Interpretive & Wayfinding
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
What face materials are<br />
compatible?<br />
6mm Panel<br />
End cap<br />
Barrier Post 104<br />
You can use almost any material with a<br />
thickness ranging from 6mm to 43mm.<br />
This maximum thickness is unique to<br />
Barrier Post 104.<br />
A.<br />
104mm<br />
Internal groove<br />
Infill strip<br />
All face substrates can be directly<br />
printed onto.<br />
In addition to this we can cut almost any<br />
shape which opens up endless design<br />
options.<br />
All we need is sufficient anchor points<br />
to the post.<br />
43mm mitred framing<br />
Internal support<br />
Sign panel<br />
Post & frame can be clear anodised, powder<br />
coated or sprayed with 2-pack polyurethane.<br />
The face panel can be 6mm aluminium as<br />
shown in figure A. or 3mm composite or<br />
aluminium as shown in figure C.<br />
B.<br />
3mm Panel<br />
Internal groove infill strip<br />
RHS Steel support 25 x 50<br />
Concrete footing<br />
Reinforcing rod<br />
C.<br />
104mm<br />
www.barriersigns.com.au<br />
47