Implementing an IEEE 1588 V2 Node on the ColdFire MCF5441x ...

Detailed description of the <strong>IEEE</strong><strong>1588</strong> demo software
18
Figure 11. “<strong>IEEE</strong><strong>1588</strong> Data” page of the demo application
Another import<strong>an</strong>t menu item is the Settings attribute, which has several submenus:
• <strong>1588</strong> Stack Settings—enables a ch<strong>an</strong>ge of the configuration of the <strong>1588</strong> protocol software specific
data (see Figure 12). The data c<strong>an</strong> be ch<strong>an</strong>ged during runtime <strong>an</strong>d is stored in the nonvolatile
memory to be restored after device reset.
• Network Settings—enables a ch<strong>an</strong>ge of the basic network parameters, such as the MAC address,
IP address, Gateway, <strong>an</strong>d Netmask (see Figure 13). These parameters are saved in the nonvolatile
memory <strong>an</strong>d applied after the device reset.
<strong>Implementing</strong> <strong>an</strong> <strong>IEEE</strong> <strong>1588</strong> <strong>V2</strong> <strong>Node</strong> on the MCF5441X, Rev. 0
Freescale Semiconductor