PD064VT8 - Hy-Line
PD064VT8 - Hy-Line
PD064VT8 - Hy-Line
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PD064VT8</strong><br />
Note 5-2 : DENB input signal.<br />
If customer wanted to off the DENB mode , you must keep the DENB (pin 27) always<br />
High or Low.<br />
� � � �<br />
Note 5-3: VCC (TYP.)=+5V<br />
� � ����<br />
������<br />
Note 5-4: The definitions of U/D & R/L<br />
(tc: the period of sampling clock)<br />
P-511-476(V:2)<br />
R/L(PIN 30)= High , U/D(PIN 31)= Low R/L(PIN 30)= Low , U/D(PIN 31)= High<br />
5-2) Backlight driving connector: JST BHSR-02VS-1 , 2 Pins<br />
Pin No Symbol Description Remark<br />
1 + Input terminal (Anode) Red<br />
2 - Input terminal (Cathode) Black<br />
6. Absolute Maximum Ratings :<br />
The followings are maximum values , which if exceeded, may cause faulty operation or damage to<br />
the unit.<br />
GND=0V, Ta=25�<br />
Parameters Symbol MIN. MAX. Unit Remark<br />
Supply Voltage VCC -0.3 +7.0 V<br />
Input Signals Voltage V-sign -0.3 VCC+0.3 V Note 6-1<br />
Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5].<br />
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be<br />
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,<br />
Ltd. Page:7<br />
HY-LINE Computer Components / www.hy-line.de/computer
Change language