SOLID SURFACE SINKS CATALOGUE
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Physical Properties<br />
Feature Unit Result Test Take Over Explanation<br />
Specific Weight / Density<br />
g/cm<br />
1.70 - 1.78<br />
DIN ISO 1183<br />
Instron<br />
Tensile Strength<br />
psi<br />
5.400<br />
ASTM D 638<br />
Instron<br />
Strain Modulus<br />
psi<br />
1.4 x 10<br />
ASTM D 638<br />
Instron<br />
Elongation at Break<br />
% min.<br />
0.85 - 1.15<br />
ASTM D 638 / DIN EN ISO 178<br />
Instron<br />
Flexural strength<br />
mpA<br />
70 - 92<br />
ASTM D 790 / DIN EN ISO 178<br />
M Commensurable<br />
Flexural Modulus<br />
MPa<br />
8.400 - 10.500<br />
ASTM D 790 / DIN EN ISO 178<br />
Hardness (Rockwell)<br />
hrm<br />
87 - 94<br />
ASTM D 785, M Skalası<br />
Thermal Expansion<br />
mm/m.C<br />
3.04 x 10<br />
ASTM D 696<br />
Dry Heat Resistance<br />
Passing, 4 - Slight Change<br />
ISO 19712-2, Chapter 12<br />
Gloss 60 Degrees<br />
5.20<br />
ANS Z 124<br />
Color Durability<br />
No Change<br />
NEMA LD 3<br />
Fading Test<br />
5, No Change<br />
ISO 19712-2, Bölüm 9, Metod A<br />
Wear & Cleanability<br />
Passing<br />
ANS Z 124<br />
Boiling Water Surface Resistance<br />
No Change<br />
NEMA LD 3<br />
High Temperature Resistance<br />
No Change<br />
NEMA LD 3<br />
Dry Heat Resistance<br />
Geçer, 4 - Slight Change<br />
ISO 19712-2, Chapter 12<br />
Stain Retention<br />
Passing<br />
NEMA LD 3<br />
Stain Resistance<br />
Geçer, 4 - Slight Change<br />
ISO 19712-2 Bölüm 10.1 Metod A<br />
Impact Resistance<br />
No Fracture<br />
NEMA LD 3<br />
Impact Resistance (Large Diameter Ball)<br />
No Fracture<br />
ISO 19712-2 Chapter 8<br />
IZOD Impact Strength<br />
Ft.Ib/in<br />
0.28<br />
ASTM D 256<br />
Water Absorption<br />
% Maks.<br />
0.03<br />
ASTM D 570<br />
Fungi and Bacteria<br />
Yok<br />
ANS Z 124<br />
Resistance to Weather Conditions<br />
No Change<br />
ASTM D 1499<br />
Reaction Against Fire<br />
B-sl, d0<br />
EN 13501-1<br />
1000 Saat<br />
Feature Unit Result Test Take Over<br />
Density<br />
g/cm³<br />
1.70 - 1.78<br />
DIN ISO 1183<br />
Bending Modulus<br />
MPa<br />
8.400 - 9220<br />
DIN EN ISO 178<br />
Bending Strength<br />
MPa<br />
57.1 - 74.0<br />
DIN EN ISO 178<br />
Fracture Point Extension<br />
%<br />
0.76 - 0.93<br />
DIN EN ISO 178<br />
Compressive Strength<br />
MPa<br />
175 - 178<br />
EN ISO 604<br />
Impact Resistance (Spring Load)<br />
N<br />
≥ 25<br />
DIN ISO 4586T11<br />
Impact Resistance (Ball Drop)<br />
Cm<br />
≥ 120<br />
DIN ISO 4586T12<br />
Surface Hardness (Mohs Index)<br />
2 - 3<br />
DIN EN 101<br />
Resistance to Surface Wear<br />
Mm3/10 Rev<br />
58 - 63<br />
DIN ISO 4586T6<br />
Resistance to Boiling Water - Weight Increase<br />
%<br />
0.1.0.3<br />
DIN ISO 4586T7<br />
Resistance to Boiling Water - Surface Increase<br />
No Visible Changes<br />
DIN ISO 4586T7<br />
Dimensional Stability at 20 ºC<br />
% Length Change<br />
0.16 ≤<br />
DIN ISO 4586T10<br />
Resistance to Heat 180 °C<br />
4 - Small Change<br />
DIN ISO 4586T8<br />
Light Disease (Xenon Arc)<br />
Blue Wool Ölçeği<br />
≤ 6<br />
DIN ISO 4586T16<br />
Resistance to Slide with 100um<br />
̊ Pain<br />
5.8 ° - Passable R9 Conditioned (6 ° Mim)<br />
DIN 51130:1992-11<br />
Resistance to Slide with 120um<br />
̊ Pain<br />
7.6 ° - not passable R9 Conditioned (6 ° Mim)<br />
DIN 51130:1992-11<br />
Resistance to Slide with 150um<br />
̊ Pain<br />
8.1 ° - not passable R9 Conditioned (6 ° Mim)<br />
DIN 51130:1992-11<br />
Bacteria and Fungi Resistance<br />
Germs Will Not Permit Uremes<br />
DIN EN ISO 846<br />
Electrostatic Surface Behavior<br />
Ω<br />
1x10<br />
DIN IEN 61 340-4-1<br />
96
Change language