Safe n Sound PPE Catalogue 2019

Contents
Hazard Workwear 2-19
Clothing & Workwear 20-33
Hand Protection 34-63
Safety Footwear 64-87
Respiratory Protection 88-119
Eye & Face Protection 120-143
Head Protection 144-153
Hearing Protection 154-169
Harness & Safety Equipment 170-173
Washroom 174-183
First Aid 184-188
Index 189-190
Personal protection equipment and workwear

Hazard Workwear
Buying Guide
Highways Agency: Chapter 8 Traffic Signs
Manual (Part 2) - Operations: Para 06.3.2
The workforce and supervisory staff should wear high visibility warning
clothing at all times when on site. Clothing shall comply with
EN 471:2003/EN20471:2013 Class 2 or 3 (Class 3 on motorways and other
high speed roads) and shall comply with the requirements of paragraph
4.2.3(b) of the Standards. The colour of the clothing shall normally be
fluorescent yellow or fluorescent orange-red complying with Table 2 of the
Standards.
The retroreflective material shall be to Class 2 as defined in Table 5 of
the Standards. In addition, on motorways and other high speed roads,
high visibility jackets or coveralls shall have full length sleeves meeting
the requirement of paragraph 4.2.4 of EN 471:2003/EN20471:2013. This
requirement may be varied to three-quarter-length sleeves where a risk
assessment shows full-length sleeves would present increased risk due to the
activity being undertaken.
Staff should also wear high visibility trousers complying with Class 1 of EN
471:2003/EN20471:2013 where the carrying of large items of equipment
or other activities may at any time obscure the visibility of the high visibility
jacket or vest.
Highways Agency: Temporary Traffic Management On High Speed Roads:
Good Working Practice (Section W7).
Operatives who are engaged in activities on live traffic lanes should wear High
Visibilty Garments EN 471:2003/EN20471:2013 Class 3.
Safety Standards Key
To aid selection, garments in this catalogue now carry icons denoting the EN Safety
Standards to which they comply. From October 2013 all newly Certificated High
Visibility Garments must comply with the NEW Standard, EN ISO 20471:2013
EN 471:
EN 343:
EN 342:
GO/RT 3279
EN 471:2003/EN20471:2013 –
High Visibility Warning Clothing
3 classes of protection
EN 343 – Protection Against Rain
3 classes of waterproofness and breathability
EN 342 – Protection Against Cold
(Temperatures 25%.

Hazard Workwear
Hazard Workwear
3

Hazard Workwear
High Visibility Clothing
KeepSAFE Hi Vis
Latex Crinkle Finish Glove
Designed to protect up to -30°C/-85°F. The glove
combines excellent thermal qualities, comfort and high
visibility. Latex crinkle coating on palm. Good grip in wet
and dry conditions. Seamless liner for comfort. Ideal
for winter conditions. Fleece liner keeps hands warm.
Uncoated back allows the hand to breathe
• Size: 9-10
• Colour: Orange
• Cartons of 12
3142X
Code: 433353
KeepSAFE EN 471
High Visibility Jacket
CONFORMS TO EN 471 CLASS 3
PU coated, waterproof outer fabric, collarconcealed
two-piece unlined hood, and
polyester quilted lining. Map pocket, internal,
and two outside lower jetted pockets. Studded
storm placket, storm cuff
• Size: S-XXL
• Colour: Saturn Yellow
Code: 305066
KeepSAFE EN 471
High Visibility Overtrousers
CONFORMS TO EN 471:1
PU coated waterproof outer fabric.
Fully taped seams. Reflective tape
• Size: S-XXL
• Colour: Saturn Yellow
3
2
EN 471:
2003 +A1:2007
EN 343
FABRIC ONLY
EN 471:
2003 +A1:2007
EN 343
Code: 343493 Pair £26.55
1
2
FABRIC ONLY
KeepSAFE Hi-Vis
Latex Coated Glove
CONFORMS TO EN 388
Seamless high visibility cotton/acrylic base for
warmth. Latex coating gives maximum
grip in wet and dry conditions. Excellent
for low light work environment
• Size: 8-10
• Colour: Saturn Yellow/Black
• Cartons of 12
Code: 303001
020
1231
KeepSAFE EN 471
High Visibility Bomber Jacket
CONFORMS TO EN 471 CLASS 3
PU coated, waterproof outer fabric with
polyester quilted lining and collar-concealed
two-piece unlined hood. Stud fastening storm
placket, elasticated cuff, internal, mobile
phone, map, and two lower slanted jetted
pockets. Reflective tape
• Size: S-XXL
Colour: Saturn Yellow
Code: 321146
Colour: High Visibility Orange
Code: 305015
EN 471:
EN 343
FABRIC ONLY
4

High Visibility Clothing
Hazard Workwear
KeepSAFE EN 471
High Visibility Jacket
CONFORMS TO EN 471 CLASS 3
PU coated waterproof outer fabric, elasticated storm cuffs and
step collar with detachable hood. Storm flap. Two outside jetted,
one inside patch pockets
• Size: S-XXL
• Colour: High Visibility Orange
EN 471:
EN 343
FABRIC ONLY
KeepSAFE EN 471
High Visibility Fleece Safety Jacket
CONFORMS TO EN 471 CLASS 3
Lightly elasticated cuffs, waist hem, and comfort collar. Zip front.
Two side lower welted pockets. Reflective tape
• Size: S-XXL
• Colour: Saturn Yellow
EN 471:
Code: 192461
Code: 343448
KeepSAFE EN 471 High Visibility PU Reversible
Safety Body Warmer
CONFORMS TO EN 471 CLASS 2
PU fabric with zip fastening and quilted lining. Double band reflective tape
• Size: S-XXL
• Colour: Saturn Yellow
2
2
EN 471:
2003 +A1:2007
KeepSAFE EN 471 High Visibility Softshell Safety Jacket
CONFORMS TO EN 471 CLASS 3
Quick drying, lightweight, easy to wear stretch softshell fabric
that’s wind resistant and has a durable water repellent finish.
Waterproof zippers, inner zip guard. Chest and two lower pockets
• Size: S-XXL
• Colour: Saturn Yellow
EN 471:
Code: 384077
Code: 305124
5

Hazard Workwear
High Visibility Clothing
KeepSAFE EN 471 High Visibility
Long Sleeve Polo Shirt
CONFORMS TO EN 471 CLASS 3.
Contrasting navy collar
• Size: S-XXL
• Colour: Saturn Yellow
Code: 362446
3
2
EN 471:
2003 +A1:2007
KeepSAFE High Visibility
Short Sleeve Safety Polo Shirt
CONFORMS TO EN471 CLASS 2; RIS-3279-TOM
(ORANGE ONLY)
• Size: M-XXL
Colour: Saturn Yellow
Code: 362467
Colour: High-Visibility Orange
Code: 362508
NEW
2
2
EN 471:
2003 +A1:2007
3
2
EN 471:
2003 +A1:2007
EN 343
FABRIC ONLY
6
KeepSAFE EN 471 High Visibility
Waterproof Jacket
CONFORMS TO EN 471 CLASS 3
PU coated breathable, waterproof outer fabric tested
to EN 343, with hood and stud adjustment at wrist.
• Fully taped seams
• Two side pockets with Velcro ® flaps
• Size: S-3XL
• Colour: Saturn Yellow
Code: 321170 Each £57.08
KeepSAFE EN 471 High Visibility
Waterproof Trousers
CONFORMS TO EN 471 CLASS 1
PU coated breathable, waterproof outer fabric tested to
EN 343,
with fully taped seams.
• Elasticated waistband
• Size: S-3XL
• Colour: Saturn Yellow
Code: 321171 Pair £35.87
Centurion Standard Peak
High Visibility Airpro Baseball
Bump Cap
Lightweight head protection,
peak length 3cm
Colour: High Visibility Orange
Code: 279805
Colour: Saturn Yellow
Code: 279806
KeepSAFE EN 471
High Visibility Waistcoat
CONFORMS TO EN 471 CLASS 2
• Velcro ® fastening
• Size: M-XXL
EN 471:
2003 +A1:2007
Colour: Saturn Yellow
Code: 430037 Each £4.95
Colour: High Visibility Orange
Code: 430034 Each £4.95
2
2
2
2
EN 471:
2003 +A1:2007

d
Stand
roup G arRailway
High Visibility Clothing
NEW
Hazard Workwear
KeepSAFE EN 471 High Visibility
Sleeved Waistcoat
CONFORMS TO EN 471 CLASS 3
Velcro ® fastening
• Size: M-3XL
Colour: High-Visibility Orange
Code: 384099
Colour: Saturn Yellow
Code: 384066
3
2
EN 471:
2003 +A1:2007
KeepSAFE EN 471
High Visibility
Executive Waistcoat
CONFORMS TO EN 471 CLASS 3
Mobile phone and clear ID pockets.
Front flap pockets. Velcro ® fastening
• Size: M-XXL
• Colour: Saturn Yellow
Code: 305310
3
2
EN 471:
2003 +A1:2007
KeepSAFE Pro Ladies Executive
Sleeveless Waistcoat
CONFORMS TO EN ISO 20471
Zipped front. ID pocket. Women’s fit.
Shaping at hem for easy access to
trouser pocket
• Size: S-XL
Colour: Saturn Yellow
Code: 305289
Colour: High-Visibility Orange
Code: 015213
NEW
KeepSAFE Pro Ladies Executive
Long Sleeved Waistcoat Yellow
CONFORMS TO EN ISO 20471 XS-M CLASS 2/L-6XL
CLASS 3
Zipped front. ID pocket. Women’s fit. Shaping at
hem for easy access to trouser pocket
• Size: S-XL
Code: 015214
Code: 015217
Colour: Saturn Yellow
Colour: High-Visibility Orange
KeepSAFE EN 471
High Visibility
Sleeved
Waistcoat
CONFORMS TO
EN 471 CLASS 3
Velcro ® fastening
• Size: S-XXL
• Colour: High
Visibility Orange
Code: 384099 Each £18.84
3
2
EN 471:
2003 +A1:2007
1
2
EN 471:
2003 +A1:2007
Scott Safety
First Base
3 HC24
Bump Cap
CONFORMS TO
EN ISO 20471 XS-M CLASS 2/L-6XL CLASS 3
Highly breathable with a micro perforated shell.
Ventilation systems and humidity reducing.
Wicking fabric sweatband included. Abs plastic
shell, design to adapt contour of the head
Code: 431228
Code: 430414
Colour: High-Visibility Orange
Colour: Saturn Yellow
KeepSAFE EN 471
High Visibility T-Shirt
• Size: S-XXL
Colour: Saturn Yellow
CONFORMS TO EN 471 CLASS 2
Code: 362453
Colour: High Visibility Orange
CONFORMS TO EN 471 CLASS 2 & GO/RT 3279
Code: 362403 Each £18.20
2
2
EN 471:
2003 +A1:2007
2
2
EN 471:
2003 +A1:2007
GO/RT 3279
GO/RT 3279
only for orange
EN 343
FABRIC ONLY
KeepSAFE EN 471
High Visibility
GO/RT 3279
Breathable Road
Trousers
CONFORMS TO GO/RT 3279 AND EN 471 CLASS 1
PU coated breathable, waterproof outer fabric.
Fully taped seams. Reflective tape
• Size: S-XXL
• Colour: High Visibility Orange
Code: 343475 Pair £45.52
7

Hazard Workwear
Flame Retardant Clothing
Flame Retardant Standards
EN 11611
Tensile strength
Tear strength
Burst strength
Seam strength
Dimensional change
Requirements of leather
Limited flame spread
Molten droplets
Heat transfer (radiation)
Electrical resistance
EN 11612 As above plus:
Heat resistance
Limited flame spread (A)
Convective heat (B)
Radiant heat (C )
Molten aluminium splash (D)
Molten iron splash (E)
Contact heat (F)
EN 14116
Flame spread
Tensile strength
Tear strength
Seam strength
EN 11611:
EN ISO 11612:
2008
EN ISO 14116:
2008
Anti-Static Standards
EN 1149
Protective clothing –
Electrostatic properties
Anti-static clothing suppresses static
charge, thereby preventing sparks,
which might cause a fire or explosion
EN 1149-5 is a part of a larger system
EN 1149 consists of the following parts:
EN 1149-1:
Test methods for the measurement of surface resistance EN 1149-5:
EN 1149-2:
Test methods for the measurement of the electrical
resistance through a material (vertical resistance)
EN 1149-3:
Test methods for the measurement of charge decay
EN 1149-4:
Garment test method (under development)
EN 1149-5:
Performance requirements
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 343: EN 1149-5: EN
2005 2006
2007 2003 +A1:2007 2008
EN 1149-5:
Arc Standard
EN 61482-2:2009
Live working-protective
clothing EN 1149-5: against the thermal
hazards of an electric arc
– Part 2
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Clas
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 61482-2:
2009
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Clas
EN 1149-5:
Water Penetration and Breathability
EN 343
Protection against weather
elements
Hi-Visibility
EN 471
Reflective materials
used
EN 1149-5:
in Hi-Visibility
clothing
Chemical
EN 13034
Protection against
chemicals
EN 1149-5:
EN 471:
2003 +A1:2007
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN
Cold Weather
EN 14058
Protection against
extreme weather
EN 1149-5:
EN 13034:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 14058:
2005 +A1:2009
Class 1 - Type A Clas
2004
1
x
x
x
x
EN
EN
8
Detachable Lining

d
roup G Stand
arRailway
d
Stand
roup G arRailway
Flame Retardant Clothing
Hazard Workwear
1
EN 471: ISO:
2003 20471:2013 +A1:2007
EN 11611: EN ISO 11612:
2008
EN 1149-5:
EN 61482-2: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
2008
2009 2005 2006
2007 2008 2006 2006 2006 2006 2006
GO/RT 3279
BlazeTEK GO/RT Flame-
Resistant Anti-Static Electric
Arc Polo Shirt
EN 1149-5:
EN 1149-5:
CONFORMS TO EN20471 CLASS 3, EN11611,
EN11612 A1.B1.C1, EN1149-5, GO/RT 3279,
IEC 61482-1-2 CLASS 1 4KA, IEC 61482-1-
1:2010 ATPV 6.2
220gm Protal / polyester / carbon
EN 1149-5: EN 1149-5:
inherent FR / AS knitted fabric. FR knitted
collar & cuffs in navy. Three button
placket. Inherently FR
• Size: S-XXL
• Colour: High-Visibility Orange
Code: 370421
1
EN 471: ISO:
2003 20471:2013 +A1:2007
BlazeTEK High-Visibility GO/RT
EN 1149-5:
EN 1149-5:
Flame-Retardant Trouser
CONFORMS TO EN ISO 20471 CLASS 1, GO/
EN 1149-5:
1149-5:
1149-5:
RT 3279, EN11612 A1 B1 C1, EN1149-5,
IEC 61482-2:2009, EN11611
300gm 50% cotton 50% polyester. 2
EN 1149-5:
EN 1149-5:
side swing pockets. 1 rear hip pocket.
Hook & Bar and zip fly fastening. Sewn in
EN 1149-5: EN 1149-5:
EN 1149-5:
front crease
• Size: 76cm-116cm (4cm increments)
• Colour: High-Visibility Orange
Code: 370004
Code: 370006
Regular length
Tall length
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
BlazeTEK High-Visibility
EN 1149-5:
Contrast Flame-Retardant
Anti-Static Coverall
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN ISO 20471 CLASS 3, EN11612 A1
B1 C1, EN1149-5, IEC 61482 -2 :2009,
EN11611
EN 1149-5:
EN 1149-5:
300gm 50% cotton 50% polyester.
Concealed stud fastening. 2 breast
pockets EN 1149-5: with flap EN 1149-5: fastenings. EN 21149-5:
side
access pockets. Action back for
EN 1149-5:
increased comfort
• Size: 92cm-140cm
(4cm increments)
• Colour: High-Visibility Yellow/Navy
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Regular length
Code: 370002
Tall length
Code: EN 1149-5: 370001
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
BlazeTEK EN 1149-5: High-Visibility
EN 1149-5:
GO/RT Flame-Retardant
Anti Static Coverall
EN 1149-5:
only EN for 1149-5: orange
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: - EN Type 1149-5: A Class 1 Class 1 - EN Type 1149-5: A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN ISO 11612:
EN ISO 11612:
2008
GO/RT 3279
2008
EN 471: ISO: EN ISO 11612: EN 1149-5:
EN 1149-5: EN 471: ISO: EN 1149-5: EN EN 1149-5: ISO 11612: EN 1149-5: EN 1149-5:
2003 20471:2013 +A1:2007
A1 2008 B1 C1
2008
2005 2003 20471:2013 +A1:2007 2006
GO/RT 3279 2007A1 2008 B1 C1
2008 2006
only for orange
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
BlazeTEK Rail Flame-
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
GO/RT 3279
GO/RT 3279
EN ISO 11612:
2008
EN ISO 11612:
A1 2008 B1 C1
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
CONFORMS TO ISO 20471 CLASS 3,
GO/RT3279, EN11612 A1 B1 C1, EN1149-
EN 1149-5:
5, IEC 61482-2:2009, EN11611
300gm 50% cotton 50% polyester.
Concealed stud fastening. 2 breast
EN 1149-5: EN 1149-5:
EN 1149-5:
pockets with flap fastenings. 2 side
access pockets. Action back for
EN 1149-5:
EN 1149-5:
EN 1149-5:
increased comfort
• Size: 92cm-140cm
(4cm increments)
EN 1149-5:
EN 1149-5:
EN 1149-5:
• Colour: High-Visibility Orange
Class 1 - Type A Class 1 - EN Type 1149-5: A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: Class 1 - EN Type 1149-5: A Class 1 - EN Type 1149-5: A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Regular length
EN 1149-5:
Code: 370750
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: - EN Type 1149-5: A Class 1 Class 1 - EN Type 1149-5: A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Resistant Anti-Static
Electric Arc Combat
Coverall
CONFORMS TO EN20471 CLASS 3,
RIS-3279-TOM, EN11612 A1 B1 C1 E1
F1, EN11611 CLASS 1 & 2, EN1149-3,
EN1149-5, IEC 61482-2 CLASS 1, ATPV
16 CAL/CM2, IEC 61482-1-2 CLASS
1 4KA
EN 1149-5:
EN 1149-5:
EN 1149-5:
Protal 5–310g/m2 Protex/cotton
enhanced inherent multi-fibre woven
EN 1149-5:
EN 1149-5:
fabric. FR reflective tape. Breast,
combat and rear flap pockets and
side pockets. Internal kneepad
pockets. Plastic studs and two way
plastic zip
• Size: S-XXXL, Regular length
• Colour: High-Visibility Orange
EN 61482-2:
2009
EN 1149-5:
EN 61482-2: EN EN 11611:
1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
2008
Class 20091
2005 2006
2007 2008 2006 2006 2006 2006 2006
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 11611:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
Code: 370422
3
EN 61482-2:
2009
EN 61482-2:
Class 20091
EN 1149-5:
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Tall length
Code: 370751
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
1
EN 61482-2:
2009
EN 1149-5:
EN 61482-2: EN EN 11611:
1149-5: EN 1149-5: EN 1149-5:
2008
Class 20091
2005 2006
2007
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
9
EN 1149-5:

Hazard Workwear
Flame Retardant Clothing
EN ISO 11612:
2008
EN ISO 11612:
A1 2008 B1 C1 F1
EN 11611:
BlazeTEK
Flame-Resistant
Long Sleeve
Undervest
CONFORMS TO EN11612
A1.B1.C1.F1, EN11611
Ideal for additional
protection beneath
coveralls etc.
• Size: S-XXL
• Colour: Grey
Code: 301105
BlazeTEK Flame-Resistant
Longjohns
CONFORMS TO EN11612 A1.B1.C1.F1,
EN11611
Ideal for additional protection beneath
coveralls etc.
• Size: S-XXL
• Colour: Grey
Code: 019309
3
EN 471: ISO:
2003 20471:2013 +A1:2007
EN ISO 11612:
2008
EN ISO 11612:
AB1 2008 C1
BlazeTEK Flame-Resistant
Anti-Static Protal
Polo Shirt
EN 1149-5:
1149-5:
CONFORMS TO EN16112 A1 BA C1, EN1149-
5, EN ISO 20471 CLASS 3 , IEC 61482-1-2
CLASS 14KA, IEC 61482-1-1 ATPV 7.0 CAL/
CM, EN11611
210gm Protal / cotton / FR, AS knitted
fabric, with 3 button placket. Knitted
collar, long sleeves. Rib cuffs with
elastane for improved fit
• Size: M-XXL
• Colour: Saturn Yellow
Code: 370541
1
EN 471: ISO:
2003 20471:2013 +A1:2007
EN ISO 11612:
2008
EN ISO 11612:
A1 2008 B1 C1
BlazeTEK Flame-Resistant
Anti-Static Protal Trouser
BlazeTEK Anti-Static
EN 1149-5:
Flame-Retardant
Coverall
CONFORMS TO EN 11612 A1,B1,C1,
EN 1149-5 & EN 11611
EN Double 2006
1149-5: stitched Pyrovatex fabric
350 gr/m 2 , with triple stitching
at stress points. Covered twoway
zipper with large pullers. 2
side, 2 breast, 2 back plus ruler
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN and 1149-5: sleeve pen EN 1149-5: pockets. Action
EN 1149-5:
back and two escape filter EN loops. 1149-5:
Heavy press-studs on collar and
sleeves. Double stitched flame
retardant reflective striping on
EN 1149-5:
EN shoulders, 1149-5: arms & legs
• Size: 36-54"
EN 1149-5:
Colour: Orange
Code: 370618
EN 1149-5: EN 1149-5:
Class
EN
1
114
- T
2008
200
EN 61482-2:
2009
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class EN 1114
- T
EN 1149-5:
EN 1149-5:
EN 11611:
Class 1 - Type A Class 1 - Type A Class 1 -
EN 1149-5:
EN 13034:
2005 EN 1149-5: +A1:2009
EN 1149-5: EN 1149
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
EN 1149-5: EN 1149-5:
EN 114
Class 1 - Type A Class 1 - Type A Class 1 -
EN ISO 11612:
2008
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
EN 1149-5:
EN 1149-5:
EN 114
Class 1 - Type A Class 1 - Type A Class 1 -
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class
Class 1 - T
EN 1149-5: EN 1149-5:
EN 114
CONFORMS TO EN11612 A1.B1.C1. EN1149-
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
5, EN ISO 20471 CLASS 1 EN11611 IEC
61482-1-2 CLASS 1 4KA EN 61482-1-1 ATPV
10.5 CAL/CM
270gm Protal / cotton / negastat FR AS
woven fabric. Two side pockets. Seven
belt loops
• Size: 28"-46"
• Length: Regular leg 31"
• Colour: Saturn Yellow
Code: 370545
EN 1149-5:
EN 11611: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
2005
2005 2006
2007 2008 2006 2006
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 11611: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
2005
2005 2007 2008 2006 2006
Class 1 - Type A Class 1 - Type A Class 1 -
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
Class Type Class Type Class Type Class Type Class Type Class Type Class EN 1149-5:
EN 114
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 -
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
Class Type Class Type Class Type Class Type Class Type Class Type Class EN 1149-5:
EN 114
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5:
EN 1149
EN 1149
EN 1149
EN 1149
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
Class 1 - Type A Class 1 - Type A Class 1 -
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
Class Type Class Type Class Type Class Type Class Type Class Type Class EN 1149-5: EN 1149-5:
EN 114
NEW
NEW
NEW
Class 1 - Type A Class 1 - Type A Class 1 -
EN 1149-5: EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
1
EN 1149-5:
EN 471: ISO: EN 1149-5:
2003 20471:2013 +A1:2007
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
EN ISO 11612:
2008
EN ISO 11612:
A1 2008 B1 C1 E1
EN ISO 11612:
2008
EN ISO 11612:
A1 2008 B1 C1
EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - T
EN 11611:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
2005
2005 2006
2007 2008 2006 2006 2006 2006 2006
EN EN 61482-1-1:
61482-2:
2009 2010
EN ISO 11612:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
2008
EN ISO 11612:
A1 2008 B1 C1
EN 11611:
BlazeTEK EN 1149-5: Cotton
EN 1149-5:
EN 1149-5:
Flame-Retardant Trousers
CONFORMS TO EN11611-1 A1
AND EN11612, A1, B1, C1, F1 340G/M 2
100% FR cotton fabric. Two side pockets
EN 1149-5: EN 1149-5:
EN 1149-5:
• Size: 30"-46"
• Colour: Navy
Length: Regular Leg
Code: 342456
Length: Long Leg
Code: 370453
EN 1149-5:
EN 11611:
EN 1149-5:
BlazeTEK Cotton
Flame-Retardant Coverall
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
CONFORMS TO EN11611 CLASS 1
A1, EN11612 A1 B1, C1, F1 340G/M 2
Concealed stud front. Breast pocket, oversized stud
fastened flap. Rule and two side access pockets
• Length: Regular Leg
• Size: S-XXL
EN • 1149-5: Colour: Navy EN 1149-5:
EN 1149-5:
EN 1149-5:
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5: EN 1149-5:
EN 1149-5: EN 1149-5:
EN 1149-5:
EN 1149-5:
Code: 370451
BlazeTEK Flame-Resistant
Anti-Static Protal EN 1149-5: Coverall
CONFORMS TO EN ISO 20471 CLASS 3, EN11612 A1 B1
C1 E1, EN1149-5, EN11611, IEC 61482-1-2 :2207CLASS
1 4KA, EN61482-1-1 STPV 13.2 CAL/CM
300gm Protal / cotton / negastat FR and antistatic
EN woven 1149-5: fabric. Concealed 2-way zip. Two chest,
two side access pockets. Elasticated action-back.
Internal kneepad pockets
• Size: S-XXL
• Length: Regular leg 32"
• Colour: Saturn Yellow
Code: 370489
Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5:
EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5:
10

Disposable Coveralls
Specialist Disposable Coveralls
Hazard Workwear
T
3
T
3
CATEGORY III TYPE 3-B* TYPE 4 TYPE 5-B
CATEGORY III TYPE 3 TYPE 4 TYPE 5
TYPE 6
EN 1073-2: 2002
Class 1
EN 1149-5: 2008* EN 14126: 2003
DuPont Tyvek ® 500 HV
COMPLIANT WITH GO/RT 3279 ISSUE 8
Coverall with collar that combines type 5/6 protection
and high-visibility to the highest class (EN 20471 -
Class 3/3). Biological protection. Reflective bands at
chest, arms, legs and shoulders. Elasticated waist
(glued-in), ankles and cuffs. DuPont Tyvek ® zipper.
High visibility orange. Antistatic (inside).
• Size: S-XL
• Cartons of 25
• Colour: Hi-Viz Orange
Manufacturer’s code: TY 0125S HV 00PI
Code: 431548
TYPE 6
EN 1073-2**
EN 1149-1*
EN 14126
TYPE 3B
DuPont Tychem ® 2000 C
CAT. III, TYPE 3B/4B/5B/6B
Coverall with elastic face opening and adhesive chin
flap for tight fit around respirator, stitched and overtaped
seams, double self-adhesive zipper flap, elastic
cuffs, ankles and waist, thumb loops, 100% particle
tight fabric, excellent barrier against a broad range
of concentrated inorganic chemicals and biological
hazards. Antistatic treatment (inside).
• Size: S-XXL
• Cartons of 25
• Colour: Yellow
Manufacturer’s code: TC CHA5 T YL 00
Code: 431500
CAT III
TYPE 6
T
3
T 3
EN
DuPont Tyvek ® 800 J
CAT III. TYPE 5B/6B
Robust yet lightweight coverall, (

Hazard Workwear
Disposable Coveralls
Specialist Disposable Coveralls
NEW
CAT III
EN
T
3
T 3
EN
T4
EN
T 5
T
3
CAT III T 3
T4 T 5 TYPE 6
DuPont Tychem ® 6000 F Plus
CAT. III, TYPE 3B/4B/5B/6B
Coverall with elastic face opening and chin flap for tight fit around respirator, stitched
and over-taped seams, double self-adhesive zipper flap, double zipper and double
cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric,
excellent barrier against a broad range of organic chemicals, highly concentrated
inorganic chemicals and biological hazards. Antistatic treatment (inside).
• Size: S-3XL
• Colour: Grey
Manufacturer’s code: TF CHZ5 T GY 00
Code 430773
EN
EN
EN
Alpha Solway
Alphachem X150
Hooded Coverall
Yellow
Light, durable and cost
effective disposable
chemical protective garment
manufactured using
lightweight HDPE fabric.
Offers chemical resistance
against splashes and sprays
of hazardous chemicals in
Type 3 and 4 applications
• Sizes: S-XXL
• Colour: Yellow
Code 432070
CAT III
T
3
T 3
T4
T 5
TYPE 6
EN
EN
EN
12
DuPont Tychem ®
6000 F Grey
CAT. III, TYPE 3B/4B/5B/6B
Coverall for protection against a broad
range of chemicals and biohazards.
• Sizes: S-3XL
• Colour: Grey
Manufacturer’s code: TF CHA5 T GY 00
Code: 382112
T
3
CAT III T 3
T4 T 5 TYPE 6
DuPont Tychem ® 6000 F Orange
CAT. III, TYPE 3B/4B/5B/6B
Coverall for protection against a broad range of chemicals and biohazards.
• Sizes: S-3XL
• Colour: Orange
Code: 014097 Manufacturer’s code: TF CHA5 T OR 00
EN
EN
EN

Disposable Coveralls
Type 4/5/6
Disposable Coveralls
Hazard Workwear
CATEGORY III TYPE 4
TYPE 5
TYPE 6
EN 14126 EN 1149-1
CATEGORY III TYPE 5 TYPE 6
CATEGORY III TYPE 5 TYPE 6 EN 1149-5-2008*
DuPont Tyvek ® 200 Easysafe
CAT. III, TYPE 5/6
Soft and comfortable coverall. High robustness and
breathability. Polyethylene non-woven fabric
• Size: M-XXL
• Cartons of 25
• Colour: White
Manufacturer’s code: TS CHF5 S WH DE
Code: 430912
EN 1073-2
DuPont Tyvek ® 500 Xpert
CAT III. TYPE 5B/6B
Coverall with 3-piece hood. Ergonomic-protective
design. Stitched external seams. Elasticated wrists,
ankles and face. Elasticated waist (glued-in). Tyvek ®
zipper and flap. White. Antistatic
• Size: S-3XL
• Colour: White
• Cartons of 25
Manufacturer’s code: TY CHF5 S WH XP
Code: 382104
EN 1149-1
EN 14126: 2006
DuPont Tyvek ® 600 Plus
CAT III. TYPE 5B/6B
Coverall with 3-piece hood. Stitched and over-taped
seams. Thumb loops. Tunnelled elastication at wrists,
ankles and face. Elasticated waist (glued-in). Tyvek ®
zipper. Self-adhesive zipper and chin flap (for tight fit
around respirator). White. Antistatic
• Size: S-3XL
• Cartons of 20
• Colour: White with Blue overtaped seams
Manufacturer’s code: TY CHA5 T WH 00
Code: 382114
EN 1073-2
CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1
CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1
3M 4540+ Protective
Coverall
CONFORMS TO CATEGORY 3, TYPE 5 & 6,
EN 1073-2, EN 1149-5
Draping laminated material offering good
protection against dust and light liquid
splashes. Breathable back panel for
reduced heat stress. Elasticated waist
and ankles. Knitted cuff. 3 panel hood. 2
way zipper with sealable storm flap
• Size: S-3XL
• Colour: White
Manufacturer’s code: 4540+
Code: 382042
3M 4530 Protective Coverall
CONFORMS TO CATEGORY 3, TYPE 5 & 6,
EN 1073-2, EN 1149-5
Excellent chemical and particulate
holdout, with limited liquid splash
protection. Lightweight & breathable
whilst offering protection against
hazardous dust and limited liquid splash.
Material compliant to EN 14116 index
1 (must be worn over index 2 or 3
garments). Knitted cuffs, elasticated
waist and ankles. 3 panel hood. Low
linting. 2 way zipper and sealed flap
• Packed in cartons of 20
• Size: M-XXL
• Colour: Blue
Manufacturer’s code: 4530
Code: 382041
13

Hazard Workwear
14

Disposable Coveralls
NEW
NEW
Hazard Workwear
TYPE 5
TYPE 6
EN 1073-2
EN 1149-5
MICROGARD ® 1800
Comfort Model 195
TYPE 5-B
TYPE 6-B
EN 1073-2
CONFORMS TO TYPE 5 EN ISO 13982-1 DRY PARTICLE
SUIT,TYPE 6 EN13034 LOW LEVEL SPRAY TIGHT
SUIT,EN1149-5 ANTI-STATIC,EN1073-2 BARRIER TO
RADIOACTIVE PARTICULATES - CLASS 1
Proven barrier to low concentration liquid chemicals
& airborne particulates. Air and moisture vapour
permeable (“breathable”) SMS hood, full back
and underarms to help reduce the risk of heat
stress. Tested and certified in accordance with EN
1149-5 (anti-static). Silicone free - critical in spray
painting applications. Low linting - reduced risk
of contamination in critical areas. Bound seams,
superior strength, liquid and particle barrier. Suitable
for Aerospace, Automotive, Boat and ship building,
Life sciences, Metal fabrication, Wind turbine
manufacturing. Colour: White
Size: S-L Cartons of 50
Code: 370100
Size: XL-XXL Cartons of 40
Code: 370101
TYPE 5 TYPE 6 EN 1149-5
EN 1073-2 EN ISO 14116
INDEX 1/0/0
MICROGARD ® 1500
Standard Model 138
CONFROMS TO EN ISO 13982-1TYPE 5 PARTICULATE
PROTECTION EN13034 TYPE 6 REDUCED SPRAY.
Designed for workers involved in the stripping, clear
up or handling of asbestos, general maintenance,
construction and contract cleaning. 3-piece hood.
2 way front zipper with re-sealable storm flap.
Elasticated hood, wrists, waist and ankles. Stitched
seams. Colour: White with Red Stitching
• Size: S-XXL Cartons of 40
Code 383049
EN 1149-5
EN 1149-5
DIN 32781
MICROGARD ® 2000
STANDARD Coverall Model 111
CONFORMS TO EN ISO 13982-1 TYPE 5 PARTICULATE
PROTECTION. EN13034 TYPE 6 REDUCED SPRAY. EN1073-2
BARRIER TO RADIOACTIVE PARTICULATES - CLASS 2. EN14126
BARRIER TO INFECTIVE AGENTS. EN1149-5 ANTI-STATIC
Provides both protection and comfort with exceptional
liquid and particulate protection. Ideal for a wide
range of industrial applications. 3-piece hood. 2-way
front zipper with re-sealable storm flap. Finger loops.
Elasticated hood, waist, wrists and ankles
Applications include: Pharmaceutical industries,
Agriculture, Cleanrooms, Paint spraying, Crime scene
investigation, Veterinary services. Colour: White
• Sizes S-XXL
Also available as comfort model 129
Manufacturer’s code: MC2000 WH20-B-00-111
Code: 430867
TYPE 5 TYPE 6 EN 1073-2
MICROGARD ® 1500
Model 113
Air and water permeable (breathable) to help reduce.
Silicone-free – critical in spray painting applications.
Optimised body fit – improves wearer comfort and
safety. Silver reflective tape for enhanced visibility.
3-piece hood. Elasticated hood, wrists, waist and
ankles. 2-way front zipper with resealable stormflap
Stitched Seams. Combining strength with particle barrier
Applications: Asbestos related work, Handling powders,
General maintenance, Construction
• Size: S-XXL
• Cartons of 40
• Colour: Orange
Manufacturer’s code: MG1500 OR15 OR155-00113
Code 383048
• Not illustrated, Colour: White
• Size S-XXL – Model 138 Cartons of 50
Manufacturer’s code: MG1500 WH15S-00138
Code 383049
T
3
TYPE 3-B TYPE 4-B
TYPE 5-B
EN 14126 EN 1073-2 EN 1149-5
MICROCHEM ® 3000 Model 111
Multi-layer barrier fabric effective against numerous
chemicals. Lightweight yet durable. Anti-static – tested
according to EN1149-5. 2-piece hood. Double zip
closure. Double cuffs. Elasticated hood, waist, double
cuffs and ankles. Ultrasonically Welded Seams. Provides
a strong liquid and particle barrier Applications:
Chemicals,Oil and petrochemicals. Pharmaceuticals.
Food industry (caustic clean downs), Sewage purification
installations. Industrial and tank cleaning, Mining
• Colour: Yellow
Size: S-M Cartons of 25
Manufacturer’s code: MC3000 YE30W-00111
Code 3830429
Size: L-XXL Cartons of 20
Manufacturer’s code: MC3000 YE30W-00111
Code 383055
T
3
TYPE 3-B TYPE 4-B
TYPE 5-B
EN 14126 EN 1073-2 EN 1149-5
MICROCHEM ® 4000
Model 111
Permeation tested against over 190 chemicals, including
chemical warfare agents. Textile-like inner improves
wearer acceptance. Anti-static – tested according
to EN1149-5. 2-piece hood. Double zip closure.
Double cuffs with knitted inner cuff. Elasticated hood,
outer cuffs, waist and ankles. Ultrasonically Welded
& Taped Seams. Applications: Chemical handling/
transportation, Oil-based mud protection, Hazardous
waste remediation, Sewage purification installations,
Industrial/tank cleaning, HAZMAT Emergency Response,
Pharmaceutical, Mining, Agriculture. Colour: Green
• Size: S-XXL Cartons of 10
Manufacturer’s code: MC400 GR40T-00111
Code 383041
15

Hazard Workwear
Disposable Coveralls
NEW NEW NEW
EN
TYPE 6
EN
TYPE 6
EN
TYPE 6
EN
T 5
EN
T 5
EN
T 5
EN ISO 14116:
2008
EN
EN
Alpha Solway
Alphashield 1000
Hooded Coverall
White
Made from lightweight
spun-bonded polypropylene.
Designed to protect
workers from hazardous substances or sensitive
products and processes from contamination
• Size: S-3XL
• Colour: White
Alpha Solway
Alphashield 2200
Hooded Coverall
White
Bound seam made from
polypropylene and polyethylene.
Designed to protect workers
from hazardous substances or sensitive products and
processes from contamination
• Size: S-3XL
• Colour: White
Alpha Solway
Alphashield 2000CP
Hooded Coverall
White
Offers protection from
particulate hazards through
to liquid chemical splash,
flames and sparks
• Size: S-3XL
• Colour: White
Code: 432067
Code: 432068
Code: 432069
CATEGORY III TYPE 5 TYPE 6
CATEGORY III TYPE 5 TYPE 6
EN 1073-2
EN 1149-1
EN 1073-2
EN 1149-1
KeepSAFE Type 5/6
Hooded Coveralls
with Added
Biological
Protection
CONFORMS TO EN 13034 (TYPE 6), EN 13982 (TYPE 5), EN
1073 (PROTECTION AGAINST RADIOACTIVE PARTICULATES), &
EN 1149-1 (ANTI-STATIC)
Combining strong chemical protective coverall with
added benefit of better breathability. Microporous film
laminate front, SMMS fabric on back panel. Helps
reduce body heat, vapour build-up. Elasticated waist,
wrist, ankle
• Size: M-XXL
• Colour: White
• Cartons of 50
Code: 383002
EN 14126
TYPE 3B
KeepSAFE
Type 5/6 Hooded
Coveralls
CONFORMS TO EN13982 (TYPE 5),
EN13034 (TYPE 6) COMPLEX
DESIGN, EN1073 (PROTECTION
AGAINST RADIOACTIVE P
ARTICULATES),
& EN1149-1 (ANTI-STATIC)
Excellent chemical particulate holdout and limited
chemical splash. Protects against radioactive
particulates contamination. Suitable for asbestos
removal. Breathable and anti-static. Elasticated hood,
ankles, wrists. Fully covered front zip. Cartons of 50
Size: M-XXL
Colour: White
Code: 382045
Size: M-XXL
Colour: Navy Blue
Code: 382047
KeepCLEAN
Disposable Hooded Coveralls
Light protection from dirt and grease. Polypropylene, zip
front. Elasticated hood, cuffs
• Size: M-XXL
Colour: White
Code: 382020
Colour: Blue
Code: 382019
16

Disposable Coats & Accessories
Tyvek ® 500 Hood
CONFORMS TO EN 14126
Flange assembled with the overcasting. Elastic around neck and face. Inside seams
• Size: One size fits all
• Cartons of 200
• Colour: White
Code: 431981
Manufacturer’s code: PH30LO
Hazard Workwear
Tyvek ® 500 Sleeve
CONFORMS TO EN 14126
Elasticated both ends
• Size: 50cm (18")
• Cartons of 200
• Colour: White
Code: 431982
Tyvek ® 500 Boot Cover with Antislip
CONFORMS TO EN 14126
Slip retardant sole. Leg ties. Anti-static treatment
• Size: One size only
• Height: 48cm
• Cartons of 200
• Colour: White
Code: 431984
Manufacturer’s code: PS32LA
Manufacturer’s code: POB0
Tyvek ® 500
Shoe Cover
CONFORMS TO EN 14126
New stitched-in slip retardant sole.
Anti-Static treatment
• Size: one size only
• Packed in cartons of 200
• Colour: White
Manufacturer’s code: POS0
Code: 431983
NEW
Tyvek ® 500 Lab Coat
with Zipper and Pockets
CONFORMS TO EN 14126
Collar, zip and two pockets.
Inside seams
• Size: S-XL
• Packed in cartons of 25
• Colour: White
Manufacturer’s code: PL309
Code: 431953
Ansell Microgard ®
2000 Lab Coat
CONFORMS TO EN 13034 TYPE (PB) 6
PARTIAL BODY PROTECTION. EN 14126
BARRIER TO INFECTIVE AGENTS. EN
1149-5 ANTI-STATIC
Offers protection from infective
agents, pesticides, particulates,
fibres & liquid chemical spray. For
use in Industries such as Food
processing, Life sciences and
Metal fabrication. 2 pockets, a
front zip, bound seems which have
superior strength and a liquid and
particle barrier.
• Size: S-3XL
• Packed in cartons of 60
• Colour: White
Code: 383019 Manufacturer’s
code: WH20-B-00-209
17

Hazard Workwear
Food Industry Disposables
Cater Safe is a comprehensive range of disposable workwear ideally suited to the food industry. The range encompasses
hats, caps, coats, beard masks, aprons, sleeves and overshoes, with most available in a variety of colours.
Cater Safe Disposable Apron
Pack of 100 disposable aprons in poly pack.
Manufactured from opaque polythene
• Size: 690×1066mm (27×42")
Colour: White
Code: 343230
Colour: Blue
Code: 343231
Colour: Red
Code: 343233
Colour: Green
Code: 343232
Colour: Yellow
Code: 343234
Cater Safe Visitor’s Coat
Standard size polythene coat. Front popper fasteners.
Individually packed in pocket size sachet
• Size: One size
• Cartons of 100
Colour: White
Code: 3432146
Colour: Blue
Code: 300156
Cater Safe Disposable Oversleeves
Low density polyethylene (LDPE).
Enclosed elastication both ends
• Size: 16" in length
• Cartons of 10
Colour: Blue
Code: 343106
Colour: Red
Code: 343109
Colour: Green
Code: 343108
Colour: Yellow
Code: 343110
KeepCLEAN Vinyl Powder-Free
Disposable Gloves
Smooth exterior, beaded cuff. Powder free. Approved
for food use. Dispenser box
• Size: S-XL
• Box of 100
• Cartons of 10
KeepCLEAN Vinyl Powdered
Disposable Gloves
Smooth exterior, beaded cuff. Lightly powdered.
Approved for food use. Dispenser box
• Size: S-XL
• Box of 100
• Cartons of 10
Cater Safe
Non-Woven
Coat
Non-woven material.
Press stud fasteners,
no pockets.
Individually packed
in polybags for
improved hygiene
• Size: M-XL
• Cartons of 50
• Colour: White
Code: 304661
Code: 304663
Colour: Clear
Colour: Blue
Code: 304997
Code: 304994
Code: 304576
Code: 304577
Colour: Clear
Colour: Blue
Colour: Red
Colour: Green
Code: 300102
18

Food Industry Disposables
Hazard Workwear
Cater Safe Unisex Hairnet Metal Clipped
(Detectable)
Comfortably controls hair. Gives product protection.
Metal detectable. Coarse mesh
• Pack of 100
Coarse mesh
Colour: Blue
Code: 300460
Close Mesh
Colour: Blue
Code: 300461
Unisex Hairnet Metal Free
Close Mesh
Colour: Blue
Code: 300477
Cater Safe Pleated Mob Caps
Soft, lightweight, total head cover. Double stitched, fully
elasticated. Non-woven fabric
• Pack of 100
• Cartons of 10
Colour: White
Code: 3001181
Colour: Blue
Code: 300111
Colour: Red
Code: 300113
Colour: Green
Code: 300112
Cater Safe Balaclava with Eye Slit
Lightweight breathable hood. Short neck, eyeslit,
elasticated hem. Polyester warpknit fabric
• Cartons of 10
Colour: White
Code: 300202
Colour: Red
Code: 300201
Colour: Blue
Code: 300204
Cater Safe Disposable Beard Mask
Soft spun bonded non-woven fabric
• Size: Standard
• Pack of 100
• Cartons of 10
• Colour: Blue
Code: 382514
Cater Safe Fine Mesh Beard Snood
• Size: One size fits all
• Pack of 36
• Colour: Blue
Code: 300455
Cater Safe Disposable Overshoes
Tough hard wearing CPE. Elasticated top
• Case of 100
Size: 36mm (14")
Colour: Blue
Code: 149003
Size: 40mm (16")
Colour: Blue
Code: 300155
KeepCLEAN Disposable Nitrile
Powder-Free Gloves
Oil and chemical resistant, and
suitable for use within the food
industry. Latex and
powder-free. Rolled cuff
for additional strength
• Size: S-XL
• Box of 100
• Cartons of 10
• Colour: Blue
Code: 304641
KeepCLEAN Latex Powder-Free
Disposable Gloves
Approved for use in food preparation.
100% natural latex.
Dispenser box. Ambidextrous
• Size: S-XL
• Box of 100
• Cartons of 10
• Colour: Natural
Code: 304671
KeepCLEAN Latex Powdered
Disposable Gloves
Approved for use in food preparation. 100% natural
latex. Dispenser box. Ambidextrous
• Box of 100
• Cartons of 10
Size: S-XL
Colour: Natural
Code: 015031
Size: S-L
Colour: Blue
Code: 015030
19

Clothing & Workwear
DURABLE
COMFORT
VALUE
ENDURE
Day in, day out, you
work in harsh and
dirty conditions,
and you need
something that
can withstand the
hard work that
you do. That's
where Endurance
comes in, offering a
range of workwear
to meet any
eventuality!
20
• Softshell jackets
• Sweatshirts
• Fleeces
• Bodywarmers
• Polo shirts
• T-shirts
We've got you covered!

Clothing & Workwear
Clothing & Workwear
21

Clothing & Workwear
Polo Shirts, T-Shirts & Sweatshirts
Helly Hansen
Salford Pique Polo Shirt
100% Cotton - 210g/m². Ribbed collar .
Ribbed cuffs. HH logo on left arm
• Size: M, L, XL, XXL
Colour: Black
Manufacturer’s code: 79182-990
Code: 430830
Colour: Grey
Manufacturer’s code: 79182-970
Code: 430831
Colour: White
Manufacturer’s code: 79182-900
Code: 430832
Colour: Navy
Manufacturer’s code: 79182-590
Code: 430834
Colour: Orange
Manufacturer’s code: 79182-290
Code: 430836
Helly Hansen
Liverpool Pique Polo Shirt
100% Polyamide - 195g/m². Ribbed
collar
• Size: M, L, XL, XXL
• Colour: Black
Manufacturer’s code: 79044-990
Code: 430837
Endurance T-Shirt
Ideal for embroidering with company
logo. Twin needle sleeves and collar.
Taped neck and shoulders. 100% heavy
cotton
• Size: S, M, L, XL, XXL
Colour: Black
Code: 362681
Colour: Navy Blue
Code: 362685
Colour: Royal Blue
Code: 362687
Endurance Heavyweight
Polycotton Polo Shirt
Comfortable and durable. Twin needle
stitching. 3-button placket, side vents.
Taped neck and shoulders. 250g/m 2
50/50 polycottonn
• Size: S, M, L, XL, XXL
Colour: Black
Code: 192768
Colour: Navy Blue
Code: 193676
NEW
Endurance Long Sleeve
Polycotton Polo Shirt
Stylish, comfortable long-sleeved polo
shirt. Knitted cuffs and collar. 3-button
placket, extended back with side vents.
250g/m 2 50% polyester, 50% cotton
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 362178
Endurance Lightweight
Polycotton Polo Shirt
Comfortable, ideal for workplace. Twin
needle stitching. 3-button placket, knitted
cuffs/collar. Taped neck and shoulders.
220g/m 2 polycotton
• Size: S, M, L, XL, XXL
Colour: Black
Code: 362671
Colour: Royal Blue
Code: 362677
Colour: Bottle Green
Code: 362672
Colour: Dark Navy
Code: 362675
Colour: Red
Code: 362676
Endurance Sweatshirt
Traditional sweatshirt style with
hardwearing workwear features.
65/35 polycotton fleece
sweatshirt 300g/m 2 . Knitted
rib neckline, sleeve cuffs
and hem for fit and style
• Size: S, M, L, XL, XXL
Colour: Navy
Code: 368250
Colour: Black
Code: 192793
Colour: Heather Grey
Code: 193669
Colour: Red
Code: 192764
Colour: Royal Blue
Code: 368251
Colour: Bottle Green
Code: 192792
Colour: Charcoal
Code: 192810
22

Trousers
Clothing & Workwear
Endurance Essential Work Trousers
Permanent, sewn-in front seams. Concealed hook and
bar fastening at waist. Mitred rear patch and two hip
swing pockets. 245g/m 2 polycotton fabric
• Size: 30-42" Waist
• Colour: Navy Blue
Length: Regular Leg 31"
Code: 380021
Length: Long Leg 33"
Code: 380022
Endurance Cargo Trousers
Part elasticated waistband for comfort. Button fastening.
Multiple pockets
Colour: Black
Length: Regular Leg (31")
Code: 320251
Length: Long Leg (33")
Code: 320250
Colour: Navy Blue
Length: Regular Leg (31")
Code: 371212
Length: Long Leg (33")
Code: 371214
Endurance Tradesman Trousers
A great value combat trouser with all the
benefits of a traditional work trouser. 275gsm
65/35 Polyester Cotton fabric. Triple stitched
on all major seams. Enhanced stain and liquid
repellent finish. Reinforced Nylon external knee
pad pockets. Elasticated panel on waist for
enhanced fit. Two rear patch pockets with Velcro
fastening flaps. Reinforced hammer loop and
Velcro loop for tool belt. Increased size phone
pocket to suit new larger sized smart phones
Colour: Black
Size: 30" to 48" Short
Code: 430023
Size: 30" to 48" Regular
Code: 430024
Size: 30" to 48" Tall
Code: 430025
Colour: Navy
Size: 30" to 48" Short
Code: 430026
Size: 30" to 48" Regular
Code: 430027
Size: 30" to 48" Tall
Code: 430028
Endurance Work Trousers
Cargo style pockets. Two front pockets,
two rear pockets. External knee pad
pockets. 260g/m 2 polycotton
• Sizes 30-42" waist
Colour: Black
Length: Short Leg (29")
Code: 380011
Length: Regular Leg (31")
Code: 380012
Length: Long Leg (33")
Code: 380013
Colour: Navy Blue
Length: Short Leg (29")
Code: 380014
Length: Regular Leg (31")
Code: 380015
Length: Long Leg (33")
Code: 380016
Endurance Action Trousers
260g/m 2 polycotton fabric. Button and
zip fastening. Multi zipped pockets.
Kneepad pockets
• Sizes 30-42" waist
Colour: Black
Length: Regular Leg (31")
Code: 380017
Colour: Black
Length: Long Leg (33")
Code: 380018
Colour: Navy Blue
Length: Regular Leg (31")
Code: 380019
Colour: Navy Blue
Length: Long Leg (33")
Code: 380020
23

Clothing & Workwear
Trousers
Helly Hansen Sheffield Pant
EN ISO 15797. Polycotton 245g, 65% Polyester, 35%
Cotton. Two hand pockets. Two back pockets, one with
flap. Ruler pocket. Side pocket . Knee pad pockets
accessible from the inside . Fold at bottom hem gives
option to extend leg length by 5cm
Sizes: XS-3XL
Colour: Black
Manufacturer’s code: 76468-990
Code: 430853
Sizes: XS-3XL
Colour: Black/Grey
Manufacturer’s code: 76468-979
Code: 430854
Sizes: XS-3XL
Colour: Black/Royal Blue
Manufacturer’s code: 76468-559
Code: 430855
Helly Hansen Durham Service Pant
65% Polyester, 35% Cotton - 245 g/m². Plastic covered
metal buttons. Two pockets at front. Broad belt tunnel at
back for extra strength and stability. Two back pockets.
Fold at bottom hem gives option to increase length of
leg by 5cm
Sizes: XS-3XL
Colour: Black
Manufacturer’s code: 76466-990
Code: 430856
Sizes: XS-3XL
Colour: Navy Blue
Manufacturer’s code: 76466-590
Code: 430857
Sizes: XS-3XL
Colour: Grey
Manufacturer’s code: 76466-970
Code: 430858
Helly Hansen Ashford Service Pant
65% Polyester, 35% Cotton - 275g/m². Two pockets
at front. Thigh pocket with flap. Ruler pocket. Two back
pockets. Gusset at crotch. Belt loops with Click-on
function for additional accessories. Fold at bottom hem
gives option to increase length of leg by 5cm
Sizes: XS-3XL
Colour: Black
Manufacturer’s code: 76447-990
Code: 430859
Sizes: XS-3XL
Colour: Navy Blue
Manufacturer’s code: 76447-590
Code: 430860
Helly Hansen pant size guide
24
Helly Hansen Ashford Construction Pant
65% Polyester, 35% Cotton - 275g/m². Reinforcement:
100% Cordura ® fabric - 219 g/m². Two pockets at
front, thigh pocket with flap. Two hanging pockets in
Cordura ® fabric with double bottom for extra durability.
Ruler pocket and two back pockets. Broad belt tunnel
at back for extra strength and stability. Gusset at crotch.
Loops with double Velcro closure on both sides for
hammer holders. Belt loops with Click-on function for
additional accessories. Fold at bottom hem gives option
to increase length of leg by 5cm. Knee pad pockets in
Cordura, accessible from the outside. Knee pad position
can be adjusted by 5cm for better fit
Sizes: XS-3XL
Colour: Black
Code: 430861 Manufacturer’s code: 76438-990
Sizes: XS-3XL
Colour: Navy Blue
Code: 430862 Manufacturer’s code: 76438-590
Size Waist " Leg " HH Ref
XS 30 30.5 C44
S 31 31.5 C46
M 33 32 C48
M + 34 32 C50
L 36 32.5 C52
L + 38 33 C54
XL 39 33.5 C56
XL + 41 34 C58
2XL 42 34 C60
2XL + 44 34.5 C62
3XL 45 34.5 C64
For Knee Pads
see page 33

Fleeces & Bodywarmers
Clothing & Workwear
Endurance Unisex Lined Fleece Jacket
310g/m 2 anti-pill fleece, fully lined with microfibre
windproof fabric. Provides extra warmth. Two hip
pockets. Full zip front, drawcord hem
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 342485
Endurance Unisex
Heavyweight Fleece Jacket
380g/m 2 100% polyester anti-pill fabric. Elasticated
cuffs. Full length coloured zip. Two zipped waist-level
pockets. Elasticated pull cords and toggles
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 342482
Endurance Fleece Jacket
2 lower zipped pockets. Elasticated cuff and hem
Size: XS, S, M, L, XL, XXL
Colour: Dark Navy
Code: 305621
Size: S, M, L, XL, XXL
Colour: Black
Code: 305601
NEW
Endurance Highland
Polycotton Bodywarmer
Stud front fastening. Two chest and two lower
(plus access) Velcro ® pockets. 3" extra tail at rear
• Size: S, M, L, XL, XXL
• Colour: Navy
Code: 015064
Helly Hansen Eagle Lake Fleece Jacket
100% Polyester - 160 g/m². Brushed Tricot in neck
for comfort. Chin Guard. No shoulder seams. Elastic
edgeband at sleeves. Centre front zip, chest pocket
and two hand pockets with YKK ® zippers. Draw cord
adjustment at hem. Zip in compatible
• Size: S, M, L, XL, XXL
Colour: Black
Code: 430838 Manufacturer’s code: 72085-990
Colour: Royal Blue
Code: 430839 Manufacturer’s code: 72085-530
Colour: Grey
Code: 430840 Manufacturer’s code: 72085-970
Colour: Orange
Code: 430841 Manufacturer’s code: 72085-290
Helly Hansen Red Lake Fleece Jacket
EN 14058 CL 1 Cold protection norm. 100% Polyester
- 320 g/m². Front zipper. Two pockets at front with
zippers. Elastic cuffs. Optional as zip-in jacket
• Size: S, M, L, XL, XXL, XXXL, XXXXL
Colour: Black
Manufacturer’s code: 72065-990
Code: 430850
Colour: Navy Blue
Manufacturer’s code: 72065-590
Code: 430851
Each
Each
25

Clothing & Workwear
Jackets
Helly Hansen Bergholm Insulated Jacket
100% Polyester - 197 g/m². 100% Polyester -350g/m²
Fleece insulation. 80g padding in arms. Zipper for entry
inside garment for logo applications. ID-Card loop
• Size: S, M, L, XL, XXL, XXXL, XXXXL
Colour: Black
Manufacturer’s code: 76211-990
Code: 430842
Colour: Navy Blue
Manufacturer’s code: 76211-590
Code: 430843
Colour: Grey
Manufacturer’s code: 76211-970
Code: 430844
Helly Hansen Berg Insulated Jacket
Insulation: 100% Polyester - 160 g/m² in body,
120 g/m² in sleeves. Reflective elements.
Detachable hood. Zipper for entry inside garment
for logo applications. ID-Card loop
• Size: S, M, L, XL, XXL, XXXL, XXXXL
Colour: Black
Manufacturer’s code: 76201-990
Code: 430845
Colour: Black/Grey
Manufacturer’s code: 76201-979
Code: 430846
Colour: Black/Red
Manufacturer’s code: 76201- 130
Code: 430847
Helly Hansen Madrid Softshell Jacket
100% Polyester - 327 g/m². Softshell, fleece inside.
Two pockets at front with zippers. Chest pocket with
zipper. Two large inner pockets. Elastic at hem and cuffs
• Size: S, M, L, XL, XXL, XXXL
• Colour: Black
Manufacturer’s code: 74002-990
Code: 430848
26
Helly Hansen Barcelona Softshell Jacket
Face: 95% Polyester, 5% Elastane - 320 g/m². Back:
100% polyester. Softshell, fleece inside. Reflective
elements. Water repellent front zipper with inner placket
• Size: S, M, L, XL, XXL, XXXL
• Colour: Black
Manufacturer’s code: 74008-990
Code: 430849
Helly Hansen Vigo Softshell Jacket
100% Polyester - 327 g/m². Softshell, fleece inside.
No shoulder seams. Water repellent front zipper with
inner placket. Elastic cuffs
• Size: S, M, L, XL, XXL, XXXL, XXXXL
• Colour: Black
Manufacturer’s code: 74020-990
Code: 430852
Endurance Water Repellent
Softshell Jacket
Two lower zipped pockets. One zipped upper pocket
• Size: S, M, L, XL, XXL
Colour: Navy Blue Code: 439587
Colour: Black Code: 439570

Coverall & Bib & Brace
Clothing & Workwear
Endurance Cotton Drill Stud Coveralls
100% cotton.Traditionally styled. Concealed stud
front fastening. Elasticated back. Two side swing (plus
access), breast, and rule pockets
• Colour: Navy Blue
• Size: XS, S, M, L, XL, XXL
Code: 371004
Endurance Polycotton Stud Coveralls
Polycotton, for multiple washing – less shrinkage, holds
colour well. Traditionally styled. Concealed stud front
fastening. Two stud-fasten breast, two side swing (plus
access), and rule pockets
• Size: S, M, L, XL, XXL
• Length: Regular Leg
• Colour: Navy Blue
Code: 371203
Endurance Polycotton Zip Front Coverall
Polycotton coverall. Knee pad pockets. Zipped chest
pockets. 2 swing pockets with side access. Full
elasticated back. Action back. Back pockets
• Chest: S, M, L, XL, XXL
• Size: 36-50" Waist
• Length: Regular Leg 30"
Colour: Royal Blue
Code: 380025
Colour: Navy Blue
Code: 380024
Helly Hansen
Sheffield Suit
EN ISO 15797
Polycotton 245g, 65%
Polyester, 35% Cotton. Front
zipper with flap. Two chest
pockets, one with cellphone
pocket. Two hand pockets
with access to the inside.
Ruler pocket. Knee pad
pockets accessible from the
inside. Fold at bottom hem
gives option to extend leg
length by 5cm
Colour: Black
Size: XS - 3XL
Code: 430863
Manufacturer’s code:
76667-990
Colour: Black/Royal Blue
Size: XS - 3XL
Code: 430865
Manufacturer’s code:
76667-559
Colour: Black/Grey
Size: XS - 3XL
Code: 430866
Manufacturer’s code:
76667-979
NEW
Endurance Bib & Brace
Hard wearing bib and brace. 80/20
polycotton. Front bib pocket. Large
front waist pocket with button
closure. Button closure at fly.
Elasticated waist
• Size: S, M, L, XL
Colour: Navy
Code: 371020
Colour: White
Code: 371021
See size chart on page 24
27

Clothing & Workwear
Ladies Workwear
Ladies Coolviz High-Visibility
Polo Shirt
130gm 100% Polyester Birdseye. Mesh ventilated under
arms and side seams. Segmented reflective tape. 3
Button placket with contrast fuchsia lining. Split hem
design
• Size: S, M, L, XL, XXL
• Colour: Saturn Yellow
Code: 014207
NEW
Ladies High-Visibility
Combat Trouser
280gm polyester/cotton with stain-repellent finish.
Specifically designed for the female wearer. Triple
stitched inner and outer leg seams. Cargo style thigh
pockets. Part elasticated waist
• Size: Ladies’ size 8-26
• Colour: Saturn Yellow
Code: 015348 – Short
Code: 015347 – Regular
Code: 015349 – Tall
KeepSAFE Pro Ladies Executive
Sleeveless Waistcoat
CONFORMS TO EN ISO 20471.
Zipped front. ID pocket. Women’s fit. Shaping at
hem for easy access to trouser pocket
• Size: S-XL
Colour: Saturn yellow
Code: 305289
Colour: High Visibility Orange
Code: 015213
NEW
28
KeepSAFE Pro Ladies’ Executive Long Sleeved Waistcoat
CONFORMS TO EN ISO 20471 XS-M CLASS 2/L-6XL CLASS 3
Zipped front. ID pocket. Women’s fit. Shaping at hem
for easy access to trouser pocket
• Size: S-XL
Colour: Saturn yellow
Code: 015214
Colour: High Visibility Orange
Code: 015217
KeepSAFE Ladies EN 471
High Visibility Safety Jacket
PU coated breathable waterproof fabric, with collar-concealed hood.
Rear side vents. Two outer, two internal, and map pockets
• Size: 8, 10, 12, 14, 16
• Colour: Saturn Yellow
Code: 321157
3
2
EN 471:
2003 +A1:2007
EN 343
FABRIC ONLY

Ladies Workwear
Clothing & Workwear
Endurance Ladies Polycotton Polo Shirt
Contemporary ladies cut. Knitted collar, open hem sleeve, side vents.
50% polyester, 50% cotton 220g/m 2
• Size: S, M, L, XL, XXL
Colour: Navy Blue
Code: 362183
Colour: Red
Code: 012196
Unisex Heavyweight Fleece Jacket
Classic and substantial; 380g/m 2 anti-pill polyester. Elasticated cuffs. Full length
coloured zip. Two zipped waist pockets. Elasticated pull cords and toggles
• Size: S, M, L, XL, XXL
• Colour: Navy Blue
Code: 342482
NEW
Endurance Action Ladies Trousers
Part elasticated, button fastening waistband.
Knee patches. Multi-pocketed. Action Trouser
in Women’s fit
• Length: Regular Leg (29")
Size: Ladies 10-18
Colour: Black
Code: 320263
Size: Ladies 10-20
Colour: Navy Blue
Code: 320245
Endurance Pro Women's Softshell Jacket
Bonded stretch 100% polyester fabric, wind resistant and water repellent.
2 zipped side pockets. Elastic/stopper at hemline. Stand up collar.
Raglan sleeve for improved female fit
• Size: 8, 10, 12, 14, 16, 18
• Colour: Black
Code: 018558
29

Clothing & Workwear
Weatherwear
NEW
Endurance
Rainmaster Two-Piece Suit
Double coated PVC on polyester. Welded main
seams. Draw string hood. Two flapped patch pockets.
Elasticated waist trousers. Stud fastening ankle
• Size: M, L, XL, XXL
• Colour: Yellow
Code: 342401
Endurance Thermals
Manufactured in poly-viscose for
warmth, softness, comfort and durability – ideal
for cold conditions indoors or out. Soft brushed
inner. Machine washable. 50% polyester,
50% viscose
• Size: S, M, L, XL, XXL
• Colour: Blue
Vest Long Sleeved Code: 384287
Vest Short Sleeved Code: 384285
Long Johns Code: 384289
Endurance
Bib & Brace Overall
CONFORMS TO EN343
Wide elasticated braces. Stud adjustable waist and
ankles
• Size: M, L, XL, XXL
• Colour: Yellow
Code: 342440
Flexothane ® Classic
Waterproof Jacket
CONFORMS TO EN 343 CLASS 3-2 & EN 340 4820
Fold-away hood in collar. Zip and stud closure. Stud/
elastic sleeve narrowing. Underarm ventilation. Two
patched pockets
• Size: S, M, L, XL, XXL
Colour: Yellow
Code: 343539
Colour: Navy Blue
Code: 343570
Colour: Green
Code: 343526
30
Flexothane ® Classic
Waterproof Trousers
CONFORMS TO EN 343 CLASS 3-2 4500
Elasticated waist. Ankle stud adjustment
• Size: S, M, L, XL, XXL
Colour: Yellow
Code: 343562
Colour: Navy Blue
Code: 343571
Colour: Green
Code: 343528

Weatherwear
Endurance Jacket
CONFORMS TO EN 343
Drawcord hood zip, studded storm flap. Two front patch
pockets
• Size: M, L, XL, XXL
• Colour: Yellow
Code: 342461
Clothing & Workwear
Endurance Trousers
CONFORMS TO EN 343
Elasticated waist
• Size: S, M, L, XL, XXL
• Colour: Yellow
Code: 342413
Flexothane ® Classic
Waterproof Coverall
CONFORMS TO EN 343 CLASS 3-1, EN 340,
EN 14605 TYPE 4, & TESTED TO EN 14786 4964
Fold-away hood in collar. Zip under double flap, stud
closure. Elasticated back, wind cuffs. Ankle stud
adjustment
• Size: S, M, L, XL, XXL
Colour: Saturn Yellow
Code: 343609
Colour: Orange
Code: 343622
Colour: Royal Blue
Code: 015457
Ansell ACTIVARMR Glove 97-011
2 ply approach keeps yours hands warm in cold
conditions while keeping the entire system breathable.
3/4 nitrile dip provides protection from direct wind, liquid
and cold impact. Sandy nitrile finish ensures secure grip
in multiple applications. Soft inner layer of acrylic terry
and the nitrile coating provides comfort and dexterity. A
contrasting black coating against the bright orange liner
offers extra visibility in low or poor light conditions
• Size: 8-11
• Colour: Black/Orange
Code: 304425
EN 511
010
EN 388:2003
4232
Endurance Coverall
CONFORMS TO EN343
Drawcord hood zip, studded storm flap
• Size: M, L, XL, XXL
Colour: Royal Blue
Code: 342425
Colour: Yellow
Code: 342428
31

Clothing & Workwear
Weatherwear
KeepSAFE Hi Vis Latex
Crinkle Finish Glove
Designed to protect up to -30°C/-85°F. The
glove combines excellent thermal qualities,
comfort and high visibility. Latex crinkle
coating on palm. Good grip in wet and dry
conditions. Seamless liner for comfort. Ideal
for winter conditions. Fleece liner keeps
hands warm. Uncoated back allows the hand
to breathe
• Size: 9 - 10
• Colour: Orange
• Cartons of 12
020 1231
Code: 433353Pair
KeepSAFE Hi-Vis Latex
Coated Glove
CONFORMS TO EN 388
Seamless high visibility cotton/acrylic base
for warmth. Latex coating gives maximum
grip in wet and dry conditions. Excellent for
low light work environment
• Size: 8 - 10
• Colour: Saturn Yellow/Black
• Cartons of 12
020
1231
Code: 303001Pair
Endurance Rainmaster
Lightweight Trousers
Lightweight, waterproof polyester/PVC.
Taped seams, elasticated waist
• Size: M, L, XL, XXL
• Colour: Navy Blue
Code: 342430
32
Endurance Rainmaster
Lightweight Two-Piece Suit
Lightweight, waterproof polyester/PVC. Taped seams, mesh
vented back. Hood folds away into collar. Two front pockets
• Cartons of 10
• Size: S, M, L, XL, XXL
Colour: Navy Blue
Code: 342420
Colour: Saturn Yellow
Code: 342421
Skytec Argon Cold
Weather Glove
Double insulated nylon liner with HPT foam ¾ coating.
Durable and flexible to -50°C. Provides thermal
protection from cold and wintery conditions. ¾ dipped
for added weather repellence, making it the ideal cold
weather mechanical handling glove. HPT foam coating
extends across the palm, knuckles and fingers. Soft
lining. Secure grip. Encapsulated air molecules
provide an inherent cushioning effect. Silicone-free
• Size: 7-10
• Colour: Black
• Cartons of 12
02X
3232
Code: 304402Pair

Knee Pads
Continuous pressure on the knee due to working in a kneeling position may lead to chronic conditions, such as bursitis
injuries to the cartilage. As well as helping prevent cumulative trauma, knee pads help protect against injuries and
inflammation caused by hard surfaces, pieces of gravel, and similar objects on the ground.
Clothing & Workwear
Knee Pads
For use with Tuf Revolution and
Endurance Knee Pad Trousers
• Colour: Black
Code: 292208Pair
NEW
Premium Hard Shell Knee Pads
Long-term protection from cumulative trauma injuries.
Hinged action hard shell, ribbed flat kneeling surface.
Premium moulded foam. Breathable. Coolmax ® inner
lining. Dual elastic straps, hook and loop closure
Manufacturer’s code: 825-00
Code: 292205Pair
NEW
Rubber Knee Pad
Protection from abrasion and cumulative trauma; great
for heavy duty industrial and construction applications
and wet environments. Anti-slip ribbed surface. Easy on/
off replaceable 1" rubber strap/plastic buttons
Manufacturer’s code: 885-00
Code: 292221Pair
Heavy Duty Knee Pads
Soft, lightweight protection for all-day comfort. Moulded from toxin free
premium foam. Breathable Coolmax ® inner lining. Single, replaceable elastic
strap; hook and loop closure
• Size: One size fits all
Manufacturer’s code: 840-00
Code: 292206Pair
Endurance Gel Knee Pads
Hook and loop fastener. Elastic adjustable strap
• Colour: Black
Code: 432206Pair
33

Hand Protection
Buying Guide
Health & safety for
your hands
Hands at work are extremely vulnerable to
a wide range of hazards which include cuts,
blows, chemical attack and temperature
extremes. With industry’s increasingly
complex and sensitive manufacturing and
handling processes, there is a growing
insistence on the use of “job fitted” gloves
that meet each user’s specific requirements;
hence our offering of a wider and more
comprehensive range of gloves in this
section – in excess of 200 different types
and styles from which to choose.
Safety standards symbols
and what they each
represent
What to look out for
Each glove has its own individual rating for
each standard it qualifies for. Against each
product there will be a prominent ‘standards
box’ (as per the example shown on the
right) clearly displaying the particular safety
standards that the glove complies with.
This will help you quickly see what you need
to know about the glove, helping you shop
more efficiently.
Choose the right hand
protection
European Standards
Implies that the gloves comply with the
basic requirements laid down by the EEC
directive: Personal Protective Equipment.
Simple Design (Category I)
For areas of ‘minimal risk’ where the effects
of not wearing a glove are easily reversible
or superficial. Such products are selfcertified.
Intermediate Design (Category II)
For areas of specific risk i.e. mechanical
risks. Such products will have been EC type
tested against European test methods and
certified by a notified body.
Complex Design (Category III)
For areas/applications that can seriously or
irreversibly harm the health. Such products,
in addition to the CE type test, will also
have to be either produced under an
approved quality system OR be type tested
on an annual basis.
What the symbols represent
EN 388 – This standard applies to all kinds of protective gloves giving
protection from mechanical risks, in respect of physical problems caused
by abrasion, blade cut, tearing or puncture. This standard also covers risk
of electrostatic discharge.
EN 374 – This standard specifies the capability of gloves to protect the
user against chemicals and/or micro-organisms.
Chemical resistant – The 3 letter code applies to the chemicals it is
resistant to.
Low chemical resistance to unspecified chemicals.
EN 511 – This standard applies to gloves which protect the hands
against convective and contact cold.
EN 407 – This standard specifies thermal performance for protective
gloves against heat and/or fire.
EN 659 – This standard defines performance requirements for gloves
designed to protect fire fighters against heat and flames.
EN 421 – This standard lays down test methods and performance
criteria for gloves offering protection against ionising radiation and
radioactive contamination.
EN 455 – Medical gloves for single use.
If a glove is to be used for food handling, it is required to carry either the
words ‘for food use’ or this symbol.
Mechanical Hazards: EN 388
Performance Level
(a) Abrasion resistance 0-4
(b) Blade-cut resistance 0-5
(c) Tear resistance 0-4
(d) Puncture resistance 0-4
The same method applies to these two standards below also.
Thermal Hazards: EN 407
Performance Level
(a) Burning behaviour 0-4
(b) Contact heat 0-4
(c) Convective heat 0-4
(d) Radiant heat 0-4
(e) Small splashes of molten metal 0-4
(f) Large splashes of molten metal 0-4
Contact Heat
A sample is taken from the palm area of a glove. The outside of the glove is put
on a hot surface and the temperature of the inside of the glove is then monitored.
The temperature on the inside of the glove must take 15 seconds or more to rise
by 10°C from room temperature.
EN 407 Performance
Level
3443
A B C D
Contact
Temperature °C
1 100 >15
2 250 >15
3 350 >15
4 500 >15
Threshold Time
Seconds
EN 511: Cold
Performance Level
(a) Resistance to convection cold 0-4
(b) Resistance to contact cold 0-4
(c) Permeability to water 0-1
TAKE NOTE...
CHANGES ARE
BEING MADE
CHANGES TO STANDARD EN 388
During the second half of 2016, a new version of EN 388,
the mechanical hazards standard was published. It will
allow products offering higher levels of cut levels to be
identified.
What changed
Any sample tested for cut resistance using the existing
coup method, which blunts the blade used in the test, will
have to be additionally tested using the ISO cut method.
There will be 6 cut levels defined on the ISO cut method.
Levels A, B and C are new. Level D is of a different value to
the level previously quoted as 4. Level E is the same value
previously quoted as level 5. Level F is also new and is the
highest cut resistance value.
LEVEL
A
LEVEL
B
LEVEL
C
LEVEL
D
LEVEL
E
LEVEL
F
2 5 10 15 22 30
Back of hand protection (impact protection testing) is now
included.
3 means the sample achieved level 3 for abrasion
4 means the sample achieved level 4 for coup cut
4 means the sample achieved
level 4 for tear
3 means the sample achieved
level 3 puncture
E means the sample achieved
level E for ISO cut which was
3443EP tested due to blade blunting
during the coup test
P means the sample passes requirements for impact
protection
What it means to you
• This change only affects new products being certified
once the standard has been published
• As with any new PPE standard, it does not apply
retrospectively
• Over the next few years, you will see more and more
products carrying this standard
• It will allow products offering higher levels of cut
protection to be identified
• EN420: General requirements for Protective Gloves –
New Test Method being added (prEN 16778) for the
determination of the presence of Dimethylformamide
(DMF), a toxic ingredient of insecticide sometimes used in
the leather tanning process
• prEN374-1: Mandatory Challenge Chemicals increased to
18 from 12 & Creation of 3 levels of Permeation Testing,
i.e. Type A gloves (Must pass on 6 Challenge chemicals),
Type B Gloves (3 Challenge Chemicals) & Type C Gloves
(1 Challenge chemical)
• EN374-2: Claims for micro-organism resistance must
now satisfy EN374-5. If virus protection is claimed, it
must pass ISO 16604
(EN374-2 for bacteria & fungi)
• EN374-3: Permeation of pesticides now included and the
Standard for this hazard will now fall under EN16523-1
• EN374-4: Determination of Resistance to Degradation
determined by measuring the permeation resistance
before and after 60 mins. exposure to a chemical.
Degradation results must be included in the User
Information for those chemicals which correspond to the
letters under the pictogram
34

Hand Protection
Hand Protection
35

Hand Protection
Lightweight & PU Coated Gloves
Polyurethane coating is a flexible, synthetic material that helps protect hands from harmful residues and chemicals
while providing excellent grip, tactile sensitivity and abrasion resistance.
Applications include hi-tech, electronic, small parts assembly, automotive sub-assembly, light fabrication,
micro-engineering, packaging, inspection, light industrial, horticulture, and general plant use.
ALL THESE GLOVES CONFORM TO EN 388 INTERMEDIATE DESIGN
NEW
Polyco Matrix P Grip PU
Coated Glove
Seamless knitted liner with polyurethane palm coating.
Open back style allows the hands to breathe, keep
cool and comfortable. Close fitting design for maximum
dexterity
• Size: 6-11
• Colour: Black
3131X
Manufacturer’s code: 400/1-5 MAT
Code: 303183
Pair
Ansell SensiLite Hyflex ® 48-102
PU Palm Coated Glove
Glove knitted with a seamless non-stop process. Textile
liner made of high-tenacity polyamid yarn. Fine and
stretchable stitches for an excellent comfort. Stretchable
palm fit polyurethane coating. Good abrasion resistance.
Low lint glove
• Size: 6-11
• Colour: Grey
4121
Manufacturer’s code: 48-102
Code: 430745
Pair
Ansell EDGE ® GLOVES 48-140
For industrial work requiring electrostatic
dissipative materials as per EN 1149, providing
a comfortable glove at a reasonable price
APPLICATIONS: Assembly of dashboard, cables
and wires. Assembly of electronic components
and mother boards. Handling compact discs,
assembly and repair work in electronics and
telecommunications. PU palm coated
• Size: 6 - 11
• Colour: White
Manufacturer’s code: 48-140
Code: 432488
3121
Pair
Ansell Hyflex ® 11-618 PU
Palm Coated Glove
Nylon with PU and 18-gauge knitting
technology, ultra-thin glove for most
delicate handling. Ideal for workers
who need a high level of touch
and precision
• Size: 6-11
• Colour: Blue
Manufacturer’s code: 11-618
Code: 304591
3121X
Pair
Skytec Ninja Lite
Ultra lightweight (18gg). Protects the
hand from oils, grease and abrasion, with
effective grip. Ideal for intricate tasks and
for preventing product contamination.
Maximum flexibility and movement for
the most intricate of tasks. Breathable,
seamless liner. Elasticated wrist provides
a secure and comfortable fit.
Lint free, reducing the risk
of product contamination
• Size: 8-10
• Colour: Blue
Code: 303265
4131
Pair
KeepSAFE PU Coated Glove
Ideal for packing, inspection, fine
component assembly, delicate and
precise operations. Excellent levels
of dexterity. Seamless liner – no seams
against worker’s hand
• Size: 7-10
• Cartons of 12
Colour: Grey
Code: 303052
Size: 8-10 Colour: Black
Code: 303055
4121
Pair
Pair
Honeywell Perfect Poly
PU Coated Glove
Ideal for automotive assembly and fine
component handling. Excellent dexterity,
strong abrasion. Lightweight polyamide
knitted glove. 15 gauge
• Size: 6-10
• Colour: Black/Grey
• Cartons of 10
4121
Manufacturer’s code: 2400251
Code: 303064
Pair
36

Nitrile Coated Gloves
Durable synthetic rubber (Nitrile) provides excellent cut, slash, snag, puncture and abrasion resistance, while offering
superior dexterity and grip; suitable for parts assembly or handling, automotive assembly or repair, and oil refineries.
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Hand Protection
Juba ® Smart Tip Nylon ® with Foam Nitrile Coated Glove
H4120 - SMART TIP technology allows handling touch screens using the index,
thumb and middle finger while keeping the glove on. Light and flexible. Very
ergonomic, seamless glove. Nitrile technology gives breathability. Provides good
grip in oily conditions
• Size: 7-10
• Colour: Orange/Black
• Cartons of 10
Code: 304422 Manufacturer’s code: H4120 Pair
3121
Ansell Hyflex ® 11-818 Nitrile Foam Coated Glove
Ultra-thin FORTIX nitrile foam coating lasts up to three
times longer than comparable coatings and provides enhanced dry grip,
fingertip sensitivity. Seamless 18-gauge nylon-spandex liner
• Size: 8-10
• Colour: Blue
3121A
Code: 304598 Manufacturer’s code: 11-818 Pair
KeepSAFE Nitrile Coated Knitted Glove
For light handling, or where high degree of dexterity required
• Size: 8-10
• Cartons of 12
Colour: Grey
Code: 303029
Colour: Black
Code: 304061
4121
Pair
Pair
Honeywell Polytril Mix Nitrile Coated Glove
Knitted polyamide/cotton – comfort and effective properties against cuts.
Outstanding abrasion resistance. Impermeability to oils. Rough nitrile coating
• Size: 6-10
• Colour: Black
• Cartons of 10
4232
Code: 303163 Manufacturer’s code: 2232233 Pair
37

Hand Protection
Nitrile Coated Gloves
Durable synthetic rubber (Nitrile) provides excellent cut, slash, snag, puncture and abrasion resistance, while offering
superior dexterity and grip; suitable for parts assembly or handling, automotive assembly or repair, and oil refineries.
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Juba ® Eco-Nit Nitrile Coated Glove
Excellent mechanical protection and dexterity. High
resistance to abrasion. Comfortable, secure handling
• Size: 8-10
• Colour: Grey/Black
• Cartons of 10
4121
Code: 304494 Manufacturer’s code: 115-151 Pair
SHOWA 265R Assembly Grip Nitrile Palm
Coated Glove
Lightweight and resistant to deformation. Protects from
oils, hydrocarbons, grease and abrasion, with effective
grip. Designed for easy movement and continuous wear.
Seamless liner prevents irritation
• Size: 6-9
• Colour: Grey
4131
Code: 304416 Manufacturer’s code: 265R Pair
Ansell Hycron Fully Coated
Knitwrist Glove
Made for heavy-duty jobs involving rough, abrasive
materials. Heavy-duty nitrile coating provides excellent
dry grip as well as superior performance when handling
rough, abrasive materials. Excellent resistance to snags,
punctures, abrasions, cuts, greases and oils. Antistatic
to EN1149
• Sizes: 8-10
• Colour: Blue
4221
Code: 304601 Manufacturer’s code: 27-602 Pair
38
Ansell Hyflex ® 11-926 ¾ Dipped Nitrile
Dual Performance Glove
Nitrile/Neoprene Blend Under Coating with GRIP
Technology. Features Ansell’s proprietary grip
technology. Liner is constructed with fine gauge nylon/
spandex yarn. Enhanced flexibility, tactility, oil grip and
extreme comfort
• Size: 6-11
• Colour: Purple
4121A
Code: 304806 Manufacturer’s code: 11-926 Pair
SHOWA 370 Palm Fit Assembly Grip
Nitrile Coated Glove
Lightweight and resistant to deformation. Protects from
oils, grease and abrasion, with effective grip. Ideal for
precision assembly tasks. Breathable back of hand
to reduce perspiration. Antibacterial and anti-odour
treatment
• Seamless liner prevents irritation
• Size: 5-10
• Colour: White
Code: 304417 Manufacturer’s code: 370 Pair
Honeywell Nitrifit Fully
Coated Glove
Increased water resistance – fully nitrile coated. 15
gauge knitted nylon
• Size: 7 -10
• Colour: Black
• Cartons of 10
3131 4121
Code: 303156 Manufacturer’s code: 2232236 Pair

Nitrile Coated Gloves
Coated for Wet & Dry Grip
ALL CONFORMS TO EN388 INTERMEDIATE DESIGN
Hand Protection
Showa 377 Nitrile Foam Coated Glove
377- Fully nitrile coated nylon liner helps prevent any liquid penetration.
Exceptional anatomical shape facilitates movement. Unique foam coating for grip.
Ideal for assembly work
• Size: 6-10
• Colour: Blue/Black
Code: 304597 Manufacturer’s code: 377 Pair
4121
Showa 380 Nitrile Foam Coated Glove
380- Revolutionary compressed and embossed Foam Grip. Works in both wet and
dry environments. Extended absorption capacity. Seamless nylon liner. For assembly,
automotive, inspections, light fabrication, maintenance, material handling, mechanical,
packaging, tool handling
• Size: 6-9
• Colour: Blue/Black
3121
Code: 303214 Manufacturer’s code: 380 Pair
Ansell Hyflex ® 11-840 Breathable Foam Nitrile Glove
Extreme durability and superior fit for precision handling
in abrasive applications. Tough 1.1mm FORTEX ® nitrile foam coating. Second-skin
liner for more comfort, cooler, drier hands. Silicone-free material
• Size: 6-11
• Colour: Black/Grey
4131A
Code: 304600 Manufacturer’s code: 11-840 Pair
Ansell Hyflex ® 11-800 Nitrile Foam Coated Glove
Micro-porous nitrile coating on a seamless liner for delicate, precise
handling – packaging, automotive, electronics. Antistatic to EN1149
• Size: 6-10
3131A
Colour: 11-800 White/Grey
Code: 304585 Manufacturer’s code: 11-800 Pair
Colour: 11-800 Grey/Black
Code: 304594 Manufacturer’s code: 11-801 Pair
39

Hand Protection
Nitrile Coated Gloves
Providing excellent grip in oily or greasy applications, air infused nitrile coating absorbs oils better than flat coating,
while maintaining the latter’s cut, tear and abrasion resistance. Ideal for dry or slightly oily applications that require light
mechanical protection and high levels of handling finesse, foam gloves are well-suited to light assembly applications
(automotive, plastics, textiles, finished goods) as well as logistics and warehousing.
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
KeepSAFE T-Touch Water Based PU & NBR Foam Glove
Environmentally friendly – manufactured using water instead of harmful solvents (DMF). High flexibility and dexterity.
Excellent wet and dry grip. Nylon/spandex lining – outstanding comfort, breathability. Excellent performance in oily
and greasy applications
• Size: 8-10
• Colour: Red/Black
• Cartons of 12
Code: 304021
Pair
Juba ® Agility Nitrile Foam
Coated Glove
Nitrile dots finish to improve grip. Foamed nitrile
channels oils and liquids away from surface. Superb wet
grip. Outstanding abrasion resistance.
• Size: 8 - 10
• Colour: Black/Red Dots
4131 4121
Code: 303082 Manufacturer’s code: 5112 Pair
40
Ansell Hyflex ® 11-925 ¾ Dipped
Coated Nitrile Ultra-Light Glove
First ultra-lightweight HyFlex ® style to combine a ¾ dip
geometry, oil repellence and oil grip. Spandex Nylon
material with ¾ dipped foam. Features Ansell Grip
Technology, providing reduced risk of slippage in
dynamic environments
• Size: 6-11
• Colour: Blue
3111
Code: 304688 Manufacturer’s code: 11-925 Pair
Juba ® Econit Nitrile Foam
Coated Glove
Excellent grip in dry, wet and oily conditions. Nitrile foam
channels oils and liquids away from surface. 15 gauge
Nylon & Lycra liner for maximum
ergonomy. Excellent resistance to abrasion
• Size: 7-11
• Colour: Red/Black
Code: 303188 Manufacturer’s code: 111801 Pair
KeepSAFE Nitrile Foam
Coated Glove
Excellent grip in wet, oily or dry conditions. Seamless
nylon liner, exceptional dexterity and sensitivity
• Size: 7-10
• Colour: Grey/Brown
4132 4121
Code: 303008
Pair

Nitrile Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Hand Protection
Ansell Hycron ® 27-600 Nitrile
Coated Glove
A big tough glove for a rough, tough life: three times
more durable than heavy-duty leather. Superior
resistance to sharp and abrasive materials. Stronger
and more flexible than PVC. Excellent barrier to
grease and oil. Made without silicone.
Antistatic to EN1149
• Size: 8-10
Code: 304606
Manufacturer’s code: 27-600 Pair
Ansell Easy Flex ® 47-200 Nitrile
Coated Glove
The coolness and comfort of cotton - but with far
superior grip. Makes it easier and safer to handle
smooth objects like boxes or appliances. Coating only on
fingers and palm. Nitrile coating repels oil and grease.
Antistatic to EN1149
• Size: 7-10
• Colour: Green
4221 2111A
Code: 304683 Manufacturer’s code: 47-200 Pair
Ansell Hynit ® 32-105 Nitrile Fully
Coated Glove
Liquid repellent. Excellent protection against
abrasions and low cuts. Remarkable flexibility.
Interlock knit liner.
Length: (7-7½) 215mm, (8-0) 235mm
• Size: 7-10
Code: 304640
3111A
Manufacturer’s code: 32-105 Pair
KeepSAFE Nitrile Fully Coated
Knitwrist Glove
Cotton jersey liner, knitwrist,ideal for construction, street
cleaning/refuse collection and fishing industry
• Size: 7-10
• Colour: Blue
Code: 303033
Pair
KeepSAFE Lightweight Nitrile
Fully Coated Glove
Lightweight nitrile. Interlock cotton liner, knitwrist. Ideal
for manufacturing and cleaning industries
• Size: 8 -10
• Colour: Yellow
Code: 303039
Pair
KeepSAFE Lightweight Nitrile
Coated Glove
Open back lightweight nitrile. Interlock cotton liner and
knitwrist. Ideal for industrial tasks, general handling
• Size: 8-10
• Colour: Yellow
4111 3111 3111
Code: 303038
Pair
41

Hand Protection
Grip It Oil Gloves
Polyco Grip It Oil Glove Cut 1
Liner is made from a combination of HPPE (high
performance polyethylene) and glass fibre offering good
resistance to mechanical hazards. Two layers of
nitrile coating to provide ultimate protection and gripping
ability. The first layer which is a full coating, is soft and
resilient allowing for excellent dexterity. The second
layer which is a palm coating, is infused with microfoam
bubbles increasing resistance to oils and maximising
grip, especially in wet and oily
conditions
• Size: 7-11
• Colour: Orange/Black
4122X
Code: 303244 Manufacturer’s code: GIO Pair
Polyco Grip It Oil Gauntlet Cut 1
Two layers of nitrile coating to provide ultimate
grip,abrasion protection and durability. The
palm coating is infused with microfoam bubbles
increasing resistance to oils and maximising grip
in wet and oily handling environments. Good
protection against a wide range of chemicals,
including strong detergents, oils and certain
solvents.Tested in accordance with European
standard EN1186 making it suitable for food
contact
• Size: 8-11
• Colour: Blue/Black
4121X
Code: 303245 Manufacturer’s code: GIOG1 Pair
Polyco Grip It Oil Therm Cut 1
Liner is made from a combination of HPPE (high
performance polyethylene) and glass fibre offering
good resistance to mechanical hazards. Two layers
of nitrile coating to provide ultimate protection and
gripping ability. The first layer which is a full coating,
is soft and resilient allowing for excellent dexterity. The
second layer which is a palm coating, is infused with
microfoam bubbles increasing resistance to oils
and maximising grip, especially in wet
and oily conditions
• Size: 7-11
• Colour: Yellow/Black
4122X
Code: 303246 Manufacturer’s code: GIOTH Pair
Polyco Grip It Oil Glove
Cut 3
Liner is made from a combination of
HPPE (high performance polyethylene)
and glass fibre offering good resistance
to mechanical hazards. Two layers
of nitrile coating to provide ultimate
protection and gripping ability. The
first layer which is a full coating, is
soft and resilient allowing for excellent
dexterity. The second layer which is a
palm coating, is infused with microfoam
bubbles increasing resistance to oils and
maximising grip, especially in wet and
oily conditions
• Size: 7-11
• Colour: Orange/Black
4X43B
Polyco Grip It Oil Therm
Glove Cut 5
Made from a combination of HPPE (high
performance polyethylene) and glass fibre,
the liner attains maximum EN388 scores in
all categories. Two layers of nitrile coating
to provide ultimate gripping ability and the
highest level of abrasion resistance. The
first layer is a full coating and is liquid
resistant. The second layer coats the palm
of the glove and incorporates microfoam
bubbles, which increase resistance
to oil and maximise grip in wet and
greasy conditions. Fleecy Liner: Provides
exceptional warmth and comfort
• Size: 7-11
• Colour: Blue/Black
4X43D
Polyco Grip It Oil Gauntlet
Cut 5
Granulated foam slip-resistant PVC
coating is especially competent in
oily conditions. Kevlar ® knitted liner
provides maximum cut protection.
Offers good resistance to a variety
of chemicals including acids, alkalis,
oils and greases. Waterproof dual
PVC coating is highly flexible,
which is maintained even in
cold temperatures. Conforms to
European standard EN407 for
Thermal Hazards
• Size: 8-11
• Colour: Green/Black
4121X
Polyco Grip It Oil Glove
Cut 5
Made from a combination of HPPE
(high performance polyethylene) and
glass fibre, the liner attains maximum
EN388 scores in all categories. Two
layers of nitrile coating to provide
ultimate protection and gripping ability.
The first layer, which is a full coating, is
soft and resilient allowing for excellent
dexterity. The second layer, which is a
palm coating, is infused with microfoam
bubbles increasing resistance to oils and
maximising grip, especially in wet and
oily conditions
• Size: 7-11
• Colour: Yellow/Black
4X43C
Manufacturer’s code: GIOK3
Code: 303243
Pair
Manufacturer’s code: GIOTHK5
Code: 303241
Pair
Manufacturer’s code: GIOG5
Code: 303240
Pair
Manufacturer’s code: GIOK
Code: 303242
Pair
42

Latex Coated Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Skytec Ninja Flex
The seamless lightweight (15gg) liner and latex coating maintain an overall super thin feel for enhanced dexterity,
fit and comfort. For manual handling in damp and dry conditions. Anatomically designed for high levels of comfort
and tactile touch. Elasticated wrist provides a secure fit. Silicone and lint free
• Size: 7-10
• Colour: Red
3131
Code: 304771 Manufacturer’s code: SKY191/2/3/4 Pair
Hand Protection
SHOWA 330 ReGrip
Reinforced grip glove. Double latex coating in the area
of the glove subject to most stress; between thumb
and index finger. Rough latex surface provides a tactile
feel and excellent grip. Maximum resistance to rips.
Seamless liner prevents irritation
• Size: 7-10
• Colour: Grey/Black Palm
2142
Code: 303010 Manufacturer’s code: 330 Pair
Juba ® Grip Latex Coated Glove
Seamless design ensures good ergonomic. Great dry
and wet grip. Strong, durable and hard wearing. Cotton/
polyester knitted liner
• Size: 8-10
• Cartons of 10
3142
Colour: Yellow/Orange Manufacturer’s code: 251
Code: 304152
Colour: Yellow/Green Manufacturer’s code: 251
Code: 304709
Pair
Pair
KeepSAFE Latex Coated Grip Glove
Cotton liner
Excellent value where secure grip is required. Crinkle
latex coating in green or orange. Seamless liner provides
comfort and dexterity
• Size: 8-11
• Cartons of 12
2242
Colour: Orange
Code: 303028Pair
Colour: Green
Code: 303026
Pair
SHOWA 310 Grip Glove Green
Flexible and robust offering excellent dexterity with good
resistance to tearing.
For heavy duty manual handling. Rough latex surface
provides a tactile feel and excellent grip. Breathable
back of hand to reduce perspiration. Seamless liner
prevents irritation
• Size: 7-10
• Colour: Green
4142
SHOWA 310 Orange
Flexible and robust offering excellent dexterity with good
resistance to tearing.
For heavy duty manual handling. Rough latex surface
provides a tactile feel and excellent grip. Breathable
back of hand to reduce perspiration. Seamless liner
prevents irritation
• Size: 8-10
• Colour: Orange
2142
KeepSAFE Fully Coated Latex
Knitwrist Glove
Ideal for a wide range of industrial tasks from assembly
and engineering to refuse collection. Suitable for wet
and dry conditions. Knitted base
• Size: Men’s
• Colour: Yellow
• Cartons of 12
1110
Code: 431145 Manufacturer’s code: 310 Pair
Code: 431146 Manufacturer’s code: 310 Pair
Code: 304077
Pair
43

Hand Protection
General Handling Gloves
Gloves on this page are CE marked to Simple Design (Category 1).
KeepSAFE Pick And Go Glove
CONFORMS TO EN 388 INTERMEDIATE DESIGN
PVC dots on palm, fingers. Polyester. Ideal for sorting and parts handling
• Size: S, M, L, XL
• Colour: White with blue dots
• Cartons of 12
Code: 430864
2031
Pair
Bleached Stockinette Glove
Bleached cotton, fourchette pattern. Reversible
• Cartons of 12
Size: Men’s Code: 304155 Pair
Size: Ladies’ Code: 304156 Pair
Blended Yarn Knitted Glove
Seamless cotton/nylon polyester mix.
Elasticated wrist.
Ambidextrous. Machine washable
• Colour: White
• Cartons of 12
Cotton Stockinette Glove
Standard quality knit wrist
• Size: Men’s
• Cartons of 600
Code: 015036
Pair
Code: 304111
Pair
Criss Cross Glove
Cotton Back-Leather
Palm Glove
Chrome leather palm. Cotton back.
Knitted wrist
• Size: Men’s
• Cartons of 300
CONFORMS TO EN 388 INTERMEDIATE DESIGN
High grip PVC lattice finish.
High levels of dexterity and grip.
Knitted base
• Size: 10
• Colour: Mustard
• Cartons of 12
114X
Code: 304010
Pair
Code: 304076
Pair
44

Rigger Gloves
Hand Protection
KeepSAFE Canadian Rigger Style Yellow
Hide Palm Glove
Full grain cowhide. Safety cuff with vein protection
patch. Palm lined. Elasticated back
• Size: 10
• Cartons of 12
Code: 304014
Pair
KeepSAFE Gold Canadian Rigger Style
Chrome Leather Glove
High quality, shoulder chrome leather. Elasticated back.
Palm lined
• Size: 10
• Cartons of 12
3142 3243
Code: 304072
Pair
KeepSAFE Cowhide Three Piece
Rigger Glove
High quality cowhide palm. Rubberised cuff, vein patch
protection. Palm lined. Cotton back
• Size: 10
• Colour: Black/Yellow
• Cartons of 12
4143
Code: 013428
Pair
KeepSAFE Chrome Leather Red
Cotton Back Rigger Glove
Premier quality chrome split leather. Knuckle and
fingertip protection. Rubberised safety cuff. Palm lined.
Cotton back
• Size: 10
• Colour: Red
• Cartons of 72
4244X
Canadian Rigger Style Split
Leather Glove
Chrome leather. Safety cuff, vein protection
patch. Elasticated back. Palm lined
• Size: Men’s
• Cartons of 120
Code: 304012
Pair
Leather Lined Driving Glove
Yellow cowhide. Elasticated back.
Fully fleece lined. Superior quality
• Cartons of 12
Code: 304033 (Lined)
3112
Pair
Code: 304057
Pair
Code: 304032 (Unlined)
Pair
45

Hand Protection
Work Gloves
NEW
uvex phynomic foam
Second skin fit gives a natural touch. Flexible
construction gives high levels of dexterity and reduces
fatigue. Water repellent – outstanding grip in dry
applications. Dermatologically tested and approved -
ideal for allergy sensitive wearers. Soft breathable liner.
Certificated for the food industry. Certified to Oeko-Tex
Standard 100 - no harmful substances used in the
manufacturing of this glove
• Size: 7-10
• Colour: Grey
Code: 431420 Manufacturer’s code: 60050 Pair
uvex phynomic wet
The phynomic wet coating allows liquids to run off while
light oil is absorbed for high levels of grip in moderate
wet and light oil applications. Exceptional abrasion
resistance for high levels of protection and durability for
more demanding environments. Soft breathable liner
with second skin fit. Flexible construction gives high
levels of dexterity and reduces fatigue. Dermatologically
tested and approved - ideal for allergy sensitive wearers.
Certified to Oeko-Tex Standard 100 - no harmful
substances used in the manufacturing
of this glove
• Size: 7-10
• Colour: Blue
3131 4131
Code: 304044 Manufacturer’s code: 60060 Pair
Ansell EDGE ® GLOVES 48-128
For light applications requiring a good level
of abrasion resistance & grip, as well as high
tactility in dry to slightly oily environments.
Applications: Assembly of small pieces, General
handling, Quality control, Packaging
• Size: 7-10
• Colour: Grey
Manufacturer’s code: 48-128
Code: 432485
4122
Pair
NEW
General Use PVC Gloves & Gauntlets
ALL CONFORM TO EN 388
KeepSAFE
PVC Gauntlet
• Size: 9, 10
• Colour: Red
• Length: 270mm
• Cartons of 12
4121
Code: 303022
Pair
Ansell EDGE ® GLOVES 48-305
Industrial work gloves for medium weight
applications where grip and cushioning are
required. Applications: General handling,
Packing, Shipping and receiving, Refuse
collection
• Size: 8-11
• Colour: Black
Manufacturer’s code: 48-305
Code: 432486
2142
Pair
KeepSAFE PVC Lightweight Glove
Flexible, good sensitivity, and comfortable in use. Good
dry grip. Fully coated knitwrist. Smooth finish. For
general handling
• Size: 8-10
• Colour: Red
• Cartons of 120
Code: 304930
4121
Pair
• Size: 9, 10
• Length: 350mm
• Cartons of 12
Code: 303023
• Size: 10
• Length: 400mm
• Cartons of 60
Code: 303024
• Size: 10
• Length: 450mm
• Cartons of 12
Code: 303025
Pair
Pair
Pair
46

Specialist Handling Gloves
NEW
NEW
Hand Protection
uvex ThornArmor ® 3092 Glove
For handling plants with hazardous thorns and needles. Three layers of
SuperFabric ® * brand material are built into ThornArmor gloves, creating
a highly puncture-resistant palm lining that acts as a barrier between
your hands and sharp thorns and needles
• Size: 6-11
Code: 432050 Manufacturer’s code: 3092 Pair
uvex HexArmor Needlestick 4041 NSR Glove
Needle stick resistant. Neoprene cuff with velcro closure. Silicone pattern
palm grip. Back of hand knuckle padding. Reinforces fingertips. 3 layers
of SuperFabric provide industry leading cut resistance
• Size: 6-11
4523 4X42F
Code: 432051 Manufacturer’s code: 4041 Pair
NEW
NEW
uvex HexArmorThin Lizzie 2090X Glove
Elasticated cuff. Back of hand IR-X Impact Exoskeleton with high flex
design. Sandy nitrile palm offers superior grip and abrasion resistance.
Reinforced thumb crotch patch
• Size: 7-11
Code: 432052 Manufacturer’s code: 2090X Pair
uvex HexArmor Rig Lizard 2030 Glove
Back of hand IR-X Impact Exoskeleton with high flex design.
Durable sythitice leather palm with silicone pattern offers superior grip
and abrasion resistance. Reinforced index finger and thumb saddle
• Size: 7-12
4544XP 4532
Code: 432053 Manufacturer’s code: 2030 Pair
NEW
uvex HexArmor Rig Lizard 2025 Glove
Durable TP-X+ palm with reinforced stitching offers superior wet/dry
grip and abrasion resistance. Back of hand IR-X Impact Exoskeleton
with high flex design. Reinforced index finger and thumb saddle
• Size: 6-11
4544
Code: 432054 Manufacturer’s code: 2025 Pair
47

Hand Protection
Specialist Handling Gloves
Mechanics & Anti-Vibration/Impact
Polyco Multi-Task 3 Three
Open Fingers Glove
Blend of synthetic leathers with PVC reinforced
fingertips and inner palm, and three open fingers.
Reinforced areas on palm and finger tips ensure added
protection in key areas. Adjustable Velcro ® wrist strap
for a secure fit
• Size: 7-11
• Colour: Grey/Black
2141X
Code: 304785 Manufacturer’s code: MT3 Pair
Polyco Multi-Task 5
Fully Fingered Glove
Blend of synthetic leathers with PVC reinforced fingertips
and inner palm. Reinforced areas on palm and finger
tips ensure added protection in key areas. Adjustable
Velcro ® wrist strap for a secure fit
• Size: 7-11
• Colour: Grey/Black
2141X
Code: 304789 Manufacturer’s code: MT5 Pair
Polyco Tremor-Low
Anti-Vibration Glove
Seamless knitted shell with anti-vibration coating.
Unique coating on the glove acts to reduce the effects
of impact, shocks and vibration Protective gloves
against mechanical vibration and shock EN 10819.
TRM=0.77

Specialist Handling Gloves
Anti-Vibration/Impact
Hand Protection
Impacto Anti-Vibration
Mechanics Air Glove
Made of cowhide leather for maximum durability and
protection. Silicone dots on the palm and fingertips
ensure outstanding grip and flexibility. Protects from
vibration when using hand-held or hand guided power
tools and machines such as sanders, grinders, disc
cutters, hammer drills, brush cutters and mowers
• Size: M,L,XL
• Colour: Black
1221
Code: 431933 Manufacturer’s code: BG408 Pair
Impacto Anti-Impact HAMMER GLOVE
Thin crinkled coating improves sensitivity and dexterity.
Durable resistant coating offers better Protection from
abrasion. Seamless Polycotton knit is breathable and
comfortable offering excellent fit. Cost effective solution
to impact injuries on the thumb/web area
when hammering nails or similar applications.
Padded Right hand
• Size: 7 (M), 8 (L), 9 (XL)
• Colour: Grey/Black
3131
Padded Right hand
Code: 431931
Padded Left hand
Code: 431932
Manufacturer’s code: DP470042
Pair
Manufacturer’s code: DP470041
Pair
Impacto Nitrile Anti-Vibration Air Glove
Patented Air Bubble technology in palm, fingers, thumb;
extremely resistant individual air chambers for effective
protection that won't degenerate. Excellent dexterity,
ultimate dry gripping. Cut, puncture resistant, maximum
abrasion protection. Optimal snag, fray resistance.
Lightweight, flexible nitrile coated fabric
• Size: L, XL
(other sizes available as special orders)
• Colour: Blue
4212
Code: 431934 Manufacturer’s code: BGNitrile Pair
NEW
Impacto 502-20 Fingerless
Anti-Impact Glove
VEP palm padding between thumb and index finger.
Nylon lycra, leather palm. Typically for impact protection
when using had tools
• Size: M, L (other sizes available as special orders)
• Colour: Navy
Code: 430710 Manufacturer’s code: 502-20 Pair
Impacto 501-00 Fingerless
Anti- Impact Glove
VEP palm padding between thumb and index finger.
Four way stretch polycotton Lycra liner. Typical usegeneral
assembly, material handling
• Size: M, L (other sizes available as special orders)
• Colour: Blue
2243 3231
Code: 304866 Manufacturer’s code: 501-00 Pair
Impacto AVPRO Anti-Vibration
Mechanic's style Glove
Full finger style provides maximum hand
protection. Padded with patented foam
technology in the palm, fingers, thumb and
thumb/web area to help prevent Hand-Arm
Vibration syndrome (HAVS) and White Finger
Disease. Meets ISO 10819 standard. Non-slip
textured palm with elasticised back. Elastic wrist
with adjustable hook and loop closure
• Size: M,L,XL
• Colour: Black/Yellow palm
Manufacturer’s code: AVPRO
Code: 432489
2210
Pair
49

Hand Protection
Cut Resistant Colour Coded Gloves
ALL CONFORM TO EN388 INTERMEDIATE DESIGN (CUT LEVEL 1 or 3 or 5)
We help you to improve hand safety, reduce injuries and maintain compliance
with safety regulations across your businesses.
Colour coding of gloves is a useful way to instantly monitor if the correct
protection level is being worn.
Cut 1 Red – general handling with low cut protection
Cut 3 Orange – general handling with medium cut resistance
Cut 5 Green – general handling with high cut resistance
CUT LEVEL 1 GLOVE
• Red low cut resistance
• Exceptional quality and value, lightweight lower cut
protection handling glove
• Offers excellent dexterity levels, comfort and fit
• Available in a variety of coatings
• Gloves should be used in work areas of minimal cut
hazards
Applications:
General assembly
Component handling
Light engineering work
Mechanical work
Inspection
CUT LEVEL 3 GLOVE
• Orange medium cut resistance
• A range of cost effective, durable gloves suitable for
processes where there is a cutting or laceration risk to
workers’ hands
• Excellent comfort and close fitting gloves offering high
protection levels
• Available in a variety of coatings
• Gloves should be used in work areas where a medium
cut hazard is present
Applications:
Component handling
Tiling
Steel handling
Construction
Automotive manufacturing
CUT LEVEL 5 GLOVE
• Green high cut resistance
• Designed to be close fitting for maximum dexterity.
Flexible and comfortable gloves with the highest level
of anti-cut protection for higher cut risk industries
• Available in a variety of coatings.
• Gloves should be used in work areas where a high
risk level of cut risk is present
Applications:
Construction
Glass handling
Engineering work
Metal fabrication
Sheet steel manufacturing
KeepSAFE Smooth Nitrile Foam Coated
Cut Level 1 Red Glove
Ideal for wet, dry and oily conditions. Lightweight
seamless knitted red nylon liner. High abrasion
resistance. Nitrile coating is robust and yet tactile.
Knitted wrist for secure fit
• Size: 8-11
• Colour: Red/Black
• Cartons of 10
4131
KeepSAFE PU Coated Cut Level 1
Red Glove
Ideal for intricate handling. Lightweight application in
dry environments. Offers outstanding comfort, fit and
sensitivity. High abrasion resistance. Seamless knitted
red nylon liner
• Size: 8-11
• Colour: Red/Black
• Cartons of 10
4121
KeepSAFE PU Coated 3 Digit Cut Level 1
Red Glove
Ideal for dexterous and intricate applications..
Lightweight three digit design. Thumb and two fingers
removed to aid small part handling. High abrasion
resistance. Seamless knitted red nylon liner
• Size: 8-11
• Colour: Red/Black
• Cartons of 10
4131
Code: 303178
Pair
Code: 303201
Pair
Code: 303190
Pair
50

Cut Resistant Colour Coded Gloves
ALL CONFORM TO EN388 INTERMEDIATE DESIGN (CUT LEVEL 1 or 3 or 5)
We help you to improve hand safety, reduce injuries and maintain compliance
with safety regulations across your businesses.
Hand Protection
KeepSAFE Nitrile Foam Coated Cut Level 3 Orange Glove
Ideal for work in damp or greasy environments. Nitrile foam coating ensures excellent
grip and performance. Dexterous and flexible for secure handling. Open back ensure
breathability for added comfort. Seamless knitted orange liner
• Size: 8-11
• Colour: Orange/Black
• Cartons of 10
Code: 304123
Pair
KeepSAFE PU Coated Cut Level 3 Orange Glove
Ideal for heavier duty handling in light engineering and assembly applications.
Polyurethane coating to palm and fingers offers good grip. High abrasion resistance.
Seamless knitted orange liner. Elasticated knit wrist for a snug fit
• Size: 8-11
• Colour: Orange/Black
• Cartons of 10
4343 4342
Code: 303192
Pair
KeepSAFE Nitrile Foam Coated
Cut Level 5 Green Glove
Ideal for handling sharp oily components. Excellent surface grip in all environments.
Protects against cuts and abrasions. Foam nitrile coating absorbs oil and ensures
secure grip. Seamless knitted green liner for added comfort and dexterity
• Size: 8-11
• Colour: Green/Black
• Cartons of 10
Code: 303307
4543
Pair
KeepSAFE PU Coated Cut Level 5 Green Glove
Ideal for applications where fine handling and robust performance are a requisite.
Lightweight polyurethane coating enhances grip and abrasion protection. Knitted wrist
for secure fit. Open back design for extra comfort and breathability
• Size: 8-11
• Colour: Green/Black
• Cartons of 10
4543
Code: 303309
Pair
51

Hand Protection
Cut Resistant Gloves
ALL CONFORM TO EN 388 INTERMEDIATE DESIGN
Ansell Hyflex ® 11-724
PU Cut Level 3 Glove
Silicone-free polyurethane palm dipped with
INTERCEPT cut-resistant yarn. The palm coating
design improves worker grip, extends glove life in
abrasive conditions, and allows the back-of-hand
to breathe
• Size: 6-11
• Colour: White
Code: 303658 Manufacturer’s code: 11-724 Pair
Ansell Hyflex ® 11-751
PU Cut Level 5 Glove
INTERCEPT Technology ® delivers great cut performance
providing EN ISO level B. Increased abrasion resistance
and durability for prolonged use and wear. Lightweight,
flexible liner provides enhanced comfort in a dirtmasking
design
• Size: 6-11
• Colour: Black
Code: 430761 Manufacturer’s code: 11-751
Pair
Ansell Hyflex ® 11-518 PU-Coated Cut
Level 3 Glove
An 18-gauge glove with Dyneema ® Diamond
Technology fibre and a thin PU coating bring a new
degree of dexterity and tactility for applications with
cut risks. Ultralight fabric. Seamless liner breathes to
keep hands cool and dry
• Size: 6-11
• Colour: Blue
4342 EN388:2016 4X43C 3X31B
Code: 303632 Manufacturer’s code: 11-518 Pair
52
KeepSAFE Cut Resistant Level
5 Anti-Impact Glove
Flexible TPR protective Exoskeleton-
Provides crucial impact protection to
the back of hand. Reinforced Thumb
crotch-Prolongs life of glove in high
abrasion areas. Textured Nitrile Foam
Palm-Provides maximum grip in wet
& dry. Internal palm padding-Absorbs
pressure to prevent hand fatigue. Velcro
wrist strap-keeping the glove secure
& in place
• Size: 8-11
• Colour: Black/Yellow
Code: 430970
4543
Pair
KeepSAFE Cut Resistant
Level 5 Pu Coated Glove
Seamless glass fibre/spandex/synthetic
mix yarn with PU coating on palm and
fingers. Soft finish – exceptional cool
comfort. Ideal for glass handling,
construction, automotive fabrication
and sheet metal work
• Size: 8-10
• Colour: Grey/Black
• Cartons of 12
Code: 434271
Pair
KeepSAFE Cut Resistant Level
5 Nitrile Coated Glove
Seamless glass fibre/spandex/synthetic
mix yarn with nitrile coating on palm and
fingers. Increased resistance to oils and
greases. Soft finish – exceptional cool
comfort. Ideal for glass handling, sheet
metal work, engineering maintenance,
refuse collection, janitorial applications,
agriculture and horticulture
• Size: 8-10
• Colour: Grey/Black
• Cartons of 12
Code: 434272
Pair
KeepSAFE Cut Resistant
Level 3 PU Coated Glove
Cut resistant knitted liner with
polyurethane coating on palm and
fingers. Suitable for dry working
conditions
• Size: 8-10
• Colour: Grey
• Cartons of 12
4542 4542 4342
Code: 434024
Pair

Cut Resistant Gloves & Sleeves
Hand Protection
HyFlex 11-251 Cut Resistant Sleeve with thumb slot
INTERCEPT Cut Resistance Technology provides best-in-class cut
protection and a soft and cool feel to the worker. Seamless design and the
options of lengths and widths ensure an excellent fit. With thumb slot
Narrow fit, length 30cm Manufacturer’s code: 11-251-820753
Code: 430750
Wide fit, length 40cm Manufacturer’s code: 11-251-820754
Code: 430751
Each
Each
HyFlex 11-250 Cut Resistant Sleeve without thumb slot
INTERCEPT Cut Resistance Technology provides best-in-class cut
protection and a soft and cool feel to the worker. Seamless design and the
options of lengths and widths ensure an excellent fit. Without thumb slot
2542 2542
Narrow fit, length 30cm Manufacturer’s code: 11-250-820756
Code: 430757
Wide fit, length 40cm Manufacturer’s code: 11-250- 820777
Code: 430758
Each
Each
NEW
KeepSAFE Light Kevlar ®
Cut Resistant Level 2 Glove
For fine handling of sharp objects.
Use as an under glove to provide cut resistance.
100% Kevlar ® gauge 13
• Size: 9, 10
• Colour: Yellow
• Cartons of 12
Code: 303125
XIXXXX
124X
Pair
KeepSAFE Kevlar ®
Cut Resistant Level 3 Sleeve
2-ply Kevlar ® sleeve with thumb hole.
Non-slip top (not constricting) fits all sizes
• Colour: Yellow
• Cartons of 12
Size: 355mm (14”)
Code: 303134
Size: 558mm (22")
Code: 303136
XIXXXX
134X
Each
Each
Ansell EDGE ® GLOVES 48-705
For medium weight application requiring a
high level cut protection in dry or slightly oily
environments. APPLICATIONS: Aeronautics.
Assembly. Assembling metal parts and
components. Handling sharp or irregular edged
metal parts. Plastics injection and moulding.
Liner material: High performance
polyethylene yarn combined with glass
fibre wrapped by polyester and
spandex. Coating material: Solvent
based polyurethane
• Size: 6-11
• Colour: Black
4543
Manufacturer’s code: 48-705
Code: 432487
XIXXXX
Pair
53

Hand Protection
Food Processing Disposable Gloves
KeepCLEAN Nitrile
Powder-Free Disposable Gloves
Oil and chemical resistant, and suitable for use within
the food industry. Latex and powder free. Rolled cuff for
additional strength
• Size: S, M, L, XL
• Colour: Blue
• Cartons of 10
Code: 304641 Box of 100
KeepCLEAN Latex
Powder-Free Disposable Gloves
Approved for use in food preparation. 100% natural
latex. Dispenser box. Ambidextrous
• Size: S, M, L, XL
• Colour: Natural
• Cartons of 10
Code: 304671 Box of 100
KeepCLEAN Latex
Powdered Disposable Gloves
Approved for use in food preparation. 100% natural
latex. Dispenser box. Ambidextrous
• Cartons of 10
Size: S, M, L, XL
Colour: Natural
Code: 015031 Box of 100
Size: M, L
Colour: Blue
Code: 015030 Box of 100
Vinyl Disposable Gloves
KeepCLEAN Vinyl Powder-Free Disposable Gloves
Smooth exterior, beaded cuff. Powder free. Approved for food use. Dispenser box
• Size: S, M, L, XL
• Cartons of 10
Colour: Clear
Code: 304661 Box of 100
Colour: Blue
Code: 304663 Box of 100
KeepCLEAN Vinyl Powdered Disposable Gloves
Smooth exterior, beaded cuff. Lightly powdered. Approved for food use.
Dispenser box
• Size: S, M, L, XL
• Cartons of 10
Colour: Clear
Code: 304997 Box of 100
Colour: Blue
Code: 304994 Box of 100
Colour: Red
Code: 304576 Box of 100
Colour: Green
Code: 304577 Box of 100
54

Food & General Handling Gloves
Hand Protection
Glove
detail
Juba ® By Grippaz Ambidextrous Extra Strong
Nitrile Glove
Patented double sided grip on palm and back and also inside for extra traction.
Unique fish scale design grip. 100% nitrile. No latex. No protein allergy issues.
Chemical resistant. Stretch formula fits more snugly than household gloves.
Beaded cuff will not flop down. Fits under oversleeves. Ambidextrous
• Size: 7-11
• Colour: Blue
Code: 304679
1000
Pack of 12 pairs
Ansell VersaTouch ® 87-195 Flocklined Latex Gloves
Category III Intermediate Design
Latex Gloves Category III Intermediate Design
Specially treated natural rubber to reduce the risk of allergic reactions.
Cotton flock lining. Fishscale grip design. Liquid and mechanical
resistant. Ideal for fish, poultry and meat, vegetable and fruit
processing. AQL 1.5
• Size: 7-10
• Colour: Blue
Code: 304208 Manufacturer’s code: 87-195 Pack of 12 pairs
X010
KeepCLEAN Rubber Household Gloves
Slip resistant pattern grip on palm. Soft flock lining
absorbs perspiration and keeps hands dry.
Beaded cuffs for easy donning. Length 300mm.
Thickness on palm 0.40mm
• Size: S, M, L, XL
• Cartons of 12
Colour: Blue
Code: 300796
Colour: Yellow
Code: 300797
Colour: Green
Code: 300798
Colour: Pink
Code: 300799
Pair
Pair
Pair
Pair
Ansell Astroflex Latex Gauntlet
Good grip in both wet and dry
environments due to the crinkle
finish. Polyamide seamless liner -
Wrinkle natural rubber latex coating
on the hand, smooth coating on the
cuff
• Size: 7-11
• Colour: Blue
• Cartons of 120
Code: 304224
EN 374
EN 407
X2XXXX
EN 374 AKL
EN388 2241
Pair
Juba ® Blue Grab Latex Coated Glove
Durable – excellent resistance to abrasion
and tear. 100% waterproof. Thermal insulating
(heat/cold). Cotton support for extra comfort
• Size: 8-11
• Colour: Blue
• Cartons of 12
Code: 300505
4141
Pair
55

Hand Protection
Disposable Gloves – Nitrile Disposable Gloves
Suitable for people with latex allergies and provides resistance to oils and diluted chemicals.
Ansell TouchNTuff ® 92-670 Nitrile
Powder Free Disposable Gloves
Innovative Nitrile compound – outstanding chemical
and mechanical properties, comfort and
dexterity. 3 times the puncture resistance of
latex or PVC disposable. 100% nitrile; no
waxes, silicone or plasticizers. Powder-free.
Textured finish on fingertips. Improved grip
Length: 240mm
Size: 6½-7, 7½-8, 8½-9, 9½-10
Colour: Light Blue
Manufacturer’s code: 92-670
Code: 304670 Box of 100
Length: 300mm
Size: 6-6½, 7-7½, 8-8½, 9-9½
Colour: Blue
Manufacturer’s code: 92-665
Code: 431965 Box of 100
EN 374
EN 374
Ansell TouchNTuff ® 92-605 Nitrile
Powder Free Disposable Gloves
Innovative Nitrile compound – outstanding chemical
and mechanical properties, comfort and dexterity. Three
times puncture resistance of latex or PVC disposable.
No risk to type I allergies. AQL 1.5.
Contains no natural rubber. Anti-staticity tested
EN 374
(EN 1149-1 & 1149-3) and meets the
requirements defined in EN 1149-5
EN 374
• Thickness: 0.12mm
• Size: 6½-7, 7½-8, 8½-9, 9½-10
• Colour: Green
• Cartons of 10
Length: 300mm
Manufacturer’s code: 92-605
Code: 304573 Box of 100
Length: 240mm
Manufacturer code: 92-600
Code: 304575 Box of 100
Ansell TouchNTuff ® 92-500 Nitrile
Powdered Disposable Gloves
100% nitrile – absolutely no fillers, silicones, or
plasticisers. AQL 1.5
• Length: 240mm
• Thickness: 0.12mm
• Size: 6½-7, 7½-8, 8½-9, 9½-10
• Colour: Green
• Cartons of 10
Manufacturer’s code: 92-500
Code: 304664 Box of 100
EN 374
EN 374
56
Ansell TouchNTuff ® 93-250 Nitrile Disposable Gloves
Features Ansell Grip Technology. Excellent for grip wet and dry objects.
Soft nitrile provides comfort for long wearing times. Silicone free
• Size: 5.5-6, 6.5-7, 7.5-8, 8.5-9, 9.5-10
• Colour: Anthracite
Manufacturer’s code: 93-250
Code: 430756 Box of 100
EN 374
EN 374
Ansell MICROFLEX ® 93-260 Category III Disposable Gloves
Three layer design for superior protection against harsh chemicals including
acids, solvents and bases. Extra soft material and ergonomic design for
outstanding fit, feel and flexibility for longer wear time. Lower acceptable
pinhole rate (0.65 AQL) and extended cuff for reliable protection against
hazardous substances. Silicone free. Powder free. Antistatic to EN1149
• Size: 5.5-6, 6.5-7, 7.5-8, 8.5-9, 9.5-10
• Colour: Green/Blue
Manufacturer’s code: 93-260
Code: 430755 Box of 50
EN 374
EN 374 JKL
EN 388
2000

Nitrile Disposable Gloves
ALL CONFORM TO EN 455 PARTS 1, 2 AND 3
Suitable for people with latex allergies and provides resistance to oils and diluted chemicals.
Hand Protection
Ansell Microflex ® 93-852 Black Nitrile Gloves
Excellent strength and flexibility. Contains no natural rubber latex and is
powder-free. Helps protect wearers from type 1 skin allergies.
Antistatic according to EN1149
• Size: 5.5-6, 6.5-7, 7.5-8, 8.5-9, 9.5-10
• Colour: Black
Manufacturer’s code: 93-852
Code: 430752 Box of 100
EN 374
EN 374
Polyco Finite Powder Free Nitrile Disposable Gloves
Better puncture and abrasion resistance than natural rubber or vinyl.
Excellent grip in both wet and dry conditions. Rolled beaded cuffs. USDA accepted.
Suitable for food handling. AQL 1.5
• Size: 6½, 7½, 8½, 9½
• Colour: Blue
• Cartons of 1 0
Manufacturer’s code: FN100
Code: 304808 Box of 100
Polyco Finite ® Green Powder Free Nitrile Disposable Gloves
Compliant to European Standard EN374, providing an effective barrier against oils,
acids and other chemicals. Soft elastic material feels cooler and more
comfortable to wear. Rolled cuff. AQL 1.5. EN 1186 – suitable for food contact.
Length: 250mm
• Size: 6½, 7½, 8½, 9½, 10½
• Colour: Green
• Cartons of 10
Code: 304469 Manufacturer’s code: FNG100 Box of 100
Skytec Utah
High performance, powder-free, nitrile single use disposable glove with a textured
finish. Significantly stronger alternative to latex. Comfortable with a ‘second skin’ feel.
Resistant to oils, acids and many chemicals. Category III, EN374 approved.
AQL 1.5. Powder-free, latex-free, non-sterile. Textured finish for grip and touch.
Complies with FDA food handling requirements (21CFR 177.2600)
• Thickness: 0.11mm
• Size: S-XL
• Colour: Blue
Manufacturer’s code: UTAH
Code: 303225 Box of 100
EN 374
EN 374
57

Hand Protection
Nitrile Disposable Gloves
A synthetic rubber glove that resists snags whilst also providing flexibility and dexterity that is also suitable for people with
latex allergies. It provides good resistance to petroleum, acids and aromatic and chlorinated solvents.
Juba Grippaz Heavy Duty Nitrile
Disposable Gloves
Slightly thicker than a traditional disposable
glove: provides resistance to elongation
and tear and exceptional durability in oily
environments. Patented double sided grip on
palm and back and also inside for extra grip.
Unique fish scale design grip. 100% nitrile, no
latex, no protein allergy issues.
Approved for food contact.
Chemical resistant.
Beaded cuff. Ambidextrous
• Size: S, M, L, XL
• Cartons of 10
EN 374
Colour: Black
Code: 304621 Box of 50
Colour: Orange
Code: 304622 Box of 50
KeepCLEAN Nitrile Powder Free
Disposable Gloves
Approved for use with food preparation.
100% nitrile. AQL 4.0
• Size: S, M, L, XL
• Colour: Blue
• Cartons of 1 0
Code: 304667 Box of 100
KeepCLEAN Nitrile Powdered Disposable
Gloves
Approved for use with food preparation.
100% nitrile. AQL 4.0
• Size: M, L, XL
• Colour: Blue
• Cartons of 10
Code: 304648 Box of 100
KeepCLEAN V-Nitrile Powder Free
Disposable Gloves
Smooth palm surface with beaded cuff. Non-sterile. Not
suitable for handling fatty foods. AQL 4.0
• Size: M, L, XL
• Colour: Blue
• Cartons of 10
Code: 304996 Box of 100
Synthetic Disposable Gloves
58
Polyco Finity ® Synthetic Powder Free Disposable Gloves
Thin synthetic, with an excellent fit that feels like a second skin. Latex free – for
those who are sensitised to latex. Although disposable, strong enough to be re-used.
Ambidextrous. Rolled cuff – additional strength, prevention of liquid roll back.
AQL 1.5
• Length: 240mm
• Size: S, M, L, XL
• Colour: Natural
• Cartons of 10
Code: 304825 Manufacturer’s code: FT100 Box of 100

Chemical Resistant Gloves
ALL CONFORM TO EN 388 AND EN 374 COMPLEX DESIGN
Hand Protection
Ansell AlphaTec 58-530 Nitrile Coated Gauntlet
A unique combination of grip and chemical resistance and the first
glove to utilise the revolutionary Ansell Grip Technology .
Ergonomic hand shape reduces hand fatigue. AQL: 0.65. Length: 305mm
• Size: 8-10
• Colour: Green/Black
• Packed in cartons of 72
Code: 304660 Manufacturer’s code: 58-530 Pair
EN 374
EN 374 JKL
EN388
4121
Ansell Premium Sol-vex ® 37-900 Gauntlet
Premium quality nitrile gauntlet for high risk chemical handling.
Superior chemical resistance and reliability. 100% pressure tested for
confidence in high risk areas. Chlorinated to improve wet grip.
Sanitised-bacteriacide treatment. AQL 0.65. Length: 380mm
• Size: 7 - 11
• Colour: Red
• Packed in cartons of 72
Code: 304615 Manufacturer’s code: 37-900 Pair
EN 374
EN 374 AKL
EN388
4102
Ansell AlphaTec ®
58-270 Chemical-Resistant
Nitrile Gauntlet
Thin, double-wall nitrile gauntlet. Easy to put on
and remove. Low perspiration. Length 300mm
• Size: 7-11
• Colour: Black
EN 374
EN 374 JKL
EN388
X131
Ansell Classic Sol-vex ®
37-675 Gauntlet
Designed to deliver optimal performance in
wet and dry environments where chemical
resistance is crucial. Flock lined nitrile gauntlet.
Embossed sand patch finish to enhance grip.
Sanitised - bactericide treatment.
Antistatic to EN1149. Length: 330mm.
Thickness: 0.38mm
• Size: 7-11
• Colour: Green
EN 374
EN 374 JKL
EN388
4101
Ansell Virtex
79-700 Nitrile Gauntlet
First glove to incorporate Ansell AquaDri ®
technology for drier hands. Thin, soft nitrile
for more comfort. Good chemical and
mechanical performance. Flexibility of a
lightweight re-usable product. Enhanced grip.
Antistatic to EN1149. Length: 310mm
• Size: 7-11
• Colour: Blue
EN 374
EN 374
EN 374 JKL
EN388
1001
Manufacturer’s code: 58-270
Code: 304657 Pair
Manufacturer’s code: 37-675
Code: 304605Pair
Manufacturer’s code: 79-700
Code: 304616Pair
59

Hand Protection
Chemical Resistant Gloves
Nitrile and rubber protective gloves offering certified quality at very competitive prices.
Ansell Industrial Black Heavyweight
G17K Gloves Category III
Tough, heavyweight comfortable glove. Excellent resistance to
many chemicals. Beaded, rolled cuffs, flocked lining
• Size: 6½, 7½, 8½, 9½
• Colour: Black
Code: 304242 Manufacturer’s code: G17K Pair
EN 374
EN 374 AKL
EN388
3121
Ansell VersaTouch ® Orange Glove Category III
Rough finish for excellent grip.
Tough, natural rubber; flock-lined.
Good resistance to many chemicals.
Length: 325mm
• Size: 6½, 7½, 8½, 9½
• Colour: Orange
Code: 304259 Manufacturer’s code: 87-370 Pair
EN 374
EN 374
EN388
2010
60
Polyco Jet Black Glove Category III
A heavyweight glove that will stand up to repeated
knocks,rubbing and scuffing. Good slip resistant
pattern on the palm enhances grip. Soft cotton
flock lining absorbs perspiration, keeping hands
cool. Thickness: 0.80mm. Length: 310mm
• Size: 6 - 6½, 8 - 8½, 9 - 9½, 10
• Colour: Black
4141X
Manufacturer’s code: 524/5/6/7
Code: 303220 Pair
KeepSAFE Satin Nitrile Unlined Glove
Category III Complex Design
Chemically toughened, high performance nitrile
(100% NBR), specially formulated for dexterity
and superior grip. High resistance to animal fats,
oils, most solvents. Unflocked interior – minimises
airborne cross infection. Food safe, latex protein
free. For wide ranging industrial applications
• Size: M, L, XL
• Colour: Blue
• Cartons of 72
Code: 303051
Pair
KeepSAFE Heavyweight
Rubber Glove Category
III Complex Design
Heavyweight rubber – good resistance to knocks
and abrasion. Patterned grip, flock lining.
For variety of uses
• Size: S, M, L, XL
• Colour: Black
1000 3121
Code: 304293Pair
AJK

Chemical Resistant Gloves
ALL CONFORM TO EN 388 AND EN ISO 10819 INTERMEDIATE DESIGN
Hand Protection
KeepSAFE Long Nitrile Glove
Category III Complex Design
Resistant to animal fats, solvents, alkalis.
Patterned grip, good dexterity. Good abrasion
resistance. Flock lining
• Length: 400mm
• Size: M, L, XL
• Colour: Green
• Cartons of 36
Code: 304213
AJK
4002
Pair
KeepSAFE Natural Rubber Glove
Category III Complex Design
Excellent general purpose glove.
Patterned grip, flock lined.
For industrial cleaning, many other applications
• Size: S, M, L
• Colour: Yellow
1021
Code: 304256Pair
Ansell Emperor Heavyweight
Industrial Natural Rubber Glove
Industrial Natural Rubber Glove.
High resistance to water based chemicals.
Unlined 100% rubber latex .
Beaded cuff for tear resistance. Smooth finish
• Size: 7½, 8½, 9½, 10½
• Colour: Black
• Cartons of 12
Length: 432mm Thickness: 1.5mm
Manufacturer’s code: ME105
Code: 304227
EN 374
EN 374 ABCKL
EN388
4121
Pair
Length: 610mm Thickness: 1.5mm
Manufacturer’s code: ME108
Code: 304233
Pair
Ansell Emperor Mediumweight
Industrial Natural Rubber Glove
Industrial Natural Rubber Glove.
High resistance to water based chemicals.
Unlined 100% rubber latex.
Beaded cuff for tear resistance. Smooth finish
• Size: 7½, 8½, 9½, 10½
• Colour: Black
• Cartons of 12
Length: 432mm Thickness: 1.2mm
Manufacturer’s code: ME104
Code: 304226
Length: 610mm Thickness: 1.2mm
Manufacturer’s code: ME107 (not illustrated)
Code: 304232
EN 374
EN 374 ABCKL
EN388
4121
Pair
Pair
Polyco Long John
PVC Coated Gauntlet
Ideal for deep water – keeps wearer clean in
muddy, dirty environments. Integral sleeve.
Adjustable Velcro ® strap. PVC coat, cotton liner.
For drainage works, fisheries, fish farming,
chemical handling. Length: 640mm
• Size: Men’s (9½)
• Colour: Red with dark green sleeve
• Cartons of 36
Manufacturer’s code: 3413
Code: 303049
Pair
Showa 660 PVC
Oil Resistant Gauntlet
Patented dipping process and special hydrocarbon
treatment improves performance and longevity.
Waterproof, supple, comfortable cotton liner.
Rough finish on hand – secure grip. PVC dipped,
for greatest resistance to oils, chemicals
(hydrochloric acid, caustic soda, kerosene).
Maximum resistance to abrasion (level 4)
• Length: 360mm
• Size: 9-11
• Colour: Blue
4121X 4121
Manufacturer’s code: 660
Code: 431546
Pair
61

Hand Protection
Heat Resistant Gloves
ALL CONFORM TO EN 388 AND EN 407 INTERMEDIATE DESIGN
KeepSAFE Comfort Leather
Welder’s Gauntlet
Excellent value leather welding gauntlet.
Cow split leather. Fully lined with 100% cotton.
Fully welted
• Length: 340mm
• Colour: Red
• Cartons of 12
414X4X
3144
Size: 10
Code: 304354Pair
Size: 11
Code: 304357Pair
KeepSAFE Pro Reinforced
Ambidextrous Welding Gauntlet
Quality cow split leather welder’s gauntlet. Kevlar ®
stitching. Cotton fleece on palm. Cotton drill on cuff.
Cow split leather reinforced strap on crotch of reversible
thumb. Sock lining
• Length: 350mm
414X4X
• Size: 11
• Colour: Red
• Cartons of 12
Code: 015021
3144
Pair
KeepSAFE Goat Skin
Tig Welder’s Gauntlet
Soft leather ensures maximum sensitivity to delicate
welding operations yet quality also ensures maximum
protection from heat. Goat skin leather palm and fingers
for a soft comfortable feel. Nappa leather provides
robust protection. Chrome split leather on
6" cuff. Light and flexible. Mordant treatment
to fix colour
41XX4X
• Size: 9
• Colour: Grey
• Cartons of 12
3022
Code: 303002
Pair
Electrical Insulating
Ansell E015Y
Electrical Insulating Gloves
Made from 100% natural rubber latex using a
proprietary environmentally friendly dipping process
for ultimate flexibility and dexterity. Ergonomic handat-rest
shape and non-splayed fingers reduce hand
fatigue. Certified for resistance to acid (category
a), ozone (category z) and very low temperatures
(category c) Series : Electrician: Class 00. Length:
360mm
• Size: 8-11
• Colour: Yellow
Code: 430763 Manufacturer’s code: E015Y Pair
Ansell E016Y
Electrical Insulating Gloves
Made from 100% natural rubber latex using a
proprietary environmentally friendly dipping process
for ultimate flexibility and dexterity. Ergonomic
hand-at-rest shape and non-splayed fingers
reduce hand fatigue. Certified for resistance to
acid (Category A), Ozone (Category Z) and very low
temperatures (Category C) Class 0 Yellow offers arc
flash protection Class 1 in accordance with the EN
61482-1-2². Series : Electrician: Class 0. Length:
360mm
• Size: 8 - 11
• Colour: Yellow
Code: 430762 Manufacturer’s code: E016Y Pair
Ansell Mercury ® 43-113 Kevlar ®
Glove Category III Complex Design
Constructed from 100% Kevlar ® para-aramid
fibre with cotton liner. Ambidextrous.
Heat resistance up to 350°C/660°F.
Machine washable at 40°C
• Length: 380mm
• Size: 10, 11
• Colour: Yellow
• Cartons of 36
Manufacturer’s code: 43-113
Code: 304760
43421X
EN388:2016
154XE
Pair
62

Cold Handling Gloves
Hand Protection
KeepSAFE Hi Vis Latex
Crinkle Finish Glove
Designed to protect up to -30°C/-85°F.
The glove combines excellent thermal
qualities, comfort and high visibility. Latex
crinkle coating on palm. Good grip in
wet and dry conditions. Seamless liner
for comfort. Ideal for winter conditions.
Fleece liner keeps hands warm.
Uncoated back allows the hand
to breathe
020
• Size: 9-10
• Colour: Orange
• Cartons of 12
3142X
Code: 433353Pair
KeepSAFE Hi-Vis Latex
Coated Glove
CONFORMS TO EN 388
Seamless high visibility cotton/acrylic
base for warmth. Latex coating gives
maximum grip in wet and dry
conditions. Excellent for low light
work environment
• Size: 8-10
• Colour: Saturn Yellow/Black
• Cartons of 12
020
1231
Code: 303001Pair
KeepSAFE Thermal Latex
Coated Glove
Seamless knitted cotton/acrylic liner
for warmth. Excellent value for thermal
glove. Secure grip in cold and dry
conditions
• Size: 8-10
• Colour: Grey
• Cartons of 12
2142
Code: 303004Pair
252 JUBA ® Winter Ergonomic
Seamless Glove
Blend of polyester and cotton. Rough
latex coating on palm. Terry towelling
interior protects from cold. Latex dip
protects from mechanical hazards.
Optimum grip on wet and dry
surfaces
• Size: M, L, XL
• Colour: Black/Grey
• Cartons of 10
X1X
2241
Manufacturer’s code: 252
Code: 304707 Pair
Ansell ACTIVARMR
97-011
Sandy finish ¾ double-dipped
nitrile coating. 2-ply acrylic
brushed liner. Tested to perform
at -4°C/-20°F. Black and orange
contrast provides good visibility
in low-light conditions.
Excellent for wet/oily and dry
material handling. More
breathable than leather,
keeping hands dry and
comfortable.
• Size: 8-11
• Colour: Black/Orange
EN 511
010
EN 388:2003
4232
Manufacturer’s code: 97-011
Code: 304425Pair
KeepSAFE Insulating
Grip Glove
Close fitting thermo glove with single
sided dot coating. Thermolite fibre
provides comfort and warmth.
Breathable liner prevents build up of
moisture on the hand. Dotting ensures
great grip. 13 gauge Thermolite thermal
knit, single side dot coating.
Good grip, abrasion resistance
• Size: One size fits all
• Colour: Navy Blue
• Cartons of 10
Code: 303147
Pair
Endurance Thermal
Insulating Glove
Ideal warm liner glove for cold area
product handling. One piece knitted
Thermolite fibre glove. Soft and nonchafing.
Warm and comfortable. Ideal
as a liner under food grade latex/nitrile
glove. 13 gauge Thermolite thermal knit.
Optimum warmth
• Size: One size fits all
• Colour: Navy Blue
• Cartons of 10
Code: 303145 Pair
Skytec Argon Cold
Weather Glove
Double insulated nylon liner with HPT
foam ¾ coating. Durable and flexible to
-50°C. Provides thermal protection from
cold and wintery conditions. ¾ dipped for
added weather repellence, making it the
ideal cold weather mechanical handling
glove. HPT foam coating extends across
the palm, knuckles and fingers. Soft
lining. Secure grip. Encapsulated air
molecules provide an inherent
cushioning effect. Silicone-free
02X
• Size: 7-10
• Colour: Black
• Cartons of 12
1131 3232
Code: 304402Pair
63

Safety Footwear
Buying Guide
Choose the right footwear
Most workplaces have varying requirements for the provision of safety footwear, which
is why we offer a comprehensive range within which you should be able to identify
appropriate footwear to meet the needs of your workforce whatever the hazards identified
in your risk assessment.
Whilst protection is paramount it is recognised that with long wear periods, often in hostile
conditions, wearer acceptance, design, brand and comfort are additional considerations.
We therefore offer varying styles from executive shoes to heavy duty rigger boots, and
leading brands such as Dr Martens, Rock Fall, Dewalt, Uvex & Dunlop alongside our
increasingly popular and cost effective Tuf Revolution and Tuf ranges.
Health & Safety
Legislation
EN ISO 20345:2011 is the current standard to which
new and recently certified footwear has to conform
(Whilst stock rotates some safety footwear may have
been tested to the previous standard). The standard to
which the footwear conforms will be identified on the
product information label within the footwear.
The standard requires the inclusion of a 200 joule toe
cap for impact protection. In addition to the over arching
requirements of the standards there are a number of
progressive ratings which assist selection of footwear
appropriate for varying workplace hazards, these are:
Slip Resistance
Slips, trips and falls are an ever present hazard within most workplaces and safety footwear
can play it’s part in preventing injury, particular from slips, by featuring slip resistant soles.
For many years the test of choice for slip resistance has been SATRA’s TM144 standard
which evaluates the performance of the sole unit on a water wet quarry tile. Well
established styles of footwear are likely to have been tested to TM144 and will be identified
as such by the TM144 icon.
However with regard to new styles or footwear undergoing periodic re-testing the recently
established EN ISO 13287 with it’s progressive SRA, SRB and SRC ratings has become
more widely used.
Details of the EN ISO 13287 testing requirements are shown in the table below:
Marking
Maintenance
Slip resistance ratings for industrial PPE footwear in Europe
Footwear slip resistant on
Marking symbols and specifications
Minimum coefficient of friction by ISO 13287:2006
Forward heel slip
Forward flat slip
SRA Ceramic tile with 0.5% SLS solution 0.28 0.32
SRB Steel with 90% glycerine 0.13 0.18
SRC Both the above Both the above on respective surfaces Both the above on respective surfaces
NB: ISO 13287:2006 is identical to EN ISO 13287:2007
Footwear tested to EN ISO 13287 and the rating achieved will be identified by the
appropriate SRA/SRB/SRC icon.
As with all footwear it is essential that, to achieve optimum performance of the properties
built in to the safety footwear at time of manufacture, safety footwear is cleaned and
maintained regularly.
• SB – safety basic footwear meeting all the minimum
requirements of the standard
• S1 – additionally featuring anti-static
properties and fully enclosed and energy absorbing
heel unit
• S2 – additionally featuring the use of water resistant
leather
• S3 – additionally featuring cleated outsole and pierce
resistant midsole
• S4 – rubber or polymeric waterproof footwear with
200 joule toe cap, anti-static properties and energy
absorbing heel unit
• S5 – additionally featuring cleated outsole and pierce
resistant midsole
Additional protective features can be built into the
footwear and are identified by the following suffixes:
• P – protection from upward penetration provided by
a composite or steel midsole (not used in conjunction
with S3 or S5)
• M – metatarsal impact protection
• C – conductive properties helping to prevent the buildup
of static (but no protection against electric shock)
• A – anti-static properties to prevent the
build-up of static and give limited protection against
electric shock from nominal mains voltage
• HI – insulation against heat
• CI – insulation against cold
• E – energy absorption in heel unit
• WRU – water resistant uppers
• HRO – resistance to hot contact up to 300°C
Sizing
Safety footwear often carries
European sizing. Please see right
for a comparison table.
Shoe Size Conversion Table
This table is for guidance only as sizes are not standardised
British 2 3 4 5 6 7 8 9 10 11 12 13
Continental 35 36 37 38 39 41 42 43 44 46 47 48
Safety Icons Key
METAL
FREE
Denotes electrostatic discharge (ESD)
Denotes electrostatic discharge (ESD)
LADIES SIZES
Denotes footwear suitable for women
TOECAP
Denotes footwear with safety toe cap
WATER
PROOF
Denotes waterproof footwear
Denotes SRB rating
MIDSOLE
Denotes footwear with safety midsole
TM144
Denotes TM144 rating
SRA
Denotes SRA rating
WATER
RESISTANT
Denotes water repellent footwear
ANTISTATIC
Denotes footwear with anti-static soles
SRC
Denotes SRC rating
64

Safety Footwear
Safety Footwear
65

Safety Footwear
S3 Water Resistant Safety Boots
Ideal for construction and industries where safety and pierce resistant midsoles are important,
these styles also have water resistant leather uppers.
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
TOECAP
ANTISTATIC MIDSOLE SRC
WATER
RESISTANT
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
Rock Fall ® Quartz
Safety Boot with Midsole
CONFORMS TO EN 345 20345:2011 200 JOULES S3 HRO HI SRC
The Quartz is the first Safety Boot ever manufactured
by Rock Fall and features a water repellent upper
and breathable lining. Protective steel toecap and
composite anti-penetration flexi-midsole. Premium full
grain waxy leather with Cambrelle ® and 3M comfort
and temperature regulating linings. Enhanced comfort
footbed and foam padded collar. Genuine Goodyear
Welted outsole. Internal Heel counter for greater ankle
support and stability
• Size: 4-14 (full sizes only)
• Colour: Black
Code: 102064
Manufacturer’s code: RF5910BK
Helly Hansen Chelsea Mid HT
Safety Boots
Lenzi ® L-Protection ® composite nail penetration
protection. Oil resistant PU direct injected
outsole with moulded scuff cap. Heel energy
absorption. Antistatic Helly Tech ® performance
waterproof membrane. Lightweight composite
toecap. Waxy cow leather. HellyWear protection
scuff resistant counter reinforcement. Breathable
mesh lining. Reflective trims
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 430787 Manufacturer’s code: 78250-992
Tuf 8.5" Hi-Leg Zip Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Side zip hi leg style full grain crazy horse leather. Water
resistant hard wearing and breathable leather upper.
Abrasion resistant lining with padded collar and tongue.
PU/rubber outsole heat resistant to 300°C. Hard wearing
TPU scuff cap for abrasion resistance. Pierce resistant
stainless steel midsole.
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100207
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
TOECAP
ANTISTATIC MIDSOLE SRC
WATER
RESISTANT
TOECAP
ANTISTATIC MIDSOLE SRC
WATER
RESISTANT
Tuf Leather Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 WRU SRC S3
S3 Full grain leather hiker styled safety boot
incorporating FORCE10 ® Advanced Durability
Components. Premium Full Gain Leather Upper. Padded
Collar for Enhanced Comfort and Support. Steel Toecap
and Stainless Steel Midsole. FORCE10 GR100 Solid
Nitrile Rubber Outsole. IMPACT SHIELD Internal Digging
Plate. EVA Footbed providing Increased Anti-Fatigue
Properties
• Size: 6-12 (full sizes only)
• Colour: Green/Red
Tuf 7.25" Mid-Cut Ankle Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Mid height style full grain crazy horse leather. Water
resistant hard wearing and breathable leather upper.
Padded collar and tongue for comfort. High abrasion
resistant lining for durability. Hard wearing TPU scuff cap
for abrasion resistance. PU/rubber outsole for comfort
and durability. Heat resistant to 300°C. Pierce resistant
stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Tuf Chukka Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
Low cut style full grain crazy horse leather.
Water resistant hard wearing and breathable leather
upper. Padded collar and tongue for comfort. Speed
lacing system. High abrasion resistant lining for
durability. Hard wearing TPU scuff cap for abrasion
resistance. PU/rubber outsole for comfort and durability.
Heat resistant to 300°C. Pierce resistant stainless steel
midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 198768 Pair £78.00
Code: 100206 Pair £66.62
Code: 100205 Pair £56.44
66

S3 Water Resistant Safety Boots
TOECAP MIDSOLE SRC LADIES SIZES
TOECAP MIDSOLE SRC LADIES SIZES
WATER
WATER
RESISTANT
ANTISTATIC
RESISTANT
ANTISTATIC
Safety Footwear
uvex 2 shoe
CONFORMS TO EN 20345-2011 S3 SRC
Durable water-resistant leather outdoor safety shoe with puncture-resistant midsole.
Low weight and flexible with excellent grip. Scuff-cap protects the leather preventing
abrasion damage particularly when kneeling. Dual layer, low weight PU sole with
removable antistatic comfort insole delivers outstanding impact absorption. The sole is
designed to support the natural rolling motion of the foot without restricting movement.
The tread pattern disperses surface debris to reduce slip risk. Virtually seam-free
design to eliminate pressure points. Fulfils ESD requirements: resistance to ground
under 35 megaohm
• Size: 3-17
• Colour: Black/Orange
Code: 120003 Manufacturer’s code: 6502.2
uvex 2 boot
CONFORMS TO EN ISO 20345:2011 S3 SRC. ESD RATED
Durable water-resistant leather outdoor safety boot with puncture-resistant midsole.
Low weight and flexible with excellent grip. Scuff-cap protects the leather preventing
abrasion damage particularly when kneeling. Dual layer, low weight PU sole with
removable antistatic comfort insole delivers outstanding impact absorption. The sole is
designed to support the natural rolling motion of the foot without restricting movement.
The tread pattern disperses surface debris to reduce slip risk. Virtually seam-free
design to eliminate pressure points. Fulfils ESD requirements: resistance to ground
under 35 megaohm
• Size: 3-17
• Colour: Black/Orange
Code: 120002 Manufacturer’s code: 6503.2
TOECAP MIDSOLE SRC LADIES SIZES
TOECAP MIDSOLE SRC LADIES SIZES
WATER
RESISTANT
ANTISTATIC
WATER
RESISTANT
ANTISTATIC
NEW
NEW
uvex 1 boot
STANDARD: EN ISO 20345:2011 S3 SRC. ESD RATED
An ultra light, metal free, multipurpose safety trainer style boot with penetrationresistant
midsole. The sole has been specifically designed for indoor environments
and provides excellent grip. The tread pattern with pivot point reduces pressure on
joints when twisting and turning. The uvex x-tended heel support increases stability
and side impact protection without limiting movement. It also offers greater twist
protection for reduced risk of sprains. The dual layer, low weight PU sole, with
removable antistatic comfortable insole, delivers outstanding impact absorption.
Virtually seam free design to eliminate pressure points
• Size: 3-17
• Colour: Black/Red
Code: 120000 Manufacturer’s code: 8517.2
uvex 1 shoe
Standard: EN ISO 20345:2011 S3 SRC. ESD rated
An ultra light, metal free, multipurpose safety trainer with penetration-resistant
midsole. The sole has been specifically designed for indoor environments and
provides excellent grip. The tread pattern with pivot point reduces pressure on
joints when twisting and turning. The uvex x-tended heel support increases stability
and side impact protection without limiting movement. It also offers greater twist
protection for reduced risk of sprains. The dual layer, low weight PU sole, with
removable antistatic comfortable insole, delivers outstanding impact absorption.
Virtually seam free design to eliminate pressure points
• Size: 3-17
• Colour: Black/Red
Code: 120001 Manufacturer’s code: 8516.2
67

Safety Footwear
S3 Waterproof Safety Boots
ANTISTATIC
WATER
TOECAP
MIDSOLE SRC
PROOF
TOECAP
ANTISTATIC
MIDSOLE
SRA
WATER
PROOF
Tuf Pro Waterproof Safety Boot With Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Quality water resistant leather upper and fully waterproof lining. Padded collar and
tongue. Full length footbed. Pierce resistant stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 102003
Tuf XT event ® Waterproof Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRA
Quality water resistant leather upper, fully waterproof lining. Padded collar, full length
footbed. Anti-static EVA rubber sole, heat resistant to 300ºC. Pierce resistant stainless
steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 198252
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
PROOF
TOECAP
ANTISTATIC
SRC
WATER
MIDSOLE
PROOF
TOECAP
ANTISTATIC
SRC
WATER
MIDSOLE PROOF
Tuf XT event ® Waterproof Nonmetallic
Safety Boot With Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC
Buffalo grain leather with highly breathable fully
waterproof liner for comfort. Padded collar and half
bellows tongue for easy donning. Metal free lacing
system. EVA/Rubber outsole with TPU counter support
for durability. Outsole heat contact resistant to 300°C.
PEP non-metallic composite toecap and penetration
resistant midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Tuf XT event ® Waterproof 8.5"
Hi-Leg Zip Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC
Full grain crazy horse leather with highly breathable fully
waterproof liner for comfort. Padded collar and tongue
for comfort. YKK ® side zip for quick and easy access.
Hard wearing TPU scuffcap for abrasion resistance. PU/
Rubber outsole for comfort and durability. Outsole heat
contact resistant to 300°C. Pierce resistant stainless
steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Tuf XT event ® Waterproof 7.25"
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC
Full grain crazy horse leather with highly breathable fully
waterproof liner for comfort. Padded collar and tongue
for comfort. Hard wearing TPU scuffcap for abrasion
resistance. PU/Rubber outsole for comfort and durability.
Outsole heat contact resistant to 300°C. Pierce resistant
stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 100220
Code: 100325
Code: 100322
68

S3 Waterproof Safety Boots
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
Safety Footwear
Rock Fall ® Titanium Waterproof Safety Boot with Side Zip
EN ISO 20345:2011 S3 HI CI WR HRO SRC
The Titanium is one of the lightest and most robust high leg boots available. 100%
Non-Metallic and fully waterproof, developed with specialist durability materials
including FORCE10 ® Protective fibreglass toecap and composite anti-penetration
flexi midsolecomponents and R-TEN thread. Premium full grain waxy leather with
Activ-Tex ® Waterproof Membrane. Enhanced comfort footbed, foam padded collar and
bellow. Highly durable FORCE10 ® scuff cap and solid nitrile rubber outsole. No. 8'
YKK ® side zip
• Size: 3-14 (full sizes only)
• Colour: Black
Code: 102048
Manufacturer’s code: RF4500
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
Rock Fall ® Tomcat Rhyolite Metatarsal Non-Metallic
Waterproof Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 M HRO WR SRC
A Super lightweight, luxury metatarsal protection safety boot. Deep padded collar
- extra support, comfort. Unique patented ROC-MET internal metatarsal guard.
Revolutionary metatarsal protection, highest comfort and flexibility. Ultimate traction
rubber outsole
• Size: 5-14 (full sizes only)
• Colour: Black
Code: 102024 Manufacturer’s code: TC3000 Pair £97.54
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
Rock Fall ® Slate Wateproof Composite Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC
The Slate is one of the most feature filled boots available. 100% Non-Metallic
and fully waterproof, developed for comfort and durability. It features our unique
dual footbed system. Protective fibreglass toecap and composite anti-penetration
flexi-midsole. Premium full grain waxy leather with Activ-Tex ® Waterproof
Membrane. Highly durable FORCE10 ® scuff cap and shock absorbing dual density
rubber outsole. Wide fitting provides enhanced comfort for wearers with medical
conditions
• Size: 3-15 (full sizes only)
• Colour: Black
Code: 100090 Manufacturer’s code: RF460 Pair £75.50
69

Safety Footwear
S3 Safety Boots
A range of safety boots with toe caps and penetration resistant midsole providing
protection and comfort in harsh working environments.
NEW
NEW
METAL
FREE
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
METAL
FREE
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
LADIES SIZES
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
Magnum Precision Sitemaster
Leather Composite
S3 Safety Boot Black
CONFORMS TO EN 20345: 2011 S3 WR SRC
Water resistant. Leather composite toe. Composite
plate. Full grain leather upper. Dual density PU
outsole with ladder grips for grip and durability
• Size: 6-12
• Colour: Black
Code: 432071
Magnum Precision Sitemaster
Nubuck Composite
S3 Safety Boot Honey
CONFORMS TO EN 20345: 2011 S3 WR SRC
Nubuck composite toe. Composite plate. Dual
density PU outsole with ladder grips for grip and
durability
• Size: 6-12
• Colour: Honey
Code: 432072
Pro-Man PM100 Chukka Boot
with Steel Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3
Dual density PU sole. Black leather chukka boot. Deep
padded collar. Water resistant. Steel toe cap midsole
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 430475
NEW
NEW
METAL
FREE
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
METAL
FREE
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
LADIES SIZES
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
Magnum Broadside 8.0 Composite
S3 Waterproof Insulated Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO WR SRC
Ideal protection in harsh outdoor conditions.
Waterproof and breathable bootie membrane. 200g
Thinsulate insulated lining. Michelin outsole for
maximum grip
• Size: 5-12
• Colour: Black
Code: 432073
Magnum Broadside 6.0 Composite
S3 Waterproof Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO WR SRC
Ideal protection in harsh outdoor conditions.
Waterproof and breathable bootie membrane.
Michelin outsole for maximum grip
• Size: 5-12
• Colour: Black
Code: 432074
Pro-Man PM600 with Non-Metallic
Composite Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Anti-fatigue footbed with moisture wicking tiberelle
lining. Anti-static properties. Abrasion resistant internal
heel counter. PU moulded scuff cap
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 101123
70

S3 Safety Boots and Shoes
WATER
LADIES SIZES
RESISTANT
ANTISTATIC
TOECAP
MIDSOLE
SRC
LADIES SIZES
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
Safety Footwear
uvex Heckel MACsole ® 1.0 FXH
CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO SRC
An ultra light, metal free, multipurpose safety trainer with penetration-resistant
midsole. The sole has been specifically designed for indoor environments and provides
excellent grip. The tread pattern with pivot point reduces pressure on joints when
twisting and turning. The uvex x-tended heel support increases stability and side
impact protection without limiting movement. It also offers greater twist protection for
reduced risk of sprains. The dual layer, low weight PU sole, with removable antistatic
comfortable insole, delivers outstanding impact absorption. Virtually seam free design
to eliminate pressure points
• Size: 3-13
• Colour: Black/Red
Code: 142018 Manufacturer’s code: 62642002
uvex Heckel MACsole ® 1.0 FXL
CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO SRC
An ultra light, metal free, multipurpose safety trainer with penetration-resistant
midsole. The sole has been specifically designed for indoor environments and provides
excellent grip. The tread pattern with pivot point reduces pressure on joints when
twisting and turning. The uvex x-tended heel support increases stability and side
impact protection without limiting movement. It also offers greater twist protection for
reduced risk of sprains. The dual layer, low weight PU sole, with removable antistatic
comfortable insole, delivers outstanding impact absorption. Virtually seam free design
to eliminate pressure points
• Size: 3-13
• Colour: Black/Red
Code: 142019 Manufacturer’s code: 6264012
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
SRC
uvex Heckel SUXXEED ® boot
CONFORMS TO EN ISO 20345:2011 S3 SRC
An ultra light, metal free, multipurpose safety trainer
with penetration-resistant midsole. The sole has been
specifically designed for indoor environments and
provides excellent grip. The tread pattern with pivot point
reduces pressure on joints when twisting and turning.
The uvex x-tended heel support increases stability
and side impact protection without limiting movement.
It also offers greater twist protection for reduced
risk of sprains. The dual layer, low weight PU sole,
with removable antistatic comfortable insole, delivers
outstanding impact absorption. Virtually seam free
design to eliminate pressure points
• Size:5-12
• Colour: Black/Red
uvex Heckel SUXXEED ® shoe
CONFORMS TO EN ISO 20345:2011 S3 SRC
Characterised by very good shock absorption and
exceptional grip, this ultra lightweight safety shoe has
a water-resistant oiled hydrosuede leather upper and
highly absorbent mesh liner for excellent breathability.
Non-metallic toe cap and penetration resistant midsole
helps reduce the overall weight and does not conduct
the heat or cold. Anatomically shaped double density
PU sole helps support foot, offering excellent shock
absorption. Resistant to aggressive chemicals such as
oils and hydrocarbons
• Size:5-12
• Colour: Black/Red
uvex quatro pro boot
CONFORMS TO STANDARD: EN ISO 20345:2011 S3
Designed for demanding, rugged outdoor terrain,
the uvex quatro pro is a hard wearing boot with
uncompromising levels of safety and comfort. The
durable sole combines a lighter weight impact absorbing
centre and a hard wearing rubber outsole, with a
tread pattern that disperses surface debris to reduce
slip risk. uvex 3D hydroflex ® insole provides high
impact absorption in both the heel and forefoot areas,
minimising the potential for fatigue and lower back pain.
The enhanced heel is specifically designed to promote
security and confidence when climbing ladders. Bellows
tongue design keeps debris out. Breathable textile lining.
Outsole is heat resistant to +120°C. Antistatic. Oil and
petrol resistant. Silicone free
• Size: 5-15
• Colour: Black
Code: 431428 Manufacturer’s code: 6263800
Code: 431429 Manufacturer’s code: 6263801
Code: 014799 Manufacturer’s code: 8401.2
71

Safety Footwear
S3 Safety Boots
LADIES SIZES
ANTISTATIC
TOECAP
MIDSOLE
SRC
WATER
RESISTANT
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
TOECAP
ANTISTATIC MIDSOLE SRC
WATER
RESISTANT
Tuf Waxy
Ankle Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Fully lined with breathable comfort lining. Padded collar.
Cushioned footbed. Anti-static dual density sole with
ladder grips
• Size 6-12 (full sizes only)
• Colour: Black
Code: 102625
Tuf Pro Chukka
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Speed lacing system. Padded collar and tongue.
Dual density polyurethane anti-static sole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 102070
Tuf Grain Leather Non-Metallic
Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Highly breathable lining, multi- perforated anatomic
footbed. Polymeric toe cap. Polyurethane dual density
anti-static sole. Flex system midsole
• Size: 5-12 (full sizes only)
• Colour: Black
Code: 160680
S3 Foundry Safety Boots
TOECAP
MIDSOLE
WATER
RESISTANT
TM144
ANTISTATIC
SRC
LADIES SIZES
TOECAP
MIDSOLE
WATER
RESISTANT TM144 ANTISTATIC
SRC
LADIES SIZES
TOECAP
MIDSOLE
WATER
RESISTANT TM144 ANTISTATIC
SRC
LADIES SIZES
Rock Fall ® Spark Welding Boot
EN ISO 20349:2010 S3 HI CI WR HRO SRC WG
Certified to the latest implemented foundry standard.
Developed to offer the highest level of protection with
advanced durability components. Manufactured with
Coats industrial threads and a solid nitrile rubber
FORCE10 ® outsole. Protective fibreglass toecap
and composite anti-penetration flexi-midsole. Flame
retardant full grain leather with moisture wicking mesh
lining. Ortholite ® enhanced comfort footbed. Highly
durable FORCE10 ® solid nitrile rubber outsole. Sturdy
upper and collar strap stitched with flame retardant
Cotes ® industrial threads
• Size: 5-14 (full sizes only)
• Colour: Black
Rock Fall ® Phoenix Midcut
Foundry Boot
EN ISO 20349:2010 S3 HI CI HRO SRC FE
Certified to the latest implemented foundry standard.
Manufactured with Coats industrial threads and a solid
nitrile rubber FORCE10 ® outsole. Protective fibreglass
toecap and composite anti-penetration flexi-midsole.
Flame retardant full grain leather with moisture wicking
mesh lining. Ortholite ® enhanced comfort footbed.
Highly durable FORCE10 ® solid nitrile rubber outsole.
Sturdy upper and collar strap stitched with flame
retardant Cotes ® industrial threads
• Size: 5-14 (full sizes only)
• Colour: Black
Rock Fall ® Vulcan High Leg
Foundry Boot
EN ISO 20349:2010 S3 HI CI HRO SRC FE
Certified to the latest implemented foundry standard.
Manufactured with Coats industrial threads and a solid
nitrile rubber FORCE10 ® outsole. Protective fibreglass
toecap and composite anti-penetration flexi-midsole.
Flame retardant full grain leather with moisture wicking
mesh lining. Ortholite ® enhanced comfort footbed.
Highly durable FORCE10 ® solid nitrile rubber outsole.
Sturdy upper and collar strap stitched with flame
retardant Cotes ® industrial threads
• Size: 5-14 (full sizes only)
• Colour: Black
Code: 102058
Manufacturer’s code: RF5000
Code: 430784
Manufacturer’s code: RF6000
Code: 102067
Manufacturer’s code: RF7000
72

S1P Safety Boots and Shoes
ANTISTATIC
TOECAP
MIDSOLE
SRA
ANTISTATIC
TOECAP
MIDSOLE
SRC
TOECAP
ANTISTATIC MIDSOLE SRC LADIES SIZES
WATER
RESISTANT
Safety Footwear
DEWALT Laser 6" Hiker Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRA
Industrial boot with quality leathers and mesh uppers
for breathability. Padded collar and tongue for comfort.
Injected PU/TPU sole for comfort and durability. TPU
re-inforced heel for extra support. Dual density antibacterial
insole for comfort and odour reducing
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 106014
Manufacturer’s code: DWF-50031
Tuf Pro Goodyear Welted Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Hard wearing Goodyear Welt construction. Quality leather
uppers. Padded collar and tongue for comfort. Dual
lacing system
• Size: 6-12 (full sizes only)
• Colour: Honey
Code: 102038
Tuf Lace-Up
Safety Shoe with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Leather upper, padded collar. Anti-static sole.
Pierce resistant steel midsole
• Size 6-12 (full sizes only))
• Colour: Black
Code: 142021
TOECAP
ANTISTATIC MIDSOLE SRC LADIES SIZES
TOECAP
ANTISTATIC
MIDSOLE
SRC
TOECAP
ANTISTATIC
MIDSOLE
SRC
Tuf D-Ring Chukka Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Leather upper, padded collar. Anti-static sole. Pierce
resistant steel midsole
• Size 6-12 (full sizes only)
• Colour: Black
Tuf Dealer Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Elastic gusset and pull on heel loop. Cushioned footbed.
Anti-static dual density sole. Stainless steel midsole
• Size 6-12 (full sizes only)
• Colour: Black
• Width: Wide fit
Dr Martens
Benham Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P HRO SRC
Athletic style safety hiker with breathable mesh upper..
Padded collar for comfort. Nitrile rubber outsole for
durability heat resistant to 300°C. Removable
contoured and cushioned footbed for extra comfort.
Stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Black
Code: 102041
Code: 195053
Code: 101127 Manufacturer’s code: 16248001
73

Safety Footwear
Safety Rigger Boots
A range of classic rigger boots specifically designed to uplift the old traditional image with smarter styling,
greater attention to detail, and superior quality.
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
RESISTANT
LADIES SIZES
TOECAP
ANTISTATIC
MIDSOLE
SRC
WATER
PROOF
TOECAP
ANTISTATIC
MIDSOLE
SRC
Tuf Warm Lined Rigger Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Smooth leather with pull on loops. Ankle padding for
extra support and protection. Anti-static, dual density
polyurethane sole unit. Pierce resistant stainless steel
midsole
• Size 6-12 (full sizes only)
• Colour: Tan
Code: 101198
Rockfall ® Texas 2 Non Metallic Rigger
Boot with Midsole
CONFORMS TO EN20345:2011 200 JOULES S3 WR HRO HI CI SRC
Lightweight and highly robust. 100% Non-Metallic and
waterproof, developed with specialist durability materials
including FORCE10 ® components and waterproof
Activ-Tex ® membrane. Protective fibreglass toecap and
composite anti-penetration flexi-midsole. Oil tanned crazy
horse leather with Activ-Tex ® Waterproof Membrane.
Enhanced comfort footbed and foam padded collar. Highly
durable FORCE10 ® scuff cap and solid nitrile rubber
outsole. Rubber kick off protector and pull loops
• Size 6-13 (full sizes only)
• Colour: Brown
Code: 101106
Manufacturer’s code: RF70
Tuf Lined Rigger Safety Boot
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Grain leather, fleece lining, with slip resistant,
shock absorbing sole. Anti-static, dual density
polyurethane sole unit. Pierce resistant stainless
steel midsole
• Size 6-12 (full sizes only)
• Colour: Tan
Code: 198204
TOECAP MIDSOLE SRA
TOECAP
ANTISTATIC
MIDSOLE
SRA
WATER
PROOF
74
DEWALT Rigger 2 Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP HRO SRC
Full grain leather upper with PU collar and TPU heel support.. Sole heat resistant to
300°C. Pierce resistant stainless steel midsole
• Size: 6-13 (full sizes only)
• Colour: Brown
Code: 106016
Manufacturer’s code: DWF-50071-121
Dunlop Purofort ® Rig-Air Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI
Polyurethane body – 100% waterproof and insulated down to -20°C.. Anti-bacterial
lining. Anti-static sole and pierce resistant stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Tan
Unlined Code: 101108 Manufacturer’s code: C462743 P
Fur lined Code: 101109 Manufacturer’s code: C462743 F

SB Safety Footwear
A range of footwear with classic styling and basic safety toe cap protection only.
TOECAP MIDSOLE SRC
TOECAP MIDSOLE SRC
Safety Footwear
Tuf Revolution Performance Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC
Skate boot styling nubuck leather upper material with reflective trim flash
Padded collar for comfort and ankle support. Split suede padded tongue for
strength and comfort. Full length cushioned footbed. Rubber shock absorbent
slip resistant sole. Energy absorbing heel unit to reduce fatigue. Pierce resistant
flexible composite midsole
• Size 6-12 (full sizes only)
Colour: Honey Code: 198251
Colour: Black Code: 198250
Tuf Revolution Performance
Baseball Style Safety Trainer Boot with Midsole
CONFORMS TO EN 320345:2011 200 JOULES SBP E SRC
Baseball boot style with suede and canvas upper material. Smooth rubber scuff
cap. Padded collar for comfort and ankle support. Canvas padded tongue for
strength & comfort. Full length cushioned footbed. Rubber shock absorbent slip
resistant sole. Energy absorbing heel unit to reduce fatigue. Pierce resistant
flexible composite midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100539
TOECAP
SRA
TOECAP MIDSOLE SRA
TOECAP
SRA
LADIES SIZES
Dr Martens
Icon Leather Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Iconic Dr Martens Airwair safety boot, with
Cosmo ® Pibitex lining and Smartmask ® footbed
for high comfort. Full leather upper. Dr. Martens air
cushioned commando style sole
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 101102
Manufacturer’s code: 7B10
Dr Martens Icon Dealer Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Traditional dealer boot, with full leather upper and
black elastic gusset. Dr Martens air cushioned
commando style sole. Yellow Z welt stitch
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 101320 Manufacturer’s code: 2228
Dr Martens Icon Chukka Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Full leather upper with Cosmo ® Pibitex lining and
Smartmask ® footbed for high comfort. Dr. Martens air
cushioned commando style sole
• Size: 5-12 (full sizes only)
• Colour: Black
Code: 102006
Manufacturer’s code: 7B09
75

Safety Footwear
Safety Trainers
S3 Safety Trainers
TOECAP
ANTISTATIC
MIDSOLE SRC TOECAP
ANTISTATIC
MIDSOLE
SRC
Rock Fall ® TeslaDRI ESD Midcut Safety Trainer Boot
CONFORMS TO EN ISO 20345:2011 S3 ESD SRC + EN 61340-5-1:2007 - ESD RATED
TeslaDRI is a specialist style developed with a major automotive manufacturer and
has been tested strict ESD standards. It's 100% Non-Metallic and manufactured
with advanced comfort materials. Protective fibreglass toecap and composite antipenetration
flexi-midsole. Sympatex ® Climate upper provides highest breathability.
Ortholite ® enhanced comfort footbed. Shock absorbing and non-marking EPR
outsole. Suitable for Vegetarians, Vegans and wearers allergic to Chrome
• Size 6-13 (full sizes)
• Colour: Black
Code: 100083
Manufacturer’s code: RF120
Rock Fall ® FaraDRI ESD Safety Trainer
CONFORMS TO EN ISO 20345:2011 S3 ESD SRC + EN 61340-5-1:2007 - ESD RATED
FaraDRI is a specialist style developed with a major automotive manufacturer and
has been tested strict ESD standards. It's 100% Non-Metallic and manufactured
with advanced comfort materials. Protective fibreglass toecap and composite antipenetration
flexi-midsole. Sympatex ® Climate upper provides highest breathability.
Ortholite ® enhanced comfort footbed. Shock absorbing and non-marking EPR
outsole . Suitable for Vegetarians, Vegans and wearers allergic to Chrome
• Size 6-13 (full sizes)
• Colour: Black
Code: 100084
Manufacturer’s code: RF008
S1P Safety Trainers
TOECAP
ANTISTATIC MIDSOLE SRA
TOECAP
ANTISTATIC MIDSOLE SRC LADIES SIZES
76
DEWALT Cutter Non-Metallic Safety Trainer with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRA
Very lightweight, with fabric and mesh breathable upper and Aerospace lining. Dual
density anti-bacterial insole. EVA/rubber cemented sole. Rubber toe guard, composite
toe cap. Pierce resistant midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 106011
Manufacturer’s code: DWF-60086-126
Tuf Pro Safety Trainer Shoe with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S1P SRC
Leather upper with dual density anti-static sole. Padded collar, tongue.
Pierce resistant stainless steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 143004

MAIN FEATURES
• Low profile styling
• Lightweight
materials
• Padding for comfort
• Textured scuff cap
• Cemented rubber outsole
• Steel toe cap and
PEP flexible midsole for
penetration resistance
Tuf Revolution
Performance Low
Profile Safety
Trainer with
Midsole
CONFORMS TO EN 20345:2011
200 JOULES SBP E SRA
Action nubuck, mesh and fabric upper on a
low profile outsole. Padded collar and tongue.
Full length footbed. Dual layer scuff cap and
heel counter. Pierce resistant flexible midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 100538
Safety Footwear
TOECAP MIDSOLE SRA
SBP Safety Trainers
TOECAP MIDSOLE SRC
TOECAP MIDSOLE SRC
Tuf Revolution Performance Safety Trainer Shoe
with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC
Suede and mesh fabric upper, with full length cushioned footbed and ankle and
counter support. Padded collar, tongue. Brushed rubber scuff cap. Rubber shock
absorbent, slip resistant sole. Pierce resistant flexible midsole
• Size: 6-12 (full sizes only)
• Colour: Black
Code: 100536
Tuf Revolution Performance Safety Trainer Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC
Trainer boot style with suede and mesh fabric upper material with reflective trim flash.
Brushed rubber scuff cap and counter support. Padded collar for comfort and ankle
support. Split suede padded tongue for strength and comfort. Full length cushioned
footbed. Rubber shock absorbent slip resistant sole. Energy absorbing heel unit to
reduce fatigue. Pierce resistant flexible composite midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100537 Pair £65.23
77

Safety Footwear
Safety Shoes
NEW
METAL
FREE
TOECAP
WATER
RESISTANT
MIDSOLE
ANTISTATIC
SRC
NEW
METAL
FREE
TOECAP
WATER
RESISTANT
MIDSOLE
ANTISTATIC
SRC
Tuf Pro Executive Brogue Composite Safety Shoe
with Midsole - Marble
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Brogue detailed design, soft full grain waxy smooth leather with abrasion-resistant
lining and EVA foam comfort footbed with energy absorbing technology. Smooth
leather for smart executive finish. Strobel stitched for increased durability. Metalfree
toe cap and pierce-resistant midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100258
Tuf Pro Executive Oxford Composite Safety Shoe
with Midsole - Nickel
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Soft full grain waxy smooth leather with abrasion-resistant lining and EVA foam
comfort footbed with energy absorbing technology. Padded collar for improved
comfort. Smooth leather for smart executive finish. Metal-free toe cap and pierceresistant
midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 100257
NEW
NEW
TOECAP
ANTISTATIC
SRC
TOECAP
ANTISTATIC
SRC
Tuf Executive Brogue Safety Shoe - Atlanta
CONFORMS TO EN 20345:2011 200 JOULES S1
Leather upper with padded collar. High abrasion resistant lining. Dual density PU
sole with energy absorbing heel unit for comfort and reduced fatigue
• Size 6-12 (full sizes only)
• Colour: Black
Code: 142014
Tuf Executive Gibson Safety Shoe - Denver
CONFORMS TO EN 20345:2011 200 JOULES S1
Leather upper with padded collar. High abrasion resistant lining. Dual density PU
sole with energy absorbing heel unit for comfort and reduced fatigue
• Size 6-12 (full sizes only)
• Colour: Black
Code: 142024
78

Safety Shoes
TOECAP
SRA
TOECAP
WATER
RESISTANT ANTISTATIC LADIES SIZES SRC
Safety Footwear
Dr Martens Icon Leather Safety Shoe
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
Smart, durable Dr. Martens classic, upgraded with Smartmask ® PU-cushioned
footbed. Industrial strength leather. Unbeatable underfoot comfort of air-cushioned sole
• Size: 5-13 (full sizes only)
• Colour: Black
Code: 142349 Manufacturer’s code: 2216
Tuf Unisex Microfibre Slip-on Safety Shoe
CONFORMS TO EN 20345:2011 200 JOULES S2 SRC
Lightweight technology, with microfibre uppers that are resistant to many oils, acids
and chemicals. Machine washable at 30°C for two washes. Padded collar and full
length footbed for comfort. Anti-static dual density slip resistant soles. Steel toe caps
• Size 6-12 (full sizes only)
• Colour: White
Code: 198624
TOECAP
ANTISTATIC
MIDSOLE SRC
TOECAP
WATER
RESISTANT
ANTISTATIC
MIDSOLE
SRC
LADIES SIZES
Dr Martens Keadby
Safety Shoe with Midsole
CONFORMS TO EN20345:2011 200 JOULES S1P HRO SRC
Multi-purpose safety shoe with full grain leather upper. Padded collar and tongue for
comfort. Smartmask ® PU cushioned footbed. Nitrile rubber outsole heat resistant to
300°C. Pierce-resistant stainless steel midsole
• Size: 6-12 (full sizes only)
Code: 143017
Tuf Safety Shoe with Midsole
CONFORMS TO EN 20345: 2011 200 JOULES S3 SRC
Classic style work shoe with smooth leather upper. Padded collar and tongue for
comfort. Abrasion resistant mesh fabric lining. Full length foam fabric footbed. Energy
absorbing heel to reduce fatigue. Pierce resistant stainless steel midsole
• Size 6-12 (full sizes only)
• Colour: Black
Code: 143625
79

Safety Footwear
Tuf Safety Wellington Knee Boots
A high quality range of safety wellington knee boots designed for the
construction, agricultural and food industries.
WATER
PROOF
MIDSOLE
LADIES SIZES
SRA
TOECAP
WATER
PROOF
LADIES SIZES
SRA
Tuf Safety Wellingtons with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 SRA
PVC with PVC/nitrile sole; oil, acid, alkali, fat resistant. Ribbed heel with kick-off
tab to assist removal. Pierce resistant steel midsole
• Size 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 165022
Tuf Food Industry Safety Wellingtons
CONFORMS TO EN 20345:2011 200 JOULES S4 SRA
PVC with PVC/nitrile sole; oil, acid, alkali, fat resistant. Ribbed heel to assist
removal
• Size 6-12 (full sizes only)
• Colour: White with White sole
Code: 165020
Tuf Thigh and Chest Wader Safety Boots
TOECAP
WATER
PROOF
MIDSOLE
SRA
TOECAP
WATER
PROOF
MIDSOLE
SRA
80
Tuf Safety Chest Wader
with Midsole
CONFORMS TO EN 20345:2011
200 JOULES S5 SRA
Chest wader with over shoulder
braces. PVC with PVC/nitrile sole.
Oil, acid, alkali, fat resistant.
Ribbed heel tab to assist removal.
Pierce resistant steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 165025
Tuf Safety Thigh Wader
with Midsole
CONFORMS TO EN 20345:2011
200 JOULES S5 SRA
Thigh length wader, with fleece lined
extension and belt loop straps. PVC
with PVC/nitrile sole. Oil, acid, alkali,
fat resistant. Ribbed heel tab to assist
removal. Pierce resistant steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 165024

Dunlop Purofort ® Safety Wellingtons
Dunlop ® is the only company with the Purofort ® Technology and invented the first Polyurethane boot.
Specialised high pressure manufacturing introduces millions of tiny air bubbles into the synthetic material during manufacture.
This gives Purofort ® boots their remarkable and unique properties.
Safety Footwear
TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA
LADIES SIZES
Dunlop Purofort ® Thermo Plus
Full Safety Wellington Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRC
Lightweight, durable; polyurethane Thermo+ upper and sole can withstand conditions
down to -50°C. Resistant to minerals, animal and vegetable oils and fats, disinfectants,
manure, solvents and various chemicals. Heat retaining sole. Shock absorbing
technology. Flexible upper – ease of movement. Pierce resistant stainless steel midsole
• Size: 5-12 (full sizes only)
• Colour: Orange with Blue sole
Code: 164774
Manufacturer’s code: C662343
Dunlop Purofort ® Full Safety Boot with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRC
Polyurethane upper and sole – acid, alkali, oil, fat resistant. Anti-static sole. Washable
nylon lining. Pierce resistant steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Black sole
Code: 164050
Manufacturer’s code: C762041
TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA TOECAP
ANTISTATIC
MIDSOLE
WATER
PROOF SRA
LADIES SIZES
Dunlop Purofort ® Professional
Safety Wellingtons with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRA
Polyurethane upper, with anti-static, energy absorbing, cold-insulating
sole. Acid, oil, fat resistant. Washable nylon lining. Pierce resistant steel midsole
• Size: 6-13 (full sizes only)
• Colour: Yellow with Black sole
Code: 164773
Manufacturer’s code: C462241
Dunlop Purofort ® Professional
Safety Wellingtons with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 CI SRA
Polyurethane upper, anti-static, energy absorbing, cold-insulating sole.
Acid, oil, fat resistant. Washable nylon lining. Pierce resistant steel midsole
• Size: 4-13 (full sizes only)
• Colour: Green with Black sole
Code: 160746
Manufacturer’s code: C462933
81

Safety Footwear
Dunlop Purofort ® Food Wellingtons
Dunlop ® introduces a new generation of Purofort ® wellingtons explicitly designed for the Food Processing Industry. These
wellingtons offer addition to all of the benefits of Purofort ® technology, solutions based on all the specific needs within this
industry with the addition of anti-bacterial lining and extra smooth upper, easy to clean in boot washer for cleanliness.
TOECAP
WATER
PROOF
ANTISTATIC LADIES SIZES
SRC
Dunlop Purofort ® FoodPro MultiGrip Safety Boot
CONFORMS TO EN 20345:2011 200 JOULES S4 CI SRC
CA61131 Recognised food industry safety boot.
Recognised food industry safety boot. Specifically designed to offer
the highest slip resistance in (semi-) solid contaminated areas.
Upper insulated down to -20°C. Stays flexible even at low
temperatures. Durable and shock absorbant. Anti-slip sole resistant
to: mineral, animal and vegetable oils and fats, manure, blood,
disinfectants, solvents and various chemicals
• Size 3-12 (full sizes only)
•Colour: White with Blue sole
Code: 160759
Manufacturer’s code: CA61131
Safety Wellingtons
Safety and non-safety welingtons for Industry, Food, Agriculture and Leisure wear.
TOECAP
MIDSOLE
WATER
PROOF SRA TOECAP
WATER
PROOF
SRA
LADIES SIZES
TOECAP
WATER
PROOF
ANTISTATIC
MIDSOLE
LADIES SIZES
SRA
Dunlop Acifort Ribbed
Safety Wellingtons with Midsole
CONFORMS TO EN 20345:2011 200 JOULES SBP SRA
PVC/nitrile upper and sole; acid, alkali, oil, fat resistant.
Washable nylon lining. Pierce resistant stainless
steel midsole
• Size: 6-12 (full sizes only)
• Colour: Black with Red sole
Dunlop Protomaster
Safety Wellingtons
CONFORMS TO EN 20345:2011 200 JOULES SB SRA
PVC/nitrile upper and sole; resists acids, bases,
disinfectants, blood. Antibacterial washable lining.
Anti-slip sole
• Size: 3-13 (full sizes only)
• Colour: White with Green sole
Dunlop Protomaster
Safety Wellingtons with Midsole
CONFORMS TO EN 20345:2011 200 JOULES S5 SRA142 PP
PVC/nitrile upper and sole; acid, base, disinfectant
resistant. Washable nylon lining. Pierce resistant
steel midsole
• Size: 3-13 (full sizes only)
• Colour: Black with black sole
Code: 164512
Manufacturer’s code: A252931
Code: 164040
Manufacturer’s code: 171BV
Code 165012
Manufacturer’s code: 142 PP
82

Safety Wellingtons
Safety and non-safety willingtons for Industry, Food, Agriculture and Leisure wear.
WATER
TOECAP
PROOF
MIDSOLE
LADIES SIZES
SRA
WATER
TOECAP
MIDSOLE
RESISTANT
WATER
PROOF
Safety Footwear
ANTISTATIC
TM144
SRC
Dunlop Devon Basic Full Safety Wellington - S5
Steel toecap & midsole. Oil resistant outside. Antistatic. Energy absorbing
and cold insulating sole. Material: PVC / nitrile rubber
• Sizes: 3-12
• Colour: Black
Code: 430136
Manufacturer’s code: H142011
Rock Fall ® Silt Neoprene Safety Wellington
EN ISO 20345:2011 S5 CI HRO SRC
100% Non-Metallic and fully waterproof, developed with specialist durability materials
including 5mm Neoprene Upper and a Solid Nitrile Rubber sole. Protective fibreglass
toecap and composite anti-penetration flexi-midsole. 5mm neoprene upper with
enhanced thermal properties. Activ-Step ® enhanced comfort footbed. Highly durable
solid nitrile rubber outsole. Reflective piping for increased visibility of the wearer
• Size: 3-13 (full sizes only)
• Colour: Navy/Orange
Code: 430785
Manufacturer’s code: RF290
Dunlop Non-Safety Wellington Boots
WATER
PROOF
LADIES SIZES
Dunlop Pricemaster Non-Safety Wellingtons
PVC upper and sole; resistant to low concentration acids, alkalis, disinfectants.
Nylon lining, water resistant
• Size: 3-12 (full sizes only)
380PP Colour: Black with Black sole
Code: 164036 Manufacturer’s code: 380PP
380VP Colour: Green with Black sole
Code: 164034 Manufacturer’s code: 380VP
83

Safety Footwear
Ladies Safety Boots & Shoes
Designed and manufactured specifically for ladies, these stylish and comfortable
shoes contribute to improving the work experience without compromising on quality.
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
TOECAP
WATER
PROOF
ANTISTATIC MIDSOLE SRC
Rock Fall ® Vixen Onyx Black Ladies Fit Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 HI WR HRO SRC
Lightweight and stylish ladies safety boot suitable for Construction. 100% Non-
Metallic and waterproof. Protective fibreglass toecap and composite anti-penetration
flexi-midsole. Premium full grain waxy leather with Activ-Tex ® Waterproof Membrane.
Enhanced comfort footbed and foam padded collar. Shock absorbing ladies fitting
nitrile rubber outsole. Manufactured using a woman's footwear last
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102061
Manufacturer’s code: VX950A
Rock Fall ® Vixen Onyx Honey Ladies Fit Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 HI WR HRO SRC
Lightweight and stylish ladies safety boot suitable for Construction. 100% Non-Metallic and
waterproof developed with comfort in mind. Protective fibreglass toecap and composite
anti-penetration flexi-midsole. Premium full grain waxy leather with Activ-Tex ® Waterproof
Membrane. Enhanced comfort footbed and foam padded collar. Shock absorbing ladies
fitting nitrile rubber outsole. Manufactured using a woman's footwear last
• Size: 3-8 (full sizes only)
• Colour: Honey
Code: 102069
Manufacturer’s code: VX950C
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
TOECAP
WATER
RESISTANT
ANTISTATIC MIDSOLE SRC
Rock Fall ® Vixen Emerald Ladies Fit Safety Boot
CONFORMS TO EN ISO 20345:2011 S3 SRC
Lightweight and stylish ladies safety boot. It's manufactured on a woman's footwear
last and can be worn with trousers in the office environment. Protective steel toecap
and composite anti-penetration flexi-midsole. Premium full grain leather upper with
moisture wicking lining. Enhanced comfort footbed and foam padded collar. Shock
absorbing ladies fitting PU outsole. Manufactured using a woman's footwear last
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102062
Manufacturer’s code: VX500
Rock Fall ® Vixen Amber Ladies Fit Safety Shoe
CONFORMS TO EN ISO 20345:2011 S3 SRC
Lightweight and stylish ladies safety shoe. It's manufactured on a woman's footwear
last and can be worn with trousers in the office environment. Padded collar and
tongue for comfort. Protective steel toecap and composite anti-penetration fleximidsole.
Premium full grain leather upper with moisture wicking lining. Enhanced
comfort footbed and foam padded collar. Shock absorbing ladies fitting PU outsole.
Manufactured using a woman's footwear last
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 102053
Manufacturer’s code: VX400
TOECAP
ANTISTATIC
MIDSOLE
SRC
84
Rock Fall ® Vixen Pearl Ladies Fit ESD Safety Trainer
EN ISO 20345:2011 S1P ESD SRC + EN 61340-5-1:2007 - ESD RATED
Tested strict ESD standards. 100% Non-Metallic. Protective fibreglass toecap and
composite anti-penetration flexi-midsole. Navy suede upper with moisture wicking
lining. Enhanced comfort footbed and foam padded collar. Shock absorbing ladies
fitting PU outsole. Manufactured using a woman's footwear last
• Size: 3-8 (full sizes only)
• Colour: Navy/Blue
Code: 102052 Manufacturer’s code: VX700 Pair £67.36

Ladies Safety Boots & Shoes
ANTISTATIC
TOECAP
SRC
ANTISTATIC
TOECAP
SRC
Safety Footwear
uvex 1 Shoe
CONFORMS TO EN ISO 20345:2011 S2 SRC. ESD RATED
Ultra light multipurpose safety trainer designed for indoor environments. Metal
free. PU sole, antistatic comfortable insole, delivers outstanding impact absorption.
Elastic laces allow shoes to be quickly adjusted, slipped on or off and expand and
contract as your feet swell and cool throughout the day
• Size: 3-15
• Colour: Black
Code: 431421 Manufacturer’s code: 8544.8
uvex 1 Boot
CONFORMS TO EN ISO 20345:2011 S2 SRC. ESD RATED
Ultra light multipurpose safety boot designed for indoor environments. Metal free.
Breathable, water-resistant high-tech microvelour upper. Out sole is resistant to
temperatures up to +120ºC
• Size: 3-15
• Colour: Black
Code: 431422 Manufacturer’s code: 8545.8
TOECAP
WATER
RESISTANT ANTISTATIC
SRC
TOECAP
WATER
RESISTANT ANTISTATIC
SRC
uvex 1 Ladies Shoe
CONFORMS TO EN ISO 20345:2011 S2 SRC. ESD RATED
Made specifically for the contours of the female foot. This multipurpose safety trainer
has an ultra light design, with a sole that has been specifically designed for indoor
environments, provides excellent grip
• Size: 3-9
• Colour: Grey/Pink
Code: 431423 Manufacturer’s code: 8562.8
uvex 1 Ladies Perforated Shoe
CONFORMS TO EN ISO 20345:2011 S1 SRC. ESD RATED
Made specifically for the contours of the female foot. This ultra light multipurpose
safety trainer is perforated making it suitable for working in warm conditions, those
with hot feet or during the summer months
• Size: 3-9
• Colour: Grey/Pink
Code: 431424 Manufacturer’s code: 8561.8
85

Safety Footwear
Ladies Safety Boots & Shoes
WATER
WATER
ANTISTATIC
TOECAP
RESISTANT
MIDSOLE SRC
TOECAP
RESISTANT
ANTISTATIC MIDSOLE SRC
Rock Fall ® Vixen Topaz Ladies Slip-On Safety Shoe
CONFORMS TO EN 20345:2011 200 JOULES S3 SRC
Lightweight and stylish ladies safety shoe. Can be worn with trousers in the
office environment. Protective steel toecap and composite anti-penetration fleximidsole.
Premium full grain leather upper with moisture wicking lining. Enhanced
comfort footbed and foam padded collar. Shock absorbing ladies fitting PU outsole.
Manufactured using a woman's footwear last
• Size: 3-8 (full sizes only)
• Colour: Black
Code: 143806
Manufacturer’s code: VX530
Pro-Man PM100 Chukka Boot with Steel Midsole
CONFORMS TO EN 20345:2011 200 JOULES S3
Dual density PU sole. Black leather chukka boot. Deep padded collar. Water resistant.
Steel toe cap midsole
• Size: 3-13 (full sizes only)
• Colour: Black
Code: 430475
Manufacturer’s code: PM100
Footwear Accessories
Insoles
uvex hydroflex GEL insoles
Breathable natural cork with active coal
prevents foot odour. Shock absorbing GEL in
heel area helps reduce foot fatigue and potential
musculoskeletal ailments. Effective ventilation
• Size: 5-13 (full sizes only)
Code: 170005 Manufacturer’s code: 9598.2
Cush ’N’ Step Insole
100% polyurethane foam. Overlaid with
soft latex layer. Covered hard wearing
polyester. Washable at 40°C
• Size: 7-12 (full sizes only)
Code: 170002
Safety Overshoe
86
Impacto ® Turbotoe Safety Overshoe
Built-in 200 joule steel toe cap – fits over low-heel,
dress and running shoes and most boots. Protects toe
area from accidental impact, crushing or stubbing.
Easily cleaned and reusable. Ideal for environments
with risk of toe damage or has steel toe cap
requirement. Perfect for visitors, casual or temporary
workers, management, clerical, sales people. Colours
vary according to UK sizes (see table)
• Size: 4.5 – 14
Code: 170020
UK SIZES
IMPACTO ® TURBOTOE
COLOUR SIZE GUIDE
Grey 4.5 - 5.5
White 6 - 7.5
Yellow 8 - 9.5
Red 10 - 11.5
Blue 12 - 13
Green 13 - 14

Footwear Accessories
NEW NEW NEW
Safety Footwear
Work Force Heavy Duty Safety Boot
Socks Calf Length Safety Boot Socks
Full terry cushion footbed for maximum comfort and
shock absorption. Knitted arch supports for fit &
hold. Classic ribbed welt for comfort. 82% Cotton,
15% Polyester, 3% Elastane
• Colour: Black
• Fits 6-11
Code: 431963 Manufacturer’s code: WFH0090BLK
Work Force Heat Holders
Reinforced Socks
Patented long loop cushion pile to hold more warm air
close to the skin. 91% Acrylic, 5% Nylon, 3% Polyester,
1% Elastane. Reinforced heel and toe
• Colour: Black
• Fits 6-11
Code: 364052
Manufacturer’s code: BSMHH81H1BLK
Work Force Lightweight
Workwear Socks
Fully cushioned foot. Cotton rich. Comfort rib. 68%
Cotton, 16% Acrylic, 14% Polyester, 2% Elastane
• Colour: Black
• Fits 6-11
Code: 430789 Manufacturer’s code: WFH0095BLKH
NEW
Tuf Revolution
Heavyweight Twin Pack Socks
Elasticated reinforced rib. Internal Comfort Zone. Extra
padded toe & heel support
• Fits 7-12
Code: 364033
Endurance Thermal
Seaboot Stockings
54cm (21") seaboot hose. Ultra warm. 50% artificial
fibre, 50% wool
• Colour: White
• 54cm (21") seaboot hose
Code: 364026
BlueGuard
Anti-Abrasion Durability Socks
High strength filament polymers bound and
engineered for maximum abrasion. Comfort
fit, cotton rich body, reinforced toe seam. 63%
Cotton, 32% Polyamide, 4% Polypropylene, 1%
Lycra Elastan
Size: 6-8½, 9-11
Colour: Black
Manufacturer’s code: SBM21H1BLK
Code: 364050
Size: 6-8½, 9-11
Colour: Navy
Manufacturer’s code: SBM22H1NVY
Code: 431977
Shoe and Helmet Sanitiser Spray
Combines sanitising and air freshening properties.
For all kinds of multipurpose use on footwear/headgear
• Size: 480ml
• Cartons of 12
Code: 508454
Cherry Blossom Shoe/Boot Polish
• Cartons of 12
• Colour: Black
Code: 508607 Each £2.67
87

Respiratory Protection
Buying Guide
Selecting the correct protection
The selection of Respiratory Protection follows a basic four-step method:
• Identify the hazards – dust, metal fume, gas, vapour
• Assess the hazards – assess the hazard level/other protection – skin and eye
• Select the proper respirator – disposable, half mask, full face, powered, airline
• Training in fitting and use – to optimise respiratory protection
FILTER MARKINGS
For use against
Gas and
Vapour
(EN 14387
and
EN 405)
Filter Colour
Type Code Main Applications
A Brown
Organic Vapours with boiling point greater
than 65˚C and good warning properties
B Grey
Inorganic gases and vapours, E.g. Chlorine
(not Carbon Monoxide)
E Yellow
Acid gases and vapours, E.g. Sulphur Dioxide,
Hydrogen Chloride
K Green Ammonia and organic ammonia derivatives
P White Particulate
Hg Pink Mercury Vapour
AX
Brown
Certain organic compounds with boiling points
less than 65°C & good warning properties
Health & Safety
Legislation Update Amended
Standard EN 149:2001+A1:2009
EN 149:2001 was superseded by an amended version, EN
149:2001+A1:2009 (EN 149+A1) in July 2009. Changes
included the introduction of two usability classifications
for disposable respirators; single shift only devices nonreusable
(shown through marking “NR”) and reusable
devices (marked ‘R’).
The amended European Standard EN 149:2001+A1:2009
states that all reusable devices (marked ‘R’) must
withstand being cleaned and disinfected using a method
provided by the manufacturer. This change, along with
new performance requirements, is intended to give the
user further confidence in respirators providing continuous
respiratory protection in hazardous environments.
All particle filtering half masks featured fully conform to EN
149:2001+A1:2009
Disposable respirators that have passed the optional
Dolomite clogging test have a suffix ‘D’ listed in their
conformity standards.
Particles
(EN 143
and EN 149)
P1 White Protection against particulates
P2 White Protection against particulates
P3 White Protection against particulates
S White Solid
L White Liquid
DUSTS
Produced when solid
materials are broken
down into finer particles,
the longer the dust
remains in the air the
easier it is to inhale.
MISTS
Tiny liquid droplets
formed by atomisation
and condensation
processes such as
spraying. Mists are often
combinations of several
hazardous ingredients.
METAL FUMES
Occur when metals
are vaporised under
high heat. The vapour
is cooled quickly and
condenses into very
fine particles that float
in the air.
GASES
Airborne at room
temperature. Able
to diffuse or spread
freely, can travel
very far very quickly.
VAPOURS
Gaseous state of
substances that are
liquids or solids at
room temperature.
Formed when
substances evaporate
in the way water vapour
evaporates from water.
European Standards
Respirators are tested to the relevant European Standards
and CE marked. All respirators carry the CE mark plus the
European Standard and performance category markings.
EN 149 – Filtering face piece and particulate
respirators
EN 405 – Valved filtering half mask respirators for
gases and/or particulates
EN 140 – Half mask face pieces
EN 136 – Full face pieces
EN 137
– Self-contained open-circuit compressed
air breathing apparatus
EN 143 – Particulate filters
EN 146
EN 147
EN 270
EN 402
EN 529
– Powered respirators – hoods & helmets
– Powered – full face masks
– Heavy duty supplied air
– Escape Apparatus. SCBA with full face
mask or mouthpiece assembly
– Respiratory selection, use and care
EN 1146 – Compressed air escape apparatus with
hood
EN 1835
– Light duty supplied air
EN 12941 – Powered respirators – hoods and helmets
EN 12942 – Powered respirator Full face masks
EN 14387 –
Gas & vapour filters
Respiratory Terminology
88
Workplace Exposure Limit (WEL)
Airborne concentration of a Hazardous Substance, averaged over a specified time
period referred to as a Time Weighted Average (TWA).
WEL Time Periods
There are two reference periods for which WELS may be set; 8 hour Time Weighted Average
(TWA) and 15 minute Short Term Exposure Limit (STEL). A substance may be assigned WELS
at either one or both reference periods.
8 hour TWA – some adverse health effects can occur after prolonged or accumulated exposure.
The 8 hour TWA is set to restrict the total intake by inhalation over one or more shifts.
15 minute STEL – Some adverse health effects may be seen after short exposures. 15 minute
STEL may be applied to control these effects.
Immediately Dangerous to Life or Health (IDLH)
The IDLH concentration of a substance is defined as “that which poses a threat of exposure
to airborne contaminants when that exposure is likely to cause death or immediate or delayed
permanent adverse health effects or prevent escape from such an environment”. The IDLH value
represents a maximum concentration from which a worker would escape within 30 minutes
without any impairing symptoms or irreversible health effects.
Under current legislation, employers are responsible for providing
suitable respiratory protection to employees who need it, however
they must also provide training in its use, maintenance of the
equipment and keeping maintenance documents.

Respiratory Protection
Respiratory Protection
89

Respiratory Protection
Disposable Particulate Respirators
FFP1 Valved Respirators
Protection Factor: APF 4
Typical Applications: Low levels (up to 4 x WEL) of fine dust and oil or water-based mists typically found during hand
sanding, drilling and cutting. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009.
Dräger X-plore ® 1310V Moulded Respirator
Pre-formed respirator offering comfort and secure fitting. Provides protection against
fine dust, solid and liquid particles. Assigned Protection Factor = 4. Box of 10
Code: 431085 Manufacturer’s code: 3951212
3M 8812 Cup-Shaped Valved Dust/Mist Respirator
Protection against fine respirable dusts. 3M Cool Flow valve. Assigned Protection
Factor = 4. Box of 10
Code: 292409 Manufacturer’s code: 8812
Respair E P1 Valved Respirator
Excellent comfort and protection. Protects against solid & liquids particles
including oil based mists. Assigned Protection Factor = 4. Box of 10
Code: 430163
MADE IN THE UK
90
3M Aura 9312+ Flat-Fold Valved Dust/Mist Respirator
CONFORMS TO EN149:2001 +A1:2009
3M Cool Flow valve. Soft cover web for comfort and excellent fit. Individually
packed, flat-fold. Assigned Protection Factor = 4. Box of 10
Code: 292744 Manufacturer’s code: 9312+
Dräger X-plore ® 1710V Fold Flat Respirator
Fold flat respirator offering comfort and secure fitting. Provides protection against fine
dust, solid and liquid particles. CoolMAX exhalation valve offering easy breathing and
comfort. Assigned Protection Factor = 4. Box of 10
Code: 431092 Manufacturer’s code: 3951081

Disposable Particulate Respirators
FFP1 Cup-Shaped Unvalved Respirators
A range of reliable quality disposable respirators designed to protect the wearer against solid aerosols, dust, mists,
powders and accompanying odours. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009.
Respiratory Protection
KeepSAFE Cup-Shaped Respirator
Protection against fine non-toxic dusts, fumes. Suitable for dusts generated from
construction, brick, clay, sanding. Agricultural uses - animal feeds, grain, hay, pollen.
Assigned Protection Factor = 4. Box of 20
Code: 282457
Moldex 2360 Classic Series FFP1 Non-valved Respirator
Suited to most industrial applications - Extremely durable & comfortable. DuraMesh ®
for optimum shape retention and durability. ActivForm ® automatically adjusts to
different face shapes. Loop strap for easy application. Box of 20
Code: 290018 Manufacturer’s code: 2360
3M 8710E Cup-Shaped Dust/Mist Respirator
Protection against fine respirable dusts. Assigned Protection Factor = 4. Box of 20
Code: 292452
Manufacturer’s code: 8710E
Dräger X-plore ® 1310 Moulded Respirator
Pre-formed respirator offering comfort and secure fitting. Provides protection against
fine dust, solid and liquid particles. Assigned Protection Factor = 4. Box of 20
Code: 431084 Manufacturer’s code: 3951211
FFP1 Flat Fold Unvalved Respirators
3M Aura 9310+ Flat-Fold Dust/Mist Respirator
Protection against fine respirable dusts. Soft cover web for comfort and excellent
fit. Individually packed, flat-fold. Assigned Protection Factor = 4. Box of 20
Code: 292743 Manufacturer’s code: 9310+
Dräger X-plore ® 1710 Fold Flat Respirator
Protection against fine respirable dusts. Soft cover web for comfort and excellent
fit. Individually packed, flat-fold. Assigned Protection Factor = 4. Box of 20
Code: 431091 Manufacturer’s code: 3951080
91

Respiratory Protection
Disposable Particulate Respirators
FFP2 Fold Flat Respirators
uvex silv-Air 3210
FFP 2 folding mask with valve.
Large exhalation valve for easy air
flow exchange reduces heat and
moisture build-up inside the mask.
Seamless, cotton headband for pressure
free fit, absorbs sweat. Box of 15
Code: 292792
Manufacturer’s code: 8733-210
3M Aura 9322+
Flat-Fold Valved
Dust/Mist Respirator
3M Cool Flow valve. Individually
packed flat fold respirator. Assigned
Protection Factor = 10. Box of 10
Code: 292746
Manufacturer’s code: 9322+
NEW
GVS Segre Folded Masks FFP2
GVS Segre masks are designed to fit every face perfectly with optimum combination
of filter materials makes it easy to breathe and talk through the mask. Box of 15
Valve Re-usable Mask R D Code: 432005 Manufacturer’s code: F20050
Carbon Valve Disposable Mask NR D Code: 432006
Manufacturer’s code: F20055
MADE IN THE UK
Dräger X-Plore ® 1720 FFP2 Fold Flat Respirator
CONFORMS TO EN149:2001 + A1:2009 FFP2 NR D
Fold flat respirator offering comfort and secure fitting. Provides protection against fine dust and solid and liquid
particles found in construction, manufacturing, agricultural and service industries. Assigned Protection Factor = 10
Unvalved Code: 431093 Manufacturer’s code: 3951083 Box of 20
Valved Code: 431094 Manufacturer’s code: 3951084 Box of 10
NEW
Respair Fold Flat P2 Respirator
Respair Fold Flat P2 Respirator.
Unvalved Code: 430803 Box of 20
Valved Code: 430804 Box of 10
MADE IN THE UK
FFP2 Cup Shaped Respirators
92
3M 8322 Cup-Shaped Valved Dust/Mist Respirator
Protection against fine dusts, water- and oil-based mists. 3M Cool Flow valve.
Cushioned lining, braided headbands, M-nose clip offer extra comfort. Assigned
Protection Factor = 10. Box of 10
Code: 292417 Manufacturer’s code: 8322
Moldex AIR Series Valved Respirator
Extremely low breathing resistance for extra comfort and mask durability. Low
breathing resistance due to Moldex Pleated Filter Technology. DuraMesh ® for optimum
shape retention and durability. ActivForm ® automatically adjusts to different face
shapes. Ventex ® - valve reduces moisture and heat inside the mask
3155 - Small Code: 431275 Box of 10
3105 - Medium/Large Code: 431274 Box of 10

Disposable Particulate Respirators
FFP2 Cup Shaped Respirators
NEW
Alpha Solway Disposable
Respirator FFP2 NR
AMF-2V Alpha Flow disposable
respirator protects you from various
particulates. Metal free which is
suitable for the food industry and
they are compatible with various
safety eyewear
Code: 282482
Box of 20
Manufacturer’s code: AMF-2V
Code: 432064
Retail pack of 3
Manufacturer’s code: AMF-2V Retail
Respair E FFP2 Cup Shaped Respirator
Produced to a high standard to ensures the wearer
excellent comfort and protection. Protects against
hazardous dusts & fine dust particles. Assigned
Protection Factor = 10
Code: 430809 Box of 10
Respiratory Protection
Dräger X-Plore ® 1320 FFP2
Moulded Respirator
CONFORMS TO EN149:2001 + A1:2009 FFP2 NR D
Preformed respirator offering comfort and secure
fitting. Provides protection against fine dust and solid
and liquid particles which are found in construction,
manufacturing, agricultural and service industries.
Assigned Protection Factor = 10
Valved Code: 431086 Box of 20
Manufacturer’s code: 3951213
uvex silv-Air 2210 FFP2
Cup Shaped Respirator
FFP 2 preformed mask with valve. Large exhalation
valve for easy air flow exchange reduces heat and
moisture build-up inside the mask. Innovative nose
shape design contours to any facial shape. Seamless,
cotton headband for pressure free fit, absorbs sweat
Manufacturer’s code: 8732-210
Code: 431435 Box of 15
KeepSAFE Cup-Shaped
Valved Respirator
Suitable for use as FFP2 (S) for protection against fine
toxic dusts, fibres, aqueous mists. Additional protection
– oil-based mists or aerosols present when using
cutting oils/lubricants. Exhalation valve lessens heat
build-up. Assigned Protection Factor = 10
Code: 282565 Box of 10
Unvalved Code: 431087 Box of 10
Manufacturer’s code: 3951214
MADE IN THE UK
Respair Cup-shaped Valved Respirator
Protects against hazardous dusts & fine particles.
Assigned Protection Factor = 10. Box of 10
3M 8822 Cup-Shaped Valved
Dust/Mist Respirator
Protection against fine dusts, water-and oil-based mists.
3M Cool Flow valve. Convex shape helps reduce
heat. Comfortable protection, particularly in hot/humid
conditions. Assigned Protection Factor = 10. Box of 10
GVS 2011 FFP2V Disposable Mask
Ref: DME2011UB00
FFP2 disposable mask for protection against dust.
Moulded fit. Easy to adjust straps. Non return inhalation
valve to offer lower breathing resistance. Traffic light
colour valve system. Box of 15
Code: 430806
Code: 292410 Manufacturer’s code: 8822
Code: 431551
Manufacturer’s code: DME2011UB00
93

Respiratory Protection
Disposable Particulate Respirators
FFP3 Cup Shaped Valved Respirators
Protection Factor: APF 20
Typical Applications: Higher levels of fine dust (up to 20 x WEL) and oil or water based mists typically found when handling
hazardous powders in the pharmaceutical industry or work with biological agents and fibres. All particle filtering half masks
featured fully conform to EN 149:2001+A1:2009.
uvex silv-Air 2310
FFP3 preformed mask with valve. Standard Size. Large exhalation valve for easy air
flow exchange reduces heat and moisture build-up inside the mask. Innovative nose
shape design contours to any facial shape. Seamless, cotton headband for pressure
free fit, absorbs sweat. Box of 15
Code: 292791 Manufacturer’s code: 8732-310
uvex silv-Air 2312
FFP3 preformed mask with valve. Smaller cup size suitable for those with narrower
faces. Large exhalation valve for easy air flow exchange reduces heat and moisture
build-up inside the mask. Innovative nose shape design contours to any facial shape.
Seamless, cotton headband for pressure free fit, absorbs sweat. Box of 15
Code: 431437 Manufacturer’s code: 8732-312
NEW
Alpha Solway Disposable
Respirator FFP3 RD
AMF-3V Alpha Flow disposable
respirator protects you from
various particulates and
nuisance odours.
Metal free which is suitable
for the food industry and
they are compatible
with various safety eyewear
Code: 282483
Box of 10
Manufacturer’s code: AMF-3V
Code: 432066
Retail pack of 1
Manufacturer’s code: AMF-3V Retail
NEW
Alpha Solway Disposable
Respirator FFP3 NR
AMF-3CV Alpha Flow disposable
respirator protects you from
various particulates.
Metal free which is suitable
for the food industry and
they are compatible
with various safety eyewear
Code: 282472
Box of 10
Manufacturer’s code: AMF-3CV
Code: 432065
Retail pack of 1
Manufacturer’s code: AMF-3CV Retail
94
3M Particulate Respirator 8835+
CONFORMS TO EN149:2001 + A1:2009
Protection against fine dusts. New filter construction and large surface area for easier
breathing. The 3M Cool Flow valve effectively removes exhaled air, reducing heat
and moisture build up improving comfort. New face seal design reduces fogging of
eyewear. Can be re-used subject to exposure limits. Assigned Protection Factor = 20.
Box of 5
Code: 292494 Manufacturer’s code: 8835+
KeepSAFE Cup-Shaped Valved Respirator
Protection against very fine toxic dusts, fibres, aqueous mists, oil mists, welding fumes
(not Nitrate gases), microbiological hazards. For use in pharmaceutical, iron, steel and
construction industries. Exhalation valve - lessens heat build-up with a greater comfort.
Assigned Protection Factor = 20. Box of 5
Code: 282561

Disposable Particulate Respirators
Respiratory Protection
Moldex 2555 Classic Series
Valved Respirator
Suited to most industrial applications - Extremely
durable & comfortable. DuraMesh ® for optimum shape
retention and durability. ActivForm ® automatically adjusts
to different face shapes. Ventex ® -valve reduces moisture
and heat inside the mask. Box of 20
Moldex AIR Series Valved Respirator
Extremely low breathing resistance due to Moldex
Pleated Filter Technology. Individually bagged. Ventex ® -
valve reduces moisture and heat inside the mask.
Box of 10
Small Code: 431277
Manufacturer’s code: 3255
Medium/Large Code: 431276
Manufacturer’s code: 3205
3M 8833 Cup-Shaped Valved
Dust/Mist/Metal Fume Respirator
Reliable, effective protection against fine particulates.
3M Cool Flow valve. Soft inner face-seal ring -
secure face fit, increases wearer comfort. Cleanable
sealing ring, additional testing – use for more than one
shift. Assigned Protection Factor = 20. Box of 10
Code: 292498 Manufacturer’s code: 8833
Code: 290049 Manufacturer’s code: 2555
Respair E P3V
Valved Respirator
Toxic dusts & fine dust particles.
Assigned Protection Factor = 20.
Box of 5
Code: 430810
Dräger X-plore ® 1330V
Valved Moulded Respirator
Preformed respirator with the added benefit of
CoolMAX exhalation valve Provides protection against
fine dust, solid and liquid particles which are found in
construction, manufacturing, agricultural and service
industries. Assigned Protection Factor = 20. Box of 5
Respair C P3V Valved Cup Respirator
Toxic dusts & fine dust particles. Assigned Protection
Factor = 20. Box of 5
MADE IN THE UK
GVS 3021 FFP3V Disposable Mask
Ref: DME3021UB00
FFP3 disposable mask for protection against dusts
(asbestos, silica etc). Moulded fit. Easy to adjust straps.
Non return inhalation valve to offer lower breathing
resistance. Traffic light colour valve system. Box of 10
Code: 431089 Manufacturer’s code: 3951217
Code: 430165
Code: 431552
Manufacturer’s code: DME3021UB00
95

Respiratory Protection
Disposable Particulate Respirators
FFP3 Flat Fold Valved Respirators
uvex silv-Air 3310
FFP 3 folding mask with valve. Large exhalation valve
for easy air flow exchange reduces heat and moisture
build-up inside the mask. Innovative nose shape
design contours to any facial shape. Seamless, cotton
headband for pressure free fit, absorbs sweat. Box of 15
Code: 431436 Manufacturer’s code: 8733-310
KeepSAFE Flat-Fold Valved Respirator
Protection against very fine toxic dusts, fibres, aqueous
mists, oil mists, welding fumes (not Nitrate gases) and
microbiological hazards. For use in pharmaceutical, iron,
steel, construction industries. Exhalation valve lessens
heat build-up (staple free). Assigned Protection Factor =
20. Box of 10
Code: 282458
Dräger X-plore ® 1730V Fold Flat
Valved Respirator
Fold flat respirator with the added benefit of the
CoolMAX exhalation valve. Easy breathing, comfort and
secure fitting. Provides protection against fine dust, Solid
and Liquid particles which can be found in construction,
manufacturing, agricultural and service industries.
Assigned Protection Factor = 20. Box of 15
Code: 431096 Manufacturer’s code: 3951088
NEW
GVS Segre Folded FFP3 Valve Re-usable Mask R D
Designed to fit every face perfectly with optimum combination of filter materials
makes it easy to breathe and talk through the mask. Box of 15
Valve Re-usable Mask R D Code: 432007 Manufacturer’s code: F20050
Carbon Valve Disposable Mask NR D Code: 432008
Manufacturer’s code: F20055
MADE IN THE UK
FFP3 Non-Valved
Respirators
MADE IN THE UK
96
Respair P3V Fold Flat Respirator
Vertically folded and individually wrapped. Lightweight.
Protects against toxic dusts & fine particles. Assigned
Protection Factor = 20. Box of 10
Code: 430805
3M Aura 9332+ Flat-Fold Valved
Dust/Mist/Metal
Fume Respirator
Soft cover web - for comfort and excellent fit. 3M
Cool Flow valve. Individually packed, flat fold.
Assigned Protection Factor = 20. Box of 10
Code: 292747 Manufacturer’s code: 9332+
Moldex AIR Series
Non-Valved Respirator
Low breathing resistance due to Moldex Pleated Filter
Technology. Medically approved Type llR. Latex & PVC
Free. Individually bagged
Size: Small Code: 431273
Manufacturer’s code: 3250
Size: Medium/Large Code: 431272
Manufacturer’s code: 3200

Particulate & Speciality Respirators
Respiratory Protection
MADE IN THE UK
Moldex 3405 Air Re-useable Valved Respirator
Re-useable FFP3 Mask - Suited to most industrial applications. DuraMesh ® for
optimum shape retention and durability. ActiveForm ® automatically adjusts to different
face shapes. Ventex ® valve reduces moisture and heat inside the mask. Washable full
face seal. Low breathing resistance due to Moldex Pleated Filter Technology. Box of 5
Code: 290015 Manufacturer’s code: 3405
GVS 3031 FFP3V Re-Usable Mask Ref: DME3031UB00
FFP3 Re-Usable mask for protection against dusts (asbestos, silica etc). Moulded fit.
Easy to adjust straps. Non return inhalation valve to offer lower breathing resistance.
Traffic light colour valve system. Box of 5
Code: 431553
Manufacturer’s code: DME3031UB00
Welding Fume Respirators
3M 9922 Valved Particulate/Nuisance Level Organic
Vapour Relief Respirator
CONFORMS TO EN 149:2001 FFP2 NR D
Protection against fine dusts, oil- and water-based mists, welding respiratory hazards
(i.e. Fumes, ozone). Relief from unpleasant odours plus nuisance levels of organic
vapours from solvents, degrease, resins. 3M Cool Flow valve. For woodworking,
foundry operations, waste management, lab settings, agriculture, petrochemical,
welding. Assigned Protection Factor = 10. Box of 10
Code: 292493 Manufacturer’s code: 9922
3M 9928 Valved Soft Seal Welding Fume Respirator
CONFORMS TO EN 149:2001 FFP2 R D
Protection against oil/water-based mists, fine dusts, metal fumes and ozone. 3M Cool
Flow valve. Soft inner face seal ring can be wiped clean - for more than one shift.
Assigned Protection Factor = 10. Box of 10
Code: 290567 Manufacturer’s code: 9928
3M 9913 Dust/Mist Nuisance Odour Respirator
CONFORMS TO EN 149:2001 FFP1 NR D
Protection against fine dusts, unpleasant smells, nuisance levels of organic vapours.
Lightweight, comfortable. Convex shape, twin-strap, nose-clip. Good conformance to
most face shapes and sizes. Assigned Protection Factor = 4. Below WEL for organic
vapours. Box of 20
Code: 290001 Manufacturer’s code: 9913
Respair Carbon P2V
Nuisance Odour Fold
Flat Respirator
Conforms to EN 149:2001
+ A1:2009 (nr)
Organic vapour/nuisance levels of
ozone gas. Assigned Protection Factor = 10. Box of 10
Code: 430802
Manufacturer’s code: WELDAIRP2V
MADE IN THE UK
97

Respiratory Protection
Reusable Respirators - Half Masks
GVS Elipse Half Mask with Ready Fitted P3 Nuisance Odour
Filters
For protection against harmful particles and nuisance fumes, with filters ready
fitted. Extremely lightweight and compact to give the wearer as much comfort as
possible A unique and low profile filter designed to fit the contours of your face to
give you maximum field of vision . Low breathing resistance to reduce the risk of
user fatigue and to add additional comfort . Fitted with a charcoal pad to help filter
nuisance odours. Sizes: S/M, M/L
Code: 431929
Manufacturer’s code: SPR337/502
GVS Elipse P3 Nuisance Odour Replacement Filters
Pack of 2
Code: 431930
Manufacturer’s code: SR336
MADE IN THE UK
GVS Elipse Dust Mask Carry Case
Hard storage case for GVS Elipse P3 and P3 Nuisance Odour half masks. Hard Carry Case for the GVS Elipse
Respirator. Fits both size respirators SPR299, SPR501, SPR337 and SPR502. Durable hard carry case that protects
and stores the mask when not in use. Strong nylon loop in the back allows the case to be worn on the belt or
attached in other various ways
Code: 431536
Manufacturer’s code: SPM001
MADE IN THE UK
GVS Elipse Half Mask Respirator
with Ready Fitted P3 filters
CONFORMS TO EN 140:1998 AND EN 143:2000. APF:20
Perfect for everyday use in construction and utilities through to the more
demanding environments of metalworking, welding & stonemasonry. Latex and
silicone free, lightweight TPE face piece that is comfortable to wear for long
periods of time. Low profile filters provide unobstructed field of vision. Suitable
against Silica Dust. Weighs less than 135g with filters. Sizes: S/M, M/L
Code: 292261
Manufacturer’s code: SPR299/501
GVS Elipse P3 Construction Dust Replacement Filters
Pack of 2
Code: 292262
Manufacturer’s code: SPR316
MADE IN THE UK
GVS Elipse Half Mask Respirator
with Ready Fitted a1-p3 filters
CONFORMS TO EN 140:1998 AND EN 14387:2004. WITH P3 APF:20
Designed to protect against solid and liquid particles such as dusts and mists, along
with vapours and organic gases. Used in a variety of workplace applications including
petrochemical, chemical manufacturing, construction, transportation, paint spraying
and solvents. Latex and silicone free, lightweight TPE face piece that is comfortable to
wear for long periods of time. Low profile filters provide unobstructed field of vision.
Sizes: S/M, M/L
Code: 292263
Manufacturer’s code: SPR338/503
GVS Elipse A1-P3 Organic Gases & Vapours Replacement Filters
Pack of 2
Code: 292264
Manufacturer’s code: SPR341
MADE IN THE UK
Retail Display Options
Contact us for more details
98

Reusable Respirators - Half Masks
NEW
NEW
MADE IN THE UK
Respiratory Protection
MADE IN THE UK
MADE IN THE UK
GVS Elipse
Integra Half
Mask Respirator
with Ready
Fittted P3 Filters
GVS Elipse Integra Half Mask with
Ready Fitted ABEK1P3 Filters
CONFORMS TO EN166, EN140 AND EN14387
Integrated with safety eyewear to offer both
respiratory and eye protection. ABEK1P3 combination
filters to protect against multiple gasses, vapours
and dust particles . Anti-mist and Anti-scratch KN
rated lens. Curved filter technology to offer a more
compact fit. Extremely lightweight, only 441gm.
Made in the UK. Available in S/M and M/L
GVS Elipse Integra Half Mask with
Ready Fitted A2P3 Filters
CONFORMS TO EN166, EN140 AND EN14387
Integrated with safety eyewear to offer both
respiratory and eye protection. A2P3 combination
filters to protect against organic vapours and dust
particles. Anti-mist and Anti-scratch KN rated lens .
Curved filter technology to offer a more compact fit
.Extremely lightweight, only 441gm. Made in the UK.
Available in S/M and M/L
CONFORMS TO EN 140: 1998 AND EN 143: 2000 APF200
Integrated safety goggle with respirator in one complete
unit. When fitted correctly, the goggle cannot steam.
K & N anti-mist and anti-scratch coatings as standard.
Manufactured in the UK. Available in S/M and M/L
Code: 292259
Manufacturer’s code: SPR407/406
GVS Elipse P3 Construction Dust
Replacement Filters
CONFORMS TO EN166 AND EN143
Pack of 2
Code: 432403 Manufacturer’s code: SPR 534/35
Code: 432404
Manufacturer’s code: SPR536/37
Code: 292262
Manufacturer’s code: SPR316
GVS Elipse Integra Replacement
ABEK1P3 Filters
CONFORMS TO EN143
Pack of 2
Code: 292276
Manufacturer’s code: SPR492
GVS Elipse Integra Replacement
A2P3 Filters
CONFORMS TO EN143
Pack of 2
Code: 292278
Manufacturer’s code: SPM524
GVS Elipse Integra
Carry Casee
Manufacturer’s code: SPM007
Code: 432061
MADE IN THE UK
MADE IN THE UK
GVS Elipse Half Mask
with Ready Fitted A2P3 Filters
GVS Elipse Half Mask
with Ready Fitted ABEK1P3 Filters
GVS Elipse Integra Mask
with Ready Fitted A1-P3 RD Filters
CONFORMS TO EN140 AND EN14387
For protection against Organic vapours, dusts, mists and
fumes. Compact and lightweight. Manufactured in UK.
Extremely low breathing resistance.
Available in S/M and M/L
CONFORMS TO EN140 AND EN14387
Protection against vapours, ammonia, acid gases,
dusts, mists and fumes. Compact and lightweight.
Manufactured in UK. Extremely low breathing resistance.
Available in S/M and M/L
CONFORMS TO EN166, EN140 AND EN14387
Integrated safety goggle with respirator in one complete
unit. When fitted correctly, the goggle cannot steam.
Anti-mist and anti-scratch coatings as standard.
Manufactured in the UK. Available in S/M and M/L
Code: 431529
Manufacturer’s code: SPR496
Code: 431532
Manufacturer’s code: SPR491
Code: 431535
Manufacturer’s code: SPR444
GVS Elipse
Replacement
A2P3 Filters
GVS Elipse
Replacement
ABEK1P3 Filters
GVS Elipse
Replacement
A1-P3 RD Filters
CONFORMS TO EN14387
Pack of 2
CONFORMS TO EN14387
Pack of 2
CONFORMS TO EN14387
Pack of 2
Code: 431530
Manufacturer’s code: SPR497
Code: 431533
Manufacturer’s code: SPR492
Code: 292264
Manufacturer’s code: SPR341
99

Respiratory Protection
Reusable Respirators - Half Masks
ALL CONFORM TO EN 140
3M Reusable Half Mask Respirator Kit
CONFORMS TO EN 140
3M medium half mask with A2P3R filters. Soft silicone face piece for comfort and
durability. Balanced, secure fit. Low maintenance for maximum convenience.
Replaceable filters
Size: Medium Code: 292601 Manufacturer’s code: RTU7523M8
Size: Large Code: 430764 Manufacturer’s code: RTU7523L
3M 7500 Series Half Mask Respirator
CONFORMS TO EN 140
Ultimate in comfort and advanced technology. Very pliable face seal – exceptional
comfort and fit. Innovative exhalation valve – decreases breathing resistance. Silicone
mask. Supplied without filters
Size: Medium Code: 292606 Manufacturer’s code: 75024
Size: Large Code: 292607 Manufacturer’s code: 7503
3M 6500 Series Reusable Half Mask Respirator
CONFORMS TO EN 140
Long-lasting stability & durability. Rugged comfort. Adjustable head harness assembly.
Quick latch drop down mechanism. Low profile, easy maintenance design. Silicone
face seal. 3M Cool-Flow valve provides a cooler, more comfortable wear.
Supplied without filters
Size: M,L Code: 292603 Manufacturer’s code: 6500
3M 6000 Series Half Mask Respirator
CONFORMS TO EN 140
Classic, lightweight, industry standard. Dependable lightweight value.. Combines good
protection with economy in use. Low maintenance (only selected spares available).
Supplied without filters
Size: Medium Code: 292630 Manufacturer’s code: 6200M
Size: Large Code: 292631 Manufacturer’s code: 6300L
100

Reusable Respirators - Half Masks
3M 4000 Series
Maintenance-Free
Reusable Respirators
The 4000 Series is a range of ready-to-use, maintenance-free half
masks designed for effective and comfortable protection against a
combination of many gases, vapours and particulate hazards found
throughout industry. Utilising unique filter technology enables a very lowprofile
design for undisturbed field of vision to make your work life more
comfortable.
Features and Benefits:
Facepiece
Low profile design for better peripheral vision
Lightweight, well balanced design
Soft, non-allergenic material with textured face seal
Built-In Filters
Four versions available, each offering protection against different hazards found
throughout industry
One piece, maintenance-free construction
Exhalation Valve
Central position for effective removal of heat and moisture build-up within face piece
Adjustable Head Cradle and Neck Straps
Stable secure fit
Easy to fasten neck strap
Respiratory Protection
Convenience Respirators
Where the respirator is used for more than one shift, and
disposed of within a month, record keeping is not required under
CoSHH. The only maintenance, apart from daily visual inspection,
is the cleaning of the face seal for hygiene requirements. For
advice on current selection of 3M respiratory protective
equipment please get in touch.
4251 4255 4277 4279
3M 4000 REUSABLE RESPIRATORS
CONFORMS TO EN405:2001
PROTECTION AGAINST:
3M
CODE
DESCRIPTION
PROTECTION
GASES/VAPOURS PROTECTION
LEVEL
ORGANIC
GASES/
VAPOURS
INORGANIC
GASES/
VAPOURS
ACID
GAS
AMMONIA
PARTICULATES:
FFP2: 10×WEL
(water and oil
based)
PARTICULATES:
FFP3: 20×WEL
(water and oil
based)
TYPICAL APPLICATIONS
CODE
4251
Organic vapour/
particulate respirator
A1
P2
10×WEL or 1000ppm
(whichever is the lowest)
General paint spraying/
Adhesive spraying/Creosoting/
Solvent spraying/Paint stripping/
Boat building/Vehicle Manufacturing
292484
4255
Organic vapour/
particulate respirator
A2
P3
10×WEL or5000ppm
(whichever is the lowest)
General paint spraying/Adhesive spraying/
Mixing agricultural chemicals/Creosoting/
Solvent spraying/Paint Stripping/
Boat building/Aerospace Manufacturing/
Vehicle Manufacturing
292435
4277
Organic vapour/
Inorganic and acid
gas particulate
respirator
A1 B1 E1 P3
10×WEL or 1000ppm
(whichever is the lowest)
Burn stripping for paint removal/
Electro-plating/Grinding/ Polishing/
Finishing cured epoxy resins/
Metal Pickling/Metal etching/Acid cleaning
292406
4279
Organic vapour/
Inorganic, acid
gas and ammonia
particulate respirator
A1 B1 E1 K1 P3
10×WEL or 1000ppm
(whichever is the lowest)
Burn stripping for paint removal/
Using ammonia solutions/Agrochemicals/
Manufacture and maintenance of
refrigeration equipment
290511
101

Respiratory Protection
Reusable Respirators - Half Masks
ALL CONFORM TO EN 140
NEW
Respair TP 100 Half Face Mask
CONFORMS TO EN140
Twin cartridge respirator combined with a 4 point
suspension harness with quick release buckles
offers superior comfort. Comes without filters
Code: 432002
Manufacturer’s code: TP100
MADE IN THE UK
Respair TP 100
Half Face Mask
P3 Filter
Code: 432001
Manufacturer’s code: TP100
102
Scott Safety AVIVA 40 Half Mask
CONFORMS TO EN140
Single filter half mask utilising the Pro2000 range of filter. Reflex seal absorbs facial
movements, maintaining protection. Easy to use leak check mechanism. Goggle pinch
- designed for improved eye PPE integration. Enhanced voice intelligibility. Comfortable,
durable head cradle suitable for use underneath headwear
Size: S, M, L Code: 430765 Manufacturer’s code: 800501/2/3
Moldex 7000 Series Reusable Half Mask Respirator
CONFORMS TO EN 140
Extremely lightweight and comfortable. Use with EASYLOCK Filters - which require no
additional clips or holders. Low profile design for excellent field of vision. Easy to clean
& maintain. Supplied without filters
Size: S, M, L Code: 292304 Manufacturer’s code: 7001/2/3

Reusable Respirator Half Masks & Full Masks
Respiratory Protection
Dräger X-plore ® 3500 Construction
Set Respirator + P3 Filters
CONFORMS TO EN 140
Half mask.Ideal kit for many construction related
activities. Built around the X-plore ® 3500 half face
respirator. Robust, comfortable and suitable for
demanding work areas. FlexiFit head cradle which
can be worn under safety helmets. Includes two P3
Particulate filters
Code: 431104
Manufacturer’s code: R56960
Dräger X-plore ® 3300 Painter Set
Respirator + A2 P3 Filters
CONFORMS TO EN 140
Half mask. Ideal kit for many painting activities. Built
around the X-plore ® 3300 low maintenance, economical
half face respirator. Lightweight, extremely comfortable
and friendly to the skin. FlexiFit head cradle which can
be worn under safety helmets. Includes two A2 P3
Organic Gas/Vapour/Particulate filters
Code: 431103
Manufacturer’s code: R57793
Dräger X-plore ® 3300 Chemical Set
Respirator + A1B1E1K1HGP3
CONFORMS TO EN 140 FILTERS & EN 14387
Half mask. Ideal kit for use in many chemical
industry related activities. Built around the X-plore ®
3300 low maintenance, economical half mask.
Lightweight, extremely comfortable and friendly
to the skin. FlexiFit head cradle which can be
worn under safety helmets. Includes two A1 B1
EK1 HG P3 Organic, inorganic and acid gases &
vapours, Ammonia, Mercury Vapour and Particulate
combination filters
Code: 431099
Manufacturer’s code: R57794
Full Face Mask
Dräger X-plore ® 5500
full face respirator
Double layer face seal with triple sealing action ensuring reliable secure leak free
protection. Swept back low-profile filter position. Distortion free, polycarbonate impact
resistant lens. Easily adjustable head harness for secure and balanced fit
Code: 431110
Manufacturer’s code: R55270
MAIN FEATURES
• Double layer face seal
• Low profile filter position
• Wide angle lens
• Easily adjustable head harness
• Triple sealing action
Dräger Spare Filters
TO FIT DRÄGER X-PLORE ® 3300/3500 HALF MASK AND 5500 FULL FACE RESPIRATOR
CONFORMS TO EN 143:2000/A1 AND/OR EN 14387
Type & Colour
Code
P3
Application
X-plore ® bayonet fit particulate filter.
Manufacturer’s code: 6738354
Code
431050
A2
P3
X-plore ® bayonet fit Organic Gas, Vapour and particulate
combination filter. Manufacturer’s code: 6738875
431030
A1 B1 E1
K1 Hg P3
X-plore ® bayonet fit Organic, Inorganic and acid gases
and vapours, Ammonia, Mercury Vapour and Particulate
combination filter. Manufacturer’s code: 6738817
431026
103

Respiratory Protection
Reusable Respirator Full Face Masks
ALL CONFORM TO EN 136
Moldex 9000 Series Full Face Respirator
CONFORMS TO EN 136
Use with EASYLOCK Filters - which require no additional clips or holders.
Panoramic lens with excellent Periphery Vision. Lightweight,easy to clean &
maintain. Mask body is gentle to the skin. Supplied without filters - see page 107
Size: S, M, L Code: 431278 Manufacturer’s code: 9001/2/3
104
Scott Safety Vision 2 Full Face Respirator
CONFORMS TO EN 136
Unique visor – almost unrestricted, optically perfect vision. Fully maintainable. High
performance. Liquid silicone rubber faceseal – non-dermatitic. Extremely soft/
comfortable. Supplied without filters
Code: 290136
Manufacturer’s code: RFF1000/ML
3M 6000 Series Class 1 Full Face Respirator
CONFORMS TO EN 136
Class 1 full face mask. Protection against respiratory hazards plus eye and face
protection. Eye impact protection (medium energy) EN 166 B. Excellent field of vision.
Maximum comfort, good economy in use. Silicone face-piece.
Supplied without filters
Size: Medium Code: 292267 Manufacturer’s code: 6800S
Size: Large Code: 292266 Manufacturer’s code: 6900S

Reusable Respirator Full Face Masks
Respiratory Protection
Dräger FPS ® 7000 Full Face Respirator
CONFORMS TO EN 12942 - TM3 (IN COMBINATION WITH X-PLORE ® 8500)
Robust and skin friendly EPDM, highly flexible at high/low temperatures. Shock proof
and shock resistant. Provides the highest protection level based on a reliable tight fit
due to a double sealing frame
Size: Small Code: 431322 Manufacturer’s code: R56502
Size: Medium Code: 431323 Manufacturer’s code: R56310
Size: Large Code: 431554 Manufacturer’s code: R56503
Dräger X-plore ® 6300 Full Face Mask
CONFORMS TO EN 136 CLASS 2 (CE MARK), NIOSH, AS/NZS
Made from robust and hypoallergenic EPDM, featuring a double layer face seal.
Comfort fit on just about any shape of face with its universal “one size fits all”.
Anti fog visor. Scratch proof and distortion free visor offering 180° wide angle
Code: 431320
Manufacturer’s code: R55800
Dräger X-plore ® 6530 Full Face Mask with PC Visor
Polycarbonate visor
Code: 431321
Manufacturer’s code: R55795
Powered Respirators
Scott Safety Proflow Powered Respirators
• Electronically maintained level airflow
throughout usage
• Continuous display of battery and filter status
• No user calibration or servicing necessary
• 3 year/1800 hours blower warranty
• Extremely low through-life costs
• Automatic data-logging to in-board
microprocessor
Scott Safety Proflow Promask Full Face Mask Respirator
CONFORMS TO EN136 CLASS 3
012681 - Full face respirator used either with a Pro 2000 filter (negative
pressure), powered air, or a compressed-air-line supply (positive pressure). Unique,
contoured T-profiling sealing edge – superior fit. Computer designed air path
channels – exceptionally low airflow resistance, reducing fatigue. Wide panoramic
visor – maximises field of vision. Front mounted speech diaphragm – easy
communication. Directed airflow prevents visor misting. Filter positioning reduces
neck strain, permits good downward visibility. For Particulate: Assigned Protection
Factor = 40. For Gas: Assigned Protection Factor = 20. Supplied without filters
Code: 018179 Manufacturer’s code: 012681
105

Respiratory Protection
Filter Cartridges
3M FILTER SELECTION
Revolutionary 3M service life indicator technology
Deciding when to change gas & vapour filters can be a challenge. Some users
change their filters only when they can detect contaminant odour, taste, or irritation
inside the respirator, with the result that the harmful substance has already broken
through. Others change their filters on a pre-determined schedule, potentially
discarding still usable filters.
The 3M 6051i & 6055i Organic Gas & Vapour Service Life Indicator Filters
contain an easy-to-interpret visual End of Service Life indicator (ESLI) to help users
in appropriate environments determine when to change their filters. This unique and
innovative technology is compatible with all 3M Half and Full-Face Masks and
provides increased confidence in protection, optimised filter use and peace of mind.
Particulate Filters
Filter Type Filter No. Protection Code
P2R 3M 2125 Particulates only 292637
P2R 3M 2128 Particulates, ozone, nuisance level organic vapours and acid gases 292640
P3R 3M 2135 Particulates only 292638
P3R 3M 2138 Particulates, ozone, nuisance level organic vapours and acid gases 292632
Gas and Vapour Filters
Filter Type Filter No. Protection Code
A1 3M 6051 Organic Vapour - Class 1 292633
A1 3M 6051i Organic Vapour with Service Life Indicator - Class 1 292648
K1 3M 6054 Ammonia - Class 1 292634
A1 B1 E1 3M 6057 Organic and Inorganic Vapours and Acid Gas - Class 1 292636
A1 B1 E1 K1 3M 6059 Organic and Inorganic Vapours, Acid Gas and Ammonia - Class 1 292265
A1 Formaldehyde 3M 6075 Organic Vapour - Class 1 and Formaldehyde 293301
A2 3M 6055 Organic Vapour - Class 2 292635
A2 3M 6055i Organic Vapour with Service Life Indicator - Class 2 292649
A2 B2 E2 K2 P3 3M 6099
Organic and Inorganic Vapours, Acid Gas, Ammonia -
Class 2 and Particulates; Full Face Masks only
290124
AX
(single shift use only)
P3 3M 6098
Organic Vapours with a boiling point below 65oc; Full Face
Mask & single shift use only
292699
Particulate Filters to use with Gas and Vapour Filters
Combine with 3M 6000 Series Gas and Vapour Filters for added Particulate Protection using the 3M 501 Filter Retainer.
Filter Type Filter No. Protection Code
P1R 3M 5911 Particulates only 292445
P2R 3M 5925 Particulates only 292663
P3R 3M 5935 Particulates only 292662
Filter Retainer 3M 501 n/a 292441
106

Filter Cartridges
SCOTT SAFETY FILTER SELECTION
Scott Pro 2000 canister filters offer a range of solutions
for your specific respiratory challenges, providing high
quality yet cost effective protection.
Low weight, with a low breathing resistance, Pro 2000
filters are manufactured using the highest specification
media and materials to support wearers through the
most demanding applications.
The particulate-specific filters offer unrivalled efficiency
against dust, smoke, welding fumes, mist, microorganisms
and radio-active particles, whilst the Gasspecific
cartridges give extended absorption capacity for
gases and vapours. Combined cartridges are suitable for
both gaseous and particulate contaminants.
Pro 2000 filters are approved to the latest EN standards,
marked ‘R’ for re-usable (EN 143:2000/ A1:2006), CE
certified, and connect via a 40 mm EN 148-1 thread.
CE approvals: EN 143, EN 14387, CE 0121.
Respiratory Protection
Scott Safety Pro 2000 Filter Canisters
To fit Scott Safety AVIVA 40, Vision 2 Full Facemask, Duraflow Powered Air Respirator. 042799 not approved for half masks
Type & Colour Code Application Code
A2
P3
042670 - Organic Gases and Vapours with a boiling point of 65˚C or above, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria
and Viruses.
293039
B2 P3 042671 - Inorganic Gases and Vapours, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 292781
A2 B2 E2 K2 P3 042799 - Organic, Inorganic, Acid Gases and Vapours, Ammonia, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 293091
P3 052670 - Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 293045
MOLDEX SAFETY FILTER SELECTION
Moldex EASYLOCK Filter System To Fit Moldex 7000 Series Half Masks and 9000 Series Full Face Masks to EN 14387:2004 and EN 143:2000
Type & Colour Code Application Code
A1 9100 - Organic Gases and Vapours with a boiling point above 65˚C 431353
A1 B1 E1 K1 9400 - Organic, Inorganic, Acid Gases and Ammonia with a boiling point above 65˚C 431354
P3 9030 - Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 431355
107

Respiratory Protection
Powered and Supplied Air Systems
Benefits of the 3M
Modular Approach
3M have developed a
comprehensive approach to
worker protection systems
based on comfortable-to-wear
modules.
Each system incorporates easyto-select
modules that can be
combined into dozens of system
configurations. Users can mix
and match modules as they
move from one environment to
another, or from one application
to the next. This provides plugand-play
adaptability for the
continually evolving demands of
your workplace.
Powered or Supplied Air System?
Powered Air System
Incorporates a battery powered motorised fan to draw air through a filter
Cannot be used to protect against substances with poor warning properties (taste/smell)
Supplied Air System
Air is supplied from a compressor (compressed air must be of breathable quality)
Can be used to protect against substances with poor warning properties (taste/smell)
Must not be used in conditions that are Immediately Dangerous to Life or Health (IDLH)
Suitable for use over long shifts - no increase in breathing resistance
Can offer integrated head, eye and face protection
Selection Process for Powered Air System
Stage 1
Select the Starter Kit
Stage 2
Choose a headtop
Stage 3
Choose additional components for specific applications or environments
Eg: heavy-duty breathing tubes, specialist filters etc
Selection Process for Supplied Air System
Stage 1
Belt Unit
Stage 2
Belt Unit Coupling
Stage 3
Hose
Stage 4
Hose Coupling Set
Stage 5
Breathing Tube
Stage 6
Headtop
108
For more information on 3M Respiratory Protection Get In Touch with us to find out more

Speciality Respirators and Kits
3M Versaflo TR-300+ Powered Air Respirator
The 3M Versaflo range simplifies the equipment selection process, increases system
versatility and improves user comfort every step of the way.
TURBO UNIT
3M Versaflo TR-302E+ Powered Air Turbo Unit
This new lightweight turbo unit is the key to an easy-to-use,
versatile respiratory protective system for environments with
hazardous particles. Battery charge indicator on the battery, plus
the 2 selectable flow rate options - 185l/mn and 205l/mn - offer
more comfort to the user
Code: 277300 Manufacturer’s code: TR-302E
Respiratory Protection
3M Versaflo Powered Air Respirator
System TR-600
The new 3M Versaflo Powered Air Respirator System
TR-600 provides protection against particles, gases or
vapours, or against a combination of these depending on the
type of filter used. The turbo has selectable multiple airflows
through a simple, intuitive, easy to use two-button operation
and the particulate filter and battery status indicators provide
constant updates during use. The modern, low profile design
keeps weight close to the back resulting in greater comfort.
Airflow selection –delivering a world of comfort to you. Also
available as a starter kit (pictured).
Code: 277335 Manufacturer’s code: TR-600
3M Versaflo TR-315+ Powered Air
Starter Kit
Comfortable Airflow
• Two user selectable flow rates to maximise comfort: 185l/
min and 205l/min
• Controlled airflow delivers steady flow as battery
discharges or filter loads with particulates
Ease of Use
• Electronic audible and visual alarm in case of low battery
and/or low air flow
• TR-300+ display shows battery charge status, particulate
filter loading status during use as well as selected airflow
• Charge status is indicated by a useful LED display on the
battery as well as the outer case
• No user calibration of turbo required
Comfort
• Light and small – extremely slim, lightweight, balanced
design for comfort
Multiple Applications
• High efficiency filter captures hazardous dust, mist and
fume plus options for nuisance level gases and vapours
• IP53 rating. Suitable for use in decontamination shower
Safety
• Approved to EN 12941, TH2 or TH3 depending on headtop
This Starter Kit includes the TR-302E+ Turbo Unit, Particulate
Filter, Pre-filter, Standard Belt, High Capacity Battery Charger
Kit, Self-adjusting Breathing Tube and Air Flow Indicator.
277301
If you have specific system requirements you can make up your own system with the following components:
Turbo Unit
3M Versaflo TR-302E+ Powered Air Turbo Unit
This new lightweight turbo unit is the key to an easy-to-use, versatile
respiratory protective system for environments with hazardous
particles.
This unit comes with an Air Flow Indicator only. 277300
Batteries (lithium ion) and Chargers
TR-330 Standard Battery Pack 277304
TR-332 High Capacity Battery Pack (longer life) 277305
TR-341UK Single Station Battery Charger Kit 277306
TR-344UK 4-Station Battery Charger Kit 277307
Filters
TR-3600 Pre-filter 277308
TR-2712E Particulate Filter (P) 277309
TR-3802E P+Nuisance Level Organic Vapour Filter 277310
TR-3822E P+Hydrogen Fluoride +Nuisance Level Acid Gas Filter 277311
Breathing Tubes
BT-30 Length-adjusting Breathing Tube 277312
BT-40 Heavy Duty Rubber Breathing Tube 277313
109

Respiratory Protection
3M Jupiter Powered Air Respirator
The many advanced features of the 3M Jupiter Turbo Unit take powered air respiratory protection
into a new dimension of comfort and flexibility. Easy to maintain and use, it can feed any one of a
wide range of different headtops for many hazardous environments. Wide choice of gas, vapour
and particle filters for a broad range of applications.
Comfort
• Mounted on an ergonomic comfort belt
for a snug fit that remains comfortable
even after hours of wear
Alarm
• Electronic audible and visual alarm in
case of low battery and/or low air flow
Filters
• Range of filter canisters for gases,
vapours and particles
• Filter cover which prevents spark damage
and allows shower decontamination
Straightforward Care
and Maintenance
• Smooth shape and Decontamination
Belt allows easy cleaning
3M Jupiter Powered Air Starter Kit
This Starter Kit includes a standard Jupiter Powered Air Turbo including Decontamination Belt and
Clip, Filter Gaskets, Air Flow Indicator and Calibration Tube as well as a pair of Organic Vapour and
Particulate (A2P) Filters, Pre-filters, Length-adjusting Breathing Tube, 8 hour Rechargeable Battery
(NiMH) and a Battery Charger. Manufacturer’s code: RTU JUP
Now choose your headtop 276801
If you have specific system requirements you can make up your own system with the following components:
Turbo Unit
3M Jupiter Turbo Unit
Includes Decontamination Belt, Air Flow Indicator and
Calibration Tube
Filters
276802
P Filter 290095
A2P Filter 290096
ABE1P Filter 290098
A2BEK1P Filter 290097
Pre-filter Pack 290105
Batteries and Chargers
Battery Pack - 8 hour 200297
Battery Pack - 4 hour 200292
Battery Pack - 4 hour (intrinsically safe with pouch kit) 200419
Intelligent Battery Charger 200298
Note: A Jupiter Turbo Unit that has been used in a dust environment without an intrinsically safe pouch fitted,
should never be used for intrinsically safe applications.
Breathing Tubes
BT-30 Length Adjusting Breathing Tube 277312
BT-40 Heavy Duty Rubber Breathing Tube 277313
110
For more information on 3M Respiratory Protection Get In Touch with us.

Powered Respirators
3M Versaflo S-Series Headcovers and Hoods
3M Versaflo S-Series Headcovers and Hoods have been designed using the latest computer modelling
techniques to ensure a high level of comfort. They provide eye and face protection to EN 166 and are available
in a range of fabrics and designs to suit different applications.
Respiratory Protection
Meets highest respiratory class - TH3
Comfortable to wear for long periods
Excellent air flow
Improved visibility
Assigned Protection Factor (APF)
• When used with TR-300+, Jupiter and V-500 - APF 40
Integrated Suspension Headcovers
• Ready to use straight out of the box
• Suitable for applications that require frequent replacement
of the entire headtop assembly
• Wide faceseal with soft elastic for improved comfort and
reduced noise
• Available in two adjustable sizes: S/M and M/L
3M Versaflo Headcover S-133
• Head and face coverage, as well as
providing eye and face protection to
• EN 166 - liquid splash and low energy
impact
• General purpose, cost effective fabric
Code: 277123
3M Versaflo Hood S-433
• Similar to S-133 but with additional neck
and shoulder protection
Code: 277124
Premium Reusable Suspension Hoods
Cost-effective choice for some high disposal rate environments
Just the soiled hood fabric is replaced, while the suspension and
air ducting can be reused.
Innovative Head Cradle with Adjustable Airflow
Open valve
Closed valve
3M Versaflo Hood S-657 Starter Kit
• Starter Kit includes 1x Head Cradle and 1x
S-607 Overhood
277332
3M Versaflo S-607 Replacement
Overhood
• Head, face, neck and shoulder coverage, as
well as providing eye and face protection
to EN 166 - liquid splash and low energy
impact
• S-657 uses a double shroud design for its
respiratory seal
277331
3M Versaflo Hood S-855 Starter Kit
• Starter Kit includes 1x Head Cradle and 1x
S-805E Overhood
277334
3M Versaflo S-805E Replacement
Overhood
• Head, face, neck and shoulder coverage, as
well as providing eye and face protection
to EN 166 - liquid splash and low energy
impact
• S-805E incorporates a comfortable knitted
inner collar.
277333
The external cover lets wearers control the location of the airflow
111

Respiratory Protection
Supplied Air Respirators
3M Versaflo M-Series Headtops
The 3M Versaflo M-Series features lightweight, compact and well-balanced faceshields and helmets
that offer protection from a range of respiratory, impact and splash hazards.
Integrated Protection for Multiple Hazards
• Provides protection from specific respiratory,
head and eye hazards
• Optional hearing protection
Modern, Well Balanced Design
• Lightweight with excellent balance
• Fully-adjustable head suspension
• A deflector allows users to direct the airflow inside the
headtop for increased control and comfort
Straightforward Care and Maintenance
• Spare parts and accessories are quick, easy
and intuitive to replace
Visor Design
• Visor design combines excellent peripheral and
down ward vision with good optical clarity
• Lenses provide chemical and scratch resistance
Assigned Protection Factor (APF)
• When used with TR-300+, Jupiter or V-500 - APF 20 (M-100)
or APF 40 (M-300, APF 20 with Jupiter and M-400)
SNR
30
3M Versaflo M-100 Series Faceshields -
For Respiratory, Eye And Face Protection
• Two options for different applications:
• M-106 features a general purpose faceseal for dusts,
spraying and chemical processing
277350
• M-107 features a flame resistant faceseal for
applications with hot particles.
277351
3M Versaflo M-300 Series Helmets -
for respiratory, eye, face and head protection
• Two options for different applications:
• M-306 features a general purpose faceseal for construction,
chemical applications and heavy industry
277352
• M-307 features a flame resistant faceseal for
applications with hot particles
277353
3M Optime II Versaflo Headtop Mounted Ear Muff For
3M Versaflo M Series
• Optimum seal ear muffs, with low contact pressure
• Snug comfort – even during long-term use
3M Versaflo M-925 Molten Metal Visor
• For use with any Versaflo M Series headtop
• Box of 5
3M Versaflo M-928 Peel Off Visor Covers
• Box of 10
277349
277359
277354
112

DURAFLOW
SCOTT SAFETY DURAFLOW READY-PAK
EVERYTHING YOU NEED IN ONE PACKAGE
POWERED AIR
RESPIRATOR
For users who do not own an approved Scott Safety headtop, DURAFLOW Ready-Paks are available which include the
same components as a DURAFLOW Starter Pack, which the addition of a Scott Safety headtop, hose and filter. A number of
headtop configurations are available to best suit the application and user.
Duraflow ReadyPaks are approved to EN12941 TH3
Respiratory Protection
CONTAINS
CONTAINS
Scott Safety DURAFLOW FH1 Ready-Pak
• Revolutionary soft head cradle for intuitive and
straightforward donning
• Ultra-clear PETG visor giving wide field of view and a
clear down-view panel
• Half hood design with skin-friendly neoprene chin seal
• Includes FH1 headtop, DURAFLOW, battery, charger,
filters & hose
• CE certified to EN12941 TH3, EN166 1F
Code: 277366
Scott Safety DURAFLOW FH2 Ready-Pak
• Revolutionary soft head cradle for intuitive and
straightforward donning
• Ultra-clear PETG visor giving wide field of view and a
clear down-view panel
• Full hood design with skin-friendly neoprene chin seal
• Includes FH2 headtop, DURAFLOW, battery, charger,
filters & hose
Code: 277367
CONTAINS
CONTAINS
Scott Safety DURAFLOW FH31 Ready-Pak
• Lightweight polyethylene frame with anti-mist coated acetate visor
• Washable and replaceable polyether foam face seal
• Face shield design with broad elastic headband harness
• Includes FH31 headtop, DURAFLOW, battery, charger, filters & hose
• CE certified to EN12941 TH2, EN166 1F
Code: 277370
Scott Safety DURAFLOW FH6 Ready-Pak
• High impact protection
• Integrated helmet & visor with optional ear defenders with bayonet adapter
• Good airflow distribution to minimise wind in the eyes discomfort
• Includes FH6 headtop, DURAFLOW, battery, charger, filters & hose
• CE certified to EN12941 TH2, EN166 1F
Code: 430774
Scott Safety Filters Approved with DURAFLOW
Type & Colour Code Application Code
P3
Solid and liquid particles of toxic agents, radioactive substances and microorganisms,
e.g. bacteria and viruses.
293045
A2
P3
Organic gases and vapours, e.g. solvents with a boiling point above 65ºC, solid and liquid
particles, radioactive and toxic particles and micro-organisms. 293039
A2 B2 E2 K2 P3
Organic, inorganic and acid gases and vapours as well as ammonia and organic ammonia
derivatives, solid and liquid hazardous particles , e.g. radioactive and toxic substances and
micro-organisms.
293091
113

Respiratory Protection
TORNADO
MODULAR RESPIRATORY SYSTEM
The Tornado Powered Air Respiratory System is one
of the most flexible respiratory systems available on
the market today. With a choice of interchangeable
headtops, filters and hoses the modular Tornado system
increases productivity through minimising user fatigue.
SCOTT SAFETY FH1
HALF HOOD HEADTOP
CONFORMS TO EN 12941 TH3, EN166 F
Revolutionary soft head cradle for
intuitive and straightforward donning.
Ultra-clear PETG visor giving
wide field of view and a clear downview
panel. Half hood design with a
skin friendly neoprene chin seal.
Code: 277016
REQUIRED FOR FH1
T-POWER UNIT: 277010
PU STRETCH HOSE: 431549
CHARGER: 277045
BATTERY: 277038
ADAPTORS: 277014
SCOTT SAFETY FH2
FULL HOOD HEADTOP
CONFORMS TO EN12941 TH3, EN166 1F
Revolutionary soft head cradle for
intuitive and straightforward donning.
Ultra-clear PETG visor giving
wide field of view and a clear downview
panel. Full hood design with
skin-friendly neoprene chin seal.
Code: 277017
REQUIRED FOR FH2
T-POWER UNIT: 277010
PU STRETCH HOSE: 431549
CHARGER: 277045
BATTERY: 277038
ADAPTORS: 277014
SCOTT SAFETY
T-POWER UNIT
CONFORMS TO EN 12941/2
At the heart of the Tornado system
is the T-Power powered air
respirator. T-Power is a lightweight
unit which is designed to fit neatly
around the body. With 15 automatic
power levels for optimum airflow,
visual and audible alarms and extended
battery life, T-Power ensures
workers can concentrate on their
work, not their equipment.
Code: 277010
TORNADO SMART CHARGER
TOR/BC/SM
TORNADO BATTERY PACK
TOR/BATT/LITE
TORNADO FILTER ADAPTOR
TOR/ADAPT
TORNADO STRETCH HOSE
TOR/BC/SM
Takes ultimate care of the
battery by reverting to trickle
charge on completion. LED
lights indicate status.
Full charge in 7 hours.
8 hour battery - Ultra lightweight,
smart NiMh. For use
with smart charger only.
Code: 277038
For use where more than 1 filter
is required on the T-Power unit.
Code: 277014
Flexes with the user to ensure
the hose doesn't get snagged,
Code: 431549
Code: 277045
TORNADO T-POWER FILTERS
TYPE & COLOUR CODE APPLICATION CODE
A1 B1 E1 PSL
TF230 - Organic gases and vapours with a boiling point
above 65°C. Inorganic and acid gases and vapours, eg.
chlorine, hydrogen sulphide, hydrogen cyanide, sulphur
dioxide and hydrogen chloride. Plus solid and liquid
particulates (dusts, fibres, mists, fumes, bacteria and virus)
NO. OF
FILTERS
ADAPTOR
REQUIRED?
277023 3 YES
A2 B2 E2 K2 Hg PSL
TF233 - Organic gases and vapours with a boiling point
above 65°C. Inorganic and acid gases and vapours, eg.
chlorine, hydrogen sulphide, hydrogen cyanide, sulphur
dioxide and hydrogen chloride. Ammonia and organic
ammonia derivatives. Plus solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus)
277037 3 YES
PSL PF251/2 - High efficiency particulate filter 292668 1 NO
114

Powered Respiratory System
NEW
Concept Air Helmet
and Flip Up Visor Kit
APPROVED TO EN 12941, EN 14594
HELMET: EN 397, MM, -40°C, LD,
440VA.C./1000VA.C.
VISOR: EN 166 1 B 9 3
Complete starter powered respiratory
kit comes complete in a box.
Lightweight Concept helmet for
complete head and face protection.
180 litres of filtered air per minute.
Li-ion battery, with up to 8 hours
usage before recharge. Kit includes
Headpiece, ConceptAir 2000 PLUS,
Filter, Pre Filters, Battery, Battery
Charger and Headpiece Hose
Manufacturer’s code: R23CHFUVKIT
Code: 282439
Respiratory Protection
NEW
Concept Air Electronic
Welding Helmet Kit
APPROVED TO EN 12941, ADF LENS - EN
379 WELDING SHIELD - EN 175
Complete starter powered respiratory
kit comes complete in a box.
Electronic welding helmet offers the
latest in Auto Darkening Filter (ADF)
technology in a modern lightweight
shell design. The ADF is 1/2/1/1
certified with a large 97 x 47mm
viewing area and grinding mode. 180
litres of filtered air per minute. Li-ion
battery, with up to 8 hours usage
before recharge
Manufacturer’s code:
R23AWH913KIT
Code: 282440
NEW
Concept Air
Flip Up Visor Kit
APPROVED TO EN 12941, EN 14594,
EN 166 1 B 9 3
Complete starter powered respiratory
kit comes complete in a box. With
lightweight flip up polycarbonate
visor - maximising all round vision
and head coverage. 180 litres of
filtered air per minute. Li-ion battery,
with up to 8 hours usage before
recharge
Manufacturer’s code: R23FUVNKIT
Code: 282441
115

Respiratory Protection
Dräger Powered Respiratory System
Dräger X-plore ® 8000 range was created for maximum respiratory and facial protection even under
the most challenging of conditions. Aside from safety, comfort and top performance in numerous
application fields, the X-plore ® 8000 headpieces can be effortlessly combined with other components
from the X-plore ® series.
Dräger X-plore ® 8500 Blower Unit
CONFORMS TO EN 12941 WITH DRAGER X-PLORE 300 HOODS, HELMETS AND VISORS.
EN 12942 WITH DRAGER X-PLORE 4740/6000 HALF & FULL FACE MASK
Robust designed for daily use in tough environments. Self-explanatory operation,
minimise user error. Comfortable and easy to maintain. Intelligent alarm system with
two-step alarm concept. Lithium-ion technology. Filter recognitions with advanced
sensor technology
Code: 431289
Manufacturer’s code: R59500
Standard Belt
Dräger X-plore ® 8000 Standard Belt
Provides secure fitting for the wearer when faced with the most challenging of
environments
Code: 431291
Manufacturer’s code: R59700
Dräger X-plore ® 8000 Storage Box
Provides robust protection for the main X-plore ® unit
Code: 431324
Manufacturer’s code: R59690
Dräger X-plore ® 8000 Carrying Systems, Batteries and Chargers
DRÄGER X-PLORE ® 8000 ACCESSORIES
Product Name Product Description Code
X-plore ® 8000 Decon Belt R59710 - Adjustable between 750mm & 1,400mm 431292
X-plore ® 8000 Comfort Pad R59730 - For prolonged use 431293
X-plore ® 8000 Standard Charger R59580 - Provides rapid charging 431296
X-plore ® 8000 High Capacity Battery R59585 - Provides twice the capacity of a standard battery 431295
X-plore ® 8000 Standard Battery R59565 - Provides at least 4 hours of power 431294
DRÄGER X-PLORE ® 8000 FILTERS
Type & Colour Code Application Code
P R S L
6739535 - Reusable particulate, solid & liquid filter 431297
A2 6739580 - Organic gases and vapours with boiling point >65 °C 431298
K2 6739585 - Ammonia and organic ammonia derivatives 431299
A2
P R S L
6739545 - Organic gases and vapours with boiling point >65 °C 431300
A1 B1 E1 P R S L
6739550 - Organic/inorganic acidic gases and vapours with boiling point >65 °C 431301
A1 B1 E1 K1 Hg PRSL
6739555 - Organic/inorganic acidic gases + ammonia, mercury and vapours with boiling
point >65 °C
431302
116

Dräger Powered Respiratory System
Respiratory Protection
Dräger X-plore ® 8000 Standard
Short Hood
CONFORMS TO EN 12941 TH3 & EN 166 1 F3
Integral part of the new powered air-purifying respirator.
Robust, effective protection. Provides a high degree of
comfort. Compatible with other products.
Size (S/M, L/XL)
Code: 431309 Manufacturer’s code: R59800/10
Dräger X-plore ® 8000 Premium
Short Hood
CONFORMS TO EN 12941 TH3 & EN 166 1 F3
Increase chemical protection. Oil and water repellent.
Premium sweatband. Cleaning and disinfection possible.
Size (S/M, L/XL)
Code: 431311 Manufacturer’s code: R59840/50
Dräger X-plore ® 8000 Standard
Long Hood
CONFORMS TO EN 12941 TH3 & EN 166 1 F3
Integral part of the new powered air-purifying respirator.
Robust, effective protection. Provides a high degree
of comfort. Compatible with other products. Complete
protection for head, face and neck area. Size (S/M, L/XL)
Code: 431313 Manufacturer’s code: R59820/30
Dräger X-plore ® 8000 Premium
Long Hood
CONFORMS TO EN 12941 - TH3 & EN 166 1 F3
Increased chemical protection. Oil and water resistant.
Double seamed ends to avoid fraying. Reusable
material. Panoramic view ensuring an almost natural
field of vision. Complete protection for head, face and
neck area. Size (S/M, L/XL)
Code: 431315 Manufacturer’s code: R59860/70
Dräger X-plore ® 8000 Protective Visor
CONFORMS TO EN 12941 - TH2 EN 166 1 B 93
Protective visor for the most challenging industrial job.
Specially designed air channels leads the air directly
into the breathing area. Prevents unpleasant drafts of air
over the head. Durable and resistant PC visor. 90 degree
hinged visor
Code: 431317
Manufacturer’s code: R59900
Dräger X-plore ® 8000 Helmet
With Visor
CONFORMS TO EN 12941 - TH2 (RESPIRATORY PROTECTION),
EN 397 (HEAD PROTECTION), EN 166 1 B 9 3 (EYE
PROTECTION)
Protective visor for the most challenging industrial job.
Specially designed air channels leads the air directly
into the breathing area. Prevents unpleasant drafts of air
over the head. Durable and resistant PC visor. 90 degree
hinged visor
Colour: White
Code: 431319
Colour: Black
Code: 431318
Manufacturer’s code: R59910
Manufacturer’s code: R58325
DRÄGER X-PLORE ® 8000 HOSES
Product Name Application Code
X-plore ® 8000 Standard Hose (For hoods) R59620 - For hoods 431305
X-plore ® 8000 Flexible Hose (For Hoods) R59600 - For hoods 431306
X-plore ® 8000 Flexible Hose (For tight fitting headpieces) R59610 - For tight fitting head pieces 431304
X-plore ® 8000 Standard Hose (For helmets & visors) R59640 - For helmet & visors 431307
X-plore ® 8000 Fleible Hose (For helmets and visors) R59650 - For helmets & visors 431308
X-plore ® 8000 Standard Hose (For tight fitting headpieces) R59630 - For tight fitting head pieces 431303
117

Respiratory Protection
Escape Hoods
Dräger Parat ® 7500 Combined
Fire & Industrial Escape Hood
Dräger Parat ® 4700 Industrial Escape Hoods
Dräger Parat ® 7500 Fire & Industrial
Escape Hood
CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOODS;
ACCORDING TO DIN 58645-7 FROM FILTERING ESCAPE DEVICES;
FILTER ADDITIONALLY TESTED IN ACCORDANCE WITH EN
14387:2004 FOR GAS FILTERS AND COMBINES FILTER
Protects against toxic gases, vapours, particles and
fire-related gases. Filter: ABEK CO P3. Fastest possible
escape. Robust housing.
Hard case for splash water protection (IP54)
Code: 431333 Manufacturer’s code: R59475
Soft case for dust protection (IP5)
Code: 431334 Manufacturer’s code: R59427
Dräger Parat ® 4720 Escape Hood - Soft
Pack
CONFORMS TO DIN 58647-7 FOR FILTERING ESCAPE DEVICES;
FILTER ADDITIONALLY TESTED IN ACCORDANCE WITH EN
14387:2004 FOR GAS FILTER(S) AND COMBINED FILTER(S).
Industrial escape hood with ABEK P3 filter. Industrial
face hood for sudden use in Industrial gases, vapours
and particles. Fast escape from hazards toxic gases,
vapours and particles. Soft pack provides dust protection
(IP5)
Code: 431335
Manufacturer’s code: R59421
Dräger Parat ® 4730 Escape Hood - Hard
Pack
CONFORMS TO DIN 58647-7 FOR FILTERING ESCAPE DEVICES;
FILTER ADDITIONALLY TESTED IN ACCORDANCE WITH EN
14387:2004 FOR GAS FILTER(S) AND COMBINED FILTER(S)
Industrial escape hood with ABEK P3 filter. Escape
hood In robust hard case (provides dust protection to
IPS). Allow the user to check the expiration date and
the device condition. Hard pack provides splash water
protection (IP54)
Code: 431336
Manufacturer’s code: R59431
Dräger Parat ® 5500 Fire Escape Hoods
Dräger Parat ® 5530 Escape Hood
- Hard Pack
Dräger Parat ® 5510 Escape Hood -
Single Pack
CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOOD,
ADDITIONALLY TESTED FOR THE USE AGAINST H2S (AT
2,500PPM) IN ACCORDANCE WITH DIN 58647-7
Fire escape hood with CO P2 filter. Safe escape from
suddenly occurring toxic fire related gases, vapours and
particles. Compact, easy to handle
Dräger Parat ® 5520 Escape Hood
- Soft Pack
CONFORMS TO EN 403:2004 FOR FIRE ESCAPE HOODS,
ADDITIONALLY TESTED FOR THE USE AGAINST H2S (AT
2,500PPM) IN ACCORDANCE WITH DIN 58647-7
Fire escape hood with CO P2 filter. Safe escape from
suddenly occurring toxic fire related gases, vapours and
particles. Soft pack provides dust protection (IP5)
R59435 - CONFORMS TO EN 403:2004 FOR FIRE ESCAPE
HOODS, ADDITIONALLY TESTED FOR THE USE AGAINST H2S (AT
2,500PPM) IN ACCORDANCE WITH DIN 58647-7
Fire escape hood with CO P2 filter. Safe escape from suddenly
occurring toxic fire related gases, vapours and particles
Code: 431329
Manufacturer’s code: R59435
Dräger Wall holder For Parat ® Hard Pack
Code: 431327
Manufacturer’s code: R59415
Code: 431328
Manufacturer’s code: R59425
Code: 431330
Manufacturer’s code: R59451
118

Escape Hoods
Respiratory Protection
Dräger Parat ® 3100 Half Mask
CONFORMS TO RECOGNIZED STANDARD FOR INDUSTRIAL ESCAPE DEVICES
(DIN 58647-7)
Provides users a minimum of 15 minutes escape time. Half mask escape device
equipped with a multi-gas ABEK15 filter
Code: 431331
Manufacturer’s code: R57981
Dräger Parat ® 3200 Mouth and Nose Clip
CONFORMS TO RECOGNIZED STANDARD FOR INDUSTRIAL ESCAPE DEVICES
(DIN 58647-7)
Filter escape device are designed for 15 minutes of escape time with ABEK filter
robust handy case and robust clip. Safe escape from suddenly occurring toxic fire
related gases, vapours and particles
Code: 431332
Manufacturer’s code: R57982
Face Fit Testing Kits
NEW
Respair Face Fit Test Kit
For tight fitting half masks, disposable and reusable masks.
The face fit test kit has been developed using the structure
as laid down in HSE 282/28 document. Includes face fit
test hood, 2 nebulisers, sensitivity test solution, user
instructions and CD manual
Code: 432402
3M Face Fit Test Kit
Each kit contains a hood and collar assembly, two nebulisers, one bottle of sensitivity solution,
one bottle of fit test solution, detailed user instructions and CD ROM, spare atomiser heads for the nebuliser and a
pin for unblocking nebulisers.
Qualitative RPE Face Fit Test Kit for:
• FFP1, FFP2, FFP3 filtering face pieces
• Half facemask respirators fitted with particulate or combined filters
3M FT10 Face Fit Test Kit (Sweet)
Code: 290128
Manufacturer’s code: FT10
3M FT30 Face Fit Test Kit (Bitter)
Code: 290129
Manufacturer’s code: FT30
3M FT11 Face Fit Test Kit Replacement
Sweet Sensitivity Solution
• Packed in cartons of 6
Code: 290139
Manufacturer’s code: FT11
3M FT32 Face Fit Test Kit Replacement
Bitter Solution
• Packed in cartons of 6
Code: 290138
Manufacturer’s code: FT32
119

Eye & Face Protection
120
Buying Guide
Choosing Safety Eyewear
To help choose safety eyewear best suited to your needs the following information may be useful.
Whilst every effort should be made to remove hazards as the result of a Workplace Risk Assessment,
if safety eyewear is necessary as a last resort, the following section criteria should be considered:
• Type of Hazard
• Type of Protection
• Type of Lens
Anti-mist? Anti-scratch?
Does your eyewear reach the standard?
“K” and “N” are coating treatments that reach the standard set by EN 166. It’s easy how to find out,
you just look for the “K” (anti-scratch) and “N” (anti-mist) on the lens of your safety glasses, goggles
and face shields.
By EN law all safety eyewear needs to be marked on the lens. If the lens doesn’t have ”K” or “N”
marked on, then they do not reach the required standard.
K = Anti-scratch treatment applied to the surface
of the lens whose hardness is a barrier against
superficial damages that can impair vision.
2-3 U 1 FT K N CE
2-3 U 1 FT K N CE
Anti-Mist
Many products in this section feature anti-mist
coatings and are marked with this icon:
Anti-Scratch
High impact but scratch resistant optically
correct material based on polycarbonate with a
quartz crystal coating on the front of the lens.
This lens absorbs UVA and UVB light up to a
wavelength of 400 nanometres. Many products in this section
have anti-scratch properties and are marked with this icon:
N = Anti-mist treatment, which, due to its
chemical and physical abilities, prevents the
formation of condensation by absorbing the
humidity drops.
U – EN166 FT CE
European Standards EN 166
To assist you in your understanding of markings on Eye Protection Products covered by this Standard you should note:
Optical Standard: Frame Lens
Class 1: For continuous work - 1
Class 2: For intermittent work - 2
Class 3: For occasional work, but must not be worn continuously - 3
Mechanical Properties:
Increased Robustness (General Purpose) - S
High Energy Impact (190m/sec) A A
Medium Energy Impact (120m/sec) Grade 1 B B
Low Energy Impact (45m/sec) Grade 2 F F
Increased Robustness – General Purpose Impact-Performance at Extremes of Temperature T T
Areas of Use:
Liquids (chemical) 3 -
Large Dust Particles 4 -
Gas and Fine Dust Particles 5 -
Short Circuit Electric Arc 8 -
Molten Metals and Hot Solids 9 9
Optional:
Resistance to Misting/Fogging - N
Resistance to Mechanical Damage (Anti-Scratch) - K
NB: The “A”, “B”, “F” and “S” markings on frame and lens represent tests carried out on each component and
therefore may be different – in which case the lower level must be assigned to the complete unit when making
an assessment.
EN 169 Welding Filters
EN 170 Ultra-Violet Filters
EN 171 Infra-red Filters
EN 172 Solar Protection Filters for Industrial Use
ANTI-MIST
ANTI-SCRATCH
EN 175 Welding Work Equipment
EN 207 Laser Protection Eyewear
EN 208 Laser Adjustment Eyewear
Health & Safety
Type of Hazard
Hazards fall into 4 main categories:
1. Mechanical – Flying Debris, Dust or Molten Metal
2. Chemical – Fumes, Gases or Liquid Splash
3. Radiation – Heat (Infra-red), Ultraviolet light or Glare
4. Laser Light – Over a wide spectrum of wavelengths from
Ultraviolet to Infra-red
Type of Eye Protection
SAFETY SPECTACLES Comfortable and available in a variety
of styles. Will not keep out Dust, Gas or Molten Metal. We also
offer a complete prescription safety
eyewear service.
SAFETY GOGGLES Provide protection for all types of hazards.
May be worn over spectacles.
SAFETY FACESHIELD Protects the face as well as the eyes
but does not keep out dust or gas. Comfortable to use for long
periods.
Clear lens
General purpose for indoor applications that require
impact protection. Provides 99% protection from harmful
UV-B rays.
Smoke
Protection from sunlight, excessive glare and high levels
of hazardous light, ideal for all outside workers. Full
colour recognition.
Indoor/Outdoor
Reduces sun glare and intense sunlight, mirror coating
reflects glare. Full colour recognition.
Yellow
Ideal for low-light environments, artificially lit areas, dawn
and dusk. Provides high definition visibility and good
contrast in low light.
Platinum
Bollé Safety revolutionized eye protection with an
innovation that exceeds the requirements of all
international standards, especially the En 166 KN option.
It guarantees greater safety, reliability and comfort. This
permanent coating on both slides of the lens gives a
high resistance to scratching, to the most aggressive
chemicals and delays the onset of fogging for well over
2 minutes.
CSP (Comfort Sensory Perception)
Lens coating that provides 100% protection against UVA
& UVB rays and blue light. This innovative coating is an
effective solution for all activities that alternate exposures
to bright light and low light. Suitable for extreme hot
and cold temperature environments. CSP is also a
combination of the platinum double sided anti-scratch
and ant-mist fog coating.
ESP (Extra Sensory Perception)
ESP provides 100% protection against UVA & UVB rays,
filtering filters out 70% of blue light. Transmits over 60%
of visible light.
Twilight
Twilight offers the advantages of ESP but with a double
anti-mist coating on both sides. This prevents fogging in
the most challenging of conditions. Twilight are designed
to be used in low light conditions, it improves contrast.
It’s light transmission rate is perfect for indoors or
outdoor. It filters 76% of blue light.

Eye & Face Protection
Eye & Face Protection
121

Eye & Face Protection
Premium Eye Protection
NEW
ANTI-MIST ANTI-SCRATCH
Smoke
CSP
Blue Flash
Bollé Tryon Safety Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Attractive design wrap-around sporty style. Unique double sided antiscratch
and anti-mist Platinum K and N coating for excellent clarity and
protection(except on flash lens). Greater comfort thanks to its adjustable
non-slip nose. Excellent grip with co-injected PC/TPR temples. Soft and ultra
pliable flex 1600 temples for better wearer comfort. Half frame style offering
a large field of view and better visibility. Lightweight, only 34g.
Colour: Clear lens Code: 292920 Manufacturer’s code: TRYOPSI
Colour: Smoke lens Code: 292921 Manufacturer’s code: TRYOPSF
Colour: CSP lens Code: 292927 Manufacturer’s code: TRYOCSP
Colour: Blue Flash lens Code: 292922
Manufacturer’s code: TRYOFLASH
Bollé Rush+ Safety Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Co-injected, bi colour temples that are cushioning and fit perfectly to the head.
Non-slip bridge. Unique double sided anti-scratch and anti-mist Platinum K and
N coating for excellent clarity and protection
Colour: Clear lens Code: 293026 Manufacturer’s code: RUSHPPSI
Colour: Smoke lens Code: 293027 Manufacturer’s code: RUSHPPSF
Colour: Twilight lens Code: 431357 Manufacturer’s code: RUSHPTWI
Also available with CSP lens
ANTI-MIST
ANTI-SCRATCH
Smoke
Twilight
Bollé Contour Safety Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Incredibly lightweight (21g) with TPE bridge and temples. Market leading levels
of fit, comfort and protection integrated side shields with exceptional field of
view over 180°. Supplied with a free microfibre bag. Unique double sided
anti-scratch and anti-mist Platinum K and N coating for excellent clarity and
protection
Colour: Clear lens Code: 292915 Manufacturer’s code: CONTPSI
Colour: Smoke lens Code: 292916 Manufacturer’s code: CONTPSF
ANTI-MIST
ANTI-SCRATCH
ESP
Colour: ESP lens Code: 292917 Manufacturer’s code: CONTESP
Smoke
Bollé Slam+ Safety Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Ultra modern, ultra lightweight, sports style wrap. Ultra close fitting protection.
Panoramic vision. Co-injected sports temples. Unique double sided anti-scratch
and anti-mist Platinum K and N coating for excellent clarity and protection
Colour: Clear lens Code: 431359 Manufacturer’s code: SLAPPSI
Colour: Smoke lens Code: 431360 Manufacturer’s code: SLAPPSF
Colour: CSP lens Code: 431361 Manufacturer’s code: SLAPCSP
ANTI-MIST
Smoke
ANTI-SCRATCH
CSP
ANTI-MIST
ANTI-SCRATCH
Bollé Silium+ Safety Spectacles K & N Rated
Smoke
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Silium+ combines the styling and success of the Silium with a comfortable and
ultra lightweight polycarbonate frame. Adjustable non-slip bridge. Great all-round
vision. Unique double sided anti-scratch and anti-mist Platinum K and N coating
for excellent clarity and protection. Gun Metal temples. Weight 21g
Colour: Clear lens Code: 292911 Manufacturer’s code: SILPPSI.85
Colour: Smoke lens Code: 292912 Manufacturer’s code: SILPPSF49
CSP
Colour: CSP lens Code: 431287 Manufacturer’s code: SILPCSP.49
122

Premium Eye Protection
Bollé IRI-s Safety Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
B-Flex shape memory bridge. Bridge is height adjustable. Pivoting nonslip
ergonomic temples. Optical class 1 polycarbonate lenses. IRI-s is also
available with corrective reading lenses. Supplied with sports cord. Unique
double sided anti-scratch and anti-mist Platinum K and N coating for
excellent clarity and protection
Colour: Clear lens Code: 293121 Manufacturer’s code: IRIPSI
Colour: Smoke lens Code: 293122 Manufacturer’s code: IRIPSF
Colour: Twlight lens Code: 293123 Manufacturer’s code: IRITWI
Eye & Face Protection
ANTI-MIST
ANTI-SCRATCH
Twilight
Smoke
Colour: Clear. Black/red frame. 1.5 Reading Area +1.5 ASAF IRIDPS
Code: 293124 Manufacturer’s code: IRIDPSII.5
Bollé Rush+ Small Safety Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Suitable for narrower faces. Bi-material, bi-colour temples pink/white or
blue/white. Unique double sided anti-scratch and anti-fog Platinum K and N
coating for excellent clarity and protection. Adjustable non-slip bridge
Colour: Clear lens. Blue/White frame
Code: 431286 Manufacturer’s code: RUSHPSPSI
Colour: Clear lens. Pink/White frame
Code: 431352 Manufacturer’s code: RUSHPSPSIP Each £7.10
ANTI-MIST
ANTI-SCRATCH
Pink/White
Bollé Tracker II Hybrid Safety Spectacle K & N Rated
CONFORMS TO EN 166 EN 170 AND EN 172 1BT 34 KN
Provides the comfort of a spectacle with the fit and seal of a goggle.
Interchangeable foam seal which gives added brow and cheek protection.
Adjustable strap that can also be removed. Straight sports temples. Wraparound
base 8 curve. Fantastic field of view and side ventilation. Prescription
insert available which can be glazed to all prescriptions. Supplied with a
micro fibre pouch. Unique double sided anti-scratch and anti-fog Platinum K
and N coating for excellent clarity and protection
Colour: Clear lens Code: 292934 Manufacturer’s code: TRACPSI
Colour: Smoke lens Code: 430686 Manufacturer’s code: TRACPSF
ANTI-MIST
ANTI-SCRATCH
Smoke
Also available in Yellow
NEW
uvex skyguard NT Safety Spectacles K & N Rated
CONFORMS TO EN166 1F 34 KN CE
Soft sealing frame protects against liquid droplets, splashes and large dust
particles for increased wearer protection. uvex permanent lens coating
technology: anti-fog coating on the inside of the lens, scratch-resistant on
the outside. Lens can be tilted for a customised fit. Close fitting, low profile
dimensions. Less obtrusive allowing for increased flexibility of movement.
Wraparound design for an unhindered field of vision. 100% UV protection
Colour: Clear Code: 293264 Manufacturer’s code: 9175-275
ANTI-MIST
ANTI-SCRATCH
uvex i-3 Safety Spectacles
ANTI-MIST
ANTI-SCRATCH
CONFORMS TO EN 166 1F KN CE
uvex permanent lens coating technology: anti fog coating on the inside and scratchresistant
on the outside. Side arm flex zones allow the spectacles to adapt to any head
width - fitting narrow or wider faces equally well. Soft flex temple ends firmly grip the side
of the head for a secure pressure-free fit. Extremely soft nose bridge pads ensure non-slip,
comfortable fit. Metal free for reduced weight and robustness. 100% UV protection
Colour: Clear lens. Black/Blue frame Code: 256445 Manufacturer’s code: 9190.275
CONFORMS TO EN 166 1F KN CE, EN 172
Colour: Silver Mirror lens Code: 431409 Manufacturer’s code: 9190.885
Clear anti-reflective
Silver Mirror
Colour: Clear lens, anti reflective both sides. Grey/Pale Blue frame
Code: 431408 Manufacturer’s code: 9190.839
123

Eye & Face Protection
Modern Safety Spectacles
NEW
ANTI-MIST ANTI-SCRATCH
Bollé Ulitm8 Clear Lens Safety
Spectacles K & N Rated
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
High resistance product. 2 in 1 product: spectacle
or goggle thanks to temples/goggles conversion kit.
Attractive design wrap-around sporty style.
Excellent for extreme work environments (cold,
heat, dust, damp environments, oil industry, mining
industry, etc.) thanks to its TPR waterproof foam
and its maximum mist resistance withcoating
on both sides of the lens. Excellent grip with
pivoting co-injected PC/TPR temple and removable
adjustable strap. Unique double sided anti-scratch
and anti-mist Platinum K and N coating for
excellent clarity and protection.
Colour: Clear lens
Code: 432306
Manufacturer’s code: ULTIPSI
NEW
Pyramex Neshoba Clear Lens Safety Spectacle
CONFORMS TO CE EN166 F
Frameless design with thin flexible temples. Ultra lightweight, only 16 gm.
Provides 99% protection from harmful UV rays.
Colour: Clear lens Code: 432046 Manufacturer’s code: ES9710S
Colour: Grey lens Code: 432047 Manufacturer’s code: ES9720S
Colour: Indoor/Outdoor Mirror lens Code: 432048 Manufacturer’s code: ES9780S
Grey
Indoor/Outdoor Mirror
Grey
ANTI-MIST
ANTI-SCRATCH
Indoor/outdoor
Amber
Grey
Amber
124
Riley ® Stream Safety Spectacles
CONFORM TO EN166/EN170 AND 172 1FTK&N
Offers a perfect blend of safety, stylish modernity and sporty elegance. High
performance TECTON 400 anti-scratch and anti-mist coating applied to BOTH sides
of the lenses. Single wraparound polycarbonate lens. Soft, adjustable, anti-slip nose
bridge. Co-injected bi-colour thermoplastic rubber temples provide a secure fit. Slim
temples enhance comfort when worn with ear defenders. Supplied with a microfibre
storage pouch. High performance TECTON 400 anti-scratch and anti-mist coatings
applied to BOTH sides of the lens. UV400 protection. Weight 23g. 9.5-Base lens
Colour: Clear lens Code: 014491 Manufacturer’s code: RLY00201
Colour: Grey lens Code: 014493 Manufacturer’s code: RLY00202.10
Colour: Amber lens Code: 430729 Manufacturer’s code: RLY002047.10
Colour: Indoor/outdoor lens Code: 430730 Manufacturer’s code: RLY00203.85
Riley ® Retna Safety Spectacles
Blue
CONFORM TO EN166/EN170 AND 172 1FTK&N
Single wide vision lens gives exceptional field of vision. Flexible sidearms give
unrivalled comfort and grip. Supplied with a microfibre storage pouch.
Extremely lightweight: 21g. 9-Base lens
Colour: Clear lens Code: 014487 Manufacturer’s code: RLY00091
Colour: Grey lens Code: 014488 Manufacturer’s code: RLY00092Each £6.27
Colour: Amber lens Code: 430739 Manufacturer’s code: RLY00093Each £6.27
Colour: Blue lens Code: 014489 Manufacturer’s code: RLY00095Each £6.27

Modern Safety Spectacles
NEW
uvex pheos cx2 Safety Spectacles
CONFORMS TO EN 166 1 FT KN CE
Innovative injection moulding around brow, nose and side arms adapt
to the wearers face for the ultimate fit providing protection and comfort.
Permanent anti-fog coating on the inside of the lens, scratch-resistant
outside. 100% UV protection
Colour: Clear lens Code: 256412 Manufacturer’s code: 9198.257
EN 166 1FT KN CE, EN172
Colour: Grey lens Code: 256413 Manufacturer’s code: 9198.237
Eye & Face Protection
ANTI-MIST
ANTI-SCRATCH
Grey
Grey
uvex sportstyle Safety Spectacles
CONFORMS TO EN 166 1FT KN CE
Close fitting, athletic design. Low weight - just 23g for incredible comfort. Contoured
lens fits all facial shapes. Soft grip side arms, nose bridge and brow for non-slip
comfort. uvex permanent lens coating technology: anti-fog coating on the inside and
scratch-resistant on the outside. 100% UV protection
Colour: Clear lens Code: 431414 Manufacturer’s code: 919.376
ANTI-MIST
CONFORMS TO EN 166 1FT KN CE, EN 172
Colour: Grey Sunglare lens Code: 431415 Manufacturer’s code: 919.277
ANTI-SCRATCH
Amber
Grey Sunglare
Silver Mirror
uvex pheos Safety Spectacles
CONFORMS TO EN 166 1F KN CE
Available in two sizes, the small version is 8mm narrower than the standard version
– ideal for smaller faces. uvex permanent lens coating technology: anti-fog coating
on the inside and scratch-resistant on the outside. Low profile side arms enhances
compatibility with other items of PPE
ANTI-SCRATCH
Colour: Clear lens. Green/Black frame
Code: 256432 Manufacturer’s code: 9192.225 Standard Each £4.95
Code: 431410 Manufacturer’s code: 9192.720 Small Each £4.95
Colour: Amber lens. Yellow/Black frame
Code: 256433 Manufacturer’s code: 9192.385 Standard Each £4.95
Code: 431411 Manufacturer’s code: 9192.788 Small Each £4.95
CONFORMS TO EN 166 1F KN CE, EN 172
Colour: Grey Sunglare lens. Grey/Black frame
Code: 256434 Manufacturer’s code: 9192.285 Standard Each £4.95
Code: 431412 Manufacturer’s code: 9192.786 Small Each £4.95
CONFORMS TO EN 166 1F KN CE, EN 172
Colour: Silver Mirror Lens. Black frame
Code: 256435 Manufacturer’s code: 9192.881 Standard Each £7.50
Code: 431413 Manufacturer’s code: 9192.891 Small Each £7.50
ANTI-MIST
125

Eye & Face Protection
Modern Safety Spectacles
ANTI-MIST
ANTI-SCRATCH
Grey
uvex winner Safety Spectacles
CONFORMS TO EN 166 1F KN CE
Close fitting metal frame spec offering high levels of protection and a wide field
of vision. Anti-fog coating on the inside and scratch-resistant on the outside, plus
antistatic. Sprung side arms gently grip the head for secure pressure-free fit. Hinged
nose pads allow wearers to achieve individual fit. 100% UV protection
Colour: Clear Lens Code: 293263 Manufacturer’s code: 9159.105
CONFORMS TO EN 166 1F KN CE, EN 172
Colour: Grey Sunglare lens Code: 293260 Manufacturer’s code: 9159.118
Bollé Cobra Safety Spectacles
K & N Rated
CONFORMS TO EN 166 AND EN170 AND EN 172 1FT KN
Ultimate wrap around comfort. Co-injected non-slip pivoting sports temples. Non
slip bridge. 180° panoramic field of view. Unique double sided anti-scratch and
anti-fog Platinum K and N coating for excellent clarity and protection. Optical class 1
polycarbonate lens. Supplied with a free sports cord
Colour: Clear lens, Black temples Code: 292953 Manufacturer’s code: COBPSI
Colour: Smoke lens, Black temples Code: 292954 Manufacturer’s code: COBPSF
Colour: Yellow lens, Black temples Code: 292974 Manufacturer’s code: COBPSJ
Colour: Clear lens, Black temples Code: 292975 Manufacturer’s code: COHDPI
CSP also available
ANTI-MIST
ANTI-SCRATCH
Smoke Yellow HD
Bollé Silium Metal Frame
Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Optimal protection and panoramic vision. Anti-scratch and anti-mist. Optical class 1
polycarbonate lens. Integrated side shields. 160° flex sports temples with spring joints.
Soft adjustable non-slip nose pads. Tip Grip system for improved fit
ANTI-MIST
ANTI-SCRATCH
Smoke
Colour: Clear lens, Silver frame Code: 292908 Manufacturer’s code: SILPSI
Colour: Smoke lens, Silver frame Code: 292909 Manufacturer’s code: SILPSF
NEW
Grey
Grey
Blue
Amber
Riley ® Riletto UltraLite Safety Spectacles
CONFORMS TO EN 166 FT 2C-1.2 1FTKN. TECTO N 400 - K&N
Anti-scratch and Anti-fog / UV400 / Moisture repellent. Embossed grip zones
on the temple tips help keep the glasses securely in place. Lightweight (20g).
Ultra slim temples with ‘grip zone’ tips enhance excellent universal fit. Padded
nose bridge. Supplied with a microfibre storage pouch
Colour: Clear lens Code: 432492 Manufacturer’s code: RLY00331
Colour: Grey lens Code: 432493 Manufacturer’s code: RLY00332
Colour: Blue lens Code: 432494 Manufacturer’s code: RLY00333
Riley ® Sesto Safety Spectacles
CONFORM TO EN166/EN170 AND 172 1FTK&N
Sporting sleek lines and a single-piece panoramic lens, SESTO safety glasses
offer excellent optical quality alongside a modern design. Can be worn with ear
defenders. Single panoramic len. Flexible TPE temple ends enhance grip and
comfort. Supplied with a microfibre storage pouch. 10.5-Base lens
Colour: Clear lens Code: 430731 Manufacturer’s code: RLY00121
Colour: Grey lens Code: 430732 Manufacturer’s code: RLY00122
Colour: Amber lens Code: 430733 Manufacturer’s code: RLY00123
126

Modern Safety Spectacles
Twilight
HD
Bollé Rush Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Close fitting base 9 wrap design. Non-slip and adjustable bridge and temples.
Lightweight – 25g. Optical class 1 polycarbonate lenses in a variety of lens options.
Panoramic field of view. Supplied with sports cord
Colour: Clear lens, Clear temples Code: 293022 Manufacturer’s code: RUSHPSI
Colour: Twilight lens, Twilight temples Code: 293024
Colour: Smoke lens, Smoked temples Code: 293023
Manufacturer’s code: RUSHTWI
Manufacturer’s code: RUSHPSF
Colour: HD lens, Clear temples Code: 293009 Manufacturer’s code: RUSHDPI
Eye & Face Protection
Smoke
ANTI-MIST
ANTI-SCRATCH
Bollé Prism Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Sport design. Comfortable straight temples. Anti-scratch/anti-mist lens.
Supplied with sports cord
Colour: Clear lens, Black temples Code: 431284 Manufacturer’s code: PRIPSI
Colour: Smoke, Black temples Code: 431285 Manufacturer’s code: PRIPSF
Smoke
ANTI-MIST
ANTI-SCRATCH
Bollé Viper Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Ultra modern, ultra lightweight, sports style wrap. Close fitting protection. Panoramic vision.
Adjustable temples. Integrated side shields. Anti-scratch/anti-mist lens. Neck cord
Colour: Clear lens, Blue/Black temples Code: 292963 Manufacturer’s code: VIPCI
Colour: Smoke lens, Black temples Code: 292956 Manufacturer’s code: VIPCF
Colour: Yellow lens, Black temples Code: 292973 Manufacturer’s code: VIPPSJ
ANTI-MIST
ANTI-SCRATCH
Smoke
Yellow
uvex i-works Safety Spectacle
CONFORMS TO EN 166 1F KN CE
Sporty robust design. Panoramic lens. Permanent lens coating technology permanent
anti-fog on the inside of the lens, scratch-resistant outside. Soft grip, low profile side
arms with practical hang cord attachment option. Offers high levels of compatibility
with other PPE. Metal free provides reduced weight for high levels of comfort
Colour: Clear/UV 2-1,2, lens. Anthracite/Blue frame
Code: 014475 Manufacturer’s code: 9194.171 Each £6.47
Colour: Clear /UV 2-1,2, lens. Anthracite/Lime frame
Code: 431519 Manufacturer’s code: 9194.175 Each £6.47
Colour: Grey sunglare 23% / UV - 2,5, lens. Antharacite/Grey frame
Code: 014477 Manufacturer’s code: 9194.270 Each £6.47
Colour: Amber/UV - 2-1,2, lens. Black/Yellow frame
Code: 014476 Manufacturer’s code: 9194.365 Each £6.47
Colour: Clear Sunglare filter / UV 5-1,7 silver mirror lens. Antharacite/Grey frame
Code: 431522 Manufacturer’s code: 9194.885 Each £8.40
ANTI-MIST
ANTI-SCRATCH
127

Eye & Face Protection
See page 122 for more information
128

Modern Safety Spectacles
ESP
Smoke
Bollé Contour Metal Frame Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Spring joints. Integral brow bar. Optical class 1 polycarbonate lenses. Integrated side
shields. 160° flex sports temples with spring joints. Exceptional field of view of over 180º.
Non-slip adjustable bridge. Unique double sided anti-scratch and anti-fog Platinum K and
N coating for excellent clarity and protection. Supplied with microfibre pouch
Colour: Clear lens, Gun metal frame Code: 292931 Manufacturer’s code: CONTMPSI
Colour: Smoke lens, Gun metal frame Code: 292933
Manufacturer’s code: CONTMPSF
Colour: ESP lens, Gun metal frame Code: 292932 Manufacturer’s code: CONTMESP
Eye & Face Protection
ANTI-MIST
ANTI-SCRATCH
Bollé Slam High Visibility Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Modern design. Ultra enveloping. Panoramic field of view.
Stylish, easy-to-wear – tailored to night work. High visibility reflective
temples – user seen in dark. Optical class 1. Supplied with a free sports cord
Code: 293021
Manufacturer’s code: SLAHIVI
ANTI-MIST
ANTI-SCRATCH
Smoke
Contrast
Bollé Axis Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Wrap-around protection. Integrated side shields. Panoramic optical class 1 polycarbonate
lens. Unique soft adjustable non slip nose pads. Co-injected Tip Grip pivoting temples for
improved fit and comfort
Colour: Clear lens, Grey temples Code: 292924 Manufacturer’s code: AXPSI
Colour: Smoke lens, Grey temples Code: 430685 Manufacturer’s code: AXPSF
Colour: Contrast lens, Grey temples Code: 292929
Manufacturer’s code: ANCONT
ANTI-MIST
ANTI-SCRATCH
Bollé Slam Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Ultra modern, ultra lightweight, sCorts style wrap. Close fitting protection.
Panoramic vision. Sports temples. Integrated side shields. Neck cord
Colour: Clear ens, Black temples Code: 293018 Manufacturer’s code: SLAPSI
Colour: Smoke lens, Black temples Code: 293020 Manufacturer’s code: SLAPSF
Colour: Yellow lens, Black temples Code: 293017 Manufacturer’s code: SLAPSJ
Colour: ESP lens, Black temples Code: 293019 Manufacturer’s code: SLAPSP
ANTI-MIST
ANTI-SCRATCH
Smoke ESP Yellow
Bollé Mamba Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Lightweight, close fitting wrap with co-injected sports temples, non-slip bridge.
9 dioptre base curve – fantastic field of view. Excellent comfort and fit. Neck cord
Colour: Clear lens, Black/Grey temples
Code: 292919 Manufacturer’s code: MAMPSI
Colour: Yellow lens, Translucent temples
Code: 431524 Manufacturer’s code: MAMPSJ
Colour: Smoke lens, Black/Grey temples
Code: 292907 Manufacturer’s code: MAMPSF
Yellow
Smoke
ANTI-MIST
ANTI-SCRATCH
129

Eye & Face Protection
Modern Safety Spectacles
ESP
Bollé Bandido Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Lightweight. Sports style wrap. Excellent panoramic field of view. Optical class 1
polycarbonate lens. Integrated side shields. Supplied with a sports neck cord
Colour: Clear lens, Clear temples Code: 293503 Manufacturer’s code: BANCI
Colour: ESP lens, Translucent temples Code: 293500 Manufacturer’s code: BANESP
Colour: Smoke lens, Smoked temples Code: 293506 Manufacturer’s code: BANPSF
Colour: Yellow lens Code: 431673 Manufacturer’s code: BANPSJ
Smoke
Yellow
ANTI-MIST
ANTI-SCRATCH
Bollé B-line BL10 Safety Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT
Optical class 1 anti-scratch polycarbonate lens and temples.
Supplied with a free sports cord. Lightweight
Colour: Clear anti-scratch lens Code: 293519 Manufacturer’s code: BL1OCI
Colour: Smoke anti-scratch lens Code: 430684 Manufacturer’s code: BL1OCF
ANTI-MIST
ANTI-SCRATCH
KeepSAFE Phantom Safety Spectacles
CONFORMS TO EN 166 1.F
One piece, frameless polycarbonate lens. Lightweight. Anti-scratch.
Comfortable nose bridge. Adjustable side arms
Colour: Clear, Black frame Code: 293150
ANTI-SCRATCH
KeepSAFE Jaguar Safety Spectacles
CONFORMS TO EN 166 1.F
Modern, lightweight style. Scratch-resistant polycarbonate lens
Colour: Clear lens, Translucent sidearms Code: 293221
Colour: Smoke lens, Black translucent sidearms Code: 292980
Colour: Yellow lens, Yellow translucent sidearms Code: 293224
ANTI-MIST
ANTI-SCRATCH
Smoke
Yellow
130
Riley ® Fresna Safety Spectacles
EN166/EN170 AND EN172 1FT AS/AF
Manufactured from a robust polycarbonate frame. Contains no metal parts and so help
protect eyes from electric arcs. Can be worn with ear defenders. Wide angle vision.
Close fitting lateral protection. 8-Base lens
Colour: Clear lens Code: 014486 Manufacturer’s code: RLY00071 Each £2.95
Colour: Grey lens Code: 430742 Manufacturer’s code: RLY00072 Each £2.95

Eye & Face Protection
See page 124 for more information
131

Eye & Face Protection
Modern Safety Spectacles
Pyramex Intruder Safety Spectacle
CONFORMS TO CE EN166 F
Lightweight, frameless protection. Coated lens provides excellent
side protection and 99.9% protection against harmful UV rays.
Colour: Clear lens Code: 431997 Manufacturer’s code: ES4110S
Colour: Grey lens Code: 431998 Manufacturer’s code: ES4120S
NEW
KeepSAFE Spitfire 2 Safety Spectacles
CONFORMS TO EN 166 1.F AND EN 170
Anti-scratch and protection against UV400 lens. Extremely light and encircling. Elastic
structure, extremely flexible and resistant. New temple for a better ergonomic fit. Soft
adjustable nose pad. Neck cord included in the packaging
Colour: Clear anti-scratch lens Code: 293166
CONFORMS TO EN 166 1.F AND EN 172
Colour: Smoked anti-scratch lens Code: 293167
ANTI-SCRATCH
Pyramex TruLock Multi Colours Box of 12 Safety Spectacles
CONFORMS TO CE EN166 F
Clear lens multi pack of 12. Lightweight only 21 gm. Dielectric, metal-free structure with nylon temples. Scratch-resistant, polycarbonate lens
provides 99% UVA/B/C protection.Comes in six assorted temple colours, ideal where work areas where colour coding is necessary
Code: 432049 Each £2.95
NEW
NEW
132
Riley ® Kosma
Safety Spectacles
CONFORMS TO 1 2C-1.2 1FT
Slim wraparound style. Soft TPE nosepiece for enhanced comfort and fit.
Flexible temple tips. 100% metal free. Weight 26g. 9-Base lens
Colour: Clear lens Code: 432490 Manufacturer’s code: RLY00321
Colour: Grey lens Code: 432491 Manufacturer’s code: RLY00322
Riley ® Fabri Safety Spectacles
EN166/EN170 AND EN172 1FT AS/AF
Single-piece frameless design with self-adjusting TEMPFLEX temple tips. Exceptional
value in a lightweight frame. Single wraparound polycarbonate lens. Universal nose
bridge. Flexible temple tips. UV400 protection. Weight 22g. 9.75-Base lens
Colour: Clear lens Code: 430740 Manufacturer’s code: RLY00191
Colour: Grey lens Code: 430741 Manufacturer’s code: RLY00192

Traditional & Over Spectacles
Bollé Tryon OTG Safety Over Spectacles
CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN
Attractive design wrap-around sporty style. Unique double sided anti-scratch and
anti-fog Platinum K and N coating for excellent clarity and protection(except on
flash lens). Excellent grip with co-injected PC/TPR temples. Soft and ultra pliable
flex 1600 temples for better wearer comfort. Half frame style offering a large field
of view and better visibility. Lightweight, only 40g.
Colour: Clear lens Code: 432307 Manufacturer’s code: TRYOTGPSI
Colour: Smoke lens Code: 432308 Manufacturer’s code: TRYOTGPSF
ANTI-MIST
ANTI-SCRATCH
NEW
Eye & Face Protection
Bollé Overlight
CONFORMS TO EN 166 AND EN 170 1FT
OTG (over the glasses). Fits over all standard prescription frames.
Compact and lightweight. Pivoting temples. Optical class 1 polycarbonate lens.
Anti-scratch and anti-mist
Colour: Clear lens. Clear wrap-around frame Code: 292925 Manufacturer’s code: OVLITPSI Each £4.80
ANTI-MIST
ANTI-SCRATCH
KeepSAFE Lightning Safety Spectacles
CONFORMS TO EN 166 1.F
Wide vision, lightweight wrap-around. Scratch-resistant polycarbonate lens.
Built-in browguard adjustable sidearms
ANTI-SCRATCH
Colour: Clear lens, Blue frame Code: 293158 Each £3.85
KeepSAFE Concorde Safety Spectacles
CONFORMS TO EN 166 1.F
Ultra lightweight, with adjustable length sidearms.
Polycarbonate single lens construction. Built-in browguard
ANTI-SCRATCH
Colour: Clear lens, Blue sidearms Code: 293146 Each £2.52
KeepSAFE Hurricane Safety Spectacles
CONFORMS TO EN 166.1.FT
Economical single polycarbonate wrap-around lens. Moulded browguard.
Vented side shields
Colour: Clear lens, Clear frame Code: 293144 Each £1.86
uvex super OTG Safety Over Spectacles
CONFORMS TO EN 166 1F KN CE
Unique frame design that fits comfortably over most prescription spectacles. uvex
permanent lens coating technology: anti-fog coating on the inside of the lens, scratch
resistant on the outside, anti-mist inside. Side arms graduate from hard to soft material
for flexible, low pressure fit. Hi-resolution lens for improved optical clarity, especially when
wearing two pairs of specs. Metal free. 100% UV protection
Colour: Clear Polycarbonate Lens, Blue frame
Code: 293280 Manufacturer’s code: 9169.260 ANTI-MIST Each £8.70
ANTI-SCRATCH
ANTI-MIST
ANTI-SCRATCH
KeepSAFE 5X7 Safety Over Spectacles
CONFORMS TO EN 166 KN
The ultimate overspec to prescription spectacles. SoftPad technology.
Adjustment of temples in length. Wide range of filters
Colour: Clear lens Code: 293201 Each £10.80
KeepSAFE Hunter Safety Visitor Over Spectacles
CONFORMS TO EN 166 1.FT
Deep box style front profile – for wearing over all sizes of prescription eyewear.
Polycarbonate lens. Fully vented sideshields. Ideal as visitors safety spectacles
Colour: Clear lens, Clear frame Code: 293157 Each £3.07
133

Eye & Face Protection
Goggles With Attachable Visors
ANTI-MIST
ANTI-SCRATCH
Bollé Atom Safety Goggle K & N Rated
CONFORMS TO EN 166 AND EN 170 1BT 3,4,5 KN
Compact, lightweight and ultra comfortable. TPR flexible frame. Wide field of view. Wide
adjustable strap adds to the comfort. Fits over prescription spectacles. Prescription insert
is also available. Tear off lens protectors. Sealed version (Ventilated version available).
Unique double sided anti-scratch and anti-fog Platinum K and N coating for excellent
clarity and protection
Colour: Clear lens, blue frame
Code: 293002 Manufacturer’s code: ATOEPSI
Visor to fit Bollé Atom goggles
Optional face visor is fitted the Atom doubles up as a face shield
Code: 293004 Manufacturer’s code: ATOV Each £6.44
ANTI-MIST
ANTI-SCRATCH
Bollé Blast Safety Goggle
CONFORMS TO EN 166 AND EN 170 1BT 3,9
Unique shape of the goggle ensures a perfect fit with all respirators and with the face
providing maximum comfort and protection. Fits over prescription spectacles. Fitted with
a wide pivoting adjustable headband. Optical class 1 polycarbonate lens. Anti-scratch and
anti-mist. Overflow chute for liquids. Provides protection against impact, chemicals, dust,
gas and molten metal. Available in vented, sealed and foam versions
Colour: Clear lens, Blue frame Code: 292999 Manufacturer’s code: BLAPSI
Bollé Blast Visor (For Use With Bollé Blast Goggle)
CONFORMS TO EN 166 B
Fits to all versions of the Blast goggle. When combined serves the same purpose as a
visor but provides even more protection for the wearer’s eyes
Code: 293000 Manufacturer’s code: BLV Each £6.57
ANTI-MIST
ANTI-SCRATCH
uvex ultravision goggle
CONFORMS TO EN 166 1B 349 KN CE
Panoramic field of vision. uvex permanent lens coating technology: anti-mist, scratch
resistant, anti-static and 100% UV protection on both sides of the lens. Wide fully
adjustable head strap fits all sized heads providing a secure pressure free fit. Can be worn
comfortably over most prescription spectacles. 100% UV protection
Colour: Clear lens. GOGGLE ONLY Code: 256424 Manufacturer’s code: 9301.105
uvex ultravision visor
Offers general protection, such as over-spray. Will fit over disposable respirators. The uvex
ultravision goggle completely seals the eyes from debris while the polycarbonate lower
face shield attaches onto the goggle providing increased facial protection
Colour: Clear, VISOR ONLY Code: 430611 Manufacturer’s code: 9301.317
KeepSAFE 6X3 Vented Safety Goggle
CONFORMS TO EN 166 KN 3,4,9
Panoramic lens can be perfectly worn over prescription glasses. Exclusive UDC
coating. Facial support compatible with half masks. Indirect ventilation system ensures
certified protection against drops andsplashes. Category III PPE. Impact resistance at
432 km/h, even at extreme temperatures. Protects against liquid droplets, Dust, Gas
and Molten Metals
Colour: Clear Code: 256100
KeepSAFE Visor to suit 6X3 Goggle Code: 256101
ANTI-MIST
ANTI-SCRATCH
134

Hybrid Goggles/Spectacles
ANTI-MIST
ANTI-SCRATCH
Bollé Cobra TPR Goggle K & N Rated
CONFORMS TO EN 166 AND EN 170 1BT 3,4,5 KN
Ultra low profile goggle. 1 neoprene strap and TPR seal. Easy sterilized, non-absorbent
material. Non-slip bridge. 180° panoramic field of view. Optical Class 1 polycarbonate.
Supplied with a free mirco fibre pouch. Unique double sided anti-scratch and anti-fog
Platinum K and N coating for excellent clarity and protection
Colour: Clear lens Code: 431288 Manufacturer’s code: COBTPRPSI
Eye & Face Protection
Bollé Cobra Hybrid Safety Spectacle
K & N Rated
CONFORMS TO EN 166 AND EN 170 1FT KN
Ultra-purpose all rounder. A unique concept that offers the comfort of a safety
spectacle with the fit and seal of a goggle. Adaptability of a fully adjustable and
interchangeable strap and temples. Co-injected non-slip pivoting sports temples.
Non slip bridge. 180° panoramic field of view. Unique double sided anti-scratch and
anti-fog Platinum K and N coating for excellent clarity and protectionOptical class 1
polycarbonate lens. Supplied with a free micro fiber pouch
Colour: Clear lens Code: 292971 Manufacturer’s code: COBFTPSI
ANTI-MIST
ANTI-SCRATCH
Bollé Cobra Hybrid Safety Goggle
With A Strap K & N Rated
CONFORMS TO EN 166 AND EN 170 1BT 3 KN
Ultra low-profile goggle. 180º panoramic field of view.
Eyeshield with fit and seal of a goggle. Soft foam seal, wide adjustable strap.
Non-slip bridge. Microfibre pouch
Colour: Clear lens Code: 292972 Manufacturer’s code: COBFSPSI
ANTI-MIST
ANTI-SCRATCH
Riley ® Quadro Safety Spectacles
CONFORM TO EN166/EN170 AND 172 1FTK&N
Offers high level comfort and wide angle vision in a versatile frame. The side arms
can easily be removed and replaced with the head strap to provide an enhanced fit
in challenging conditions. Single piece panoramic lens. Soft comfort TPE inserts on
temple ends. Washable, soft TPE/foam inner frame seal provides a close, comfortable
facial fit. Side-arms can be removed and easily replaced by the enclosed head strap.
Supplied with a microfibre storage pouch. 8-Base lens
Colour: Clear lens Code: 430743 Manufacturer’s code: RLY00311
Colour: Grey lens Code: 430744 Manufacturer’s code: RLY00312
ANTI-MIST
ANTI-SCRATCH
KeepSAFE 6X1 Hybrid Safety Goggle
CONFORMS TO EN 166 KN 3.4
Perfect hybrid goggle combines the comfort and lightness of an eyewear with the
advantages of a traditional goggle. The adjustable temples with SoftPad are
interchangeable with the elastic band, offering complete versatility; the special design of
the rubber leaning on the face ensures a protection certified in accordance with points 3
and 4 of EN 166 standard.. Wide lens for a field of view without distortion. Sophisticated
indirect ventilation system. Soft internal rubber for comfort without local pressure. Certified
according to EN166 point 3 (droplets and splashes) and point 4 (large dust particles)
Colour: Clear lens Code: 256104 Each £15.99
135

Eye & Face Protection
Faceshields
Bollé Sphere Faceshield
CONFORMS TO EN 166 AND EN 170 1AT 3,8,9
Lightweight, flip-up face shield. Easy to replace polycarbonate optical class 1 visor.
Excellent 180° vision. Zytel headgear (made from a mix of fibreglass, nylon and PVC).
Fully adjustable head harness and browguard offering durability flexibility to fit all head
shapes and sizes. Spare visor available. Universal safety helmet attachment available
Code: 293011
Manufacturer’s code: SPHERPI
Bollé Sphere Spare Polycarbonate Visor
CONFORMS TO EN 166 AND EN 170 1AT 3,8,9
Colour: Clear Code: 293012 Manufacturer’s code: FASPHERPIE£8.79
Bolle BL20 flip-up Face Shield BL20PI
CONFORMS TO EN 166 1B
At only 254 grammes this is lightweight and impact resistant.
Face shield - polycarbonate flip-up. Dimensions face shield - 220mm x 390mm.
Blue brow guard that protects the front of the head. Polycarbonate lens to
protect against impacts. With three adjustable ratchets making - comfortable and
outstanding value
Code: 431671
Manufacturer’s code: BL20PI
Bollé BL20 Helmet Adaptor For Faceshield
CONFORMS TO EN 1731
Easy to replace optical class polycarbonate visor. Universal safety helmet
attachment also available. Colour: Clear
Code: 431526
Manufacturer’s code: BL20HA
Bollé BL20 Replacement Clear Polycarbonate Visor
CONFORMS TO EN 166 1B
Colour: Clear
Code: 293015
Manufacturer’s code: BL20FAPI
Honeywell SB600 Supervizor Browguard
CONFORMS TO EN 166 B 3.9
Polycarbonate browguard with ratchet headband. Full wrap-around visor. Colour: Grey
Code: 254666 Manufacturer’s code: 1002297
Honeywell SV9PC Supervizor Polycarbonate Visor
(Not illustrated)
CONFORMS TO EN 166 1-B 3.9
230mm clear polycarbonate visor
Code: 254596 Manufacturer’s code: 1002312 Each £10.45
136
Honeywell SV9AC Supervizor Acetate Visor
CONFORMS TO EN 166 1-F.3
200mm clear acetate visor
Code: 254591 Manufacturer’s code: 1002307 Each £9.35

Faceshields
KeepSAFE Modular Faceshield Unit
CONFORMS TO EN 166 1-B.3.9
Rigid polypropylene. Ratchet head harness. Browguard only
Colour: Blue Code: 290401 Each £9.74
KeepSAFE Acetate Visor
CONFORMS TO EN 166 1-F.3
Low energy impact. Size: 20cm (8") bound
Code: 254262 Each £13.13
Eye & Face Protection
KeepSAFE Polycarbonate Visor
CONFORMS TO EN 166 1-B.3.9
Medium energy impact. Size: 20cm (8") bound
Code: 254261 Each £7.73
KeepSAFE Essential Faceshield
CONFORMS TO EN 166.1.B.3.9
Browguard. Elasticated headband. Unbound 20cm (8") clear polycarbonate visor
Code: 290430 Each £11.42
KeepSAFE Spare Faceshield Visor
CONFORMS TO EN 166.1.B.3.9
Size: 20cm (8") polycarbonate visor
(Not illustrated)
Code: 290431 Each £5.82
Honeywell CV84A Clearways Acetate Visor
CONFORMS TO EN 166 1-F.3
200mm clear acetate visor
Code: 431874 Manufacturer’s code: 1002360
Honeywell CB14 Clearways Browguard
CONFORMS TO EN 166 B 3
Browguard. Elasticated headband
Colour: Grey Code: 431875 Manufacturer’s code: 1002346
Honeywell CV83P Clearways Polycarbonate Visor
(Not illustrated)
CONFORMS TO EN 166 1-B 3
200mm clear polycarbonate visor
Code: 431873 Manufacturer’s code: 1002353
KeepSAFE M510 Chinguard Facesaver
with Polycarbonate Visor
CONFORMS TO EN 166 1-B.3.9
For protection against Liquid Splash and Molten Metal. Use when grinding, fettling and
sandblasting. Polycarbonate browguard and chinguard 20cm (8") polycarbonate visor
Code: 431502 Each £28.62
Replacement visor for M510
Size: 20cm (8") polycarbonate visor
Code: 431503 Each £8.56
137

Eye & Face Protection
Welding Protection
Bollé Fusion+ Electronic Welding Helmet With Electro-Optical Filter
CONFORMS TO EN 166, EN 175 AND EN 379
Lightweight weighing only 525 grams. Filter measures 100 x 49 mm for extra large field of vision.
Sensitivity and off-delay adjustments allow personalised set-up. Variable tint between shades 6 – 8 and 9 – 13.
Can provide clear view for grinding. Permanent DIN 16, UV and IR protection
Code: 256302
Manufacturer’s code: FUSV
Bollé Volt Electronic Welding Helmet
With Electro-Optical Filter
CONFORMS TO EN 166, EN 175 AND EN 379
Suitable for welding MIG / MAG, TIG and Grinding. Available with variable auto-darkening shade filter and a
comfortable 5 position headband. Variable shades 4/9-13. Grinding function. Reaction time: 0.10 MS. 2 Sensors
Code: 256303
Manufacturer’s code: VOLTV
Bollé Safety Slam Shade 2/3/5 Gas Welding Safety Spectacle
CONFORMS TO EN166/169
Wrap around fit. Polycarbonate anti-scratch lens. Lightweight, only 23g. Flexible
sports temples. Supplied with a sports cord
Shade 2
Code: 431657
Manufacturer’s code: SLAWPCC2
Shade 3
Code: 431957
Manufacturer’s code: SLAWPCC3
Shade 5
Code: 431958
Manufacturer’s code: SLAWPCC5
Bollé Safety Tracker Shade 2/3/5 Gas Welding Goggle
CONFORMS TO EN166/169
Close fitting low profile goggle. Polycarbonate anti-scratch lens. Removable
adjustable strap. Removable foam seal. Supplied with a microfibre pouch
Shade 2
Code: 431959
Manufacturer’s code: TRACWPCC2
Shade 3
Code: 431960
Manufacturer’s code: TRACWPCC3
Shade 5
Code: 431961
Manufacturer’s code: TRACWPCC5
Bollé Safety Pilot Shade 5 Gas Welding Goggle
CONFORMS TO EN166/169
Excellent all round vision. Fits over prescription specs. Wide adjustable pivoting
strap. Compatible with a half mask. Anti-scratch polycarbonate lens
Code: 293003
Manufacturer’s code: BLAWPCC5
138

Vented Goggles
Bollé Pilot Vented Safety Goggle K & N Rated
CONFORMS TO EN 166 AND EN 170 1BT 3,4 KN
Ultra flexible co-injected TPR housing for increased comfort. Wide fully adjustable
strap guarantees the wearer optimum levels of fit and comfort. Toric optical class 1
polycarbonate lens. Excellent field of view. Fits over prescription spectacles.
Also available in Smoke and CSP
Code: 292923 Manufacturer’s code: PILOPSI Each £11.77
Smoke
CSP
Eye & Face Protection
ANTI-MIST
ANTI-SCRATCH
Smoke
CSP
Bollé Baxter Vented Safety Goggle K & N Rated
CONFORMS TO EN 166 AND EN 170 1BT 3,4,5 KN
Provides the comfort of a safety spectacle with the fit and seal of a goggle.
Interchangeable foam seal which gives added brow and cheek protection. Fully
adjustable strap that can also be removed. Straight sports temples. Optical class 1
polycarbonate lens. Unique double sided anti-scratch and anti-mist Platinum K and
N coating for excellent clarity and protection. Wrap around base 8 curve. Fantastic
field of view and side ventilation. Also available in Smoke and CSP
Code: 431544
Manufacturers’s code: BAXPSI
Bollé Coverall II Vented Safety Goggle
CONFORMS TO EN 166 AND EN 170 1BT 3,4
Polycarbonate, vented. Sealed PVC frame. Protection against impact, chemicals,
large and fine dust particles. Anti-scratch and anti-fog. Optical class 1 polycarbonate lens.
Fits over prescription spectacles
Code: 431545 Manufacturers’s code: COVARSI Each £5.46
ANTI-MIST
ANTI-SCRATCH
ANTI-MIST
ANTI-SCRATCH
Bollé X90 Low Profile Indirect Vented Safety Goggle
CONFORMS TO EN 166 1BT
Small, ultra compact goggle. All enveloping flexible PVC frame.
Panoramic field of view. Indirect ventilation. Optical Class 1 polycarbonate.
Wide strap enhances the comfort and fit
Colour: Clear lens, clear frame Code: 292926 Manufacturers’s code: X90PSI
Bollé Atom Safety Goggle K & N Rated
CONFORMS TO EN 166 AND EN 170 1BT 3 KN
Compact, lightweight and ultra comfortable. TPR flexible frame. Wide field of view.
Wide adjustable strap adds to the comfort. Fits over prescription spectacles. Prescription
insert is also available. Tear off lens protectors. Ventilated version (Sealed version available)
Colour: Clear lens, blue frame Code: 293001 Manufacturer’s code: ATOAPSI
ANTI-MIST
ANTI-SCRATCH
KeepSAFE Impact Direct Vent Safety Goggle
CONFORMS TO EN 166 1-B
Colour: Clear lens Code: 256175
ANTI-MIST
ANTI-SCRATCH
Colour: Clear Anti-Mist lens lens Code: 256115
139

Eye & Face Protection
Non-vented Goggles
Bollé Attack Safety Goggle
CONFORMS TO EN 166 AND EN 170 1BT 3,4,5,9
Patented design. Unique “comfort zone” cushions the frame of the goggle against the
face providing maximum comfort and protection. Fits over prescription spectacles.
Fitted with a wide adjustable headband. Optical Class 1 polycarbonate lens. Provides
protection against impact, chemicals, dust and molten metal
ANTI-MIST
Colour: Clear lens, crystal frame Code: 293247 Manufacturer’s code: ATPSI
ANTI-SCRATCH
uvex ultrasonic goggle
CONFORMS TO EN 166 1B 349 KN CE
Based on a ski goggle design: extremely lightweight and excellent field of
vision. uvex permanent lens coating technology: anti-fog coating on the inside
and scratch-resistant on the outside. Innovative frame combines hard and soft
components which mould to all facial shapes and protects against droplets, splash
and dust particles. Also aids compatibility with other PPE. Wide fully adjustable
head strap - secure pressure-free fit. Can be worn over most prescription
spectacles. 100% UV protection. Optical class 1 – for the best optical quality
Colour: Clear lens. Orange/Grey frame
Code: 256426 Manufacturer’s code: 9302.245
CONFORMS TO EN 166 1B 349KN CE, EN 172
Colour: Brown Sunglare lens
Code: 431416 Manufacturer’s code: 9302.247
ANTI-MIST
ANTI-SCRATCH
Bolle Coverall Goggle
CONFORMS TO EN 166 AND EN 170 1BT 3,4,5 KN
Sealed PVC frame. Protection against impact, chemicals, large and fine dust particles.
Unique double sided anti-scratch and anti-mist Platinum K and N coating for excellent
clarity and protection. Optical class 1 polycarbonate lens. Adjustable nylon strap. Fits
over prescription spectacles. Cost effective and functional
Colour: Clear lens Code: 431672 Manufacturer’s code: COVERSI
ANTI-MIST
ANTI-SCRATCH
Bolle Blast Goggle
CONFORMS TO EN 166 AND EN 170 1BT 3,4,5,9
Unique shape of the goggle ensures a perfect fit with all small respirators.
Fits over prescription spectacles. Fitted with a wide pivoting adjustable headband.
Optical class 1 polycarbonate lens. Double sided anti-scratch and anti-mist lens.
Overflow chute for liquids.Provides protection against impact, chemicals, dust,
gas and molten metal. Sealed version (Ventilated version available)
140
Code: 431699
Manufacturer’s code: BLEPSI
ANTI-MIST
ANTI-SCRATCH

Eye & Face Protection
141

Eye & Face Protection
Safety Eyewear Accessories
Current PPE directives state that employers who issue employees with PPE must also
provide facilities for effective maintenance and storage of the equipment.
uvex lens cleaning station
Helps prolong product life and increase safety.
Complete station includes: 4 boxes - non abrasive
lens cleaning tissues, 1 x 16oz bottle of cleaning
fluid, Mirror. Fixtures for wall mounting
Dimensions: 340mm(W) 480mm(L) 165mm(H)
Manufacturer’s code: 9990-000
Code: 293464
uvex replacement cleaning solution
Content - 16fl oz
Manufacturer’s code: 9972-101
Code: 293457
uvex replacement cleaning tissues
Approx. 450 sheets
Manufacturer’s code: 999-000
Code: 293465
uvex cleaning towelettes
100 moist silicone-free cleaning tissues. Individually
wrapped – ideal for cleaning eyewear on the go
Manufacturer’s code: 9963-000
Code: 293456 Each £11.95
uvex neck hanging cord
Offers ease of use especially for those that may pass
through areas of mandatory eyewear. Universal fitting
Manufacturer’s code: 9959-002
Code: 431417 Each £2.00
uvex polyester spectacle bag
Protects specs when not in use
Manufacturer’s code: 9954-550
Code: 431418 Each £1.49
142
uvex polyester goggle bag
Ideal for storing goggles when not in use
Manufacturer’s code: 9955-550
Code: 293459 Each £1.90
uvex zipper spectacle pouch
Robust spectacle case with reinforced zipper
and Velcro belt loops. Additional space for spare lenses
Manufacturer’s code: 9954-500
Code: 015448 Each £4.40
uvex zipper goggle pouch
Large and very robust goggle case with zipper and belt
loop. Additional space for spare lens
Manufacturer’s code: 9954-501
Code: 431419 Each £10.30

Safety Eyewear Accessories
Eye & Face Protection
Bollé Lens Cleaning
Station
Lockable metal, wall mounted (or
can be free standing) Comes with
500ml anti-static lens cleaner and 2
boxes of tissues. Replacement lens
cleaners and tissues also available.
Cleans all types of lenses
Bollé Lens Cleaning
Station Tissues
Box with 200 micro tissues.
Fits B600 lens cleaning station
Bollé Lens Cleaning
Station Solution
500ml bottle.
Fits B600 lens cleaning station
Bollé B100 Lens
Cleaning Wipes
100 individually wrapped lens
cleaning wipes
Manufacturer’s code: B100
Code: 293034
Manufacturer’s code: B600
Code: 292990
Manufacturer’s code: B401
Code: 292991
Manufacturer’s code: B402
Code: 292992
Bollé Spectacle Fit Case
with Belt Loop
Large black flexible polyester fit case
with belt loop
Bollé Snap-shut
Spectacle Case
Clic-clac black polyester pouch
Bollé Microfibre Bag
For Spectacles
Black mircofibre bag for all type
of spectacles
Bollé B500 Lens
Cleaning Wipes
Wall mountable lens cleaning
wipe dispenser. 500 individually
wrapped lens cleaning wipes
Manufacturer’s code: B500
Code: 292814
Manufacturer’s code: ETUIC
Code: 431525 Each £3.87
Manufacturer’s code: ETUIS
Code: 292994 Each £1.86
Manufacturer’s code: ETUIFS
Code: 292993 Each £1.43
Bollé Mirco Fibre Bag
For Goggles
Black mircofibre bag for all types
of goggles
Bollé Spectacle Case
with Belt Clip and Loop
Black polyester case with belt
clip and loop
Bollé Semi-rigid Fit Spectacle
Case
with Belt Loop
Large black semi-rigid polyester
fit case with belt loop
Bollé B200 Lens Cleaning Kit
Anti-mist, anti-static lens cleaning
microfibre cloth for all types of lenses.
Single application lasts at least
48 hours.
Packed in cartons of 10
Manufacturer’s code: ETUIFL
Code: 292889 Each £2.33
Manufacturer’s code: ETUIB
Code: 292998 Each £3.39
Manufacturer’s code: ETUICR
Code: 292996 Each £4.24
Manufacturer’s code: B200
Code: 292815 Each £8.30
143

Head Protection
Buying Guide
European Standards
EN 397 specifies physical and performance requirements of industrial safety helmets. Certain
tests are mandatory if the product is to receive EN 397 approval.
These cover:
• Shock absorption
• Resistance to penetration
• Flame resistance
• Chinstrap anchorage
A manufacturer can choose to submit his products to additional optional tests. Such tests
could lead to one or more of these markings appearing on a helmet.
-20°/-30°C The helmet will provide some protection when worn in an environment at or
above this temperature. -40°C ultra low temperature (outside of EN 397)
440V a.c. The helmet will protect against short-term, accidental contact with live electrical
conductors up to this voltage
LD The helmet will provide some resistance to lateral compressive (non-impact) loads
MM Molten Metal splash test
EN 14052 Builds on EN 397 to include more onerous tests and requirements, but also to
include requirements for additional impact protection to the front, rear and sides of the head.
It also includes performance tests for the retention system (typically headband and chin
strap), not typically included in EN 397.
EN 50365 Electrically insulating helmets for use on low voltage installations
EN 812 Is the standard for Industrial Bump Caps, which are intended to provide protection
against bumps caused by walking into hazardous projections. A Bump Cap does not provide
protection against falling or thrown objects and should not be used where a safety helmet is
required
EN 12492 Helmet for Mountaineers
Centurion Corporate Badging Service
At Centurion, we aim to make the complex simple. Our four-step corporate badging process
makes branding safety helmets easy. We are proud that we can despatch orders of under 500
units within 10 working days of their inception. Please ask for more details.
Health & Safety
Identifying Hazards
A safety helmet is required in almost every industry
where there is a risk of being injured by falling
objects. In areas of restricted head space where
accidental bumping of the head could be involved
(e.g. Overhead piping) a scalp protector (bump
cap) should be considered. Bump caps are not a
substitute for safety helmets and must not be used
to protect the head from falling objects.
Identifying Materials
Shells are primarily made using UV stabilised high
density polyethylene (HDPE) or ABS (Acrylonitrile
Butadiene Styrene). Harnesses are made using low
density polyethylene or textile webbing.
Care And Maintenance
A helmet may be cleaned with soap and water,
drying with a soft cloth. A helmet should not be
cleaned with abrasive substances or solvents and
must not be stored in direct sunlight or in contact
with chemicals.
The wearer should inspect their helmet regularly.
Any helmet showing more than superficial abrasions
or scuffing to the shell should be replaced.
Shelf Life
To comply with European Standards, all helmets
are marked with the quarter or month and year
of manufacture. If helmets are stored in boxes in
which they were supplied and do not experience
environmental extremes, the shelf life of a helmet
is not limited. However, it is not recommended that
a helmet should be in use five years after date of
manufacture.
So What Are The Differences?
A helmet is not just a helmet. They have many
different features providing specific user benefits,
such as:
• Weight: Some helmets are lighter than others.
A lightweight helmet may provide more comfort
during prolonged periods of use
• Cradle: A helmet can have either a basic
polyethylene cradle or a more comfortable textile
webbing cradle
• Sweatband: A helmet can have either none,
a standard or a high absorbent sweatband for
improved comfort during use
• Ventilation: Some helmets are ventilated,
providing cooling airflow during use
• Badging: Some helmet designs allow for a larger
front badging area, for an enhanced corporate
image
• Peaks: Peak lengths can vary – a reduced peak
is available for improved upward visibility
• Retro-Reflective Surfaces: Reflective surfaces
that provide greater visibility of the wearer in low
light conditions
144

Head Protection
Head Protection
145

Head Protection
Centurion Premium Safety Helmets
Centurion Concept Vented Full Peak Safety Helmet
CONFORMS TO EN 397, LD, -40°C, EN 50365 1000V A.C.
Maximum impact and lateral deformation protection. Extremely lightweight ABS Shell
weighs 318g, 20% lighter than most other helmets. Terylene cradle and Dry-Tech
sweatband. Extra nape protection. Crown and rear ventilation holes. Patented Combi
Slot for accessories. Compatible with Centurion Connect range of face and hearing
accessories. 40mm peak
• Size: 51-63cm
Colour: White
Code: 271135
Colour: Yellow
Code: 271189
Colour: Orange
Code: 271225
Colour: Blue
Code: 271236
Colour: Black
Code: 271238
Manufacturer’s code: S09WF
Manufacturer’s code: S09YF
Manufacturer’s code: S09OF
Manufacturer’s code: S09BF
Manufacturer’s code: S09KF
NEW
Centurion Concept Vented Full Peak
Wheel Ratchet Safety Helmet
CONFORMS TO LD, -40C, EN 50356 1000V A.C.
Maximum impact and lateral deformation
protection. Extremely lightweight ABS
shell - weighs 300g, 20% lighter than
most other helmets. Maximum comfort
and balance for prolonged wear. Terylene cradle
and hydro-flock sweatband. Extra nape protection.
Crown and rear ventilation holes. Connect slot
compatible with modular accessories
Colour: White
Manufacturer’s code: S09CWR
Code: 271222
Colour: Blue
Manufacturer’s code: S09CBR
Code: 271223
Centurion Concept Vented Reduced Peak Safety Helmet
CONFORMS TO EN 397, LD, -40°C, EN 50365 1000V A.C.
20% lighter than most other helmets. Maximum impact and side protection. 6 point
Terylene cradle with high absorbent sweatband. Unique ventilation system for improved
airflow. Compatible withCenturion Connect range of face and hearing accessories.
20mm peak
• Size: 51-63cm
• Colour: White
Code: 271134
NEW
Manufacturer’s code: S08WF
Centurion Concept Secure Plus
Safety Helmet - White
High safety with low weight. 4 Point Secure
Plus EN 397 chinstrap. ABS shell for
optimal strength to weight ration. Internal
card holder for medical information
Colour: White
Manufacturer’s code: S08CWLF
Code: 272405
146
Centurion Spectrum Overspec Safety Helmet
HELMET CONFORMS TO EN 397, -40°C, 1000V A.C, LD, MM & EN 50365
SPECTACLES CONFORM TO EN 166 1 B T & EN 170 2C-1, 2
A revolution in the integration of spectacles within industrial safety helmets. Added side impact protection (Lateral
Deformation within EN397). AquaDirect Rain Management system reduces water flow down the back of the neck.
Unique Venturi system provides optional ventilation for comfort during warmer conditions.
Anti-mist/anti-scratch coating on over-spectacles, with soft nose bridge for comfort. Full adjustment allows for use
over prescription eyewear: front pivot allows
over-spectacles to be adjusted closer to the cheek, for improved dust protection
• Size: 51-63cm
• Colour: White
Code: 272446
Manufacturer’s code: S20WRF
Centurion Vision Plus Safety Helmet
HELMET CONFORMS TO EN 397, EN166 - 1 A T (EN170) 2C-1,
2, -30°C, & EN 50365
A revolution in the integration of spectacles within
industrial safety helmets.
Grade A high energy impact protection to EN 166;
providing the highest impact protection possible. Antiscratch
and anti-mist coating. Designed to allow you
to wear prescription eyewear. Moulded design provides
improved lower cheek coverage
• Size: 51-63cm
• Colour: White, Yellow, Red, Blue, Green
Code: 431346
Manufacturer’s code: S10

Centurion Nexus Safety Helmet System
Centurion Nexus Core Vented Safety Helmet
Combines stylish looks with multi-standard protection. Its innovative accessories
allow adaptability in the field to suit specific tasks at hand. Optimised ‘micro’ peak
providing maximum upward visibility without compromising safety. High performance
ABS shell for improved low temperature and side impact protection. Unique rear
shell design providing increased nape protection. Premium Twist2Fit Ratchet
headband for easy adjustment. Optional innovative ventilation system for improved
airflow and wearer comfort. Euro accessory slots for compatible face screens and ear
defenders. Shown with High Intensity Reflective Stickers (272059 sold
separately, other colours available)
Colour: Ratchet, White
Code: 272026 Manufacturer’s code: S16EWRF
Head Protection
NEW
NEW
NEW
Centurion Nexus
Heightmaster Safety Helmet
APPROVED TO EN 12492, ANSI/ISEA Z89.1
CONFORMS TO EN 50365 AND EN 397 SHOCK
ABSORPTION, PENETRATION, LD & -40°C
The ideal working at height vented safety helmet
approved to EN 12492. Micro peak for improved
visibility. Lightweight replaceable liner. 4 point
EN 12492 replaceable chinstrap for improved
comfort. Fitted with premium wheel ratchet.
Shown with High Intensity Reflective Stickers
(sold separately)
• Colour: White
Manufacturer’s code: S16EWFMR
Code: 272424
Centurion Nexus
SecurePlus Safety Helmet
APPROVED TO EN 397, ANSI/ISEA Z89.1, EN 50365, CSA/CAN
Z94.1-05, TESTED TO THE PERFORMANCE REQUIREMENTS
OF AS/NZS 1801. CONFORMS TO LD, MM, -40°C
Micro peak vented safety helmet complete
with SecurePlus 4 point EN 397 replaceable
chinstrap and quick release buckle. Shown with
High Intensity Reflective
Stickers (sold separately)
• Colour: White
Manufacturer’s code: S16EWRL
Code: 272018
Centurion Nexus
Core Safety Helmet
APPROVED TO EN 397, ANSI/ISEA Z89.1, EN 50365,
CSA/CAN Z94.1-05, TESTED TO AS/NZS 1801.
CONFORMS TO LD, MM, 1000V A.C. -40°C, ANTI-
STATIC (IEC 600079-32)
General purpose unvented helmet. Modern
recreational styling combined with multistandard
protection. Shown with High Intensity
Reflective Stickers (sold separately)
• Colour: White
Manufacturer’s code: S16EWA
Code: 272042
Also available-Retractable
Eyeshields, ask for details
Centurion Nexus Liner
Lightweight and compact liner for
improved impact and penetration
protection. Adds extra protection in
conjunction with the EN 12492
S30NY harness, upgrading Core to
HeightMaster.
Manufacturer’s code: S30NL
Code: 272029
Centurion Linesman EN 397
Chinstrap
Linesman 4-point EN 397 Chinstrap
providing additional wearer comfort and
helmet stability. Fits Centurion Concept,
Nexus and Reflex helmets
Manufacturer’s code: S30LY
Code: 272027 Each £8.13
Centurion Replaceable
EN 12492 Chinstrap
High quality replaceable Nexus 4-point
Chinstrap with easy side adjustment
provides approval to EN 12492 working
at height (Mountaineering Helmet
standard) in conjunction with S30NL liner
Manufacturer’s code: S30NY
Code: 272028
147

Head Protection
Quality Safety Helmets
Centurion Reflex Safety Helmet
HELMET CONFORMS TO EN 397, -30°C, & EN 50365
Designed with safety in mind; supplied with a Silver rear flash as standard. Ventilation
is provided. Wide front corporate badging area. Combi-slot enables it to be compatible
with accessories
• Size: 51-63cm
• Colour: White with Hi-Vis Yellow Flash
Code: 271042
Manufacturer’s code: S12PLUS WHVY
KeepSAFE Comfort Plus Full Peak Safety Helmet
APPROVED TO EN 397, MM, -30°C, ANSI/ISEA Z89.1
General purpose helmet with 6 point Terylene cradle and brushed nylon sweatband
• Size: 51-63cm
Colour: White Code: 271290
Colour: Yellow Code: 271291
Colour: Red Code: 271293
Colour: Blue Code: 271292
Colour: Black Code: 271295
Colour: Orange Code: 271294
KeepSAFE XT Vented Wheel Ratchet
APPROVED TO EN 397, ANSI/ISEA Z89.1
General Purpose helmet with a 6 point Terylene cradle and brushed nylon sweatband.
Vented for airflow and comfort. Fitted with Premium Wheel Ratchet
Colour: White
Code: 271297
Colour: Blue
Code: 271298
Colour: Yellow
Code: 271299
KeepSAFE Standard
APPROVED TO EN 397, 440V A.C, MM, -10°C
General Purpose helmet with a 6 point plastic cradle. Fitted with Slip Ratchet
Colour: White
Code: 271281
Colour: Blue
Code: 271282
Colour: Yellow
Code: 271283
NEW
NEW
NEW
148
Centurion S54 Connect ®
Face Screen Carrier CONFORMS TO EN 166
Flip-up facility. Accepts all Connect face screens. Can be
used with Connect earmuffs
Code: 272469
Manufacturer’s code: S54CE
Centurion S590 Connect ® Polycarbonate
Face Screen CONFORMS TO EN 166 1.B.9.3
• Size: 225mm (9")
Code: 272460
Manufacturer’s code: S590
Centurion ® S591 Connect ® Acetate
Face Screen
• Size: 225mm (9")
Code: 430506
Manufacturer’s code: S591
Centurion S30E Connect ® Chinstrap
Elasticated chinstrap with chin cup for extra security
Manufacturer’s code: S30E
Code: 272432
Centurion S31N Connect ® Nylon Sweatband
Brushed nylon sweatband for improved comfort
Manufacturer’s code: S31N
Code: 272409

Specialist Safety Helmets
Centurion Vulcan High Heat Safety Helmet
CONFORMS TO EN 397: 2012. AND ANSI/ISEA Z89.1-2009 TYPE 1 CLASS G.
Designed for use in industries where there is a risk from high levels of radiant heat.
Brushed nylon sweatband. Terylene cradle. Fully compatible with Centurion hightemperature
range of accessories. Front, side and rear corporate badging area.
Ratchet adjusts to size 51cm to 63cm
• Colour: White (also available in Yellow, Green, Orange, Red)
Code: 272443
Manufacturer’s code: S22WA
Head Protection
Forestry Protection
Centurion 1100 Classic Forestry Kit
CONFORMS TO EN 352-3, HELMET TO EN 397:2012+A1:2012, MESH EN1731:1997
Complete system – safety helmet, face shield, ear muffs rain shield. Lightweight and
comfortable HPDE helmet complete with mesh forestry visor and hearing protection
• Colour: Orange
• Weight: 375g
Code: 272579 Manufacturer’s code: S251E0CF Each £37.79
SNR
28
3M Peltor G500 Forestry Headgear
CONFORMS TO EN 352-3 AND VISOR CONFORMS TO EN 1731F H=33 M=25 L=15 SNR=27
G500V5CH510 OR 5C visor and Optime 1 ear muffs. Up/down in 3 positions.
Ergonomic, adjustable ratchet harness – eight positioning. Can use in conjunction with
3M integrated eyewear and communication ear muffs
• Colour: Orange
Code: 276713
Manufacturer’s code: G500V5CH10-OR
SNR
27
3M Peltor G500 Industry Headgear
EAR MUFFS CONFORMS TO EN 352-3 H=32 M=25 L=15 SNR=27
VISOR CONFORMS TO EN 166 ABT
G500V5FH510-EU–5F-1 visor and Optime I ear muffs. Frontal lobe ventilation
channels. Up/down in 3 positions. Ergonomic, adjustable ratchet harness – eight
positioning. Can use in conjunction with 3M integrated eyewear and communication
ear muffs
• Colour: Yellow
Code: 276712 Manufacturer’s code: G500V5FH510-EU Each £45.67
SNR
27
149

Head Protection
Helmet Accessories
NEW
Combine and interchange head, face and hearing accessories
quickly and simply, fully compatible with all Centurion helmets.
NEW
Centurion Scala X Ear Defenders
SNR LEVEL: 25DB. APPROVED TO EN 352
Suitable for most general requirements (replaced the Baltic)
• Colour: White
Code: 254255
Manufacturer’s code: S71CE
Centurion Scala XI Ear Defenders
SNR LEVEL: 30DB. APPROVED TO EN 352
Excellent noise protection, especially for high frequencies (replaced the Aegean)
• Colour: White
Code: 254412
Manufacturer’s code: S72CE
NEW
Centurion Contour General
Multi Screen
Contour XI screen designed to protect against Arc
Flash risks posed by electrical faults, and tested
in accordance with EN 166 impact protection.
Polycarbonate moulded screen for both impact
protection and Arc protection. NEW easy fit screen.
Anti-fog, anti scratch coating. Integrated Chinguard
Code: 272053
Manufacturer’s code: S810
Centurion Contour Carrier
Carrier for use with Contour XI Multi Purpose
Moulded Face Screen and Contour X
General Purpose Moulded Face Screen.
Low profile, pivoting system follows
helmet contour for improved balance
and versatility. Unique TPE rubber collar is fitted as standard to help block
falling debris. Multi pivot functionality for maximum versatility. Complete with
Euro 30mm accessory compatibility. Contour system is for fitting to
Nexus and Concept helmets
Code: 272052
Manufacturer’s code: S55
Centurion Contour General
Purpose Screen
Face screen with General Purpose Impact
protection. Polycarbonate moulded screen for
impact protection. NEW easy fit screen for
versatility
Code: 272049
Manufacturer’s code: S800
Centurion S54
Connect ® Face Screen Carrier
CONFORMS TO EN 166
Flip-up facility. Accepts all Connect face screens. Can be used with Connect earmuffs
Code: 272469
Manufacturer’s code: S54CE
Centurion S590 Connect ® Polycarbonate Face Screen
CONFORMS TO EN 166 1.B.9.3
• Size: 225mm (9")
Code: 272460
Manufacturer’s code: S590
Centurion ® S591 Connect ® Acetate Face Screen
• Size: 225mm (9")
Code: 430506
Manufacturer’s code: S591
Centurion S30E Connect ® Chinstrap
Elasticated chinstrap with chin cup for extra security
Manufacturer’s code: S30E
Code: 272432
Centurion S31N Connect ® Nylon Sweatband
Brushed nylon sweatband for improved comfort
Manufacturer’s code: S31N
Code: 272409
150

Personal Identification Systems
Enables workers to effectively and
securely carry their Emergency ID.
In an accident, the system provides
the on-site medical team member
or attending ambulance staff instant
access to the victim’s potential
lifesaving information and enables
emergency contacts to be quickly
notified of the situation 24/7.
Worker Emergency ID products
are a tested, proven and Beffective
solution to strengthen on-site safety
and risk management.
Mining Utilities Railway
Heavy Industry Construction Oil & Gas
Head Protection
The Universal Fit WSID-05 has been fully redesigned for maximum durability and versatility.
It can be used in a wide range of industries by first responders and paramedics in the event
of an accident or a medical emergency.
Step 1
Attach ID
sticker to
helmet
Step 2
Pull tag
to access
information
Step 3
Worker
information
revealed
The unique silicone ‘stretch-ring’ fitting system allows flexibility in fitting.
Features a fully waterproof ID card and new gasket sealed lid design to keep your personal
recorded information safe and secure against the elements.
The Universal ID is durable and tough ensuring long life and dependable service.
Vital ID Helmet Worker
Identity ID Sticker
In Case of Emergency (ICE) stickers. Cost-effective
solution. Strengthens your on-site safety procedures/
worker information records. Essential for work sites
with large worker numbers, frequent staff rotation/
turnover. Fully secure – security flap protects worker’s
information. 3M reflective material, 100% waterproof.
Will not weaken or damage safety helmets
Size: 7cm x 1.5cm
Code: 343284 Manufacturer’s code: WSID-01
Greater reflective output. Easier identification. User’s
name visible without opening sleeve
Size: 8.5cm × 2cm
Code: 343286 Manufacturer’s code: WSID-02
Vital ID Worker
Emergency Universal Fit ID
A versatile ID System that can be used in a number
of ways. Impact-resistant casing with shielded hinge.
Weatherproof design with gasket seal. Universal fitting
system: keyring, lanyard, belts, harness. Stretch-ring
fitting system and spring loaded keyring hook
• Size: 6 × 3cm
Code: 343287
Manufacturer’s code: WSID-05
Vital ID Temporary Use Worker ID
Low cost solution to identify workers on site. Easily
removed after use. Adhesive does not damage hard hat
in any way. One pack is sufficient for 25 workers
• Main label size: 7.5cm × 2.5cm
Code: 101120
Manufacturer’s code: WSID-03
151

Head Protection
Dry Helmet Cooling
NEW
Centurion Kalis Dry Cooling Helmet Pad
This new patented Dry Cooling innovation provides
enhanced cooling comfort for the wearer as it is 100%
dry and cools the head down to 15°C below ambient
temperature. Activation is only required every 1-3 days
(dependent on humidity and airflow). Anti-bacterial.
Utilises technology found in high end sports clothing
Code: 271417
Manufacturer’s code: S31DCHP
B
Cold Weather Hood Systems
NEW
S50FL Centurion ®
Universal Fleece Liner
Keeps head, ears, neck warm. Fits between cradle
and helmet shell. Full integration, plus helmet security.
CE approved to fit all listed Centurion ® helmets
• Colour: Black
Manufacturer’s code: S50UFL
Code: 271211
S50HVYFC Centurion ®
Helmet Frost Cape
Reflective strip, high visibility colour. Attaches to fleece
liner. Material meets EN 471 specification
Colour: High Visibility Yellow
Manufacturer’s code: S50HVYFC
Code: 271432
Colour: High Visibility Orange
Manufacturer’s code: S50HVOFC
Code: 271430
Centurion ®
High Visibility Sun Cape
Lightweight Sun Cape that protects against
UltraViolet UPF 50+, blocks 98% of UV
radiation. Using fabric developed specifically to
keep the wearer dry, cool and comfortable. CE
approved to fit all Centurion helmets. Conforms
to EN 471
Colour: High Visibility Orange
Manufacturer’s code: S51HVO
Code: 271440
Colour: High Visibility Yellow
Manufacturer’s code: S51HVY
Code: 271439
NEW
152
Scott Cold Weather
Helmet Liners
Zero Hood Range.
Thinsulate Lined.
Waterproof and windproof
Colour: HXZH/S Black
Manufacturer’s code: HXZH/S
Code: 430412 Each £11.15
Colour: HXZH/HY Yellow
Manufacturer’s code: HXZH/HY
Code: 430420 Each £14.05
Colour: HXZH/HO Orange
Manufacturer’s code: HXZH/HO
Code: 430419 Each £14.05
Colour: HXZH/E Black
Manufacturer’s code: HXZH/E
Code: 431925 Each £6.38
Centurion ® Helmet Face Warmer
Offers versatile protection against extreme
adverse weather conditions. Fits to Helmet Frost
Cape for total head protection
• Colour: Black
Manufacturer’s code: S50FW
Code: 271431

First Base 3 Bump Protection
Patented flexible shell design, manufactured from durable ABS plastic. Breathable cap fabric with high levels of ventilation.
This reduces heat stress and improves wearer comfort. Contamination free cap design - no risk to process.
Suited to applications in precision engineering and the food industry.
NEW
Breathability
• High levels of ventilation
Comfort
• Compressed closed cell foam
• Wide and absorbent terry
towelling sweatband
Peak
• Low profile design
• Machine washable
Unique Size Adjustments
• Improves security of the cap
Scott Safety First Base 3 HC24 Bump Cap
Perfect blend of comfort, stability and balance. Highly breathable
with a micro perforated shell. Ventilation systems and humidity
reducing. Wicking fabric sweatband included. Abs plastic shell,
design to adapt contour of the head
Manufacturer’s code: HC24HO/SP/CLA
Colour: Hi-vis Orange
Code: 431228
Manufacturer’s code: HC24/CLA/RP
Colour: Hi-vis Yellow
Code: 430414
Manufacturer’s code: HC24/CLA/SP/GREY
Colour: Grey
Code: 431225
Manufacturer’s code: HC24/CLA/SP/NB
Colour: Navy
Code: 279057
Manufacturer’s code: HC24/CLA/SP/RB
Colour: Royal Blue
Code: 431226
Manufacturer’s code: HC24/CLA/SP/RED
Colour: Red
Code: 4304155
Manufacturer’s code: HC24/CLA/SP/BLK
Colour: Black
Code: 431224
Manufacturer’s code: HC24/CLA/SP/DG
Colour: Green
Code: 430413
Head Protection
Centurion AirPro
SecurePlus Baseball
Bump Cap
APPROVED TO EN 812
A baseball bump cap designed to
provide unrivaled head retention
and wearer comfort. The first
ever baseball bump cap to
incorporate Centurion’s patentpending
ratchet adjustment
system. New design for optimal
ventilation and shape. Reduced
peak (30mm) and Designed for
maximum breathability. Corporate
badging via embroidery or
transfer print
Manufacturer’s code: S38NBRPR
Colour: Navy
Code: 279811
Manufacturer’s code: S38KRPR
Colour: Black
Code: 279812
Centurion Standard Peak
Airpro Baseball Bump Cap
Ref: S38
Peak length 5cm. Lightweight head
protection
• Size: 54-62cm
• Other colours are available
Manufacturer’s code: S38NB
Colour: Navy Blue
Code: 279080
Manufacturer’s code: S38K
Colour: Black
Code: 279801
Centurion Standard Peak
High Visibility Airpro Baseball
Bump Cap Ref: S38
Peak length 5cm.
Lightweight head protection
• Size: 54-62cm
Manufacturer’s code: S38HVO
Colour: High Visibility Orange
Code: 279805
Manufacturer’s code: S38HVY
Colour: Saturn Yellow
Code: 279806
Scott Safety First Base 3
HC23 Beanie Bump Cap
CONFORMS TO EN812:A1
Stylish element to protective headwear,
whilst retaining the practicality of an
approved bump cap. Designed to provide
protection against effects of striking the
head against hard, stationary objects
Manufacturer’s code: HC23/BLK
Colour: Black
Code: 431229
Manufacturer’s code: HC23/GREY
Colour: Grey
Code: 431230
Manufacturer’s code: HC23/NB
Colour: Navy Blue
Code: 431231
153

Hearing Protection
Buying Guide
LEGISLATION UPDATE: From 21st April 2018 hearing protection will be re-classified
from Category II to Category III types of risk. New products placed on the market from
this date will face even stricter tests for conformity and certification.
Existing hearing protection can continue to be placed on the market under a Cat II EC
Cert until 21st April 2019. After this date ALL hearing protection needs to be certified to
Cat III under the regulation.
Product already on the market (with distribution) can continue to be sold under either.
As a responsible PPE supplier you can have confidence that our products will meet
conformance to the existing and new standards as appropriate.
Step 1. Detection
When a noise survey is required, it must be carried out by
a competent person such as a noise consultant.
Step 2. Protection
Use the information gained during the survey to select HPE
with the right level of attenuation.
Step 3. Education and training
Not every member of your workforce will know all the
benefits or understand how best to use their protection.
Step 4. Validation
Every user is different, how do you make the workforce
is adequately, individually protected?
Just because it fits, doesn’t mean it works
There are many helmet manufacturers who produce ear muffs for use
with their helmets. There are also many manufacturers that specialise
in producing one or the other, and distributors will offer a range of
both products to give you the best choice. If you select products from
different sources, make sure you check that the ear muffs have been
tested on the specific make and model of helmet with which you plan
to use them. Manufacturers are well aware of the situation and many
co-operate to have their products tested together, so that the customer
can select the combination they prefer as the most appropriate.
So, if you want to use an ear muff with a particular helmet, make
sure they have been certified together.
Remember, just because it fits, doesn’t mean it works.
SNR
39
SNR (Single Number Rating).
SNR is the number of potential decibels the hearing protection will
reduce the noise level by, if fitted correctly.
The aim is to find a suitable product that brings noise level down to between 70 and
80 decibels. Over protection should also be avoided, as people may not be able to hear
important every day sounds. SNR is only a general means of comparing different sound
protection levels for different hearing protection.
154
Bristish Safety Industry Federation
Most safety helmets have a facility, usually an accessory slot at each side,
to allow them to be fitted with earmuffs and other accessories. Also, many
manufacturers offer helmet mounted earmuffs specifically for the purpose.
Often the fitting points of the helmet and earmuff are of a ‘standard’ size
and style, but here a significant issue arises:
If you select a helmet and earmuffs from the same manufacturer, it is likely that
they have been approved for use together. The manufacturer in question should
make this clear in the product information. If, however, you select a helmet from one
manufacturer, and helmet mounted earmuffs from another, they may well fit together,
but unless you can see that they have been performance tested together there is
nothing to show the earmuffs will provide protection!
One of the features determining the performance of earmuffs is the force produced by
the spring arm. This is to maintain the seal of the cushion around your ear.
You may have selected the most suitable helmet for you or your workforce, and also
the most appropriate earmuff for the noise hazard, also taking into account weight,
comfort, user acceptance, etc, but without testing for use in combination you cannot
assume that the earmuff will provide the expected protection.
Both the helmet and the earmuffs should be CE marked. This mark shows that a
product meets the necessary legal requirements however it does not tell you anything
about its performance for any given application or task.
There are different ways to gain the CE mark but the most common is to have a
product certified using a harmonised European standard (see ‘CE Marking and Product
Certification’ below). For helmet mounted earmuffs the standard is EN352‐3, and it
requires products to be tested together and manufacturers to specify the models of
helmet tested with the earmuffs.
RNR*

Hearing Protection
Hearing Protection
155

Hearing Protection
Foam Ear Plugs
SNR
39
SNR
37
3M E-A-Rsoft FX Foam Ear Plugs
CONFORMS TO EN 352-2 H=39 M=36 L=34 SNR=39
Flanged shape – assists ease of insertion. Smooth tapered finish – enhances
comfort. High attenuation at 39dB
• Colour: Yellow
Uncorded
Code: 254440 Manufacturer’s code: ES.01.020 Box of 200 pairs
Corded
Code: 254442 Manufacturer’s code: ES.01.021 Box of 200 pairs
Howard Leight Foam Ear Plugs
CONFORMS TO EN 352-2 H=36 M=35 L=34 SNR=37
Designed for improved fit and attenuation
• Colour: Orange
Uncorded, Max-1
Code: 254071 Manufacturer’s code: 3301161 Box of 200 pairs
Corded, Max-30
Code: 254072 Manufacturer’s code: 3301130 Box of 100 pairs
SNR
37
SNR
38
156
3M 1100 Foam Ear Plugs
CONFORMS TO EN 352-2 H=37 M=34 L=31 SNR=37
Soft, hypo-allergenic polyurethane foam. Smooth, dirt resistant surface.
Tapered design fits most ear canals. Maximum comfort
• Colour: Orange
Uncorded
Code: 254291 Manufacturer’s code: 1100 Box of 200 Pairs
Corded
Code: 254290 Manufacturer’s code: 1110 Box of 100 Pairs
3M E-A-R Push-Ins Foam Ear Plugs
CONFORMS TO EN 352-2 H=37 M=36 L=34 SNR=38
Insertion stem ensures quick, easy fitting (no roll down). Optimal protection at
38dB. Soft, pliable foam body – maximum comfort, seal
• Colour: Blue stem, Yellow plug
Uncorded
Code: 254443 Manufacturer’s code: EX.01.021 Box of 100 Pairs
Corded
Code: 254444 Manufacturer’s code: EX.01.020 Box of 100 Pairs

Foam Ear Plugs
SNR
28
Hearing Protection
3M E-A-R Classic Foam Ear Plugs
CONFORMS TO EN 352-2 H=30 M=24 L=22 SNR=28
Soft, energy absorbing polymer foam. Excellent hearing
protection. All-day comfort
• Colour: Yellow
Manufacturer’s code: PP.01.002
Code: 254248
Box of 250 pairs
SNR
36
Moldex Pura-Fit To Go 7705
CONFORMS TO EN352 H=35 M=33 L=31 SNR=36
Comfortable PU ear plugs suited to protect against
long-term exposure. Keeps plugs hygienic between use.
For protection against higher noise levels. Made from
soft material that is easy to insert
Manufacturer’s code: 7705
Code: 431407
Box of 50 pairs
SNR
35
SNR
22
Moldex Spark Plug Ear Plugs 7800
CONFORMS TO EN 352 H= 34 M=32 L=31 SNR=35
Comfortable PU earplugs suited to protect against long-term exposure. Contoured
shape. Colourful & appealing. Comfortable and soft material. Easy to insert
Code: 254249 Manufacturer’s code: 7800 Box of 200 Pairs Each
Moldex Mellows Ear Plugs 7600
CONFORMS TO EN 352 H=26 M=18 L=12 SNR=22
Comfortable PU earplugs suited to protect against long-term exposure. For
protection against lower noise levels. Designed to keep you in touch with your
environment. Comfortable and soft material. Easy to insert
Code: 431341 Manufacturer’s code: 7600 Box of 200 Pairs Each
157

Hearing Protection
Foam Ear Plugs
SNR
26
SNR
26
uvex xact-fit
•SNR 26 dB. The easiest plug to fit giving accurate fitting every time. Tapered
plug shape fits natural shape of the ear canal for easy, comfortable secure fitting.
Ergonomic stem marked left and right with thumb indentations for easy fitting. left
and right fitting ensures consistently accurate insertion and optimum protection.
Adjustable neck cord. Low pressure, sealed PU foam reduces the potential for
contamination. Replacement pods help prolong the life of the product
• Colour: Lime
• Corded
Code: 431955
Manufacturer’s code: 2124-001 Box 50 pairs, paired in minibox
uvex xact-fit replacement earplugs
Manufacturer’s code: 2124-200
Code: 431431
Box 250 pairs, 5 pairs per mini box
SNR
37
uvex x-fit
SNR 37 dB. Disposable foam ear plug. Tapered shape that fits the natural shape
of the ear canal. X emboss helps reduce pressure on the ear canal due to there
being less material. Also aids easy and hygienic removal after use. Low pressure
sealed PU foam, reduces the potential for contamination and gently expands to fit
the size and shape of the ear canal. Compatible with other items of PPE
• Colour: Lime
Uncorded Manufacturer’s code: 2112-001
Code: 431432
Corded Manufacturer’s code: 2112-010
Code: 431433 Box 100
200 pairs, bagged in pairs
158

Foam Ear Plugs
SNR
36
SNR
29
Hearing Protection
3M E-A-R E·A·Rsoft Yellow Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=34 L=31 SNR=36
PU polyurethane foam. Ultimate in comfort and protection
• Colour: Yellow
Uncorded
Code: 254187 Manufacturer’s code: ES.01.001 Box of 250 pairs
Corded
Code: 254185 Manufacturer’s code: ES.01.005 Box of 200 pairs
3M E-A-R Classic Corded Foam Ear Plugs
CONFORMS TO EN 352-2 H=30 M=26 L=23 SNR=29
Classic ear plugs with easy-to-see blue vinyl cord. Particularly suitable for use in
manufacturing and process industries
• Colour: Yellow
Code: 254239 Manufacturer’s code: CC.01.000 Box of 200 pairs
Howard Leight LL1 Laser Lite ® Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
• Self adjusting foam – expands to fit virtually every wearer
• Contoured T-shape – easy insertion and wear
• Vibrant colours – visible protection
• Colour: Pink/Yellow
Uncorded
Code: 293510 Manufacturer’s code: 3301105 Box of 200 pairs
Corded
Code: 293411 Manufacturer’s code: 3301106 Box of 100 pairs
SNR
35
159

Hearing Protection
Moulded Ear Plugs
SNR
30
SNR
32
SNR
27
Howard Leight Smart Fit Moulded
Re-usable Corded Ear Plugs
CONFORMS TO EN 352-2 H=32 M=27 L=23 SNR=30
Revolution in comfort and individual fit. Advanced
material – uses body heat to adapt to ear canal. Unique
detachable cord, smart HearPak pocket case
• Colour: Orange
Manufacturer’s code: 1011239
Code: 254094
Box of 50 Pairs
3M E-A-R Ultrafit Moulded Reusable
Corded Ear Plugs
CONFORMS TO EN 352-2 H=33 M=28 L=25 SNR=32
Unique one-size, fits most ear canals comfortably. High
attenuation
• Colour: Yellow
Manufacturer’s code: UF.01.020
Code: 254090
Box of 50 Pairs
uvex whisper +
SNR 27 dB. Reusable, pre-shaped plug, no
need to touch the part that goes into the ear for
reduced risk of contamination and increased
hygiene. Tapered smooth fins which fit the
natural shape of the ear canal. Comfortable skin
contact. Reduced pressure for long term wear.
Comes with hygiene box for storage when not in
use. Can be washed and stored for repeated use
• Colour: Lime
• Corded
Manufacturer’s code: 2111-238
Code: 431434
Box of 50 Pairs
SNR
30
SNR
20
160
Moldex Rocket Reuseable Corded Ear Plugs
CONFORMS TO EN 352-2 H=26 M=26 L=24 SNR=30
Suitable to protect against long term exposure. Reuseable and washable. Solid handle
for easy insertion
• Colour: Purple/Lime
Code: 430290 Manufacturer’s code: 6401 Box of 50 Pairs
3M E-A-R Ultrafit 20 Moulded Re-usable
Corded Ear Plugs
CONFORMS TO EN 352-2 H=25 M=17 L=10 SNR=20
Extra attenuation. Correctly matched to noise level, allows conversation to be heard.
Washable up to 50 times
• Colour: Yellow
Code: 254091 Manufacturer’s code: UF.01.012 Box of 50 Pairs

Detectable Ear Plugs
Available in either foam or moulded finish and fitted using detectable components – either a steel ball bearing or
non-ferrous filter, with non-food blue cord - making them ideal for use in food industries. Foam ear plugs are usually
disposable, while moulded ones are reusable.
SNR
36
NEW
Hearing Protection
SNR
24
3M E-A-R Soft Detectable Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=34 L=31 SNR=36
Smooth shape - comfortable insertion. High attenuation.
Fully detectable cord, integral stainless steel ball
• Colour: Blue
Manufacturer’s code: ES.01.011A
Code: 254207
Box of 200 pairs
uvex Hi-Com
Detectable Corded Plugs
APPROVED TO: EN352-2. COMPLIES WITH ISO 9001
Blue coloured cord and plug for increased visibility and security against
contamination. Iron enriched material and metal ferrules at the ends for
increased detectability. Low-attenuating earplug scientifically designed to
absorb more inner-ear sounds which can be experienced when wearing
hearing protection in quieter areas. Tapered shape is designed to fit the natural
shape of the ear canal, reducing pressure
• Colour: Blue
Code: 254205
100 pairs. Bagged in pairs
SNR
35
SNR
32
SNR
30
Howard Leight Laser Trak
Detectable Foam Ear Plugs
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
Ideal for hygiene sensitive environments.
Non-ferrous metal safety component.
Traced visually or by metal detection
• Colour: Orange/Blue
3M E-A-R Tracer
Detectable Moulded Ear Plugs
CONFORMS TO EN 352-2 H=33 M=28 L=25 SNR=32
Unique one-size comfortably fits most ear canals.
High attenuation
• Colour: Blue
Howard Leight Smart Fit
Detectable Moulded Ear Plugs
CONFORMS TO EN 352-2 H=32 M=27 L=23 SNR= 30
Advanced material - uses body heat to adapt to ear
canal. Shapes to the users ear canal. Increases user
acceptance and compliance
• Colour: Blue
Manufacturer’s code: 3301167
Code: 254348
Pack of 100 pairs
Manufacturer’s code: TR.01.000
Code: 254092
Box of 50 pairs
Manufacturer’s code: 1012522
Code: 254095
Box of 50 pairs
161

Hearing Protection
Foam Ear Plug Dispensing Systems
An ideal solution for where the noise level is greater than 85 decibels and hearing protection is required all the time,
these can be positioned at the point of entry, helping to enforce employee usage of hearing protection.
SNR
36
3M E-A-R E·A·Rsoft
Yellow Neons Foam
Ear Plugs Refill Bottle
CONFORMS TO EN 352-2 H=34 M=34 L=31 SNR=36
• Colour: Yellow
Code: 254277 Manufacturer’s code: PD.01.002 Refill of 500 pairs
3M E-A-R One Touch
Pro Industrial Dispenser
Accurately dispenses one earplug at
a time. Specifically designed for tough
environments and repeated use.
Flexibility to be used free-standing or
secured easily to a wall. Stock level visible
through clear refill bottle. 500 pairs per recyclable refill bottle (sold separately)
Code: 254301 Manufacturer’s code: 391-0000 Each
SNR
28
3M E-A-R Classic Foam Ear Plugs Refill Bottle
CONFORMS TO EN 352-2 H=30 M=24 L=22 SNR=28
• Colour: Yellow
Code: 254276 Manufacturer’s code: P.D.01.001 Refill of 500 pairs
SNR
37
SNR
37
SNR
35
SNR 35
Howard Leight LS400 Ear
Plug Dispenser
Fully transparent. Eye catching design encourages use.
Either wall mounted or free standing. Dispenses MAX
and Laser Lite refill packs (see below)
Code: 254077 Manufacturer’s code: 1013040 Each
MAX-ID Foam Ear Plug Refill Pack for LS400 Dispenser
CONFORMS TO EN 352-2 H=38 M=35 L=34 SNR=37
Code: 254078 Manufacturer’s code: 1013046 Pack of 200 pairs
Howard Leight LS500 Leight
Source Dispenser
Highly visible. Easy to use. Bulk fill facility –
saves time, packaging waste. Dispenses MAX
and Laser Lite refill packs - (see below)
Code: 254361 Manufacturer’s code: 3301273 Each
MAX-ID Foam Ear Plug Refill Pack for LS500 Dispenser
CONFORMS TO EN 352-2 H=36 M=35 L=34 SNR=37
Code: 254080 Manufacturer’s code: 3301165 Pack of 500 pairs
162
LL-ID Laser Lite Foam Ear Plug Refill Pack for LS400
Dispenser
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
Code: 254079 Manufacturer’s code: 1013047 Pack of 200 pairs
LL-ID Laser Lite Foam Ear Plug Refill Pack for LS500
Dispenser
CONFORMS TO EN 352-2 H=34 M=32 L=31 SNR=35
Code: 254342 Manufacturer’s code: 3301271 Pack of 500 pairs

Foam Ear Plug Dispensing Systems
SNR
35
SNR
35
Hearing Protection
Moldex Large Spark Plug Station 7850
CONFORMS TO EN 352 H=34 M=32 L=31 SNR=35
Ear plug dispensing system - available in two sizes. Plugs remain hygienic. Dispenser
mechanism is replaced automatically. Mounting bracket available separately. Ear plugs
are made from soft material that is easy to insert
Code: 254297 Manufacturer’s code: 7850 Contains 500 pairs
Moldex Small Spark Plug Station 7825
CONFORMS TO EN 352 H=34 M=32 L=31 SNR=35
ar plug dispensing system - available in two sizes. Plugs remain hygienic. Dispenser
mechanism is replaced automatically. Mounting bracket available separately. Ear plugs
are made from soft material that is easy to insert
Code: 014135 Manufacturer’s code: 7825 Contains 250 pairs
Moldex Mounting Bracket for all Moldex Stations
Wall mount for all Moldex Stations
Code: 014122 Manufacturer’s code: 7060
SNR
22
SNR
22
Moldex Large Melows Station 7650
CONFORMS TO EN 352 H=26 M=18 L=12 SNR=22
Ear plug dispensing system - available in two sizes. Plugs remain hygienic. Dispenser
mechanism is replaced automatically. Mounting bracket available separately. Ear plugs
are made from soft material that is easy to insert
Code: 430304 Manufacturer’s code: 7650 Contains 500 pairs
Moldex Small Melows Station 7625
CONFORMS TO EN 352 H=26 M=18 L=12 SNR=22
Ear plug dispensing system - available in two sizes. Plugs remain hygienic. Dispenser
mechanism is replaced automatically. Mounting bracket available separately. Ear plugs
are made from soft material that is easy to insert
Code: 431344 Manufacturer’s code: 7625 Contains 250 pairs
163

Hearing Protection
Banded Semi-Aural Ear Plugs
Finished in either a foam or moulded tip, these are ideal for intermittent use, being easy to
put on or take off or simply store around the neck. Providing less protection than plugs or
ear muffs, they are not usually recommended for continuous long-term wearing.
To insert, reach around the back of your head and pull outward and upward on the ear.
Using the large ends of the pods, swivel them to direct the tips into the ear canal opening.
Firmly push and wiggle the pods into the canals until a snug seal is obtained.
SNR
26
SNR
23
SNR
23
3M 1310 Banded
Semi-Aural Ear Plugs
CONFORMS TO EN 352-2 H=30 M=22 L=19 SNR=26
Innovative flexible band. Soft round foam plugs.
Optimum fit, superior comfort
• Colour: Orange
• Packed in cartons of 50
Howard Leight QB3/Hyg
Quiet Banded Semi-Aural Ear Plugs
CONFORMS TO EN 352-2 H=25 M=19 L=17 SNR=23
Super soft pads rest outside the ear. Outstanding
comfort. Patented band design - prevents ear pads
touching contaminated surfaces
• Colour: Orange
Moldex Jazz-Band Banded Ear Plugs
CONFORMS TO EN 352 H=26 M=19 L=17 SNR=23
Cost effective convenient option against
intermittent noise. Very low band pressure for extra
comfort. Neck cord with safety release mechanism.
Comes with a spare pair of replacement pods.
Replacement pods available separately
Manufacturer’s code: 1310
Code: 254279Pair
Manufacturer’s code: 3301279
Code: 254349
Box of 10 Pairs
Manufacturer’s code: 6700
Code: 430295
Pair
SNR
27
SNR
23
SNR
21
3M E-A-R Caps
Banded Semi-Aural Ear Plugs
Moldex WaveBand 1K
Banded Ear Plugs
CONFORMS TO EN 352 H=30 M=23 L=22 SNR=27
Cost effective convenient option against intermittent
noise. Very low band pressure for extra comfort. Worn
under the chin, keeping it away from the wearers body
and clothing. Replacement pods available separately
Manufacturer’s code: 6810
Code: 431343
Pair
CONFORMS TO EN 352-2 H=27 M=19 L=17 SNR=23
One of the lightest semi-aural hearing devices. Day-long
protection. Ideal disposable protectors for visitors
• Colour: Yellow
• Packed in cartons of 40
Manufacturer’s code: EC.01.000
Code: 254221Pair
Spare caps
Manufacturer’s code: ES.01.301
Code: 254992
Pack of 50 Pairs
KeepSAFE Banded Semi-Aural
Ear Plugs
Banded ear plug with soft PU foam tips. SNR 21
Code: 254166
Each
Code: 254165 Box of 40
164

Communication Headsets
Electronic Level Dependent Ear Muffs
SNR
32
SNR
32
SNR
31
Hearing Protection
3M PELTOR ProTac III
Headset Headband
The 3M PELTOR ProTac III Slim and 3M PELTOR
ProTac III headsets are hearing protectors that
help protect against harmful noise, whilst allowing
ambient sounds such as conversation, warning signals,
approaching vehicles, or sounds in machines and
processes to be heard at a level below 82dB. SNR 32.
Environmental microphones for level-dependent hearing
protection and ambient listening. 3.5mm listen only
stereo input (limited to 82dB) for connection to external
devices (e.g. cell phone, two-way radio, Ipod). Voice
guided menu system to prevent you from taking the
headset off. Available in headband or helmet attachment
options. Compatible with radios for listening only
Manufacturer’s code: MT13H221A
Code: 254316
Pair
3M PELTOR WorkTunes
Pro AM/FM Headset
SNR=32 DB H=34 DB M=29 DB L=22 DB
Protect your hearing and listen to AM/FM radio at
the same time with built-in antenna. Digital station
search and voice guided menu system with announced
frequencies. 3.5mm listen only stereo input (limited to
82 dB) for connection to external devices (e.g. mobile
phone, radio, two-way radio and iPod). Auto power off
turns headset off after 4 hours of non-use, to save
energy and a low-battery warning informs you when to
change batteries. To reduce the corrosion caused by
sweat the electronics are located in the outer part of the
cup. Store up to 5 stations on the headset. Battery life
= 40 hrs
• Colour: Black
Manufacturer’s code: HRXS221A
Code: 254315
Pair
3M Peltor Optime
Push-To-Listen Ear Muffs
CONFORMS TO EN 352-1 & EN 352-3 H=32 M=29 L=21
SNR=31
On push of a button, muff opens up - so speech,
warning signals can be heard. Can be closed, or
automatically shuts off after 30 seconds
• Colour: Black
• Weight: 490g
Manufacturer’s code: MT155H530A 380
Code: 254143
Pair
3M PELTOR Optime III Premium Ear Muffs
For use in extremely noisy environments. Minimises resonance in the holder casings. Maximum high-frequency attenuation
SNR
35
SNR
35
3M PELTOR Optime III H540A Headband Ear Muffs
CONFORMS TO EN 352-1 H=40 M=32 L=23 SNR=35
• Colour: Black/Red
• Weight: 285g
Code: 254335 Manufacturer’s code: H540A-411-SV Pair
3M PELTOR Optime III H540B Neckband Ear Muffs
CONFORMS TO EN 352-1 H=40 M=32 L=23 SNR=35
• Colour: Black/Red
• Weight: 270g
Code: 254330 Manufacturer’s code: H540B-412-SV Pair
165

Hearing Protection
Ear Muffs
3M PELTOR Optime II Premium Ear Muffs
For demanding noise-hazard environments. Sealing rings filled with unique combination of liquid and foam.
Optimum seal, with comfortable, low contact pressure.
SNR
31
SNR
31
SNR
30
3M PELTOR Optime II H520
Safety Helmet Attachment Ear Muffs
3M PELTOR Optime II H520A
Headband Ear Muffs
CONFORMS TO EN 352-1 H =34 M=29 L=20 SNR=31
• Colour: Black/Green
• Weight: 210g
Manufacturer’s code: H520A-407-GQ
Code: 254133Pair
3M PELTOR Optime II H520B
Neckband Ear Muffs
CONFORMS TO EN 352-1 H=34 M=29 L=20 SNR=31
• Colour: Black/Green
• Weight: 195g
Manufacturer’s code: H520B-408-GQ
Code: 254137
Pair
CONFORMS TO EN 352-3 H=34 M=28 L=19 SNR=30
• Colour: Black/Green
Ref H52OP3H Weight: 240g
Manufacturer’s code: H520P3H-410-GQ
Code: 254202
Pair
Ref H52OP3E Weight: 235g
Manufacturer’s code: H520P3E-410-GQ
Code: 254350Pair
3M PELTOR Optime I Premium Ear Muffs
Versatile, lightweight protection. Low profile, generous inside depth – comfortable to wear. Easy teaming with other equipment.
SNR
27
SNR
26
3M PELTOR Optime I H510A Headband Ear Muffs
CONFORMS TO EN 352-1 H=32 M=25 L=15 SNR=27
• Colour: Yellow
• Weight: 180g
Manufacturer’s code: H510A-401-GU
Code: 254136
Pair
3M PELTOR Optime I H510B Neckband Ear Muffs
CONFORMS TO EN 352-1 H=30 M=24 L=15 SNR=26
• Colour: Yellow
• Weight: 165g
Manufacturer’s code: H510B-403-GU
Code: 254135Pair
166

Moldex M Series
Modlex ear muffs are extremely comfortable and are made to resist even the most extreme conditions.
A focus on design makes the ear muffs easy to use and look great.
M-series: M4, M5 and M6
The M-series ear muffs are high quality material with a seamless workmanship to make these ear muffs robust and
durable. Extremely soft foam air cushions as well as low contact pressure ensure high wearer comfort.
Hearing Protection
SNR
30
SNR
27
SNR
30
Moldex M-Series
6110 M4 Ear Muffs
CONFORMS TO EN 352-1 H=34 M=27 L=20 SNR=30
Robust headband retains shape. Ribbed air cushions for
cool comfort. Flexible and lightweight. Viscoelastic foam
cushions - better pressure distribution for more comfort.
Extra wide ear space
Manufacturer’s code: 6110
Code: 431337Pair
Moldex M-Series
6120 M5 Ear Muffs
CONFORMS TO EN 352-1 H=39 M=31 L=23 SNR=27
Robust headband retains shape. Ribbed air cushions for
cool comfort. Flexible and lightweight. Viscoelastic foam
cushions - better pressure distribution for more comfort.
Extra wide ear space
Manufacturer’s code: 6120
Code: 431338Pair
Moldex M-Series
6130 M6 Ear Muffs
CONFORMS TO EN 352-1 H=39 M=32 L=25 SNR=30
Robust headband retains shape. Ribbed air cushions for
cool comfort. Flexible and lightweight. Viscoelastic foam
cushions - better pressure distribution for more comfort.
Extra wide ear space
Manufacturer’s code: 6130
Code: 431339Pair
NEW
NEW
NEW
SNR
32
SNR
32
SNR
34
AlphaSota F3
Ear Defenders
APPROVED TO EN352-1:2002
SNR 32. Full integration with other PPE. Easy fold
for convenient storage. Metal free design making it
ideal for food applications
Code: 254173Pair
AlphaSota N4
Ear Defenders
APPROVED TO EN352-1:2002
SNR 32. Full integration with other PPE. Maintains
performance when using with safety helmets
Code: 254174Pair
AlphaSota H5
Ear Defenders
APPROVED TO EN352-1:2002
SNR 34. A high performance, comfortable ear
defender without the weight. Stylish orange and
black design. Full integration with other PPE
Code: 254175Pair
167

Hearing Protection
3M PELTOR X Series Ear Muffs
Protected wire head-band, building on the successful 3M Optime range.
• Lightweight dual moulded cups - maximum space inside helps minimise heat an moisture build-up
• Integrated design for increased robustness
• Colour-code easy recognition on site
• Electrically insulated headband
• Easy to clean
SNR
33
SNR
33
3M PELTOR X4A Ear Muffs
CONFORMS TO EN 352-1 H= 36, M = 30, L = 22 SNR= 33
• For high noise levels, ultra slim/lightweight design
• Colour: Bright Green
Code: 254153 Manufacturer’s code: XA007706931 Pair
3M PELTOR X3A Ear Muffs
CONFORMS TO EN 352-1 H= 35, M = 30, L = 25 SNR= 33
• For high noise levels, E.g. Heavy engineering
• Colour: Red
Code: 254152 Manufacturer’s code: XA007706915 Pair
SNR
31
SNR
27
168
3M PELTOR X2A Ear Muffs
CONFORMS TO EN 352-1 H= 34, M = 29, L = 20 SNR= 31
• For moderate to high noise levels, E.g. Construction
• Colour: Yellow
Code: 254151 Manufacturer’s code: XA007706899 Pair
3M PELTOR X1A Ear Muffs
CONFORMS TO EN 352-1 H= 32, M = 24, L = 16 SNR= 27
• For light industry noise, E.g. Grounds maintenance
• Colour: Green
Code: 254150 Manufacturer’s code: XA007706873 Pair

Standard Ear Muffs
SNR
27
SNR
26
NEW
SNR
19
NEW
SNR
30
Hearing Protection
KeepSAFE Blue Cyclone
Ear Muffs
CONFORMS TO EN 352-1 O
VER THE HEAD H=33 M=25 L=17 SNR=27
BEHIND THE HEAD H=31 M=23 L=16 SNR=26
Acoustic foam fill – good, effective protection across
wide range of frequencies. For manufacturing industries,
agriculture, construction sites, food industry,
engineering. Figures for behind-the-head wearing are
available on request
• Colour: Blue
• Weight: 300g
Code: 254199Pair
AlphaSota L1
Ear Defenders
APPROVED TO EN352-1:2002
SNR 19. Very low attenuation ideal for protection
at the first action level. Blue in colour making them
ideal for food environment
Code: 254171Pair
AlphaSota M2
Ear Defenders
APPROVED TO EN352-1:2002
SNR 30. A high performance, comfortable ear
defender without the weight.
Full integration with other PPE
Code: 254172Pair
SNR
24
NEW
NEW
Lightweight Target Earmuff
Lightweight and comfortable. Acoustic foam fill.
Suitable for where noise is a problem or nuisance
rather than a hazard
• SNR 24
Code: 430201Pair
Centurion Scala X Ear Defenders
SNR LEVEL: 25DB. APPROVED TO EN 352
Suitable for most general requirements
(replaced the Baltic)
• Colour: White
Code: 254255
Manufacturer’s code: S71CE
Centurion Scala XI Ear Defenders
SNR LEVEL: 30DB. APPROVED TO EN 352
Excellent noise protection, especially for high
frequencies (replaced the Aegean)
• Colour: White
Code: 254412
Manufacturer’s code: S72CE
169

Harness & Safety Equipment
Buying Guide
Managing and Selecting Equipment
The work at height regulations 2005 requires employer’s to do all that is reasonably practicable
to prevent anyone falling.
Employer’s and those in control of any working at height activities, must ensure work is properly
planned and supervised. This includes using the correct type of equipment for working at height.
Low risk tasks that are relatively straight forward will be less challenging, when it comes to planning.
Employer’s and those in control must assess the risks first before carrying out any work.
Employer’s must:
• Take a sensible, practical approach when considering equipment for work at height
• Factors to weigh up include; The height of the task, the duration and frequency,
and the condition of the surface being worked on
There will also be certain low-risk situations where common sense tells you no particular
precaution is necessary.
How Do You Select The Right Equipment?
When selecting equipment for work at height, employers must:
• Provide the most suitable equipment appropriate for the work
• Take account of factors such as the working conditions, the nature, frequency and duration
of the work
If you are unsure which type of equipment to use, once you have considered the risks,
please contact our sales team who will be happy to help.
Health & Safety
Fall from height remains one of the most
common causes of serious injury and death
in the industry today. This fact, coupled with
tightening regulations governing working at
height, results in a greater need to consider
how to protect those exposed to potential
injury from a fall.
How To Make Sure The Equipment Is In Good Condition?
Work equipment, for example scaffolding, needs to be assembled or installed according to the
manufacturer’s instructions and in keeping with the industry guidelines.
Where the safety of the work equipment depends on how it has been installed or assembled, an
employer should ensure it is not used until it has been inspected in that position by a competent
person. A competent person is someone who has the necessary skills, experience and knowledge
to manage health and safety.
Inspection should be carried out every time something happens that may affect the safety and
stability of the equipment, eg adverse weather.
Training
Working at height is one of the most hazardous environments you can find yourself in. The Fall
Protection and Rescue equipment needed to ensure safe working can be confusing, leading to
either mis-specification or misuse of product. Under the Work at Height Regulations 2005, anyone
working at height is required to be trained in the use and daily inspection of their fall protection
equipment, as well as work at height safety procedures and rescue.
With the help of our preferred suppliers, we offer a full range of fall protection and rescue
training and consulting. Training can be provided in either open enrolment format or companyspecific
site courses, to suit your needs. Please contact us for more details and to discuss
your specific requirements.
170

Harness & Safety Equipment
Harness & Safety Equipment
171

Harness & Safety Equipment
Miller ®
Fall Protection
Synonymous with quality and a focus on innovation, Miller Fall Arrest products provide companies
with an immediate selection of fall protection equipment suited to their requirements.
Conveniently packed in back packs or small carrying cases, all kits conform to EN 361.
H-Design Duraflex Bodyfit
CONFORMS TO EN361/358
2-point harness with stretch shoulder webbing, mating
buckles on chest and leg straps, front and rear D-ring
anchorage points, and work positioning belt with side
D-rings
Size: 1, 2, 3
Manufacturer’s code: 1033532/3/4
Code: 431600
H-Design Duraflex
CONFORMS TO EN361
2-point harness with stretch shoulder webbing, mating
buckles on chest and legs straps, front and rear D-ring
anchorage points
Size: 1, 2, 3
Manufacturer’s code: 1032867/8/9
Code: 431601
H-Design Duraflex
CONFORMS TO EN361
1-point harness with stretch shoulder webbing, mating
buckles on chest and legs straps, front and rear D-ring
anchorage points
Size: 1, 2, 3
Manufacturer’s code: 1032855/6/7
Code: 431602
172
Titan Mobile Platform Kit
1-point harness, 1m lanynard
Manufacturer’s code: 1034075
Code: 431603 Each £71.07
Backpack Kit
CONFORMS TO EN361 AND EN355
H-Design Duraflex 1-point harness (1032856), 2m elasticated Manyard (1005325) and backpack (1007067)
Manufacturer’s code: 1033870
Code: 431604

Fall Arrest Kits & Accessories
Harness & Safety Equipment
Universal Kit
CONFORMS TO EN361 AND EN360
H-Design Duraflex 1-point harness (1032860),
Turbolite personal fall limiter (1018013) and backpack (1007067)
Code: 431605 Manufacturer’s code: 1033776 Each £257.88
Fall Arrest Kit
CONFORMS TO EN361 AND EN355
H-Design Duraflex 1-point harness (1032856), lanyard c/w energy absorber and
50mm scaffold hook (1013430/1015140) and backpack (1007067)
Standard kit length - 2m
Code: 431606 Manufacturer’s code: 1034020 Each £139.84
NEW
Twin Manyard
CONFORMS TO EN355
Twin Manyard with galvanised connector
and 2 scaffold hooks (63mm)
Length: 1.5m
Manufacturer’s code: 1013970
Code: 431607 Each £208.17
Length: 2m
Manufacturer’s code: 1013491
Code: 431608 Each £219.97
ME86 Manyard
CONFORMS TO EN355
ME86 Manyard with scaffold hook
and galvanised connector
Length: 1.5m
Manufacturer’s code: 1005324
Code: 431609 Each £98.08
Length: 2m
Manufacturer’s code: 1005325
Code: 431610 Each £102.49
Shock Absorbing Lanyard
CONFORMS TO EN355
Shock Absorbing Lanyard, kemmantel rope,
2 x CS20 steel screwgate karabiners
Length: 1m
Manufacturer’s code: 1032366
Code: 431611 Each £57.63
Length: 1.5m
Manufacturer’s code: 1032367
Code: 431612 Each £59.62
Length: 2m
Manufacturer’s code: 1032368
Code: 431613 Each £64.13
Other connectors also available
HandZup
CONFORMS TO EN358
HandZup with twistlock karabiner, snaphook
and protective sleeve
Length: 2m
Manufacturer’s code: 1032097
Code: 431614 Each £129.15
SafEscape Elite
with Hoist & Handle
The next generation rescue solution. Complies
with the new EN 341/2011 standard. Thanks
to its durable high-quality anodized aluminium
housing, our units remains in optimum condition
of use, even in the toughest environments.
8000m descent for 100kg, maximum descent
height of 500m, use in emergency by 2 people
weighing up to 250kg. Recertification by factory
or Miller Service Point is required only after
seven years, thanks to its robust and highly
resistant components. Controlled rate descender
device with handwheel and fold-out handle
Supplied in red rope bag with rescue logo.
Further rope lengths available 40m – 200m
Rope Length: 20m
Manufacturer’s code: 1029150
Code: 802903
Rope Length: 30m
Manufacturer’s code: 1029151
Code: 802902
173

Washroom
174

Washroom
Washroom
175

Washroom
STEP 1 – PROTECT
176
Stokoderm Sun Protect 50 PURE
Broad spectrum SPF50 sunscreen for professional
use with UVA, UVB and UVC protection. A perfumefree,
water and sweat resistant SPF50 sunscreen for
professional use.To protect the skin from UVA, UVB and
UVC exposure
SPC100ML - Size:100ml tube
MOQ Carton of 12
Code: 548345
SPC1L - Size: 1L Cartridge
MOQ Carton of 6
Code: 548361
Deb Stoko
Sun Protect 1L Dispenser
1 litre, sealed cartridge dispenser that meets the distinct
needs of any workplace and public facility. For exclusive
use with Deb skin care products to create tailored skin
protection programmes
• SUN1LDSEN - Size: 1L Dispenser
• Packed in: Each
Code: 548259
Deb Stoko
Sun PROTECT Board
Help to protect your workforce from UV radiation by
raising awareness of the dangers of working in the sun.
Pre-assembled with Deb SunPROTECT 1 litre lockable
dispenser, a mirror for easy, application, a holder and
cards to display the daily local UV index level, and key
facts and statistics on skin cancer and instructions of
WHY, HOW and WHEN outdoor workers need to protect
themselves from the sun
• SSCSUN1EN - Size: 400 x 570 x 142mm
• Packed in: Each
Code: 548264

STEP 1 – PROTECT
Washroom
Stokoderm Protect PURE
Universal perfume-free, non-greasy pre-work skin cream
to help protect against contact with water and nonwater
based contaminants including oils and solvents
UPW100ML - Size: 100ml tube
MOQ Carton of 12
Code: 548314
UPW1L - Size: 1L cartridge
MOQ Carton of 6
Code: 548316
Travabon Classic
A specialist pre-work cream to protect against heavy oil
based and mechanical irritants. Silicone-free. Makes it
easier to clean your skin after contact with heavy-duty
contamination
TVC100ML - Size: 100ml bottle
MOQ Carton of 12
Code: 431562
Stokoderm Grip PURE
Specialist pre-work cream to protect against heavy
oil based and mechanical irritants and improve grip.
Provides extra protection against water and non-water
based contaminants. Can also be applied for use under
gloves
SGP100ML - Size: 100ml tube
MOQ Carton of 12
Code: 431564
SGP1L - Size: 1L cartridge
MOQ Carton of 6
Code: 431565
NEW
Stokoderm Frost
A special, easy to apply skin protection cream
for protection under cold conditions outside
and indoors (cold storage). High quality
ingredients protect and care for the skin
and help to maintain the skin‘s natural
barrier function
SFR100ML - Size: 100ml tube
MOQ Carton of 12
Code: 548291
Deb Stoko Protect 1L Dispenser
1 litre, sealed cartridge dispenser that meets the distinct
needs of any workplace and public facility environment.
For exclusive use with Deb skin care products to create
tailored skin protection programmes
• PRO1LDSEN - Size: 1L dispenser
• Packed in: Each
Code: 548384
Deb Mobile Skin Safety Centre
– Starter Pack
Includes one of each cartridge. A unique skin
safety solution for vehicles and areas of limited
space. Can be conveniently fitted inside vans
or work cabins. Dispenser unit to hold three
cartridges to Protect, Cleanse and Sanitise the
skin. Full cradle system including dispenser,
protective cream, hand cleanser and sanitiser
• DCSP01PR
Code: 510038
177

Washroom
STEP 2 – CLEANSE LIGHT / SHOWER
Estesol Lotion
Light duty lotion hand cleanser for regular use
to remove general industrial dirt and grime.
Suitable for use in any industrial environment
LTW2LT - Size: 2L cartridge
MOQ Carton of 4
Code: 548346
Estesol Lotion PURE
Perfume-free and dye-free light duty lotion hand cleanser for regular use to remove
general dirt and grime. Suitable for general industrial and food manufacturing/
processing environments
PUW1L - Size: 1L cartridge MOQ Carton of 6
Code: 548975 Each £8.64
PUW2LT - Size: 2L cartridge MOQ Carton of 4
Code: 548370 Each £9.77
PUW4LTR- Size: 4L cartridge MOQ Carton of 4
Code: 548375 Each £18.43
178
Estesol Hair & Body
Pleasantly fragranced rich all over hair & bodY shower gel. For use any in any
workplace, leisure or hospitality shower facility. Suitable for use in both male and
female shower areas
HAB1L - Size: 1L cartridge MOQCarton of 6
Code: 519271
HAB2LT - Size: 2L cartridge MOQCarton of 4
Code: 519274
HAB4LTR- Size: 4L cartridge MOQCarton of 4
Code: 431579
Deb Stoko Cleanse Light 1L Dispenser
Unique range of 1 litre, 2 litre and 4 litre closed, sealed cartridge dispensers that
meet the distinct needs of any workplace and public facility environment. For exclusive
use with Deb skin care products to create tailored skin protection and hand hygiene
programmes
LGT1LDSEN - Size: 1L dispenser Packed in: Each
Code: 431856 Each £14.10
LGT2LDPEN - Size: 2L dispenser
Code: 548371
LGT4LDREN - Size: 4L dispenser
Code: 548374
Packed in: Each
Packed in: Each

STEP 2 – CLEANSE MEDIUM / WASHROOM
Washroom
Refresh Clear FOAM
Perfume-free and dye-free
mild foam soap. For use in
any washroom / toilet areas in
offices & public facilities and in
food handling environments
CLR1L - Size 1L cartridge
MOQ Carton of 6
Code: 548964
Refresh Azure FOAM
Lightly perfumed gentle
foam hand wash. Pleasantly
fragranced mild foam soap. For
use in any washroom / toilet
areas in offices and public
facilities
AZU1L - Size: 1L cartridge
MOQ Carton of 6
Code: 548962
AZU2LT- Size: 2L cartridge
MOQ Carton of 4
Code: 548963
Refresh Relax FOAM
Fragrant foam hand wash with
a rich blend of pure essential
oils. For use in any washroom /
toilet areas in offices and public
facilities
RLX1L - Size: 1L cartridge
MOQ Carton of 6
Code: 519259
Refresh Energie FOAM
Fragrant foam hand wash with
a rich blend of pure essential
oils. For use in any washroom /
toilet areas in offices and public
facilities
ENG1L - Size: 1L cartridge
MOQ Carton of 6
Code: 519260
Deb Stoko Cleanse
Washroom 1L
Dispenser
1 litre, sealed cartridge
dispenser that meets the
distinct needs of any workplace
and public facility environment.
For exclusive use with Deb
Cleanse Washroom foam soaps
• WRM1LDSEN
- Size: 1L dispenser
• Packed in: Each
Code: 548946 Each £9.77
STEP 2 – CLEANSE HEAVY
Solopol Lime
Patented combination of
natural cornmeal and light lime
extracts. For use at the end
of each work period, or more
frequently if required, to remove
heavy industrial soilings, such
as oil and grease, as well as
general dirt and grime
LIM2LT - Size: 2L cartridge
MOQ Carton of 4
Code: 548377
LIM4LTR - Size: 4L cartridge
MOQ Carton of 4
Code: 548378
Solopol Classic
Solvent-free hand cleansing
paste, for removal of heavy
duty contaminants. A
traditio+K152nal, solventfree,
pH skin neutral hand
cleanser containing scrubbing
agent. It features a powerful
cleansing action coupled with
very good skin compatibility.
Solopol ® Classic contains a skin
protectant and re-fatting agent
SOL2LT - Size: 2L cartridge
Packed in: Cartons of 4
Code: 548293
SOL4LTR - Size: 4L cartridg
Packed in: Cartons of 4
Code: 012817
Kresto Citrus
Powerful citrus hand cleanser
with Deb’s unique patented
combination of orange oil
extracts and cornmeal hand
scrub. For use at the end of
each work period, or more
frequently if required, to remove
a broad spectrum of deeply
ingrained and difficult to remove
soilings such as tar, inks,
bitumen, many adhesives, most
oil based paints, oil, grease and
grime
CIT2LT - Size: 2L cartridge
MOQ Carton of 4
Code: 548376
CIT4LTR - Size: 4L cartridge
MOQ Carton of 4
Code: 548379
Deb Stoko Cleanse
Heavy 2L Dispenser
Unique range of 2 litre and 4
litre closed, sealed cartridge
dispensers that meet the
distinct needs of any workplace
and public facility environment
For exclusive use with Deb skin
care products to create tailored
skin protection and hand
hygiene programmes
HVY2LDPEN - Size: 2L
dispenser
Packed in: Each
Code: 548372
HVY4LDREN - Size: 4L
dispenser
Packed in: Each
Code: 548373
Kresto Special ULTRA
Specialist ultra hand cleanser,
to remove paints, lacquers
and adhesives. Non-soapy
special hand cleanser with a
very powerful cleansing action
for the removal of especially
stubborn contamination.
Particularly good skin
compatibility within the
product class of “special hand
cleansers”
KSP4LTR - Size: 4L cartridge
MOQ Carton of 4
Code: 431587
179

Washroom
STEP 2 – CLEANSE ANTIMICROBIAL / SANITISE
OxyBAC FOAM Wash
A highly effective, perfume-free broad
spectrum antibacterial foam hand
wash combining. Accelerated Hydrogen
Peroxide ® with Deb Foam Technology .
For general use hand washing in food
& catering environment, or any other
workplace, social care or public facility
where a high level of hand hygiene
is required. Kills 99.999% of many
common bacteria
OXY1L - Size: 1L cartridge
MOQ Carton of 6
Code: 548401
OxyBAC Extra FOAM Wash
A highly effective, perfume-free broad spectrum antibacterial foam
hand wash combining. Accelerated Hydrogen Peroxide ® with Deb Foam
Technology and DoubleDOSE Pump. For hygienic hand washing in
‘high-risk’ food industry environments where: 1) a high standard of
biocidal efficacy is required to kill pathogens potentially detrimental
for food safety; and 2) provide a high level of cleaning performance
to remove greasy contaminants, such as vegetable and animal oils;
greases and fats; as well as food ingredients and mixes, including flour,
pastry and dough
OXYEX1L - Size: 1L cartridge MOQ Carton of 6
Code: 548403
OXYEX2LT - Size: 2L cartridge MOQ Carton of 6
Code: 548404
Deb Stoko Antimicrobial 1L Dispenser
Unique 1 litre closed, sealed cartridge dispensers that
meet the distinct needs of any workplace and public
facility environment. For exclusive use with Deb skin
care products to create tailored skin protection and
hand hygiene programmes
ANT1LDSEN - Size: 1L dispenser
Packed in: Each
Code: 548405
180
Deb InstantFOAM Complete
Highly effective broad spectrum alcohol based hand sanitiser dispensed as a foam.
99.999% effective against many common bacteria and proven to be fully virucidal.
Ideal for use in all healthcare and food handling environments where high levels of
hand hygiene are vital. Also, suitable for use in cafeterias, office areas, rest areas
and any public facility to help prevent the spread of germs
DIS47ML - Size: 47ml bottle MOQ Carton of 12
Code: 548388 Each £2.77
DIS250ML - Size: 250ml bottle MOQ Carton of 12
Code: 548387
DIS400ML - Size: 400ml bottle MOQ Carton of 12
Code: 548084
DIS1000ML - Size: 1L cartridge MOQ Carton of 6
Code: 548086
Deb Stoko Sanitise
1L Dispenser
1 litre, sealed cartridge dispenser
that meets the distinct needs of
any workplace and public facility
environment. For exclusive use
with Deb skin care products to
create tailored skin protection and
hand hygiene programmes
SAN1LDSEN - Size: 1L dispenser
Packed in: Each
Code: 548391

STEP 3 – RESTORE
Washroom
Stokolan Light PURE
A mild, perfume-free and dye-free non-greasy afterwork
conditioning cream to help maintain healthy skin
and avoid dryness. For use at the end of each work
period to moisturise the skin whilst natural oils are being
replenished. Suitable for use on dry, sore, chapped or
normal skin
RES100ML - Size: 100ml tube
MOQ Carton of 12
Code: 431588
RES1L - Size: 1L cartridge
MOQ Carton of 6
Code: 548315
Stokolan ® Sensitive PURE
Perfume-free and colourless skin care cream without
preservatives, particularly suited for the treatment
of sensitive and allergy prone skin types. Stokolan ®
Sensitive PURE supports the natural skin‘s barrier,
promotes skin regeneration and smoothes the skin.
The high amount of moisturising elements and skin
conditioning ingredients such as the skin’s own energy
booster, creatine, supports and strengthens the skin’s
defence system
SSP100ML - Size: 100ml tube
MOQ Carton of 12
Code: 548295
SSP1L - Size: 1L cartridge
MOQ Carton of 6
Code: 431592
Deb Stoko Restore 1L Dispenser
1 litre, sealed cartridge dispenser that meets the distinct
needs of any workplace and public facility environment.
For exclusive use with Deb skin care products to create
tailored skin protection and hand hygiene programmes
RES1LDSEN - Size: 1L dispenser
Packed in: Each
Code: 548385
181

Washroom
DEB STOKO SKIN SAFETY CENTRES
Deb Stoko Skin Protection Centre - Small
Robust, light-weight board that is ready-assembled with appropriate Deb Stoko
dispensers. For use with Deb Stoko products to create a tailored skin care system
• SSCSML1EN - Size: 590mm wide x 510mm high
• Contains: 1 x Deb Protect 1000, 1 x Deb Cleanse Heavy 2000
and 1 x Deb Restore 1000 dispensers
• Packed in: Each
Code: 431595
Skin Safety Cradle for Mobile Workers
A unique skin safety solution for vehicles and areas of limited space,
the Deb Skin Safety Cradle is a compact and complete 3-step skin care system. It
can be conveniently fitted inside vans or work cabins and contains everything needed
to protect, cleanse and sanitise the skin. The products do not require running water.
The dispensing unit holds all three cradle cartridges. The unit is tough and made from
robust plastic for high durability. No mechanical parts, means low maintenance. Unit is
pre-drilled in four places for ease of fixing (Cartridges supplied separately)
• ACC729 - Size: Cradle dimensions: 260(h) x 307(w) x 93(d)mm
• Packed in: Each
Code: 510034
Deb Stoko Skin Protection Centre - Large
• SSCLGE1EN - Size: 800mm wide x 570mm high
• Contains: 1 x Deb Protect 1000, 1 x Deb Cleanse Light 2000, 1 x Deb Cleanse
Heavy 4000 and 1 x Deb Restore 1000 dispensers
• Packed in: Each
Code: 548343 Each £108.35
NEW NEW NEW
Deb Protective
Cream
Oil | Grease | General Grime
| Acqueous Solutions
General purpose
protection against both
oil and water based
contaminants. Contains
Benzalkonium Chloride
which is effective against
Leptospira interrogans
Icterohaemorrhagiae RGA,
known to cause Weils
Disease. Contains emollient
to moisturise the skin and
help prevent dryness
• CRC34O - Size: 700ml cartridge
• MOQ Carton of 6
Code: 510037
Deb Hand Cleaner
Oil | Grease | General
Dirt & Grime
Lime smooth cream hand
cleaner that can be used
without water. Easily wipes
away with paper towel, leaving
no oily residue. Contains
wheatgerm extracts to help
leave the skin soft and supple
• CRH36V - Size: 750ml
cartridge
• MOQ Carton of 6
Code: 510035
Deb Hand Sanitiser
Bactericidal | Virucidal |
Yeasticidal
Alcohol based gel instant
skin sanitiser. Dries quickly
on the skin and contains
Hamamelis to prevent skin
softening
• CRA36O - Size: 750ml cartridge
• MOQ Carton of 6
Code: 510036
182

SWARFEGA
Washroom
Swarfega Original Classic
Rapid action classic smooth green gel formula hand
cleanser with added conditioner which is easy to apply
and quick rinsing to remove ingrained oil, grease and
general grime Leaves the skin feeling smooth after use
SWA450MP - Size: 450ml pump top bottle
MOQ Carton of 6
Code: 510103
SWA45L- Size: 4.5L tub
MOQ Carton of 4
Code: 431862
Swarfega Orange
Advanced formulation hand cleaner with polygrains.
Natural citrus oil removes oil, grease and general
soilings quickly and efficiently. Contains moisturiser to
help care for skin. The pump encourages controlled
dosages, one push is enough for a hand wash and
prevents product from crosscontamination
SOR4LMP - Size: 4L pump top bottle
MOQ Carton of 4
Code: 510130 Each £20.52
SORC4LTR - Size: 4L cartridge
MOQ Carton of 4
Code: 510811 Each £28.84
SOR15L - Size: 1.5L pail
Packed in: Each
Code: 510132 Each £69.62
Swarfega Heavy
Heavy duty gel formula hand cleaner containing nonabrasive
micro-polymer granules and added conditioner
to quickly remove deeply ingrained oil and grease
soilings. Leaves skin feeling smooth after use
SHD45L - Size: 4.5L tub
MOQ Carton of 4
Code: 510150
SHD125KG - Size: 15L pail
Packed in: Each
Code: 510151
Swarfega Lemon
Solvent-free lemon hand cleaner which includes natural
cornmeal hand scrub to remove oil, grease and general
soilings quickly and effectively. Contains moisturiser
to help care for skin. The pump encourages controlled
dosages, one push is enough for a hand wash and
prevents product from cross-contamination
SWL4LMP: Size: 4L pump top bottle
MOQ4 Carton of 4
Code: 431864
SWL4LTR - Size: 4L cartridge
MOQ4 Carton of 4
Code: 510147
Swarfega Jizer
Parts degreaser that will quickly dissolve heavy deposits
of mineral oil, grease, tar, bitumen and waxes. Water
rinsable, can be used for removing oil and grease marks
from many floor surfaces, tar spots and oil from body
work and cleaning paint brushes
SJZ5L - Size: 5L tin
MOQ Carton of 4
Code: 516315
SJZ25L - Size: 25L tin
Packed in: Each
Code: 516320
Swarfega Duck Oil
A silicone-free, non-conductive, multi-purpose service
spray. Exceptionally low surface tension means it can
easily penetrate, lubricate and protect with no need to
dismantle machinery and parts
SDO500ML - Size: 500ml aerosol
MOQ Carton of 12
Code: 760696
SDO5L - Size: 5L spray bottle
MOQ Carton of 4
Code: 760684
183

First Aid
Buying Guide
Is Your First Aid Kit Up To Date?
BS8599-1 COMPLIANT - WORKPLACE KIT
In the past decade, workplace practice has radically changed in many industries. These changes in
working behaviour and environments have brought with them new risks and hazards for employees.
June 2011 saw the introduction of fresh, updated guidance that now accurately reflects best
practice. A new range of kits was introduced and the recommendations came into full force in
January of 2012. The new BS8599-1 kits represent a complete overhaul of the 1997 content and it
is now incumbent on all businesses to review their first aid kits to ensure they remain fit for purpose.
You should use the guide below, together with your risk assessment, to decide on the size and
placement of first aid kits in your workplace.
Employers are required
to undertake a risk
assessment to determine
what the hazard levels are
and how many employees
are involved in the specific
area to be covered.
Here is a useful guide
provided to help you match
the assessment to an
appropriate kit.
CATEGORY OF HAZARD
LOW HAZARD
E.G. Shops, offices, libraries etc.
HIGH HAZARD
E.G. Light engineering and
assembly work, food
processing, warehousing,
extensive work with
dangerous machinery or sharp
instruments, construction,
chemical manufacture etc.
No. OF
EMPLOYEES
Less than 25
25-100
More than 100
Less than 5
5-25
More than 25
SIZE OF FIRST
AID KITS
Small
Medium
Large (1 per 100
employees)
Small
Medium
Large (1 per
25 employees)
Health & Safety
The Health and Safety (First Aid) Regulations 1981
require you to provide adequate and appropriate
first-aid equipment, facilities and people so your
employees can be given immediate help if they are
injured or taken ill at work.
What is ‘adequate and appropriate’ will depend
on the circumstances in your workplace and you
should assess what your first aid needs are.
The minimum first aid provision on any
work site is:
• A suitably stocked first-aid box
• An appointed person to take charge of the
first aid arrangements
• Information for employees about first
aid arrangements
It’s is important to remember that accidents and
illnesses can happen at any time. First aid provision
needs to be available at all times to people that
are at work.
The contents of the first aid containers should
be examined frequently and restocked after use.
Sufficient back up supplies should be held on site.
Torch First Aid Kit
See page 186
184

First Aid
First Aid
185

First Aid
HSE First Aid Kits
Standard HSE 10-Person First Aid Kit
For small shops, offices, libraries. Polypropylene box
with wall fixing bracket. Size: 180×270×90mm
Code: 254868 Each £25.16
Standard HSE 20-Person First Aid Kit
For light engineering, assembly work, warehousing
(perhaps with fewer than 20 people). Polypropylene
box with fixing bracket. Size: 225×275×90mm
Code: 254865 Each £37.72
Standard HSE 50-Person First Aid Kit
For construction sites, manufacturing, engineering
workshops. Polypropylene box with carrying handle
and wall bracket. Size: 255×345×100mm
Code: 254864 Each £65.21
Lyon Fast Response
First Aid Kit
For major incidents and emergencies.
Essential in high risk or expansive
working areas. Size: 370x370x90mm
Code: 254968 Each £50.87
BS 8599-1 Integral Aura Small
First Aid Kit
Low Risk: 1 kit per 1 – 25 employees
High Risk: 1 kit per 1 – 5 employees
Size: 225×235×100mm
Manufacturer’s code: 330
Code: 254813
BS 8599-1 Integral Aura Medium
First Aid Kit
Low Risk: 1 kit per 25 – 100 employees
High Risk: 1 kit per 5 – 25 employees
Size: 280×300×105mm
Manufacturer’s code: 343
Code: 254814
BS 8599-1 Integral Aura Large
First Aid Kit
Low Risk: 1 kit Per 100 employees
High Risk: 1 kit Per 25 employees
Size: 330×360×105mm
Manufacturer’s code: 348
Code: 254815
186
Torch First Aid Kit
Ideal for camping or driving. Impact resistant plastic
case with carry handle. Integrated torch
Manufacturer’s code: 3060
Code: 254882
Van and Truck First Aid Kit
Neat, small polypropylene box. Clip-on mounting
bracket for fixing into a vehicle. Size: 180×130×70mm
Code: 254809 Each £28.14
First Aid Burns Kit
A compact, modern comprehensive burns kit.
Ideal for small offices, kitchens or other areas where
burns present a hazard. Includes adult foil blanket. Size:
167x229x42mm
Code: 254960 Each £23.20

HSE First Aid Kits
First Aid
Reliwash Eye Wash First Aid Kit (Double)
904 - 2×500ml bottles, 2×20ml eye pods, 2×eye pads, mirror. Size:
280×300×105mm
Code: 254699 Manufacturer’s code: 904 Each £43.46
Reliwash Eye Wash First Aid Kit (Triple)
903 - 3×500ml saline eye wash, 3×eye pad dressings. Size: 280×300×105mm
Code: 254691 Manufacturer’s code: 903 Each £44.69
Winter Care Kit
Car essentials in the cold. Winter car essentials to keep you moving. Life saving
contents, including first aid. Useful items in emergency or breakdown. Packed in a
stylish box
Code: 254688 Manufacturer’s code: 2036 Each £40.74
Complete Refill for Standard First Aid Kit
10 Person
Code: 254866 Manufacturer’s code: 121 Each
20 Person
Code: 254869 Manufacturer’s code: 122
50 Person
Code: 254873 Manufacturer’s code: 123
HSE Single Person First Aid Kit
Vinyl wallet – for anyone working away from base.
All representatives, delivery drivers, council workers etc.
must be provided with a first aid kit. Size: 160×180mm
Code: 254867 Each £21.50
Travel Pouch First Aid Kit
Handy general purpose first aid kit,
easily fitting a car. More than covers HSC requirements
for one person. Washable nylon fabric bag, zip closure.
Size: 121×193×52mm
Code: 254810 Each £20.57
Eye Wash Kits
Premier Eye Wash Station
Robust dual purpose HSE compliant
eye wash station. Illuminated printed instructions.
Dustproof heavy-duty cover. Wipe clean
hardwearing ABS Plastic. 2×saline eyewash 500ml,
2×eyepad dressings, 5×pods 20ml, mirror. Size:
360×510×100mm. Colour: Green/Clear Lid
Manufacturer’s code: 919
Code: 254696
Emergency Eye Wash Station
Holds 2×500ml sterile saline solution eye wash bottles,
2×eye pad dressings, mirror. Panel with printed
instructions. Size: 270×375×50mm
Manufacturer’s code: 906
Code: 254697
Eye Pod Station
High visibility eye pod station with printed
instructions. Holds 8×20ml sterile saline solution
eye pods, 2×eyepad dressings, mirror. Supplied
empty as a panel. Eye pods should never be used
for emergency use. Use for minor eye irritations only.
Size: 245×330×25mm
Manufacturer’s code: 249
Code: 254689
187

First Aid
First Aid Consumables
KeepSAFE
Fabric First Aid Plasters
Assortment containing: 30 of
25×50mm, 30 of 20×70mm, 30 of
40×40mm,10 of 50×75mm.
Box of 100
Manufacturer’s code: 516
Code: 254800
KeepSAFE
Wash Resistant Plasters
Assortment containing: 30 of 25×50mm,
30 of 20×70mm,
30 of 40×40mm, 30 of 50×75mm.
Box of 100
Manufacturer’s code: 536
Code: 254801
KeepSAFE
Detectable Plasters for Food
Preparation Areas
Metal detectable washproof plasters.
Sterile and individually wrapped.
Low allergy, latex free each pack
contains: 30 of 25×75mm,
30 of 20×70mm, 30 of 40×40mm,
10 of 50×75mm
Manufacturer’s code: 546
Code: 254802
Easi-Plaster Roll
Fast, easy alternative to plasters.
Easy-tear to size, waterproof plasters.
Adhesive Free
Code: 254972
Sterile Dressings
All dressings are HSE compliant
Medium. Size: 120×120mm
Manufacturer’s code: 316
Code: 254884 Each £0.64
Large. Size: 180×180mm
Manufacturer’s code: 317
Code: 254859 Each £1.12
No. 16 Eye Pad Sterile
Dressing
Triangular Bandage
Size: 90×1270mm
Manufacturer’s code: 411
Code: 254687 Each £0.56
Reliwipe Sterile
Cleaning Wipes
Moist saline cleansing wipes.
Box of 100
Manufacturer’s code: 745
Code: 510175 Box of 100 £21.65
Emergency Foil Blanket
For Adults
Disposable, ultra-insulating emergency
blanket. Both sides have heat-reflective
metallic surface. Retains over 90%
of body heat. Retains most radiated
body heat. Also protects against wind,
rain. Ideal for treating or preventing
hypothermia.
Size: 1950×1200mm (78×48")
Manufacturer’s code: 760
Code: 254838 Each £6.58
Manufacturer’s code: 321
Code: 254857 Each £0.66
Reliwash Saline Eye Wash
Bottle with Eyewash Bath Lid
- 500ml
Manufacturer’s code: 2990
Code: 254693 Each £6.38
Antiseptic Wipes
Individually sealed sachets of moist
tissues impregnated with antiseptic
ingredients. Hygienically cleans the skin.
Protects against germs. Convenient, easy
to use. Pack of 10
Code: 548273 Pack of 10 £2.67
Reliwash Saline Eye Wash
Solution - 500ml
Manufacturer’s code: 900
Code: 254695 Each £5.45
Reliwash Sterile Saline Pods
- 20ml
Pack of 25
Manufacturer’s code: 901
Code: 254834 Pack of 25 £21.21
First Aid Accident
Report Book
Forty forms on perforated pages.
Confidential storing of completed
records. In line with the Data Protection
Act 1998. Size: A4
Code: 254971 Each £9.26
Metal Lockable Cabinet HSE
50-Person Plus First Aid Kit
Wall-mounting, lockable metal cabinet.
For construction, chemical, dangerous
machinery sites. High specification.
Standard 50 kit plus extras, Inc. 2×foil
emergency blankets.
Size: 450×300×120mm
Code: 254872 Each £152.74
188

Index
Index
3M Air Fed System . . . . . . . . . . 108-112
3M Protective Coveralls. . . . . . . . . . . . 13
3M Disposable Masks . . . . . . . . . . 90-97
3M Face Fit Testing Kits. . . . . . . . . . . 119
3M E.A.R Hearing Protection . . . . . 156-162
3M Jupiter Respirator. . . . . . . . . . . . 110
3M Peltor Hearing Protection . . . . . 165-168
3M Powered Air. . . . . . . . . . . . .108-112
3M Radio Headsets . . . . . . . . . . . . . 165
3M Versaflo . . . . . . . . . . . . . . 109-112
A
Alpha Solway Disposable Coveralls. . . . . . 16
Alpha Solway Ear Muffs . . . . . . . .167-169
Ansell Hand Protection . . . . . . . . . .36-63
Ansell Disposable Gloves . . . . . . . . .56-57
Ansell Chemical Gloves . . . . . . . . . . . . 59
Ansell Microchem Coveralls . . . . . . . . . 15
Ansell Microgard Coveralls . . . . . . . . . .15
Anti-impact Gloves . . . . . . . . . . . . . .49
Anti-vibration Gloves . . . . . . . . . . . 48-49
B
Bandages . . . . . . . . . . . . . . . . . . 188
Banded Ear Plugs . . . . . . . . . . . . . . 164
Beard Masks . . . . . . . . . . . . . . . . . 19
BlazeTEK Flame Retardant Clothing . . . .9-10
Body Warmers . . . . . . . . . . . . . . . . 25
Bolle Eyewear Accessories . . . . . . . . . 143
Bolle Prescription Eyewear . . . . . . . . . 141
Bolle Safety Eyewear . . . . . . . . . 122-141
Bolle Safety Goggles . . . . . . . . . 134-1402
Bolle Welding Safety Eyewear & Helmets . 138
Boot Polish . . . . . . . . . . . . . . . . . . 87
Boots, Safety . . . . . . . . . . . . . . . 66-73
Boots, Wellingtons . . . . . . . . . . . . 80-83
Browguard . . . . . . . . . . . . . . .136-137
Bump Caps . . . . . . . . . . . . . . . . . 153
C
Canadian Style Rigger Gloves. . . . . . . . . 45
Catersafe . . . . . . . . . . . . . . . . . 18-19
Caps, Bump. . . . . . . . . . . . . . . . . 153
Centurion Air Powered Kits . . . . . . . . . 115
Centurion Forestry Protection. . . . . . . . 149
Centurion Helmet Accessories . . . . .147-150
Centurion Safety Baseball Bump Caps . . . 153
Centurion Safety Helmets. . . . . . . .146-149
Centurion Scala . . . . . . . . . . . . 150, 169
Chemical Resistant Gloves . . . . . . . .59-61
Chemical Resistant Coveralls . . . . . . . 11-16
Clothing and Workwear . . . . . . . . . . 20-33
Cold Handling Gloves . . . . . . . . . . . . .63
Cold Weather Hoods . . . . . . . . . . . . 152
Communication Headsets. . . . . . . . . . 165
Concept Air Systems . . . . . . . . . . . . 115
Cotton Gloves . . . . . . . . . . . . . . . . .44
Coveralls . . . . . . . . . . . . . . . . .27-31
Cut Resistant Gloves . . . . . . . . . . . 50-53
Cut Resistant Gloves - Kevlar. . . . . . . . . 53
Cut Resistant Colour Coded Gloves . . . . 50-51
Cut Resistant Sleeves. . . . . . . . . . . . . 53
D
Deb Cradle System . . . . . . . . . . . . . 182
Deb Skincare System . . . . . . . . . .176-182
Detectable Ear Plugs . . . . . . . . . . . . 161
Dewalt Safety Footwear. . . . . . . . . . 73-76
Disposable Coveralls . . . . . . . . . . . 11-16
Disposable Gloves . . . . . . . . . . . . 56-58
Disposable Masks. . . . . . . . . . . . . 90-97
Disposable Overshoes . . . . . . . . . . 17-19
Drager Disposable Respirators . . . . . .90-97
Drager Parat Escape Hood . . . . . . . . . 118
Drager Powered Respirators . . . . . 116-117
Drager X-Plore . . . . . . . . . . . . . . . 103
Dry Helmet Cooling . . . . . . . . . . . . . 152
Dr. Martens Safety Footwear . . . . .73, 75-79
Dunlop Safety Wellingtons . . . . . . . . 81-83
DuPont, Tyvek Coveralls. . . . . . . . . . 11-13
DuPont, Tychem Coveralls . . . . . . . . . . 12
Duraflow Respiratory . . . . . . . . . . . . 113
E
Ear Muffs . . . . . . . . . . . . . . . 165-169
Ear Plugs . . . . . . . . . . . . . . . .156-161
Ear Plug Dispensers . . . . . . . . . .162-163
Electrical Insulating Gloves . . . . . . . . . .62
Elipse Respirators. . . . . . . . . . . . . 98-99
Endurance Workwear . . . . . . . . . . . 22-32
Endurance RainMaster . . . . . . . . . . . .32
Escape Hoods. . . . . . . . . . . . . .118-119
Executive Hi-Visibility Waistcoat . . . . . . . .7
Executive Shoes . . . . . . . . . . . . . . . 78
Eye and Face Protection . . . . . . . .120-143
Eyewear Accessories . . . . . . . . . 142-143
Eyewear, Safety . . . . . . . . . . . . .120-143
Eyewash Stations . . . . . . . . . . . . . . 187
F
Faceshields . . . . . . . . . . . . . . 136-137
Face Fit Testing Kits. . . . . . . . . . . . . 119
Fall Arrest Kits. . . . . . . . . . . . . .171-173
Filters . . . . . . . . . . . . . . . . . 106-107
First Aid . . . . . . . . . . . . . . . . 184-188
First Aid Kits. . . . . . . . . . . . . . .186-187
First Base 3 Bump Protection. . . . . . . . 153
Fit Test Kits . . . . . . . . . . . . . . . . . .18
Flame Retardant Workwear. . . . . . . . .9-10
Fleece Jackets . . . . . . . . . . . . . . 25-26
Foam Ear plugs . . . . . . . . . . . . 156-159
Foam Knee Pads . . . . . . . . . . . . . . . 33
Foam Nitrile Gloves . . . . . . . . . . . .37-40
Food Industry Clothing . . . . . . . . . . 18-19
Food Processing Gloves. . . . . . . . . . 54-55
Footwear Accessories. . . . . . . . . . . . . 87
Forestry Protection . . . . . . . . . . . . . 149
Foundry Safety Boots . . . . . . . . . . . . .72
Full Face Mask Respirators . . . . . . .103-105
G
Gauntlets . . . . . . . . . . . . . . . 46, 55-61
General Handling Gloves . . . . . . . . . 44-46
GO/RT Hi-Visibility Clothing . . . . . . . . . 7-9
Goggles & Visors . . . . . . . . . . . .134-140
Goggles - Non Vented. . . . . . . . . . . . 140
Goggles - Vented . . . . . . . . . . . . . . 139
GVS Elipse - Reusable Respirators
- Half Masks . . . . . . . . . . . . . . . 98-99
H
Hair Nets . . . . . . . . . . . . . . . . . . . 19
Half Mask Respirators . . . . . . . . . 98-103
Hand Protection. . . . . . . . . . . . . . 34-63
Hazard Workwear . . . . . . . . . . . . . .2-19
Head Protection . . . . . . . . . . . . .144-153
Hearing Protection . . . . . . . . . . .154-169
Heat Resistant Gloves. . . . . . . . . . . . . 62
Helly Hansen Polo Shirts . . . . . . . . . . . 22
Helly Hansen Jackets . . . . . . . . . . . 25-26
Helly Hansen Pants . . . . . . . . . . . . . .24
Helly Hansen Coveralls . . . . . . . . . . . .27
Helmet Accessories . . . . . . . . . . .147-150
Hi-Visibility Clothing. . . . . . . . . . . . .4-10
Honeywell Safety Faceshields . . . . . . . 137
Honeywell Gloves . . . . . . . . . . . . . 37-38
Howard Leight Hearing Protection . . .156-162
Hybrid Goggles/Spectacles . . . . . . . . . 135
I
Impacto Gloves . . . . . . . . . . . . . . 49
Impacto Knee Pads . . . . . . . . . . . . 33
Insoles . . . . . . . . . . . . . . . . . . . . 87
J
Jackets . . . . . . . . . . . . . . . . . . . .26
Jackets, Fleece . . . . . . . . . . . . . . . .25
Jackets, Hi-Visibility. . . . . . . . . . . . . 4-6
Juba Hand protection . . . . . . . . . . 37-639
Jupiter Powered Air Respirator . . . . . . . 110
189

Index
Index
K
Keep Safe Coveralls. . . . . . . . . . . . . . 16
Keep Safe Disposable Respirators . . . . 91-96
Keep Safe Ear Muffs . . . . . . . . . . . . 169
Keep Safe Hearing Protection. . . . . .164-169
Keep Safe Hi-Visibility Clothing . . . . . . 4-10
Keep Safe Gloves . . . . . . . . . . . . .36-63
Keep Safe Respirators . . . . . . . . . . 91-96
Keep Safe Safety Eyewear . . . . . . 130-137
Keep Safe Safety Goggles . . . . . . . . . 139
Keep Safe Safety Helmets . . . . . . . . . 148
Kevlar Gloves . . . . . . . . . . . . . . . . .53
Knee Pads. . . . . . . . . . . . . . . . . . . 33
L
Lab Coats . . . . . . . . . . . . . . . . .17-18
Ladies Safety Footwear . . . . . . . . . . 84-86
Ladies Workwear . . . . . . . . . . . . .28-29
Lanyards . . . . . . . . . . . . . . . .171-173
Latex Coated Gloves . . . . . . . . . . . . . 43
Lens Cleaning Accessories . . . . . . 142-143
M
Magnum Safety Footwear . . . . . . . . 70
Mechanics Gloves. . . . . . . . . . . . . 48
Microchem Ansell Coveralls. . . . . . . . . . 15
Microgard Ansell Coveralls . . . . . . . . . .15
Miller Fall Arrest Kits . . . . . . . . . .172-173
Modern Safety Spectacles . . . . . . .124-132
Moldex Disposable Respirators . . . . . . 91-97
Moldex Ear Muffs . . . . . . . . . . . . . . 167
Moldex Half Mask Respirators . . . . . . . 102
Moldex Hearing Protection . . . . . . 157-167
Moulded Ear Plugs . . . . . . . . . . . . . 160
N
Nitrile Coated Gloves . . . . . . . . . . .37-41
Nitrile Disposable Gloves . . . . . . . . .57-58
O
Overshoe - Safety. . . . . . . . . . . . . 17-19
Overboots - Tyvek. . . . . . . . . . . . . . . 17
Overshoes. . . . . . . . . . . . . . . . . 17-19
Oversleeves . . . . . . . . . . . . . . . . 17-19
Overspecs. . . . . . . . . . . . . . . . . . 133
P
Peltor Ear Defenders . . . . . . . . . .165-168
Personal Identification Systems. . . . . . . 151
Plasters . . . . . . . . . . . . . . . . . . . 188
Polo Shirts. . . . . . . . . . . . . . . . . . . 22
Polyco Grip it Gloves . . . . . . . . . . . . . 42
Polyco hand protection . . . . . . . . . .36-61
Premium Eyewear . . . . . . . . . . .122-123
Premium Safety Helmets . . . . . . . . . . 146
Prescription Eyewear . . . . . . . . . . . . 141
PU Coated Gloves . . . . . . . . . . . . . . . 36
Puncture Resistant Gloves . . . . . . . . 47-48
PVC Gauntlets. . . . . . . . . . . . . . . 45-61
Pyramex Eyewear. . . . . . . . . . . . . . 132
R
Radio Headsets . . . . . . . . . . . . . 165
Rail Hi-Visibility Clothing . . . . . . . . . .9-10
Rainwear . . . . . . . . . . . . . . . . . 30-31
Respair Disposable Respirators. . . . . . 90-97
Respirators . . . . . . . . . . . . . . . 90-119
Respiratory Protection . . . . . . . . . 90-119
Reusable Respirators
- Half Masks . . . . . . . . . . . . . . 98-103
Reusable Respirators
- Full Face Masks. . . . . . . . . . . .103-105
Rigger Boots . . . . . . . . . . . . . . . . . 74
Rigger Gloves . . . . . . . . . . . . . . . . .45
Riley Safety Eyewear . . . . . . . . . 124-135
Rock Fall Safety Footwear . . . . . . . . 66-86
S
S1P Safety Boots . . . . . . . . . . . . . 73
S3 Safety Boots. . . . . . . . . . . . .66-72
Safety Eyewear . . . . . . . . . . . . 120-143
Safety Footwear. . . . . . . . . . . . . . 64-87
Safety Goggles . . . . . . . . . . . . .134-140
Safety Harnesses . . . . . . . . . . . 172-173
Safety Helmets . . . . . . . . . . . . 146-149
Safety Lanyards. . . . . . . . . . . . .172-173
Safety Shoes . . . . . . . . . . . . . . . 78-79
Safety Trainers . . . . . . . . . . . . . . 76-77
Scott Aviva Half Mask. . . . . . . . . . . . 102
Scott Safety Bump Caps . . . . . . . . . . 153
Scott Respirators . . . . . . . . . . . 102-114
Scott Tornado . . . . . . . . . . . . . . . . 114
Scott Duraflow . . . . . . . . . . . . . . . 113
Segre Masks . . . . . . . . . . . . . . . 92, 96
Shirts, T . . . . . . . . . . . . . . . . . . . .22
Shoe and Helmet Sanitiser Spray. . . . . . . 87
Shoes Safety . . . . . . . . . . . . . . . 78-79
Showa Gloves. . . . . . . . . . . . . . . 38-61
Skytec Ninja Lite . . . . . . . . . . . . . . . 36
Skytec Ninja Flex . . . . . . . . . . . . . . .43
Skytec Utah . . . . . . . . . . . . . . . . . . 57
Socks . . . . . . . . . . . . . . . . . . . . .87
Specialist Handling Gloves . . . . . . . . 47-49
Spectacle Cases . . . . . . . . . . . .142-143
Swarfega . . . . . . . . . . . . . . . . . . 183
T
Thermal Gloves . . . . . . . . . . . . . . . .63
Tornado Respiratory System . . . . . . . . 114
Trousers, Work . . . . . . . . . . . . . . 23-24
T-Shirts . . . . . . . . . . . . . . . . . . . .22
Tuf Footwear . . . . . . . . . . . . . . . 66-80
Tychem Coveralls . . . . . . . . . . . . . 11-12
Tyvek Coveralls . . . . . . . . . . . . . .11-13
U
Uvex Footwear . . . . . . . . . . . . 67, 71, 85
Uvex Gloves . . . . . . . . . . . . . . . . 46-47
Uvex Hearing Protection . . . . . . . .158-161
Uvex Respirators . . . . . . . . . . . . . 92-95
Uvex Safety Eyewear . . . . . . . . . 123-140
Uvex Safety Eyewear Accessories . . . . . 142
Uvex Safety Spectacles & Goggles . . 123-140
V
Versaflo Supplied Air Respirator . . 109-112
Vinyl Disposable gloves . . . . . . . . . . . . 54
Visors . . . . . . . . . . . . . . . . . 136-137
W
Waders . . . . . . . . . . . . . . . . . . . . 80
Waistcoats, Hi-Visibility . . . . . . . . . . . 6-7
Washroom . . . . . . . . . . . . . . .174-183
Water Resistant Boots . . . . . . . . . . . . 66
Weather Wear. . . . . . . . . . . . . . . 30-31
Welding Gauntlets. . . . . . . . . . . . . . . 62
Welding Safety Eyewear & Helmets . . . . 138
Wellington Boots . . . . . . . . . . . . . 80-83
White Safety Footwear . . . . . . . . . . 79-80
Work Gloves. . . . . . . . . . . . . . . . . . 46
Workwear . . . . . . . . . . . . . . . . . 20-33
190