Height Safety Catalogue 2018

www.worksafety.co.nz 0800 37 37 76
Slings and Connectors
Connectors
Our connectors can be used for a variety of tasks and come in several lengths to suit a customer's requirements. They are
made from UV stable, AS/NZS approved webbing and kernmantle rope.
Quick Draw Connector
Available in various lengths, with or without carabiners.
Connectors
CONQD250 Quick Draw Connector - 250mm
CONQD250C As above, with carabiners
CONQD350 Quick Draw Connector - 350mm
CONQD350C As above, with carabiners
CONQD450 Quick Draw Connector - 450mm
CONQD450C As above, with carabiners
Short Lanyard Connector
Sturdy, short webbing lanyard with a carabiner and a double action
hook. Available in various lengths.
S0103 Short Lanyard Connector - 300mm
S0105 Short Lanyard Connector - 500mm
S0106 Short Lanyard Connector - 600mm
Quick Draw Length Chart (1:10 scale)
Short Lanyard Length Chart (1:10 scale)
250mm
300mm
350mm
500mm
450mm
600mm
NOTE: Length excludes carabiners. Each carabiner adds
approx 100mm to total length of Quick Draw.
NOTE: Length is measured to the inside edges of
attachment hardware as illustrated above.
Three-way Lanyard Connector
The Three-way Lanyard Connector is designed for use with a backup
line, providing extra stability and security when ascending and
descending ropes.
The 60cm arm to be used on ascender, the short 30cm arm used to
connect to back-up line rope grab and/or chest ascender.
SLISPEL013 Three-way Lanyard Connector 13mm wide
(30cm/60cm)
SLISPEL038 Three-way Lanyard Connector 38mm wide
(30cm/60cm)
134