Height Safety Catalogue 2018

www.worksafety.co.nz 0800 37 37 76
Permanent Anchorage Systems
Davit Arm System
QSI introduces the new Davit Arm which provides a safe and secure
system for easy access to conflned spaces. The Davit Arm is an ideal
choice to provide overhead anchorage which can be mounted on
different bases and it conforms to EN 795:2012 Type A.
The Davit Arm is made of highly corrosion resistant stainless steel,
and can swivel a complete 360 degrees on its mounted base, hence
providing a versatile reach and access.
A unique feature is the adjustable height of the cantilever arm at 3
deflned points, with upper arm position of 2.3m, middle arm position
of 1.9m, and lowered arm position at 1.5m. This enables the use of
the Davit Arm even in those areas where the roof height is small.
The Davit Arm can be easily mounted on the ‡oor as well as on
the wall through special ‡oor and wall mounting brackets which are
available as required. The Davit Arm can also be mounted on the ‡oor
of heavy vehicles, making it extremely versatile.
QSI Winch HS 818 and SRW1001 can be easily mounted on to the
Davit Arm with the help of stainless steel fasteners.
Retrieval Fall Arrester Blocks (SRLS10R, SRLS20R and SRLS30R)
can also be installed for easy retrieval & arresting the fall of the user
using the specialized mounting brackets; Ref. HS900(06), HS900(07)
& HS900(08) respectively.
HS900 Davit Arm System
HS900(01) Floor Mounting Bracket
HS900(02) Wall Mounting Bracket
HS900(06) Mounting bracket for 30m Retrieval Block SRLS30R
HS900(07) Mounting bracket for 20m Retrieval Block SRLS20R
HS900(08) Mounting bracket for 100m Retrieval Block SRLS10R
181