Characteristic values and technical data of ... - vernier sales, inc.

Test Instruments
A series of hand-held and bench top instruments are available for the probes
listed. For magnetic induction based measurement the DELTASCOPE ®
MPxC series is used, the ISOSCOPE ® MP series is used for eddy current
DELTASCOPE ® MP10 displays individual
measurement values without statistics, it has
no serial interface (no printing, no data transfer)
and does not store measurement values.
Measurement of a duplex coating (paint/zinc
coating on iron) using EDX10 probe and
DUALSCOPE ® MP40.
The CU-SCOPE CMP1A is used to measure
copper plating thickness in PCB through holes.
DUALSCOPE ® MP20 with statistical measurement
series evaluation capability. Does not store
measurements, it has no serial interface.
Measurement system Fischerscope ® MMS with
various methods for coating thickness measurement
and material testing.
SIGMASCOPE ® SMP10 for measuring the
electrical conductivity of nonferromagnetic,
electrically conducting metals.
coating thickness measurement, the DUALSCOPE ® MP20 and MP40 series
combine the magnetic induction and eddy current methods.
®
Measurement of the paint coating thickness on
a curved surface using ETD3.3 probe and
DUALSCOPE ® MP40.
Hand-held NICKELSCOPE ® NMP2 for the
measurement of nickel or nonferrous metal
coating on steel, as well as nonferrous metal
coatings on nonconductive substrates.
The FERITSCOPE ® MP30 determines the delta
ferrite content in austenitic weld metal or duplex
stainless steel.
27