuhaus and M. Gebhardt // Werkstoff
und Korrosion 17 (1966) 493.
[193] A. Neuhaus, E. Jumpertz and M. Gebhardt
// Korros. 16 (1963) 155.
[194] P. Chamberlain and S. Eisler // Met. Finish.
50(6) (1952) 113.
[195] G.D. Cheever, SAE Technical paper No.
700460 (1970).
[196] W. Machu, In: Interface Conversion for
Polymer Coatings, ed. by P. Weiss and
G.D. Cheever (American Elsevier Publishing
Company Inc., New York, 1968), p.128.
[197] T.S.N. Sankara Narayanan and
M. Subbaiyan, In: Proceedings of the
National Conference on Modern Analytical
Techniques in Materials Science (Indian
Society for Analytical Scientists, Mumbai,
1991), p. 15.
[198] G.D. Cheever, In: Interface Conversion for
Polymer Coatings, ed. by P. Weiss and
G.D. Cheever (American Elsevier Publishing
Co. Inc., New York, 1968), p. 150.
[199] T. Miyawaki, H. Okita, S. Umehara and
M. Okabe, In: Proceedings of the conference
on Interfinish ‘80 (Kyoto, 1980).
[200] M.O.W. Richardson, D.B. Freeman,
K. Brown and N. Djaroud // Trans. Inst. Met.
Finish. 61 (1983) 183.
[201] F. Kaysser // Galvanotechnik (Saulgau)
63(11) (1972) 11.
[202] G.D. Cheever // J.Coat Technol. 50 (1978)
78.
[203] G.D. Cheever // Am. Paint Coat. J. 62(14)
(1977) 64.
[204] Tony Mansour // Mater. Eval. 41 (1983) 302.
[205] C. T. Yap, T. L. Tan, L. M. Gan and H. W. K.
Ong // Appl. Surf. Sci. 27 (1986) 247.
[206] T.S.N. Sankara Narayanan and M.
Subbaiyan // Prod. Finish. (London) 45(9)
(1993) 7.
[207] V. Hospadaruk, J. Huff, R.W. Zurilla and H.T.
Greenwood, National SAE meeting (Detroit,
March, 1978), Paper No. 780186