Characteristic values and technical data of ... - vernier sales, inc.

22
Characteristic values and technical data of probes to measure the
Note regarding probe designations:
L: cable length for magnetic induction probes 5 m
and for eddy current probes 3 m instead of 1.5 m.
F: Measuring element protected against moist,
aggressive media.
T: Intermittent measurements on specimens with
temperatures up to 100 ºC (212 ºF) possible.
* Note: Probe capability (accuracy and precision)
tested under controlled conditions.
Description
Order Number
Measurement
range
ES1A (1)
602-222
0.5 - 108 % IACS
0.3 - 63 MS/m
ESW1A (1)
602-389
0.5 - 108 % IACS
0.3 - 63 MS/m
ES2
602-223
0.5 - 108 % IACS
0.3 - 63 MS/m
S1A (2)
601-568
0.5 - 108% IACS
0.3 - 63 MS/m
SW1A (2)
601-615
0.5 - 108% IACS
0.3 - 63 MS/m
S2 (3)
601-569
0.5 - 108% IACS
0.3 - 63 MS/m
ES4B (4)
602-539
ES40 (5)
603-235
0,5-108 % IACS
0,3-63 MS/m
Measurement
accuracy*
u s
Measurement
precision*
s
0.3 %
of measured value
0.01 % IACS or
0.03 % of measured value
0.3 %
of measured value
0.01 % IACS or
0.03 % of measured value
0.5 %
of measured value
0.0 1% IACS or
0.05 % of measured value
0.3 %
of measured value
0.01 % IACS or
0.03 % of measured value
0.3 %
of measured value
0.01 % IACS or
0.03 % of measured value
0.5 %
of measured value
0.01 % IACS or
0.05 % of measured value
0,3 %
of measured value
0,01 % IACS or
0,03 % of measured value
(1) : Probe can only be connected to FISCHERSCOPE ® MMS ® module SIGMASCOPE ® and module DUPLEX
(2) : Probe can only be connected to SIGMASCOPE ® SMP1B
(3) : Probe can only be connected to SIGMASCOPE ® SMP2
(4) : Probe can only be connected to FISCHERSCOPE ® MMS ® EURO HF
Probe
Coating
ø
h
Measurement point
0 - 700 µm (28 mils)
50 mm (200 mils)
2 mm (80 mils)
0 - 700 µm (28 mils)
50 mm (200 mils)
2 mm (80 mils)
Lift-off h
Ø for 10% error
min. Ø
0 - 500 µm (20 mils)
36 mm (1400 mils)
2 mm (80 mils)
0 - 700 µm (28 mils)
50 mm (200 mils)
2 mm (80 mils)
0 - 700 µm (28 mils)
50 mm (200 mils)
2 mm (80 mils)
0 - 500 µm (20 mils)
36 mm (1400 mils)
2 mm (80 mils)
0 - 500 µm (20 mils)
30 mm (1.2“)
1 mm (40 mils)